- observium - lists.observium.org

Download RAW data for 95th billing
by ChanTy 19 Mar '16

19 Mar '16

Hi, Is it possible to download raw data for 95th billing purpose ? To my understand, we can only do fixed billing period like 30 or 31 but some month is 30, 31, 29 or 28 billing period. If downloading as raw data, it is much flexible to compare with customer or vender. Regards, chanty

2 2

Re: [Observium] Extra Pages - Can they be added?
by Gumilar Siegfried 18 Mar '16

18 Mar '16

Hi Tom, we would like to have this feature as well. It is the only thing that prevents me from shutting down our Cacti Setup. ☺ Regards, Siegfried Von: observium [mailto:observium-bounces@observium.org] Im Auftrag von Tom Laermans Gesendet: Donnerstag, 17. März 2016 17:55 An: Observium Network Observation System Betreff: Re: [Observium] Extra Pages - Can they be added? Hi Lee, Currently not possible without copying and modifying some code, we'd like to support multiple customizable front pages at some point though.. Tom On 03/17/2016 02:38 PM, Lee Byatt wrote: Hi, Is it possible to create a new page so I can have extra interface summaries on it? For example my front page is set-up like this; // Front Page $config['frontpage']['order'] = array('status_summary','device_status','map','custom_traffic','overall_traffic','alert_table','eventlog'); $config['frontpage']['custom_traffic']['ids'] = "3577,3044,2964,3559"; $config['frontpage']['custom_traffic']['title'] = "xxxx Aggregated Transit & iXP Traffic"; How to I use another page with another custom traffic, is this possible? Many regards _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 3

Extra Pages - Can they be added?
by Lee Byatt 17 Mar '16

17 Mar '16

Hi, Is it possible to create a new page so I can have extra interface summaries on it? For example my front page is set-up like this; // Front Page $config['frontpage']['order'] = array('status_summary','device_status','map','custom_traffic','overall_traffic','alert_table','eventlog'); $config['frontpage']['custom_traffic']['ids'] = "3577,3044,2964,3559"; $config['frontpage']['custom_traffic']['title'] = "xxxx Aggregated Transit & iXP Traffic"; How to I use another page with another custom traffic, is this possible? Many regards

2 1

SMS alert recommendation
by Alex Winder ＠ M5i 17 Mar '16

17 Mar '16

Hi all, We're looking to set-up SMS alerts on our Observium install, what do people recommend is a good system to use for this? Kind regards, Alex.

5 6

Alcatel OmniStack 6224 --> Aruba device - ArubaOS
by Ivan Biasi 17 Mar '16

17 Mar '16

Hi Adam and all I'm trying Observium in a test environment, using some different network devices, and I found the following issue. The Alcatel OmniStack 6224 switch is reported by Observium as an Aruba device running ArubaOS. Selecting it on the GUI, the following banner appears: "Device not yet discovered This device has not yet been successfully discovered. System information and statistics will not be populated and graphs will not draw. This device should be automatically discovered within 10 minutes." ...but devices was added some days ago. Here enclosed a picture to better understand the problem. Is the Alcatel 6224 switch unsupported/partially supported, or there are some configuration issues to identify and solve? Thanks a lot, regards Ivan. -- ing. Biasi Ivan Area Ingegneria di Rete Direzione Servizi e Reti TRENTINO NETWORK S.R.L. Via G.Pedrotti, 18 – 38121 - TRENTO Tel : (+39) 0461.020222 Fax : (+39) 0461.020201 Email: ivan.biasi(a)trentinonetwork.it ________________________________________________________________________________ Società soggetta a direzione e controllo da parte della Provincia Autonoma di Trento. REG. IMP. C.F. e P. IVA 01904880224 ________________________________________________________________________________ CONFIDENZIALE: Questo messaggio e gli eventuali allegati sono confidenziali e riservati. Se vi è stato recapitato per errore e non siete fra i destinatari elencati, siete pregati di darne immediatamente avviso al mittente. Le informazioni contenute non devono essere mostrate ad altri, nè utilizzate, memorizzate o copiate in qualsiasi forma. CONFIDENTIAL: This e-mail and any attachments to it may be confidential and may contain private and confidential information. If you are not the intended recipient of this email please notify the sender immediately. Moreover, you must not disclose or distribute its contents to anyone nor copy, store or use its contents in any way.

