- observium - lists.observium.org

[observium] HP Power consumption
by D vA 06 Jan '17

06 Jan '17

Thank you all for any response and for the great observium tool! I was wondering if obserium could monitor my HP Proliant power consumption (on Linux server). During my initial search I found 2 items in JIRA: http://jira.observium.org/browse/OBSERVIUM-476 and http://jira.observium.org/browse/OBSERVIUM-1834 After installing the hp-snmp-agents and activating them in SNMP I see information in snmpwalk (using this as resource: http://webcache.googleusercontent.com/search?q=cache:-mM1kr6Ubv0J:thejimmah… ) But unlike JIRA issue-1834 suggests only very few information was added. 59m 28s srv01 Asset_tag -> 59m 28s srv01 Serial -> CZJ2XXXXXX 59m 28s srv01 Hardware -> HP ProLiant ML350 G6 x86 [64bit] When looking at the following Nagios check a lot more information could be added: https://exchange.nagios.org/directory/Plugins/Hardware/Server-Hardware/HP-%… Has anybody tried adding extra information for HP servers? Is it possible to add the power consumption to Observium, and if yes, how? Thanks in advance! Regards, Dion

3 4

overloading yahoo, and others [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 06 Jan '17

06 Jan '17

Geocoding ENABLED, try detect device coordinates: by PARSING sysLocation (API: YAHOO) - TOO MANY REQUESTS GEO API REQUEST: http://gws2.maps.yahoo.com/findlocation?format=***json&locale=***en_US&flag… CE-580cf8ac&location=***Adelaide%2C+AU Would you be open to the idea of having a location table. Each device could have a location lat/long drawn from the table. That way, any observium system would only need to update a new location once and not dozens or hundreds of times (one for each device in a location). thanks Peter Hine Senior Technical Support Engineer (Servers) Corporate Services | Federal Court of Australia ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

1 0

Alert entity references
by Garrett Pye 05 Jan '17

05 Jan '17

Setting up alert types and curious if those referenced in the documentation is generic for all supported devices? Trying to set up the following power supply threshold as an example to test alert and notification. Just little confused on the required syntax for entity. Meaning, does Observium know what "power" is regardless of the device and by the looks of the graph it measures in "watts". [image: Inline image 3] [image: Inline image 1] [image: Inline image 2]

3 2

Device access configuration option
by Garrett Pye 05 Jan '17

05 Jan '17

Is there code options for config.php to configure access options? Also, this does not show for all HP devices with the same OS. [image: Inline image 1]

2 2

Environmental sensors support for NetApp storage arrays
by Youssef BENGELLOUN - ZAHR 05 Jan '17

05 Jan '17

2 2

Subscriber license for Enterprise project
by Garrett Pye 05 Jan '17

05 Jan '17

The site indicates a Professional Edition can be available for Open Source projects and curious if I am testing this in an Enterprise environment if that would qualify for this edition? Curious about the grouping feature and especially the threshold alerting to compare with Nagios currently in use in our production environment. //Garrett

1 0

Mailing list archive
by Eric 05 Jan '17

05 Jan '17

Does the mailing list archive have a new home? Haven't been able to view it for quite some time from the subscribe page.

1 0

OpenStreetMap slow?
by Ron Marosko 05 Jan '17

05 Jan '17

Is it me, or has OpenStreetMap just become horribly slow to load? -- Ron Marosko, Jr. . . . . . . . . . . . . . . . . . . . . . . . . . . CCIE No. 4526 (R/S), NN5DX Senior Network Engineer RJR Services, Inc. 1108 West Dickinson Blvd, Suite A Fort Stockton, TX 79735 USA o: +1 432 336 5600 x115 c: +1 432 290 6344 e: <mailto:ron@rjr-services.com> ron(a)rjr-services.com pgp pubkey: <http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x778B3B0258AB8B5C> 0x58AB8B5C "To know me is to fly with me." -- This message has been scanned by E.F.A. Project and is believed to be clean.

3 6

Observium device capacity and SIP
by Garrett Pye 05 Jan '17

05 Jan '17

Currently testing Observium in lab environment with an initial 90 HP devices to possibly propose migrate away from Nagios. I don't see in the documentation if there is a performance limit reached if and when I add another 40 devices. Also, does this same platform support SIP error logging traffic or is it limited to discovered enabled modules? //Garrett

3 5

32 vs 64 iftable counters
by Andrew Dul 05 Jan '17

05 Jan '17

Hello, We have some switches which have broken 64bit iftable snmp counters. I've opened a bug report w/ the vendor, but don't have an ETA on a fix at this time. The 32bit counters seem to be working ok. Is there a way to tell Observium to just use the 32bit counters? Thanks, Andrew

1 0

How to trigger a geolocation update ????? [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 05 Jan '17

05 Jan '17

Hi, I have some devices where i have had to manually set the location. I am seeing, since CE:16.10.8128, that the devices with custom locations are not updating their geolocation info and are reporting unknown for all location info. abxbuild2,"Albury, AU",au,New South Wales,Albury City Council,Albury abxmain1,"Albury, AU",au,New South Wales,Albury City Council,Albury abxrt011,"Albury, AU",unknown,Unknown,Unknown,Unknown abxsw011,"Albury, AU",unknown,Unknown,Unknown,Unknown abxups1,"Albury, AU",au,New South Wales,Albury City Council,Albury I tried with abxrt011 to change the location to "Albury, AU" (extra space) which correctly triggered as an update to the custom location, but no geocode update occurred normally I see event log lines like ... |-----------------+-----------+-----------> |2017-01-05 |dc6ipvcmcu1|dc6ipvcmcu1| |09:18:59 | | | |-----------------+-----------+-----------> >-----------------------------------------------------------------------------------------------------------------| |Geolocation (YAHOO) -> [-35.280552, 149.125417] Australia (Country), Australian Capital Territory (State), | |Unknown (County), Canberra (City) | >-----------------------------------------------------------------------------------------------------------------| so could there be a bug for custom locations ?? what file is the geolocation lookup occuring in ? thanks Peter Hine Senior Technical Support Engineer (Servers) Corporate Services | Federal Court of Australia ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

1 0

HP iLO IP address compatibility
by Garrett Pye 04 Jan '17

04 Jan '17

Is there a configuration Observium has to include HP iLO interface IP? Currently it looks like neither adding a device or port inventory does not support monitoring the iLO port. *Garrett Pye* *CNOC Engineer | Business Class Voice* 5800 S. Quebec St, Greenwood Village, CO 80111

3 4

topology Map
by ridwan 04 Jan '17

04 Jan '17

Hi list, is it possible to draw topology map in observium ?, we are planning to display our LAN Topology on big screen TV Rgds Ridwan

2 1

modify device overview
by Ted G. Freitas 03 Jan '17

03 Jan '17

I was wondering if there is a way that the device overview screen can be modified so that we see the syslog-alerts instead of the full syslog? Also can this be added to the main overview screen as well? Thanks in advance!

1 0

Adding a ptpd application to unix-agent
by Adrian Murphy 01 Jan '17

01 Jan '17

Hi, I have been playing with ptpd on my network to see how it behaves compared to ntp. I really like the observium monitoring of ntp. I use Observium CE 0.16.10.8128 (6th October 2016) on FreeBSD 10.3 & 11.0 So, I had a crack at implementing ptpd as an application for unix-agent guided by http://observium.org/docs/developing/add_app/ which says: “• RRD formats are defiend in includes/definitions/rrdtypes.inc.php” But this doesn’t exist in my installation and I am suspecting config['rrd_types'] is defined in includes/definitions/definitions.dat which I don’t know how to read. So when polling the servers with ptpd, I get this error: “Cannot create RRD for type ptpd-slave - not found in definitions!” Is there anyway I can get past this? Or is this something I shouldn’t be doing? I went back through old observium mailing list mail and found: Subject: Re: [Observium] custom unix-agent application > On 24 Nov 2016, at 7:20 pm, Adam Armstrong <adama(a)memetic.org> wrote: > > Hi Yogi, > > I've rewriting this application code and it'll be committed to the repository sometime soon. You'd missing out a few definition entries and had copied an old method of building applications. > > The application was being deleted because you weren't using update_application(). > > Once it's run for a while here and I can see that it all works, I'll commit it to the SVN, and you'll be able to update and use it then. > > Thanks, > adam. > > Sent from Mailbird > On 22/11/2016 08:51:06, Yogi Sofiharja <yogi_sofiharja(a)biznetgio.com> wrote: > > Dear Community, > > > I am creating application to monitor disk response time at VM level using ioping. > > But every time i run the poller with debugger, i’ve got no error but my application always been deleted by the system because its lastpolled is 0. i’ve try to follow the documentation, but its seems like i can’t get solution. > > Do you guys have any solution for this or you have the same problem? I’m worried this means I will not be able to make it work in Observium CE. HNY & Cheers, Adrian

1 0

Authentication log bug
by Observium 30 Dec '16

30 Dec '16

Hi Adam and team, We found a bug in the authentication log this evening. One of our guys tried logging in to our Observium but couldn't remember his username. However, when he tried logging in he used an uppercase letter in his username, and it still allocated the attempted login to his user account, even though Observium uses case-sensitive usernames and the attempted login would be different from his actual user account - his username is "lee", but he (incorrectly) tried "Lee". Testing with my own account shows that any username with the same spelling will show up under that account, even though the users are not the same. Kind regards, Alex

