- observium - lists.observium.org

Show port descriptions also on Ports -> Map view
by Thomas Stather 10 Oct '22

10 Oct '22

Hi We are running Observium Professional r12071 I noticed that if we set up a description for our network ports, these are shown on the views of the switch under Ports -> Basic Ports -> Details Ports -> Neighbours Is there a way to also show it on *Ports -> Map* for the local port (blue bubble) and the remote port (grey bubble)? Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Room: U1.509 Tel: +49 6221 486 628 Fax: +49 6221 486 561 Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an!

1 0

Weird results from stacked graph.
by David Milton 08 Oct '22

08 Oct '22

Hello, We have been seeing some results in our stacked graphs that do not appear to make sense. Initially we thought this was because the maximum values for the two values occurred at different points in time. That cannot be the whole issue because even if you take the sum of every pair of numbers the maximum aggregate must at least equal the maximum value of one of the two series. This graph shows the problem: How can we have a maximum value of 97.4M but an aggregate maximum of 55.7M? It seems that maximum aggregate should also at least be 97.4M. What’s happening here? Thanks, Dave.

2 4

Alerter frequency
by Alex Rubenstein 05 Oct '22

05 Oct '22

Greetings, I have been setting up Observium for a client for the last few months and I have been loving it. Amazingly flexible and reliable. I am quite pleased. I am running 22.8.12241, Subscription. I know that Observium does not support SNMP Traps and understand why. So, I have set up syslog on the services to push events and they are caught by Observium. This works fine. I have now also created syslog alerts and this works fine too. My issue is the delay from when the syslog comes to the server, and the alert goes out. I found this old mailing list entry: https://lists.observium.org/hyperkitty/list/observium@lists.observium.org/m… Adam's reply was: "We have to wait for a cron job to be run to send the alerts, because we can't do it in the syslog processing script. Iirc you can cron alerter.php to do it more frequently!" This is an acceptable solution to me, but I have a couple question: 1. Is there risk with how often this is run? If I cron'ed this for every minute, is there a risk of some sort of collision with the 5 minute poller? 1. Is it possible, as a feature request, to call alerter.php -h from syslog.php when an entry comes in? While I think Observium is an excellent piece of software, I wish it had just a little more ability to handle real-time alerts coming in. There are many situations that occur where an outage or event could be substantially shorter than the poller interval (like, a short UPS power loss), and I would like to have a little better quasi-real time alerting of these events. Thanks for you consideration.

2 1

Temperature sensor question
by Kleber Cristiano Santilli Coelho 01 Oct '22

01 Oct '22

Good Morning! I hope you're all well. I apologize if the question is inappropriate. I'm developing an IOT module and I use the "ENTITY" MIB for the sensors. I saw that Observium handles this MIB automatically, using the entPhySensorType OID to distinguish the sensor types and it works great, except for the temperature sensor, entPhySensorType value 8. I would like to understand if this has any special reason to adapt my code. Thank you, congratulations on the software. -- Kleber Coelho Campus Fernando Costa Universidade de São Paulo (19) 3565-4321

3 10

APC's universal I/O (UPS temp/humidity sensors) not showing in
by Steve Costaras 26 Sep '22