3 7

New Admin User creation
by Sathish.I 17 Mar '16

17 Mar '16

Hello All, I lost my admin user password, and I have created new user as below with level10. But when I logged into GUI with observium user id and password I am not able to login. Error is Wrong username and password. Can you please help me. ~# ~# ~# cd /opt/observium/ /opt/observium# ./adduser.php observium Password@123 10 Observium 0.16.1.7535 Add User User observium added successfully. /opt/observium# Regards, Sath

3 7

Alerts x contacts
by Eduardo Schoedler 17 Mar '16

17 Mar '16

Hi, I registered a few contacts in Observium Alerts, but it's not using them. Can I specify a different contact for different alerts? Thank you. Regards, -- Eduardo Schoedler

2 2

Not able to add juniper router
by Ankit Dubey 16 Mar '16

16 Mar '16

Hi, Not able to add juniper routers( Juniper MX104 & Juniper ACX1100) to my License version observium . When we are trying to run SNMP walk from OBSERVIUM, Juniper is not giving full result. Best regards Ankit Dubey ________________________________ This E-Mail may contain Confidential and/or legally privileged Information and is meant for the intended recipient(s) only. If you have received this e-mail in error and are not the intended recipient/s, Kindly notify the sender and then delete this e-mail immediately from your system. You are also hereby notified that any use, any form of reproduction, dissemination, copying, disclosure, modification, distribution and/or publication of this e-mail, its contents or its attachment/s other than by its intended recipient/s is strictly prohibited and may be unlawful. Internet Communications cannot be guaranteed to be secure or error-free as information could be delayed, intercepted, corrupted, lost, or contain viruses. Sistema Shyam Teleservices Limited does not accept any liability for any errors, omissions, viruses or computer problems experienced by any recipient as a result of this e-mail.

3 4

Recommendation to support 20K devices on observium
by Ruiz, Carlos 16 Mar '16

16 Mar '16

Good morning everyone, We're evaluating to use observium as hardware monitoring devices based on snmp protocol for devices located all around the world. We're talking about 20K devices and I believe that have one single host locate in SSF, getting all the info from all the devices, located on places like Shangai may not be the best scenario to get the best performance from the tool itself Does observium support the concept of Master of masters?, I mean have local master observium hosts (EMEA, APAC, NA) and consolidate all the info in one single Master Observium Instance If not what will be a recommended approach to cover an scenario like the one described Thanks in advance for your help and collaboration Kind Regards -- Carlos Ruiz Compute System Management Senior Engineer Roche Farma, S.A.Josefa Valcarcel, 40. ES-28027 Madrid (Spain) Phone: +34 91 305 99 25 Mobile: +34 662 10 46 14 * *

4 9

Netapp missing network data
by Louis Bailleul 16 Mar '16

16 Mar '16

Hi, I have a Netapp in cluster mode that I have added to Observium. It only display volume usage but no disk or network usage. Is it because the code expect a mode 7 device ? According to this document http://www.netapp.com/us/media/tr-4220.pdf (Table 27) it should expose some network stuff. I tried the .1.3.6.1.4.1.789.1.22.1 oid and it indeed returns data. I have attached discovery, poller and the snmpwalk of the OID mentioned. Best regards, Louis

1 0

Strange error
by Andrew Colin 16 Mar '16

16 Mar '16

Hi Guys Strange one When a device is down it always shows the downtime as per below Any ideas why it says 1year?

2 1

APC device detected as power instead of environment
by Louis Bailleul 15 Mar '16

15 Mar '16

Hi, I have a few APC AP9340 which are some environmental sensors collector. They are detected quite well but are categorized as Power device instead of Environmental. I have attached debug discovery and poller for one of them. Best regards, Louis

