- observium - lists.observium.org

inconsistent traffic windows -> freebsd
by evo 20 Jun '16

20 Jun '16

Hi, today I noticed something strange I can't explain at the moment. I am running a backup job (8TB) over a 1Gbit Interface, from Windows Server 2012 R2 -> HP switch -> Freebsd 10.2 The freebsd snmp interface reports the real Bits/s with an Avg In of 511.98M while the Windows Interface in charge reports an average of 32M out. If I take a look at the Task Manager within windows I'd also guess and Avg of 500Mbit/s. Also the Unicast Packets TX of Windows are very similiar to the Traffic RX at freebsd. I have attached two screenshots and would be very glad if someone could take a look. I have also added the relevant part of my weathermap, where I take the switch interfaces snmp to draw the links, and they look very alike to the windows interface, but not to the freebsd. Please help, I am starting to doubt my qualification. with kind regards, Valentin

1 0

Looping PTR request
by TAN Lists 20 Jun '16

20 Jun '16

Hey all, New to Observium and loving it so far. I've done some reading, but I can not find an answer to my issue. I would really appreciate some pointers here. After about 6 hours, i start seeing a looping PTR request: 23:14:37.602724 IP 192.168.155.13.39891 > 8.8.8.8.domain: 54851+ PTR? 15.155.168.192.in-addr.arpa. (45) 23:14:37.604162 IP 192.168.155.13.53879 > 8.8.8.8.domain: 58763+ PTR? 15.155.168.192.in-addr.arpa. (45) 23:14:37.605541 IP 192.168.155.13.52487 > 8.8.8.8.domain: 30717+ PTR? 15.155.168.192.in-addr.arpa. (45) 23:14:37.606941 IP 192.168.155.13.34473 > 8.8.8.8.domain: 5645+ PTR? 15.155.168.192.in-addr.arpa. (45) 23:14:37.608351 IP 192.168.155.13.45956 > 8.8.8.8.domain: 5585+ PTR? 30.151.168.192.in-addr.arpa. (45) 23:14:37.609741 IP 192.168.155.13.39834 > 8.8.8.8.domain: 4414+ PTR? 30.151.168.192.in-addr.arpa. (45) 23:14:37.611099 IP 192.168.155.13.35512 > 8.8.8.8.domain: 3031+ PTR? 15.155.168.192.in-addr.arpa. (45) 23:14:37.612479 IP 192.168.155.13.49633 > 8.8.8.8.domain: 12185+ PTR? 15.155.168.192.in-addr.arpa. (45) 23:14:37.613858 IP 192.168.155.13.59192 > 8.8.8.8.domain: 1926+ PTR? 15.155.168.192.in-addr.arpa. (45) 23:14:37.615309 IP 192.168.155.13.51916 > 8.8.8.8.domain: 36203+ PTR? 15.155.168.192.in-addr.arpa. (45) 23:14:37.616667 IP 192.168.155.13.49695 > 8.8.8.8.domain: 28584+ PTR? 30.151.168.192.in-addr.arpa. (45) 23:14:37.618245 IP 192.168.155.13.50620 > 8.8.8.8.domain: 13819+ PTR? 15.155.168.192.in-addr.arpa. (45) 23:14:37.619849 IP 192.168.155.13.42869 > 8.8.8.8.domain: 48052+ PTR? 15.155.168.192.in-addr.arpa. (45) Manual lookup: root@freshwater ~]host 192.168.155.15 Host 15.155.168.192.in-addr.arpa. not found: 3(NXDOMAIN) [root@freshwater ~]# host 192.168.155.15 8.8.8.8 Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: Host 15.155.168.192.in-addr.arpa. not found: 3(NXDOMAIN) [root@freshwater ~]# I'm not running PTR on these IPs and have turned off discovery (i think) (i dont need it) >From my config: $config['autodiscovery']['ip_nets'] = array("127.0.0.0/8"); $config['autodiscovery']['xdp'] = FALSE; $config['autodiscovery']['ospf'] = FALSE; $config['autodiscovery']['bgp'] = FALSE; $config['autodiscovery']['libvirt'] = FALSE; $config['autodiscovery']['snmpscan'] = FALSE; $config['enable_printers'] = 0; $config['enable_sla'] = 0; $config['enable_ports_junoseatmvp'] = 0; $config['enable_ports_adsl'] = 1; $config['ignore_mount_optical'] = 1; $config['poller_modules']['unix-agent'] = 1; It's running on: [root@freshwater observium]# httpd -v Server version: Apache/2.4.6 (CentOS) Server built: May 12 2016 10:27:23 [root@freshwater observium]# php -v PHP 5.4.16 (cli) (built: May 12 2016 13:45:17) Copyright (c) 1997-2013 The PHP Group Zend Engine v2.4.0, Copyright (c) 1998-2013 Zend Technologies [root@freshwater observium]# And a restart to apache does not kill this process. I can't seem to find what is doing it, but the ONLY thing on this server is Observium and nothing else. It's possible it isnt, but it seems to be :( The only way to stop this is to restart the whole server for some reason ps auxf from when the loop is happening and after an apache restart root 6299 0.0 0.0 0 0 ? S 23:43 0:00 \_ [kworker/3:1] root 1 0.0 0.1 190528 5564 ? Ss Jun14 1:00 /usr/lib/systemd/systemd --switched-root --system --deserialize 21 root 436 0.0 0.1 36820 4856 ? Ss Jun14 8:01 /usr/lib/systemd/systemd-journald root 458 0.0 0.0 118480 1260 ? Ss Jun14 0:00 /usr/sbin/lvmetad -f root 475 0.0 0.0 44868 3464 ? Ss Jun14 0:00 /usr/lib/systemd/systemd-udevd root 541 0.0 0.0 116724 1632 ? S<sl Jun14 0:02 /sbin/auditd -n root 564 0.0 0.0 19312 1260 ? Ss Jun14 0:27 /usr/sbin/irqbalance --foreground root 566 0.0 0.1 249796 7616 ? Ss Jun14 7:00 /usr/bin/vmtoolsd root 572 0.0 0.1 391788 5588 ? Ssl Jun14 0:39 /usr/sbin/rsyslogd -n root 573 0.0 0.0 26400 1744 ? Ss Jun14 0:18 /usr/lib/systemd/systemd-logind dbus 574 0.0 0.0 26724 1828 ? Ss Jun14 0:36 /bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation chrony 576 0.0 0.0 115844 1900 ? S Jun14 0:02 /usr/sbin/chronyd root 582 0.0 0.0 203368 1240 ? Ssl Jun14 0:00 /usr/sbin/gssproxy -D root 592 0.0 0.2 434960 8368 ? Ssl Jun14 0:12 /usr/sbin/NetworkManager --no-daemon polkitd 607 0.0 0.3 527584 12132 ? Ssl Jun14 0:07 /usr/lib/polkit-1/polkitd --no-debug root 824 0.5 0.7 251120 27696 ? Rs Jun14 48:26 /usr/sbin/snmptrapd -Lsd -f root 825 0.0 0.0 82560 3616 ? Ss Jun14 0:00 /usr/sbin/sshd -D root 23255 0.0 0.1 143416 5544 ? Ss 21:39 0:00 \_ sshd: root@pts/0 root 23257 0.0 0.0 115384 2060 pts/0 Ss+ 21:39 0:00 | \_ -bash root 25194 0.0 0.1 143808 5928 ? Ss 23:08 0:00 \_ sshd: root@pts/1 root 25196 0.0 0.0 115384 2112 pts/1 Ss 23:08 0:00 \_ -bash root 8186 0.0 0.0 151168 1960 pts/1 R+ 23:46 0:00 \_ ps auxf root 829 0.0 0.0 29304 1004 ? Ss Jun14 0:00 /usr/sbin/xinetd -stayalive -pidfile /var/run/xinetd.pid root 831 0.0 0.2 222956 10612 ? Ss Jun14 4:36 /usr/sbin/snmpd -LS0-6d -f root 836 0.0 0.3 552452 15072 ? Ssl Jun14 0:00 /usr/sbin/libvirtd root 841 0.0 0.0 126332 1572 ? Ss Jun14 0:02 /usr/sbin/crond -n root 851 0.0 0.0 110036 852 tty1 Ss+ Jun14 0:00 /sbin/agetty --noclear tty1 linux mysql 1171 0.0 0.0 113256 1580 ? Ss Jun14 0:00 /bin/sh /usr/bin/mysqld_safe --basedir=/usr mysql 1600 0.4 5.9 1695560 232072 ? Sl Jun14 35:42 \_ /usr/libexec/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --log-error=/var/log/mariadb/mariadb.log --pid-file=/var/run/mariadb/ root 2159 0.0 0.0 91140 2164 ? Ss Jun14 0:02 /usr/libexec/postfix/master -w postfix 2161 0.0 0.1 91420 4132 ? S Jun14 0:00 \_ qmgr -l -t unix -u postfix 10160 0.0 0.1 91244 3924 ? S 22:30 0:00 \_ pickup -l -t unix -u root 29025 0.0 0.3 396460 15080 ? Ss 23:16 0:00 /usr/sbin/httpd -DFOREGROUND apache 29027 0.0 0.3 397296 12784 ? S 23:16 0:00 \_ /usr/sbin/httpd -DFOREGROUND apache 29029 0.0 0.3 397556 12816 ? S 23:16 0:00 \_ /usr/sbin/httpd -DFOREGROUND apache 29031 0.0 0.2 396596 8644 ? S 23:16 0:00 \_ /usr/sbin/httpd -DFOREGROUND apache 29035 0.0 0.3 397296 12812 ? S 23:18 0:00 \_ /usr/sbin/httpd -DFOREGROUND apache 29039 0.0 0.3 397556 12816 ? S 23:18 0:00 \_ /usr/sbin/httpd -DFOREGROUND apache 29041 0.0 0.3 397300 12872 ? S 23:18 0:00 \_ /usr/sbin/httpd -DFOREGROUND apache 351 0.0 0.2 396596 8644 ? S 23:28 0:00 \_ /usr/sbin/httpd -DFOREGROUND apache 2450 0.0 0.2 396596 8644 ? S 23:33 0:00 \_ /usr/sbin/httpd -DFOREGROUND apache 4385 0.0 0.2 396596 8644 ? S 23:39 0:00 \_ /usr/sbin/httpd -DFOREGROUND apache 6301 0.0 0.1 396596 7652 ? S 23:44 0:00 \_ /usr/sbin/httpd -DFOREGROUND [root@freshwater observium]# Any help appreciated Thanks!

2 1

Smokeping
by Andrew Colin 20 Jun '16

20 Jun '16

Hi Guys Since the last update smokeping no longer updates on the gui Is there an issue?

2 4

uptime issue ?
by Medve István 20 Jun '16

20 Jun '16

Hi, we are using 0.16.5.7901 (Stable) and have got some wrong alert of rebooting devices after 1 year, 132 days, 2h, 23m Actually they didn't reboot but uptime graphs restarted. Can be a kind of counter overflow ? Affected devices are some brocade san switches and juniper isg1000 Regards, imedve

3 3

Group ports based on subnet...?
by Henrik Cednert (Filmlance) 19 Jun '16

19 Jun '16

Hello Trying/wanting to create a group for ports based on what subnet they're on. Is this possible...? Think I've tried most approached but haven't managed so far. When looking at details on ports for a device this is pretty much already done at the right most column next to mac adress. So doesn't seem that far fetched? =) Cheers and thanks -- Henrik Cednert cto | compositor Filmlance International | www.filmlance.se mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ]

1 0

VRF(BGP) / Arista
by John Klasa 17 Jun '16

17 Jun '16

Hi, any timeframe when this can be included in Observium if at all? Since Observium doesn't support Arista VRF and we are running all our BGP peers in VRFs BGP polling doesn't work obviously. Regards -John

3 3

SVN broken
by Serghei Golipad 16 Jun '16

16 Jun '16

Guys, Is SVN broken again? svn: E000110: Unable to connect to a repository at URL 'http://svn.observium.org/svn/observium/trunk' svn: E000110: Error running context: Connection timed out Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

2 1

Netapp Interface Speed.
by Zafar Pravaiz 16 Jun '16

16 Jun '16

HI, I monitoring a my NetApp storage. Recently I have noticed that observium show 10G connected Interface as 1.41 Gbps speed and non connected as 10 Mbps. I have checked on switch side its correctly show 10G connected. Any hint what could be the reason for this? Thanks Zafar Pravaiz IT Senior Network Engineer Information Technology Department Tel +971 6 515 2164 Fax +971 6 515 2112 American University of Sharjah PO Box 26666, Sharjah United Arab Emirates http://www.aus.edu <http://www.aus.edu/> zpravaiz(a)aus.edu <mailto:youremail@aus.edu>

2 1

WatchGuard Device Discovery
by Duncan Mossop 16 Jun '16

16 Jun '16

Good Morning, I’ve recently added a WatchGuard M200 into Observium which discovers all the correct interfaces/counters but shows the device ultimately as generic / unknown. Is this a WatchGuard issue in regards to what is exposed by SNMP or is it something that might appear in an Observium update? We’re on 16.5.7872. Thanks, Duncan Mossop • Operations Manager, SystemHOST Ltd ________________________________ dmossop(a)systemhost.co.uk [cid:imaged755ff.PNG@690e2bcf.4b98904c] 01524 737414 systemhost.co.uk<http://www.systemhost.co.uk> [Twitter]<https://twitter.com/systemhost> Follow us on Twitter ________________________________ SystemHOST Ltd Registered office: Holmere Hall, Yealand Conyers, Carnforth, Lancs, LA5 9SN Registered in England No.05028996 VAT No. 927386490 This e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. By opening this email or its attachments, you accept liability for any damage that may be caused to your computer hardware, software or data. ________________________________

1 0

Re: [Observium] Group based on description?
by Moerman, Maarten 15 Jun '16

15 Jun '16

You can use: Hostname, os, type, sysName, sysDescr, sysContact, Location, hardware & serial as an attribute for this. See the documentation for the attribute syntax on alerting, which works for groups as well. Maarten -- Maarten Moerman | Mgr, Network Engineering | eBay Classifieds | +31-655122247 | mmoerman(a)ebay.com<mailto:mmoerman@ebay.com> From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Fredrik Winäs <Fredrik.Winas(a)cgit.se<mailto:Fredrik.Winas@cgit.se>> Reply-To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Date: Tuesday, June 14, 2016 at 3:46 PM To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Subject: [Observium] Group based on description? I would like to make a device group based on the description of the device, the one that i set it observium. [cid:image001.png@01D1C653.E533AF90] Can this be done? Med Vänlig Hälsning Fredrik Winäs tel +46 31 762 02 43 fredrik.winas(a)cgit.se<mailto:fredrik.winas@cgit.se> www.cgit.se<http://www.cgit.se/> CGit AB Taljegårdsgatan 11C SE-431 53 Mölndal

