- observium - lists.observium.org

Help with Alert Checker matching
by Troy 03 Aug '17

03 Aug '17

I'm hoping somebody can help with an alert checker. I'd like to look at "port_descr_notes" and if it contains NoAlert anywhere in it - not have it fire the *should be up rule*. ifAdminStatus equals up ifOperStatus equals down I've tried... port_descr_notes notmatch *NoAlert* port_descr_notes notregexp .*NoAlert.* Both with no success (they both completely invalidate the rule). The string "NoAlert" should be able to fall anywhere in the description, start, middle, end - or just completely by itself. Thank you in advance for any suggestions. Cheers, Troy -- Aperim Pty Ltd ACN 150 699 737 Disclaimer - Unless clearly stated otherwise this email and any files transmitted with it should be considered without prejudice and are confidential and contain privileged or copyright information. You must not present this message to another party without gaining permission from the sender. If you are not the intended recipient you must not copy, distribute or use this email or the information contained in it for any purpose other than to notify us. Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of this company or its subsidiaries.

2 1

Adding puppet run alerts
by Timothy Illguth 03 Aug '17

03 Aug '17

Help Please, I'm trying to add a puppet run succeeded/failed alerts to my observium alerts page. Has anyone succeeded in this endeavor? -- ___________________________ Tim Illguth Jr. Systems Administrator Alaska Satellite Facility (907) 474-7924

4 8

Wildcards in hostname device match not working
by Sebastian Klute 03 Aug '17

03 Aug '17

Hello everyone, today I noticed that wildcards are not working anymore if I use them for hostnames as I create new alert checker. the hostnames I try to trigger are commonly looking like this: vh01-name vh02-name ... vh16-name Simple running numbers counting up and the rest is the same. I tried the following masks as match: *name* vh* vh*-name none of the above are working. The current workaround is to write a hostname check for every machine, as I got 16 Device Match entries at the moment. Could this be because of the !=/ne operand I use? Because the logical function I try to accomplish is filtering out specific servers from a alerter, so they will be ignored and not checked. Can you give an advise? Thanks and much regards, Sebastian

2 1

Wildcards in hostname device match not working
by Sebastian Klute 03 Aug '17

03 Aug '17

Hello, please ignore the last mail I send regarding the wildcards. I found the problem and a working solution. Thanks anyway, Sebastian -- Accelerated IT Services GmbH Kruppstraße 105 - 60388 Frankfurt - Germany sk(a)accelerated.de - http://www.accelerated.de/ Phone: +49 69 - 900 180 41 - Fax: +49 69 - 900 180 90 HRB: 60665 - Amtsgericht Ludwigshafen - VatID: DE253684415 Managing Directors: Nicolaj Kamensek & Ole Krieger

1 0

Subscription Support
by Kevin Jacobson 02 Aug '17

02 Aug '17

Looking for assistance on extending our subscription. I'm a current subscriber with an expiration of 2017-01-23 and I wanted to renew early to spend the money this year. I paid for another year, but instead of extending our current subscription a new SVN account was created with its own expiration. Is there a way to just extend our exiting one an additional 12 months instead? Leaving important info out of this message - please contact me privately. :) Thanks! Kevin

6 10

Support for Aruba IAP (model: 335 fw:6.5.1.5)
by Thomas Stather 01 Aug '17

01 Aug '17

Hi We are running some Instant APs from Aruba (Model: IAP-335 with firmware 6.5.1.5-4.3.1.4) and i was wondering if you can implement support for these models? The MIBs are fw-related and for every AP in Observium, the graphs "Number of APs", "Wireless Clients" show no data. Attached are the MIBs for this firmware release Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV Tel: +49 6221-486 628 Fax: +49 6221-486 561 ------------------------------------------------------------------------ Max Planck Institute for Medical Research (MPImF) Jahnstrasse 29, 69120 Heidelberg Germany

1 1

Cannot find module (LM-SENSORS-MIB) after community edition upgrade
by Kelley, Ronald E. 01 Aug '17

01 Aug '17

[cid:image001.png@01D30A1C.563BFB90] Alerts checker page generates ERROR 500 and fails to display any content. How can I regenerate it? Version Information Observium CE 0.16.10.8128 (6th October 2016) OS Linux 3.16.0-4-amd64 [amd64] (Debian 8.4) Apache Apache PHP 5.6.30-0+deb8u1 (OPcache: ENABLED) Python 2.7.9 MySQL 5.5.57-0+deb8u1 (extension: mysqli 5.5.57) SNMP NET-SNMP 5.7.2.1 RRDtool 1.4.8 Ronald Kelley Director of Network Hospitals, IT Operations Information Technology Division Houston Methodist Houston Methodist. Leading Medicine. U.S. News & World Report has recognized Houston Methodist as one of the nation’s top 20 hospitals, placing it for the second time on the magazine’s prestigious Honor Roll. It is also designated as a Magnet hospital for excellence in nursing. Visit us at houstonmethodist.org. Follow us at twitter.com/MethodistHosp and facebook.com/HoustonMethodist. ***CONFIDENTIALITY NOTICE*** This e-mail is the property of Houston Methodist and/or its relevant affiliates and may contain restricted and privileged material for the sole use of the intended recipient(s). Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender and delete all copies of the message. Thank you.

2 2

observium CE - custom alert contacts
by Patricio Hernan Besteiro 01 Aug '17

01 Aug '17

is it possible to add email contacts per alert checker on Observium CE? I can do that only using "default email" or snmp configuration. thanks in advance, Patricio B.

2 1

Observium PRO - Weathermap
by Serghei Golipad 31 Jul '17

31 Jul '17

Guys, Anyone encountered this: ./map-poller.php PHP Fatal error: Uncaught Error: Call to undefined function is_cli() in /opt/observium/includes/definitions.inc.php:183 Stack trace: #0 /opt/observium/html/weathermap/map-poller.php(55): include() #1 {main} thrown in /opt/observium/includes/definitions.inc.php on line 183 map-poller.php line 55: 55 include("../../includes/definitions.inc.php"); definitions.inc.php line 183: 182 // Overwrite the autogenerated base_url with external_url when we're on CLI. 183 if(is_cli()) 184 { 185 $config['base_url'] = $config['external_url']; 186 } I'm guessing this is to do with base_url but unsure what exactly? Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

2 1

professional subscription expired
by Satish Patel 28 Jul '17

28 Jul '17

We had professional version and it seems it has been expired because when i run svn it prompt me password which first time happened, do i need to pay every every for subscription?

2 6

Observium Pro - Empty Alert
by Serghei Golipad 27 Jul '17

27 Jul '17

Guys, Anyone experienced this before? I'm getting an empty alert as follows followed by actual alert which contains correct details: Modify Alert Metrics Duration Device Device Hardware Operating System Location Uptime Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

6 6

Request for LigoWave Wireless MIB support
by Martin 25 Jul '17

25 Jul '17

Hello Observium developers, It would be highly appreciated if it is possible to add support for LigoWave Wireless equipment in Observium. Currently the LigoWave equipment shows as a generic Linux machine in Observium. Attached are smpwalks for the LigoWave LigoPTP 5-23 RapidFire and for the LigoWave LigoPTP 5-23 PRO, as well as the mib definition files. Is there any more info needed, or anything else I can do to help? Best regards, Martin -- M. Moens iVent Mobile

1 0

Location of Data
by Mal Evans 25 Jul '17

25 Jul '17

Hi All - recently broke my Observium install during a Ubuntu upgrade so now I am looking to build Observium on a new box. I inherited this install and have only used it a small degree so it is fair to say I am not very familiar with the overall package but want to get a better understanding an expand my usage as much as possible. For my new install I would like to be able to retain access to the historical data that has been collected (if possible). I am hoping someone will be able to give me a quick rundown on what parts of the current install I should be backing up? I have taken a copy of the mysql DB to start with but I am not sure if I should be taking something else as well. Appreciate any assistance. Cheers Mal

3 3

V2C works perfectly but v3 doesnt work
by Uthayanan 25 Jul '17

25 Jul '17

Hi Team, I am in the process of upgrading the SNMP version from v2c to v3. I have tested with few test units but in all cases, I can do the polling via v2c without any issue but when I use v3 it doesn't work. I tried with noauth , auth and auth&priv options but in all option I get an error msg saying I couldn't connect to the end device via the V3 parameters Any help on this is highly appreciated Thank You Uthay

3 5

Geolocation Lookups stopped when updating to 17.5.8580
by Peter Smith 20 Jul '17

20 Jul '17

Hi, After upgrading from version 17.5.8580 to version 17.7.8697 the geolocation lookups using Openstreetmap seem to have stopped. The event logs used to be full of lines such as: Geolocation (OPENSTREETMAP) -> [43.719989, -71.004577] United States (Country), New York (State), New York (County), New York (City) These are now completely missing. This means the location for all devices is now unknown. I have another server on version 17.5.8580 with identical configuration which is still able to do the geolocation lookups. Here is the relevant output from config.php: $config['geocoding']['enable'] = TRUE; // Enable Geocoding $config['geocoding']['location_menu_geocoded'] = TRUE; $config['geocoding']['api'] = 'mapquest'; $config['geocoding']['api']['key'] = '<HIDDEN>'; $config['geocoding']['default']['lat'] = "51.5111119"; // Default latitude $config['geocoding']['default']['lon'] = "-0.0059373"; // Default longitude What do I need to change in order to get the geolocation lookups working again? I do not need to use Openstreetmap if there is another free option I am happy to change if required. Thanks, Peter

2 1

Re: [Observium] Important polling time increase since upgrade to r8697
by Youssef BENGELLOUN - ZAHR 20 Jul '17

20 Jul '17

1 0

Re: [Observium] Important polling time increase since upgrade to r8697
by Youssef BENGELLOUN - ZAHR 19 Jul '17

19 Jul '17

2 1

Important polling time increase since upgrade to r8697
by Youssef BENGELLOUN - ZAHR 19 Jul '17

19 Jul '17

4 5

Room Alert 32E/W
by Todd Hank 18 Jul '17

18 Jul '17

I see that you have added support for other Room Alert devices. I am wondering if you would be considering the device we are running. I have attached the MIBs file from the device. Todd Todd Hank Senior Network Administrator (920) 749-0444 Ext. 128 Todd.Hank(a)i-car.com STAY CONNECTED: [cid:image1c6adc.GIF@06c91f50.4ca84b13]<https://www.facebook.com/icareducation> [cid:image1cec3d.GIF@bea76625.40b687ab] <https://www.twitter.com/i_car_education> [cid:image2b9e10.GIF@677dea1e.4283f042] <https://www.instagram.com/icar_education> [cid:imaged141ae.GIF@b2448277.4784c2d2] <https://www.linkedin.com/company-beta/40619> [cid:image228c6b.GIF@2c54aba8.47bbc1f0] <https://www.youtube.com/user/icartraining> <https://www.linkedin.com/company-beta/40619> <https://www.youtube.com/user/icartraining> <https://www.instagram.com/icar_education> <https://www.linkedin.com/company-beta/40619> I-CAR.com<http://www.i-car.com> | RTS<http://rts.i-car.com/> | Collision Reporter Magazine<https://www.i-car.com/collisionreporter> [cid:830d8f.png@ec8c9ba4.4b8a25d3] ________________________________ This message, including any attachments, is intended only for the use of the individual or entity to which it is addressed, and may contain confidential information. Please do not disseminate this message without the permission of the sender. If you have received this communication in error, please notify the sender by reply e-mail, and delete the original message, and all copies, from your system, without reading it. Any dissemination, distribution or copying of this communication is strictly prohibited, and may be a violation of applicable laws.

2 2

CPU / Memory mini-graphs missing with Brocade VDX switchs
by Youssef BENGELLOUN - ZAHR 17 Jul '17

17 Jul '17

2 5

Broke Apache changing Observium IP
by Todd Hank 14 Jul '17

14 Jul '17

Wow dummy move on my part. The Observium server was still running with DHCP so I went in and changed tio to a static IP and now when I try to access Observium, I get the apache “It Works!” page. Little help…please. Thank you Todd Hank Senior Network Administrator (920) 749-0444 Ext. 128 Todd.Hank(a)i-car.com STAY CONNECTED: [cid:imagea7c0ca.GIF@5858264a.42b00101]<https://www.facebook.com/icareducation> [cid:imaged285a7.GIF@c2ad8091.49b95011] <https://www.twitter.com/i_car_education> [cid:image79644f.GIF@d2a4fea3.4f84c726] <https://www.instagram.com/icar_education> [cid:imagef88f6c.GIF@629acfbd.47be2236] <https://www.linkedin.com/company-beta/40619> [cid:image25f851.GIF@f662ca34.45a7fd57] <https://www.youtube.com/user/icartraining> <https://www.linkedin.com/company-beta/40619> <https://www.youtube.com/user/icartraining> <https://www.instagram.com/icar_education> <https://www.linkedin.com/company-beta/40619> I-CAR.com<http://www.i-car.com> | RTS<http://rts.i-car.com/> | Collision Reporter Magazine<https://www.i-car.com/collisionreporter> [cid:2888fd.png@a45f5aee.42be349c] ________________________________ This message, including any attachments, is intended only for the use of the individual or entity to which it is addressed, and may contain confidential information. Please do not disseminate this message without the permission of the sender. If you have received this communication in error, please notify the sender by reply e-mail, and delete the original message, and all copies, from your system, without reading it. Any dissemination, distribution or copying of this communication is strictly prohibited, and may be a violation of applicable laws.