2 2

invalid args passed into function error @ r7676
by Rob VanHooren 15 Mar '16

15 Mar '16

greetings. I’m seeing this when running discovery of a c3750 ipbase v12.2(35)SE5 thoughts? thx. R. ##### Module Start: vlans ##### VLANs: CISCO-VTP-MIB (Domain 1) 1 172 192 666 999 1002 1003 1004 1005 1011 1020 1023 1024 1025 1027 1030 1031 1033 1035 1037 1039 1101 1102 1103 1104 1106 1107 1108 1110 2000 2008 2009 2010 2011 2012 2015 2016 2017 2019 2020 2021 2022 2023 2025 2026 2027 2030 2031 2032 2033 2034 2035 2037 2038 2039 2040 2045 2046 2047 2048 2049 2050 2051 2210 2221 4001 Q-BRIDGE-MIB Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. ERROR: Device does not support per-VLAN community. Module [ vlans ] stats: 1[V+] 172[V+] 192[V+] 666[V+] 999[V+] 1002[V+] 1003[V+] 1004[V+] 1005[V+] 1011[V+] 1020[V+] 1023[V+] 1024[V+] 1025[V+] 1027[V+] 1030[V+] 1031[V+] 1033[V+] 1035[V+] 1037[V+] 1039[V+] 1101[V+] 1102[V+] 1103[V+] 1104[V+] 1106[V+] 1107[V+] 1108[V+] 1110[V+] 2000[V+] 2008[V+] 2009[V+] 2010[V+] 2011[V+] 2012[V+] 2015[V+] 2016[V+] 2017[V+] 2019[V+] 2020[V+] 2021[V+] 2022[V+] 2023[V+] 2025[V+] 2026[V+] 2027[V+] 2030[V+] 2031[V+] 2032[V+] 2033[V+] 2034[V+] 2035[V+] 2037[V+] 2038[V+] 2039[V+] 2040[V+] 2045[V+] 2046[V+] 2047[V+] 2048[V+] 2049[V+] 2050[V+] 2051[V+] 2210[V+] 2221[V+] 4001[V+] o Duration 11.076s

1 0

multi site support?
by Bernd Kammlott | kaneo GmbH - green IT solutions 15 Mar '16

15 Mar '16

hey, currently we are using cacti to collect snmp data but your solutions looks much better :) Currently we are collecting data from all our customers into one centralized system on one of our servers. Would it be possible to have some kind of "multi site" installation with observium to give our customers access to their data? We dont want to setup Observium for each of our customers, but want them to be able to have a look at the current state their systems. I could not find any documentation about this feature, is is possible? Maybe with groups or locations? -- Mit freundlichen Grüßen Bernd Kammlott Systemintegration kaneo GmbH - green IT solutions | Lüner Weg 32a | D-21337 Lüneburg Tel.: +49 4131 22 700 73 | Mobil: +49 170 833 32 67 | E-Mail: bernd.kammlott(a)kaneo-gmbh.de Internet: www.kaneo-gmbh.de | www.facebook.com/kaneo.green.solutions Geschäftsführung: Andreas Kammlott, Nele Lübberstedt | Amtsgericht Lüneburg: HRB 205201 B | USt-ID: DE815486812 | Bitte prüfen Sie der Umwelt zuliebe, ob der Ausdruck dieser E-Mail erforderlich ist.|

5 8

Ethernet Service Instance Interface Names Truncated
by Mailing Lists 15 Mar '16

15 Mar '16

Am I imagining things, or did Observium previously correctly display Ethernet service instance interfaces in the GUI? I've noticed recently that all the interfaces names for service instance interfaces seem to be truncated in a few of the views Picture speaks a thousand words, where these show GigabitEthernet0/16. now, I am sure they previously would have been listed as GigabitEthernet0/16.ServiceInstance.1234 etc; [image: Inline images 1] [image: Inline images 4] Discovery debug example from the device shows the interfaces captured as the full name: ( [ifDescr] => GigabitEthernet0/1.ServiceInstance.206 [ifAlias] => Description [ifName] => Gi0/1.SI.206 [ifType] => l2vlan [ifOperStatus] => up ) If you search in the ports for for the full interface name it knows it as the right thing; [image: Inline images 2] Looks like the GUI just truncates the names? Obviously this makes it harder than it should be to identify the correct interface in the list. Any chance we can have this show the whole thing? :) Thanks, Tim C

6 11

Reporting Devices down when they are up
by Andrew Colin 15 Mar '16

15 Mar '16

Hi Guys I am getting a strange issue Observium is reporting certain devices as down when they are up. I can snmpwalk to them from the server but the gui says they are down Any ideas? Thanks Andrew

2 2

Cisco SG350 as Generic device
by chott＠praha1.net 15 Mar '16

15 Mar '16

Hello, please can you help me with new Cisco SG350XG switches? Snmpwalk attached Observium recognize this Cisco switch as Generic device Tom