2 1

AVTech devices
by Philippe Laurent 30 Dec '16

30 Dec '16

Just purchased the Pro version of Observium (damn good looking stuff) and am running 0.16.12.8292. Looking at the JIRA, I understand that AVTech devices are a pain due to the way the vendor writes the MIB. Nonetheless, their equipment and expandability is good, and they do provide SNMP data that can be harvested. I've purchased, and intend to standardize on the 12E model of the device. I see that the 4E and the 24E are Observium supported devices (to some degree). Who can I hire to get the 12E inserted supported by Observium at the current MIB version as provide by AVTech? Philippe

3 2

Moving Observium
by William Bauer 29 Dec '16

29 Dec '16

So I have my new CentOS7 system ready to go, moving from a CentOS6 VM. I thought I'd found it before, but I can't find instructions for moving observium to a different system (same x86_64 architecture). I can move the RRDs, but isn't there more to it, like migrating mysql data? I've looked through the documentation. Perhaps I'm just looking for the wrong text. Any links someone can point to, or instructions for moving from one host to another? Thanks. Bill

6 15

Question about port tags.
by Sander Koorneef 28 Dec '16

28 Dec '16

Hi guys, I have two ports in my environment with some tags on it. Observium recognizes it as a Customer and some other details. But the thing is; one port is a stacking port without label (1/2/3, what you don't see), and the other one is disabled and also without a label. Maybe I overlooked something. Never created the labels in the first place. The question: how can I clean this up? I can remember that this popped up after a upgrade recently, but cannot remember the version of it :( [cid:86df4c60-7d68-4e23-a87a-19e8b881c859] [cid:a5013af3-87a3-48b2-8ece-5fb44f33ee4f] Running Observium 0.16.11.8262 (27th November 2016) Rolling. With kind regards, Sander Koorneef

4 10

Serverscheck with Observium
by Idzma Zakaria 28 Dec '16

28 Dec '16

Hi All , The last version of Observium v0.16.11.8249 Im unable to grep all of my sensors unlike previous version 0.16.5. Is there any tweak should be done so that I can retrieved all of my sensors ? -- Kind regards, Idzma Zakaria, ICT Senior Executive ---------------------------------------------------------------------------------------------------------- Australian International School Malaysia (AISM) No.22 Jalan Anggerik, The Mines Resort City, 43300 Seri Kembangan, Selangor, Malaysia. *T:* +60 3 8949 5000 *F*: +60 3 8949 5100 *E*: idzmaz(a)aism.edu.my *W*: http://www.aism.edu.my/ *Direct Line*: ---------------------------------------------------------------------------------------------------------- <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

3 10

Observium Polling via SSH
by Cailean Keniston 28 Dec '16

28 Dec '16

Hi All, I have an environment that uses Observium but a lot of our systems that we need to keep track of and poll are having ICMP echo requests turned off which makes polling a little difficult. So after making backup copies of the files I am starting to make a module that polls via SSH. Currently it's in the "works under conditions X" stage and I had to bake it into some of the includes code (hence the copies). I guess my main question is this something anyone is interested in being submitted as an option? I'm currently working on the ability to make it more of an automated process, and set up a flag that toggles whether the poller works with ping or ssh. But, if this is so niche that it's not really something cares about then cool, but I thought I would ask in case it could be a useful feature to add for others? And, if it is something that might seem useful then if there's a preferred method of adding it over putting it directly into the existing code I'm perfectly willing to go that route instead so I'm not messing with anyone's flow. Thanks, Cailean

2 1

Error
by Jason Vanlandingham 27 Dec '16

27 Dec '16

First time I've seen this. It showed up once today, and once on 24 Nov. I would expect an error like this to happen every time this ran or not at all. What is this? Executable '/opt/observium/poller-wrapper.py' doesn't belong to any package and ProcessUnpackaged is set to 'no'

3 4

Observium: sensor class question
by David Schrok 27 Dec '16

27 Dec '16

Hi all, Question: Is there a way to map a sensor to another sensor class? Currently I have a sensor that shows up as a temperature sensor which in fact is a humidity sensor. Would be great if I can map the sensor or OID value as humidity. With kind regards, David Disclaimer ( http://www.avans.nl/over-avans/e-mail-disclaimer )

4 5

Re: [Observium] Updates to CentOS7 instructions?
by Max Krabbenhöft 26 Dec '16

26 Dec '16

Had problems with this a few months back too. Used this thread to get rpms working again. https://github.com/repoforge/rpms/issues/375 /Max On Dec 22, 2016 07:47, William Bauer <bbauer(a)scripps.edu> wrote: I'm replacing a poorly performing VM running CentOS6 with a real computer running CentOS7. The two commands (listed below) early on in the CentOS7 instructions appear to be invalid. I'm not super Linux literate as I know more of the BSD and Solaris worlds. Are there replacement sources for these? Here are the ones currently failing (I've tried no more of the instructions). I suppose these could be only temporary failures: rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt rpm -Uvh http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el7.rf.… Any help is appreciated. Bill _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 3

atime necessary?
by William Bauer 24 Dec '16

24 Dec '16

Being a BSD and Solaris guy (ZFS for years!), I brought up my new Observium installation putting mariadb on one ZFS mirror, and Observium on another. One thing that can improve performance is by disabling the atime attribute on a filesystem. Does Observium or mysql/mariadb care about this, or can I safely disable it on either or both filesystems? It won't impact the normal timestamps, just the tracking of the last access time of individual files. Thanks again.

2 1

Re: [Observium] Moving Observium
by Cody Cook 22 Dec '16

22 Dec '16

https://www.digitalocean.com/community/tutorials/how-to- migrate-a-mysql-database-between-two-servers That creates and migrates a database. You will also need to add and give permissions for a user on your new MySQL server. The installation instructions should explain how that's done since it is the same commands. Then update the config file for Observium to match your new setup. This is probably a basic skill you should know outside of using Observium. On Dec 22, 2016 1:15 PM, "William Bauer" <bbauer(a)scripps.edu> wrote: > Are there instructions somewhere for moving Observium? I don't know how > to migrate mysql. I was hoping there are concise Observium instructions, > much like the excellent install page. > ------------------------------ > *From:* Cody Cook > *Sent:* Thu Dec 22 13:07:30 PST 2016 > *To:* Observium Network Observation System > *Subject:* Re: [Observium] Moving Observium > > You'll need to also migrate and redirect your MySQL database too. > > On Dec 22, 2016 12:45 PM, "William Bauer" <bbauer(a)scripps.edu> wrote: > >> So I have my new CentOS7 system ready to go, moving from a CentOS6 VM. I >> thought I'd found it before, but I can't find instructions for moving >> observium to a different system (same x86_64 architecture). I can move the >> RRDs, but isn't there more to it, like migrating mysql data? >> >> I've looked through the documentation. Perhaps I'm just looking for the >> wrong text. Any links someone can point to, or instructions for moving >> from one host to another? >> >> Thanks. >> >> Bill >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > ------------------------------ > NOTE: This message was trained as non-spam. If this is wrong, please > correct the training as soon as possible. > > > > ------------------------------ > > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >

1 0

Updates to CentOS7 instructions?
by William Bauer 22 Dec '16

22 Dec '16

I'm replacing a poorly performing VM running CentOS6 with a real computer running CentOS7. The two commands (listed below) early on in the CentOS7 instructions appear to be invalid. I'm not super Linux literate as I know more of the BSD and Solaris worlds. Are there replacement sources for these? Here are the ones currently failing (I've tried no more of the instructions). I suppose these could be only temporary failures: rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt rpm -Uvh http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el7.rf.… Any help is appreciated. Bill

1 0

Wireless Networks
by Stef Renders 20 Dec '16

20 Dec '16

Hi All, We recently started adding customer's wireless environments in our Observium installation. I'm not sure whether this was ever available, but I can tell that observium is discovering my SSID's since I can see them in the database, however, I don't seem to find any reference to them in the interface. Anyone has an idea how far this was ever implemented ? Our customer is using Ruckus. And it seems only the wifi_wlans table is being populated: Kind regards

2 1

suppress tiles on front page
by Vater, Wolfgang 20 Dec '16

20 Dec '16

Hi there, I created alerts for port errors and discards to be notified if there are more than 25. But on my front page I get a tile for each port with port errors, even if it is only 1 error. Is this customizable? I would like to be able to suppress this for ports where I know this happens but can't do anything about it (because someone else doesn't want to fix their device), or raise the threshold so something higher than 1? Wolfgang Wolfgang Vater | Lead Client Architect | Enterprise Services Unisys Deutschland GmbH | +49 162 255 9338 | wolfgang.vater(a)unisys.com | Philipp-Reis-Str. 2 | 65795 Hattersheim [unisys_logo]<http://www.unisys.com/> Unisys Deutschland GmbH | Geschäftsführer: Sandro Lindner & Dr. Uwe Heckert | Sitz der Gesellschaft: Hattersheim | Amtsgericht: Frankfurt/Main HRB 7929 THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE PROPRIETARY MATERIAL and is thus for use only by the intended recipient. If you received this in error, please contact the sender and delete the e-mail and its attachments from all computers. DIESE E-MAIL IST AUSSCHLIESSLICH FÜR DEN ADRESSATEN BESTIMMT UND KANN VERTRAULICHE INFORMATIONEN ENTHALTEN. Sollten Sie nicht der Adressat dieser Informationen sein, bitten wir Sie, sich mit dem Absender in Verbindung zu setzen und die Informationen von Ihren Endgeräten zu entfernen. [Grey_LI]<http://www.linkedin.com/company/unisys> [Grey_TW] <http://twitter.com/unisyscorp> [Grey_GP] <https://plus.google.com/+UnisysCorp/posts> [Grey_YT] <http://www.youtube.com/theunisyschannel> [Grey_FB] <http://www.facebook.com/unisyscorp> [Grey_Vimeo] <https://vimeo.com/unisys> [Grey_UB] <http://blogs.unisys.com/>