2 5

HP RAID and Exchange 2010
by Todd Hank 14 Jul '17

14 Jul '17

I have been running the Pro version for 24 hours now. Really like what I see. Couple things I am looking to be able to monitor. I have one Supermicro server with windows 2008r2 and it is reporting in the individual raid drive status. This is great so I added another server HP dl380 running windows 2008r2 and I don’t see the raid drive statuses. How can I add theses? On the same HP DL380 we are running Exchange 2010. I was hoping I could get some monitoring of Exchange as well. I would appreciate any help. Thanks, Todd Hank Senior Network Administrator (920) 749-0444 Ext. 128 (920) 749-0336 - Fax Todd.Hank(a)i-car.com [cid:dcf71c.png@754d93e9.418acefd] ________________________________ This message, including any attachments, is intended only for the use of the individual or entity to which it is addressed, and may contain confidential information. Please do not disseminate this message without the permission of the sender. If you have received this communication in error, please notify the sender by reply e-mail, and delete the original message, and all copies, from your system, without reading it. Any dissemination, distribution or copying of this communication is strictly prohibited, and may be a violation of applicable laws.

7 18

SNMPD on Ubuntu
by Todd Hank 14 Jul '17

14 Jul '17

I am looking to get more and more items working and now I am looking at the Ubuntu servers we have. After attempting to setup my first server I get the output below when running the snmpwalk command. Seems there is a permission issue. iso.3.6.1.4.1.2021.7890.1.1.0 = INTEGER: 1 iso.3.6.1.4.1.2021.7890.1.2.1.2.6.100.105.115.116.114.111 = STRING: "/usr/bin/distro" iso.3.6.1.4.1.2021.7890.1.2.1.3.6.100.105.115.116.114.111 = "" iso.3.6.1.4.1.2021.7890.1.2.1.4.6.100.105.115.116.114.111 = "" iso.3.6.1.4.1.2021.7890.1.2.1.5.6.100.105.115.116.114.111 = INTEGER: 5 iso.3.6.1.4.1.2021.7890.1.2.1.6.6.100.105.115.116.114.111 = INTEGER: 1 iso.3.6.1.4.1.2021.7890.1.2.1.7.6.100.105.115.116.114.111 = INTEGER: 1 iso.3.6.1.4.1.2021.7890.1.2.1.20.6.100.105.115.116.114.111 = INTEGER: 4 iso.3.6.1.4.1.2021.7890.1.2.1.21.6.100.105.115.116.114.111 = INTEGER: 1 iso.3.6.1.4.1.2021.7890.1.3.1.1.6.100.105.115.116.114.111 = STRING: "/usr/bin/distro: Permission denied" iso.3.6.1.4.1.2021.7890.1.3.1.2.6.100.105.115.116.114.111 = STRING: "/usr/bin/distro: Permission denied" iso.3.6.1.4.1.2021.7890.1.3.1.3.6.100.105.115.116.114.111 = INTEGER: 1 iso.3.6.1.4.1.2021.7890.1.3.1.4.6.100.105.115.116.114.111 = INTEGER: 1 iso.3.6.1.4.1.2021.7890.1.4.1.2.6.100.105.115.116.114.111.1 = STRING: "/usr/bin/distro: Permission denied" Todd Hank Senior Network Administrator (920) 749-0444 Ext. 128 Todd.Hank(a)i-car.com STAY CONNECTED: [cid:imagee3a7d5.GIF@32fde44b.43ba959e]<https://www.facebook.com/icareducation> [cid:image362e7f.GIF@847bc8ce.46bea44d] <https://www.twitter.com/i_car_education> [cid:image74a52d.GIF@2e3469c1.4ca12d9b] <https://www.instagram.com/icar_education> [cid:imagea7956a.GIF@beba141d.4e83ac32] <https://www.linkedin.com/company-beta/40619> [cid:image190342.GIF@b6c15ef2.4d8c69dd] <https://www.youtube.com/user/icartraining> <https://www.linkedin.com/company-beta/40619> <https://www.youtube.com/user/icartraining> <https://www.instagram.com/icar_education> <https://www.linkedin.com/company-beta/40619> I-CAR.com<http://www.i-car.com> | RTS<http://rts.i-car.com/> | Collision Reporter Magazine<https://www.i-car.com/collisionreporter> [cid:b8949d.png@5be8669d.4e8ba456] ________________________________ This message, including any attachments, is intended only for the use of the individual or entity to which it is addressed, and may contain confidential information. Please do not disseminate this message without the permission of the sender. If you have received this communication in error, please notify the sender by reply e-mail, and delete the original message, and all copies, from your system, without reading it. Any dissemination, distribution or copying of this communication is strictly prohibited, and may be a violation of applicable laws.

4 8

Juniper SRX340
by John Klasa 13 Jul '17

13 Jul '17

Hi, I have an issue with a SRX340 device running 15.1X49-D90 and it seems to poll sessions from the device but Observium is unable to graph and draw the graphs? Looks like this. [cid:image001.png@01D2FBE9.A484BD00] __________________________________________________ Any debugging I can do to find out? I did a poller -dd and it looks like this: less /var/tmp/fw5.log | egrep -i session SQL[SELECT @@SESSION.sql_mode;] SQL[SELECT @@SESSION.sql_mode;] jnxJsSPUMonitoringCurrentFlowSession.0 = 184 jnxJsSPUMonitoringMaxFlowSession.0 = 262144 jnxJsSPUMonitoringCurrentCPSession.0 = 0 jnxJsSPUMonitoringMaxCPSession.0 = 0 [jnxJsSPUMonitoringCurrentFlowSession] => string(3) "184" [jnxJsSPUMonitoringMaxFlowSession] => string(6) "262144" [jnxJsSPUMonitoringCurrentCPSession] => string(1) "0" [jnxJsSPUMonitoringMaxCPSession] => string(1) "0" ds[CurrentFlowSession].index = 0 ds[CurrentFlowSession].type = "GAUGE" ds[CurrentFlowSession].minimal_heartbeat = 600 ds[CurrentFlowSession].min = 0.0000000000e+00 ds[CurrentFlowSession].max = 1.0000000000e+11 ds[CurrentFlowSession].last_ds = "195" ds[CurrentFlowSession].value = 1.1503313835e+04 ds[CurrentFlowSession].unknown_sec = 0 ds[MaxFlowSession].index = 1 ds[MaxFlowSession].type = "GAUGE" ds[MaxFlowSession].minimal_heartbeat = 600 ds[MaxFlowSession].min = 0.0000000000e+00 ds[MaxFlowSession].max = 1.0000000000e+11 ds[MaxFlowSession].last_ds = "262144" ds[MaxFlowSession].value = 1.5464229241e+07 ds[MaxFlowSession].unknown_sec = 0 ds[CurrentCPSession].index = 2 ds[CurrentCPSession].type = "GAUGE" ds[CurrentCPSession].minimal_heartbeat = 600 ds[CurrentCPSession].min = 0.0000000000e+00 ds[CurrentCPSession].max = 1.0000000000e+11 ds[CurrentCPSession].last_ds = "0" ds[CurrentCPSession].value = 0.0000000000e+00 ds[CurrentCPSession].unknown_sec = 0 ds[MaxCPSession].index = 3 ds[MaxCPSession].type = "GAUGE" ds[MaxCPSession].minimal_heartbeat = 600 ds[MaxCPSession].min = 0.0000000000e+00 ds[MaxCPSession].max = 1.0000000000e+11 ds[MaxCPSession].last_ds = "0" ds[MaxCPSession].value = 0.0000000000e+00 ds[MaxCPSession].unknown_sec = 0 'CurrentFlowSession' => array('label' => 'CurrentFlowSession'), 'MaxFlowSession' => array('label' => 'MaxFlowSession'), 'CurrentCPSession' => array('label' => 'CurrentCPSession'), 'MaxCPSession' => array('label' => 'MaxCPSession'), fdb_count,jnxJsSPUMonitoringFlowSessions, jnxJsSPUMonitoringCPSessions, poller_perf It seems Observium is getting the value from the device? Regards -John

3 6

Nested alert device matching?
by Ron Marosko 13 Jul '17

13 Jul '17

Howdy Guys, I'm trying to figure out how I can build a "nested" for lack of better description device matching script. For example, "type equals network AND hostname match *domain1.com*". Or, "type equals network AND hostname notmatch *domain2.com*". I can't just use a "hostname match *domain1.com*" because I also have devices in other groups with the same hostname match, but don't want to alert-check on those other groups. I'm sure there's a way to do this, I'm just not figuring it out, and apparently my search-fu is weak. Thanks, Ron -- Ron Marosko, Jr. . . . . . . . . . . . . . . . . . . . . . . . . . . CCIE No. 4526 (R/S), NN5DX Senior Network Engineer RJR Services, Inc. 1108 West Dickinson Blvd, Suite A Fort Stockton, TX 79735 USA o: +1 432 336 5600 x115 c: +1 432 290 6344 e: <mailto:ron@rjr-services.com> ron(a)rjr-services.com pgp pubkey: <http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x778B3B0258AB8B5C> 0x58AB8B5C "To know me is to fly with me." -- This message has been scanned by E.F.A. Project and is believed to be clean.

3 3

how to create custom sensor threshold for some devices?
by Thomas Stather 13 Jul '17

13 Jul '17

Hi I am running Observium Professional an im havving an issue with some sensors in our environment I have a sensor that is always generating an alert: Index: hh3cEntityExtTemperature.112 Class: temperature min: 0 degrees max: 0 degrees current: 40 degrees I have many of them on one device i.e.: hh3cEntityExtTemperature.112 hh3cEntityExtTemperature.122 hh3cEntityExtTemperature.262 hh3cEntityExtTemperature.267 Additionally, all switches of this kind are producing the alerts since they all have the indexes and the incorrect threshold. How can i set a custom threshold that is valid for all of these switches and Indexes (the indexes are equal on all of the switches)? Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV Tel: +49 6221-486 628 Fax: +49 6221-486 561 ------------------------------------------------------------------------ Max Planck Institute for Medical Research (MPImF) Jahnstrasse 29, 69120 Heidelberg Germany

2 1

Account Activation
by Nick Pratley 13 Jul '17

13 Jul '17

Hey, Can someone please re-send activation email to me ☺ Groups were broken at the time we registered, so rejected the email and it hasn’t come through again ☹ Username is batman. Cheers Nick P

2 1

Ports sensors missing for Brocade VDX 6940/6740
by Youssef BENGELLOUN - ZAHR 12 Jul '17

12 Jul '17

3 27

Brocade VDX switchs - difference in OS versions display
by Youssef BENGELLOUN - ZAHR 12 Jul '17

12 Jul '17

3 13

Alert checker for APC ups
by Daniel Johansson 07 Jul '17

07 Jul '17

Hi I'm tring to figure out how to create an alert checker for when the UPS loses external Power. See the attached Picture. The OK or OnLine are the ones I want to look at and create an alert from. Anyone have any ideas? Did a debug during polling of the ups and got this but I can't figure out how to use it in the alert checker. Output Status powernet-upsbasicoutput-state upsBasicOutputStatus.0 snmp onLine ok 2017-07-06 10:02:39 Regards Daniel

4 6

All devices a new field "Note"
by Krenek Milan DiS. 04 Jul '17

04 Jul '17

Hi, Can I have wish to improve monitoring system :) Is possible implement for all devices a new field "Note" for write notes like in VmWare? BR Milan

1 0

List of installed application / running process
by Krenek Milan DiS. 04 Jul '17

04 Jul '17

Hi, Can I have wish to improve monitoring system :) Is possible implement for devices Custom OID with list like examples bellow or implement list of install application snmptable -v1 -c Public servername .1.3.6.1.2.1.25.6.3 or list of running processes snmptable -v1 -c Public servername .1.3.6.1.2.1.25.4.2 and possibilty create alert when running process is not in the list ;-) S přátelským pozdravem / Mit freundlichen Grüßen BR Milan

1 0

Show server network shares
by Krenek Milan DiS. 04 Jul '17

04 Jul '17

Hi, Can I have wish to improve monitoring system :) Is possible implemet to device information "network shares" from Windows system? BR Milan