5 8

SMTP fail, ignores settings in config.php
by Fredrik Winäs 15 Jun '16

15 Jun '16

Hi I'm trying to figure out what has happend to the mail in our observium. It was working for a while but not now.. My Observium is a TurnKey appliance download. Now i can see that it's trying to open port 25 on a server that it's not supposed to go to.. Don't know if someone have been messing with the server.. Here is my config.php settings. // Enable alerter (not available in CE) #$config['poller-wrapper']['alerter'] = TRUE; // Set up a default alerter (email to a single address) $config['alerts']['alerter']['default']['descr'] = "Default Email Alert"; $config['alerts']['alerter']['default']['type'] = "email"; $config['alerts']['alerter']['default']['contact'] = "driftlarm(a)xxxxxx.se"; $config['alerts']['alerter']['default']['enable'] = TRUE; //Email settings $config['email']['default'] = "driftlarm(a)cgit.se"; $config['email']['default_only'] = TRUE; $config['email']['from'] = "CGit Observium <observium(a)xxxxx.se>"; $config['email']['backend'] = 'mail'; $config['email']['smtp_host'] = 'smtprelay1.hosting.local'; $config['email']['smtp_port'] = 25; $config['email']['smtp_timeout'] = 10; $config['email']['smtp_secure'] = FALSE; $config['email']['enable'] = TRUE; $config['email']['smtp_auth'] = FALSE; $config['email']['smtp_username'] = NULL; $config['email']['smtp_password'] = NULL; ping smtprelay1.hosting.local PING smtprelay1.hosting.local (172.31.232.15) 56(84) bytes of data. 64 bytes from smtprelay1.hosting.local (172.31.232.15): icmp_seq=1 ttl=64 time=0.460 ms /opt/observium# ./test_alert.php -a 34 MIB search path: /opt/observium/mibs Cannot find module (LM-SENSORS-MIB): At line 0 in (none) Observium 0.16.5.7901 Test Alert Notification ##### Software versions ##### o OS Linux 3.16.0-4-amd64 [amd64] (Debian 8.1) o Apache 2.4.10 o PHP 5.6.20-0+deb8u1 (OPcache: DISABLED) o Python 2.7.9 o MySQL 5.5.49-0+deb8u1 (extension: mysqli 5.5.49) o SNMP NET-SNMP 5.7.2.1 o RRDtool 1.4.8 ##### MySQL mode ##### o MySQL ##### Charset info ##### o PHP UTF-8 o MySQL utf8 ##### Timezones info ##### o Date Monday, 13-Jun-16 21:23:47 CEST o PHP +02:00 o MySQL +02:00 o Notifying [email] Driftlarm: {"email":"driftlarm(a)cgit.se"} root@observium1 /opt/observium# Output from tcptrack Client Server State Idle A Speed 172.31.232.40:38086 172.16.102.16:25 SYN_SENT 1s 0 B/s 172.31.232.40:38088 172.16.102.16:25 SYN_SENT 28s 0 B/s 172.31.232.40:38090 172.16.102.16:25 SYN_SENT 28s 0 B/s And as you can see it's not supposed to connect to 172.16.102.16. that server does not even have a SMTP server on it. Med Vänlig Hälsning Fredrik Winäs tel +46 31 762 02 43 fredrik.winas(a)cgit.se<mailto:fredrik.winas@cgit.se> www.cgit.se<http://www.cgit.se/> CGit AB Taljegårdsgatan 11C SE-431 53 Mölndal

4 6

Temperature "A" bug
by Laszlo Nemeth 14 Jun '16

14 Jun '16

Hi, We have a Nexus 5K with FEX. The Observium (v 7900) can show the temp datas of it. But if set the „Graph Previous” and „Show Legend”, the value of the previous temp datas shows as „A” instead of „C”(elsius). Attached a picture. Regards, Laszlo

2 1

offset port numbers
by James Plant 14 Jun '16

14 Jun '16

Hi, Adding switches on my observium is fine but the port numbers are 1 out as the ports start at swp00 instead of swp01, is there a fix for this? Thanks James James Plant Events IT Assistant +44 (0)161 827 7630 Manchester Central Petersfield, Manchester M2 3GX Tel: +44 (0)161 834 2700 www.manchestercentral.co.uk <http://www.manchestercentral.co.uk> [http://www.manchestercentral.co.uk/email/ManchesterCentral.jpg] <http://www.manchestercentral.co.uk> [http://www.manchestercentral.co.uk/sites/default/files/email_sig_640x142.jpg] <http://www.mitawards.co.uk/vote/> [http://www.manchestercentral.co.uk/sites/default/files/twitter-bird-blue-on…]<http://www.twitter.com/mcr_central> [http://www.manchestercentral.co.uk/sites/default/files/icon-linkedin.png] <http://www.linkedin.com/company/manchester-central> Manchester Central is committed to sustainability. Click here<http://www.manchestercentral.co.uk/sustainability> to see our policy. Any proposal referred to within this e-mail is valid for 14 days only from the date of issue, or until superseded by a subsequent written offer which ever is the earlier. Manchester Central Convention Complex Limited (MCCCL) reserves the right to review and revise the terms and service offerings contained herewith in accordance with our business practices, save for the written acceptance of an MCCCL Licence Agreement and the ensuing terms and conditions. Tenancy proposals are non-binding until a deposit has been received by MCCCL and a Licence Agreement exchanged. MCCCL retains exclusive rights on the dates and the proposed space for the proposed tenancy until such time. The communication/direct marketing of the proposed tenancy before Licence Agreements have been exchanged and dated, is entirely at your risk and MCCCL accepts no responsibility whatsoever for any claims that exhibitors or any third party may make against you, should you fail to exchange Licence Agreements with us.

2 1

Group based on description?
by Fredrik Winäs 14 Jun '16

14 Jun '16

I would like to make a device group based on the description of the device, the one that i set it observium. [cid:image001.png@01D1C653.E533AF90] Can this be done? Med Vänlig Hälsning Fredrik Winäs tel +46 31 762 02 43 fredrik.winas(a)cgit.se<mailto:fredrik.winas@cgit.se> www.cgit.se<http://www.cgit.se/> CGit AB Taljegårdsgatan 11C SE-431 53 Mölndal

1 0

file edit alert for agent
by Farshid Abediny 14 Jun '16

14 Jun '16

Hello, is there anyway that agent alert us on observium when some important file like /etc/passwd edit alert us like as zabbix? thanks,

1 0

Professional Subscription
by Sean Drury 14 Jun '16

14 Jun '16

Hi there, I signed up last night and it looked to go through ok, haven't received any confirmation yet nor shows up in my guest area? Sorry if this is the wrong place to ask. Kind Regards, Sean Drury - IT Manager www.bartons.net.au P: 07 3396 7777 | M: 0412 584 394 | E: SeanD(a)bartons.net.au [cid:image001.jpg@01D1C30A.2013E8C0] Be green and read from the screen --------------------------------------------------------------------------------- Notice : This email and attachments (if any) is for the exclusive use of the addressee and may contain information that is privileged and confidential. Any unauthorised use of the contents of the email and/or attachments is expressly prohibited. If you are not the addressee of this email, please notify me immediately by email and t hen immediately destroy any electronic or paper copy of this email and/or attachments. Bartons does not take responsibility for the views expressed in the email or for the consequences of any computer viruses that may be transmitted with this email. This email is subject to copyright. No part of it should be reproduced, adapted or transmitted without the written consent of the copyright owner. This email has been scanned by the ES1000.

3 10

BlueCat monitoring
by Jesper Frank Nemholt 13 Jun '16

13 Jun '16

Hi! I created a few custom OID entries for BlueCat (DNS). This works well as the DNS OIDs are straight forward. For the DHCP part of this product, using custom OIDs won't cut it as one have to traverse each subnet for data, so I wanted to know if anyone is working on enhanced BlueCat already ? /Jesper

1 0

session time out
by Farshid Abediny 13 Jun '16

13 Jun '16

Hello, we have a problem with observium when we login to observium wait some minutes 1-2 minutes observium logout us automatically and we shoudl reenter it seems session expired within 1-2 minutes or when we go to all device and set basic and choose a device then it logout us and we should reneter that, any idea how solve this? thanks,

1 0

remove previous configs in rancid with observium
by Farshid Abediny 12 Jun '16

12 Jun '16

Hello, i go to /var/rancid/observium/configs and remove all configs but in observium web panel still show previous configs how can i fix it? thanks,

2 1

Re: [Observium] Cool Output of APC in-row cooler, random enormous spikes.
by Henrik Cednert (Filmlance) 10 Jun '16

10 Jun '16

I'll be damned. That was probably just pure luck but it alerted faster than expected. Please see screenshot link displaying the alert mail, because they to look a tad odd: https://www.dropbox.com/s/5ynr67ior7at3e3/mailalert.png. It lasted for 5 minutes, or actually just a brief moment within the polling period, but look at the duration in the recovery email. Really odd. By the way, are there templates where we can configure the layout of the email alerts (subject, what it displays in body and more)? Here is a screenshot of the graph created from the data in previous command. https://www.dropbox.com/s/nw47m75tj601gmh/csv_graph.png So yes. There's spikes in the data and I guess they don't show up in data center expert because they run some filter at it or just ignore random peaks or something. The value of the peaks in the now collected data is ALWAYS 20480 which in some way feels significant since it's constant and feels like some sort of unit max value. Not sure if there's other higher peaks as well because what I see in Observium is higher or if the scale of the axis there is off, not sure but here's another screenshot. https://www.dropbox.com/s/0whwzf7wf34j8uu/observium_graph.png But, feels like an APC issue then so guess I'll have the pleasure of once again dealing with that support. =/ Cheers and thanks for the help Adam. -- Henrik Cednert cto | compositor Filmlance International | www.filmlance.se mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ] From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Henrik Cednert <henrik.cednert(a)filmlance.se<mailto:henrik.cednert@filmlance.se>> Reply-To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Date: Friday 10 June 2016 at 15:27 To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Subject: Re: [Observium] Cool Output of APC in-row cooler, random enormous spikes. Thanks Adam Polling it every second now and storing to a log file for investigation with this. #!/bin/bash while true; do sleep 1 timestamp=$(date +"%T") sensor_value=$(/usr/bin/snmpbulkwalk -v2c -c 'public' -Pu -OQUs -m PowerNet-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/apc 'udp':'acrc02':'161' coolingUnitStatusAnalogValue.1.10) printf "$timestamp,$sensor_value\n" >>/home/neo/Documents/acrc02_coolingUnitStatusAnalogValue.1.10.txt done I'll be back and ask for advice when I get the next alert. =) Cheers and thanks -- Henrik Cednert cto | compositor Filmlance International | www.filmlance.se mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ] From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Adam Armstrong <adama(a)memetic.org<mailto:adama@memetic.org>> Reply-To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Date: Friday 10 June 2016 at 14:45 To: "observium(a)observium.org<mailto:observium@observium.org>" <observium(a)observium.org<mailto:observium@observium.org>> Subject: Re: [Observium] Cool Output of APC in-row cooler, random enormous spikes. Hi Henrik, Sensors are all "gauges", so there's no real concept of spikes the way there is for ports (which are counters). If we're getting a spike, it's either that the device is sending the wrong data, or that the device is sending a number which hasn't been adjusted for the scale the device uses. It'll be the first if the 1.6-1.9 doesn't have any relation to the "real" number, and the latter if it's just off by a few orders of magnitude. It's pretty unlikely that we could do any bad maths, maths is easy, and such bugs would present much more regularly. These sorts of things are pretty common on many vendor's SNMP implementations. You might be able to see it in action by frequently polling the sensor in question's OID and logging the value. adam. Sent from Mailbird<http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campai…> On 10/06/2016 13:40:59, Henrik Cednert (Filmlance) <henrik.cednert(a)filmlance.se<mailto:henrik.cednert@filmlance.se>> wrote: Hello Monitoring two APC in-row coolers. One of them gets some weird 1.6-1.9M watts spikes every now and then. Once a day or such, without regularity. I have started to monitor the same device in Schneider Data Center Expert just to see if it's a device or monitoring issue. There's no spikes there so I do think it's something with Observium and this particular unit. The other unit is fine and no spikes there. Only difference is that the load on this one is smaller and at times down to 0. I do see that there's an option to log spikes in the config file. But not sure I can monitor a sensor with it since it says port and wants and ID. Can I debug these spikes in some way? Cheers and thanks -- Henrik Cednert cto | compositor Filmlance International | www.filmlance.se mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ] _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 3

Cool Output of APC in-row cooler, random enormous spikes.
by Henrik Cednert (Filmlance) 10 Jun '16

10 Jun '16

Hello Monitoring two APC in-row coolers. One of them gets some weird 1.6-1.9M watts spikes every now and then. Once a day or such, without regularity. I have started to monitor the same device in Schneider Data Center Expert just to see if it's a device or monitoring issue. There's no spikes there so I do think it's something with Observium and this particular unit. The other unit is fine and no spikes there. Only difference is that the load on this one is smaller and at times down to 0. I do see that there's an option to log spikes in the config file. But not sure I can monitor a sensor with it since it says port and wants and ID. Can I debug these spikes in some way? Cheers and thanks -- Henrik Cednert cto | compositor Filmlance International | www.filmlance.se mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ]

2 2

Dell/Force10 S60. Missing a few sensors/objects
by Henrik Cednert (Filmlance) 10 Jun '16

10 Jun '16

Hi there Let me start with apologise if I use the wrong terminology here, heard a few times on IRC that I need to read-up on MIB and OID's. =) My brain refuse to fulle understand it though, not sure why. Have added a Force10 s60 switch to observium. Mostly it's fine but I do miss sensors for PSU and the Fans. Here's a discovery.php -dd of the device: http://pastebin.com/D7FNqgVi Here's an (attempt) of snmpwalking it. Still not sure I do this the right way... http://pastebin.com/DnkZtkvX At around line 1788 and forward you can see the PSU and fan objects (line numbers in this paste is wrong). 1. F10-S-SERIES-CHASSIS-MIB::chStackUnitNumFanTrays.1 = INTEGER: 2 2. F10-S-SERIES-CHASSIS-MIB::chStackUnitNumFanTrays.2 = INTEGER: 0 3. F10-S-SERIES-CHASSIS-MIB::chStackUnitNumPowerSupplies.1 = INTEGER: 1 4. F10-S-SERIES-CHASSIS-MIB::chStackUnitNumPowerSupplies.2 = INTEGER: 0 5. F10-S-SERIES-CHASSIS-MIB::chStackUnitNumPluggableModules.1 = INTEGER: 2 6. F10-S-SERIES-CHASSIS-MIB::chStackUnitNumPluggableModules.2 = INTEGER: 0 7. F10-S-SERIES-CHASSIS-MIB::chStackUnitRowStatus.1 = INTEGER: active(1) 8. F10-S-SERIES-CHASSIS-MIB::chStackUnitRowStatus.2 = INTEGER: active(1) 9. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyIndex.1.1 = INTEGER: 1 10. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyIndex.1.2 = INTEGER: 2 11. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyOperStatus.1.1 = INTEGER: up(1) 12. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyOperStatus.1.2 = INTEGER: down(2) 13. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyType.1.1 = INTEGER: ac(1) 14. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyType.1.2 = INTEGER: 0 15. F10-S-SERIES-CHASSIS-MIB::chSysFanTrayIndex.1.1 = INTEGER: 1 16. F10-S-SERIES-CHASSIS-MIB::chSysFanTrayIndex.1.2 = INTEGER: 2 17. F10-S-SERIES-CHASSIS-MIB::chSysFanTrayOperStatus.1.1 = INTEGER: up(1) 18. F10-S-SERIES-CHASSIS-MIB::chSysFanTrayOperStatus.1.2 = INTEGER: up(1) I looked at the documentation for something about expanding on existing device support. Couldn't find that and I assume it's not that easy? Have anyone added support for this in their observium installation or can point me in the direction on how to go about it (in a friendly way...). Cheers and thanks -- Henrik Cednert cto | compositor Filmlance International | www.filmlance.se mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ]