3 4

2 x feature request : Avoiding multiple entries for same devices & subgroups
by Jesper Frank Nemholt 20 Dec '16

20 Dec '16

Hi! 1. Especially with autodiscovery I get the same devices created multiple times as the hostname differ and Observium don't seem to always properly identify that the sysName and SNMP ID is the same. What I end up with is either the same device being in there twice. I also have this issue on some solutions using clustering and internal DNS & DHCP so nodes can have multiple IPs and DNS names and change these over time so the only constant is SNMP sysName and SNMP ID. What I am doing now as a workaround is to disable all but one entry per device when I see these duplicates, but it would be great to either have a better check to avoid this from the very beginning, or potentially to have something like what is present for syslog host mapping to allow a N to 1 mapping of devices like : $config['device']['host_map']['foo.bar'] = 'bar.foo'; // device hostname/sysname $config['device']['host_map']['foo.bar'] = 'foo.foo'; // device hostname/sysname With something like this in config.php I could then delete the duplicate entries and they would not be auto discovered again, and I'd avoid having to disable them. 2. The other thing is that it would be great if it was possible to create subgroups for devices, ports and custom OIDs. When having lots of groups for different areas or lots of custom OIDs it quickly gets crowded and having the ability to organize these in a group hierachy would be great, similar to how locations are grouped by country when using geo-coding. /Jesper

2 2

Software raid
by Simon Mousey Smith 20 Dec '16

20 Dec '16

Hi All, Daft question, we have a voip server with software raid in (FreePBX) Does Observium monitor the software raid? I see in the Observium_agent script it does ‘cat /proc/mdstat’ But what does it do? I can’t see any graphs or sensors for the raid? Only the md IO graphs? Regards Simon

3 2

trial observium
by ridwanfi 20 Dec '16

20 Dec '16

hi all, has been using observium for few days and we need to test the trial alert or notification, i know you guys don't provide trial license http://observium.observium.narkive.com/Ra0jsd8Z/professional-version-on-tri… hence if i need to buy subscription or contact sales team whom should I wrote to rgds Ridwan

2 1

NET ISO Routing support
by ecmp 20 Dec '16

20 Dec '16

NET ISO Routing support, debain 8 install, Observium CE 0.16.10.8128 Hi, I'm having trouble getting ISIS to work in observium. I apoligize if this has already been a topic in the email archive, but I was unable to view the archive and I couldn't find anything online relating to this. bgp, ospf, eigrp are all show in the edit-->routing section of the webui. Not ISIS. I know under poller discover modules these exist // Poller/Discovery Modules $config['enable_bgp'] = 1; // Enable BGP session collection and display $config['enable_rip'] = 1; // Enable RIP session collection and display $config['enable_ospf'] = 1; // Enable OSPF session collection and display $config['enable_isis'] = 1; // Enable ISIS session collection and display $config['enable_eigrp'] = 1; // Enable EIGRP session collection and display $config['enable_syslog'] = 0; // Enable Syslog $config['enable_vrfs'] = 1; // Enable VRFs $config['enable_sla'] = 1; // Enable SLA/RPM collection and display $config['enable_pseudowires'] = 1; // Enable Pseudowires digging a bit further, I found that uncommenting this section of the file ./includes/config-variables.inc.php would enable this setting on the webui. However isis data is still not collected and does not show up under device>routing. /// ROUTING ////////////////////////////////////////////////////////// $config_sections['routing']['text'] = "Routing"; $setting = 'enable_isis'; $config_variable[$setting]['section'] = "routing"; $config_variable[$setting]['subsection'] = "Protocols"; $config_variable[$setting]['name'] = "ISIS sessions"; $config_variable[$setting]['type'] = "bool"; $config_variable[$setting]['shortdesc'] = "Enable collection and display of ISIS data."; one thing I noticed is the bgp, ospf, and eigrp all have the name set to "<protocol> collection" while rip and isis have the name "<protocol> sessions." Finding these settings without a comment like "/* Unimplemented :)" makes me think that ISIS is supported, however I can't seem to find an existing module to support it within the CE. a quick grep of the observium directories seems to show that isis is lacking a poller module like: ./includes/polling/cisco-eigrp.inc.php ./includes/polling/ospf.inc.php ./includes/discovery/bgp-peers.inc.php grep -r 'isis' . (with a lot of output ommited) ./tests/HtmlIncludesFunctionsTest.php: array('isis', 'IS-IS'), ./includes/config-variables.inc.php:$setting = 'enable_isis'; ./includes/defaults.inc.php:$config['enable_isis'] = 1; // Enable ISIS session collection and display ./includes/definitions.inc.php:$config['routing_types']['isis'] = array('text' => 'ISIS'); Does anyone have ISIS working in observium? If so how? Thanks.

2 3

Problem with MIBs
by Xavier Bonell 16 Dec '16

16 Dec '16

Hello; I recently have installed the Community version of Observium on a CentOS 7 server, to test the functionalities and the configurations that gives; to decide if I it's worth to purchase for the Professional one. My question is about how can I select wich MIBs is going to use to obtain data. Because when I go to Devices -> Select Device -> Properties -> MIBs I find a list of MIBs that are used but not suitable for my device. How can I change it? Entering through the server's folders I have seen that are the MIBs that I need. How can I run it to get the appropiate data? Thanks!

2 3

Unable to sort rows by the last column for some data types
by Andy Lemin 15 Dec '16

15 Dec '16

Hi, At the risk of embarrassing myself again and making you laugh, for an obvious typo.. ;) And yes I have definitely checked this time I discovered this weekend that it is not possible to view some of the "Heath" charts in a sorted order. For example, Heath -> Temperature -> Click "Value". The rows seem to be sorted randomly for us. Is anyone else seeing this too? The following also all have the same problem 1) Health -> Processor -> Click "Processor" to sort by processor name, results in random sorting 2) Health -> Memory -> Click "Memory" to sort by Memory name, results in random sorting 3) Health -> Memory -> Click "Used" to sort by Used, results in very random sorting 4) Health -> Temperature -> Click "Value" to sort by temp, results in very random sorting 5) Health -> Fanspeed -> Click "Value" to sort by temp, results in very random sorting 6) Health -> Power -> Click "Value", results in random sorting Cheers, Andy.

4 5

Alerts not being sorted chronological manner
by Youssef BENGELLOUN - ZAHR 14 Dec '16

14 Dec '16

1 2

How to remove unwanted ports
by Ivan Biasi 14 Dec '16

14 Dec '16

Hi all is it possible to remove, or hide, from the "Ports" panel of a device the interfaces for which the polling was disabled ? Thanks, regards I. -- ing. Biasi Ivan Area Ingegneria di Rete Direzione Servizi e Reti TRENTINO NETWORK S.R.L. Via G.Pedrotti, 18 – 38121 - TRENTO Tel : (+39) 0461.020222 Fax : (+39) 0461.020201 Email: ivan.biasi(a)trentinonetwork.it Skype: ivanbiasi https://www.linkedin.com/in/ivanbiasi ________________________________________________________________________________ Società soggetta a direzione e coordinamento da parte della Provincia Autonoma di Trento. REG. IMP. C.F. e P. IVA 01904880224 ________________________________________________________________________________ CONFIDENZIALE: Questo messaggio e gli eventuali allegati sono confidenziali e riservati. Se vi è stato recapitato per errore e non siete fra i destinatari elencati, siete pregati di darne immediatamente avviso al mittente. Le informazioni contenute non devono essere mostrate ad altri, nè utilizzate, memorizzate o copiate in qualsiasi forma. CONFIDENTIAL: This e-mail and any attachments to it may be confidential and may contain private and confidential information. If you are not the intended recipient of this email please notify the sender immediately. Moreover, you must not disclose or distribute its contents to anyone nor copy, store or use its contents in any way.

1 0

Power Supply Status Alarm Check
by Sebastian Klute 14 Dec '16

14 Dec '16

Hi there, I'm getting a bit confused while trying to create an alarm checker for power supply. So it's located under Status with physical class powersupply. Using the actual name would be worthless if this changes. What I want to check is the status of the status. Meaning running or not. I would go for status_type "powersupply" and status_event "running". If this is not true then give me an alarm. But I'm very unsure about the status_type and the correct one to check be cause an event could be "OK" or "FAIL" as well. The purpose is to track if any of the power supplys of our switches fails, so you can do an exchange before the whole switch goes offline. Hope anyone can help me with that. Best regards Sebastian Klute -- Accelerated IT Services GmbH Kruppstraße 105 - 60388 Frankfurt - Germany sk(a)accelerated.de - http://www.accelerated.de/ Phone: +49 69 - 900 180 41 - Fax: +49 69 - 900 180 90 HRB: 60665 - Amtsgericht Ludwigshafen - VatID: DE253684415 Managing Directors: Nicolaj Kamensek & Ole Krieger

1 0

Alert not working
by Eduardo Schoedler 13 Dec '16

13 Dec '16

Hi, I'm not understanding why this alert isn't working. [image: Imagem inline 2] BGP Session state: [image: Imagem inline 1] Thank you. Regards, -- Eduardo Schoedler

