- observium - lists.observium.org

power levels for Juniper MX
by Richard Savage 04 Aug '16

04 Aug '16

Hi Looks like there might be a slight issue with the reporting of power levels for SFP's in Juniper MX's. Seeing the following: on the Juniper MX: Laser rx power high alarm threshold : 2.0000 mW / 3.01 dBm Laser rx power low alarm threshold : 0.0000 mW / - Inf dBm Laser rx power high warning threshold : 0.7900 mW / -1.02 dBm Laser rx power low warning threshold : 0.0315 mW / -15.02 dBm But looks like observium is treating '-Inf' as '0' and this throwing an alert. (see attached) [cid:image001.png@01D1EC12.14D27B80] Might need to change how observium interprets Infinite values? Thanks Rich This e-mail is sent on behalf of Timico Partner Services Limited, a company registered in England and Wales, registered number 03128506, registered office Beacon Hill Park, Newark, Nottinghamshire, NG24 2TN and regulated by Ofcom. The information in this e-mail is confidential and is intended solely for the use of that individual or entity to which it is addressed. Unauthorised use, dissemination, distribution, publication or copying of this communication is strictly prohibited. If you receive this in error, please notify us by email to privacy(a)timico.co.uk<mailto:privacy@timico.co.uk> and delete any copies. For information about how we process data and monitor communications please see our privacy statement<http://www.timico.co.uk/downloads/terms/Privacy_Statement.pdf>.

3 3

Help in New QoS support
by obm＠obm.cl 04 Aug '16

04 Aug '16

Hi, years ago I collaborated with huawei's integration and its MIBs files. It was before change to a commercial edition Now I've been working on Huawei's CBQoS support, but I have a few questions about. Already I've written for Huawei NE40 family a discovery and polling modules, using the mysql table called ports_cbqos. I found that every vendor has different implementations, even one vendor has different implementations for each their models. My questions: 1.- Could I create a new table or just modify the ports_cbqos table. 2.- Right now I have finished this URL and it's working fine: http://10.184.8.136/device/device=1/tab=port/port=8/view=hqos/ (a new VIEW called hqos and I know you can't reach it but I can create a public address) I do not know how to integrate it into the navigation panels or port links (How to chose between cisco's qos or huawei's qos when somebody follow the cbqos link) I think we need to create a new QoS module with multi-vendor support. (modify the database schema) Thanks, Oscar

2 1

Alerting on Application attributes
by Neil French 04 Aug '16

04 Aug '16

Hi, Apologies if this has been covered previously, I can’t seem to browse any mailing list archives as the link is dead. I have previously used custom OIDs to monitor a VoIP Application (FreeSWITCH) but found I couldn’t alert on custom OIDs, and that the graphing wasn’t as customisable as I wanted, so I have built a custom application for freeswitch. I now want to be able to raise alerts on a few things, such as when the number of new sessions per second is over a predefined value or when the uptime resets (application pop and restart). I can’t seem to find a way of creating an alert check for anything that’s not one of the basic properties of a device though. Could someone please tell me if this is possible? For example can I create my own attributes in the device then query them with an alert check? I have tried adding something like: $device[‘device_state’].[’my parameter’] = value But that doesn’t seem to be stored outside of the php script. It’s quite important that we are able to alert on custom parameters and I can either provide these as OIDs or through the unix agent, whichever gets the job done. Thanks, Neil.

2 1

SNMP Changes and rediscovery
by Derek 04 Aug '16

04 Aug '16

I've recently switched several devices off of SNMP v2c to v3, and I've updated my config.php with all the v3 parameters, and I'm wondering if there's a way for force a re-discovery using the new info without having to go into each individual device and enter in all the new SNMP information? I didn't see any flags in for discovery.php that would force it.