2 2

Alert check suppressed
by Eduardo Schoedler 10 Jun '16

10 Jun '16

Hi, In what reasons can occur "Checks failed but alert suppressed by [ENT]"? What mean "[ent]"? Thank you. -- Eduardo Schoedler

2 3

DB Memory Ports state
by AbdelBaki Yacine Tounsi 10 Jun '16

10 Jun '16

*DB memory Ports State on ubuntu 16.04 !!!Mr Tounsi Abdelbaki Yacine* *Régional Manager .Etablissement Régional Réseau MultiService AnnabaProvider Edge IP/MPLS Annaba. Algérie* *Groupe Algerie Telecom SPA.* http://www.at.dz/?p=rms *Mobile : +213 660 32 88 53* *Téla +@ : +213 **983 00 00 18* *IPCentrex : ** +213 983 01 00 50* https://www.epay.dz/track/NTAwMDA5MQ/ http://www.journaldunet.com/management/efficacite-personnelle/citations-pou… العلم بلا عمل كشجرة بلا ثمرة <http://rockngineer.blogspot.com/> *"J'utilise Linux* au lieu de Windows ....*Parce que je suis* nul en *informatique* ! " *NGN UIT :* http://www.itu.int/ITU-D/treg/Events/Seminars/GSR/GSR07/consultation-fr.html *Blog:* http://bounatelecom.wordpress.com/ *Ma liste de partage : http://www.google.com/reader/shared/bonois23 <http://www.google.com/reader/shared/bonois23>* *Linkedin *: http://dz.linkedin.com/in/bonois23

2 2

Proper procedure in Observium for hardware replacement?
by Derek 09 Jun '16

09 Jun '16

So, I had a question regarding hardware replacement. I recently replaced several Cisco 2811 routers with Cisco ISR 4331's, and kept the same host name. After the swap, I noticed I wasn't getting any graphs for data flow on the serial interfaces. I attempted running discovery on them again, and waited for a few polling cycles, but still go no data. In the end, I ended up deleting the devices completely out of Observium, including the RRD files, and re-adding. After this was done, everything showed up correctly. So, as I will be doing more of these soon, is there a specific process I should follow for these? Maybe rename the old device to a different hostname, then add the new device? The historical data wasn't critical, so I'm not too bothered losing it, but I would like to avoid it if possible. Thanks, Derek

2 1

spam out there
by Jason Vanlandingham 09 Jun '16

09 Jun '16

Heads up: I got some targeted spam. The listed from address is Russian, and the text is: Hi, Look what they have for you, I guess it's worth reading, more info here <http://slurukeste.cctvessentials.info/lnrayiga> (scuzzy link removed) Hope this helps, Observium Network Observation System

2 1

some questions about alerting
by Farshid Abediny 09 Jun '16

09 Jun '16

Hello, i want know how can i create following condition for my switch in observium ? 1. when unitcast pps or bps exceed more than X pps 1.2. when multicast pps or bps exceed more than X pps 1.3. when broadcast pps or bps exceed more than X pps 2. when switch port status will be down and up alert me, thanks,

1 0

No longer retrieving software version
by Daniel Olynsma 08 Jun '16

08 Jun '16

Hi, we are running 0.16.6.7912(rolling). After a recent svn update, the SW version is not being reported correctly After running the poller.php on a single device with '-dd' options the below is seen. I have tried software versions on the product that did used to report the version. However they now are not. Has something changed recently that we have failed to update? ? ----------------- including: includes/polling/os.inc.php ##### Module Start: os ##### o OS Poller OS CMD[/usr/bin/snmpget -v2c -c 'public' -Pu -OsvQU -m AT-SETUP-MIB -M /opt/observium/mibs 'udp':'amf-r2':'161' currSoftVersion.0] CMD EXITCODE[1] CMD RUNTIME[0.006s] STDOUT[ ] STDERR[ MIB search path: /opt/observium/mibs Cannot find module (AT-SETUP-MIB): At line 1 in (none) currSoftVersion.0: Unknown Object Identifier (Sub-id not found: (top) -> currSoftVersion) ] SNMP STATUS[FALSE] SNMP ERROR - device: 97, cmd: snmpget, options: -OsvQU, mib: 'AT-SETUP-MIB', oid: 'currSoftVersion.0', cmd exitcode: 1, snmp error code: #996, reason: 'MIB or oid not found', runtime: 0.0060188770294189 o Hardware AW+ o Version <empty> o Features <empty> o Serial <empty> o Asset <empty> o Module time 0.0084s including: includes/polling/ipmi.inc.php ##### Module Start: ipmi ##### ----------------- Regards, Daniel

2 1

Out of office
by ffuentes＠aasteel.com 07 Jun '16

07 Jun '16

I will be out starting 06/07/16 and coming back 06/14/16, but I will check on my email periodically. Please contact the IS Department for any issues.

1 0

website formatting is borken
by Christopher Barry 07 Jun '16

07 Jun '16

Greets, I signed up to the mailing list just to point out that the page header on all documentation pages is half-obscured by the menu bar and looks like crap. In the picture, it's the 'Screenshots' header, but it's on all pages. Thought you might want to know that. http://www.pasteall.org/pic/show.php?id=103988 Yes, it's scrolled all the way up... Also, having a simple contact email address at the bottom of the homepage for this type of thing would certainly be nice. I had to jump through a bunch of hoops (sign up, wait for moderation, put image on paste site, blah, blah, etc.) just to tell you this out of the goodness of my heart. Likely nobody else will do this - and I'm not even using this product! You're welcome. Running: Debian sid Firefox ESR 45.1.1

2 1

Out of office
by ffuentes＠aasteel.com 07 Jun '16

07 Jun '16

I will be out starting 06/07/16 and coming back 06/14/16, but I will check on my email periodically. Please contact the IS Department for any issues.

1 0

Out of office
by ffuentes＠aasteel.com 07 Jun '16

07 Jun '16

I will be out starting 06/07/16 till 06/17/16 on vacation, but I will check on my email periodically. Please contact the IS Department for any issues.

1 0

Port Types
by Lyndon Labuschagne 07 Jun '16

07 Jun '16

Hi All How exactly do I flag a port as Core, Peering, Transit etc? I didn't see anything in the documentation but I may have missed it, if someone could point me in the right direction it would be appreciated

3 4

Broken Graphs
by Shoaib Ahmed 07 Jun '16

07 Jun '16

Hello Everyone! I have recently updated toObservium CE 0.16.1.7533 <http://www.observium.org/> i am facing broken graph issue i googled but haven't find anything except for updating to latest stable version but still facing broken graph issues for long date range (for example, graph range for 2 weeks, monthly and yearly ranges). i have also update rrdtool to RRDtool 1.6.0 but still facing same issues. I have create graphs from command line but still getting broken graphs, Can anyone help me solving this issue ? I have attached sample image, Thanks in advance :) Cheers! Best Regards, SHOAIB AHMED. http://about.me/shoaib.mw

1 0

Need to upgrade from Ubuntu 12 to 14
by Dano, Leo 06 Jun '16

06 Jun '16

Hello All, Our Corp Linux images keep us from using the Canonical way to upgrade, which means I need to reimage my server with Ubuntu 14. My question is what is the process in backing up and restoring all the Observium pieces? Thanks, ----------------------- Leo Dano

4 7

Syslog Rules
by Serghei Golipad 06 Jun '16

06 Jun '16

Guys, First of all a big thank you for finally implementing Syslog alerts!!! ☺ I have a bit of a problem, I’m unable to delete Syslog Rule i.e. there is no option to do so, I guess this is still in progress / experimental? Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

1 0

Apps graphs in Observium
by Mads Boye 06 Jun '16

06 Jun '16

Hello. I am using Observium to monitor two postfix servers. However the APPS summary site, does not show the postfix graph. From what i can gather it seems that there is a mismatch in what application name the apps overview page uses and the apps subpage for the individual server. i.e. the postfix server app subpage calls http://observium.my.server.bla/graphs/to=1465199547/id=10/type=applicat ion_postfix_sent/from=1465113147/ and the apps overview calls: http://observium.monitor.srv.aau.dk/graphs/to=1465199603/from=146511320 3/legend=no/type=application_postfix_mailgraph_sent/id=10/ if i remove the "mailgraph" part form the last link the correct graph shows. I've tried to add the postfix application to the "includes/definitions/apps.inc.php with no luck. If the application name is correct it cannot find the graph postfix_sent etc. <?php // Definitions related to the applications system // Application graph definitions $config['app']['moodle']['top'] = array('users', 'mobile'); $config['app']['varnish']['top'] = array('backend', 'cache', 'lru'); $config['app']['postfix_mailgraph']['top'] = array('sent', 'spam', 'reject'); // End application definitions I might be overlooking something or doing it wrong, but it seems that the mismatch should be corrected? I have added both postfix scripts form scripts/agent-local And a second question. I've made a custom Observium app for monitoring an application, which is working fine. My problem is that i wish to extend the agent to monitor some extra paramters. RRDtool now says that there is no entry for the new DS in the rrd file. Is there a way to update the RRD file, so i do not have to delete it and loose the historical data from the other parts that i monitor? Let me know if you need additional informations on both problems. Best Regards, Mads.

1 0

Rancid integration - Cannot see old versions anymore
by Andy Lemin 03 Jun '16

03 Jun '16

Hi, Hopefully this will be a simple question and I've just misconfigured something, anyway.. We have rancid working great before, and when you go to the Config tab, it showed you the latest configuration, as well as the configuration revision history. However after upgrading the server to Jessie (probably unrelated but seemed to break a couple weeks around this time), we now only see the latest config only and not the history anymore? We have these settings; $config['rancid_configs'][] = "/var/lib/rancid/observium/configs/"; $config['rancid_ignorecomments'] = 0; And we have done this; http://www.observium.org/docs/rancid/ It all works, just only shows the most recent? We need to roll some config back and couldn't.. Cheers, Andy. -- *Download our latest free guide here <https://www.brandwatch.com/competitive-intelligence-guide/>*

2 1

Recent Events timestamps
by Jacob Bisby 03 Jun '16

03 Jun '16

Hi all I've just migrated our Observium installation over to a PHP7 based install (much quicker than the PHP5 based install so far). Everything seems fine except for the Recent Events list on the front page - the "time" counter since the event occurred has started getting stuck at 0 seconds for some reason, but the tooltip that pops up when you mouse over the 0s timestamps shows the correct time that the event occurred at. Is PHP7 a no-no for Observium at this point? - Jacob Bisby

2 4

Re: [Observium] Group bug
by Laszlo Nemeth 02 Jun '16

02 Jun '16

Yes, you are right ☺ So ok, the Ports menu shows the groups that contain ports group and we have two groups menu now (Globe, Ports). :) Sorry. But in this case I think the Ports -> Groups has to be the default value is the “Port”. Like in the Globe->Groups there is the “All” is the default value. But nothing in the Ports->Groups. It shows nothing until I press the “Port” on this page. Laszlo From: observium <observium-bounces(a)observium.org> on behalf of Adam Armstrong <adama(a)memetic.org> Reply-To: Observium Network Observation System <observium(a)observium.org> Date: Thursday 2 June 2016 at 16:10 To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Group bug Are you honestly asking why non-ports groups dont show in the ports menu? Oo Adam. Sent from BlueMail<http://www.bluemail.me/r> On 2 Jun 2016, at 10:54, Laszlo Nemeth <laszlo.nemeth(a)emarsys.com<mailto:laszlo.nemeth@emarsys.com>> wrote: Hello We used the 7793. Added 3 group with interface sum in the Ports menu. Later add 2 sensors group there. The Ports menu shows 3 member, but there was 5. (3 interface, 2 sensors). If we click to the Sensors we see our sensors groups. Now we upgraded to 7900. We see the Group in the Ports menu AND the first menu too! The first menu shows 5, the Ports shows 3 groups. Click on the first menu’s groups: shows all 5 groups. Great ☺ Click on the Ports menu’s group: shows nothing. But there if I click to the “ALL”, it shows 5 groups (3 interfaces, 2 sensors). Laszlo ________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 3

Group bug
by Laszlo Nemeth 02 Jun '16

02 Jun '16

Hello We used the 7793. Added 3 group with interface sum in the Ports menu. Later add 2 sensors group there. The Ports menu shows 3 member, but there was 5. (3 interface, 2 sensors). If we click to the Sensors we see our sensors groups. Now we upgraded to 7900. We see the Group in the Ports menu AND the first menu too! The first menu shows 5, the Ports shows 3 groups. Click on the first menu’s groups: shows all 5 groups. Great ☺ Click on the Ports menu’s group: shows nothing. But there if I click to the “ALL”, it shows 5 groups (3 interfaces, 2 sensors). Laszlo

3 2

Fallback auth support?
by Laszlo Nemeth 02 Jun '16

02 Jun '16

Hi Is the Observium support the fallback authentication? Example I use LDAP but if the Ldap server is not reachable can it fallback to local mysql DB? Laszlo

2 2

About Observium
by Mohd Zainal Abidin Rabani 01 Jun '16

01 Jun '16

Hi, Is it possible observium capture bandwidth base on each port include ip addess that host on each port? If possible please guide me to configure it. Thanks.