3 6

Re: [Observium] OpsGenie Observium Integration
by Halit Okumuş 09 Dec '16

09 Dec '16

Hi Adam, The current integration was made, months ago, according to your old webhook content. And there are existing, in-use configurations in OpsGenie at the moment. We can't just throw them away and change that, can we? That's why we suggested the webhook content before. I don't care how crappy your payload was, we're just trying to make use of the two products together. Alright, cooling down, we can do a rewrite. We'll make a V2 integration which will make use of the fields you mentioned and deprecate our old one. Can you send an example of that request to http://4kmm916oxm9m.runscope.net ? Cheers, Halit On Mon, Dec 5, 2016 at 3:37 PM, Çağla Arıkan <cagla(a)opsgenie.com> wrote: > > > Begin forwarded message: > > *From: *"Adam Armstrong" <adama(a)memetic.org> > *Subject: **Re: [Observium] OpsGenie Observium Integration* > *Date: *5 December 2016 at 15:33:44 GMT+3 > *To: *"" <observium(a)observium.org> > *Reply-To: *Observium Network Observation System <observium(a)observium.org> > > Oh god. I hate when you start looking through contributed code and realise > it was written by someone who hadn't even bothered to make sure it does > what it's supposed to do. > > At the moment the integration sends this payload : > > $payload = array( > "apiKey" => $endpoint['api_key'], > "message" => $message_tags['TITLE'], > "description" => $message_tags['METRICS'] . PHP_EOL . PHP_EOL . > 'Conditions: '. PHP_EOL . $message_tags['CONDITIONS'], > "alias" => $message_tags['ALERT_ID'], > "entity" => $message_tags['DEVICE_HOSTNAME'], > "source" => php_uname('n'), > "details" => array( > "Alert URL" => $message_tags['ALERT_URL'], > "Duration" => $message_tags['DURATION'], > "Hardware" => $message_tags['DEVICE_HARDWARE'], > "OS" => $message_tags['DEVICE_OS'], > "Location" => $message_tags['DEVICE_LOCATION'], > ), > ); > > We're able to supply these fields from our alerting code : > > 'ALERT_STATE' > 'ALERT_URL' > 'ALERT_ID' > 'ALERT_MESSAGE' > 'CONDITIONS' > 'METRICS' > 'DURATION' > 'ENTITY_LINK' > 'ENTITY_NAME' > 'ENTITY_TYPE' > 'ENTITY_DESCRIPTION' > 'ENTITY_GRAPHS_ARRAY' // Json encoded images array > 'DEVICE_HOSTNAME' > 'DEVICE_LINK' > 'DEVICE_HARDWARE' > 'DEVICE_OS' > 'DEVICE_LOCATION' > 'DEVICE_UPTIME' > > The existing integration doesn't seem to provide the actual entity being > alerted information in a useful manner, so could probably do with being > rewritten itself so we can better match the capabilities of the two > platforms. > > adam. > > On 05/12/2016 12:24:21, Adam Armstrong <adama(a)memetic.org> wrote: > Please don't use the generic webhook crap. There's a reason it's marked as > "(Old)" now. > > I get 400 bad request when using either of those URLs. Our OpsGenie > integration (which was contributed a couple of weeks ago) currently sends : > > {"recipients":"","api_key":"2f79c4d5-7c26-4429-8e5b-6e2b936800cc"} > {"apiKey":"2f79c4d5-7c26-4429-8e5b-6e2b936800cc","message":"RECOVER: [ > omega.memetic.org] [processor] [Average] Processor usage is above > 80%","description":"processor_usage = 40\n\nConditions: > \n","alias":"46864","entity":"omega.memetic.org","source":"o > mega.memetic.org","details":{"Alert URL":"http:\/\/dev.observium.org:80 > \/device\/device=12\/tab=alert\/alert_entry=46864\/","Duration":"1m 26s > (2016-12-05 13:20:00)","Hardware":"Generic x86 [64bit]","OS":"Linux > 3.13.0-96-generic Ubuntu 14.04","Location":"Hetzner, Nuremberg, Germany"}} > > Trying to parse an arbitrary text field is a really bad idea when we can > provide that data in separate fields. > > adam. > > On 05/12/2016 12:18:29, Çağla Arıkan <cagla(a)opsgenie.com> wrote: > When you change the URL, the integration will work properly. To make the > integration work properly, we should get the same payload that you send for > generic webhook integration this can be found below: > > { > "originator": "observium sender", > "body": "ALERT: [localhost] [device] device is down\ndevice_status = 0" > } > > We will fix the documents as you described. > > Thanks, > Çağla Arıkan > > On 5 Dec 2016, at 15:12, Adam Armstrong <adama(a)memetic.org> wrote: > > The description for the "add integration" part of OpsGenie also references > to deprecated generic webhook from Observium. Please don't use that. > > Please rewrite your integration to use the specific OpsGenie integration > we provide. > > adam. > > On 05/12/2016 12:03:49, Çağla Arıkan <cagla(a)opsgenie.com> wrote: > Hi there, > > I am a software engineer at OpsGenie. We have developed an integration > specific to Observium. Thus, we would be very pleased if you can fix your > integration so that it uses /v1/json/observium endpoint rather than > /v1/json/alert endpoint. Observium Integration works similar to generic > Webhook integration but we customised it for Observium. You can check our > Observium Integration document for more information which can be found at > https://www.opsgenie.com/docs/integrations/observium-integration. > > Best Regards, > Çağla Arıkan > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > >

3 3

Router stopped polling via Observium
by Youssef BENGELLOUN - ZAHR 06 Dec '16

06 Dec '16

3 7

Weathermap module for observium
by Youssef BENGELLOUN - ZAHR 06 Dec '16

06 Dec '16

6 9

Question about port desr on Fortigate
by MORDAC, Benoit 06 Dec '16

06 Dec '16

Hi, I'm using the Observium professional edition, and I monitor a lot of things, including some Fortigate firewalls. I have upgraded one of them from FortiOS 5.2.x to 5.4.2 release, After this upgrade, observium don't show interfaces names or description. When calling the discovery.php script we should see the port name. ##### Module Start: ports ##### o Caching OIDs ifDescr ifAlias ifName ifType ifOperStatus o Caching DB 46 ports o Discovering ports .............................................. +---------+---------+----------+----------+----------+-------------+---------+ | ifIndex | ifDescr | ifName | ifAlias | ifType | Oper Status | Ignored | +---------+---------+----------+----------+----------+-------------+---------+ | 1 | ... | port1 | ... | ethernet | up | no | | | | | | Csmacd | | | | 2 | ... | port2 | ... | ethernet | down | no | | | | | | Csmacd | | | | 3 | ... | port3 | ... | ethernet | up | no | | | | | | Csmacd | | | ... But it's not visible in the web UI. Maybe it's possible to force Observium to use ifName instead of ifDescr attribute ? I have made a "svn update" on my observium install, the problem is still present. Thanks for your help. Best Regards,

3 2

Intel True Scale Fabric Switch 12800 support
by Jesper Frank Nemholt 05 Dec '16

05 Dec '16

Hi! I wonder if anyone are working on adding support for these devices ? They are QLogic (now Intel) InfiniBand switches and are used on most larger Isilon clusters. The OID is enterprises.10222 I've previously monitored Mellanox IB switches like the SX6036 and these have a good integration, but the Intel ones only report on the management interfaces and nothing else....and I prefer not to spend a day adding support myself if someone else already have done most of the work. snmpwalk -v 2c -c public foo.bar system SNMPv2-MIB::sysDescr.0 = STRING: Intel True Scale Fabric Switch 12800-040 (Master) SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.10222.7.1.2 DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (30516852) 3 days, 12:46:08.52 SNMPv2-MIB::sysContact.0 = STRING: SNMPv2-MIB::sysName.0 = STRING: QLogic 12800-040-254 SNMPv2-MIB::sysLocation.0 = STRING: Main Chassis Unit, Slot 254 SNMPv2-MIB::sysServices.0 = INTEGER: 79 SNMPv2-MIB::sysORLastChange.0 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORID.1 = OID: SNMPv2-SMI::mib-2 SNMPv2-MIB::sysORID.2 = OID: SNMPv2-SMI::mib-2.17 SNMPv2-MIB::sysORID.3 = OID: SNMPv2-MIB::snmpMIB SNMPv2-MIB::sysORID.4 = OID: IF-MIB::ifMIB SNMPv2-MIB::sysORID.5 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIB SNMPv2-MIB::sysORID.6 = OID: SNMP-MPD-MIB::snmpMPDMIB SNMPv2-MIB::sysORID.7 = OID: SNMP-TARGET-MIB::snmpTargetMIB SNMPv2-MIB::sysORID.8 = OID: SNMP-NOTIFICATION-MIB::snmpNotificationMIB SNMPv2-MIB::sysORID.9 = OID: SNMPv2-SMI::transmission.7 SNMPv2-MIB::sysORID.10 = OID: SNMPv2-SMI::mib-2.17.6 SNMPv2-MIB::sysORID.11 = OID: SNMPv2-SMI::mib-2.17.7 SNMPv2-MIB::sysORDescr.1 = STRING: RFC 1213 - (AT, IP, ICMP, TCP, UDP groups) SNMPv2-MIB::sysORDescr.2 = STRING: RFC 1493 - BRIDGE-MIB SNMPv2-MIB::sysORDescr.3 = STRING: RFC 1907 - SNMPv2-MIB (SYSTEM, SNMP) SNMPv2-MIB::sysORDescr.4 = STRING: RFC 2233 - IF-MIB (IF) SNMPv2-MIB::sysORDescr.5 = STRING: RFC 2571 - SNMP-FRAMEWORK-MIB SNMPv2-MIB::sysORDescr.6 = STRING: RFC 2572 - SNMP-MPD-MIB SNMPv2-MIB::sysORDescr.7 = STRING: RFC 2573 - SNMP-TARGET-MIB SNMPv2-MIB::sysORDescr.8 = STRING: RFC 2573 - SNMP-NOTIFICATION-MIB SNMPv2-MIB::sysORDescr.9 = STRING: RFC 2665 - EtherLike-MIB SNMPv2-MIB::sysORDescr.10 = STRING: RFC 2674p - P-BRIDGE-MIB SNMPv2-MIB::sysORDescr.11 = STRING: RFC 2674q - Q-BRIDGE-MIB SNMPv2-MIB::sysORUpTime.1 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.2 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.3 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.4 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.5 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.6 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.7 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.8 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.9 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.10 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.11 = Timeticks: (1883) 0:00:18.83 /Jesper