2 2

SNMP access via poller issues
by Cameron Murray 15 Mar '16

15 Mar '16

Guys, Overnight we received a lot of alerts for device going offline however these were false positives. We've found that the poller is having issues connecting to some devices. Brocade ICX Switch Cisco 2900 series RouterOS SNMP is working via snmpwalk on the machine running obs and also from other test locations however the poller times out on them. We've reset the configuration for the devices in obs however access still fails. Access appears to come and go. We've confirmed obs is up to date and have rebooted the services. Regards, Cameron Murray Senior Communications Manager How am I doing? Please click here<http://www.techpath.com.au/contact-us/feedback/> to rate my work. [cid:image001.png@01D1739A.5BC99370]<http://www.techpath.com.au/> P 1300 033 300 F 07 3809 3999 E cameron(a)techpath.com.au www.techpath.com.au<http://www.techpath.com.au> Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 [Facebook]<http://www.facebook.com/techpathau> [Twitter]<http://twitter.com/techpathau> [LinkedIn]<http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd.

4 9

Reset password tool on main website
by Gavin Henry 15 Mar '16

15 Mar '16

Hi, Been waiting for a while now with two emails I know to work. Can someone check? Trying to get my subscription username as a renewed one still has the old one and it's just timed out now. Thanks. -- Kind Regards, Gavin Henry. http://www.surevoip.co.uk

4 23

cannot find device
by Jeffrey d'Ambly 14 Mar '16

14 Mar '16

I have a device that I cannot discover or delete, in observium Professional How can I fix this? mysql> select hostname, device_id FROM devices WHERE hostname LIKE 'ams-sw121'; +-----------+-----------+ | hostname | device_id | +-----------+-----------+ | ams-sw121 | 176 | +-----------+-----------+ 1 row in set (0.00 sec) mysql> exit Bye [root@sjc-corp-net01 ~]# /home/observium/discovery.php -h 176 Observium 0.15.5.6406 Discovery Current Revision : 6406 New Revision : 7674 WARNING: 0 devices discovered. Did you specify a device that does not exist? Memory usage: 4.5MB (peak: 4.5MB) MySQL: Cell[21/0.03s] Row[0/0s] Rows[2/0s] Column[0/0s] Update[0/0s] Insert[0/0s] Delete[0/0s] [root@sjc-corp-net01 ~]# [root@sjc-corp-net01 ~]# /home/observium/delete_device.php -h 176 Observium 0.15.5.6406 Remove Device Device -h doesn't exist! [root@sjc-corp-net01 ~]#

3 5

Is there a way to reset all interface errors
by Ron Culler 14 Mar '16

14 Mar '16

Looking to see if there is an easy way to reset all the interface errors across a device or devices? I'm trying to zero them out for a baseline Ron

1 0

Housekeeping - invalid RRD files
by Sean Pedersen 14 Mar '16

14 Mar '16

The instructions for the housekeeping script mention the cleanup of invalid RRD files and that doing so "requires $config['file'] to be set correctly to the path of the file magic utility." I can't find any reference to $config['file'], magic file utilities, etc. in the default config.php, my current config.php, or anywhere online, mailing list archives, etc. What is this in reference to? It doesn't seem to be set anywhere. Did I miss something? Consequently, whenever I run `housekeeping.php -r` with that option defaulted to TRUE, the process hangs and doesn't seem to do anything. Setting it to FALSE immediately deletes stale RRD files (by time via $config['housekeeping']['rrd']['age'] = timeInSeconds;) and completes the process. I checked housekeeping.log and there are no entries for 'invalid' (what I assume an invalid RRD file would log based on the rrd.inc.php module) and my log file goes back to 2014, so I know I’m not missing something that has rotated out. I'm running 0.16.3.7663 for reference.