1 0

Alert Checkers and Mail Settings
by Kaustubh Parthasarthy, CLSA 03 Jul '17

03 Jul '17

Hello Experts, Quick one, I have Port Down Alerts on my Alerts section. I have not disabled the polling and alerts for those ports on the respective devices. But inspite of it, I still see those alerts in my alerts section. Does it clear or something just because we have disabled the polling for those ports which are down. ??? Also, I have put my mail ID as contact and enabled the mail alerts. For example, I have 50 alerts in my alerts section: [cid:image001.png@01D2F3D8.B1EB9EA0] So I get an alert flood in my mail box for those 50 alerts all once. I have my refresh interval of 5 mins, so after 5 mins I get the flood of 50 mail alerts again ? Why there is a recurring of the mail alerts ? PS: I have disabled the: RECOVERY in the alert checks still getting flood of alerts and it keeps repeating Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Friday, June 30, 2017 3:54 PM To: Observium Cc: observium Subject: Re: [Observium] Alert Checkers No. Disabling polling disables, well, polling. How do you expect Observium to know a port has gone down if it isn't being polled? Oo Adam. Sent from BlueMail<http://www.bluemail.me/r?b=9856> On 30 Jun 2017, at 11:06 am, "Kaustubh Parthasarthy, CLSA" <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: Hello Experts, I See there 2 settings for ports on the device: [cid:image002.png@01D2F1B6.82235060] My question is, if we disable Polling and only keep Alerts, will the alerts fire for Port down ?? Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Stef Renders Sent: Friday, June 30, 2017 2:50 PM To: Observium; observium Subject: Re: [Observium] Alert Checkers Small remark, Your OSPF alert should be defined as a syslog alert, which I’m not sure if its available in CE yet. It says it’s being checked, but actually it’s not since the condition or test will not do anything. Kind regards From: observium [mailto:observium-bounces@observium.org] On Behalf Of Kaustubh Parthasarthy, CLSA Sent: vrijdag 30 juni 2017 11:09 To: Observium <observium(a)observium.org<mailto:observium@observium.org>>; Observium <observium(a)observium.org<mailto:observium@observium.org>>; observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> Cc: observium(a)observium.org<mailto:observium@observium.org> Subject: Re: [Observium] Alert Checkers Thank you Simon, It worked after rebuild: [cid:image003.png@01D2F1B6.82235060] I did not find in the documentation to rebuild after every time, we add some alert checkers. Anyways Thanks guys ☺ very helpful you are. I will also try to pitch in if I can help or assist someone solve some issues. Cheers Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Simon Mousey Smith Sent: Friday, June 30, 2017 2:28 PM To: Observium Subject: Re: [Observium] Alert Checkers Hi, Have you clicked the ‘Rebuild' at the top of the Alert Checks Page next to the ‘Add Syslog Rule'? Every time you change something in the alerts check page you have to rebuild!? Regards Simon On 30 Jun 2017, at 09:54, Kaustubh Parthasarthy, CLSA <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: Adam, I am seeing some assistance here. Let me give you a scenario here. I want Observium to alert me when my Port is “DOWN” If I put a condition as ifOperStatus equals up ifAdminStatus equals up What is use of the alerting ? I do not want alerts if my port is UP. I hope you get it. Please explain. Also FYI, even if I change the entity type to “Port” from Device, then also no luck. If you want me to pay more attention, let me get an example to you: You have BGP example on your “Excellent Website” : <image001.png> Look at my alert Check: <image002.png> Now tell me why no number count here. I am trying to understand the tool here, as I am using this for the first time, hence asking you to please assist. Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Friday, June 30, 2017 2:17 PM To: observium(a)observium.org<mailto:observium@observium.org> Subject: Re: [Observium] Alert Checkers That isn't a port alert. It's a device alert. It's very, very important that the entity type is set correctly. Also you have switched "equals" to "notequals", which means the checker no longer makes sense. Please pay more attention to the specific details of the examples. adam. On 30/06/2017 09:44:13, Kaustubh Parthasarthy, CLSA <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: Example in the documentation: Port status should be down for the alert, I have mentioned notequals up in my below snippet, but still no count is reproducing Regards kaustubh From: Kaustubh Parthasarthy, CLSA Sent: Friday, June 30, 2017 2:09 PM To: 'Observium' Cc: 'Observium Public Support'; 'observium(a)observium.org<mailto:observium@observium.org>' Subject: RE: [Observium] Alert Checkers Hi Team, TO add on the below, I have referred to the documentation section, The settings I have: The settings seems correct, they why it does not reflect anything in the count section ? Regards Kaustubh From: Kaustubh Parthasarthy, CLSA Sent: Friday, June 30, 2017 2:04 PM To: observium(a)observium.org<mailto:observium@observium.org> Cc: Observium Public Support; observium(a)observium.org<mailto:observium@observium.org> Subject: RE: [Observium] Alert Checkers HI Team, Could you give me a working example of the alert checker ? Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Friday, June 30, 2017 1:13 PM To: observium(a)observium.org<mailto:observium@observium.org> Subject: Re: [Observium] Alert Checkers This suggests that the alert table hasn't been regenerated since you created these alert checkers. Note that the OSPF one won't ever work, because it's just a bunch of nonsense text which doesn't match the checker format. Also the temperature alert, sensor event alert and port operational status alerts won't work because they don't really make any sense. You need to read the documentation and examples about creating alert checkers again. Thanks, adam. On 30/06/2017 08:12:59, Kaustubh Parthasarthy, CLSA <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: Thank you for the Response Adam, Was also wondering, I have added some alert checks for Network related testing. If you see, the one highlighted are for Network related alerts, but I seem to have some issue here. If you look at the above for the CPU, Memory, Storage, etc the tool is able to detect and show the numbers in “Green” and “Red” But there is nothing indicating for BGP, high temperature and other highlighted alert checkers. Am I doing something different here or my alert conditions have issues ? Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Friday, June 30, 2017 10:27 AM To: Observium Cc: Kunal Shah, CLSA; observium(a)observium.org<mailto:observium@observium.org> Subject: Re: [Observium] Process Level Alerts in Observium Hi, This isn't possible, and would actually be pretty complicated to do. Not least because Observium doesn't yet collect per-process data! Thanks, Adam. Sent from BlueMail<http://www.bluemail.me/r?b=9856> On 30 Jun 2017, at 4:57 am, "Kaustubh Parthasarthy, CLSA" <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: Hi Team, First, I would like to subscribe to the Observium mailing list. Second, i am using the Community Edition of Observium. Following are the details: I have setup some alert checks to capture the high CPU alerts. I was also successful to capture some alert. PFA the results. I would like to know, if we can also show, which are the top 10 processes, which are running and as a result the utilization is going high. If I can get the output of the top 10 or top 5 processes on the same mail which is attached, this would assist the support teams to troubleshoot. Could you please assist on this as to how can I setup ? Thank you and Regards Kaustubh The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact. ________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact. The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact. The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact. _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact. The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact. ________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact.

2 1

New request created with ID: ##398## from observium-request
by SABIN SUBRAMANNIAN 02 Jul '17

02 Jul '17

1 0

Re: [Observium] observium Digest, Vol 84, Issue 1
by 张来 01 Jul '17

01 Jul '17

hello！I am ob user. I think I lost my observium svn username and password. Can you help me to set my usernane and password as username：yuri password：Ad2003@0407 Thank you！发自我的 iPhone > 在 2017年7月1日，19:00，observium-request@observium.org 写道： > > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: Alert Checkers (Kaustubh Parthasarthy, CLSA) > 2. Re: Alert Checkers (Kaustubh Parthasarthy, CLSA) > 3. Re: Alert Checkers (Adam Armstrong) > 4. Re: Alert Checkers (Kaustubh Parthasarthy, CLSA) > 5. Re: python-wrapper loop? (John Klasa) > 6. Re: Alert Checkers (Thomas Nicholson) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 30 Jun 2017 11:07:11 +0000 > From: "Kaustubh Parthasarthy, CLSA" <kaustubh.parthasarthy(a)clsa.com> > To: Observium <observium(a)observium.org> > Cc: observium <observium-bounces(a)observium.org> > Subject: Re: [Observium] Alert Checkers > Message-ID: > <FB5687B07A6D2240865CB25880DDF15654BAED99(a)zklnwp367.int.clsa.com> > Content-Type: text/plain; charset="utf-8" > > Hello Experts, > > Quick one, > > I have Port Down Alerts on my Alerts section. > > I have not disabled the polling and alerts for those ports on the respective devices. > > But inspite of it, I still see those alerts in my alerts section. Does it clear or something just because we have disabled the polling for those ports which are down. ??? > > Also, I have put my mail ID as contact and enabled the mail alerts. > > For example, I have 50 alerts in my alerts section: > > [cid:image001.png@01D2F1BF.1E7B2480] > > So I get an alert flood in my mail box for those 50 alerts all once. I have my refresh interval of 5 mins, so after 5 mins I get the flood of 50 mail alerts again ? > > Why there is a recurring of the mail alerts ?? > > PS: I have disabled the: RECOVERY in the alert checks still getting flood of alerts and it keeps repeating > > Regards > Kaustubh > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong > Sent: Friday, June 30, 2017 3:54 PM > To: Observium > Cc: observium > Subject: Re: [Observium] Alert Checkers > > No. Disabling polling disables, well, polling. > How do you expect Observium to know a port has gone down if it isn't being polled? Oo > Adam. > Sent from BlueMail<http://www.bluemail.me/r?b=9856> > On 30 Jun 2017, at 11:06 am, "Kaustubh Parthasarthy, CLSA" <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: > Hello Experts, > > > I See there 2 settings for ports on the device: > > > [cid:image002.png@01D2F1B6.82235060] > > > My question is, if we disable Polling and only keep Alerts, will the alerts fire for Port down ?? > > > Regards > Kaustubh > > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Stef Renders > Sent: Friday, June 30, 2017 2:50 PM > To: Observium; observium > Subject: Re: [Observium] Alert Checkers > > > Small remark, > > > Your OSPF alert should be defined as a syslog alert, which I’m not sure if its available in CE yet. It says it’s being checked, but actually it’s not since the condition or test will not do anything. > > > Kind regards > > > > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Kaustubh Parthasarthy, CLSA > Sent: vrijdag 30 juni 2017 11:09 > To: Observium <observium(a)observium.org<mailto:observium@observium.org>>; Observium <observium(a)observium.org<mailto:observium@observium.org>>; observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> > Cc: observium(a)observium.org<mailto:observium@observium.org> > Subject: Re: [Observium] Alert Checkers > > > Thank you Simon, > > > It worked after rebuild: > > > [cid:image003.png@01D2F1B6.82235060] > > > I did not find in the documentation to rebuild after every time, we add some alert checkers. > > > Anyways Thanks guys ☺ very helpful you are. I will also try to pitch in if I can help or assist someone solve some issues. Cheers > > > Regards > Kaustubh > > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Simon Mousey Smith > Sent: Friday, June 30, 2017 2:28 PM > To: Observium > Subject: Re: [Observium] Alert Checkers > > > Hi, > > > Have you clicked the ‘Rebuild' at the top of the Alert Checks Page next to the ‘Add Syslog Rule'? > > > Every time you change something in the alerts check page you have to rebuild!? > > > Regards > > > Simon > > > On 30 Jun 2017, at 09:54, Kaustubh Parthasarthy, CLSA <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: > > > Adam, > > I am seeing some assistance here. > > Let me give you a scenario here. I want Observium to alert me when my Port is “DOWN” > > If I put a condition as > > ifOperStatus equals up > ifAdminStatus equals up > > What is use of the alerting ? I do not want alerts if my port is UP. I hope you get it. Please explain. > > Also FYI, even if I change the entity type to “Port” from Device, then also no luck. > > If you want me to pay more attention, let me get an example to you: > > You have BGP example on your “Excellent Website” : > > <image001.png> > > Look at my alert Check: > > <image002.png> > > Now tell me why no number count here. > > I am trying to understand the tool here, as I am using this for the first time, hence asking you to please assist. > > Regards > Kaustubh > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong > Sent: Friday, June 30, 2017 2:17 PM > To: observium(a)observium.org<mailto:observium@observium.org> > Subject: Re: [Observium] Alert Checkers > > That isn't a port alert. It's a device alert. > > It's very, very important that the entity type is set correctly. Also you have switched "equals" to "notequals", which means the checker no longer makes sense. > > Please pay more attention to the specific details of the examples. > > adam. > On 30/06/2017 09:44:13, Kaustubh Parthasarthy, CLSA <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: > Example in the documentation: > > Port status should be down for the alert, I have mentioned notequals up in my below snippet, but still no count is reproducing > > Regards > kaustubh > From: Kaustubh Parthasarthy, CLSA > Sent: Friday, June 30, 2017 2:09 PM > To: 'Observium' > Cc: 'Observium Public Support'; 'observium(a)observium.org<mailto:observium@observium.org>' > Subject: RE: [Observium] Alert Checkers > > Hi Team, > > TO add on the below, > > I have referred to the documentation section, > > > The settings I have: > > > > The settings seems correct, they why it does not reflect anything in the count section ? > > Regards > Kaustubh > From: Kaustubh Parthasarthy, CLSA > Sent: Friday, June 30, 2017 2:04 PM > To: observium(a)observium.org<mailto:observium@observium.org> > Cc: Observium Public Support; observium(a)observium.org<mailto:observium@observium.org> > Subject: RE: [Observium] Alert Checkers > > HI Team, > > Could you give me a working example of the alert checker ? > > Regards > Kaustubh > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong > Sent: Friday, June 30, 2017 1:13 PM > To: observium(a)observium.org<mailto:observium@observium.org> > Subject: Re: [Observium] Alert Checkers > > This suggests that the alert table hasn't been regenerated since you created these alert checkers. > > Note that the OSPF one won't ever work, because it's just a bunch of nonsense text which doesn't match the checker format. > > Also the temperature alert, sensor event alert and port operational status alerts won't work because they don't really make any sense. > > You need to read the documentation and examples about creating alert checkers again. > > Thanks, > adam. > On 30/06/2017 08:12:59, Kaustubh Parthasarthy, CLSA <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: > Thank you for the Response Adam, > > Was also wondering, I have added some alert checks for Network related testing. > > > If you see, the one highlighted are for Network related alerts, but I seem to have some issue here. If you look at the above for the CPU, Memory, Storage, etc the tool is able to detect and show the numbers in “Green” and “Red” But there is nothing indicating for BGP, high temperature and other highlighted alert checkers. > > Am I doing something different here or my alert conditions have issues ? > > Regards > Kaustubh > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong > Sent: Friday, June 30, 2017 10:27 AM > To: Observium > Cc: Kunal Shah, CLSA; observium(a)observium.org<mailto:observium@observium.org> > Subject: Re: [Observium] Process Level Alerts in Observium > > Hi, > This isn't possible, and would actually be pretty complicated to do. > Not least because Observium doesn't yet collect per-process data! > Thanks, > Adam. > Sent from BlueMail<http://www.bluemail.me/r?b=9856> > On 30 Jun 2017, at 4:57 am, "Kaustubh Parthasarthy, CLSA" <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: > Hi Team, > > First, I would like to subscribe to the Observium mailing list. > > Second, i am using the Community Edition of Observium. Following are the details: > > > I have setup some alert checks to capture the high CPU alerts. I was also successful to capture some alert. PFA the results. > > I would like to know, if we can also show, which are the top 10 processes, which are running and as a result the utilization is going high. > > If I can get the output of the top 10 or top 5 processes on the same mail which is attached, this would assist the support teams to troubleshoot. > > Could you please assist on this as to how can I setup ? > > Thank you and Regards > Kaustubh > > The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. > These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. > CLSA is ISO14001 certified and committed to reducing environmental impact. > > ________________________________ > > observium mailing list > observium(a)observium.org<mailto:observium@observium.org> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. > These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. > CLSA is ISO14001 certified and committed to reducing environmental impact. > The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. > These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. > CLSA is ISO14001 certified and committed to reducing environmental impact. > The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. > These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. > CLSA is ISO14001 certified and committed to reducing environmental impact. > _______________________________________________ > observium mailing list > observium(a)observium.org<mailto:observium@observium.org> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. > These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. > CLSA is ISO14001 certified and committed to reducing environmental impact. > > The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. > These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. > CLSA is ISO14001 certified and committed to reducing environmental impact. > > ________________________________ > > observium mailing list > observium(a)observium.org<mailto:observium@observium.org> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. > These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. > CLSA is ISO14001 certified and committed to reducing environmental impact. >