1 0

OpsGenie Observium Integration
by Çağla Arıkan 05 Dec '16

05 Dec '16

Hi there, I am a software engineer at OpsGenie. We have developed an integration specific to Observium. Thus, we would be very pleased if you can fix your integration so that it uses /v1/json/observium endpoint rather than /v1/json/alert endpoint. Observium Integration works similar to generic Webhook integration but we customised it for Observium. You can check our Observium Integration document for more information which can be found at https://www.opsgenie.com/docs/integrations/observium-integration <https://www.opsgenie.com/docs/integrations/observium-integration>. Best Regards, Çağla Arıkan

2 5

Interface errors Observium Subscription version
by Afzaal Shabbir 03 Dec '16

03 Dec '16

Dear All, Will it be possible for anyone to help me understand about attached error message on Access Points Wifi interfaces, what they mean and how to fix these errors or where to look for answers regarding these errors. Both interface graphs attached. These are graphs unifi access points wifi0 and wifi1 interfaces. There are no error messages on it's physical interface. Thanks, A

1 0

Minute storage changes causing storm of "Storage Size Change" messages
by Cody Cook 03 Dec '16

03 Dec '16

I am on 0.16.12.8277 and noticed that I am getting new alerts on the eventlog. Just this week alone, there are 82.8k items about storage changing. My volumes are generally zfs with many subvolumes, and as a result, all entries are coming up in the eventlog. This also wipes away any other important changes that might be overlooked. [image: Inline image 1]

1 0

OpenConfig Telemetry?
by Johann Mallet 02 Dec '16

02 Dec '16

Hello, Do you know if exist an plan for integrate Openconfig Telemetry in Observium in the future? A few reference links: http://www.openconfig.net/projects/streaming-telemetry/ https://github.com/openconfig/reference/tree/master/telemetry Juniper (and Cisco?) will integrate this technology in the next release. Thanks! Johann

1 0

No polling
by Martin Snygg 02 Dec '16

02 Dec '16

Hi I just discovered that my install stopped polling since a couple of days, I think it´s because a svn switch I did. When running the poller-wrapper.py I get the following: Traceback (most recent call last): File "./poller-wrapper.py", line 306, in <module> if instances_count > 1 and instance_number >= 0 and (instance_number < instances_count): NameError: name 'instances_count' is not defined Where do I define "instance_count" and how? /Martin Snygg

3 13

Memory alerting false positives
by Musall, Maik 01 Dec '16

01 Dec '16

Hi, I have an alert on a linux server configured for "mempool_perc gt 90", which is firing all the time because of irrelevant caching use. Memory on Linux is always used. I'm more interested in the orange part of this graph: The device is called ucd_memory. Is there a metric I can use to get the value that's at 61% in this graph, to catch spikes like the one at 14:00 time? Thanks Maik

2 1

Re: [Observium] poller duration
by Youssef BENGELLOUN - ZAHR 01 Dec '16

01 Dec '16

5 5

poller duration
by Vater, Wolfgang 01 Dec '16

01 Dec '16

Is there a way to see which module is taking all the time when polling a device? I have Nexus 5000 switches with lots of ports, so I assume it the ports that take most of the time, but I would like to see what else takes a lot of time and if I can live without that information and disable the polling for it (like fdbcount). My N5Ks take 400 sec on average. Wolfgang Vater | Lead Client Architect | Enterprise Services Unisys Deutschland GmbH | +49 162 255 9338 | wolfgang.vater(a)unisys.com | Philipp-Reis-Str. 2 | 65795 Hattersheim [unisys_logo]<http://www.unisys.com/> Unisys Deutschland GmbH | Geschäftsführer: Sandro Lindner & Dr. Uwe Heckert | Sitz der Gesellschaft: Hattersheim | Amtsgericht: Frankfurt/Main HRB 7929 THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE PROPRIETARY MATERIAL and is thus for use only by the intended recipient. If you received this in error, please contact the sender and delete the e-mail and its attachments from all computers. DIESE E-MAIL IST AUSSCHLIESSLICH FÜR DEN ADRESSATEN BESTIMMT UND KANN VERTRAULICHE INFORMATIONEN ENTHALTEN. Sollten Sie nicht der Adressat dieser Informationen sein, bitten wir Sie, sich mit dem Absender in Verbindung zu setzen und die Informationen von Ihren Endgeräten zu entfernen. [Grey_LI]<http://www.linkedin.com/company/unisys> [Grey_TW] <http://twitter.com/unisyscorp> [Grey_GP] <https://plus.google.com/+UnisysCorp/posts> [Grey_YT] <http://www.youtube.com/theunisyschannel> [Grey_FB] <http://www.facebook.com/unisyscorp> [Grey_Vimeo] <https://vimeo.com/unisys> [Grey_UB] <http://blogs.unisys.com/>

2 1

Active Directory LDAP Group Recursive Lookups
by Chip Pleasants 30 Nov '16

30 Nov '16

Hi all, We are having trouble with LDAP group recursive lookups in Active Directory. We are wondering how to configure Observium if in Active Directory we put another Active Directory group and if the group inside does not live under the current groupbase. Below is a example. I've set auth_ldap_recursive_maxdepth to 3. I tried adding the group and adjusting the groupbase together as well as individually without luck. Do we need to add that group to Observium? Is this sort of thing supported? Is there anything I can provide that may help? Current $config['auth_ldap_group'] = array("CN=Observium Admin,OU=Apps,OU=Security,DC=corp,DC=company,DC=net"); $config['auth_ldap_groupbase'] = "OU=Apps,OU=Security,DC=corp,DC=company,DC=net"; Future $config['auth_ldap_group'] = array("CN=Observium Admin,OU=Apps,OU=Security,DC=corp,DC=company,DC=net",CN=DEPT,OU=POOP,OU=Security,DC=corp,DC=company,DC=net"); $config['auth_ldap_groupbase'] = "OU=Security,DC=corp,DC=company,DC=net"; Thanks, -Chip

1 0

DB errors showing up while creating alerts
by Kaya Saman 30 Nov '16

30 Nov '16

Hi, I'm not sure if my DB has become corrupted over time however, I am trying to configure a few alert checks and hitting these errors: [2016/11/29 18:34:14 +0000] discovery.php(68468): Failed dbQuery (#1054 - Unknown column 'ifType' in 'where clause'), Query: SELECT * FROM `devices` WHERE device_id = '6' AND `ifType` = 'ethernetCsmacd' [2016/11/29 18:34:24 +0000] discovery.php(68468): Failed dbQuery (#1054 - Unknown column 'mempool_descr' in 'where clause'), Query: SELECT * FROM `devices` WHERE device_id = '32' AND IFNULL(`mempool_descr`, "") LIKE '%processor' [2016/11/29 18:34:24 +0000] discovery.php(68468): Failed dbQuery (#1054 - Unknown column 'ifType' in 'where clause'), Query: SELECT * FROM `devices` WHERE device_id = '32' AND `ifType` = 'ethernetCsmacd' [2016/11/29 18:34:35 +0000] discovery.php(68468): Failed dbQuery (#1054 - Unknown column 'mempool_descr' in 'where clause'), Query: SELECT * FROM `devices` WHERE device_id = '9' AND IFNULL(`mempool_descr`, "") LIKE '%processor' [2016/11/29 18:34:35 +0000] discovery.php(68468): Failed dbQuery (#1054 - Unknown column 'ifType' in 'where clause'), Query: SELECT * FROM `devices` WHERE device_id = '9' AND `ifType` = 'ethernetCsmacd' [2016/11/29 18:34:47 +0000] discovery.php(68468): Failed dbQuery (#1054 - Unknown column 'mempool_descr' in 'where clause'), Query: SELECT * FROM `devices` WHERE device_id = '1' AND IFNULL(`mempool_descr`, "") LIKE '%processor' [2016/11/29 18:34:47 +0000] discovery.php(68468): Failed dbQuery (#1054 - Unknown column 'ifType' in 'where clause'), Query: SELECT * FROM `devices` WHERE device_id = '1' AND `ifType` = 'ethernetCsmacd' in the logs/db.log file. Do I need to create the columns that it is asking for or is there something else that needs to be done? Thanks. Kaya

2 2

Salvo of false alerts
by Youssef BENGELLOUN - ZAHR 30 Nov '16

30 Nov '16

4 10

Real-time graphing for a group of ports
by Youssef BENGELLOUN - ZAHR 30 Nov '16

30 Nov '16

1 0

Sensor added then deleted every 5mins
by Simon Mousey Smith 30 Nov '16

30 Nov '16

Hi All Has anybody had this issue at all? I use the hddtemp script to get the temperature of two hdds, now it seems the sensors keeps being added then deleted every 5mins? One min its one hdd the next its another, it never makes up its mind? Any ideas? Regards Simon

