- observium - lists.observium.org

display all devices in frontpage
by Ridwan Firmansyah 16 Mar '17

16 Mar '17

Hi list, how to add more device_status in front_page observium, I have four devices registered but only 2 device displayed in front_page. see attached for details. rgds RIdwan

2 1

Observium compatibility as mobile apps
by Idzma Zakaria 16 Mar '17

16 Mar '17

Hi, I just create a mobile apps for observium but the page webview seem not capable for mobile viewing.It just a normal webview ( as seen on normal monitor). Is it can be done as for adaptive web design to suit mobile viewing?Any adjustments to the page itself? An advice really appreciated. Thank you. -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

2 2

alert checkers excluding device types
by Tomasz Karczewski 15 Mar '17

15 Mar '17

Hi, Simple question how to exclude for ex ample device types like servers from alert checkers? J Tomasz Karczewski Administrator Sieci olman tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

2 2

Cisco ASA 9.4(3)6 Remote Access Sessions
by Richard Reitenauer 14 Mar '17

14 Mar '17

I am currently using the latest community edition and looking to go to the professional subscription. With a Cisco ASA 9.4(3)6 and graphing the Remote Access Sessions, I am seeing odd data and it looks like others have had the same issue for a couple years now. I attached a screenshot of what I am seeing. >From Cisco CLI - show vpn-sessiondb anyconnect summary: VPN Session Summary --------------------------------------------------------------------------- Active : Cumulative : Peak Concur : Inactive ---------------------------------------------- AnyConnect Client : 96 : 8582 : 101 : 3 SSL/TLS/DTLS : 96 : 8582 : 101 : 3 >From Observium interface snapshot is attached. Is there any fix for this? Also, can we graph per anyconnect group? Thanks, Rich Reitenauer Sr. Infrastructure Analyst 1 Meridian Blvd, Suite 2C01 Wyomissing, PA 19610 O: 610-373-7999 x1255 rreitenauer(a)ugies.com<mailto:rreitenauer@ugies.com>

1 0

Custom OID
by Canto José 14 Mar '17

14 Mar '17

Hello, I implemented some custom OID (gauge), is it possible to define also Alertchecks on this custom OID? Thanks in advanced Best regards José

1 0

Minor graph problems
by William Bauer 14 Mar '17

14 Mar '17

Ever since I moved our installation from CentOS6 with PHP 5.6 to CentOS7 (7.3) with PHP 7.0, I've noticed that the MRTG, "Graph Maximum" and "Graph Trend" menu items don't do anything. All of them used to work great. Is this enough information to signal to anyone what particular PHP package or PHP configuration entry might have been missed? I'm hoping the combination of these three is a smoking gun that signals "X is missing". Thanks.

2 4

Simple service checks?
by Mark Boyce 13 Mar '17

13 Mar '17

Hi All Very new to observium, so please forgive me if this is a silly question :-) In order to migrate away from nagios we also want to be able to track non-snmp values. For example; - Response time of web sites (is response correct, if so report response time) - SSL Certificate (is cert ok, if so report number of days left) … and similar Very easily scriptable checks, I just can’t work out what to do with them. Ideally I’d like to create a device that doesn’t respond to SNMP checks but gets data from a local script. Is this achievable or am I completely misusing Observium? Simply trying to get everything monitoring from one place :-) Mark

3 5

Export Graph as CSV or Excel file
by Sophanith Chhom 11 Mar '17

11 Mar '17

Dear All, May I know if Observium already had a feature to export as CSV/Excel file from the graph? Thanks,

1 0

Re: [Observium] observium Digest, Vol 80, Issue 9
by Don Maker 10 Mar '17

10 Mar '17

"643m means 0.643 Adam." Thank you for the response, Adam. That makes sense, but numbers like 291.59m do not. Should I just assume that anything with an m is less than zero? On Thu, Mar 9, 2017 at 7:00 AM, <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: question regarding traffic accounting (Adam Armstrong) > 2. Re: question regarding traffic accounting (Michael) > 3. Re: question regarding traffic accounting (Adam Armstrong) > 4. Re: question regarding traffic accounting (Ross [Eve IT]) > 5. Re: question regarding traffic accounting (Adam Armstrong) > 6. Re: question regarding traffic accounting (Adam Armstrong) > 7. Re: Windows Processor Numbers are Odd (Max Krabbenhöft) > 8. SVN Update doesn't seem to update observium (Lorenzo Zafra) > 9. Re: Windows Processor Numbers are Odd (Adam Armstrong) > 10. Re: SVN Update doesn't seem to update observium (Adam Armstrong) > 11. Re: question regarding traffic accounting (Ross [Eve IT]) > 12. Re: question regarding traffic accounting (Ross [Eve IT]) > 13. Help with monitor Tomcat Traffic without Apache (Michael) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 08 Mar 2017 12:06:39 +0000 > From: Adam Armstrong <adama(a)memetic.org> > To: Observium Public Support <observium(a)observium.org> > Subject: Re: [Observium] question regarding traffic accounting > Message-ID: <9574d4e3-a350-4a31-9469-9d255671a64e(a)typeapp.com> > Content-Type: text/plain; charset="utf-8" > > It has to be large to keep the c*nt per square mile density the same as in > normal countries... > > ... > > :D > > ⁣Sent from BlueMail > > On 8 Mar 2017, 10:36, at 10:36, "Ross [Eve IT]" <ross(a)eve-it.net> wrote: > >Thanks for the response, > >It is virtual, we did actually vmotion a few hosts to this server > >including > >the Observium machine. > > > >But I've checked the hypervisor, and its clock is good. > >Also uses NTP, same as the other Hypervisors. > > > >Although good point, I've actually been thinking about that exact same > >thing for logging purposes. UTC across the board as we also span a few > >timezones, Australia is large! > > > > > >On Wed, Mar 8, 2017 at 9:29 PM, Michael <obslist(a)smarsz.com> wrote: > > > >> It's very odd as there's no timezone of UTC+21. > >> > >> Your Observium instance isn't virtual is it? We've encountered > >problems > >> with guests set to obtain their time from the local clock and (on > >ESXi > >> hypervisors) have a massive time jump when vmotioned to a new host as > >they > >> grab their time from that clock. Any inconsistencies between the > >> hypervisors will throw your guests clock big time. All of a sudden, > >your > >> guest has jumped +10 hours (and ntpd will often wet its pants and > >refuse to > >> correct such a huge offset)... > >> > >> We had a similar problem to above when one hypervisor was set to our > >local > >> time (+10/11, same as you) when it was supposed to be set to UTC. In > >our > >> case, we run all of our clocks deliberately in UTC to preserve > >logging > >> integrity etc (you never get duplicated log times during the daylight > >> savings shift). > >> > >> Might not be your issue, but it may help somebody else (and worth > >keeping > >> in mind)! > >> > >> Michael > >> > >> > >> > >> > On 8 Mar 2017, at 8:55 pm, Ross [Eve IT] <ross(a)eve-it.net> wrote: > >> > > >> > Looks correct > >> > > >> > mysql> SELECT TIMEDIFF(NOW(), UTC_TIMESTAMP); > >> > +--------------------------------+ > >> > | TIMEDIFF(NOW(), UTC_TIMESTAMP) | > >> > +--------------------------------+ > >> > | 11:00:00 | > >> > +--------------------------------+ > >> > 1 row in set (0.00 sec) > >> > > >> > mysql> > >> > > >> > mysql> SELECT @@global.time_zone, @@session.time_zone; > >> > +--------------------+---------------------+ > >> > | @@global.time_zone | @@session.time_zone | > >> > +--------------------+---------------------+ > >> > | SYSTEM | SYSTEM | > >> > +--------------------+---------------------+ > >> > 1 row in set (0.00 sec) > >> > > >> > mysql> > >> > > >> > # date > >> > Wednesday 8 March 20:55:17 AEDT 2017 > >> > > >> > > >> > > >> > > >> > On Wed, Mar 8, 2017 at 8:32 PM, Simon Schmitz <schmitz(a)eseven.de> > >wrote: > >> > MySQL Time ? > >> > > >> > Am 08.03.2017 um 15:31 schrieb Ross [Eve IT] <ross(a)eve-it.net>: > >> > > >> >> Tried all that, still no go. > >> >> > >> >> I've set PHP to the right timezone. > >> >> NTP is set and running on all our servers. > >> >> > >> >> Any other ideas ? > >> >> > >> >> > >> >> On Tue, Mar 7, 2017 at 7:45 PM, Sophanith Chhom < > >> sophanith.chhom(a)gmail.com> wrote: > >> >> Try to use single quote? eg: > >> >> > >> >> date.timezone = 'Australia/Melbourne' > >> >> > >> >> Then restart httpd service > >> >> > >> >> On Tue, Mar 7, 2017 at 3:28 PM, Ross [Eve IT] <ross(a)eve-it.net> > >wrote: > >> >> Hi Sam, > >> >> thanks for responding. > >> >> however I already have that set correctly. > >> >> > >> >> [Date] > >> >> ; Defines the default timezone used by the date functions > >> >> ; http://php.net/date.timezone > >> >> date.timezone = Australia/Melbourne > >> >> > >> >> any other ideas ? > >> >> > >> >> > >> >> On Tue, Mar 7, 2017 at 5:40 PM, Sam Hernandez-gill < > >> Sam.Hernandez-gill(a)qvc.com> wrote: > >> >> > >> >> I think that’s usually the php.ini timezone setting when the > >filtered > >> time doesn’t match, check out what you have set there, and match your > >> system’s timezone and restart apache > >> >> > >> >> > >> >> > >> >> From: observium [mailto:observium-bounces@observium.org] On Behalf > >Of > >> Ross [Eve IT] > >> >> Sent: Tuesday, March 07, 2017 1:19 AM > >> >> To: observium(a)observium.org > >> >> Subject: [Observium] question regarding traffic accounting > >> >> > >> >> > >> >> > >> >> Hello all, > >> >> > >> >> > >> >> > >> >> I'm using traffic accounting for multiple interfaces and have > >noticed a > >> strange occurrence. > >> >> > >> >> The graphs seem to be be producing the wrong time in the graphs. > >> >> > >> >> > >> >> > >> >> See attached; > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> If you notice the top right corner, 2017/03/08 03:15:04 > >> >> > >> >> It's Tues 7th here 5:15pm. > >> >> > >> >> > >> >> > >> >> The server clock is synced NTP. > >> >> > >> >> > >> >> > >> >> Is there something I've missed here ? > >> >> > >> >> > >> >> > >> >> Observium 17.3.8420 (rolling) > >> >> > >> >> Debian Wheezy. > >> >> > >> >> > >> >> > >> >> Ross. > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> ---------------------------- > >> >> This message (including any attachments) contains confidential > >> information intended for a specific individual and purpose, and is > >> protected by law. If you are not the intended recipient of this > >e-mail > >> (even if the e-mail address above is yours), (i) you may not use, > >copy or > >> retransmit it, (ii) please delete this message and (iii) please > >notify the > >> sender immediately. Any disclosure, copying, or distribution of this > >> message or the taking of any action based on it, is strictly > >prohibited. > >> >> ---------------------------- > >> >> > >> >> > >> >> > >> >> > >> >> _______________________________________________ > >> >> observium mailing list > >> >> observium(a)observium.org > >> >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >> >> > >> >> > >> >> > >> >> _______________________________________________ > >> >> observium mailing list > >> >> observium(a)observium.org > >> >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >> >> > >> >> > >> >> > >> >> _______________________________________________ > >> >> observium mailing list > >> >> observium(a)observium.org > >> >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >> >> > >> >> > >> >> _______________________________________________ > >> >> observium mailing list > >> >> observium(a)observium.org > >> >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >> > > >> > _______________________________________________ > >> > observium mailing list > >> > observium(a)observium.org > >> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >> > > >> > > >> > _______________________________________________ > >> > observium mailing list > >> > observium(a)observium.org > >> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >> > >> _______________________________________________ > >> observium mailing list > >> observium(a)observium.org > >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >> > > > > > >------------------------------------------------------------------------ > > > >_______________________________________________ > >observium mailing list > >observium(a)observium.org > >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