26 Sep '22

Have observium polling various APC ups's (AP9631 NMC cards). Observium correctly polls the battery temperatures, but when adding in probes to the universal I/O ports on the AP9631 (just trying with the temp sensor currently) I do not see the data being plotted on observium. Is this supposed to work? I don't have the humidity sensor currently (was trying to test with the temp sensor first before buying the temp/humidity combined sensors for the units). Would really like to get this data tracked for environmental data logging per rack (have a ups per rack). The data does show up in an snmpwalk: # snmpbulkwalk -v2c -c xxx yy.yy.yy.yy .1.3.6.1.4.1.318.1.1.25.1 iso.3.6.1.4.1.318.1.1.25.1.1.0 = INTEGER: 2 iso.3.6.1.4.1.318.1.1.25.1.2.1.1.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.2.1.1.2.1 = INTEGER: 2 iso.3.6.1.4.1.318.1.1.25.1.2.1.2.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.2.1.2.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.2.1.3.1.1 = STRING: "Port 1 Temp 1" iso.3.6.1.4.1.318.1.1.25.1.2.1.3.2.1 = STRING: "Port 2 Temp 2" iso.3.6.1.4.1.318.1.1.25.1.2.1.4.1.1 = STRING: "Port 1" iso.3.6.1.4.1.318.1.1.25.1.2.1.4.2.1 = STRING: "Port 2" iso.3.6.1.4.1.318.1.1.25.1.2.1.5.1.1 = INTEGER: 75 iso.3.6.1.4.1.318.1.1.25.1.2.1.5.2.1 = INTEGER: 90 iso.3.6.1.4.1.318.1.1.25.1.2.1.6.1.1 = INTEGER: 24 (Port 1 temp 1 sensor in C) iso.3.6.1.4.1.318.1.1.25.1.2.1.6.2.1 = INTEGER: 32 (port 2 temp 2 sensor in C) iso.3.6.1.4.1.318.1.1.25.1.2.1.7.1.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.2.1.7.2.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.2.1.8.1.1 = INTEGER: 0 iso.3.6.1.4.1.318.1.1.25.1.2.1.8.2.1 = INTEGER: 0 iso.3.6.1.4.1.318.1.1.25.1.2.1.9.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.2.1.9.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.2.1.10.1.1 = INTEGER: 2 iso.3.6.1.4.1.318.1.1.25.1.2.1.10.2.1 = INTEGER: 2 iso.3.6.1.4.1.318.1.1.25.1.3.0 = INTEGER: 2 iso.3.6.1.4.1.318.1.1.25.1.4.1.1.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.1.2.1 = INTEGER: 2 iso.3.6.1.4.1.318.1.1.25.1.4.1.2.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.2.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.3.1.1 = STRING: "Port 1 Temp 1" iso.3.6.1.4.1.318.1.1.25.1.4.1.3.2.1 = STRING: "Port 2 Temp 2" iso.3.6.1.4.1.318.1.1.25.1.4.1.4.1.1 = STRING: "Port 1" iso.3.6.1.4.1.318.1.1.25.1.4.1.4.2.1 = STRING: "Port 2" iso.3.6.1.4.1.318.1.1.25.1.4.1.5.1.1 = INTEGER: 0 iso.3.6.1.4.1.318.1.1.25.1.4.1.5.2.1 = INTEGER: 0 iso.3.6.1.4.1.318.1.1.25.1.4.1.6.1.1 = INTEGER: 10 iso.3.6.1.4.1.318.1.1.25.1.4.1.6.2.1 = INTEGER: 10 iso.3.6.1.4.1.318.1.1.25.1.4.1.7.1.1 = INTEGER: 40 iso.3.6.1.4.1.318.1.1.25.1.4.1.7.2.1 = INTEGER: 40 iso.3.6.1.4.1.318.1.1.25.1.4.1.8.1.1 = INTEGER: 60 iso.3.6.1.4.1.318.1.1.25.1.4.1.8.2.1 = INTEGER: 60 iso.3.6.1.4.1.318.1.1.25.1.4.1.9.1.1 = INTEGER: 0 iso.3.6.1.4.1.318.1.1.25.1.4.1.9.2.1 = INTEGER: 0 iso.3.6.1.4.1.318.1.1.25.1.4.1.10.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.10.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.11.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.11.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.12.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.12.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.13.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.13.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.14.1.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.14.2.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.15.1.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.15.2.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.16.1.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.16.2.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.17.1.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.17.2.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.18.1.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.18.2.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.19.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.19.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.20.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.20.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.21.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.21.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.22.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.22.2.1 = INTEGER: 1

3 4

HP A7510 JD238B and FDB count
by Kleber Cristiano Santilli Coelho 20 Sep '22

20 Sep '22

Hello everyone, everything good? I have an HP A7510 JD238B core switch that is not generating the FDB count graph in the observium. Does anyone have any tips for it to work? In the graphs section, the fdb_count graph does not appear. Thanks, -- Kleber Coelho Campus Fernando Costa Universidade de São Paulo (19) 3565-4321

1 0

Distro version changing continuously
by Simone Montagnani 19 Sep '22

19 Sep '22

Hi all, I'm writing because after the latest update I'm noticing that a lot of my servers Linux , specifically CentOS servers, are umping in the event log from CentOS to Redhat and viceversa. Is there something I can do to avoid this ? Simone

2 2

Huawei 6851 CPU Monitoring
by Farshid Abediny 15 Sep '22

15 Sep '22

Hello, My observium can not monitor Huawei 6851 CPU usages, is there any special settings for this? Thank you.

1 0

Huawei 6851
by Farshid Abediny 13 Sep '22

13 Sep '22

Hello, We have a pair of huawei 6851 but observium can not monitor the interface vlan traffics, What is the problem and how can we solve this problem? Thanks.

2 2

upgrading older versions
by Helmut Fritz 12 Sep '22

12 Sep '22

Hello, We have an instance of Observium running on Ubuntu 16.04. I would like to bring this OS somewhat current, say to 20.04 or maybe even 22.04. At the same time, our Observium version on this is 20.1.10233. Would there be an issue upgrading the OS with the current version of Observium running on them? I know a fresh install would be best, but then what is the migration procedure? Are all alerts and configurations moved in the migration (I would assume so, but want to understand this as it is a lot of work to recreate all of this). Is there an issue going in one jump from 20.1.10233 to latest, or should this be done in stages? Should Observium or the OS be dealt with first (concerned about php/mysql versions matching Observium versions, etc)? We are a Pro subscriber if it matters. Thx!

2 4