4 4

Database schema out of whack
by Sean Pedersen 14 Mar '16

14 Mar '16

I’m not sure how this happened. I ran into some seemingly unrelated issues and one of the many issues I’ve been troubleshooting since is the apparent destruction of my database schema. Here’s the output of `discovery.php -u`: 000 -> 001 ... (db) done. 001 -> 002 ... (db) done (5 errors). 002 -> 003 ... (db) done (2 errors). 003 -> 004 ... (db) done (3 errors). 004 -> 005 ... (db) done (4 errors). 005 -> 006 ... (db) done. 006 -> 007 ... (db) done (1 errors). 007 -> 008 ... (db) done (1 errors). 008 -> 009 ... (db) done. 009 -> 010 ... (db) done (1 errors). 010 -> 011 ... (db) done. 011 -> 012 ... (db) done. 012 -> 013 ... (db) done (1 errors). 013 -> 014 ... (db) done. 014 -> 015 ... (db) done (1 errors). 015 -> 016 ... (db) done (4 errors). 016 -> 017 ... (db) done. 017 -> 018 ... (db) done (2 errors). 018 -> 019 ... (db) done. 019 -> 020 ... (db) done (6 errors). 020 -> 021 ... (db) done (1 errors). 021 -> 022 ... (db) done (1 errors). 022 -> 023 ... (db) done (5 errors). 023 -> 024 ... (db) done (2 errors). 024 -> 025 ... (db) done (10 errors). 025 -> 026 ... (db) done. 026 -> 027 ... (db) done. 027 -> 028 ... (db) done (11 errors). 028 -> 029 ... (db) done. 029 -> 030 ... (db) done (2 errors). 030 -> 031 ... (db) done (1 errors). 031 -> 032 ... (db) done (2 errors). 032 -> 033 ... (db) done. 033 -> 034 ... (db) done. 034 -> 035 ... (db) done (1 errors). 035 -> 036 ... (db) done (1 errors). 036 -> 037 ... (db) done. 037 -> 038 ... (db) done (2 errors). 038 -> 039 ... (db) done. 039 -> 040 ... (db) done. 040 -> 041 ... (db) done (2 errors). 041 -> 042 ... (db) done. 042 -> 043 ... (db) done (4 errors). 043 -> 044 ... (db) done (1 errors). 044 -> 045 ... (db) done (4 errors). 045 -> 046 ... (db) done. 046 -> 047 ... (db) done. 047 -> 048 ... (db) done (1 errors). 048 -> 049 ... (db) done (1 errors). 049 -> 050 ... (db) done. 050 -> 051 ... (db) done. 051 -> 052 ... (db) done. 052 -> 053 ... (db) done. 053 -> 054 ... (db) done (1 errors). 054 -> 055 ... (db) done (4 errors). 055 -> 056 ... (db) done (1 errors). 056 -> 057 ... (db) done (1 errors). 057 -> 058 ... (db) done (1 errors). 058 -> 059 ... (db) done (1 errors). 059 -> 060 ... (db) done (1 errors). 060 -> 061 ... (db) done (1 errors). 061 -> 062 ... (db) done (1 errors). 062 -> 063 ... (db) done (4 errors). 063 -> 064 ... (db) done. 064 -> 065 ... (db) done. 065 -> 066 ... (db) done. 066 -> 067 ... (db) done. 067 -> 068 ... (db) done (1 errors). 068 -> 069 ... (db) done. 069 -> 070 ... (db) done (1 errors). 070 -> 071 ... (db) done. 071 -> 072 ... (db) done (1 errors). 072 -> 073 ... (db) done. 073 -> 074 ... (php) Updating netscaler service RRDs 074 -> 075 ... (db) done (1 errors). 075 -> 076 ... (db) done (1 errors). 076 -> 077 ... (db) done. 077 -> 078 ... (db) done. 078 -> 079 ... (db) done. 079 -> 080 ... (db) done. 080 -> 081 ... (db) done. 081 -> 082 ... (db) done (1 errors). 082 -> 083 ... (db) done. 083 -> 084 ... (db) done. 084 -> 085 ... (db) done (1 errors). 085 -> 086 ... (db) done. 086 -> 087 ... (db) done (1 errors). 087 -> 088 ... (db) done. 088 -> 089 ... (db) done (5 errors). 089 -> 090 ... (db) done (3 errors). 090 -> 091 ... (db) done (1 errors). 091 -> 092 ... (db) done (2 errors). 092 -> 093 ... (db) done (2 errors). 093 -> 094 ... (db) done. 094 -> 095 ... (php) Converting alert serialize() arrays to JSON: ........................................ 