- observium - lists.observium.org

Changing some devices to only poll every 10 or 15 minutes temporariliy?
by Damien Gardner 12 Apr '21

12 Apr '21

Hi all, I have a bit of an oddball one, hoping it's not horrible to be able to do... We have a few devices which have recently started taking > 5 mins to complete polling. This is leaving large gaps in our logs, and is also effecting discovery (as the polling of the devices are piling up on top of themselves and pushing load on those devices up heavily). For now I've just turned off polling on those devices, but that's not ideal either.. Is there a way to be able to just poll those manually at say 10 or 15 minute intervals? I shoved them into a group and excluded that group from our polls - and then ran poller.php -h deviceid on one device in cron every 15 mins to see how it would go - but we just get no graphs.. Also as a test, tried using rrdtool tune --step 900 to change the step size to 15 mins, but also no go (didn't really entirely expect it to..) Is there a not-horrible (or if it has to be, I'm ok with horrible in the short-term until the vendor can figure out what on earth is going on..) way to get these being polled on a 15-minute interval and also going into rrd's? (We're on the current paid subscription version, if that helps) Thanks, Damien [https://info.serversaustralia.com.au/hubfs/Brand-2018/logo-font-sau.gif] Damien Gardner Jnr Senior Dev Ops P: (02) 8115 8812 4 Amy Close, Wyong, NSW 2259 Need assistance? We are here 24/7 +61 2 8115 8888 [Sent from Front]

5 7

Unable to delete alert checkers
by Luis Londoño 26 Mar '21

26 Mar '21

Cant delete an alert checker. When I click on Delete the confirmation prompt comes up and the checkbox is already selected but the delete alert is disabled. Unchecking the box enabled the button but clicking it doesn't delete the alert. We are on 21.3.11160 (24th March 2021) [cid:image001.png@01D7216C.5095D420] Did find in the HTML to enable the button when the checkbox is pressed was to remove the "disabled=1" [cid:image002.png@01D7216C.8C292410]

4 4

[PATCH] Support kamcmd and kamctl in kamailio local script
by Kevin Riahi 19 Mar '21

19 Mar '21

Adam, What is the outlook on deploying this patch? https://jira.observium.org/browse/OBS-3431 Thank you Kevin Riahi

1 0

Fix for small issue in poller-wrapper.py
by Damien Gardner 16 Mar '21

16 Mar '21

Hi Team, Been pulling my hair out for a large chunk of the day trying to sort out why our Huawei devices stopped polling after I split out polling run into two lots (one excluding the huawei devices group, one including it) Seems that when you enable debug with poller-wrapper.py<http://poller-wrapper.py/> (-d), it's passing a string to substring.check_call rather than a file, so it throws an exception and doesn't run the poller. The diff below is an example that seems to fix this issue (though I'm a php dev, not python, so someone who knows python might have a nicer way to do it..) root@observium:/opt/observium# svn diff poller-wrapper.py<http://poller-wrapper.py> Index: poller-wrapper.py<http://poller-wrapper.py> =================================================================== --- poller-wrapper.py<http://poller-wrapper.py> (revision 11124) +++ poller-wrapper.py<http://poller-wrapper.py> (working copy) @@ -837,7 +837,7 @@ command_args.extend(command_list) command_args.append(device_id) if debug: - command_out = temp_path + '/observium_' + process + '_' + str(device_id) + '.debug' + command_out = open(temp_path + '/observium_' + process + '_' + str(device_id) + '.debug', 'w') #print(command_args) #debug subprocess.check_call(map(str, command_args), stdout=command_out, stderr=subprocess.STDOUT) (This doesn't fix the group being polled but nothing appearing in the DB or RRDs, but I'm still trying to figure out what's going on there, I'm sure it's something borked in our DB or something..) Thanks, DG [https://info.serversaustralia.com.au/hubfs/Brand-2018/logo-font-sau.gif] Damien Gardner Jnr Senior Dev Ops P: (02) 8115 8812 4 Amy Close, Wyong, NSW 2259 Need assistance? We are here 24/7 +61 2 8115 8888 [Sent from Front]

2 1

Limiting eventlog collection
by Michael Kelly 15 Mar '21

15 Mar '21

Hi, is there any way I can fine tune the collection of Informational/Debugging events? We have rather a lot of them. mysql> select count(*) from eventlog where severity in (6,7) and timestamp > '2021-03'; +----------+ | count(*) | +----------+ | 18500339 | +----------+ 1 row in set, 2 warnings (35.82 sec) Regards, Michael.

2 2

No graphs for 64bit network ports on arm
by Simon Smith 08 Mar '21

08 Mar '21

Hi All, Ive spotted a few weird issue with my new setup running on arm? 1. The first 4 ports on our TPLink switches are being detected as 64Bit and then the rest of the ports are 32Bit ? 2. the 64bit graphs are showing 0 for everything, even though the output from the command line shows stats? (See https://pastebin.com/raw/qP4T1Fa9 <https://pastebin.com/raw/qP4T1Fa9>) 3. The graphs are being generated so the RRDs are fine, but the graphs are blank? Regards Simon

2 10

Merge rrds
by Simon Smith 08 Mar '21

08 Mar '21

Hi All, Im just wondering how to merge two rrds together? I have moved our hosting from locally to aws I decided to start a fresh rather than coping the DB and RRDs over (personal reasons) So the id numbers of hosts are different, including dns etc I would like to preserve the rrd graphs if thats possible from the old install Regards Simon - Hestor Ltd

2 2

Problem with the update
by Mario Pascal Necker 06 Mar '21

06 Mar '21

Hello I become this error Message from the update. [cid:image001.png@01D7127F.C5982CB0] Thx mario -- ✓ Geprüft von IKARUS anti.virus http://www.ikarussecurity.com

1 0

what version of php and maria can I use?
by Tony Guadagno 06 Mar '21

06 Mar '21

Hi, I did look at the recommendations and it says 7.2+ so, can I use 7.4? what about 8? Same question for maria, looks like you like 10.3, can I use more current versions? Thanks Tony

3 2

Re: [Observium] what version of php and maria can I use?
by Tony Guadagno 05 Mar '21

05 Mar '21

Ok, great, what about Maria, is there an upper limit? On Mar 5, 2021 2:33 PM, "Joelly, Alexander via observium" <observium(a)observium.org> wrote: Observium on PHP 7.4 works fine - PHP 8 is not supported yet. From: observium <observium-bounces(a)observium.org> On Behalf Of Tony Guadagno via observium Sent: Friday, 5 March 2021 19:50 To: Adam Armstrong via observium <observium(a)observium.org> Cc: Tony Guadagno <tonyg(a)guadagno.org> Subject: [Observium] what version of php and maria can I use? WARNING: This e-mail originated from outside of Magna. Be cautious with links and attachments. ________________________________ Hi, I did look at the recommendations and it says 7.2+ so, can I use 7.4? what about 8? Same question for maria, looks like you like 10.3, can I use more current versions? Thanks Tony

1 0