- observium - lists.observium.org

Mounted storage not seen
by Luca Sasdelli 01 Mar '18

01 Mar '18

Hi, one of our servers has an external network storage, mounted as /mnt/sb1. Here the df printout: Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda3 1905166276 1441999032 366367400 80% / udev 10240 0 10240 0% /dev tmpfs 6548756 687344 5861412 11% /run tmpfs 16371888 0 16371888 0% /dev/shm tmpfs 5120 0 5120 0% /run/lock tmpfs 16371888 0 16371888 0% /sys/fs/cgroup /dev/sda2 499656 56712 416732 12% /boot //u162796.your-storagebox.de/backup 10485760000 3640645235 6845114765 35% /mnt/sb1 tmpfs 3274380 0 3274380 0% /run/user/0 The poller.php can't find the mounted storage instead: ##### Starting polling run at 2018-03-01 10:24:27 ##### ##### xxxxxxxxxx [61] ##### o OS linux o OS Group unix o Last poll duration 0.57 seconds o Last Polled 2018-03-01 10:23:21 o SNMP Version v2c o Device status Device is reachable by PING (3.13ms) and SNMP (13.49ms) o Modules Enabled system, os, storage ##### Module Start: system ##### o SNMPv2-MIB o Uptime 213 days, 40m 39s o Last reboot 2017-07-31 10:44:06 o sysObjectID .1.3.6.1.4.1.8072.3.2.10 o snmpEngineID 80001F88805E3A691D7D1EF25800000000 o sysDescr Linux xxxxxxxxxx 3.16.0-4-amd64 #1 SMP Debian 3.16.43-2+deb8u2 (2017-06-26) x86_64 o sysName xxxxxxxxxx o Location Nuremberg, Germany o Module time 0.1379s ##### Module Start: os ##### o OS Poller Group o Hardware Generic x86 [64bit] o Version 3.16.0-4-amd64 o Features <empty> o Serial <empty> o Asset <empty> o Module time 0.2439s ##### Module Start: storage ##### +-------+--------------------+-------+--------+--------+-------+--------+ | Label | Type | Index | Total | Used | Free | Perc | +-------+--------------------+-------+--------+--------+-------+--------+ | / | host-resources-mib | 31 | 1.77TB | 1.34TB | 441GB | 75.69% | | /boot | host-resources-mib | 55 | 487MB | 55.3MB | 432MB | 11.35% | +-------+--------------------+-------+--------+--------+-------+--------+ o Module time 0.0723s ##### xxxxxxxxxx [61] completed poller modules at 2018-03-01 10:24:28 ##### o Graphs [checked] ping, ping_snmp, uptime, storage o Poller time 0.5446 seconds o Updated Data uptime, last_polled, last_polled_timetaken ##### Completed polling run at 2018-03-01 10:24:28 ##### o Devices Polled 1 o Poller Time 0.575 secs o Memory usage 12MB (peak: 14MB) o MySQL Usage Insert[1/0.007s] Update[12/0.071s] Delete[1/0.012s] Cell[2/0s] Row[17/0.007s] Rows[10/0.004s] Col[0/0s] (0.101s 17.518%) o RRDTool Usage update[6/0.007s] (0.007s 1.25%) o SNMP Usage snmpget[16/0.327s] snmpwalk[1/0.044s] (0.371s 64.468%) Did I miss something? Observium Professional 18.1.9011 under debian 4.9.0-6-amd64 #1 SMP Debian 4.9.82-1+deb9u2 (2018-02-21) x86_64 GNU/Linux Thanks Luca

4 5

Migrating to a new server
by Josh Williams 28 Feb '18

28 Feb '18

We just purchased an upgraded server in which to host Observium on and I would like to know the “best” way to migrate over all of our monitored devices. I’m not concerned with any of the graphed data being migrated, or any of the old Observium config. I only want to do a mass export of all of the devices and their properties. Will a dump of the ‘devices’ and ‘devices_locations’ tables suffice? Are there other tables/directories/configs I need to be concerned about? Thanks, Josh Williams Bureau of Technology Management WI Department of Corrections

3 4

Re: [Observium] SNMP on AXIS IP Cameras
by kayasaman 28 Feb '18

28 Feb '18

Hi, I can't say for Axis bit definitely success with Hikvision to a point. Observium does scan poll add the camera. If needing to be remote monitored from an external network over WAN there are many different ways of doing it. One way could be to use an ipsec vpn tunnel with gre then use a routing protocol like ospf . Then you could use acls as to what gets to the monitoring system etc... Regards, Kaya Sent from my Samsung Galaxy smartphone. -------- Original message --------From: Get Smarts - Web Dev <dev(a)getsmarts.com.au> Date: 2/28/18 12:40 (GMT+00:00) To: observium(a)observium.org Subject: Re: [Observium] SNMP on AXIS IP Cameras Hi Team, Has anyone had any experiences in monitoring AXIS IP Cameras sitting on an internal private network. We have a client with 20 AXIS IP Cameras sitting on a private network who requires outside monitoring of there equipment. We have been reviewing and testing port forwarding etc however would appreciate any feedback or advice that anyone may have on a simple solution (If possible) to add all 20 cameras to our Observium servers. Thank you and Regards, Jeff BarlowThe Development Team | Get Smarts Email: dev(a)getsmarts.com.au

