- observium - lists.observium.org

Getting different results for same interface in original port and the billing port sections
by Arya, Renuka [MED] 22 Jul '16

22 Jul '16

Hi there, I am seeing different throughput results for the same port at two different section of the Observium GUI: The Port summary shows that the the throughput we were getting between 08 Jul to 18 Jul was almost ~ 8 Gbps (in each direction. However, the bill says it was ~ 6 Gbps between that period. Not sure, which one is reporting it correctly. I would expect both of them to match exactly. Thanks! Regards Renuka ******************************************************************************** This e-mail is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged and confidential. If the reader of this e-mail message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is prohibited. If you have received this e-mail in error, please notify the sender and destroy all copies of the transmittal. Thank you University of Chicago Medicine and Biological Sciences ********************************************************************************

2 1

Re: [Observium] Frequent drop outs from WebUI
by Roland Schwingel 22 Jul '16

22 Jul '16

Hi... No idea where my problem (see below) could come from? Thanks for your help, Roland "observium" <observium-bounces(a)observium.org> wrote on 20.07.2016 10:20:10: > From: Roland Schwingel <roland.schwingel(a)onevision.com> > To: observium(a)observium.org > Date: 20.07.2016 10:22 > Subject: [Observium] Frequent drop outs from WebUI > Sent by: "observium" <observium-bounces(a)observium.org> > > Hi... > > I am running Observium for quite a while now. But there is one thing > that bugs me. I first thought this is a bug and would be fixed at some > time but I am updating Observium frequently from svn yet with no change. > > I am frequently dropped out of Observium with an authentication error. > I log in (with LDAP authbackend) just fine. But sometimes after 30 > minutes, sometimes even after a few seconds I am dropped out of > Observium. When I click the "Remember me" (Cookie) button this lasts > a little longer. Sometimes I am immediately kicked directly after > logging in. This is also logged in Observiums "Authentication log" > as "Authentication Failure" in the very same second as the "Logged in" > event occured. > > Is anything known about this? Or is it just a nifty PHP config variable > about session handling I forgot to set? > > Thanks for your help, > > Roland > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Traffic accounting Spike Removal
by Cameron Murray 22 Jul '16

22 Jul '16

Morning All, We've been trying to remove the spike from a Traffic accounting graph with no success. We have sun through the pl and php scripts however the spike remains: [cid:image001.png@01D1E408.BAC99760] None of the interfaces this accounts for show the spike. Regards, Cameron Murray Senior Communications Manager How am I doing? Please click here<http://www.techpath.com.au/contact-us/feedback/> to rate my work. [cid:image002.png@01D1E408.BAC99760] P 1300 033 300 F 07 3809 3999 E cameron(a)techpath.com.au<mailto:cameron@techpath.com.au> www.techpath.com.au<http://www.techpath.com.au> Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 [cid:image003.png@01D1E408.BAC99760] [cid:image004.png@01D1E408.BAC99760] [cid:image005.png@01D1E408.BAC99760] Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd.

1 0

Alert checker sending email notifications every polling round
by Daniel Horth 21 Jul '16

21 Jul '16

Hi all I have an odd alerting issue where I am receiving email alerts about a failed check each time a polling interval passes. Checking the alert_table for the device_id in question I see that it has_alerted = 1 and everything else appears to be in order. Wondering why I am getting repeated alerts, pretty sure with my other alerts I have configured I only get one when the alert triggers and another if the ‘send recovery information” option is checked. Any advice on how to troubleshoot this would be appreciated. I have tried disassociating my email address from the alert and also rebuilt alerts. Thanks

6 18

Google map not showing devices after fresh install of Subscription Version
by Dano, Leo 21 Jul '16

21 Jul '16

Finally got everything to work, well at least I thought. Ldap, alerts, etc are all good now. Except I just get a blue map with no host locations. I made sure to put my location in each host properties. Any thoughts? Thanks, ----------------------- Leo Dano

3 7

Call to undefined function check_valid_sensors() on IPMI & Unix-agent polling
by Oliver Baker 21 Jul '16

21 Jul '16

Hi there, When polling with either IPMI or unix-agent modules enabled, the polling run stops with this error: Sensors: PHP Fatal error: Call to undefined function check_valid_sensors() in /opt/observium/includes/polling/unix-agent.inc.php on line 174 I've updated to the latest non-stable release, and no change. I've also historically had this issue and cleared my /opt/observium directory and re-installed but no change. Any ideas? Happy to provide more info if needed. Many thanks Olly

1 0

Adding users for alerts?
by Dano, Leo 21 Jul '16

21 Jul '16

Hello all, Is there any way to add multiple users to receive the alerts? Right now, in the config.php it sends all alerts to myself. Is there a way to add users via the webpage? I am using ldap auth. Thanks, ----------------------- Leo Dano

3 26

NetApp c-DOT updates
by Jesper Frank Nemholt 21 Jul '16

21 Jul '16

Hi! I just updated to 7961 and saw that NetApp c-Dot is now reporting volumes like it has done for long on OnTAP 7. Great :-) However, the total and used capacity are all 0, so something with the Index is wrong or simply not done yet. Anyone knows if this is a known issue and being worked on, or ? /Jesper

2 2

Re: [Observium] Steps to add custom oid
by Moerman, Maarten 20 Jul '16

20 Jul '16

Hi Steve, What do you mean, not getting any data? You said the graphs show up fine? Care to share a screenshot? Also copying the mibs doesn’t work, as this is custom OIDs, the whole meaning behind it, is that you don’t need the MIBs for that. Maarten Moerman From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of "Kramling, Steven" <Steve.Kramling(a)Sensus.com<mailto:Steve.Kramling@Sensus.com>> Reply-To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Date: Wednesday, July 20, 2016 at 5:18 PM To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Subject: [Observium] Steps to add custom oid Hi, I could use some guidance here. I have recently upgraded to the subscription version of Observium so that I could add some custom oids to graph. I am running on CentOS 7. I followed the guide here: http://www.maartenmoerman.nl/?p=649 No problem adding the oids and applying them to the devices. Graphs show up fine but I cannot get any data. I have also copied the MIBs to the /opt/observium/mibs directory. The MIBs have a *.txt extension on them. I have tried removing this but still no luck. Any help would be appreciated. Cheers, Steve

3 5

Steps to add custom oid
by Kramling, Steven 20 Jul '16

20 Jul '16

Hi, I could use some guidance here. I have recently upgraded to the subscription version of Observium so that I could add some custom oids to graph. I am running on CentOS 7. I followed the guide here: http://www.maartenmoerman.nl/?p=649 No problem adding the oids and applying them to the devices. Graphs show up fine but I cannot get any data. I have also copied the MIBs to the /opt/observium/mibs directory. The MIBs have a *.txt extension on them. I have tried removing this but still no luck. Any help would be appreciated. Cheers, Steve

3 2