1 0

Problem with make graphs on ports
by Janusz Janik 30 Nov '16

30 Nov '16

Good morning, I have problem with making graphs on ports. Observium recognize one of device as: ZXR10 ROS Version V4.6.02A ZXPON C300 Software, Version V2.6.02A.21 Copyright (c) 2000-2006 by ZTE Corporation Compiled Feb 4 2013, 03:49:41 It looks like most of ports do not gathering data: MAC addres is not showing up and traffic is displayed like 0bps. But real traffic exists on these ports. This instance of observium contains more devices. Problems exist on two devices with 72 ports. The other two devices have 48 and 24 ports, and generally traffic has draw properly on these devices. We suspect the key is too big number of ports on single device and observium doesn't "know" what is going on. We use observium community edition Observium CE 0.16.10.8128 (6th October 2016) I attach log from poller: ./poller.php -i 4 -n 1 -dd > /home/janix/poller.log in file. This device is the most important. We can send more log files if it will be necessary. Best regards, Janusz Janik -- Pozdrawiam, Janusz Janik http://idhosting.pl/

2 1

ESX 6.0u2 Guest VM list not populating
by Richard Wigzell 29 Nov '16

29 Nov '16

Hello, have an issue with an ESX 6.0u2 host not populating its list of VM Guests. Have run discovery.php with debug, relevant output below. Seems the host is not returning any values for vmwVmTable. Has anyone come across this issue? Suggestions welcome. ##### Module Start: virtual-machines ##### Virtual machines: VMWARE-VMINFO-MIB CMD[/usr/bin/snmpbulkwalk -v2c -c *** -Pu -OQUs -m VMWARE-VMINFO-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/vmware 'udp':'SOMEHOST':'161' vmwVmTable] CMD EXITCODE[0] CMD RUNTIME[0.0065s] STDOUT[vmwVmTable = No Such Object available on this agent at this OID] SNMP STATUS[FALSE] SNMP ERROR[#1000 - Failed response] SQL[SELECT * FROM `vminfo` WHERE `device_id` = '306' AND `vm_source` = 'vmware-snmp'] SQL RUNTIME[0.00012398s] o Duration 0.0089s Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

2 1

Failed dbQuery
by Chip Pleasants 29 Nov '16

29 Nov '16

Hi all, We just upgrade Observium Pro version from 5565 to 8181 a few days. Everything seems to be working from we can tell, although since the upgrade we noticed this message in the db.log. It occurs for multiple devices. We are running Ubuntu 12.04.5. I'm wondering if it is because we are running PHP is 5.3? Has anyone seen this message after upgrading? It would nice to have some idea about the error message before we upgrade to 16.04.1. Thanks for the assistance in advance and let me know if you need any other information. [2016/11/22 20:20:35 -0600] graph.php(21109): Failed dbQuery (#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use ne ar '==)' at line 1), Query: SELECT * FROM `processors` WHERE `processor_type` != 'hr-average' AND `device_id` = '280' AND `processor_id` IN (WyI2MzAiXQ==) [2016/11/22 20:21:26 -0600] graph.php(21109): Failed dbQuery (#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use ne ar ')' at line 1), Query: SELECT * FROM `processors` WHERE `processor_type` != 'hr-average' AND `device_id` = '116' AND `processor_id` IN (WyIxMDMwIl0=) Ubuntu 12.04.5 MySQL Ver 14.14 Distrib 5.5.53 PHP 5.3.10-1ubuntu3.25 Server version: Apache/2.2.22 NET-SNMP version: 5.4.3 RRDtool 1.4.7 Thanks, Chip

2 6

Question
by Francisco José Sánchez Iruela 29 Nov '16

29 Nov '16

Hi all, We want to get an archive (.CSV) from Traffic Accounting and after, we proccess it with our ERP. Is it possible? Is there any way to do it? Thanks in advance, -- Francisco José Sánchez IruelaDepartamento de redes <http://www.cartagon.com/> *Tel.* 902 998 398 – (+34) 91 020 11 32 - *Extensión 2105* *Fax.* 902 998 374 – (+34) 91 362 46 46 *E-mail.* fjsanchez(a)cartagon.com Calle Urano 50, 28760, Tres Cantos. Madrid *Web.* www.cartagon.com <https://www.linkedin.com/company/cartagon> <https://twitter.com/cartagon>

3 2

Drive size changing every 5mins
by Simon Mousey Smith 28 Nov '16

28 Nov '16

Hi All Has anybody come across this issue at all? Every 5mins, the Observium is detecting that our volumes on our FreeNAS server have changed? Whats weird is it was working fine a few weeks until I had to reboot the NAS for updates Every since then its been like this? Where should I be looking to find out why this is happening? Regards Simon

4 11

High CPU-load on pollerlog-page
by Cederlund Tobias 28 Nov '16

28 Nov '16

Hi We're experiencing high CPU-load for the browser-process when having the /pollerlog-page open. In IE there is a +45% raise and in Chrome (54) a +30% raise. We're running 8086. Is anyone else experiencing the same issue? Bug? Regards, Tobias

2 6

Vendors Support
by davide.magni＠sorint.it 28 Nov '16

28 Nov '16

Hi all, does someone knows if there is a way to get Observium working with this vendors: * F5 Networks * ProofPoint * Symantec Antispam? Thank you. Sorry if this question if out of the scope of this mailing list. /*Davide Magni*/

2 2

Network Interface marked as "ignored" during discovery?
by Kaya Saman 27 Nov '16

27 Nov '16

Hi, I'm trying to get one of my network interfaces to appear in Observium but for some strange reason it is being marked as "ignored"? In my config.php I haven't included any statements to ignore any devices and the poll time for this particular machine is only a few seconds considering that it's connection to the network is via wifi. The output of #sudo -u www ./discovery.php -h <host> -f shows: ##### Module Start: ports ##### o Caching OIDs ifDescr ifAlias ifName ifType ifOperStatus o Caching DB 2 ports o Discovering ports ..X +---------+--------------------------------+-------------+---------+------------------+-------------+---------+ | ifIndex | ifDescr | ifName | ifAlias | ifType | Oper Status | Ignored | +---------+--------------------------------+-------------+---------+------------------+-------------+---------+ | 1 | lo | lo | ... | softwareLoopback | up | no | | 2 | Realtek Semiconductor Co., ... | ens33 | ... | ethernetCsmacd | down | no | | 3 | wlp0s29f7u7 | wlp0s29f7u7 | ... | ethernetCsmacd | up | yes | +---------+--------------------------------+-------------+---------+------------------+-------------+---------+ o Duration 0.2046s Observium is seeing the interface but just ignoring it? In the UI I don't see anywhere to view 'ignored' ports; I only see "alerts", "down" and "deleted". The port does however, show up under the Inventory section. Does anyone have any idea on how to make this interface not be 'ignored'? After 2 days of searching for an answer I can only conclude that perhaps I need to make this change on the actual MySQL DB itself though I do not know the location of the 'ignore' section of ports/interfaces <- that and this is probably a really bad way of doing things too....! Many Thanks. Kaya

2 7

Re: [Observium] Observium Pro - Weathermap
by Serghei Golipad 25 Nov '16

25 Nov '16

In fact all interfaces have stopped being polled. From: observium <observium-bounces(a)observium.org> on behalf of Serghei Golipad <s.golipad(a)uk.cdw.com> Reply-To: Observium Network Observation System <observium(a)observium.org> Date: Friday, 25 November 2016 at 16:58 To: "observium(a)observium.org" <observium(a)observium.org> Subject: [Observium] Observium Pro - Weathermap Anyone else upgraded to latest SVN and lost their Weathermap traffic stats? Looks like poller-wrapper updated screwed it up. Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

3 5

Observium Pro - Weathermap
by Serghei Golipad 25 Nov '16

25 Nov '16

Anyone else upgraded to latest SVN and lost their Weathermap traffic stats? Looks like poller-wrapper updated screwed it up. Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

1 0

Debug autodiscovery ?
by Svensson Fredrik A 25 Nov '16

25 Nov '16

Hello! I know that many of my new devices doesnt have the same DNS and hostname, so, autodiscovery is not working. Is there a way to debug this so I know what switches isn’t autodiscovered? Regards Fredrik

2 4

Recent Events.
by Gabriel Zamorski 25 Nov '16

25 Nov '16

Hello, I wonder if it’s possible to suppress or ignore some of events in "Recent Events”? I have a problem with Juniper switches and event like this below, which appears every few minutes. "FAN: Fan 2 @ 0/0/1 Status Ok: juniper-XXX FAN: Fan 2 @ 0/0/1 entered OK state: running (previous: runningAtFullSpeed)" Regards, Gabriel

2 2

Custom location Syntax
by Albert Benet 24 Nov '16

24 Nov '16

Hi everybody, What is the correct syntax to put in "Custom location" ? I want to order the location menu with the next format: Devices -> Locations > City -> building -> room is it possible to do this? Thank you very much, Albert