2 1

Re: [Observium] SNMP on AXIS IP Cameras
by Get Smarts - Web Dev 28 Feb '18

28 Feb '18

Hi Team, Has anyone had any experiences in monitoring AXIS IP Cameras sitting on an internal private network. We have a client with 20 AXIS IP Cameras sitting on a private network who requires outside monitoring of there equipment. We have been reviewing and testing port forwarding etc however would appreciate any feedback or advice that anyone may have on a simple solution (If possible) to add all 20 cameras to our Observium servers. Thank you and Regards, Jeff Barlow The Development Team | Get Smarts Email: <mailto:dev@getsmarts.com.au> dev(a)getsmarts.com.au

2 1

Down Ports - Device Reboots
by Art Stephens 28 Feb '18

28 Feb '18

When I first discovered and polled these particular switches (cisco and edgeswitch) the Ports that were down were not showing up on the device_status_boxes. Which is what I expected. But today the equipment at that site was power cycled when we switched over to generator backup while the electricians hooked up the new auto switch over equipment for the new permanent backup generator. Since then device_status_boxes shows all the down ports and that the devices rebooted. So they will not go away. Other software I used in the past had a mechanism to acknowledge them and they would go away. I can find no such mechanism here to clear these unused ports etc. It has almost eight hours and they are still there What am I doing wrong? -- Arthur Stephens Senior Network Administrator Ptera Inc. PO Box 135 24001 E Mission Suite 50 Liberty Lake, WA 99019 509-927-7837 ptera.com | facebook.com/PteraInc | twitter.com/Ptera ----------------------------------------------------------------------------- "This message may contain confidential and/or propriety information, and is intended for the person/entity to whom it was originally addressed. Any use by others is strictly prohibited. Please note that any views or opinions presented in this email are solely those of the author and are not intended to represent those of the company."

2 4

Apps Alert Checker
by Simone Montagnani 27 Feb '18

27 Feb '18

Hi all, I tried to search info online but I cannot find anything about it , I was wondering if I can build an Alert Check using Apache Hits greater of a value for example, or in general if I can do it with any App, can I? Regards to all, Simone

4 3

Syslog Rules per Priority level
by Victor Zele 26 Feb '18

26 Feb '18

Hi, I have syslogs being imported to Observium real-time now and its very helpful and a great feature. My question is we would like to setup an Alert for all Error and Critical level events, but seems you can only do regex expressions on the syslog text message. Am I missing anything or does this require additional feature enhancements? Thanks, Victor -- *CONFIDENTIALITY NOTICE: * *This transmission may contain information which is Vimo, Inc. (DBA Getinsured) confidential and/or legally privileged. The information is intended only for the use of the individual or entity named on this transmission. If you are not the intended recipient, you are hereby notified that any disclosure, copying, or distribution of the contents of this transmission is strictly prohibited. If you have received this transmission in error, please immediately notify me by return e-mail and destroy all copies of the original message.*

1 0

Support for Dell S4048T-Series
by Sananikone, Athideth 25 Feb '18

25 Feb '18

Well, actually it is scanned, but only basic information is displayed. Am 24.02.18, 13:00 schrieb "observium im Auftrag von observium-request(a)observium.org" <observium-bounces(a)observium.org im Auftrag von observium-request(a)observium.org>: Support for Dell S4048T-Series

2 1

Removing Observium
by Art Stephens 24 Feb '18

24 Feb '18

I installed on a linux box in my office to try it out. Loved it so much that I replaced my OpenNMS server with it. But I can not figure out how to get the PC version at my desk to shutdown and stop polling. -- Arthur Stephens Senior Network Administrator Ptera Inc. PO Box 135 24001 E Mission Suite 50 Liberty Lake, WA 99019 509-927-7837 ptera.com | facebook.com/PteraInc | twitter.com/Ptera ----------------------------------------------------------------------------- "This message may contain confidential and/or propriety information, and is intended for the person/entity to whom it was originally addressed. Any use by others is strictly prohibited. Please note that any views or opinions presented in this email are solely those of the author and are not intended to represent those of the company."

4 6

Support for Dell S4048T-Series
by Sananikone, Athideth 23 Feb '18

23 Feb '18

Hi there, anybody knows if the Dell S4048T-Series will be supported? It's a Force10 S-Series though... Regards, Athi

3 2