3 2

Re: [Observium] Alert Checkers
by Kaustubh Parthasarthy, CLSA 30 Jun '17

30 Jun '17

Thank you for the Response Adam, Was also wondering, I have added some alert checks for Network related testing. [cid:image001.png@01D2F19D.1634BC40] If you see, the one highlighted are for Network related alerts, but I seem to have some issue here. If you look at the above for the CPU, Memory, Storage, etc the tool is able to detect and show the numbers in “Green” and “Red” But there is nothing indicating for BGP, high temperature and other highlighted alert checkers. Am I doing something different here or my alert conditions have issues ? Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Friday, June 30, 2017 10:27 AM To: Observium Cc: Kunal Shah, CLSA; observium(a)observium.org Subject: Re: [Observium] Process Level Alerts in Observium Hi, This isn't possible, and would actually be pretty complicated to do. Not least because Observium doesn't yet collect per-process data! Thanks, Adam. Sent from BlueMail<http://www.bluemail.me/r?b=9856> On 30 Jun 2017, at 4:57 am, "Kaustubh Parthasarthy, CLSA" <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: Hi Team, First, I would like to subscribe to the Observium mailing list. Second, i am using the Community Edition of Observium. Following are the details: [cid:image001.png@01D2F0C3.971FFA70] I have setup some alert checks to capture the high CPU alerts. I was also successful to capture some alert. PFA the results. I would like to know, if we can also show, which are the top 10 processes, which are running and as a result the utilization is going high. If I can get the output of the top 10 or top 5 processes on the same mail which is attached, this would assist the support teams to troubleshoot. Could you please assist on this as to how can I setup ? Thank you and Regards Kaustubh The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact. ________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact.

6 23

python-wrapper loop?
by John Klasa 30 Jun '17

30 Jun '17

Hi I've upgraded to this version: ./discovery.php -V Observium 17.5.8580 It seemed to be a great update but then MySQL died and I found this in the logs: [2017/06/29 15:05:20 +0200] poller-wrapper.py(29309): /opt/observium/poller-wrapper.py: URGENT: poller-wrapper not started because already running 34 processes, load average (5min) 37.17 And it kept increasing upton load over 70 where I killed all python, CROND and for some reason A LOT of ps processes. An example of processes below. 26133 ? D 0:00 ps -ww -o ppid,uid,args -p 23434 26331 ? R 0:00 ps -ww -o ppid,uid,args -p 2981 26354 ? R 0:00 ps -ww -o ppid,uid,args -p 10439 26355 ? R 0:00 ps -ww -o ppid,uid,args -p 11755 26356 ? R 0:00 ps -ww -o ppid,uid,args -p 5772 26357 ? R 0:00 ps -ww -o ppid,uid,args -p 2624 26360 ? R 0:00 ps -ww -o ppid,uid,args -p 19699 846 purify 20 0 342884 70760 1636 S 1.0 1.9 0:33.02 python 4424 purify 20 0 354536 11156 1632 S 1.0 0.3 1:27.40 python 4739 purify 20 0 356676 11832 1632 S 1.0 0.3 1:36.27 python 9718 purify 20 0 349728 10108 1636 S 1.0 0.3 1:03.00 python 20551 purify 20 0 361020 12280 1632 S 1.0 0.3 2:01.39 python 31260 purify 20 0 348144 76392 1636 S 1.0 2.0 0:56.62 python 402 purify 20 0 345244 33752 1636 S 0.7 0.9 0:43.67 python 1315 purify 20 0 343148 59904 1632 S 0.7 1.6 0:35.71 python 3219 purify 20 0 341844 47340 1632 S 0.7 1.3 0:28.92 python 3298 purify 20 0 353204 11376 1632 S 0.7 0.3 1:19.76 python Anyone know whats going on? I see this when I try to run the debug output Your PHP version is too old (5.4.16), | | functionality may be broken. Please update your PHP! | | Currently recommended version(s): 7.0.x or 5.6.x I guess I should upgrade PHP first. Regards -John

2 2

Process Level Alerts in Observium
by Kaustubh Parthasarthy, CLSA 30 Jun '17

30 Jun '17

Hi Team, First, I would like to subscribe to the Observium mailing list. Second, i am using the Community Edition of Observium. Following are the details: [cid:image001.png@01D2F0C3.971FFA70] I have setup some alert checks to capture the high CPU alerts. I was also successful to capture some alert. PFA the results. I would like to know, if we can also show, which are the top 10 processes, which are running and as a result the utilization is going high. If I can get the output of the top 10 or top 5 processes on the same mail which is attached, this would assist the support teams to troubleshoot. Could you please assist on this as to how can I setup ? Thank you and Regards Kaustubh The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact.

2 1

getting multiple random down events Device status changed to Down (ping)
by Ron Culler 29 Jun '17

29 Jun '17

Started getting multiple events "Device status changed to Down (ping) " over the last few weeks with no major increase in number of devices. Issue started on Cento 6.9 install with PHP 5.4, MySQL 5.1 (260 devices) HW - dual - quad core xeon CPUs, 24 GB Ram, RRD, MySQL, OS - with Observium install all on separate SSD drives Observium SVN install 17.6.8672 (rolling) Upgraded PHP and MySQL to PHP70 with opcode caching enabled, MySQL 5.7.18 - no change Spun up a fresh install Centos 7.3, PHP70 with opcode caching enabled, MySQL 5.7.18 (install per docs) HW - dual - quad core xeon CPUs, 24 GB Ram, RRD, MySQL, OS - with Observium install all on separate SSD drives Observium SVN install 17.6.8672 (rolling) $config['snmp']['max-rep'] = TRUE; Currently only 139 devices added To eliminate DNS related issues I have added the devices to /etc/hosts and forced resolution to use it first. Cron has /opt/observium/observium-wrapper poller -w 5 running every 5 min. The devices are not down and if I manually poll the device with a "Device status changed to Down (ping) " notice it responds normally and comes right back up. Was wondering if anyone has seen any behavior like this with this build or before. Also is there a way to skip ping during the poller run and just do snmp, and if so is it something that I can enable globally? Thanks in advance Ron Culler

1 0

wget - Read Error in Headers (Connection Reset by Peer)
by Muhammed Murat Tutar 28 Jun '17

28 Jun '17

I want to install Observium (observium.org) on my virtual Ubuntu Server but when I try to download files, I get a read error. wget http://www.observium.org/observium-community-latest.tar.gz --2017-06-28 10:53:16-- http://www.observium.org/observium-community-latest.tar.gz Resolving www.observium.org (www.observium.org)... 37.187.79.83 Connecting to www.observium.org (www.observium.org)|37.187.79.83|:80... connected. HTTP request sent, awaiting response... Read error (Connection reset by peer) in headers. Retrying. I couldn't find any solution. I use static IPv4 address and DNS servers. Ubuntu 16.04 LTS works on VCENTER Virtual Machine Version: 11 and Network Adapter is VM Network. Any solutions? Thanks.

3 2

Re: [Observium] SNMP Device without sysObjectId.0
by Oberreiter Andreas 28 Jun '17

28 Jun '17

I've noticed a typing error Snmpget -v 1 -c public portal.nadlinger.at .1.3.6.1.4.1.14848.2.1.1.1.0 -----Ursprüngliche Nachricht----- Von: observium [mailto:observium-bounces@observium.org] Im Auftrag von Oberreiter Andreas Gesendet: Donnerstag, 4. Mai 2017 10:53 An: Observium Public Support <observium(a)observium.org> Betreff: Re: [Observium] SNMP Device without sysObjectId.0 Snmpget -v 1 -c public portail.nadlinger.at .1.3.6.1.4.1.14848.2.1.1.1.0 Should answer SNMPv2-SMI::enterprises.14848.2.1.1.1.0 = STRING: "Version 1.62" -----Ursprüngliche Nachricht----- Von: observium [mailto:observium-bounces@observium.org] Im Auftrag von Mike Stupalov Gesendet: Donnerstag, 4. Mai 2017 10:00 An: Observium Public Support <observium(a)observium.org> Betreff: Re: [Observium] SNMP Device without sysObjectId.0 Hi, can you privide temporary snmp access to this device? I will do this faster :) Oberreiter Andreas wrote: > I've added print_message lines to see if my code is called. > > When I try another device e.g. a zyxel device I can see my code is executed. > > But when I try the device in question the discovery code isn't executed. > > > -----Ursprüngliche Nachricht----- > Von: observium [mailto:observium-bounces@observium.org] Im Auftrag von > Mike Stupalov > Gesendet: Mittwoch, 3. Mai 2017 17:21 > An: Observium Public Support <observium(a)observium.org> > Betreff: Re: [Observium] SNMP Device without sysObjectId.0 > > This device also not have sysDescr.0 too? > > You also should add os detecting file (from > $config['os'][$os]['discovery_os']): > includes/discovery/os/messpc.inc.php > > with content like this: > > <?php > > if (!$os) > { > // SNMPv2-SMI::enterprises.14848.2.1.1.1.0 = STRING: "Version 1.62" > $data = snmp_get($device, '.1.3.6.1.4.1.14848.2.1.1.1.0', '-Osqnv'); > if (strlen($data)) > { > $os = 'messpc'; > } > } > > // EOF > > And better os name: messpc-env > > Oberreiter Andreas wrote: >> Hi, >> >> The Device is from http://www.messpc.de >> >> I've tried to add the following lines to >> includes/definitions/os.inc.php // MessPC $os = "messpc"; >> $config['os'][$os]['text'] = "MessPC Etherbox"; >> $config['os'][$os]['vendor'] = "MessPC"; >> $config['os'][$os]['type'] = "environment"; >> $config['os'][$os]['discovery_os'] = "messpc"; >> $config['os'][$os]['snmpable'][] = ".1.3.6.1.4.1.14848.2.1.1.1.0"; >> $config['os'][$os]['mibs'][] = "ETHERBOX-MIB"; >> >> I've put the ETHERBIX-MIB file in mibs/messpc/ETHERBOX-MIB >> >> and restarted the Webserver. Then I tried to add the device again no change. >> >> I can do a snmpwalk -v 1 -c public IP .1.3.6.1.4.1.14848 >> >> The result of >> snmpget -v 1 -c public 172.30.7.2 .1.3.6.1.4.1.14848.2.1.1.1.0 is >> SNMPv2-SMI::enterprises.14848.2.1.1.1.0 = STRING: "Version 1.62" >> >> What did I wrong? >> I'm on the latest commercial Version 17.4.8476 >> >> Kind Regards >> Andreas >> >> -----Ursprüngliche Nachricht----- >> Von: observium [mailto:observium-bounces@observium.org] Im Auftrag >> von Mike Stupalov >> Gesendet: Freitag, 28. April 2017 15:02 >> An: Observium Public Support <observium(a)observium.org> >> Betreff: Re: [Observium] SNMP Device without sysObjectId.0 >> >> Hi, >> >> seems as another china/indian device? ;) >> >> For valid device adding required one of this OIDs to be exist on device: >> sysObjectID.0 or sysUpTime.0 >> >> If both OIDs not exist for device, use 'snmpable' os param. >> See example for os 'hikvision-cam': >> >> $os = "hikvision-cam"; >> $config['os'][$os]['text'] = "Hikvision Network Camera"; >> $config['os'][$os]['type'] = "video"; >> $config['os'][$os]['vendor'] = "Hikvision"; >> $config['os'][$os]['discovery_os'] = "hikvision"; >> $config['os'][$os]['snmpable'][] = >> ".1.3.6.1.4.1.39165.1.1.0"; // This device complete not have >> sysObjectID.0 or sysUpTime.0 >> $config['os'][$os]['mibs'][] = "HIK-DEVICE-MIB"; >> >> >> Oberreiter Andreas wrote: >>> Hi All, >>> >>> I have a device which doesn't provide the SysObjectId.0. >>> It start right away with the Enterprise entry's: >>> SNMPv2-SMI::enterprises.14848.2.1.1.1.0 = STRING: "Version 1.62" >>> >>> Is there a way to add such an device? The values I'm interested in are in the enterprise part of the mib and could be easily retreated by a custom OID. >>> >>> But without an SysObjectId it seems impossible to add a device. >>> >>> Any Suggestions? >>> >>> Kind regards >>> Andras >>> >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > -- > Mike Stupalov > Observium Limited, http://observium.org > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 3