3 5

db.log
by Charlie Bell 03 Aug '16

03 Aug '16

Hi, I've had a small Observium (c. 5500 ports) running for a couple of years (SVN version). Have configured housekeeping, which is fab and has kept things from getting out of hand. However, noticed /opt/observium/logs/db.log is a 5.6GB file... Can I clean this up? Should I be running a cron cleanup task on this? Thanks Charlie Bell ________________________________ [Maddocks Web Site]<http://www.maddocks.com.au> Maddocks is an Employer of Choice for Equality | WGEA 2004-2015 Recommended | Asia Pacific Legal 500<http://www.legal500.com/firms/32094/32422> | Chambers Asia<http://www.chambersandpartners.com/asia/Firms/144628-96471> | Best Lawyers<http://www.bestlawyers.com/Search/Default.aspx?country=AU&firm_name=Maddocks> Canberra - Tel: (61 2) 6120 4800 Fax: (61 2) 6230 1479 Melbourne - Tel: (61 3) 9258 3555 Fax: (61 3) 9258 3666 Sydney - Tel: (61 2) 9291 6100 Fax: (61 2) 9221 0872 Follow us on Twitter<http://twitter.com/#!/MaddocksLawyers> LinkedIn<http://www.linkedin.com/company/16131> Please consider the environment before printing this email. ________________________________ The information in this electronic mail is privileged and confidential, intended only for use of the individual or entity named. If you are not the intended recipient, any dissemination, copying or use of the information is strictly prohibited. If you have received this transmission in error please delete it immediately from your system and inform us by email on info(a)maddocks.com.au<mailto:info@maddocks.com.au> ________________________________

1 1

False Alert (snmp)
by Laurence Mayer 02 Aug '16

02 Aug '16

Hello, Today for no known reason we received the below alert in the "Recent Events" (and via email), everything on the switch appears to have been ok and could not find any issue that should have caused this alert. 6h 36m 15scisco10g1 cisco10g1 Device status changed to Up 6h 36m 16scisco10g1 cisco10g1 Device status changed to Down (snmp) Is there a timeout that may have caused this that i can increase to avoid false/positives? Thanks Laurence

2 2

Ports Shown As Down
by Laurence Mayer 01 Aug '16

01 Aug '16

Hi, After a power outage, the front page (and Status Warnings and Notifications) is showing a Cisco device's Ports as Down, of all ports that have NO devices (workstations) connected. The alert I have defined (taken from the example) Port is enabled, but operationally down ifAdminStatus equals up ifOperStatus notequals up * ifType equals ethernetCsmacd I have run the poller.php multiple times with no success. Is there a default amount of time until these warnings will be cleared, is there a process that can be run to clear these alerts? Thanks Laurence

