- observium - lists.observium.org

Brocade VDX Support?
by Aaron Mayfield 05 Mar '14

05 Mar '14

I notice my Brocade routers seem to work fine in Observium. What about VDX switches? Does anyone know if Observium can work with these? Currently evaluating switches for our network, and would like to know if this would be a possible issue... Thanks

3 3

Help - Syslog-NG
by Hardcastle, Iain (CBC - Hamilton) 04 Mar '14

04 Mar '14

Hi all, I have an observium system running quite happily. I've tried to integrate the syslogging functionality but getting strange results. Not sure whether the problem lies with syslog-ng, PHP or the sucking of data into Observium. Let me explain: With syslog-ng started in foreground mode 'syslog-ng -Fevd' everything works as expected. I see syslog packets coming in via tcpdump, I see the log flash up on the terminal and it correctly routes into the right part of the Observium front end. With syslog-ng started as a daemon (the desired config setup), nothing gets to Observium. I can still see the syslog packets in tcpdump obviously but I'm blind as to what happens to the messages after that. One thing I have noticed is that when running syslog-ng in foreground mode, I see "Starting destination program; cmdline='/opt/observium/syslog.php'" in the startup messages and a corresponding process in the ps -lax output "php /opt/observium/syslog.php" With syslog-ng started as a daemon, I do not see this php process. Bit stuck as to where to look next. Has anyone seen this behavior before? Centos6.5 and standard packages and configs. System works great otherwise/ Cheers iain Deloitte refers to one or more of Deloitte Touche Tohmatsu Limited, a UK private company limited by guarantee, and its network of member firms, each of which is a legally separate and independent entity. Please see http://www.deloitte.com/about for a detailed description of the legal structure of Deloitte Touche Tohmatsu Limited and its member firms.

1 0

How to disable the "Overall Peering" graph?
by Shane O'Brien 04 Mar '14

04 Mar '14

Hello! We are experiencing an issue where we currently have no peering traffic and our Overall Peering graph on our Observium landing page is broken. We'd like to remove it, but when we select the option to not display broken graphs. It removes all of our graphs and not just the single broken one. Any guidance or assistance is appreciated. -Shane

1 0

App Bind - No rrd file
by Maxence BITTERLI 04 Mar '14

04 Mar '14

Hi, I enabled bind apps on 2 servers but actually I got no rrd file on my observium server but on the web interface I can see both of them with pic embed but corrupted. Any clue ? Where should I check to try to debug it ? If I try telnet localhost 36602, I can see <<<app-bind-0>>> And I got 1185 lines for this apps, maybe my results is too long ? Maxence

1 0

change port name/description?
by Tom De Puysseleyr 04 Mar '14

04 Mar '14

Hi again, SNMP traps are working (thanks to the wiki), so now I can see nearly immediately when a port on a switch goes down. However, something like "Nortel Networks BayStack 5510-24T Ethernet Switch Module - Unit 1 Port 1" doesn't say much about what exactly went down. Just an idea: would it be possible to provide a way to edit the port names? Mvg, Tom De Puysseleyr Afdeling Informatica T +32 (0) 15 565 238 F +32 (0) 15 565 240 www.belorta.be Please consider the environment before printing this e-mail

5 5

Mempool updates every 6 hours?
by Matt Ladewig 01 Mar '14

01 Mar '14

This started on the 27th, on my hp gear. I believe I went from 5019 to 5050 around that time. Now at 5058. >From the event log from one device. All HP procurves showing the same. 2014-02-28 12:33:09 Mempool Memory pool updated: type hpGlobal, index 1, descr Global Memory 1 2014-02-28 12:33:09 Mempool Memory pool updated: type hpLocal, index 1, descr Local Memory 1 2014-02-28 06:33:10 Mempool Memory pool updated: type hpGlobal, index 1, descr Global Memory 1 2014-02-28 06:33:10 Mempool Memory pool updated: type hpLocal, index 1, descr Local Memory 1 2014-02-28 00:33:09 Mempool Memory pool updated: type hpGlobal, index 1, descr Global Memory 1 2014-02-28 00:33:09 Mempool Memory pool updated: type hpLocal, index 1, descr Local Memory 1 2014-02-27 18:33:09 Mempool Memory pool updated: type hpGlobal, index 1, descr Global Memory 1 2014-02-27 18:33:09 Mempool Memory pool updated: type hpLocal, index 1, descr Local Memory 1 2014-02-27 12:33:10 Mempool Memory pool updated: type hpGlobal, index 1, descr Global Memory 1 2014-02-27 12:33:10 Mempool Memory pool updated: type hpLocal, index 1, descr Local Memory 1 2014-02-27 06:33:09 Mempool Memory pool updated: type hpGlobal, index 1, descr Global Memory 1 2014-02-27 06:33:09 Mempool Memory pool updated: type hpLocal, index 1, descr Local Memory 1 2014-02-27 00:33:09 Mempool Memory pool updated: type hpGlobal, index 1, descr Global Memory 1 2014-02-27 00:33:09 Mempool Memory pool updated: type hpLocal, index 1, descr Local Memory 1