rrdtoolx
by austin wonderly 28 Jun '17

28 Jun '17

Hello, What would be the correct way to extract rrd data for a certain period of time (last 7 days for example). I'm trying to extract data for the following graph http://imgur.com/a/Gw9y2, although when I open up the data in excel, I'm not able to get anything of use. I used this command to produce an RRD export first: /opt/observium/scripts/rrdtoolx.py addrra netstats-udp.rrd /tmp/testrrd after which I used: rrdtool dump /tmp/testrrd > /tmp/rrd.xml to get the file into an xml format, and finally I imported the xml into excel. I'm trying to put together a list of time stamps and their appropriate data points, so for example: time1 : 22 errors time2: 10 errors time3: 30 errors .... Would it even be possible to extract this kind of data from the RRD files? Thanks for your help, Austin

2 3

MSSQL database for Professional edition
by Jan Horacek 27 Jun '17

27 Jun '17

Good evening gentlemen, I have an question about possibility run Observium PE on MSSQL database instead of MySQL/Maria DB. we are going to implement observium PE to live production and our developers are wondering if any official MSSQL plugin exists or not. Thanks for reply best Regards Jan

2 2

WAN link monitoring
by Luke Johnson 27 Jun '17

27 Jun '17

Hi, I have looked for previous questions regarding this, but haven't been able to find one, so I apologise if it has been asked/answered before. We have several paths to a remote router that we monitored via it's loopback IP address. Observium does a great job at alerting us when that router is offline, but, I'm unable to find a way to be alerted when we have a single WAN link failure. During a WAN link failure we can still access the remote router via a redundant path, however, we are often not aware that the primary is offline since Observium can still reach the remote router. Apart from checking if utilisation on the link drops below a certain level, is there any other way that I can perform a check and alert on the above scenario? Thanks, Luke

3 2

Question on geolocation dropdown menu
by Ed Iwanski 23 Jun '17

23 Jun '17

We have a largish installation and have locations / devices in every state in the US and every province/territory in Canada. We have been adding all of these to Observium and allowing them to be geolocated based on SNMP location strings (works perfectly, thank you) but found that we are running into an issue where the scrollbar is too tall for many average browser screens. There does not seem to be a way to scroll here so there are some locations that will just not be accessible or seen on this dropdown menu. Is there a way to tune or change this? Also any possibility that the states/provinces/territories can be alphabetically listed on the dropdown menu instead of in seemingly order they were added or random? Screenshot attached, there are more locations at the bottom but that was all I could fit on the screen for the capture. Thanks for any input.

2 2

snmpv3 context support
by Tomasz.Kwiecien＠nordea.com 21 Jun '17

21 Jun '17

Hi, Are you planning to add snmpv3 context support to observium? I can see that in file includes/snmp.inc.php: switch ($device['snmp_version']) { case 'v3': $cmd = ' -v3 -l ' . escapeshellarg($device['snmp_authlevel']); /* NOTE. * For proper work of 'vlan-' context on cisco, it is necessary to add 'match prefix' in snmp-server config --mike * example: snmp-server group MONITOR v3 auth match prefix access SNMP-MONITOR */ $cmd .= ($vlan) ? ' -n "vlan-' . $vlan . '"' : ' -n ""'; // Some devices, like HP, always require option '-n' Observium adds context vlan-$vlan for cisco switches if $vlan variable is defined. Would be great to have option to add device with context during new device definition (like option to choose transport protocol, port timout etc). Best regards, Tomasz Kwiecień

3 2

Change name of monitored device
by Jason Ross 21 Jun '17

21 Jun '17

Hi, I can't seem to locate anything in the doco that helps, happy to refer to that if it exists. Failing that, I have a device name that I'd like to change the name of to reflect a configuration change. Is it possibly to modify the name of the firewall in this case without dropping all of the captured stats etc? Jason

2 2

Observium Pro Purchase Question
by TLee 20 Jun '17

20 Jun '17

Good afternoon - We have been playing with the community version of OB in a dev environment and we want to purchase OB Pro edition. Does anyone know of a vendor/ retailer that i can purchase through?! The purchase is no problem, but i can't just send a screenshot to my procurement department from my account that says 'Observium Pro - Enter card info - Pay Now'?! Thanks! Sent from ProtonMail Mobile

4 5

Alerts/notifications stopped randomly?
by Simon Mousey Smith 20 Jun '17

20 Jun '17

Hi All Im trying to see if anybody else is having this issue Our Observium has randomly stopped sending alerts Currently using email/pushover/slack/hipchat and I don’t seem to get any of them!? Running test_alert -a 1 works without any issues The alert_tests range from device down to storage low regards Simon - Hestor Ltd

6 19

SVN version - checksum errors
by ICT Veenlanden College 20 Jun '17

20 Jun '17

Hi all, I want to install the Subscription version, but i keep getting Checksum errors. e.g.: svn: E200014: Checksum mismatch for '/opt/observium/html/images/os/barracuda_2x.png': expected: 2a858b050beda750f9cb394d5795f391 actual: aa1874be2a3fc37f2cd1abb57a5d4b1d Anyone know how to fix this? Running: Ubuntu 14.04 Greets, Jorrit ________________________________ Deze e-mail kan vertrouwelijk zijn en is uitsluitend bestemd voor geadresseerde. Heeft u dit bericht abusievelijk ontvangen dan verzoeken wij u het door te sturen naar info(a)hetvlc.nl en vervolgens te verwijderen. Het is niet toegestaan de informatie in de e-mail zonder toestemming te gebruiken of te verspreiden. De afzender is niet aansprakelijk wanneer informatie in deze e-mail niet volledig of niet tijdig overkomt. Voor informatie over het VeenLanden College raadpleegt u: www.veenlandencollege.nl

4 6

Monitor energy usage on APC PDU's
by Fredrik Winäs 19 Jun '17

19 Jun '17

Hi We have some metered APC PDU's that I want to monitor the energy usage per outlet on. I have the OID but I would have to make a custom OID per outlet. I get Current, Power and Voltage today in Observium, but not the energy. .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11 A user resettable energy meter measuring Rack PDU load energy consumption in tenths of kilowatt-hours Is there a way to add a custom OID that collects an index? .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.1 .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.2 .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.3 .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.4...14...24... Putput from one of the PDU's, this is 2 PDU's linked by a serial cable, only 5 cables attached now, but 2x24 outlets. OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.1 Value: 908 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.2 Value: 464 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.3 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.4 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.5 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.6 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.7 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.8 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.9 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.10 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.11 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.12 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.13 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.14 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.15 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.16 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.17 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.18 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.19 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.20 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.21 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.22 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.23 Value: 435 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.24 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.25 Value: 904 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.26 Value: 479 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.27 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.28 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.29 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.30 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.31 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.32 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.33 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.34 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.35 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.36 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.37 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.38 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.39 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.40 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.41 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.42 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.43 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.44 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.45 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.46 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.47 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.48 Value: 0 Type: Integer Med Vänlig Hälsning Fredrik Winäs tel +46 31 762 02 43 fredrik.winas(a)cgit.se<mailto:fredrik.winas@cgit.se> www.cgit.se<http://www.cgit.se/> CGit AB Taljegårdsgatan 11C SE-431 53 Mölndal [cid:image001.png@01D2E8EA.EC76B6C0] [cid:image002.png@01D2E8EA.EC76B6C0]

2 1

how to get MAX /95th in command line
by Denis Granato 19 Jun '17

19 Jun '17

Good afternoon When I have to make some reports of my wan links, I enter one by one, select the date that I want and get the MAX and 95th values. Can I do this with scripts at command line? tks in advance

2 1

New versions for CE
by Nurbek Suleimanov 18 Jun '17

18 Jun '17

Hi Dear Observium team, Please tell me about upgrade for new version Observium CE. when update date? Thanks. Best regards, Nurbek Suleimanov Leading Engineer of the Internet Service JSC Transtelecom, KZ, Astana, Konaeva 10 Work phone: +7 7172 610 912 Mob. phone: +7 701 66 22 33 4 skype: nfastik

1 0

Hardisk Space not tally with Oberservium
by Idzma Zakaria 18 Jun '17

18 Jun '17

Hi , Im monitoring one of our equipment running on windows 7 .As what I saw is the storage space is not tally as what it shown in the windows 7 hardisk space. Below is the details On the PC Windows 7 shown But in Observium Anything that I need to tweak of? -- Kind regards, Idzma Zakaria, ICT Senior Executive ---------------------------------------------------------------------------------------------------------- Australian International School Malaysia (AISM) No.22 Jalan Anggerik, The Mines Resort City, 43300 Seri Kembangan, Selangor, Malaysia. *T:* +60 3 8949 5000 *F*: +60 3 8949 5100 *E*: idzmaz(a)aism.edu.my *W*: http://www.aism.edu.my/ *Direct Line*: ---------------------------------------------------------------------------------------------------------- <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

2 2

ERR_EMPTY_RESPONSE - bug?
by Давыдов Денис 17 Jun '17

17 Jun '17

Hello everybody! We use Observium Subscription Edition Version: Observium 17.5.8580 (stable) SVN info: [root@tnobspapp01 observium]# svn info Path: . Working Copy Root Path: /opt/observium URL: http://svn.observium.org/svn/observium/branches/stable Repository Root: http://svn.observium.org/svn Repository UUID: 61d68cd4-352d-0410-923a-c4978735b2b8 Revision: 8662 Node Kind: directory Schedule: normal Last Changed Author: adama Last Changed Rev: 8580 Last Changed Date: 2017-05-28 15:05:18 +0300 (Sun, 28 May 2017) OS: [root@tnobspapp01 ~]# cat /etc/redhat-release CentOS Linux release 7.3.1611 (Core) Kernel: [root@tnobspapp01 ~]# uname -a Linux tnobspapp01 3.10.0-514.16.1.el7.x86_64 #1 SMP Wed Apr 12 15:04:24 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux Selinux: [root@tnobspapp01 observium]# getenforce Permissive PHP version: [root@tnobspapp01 ~]# php -v PHP 7.0.19 (cli) (built: May 12 2017 21:01:27) ( NTS ) Copyright (c) 1997-2017 The PHP Group Zend Engine v3.0.0, Copyright (c) 1998-2017 Zend Technologies with Zend OPcache v7.0.19, Copyright (c) 1999-2017, by Zend Technologies Apache version: [root@tnobspapp01 ~]# httpd -v Server version: Apache/2.4.6 (CentOS) Server built: Apr 12 2017 21:03:28 Problem: In browser (Chrome, IE, Firefox): Devices -> All devices -> Choose any device -> Properties -> choose MIBs or Modules = This page isn't working ERR_EMPTY_RESPONSE In Apache access log: 172.XX.XX.XX - - [15/Jun/2017:10:43:45 +0300] "GET /device/device=530/tab=edit/section=modules/ HTTP/1.1" 200 134939 "-" "Mozilla/5.0 (Windows NT 6.3; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/58.0.3029.110 Safari/537.36" 172.XX.XX.XX - - [15/Jun/2017:10:46:22 +0300] "GET /device/device=530/tab=edit/section=mibs/ HTTP/1.1" 200 157018 "-" "Mozilla/5.0 (Windows NT 6.3; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/58.0.3029.110 Safari/537.36" What is it? Bug? Please help me. Best regards, Davydov Denis