1 0

Device_ping graph acces on observium WebUI
by PROST pierrick 31 May '16

31 May '16

Hi everyone, when i receive mail alert, there is a Device_Ping graph inserted. I didn't find him on the WebUI, where is it ? Regards. Pierrick Prost

2 2

No script for testing SMTP configuration
by PROST pierrick 31 May '16

31 May '16

Hello, I follow the documentation for configuring SMTP mail : http://www.observium.org/docs/config_options/ For testing , it seem to have a "test_mail.php", I'm on Observium Professional 0.16.5.7857 but nothing on my root directory. Pierrick

2 7

Centos 6 Installation
by Mohd Zainal Abidin Rabani 31 May '16

31 May '16

Hi, Some of the package not available on centos 6. Please update the installation document. Regards, Mohd Zainal Abidin Rabani Technical Support

3 3

Calendar bug?
by Eduardo Schoedler 31 May '16

31 May '16

Hi, I think my observium doesn't like pair months, just odd ones :) Please see attachment. Thanks. -- Eduardo Schoedler

3 6

BGP peers updated
by Arnaud Launay 30 May '16

30 May '16

Hello, We use the stable licensed SVN version of Observium. Since the beginning of April, we have several times a day those messages: 2016-04-07 12:37:24 edge.dc2 edge.dc2.dom.tld Bgp-peers: 6 updated, 49 unchanged. 2016-04-07 06:35:19 edge.dc2 edge.dc2.dom.tld Bgp-peers: 6 updated, 49 unchanged. 2016-04-07 00:41:10 edge.dc2 edge.dc2.dom.tld Bgp-peers: 6 updated, 49 unchanged. (... more of the same ...) 2016-05-25 12:37:02 edge.dc2 edge.dc2.dom.tld Bgp-peers: 6 updated, 49 unchanged. 2016-05-25 06:36:33 edge.dc2 edge.dc2.dom.tld Bgp-peers: 6 updated, 49 unchanged. 2016-05-25 00:38:06 edge.dc2 edge.dc2.dom.tld Bgp-peers: 6 updated, 49 unchanged. Routers (we have this on several) are Juniper MX5. Analysis of the logs reveals that nothing has moved on the bgp side, no flap, no event, peers are steady. I've tried to look into what pushes Observium to emit those messages, but I'm a bit lost. Any ideas ? Thanks, Arnaud.

5 20

Disable re-alert interval
by Gumilar Siegfried 30 May '16

30 May '16

Anyone? Von: observium [mailto:observium-bounces@observium.org] Im Auftrag von Gumilar Siegfried Gesendet: Mittwoch, 25. Mai 2016 10:35 An: Observium Network Observation System (observium(a)observium.org) Betreff: [Observium] Disable re-alert interval Hello, Observium re-alerts on a configurable interval with the "$config['alerts']['interval']" setting. We don't want any re-alerts. Is there a way to disable the re-alerts entirely? Setting it to 0 would be a good idea to implement this. Regards, Siegfried

1 0

global template settings
by Martijn Fennis 30 May '16

30 May '16

Hi, first time user of observium and i like the info that i can get with it. The documentation is probably behind the "client-area" @ observium.org? I have no idea if it matters whenever i change the type from "server" to "firewall", does it apply other MIB's to the device? I am trying to figure out how i can minimize the amount of polling bandwidth. I see there is a "global-setting" or "device-setting" but how to modify those globally @ template? Regards, Martijn

2 1

mailgraph not diretcly accessible
by Neo 30 May '16

30 May '16

Hi Observium Team When i try to access the postfix mailgraph plugin directly, it doesn't show up. If i open it via Devices -> Apps -> Postfix Mailgraph it shows all graphs correctly. Why? How to solve? Please see attached screenshots. Thank you.

1 0

Citrix ICA and/or RDP Login count
by Richard Wigzell 30 May '16

30 May '16

Hello, this maybe a malformed question but has anyone used Observium to graph Citrix ICA or Remote Desktop logins / session count? I am guessing this could only be done with a WMI query so no? but thought I would ask. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

2 1

Re: [Observium] can't resolve host, but I can ping it
by Dev 28 May '16

28 May '16

Thanks Adam, that worked. The strange thing is when I run ./discovery.php -h all It enumerates hundreds of network devices by IP that aren’t listed in /etc/hosts, but for some reason it doesn’t populate them all in the web GUI > Devices, so I guess I have to write something that converts all those IP’s to hostnames and adds them all to /etc/hosts, which seems hard. Am I missing something? Does the enterprise version resolve IP’s? Now I have to figure out why it’s not polling the interfaces on the devices it added successfully to create traffic graphs, though I made the crontab entries as specified in the install docs. > Use a hostname. > > The current CE won't allow addition of devices by IP. > >Adam. > >Sent from BlueMail > > > On 26 May 2016, 22:16, at 22:16, Dev <dev(a)logicalwebhost.com> wrote: > ./add_device.php 1.2.3.4 catalyst v1 > > fails with > > Try to add 1.2.3.4: > Could not resolve 1.2.3.4. > Devices failed: 1. > > but ping works > > fping 1.2.3.4 > 1.2.3.4. is alive > > but snmpwalk works like: > > snmpwalk -v 1 -c catalyst 1.2.3.4 > iso.3.6.1.2.1.1.1.0 = STRING: "Cisco IOS Software, Catalyst… > ... > > The web interface add device also fails same way. what am I missing?

1 0

Proxmox Graph Configuration
by PROST pierrick 27 May '16

27 May '16

Hy everyone, There is a special configuration for ProxMox (Ve 4) for observium ? Regards.

2 1

Discards reporting incorectly
by Andy Lemin 27 May '16

27 May '16

Hi, We have noticed an interesting problem where on all of our OpenBSD firewalls, every single interface on the same firewall reports the same discards rate. We would like to try and work out which interface these discards are actually happening on, so we can work out what the cause is and check for a possible remedy (wrong VLANs being trunked through for example). If they are bad checksums, than that's ok. But would like to know ;) Below is a screenshot showing the "Errors" graphs for all ports on the same server, notice how they are all displaying the same data. My thoughts of how to start are; What is the SNMP OID being polled for this information? I wonder if OpenBSD is incorrectly reporting the same value on all interfaces, or if there is only a single Discards counter/OID for the whole system, or if it is an Observium problem etc.. So if anyone can tell me the OID, I can do some more investigation first ;) I don't mind setting up OID mappings in SNMPD etc, if that is required I would be happy to provide a configuration template for Observium and OpenBSD. And I also wonder how up to date the OpenBSD MIB file built into Observium is? Thanks in advance for your help :) Kind regards, Andy.

4 8

can't resolve host, but I can ping it
by Dev 26 May '16

26 May '16

./add_device.php 1.2.3.4 catalyst v1 fails with Try to add 1.2.3.4: Could not resolve 1.2.3.4. Devices failed: 1. but ping works fping 1.2.3.4 1.2.3.4. is alive but snmpwalk works like: snmpwalk -v 1 -c catalyst 1.2.3.4 iso.3.6.1.2.1.1.1.0 = STRING: "Cisco IOS Software, Catalyst… ... The web interface add device also fails same way. what am I missing?

2 1

Graph error on ipv6 host
by Anders Alavik 26 May '16

26 May '16

HI! I added 2 new routers direct with ipv6 direct in cli. Every thing works nice exept the aggregated graphs were the 2 new routers are a part. My guess is that its the name’s on the routers thats are the problem. they are just named as the ipv6 address. Med Vänliga Hälsningar Anders Alavik anders(a)bogalnet.se <mailto:anders@bogalnet.se> / 0322 - 64 24 71 BogalNet AB Alvhemsgatan 3 447 30 Vårgårda http://www.bogalnet.se <http://www.bogalnet.se/>

2 1

Re: [Observium] observium Digest, Vol 70, Issue 88
by Gaurav Chaturvedi 26 May '16

26 May '16

Hello Adam, Regret for the delay, kindly find the attached files containing the output of the commnad. ./poller.php -h <device> -m unix-agent,applications -d Regards Gaurav On Fri, May 20, 2016 at 4:30 PM <observium-request(a)observium.org> wrote: > Message: 2 > Date: Thu, 19 May 2016 12:34:09 +0100 > From: Adam Armstrong <adama(a)memetic.org> > To: Observium Network Observation System <observium(a)observium.org> > Cc: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Help needed with unix-agent > Message-ID: <9c7c1b52-f513-4f8d-8720-82d898fc3b47(a)typeapp.com> > Content-Type: text/plain; charset="utf-8" > > ./poller.php -h <device> -m unix-agent,applications -d > > Adam. > > Sent from BlueMail > >

1 0

Missing BGP Peers
by Duncan Mossop 25 May '16

25 May '16

Afternoon, Before I open a ticket with JTAC, I have a Juniper MX router that currently displays no BGP peer data (it used to once upon a time). I ran ./poller.php -h <device_id> -m bgp-peers –d against it and got the attached output. I also get the below every day or so: [cid:image001.png@01D1B683.F2B58B50] I could be wrong but from that log file it looks like the snmpwalk is returning data from the device? Could someone run their eyes over the log and see if they agree and if so where do I need to look next in order to resolve this issue? Thanks, Duncan Mossop • Operations Manager, SystemHOST Ltd ________________________________ dmossop(a)systemhost.co.uk [cid:imagee10b23.PNG@cbb8f5da.4085b26d] 01524 737414 systemhost.co.uk<http://www.systemhost.co.uk> [Twitter]<https://twitter.com/systemhost> Follow us on Twitter ________________________________ SystemHOST Ltd Registered office: Holmere Hall, Yealand Conyers, Carnforth, Lancs, LA5 9SN Registered in England No.05028996 VAT No. 927386490 This e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. By opening this email or its attachments, you accept liability for any damage that may be caused to your computer hardware, software or data. ________________________________

3 9

Alert Checker options
by Lyndon Labuschagne 25 May '16

25 May '16

Hi All Is there a way of removing a subset of device names from the alert checker configs, i.e. !somename.* * or NOT EQUAL somename.* * or similar so if there are devices that I want to graph, but dont care if they are up or down. Which brings me to another point I guess, is there a way of not showing certain things on the dashboard or diminishing the value / time of a notified device, I dont need to know about a rebooted device for 24 hours, also is there are 2 or 3 errors on an interface I may not need to know about them, and as per above I may only want to graph traffic on a device if it is up, and dont need to know if it isnt up

2 6

Disable re-alert interval
by Gumilar Siegfried 25 May '16

25 May '16

Hello, Observium re-alerts on a configurable interval with the "$config['alerts']['interval']" setting. We don't want any re-alerts. Is there a way to disable the re-alerts entirely? Setting it to 0 would be a good idea to implement this. Regards, Siegfried

1 0

Missing module "LM-SENSORS-MIB"
by kontakt＠leonkrieg.de 24 May '16

24 May '16

Since we've upgraded to Observium Professional 0.16.5.7872, we are getting an error about a missing MIB file every 30 minutes: > MIB search path: /opt/observium/mibs > Cannot find module (LM-SENSORS-MIB): At line 0 in (none) It seems like older versions of Observium have this file but the latest one hasn't. How should we go about fixing this error? Sincerely, Leon

2 2

Error Adding Device
by Mohd Zainal Abidin Rabani 24 May '16

24 May '16

Hi, Getting this error: observium@observium-desktop:/opt/observium$ ./add_device.php -d 10.2.30.2 N0c53rd0tn3t v2c DEBUG! SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema';] SQL RUNTIME[0.00069404s] SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'current_rev';] SQL RUNTIME[0.00053310s] SQL[SELECT * FROM `config`] SQL RUNTIME[0.00061989s] CMD[/bin/hostname -f] EXITCODE[0] CMD RUNTIME[0.0076s] STDOUT[ observium-desktop ] Observium CE 0.16.1.7533 Add Device(s) CMD[/opt/observium/scripts/distro] EXITCODE[0] CMD RUNTIME[0.38s] STDOUT[ Linux|4.4.0-21-generic|amd64|Ubuntu|16.04 ] CMD[/usr/bin/env python --version 2>&1] EXITCODE[0] CMD RUNTIME[0.0565s] STDOUT[ Python 2.7.11+ ] SQL[SELECT version();] SQL RUNTIME[0.00033402s] CMD[/usr/bin/snmpget --version 2>&1] EXITCODE[0] CMD RUNTIME[0.1467s] STDOUT[ NET-SNMP version: 5.7.3 ] CMD[/usr/bin/rrdtool --version |head -n1] EXITCODE[0] CMD RUNTIME[0.2724s] STDOUT[ RRDtool 1.5.5 Copyright by Tobias Oetiker <tobi(a)oetiker.ch> ] SQL[SELECT TIMEDIFF(NOW(), UTC_TIMESTAMP);] SQL RUNTIME[0.02811098s] CMD[/usr/bin/env apache2 -v | awk '/Server version:/ {print $3}'] EXITCODE[0] CMD RUNTIME[0.1172s] STDOUT[ Apache/2.4.18 ] SQL[SELECT @@sql_mode;] SQL RUNTIME[0.02187586s] SQL[SHOW VARIABLES LIKE 'character_set_connection'] SQL RUNTIME[0.02842999s] ##### Software versions ##### o OS Linux 4.4.0-21-generic [amd64] (Ubuntu 16.04) o Apache 2.4.18 o PHP 7.0.4-7ubuntu2 o Python 2.7.11+ o MySQL 5.7.12-0ubuntu1 (extension: mysqli 5.0.12-dev) o SNMP NET-SNMP 5.7.3 o RRDtool 1.5.5 ##### MySQL mode ##### o MySQL ONLY_FULL_GROUP_BY,STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FO R_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION ##### Charset info ##### o PHP UTF-8 o MySQL utf8 ##### Timezones info ##### o Date Tuesday, 24-May-16 09:55:39 MYT o PHP +08:00 o MySQL +08:00 Try to add 10.2.30.2: SQL[SELECT COUNT(*) FROM `devices` WHERE `hostname` = '10.2.30.2'] SQL RUNTIME[0.00078392s] Could not resolve 10.2.30.2. Devices failed: 1. USAGE: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] add_device.php <hostname> [any|nanp|anp|ap] [v3] [user] [password] [enckey] [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6] add_device.php <filename> EXAMPLE: SNMPv1/2c: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] SNMPv3 : Defaults : add_device.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6] No Auth, No Priv : add_device.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6] Auth, No Priv : add_device.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6] Auth, Priv : add_device.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6] FILE : add_device.php <filename> ADD FROM FILE: To add multiple devices, create a file in which each line contains one device with or without options. Format for device options, the same as specified in USAGE. OPTIONS: -p Skip icmp echo checks, device added only by SNMP checks DEBUGGING OPTIONS: -d Enable debugging output. -dd More verbose debugging output. -t Do not add device(s), only test auth options. Need advice please. Regards, Mohd Zainal Abidin Rabani Technical Support

4 4

Monitor by Port
by Mohd Zainal Abidin Rabani 24 May '16

24 May '16

Hi, Is it possible to monitor bandwidth on each port? The document not so complete. Regards, Mohd Zainal Abidin Rabani Technical Support