2 2

Vyatta snmpd errors in ports module
by Robert Williams 01 Mar '14

01 Mar '14

Hi, On the latest version of Vyatta (6.6 R1) we are getting these errors for every physical port on every poller run: snmpd[3872]: access:dot3StatsTable,interface_ioctl_dot3Stats_get, cannot get stats information for interface |eth5| snmpd[3872]: access:dot3StatsTable,interface_ioctl_dot3Stats_get, cannot get stats information for interface |eth0| snmpd[3872]: access:dot3StatsTable,interface_ioctl_dot3Stats_get, cannot get stats information for interface |eth3| snmpd[3872]: access:dot3StatsTable,interface_ioctl_dot3Stats_get, cannot get stats information for interface |eth2| snmpd[3872]: access:dot3StatsTable,interface_ioctl_dot3Stats_get, cannot get stats information for interface |eth4| snmpd[3872]: access:dot3StatsTable,interface_ioctl_dot3Stats_get, cannot get stats information for interface |eth1| However everything on the graphs looks fine. I’ve tracked it down to the ports module, which when run by itself causes the errors on the Vyatta box: (The stats are low because it’s not actually in production and only eth4 and eth4.497 are link-up) router.name 311 vyatta (unix) Uptime: 4h 23m 4s Module time: 0.0684s Hardware: Version: Features: VC6.6R1 Serial: Asset: Module time: 0.0132s Caching Oids: ifEntry ifXEntry dot3StatsDuplexStatus Port Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller(2) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts Port Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller(3) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts Port Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller(4) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts Port Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller(5) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts Port Intel Corporation 82574L Gigabit Network Connection(6) replacing with 64-bit...VLAN == bps(20.6kbps/13.8kbps)bytes(58kB/38.9kB)pkts(12.9pps/13.0pps) Checking alerts Port Intel Corporation 82574L Gigabit Network Connection(7) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts Port eth4.497(8) replacing with 64-bit...VLAN == bps(18.3kbps/13.0kbps)bytes(51.5kB/36.5kB)pkts(12.9pps/13.0pps) Checking alerts Module time: 0.3932s Polled in 0.5376 seconds Now this doesn’t occur when polling Vyatta 6.5 R1 so I appreciate it’s probably something which has changed in the Vyatta (or it is now logging something which previously it has ignored). However, to stand a hope of getting it sorted I wondered if anyone could suggest what part of the ‘ports’ module could possibly cause an error like this in the snmpd of the Vyatta? Then I can try to take it up on the Vyatta forums, but at the moment I can’t even explain which I’m trying to poll when the error occurs because I don’t know what steps in the ports module are likely to cause this. Any suggestions / pointers welcome! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

2 3

Frontpage settings
by Scott Brawner 28 Feb '14

28 Feb '14

What are all the web pieces you can put on the front page? I'd like to see what's in the /alerts/ page on the front page in the manner it's displayed on the /alerts/page. Possible? Best regards, Scott Brawner IS Manager - Infrastructure Kratos Defense and Security Solutions, Inc. o. 843-308-2364 m. 843-814-3912 Description: cid:image002.jpg@01CBD278.0CADB410 For every complex problem, there is a solution that is simple, neat, and wrong. -- H. L. Mencken

2 3

inline images
by Rob VanHooren 28 Feb '14

28 Feb '14

consider, is there a way to adjust the construction of alert messages so images can be attached rather than inline. then, add a config.php lever to toggle between inline vs. attached. takes care of those environments where netadmin has no control over the mail client. just my CAD$0.02 thanks R. Sent from my iPhone > On Feb 28, 2014, at 13:39, observium-request(a)observium.org wrote: > > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: Email alerts - supposed to have rrd images? (Scott Brawner) > 2. Re: Email alerts - supposed to have rrd images? (Tom Laermans) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 28 Feb 2014 18:19:20 +0000 > From: Scott Brawner <Scott.Brawner(a)kratosdefense.com> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Email alerts - supposed to have rrd images? > Message-ID: > <921F9F8F3697FD4BB023C0963EE7073A1E83A6FD(a)SD-MB02.wfinet.com> > Content-Type: text/plain; charset="us-ascii" > > How do we get this working for Outlook. > > > > Thanks, > Scott Brawner > Description: cid:image002.jpg@01CBD278.0CADB410 > > > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tom > Laermans > Sent: Saturday, February 15, 2014 4:22 AM > To: Observium Network Observation System > Subject: Re: [Observium] Email alerts - supposed to have rrd images? > > > > Hi, > > The image is included in the html you posted. It's an inline image, not all > e-mail clients (notably Outlook) support this format. > > Tom > > On 15/02/2014 06:48, Matt Ladewig wrote: > > All - > > > > When I receive an alert based on an alerting check, I get a box at the > bottom of the alert that looks like images are supposed to be included, but > they aren't able to resolve. Checking the email's html, there isn't a url > included with the listed images. The html is attached. Any insight would be > appreciated - > > > > Thanks, > > Matt > > > > > > > > > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > >

1 0

Email alerts - supposed to have rrd images?
by Matt Ladewig 28 Feb '14

28 Feb '14

All - When I receive an alert based on an alerting check, I get a box at the bottom of the alert that looks like images are supposed to be included, but they aren't able to resolve. Checking the email's html, there isn't a url included with the listed images. The html is attached. Any insight would be appreciated - Thanks, Matt

5 8