2 1

Telegram Alerts no longer working after Update
by Gumilar Siegfried 16 Jun '17

16 Jun '17

Hello! I have updated Observium to the latest subscription edition (17.6.8663) today. Since the update our telegram alerts are not working properly. We only get a single zero as text: Before: ALERT : Port down Device: xyz Entity: Port 13 Description: xyz Device Uptime: 1 year, 118 days, 9h 28s More information: http://observium.tkswf.at/device/device=8/tab=alert/alert_entry=16267/ After: 0

1 0

email alerts not working after update to r8661
by Chris Smith 15 Jun '17

15 Jun '17

After we update Observium subscription version from r8637 to r8661 emailed alerts are no longer working. Alerts are still logged in the alert log, however the "Notified" status says "No" and no emails are generated. Used the test_alert.php util and at the bottom it ends with an error about a missing include. Output: observium]$ sudo -u apache ./test_alert.php -a 35069 -dd DEBUG! Load class 'Console_Color2' from '/u1/observium/libs/pear/Console/Color2.php': OK SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema';] ROWS[1] SQL RUNTIME[0.00008607s] SQL[SELECT @@SESSION.sql_mode;] ROWS[1] SQL RUNTIME[0.00008798s] SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'current_rev';] ROWS[1] SQL RUNTIME[0.00027394s] SQL[SELECT * FROM `config`] ROWS[0] SQL RUNTIME[0.00005698s] Load class 'Net_IPv6' from '/u1/observium/libs/pear/Net/IPv6.php': OK CACHE DISABLED. Disabled in config. Observium 17.6.8661 Test Alert Notification CMD[/u1/observium/scripts/distro] Wrong process status! Issue in proc_get_status(), see: https://bugs.php.net/bug.php?id=69014 CMD EXITCODE[0] CMD RUNTIME[0.0379s] STDOUT[ Linux|2.6.32-642.13.1.el6.x86_64|amd64|CentOS|6.8|none ] CMD[/usr/bin/env python --version 2>&1] CMD EXITCODE[0] CMD RUNTIME[0.0213s] STDOUT[ Python 2.6.6 ] SQL[SELECT version();] ROWS[1] SQL RUNTIME[0.00012589s] CMD[/usr/bin/snmpget --version 2>&1] CMD EXITCODE[0] CMD RUNTIME[0.0038s] STDOUT[ NET-SNMP version: 5.5 ] CMD[/usr/bin/rrdtool --version | head -n1] CMD EXITCODE[0] CMD RUNTIME[0.0046s] STDOUT[ RRDtool 1.3.8 Copyright 1997-2009 by Tobias Oetiker <tobi(a)oetiker.ch> ] CMD[/usr/bin/env apache2 -v | awk '/Server version:/ {print $3}'] CMD EXITCODE[0] CMD RUNTIME[0.0089s] STDOUT[ ] CMD[/usr/sbin/httpd -v | awk '/Server version:/ {print $3}'] CMD EXITCODE[0] CMD RUNTIME[0.0409s] STDOUT[ Apache/2.2.15 ] CMD[date "+%:z"] CMD EXITCODE[0] CMD RUNTIME[0.0127s] CMD EXITDELAY[10ms] STDOUT[ -04:00 ] SQL[SELECT TIMEDIFF(NOW(), UTC_TIMESTAMP);] ROWS[1] SQL RUNTIME[0.00018001s] SQL[SELECT @@SESSION.sql_mode;] ROWS[1] SQL RUNTIME[0.00011206s] SQL[SHOW VARIABLES LIKE 'character_set_connection'] ROWS[1] SQL RUNTIME[0.00039697s] ##### Software versions ##### o OS Linux 2.6.32-642.13.1.el6.x86_64 [amd64] (CentOS 6.8) o Apache 2.2.15 o PHP 5.6.30 o Python 2.6.6 o MySQL 5.1.73 (extension: mysqli 5.0.11-dev) o SNMP NET-SNMP 5.5 o RRDtool 1.3.8 ##### Memory Limit ##### o PHP 256B ##### MySQL mode ##### o MySQL ##### Charset info ##### o PHP UTF-8 o MySQL utf8 ##### Timezones info ##### o Date Wednesday, 14-Jun-17 19:37:27 EDT o PHP -04:00 o MySQL -04:00 SQL[SELECT * FROM `alert_tests` WHERE 1] ROWS[18] SQL RUNTIME[0.00012898s] Cached 18 alert rules. SQL[SELECT * FROM `alert_assoc`] ROWS[37] SQL RUNTIME[0.00009298s] SQL[SELECT * FROM `alert_table` WHERE `alert_table_id` = '35069'] ROWS[1] SQL RUNTIME[0.00028110s] SQL[SELECT * FROM `devices` WHERE `device_id` = '84'] ROWS[1] SQL RUNTIME[0.00022697s] SQL[SELECT * FROM `device_graphs` WHERE `device_id` = '84'] ROWS[21] SQL RUNTIME[0.00006294s] SQL[SELECT * FROM `ports` WHERE `ports`.`port_id` = '2966'] ROWS[1] SQL RUNTIME[0.00027490s] > $graphtype /u1/observium/html/includes/graphs/graph.inc.php:33 array( [0] => string(9) "port_bits" [type] => string(4) "port" [1] => string(4) "port" [subtype] => string(4) "bits" [2] => string(4) "bits" ) SQL[SELECT * FROM `ports` WHERE `ports`.`port_id` = '2966'] ROWS[1] SQL RUNTIME[0.00011206s] Load class 'Net_IPv4' from '/u1/observium/libs/pear/Net/IPv4.php': OK RRD PIPE OPEN[TRUE] RRD PIPE CLOSE[TRUE] RRD PIPE STDOUT[ OK u:0.03 s:0.00 r:0.11 ] RRD CMD[graph /tmp/mTymlIwqPU80Uriu.png <edited_out_giant_rrd_command.....>] RRD RUNTIME[0.1122s] RRD STDOUT[481x204] RRD_STATUS[TRUE] SQL[SELECT `attrib_value` FROM `entity_attribs` WHERE `entity_type` = 'device' AND `entity_id` = '84' AND `attrib_type` = 'disable_notify'] ROWS[0] SQL RUNTIME[0.00063896s] SQL[SELECT * FROM `alert_contacts` WHERE `contact_disabled` = 0 AND `contact_id` IN (SELECT `contact_id` FROM `alert_contacts_assoc` WHERE `aca_type` = 'alert' AND `alert_checker_id` = '19');] ROWS[0] SQL RUNTIME[0.00005817s] o Missing include /u1/observium/includes/alerting/.inc.php

2 3

Synology UPS-MIB
by Torstein Eide 15 Jun '17

15 Jun '17

Hi The Synology UPS-MIB in \observium\mibs\synology, does not show up in [image: Innebygd bilde 1] how can i add it? -- Torstein Eide Torsteine(a)gmail.com

4 5

Possible bug with BGP IPv6 sessions state alert checker
by Youssef BENGELLOUN - ZAHR 15 Jun '17

15 Jun '17

7 37

Netscaler vserver missing info on 8576
by Jay Christopher 14 Jun '17

14 Jun '17

Hey, I've noticed that vservers on Netscalers are missing the "Type" (load balancing, content switching) and the services under the vserver don't show up. I attached two screenshots of the same vsever running on different versions. Noticed that one shows the services and the other one doesn't. -- Jay

2 3

Unable to pulled data for Processor, Memory and storage.
by Idzma Zakaria 12 Jun '17

12 Jun '17

Hi , Having problem after updating to Observium 17.5.8580 . All of my servers unable to pulled Processor ,memory and storage data. Its shown 0B ( 100%) as below picture.I have tested pulled using wmic it able to produce data and also from the ./poller.php but in the observium it wont show any data. Any advice is much appreciated. Debug from poller : +---------------------------------------+--------------------+-------+-------+--------+-------+--------+ | Label | Type | Index | Total | Used | Free | Perc | +---------------------------------------+--------------------+-------+-------+--------+-------+--------+ | C:\\ Label:OS Serial Number c05b38c | host-resources-mib | 1 | 278GB | 70.7GB | 207GB | 25.39% | +---------------------------------------+--------------------+-------+-------+--------+-------+--------+ -- Kind regards, Idzma Zakaria, ICT Senior Executive ---------------------------------------------------------------------------------------------------------- Australian International School Malaysia (AISM) No.22 Jalan Anggerik, The Mines Resort City, 43300 Seri Kembangan, Selangor, Malaysia. *T:* +60 3 8949 5000 *F*: +60 3 8949 5100 *E*: idzmaz(a)aism.edu.my *W*: http://www.aism.edu.my/ *Direct Line*: ---------------------------------------------------------------------------------------------------------- <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

5 17

Big Unit
by Canto José 09 Jun '17

09 Jun '17

Hello, I tried several times to add the new Cisco CMTS CBR8, this units has 2000 to 4000 services depending on the line cards, but it always brings Observium to crash. Once the systems hangs completely the other time the Database crashed. I tried it on the pro version and also an the CE version. Is there a possibility to avoid the system crash, adding such a device. Thanks in advanced Best regards José

2 3

Cannot redeclare snmpget error
by John Simino 08 Jun '17

08 Jun '17

Just upgrading to latest SVN today and get this error. SVN 8638. Something I’m doing wrong to update the database? [root@observium ~]# /opt/observium/discovery.php -h none PHP Fatal error: Cannot redeclare snmpget() in /opt/observium/includes/snmp.inc.php on line 1253 js

2 1

Unable to parse header `DSName' rrdtool
by Sam Hernandez-gill 08 Jun '17

08 Jun '17

So if I delete the rrd files in question and let it recreate them and still get the same unable to parse header after they are created again would that rule out the rrd files being corrupted? Anything I can retrieve to help verify if this a bug in the stable branch or system? Problem is limited to Netscaler TCP graphs and Graphs -> Netscaler SSL graphs netscaler-stats-tcp.rrd netscaler-SslStats.rrd Thanks, Sam ---------------------------- This message (including any attachments) contains confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient of this e-mail (even if the e-mail address above is yours), (i) you may not use, copy or retransmit it, (ii) please delete this message and (iii) please notify the sender immediately. Any disclosure, copying, or distribution of this message or the taking of any action based on it, is strictly prohibited. ---------------------------- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Friday, March 03, 2017 11:57 AM To: observium(a)observium.org Subject: Re: [Observium] Unable to parse header `DSName' rrdtool This is likely because your rrd local files are corrupted. adam. On 03/03/2017 16:52:05, Sam Hernandez-gill <sam.hernandez-gill(a)qvc.com<mailto:sam.hernandez-gill@qvc.com>> wrote: I have a few different rrdtool graphs that are outputting “RRDTool Output: ERROR: rrdc_fetch: Unable to parse header `DSName'” So far I’ve only noticed it on specific Citrix Netscaler graphs, the Netscaler SSL ones nsSslHandshakes, nsSslSessions, etc and TCP Connections and TCP Packets for the netscalers are all in the same state with Unable to parse header `DSName'. [cid:image001.png@01D29412.6D368F20] Sadly I didn’t notice when, I did recently upgrade to revision 8417, however these aren’t graphs I frequently look at. Anybody else with netscalers in their environment at the same revision? Thanks, Sam ---------------------------- This message (including any attachments) contains confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient of this e-mail (even if the e-mail address above is yours), (i) you may not use, copy or retransmit it, (ii) please delete this message and (iii) please notify the sender immediately. Any disclosure, copying, or distribution of this message or the taking of any action based on it, is strictly prohibited. ----------------------------

2 8

Down Port Alert Filtering
by Robert Williams 08 Jun '17

08 Jun '17

Hi, I'd like to filter out ports which show in the summary table by removing those which are of the type 'Customer' Currently it looks like this: [cid:image001.png@01D2DF86.29E80950] I would like to ignore Customer type ports (which have a description starting with "Cust:") as it is very common for a number of these to be down at any given time in our use case. So it's not worth of showing up as a Red condition on the main page. Is this something that is currently configurable (like ignoring entire devices, can I also ignore a 'type' of port?) or does something not currently exist for this? Thanks in advance, Robert Williams Custodian Data Centres https://www.CustodianDC.com

3 4

BGP all session : page load >20seconds with 22k sessions
by Johann Mallet 08 Jun '17

08 Jun '17

Hello, I monitored very big network with great tool is Observium. But I have issue with "BGP All session" page : When I navigate on this page, the load time is >20 seconds. I have not the issue with "All ports" page. We have >22k BGP sessions and >1300 Remote ASN. The generation time displayed in bottom righ is between 1 and 2 sec. After some time, I think understand the problem : It's not generation issue, but navigator issue with javascript. The left pan load <0.5sec with first BGP list. But the right pan with search form load >15 seconds. The navigator freeze or greatly slowed down (with "warning : one onglet slowed navigator"). I have test with Firefox and Chrome : same result. I think the big list of "Remote AS" and "Peer address" place JS engine in crazy mode. Do you have option in configuration mode to disable the list of Remote AS/Peer address and only use free text? Or not charge all list and use JS to load list when an letter/number is provided? For the moment, we can't not really use this page :( Thank! Johann

5 10

Scheduled maintenance - use interface circuits
by Christopher Pole 08 Jun '17

08 Jun '17

Is it possible to use port_descr_circuit directly for scheduled maintenance? At the moment I have to create a port group consisting of of the two circuit interfaces using port_descr_circuit to schedule circuit maintenance. This feels a bit clunky due to the extra step and results in dozens of port groups containing two interfaces.