1 0

Error WebUI
by Mohd Zainal Abidin Rabani 24 May '16

24 May '16

Hi, I'm using this monitor for internal use. We do not have dns. We are setting using alias. Here is from httpd.conf Alias /monitor "/opt/observium/html/" <Directory "/opt/observium/html/"> AllowOverride All Options FollowSymLinks MultiViews </Directory> But when click a link in webIU, we getting error as attached. Please advice. Regards, Mohd Zainal Abidin Rabani Technical Support Hosting Technology

3 3

Alias HTTPD
by Mohd Zainal Abidin Rabani 24 May '16

24 May '16

Hi, Is it possible to do alias using httpd? We do not have domain. This is for internal use only. OS: Centos 6.7 x64 Regards, Mohd Zainal Abidin Rabani Technical Support

2 1

Re: [Observium] Unable to access SVN
by Serghei Golipad 23 May '16

23 May '16

Same here, asking for auth and fails. From: observium <observium-bounces(a)observium.org> on behalf of "chott(a)praha1.net" <chott(a)praha1.net> Reply-To: Observium Network Observation System <observium(a)observium.org> Date: Monday, 23 May 2016 at 16:40 To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Unable to access SVN Yes, i have same problem today Tom From: observium [mailto:observium-bounces@observium.org] On Behalf Of Dominik Nowacki Sent: Monday, May 23, 2016 5:36 PM To: observium(a)observium.org Subject: [Observium] Unable to access SVN Hi, We’re unable to access SVN using our valid subscription (unauthorised error, yes username and password is definitely correct) and I don’t see a better place to contact the team about it. How do we get assistance? Thanks! Kind Regards, Dom PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

3 3

Unable to access SVN
by Dominik Nowacki 23 May '16

23 May '16

Hi, We're unable to access SVN using our valid subscription (unauthorised error, yes username and password is definitely correct) and I don't see a better place to contact the team about it. How do we get assistance? Thanks! Kind Regards, Dom

2 1

Alerting debugging
by Dominik Nowacki 23 May '16

23 May '16

Hi All, I was wondering if there is any way of debugging pushover alerts? We have an entry in the alert log about the "Alert notification sent". The message was never delivered (we use Pushover), and the Application info in the Pushover interface doesn't say there was any message attempted. How to debug it? We're on Observium 0.16.5.7823 (stable) Thanks! Kind Regards, Dom

2 1

subscription past_due DOH
by Simon Smith 23 May '16

23 May '16

Hi All our subscription ran out yesterday and we forgot to change our card details so our subscription wasn’t renewed I’ve clicked the modify button on our subscription on the subs page and updated our details now what do i do? how long does it take? the is another button at the bottom of the page saying 'Purchase Subscription' and I’m worried if i do that ill get a new user and pass OR be charged twice also the is no contact information on the Observium website hense why I’m having to email the General list instead Regards Simon

2 5

Smokeping for alerts
by Andrew Colin 23 May '16

23 May '16

Hi Guys Is it possible to use smokeping to do the checks and send alerts vs the normal way? I find smokeping to be more reliable Regards Andrew

2 1

Adding device fail
by Mohd Zainal Abidin Rabani 21 May '16

21 May '16

Hi, Where i can see log that show detail about error/fail? Last time i adding device using ubuntu, no problem. Regards, Mohd Zainal Abidin Rabani Technical Support

2 1

Alert Dependencies
by Spencer Ryan 21 May '16

21 May '16

I've asked about this before but how hard would it be for you guys to implement alert dependencies? The easiest way I can think of doing it would be to simply let us set a "parent" device for anything, and if that device is offline don't send any alerts for downstream devices. For example we have a testlab that has no UPS/Generator power that we monitor about 200 devices, when the building loses power we get those 200 alarms about devices being offline, when in reality there is a single 6500 as the gateway, and if that switch is offline, i know the rest will be. We don't want to disable the offline alarms because we do want to know when individual devices drop out. Thanks! *Spencer Ryan* | Senior Systems Administrator | sryan(a)arbor.net *Arbor Networks* +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com

3 8

Re: [Observium] monitoring fileZilla ftp server on Windows 2008R2 bestpractice ?
by PROST pierrick 20 May '16

20 May '16

I extend my question :) .... generally : - for a Windows 2K server , how can we do service monitoring ? - for web server , how can we run check tcp/udp ports 80 - 8080 over network ? regards ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Which is the best way to monitore à fileZilla ftp server runing on windows Server 2008R2 with observium ? Can I run à check on port 21 from observium poller ? We have just taken the annual support for observium ... nice tools! Regards. Pierrick Prost Service du Système d'Information CNRS Délégation Régionale Rhône Auvergne 2, avenue Albert Einstein - BP61335 69609 VILLEURBANNE CEDEX www.dr7.cnrs.fr<http://www.dr7.cnrs.fr>

2 3

RRD Files - Error Drawing Graph - Before you groan, its limited to OpenBSD and I have an RRDCommand.. ; )
by Andy Lemin 20 May '16

20 May '16

Hi, On Observium commercial, all of our OpenBSD firewalls fail to draw the "Processors" graph on the device Overview page :( However if you go to the "Graphs" tab on the Device page, the "Processors" graphs do draw.. It seems to only be limited to the "Overview" tab on the device page. Our Linux servers, Cisco, HP gear etc are all fine. For both the OpenBSD firewalls and the Linux servers, the Processors graph on the Overview page seems to be based on "Device (ucd_ss_cpu)". But the Processors graph which does work looks to be based on "Device (processor)". So it seems that "Device (ucd_ss_cpu)" is not populated for OpenBSD, where Observium thinks it should be. Here is the RRD Command for a failing one; root@intermap:/opt/observium/rrd/ar1406.live.brandwatch.net# /usr/bin/rrdtool graph /tmp/11MUfpl7O7LSQtoX.png -g -Y --lower-limit 0 --alt-autoscale-max --start 1463587788 --end 1463674188 --width 1152 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DroidSansMono,DejaVuSansMono' --font AXIS:7:'DroidSansMono,DejaVuSansMono' --font-render-mode normal -E COMMENT:' Now Min Max Avg' COMMENT:'\l' CDEF:total= HRULE:0#555555 ERROR: String ends after the = sign on 'CDEF:total=' Here is the RRD Command for a Linux device which works; root@intermap:/opt/observium/rrd/ar1406.live.brandwatch.net# /usr/bin/rrdtool graph /tmp/vskuqlACvSuyBGUW.png -g -Y --lower-limit 0 --alt-autoscale-max --start 1463587973 --end 1463674373 --width 1152 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DroidSansMono,DejaVuSansMono' --font AXIS:7:'DroidSansMono,DejaVuSansMono' --font-render-mode normal -E COMMENT:' Now Min Max Avg' COMMENT:'\l' DEF:ssCpuRawUser=/opt/observium/rrd/ ar1406.live.brandwatch.net/ucd_ssCpuRawUser.rrd:value:AVERAGE DEF:ssCpuRawNice=/opt/observium/rrd/ ar1406.live.brandwatch.net/ucd_ssCpuRawNice.rrd:value:AVERAGE DEF:ssCpuRawSystem=/opt/observium/rrd/ ar1406.live.brandwatch.net/ucd_ssCpuRawSystem.rrd:value:AVERAGE DEF:ssCpuRawWait=/opt/observium/rrd/ ar1406.live.brandwatch.net/ucd_ssCpuRawWait.rrd:value:AVERAGE DEF:ssCpuRawInterrupt=/opt/observium/rrd/ ar1406.live.brandwatch.net/ucd_ssCpuRawInterrupt.rrd:value:AVERAGE DEF:ssCpuRawSoftIRQ=/opt/observium/rrd/ ar1406.live.brandwatch.net/ucd_ssCpuRawSoftIRQ.rrd:value:AVERAGE DEF:ssCpuRawKernel=/opt/observium/rrd/ ar1406.live.brandwatch.net/ucd_ssCpuRawKernel.rrd:value:AVERAGE DEF:ssCpuRawIdle=/opt/observium/rrd/ ar1406.live.brandwatch.net/ucd_ssCpuRawIdle.rrd:value:AVERAGE CDEF:total=ssCpuRawUser,UN,0,ssCpuRawUser,IF,ssCpuRawNice,UN,0,ssCpuRawNice,IF,ssCpuRawSystem,UN,0,ssCpuRawSystem,IF,ssCpuRawWait,UN,0,ssCpuRawWait,IF,ssCpuRawInterrupt,UN,0,ssCpuRawInterrupt,IF,ssCpuRawSoftIRQ,UN,0,ssCpuRawSoftIRQ,IF,ssCpuRawKernel,UN,0,ssCpuRawKernel,IF,ssCpuRawIdle,UN,0,ssCpuRawIdle,IF,+,+,+,+,+,+,+ CDEF:ssCpuRawUser_perc=ssCpuRawUser,total,/,100,* CDEF:ssCpuRawNice_perc=ssCpuRawNice,total,/,100,* CDEF:ssCpuRawSystem_perc=ssCpuRawSystem,total,/,100,* CDEF:ssCpuRawWait_perc=ssCpuRawWait,total,/,100,* CDEF:ssCpuRawInterrupt_perc=ssCpuRawInterrupt,total,/,100,* CDEF:ssCpuRawSoftIRQ_perc=ssCpuRawSoftIRQ,total,/,100,* CDEF:ssCpuRawKernel_perc=ssCpuRawKernel,total,/,100,* CDEF:ssCpuRawIdle_perc=ssCpuRawIdle,total,/,100,* HRULE:0#555555 AREA:ssCpuRawUser_perc#c02020:'User ' GPRINT:ssCpuRawUser_perc:LAST:%5.1lf%% GPRINT:ssCpuRawUser_perc:MIN:%5.1lf%% GPRINT:ssCpuRawUser_perc:MAX:%5.1lf%% GPRINT:ssCpuRawUser_perc:AVERAGE:%5.1lf%%\n AREA:ssCpuRawNice_perc#008f00:'Nice ':STACK GPRINT:ssCpuRawNice_perc:LAST:%5.1lf%% GPRINT:ssCpuRawNice_perc:MIN:%5.1lf%% GPRINT:ssCpuRawNice_perc:MAX:%5.1lf%% GPRINT:ssCpuRawNice_perc:AVERAGE:%5.1lf%%\n AREA:ssCpuRawSystem_perc#ea8f00:'System ':STACK GPRINT:ssCpuRawSystem_perc:LAST:%5.1lf%% GPRINT:ssCpuRawSystem_perc:MIN:%5.1lf%% GPRINT:ssCpuRawSystem_perc:MAX:%5.1lf%% GPRINT:ssCpuRawSystem_perc:AVERAGE:%5.1lf%%\n AREA:ssCpuRawWait_perc#1f78b4:'Wait ':STACK GPRINT:ssCpuRawWait_perc:LAST:%5.1lf%% GPRINT:ssCpuRawWait_perc:MIN:%5.1lf%% GPRINT:ssCpuRawWait_perc:MAX:%5.1lf%% GPRINT:ssCpuRawWait_perc:AVERAGE:%5.1lf%%\n AREA:ssCpuRawInterrupt_perc#a6cee3:'Interrupt ':STACK GPRINT:ssCpuRawInterrupt_perc:LAST:%5.1lf%% GPRINT:ssCpuRawInterrupt_perc:MIN:%5.1lf%% GPRINT:ssCpuRawInterrupt_perc:MAX:%5.1lf%% GPRINT:ssCpuRawInterrupt_perc:AVERAGE:%5.1lf%%\n AREA:ssCpuRawSoftIRQ_perc#b2df8a:'SoftIRQ ':STACK GPRINT:ssCpuRawSoftIRQ_perc:LAST:%5.1lf%% GPRINT:ssCpuRawSoftIRQ_perc:MIN:%5.1lf%% GPRINT:ssCpuRawSoftIRQ_perc:MAX:%5.1lf%% GPRINT:ssCpuRawSoftIRQ_perc:AVERAGE:%5.1lf%%\n AREA:ssCpuRawKernel_perc#fb9a99:'Kernel ':STACK GPRINT:ssCpuRawKernel_perc:LAST:%5.1lf%% GPRINT:ssCpuRawKernel_perc:MIN:%5.1lf%% GPRINT:ssCpuRawKernel_perc:MAX:%5.1lf%% GPRINT:ssCpuRawKernel_perc:AVERAGE:%5.1lf%%\n AREA:ssCpuRawIdle_perc#f5f5e5:'Idle ':STACK GPRINT:ssCpuRawIdle_perc:LAST:%5.1lf%% GPRINT:ssCpuRawIdle_perc:MIN:%5.1lf%% GPRINT:ssCpuRawIdle_perc:MAX:%5.1lf%% GPRINT:ssCpuRawIdle_perc:AVERAGE:%5.1lf%%\n 1233x339 Failing OpenBSD Example; Working Linux Example; Thank you very much for your time, and a great system. The more I use Observium, the more I love it. Cheers, Andy.