2 6

Email Alerts Not Working
by Laurence Mayer 01 Aug '16

01 Aug '16

Hi, I have recently installed Observium and updated to the stable version. I have successfully configured a number of alerts, however despite the alerts being generated (I see them via the web gui) I do not receive them to email. Using test_alert.php -a 1 (see below) I am able to receive email, however the test email looks a little empty from what I would expect. I receive the following error, see below for the debug. *ERROR[Error in query: (Incorrect table name '') 1103]* Any guidance will be appreciated. Thanks Laurence ------------------------------------------------------------------------------------------- ALERT Modify <http://observiumsrv.istraresearch.com/device/tab=alert/> *Alert* *Entity* *Metrics* *Duration* Unknown Device *Device* <http://observiumsrv.istraresearch.com/device/> *Hardware* *Operating System* *Location* *Uptime* Never polled E-mail sent to: laurence@ <laurence(a)istraresearch.com>mydomain.com E-mail sent at: Sun, 31 Jul 2016 16:33:53 +0300 ./test_alert.php -a 1 Observium 0.16.7.8003 Test Alert Notification ##### Software versions ##### o OS Linux 3.5.0-23-generic [amd64] (Ubuntu 12.04) o Apache 2.2.22 o PHP 5.3.10-1ubuntu3.23 o Python 2.7.3 o MySQL 5.5.46-0ubuntu0.12.04.2 (extension: mysqli 5.5.46) o SNMP NET-SNMP 5.4.3 o RRDtool 1.4.7 ##### MySQL mode ##### o MySQL ##### Charset info ##### o PHP UTF-8 o MySQL utf8 ##### Timezones info ##### o Date Sunday, 31-Jul-16 16:33:53 IDT o PHP +03:00 o MySQL +03:00 o Notifying [email] : {"email":"laurence(a)mydomain.com"} root@observiumsrv:/opt/observium# ./test_alert.php -a 1 -d DEBUG! SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema';] SQL RUNTIME[0.00009990s] SQL[SELECT @@SESSION.sql_mode;] SQL RUNTIME[0.00012803s] SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'current_rev';] SQL RUNTIME[0.00007296s] SQL[SELECT * FROM `config`] SQL RUNTIME[0.00008488s] CMD[/bin/hostname -f] CMD EXITCODE[0] CMD RUNTIME[0.0017s] STDOUT[ observiumsrv.mydomain.com ] Observium 0.16.7.8003 Test Alert Notification CMD[/opt/observium/scripts/distro] CMD EXITCODE[0] CMD RUNTIME[0.038s] STDOUT[ Linux|3.5.0-23-generic|amd64|Ubuntu|12.04 ] CMD[/usr/bin/env python --version 2>&1] CMD EXITCODE[0] CMD RUNTIME[0.0025s] STDOUT[ Python 2.7.3 ] SQL[SELECT version();] SQL RUNTIME[0.00017810s] CMD[/usr/bin/snmpget --version 2>&1] CMD EXITCODE[0] CMD RUNTIME[0.002s] STDOUT[ NET-SNMP version: 5.4.3 ] CMD[/usr/bin/rrdtool --version |head -n1] CMD EXITCODE[0] CMD RUNTIME[0.0036s] STDOUT[ RRDtool 1.4.7 Copyright 1997-2012 by Tobias Oetiker <tobi(a)oetiker.ch> ] CMD[date "+%:z"] CMD EXITCODE[0] CMD RUNTIME[0.0016s] STDOUT[ +03:00 ] SQL[SELECT TIMEDIFF(NOW(), UTC_TIMESTAMP);] SQL RUNTIME[0.00012493s] CMD[/usr/bin/env apache2 -v | awk '/Server version:/ {print $3}'] CMD EXITCODE[0] CMD RUNTIME[0.0132s] STDOUT[ Apache/2.2.22 ] SQL[SELECT @@SESSION.sql_mode;] SQL RUNTIME[0.00013804s] SQL[SHOW VARIABLES LIKE 'character_set_connection'] SQL RUNTIME[0.00036120s] ##### Software versions ##### o OS Linux 3.5.0-23-generic [amd64] (Ubuntu 12.04) o Apache 2.2.22 o PHP 5.3.10-1ubuntu3.23 o Python 2.7.3 o MySQL 5.5.46-0ubuntu0.12.04.2 (extension: mysqli 5.5.46) o SNMP NET-SNMP 5.4.3 o RRDtool 1.4.7 ##### MySQL mode ##### o MySQL ##### Charset info ##### o PHP UTF-8 o MySQL utf8 ##### Timezones info ##### o Date Sunday, 31-Jul-16 16:34:23 IDT o PHP +03:00 o MySQL +03:00 SQL[SELECT * FROM `alert_tests` WHERE 1] SQL RUNTIME[0.00008202s] Cached 12 alert rules. SQL[SELECT * FROM `alert_assoc`] SQL RUNTIME[0.00006294s] SQL[SELECT * FROM `alert_table` WHERE `alert_table_id` = '1'] SQL RUNTIME[0.00006318s] SQL[SELECT * FROM `devices` WHERE `device_id` = ''] SQL RUNTIME[0.00007415s] SQL[SELECT * FROM `` WHERE ``.`` = ''] SQL RUNTIME[0.00006485s] *ERROR[Error in query: (Incorrect table name '') 1103]* SQL[SELECT * FROM `devices` WHERE `device_id` = ''] SQL RUNTIME[0.00009012s] SQL[SELECT * FROM `alert_contacts` WHERE `contact_disabled` = 0 AND `contact_id` IN (SELECT `contact_id` FROM `alert_contacts_assoc` WHERE `aca_type` = 'alert' AND `alert_checker_id` = '');] SQL RUNTIME[0.00006199s] o Notifying [email] : {"email":"laurence(a)mydomain.com"} SQL[UPDATE `alert_log` set `notified` ='1' WHERE `event_id` = ''] SQL RUNTIME[0.00025702s]

4 14

Observium poller/discovery module descriptions
by Andrew.Jones＠kiewit.com 01 Aug '16

01 Aug '16

I have searched your webpage and FAQ and can't seem to find answer to my question: Do you guys have a list handy describing what each of the poller and discovery modules do exactly? $config['poller_modules']['system'] = 1; $config['discovery_modules']['os'] = 1; I am working on a new deployment of Observium and am trying to optimize it and configure some custom requirements and it would be helpful having some additional information regarding each module. Thank you!

1 0

unix agent / squid app
by Daniel Horth 01 Aug '16

01 Aug '16

Howdy again. I am looking to add some graphs for squid performance metrics - wondering if there has been any work done on this to get me started or do I need to roll my own? Thanks

3 2