3 3

SVN Update doesn't seem to update observium
by Lorenzo Zafra 10 Mar '17

10 Mar '17

Hello All, I submitted a patch and it was commited in r8368, but when I run svn update to r8428 I dont get any of the changes. Anyone know whats wrong? We are running the subscription edition, if that matters. I checked to see if I would get the patch when creating a new copy of observium through [svn co ... ] and yes it worked fine. -- [image: Edmonton_sig_RGB_S.jpg] Lorenzo Zafra COMMUNICATIONS ENGINEERING STUDENT ENGINEERING & MAINTENANCE CITY OPERATIONS | EDMONTON TRANSIT 7 <(780)%20442-5021>80-944-0419 OFFICE 7 <(780)%20668-1302>80-885-3696 MOBILE l <matthew.dyck(a)edmonton.ca>orenzo.zafra(a)edmonton.ca City of Edmonton D.L. MacDonald Transit Yards ROW Building 13304 - 50A Street Edmonton AB T5A 4P6 All information contained in this email post is proprietary to the City of Edmonton, confidential and intended only for the addressed recipient. If you have received this post in error, please disregard the contents, inform the sender of the misdirection, and remove it from your system. The copying, dissemination or distribution of this email, if misdirected, is strictly prohibited.

2 4

question regarding traffic accounting
by Ross [Eve IT] 09 Mar '17

09 Mar '17

Hello all, I'm using traffic accounting for multiple interfaces and have noticed a strange occurrence. The graphs seem to be be producing the wrong time in the graphs. See attached; [image: Inline image 1] If you notice the top right corner, 2017/03/08 03:15:04 It's Tues 7th here 5:15pm. The server clock is synced NTP. Is there something I've missed here ? Observium 17.3.8420 (rolling) Debian Wheezy. Ross.

7 25

Logs for LDAP
by David Haché 09 Mar '17

09 Mar '17

Hi, I have been using observium for a while and I am pleased with it. Now when I try to integrate LDAP, I can't find the logs to troubleshoot. I activated LDAP and it connect correctly, the query looks good but no go. Log from my LDAP server [06/Mar/2017:16:41:55.102124385 -0500] conn=255138 op=1 SRCH base="cn=users,cn=accounts,dc=domain,dc=com" scope=2 filter="(&(objectClass=posixaccount)(uid=dave))" attrs=ALL Does anyone have suggestion how to activate the loggin for ldap on the PHP / NGINX / Observium side? Thanks. Dave

3 5

Windows Processor Numbers Seem Odd.
by Don Maker 09 Mar '17

09 Mar '17

"643m means 0.643 Adam." Thank you for the response, Adam. That makes sense, but numbers like 291.59m do not. Should I just assume that anything with an m is less than zero?

1 0

Help with monitor Tomcat Traffic without Apache
by Michael 09 Mar '17

09 Mar '17

2 1

Windows Processor Numbers are Odd
by Don Maker 09 Mar '17

09 Mar '17

I got observium working almost exactly how I want it, but I have an issue with Windows cpu numbers. The graph looks fine (I think), but the numbers are weird. The max numbers look like a percentage, but the now and Avg show odd things like 640.5m I have no idea what that means. Also, the processor is never identified properly. I would happily change to wmi for Windows devices, but I'm not sure how that is done, or if it is stable. Does anyone have any suggestions or experiences with wmi and observium? Thanks!

4 3

Discovery creating & deleting inventory entries
by Lorenzo Zafra 07 Mar '17

07 Mar '17

Hi All, When I run discovery.php on our Nokia 7210 Service Access Switch (Alcatel-Lucent TiMOS) it creates and deletes inventory entries and the valid entries are found at the bottom of the page. See screenshot below. Are these deleted automatically after some time? I found that there is an inventory.inc.php file for the housekeeping script, but it is not included in the options when running housekeeping.php. Does this mean that inventory.inc.php is deprecated? To delete them, I just edited the script myself and ran it. Thanks! -- [image: Edmonton_sig_RGB_S.jpg] Lorenzo Zafra COMMUNICATIONS ENGINEERING STUDENT ENGINEERING & MAINTENANCE CITY OPERATIONS | EDMONTON TRANSIT 7 <(780)%20442-5021>80-944-0419 OFFICE 7 <(780)%20668-1302>80-885-3696 MOBILE l <matthew.dyck(a)edmonton.ca>orenzo.zafra(a)edmonton.ca City of Edmonton D.L. MacDonald Transit Yards ROW Building 13304 - 50A Street Edmonton AB T5A 4P6 All information contained in this email post is proprietary to the City of Edmonton, confidential and intended only for the addressed recipient. If you have received this post in error, please disregard the contents, inform the sender of the misdirection, and remove it from your system. The copying, dissemination or distribution of this email, if misdirected, is strictly prohibited.