3 6

monitoring fileZilla ftp server on Windows 2008R2 bestpractice ?
by PROST pierrick 20 May '16

20 May '16

Hi Everyone, Which is the best way to monitore à fileZilla ftp server runing on windows Server 2008R2 with observium ? Can I run à check on port 21 from observium poller ? We have just taken the annual support for observium ... nice tools! Regards. Pierrick Prost Service du Système d'Information CNRS Délégation Régionale Rhône Auvergne 2, avenue Albert Einstein - BP61335 69609 VILLEURBANNE CEDEX www.dr7.cnrs.fr<http://www.dr7.cnrs.fr>

1 0

Package not available
by Mohd Zainal Abidin Rabani 20 May '16

20 May '16

Hi, I saw some package not available on centos 6.7 when install using yum. Any workaround for this issue? No package php-posix.x86_64 available. No package php-mcrypt.x86_64 available. No package vixie-cron.x86_64 available. No package fping.x86_64 available. Regards, Mohd Zainal Abidin Rabani Technical Support

1 0

Ownership
by Mohd Zainal Abidin Rabani 20 May '16

20 May '16

Hi, Is this correct ownership? [root@observium observium]# ll total 204 -rwxrwxr-x 1 1000 1000 8432 Jan 15 16:37 add_device.php -rwxrwxr-x 1 1000 1000 1890 Jan 15 16:37 adduser.php -rwxrwxr-x 1 1000 1000 3629 Jan 15 16:37 alerter.php -rwxrwxr-x 1 1000 1000 943 Jan 15 16:37 alerts.php -rwxrwxr-x 1 1000 1000 1571 Jan 15 16:37 check-errors.php -rwxrwxr-x 1 1000 1000 2548 Jan 15 16:37 check-services.php -rw-r--r-- 1 root root 1001 May 19 18:17 config.php -rw-rw-r-- 1 1000 1000 998 Dec 17 13:17 config.php.default -rw-rw-r-- 1 1000 1000 466 Jan 15 16:37 config_to_json.php -rwxrwxr-x 1 1000 1000 1272 Jan 15 16:37 delete_device.php -rwxrwxr-x 1 1000 1000 7994 Jan 16 00:03 discovery.php -rwxrwxr-x 1 1000 1000 4042 Jan 15 16:37 housekeeping.php drwxrwxr-x 10 1000 1000 4096 May 4 20:38 html drwxrwxr-x 14 1000 1000 4096 Jan 26 22:35 includes -rw-rw-r-- 1 1000 1000 165 Oct 4 2015 INSTALL -rwxrwxr-x 1 1000 1000 10750 Jan 15 16:37 irc.php drwxrwxr-x 7 1000 1000 4096 Jan 15 16:37 libs -rw-rw-r-- 1 1000 1000 2323 Jan 26 22:35 LICENSE.COMMUNITY drwxr-xr-x 2 root root 4096 May 20 09:32 logs drwxrwxr-x 156 1000 1000 24576 Jan 20 00:01 mibs -rwxrwxr-x 1 1000 1000 7236 Jan 15 16:37 poller.php -rwxrwxr-x 1 1000 1000 14763 Oct 4 2015 poller-wrapper.py -rw-rw-r-- 1 1000 1000 990 Oct 4 2015 README -rwxrwxr-x 1 1000 1000 1670 Jan 15 16:37 rename_device.php drwxr-xr-x 2 apache apache 4096 May 19 18:19 rrd drwxrwxr-x 4 1000 1000 4096 Jan 26 17:21 scripts -rw-rw-r-- 1 1000 1000 29 Oct 4 2015 snmp.conf.example -rw-rw-r-- 1 1000 1000 385 Oct 4 2015 snmpd.conf.example -rwxrwxr-x 1 1000 1000 1033 Jan 15 16:37 snmptrap.php -rwxrwxr-x 1 1000 1000 1468 Jan 15 16:37 syslog.php drwxrwxr-x 5 1000 1000 4096 Oct 4 2015 templates -rwxrwxr-x 1 1000 1000 1818 Jan 15 16:37 test_alert.php drwxrwxr-x 4 1000 1000 4096 Jan 15 16:37 tests drwxrwxr-x 2 1000 1000 12288 Jan 16 22:05 update OS: Centos 6.7 Final x86_64. Regards, Mohd Zainal Abidin Rabani Technical Support

2 1

Help needed with unix-agent
by Gaurav Chaturvedi 19 May '16

19 May '16

Hello, I have installed ubuntu on virtual machine, configured bind and unix-agent successfully, in observium were able to see the application "bind" and all the graphs related to bind were displayed. After few days, I made a copy of vmware virtual machine (on which bind was running), added it to observium (with new IP), telnet to 36605 shows the output related to bind but observium showing that no application is running on the new virtual machine. so, 2 queries: 1) what am i missing? 2) How to debug step by step Regards Gaurav

4 6

Getting error
by Mohd Zainal Abidin Rabani 19 May '16

19 May '16

Hi, I'm getting error when try access detail about my swicth. I already add device from CLI. I want to see detail in webUI. This error get from ubuntu 16.04 LTS. Refer attachment. Now i try to install using centos 6. I want to see if same error come out. Regards, Mohd Zainal Abidin Rabani Technical Support ModernOne Data Solutions Sdn. Bhd. [ Dedicated Server | VPS | Co-Location | Hosting ] [ Managed Service | System Integration | Domain ] W : www.nocser.net FB: http://www.facebook.com/nocser Twitter: @nocsertech Skype: zabidin5417

2 1

Re: [Observium] Missed Allowed Value in CDR/95th Percentile
by ChanTy 18 May '16

18 May '16

Any comment ? From: observium <observium-bounces(a)observium.org> on behalf of Ty Chan <ty.chan(a)corp.mekongnet.com.kh> Reply-To: Observium Network Observation System <observium(a)observium.org> Date: Monday, May 16, 2016 at 10:52 AM To: Observium Network Observation System <observium(a)observium.org> Subject: [Observium] Missed Allowed Value in CDR/95th Percentile Hi, Allowed value is usually missed from Billing report as below: any comment? Regards, chanty _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Juniper logical interface confuse
by Eduardo Schoedler 18 May '16

18 May '16

I think Observium is confusing interfaces. Just now I reactivated a logical unit in juniper (xe-0/0/1.1698) and Observium thinks is ae0.3550. In event log: 2016-05-17 19:36:27 ae0.3550 IP address added: 2804:x:x:x:x:x:x:x/126 2016-05-17 19:36:27 ae0.3550 IP address added: 177.x.x.x/30 2016-05-17 19:36:24 ae0.3550 Interface DELETED mark removed [image: Imagem inline 1] In Juniper: login@rtr> show interfaces snmp-index 544 *Logical interface xe-0/0/1.1698 *(Index 332) (*SNMP ifIndex 544*) Description: VLAN-xxxxxxxxxxxxxxx Flags: Up SNMP-Traps 0x0 VLAN-Tag [ 0x8100.1698 ] Encapsulation: ENET2 Input packets : 490 Output packets: 4075 Protocol inet, MTU: 1500 Flags: Sendbcast-pkt-to-re, User-MTU, Sample-input Addresses, Flags: Is-Preferred Is-Primary Destination: 177.x.x.x/30, Local: 177.x.x.x, Broadcast: 177.x.x.x Protocol inet6, MTU: 1500 Flags: User-MTU, Sample-input Addresses, Flags: Is-Preferred Is-Primary Destination: 2804:x:x:x:x:x:x:x/126, Local: 2804:x:x:x:x:x:x:x I will send in private the discovery to Mike and Adam. Thank you! -- Eduardo Schoedler

1 0

Brocade VDX Switch
by ffuentes 18 May '16

18 May '16

Hello Team, We just moved from Extreme to Brocade and found out that Observium does not detect properly the VDX Switch stack. It just has the logo with a "?". Any ideas if the VDX line from brocade will be add it to the Professional Version? Regards, -- Fernando Fuentes Supervisor & Senior Systems Administrator Email: ffuentes(a)aasteel.com American Alloy Steel, Inc. Houston, Texas Website: http://www.aasteel.com Phone: 713-744-4222 Fax: 713-300-5688

4 13

DPKG version listing order
by Alex Winder ( M5i Limited ) 17 May '16

17 May '16

Hi all, We've recently added the DPKG agent to some of our Debian hosts so that we can keep on top of what's up-to-date and what isn't. So far it's been quite helpful, except I have one small niggle with it, the way that it lists the version orders of the packages. See below: The nginx version on the above are listed in the order of: 1.8.0 1.8.1 1.9.11 1.9.12 1.9.14 1.9.15 1.9.5 1.9.9 Where if they were listed in version order they would be listed: 1.8.0 1.8.1 1.9.5 1.9.9 1.9.11 1.9.12 1.9.14 1.9.15 Is there anyway that this can be worked around, or is there any plan to implement a fix? Thanks, Alex.

2 1

Re: [Observium] Citrix Netscaler vServer
by Richard Wigzell 16 May '16

16 May '16

Thank you all for the replies and screenshots; they have been most helpful. I have one more question regarding the custom OID monitor, has anyone used this to capture BPDU counters? Specific use case: We cannot currently send syslog messages from all our network devices to the Observium host and would be looking to use BPDU counters as an indication that a spanning-tree event had occurred. I would also be interested to hear what others have done regarding spanning-tree alerts etc. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/> From: observium [mailto:observium-bounces@observium.org] On Behalf Of Moerman, Maarten Sent: 13 May 2016 14:29 To: Observium Network Observation System Subject: Re: [Observium] Citrix Netscaler vServer Hi, See a LB vserver pool, and the vserver stats below: Vserver lists all services, and aggregated stats of the pool itself Service has: bits, packets, connections, requests, ttfb & surgecount There’s also more tcp stuff & ssl stuff in other tabs Maarten From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Adam Armstrong <adama(a)memetic.org<mailto:adama@memetic.org>> Reply-To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Date: Friday, May 13, 2016 at 1:39 PM To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Subject: Re: [Observium] Citrix Netscaler vServer Hi, We don't really have a trial beyond CE (which effectively is the trial), but if you guys have Netscalers, the 150 quid is certainly super cheap for the amount of data we collect from them. Our Netscaler support is developed in conjunction with eBay to monitor their load balancer platform, so it's one of the more actively developed parts of our code. If you ask nicely, perhaps someone will be able to generate some screenshots or something :D Adam. Sent from BlueMail<http://www.bluemail.me/r> On May 13, 2016, at 11:57, Richard Wigzell <richard.wigzell(a)it.ox.ac.uk<mailto:richard.wigzell@it.ox.ac.uk>> wrote: Thank you all for the replies. Is it possible to trial the subscription edition? We would be interested to see this functionality as well as the custom OID monitor. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/> From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 09 May 2016 14:19 To: Observium Network Observation System Subject: Re: [Observium] Citrix Netscaler vServer CE does not support netscaler, you need a subscription for that. Adam. Sent from BlueMail<http://www.bluemail.me/r> On May 9, 2016, at 15:14, prost pierrick <pierrick.prost(a)cnrs.fr<mailto:pierrick.prost@cnrs.fr>> wrote: Hello, Have you tried a SNMP WALK on your equipment ? De : observium [mailto:observium-bounces@observium.org] De la part de Richard Wigzell Envoyé : lundi 9 mai 2016 14:51 À : 'observium(a)observium.org<mailto:'observium(a)observium.org>' Objet : [Observium] Citrix Netscaler vServer Hello, we have a Citrix Netscaler (x2 HA) that we monitor but there is no Loadbalancer Tab on the device page. So we are unable to see vServers info etc. Have ensured that the SNMP view is FULL as opposed to Read only on the device themselves. Both nodes are running Citrix Netscaler NS10.5 (Build 57.7.nc) Running CE 0.16.1.7533 (26th January 2016). Am I correct in thinking that I should be able to see vServer info? If so some suggestions to resolve this would be welcome. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/> ________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Missed Allowed Value in CDR/95th Percentile
by ChanTy 16 May '16

16 May '16

Hi, Allowed value is usually missed from Billing report as below: any comment? Regards, chanty

1 0

VMware polling broken?
by Ron Marosko 15 May '16

15 May '16

Hi guys, I think something got broken in polling of ESXI servers… not sure where exactly, but on or about 4 May, the “Operating System” section changed from the full build information to “Operating system VMware (build-)”. In “showtech” it looks like it’s this line: features=>build- Or am I smoking a green leafy substance? ….Ron -- This message has been scanned by E.F.A. Project and is believed to be clean.

1 0

Alert on high availability status change on Checkpoint
by Robin Cook 13 May '16

13 May '16

Hello, We have a few checkpoint firewalls and I am looking to generate email alerts when the HA status changes from OK to critical. The Observium logs look a bit like this when it occurs: 2016-05-12 16:58:30 High Availability (standby) Status Alert: cpnew02 High Availability (standby) entered ALERT state: CRITICAL (previous: OK) 2016-05-12 16:58:28 cpfw04 Features -> ClusterXL inactive or machine is down 2016-05-11 10:30:04 High Availability (standby) Status updated: checkpoint-ha-state haStatCode.0 High Availability (standby) 2016-05-11 10:28:03 High Availability (standby) Status Ok: cpnew02 High Availability (down) entered OK state: OK (previous: CRITICAL) Does anyone have any advice on how to build the alert checker for this? The high Availability icon looks to be a traffic lights one while the devices themselves show as the normal device icon - so I think they may be discovered as separate entities. I am also a bit unsure on how to filter to the OS "Check Point GAiA R77.45 (standby)" so for now have just been using device type firewall. Many thanks, Robin -------------------------------------------------------------------------------------------------------------------------------------------------- This message is for the designated recipient(s) only and may contain privileged, proprietary, and/or confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the email by you is prohibited. Any views or opinions expressed are solely those of the author and do not necessarily represent those of MDSL. -------------------------------------------------------------------------------------------------------------------------------------------------- Registered Information MARKET DATA SERVICES LIMITED, FLOOR 2 BUILDING 4, CENTURY PLACE, LAMBERTS ROAD, TUNBRIDGE WELLS, KENT, TN2 3EH, UNITED KINGDOM Company No: 03031342 | VAT Reg. No.: GB624962327

2 1

(no subject)
by Andy Lemin 13 May '16

13 May '16

Haha, Yea I'm not brave enough to cut myself on bleeding edge ;) Just "Stable" here as its prod.. Thanks for being so quick! On Fri, May 13, 2016 at 2:46 PM, Adam Armstrong <adama(a)memetic.org> wrote: > That was done 10 minutes ago... > > Unless you're all confused and running stable! :DDD > > adam. > > On 13/05/2016 14:43:03, Andy Lemin <andy(a)brandwatch.com> wrote: > Haha, damn hipster hidden pages.. Haha ;) > > Thanks Adam, I have added "$config['web_enable_showtech'] = 1;" to my > config.php > > I will await the code update :) > > Thanks, Andy. > > On Fri, May 13, 2016 at 2:31 PM, Adam Armstrong <adama(a)memetic.org> wrote: > >> I've added this to the device "cog" menu, when enabled in the config >> (web_enable_showtech = true in config.php, or Web UI -> General -> Enable >> 'show tech' option in web-config editor) >> >> adam. >> >> On 13/05/2016 14:17:23, Adam Armstrong <adama(a)memetic.org> wrote: >> Shh. You're not supposed to know that tab exists! :P >> >> adam. >> >> On 13/05/2016 14:15:17, Andy Lemin <andy(a)brandwatch.com> wrote: >> Hi, >> >> Does anyone know how to unhide the "showtech" tab for all the devices? >> >> For example, go to somewhere like; >> https://observium/device/device=17/tab=ports/ >> >> And change the "ports" for "showtech". >> >> http://observium/device/device=<device_id>/tab=showtech/ >> >> This page is useful, and would be nice to have the button on >> the device page instead of having to remember a URL hack, when debugging >> missing data or problems monitoring devices etc (esp when using rancid and >> smokeping like we do). >> >> Hoping their is a secret config.php switch :) >> >> Thanks, Andy. >> _______________________________________________ observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> > _______________________________________________ observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >

1 0

Unhide the hidden showtech tab
by Andy Lemin 13 May '16

13 May '16

Hi, Does anyone know how to unhide the "showtech" tab for all the devices? For example, go to somewhere like; https://observium/device/device=17/tab=ports/ And change the "ports" for "showtech". http://observium/device/device=<device_id>/tab=showtech/ This page is useful, and would be nice to have the button on the device page instead of having to remember a URL hack, when debugging missing data or problems monitoring devices etc (esp when using rancid and smokeping like we do). Hoping their is a secret config.php switch :) Thanks, Andy.