1 0

Failed opening required 'Mail/mimePart.php'
by Simon Mousey Smith 07 Jun '17

07 Jun '17

Hi All Erm help please!? Notifications have been working fine for days then suddenly stopped, and I hate to say it I can’t pin point when i stopped getting them :( I have found those when running alert_test.php the following errors PHP Fatal error: require_once(): Failed opening required 'Mail/mimePart.php' (include_path='/opt/observium/libs:.:/usr/share/php') in /opt/observium/libs/pear/Mail/mime.php on line 63 Fatal error: require_once(): Failed opening required 'Mail/mimePart.php' (include_path='/opt/observium/libs:.:/usr/share/php') in /opt/observium/libs/pear/Mail/mime.php on line 63 Any ideas? I have not changed anything and not even updated the os recently either? Regards Simon

3 2

Email Alerts Broken? Failed opening required 'Mail/mimePart.php'
by Mailing Lists 07 Jun '17

07 Jun '17

Hi All, We just discovered out email alerts have not been sending, and when checking the test_alert.php we see the following error: PHP Fatal error: require_once(): Failed opening required 'Mail/mimePart.php' (include_path='/opt/observium/libs:.:/usr/share/php') in /opt/observium/libs/pear/Mail/mime.php on line 63 Changing line 63 in that file to 'pear/Mail/mimePart.php' fixes the issue and the test alerts works again. Has something changed in a recent Observium release that would have broken this include? Anyone else seeing this? Just upgraded to 17.6.8631 and the issue persists. Many Thanks, Tim C

2 2

Re: [Observium] rrd blank graphs
by Patricio Hernan Besteiro 06 Jun '17

06 Jun '17

just fixed the issue, thanks a lot for your help! Kind regards, Patricio Hernan Besteiro From: observium-request(a)observium.org To: observium(a)observium.org Date: 06/06/2017 08:00 Subject: observium Digest, Vol 83, Issue 6 Sent by: "observium" <observium-bounces(a)observium.org> Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: Unable to Add Device from Web UI (Richard Wigzell) 2. Re: Unable to Add Device from Web UI (Markus Klock) 3. When next CE version? (Silvio del Val Hinojal) 4. Re: When next CE version? (Adam Armstrong) 5. Re: Unable to Add Device from Web UI (Richard Wigzell) 6. Re: Unable to Add Device from Web UI (Mike Stupalov) 7. Re: Unable to Add Device from Web UI (Richard Wigzell) 8. Re: Unable to Add Device from Web UI (Adam Armstrong) 9. Re: Unable to Add Device from Web UI (Richard Wigzell) 10. Re: Unable to Add Device from Web UI (Adam Armstrong) 11. Re: Unable to Add Device from Web UI (Richard Wigzell) 12. rrd blank graphs (Patricio Hernan Besteiro) 13. Re: rrd blank graphs (Adam Armstrong) 14. Re: Unable to Add Device from Web UI (Mike Stupalov) 15. Re: Unable to Add Device from Web UI (Adam Armstrong) 16. Re: Unable to pulled data for Processor, Memory and storage. (Idzma Zakaria) 17. Re: Unable to pulled data for Processor, Memory and storage. (Mike Stupalov) 18. Re: Unable to pulled data for Processor, Memory and storage. (Idzma Zakaria) 19. Re: Unable to pulled data for Processor, Memory and storage. (Adam Armstrong) 20. Re: BGP all session : page load >20seconds with 22k sessions (Johann Mallet) 21. Re: BGP all session : page load >20seconds with 22k sessions (Johann Mallet) 22. Re: BGP all session : page load >20seconds with 22k sessions (Mike Stupalov) 23. Re: Unable to pulled data for Processor, Memory and storage. (Mike Stupalov) ---------------------------------------------------------------------- Message: 1 Date: Mon, 5 Jun 2017 11:41:50 +0000 From: Richard Wigzell <richard.wigzell(a)it.ox.ac.uk> To: Observium <observium(a)observium.org> Subject: Re: [Observium] Unable to Add Device from Web UI Message-ID: <570E8F2DF73D4B4A91278BC443AD5D361DF86DCE(a)MBX05.ad.oak.ox.ac.uk> Content-Type: text/plain; charset="utf-8" Hello, I have updated to 17.6.8616 and have the same results. Here is a screenshot as requested. [cid:image001.png@01D2DDF9.1998B880] Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/> -----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Mike Stupalov Sent: 03 June 2017 14:01 To: Observium <observium(a)observium.org> Subject: Re: [Observium] Unable to Add Device from Web UI Hi, please update to latest rolling (trunk) and check again. Please show add device page screenshot (right after try to add), if you still not able add device from wui. Richard Wigzell wrote: > > Hello, hope someone can help. > > > > We are running 17.5.8587 rolling and we are unable to add a device > using the WebUI, we get ?Could not reach ServerName with given SNMP > parameters using v2c.? > > > > However adding a device from the command line with add_device.php and > the same parameters works fine. Any suggestions welcome. > > > > Regards > > > > > > > > cid:image001.jpg@01CE9215.D39244B0 <https://www.it.ox.ac.uk/> > > > > *Richard Wigzell* > Networks, Security and Server Specialist IT Services | University of > Oxford > > 13 Banbury Road, Oxford OX2 6NN > > > *T:* 01865 616282 > www.it.ox.ac.uk<http://www.it.ox.ac.uk> <https://www.it.ox.ac.uk/> > > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org<mailto:observium@observium.org> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Unable to Add Device from Web UI
by Richard Wigzell 05 Jun '17

05 Jun '17

Hello, hope someone can help. We are running 17.5.8587 rolling and we are unable to add a device using the WebUI, we get "Could not reach ServerName with given SNMP parameters using v2c." However adding a device from the command line with add_device.php and the same parameters works fine. Any suggestions welcome. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

5 12

rrd blank graphs
by Patricio Hernan Besteiro 05 Jun '17

05 Jun '17

Good day for all, I installed observium in red hat 6 and all seems good but graphs are showing no data, rrdtool is working, and and polling script is grabbing data from clients. - rrd directory permissions are 755 , owned by apache - tried to recompile rrdtool - crontab entries are working - recreated db Can you guys help me to troubleshoot? thanks in advance Kind regards, Patricio Hernan Besteiro

2 1

When next CE version?
by Silvio del Val Hinojal 05 Jun '17

05 Jun '17

Hello, When do you think the next Observium CE version will be released ? I know it will be "whenever you think it is ready"...just to know, I would like to test it because we are using current CE version and we would like to see last changes and think about buying it :-) Regards, Silvio [cid:image001.png@01D03B1C.E8E96F80]<http://www.pandasecurity.com/spain/> Silvio del Val Systems Engineer - Panda Security +34 944 343 728 silvio.delval(a)pandasecurity.com<mailto:silvio.delval@pandasecurity.com> pandasecurity.com<http://www.pandasecurity.com/> This e-mail contains confidential information owned by Panda Security. Any such copy, or use, or distribution or disclosure of its contents is strictly forbidden. Please notify us immediately at our phone number (+34 94 425 11 00) if you receive this e-mail and are not its consignee, and then delete this message from your system without copying it, distributing it, or disclosing its contents P Before printing this message, please make sure it is really necessary

2 1

Basic Alerting Question
by TLee 05 Jun '17

05 Jun '17

I apologize for the 'basicness' of this question - i am very new to the community, but can you please confirm that alerting can only be configured in the suscription/ professional edition? Thanks! TL Sent from ProtonMail Mobile

2 1

reoccurring maintenance window
by Richard Wigzell 02 Jun '17

02 Jun '17

Hello, Is it possible to schedule a reoccurring maintenance window? Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

Alert E-Mail Output
by Shon Elliott 02 Jun '17

02 Jun '17

Hello, Is it possible to adjust the alert e-mail output with which information it contains as well as who it's from? Is it also possible to use a text only shorter format for sending to recipients via services like SMS? Apologies if this has been asked for before. The ML archives aren't working/available and I didn't see this in the Documentation or FAQ anywhere. Kind Regards, Shon Elliott, KK6TOO

2 1

Automatically deleting devices
by Lyndon Labuschagne 01 Jun '17

01 Jun '17

Hi Is there a way of automatically deleting devices after a preset number of days of that device being down Regards Lyndon

1 0

Comment field in alert detail?
by Johann Mallet 01 Jun '17

01 Jun '17

Hello, Do you have plan to integrate an comment field/system in alerting? By example : For indicate why we have muted the alert :-) For the moment, we have Google Sheet, but it's not really pratical... P.S : We can see history for specific alert? In alert detail, we don't find this. Many thank ! Johann

2 2

VyOS IPv6 BGP
by Kris Kirkland 31 May '17

31 May '17

Howdy, I know that the snmp mib for VyOS doesn't support IPv6 BGP peering, but can someone point me in the right direction to getting the that information into observium? -- ---- Kris Kirkland ~ K5KRK 2B1ASK1 - http://goo.gl/5bU4F0

5 9

add_device.php ignoring port numbers - fix
by Brandwatch NOC 31 May '17

31 May '17

Hi All, I recently added a list of devices that were behind the same IP address but each had different ports forwarded for snmp . I couldn't get the ports to be accepted as a variable using the add_device.php, one of my colleagues fixed the script so that it worked . Here's the diff if in case it helps anyone. diff add_device.php add_device.php.orig 1c1 < #!/usr/bin/php -q --- > #!/usr/bin/env php 73d72 < $snmp_port = $add[3]; 75c74 < //$snmp_port = 161; --- > $snmp_port = 161; Version Information *Observium* 17.5.8580 (28th May 2017) *OS* Linux 3.16.0-4-amd64 [amd64] (Debian 8.7) *Apache* 2.4.10 (Debian) *PHP* 5.6.29-0+deb8u1 (OPcache: ENABLED) *Python* 2.7.9 *MySQL* 5.5.54-0+deb8u1 (extension: mysqli 5.5.54) *SNMP* NET-SNMP 5.7.2.1 *RRDtool* 1.6.0 Regards, *Kevin Gee* Brandwatch | Network Engineer

1 0

Storage sizes flapping between actual size and 0B after upgrading to latest Pro from CE
by Michael Rohl 31 May '17

31 May '17

4 5

Cisco Memory Polling (CISCO-ENHANCED-MEMPOOL-MIB change?)
by Mailing Lists 30 May '17

30 May '17

Hi, Noticed that what seems to be all of our Cisco kit is no longer showing memory information in Observium (Running 8562 rolling)? If I look at one example Cisco device properties, the MIBS section looks like this, which suggests CISCO-MEMORY-POOL is suppressed and CISCO-ENHANCED-MEMPOOL-MIB is enabled. [image: Inline images 1] The SNMP errors sections also looks like htis, suggesting the CISCO-MEMORY-POOL-MIB is timing out: [image: Inline images 2] Device overview page [image: Inline images 3] However for this device, when manually doing an SNMPBULKWALK for ciscoEnhancedMemPoolMIB (1.3.6.1.4.1.9.9.221) the device doesn't respond to this object, however ciscoMemoryPoolMIB (1.3.6.1.4.1.9.9.48) returns results. Snippet of poller debug from this device: including: includes/polling/mempools.inc.php ##### Module Start: mempools ##### SQL[SELECT * FROM `mempools` WHERE `device_id` = '17'] SQL RUNTIME[0.00047684s] o Module time 0.0008s ##### device [17] completed poller modules at 2017-05-30 09:36:56 ##### On a different Cisco platform ciscoEnhancedMemPoolMIB (1.3.6.1.4.1.9.9.221) does return results from a manual walk, but Observium still doesn't show any memory objects in the device overview [image: Inline images 4] Second device MIB properties [image: Inline images 5] Snippet of poller debug from this second device: including: includes/polling/mempools.inc.php ##### Module Start: mempools ##### SQL[SELECT * FROM `mempools` WHERE `device_id` = '13'] SQL RUNTIME[0.00047684s] o Module time 0.0008s ##### device [13] completed poller modules at 2017-05-30 09:36:56 ##### Happy to provide full poller debugs directly so as to not share with the full list. Not sure if the issue is to do with the change in 8390? [FIX] Correctly suppress cisco-memory-pool-mib on devices where CISCO-ENHANCED-MEMPOOL-MIB is populated It's almost like the logic is backwards and the devices with enhanced Mempool support have the enhanced MIB disabled and devices without enhanced support have the enhanced MIB enabled? Any thoughts? Not sure if anyone else is seeing this? Thanks