2 2

Event LOG ignore
by Alexandre J. Correa (Onda) 07 Mar '17

07 Mar '17

Hello, Thre´s a way to ignore/filter some event log like this (flooding, in this case): 8h 30m 57s GE0/0/5 MAC changed: xxx.xxx.xxx.xxx : 00:0c:29:51:1e:76 -> 00:0c:29:9f:26:47 14h 30m 37s GE0/0/5 MAC changed: xxx.xxx.xxx.xxx : 00:0c:29:9f:26:47 -> 00:0c:29:51:1e:76 4d 14h 30m GE0/0/5 MAC changed: xxx.xxx.xxx.xxx : 00:0c:29:9f:26:47 -> 00:0c:29:51:1e:76 4d 20h 30m GE0/0/5 MAC changed: xxx.xxx.xxx.xxx : 00:0c:29:51:1e:76 -> 00:0c:29:9f:26:47 5d 20h 30m GE0/0/5 MAC changed: xxx.xxx.xxx.xxx : 00:0c:29:51:1e:76 -> 00:0c:29:9f:26:47 7d 8h 31m GE0/0/5 MAC changed: xxx.xxx.xxx.xxx : 00:0c:29:9f:26:47 -> 00:0c:29:51:1e:76 7d 20h 31m GE0/0/5 MAC changed: xxx.xxx.xxx.xxx : 00:0c:29:51:1e:76 -> 00:0c:29:9f:26:47 8d 2h 30m GE0/0/5 MAC changed: xxx.xxx.xxx.xxx : 00:0c:29:9f:26:47 -> 00:0c:29:51:1e:76 8d 8h 30m GE0/0/5 MAC changed: xxx.xxx.xxx.xxx : 00:0c:29:51:1e:76 -> 00:0c:29:9f:26:47 8d 14h 31m GE0/0/5 MAC changed: xxx.xxx.xxx.xxx : 00:0c:29:9f:26:47 -> 00:0c:29:51:1e:76 8d 20h 30m GE0/0/5 MAC changed: xxx.xxx.xxx.xxx : 00:0c:29:51:1e:76 -> 00:0c:29:9f:26:47 9d 8h 30m GE0/0/5 MAC changed: xxx.xxx.xxx.xxx : 00:0c:29:9f:26:47 -> 00:0c:29:51:1e:76 10d 8h 31m GE0/0/5 MAC changed: xxx.xxx.xxx.xxx : 00:0c:29:51:1e:76 -> 00:0c:29:9f:26:47 .... .... some servers share same loopback address (dns anycast). regars, -- Fwd: a *Alexandre Jeronimo Correa* / CEO _alexandre(a)onda.net.br <mailto:alexandre@onda.net.br>_ / Office +55 34 3351 - 3077 *ONDA INTERNET* +55 34 3351-3077 Av. Benedito Valadares, 217 – Centro – Sacramento – MG - BR _http://www.onda.net.br <http://www.onda.net.br/>_

3 2

artificially high (100%) CPU usage reported from routing engine on Juniper MX-104 w/ 550 interfaces & solution
by Darrell Budic 07 Mar '17

07 Mar '17

Observium has been recording artificially high CPU for RE0 on my MX-104, and I finally spent the time to understand what was going on and look for a solution. Here’s what I found in case it helps someone else. I say artificially because monitoring the system from the CLI reported 30-40% CPU usage with significant spikes during SNMP polling, but Observium constantly recorded 100% CPU usage. First up, I got the juniper to stop reporting on it’s internal interfaces and a bunch of others that show up by default. This removed a bunch of interfaces that existed but never had data and observing was polling. This cut the poll time down a fair bit, so I mention it if you haven’t used it on a juniper before. If you want this, it’s: snmp { filter-interfaces { all-internal-interfaces; interfaces { <other interface you don’t want stats for here>; } } } I also went through and turned off all the modules it wasn’t using or weren’t producing any data in polling or discovery. Helped a little more, but exposed something odd. When I would run polling on just the processors module, it would report CPU usage that matched what I saw in the CLI. When it ran as part of the whole host polling, it reported 100%. Figured out it was polling the processors after it had polled sensors and the 550 interfaces on this router, and that has run up the CPU utilization while it was polling, so the RE was reporting that instant CPU usage while it was still high. Not sure it was the best way, but moved the processor module to the head of the polling queue, and now I’m getting a CPU status that is more representative of the general load on the RE, and not the 100% usage the SNMP polling was causing. This router has always had this many interfaces, so as far as I can tell, a change in polling order caused this behavior and not a growth in interfaces. Here’s my patch to includes/polling/functions.inc.php if it’s helpful to anyone: Index: functions.inc.php =================================================================== --- functions.inc.php (revision 8345) +++ functions.inc.php (working copy) @@ -639,6 +639,11 @@ //print_warning("Module [ $module ] excluded for device."); continue; } + if ($module == 'processors') + { + array_unshift($poll_modules, $module); // Add 'processors' before all + continue; + } if ($module == 'unix-agent') { array_unshift($poll_modules, $module); // Add 'unix-agent' before all

1 0

migrating observium to a new server
by Shawn Faulkingham 06 Mar '17

06 Mar '17

Is anyone aware of any documentation to migrate an observing installation to a new server? I am moving from CentOS 6 to CentOS 7 for security and PHP reasons. If anyone has any pointers, I would greatly appreciate it. Thanks, Shawn Faulkingham

4 8

Observium-OpsGenie integration
by Celal Emre Çiçek 06 Mar '17

06 Mar '17

Hello, My name is Celal Emre ÇİÇEK and I'm an integration engineer at OpsGenie. I'd like to know if there are any changes in the latest updates of Observium that could affect Observium - OpsGenie integration. Today, one of our customers came up with a problem. He says Observium alerts aren't being forwarded to OpsGenie. He also says that he didn't change any configuration in Observium and in OpsGenie. We've confirmed that he didn't change any configuration in our side. We also asked him to check his Observium configuration and compare it with our docs. He's checked and nothing is wrong. So, we wonder if there are any changes that affect OpsGenie integration in Observium in the latest updates, maybe some changes in the backend. Could you please check and return to us? Best regards, Celal Emre ÇİÇEK

2 2

Integration with IBM blade chassis
by Youssef BENGELLOUN - ZAHR 05 Mar '17

05 Mar '17

4 16

[observium] facing problem in email alerting.
by Santanu Mandal 05 Mar '17

05 Mar '17

Hello Guys, I am facing a problem regarding Observium Alerting. Few days ego I have enabled alerts and configured to send to couple of specific email ids. Configured those email Ids in .php file as well as in GUI. Due to some reason I have removed those email Ids to stop sending alerts. Now Observium starts collecting email ids from ‘snmp contact’ configuration of device and sending alerts to this email id. Please let me know what to configure so that Observium would not be able to send emails to the email id which is configured in snmp contact of network device ? Thanking you, Santanu Mandal +91 7028357135

2 1

Update to Cisco memory usage details.
by Don Maker 05 Mar '17

05 Mar '17

So, I installed the CE edition on an Ubuntu vm (rather than use the Turnkey appliance), and I now see Cisco memory usage, but all of my graphs, for all devices, show no values. Every graph just shows -nan Not sure what is going on there. Thanks

2 2

Frequency bug
by Simon Mousey Smith 04 Mar '17

04 Mar '17

Hi All Has anybody else got this issue I have with the frequency sections of devices? if any device frequency is above 1Ghz it isn’t showing the value correctly in the graphs or in the table correctly, they are just showing 1Ghz not like it should Screenshots showing issue on a mikrotik device and a raspberry pi Regards Simon

4 9

RFE - Support for IBM triphased PDUs
by Youssef BENGELLOUN - ZAHR 04 Mar '17

04 Mar '17

1 0

Fortigate Firewalls port names not showing
by Richard Savage 03 Mar '17

03 Mar '17

Hi Fortigate have release a new software train 5.4 and it seems as if observium is having trouble getting the interface names and now we just see blank names separated by a comma: Can this be fixed please? If you need any debug then please let me know. Regards Richard

4 9

Unable to parse header `DSName' rrdtool
by Sam Hernandez-gill 03 Mar '17

03 Mar '17

I have a few different rrdtool graphs that are outputting "RRDTool Output: ERROR: rrdc_fetch: Unable to parse header `DSName'" So far I've only noticed it on specific Citrix Netscaler graphs, the Netscaler SSL ones nsSslHandshakes, nsSslSessions, etc and TCP Connections and TCP Packets for the netscalers are all in the same state with Unable to parse header `DSName'. [cid:image001.png@01D29412.6D368F20] Sadly I didn't notice when, I did recently upgrade to revision 8417, however these aren't graphs I frequently look at. Anybody else with netscalers in their environment at the same revision? Thanks, Sam ---------------------------- This message (including any attachments) contains confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient of this e-mail (even if the e-mail address above is yours), (i) you may not use, copy or retransmit it, (ii) please delete this message and (iii) please notify the sender immediately. Any disclosure, copying, or distribution of this message or the taking of any action based on it, is strictly prohibited. ----------------------------

2 2

Migration CentOS 6 to 7 - Graphs Failing
by Storer, Darren 03 Mar '17

03 Mar '17

Our Observium professional server file system was recently damaged beyond recovery. Fortunately the database and the Observium directory had been backed up the night before. The older server OS was CentOS 6 and the new OS is CentOS 7 (both 64 bit). The Observium directory was restored and the database imported; now the Observium web page is working well, with visibility of all devices, historic stats/states/graphs etc. The cron jobs are running and polling etc. - the state of devices updates dynamically via the map too. However, there are no updates to the any of the graphs. I'm not sure if there is a database problem, RRD problem or file permissions problem. Placing /debug after various pages does not reveal any problems. Can anyone recommend other places to look for debug/logging information? Thanks in advance Darren