2 4

Re: [Observium] Citrix Netscaler vServer
by Moerman, Maarten 13 May '16

13 May '16

Hi, See a LB vserver pool, and the vserver stats below: Vserver lists all services, and aggregated stats of the pool itself Service has: bits, packets, connections, requests, ttfb & surgecount There’s also more tcp stuff & ssl stuff in other tabs Maarten [cid:389CB59F-C0E4-4CE5-9B5B-3F1307456575][cid:F9A6342F-F0EE-4362-A4FE-4CF6889949F4] From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Adam Armstrong <adama(a)memetic.org<mailto:adama@memetic.org>> Reply-To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Date: Friday, May 13, 2016 at 1:39 PM To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Subject: Re: [Observium] Citrix Netscaler vServer Hi, We don't really have a trial beyond CE (which effectively is the trial), but if you guys have Netscalers, the 150 quid is certainly super cheap for the amount of data we collect from them. Our Netscaler support is developed in conjunction with eBay to monitor their load balancer platform, so it's one of the more actively developed parts of our code. If you ask nicely, perhaps someone will be able to generate some screenshots or something :D Adam. Sent from BlueMail<http://www.bluemail.me/r> On May 13, 2016, at 11:57, Richard Wigzell <richard.wigzell(a)it.ox.ac.uk<mailto:richard.wigzell@it.ox.ac.uk>> wrote: Thank you all for the replies. Is it possible to trial the subscription edition? We would be interested to see this functionality as well as the custom OID monitor. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/> From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 09 May 2016 14:19 To: Observium Network Observation System Subject: Re: [Observium] Citrix Netscaler vServer CE does not support netscaler, you need a subscription for that. Adam. Sent from BlueMail<http://www.bluemail.me/r> On May 9, 2016, at 15:14, prost pierrick <pierrick.prost(a)cnrs.fr<mailto:pierrick.prost@cnrs.fr>> wrote: Hello, Have you tried a SNMP WALK on your equipment ? De : observium [mailto:observium-bounces@observium.org] De la part de Richard Wigzell Envoyé : lundi 9 mai 2016 14:51 À : 'observium(a)observium.org<mailto:'observium(a)observium.org>' Objet : [Observium] Citrix Netscaler vServer Hello, we have a Citrix Netscaler (x2 HA) that we monitor but there is no Loadbalancer Tab on the device page. So we are unable to see vServers info etc. Have ensured that the SNMP view is FULL as opposed to Read only on the device themselves. Both nodes are running Citrix Netscaler NS10.5 (Build 57.7.nc) Running CE 0.16.1.7533 (26th January 2016). Am I correct in thinking that I should be able to see vServer info? If so some suggestions to resolve this would be welcome. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/> ________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Citrix Netscaler vServer
by Richard Wigzell 13 May '16

13 May '16

Hello, we have a Citrix Netscaler (x2 HA) that we monitor but there is no Loadbalancer Tab on the device page. So we are unable to see vServers info etc. Have ensured that the SNMP view is FULL as opposed to Read only on the device themselves. Both nodes are running Citrix Netscaler NS10.5 (Build 57.7.nc) Running CE 0.16.1.7533 (26th January 2016). Am I correct in thinking that I should be able to see vServer info? If so some suggestions to resolve this would be welcome. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

3 4

Re: [Observium] Disk size alert Windows
by Epco Dijk 12 May '16

12 May '16

Hi, Thanks for all your answers. However I didn’t get it to work. [cid:image001.png@01D1AC9A.71C211A0] [cid:image002.png@01D1AC9A.71C211A0] It doesn’t seem to pick it up. Otherwise I would expect it to be in the Matching Entities. When I replace the entity match to * it does get pickup in the alert, but then the alert is useless for me: [cid:image003.png@01D1AC9A.71C211A0] But from the earlier sent attachment you see that Storage_type hrStorageFixedDisk is being returned. If someone can shine a light, much appreciated. KR, Epco From: observium <observium-bounces(a)observium.org> on behalf of Adam Armstrong <adama(a)memetic.org> Reply-To: Observium Network Observation System <observium(a)observium.org> Date: Thursday 12 May 2016 at 20:31 To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Disk size alert Windows Well, I did write it :D Match does a str_match() style comparison. Easier, faster and sufficient in most instances. Adam. Sent from BlueMail<http://www.bluemail.me/r> On 12 May 2016, at 19:07, "Pål Rydningen" <paal.rydningen(a)gmail.com<mailto:paal.rydningen@gmail.com>> wrote: That changes everything Adam! I was not aware that "regex" could be a test-keyword... You got access to the source-code or something? ;) Seriously tho - this did spur me into looking twice at things and a plain "storage_descr match C*" did the trick. On Thu, May 12, 2016 at 7:50 PM, Adam Armstrong <adama(a)memetic.org<mailto:adama@memetic.org>> wrote: You can use regular expressions. storage_descr regex /^c/ or something? :D adam. On 12/05/2016 18:41:57, Pål Rydningen <paal.rydningen(a)gmail.com<mailto:paal.rydningen@gmail.com>> wrote: CE scrub here; Yes it does - and this checker is a partial success to me: Error! Filename not specified. The only thing I still haven't figured out is how to match particular drive-letters. When its listed as "C:\ Label: Serial Number 58edd0c8" - Im fumbling trying to find a way to match the beginning of the string and look for "C:" I presume there is some magic involved with the "match" keyword and how to use it with a regex? _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Pål R. ________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium Epco Dijk Systems Administrator Northpool bv Kanaalpark 140 2321JV Leiden The Netherlands Tel: +31 (0)88 2400300 Fax: +31 (0)88 2400399 E-mail: epco.dijk(a)northpool.nl Web: www.northpool.nl [http://www.northpool.nl/wp-content/uploads/2015/09/signature.png] This message and any attachments (the "message") are confidential and intended solely for the addressees. If you are not the addressee indicated in this message or if this message has been addressed to you by error, you may not copy or deliver this message to anyone but destroy it and kindly notify the sender by reply email. Any unauthorised use or dissemination is prohibited. E-mails are susceptible to alteration. Northpool bv shall not be liable for the message if altered, changed or falsified.

3 4

Re: [Observium] Customer billing search
by Jan Kuiper 12 May '16

12 May '16

Hi Adam, I found the issue after looking up the source code: mysql> SELECT * FROM `entity_permissions` WHERE `entity_type` = 'bill' GROUP BY `user_id` ORDER BY `user_id` ; +---------+---------+-------------+-----------+--------------+ | perm_id | user_id | entity_type | entity_id | access_level | +---------+---------+-------------+-----------+--------------+ | 1 | 2 | bill | 0 | 0 | …… Strange enough the first record pointed to user_id 2 and this user isn’t in de user table. After changing user_id 2 to 1 (admin account) everything is working again. I don’t know what caused this. Thanks, Jan Kuiper Date: Thu, 12 May 2016 15:16:50 +0100 From: "Adam Armstrong" <adama(a)memetic.org<mailto:adama@memetic.org>> To: "" <observium(a)observium.org<mailto:observium@observium.org>> Subject: Re: [Observium] Customer billing search Message-ID: <31e01c31-15c4-4750-aa3c-64677cb4ddff(a)getmailbird.com<mailto:31e01c31-15c4-4750-aa3c-64677cb4ddff@getmailbird.com>> Content-Type: text/plain; charset="utf-8" I mean, your problem is that you have a blank user. You probably want to remove this from the user management area. adam. On 12/05/2016 15:08:01, Jan Kuiper <j.kuiper(a)piramide.nl<mailto:j.kuiper@piramide.nl>> wrote: Hi Adam, Thanks for the assist :-(. I really can't find the place to delete the blank user in the traffic accounting search, nor can't find the place to alter this. It seems to me that this is an issue in the stable version (build 0.16.5.7833), because the 'All Types' filter is working correctly, but the User dropbox is empty and selects an non existing blank user (deselecting the blank user solves the problem). Best regards, Jan Kuiper Date: Thu, 12 May 2016 14:44:46 +0100 From: "Adam Armstrong" To: "" Subject: Re: [Observium] FW: observium Digest, Vol 70, Issue 63 Message-ID: Content-Type: text/plain; charset="utf-8" I've no idea why you have a blank user, that's your problem! adam. On 12/05/2016 14:41:55, Jan Kuiper wrote: Hi Adam, I didn't select anything. Also I found out if I manually deselect the given blank user the search is working again. How can we save the query without the automatic selected blank user? Best regards, Jan Kuiper Date: Thu, 12 May 2016 12:11:28 +0100 From: "Adam Armstrong" To: "" Subject: Re: [Observium] Customer billing search Message-ID: Content-Type: text/plain; charset="utf-8" You have a blank named user selected? adam. On 12/05/2016 12:08:44, Jan Kuiper wrote: Hi Adam, Is there a way to debug it? If I enter a word in the Billing Name nothing is found but I am sure that there are records matching the search string. Also the User dropdown box contains an empty record, could this be the problem because the ‘All Types’ first match is "All Types". See attached snippets. Best regards, Jan Kuiper Date: Thu, 12 May 2016 11:29:06 +0100 From: "Adam Armstrong" To: "" Subject: Re: [Observium] Customer billing search Message-ID: Content-Type: text/plain; charset="utf-8" This seems to work fine for me. adam. On 12/05/2016 09:33:45, Jan Kuiper wrote: Hi, I want to search for a bill, but the bill search function seems to be broken again, even when we clear the search settings no records are found. A refresh (F5) of the page show all records again. Is it possible to fix this? We are running version 0.16.5.7833. Best regards, Jan Kuiper From: Jan Kuiper Sent: maandag 10 augustus 2015 17:11 To: observium(a)observium.org<mailto:observium@observium.org> [mailto:observium@observium.org] Subject: Customer billing Hi, I want to search for bills, but the bill search function does only give all bills instead of the requested Bill Name. Has anyone the same issue, if no what can I do wrong or fix it? I am running the stable version 6833. Met vriendelijke groet / Kind Regards, Jan Kuiper [cid:image001.jpg@01CF62F0.6DBAB760 [cid:image001.jpg@01CF62F0.6DBAB760<cid:image001.jpg@01CF62F0.6DBAB760%20[cid:image001.jpg@01CF62F0.6DBAB760>]] Piramide ICT Services | Kollergang 9 | 7773 NG Hardenberg | Postbus 220 | 7770 AE Hardenberg info(a)piramide.nl<mailto:info@piramide.nl> [mailto:info@piramide.nl] [mailto:info@piramide.nl [mailto:info@piramide.nl<mailto:info@piramide.nl%20[mailto:info@piramide.nl>]] | http://www.piramide.nl [http://www.piramide.nl] [http://www.piramide.nl] | +31 (0)523 261 387 Disclaimer Deze e-mail is uitsluitend bestemd voor de geadresseerde(n). Verstrekking aan en gebruik door anderen is niet toegestaan. Piramide sluit iedere aansprakelijkheid uit die voortvloeit uit elektronische verzending. _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20160512/aac259f…>

1 0

Disk size alert Windows
by Epco Dijk 12 May '16

12 May '16

Hi all, I really struggle to get a proper alert on a Windows C: drive size. Checker is as follows (can also be found in attachment): Storage_perc greater 50 Hostname match ampere* Entity * Only if I fill it in as above at least the checker is added. As soon as I change entity to storage_type equals hrStorageFixedDisk like written in manuals it doesn't even add the check after the rebuild option. I have run ./poller.php -h ampere.companyname.pvt -dd with attached result. As you can see the C:\ drive is filled more than 50% so I would expect an alert. Who can help me with this? Thanks in advance. Kind regards, Epco Dijk Epco Dijk Systems Administrator Northpool bv Kanaalpark 140 2321JV Leiden The Netherlands Tel: +31 (0)88 2400300 Fax: +31 (0)88 2400399 E-mail: epco.dijk(a)northpool.nl Web: www.northpool.nl [http://www.northpool.nl/wp-content/uploads/2015/09/signature.png] This message and any attachments (the "message") are confidential and intended solely for the addressees. If you are not the addressee indicated in this message or if this message has been addressed to you by error, you may not copy or deliver this message to anyone but destroy it and kindly notify the sender by reply email. Any unauthorised use or dissemination is prohibited. E-mails are susceptible to alteration. Northpool bv shall not be liable for the message if altered, changed or falsified.

3 5

Observium and Slack
by Andy Lemin 12 May '16

12 May '16

Hi guys, Has anyone gotten Slack Alert notifications working? We have email alerts working but not Slack. NB; Running the commercial version (0.16.2.7629). We have a webhook URL for a private slack channel https://hooks.slack.com/services/xxxxxxxxx/yyyyyyyy/zzzzzzzzzzzzzzzzzzzzzzzz (x, y and z replaced for public viewing) I tried the custom webhook "Contact", however we don't know how to transpose our slack webhook into the fields provided (URL, Authentication token, Sender of message). There is no Authentication, and their is no Sender (the sender is defined by the webhook on the Slack side). But only filling in the URL field with the webhook doesn't work :( Doing a "curl" test on the Observium server terminal with the webhook works fine? Have also tried creating the new slack "Contact", But I have no idea how I'm supposed to transpose this webhook into the fields provided; (Channel name, Username, Instance URL). Assume this only works for public channels where you enter in user details for Observium instead of using a webhook. Generally not sure how to debug this. Noobie.. Thanks, Andy.

