- observium - lists.observium.org

Viewing Mac addresses known on each device/vlan/port?
by Damien Gardner 26 Feb '14

26 Feb '14

Hi Folks, Sorry if this has been asked before, google wasn't helping much. Does Observium have the ability to tell me what MAC Addresses have been learnt on any given device, or preferably ports on a device? I was about to go write some php code to find a missing IPMI device via SNMP queries, and one of my coworkers suggested seeing if we can find it from Observium already? Thanks, Damien -- Damien Gardner Jnr Level 3 Systems Admin Office Address: 2/2 Teamster Close, Tuggerah NSW 2259 Postal Address: PO Box 3187, Tuggerah NSW 2259 Direct: | Network Ops: +61 2 8115 8850 | Main Switch: +61 2 8115 8888 Web: www.serversaustralia.com.au

1 0

Alert Checker if SNMP oid | Dell Power
by Guilherme de Freitas Figueiredo 25 Feb '14

25 Feb '14

Hi! there is some form to create some alert using a specifc SNMP oid? I say this because I'm trying to create an alert for a Dell switch in which it alarms if one of the sources of power is turned off, the SNMP oid is the SNMPv2-SMI :: enterprises.674.10895.3000.1.2.110.7.2.1.3.11 already in observium envMonSupplyState.11 is apparently the same has to be greater than 1, so I already tried the following: envMonSupplyState.11 gt 1 and SNMPv2-SMI :: enterprises.674.10895.3000.1.2.110.7.2.1.3.11 gt 1 []s! -- Guilherme de Freitas Figueiredo

3 5

Re: [Observium] Weirdness with a site with 32-bit ports
by Scott Brawner 25 Feb '14

25 Feb '14

This is happening with all my 1921 routers, all started on the 5th or 6th. Help? Thanks, Scott Brawner Description: cid:image002.jpg@01CBD278.0CADB410 From: Scott Brawner Sent: Tuesday, February 25, 2014 10:57 AM To: observium(a)observium.org Subject: Weirdness with a site with 32-bit ports I am going through the sites and I noticed that on the overview page that nothing is showing in the traffic graph for one of our sites. Best regards, Scott Brawner IS Manager - Infrastructure Kratos Defense and Security Solutions, Inc. o. 843-308-2364 m. 843-814-3912 Description: cid:image002.jpg@01CBD278.0CADB410 For every complex problem, there is a solution that is simple, neat, and wrong. -- H. L. Mencken

3 5

Weirdness with a site with 32-bit ports
by Scott Brawner 25 Feb '14

25 Feb '14

I am going through the sites and I noticed that on the overview page that nothing is showing in the traffic graph for one of our sites. But when I look at the ports themselves, they are showing traffic: Then when I go into port config, I see this: It looks like it stopped showing traffic on the 5th or 6th. Any ideas? Best regards, Scott Brawner IS Manager - Infrastructure Kratos Defense and Security Solutions, Inc. o. 843-308-2364 m. 843-814-3912 Description: cid:image002.jpg@01CBD278.0CADB410 For every complex problem, there is a solution that is simple, neat, and wrong. -- H. L. Mencken

1 0

IPMI values from server running VMWare
by Niclas Tollgård 25 Feb '14

25 Feb '14

Until recently I've been able to retrieve values using IPMI on my servers running ESXi. This option now seems to have been removed? It's still available for my servers running Linux but not ESXi. Any specific reason for this? Is it something I can turn back on again? I'm thinking it's a "hardware" thing and not dependant on the OS it's running. Regards, Nic

2 1

Mailing alert system
by tech8.otelafrica 25 Feb '14

25 Feb '14

Hey guys, Could you assist as to how we can set up alerts. I pretty much want the system to send an email when a device goes down. How would I go about setting this up? Regards Anton

4 9

New alerts
by Johnathon Voegeli 25 Feb '14

25 Feb '14

I am awful at using this new alerting system. Can someone give me a hint on how to setup a temperature alert? Just the basics and I'll work from there. -JV

2 3

Re: [Observium] LDAP Auth not able to use level 10
by Jeff Courtade 24 Feb '14

24 Feb '14

Use the hostname ui.tadj1.adjuggler.net. -- Thanks, Jeff Courtade Director of Systems Engineering Adjuggler Inc http://www.adjuggler.com M: 240.507.6116 -------- Original message -------- From: Tom Laermans <tom.laermans(a)powersource.cx> Date:02/20/2014 5:47 PM (GMT-05:00) To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] LDAP Auth not able to use level 10 Hi Rutger, The problem has been seen here on the list a few times already, but unfortunately I can't replicate it. :[ I presume access to your Observium install is out of the question? Tom On 20/02/2014 20:29, Rutger Truyers wrote: Hi, I've set up the ldap authentication with AD. The LDAP binding , Search and Authentication is all succesfull. even the group matching is perfect. But I'm not able to provide the group a level 10 authentication. When authenticating the user in the correct group can't see any device. Greetings. _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 4

Re: [Observium] Classifying port types
by Scott Brawner 24 Feb '14

24 Feb '14

As an aside, it would be awesome to be able to assign port roles via the web interface instead of depending on the snmp attribute. Thanks, Scott Brawner Description: cid:image002.jpg@01CBD278.0CADB410 From: Scott Brawner Sent: Monday, February 24, 2014 11:45 AM To: observium(a)observium.org Subject: Classifying port types I still can't get the classified port types (transit/peering/customer) to work properly. The main graph on the home page works but when I click the link, I get Total Graph for ports of type : Transit None found. Same with Peering. I have the text 'transit' and/or 'peering' in the description for the ports. It appears to be sort of working. just would like that drill down to work. Best regards, Scott Brawner IS Manager - Infrastructure Kratos Defense and Security Solutions, Inc. o. 843-308-2364 m. 843-814-3912 Description: cid:image002.jpg@01CBD278.0CADB410 For every complex problem, there is a solution that is simple, neat, and wrong. -- H. L. Mencken

2 2

Classifying port types
by Scott Brawner 24 Feb '14

24 Feb '14

I still can't get the classified port types (transit/peering/customer) to work properly. The main graph on the home page works but when I click the link, I get Total Graph for ports of type : Transit None found. Same with Peering. I have the text 'transit' and/or 'peering' in the description for the ports. It appears to be sort of working. just would like that drill down to work. Best regards, Scott Brawner IS Manager - Infrastructure Kratos Defense and Security Solutions, Inc. o. 843-308-2364 m. 843-814-3912 Description: cid:image002.jpg@01CBD278.0CADB410 For every complex problem, there is a solution that is simple, neat, and wrong. -- H. L. Mencken

1 0