2 2

[observium] facing problem in email alerting.
by Santanu Mandal 03 Mar '17

03 Mar '17

Hello Guys, I am facing a problem regarding Observium Alerting. Few days ego I have enabled alerts and configured to send to couple of specific email ids. Configured those email Ids in .php file as well as in GUI. Due to some reason I have removed those email Ids to stop sending alerts. Now Observium starts collecting email ids from 'snmp contact' configuration of device and sending alerts to this email id. Please let me know what to configure so that Observium would not be able to send emails to the email id which is configured in snmp contact of network device ? Thanks,

2 1

Traffic Accounting
by Fred Pedrisa 03 Mar '17

03 Mar '17

Hi, guys. I plan to renew my subscription with you, but before doing it, I wanted to make sure, if now we can select "which stream" can be accounted, being : rx, tx or rx+tx, I'm asking this, because we have different ways of billing customer ports and this is a must for us. If this is not present, any chance you could add a switch for this ? It would be great if so. Sincerely, Fred

2 7

Re: [Observium] observium Digest, Vol 80, Issue 3
by Don Maker 03 Mar '17

03 Mar '17

Sorry, but I don't see any attached graphs. I do believe that Cisco memory graphs are working for other people, just not for me. When I go to graphs, system, all I see is processors and device uptime. Not sure where to start troubleshooting and/or correcting this. I should also note that I am using the Turnkey Linux appliance. On Fri, Mar 3, 2017 at 7:00 AM, <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Syslog parsing for NXOS (Markus Bornhauser) > 2. Should I be seeing memory usage graphs on Cisco devices? > (Don Maker) > 3. Re: Should I be seeing memory usage graphs on Cisco devices? > (Lyndon Labuschagne) > 4. Re: Should I be seeing memory usage graphs on Cisco devices? > (Storer, Darren) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 2 Mar 2017 14:20:14 +0100 > From: Markus Bornhauser <kusi.bornhauser(a)gmail.com> > To: observium(a)observium.org > Subject: [Observium] Syslog parsing for NXOS > Message-ID: > <CADRv88-VsDrnd+8XJKWBxGSctpbV_g3Nz1Tf04M+ > kAAgFX3pNw(a)mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > Hi list, > > Sorry if this had been asked before, but I'm unable to browse the > mailing list archives. > > I have set up syslog parsing with Rsyslogd, like documented [1]. The > syslog.php script does receive the logs and saves them in the > database. Parsing logs from both Cisco Catalyst (IOS) and Cisco Nexus > switches, I discovered that the NXOS logs are parsed incorrectly (see > screenshot [2]). > > Does Observium support NXOS logs, or do I have to change something to > make it as perfect as with IOS logs? > > [1] https://observium.org/docs/syslog/#rsyslogd > [2] https://snag.gy/2eDsgH.jpg > > > ------------------------------ > > Message: 2 > Date: Thu, 2 Mar 2017 13:14:17 -0500 > From: Don Maker <don.p.maker(a)gmail.com> > To: observium(a)observium.org > Subject: [Observium] Should I be seeing memory usage graphs on Cisco > devices? > Message-ID: > <CACF+TreB1n9aB8KC5noXBakgWB_qWMGEjGtAL73mXiwHE08guA@mail. > gmail.com> > Content-Type: text/plain; charset="utf-8" > > I have various Cisco devices ( catalyst switches, ios routers, ios-xe, > etc), but none of them are showing any memory usage details in observium. I > was surprised by this as observium did a remarkable job of recognizing and > displaying information for things that most snmp tools do not, Qnap for > example. It does recognize my Cisco devices and reports back on just about > everything, but memory. Other tools I tried, such as Manageengine, PRTG, > etc reported the memory with no issue. So, I'm skeptical that there is > anything wrong with my snmp setup. > > > > I would really love to get memory usage for my Cisco devices. If anyone has > any suggestions, I'm all ears. > > > > Thanks >

2 1

Should I be seeing memory usage graphs on Cisco devices?
by Don Maker 03 Mar '17

03 Mar '17

I have various Cisco devices ( catalyst switches, ios routers, ios-xe, etc), but none of them are showing any memory usage details in observium. I was surprised by this as observium did a remarkable job of recognizing and displaying information for things that most snmp tools do not, Qnap for example. It does recognize my Cisco devices and reports back on just about everything, but memory. Other tools I tried, such as Manageengine, PRTG, etc reported the memory with no issue. So, I'm skeptical that there is anything wrong with my snmp setup. I would really love to get memory usage for my Cisco devices. If anyone has any suggestions, I'm all ears. Thanks

3 2

Syslog parsing for NXOS
by Markus Bornhauser 02 Mar '17

02 Mar '17

Hi list, Sorry if this had been asked before, but I'm unable to browse the mailing list archives. I have set up syslog parsing with Rsyslogd, like documented [1]. The syslog.php script does receive the logs and saves them in the database. Parsing logs from both Cisco Catalyst (IOS) and Cisco Nexus switches, I discovered that the NXOS logs are parsed incorrectly (see screenshot [2]). Does Observium support NXOS logs, or do I have to change something to make it as perfect as with IOS logs? [1] https://observium.org/docs/syslog/#rsyslogd [2] https://snag.gy/2eDsgH.jpg

1 0

Help.
by Raimundas Šlepikas 02 Mar '17

02 Mar '17

helo, after update in some devices, we`a mising some Hardware info, in that case, it`s hart to find groupe devives by hw, there some samples before, and after. can u help me in this case Please ;) old fw dedlink sw :) sysObjectID => .1.3.6.1.4.1.171.10.75.15.2 sysDescr => DES-1210-28/ME 6.07.B042 sysContact => version => 6.07.B042 hardware => DES-1210-28/ME features => null location => Kovo-11osios-g-36-Kaunas os => dlink status => 1 with new fw, after update sysObjectID => .1.3.6.1.4.1.171.10.75.15.2 sysDescr => DES-1210-28/ME/B2 sysContact => version => 6.10.B017 hardware => features => null R. -- Best regards, Raimundas mailto:raimis@kis.lt

2 5

Search in device Description feature request
by Richard Wigzell 01 Mar '17

01 Mar '17

Hello, we have a small feature request; would it be possible to search for values in the device Description? ('purpose' column in device table). Preferably from the live search box thing in the top right of the UI? This would be a most useful feature for us. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

SNMP support for blades' internal components (CPU, memory DIMMs, etc.)
by Youssef BENGELLOUN - ZAHR 01 Mar '17

01 Mar '17

3 9

Observium weathermap issue
by Sophanith Chhom 01 Mar '17

01 Mar '17

Hi All, I think weathermap is not part of Observium, but if anyone has the same issue with me please share Since I tried to created a few maps via web using weathermap editor like example1.conf, example2.conf, example3.conf and point it to like /maps/example1.html, /maps/example2.html, /maps/example3.html Then I tried to open each map, but all maps will link to the same content instead (like in the same example3). This is so strange if anyone used to have this issue like me, please share how you can fix it Thanks a lot

1 0

Observium API / CE 0.16.1.7533
by Uwe Freier 28 Feb '17

28 Feb '17

Hello, sorry for a maybe stupid question but I searched the Observium docs and FAQs and tried to search the mailing lists archive but latest was not available because the link to 'observium Archivs' on mailman's web interface leads to a 404. Is there an API to Observium and if is there a doc anywhere? Maybe I'm blind but I cannot find any related information if I inserted 'API' in the search field of the Obeservium docs. Google finds some pages that talk of " $config['api']['enabled'] = 1;" and/or query strings for an api.php - I do not even have an api.php in my observium installation. Some Observium values should be made available through a CRM and an API might be a smooth solution. Any tipps appreciated! Thanks, Uwe

1 0

Aggregate graph show not accurate total max of traffic
by Sophanith Chhom 28 Feb '17

28 Feb '17

Hi All, I have one question related to aggregate maximum of graph I have sum up two ports together but it is actually not accurate Eg: one port: 10.54 Gb and another port: 10.95 Gb So total of max should be 10.54+10.95 = 21.49 but the real on graph is showing 21.34 instead Can anyone help to explain me about this? Please check on picture bellow [image: Inline image 1] Appreciate for your explanation Thanks

5 13

No Memory Usage Details on Any of My Cisco Equipment
by Don Maker 28 Feb '17

28 Feb '17

I don't see any graphs, or any other information, for any memory usage statistics on any of my Cisco devices: 3560G, CSR1000v, 2821, etc.. Thank you.