3 17

Suggested addition to geist-mib-v3.inc.php
by Ron Culler 12 May '16

12 May '16

We have these units with the additional Temp Sensors. With the addition of the code below we are now able to see all of them // GEIST-MIB-V3::tempSensorSerial.1 = STRING: 200000034EB41F28 // GEIST-MIB-V3::tempSensorName.1 = STRING: Temp Sensor // GEIST-MIB-V3::tempSensorAvail.1 = Gauge32: 1 // GEIST-MIB-V3::tempSensorTempC.1 = INTEGER: 22 Degrees Celsius $cache['geist']['tempSensorTable'] = snmpwalk_cache_multi_oid($device, "tempSensorTable", array(), "GEIST-MIB-V3", mib_dirs('geist')); foreach ($cache['geist']['tempSensorTable'] as $index => $entry) { if ($entry['tempSensorAvail']) { $descr = $entry['tempSensorName'] . " Temperature"; $oid = ".1.3.6.1.4.1.21239.2.4.1.5.$index"; $prefix = 'tempSensorTempC'; $value = $entry[$prefix]; $limits = (is_array($geist_alarms[$prefix.'.'.$index]) ? $geist_alarms[$prefix.'.'.$index] : array()); if (is_numeric($value)) { discover_sensor($valid['sensor'], 'temperature', $device, $oid, $prefix.'.'.$index, 'geist-mib-v3', $descr, 1, $value, $limits); } } } Ron Culler

1 0

Re: [Observium] Customer billing search
by Jan Kuiper 12 May '16

12 May '16

Hi Adam, Thanks for the assist :-(. I really can't find the place to delete the blank user in the traffic accounting search, nor can't find the place to alter this. It seems to me that this is an issue in the stable version (build 0.16.5.7833), because the 'All Types' filter is working correctly, but the User dropbox is empty and selects an non existing blank user (deselecting the blank user solves the problem). Best regards, Jan Kuiper Date: Thu, 12 May 2016 14:44:46 +0100 From: "Adam Armstrong" <adama(a)memetic.org> To: "" <observium(a)observium.org> Subject: Re: [Observium] FW: observium Digest, Vol 70, Issue 63 Message-ID: <46ad7bce-500b-41e5-9ec5-53efbd93e5ed(a)getmailbird.com> Content-Type: text/plain; charset="utf-8" I've no idea why you have a blank user, that's your problem! adam. On 12/05/2016 14:41:55, Jan Kuiper <j.kuiper(a)piramide.nl> wrote: Hi Adam, I didn't select anything. Also I found out if I manually deselect the given blank user the search is working again. How can we save the query without the automatic selected blank user? Best regards, Jan Kuiper Date: Thu, 12 May 2016 12:11:28 +0100 From: "Adam Armstrong" To: "" Subject: Re: [Observium] Customer billing search Message-ID: Content-Type: text/plain; charset="utf-8" You have a blank named user selected? adam. On 12/05/2016 12:08:44, Jan Kuiper wrote: Hi Adam, Is there a way to debug it? If I enter a word in the Billing Name nothing is found but I am sure that there are records matching the search string. Also the User dropdown box contains an empty record, could this be the problem because the ‘All Types’ first match is "All Types". See attached snippets. Best regards, Jan Kuiper Date: Thu, 12 May 2016 11:29:06 +0100 From: "Adam Armstrong" To: "" Subject: Re: [Observium] Customer billing search Message-ID: Content-Type: text/plain; charset="utf-8" This seems to work fine for me. adam. On 12/05/2016 09:33:45, Jan Kuiper wrote: Hi, I want to search for a bill, but the bill search function seems to be broken again, even when we clear the search settings no records are found. A refresh (F5) of the page show all records again. Is it possible to fix this? We are running version 0.16.5.7833. Best regards, Jan Kuiper From: Jan Kuiper Sent: maandag 10 augustus 2015 17:11 To: observium(a)observium.org [mailto:observium@observium.org] Subject: Customer billing Hi, I want to search for bills, but the bill search function does only give all bills instead of the requested Bill Name. Has anyone the same issue, if no what can I do wrong or fix it? I am running the stable version 6833. Met vriendelijke groet / Kind Regards, Jan Kuiper [cid:image001.jpg@01CF62F0.6DBAB760 [cid:image001.jpg@01CF62F0.6DBAB760]] Piramide ICT Services | Kollergang 9 | 7773 NG Hardenberg | Postbus 220 | 7770 AE Hardenberg info(a)piramide.nl [mailto:info@piramide.nl] [mailto:info@piramide.nl [mailto:info@piramide.nl]] | http://www.piramide.nl [http://www.piramide.nl] [http://www.piramide.nl] | +31 (0)523 261 387 Disclaimer Deze e-mail is uitsluitend bestemd voor de geadresseerde(n). Verstrekking aan en gebruik door anderen is niet toegestaan. Piramide sluit iedere aansprakelijkheid uit die voortvloeit uit elektronische verzending.

2 1

FW: observium Digest, Vol 70, Issue 63
by Jan Kuiper 12 May '16

12 May '16

Hi Adam, I didn't select anything. Also I found out if I manually deselect the given blank user the search is working again. How can we save the query without the automatic selected blank user? Best regards, Jan Kuiper Date: Thu, 12 May 2016 12:11:28 +0100 From: "Adam Armstrong" <adama(a)memetic.org> To: "" <observium(a)observium.org> Subject: Re: [Observium] Customer billing search Message-ID: <2f35ded3-56e9-4c9a-8c29-71a8b2110f45(a)getmailbird.com> Content-Type: text/plain; charset="utf-8" You have a blank named user selected? adam. On 12/05/2016 12:08:44, Jan Kuiper <j.kuiper(a)piramide.nl> wrote: Hi Adam, Is there a way to debug it? If I enter a word in the Billing Name nothing is found but I am sure that there are records matching the search string. Also the User dropdown box contains an empty record, could this be the problem because the ‘All Types’ first match is "All Types". See attached snippets. Best regards, Jan Kuiper Date: Thu, 12 May 2016 11:29:06 +0100 From: "Adam Armstrong" <adama(a)memetic.org [mailto:adama@memetic.org]> To: "" <observium(a)observium.org [mailto:observium@observium.org]> Subject: Re: [Observium] Customer billing search Message-ID: <dfdfe0ac-7975-4487-8726-c10b0111b71e(a)getmailbird.com [mailto:dfdfe0ac-7975-4487-8726-c10b0111b71e@getmailbird.com]> Content-Type: text/plain; charset="utf-8" This seems to work fine for me. adam. On 12/05/2016 09:33:45, Jan Kuiper <j.kuiper(a)piramide.nl [mailto:j.kuiper@piramide.nl]> wrote: Hi, I want to search for a bill, but the bill search function seems to be broken again, even when we clear the search settings no records are found. A refresh (F5) of the page show all records again. Is it possible to fix this? We are running version 0.16.5.7833. Best regards, Jan Kuiper From: Jan Kuiper Sent: maandag 10 augustus 2015 17:11 To: observium(a)observium.org [mailto:observium@observium.org] Subject: Customer billing Hi, I want to search for bills, but the bill search function does only give all bills instead of the requested Bill Name. Has anyone the same issue, if no what can I do wrong or fix it? I am running the stable version 6833. Met vriendelijke groet / Kind Regards, Jan Kuiper [cid:image001.jpg@01CF62F0.6DBAB760 [cid:image001.jpg@01CF62F0.6DBAB760]] Piramide ICT Services | Kollergang 9 | 7773 NG Hardenberg | Postbus 220 | 7770 AE Hardenberg info(a)piramide.nl [mailto:info@piramide.nl] [mailto:info@piramide.nl [mailto:info@piramide.nl]] | http://www.piramide.nl [http://www.piramide.nl] [http://www.piramide.nl] | +31 (0)523 261 387 Disclaimer Deze e-mail is uitsluitend bestemd voor de geadresseerde(n). Verstrekking aan en gebruik door anderen is niet toegestaan. Piramide sluit iedere aansprakelijkheid uit die voortvloeit uit elektronische verzending. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20160512/c514019…> ------------------------------ Message: 3 Date: Thu, 12 May 2016 12:41:13 +0100 From: Andy Lemin <andy(a)brandwatch.com> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Observium and Slack Message-ID: <CAP1PKXv-0f=ohrEHcY53mRZ3=Fkx1stSJZFLi=6cLfEO4ieSnA(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Hi Adam, Thank you very much for your quick reply. However it is still not working :( I created an "Incoming Webhook" on the Slack site for our company, which injects messages to the "Private" channel "networks-private", with the username Network-Alerts. If I test the webhook with 'Curl' (as image below) it works fine and the test message appears in Slack (and on my mobile ;) But as you can see in my test below, I setup the contact the same as you, added an Alert checker, and then triggered some alerts. But none of them came through? Observium; Command line test; Slack App; Really want to get this working with Observium as a method of notifying network alerts to my mobile. NB; This is an unmodified install of the paid version 0.16.5.7833 Thanks very much for your time and thoughts. Cheers, Andy. On Thu, May 12, 2016 at 12:11 PM, Adam Armstrong <adama(a)memetic.org> wrote: > Hi Andy, > > Getting slack to work is pretty straightforward, you just need a hook > url and a channel name: > > > http://omega.memetic.org/~adama/monosnap/Observium_Dev____-_Contact_-_ > Google_Chrome_2016-05-12_12.09.37.png > > Old screenshots died a week or two ago when the server they were on > had a harddisk implosion! :) > > adam. > > On 12/05/2016 12:01:11, Andy Lemin <andy(a)brandwatch.com> wrote: > PS; Is there an up-to-date guide/manual for Observium and Slack? I > must be missing something silly.. > > The only one I can find is; > https://rickheil.com/slack-and-observium-sitting-in-a-tree/ > > However this is out of date and suggest modifying files, when the > Integration is now finished I believe. > > Thanks, Andy. > > On Thu, May 12, 2016 at 11:55 AM, Andy Lemin <andy(a)brandwatch.com> wrote: > >> Hi, >> >> Sorry for the slow reply. >> >> When I tried to look at your picture Adam, it says failed to connect? >> Do you know if this is permanent or only temporary? Still need to get >> Slack working (have been away on holiday :) >> >> Thanks, Andy. >> >> >> On Thu, Mar 10, 2016 at 7:56 AM, Henrik Cednert (Filmlance) < >> henrik.cednert(a)filmlance.se> wrote: >> >>> Yepp. I've got it working. Confed at slack site and then like what >>> adam showed you. >>> >>> Have some fishy alerts but that's deeper than the slack notif and >>> something with the polling of that device. But screenshot shows how >>> the slack output looks/can look. >>> >>> Cheers >>> >>> -- >>> Henrik Cednert >>> cto | td | compositor >>> >>> *Filmlance International* >>> mobile [ + 46 (0)704 71 89 54 ] >>> skype [ cednert ] >>> >>> From: observium <observium-bounces(a)observium.org> on behalf of Adam >>> Armstrong <adama(a)memetic.org> >>> Reply-To: Observium Network Observation System >>> <observium(a)observium.org> >>> Date: Wednesday 9 March 2016 at 17:51 >>> To: "observium(a)observium.org" <observium(a)observium.org> >>> Subject: Re: [Observium] Observium and Slack >>> >>> >>> http://alpha.memetic.org/~adama/snaps/Observium_Dev____Contact_-_Goo >>> gle_Chrome_2016-03-09_16.48.38.png >>> >>> adam. >>> >>> Sent from Mailbird >>> <http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&ut >>> m_campaign=sent-from-mailbird> >>> >>> On 09/03/2016 15:33:43, Andy Lemin <andy(a)brandwatch.com> wrote: >>> Hi guys, >>> >>> Has anyone gotten Slack Alert notifications working? We have email >>> alerts working but not Slack. NB; Running the commercial version >>> (0.16.2.7629). >>> >>> We have a webhook URL for a private slack channel >>> >>> https://hooks.slack.com/services/xxxxxxxxx/yyyyyyyy/zzzzzzzzzzzzzzzz >>> zzzzzzzz (x, y and z replaced for public viewing) >>> >>> >>> I tried the custom webhook "Contact", however we don't know how to >>> transpose our slack webhook into the fields provided (URL, >>> Authentication token, Sender of message). >>> >>> There is no Authentication, and their is no Sender (the sender is >>> defined by the webhook on the Slack side). >>> >>> But only filling in the URL field with the webhook doesn't work :( >>> Doing a "curl" test on the Observium server terminal with the >>> webhook works fine? >>> >>> >>> Have also tried creating the new slack "Contact", But I have no idea >>> how I'm supposed to transpose this webhook into the fields provided; >>> (Channel name, Username, Instance URL). >>> Assume this only works for public channels where you enter in user >>> details for Observium instead of using a webhook. >>> >>> Generally not sure how to debug this. Noobie.. >>> >>> Thanks, Andy. >>> _______________________________________________ observium mailing >>> list observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> >> > _______________________________________________ observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20160512/5f24178…> -------------- next part -------------- A non-text attachment was scrubbed... Name: ObserviumSlack1.png Type: image/png Size: 190938 bytes Desc: not available URL: <http://postman.memetic.org/pipermail/observium/attachments/20160512/5f24178…> -------------- next part -------------- A non-text attachment was scrubbed... Name: ObserviumSlack2.png Type: image/png Size: 11532 bytes Desc: not available URL: <http://postman.memetic.org/pipermail/observium/attachments/20160512/5f24178…> -------------- next part -------------- A non-text attachment was scrubbed... Name: Screen Shot 2016-05-12 at 12.32.21.png Type: image/png Size: 33255 bytes Desc: not available URL: <http://postman.memetic.org/pipermail/observium/attachments/20160512/5f24178…> ------------------------------ Subject: Digest Footer _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ------------------------------ End of observium Digest, Vol 70, Issue 63 *****************************************

2 1

Customer billing search
by Jan Kuiper 12 May '16

12 May '16

Hi Adam, Is there a way to debug it? If I enter a word in the Billing Name nothing is found but I am sure that there are records matching the search string. Also the User dropdown box contains an empty record, could this be the problem because the ‘All Types’ first match is "All Types". See attached snippets. [cid:image001.jpg@01D1AC4F.63065BD0] [cid:image002.jpg@01D1AC4F.63065BD0] Best regards, Jan Kuiper Date: Thu, 12 May 2016 11:29:06 +0100 From: "Adam Armstrong" <adama(a)memetic.org<mailto:adama@memetic.org>> To: "" <observium(a)observium.org<mailto:observium@observium.org>> Subject: Re: [Observium] Customer billing search Message-ID: <dfdfe0ac-7975-4487-8726-c10b0111b71e(a)getmailbird.com<mailto:dfdfe0ac-7975-4487-8726-c10b0111b71e@getmailbird.com>> Content-Type: text/plain; charset="utf-8" This seems to work fine for me. adam. On 12/05/2016 09:33:45, Jan Kuiper <j.kuiper(a)piramide.nl<mailto:j.kuiper@piramide.nl>> wrote: Hi, I want to search for a bill, but the bill search function seems to be broken again, even when we clear the search settings no records are found. A refresh (F5) of the page show all records again. Is it possible to fix this? We are running version 0.16.5.7833. Best regards, Jan Kuiper From: Jan Kuiper Sent: maandag 10 augustus 2015 17:11 To: observium(a)observium.org<mailto:observium@observium.org> Subject: Customer billing Hi, I want to search for bills, but the bill search function does only give all bills instead of the requested Bill Name. Has anyone the same issue, if no what can I do wrong or fix it? I am running the stable version 6833. Met vriendelijke groet / Kind Regards, Jan Kuiper [cid:image001.jpg@01CF62F0.6DBAB760] Piramide ICT Services | Kollergang 9 | 7773 NG Hardenberg | Postbus 220 | 7770 AE Hardenberg info(a)piramide.nl<mailto:info@piramide.nl> [mailto:info@piramide.nl] | http://www.piramide.nl [http://www.piramide.nl] | +31 (0)523 261 387 Disclaimer Deze e-mail is uitsluitend bestemd voor de geadresseerde(n). Verstrekking aan en gebruik door anderen is niet toegestaan. Piramide sluit iedere aansprakelijkheid uit die voortvloeit uit elektronische verzending.

2 1