- observium - lists.observium.org

pps metic
by Matthias Cramer 16 Jul '16

16 Jul '16

Hi There Is there a metric for normal packets per second and not only unicast packets (ifInUcastPkts_rate) and also a metric for non unicast packets per second. According to the doc at http://www.observium.org/docs/entities/#metrics_1 this is not existent... I would like to make an alert on high pps and if possible on high non unicast pps. Any hint is appreciated. Regards Matthias -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zurich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250

2 3

Tripp-lite UPS Alerts
by Johnston, Tom 15 Jul '16

15 Jul '16

I’m trying to set up alerting for our tripplite when it goes on battery. I cannot get it to work properly for some reason. Entity Type: Status Check Conditions: upsOutputSource.0 ne normal Device Match: os eq poweralert Entity Match: * Observium Version: 0.16.7.7983 (professional) -A debug from observium yields a value of: upsOutputSource.0 = normal (the normal changes to state of “Battery” when on battery) -Even if I change my check conditions to eq normal to test the alert it does not trigger an alert. -I also tried check conditions of * and that did not help. Also we lost power and the event log showed the following: -Also tried just upsOutputSource (without the .0) Source of Output Power<http://epsobservium.isd273.org/device/device=337/tab=health/metric=status/i…> Status Alert: hs-6509-ups.isd273.org Source of Output Power entered ALERT state: battery (previous: normal) Any help would be appreciated -Tom

2 1

Setting up LDAP Auth
by Dano, Leo 15 Jul '16

15 Jul '16

Hello all, Anyone care to share your config settings? I am having a hard time setting this up. Please remove your domain info in the reply. /opt/observium/config.php Thanks, ----------------------- Leo Dano

8 20

Toner History Graphs
by Richard Franks 15 Jul '16

15 Jul '16

I have a bit of an odd one. I have two printers in my observium install. One has been in for ages (an HP laser jet), the other I added a couple of weeks ago (A sharp MFD photocopier thingy). By the looks of things, the HP has been collecting data correctly for ages, and graphing it nicely. I can see the pretty line that shows that the toner has reduced over time. Oddly, it stopped collecting on the 7th July, and hasn’t graphed anything since then. The Sharp, which has been in less time (since Thursday 7th), has never graphed its toner properly. They are both showing the correct level of toner (well, the Sharp is showing two of them at -3, but I’ve checked the snmp output, and it’s returning -3, so that’s nothing to do with observium). Even more weirdly, the toner level on the weekly graph is showing the correct number. The rest show -nan% The Sharp: The HP: I don’t know much about how the graphing side of things works, so I don’t have much knowledge with which to do any debugging, but happy to send more debug info if required! Thanks, Richard

1 0

Exim Volume Count
by Tiago Reis 15 Jul '16

15 Jul '16

Hi, There is anyone here that already create on the exim service for Observium something that reads the volume of sends an not the mail queue? Kind Regards, Tiago Reis

1 0

Incorrect free physical memory for Unix hosts
by Oliver Baker 15 Jul '16

15 Jul '16

Hi, Loving Observium in general but the only issue I'm having is that for all our Unix-like hosts the free memory is reported too literally to be useful. The cached memory pool is included in the "used memory" count, causing almost all our hosts to appear as having less than 5% free physical memory. Is there a way to get free memory not including the cached memory pool? Currently the alert checker I'm using is flagging all our hosts as "out of memory" Many thanks in advance Oliver B

3 8

Hello world
by Daniel Horth 14 Jul '16

14 Jul '16

Hi all I have some questions to ask however wanted to search archives first. Checking the archives page: http://postman.memetic.org/pipermail/observium/ seems to be cactus at the moment. Is this a known issue. Are there archives available anywhere else? Thanks Dan -- Daniel Horth AU +61 458 248 588 USA + 1 505 552 2074 Denmark + 45 50 22 89 55

3 4

Request for HWg-PWR MIB Support
by Gumilar Siegfried 12 Jul '16

12 Jul '16

Hello, could you please add support for the HWg-PWR Devices? http://www.hw-group.com/products/HWg-PWR/hwg-pwr25_M-bus_gateway_en.html You are already supporting another device from this manufacturer: http://jira.observium.org/browse/OBSERVIUM-512 :) Enclosed I am sending you the MIB File, snmpwalk output and the OID Table directly exported from the device GUI. Thanks in advance! Siegfried

1 0

Request for Nutanix MIB support
by Fredrik Winäs 12 Jul '16

12 Jul '16

Hi It would be awesome if there could be support for Nutanix on Observium. And their Hypervisor Acropolis (KVM based) https://portal.nutanix.com/#/page/docs/details?targetId=Web_Console_Guide-A… When I add my Nutanix CVM's (the controller VM that handles everything)it shows as a generic Linux machine. What can I do to help? Med Vänlig Hälsning Fredrik Winäs tel +46 31 762 02 43 fredrik.winas(a)cgit.se<mailto:fredrik.winas@cgit.se> www.cgit.se<http://www.cgit.se/> CGit AB Taljegårdsgatan 11C SE-431 53 Mölndal

2 3

Adding devices by IP address instead of hostname
by Darcy Marshall 09 Jul '16

09 Jul '16

Is there a way of adding devices to Observium by IP address (without having a FQDN with DNS for it)? If not, could I do it by editing the values in the database? — Spydar007

2 1