2 1

Wrong graph display with specific date and time filtering
by Sophanith Chhom 28 Feb '17

28 Feb '17

Hi All, I want to display graph in specific time and date but it looks like different as output Eg: I filter from: 2017-02-28 06:00:00 to 2017-02-28 08:00:00 and as a result display taken from 13:00 to 15:00 instead Please see my picture bellow: Do you have any idea about this? [image: Inline image 1] Thanks

3 4

Re: [Observium] SNMP support for blades' internal components (CPU,
by Youssef BENGELLOUN - ZAHR 27 Feb '17

27 Feb '17

Dear Michael, SNMP is perfectly responsive on those hosts : root@prod-monit-002:/opt/observium# snmpwalk -v 2c -c asp par01-esx2-bl2 sysDescr SNMPv2-MIB::sysDescr.0 = STRING: VMware ESXi 5.5.0 build-3568722 VMware, Inc. x86_64 I have attached a full snmwalk output from one of the host as an example. Best regards. Le 27/02/2017 16:19, « observium au nom de Michael » <observium-bounces(a)observium.org au nom de obslist(a)smarsz.com> a écrit : Looks to me like there's no data at all coming back from either of those esxi hosts. "WARNING: 0 devices discovered" Could you try the following query to see what comes back snmpwalk -v3 <your-snmpv3-details-here> par01-esx02-bl2 sysDescr I think you need to validate that your server is actually answering SNMP queries for you. VMware have long been reluctant to do much with SNMP (prefering to push people towards vCenter/vCOPS). As a result, their support for revealing lots of physical host information leaves a bit to be desired. Cheers, Michael > On 27 Feb 2017, at 9:35 pm, Youssef BENGELLOUN - ZAHR <ybzahr(a)prodware.fr> wrote: > > > Dear Observium, > > This is a request for information / enhancement, I hope you will find it relevant / useful. Actually running latest stable version 17.2.8364. > > We run quite a lot of blade chassis (DELL M1000e, IBM bladecenterH, IBM pureflex) and monitor the blades in the enclosures, more specifically the ESXi hosts servers. > > I recently noticed that we were not able to recover SNMP information about physical components’ status (CPU, memory DIMMs, etc.). We are more interested in memory DIMM status. > > I have run a discovery against a couple of hosts in debug mode and can see that recovered SNMP information is pretty basic (see attached). > > Do you think it would be possible / interesting to recover such information ? > > Thank you for your feedback. > > Best regards. > > > Youssef BENGELLOUN - ZAHR - Consultant Expert > Prodware France > T : +33 979 999 000 - F : +33 988 814 001 - ybzahr(a)prodware.fr > <image23bec5.PNG>Web : prodware.fr > > <image9b26f1.JPG> <image5c3e4c.JPG> <image0119e3.JPG> <imagee569c0.JPG> <image93eaa0.JPG> <image039eb0.JPG> > > > > <par01-esx02-bl2.txt><par01-esx03-bl2.txt> BENGELLOUN - ZAHR Youssef - Consultant Expert Prodware France T : +33 979 999 000 F : +33 988 814 001 - ybzahr(a)prodware.fr Web : prodware.fr _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 3

No graph policy description on Cisco CBQoS graph
by Sophanith Chhom 27 Feb '17

27 Feb '17

Dear All, I wonder why Cisco CBQoS graph on Observium Pro have no graph description(policy name) show up? Since I observe there is policy description name showing up on Observium Community Edition. It should display something like: CUST-Name / class-default (input) CUST-Name / class-default (output) Can you guide if we can enable it on the script somewhere? Thanks so much.

2 3

Disable IF-MIB cisco nexus
by Svensson Fredrik A 24 Feb '17

24 Feb '17

Hi there! Due to a bug I want to disable the IF-MIB, on my nexus devices, is that possible? There is no specific IF-mib in the Device-MIB, is it included in some of the other MIBs? ADSL-LINE-MIB enabled  Disable BGP4-MIB enabled  Disable CISCO-AAA-SESSION-MIB enabled  Disable CISCO-BGP4-MIB enabled  Disable CISCO-CDP-MIB enabled  Disable CISCO-CEF-MIB enabled  Disable CISCO-EIGRP-MIB enabled  Disable CISCO-ENHANCED-MEMPOOL-MIB enabled  Disable CISCO-ENTITY-FRU-CONTROL-MIB enabled  Disable CISCO-ENTITY-PFE-MIB enabled  Disable CISCO-ENTITY-QFP-MIB enabled  Disable CISCO-ENTITY-SENSOR-MIB enabled  Disable CISCO-ENTITY-VENDORTYPE-OID-MIB enabled  Disable CISCO-ENVMON-MIB enabled  Disable CISCO-FLASH-MIB enabled  Disable CISCO-IETF-IP-MIB enabled  Disable CISCO-IETF-PW-MIB enabled  Disable CISCO-IP-STAT-MIB enabled  Disable CISCO-IPSEC-FLOW-MONITOR-MIB enabled  Disable CISCO-MEMORY-POOL-MIB enabled  Disable CISCO-POWER-ETHERNET-EXT-MIB enabled  Disable CISCO-PROCESS-MIB enabled  Disable CISCO-REMOTE-ACCESS-MONITOR-MIB enabled  Disable CISCO-RTTMON-MIB enabled  Disable CISCO-TRUSTSEC-INTERFACE-MIB enabled  Disable CISCO-VPDN-MGMT-MIB enabled  Disable CISCO-VTP-MIB enabled  Disable ENTITY-MIB enabled  Disable ENTITY-SENSOR-MIB enabled  Disable EtherLike-MIB enabled  Disable HOST-RESOURCES-MIB enabled  Disable IP-MIB enabled  Disable LLDP-MIB enabled  Disable MPLS-L3VPN-STD-MIB enabled  Disable MPLS-VPN-MIB enabled  Disable OSPF-MIB enabled  Disable POWER-ETHERNET-MIB enabled  Disable Q-BRIDGE-MIB enabled  Disable SMON-MIB enabled  Disable SNMP-FRAMEWORK-MIB enabled  Disable SNMPv2-MIB enabled  Disable UCD-SNMP-MIB enabled  Disable

2 1

Can't login to Subscription Management
by Karolis Birgėla 24 Feb '17

24 Feb '17

Hello, as our staff is changing over time, we lost the credentials to the client area. Is there a possible way to get the info back? We only know the email.. Thank you. UAB "Kauno Interneto Sistemos", Lithuania

1 0

Observium 1min poller interval?
by Sophanith Chhom 23 Feb '17

23 Feb '17

Dear All, Is it possible to schedule 1min for poller interval? By default it is 5min interval. Thanks

5 5

Graph direct link changes when group membership changes
by Jesper Frank Nemholt 23 Feb '17

23 Feb '17

Hi! I'm using the direct link to graphs for a dashboard. Not sure this was the intended usage, but I found an issue that I think could be avoided related to this. It looks like graphs in this view are getting encoded IDs that somehow relate to the devices in the group, so the URL looks like this below. The issue is that when having lots of devices in a view, the id field gets really long and eventually will cause the graph creation to fail....however another and bigger issue is that it seems the id actually change when new devices are added (which happens during auto-discovery). Is there any way to fix the id to a numeric number like used with other graphs ? http://observium/graph.php?to=1487801959&id=WyIzMjE5MSIsIjMyNTE1IiwiMzMxNjM… /Jesper

3 2

Re: [Observium] Can't write new info to Observium
by Karolis Birgėla 22 Feb '17

22 Feb '17

On 2017.02.22 14:00, observium-request(a)observium.org wrote: > Can't write new info to Observium Also, another problem we have noticed, I wonder if it's related to the caching update. When using device search (Devices->All Devices), then selecting hardware type (for example DES-1210-26/ME), we can find 8 devices from our network, that's ok. But we have updated the firmware version of this specific device, and when trying to do the same search in Observium, It can't find the device with updated firmware. And this happened with every device we upgraded. Quick search bar finds the device without any problems. Could this be related to the caching update? Thank you

1 0

all VMs Removed - why ?
by Thoralf Freitag 22 Feb '17

22 Feb '17

Hi, is there any idea, why observium has removed all VMs from the ESXi Server, like this: 1d 2h 3m Vm Virtual Machine deleted: vmware 564da96d-e3b0-b511-66cc-2a184a576652 1d 2h 3m Vm Virtual Machine deleted: vmware 564d8984-0864-6b78-7d91-36f2c13e53d6 1d 2h 3m Vm Virtual Machine deleted: vmware 564d4905-87d7-6fdf-bc72-753c916ef3c1 1d 2h 3m Vm Virtual Machine deleted: vmware 564d2060-e2e4-9949-97a6-28cb5f02e801 1d 2h 3m Vm Virtual Machine deleted: vmware 564d3421-27c8-04ea-7ef8-139af5ebcb5c 1d 2h 3m Vm Virtual Machine deleted: vmware 564d18eb-bad5-0691-7acf-3cb24787c0c1 1d 2h 3m Vm Virtual Machine deleted: vmware 564d523c-b392-e037-12e6-4c93b9dc82b1 1d 2h 3m Vm Virtual Machine deleted: vmware 564dc378-b321-2b72-176f-09c8fc5a1116 1d 2h 3m Vm Virtual Machine deleted: vmware 564db385-e361-5d0a-3167-d9a416357692 ... The tab for virtual machines no longer appears ... . There was no change at the ESXi. VMWARE-SYSTEM-MIB and VMWARE-VMINFO-MIB are enabled. I restarted the snmp agant at the ESXi host, run poller.php again , but it changes nothing. Thanks for any suggestions. lg. TF