1 1

Alerts checks on Custom OID
by Canto José 30 May '17

30 May '17

Hello, I implemented some custom OID (gauge), is it possible to define also Alertchecks on a custom OID? Thanks in advanced Best regards José

2 1

Alert checker and observium agent
by Vittorio Manfredini 30 May '17

30 May '17

I setup correctly the linux agent on our mail server to use postfix qshape. The graph are generated correctly, but I would like to generate an alert when the queue parameter, received by the agent, it's greater than 100. How can I do that ? Thanks in advance. Vittorio Manfredini Reparto IT <mailto:g.gigli@admiralclub.it> v.manfredini(a)admiralclub.it ALLSTAR SRL Via J.Kravogl, 2 I-39100 Bolzano Tel: +39 0471 098973 Fax: +39 0471 098900 La presente comunicazione (ed eventuali allegati) puo' contenere informazioni di carattere estremamente riservato e confidenziale ed e' riservata esclusivamente ai destinatari. Qualsiasi suo utilizzo, comunicazione o diffusione non autorizzata e' proibita. Se ha ricevuto questa comunicazione per errore, la preghiamo di darne immediata comunicazione al mittente e di cancellare tutte le informazioni erroneamente acquisite. Qualsivoglia utilizzo non autorizzato del contenuto di questo messaggio espone il responsabile alle relative conseguenze civili e penali. (Rif. D.Lgs. 196/2003). Grazie This message and its attachments may contain confidential or privileged information and are intended only for use by the addressees. Any use, re-transmission or dissemination not authorized of it is prohibited. If you received this e-mail in error, please inform the sender immediately and delete all the material. Any unauthorized use of the content of this message is strictly forbidden and the person responsible may incur penalties. (Rif. D.Lgs. 196/2003). Thank you.

2 1

[ASK] add simple queue to observium
by Andry Nata wijaya 29 May '17

29 May '17

Dear all, can anyone add graph simple queue Mikrotik in observium? My observium version : 0.16.11.8249 Best regards, Andry

2 1

device_status metric
by Ricardo Franco Cantero 29 May '17

29 May '17

Hi, I have a checker set up like this: device_status = 0 This gives an alert when the device is down. Unfortunately it gives lots of false positives, so perhaps I do not understand good enough how this checker checks if the connection is down or not ? What exactly does it check to see if the device is down? Kind regards, Ricardo Franco

2 1

Sudden Burst's in Traffic
by Afzaal Shabbir 27 May '17

27 May '17

Dear ALL, I am at version 0.16.11.8249 professional, this was working fine until recently, it is showing IPv4 traffic in GB's for some devices occasionally. Whilst other days it behaves normally. Please note this is Mikrotik router which we are monitoring. Please find attached graph. Any clue apart from updating to latest version which i will do latter after testing, is highly appreciated. Thanks, Afzaal

1 0

Device off line
by Fred Sharpsteen 26 May '17

26 May '17

Is there a way to make a sound or play a tune when there is a device is offline in Observium.

3 2

500 error when rebuilding alert checkers
by Jay Christopher 24 May '17

24 May '17

Hey everyone, I'm in the middle of standing up a new observium box and running into an issue where I create an alert checker for port errors. After creating the new checker, I click on rebuild and then get an HTTP 500 error. Attached is a screenshot of the configuration of the alert checker. I'm running 17.5.8561 (rolling) but did occur in a previous release and was hoping that upgrading would fix it but did not. -- Jay

2 2

Poller count
by Jay Hanke 24 May '17

24 May '17

I'm frequently running out of memory on a 4 GB VM running CentOS7. The vm only runs Observium. I'm seeing a bunch of php /opt/observium/poller.php processes getting created and the box gradually runs out of memory and mariadb dies. I'm running version 8485. Any ideas? Thanks! Jay

3 2

function rrdtool_lastupdate
by yan flou 24 May '17

24 May '17

hi all, i have a question, can you please tell me what function rrdtool_lastupdate in (rrdtool.inc.php) makes, because i ty to integrate a new backend "opentsdb" for observium for the moment i retrive the data and the metric by rrdtool_update and i send him in to opentsdb but i need also the tags because the index aren't clear for example this is what i have for mempools put net.mempool 1495461482 404979712.000000 hostname=localhost ifIndex=used-host-resources-mib-6 put net.mempool 1495461482 7845933056.000000 hostname=localhost ifIndex=free-host-resources-mib-6 put net.mempool 1495461482 2097152.000000 hostname=localhost ifIndex=used-host-resources-mib-10 put net.mempool 1495461482 1071636480.000000 hostname=localhost ifIndex=free-host-resources-mib-10 put net.mempool 1495461542 8063819776.000000 hostname=localhost ifIndex=used-host-resources-mib-3 put net.mempool 1495461542 1260826624.000000 hostname=localhost ifIndex=free-host-resources-mib-3 but me i wante to have this put net.mempool 1495468562 8075042816.000000 hostname=localhost ifIndex=used-Virtual-memory put net.mempool 1495468562 1249603584.000000 hostname=localhost ifIndex=free-Virtual-memory put net.mempool 1495468562 410640384.000000 hostname=localhost ifIndex=used-Memory-buffers put net.mempool 1495468562 7840272384.000000 hostname=localhost ifIndex=free-Memory-buffers put net.mempool 1495468562 2097152.000000 hostname=localhost ifIndex=used-Swap-space put net.mempool 1495468562 1071636480.000000 hostname=localhost ifIndex=free-Swap-space can you help me please. ________________________________ yan flou

2 1

Re: [Observium] Exclusion in "poller.php -h all"
by davide.magni＠sorint.it 23 May '17

23 May '17

Thank you for your help. Is there a way to have a more frequent polling or is not possible at all? *Davide Magni* Il 05/22/2017 10:59 PM, Tom Laermans ha scritto: > Hi Davide, > > Sorry to have mailed you in private, just saw it, meant to go to the > list... > > Yes, you won't have more accurate graphs when you run a poller every > minute, RRD will only store a single sample every 5 minutes. I thought > we had some docs on that, but I can't seem to find them right now :o > > Tom > > On 22/05/2017 14:19, davide.magni(a)sorint.it wrote: >> >> Yes I think that when the CPU is too high on the appliances they go >> in the state of "down", but if it's a problem to use 10 minutes >> interval, i'm going to use 5. >> >> I'm using 1 minute interval for some other appliances because i need >> more accurate graphs, is that a problem too? >> >> Thank you >> >> *Davide Magni* >> >> Il 05/22/2017 12:36 PM, Tom Laermans ha scritto: >>> >>> Hi Davide, >>> >>> This is currently not possible. >>> >>> Why do you need this specific cron job? Are the appliances too slow >>> to finish within 5 minutes? >>> >>> Things like our RRD storage are geared towards 5 min polling, >>> running the job every 10 minutes will give you other issues instead... >>> >>> Tom >>> >>> >>> On 05/22/2017 11:31 AM, Davide Magni wrote: >>>> >>>> Hi, >>>> I have a question about the "poller.php -h all" added in crontab, >>>> to run every 5 minutes. >>>> >>>> I need to install a cronjob for son specific appliances, to run >>>> every 10 minutes: >>>> >>>>> */10 * * * * /app/observium/poller.php -h 48 >>>>> */10 * * * * /app/observium/poller.php -h 49 >>>>> */10 * * * * /app/observium/poller.php -h 50 >>>> Is it possible to exclude this specific appliances from the "-h >>>> all" option? >>>> >>>> Thank you. >>>> >>>> -- >>>> *Davide Magni* >>>> >>>> >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >> >

2 1

Exclusion in "poller.php -h all"
by Davide Magni 22 May '17

22 May '17

Hi, I have a question about the "poller.php -h all" added in crontab, to run every 5 minutes. I need to install a cronjob for son specific appliances, to run every 10 minutes: > */10 * * * * /app/observium/poller.php -h 48 > */10 * * * * /app/observium/poller.php -h 49 > */10 * * * * /app/observium/poller.php -h 50 Is it possible to exclude this specific appliances from the "-h all" option? Thank you. -- *Davide Magni*

1 0

RealTime traffic view problem
by Richard Wigzell 19 May '17

19 May '17

Hello, we are running 17.5.8545 rolling and the Real time traffic graph is not working with the following error: "Can't get data about port (port id)" regardless of port id. This was previously working for all ports and now is not. [cid:image001.png@01D2D0A1.09D5BC00] We are also seeing the following errors in db.log when loading the page with the graph. [2017/05/19 12:54:44 +0100] index.php(3222): Failed dbQuery (#1054 - Unknown column 'pagpGroupIfIndex' in 'where clause'), Query: SELECT COUNT(*) FROM `ports` WHERE `pagpGroupIfIndex` = '10114' and `device_id` = '12' [2017/05/19 12:56:44 +0100] index.php(3222): Failed dbQuery (#1054 - Unknown column 'pagpGroupIfIndex' in 'where clause'), Query: SELECT COUNT(*) FROM `ports` WHERE `pagpGroupIfIndex` = '10114' and `device_id` = '12' [2017/05/19 12:57:44 +0100] index.php(16550): Failed dbQuery (#1054 - Unknown column 'pagpGroupIfIndex' in 'field list'), Query: SELECT `pagpGroupIfIndex` FROM `ports` WHERE `device_id` = '25' GROUP BY `pagpGroupIfIndex` [2017/05/19 12:57:58 +0100] index.php(3222): Failed dbQuery (#1054 - Unknown column 'pagpGroupIfIndex' in 'where clause'), Query: SELECT COUNT(*) FROM `ports` WHERE `pagpGroupIfIndex` = '10114' and `device_id` = '12' [2017/05/19 13:00:42 +0100] index.php(9137): Failed dbQuery (#1054 - Unknown column 'pagpGroupIfIndex' in 'where clause'), Query: SELECT COUNT(*) FROM `ports` WHERE `pagpGroupIfIndex` = '10114' and `device_id` = '12' [2017/05/19 13:02:56 +0100] index.php(16122): Failed dbQuery (#1054 - Unknown column 'pagpGroupIfIndex' in 'field list'), Query: SELECT `pagpGroupIfIndex` FROM `ports` WHERE `device_id` = '25' GROUP BY `pagpGroupIfIndex` Some help with fault finding this would be appreciated. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

[RFE] - Ability to sort BGP sessions per type / uptime / updates
by Youssef BENGELLOUN - ZAHR 18 May '17

18 May '17

1 1

Temperature sensors
by Justin Miller 15 May '17

15 May '17

I’ve got a lot of equipment outside and as the weather flips from cool to hot to cool to hot I get a lot of alerts. I’ve got swings from 30 to 55 c. Is there a way to widen the auto generated limits across all system temperature oids? I tried adjusting the alert test conditions using arithmetic but I do not think it’s implemented. I tried this: sensor_value greater (@sensor_limit*1.25) sensor_value less (@sensor_limit_low*0.75) Justin

1 0

Changing IP scheme
by Jason Vanlandingham 14 May '17

14 May '17

I'm about to change the IP addresses of the Observium server and all network devices. Do I need to do anything other than change the hosts file? (Not running DNS)

2 1

95th percentile line wrong
by Tony Lill 13 May '17

13 May '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I'm using CE 0.16.10.8128, and I've noticed the the 95th percentile line is way too high on my graphs. As in, higher than the max value. In perusing the code, I noticed that it was based on in and out BITS, whereas everything else is based on OCTETS. Changing the definition to use inoctets and outoctets fixes this. - -- Tony Lill, OCT, ajlill(a)AJLC.Waterloo.ON.CA President, A. J. Lill Consultants (519) 650 0660 539 Grand Valley Dr., Cambridge, Ont. N3H 2S2 (519) 241 2461 - --------------- http://www.ajlc.waterloo.on.ca/ ---------------- -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEARECAAYFAlkXUUoACgkQGS8yZq1uvxDHRwCbBQ41zE1medgwEpVV8tc+Vq9Y ka0An3eGRjD9t3scAmBm4I7vdZZJmiJH =eKWF -----END PGP SIGNATURE-----

1 0

Stuck alerts for sensors and statuses
by Robert Williams 12 May '17

12 May '17

Hi, Following a series of device upgrades and reloads over the last couple of days; we now have some 'invisible' stuck alerts: I cannot seem to find them anywhere, clicking them produces a blank list and even if you click the "Total" column. In this example I clicked the number "605" under Statuses but I get a page which only shows 595 items - so 10 missing, which equals the number of phantom alerts exactly. We had this once before and it was to do with devices, which are set to 'Ignore' for their alerts. We have 42 devices like this (a mixture of Lab and workstations) which unfortunately, would be a very large amount of manual checking. So I'm hoping there is a better way and I'm just missing it? :) So - any idea how I can find/reset/clear these items? Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

1 0