095 -> 096 ... (db) done (1 errors). 096 -> 097 ... (db) done. 097 -> 098 ... (db) done. 098 -> 099 ... (db) done (1 errors). 099 -> 100 ... (db) done (1 errors). 100 -> 101 ... (db) done (1 errors). 101 -> 102 ... (db) done. 102 -> 103 ... (db) done (1 errors). 103 -> 104 ... (db) done (1 errors). 104 -> 105 ... (db) done. 105 -> 106 ... (db) done (2 errors). 106 -> 107 ... (db) done. 107 -> 108 ... (db) done (1 errors). 108 -> 109 ... (db) done. 109 -> 110 ... (db) done (1 errors). 110 -> 111 ... (db) done (2 errors). 111 -> 112 ... (db) done (1 errors). 112 -> 113 ... (db) done. 113 -> 114 ... (db) done (1 errors). 114 -> 115 ... (db) done (1 errors). 115 -> 116 ... (db) done. 116 -> 117 ... (db) done. 117 -> 118 ... (db) done. 118 -> 119 ... (db) done. 119 -> 120 ... (db) done. 120 -> 121 ... (db) done. 121 -> 122 ... (db) done (3 errors). 122 -> 123 ... (db) done. 123 -> 124 ... (db) done (1 errors). 124 -> 125 ... (db) done (1 errors). 125 -> 126 ... (db) done (2 errors). 126 -> 127 ... (php) Converting FDB count RRD ds fdb->value: ...................................................................................................................................................................................................................................................... 127 -> 128 ... (php) Rename old storage RRDs and DB: 128 -> 129 ... (php) Rename old mempools RRDs and DB: 129 -> 130 ... (db) done. 130 -> 131 ... (db) done. 131 -> 132 ... (db) done. 132 -> 133 ... (db) done (1 errors). 133 -> 134 ... (db) done (1 errors). 134 -> 135 ... (db) done (1 errors). 135 -> 136 ... (db) done (1 errors). 136 -> 137 ... (db) done. 137 -> 138 ... (db) done. 138 -> 139 ... (db) done (4 errors). 139 -> 140 ... (db) done. 140 -> 141 ... (db) done (3 errors). 141 -> 142 ... (db) done (1 errors). 142 -> 143 ... (db) done. 143 -> 144 ... (db) done. 144 -> 145 ... (db) done (1 errors). 145 -> 146 ... (db) done. 146 -> 147 ... (db) done. 147 -> 148 ... (db) done (3 errors). 148 -> 149 ... (db) done. 149 -> 150 ... (db) done (6 errors). 150 -> 151 ... (db) done. 151 -> 152 ... (db) done. 152 -> 153 ... (php) Converting RRD ds type for tcpCurrEstab COUNTER->GAUGE: ....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... 153 -> 154 ... (db) done (1 errors). 154 -> 155 ... (db) done (1 errors). 155 -> 156 ... (db) done (1 errors). 156 -> 157 ... (db) done (1 errors). 157 -> 158 ... (db) done (1 errors). 158 -> 159 ... (db) done. 159 -> 160 ... (db) done. 160 -> 161 ... (db) done (1 errors). 161 -> 162 ... (db) done. 162 -> 163 ... (db) done. 163 -> 164 ... (php) Superseded by update 165 164 -> 165 ... (php) Adding MIN RRA to very old RRD files: * hr_processes: ..... * hr_users: ..... * ucd_contexts: ... * ucd_load: ... * ucd_interrupts: ... 165 -> 166 ... (db) done (1 errors). 166 -> 167 ... (db) done. 167 -> 168 ... (db) done. 168 -> 169 ... (db) done. 169 -> 170 ... (php) Move old GEO data if exist: ---------------- 170 -> 171 ... (db) done. 171 -> 172 ... (db) done. 172 -> 173 ... (db) done. 173 -> 174 ... (db) done (3 errors). 174 -> 175 ... (db) done (2 errors). 175 -> 176 ... (php) Clean incorrect syslog entries: 176 -> 177 ... (php) Clean incorrect manual geolocation: 177 -> 178 ... (db) done (5 errors). 178 -> 179 ... (db) done (2 errors). 179 -> 180 ... (db) done. 180 -> 181 ... (db) done. 181 -> 182 ... (db) done. 182 -> 183 ... (db) done. 183 -> 184 ... (db) done (3 errors). 