2 4

Can't write new info to Observium
by Karolis Birgėla 22 Feb '17

22 Feb '17

Hello all, never happened to me before, but Obsevium acts strangely lately for me. When trying to add a new device via web, it sucessfully adds it, but it's page appears to be missing. It says something like 'You entered a device which does not exist' or something similar. What is more, when I want to manually change device's description on the web, it says 'Device record updated'. But the info that I've written has not appeared. What could have caused this? I don't remember doing any changes to my Observium server, except doing an update. Version 17.2.8364 (stable) Everything else works as it should. Thank you

2 1

ASR9k RAM Changes
by Robert Williams 22 Feb '17

22 Feb '17

Hi, Have there just been some changes to the ASR9k RAM detection? Suddenly after the overnight svn up we are seeing this for all 9k chassis: [cid:image001.png@01D28C23.56E5F220] These 3 new items are in alarm. The “reserved” and “image” are filtered from all other devices by existing config.php – but obviously no brackets on these ones. $config['ignore_mempool_string'][] = '(reserved)'; $config['ignore_mempool_string'][] = '(image)'; However, the ‘processor’ one is actually wrong as it seems to be using the CPU0 usage but a strange maximum of 3.81GB instead of 7.81GB. I can’t filter this out because it will drop all ‘processor’ types. I remember something historic relating to this where the maximums were showing as around 4GB even though there is 8GB installed and someone (Adam?) found and sorted it. This may or may not be related though. Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

4 5

Alert regeneration via cli?
by Michael 22 Feb '17

22 Feb '17

Is there a way to regenerate the alerts from the cli? We have some checks that alert based on port state, dependent on conditions within a port description. But that matching is only performed during the alert regeneration, not during polling. So if the port description gets updated, the alert still triggers based on the old condition match... I'm thinking of running a regen via cron on a regular basis to try and minimise the false positives. Unless somebody has a better way to achieve a similar outcome? Thanks, Michael

2 2

Poller wrapper history graphs not updating
by Jesper Frank Nemholt 21 Feb '17

21 Feb '17

Hi! I have moved an instance from a physical server to a VM by moving over the database & RRD files + Observium $HOME. All works except one minor thing : The poller wrapper history (/pollerlog/ page) graphs do not update anymore. Also the RRD files do not update their timestamp since I moved the files to the new VM. The poller discovery/timing part of the same page does work properly, so it's only the top two graphs missing (or rather the graphs are there, but no new data is being added). Any idea why ? /Jesper

3 6

Memory graph missing
by Simon Mousey Smith 21 Feb '17

21 Feb '17

Hi All, I’ve got up this morning to find our nightly SVN UP has messed up the memory graphs for all our switches/servers/etc…? What appears to be be happening is its looking for the file 'mempool-HOST-RESOURCES-MIB-65536.rrd' which doesn’t exist BUT 'mempool-host-resources-mib-65536.rrd’ does exist Case-senstive I believe Anybody else had this issue? Regards Simon

2 2

Re: [Observium] ASR9k RAM Changes
by Moerman, Maarten 21 Feb '17

21 Feb '17

There’s currently work being done on redoing memory pools to ‘definitions’ – probably related. Maarten From: observium <observium-bounces(a)observium.org> on behalf of Robert Williams <Robert(a)CustodianDC.com> Reply-To: Observium Public Support <observium(a)observium.org> Date: Tuesday, February 21, 2017 at 10:20 AM To: "Observium Network Observation System (observium(a)observium.org)" <observium(a)observium.org> Subject: [Observium] ASR9k RAM Changes Hi, Have there just been some changes to the ASR9k RAM detection? Suddenly after the overnight svn up we are seeing this for all 9k chassis: [cid:image001.png@01D28C2D.94872EF0] These 3 new items are in alarm. The “reserved” and “image” are filtered from all other devices by existing config.php – but obviously no brackets on these ones. $config['ignore_mempool_string'][] = '(reserved)'; $config['ignore_mempool_string'][] = '(image)'; However, the ‘processor’ one is actually wrong as it seems to be using the CPU0 usage but a strange maximum of 3.81GB instead of 7.81GB. I can’t filter this out because it will drop all ‘processor’ types. I remember something historic relating to this where the maximums were showing as around 4GB even though there is 8GB installed and someone (Adam?) found and sorted it. This may or may not be related though. Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

2 1

Specify snmp timeout for single device.
by Gabriel Zamorski 20 Feb '17

20 Feb '17

Hey, I would like to ask if it is possible to specify snmp timeout for a single device in Observium? I tried to do that in Device > Properties > SNMP > Timeout, but each time I try to change this empty field to 100 or 200… I get info: “Device SNMP configuration update is not required” Regards, Gabriel

2 1

Observium tunning
by chott＠praha1.net 19 Feb '17

19 Feb '17

Hello team what is best solution for tunning performance like different Hardrive for MySQL/RRD and System? What about performance SSD Raid or RAM Disk? We are using VMware, with iSCSI SAS and SSD , for System SAS drive for RRD/MySQL two drive from SSD Raid any idea? like HW Raid without iSCSI? Now we have more than 500 devices, 4000 ports and 3000 sensors Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

4 4

using hardware sensors
by Thoralf Freitag 19 Feb '17

19 Feb '17

Dear Observium community, is there any description of using hardware sensors? I've following issue. I'm operating a HP server with an Ilom under Ubuntu Linux. I configured in the device properties for ipmi: IPMI Hostname (IP address of the Ilom), IPMI Username (as configured at Ilom) IPMI Password, IPMI Userlevel (User) IPMI Interface (IPMI v2.0 RMCP+LAN Interface). Observium rekognized the sensors for temperature und fan speed. I did the same at an other HP server (same type) which is running ESXi 6.5 (HP customized Image). The Sensors are shown in the vSphre-Client and ESXi empeded host client UI. But for this host, Observium does not rekognize the sensors. How can this be explained ? Thanks. Lg. TF

2 2

Group with 500+ devices
by Karolis Birgėla 19 Feb '17

19 Feb '17

Hi, I have a problem with device classification to specific groups. We currently have 750 devices added in our network. Some users can only have access to specific devices, which led us to creating a group associated with them. The problem is, that more than 500 devices belong to the group, and when we attach this group to a user, it lags like hell. The main window of Observium loads slowly, and the search works very slow. I dont think that the server is incapable of proccesing this quickly It's a server with 80gb of ram, 24core cpu. By the way, admin accounts work perfectly . Is this a bug? Or something needs to be done in order? Let me know, thank you.

4 12

Poller coding scheme
by Youssef BENGELLOUN - ZAHR 19 Feb '17

19 Feb '17

3 4

Copy from Old to New server
by chott＠praha1.net 19 Feb '17

19 Feb '17

Hello everybody how we can copy all Observium data from OLD to NEW server? i means RRD probably [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 1

SummitD support like Siklu
by chott＠praha1.net 18 Feb '17

18 Feb '17

Hello Mike there is support for Siklu device in r8371 what about support similar device Summit Development http://www.summitd.cz/cz/download/mib-file Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

1 0

Mail list Archives throw 404
by Ramiro Rojo 17 Feb '17

17 Feb '17

Greetings, Trying to acces to the Observium Archives (http://postman.memetic.org/pipermail/observium/) is not working. Are you looking for a solution for it, or is the page on the documentation outdated?

1 0

Ruckus Virtual SmartZone (vSZ) controller
by Philippe Laurent 17 Feb '17

17 Feb '17

It seems that either the Ruckus MIB changed, or my expectation of function is different than reality. We run the Ruckus Virtual SmartZone (vSZ) to control our AP's. At the moment, Observium provides just the local attributes (CPU, NIC, RAM, Disk) of the virtual machine, but it was my impression that I was supposed to get a much larger subset of data regarding AP's, configured WLANS, clients and traffic, etc. It appears in the MIB properties that the data should be available, but perhaps there's been a change of MIB from the Ruckus side (in which case I would also like to pay for getting that updated). Attached is a screenshot of the Device MIBs and SNMP errors as reported by Observium. If you require something else, please let me know. I am using the most recent software version for both vSZ and the APs (R600). Observium is updated from SVN daily(ish). If this requires more heavy lifting or outside of the scope, then please contact me offline for pricing and timeline, and I'll sponsor the additions. Philippe [image: Inline image 1]

1 0

Generate an BGP group with only like clue the interface description?
by Johann Mallet 17 Feb '17

17 Feb '17

Hello, We would like create alert on BGP sessions only on private peering. The only clue for detected these BGP sessions is the description on interface. But Observium seems don't can link session<->network ports. I don't find easy solution to match these sessions. Anybody have an idea? Observium seems to be able link one IP to network port. Is it possible for you add functionality to link BGP sessions (with their IP) to network port too? We could do a really great monitoring and see BGP sessions linked to the network port (on new tab?) :-) Johann

3 4

CSS Bug on 8360?
by Johann Mallet 17 Feb '17

17 Feb '17

Hello, I have update to SVN 8360. And now we don't have all field in search bar on device/port page : Do you have same issue? Thanks, Johann