2 3

custom unix-agent application
by Yogi Sofiharja 24 Nov '16

24 Nov '16

Dear Community, I am creating application to monitor disk response time at VM level using ioping. But every time i run the poller with debugger, i’ve got no error but my application always been deleted by the system because its lastpolled is 0. i’ve try to follow the documentation, but its seems like i can’t get solution. Do you guys have any solution for this or you have the same problem? here's the unix agent output : <<<app-ioping>>> reqps:2110 tfspeed:34565401 minreqtime:329 avgreqtime:474 maxreqtime:591 here's the pollling debug result : --------------------------------------------------------------------------- ioping SQL[SELECT * FROM `applications` WHERE `device_id` = '5' AND `app_type` = 'ioping' AND `app_instance` IS NULL] SQL RUNTIME[0.00018406s] + SQL[INSERT INTO `applications` (`device_id`,`app_type`,`app_instance`) VALUES ('5','ioping',NULL)] SQL RUNTIME[0.00168610s] CMD[/usr/bin/rrdtool create /opt/observium/rrd/localhost/app-ioping-2358.rrd \ DS:reqps:GAUGE:600:0:1000000 \ DS:tfspeed:GAUGE:600:0:1000000 \ DS:minreqtime:GAUGE:600:0:1000000 \ DS:avgreqtime:GAUGE:600:0:1000000 \ DS:maxreqtime:GAUGE:600:0:1000000 --step 300 RRA:AVERAGE:0.5:1:2016 RRA:AVERAGE:0.5:6:2976 RRA:AVERAGE:0.5:24:1440 RRA:AVERAGE:0.5:288:1440 RRA:MIN:0.5:6:1440 RRA:MIN:0.5:96:360 RRA:MIN:0.5:288:1440 RRA:MAX:0.5:6:1440 RRA:MAX:0.5:96:360 RRA:MAX:0.5:288:1440 ] CMD EXITCODE[0] CMD RUNTIME[0.0167s] STDOUT[ ] rrd data = :2308:37809231:323:433:525 RRD CMD[update /opt/observium/rrd/localhost/app-ioping-2358.rrd N:2308:37809231:323:433:525] RRD RUNTIME[0.0013s] RRD STDOUT[OK u:0.00 s:0.00 r:3.30] RRD_STATUS[TRUE] --------------------------------------------------------------------------------- after creating rrd files, my application always been deleted by the system. SQL[SELECT * FROM `applications` WHERE `device_id` = '5' AND `app_lastpolled` < '1479199532'] SQL RUNTIME[0.00019503s] /opt/observium/rrd/localhost/app-ioping-2358.rrd SQL[DELETE FROM `applications` WHERE `app_id` = '2358'] SQL RUNTIME[0.00605202s] - o *Module time * 0.0527s --------------------------------------------------------------------------- For your consideration, here's attached related script.

2 2

graph is not include some section
by Farshid Abediny 24 Nov '16

24 Nov '16

Hello, as you see in attachment i see my graph for all ports is not include some section and it has some are that are white and data is not available for those time period. can any one help me why this happen? also i use latest version of observium. i guess maybe it was for cronjob that take about 1-3 minutes for run poller. is it correct or any other idea? thanks,

3 8

What determines a devices' uniqueness?
by Sebastian Harrington 22 Nov '16

22 Nov '16

Hi All, We're currently evaluating observium as a our main network monitoring tool. We're using Observium CE 0.16.10.8128 and wondering how observium determines a device as unique? We currently have the same switch added twice (via auto discovery) into observium and wondered why observium didn't detect it as the same device. Thanks for a wonderful tool! Kind regards, Seb Harrington Network Team Lead, IT Services, University of Sussex,

3 2

Re: [Observium] What determines a devices' uniqueness?
by Moerman, Maarten 22 Nov '16

22 Nov '16

The hostname Maarten From: observium <observium-bounces(a)observium.org> on behalf of Sebastian Harrington <S.M.Harrington(a)sussex.ac.uk> Reply-To: Sebastian Harrington <S.M.Harrington(a)sussex.ac.uk>, Observium Network Observation System <observium(a)observium.org> Date: Monday, November 21, 2016 at 5:28 PM To: "observium(a)observium.org" <observium(a)observium.org> Subject: [Observium] What determines a devices' uniqueness? Hi All, We're currently evaluating observium as a our main network monitoring tool. We're using Observium CE 0.16.10.8128 and wondering how observium determines a device as unique? We currently have the same switch added twice (via auto discovery) into observium and wondered why observium didn't detect it as the same device. Thanks for a wonderful tool! Kind regards, Seb Harrington Network Team Lead, IT Services, University of Sussex,

2 1

Apache hanging (probably not Observium issue but Apache issue)
by Jesper Frank Nemholt 20 Nov '16

20 Nov '16

Hi! I've started to see that on specific actions from within the Observium GUI Apache will lock up. It seems random what action it is, but all Apache workers stop responding and it takes forever to restart Apache afterwards (5-10 min to do a service httpd restart). Anyone had the same issue ? I see no errors in the Apache logs and no errors in Observium logs, nor in other logs on the LInux server (CentOS 7.2). Observium polling still run as usual, so it's just the web interface stopping. /Jesper

3 8

Monitor 147k interfaces with Observium?
by Johann Mallet 18 Nov '16

18 Nov '16

Hello, We must monitor 147,000 interfaces (logical) with Observium. Anyone has already building an architecture with so many network ports? Observium can monitor 150k network ports without failed? What is hardware recommendations? :-) Thanks ! Johann

10 24

Notes in Observium
by chott＠praha1.net 18 Nov '16

18 Nov '16

Hello team! We are looking for abbility of add notes to devices in Observium. Like NOC team add some description or notes for device Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Certifikace: Cisco CXFS, CCDA, SMBEN, SMBAM, CCNA Ubiquiti UCWA, UEWA, UCRSS, UCT Authorised Trainer Cisco, Ubiquiti, TP-Link, Synology Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net/> [Popis: Facebook]<http://www.facebook.com/praha1net>[Popis: LinkedIn]<http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 1

Both HOSTNAME and IP ADDRESS in Observium
by Zaheer ... 18 Nov '16

18 Nov '16

Hello all, I am new to Observium, i am wondering if it is possible to have both the 'hostname' and 'IP address' of our monitored devices in 'devices' -> 'All Devices' tap? Actually i can either add a device by : 1) Its IP address thus i won't have the 'hostname' 2) Or add the 'hostname" and 'IP address' in (/etc/hosts) and add the equipment on Observium, with this option i won't have the IP address

2 1

Confirmation of version with latest vulnerabilities patched
by Eugene Kadish 17 Nov '16

17 Nov '16

Can I get confirmation which commercial version has the Computest discovered vulnerabilities patched? Reference: http://seclists.org/fulldisclosure/2016/Nov/59 Thanks, Eugene

2 1

Are syslog alerts checkers case sensitive ?
by Youssef BENGELLOUN - ZAHR 17 Nov '16

17 Nov '16

1 1

Failed Creating Application
by Yogi Sofiharja 17 Nov '16

17 Nov '16

Dear Community, I am creating application to monitor my server. But every time i run the poller with debugger, i’ve got no error but my application always been deleted by the system because its lastpolled is 0. i’ve try to follow the documentation, but its seems like i can’t get solution. Do you guys have any solution for this or you have the same problem? Yogi Sofi Harja, Research and Development at Biznet GIO Nusantara

1 0

Juniper srx Firewall CP and Flow sessions
by Pablo Marques 16 Nov '16

16 Nov '16

Hi there I installed last week Observium and I am very impressed on how cool this software is. I am having an issue: While monitoring Juniper SRX5[4|8]00s, I can collect all sorts of information from these devices, except for the CP Sessions and the Flow Sessions, they show empty in all firewalls graphs. I would appreciate if someone can help me troubleshoot this. Thank you Pablo

1 1

Regex in alert checkers
by Michael 16 Nov '16

16 Nov '16

When you have a problem that can be solved with regex, you now have two problems... I'm having trouble making a fairly basic regex string match in the alerting system. I want to not match any devices that have hostnames starting with a digit. Easy, right. I think my problem is not finding the right bracing to build the syntax within the ui. Things I have tried that don't seem to work: hostname notregexp \b\d.* hostname notregexp /\b\d.*/ hostname notregexp /(\b\d.*)/ hostname notregexp '/\b\d.*/' hostname notregexp "\b\d.*" hostname notregexp "/\b\d.*/" hostname notregexp '\b\d.*' Has anybody figured out what the secret handshake is? Michael

5 8

Observium Custom Agent Module
by Roman Romanyak 15 Nov '16

15 Nov '16

Hello Observium users, I was following this manual http://www.keithrogers.co.uk/?p=12 to create a custom graph in observium and hit some issues. The APP tab does not appear in observium gui and looks like the graph is not being created. Here is some data: When I run "poller -h monitored_server" I see the following info in the output: [ntp] => string(0) "" [postfix_mailq] => string(19) "Mail queue is empty" [local] => string(0) "" [app] => array( [apache_procs] => string(6) "609938" ) ) ... ... No include: kernel No include: netctr No include: ntp No include: postfix_mailq No include: local No include: app Including: applications/apache_procs.inc.php apache_procs So, it looks like observium is getting data, but I'm not sure where to look to check why I don't see the relevant graph. Thanks, Roman. -- Roman Romanyak Network engineer

2 1

No total values for Peering + Transit ports aggregate graph
by Youssef BENGELLOUN - ZAHR 15 Nov '16

15 Nov '16

2 11

Re: [Observium] No total values for Peering + Transit ports aggregate graph
by Youssef BENGELLOUN - ZAHR 15 Nov '16

15 Nov '16

1 0

$(...).bootstrapSwitch is not a function
by Simon Mousey Smith 15 Nov '16

15 Nov '16

Hi All, I'm getting this error when I try to login to our observium in my console monitor? TypeError: $(...).bootstrapSwitch is not a function - observi...11.8221 (line 143, col 3) <> <> $('[data-toggle="switch"]').bootstrapSwitch(); <> I can actually see in index page that it doesn’t include the bootstrapswitch.js unlike the other pages Adam, maybe you forgot to include it :) regards Simon

2 1

Overal Transit Traffic Today
by Alex Winder 15 Nov '16

15 Nov '16

Hi all, I just visited the live demo on Observium's site and noticed that when you log in there's an overall transit traffic today section. On our version of Observium we don't have this, even though versions seem to be the same (Observium 0.16.10.8181 (stable)). I've had a quick look in the global settings but can't see how to enable this? Has anyone got this working on their installs, we'd like to have this feature on ours J Thanks in advance. Kind regards, Alex