3 7

Alert cache bug maybe
by Simon Mousey Smith 17 Feb '17

17 Feb '17

Hi All, Im not sure if other people are having this issue or not, but since the caching has gone into Observium my alerts tab hasnt been working correctly? I’ve been getting the alerts perfectly fine! But the tabs are wrong? Attached shows the home page which shows I have an alerts FAIL, however when i go into the alerts page I have none? Also I haven’t been notified of a FAIL alert either? Caching bug maybe? Regards Simon

3 8

Custom OID and New Sensors
by Ing. Andrés Gallo 16 Feb '17

16 Feb '17

Hi there Just installed the Observium 17.2.8353 to monitor our network Great job! I need to handle a couple of issues: 1. Once I did Custom OID to monitor, How Can I set threshold or alarm limit to get an alert? For example, graphing fuel level, raise an alert on low value. 2. Some devices are recognized by the system-i.e. EATON SC Controller-, but sensors -voltage, current, power, etc.- are not. I can write a sensor.inc.php -same way as others into includes/discovery/sensors dir- but even with the debug option in command line, cant´t get it working. Any clue? Couldnt find the list archive ( mybe solved there, but....) link is broken Regards Andres.-

1 0

Upgrades
by Pedrosi, Derek G. 16 Feb '17

16 Feb '17

What is the procedure for moving observium to a new box? I know I’ve seen snippets of this in email before, but I am unable to track down a procedure. Also, are there any issues that would occur moving from Debian (currently wheezy) to Ubunut 16? Thanks, derek

3 2

how to set an alert based on a custom OID?
by Thomas Stather 16 Feb '17

16 Feb '17

Hello all For our UPS i have implemented some custom OIDs, here is an example: Description: Battery Voltage OID: .1.3.6.1.4.1.818.1.1.10.2.5.0 Name: upsBatteryVoltage.0 Type: Gauge Unit: V How to i now create an alert check that i.e. fires if the Value is below 300? Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV Tel: +49 6221-486 628 Fax: +49 6221-486 561 ------------------------------------------------------------------------ Max Planck Institute for Medical Research (MPImF) Jahnstrasse 29, 69120 Heidelberg Germany

2 1

Installation on FreeBSD 11
by Andrew Meyer 15 Feb '17

15 Feb '17

So I have it observium almost fully setup on FreeBSD 11 however I can't get Apache 2.4 to work. I'm getting a error that php is too old. Has anyone else run into this? php56 apache24 <VirtualHost *> LoadModule rewrite_module libexec/apache24/mod_rewrite.so DocumentRoot /usr/local/www/observium/html CustomLog /usr/local/www/observium/logs/access_log combined ErrorLog /usr/local/www/observium/logs/error_log <Directory "/usr/local/www/observium/html"> DirectoryIndex index.php AllowOverride All Options FollowSymLinks MultiViews Require all granted </Directory> LogLevel debug </VirtualHost>

7 8

Import Alerts XML File
by Richard Müller 15 Feb '17

15 Feb '17

Hy *, do you know how to import exported Alerts XML Files, right now? I checked google + documentation but it seems that I am to stupid. Thanks Richard -- <http://www.teamix.de>[teamix]<http://www.teamix.de> Richard Müller Geschäftsführer teamix GmbH Südwestpark 43 90449 Nürnberg Tel.: +49 911 30999 0 Fax: +49 911 30999 99 mail: rm(a)teamix.de web: http://www.teamix.de blog: http://blog.teamix.de Amtsgericht Nürnberg, HRB 18320 | Geschäftsführer: Oliver Kügow, Richard Müller, Jakob Høholdt *** Bitte liken Sie uns auf Facebook: facebook.com/teamix ***

1 0

Map marker icon size
by Ed Iwanski 15 Feb '17

15 Feb '17

We are adding quite a few locations to our install and after adding the first batch our front page map ends up with quite a bit of overlap while we have many more to add. It got me thinking if we could just make the individual markers smaller it would work better for us. Looking into the settings it seems there was an option for: $config['frontpage']['map']['dotsize'] = 10; Changing this seems to have no effect and a quick glance it does not seem to be used anymore Doing a little more digging in the code it looks like the html/includes/map/leaflet.inc.php has options defined to add the svg icons with static sizes with the following: var icons = { ok: L.icon({ iconUrl: 'images/svg/ok.svg', popupAnchor: [0, 16], iconSize: [24, 24] // size of the icon }), alert: L.icon({ iconUrl: 'images/svg/high_priority.svg', popupAnchor: [0, 12], iconSize: [32, 32] // size of the icon }), }; It seems just changing the values in iconSize: [X,Y] accomplishes what we would like to do to make the marker size a bit smaller and the maps to be more clear with many more sites added. Maybe 2 new example variables to allow a little further map customization? $config['frontpage']['map']['markeroksize'] = <value>; $config['frontpage']['map']['markeralertsize'] = <value>; Thanks, Ed

2 6

Custom port description parser
by Dan Letkeman 15 Feb '17

15 Feb '17

Hello, I was wondering if anyone has some info on how to do custom port description parsing? I already have my ports labeled and I would like to add custom port lists to the ports menu. Thanks, Dan.

4 14

Observium Groups - Unable to select group type
by Serghei Golipad 14 Feb '17

14 Feb '17

Hi, It appears i'm unable to create a Port Group Type and it defaults to device instead. Running Rolling Release: 8349 [cid:bb15044f-ecff-41e1-ab25-d9f73926a120] Thanks PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

3 3

PHP upgrade
by Mahurin, Randy 14 Feb '17

14 Feb '17

Good Morning, I'm due to upgrade PHP on my Observium install. Does anyone have any pointers/processes for upgrading PHP from 5.4.16 to either 5.6 or 7.0 on the Observium install? I'm on RHEL 7 and subscription version 17.1.8318. Thank you for your help Randy Mahurin --------------------------------------------------------------------- This transmission may contain information that is privileged, confidential and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. Thank you. ---------------------------------------------------------------------

5 4

Missing transceivers sensors from Brocade FCX series switchs
by Youssef BENGELLOUN - ZAHR 14 Feb '17

14 Feb '17

2 2

authentication timeout or random logout
by Dan Letkeman 14 Feb '17

14 Feb '17

Does anyone else have issues with random logouts on 17.1.8318? I will be working on or looking at something, clicking menu's, and then all of the sudden i'm at the login screen. Sometimes it happens after a few minutes of the initial login, and sometimes its hours later. PHP 5.6.30 Centos 7.3.1611 Active directory authentication. Dan.

4 7

LDAP Debug Support
by Ryan DeShone 14 Feb '17

14 Feb '17

Can anyone point me in the right direction for debugging LDAP authentication? Running the most current stable release of the Professional edition currently on CentOS 7 (in our test environment). Upgraded PHP to 7.1, as the older PHP we had installed was not working, now I cannot log in. It just loops me back to the main page. I was also getting TLS negotiation errors (with a blank error message) though I seem to have solved that particular issue for now. I can't seem to figure out how to enable debug logging though so that I can find out what's going on...

3 4

RANCID
by chott＠praha1.net 13 Feb '17

13 Feb '17

Hello team, Some time ago I had configured Rancid and Cisco SB. Now after a bit of update Observium does not write device OS type ciscosb to Router.db How i can add Cisco SB for Observium export Router.db Thank you [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 4

Pro edition
by William Bauer 12 Feb '17

12 Feb '17

Not sure if this is the best place to ask these questions, but I haven't had any success with direct emails to keep this off the list. Might have sent them to the wrong address. I'm interested in getting the subscription, or Pro, edition of Observium. I've been asked to see if we can get an eval so we can determine if the enhancements either improve compatibility with Brocade VDXes, and/or if the additional features we would gain are of value to us. We are also a registered nonprofit in the US if that qualifies us for free access to the subscription edition. Thanks for any help!

4 5

Selectively enable polling fdb-table
by Ulrik Ivers 10 Feb '17

10 Feb '17

Hi, We have globally disabled polling fdb-table, i.e in in config.php we have $config['poller_modules']['fdb-table'] = 0; Now we'd like to selectively ENABLE polling of the fdb-table, but only on a subset of devices. Is there a way to do this? From what I can figure out it's only possible to do it the other way around, that is enable fdb-table polling GLOBALLY and then device by device DISBALE polling. But we'd like to have polling OFF by default and then selectively enable it on a few devices. Any ideas? Regards, /Ulrik Ulrik Ivers Excanto AB Sveavägen 63 | 113 59 Stockholm Mobil: 0709-90 95 06 Växel: 08-545 726 00 Web: www.excanto.se<http://www.excanto.se/> [cid:00CF51FD-3438-404B-AFC3-5D60876E5B9A]

1 1

Traffic group multiple network types
by H Box 10 Feb '17

10 Feb '17

Hi All, I try to create a ports group to filter the uplinks. Now i have the follow Assocations: Device Match:hostname match *.hostname.net Entity Match:ifName eq eth0 This works perfect but i want to have the options to add more network card types like: Entity Match:ifName eq eth0,em1,p2p1,et_0 etc etc how can i create a entity string? Greetings remco

2 3

Connect Via options.
by Mike Hyslop 10 Feb '17

10 Feb '17

On network devices if you hover over the cog on the right hand side you get a bunch of connect via.. SSH, HTTPS, HTTP etc.. is there a way for those items to also appear on firewalls? as that would be really nice to have.. Kind Regards Mike Hyslop | Senior Infrastructure Engineer [access-point-logo-sml] Accesspoint Technologies | Unit 7 | Ashton Gate | Ashton Road | Harold Hill | RM3 8UF Main: 0203 189 2645 Opt 2 | DDI 0208 102 1121 Email: mike.hyslop(a)theaccesspoint.co.uk<mailto:mike.hyslop@theaccesspoint.co.uk> | Web: http://www.theaccesspoint.co.uk<http://www.theaccesspoint.co.uk/> | Twitter: @accesspointnoc<https://twitter.com/accesspointnoc>

5 6

Cisco WLC and monitoring AP
by chott＠praha1.net 10 Feb '17

10 Feb '17

Hello team, can i monitoring Cisco AP under WLC controller? by this case https://supportforums.cisco.com/discussion/11394301/cisco-wlc-ap-count-over… probably WLC via SNMP can controll it, for me i need create Alert for unregistrer AP. Can i monitor this by Observium? Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 4

Equallogic, Compellent & other storages
by Eduardo Schoedler 10 Feb '17

10 Feb '17

Hi, Recently I noticed that Observium do collect information about network storage devices. There is a way to collect information about their volumes too? And how about alerts? :) Thank you. Regards, -- Eduardo Schoedler

6 5

network weathermap
by Johns, Daniel (GPK) 09 Feb '17

09 Feb '17

Is anyone familiar with this? http://blog.best-practice.se/2014/07/using-php-weathermap-with-observium.ht… Does it still work with the subscription version of Observium? Im having trouble making it work. I followed the steps to a T but... no luck. I even made a network map with 2 devices but I'm not sure that's even correct because the weather maps never load. It goes back to the regular index.php page Thanks for any tips -Daniel

2 1

Setting default sensor limits
by Dan Letkeman 09 Feb '17

09 Feb '17

Just wondering what the best way is to set the default sensor limits? For example, I would like to set the battery temperature sensor max to 50C for all of our UPS units instead of the current default of 91.36C which would basically mean that the ups has melted into the floor.

3 3

Set System Name
by Dan Letkeman 09 Feb '17

09 Feb '17

We have many Ricoh printers and copiers. Because SNMP is horrible on these devices I am unable to set the System Name (sysName). Is there a way to set this manually in Observium?

5 18

Customer's web portal for Observium
by Sophanith Chhom 09 Feb '17

09 Feb '17

Hi All, Is there an additional plugin for managing user and group for Observium? Or anywhere we can modify for user customer's portal purpose? Eg: For customer web accessing, we only provide normal user permission applied with limitted device or port access for that customer only and it should not display Overview, Grouping, Weathermap, Routing module.... anywhere we can disable that kind of module to accomplish? We just want a normal user see only device and port are allowed only. Please check as bellow picture Can we just disable these red box for normal user accessing? [image: Inline image 1] Thanks for your help.

3 8

No current total bandwidth for port grouping
by Sophanith Chhom 09 Feb '17

09 Feb '17

Hi All, I have group two ports together to see port graph stack, but I wonder why there is no current total for grouping (aggregation) as bellow picture: http://imgur.com/jYw7jfS Can we fix it or is it a bug? Thanks so much

2 2

How to create an alert checker for high cpu wait
by Michael Rohl 08 Feb '17

08 Feb '17

I am trying to create an alert for high cpu wait, but cannot figure it out. Is this supported or do I need to find another way? [image: Inline image 2][image: Inline image 1] Thanks -- Michael Rohl System Administrator Alaska Satellite Facility 907.474.7864 mjrohl(a)alaska.edu

2 3

AD Ldap Authentication Debug
by Dan Letkeman 08 Feb '17

08 Feb '17

Hello, I'm trying to setup AD Ldap authentication and getting nowhere. I'm running observium version 17.1.8318 and PHP 7.0.15. I have ldap enabled and I have verified that with phpinfo. When I try to login with these settings in my config.php it just goes back to the login page with no failed login message or any other notice. I have tried to use observium.domain.com/debug/ but it does the same thing. $config['auth_ldap_binddn'] = "cn=ldapproxy,cn=Users,dc=domain,dc=ca"; $config['auth_ldap_bindpw'] = "password"; $config['auth_ldap_attr']['uid'] = "sAMAccountName"; $config['auth_ldap_attr']['uidNumber'] = "objectSid"; $config['auth_ldap_attr']['cn'] = "name"; $config['auth_ldap_attr']['dn'] = "distinguishedname"; $config['auth_ldap_objectclass'] = "person"; $config['auth_ldap_version'] = 3; $config['auth_ldap_server'] = "ldap.domain.ca"; $config['auth_ldap_port'] = 389; $config['auth_ldap_starttls'] = FALSE; $config['auth_ldap_prefix'] = "CN="; $config['auth_ldap_suffix'] = ",DC=domain,DC=ca"; $config['auth_ldap_group'] = array("CN=Domain Admins,OU=Users,DC=domain,DC= ca"); $config['auth_ldap_groupbase'] = "OU=Users,DC=domain,DC=ca"; $config['auth_ldap_groupmembertype'] = "fulldn"; $config['auth_ldap_groupmemberattr'] = "member"; unset($config['auth_ldap_groups']); $config['auth_ldap_groups']['CN=Domain Admins,OU=Users,DC=domain,DC=Ca']['level'] = 10; $config['auth_ldap_groups']['CN=Domain Users,OU=Users,DC=domain,DC=Ca']['level'] = 1; Is there a log somewhere that shows whats happening? Also I am unable to start httpd on centos7 with these virtual host settings as per the installation manual: <VirtualHost *> DocumentRoot /opt/observium/html/ ServerName observium.domain.ca CustomLog /opt/observium/logs/access_log combined ErrorLog /opt/observium/logs/error_log <Directory "/opt/observium/html/"> AllowOverride All Options FollowSymLinks MultiViews Require all granted </Directory> </VirtualHost> Thee customlog and errorlog lines have to be commented out for the server to start. Can anyone verify that those log settings work on centos7? Perhaps I have some kind of rights issues with the files? Thanks, Dan.

3 6

Syslog alerting OSPF state change
by Tim Schroepfer 08 Feb '17

08 Feb '17

I set up syslogging then creating the alert check looking for /FULL\ to\ DOWN/ for cisco i manually triggered the events in my network on a unused path and the syslog messages came in but i didn't get any triggers on the alert checkers. Is there something wrong with my setup or alert checks? Where would I start looking?

1 0

CBQoS graph on Huawei device not support?
by Sophanith Chhom 08 Feb '17

08 Feb '17

May I know currently Observium supports for CBQoS graph on Huawei device? Thanks.

2 1

Cisco WLC inventory duplicate
by chott＠praha1.net 07 Feb '17

07 Feb '17

Hello team, in WLC controller we have Deleted AP in Inventory but WLC has same Serial number one more time in list as Active [cid:17497cd4-7f14-4875-aed7-6227384483bd]

4 4

Observium User default settings
by Jonathan Nieves 07 Feb '17

07 Feb '17

Hello, I was wondering if there was an option to automatically set groups to any users that get added to the console? Thanks, * * * * Jonathan Nieves Security Operations Lead CipherTechs, Inc. 90 Broad St., 5th Floor New York, NY 10004 | 212-897-6900 x227 F 212-897-6909 | M 646-283-9235 To open a support ticket please email support(a)ciphertechs.com<mailto:support@ciphertechs.com> Jonathan Nieves Security Operations Lead CipherTechs, Inc. 212-897-6900 x227 (o) 646-283-9235 (m)

3 4

Temperature Alerts
by Josh Hopper 07 Feb '17

07 Feb '17

What is the sensor_value measured in? C or F? I would like to set my own limit. Or, if I am choosing the wrong value, what should I pick? Thanks! -- JOSHUA HOPPER NETWORK ENGINEER 1-828-558-1403 Joshua.Hopper(a)broadplex.net www.broadplex.net

2 1

Observium wrong graph traffic statistic
by Sophanith Chhom 07 Feb '17

07 Feb '17

Dear Team, I just install Observium and as I observed the graph traffic statistic seem not accurate compared to my Cacti graph monitoring system then I ask my Network Engineer to check which one is accurate traffic between Observium and Cacti, as the result after checking real traffic on my router device, Observium seems not accurate. Note: Graph statistic value is different is around 1GB, this is a huge number. Can anyone explain why or anyone experiences like me? [image: Inline image 1] My real Out traffic should be around 5.78GB instead Thanks so much.

5 10

Traffic graph don't work over 100G?
by Johann Mallet 07 Feb '17

07 Feb '17

Hello, On our network, we have aggregate ports with multiple 100G ports. When the trafic is over 100G, the traffic graph don't work : http://imgur.com/a/JvzIB But the another graphs, like "Unicast Packets", works without issue. Johann

2 2