5 25

Re: [Observium] Regex in alert checkers
by Ed Iwanski 15 Nov '16

15 Nov '16

Thought about this right after hitting send, if you want to do away with the notregexp so you can match on something else in the expression as well it would be more efficient to do hostname regexp ^[^0-9] On Nov 14, 2016 5:02 PM, "Ed Iwanski" <ed(a)iwanski.com> wrote: hostname notregexp ^[0-9] On Nov 14, 2016 4:39 PM, "Michael" <obslist(a)smarsz.com> wrote: > When you have a problem that can be solved with regex, you now have two > problems... > > I'm having trouble making a fairly basic regex string match in the > alerting system. > > I want to not match any devices that have hostnames starting with a digit. > Easy, right. > > I think my problem is not finding the right bracing to build the syntax > within the ui. > > Things I have tried that don't seem to work: > > hostname notregexp \b\d.* > hostname notregexp /\b\d.*/ > hostname notregexp /(\b\d.*)/ > hostname notregexp '/\b\d.*/' > hostname notregexp "\b\d.*" > hostname notregexp "/\b\d.*/" > hostname notregexp '\b\d.*' > > > Has anybody figured out what the secret handshake is? > > Michael > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

1 0

Possible bug with device properties port tab and toggles
by Ed Iwanski 14 Nov '16

14 Nov '16

I was not sure of the netiquette of posting bugs in jira so I thought I would send to the mailing list instead. I have been having a problem with the toggle buttons on the top of the device properties -> ports tab. The problem started with the toggle buttons not working properly, when pressed all of the toggle buttons would function like the device save submit button. I seem to be able to recreate this problem and duplicate after doing a bit of looking at the code and testing, it seems to be an artifact of disabling the mouseover popups. Does not work: Global Settings -> Edit, Web UI tab, Mouseover Popus set to Custom/False Device properties -> port tab, toggle buttons do not function, merely submit page Works: Global Settings -> Edit, Web UI tab, Mouseover Popups set to Custom/True Device properties -> port tab, toggle buttons function properly Let me know if anyone has any suggestions or perhaps something I need to change on my side. I did a fresh up to date ubuntu install to validate and the same behavior happens there. Environment: Observium Professional (stable) - 0.16.10.8181 (24th October 2016) OS - Linux 3.10.0-327.36.1.el7.x86_64 [amd64] (RedHat 7.2) Apache - 2.4.6 (Red Hat Enterprise Linux) PHP/5.4.16 PHP - 5.4.16 Python - 2.7.5 MySQL - 5.5.47-MariaDB (extension: mysqli 5.5.50-MariaDB) SNMP - NET-SNMP 5.7.2 RRDtool - 1.4.8

1 1

Ubiquiti errors
by Michael Khalil 14 Nov '16

14 Nov '16

Hello, I just decided to add my Ubiquity devices last night, and i keep getting event logs that the ports are down and up for my switches, and for the access points i get wifi0 and wifi1 are down. Is there anyway i can mute this? *Michael Khalil* | System Administrator *CONTROLTEC* 999 Republic Drive, Suite 100, Allen Park, MI 48101 *P* 313.438.5107 *F* 313.982.1305 *www.control-tec.com <http://www.control-tec.com/>* *This e-mail, and any attachments, is intended solely for use by the addressee(s) named above.* *It may contain confidential or proprietary information of Control-Tec LLC, its subsidiaries, affiliates or business partners.* *If you are not the intended recipient of this e-mail or are an unauthorized recipient of the information, you are hereby notified that any dissemination, distribution or copying of this e-mail or any attachments, is strictly prohibited.* *If you have received this e-mail in error, please immediately notify the sender by reply e-mail and permanently delete the original and any copies or printouts.* *Computer viruses can be transmitted via email.* *The recipient should check this e-mail and any attachments for the presence of viruses.* *Control-Tec LLC accepts no liability for any damage caused by any virus transmitted by this e-mail.*

1 0

Re: [Observium] Juniper srx Firewall CP and Flow sessions
by Youssef BENGELLOUN - ZAHR 14 Nov '16

14 Nov '16

1 0

packetflux expansion units
by Möri Andreas 14 Nov '16

14 Nov '16

Hi everybody.... Packetflux is officially supported by observium - I brought one base unit and 2 expansion units for testing (replacing my today used zenoss installation). Unfortunately observium does only import base version and not the expansion units with the temperature sensors.... Today I have added OIDs of the expansion units and assigned to the base unit manually.... But this not the way it should work.... Can someone confirm that packetflux is fully supported (incl. expansion units )? Any way to import them into observium? Thanks for your ideas.... Andreas Moeri Head of Technology and Operation (CTO) Tel.: +41 (0)32 644 1 822 Mob: +41 (0)79 252 4 364 Fax: +41 (0)32 644 1 161 IM: chmon(a)mathysmedical.com<mailto:chmon@mathysmedical.com> Email: andreas.moeri(a)mathysmedical.com<mailto:andreas.moeri@mathysmedical.com> Mathys AG Bettlach Robert Mathysstr. 5 * Postfach CH-2544 Bettlach * Schweiz Tel.: +41 (0)32 644 1 644 Fax: +41 (0)32 644 1 161 www.mathysmedical.com

1 0

FreeBSD ports updated
by Dirk-Willem van Gulik 14 Nov '16

14 Nov '16

For those that rely on the freebsd ports install to get the ‘dependencies’ right — know that https://svnweb.freebsd.org/ports?view=revision&revision=425979 has moved Observium to version 0.16.10.8128 as of last night. Note that the dependency on svn (to up to trunk) is no longer automatic. Dw.

3 3

Re: [Observium] Upgrading the Subscription Edition to the very latest version
by Youssef BENGELLOUN - ZAHR 14 Nov '16

14 Nov '16

2 1

Upgrading the Subscription Edition to the very latest version
by Youssef BENGELLOUN - ZAHR 14 Nov '16

14 Nov '16

2 5

Remove Disks from polling/alerting
by Andre Geißler 14 Nov '16

14 Nov '16

Hi all Could it be possible to realize polling and alerting toggling for Storage similar to the settings under device's port properties? We have several devices showing their storages, some of them don't need to be shown. I know I can disable them in the config file with $config['ignore_mount_regexp'][] but that isn't that comfortable than doing it in GUI as it is realized for ports Thanks Andre -- Andre Geißler PGP: http://keyserver.pgp.com ID: 13FAA6FC EMAIL: andre(a)geisslermail.de

1 0

rsyslog problems
by Aurelio Llorente Obiols 14 Nov '16

14 Nov '16

Hi all, I have an issue with rsyslog after adding the script 30-observium.conf to /etc/rsyslog.d. Before that, rsyslog is logging, as expected, all the local events to /var/log/messages and /var/log/syslog. After installing the script and restarting rsyslogd all the remote events are logged to MySQL and you can see them in Observium, but local events are not logged anymore. Seems to be an issue with the script for Observium in /etc/rsyslog.d and I got the same issue in a fresh installation, so I believe anyone else may had the same problem. The first installation is a TurnKey VM based in Debian Jessie. The second one is based in Debian testing (stretch). Both systems use rsyslogd 8.xx. I used the script recommended in Observium´s website. Any advice? Thank you in advance Best regards [cid:image002.jpg@01D01AB9.95672060] Aurelio Llorente Systems Administrator Tel.: +34 91 634 85 01 Fax: +34 91 634 86 86 aureliolo(a)meta4.com<mailto:aureliolo@meta4.com> Meta4 Spain Centro Europa Empresarial Edif. Roma C/ Rozabella, 8 28290 Las Rozas - MADRID Tel.: +34 91 634 85 00 www.meta4.es<http://www.meta4.es/> [cid:image003.jpg@01D01AB9.95672060]<http://www.meta4.fr/> Privileged/Confidential Information may be contained in this message. If you are not the addressee of this message, or responsible for its delivery to such person, please destroy this message and kindly notify the sender by reply email. Opinions, conclusions and any other information contained in this message that do not relate to the official business of Meta4 shall be understood as neither given nor endorsed by it. Unauthorized copying or delivery to non-adressees is not permitted.

1 0

Fwd: confirm 5b08eac970c6c96444d098993ebb41074bf122a0
by Simon Mousey Smith 13 Nov '16

13 Nov '16

Hi All, Does anybody have an ideas about this email I’ve got? Never used a mailing list before so this is my fist time using them over the past few months of using observium Not quite sure what is means by excessive bounces as I use a gmail account with plenty of space left? regards Simon > Begin forwarded message: > > From: observium-request(a)observium.org > Subject: confirm 5b08eac970c6c96444d098993ebb41074bf122a0 > Date: 11 November 2016 at 16:55:23 GMT > To: simonsmith5521(a)gmail.com > > Your membership in the mailing list observium has been disabled due to > excessive bounces The last bounce received from you was dated > 11-Nov-2016. You will not get any more messages from this list until > you re-enable your membership. You will receive 3 more reminders like > this before your membership in the list is deleted. > > To re-enable your membership, you can simply respond to this message > (leaving the Subject: line intact), or visit the confirmation page at > > http://postman.memetic.org/cgi-bin/mailman/confirm/observium/xxxxxxxxxxxxxx… > > You can also visit your membership page at > > http://postman.memetic.org/cgi-bin/mailman/options/observium/simonsmith5521… > > > On your membership page, you can change various delivery options such > as your email address and whether you get digests or not. As a > reminder, your membership password is > > Xxxxxxxxxxxxxx > > If you have any questions or problems, you can contact the list owner > at > > observium-owner(a)observium.org

4 3

OSPF issues
by Andrew.Jones＠kiewit.com 13 Nov '16

13 Nov '16

3 3