184 -> 185 ... (db) done. 185 -> 186 ... (db) done (9 errors). 186 -> 187 ... (php) 187 -> 188 ... (db) done. 188 -> 189 ... (db) done (2 errors). 189 -> 190 ... (db) done (2 errors). 190 -> 191 ... (php) Migrating state sensors to status entries: 191 -> 192 ... (db) done (2 errors). 192 -> 193 ... (db) done (1 errors). 193 -> 194 ... (db) done (1 errors). 194 -> 195 ... (db) done (3 errors). 195 -> 196 ... (db) done (1 errors). 196 -> 197 ... (db) done. 197 -> 198 ... (db) done. 198 -> 199 ... (db) done. 199 -> 200 ... (db) done (2 errors). 200 -> 201 ... (db) done. 201 -> 202 ... (db) done. 202 -> 203 ... (db) done (1 errors). 203 -> 204 ... (db) done. 204 -> 205 ... (db) done. 205 -> 206 ... (db) done (4 errors). 206 -> 207 ... (db) done (1 errors). 207 -> 208 ... (db) done (1 errors). 208 -> 209 ... (db) done (5 errors). 209 -> 210 ... (php) 210 -> 211 ... (db) done (3 errors). 211 -> 212 ... (php) 212 -> 213 ... (db) done (11 errors). 213 -> 214 ... (db) done. 214 -> 215 ... (db) done (1 errors). 215 -> 216 ... (db) done (2 errors). 216 -> 217 ... (db) done. 217 -> 218 ... (db) done. 218 -> 219 ... (db) done. 219 -> 220 ... (db) done (4 errors). 220 -> 221 ... (db) done (1 errors). 221 -> 222 ... (db) done. 222 -> 223 ... (db) done (1 errors). 223 -> 224 ... (db) done. 224 -> 225 ... (db) done. 225 -> 226 ... (db) done. 226 -> 227 ... (db) done (2 errors). 227 -> 228 ... (db) done (10 errors). 228 -> 229 ... (db) done (1 errors). 229 -> 230 ... (db) done (1 errors). 230 -> 231 ... (db) done. 231 -> 232 ... (db) done. 232 -> 233 ... (db) done (2 errors). 233 -> 234 ... (db) done (1 errors). 234 -> 235 ... (db) done. 235 -> 236 ... (db) done (1 errors). 236 -> 237 ... (db) done. 237 -> 238 ... (db) done. 238 -> 239 ... (db) done (1 errors). 239 -> 240 ... (db) done (3 errors). 240 -> 241 ... (db) done. 241 -> 242 ... (db) done. 242 -> 243 ... (db) done. 243 -> 244 ... (db) done (3 errors). 244 -> 245 ... (db) done. 245 -> 246 ... (db) done (1 errors). 246 -> 247 ... (db) done (1 errors). 247 -> 248 ... (db) done. 248 -> 249 ... (db) done (1 errors). 249 -> 250 ... (db) done. 250 -> 251 ... (db) done (1 errors). 251 -> 252 ... (db) done (1 errors). 252 -> 253 ... (db) done. 253 -> 254 ... (db) done. 254 -> 255 ... (db) done (1 errors). 255 -> 256 ... (php) 256 -> 257 ... (php) 257 -> 258 ... (php) 258 -> 259 ... (db) done. 259 -> 260 ... (php) 260 -> 261 ... (db) done (5 errors). 261 -> 262 ... (php) 262 -> 263 ... (db) done (1 errors). 263 -> 264 ... (db) done (8 errors). 264 -> 265 ... (db) done (1 errors). 265 -> 266 ... (db) done. 266 -> 267 ... (db) done. 267 -> 268 ... (php) 268 -> 269 ... (php) 269 -> 270 ... (db) done. 270 -> 271 ... (db) done (11 errors). -- Done. So…there are a couple of errors. I grabbed a few samples of db.log and found several examples where columns are missing. Pretty much 99% of the log is failed queries to nonexistent database fields, columns, etc. Here’s two: [2016/03/11 21:39:25 -0700] poller.php(22166): Failed dbQuery (#1054 - Unknown column 'attrib_value' in 'field list'), Query: SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema'; mysql> describe observium_attribs; +---------+---------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +---------+---------+------+-----+---------+-------+ | version | int(11) | NO | PRI | NULL | | +---------+---------+------+-----+---------+-------+ 1 row in set (0.00 sec) [2016/03/11 21:43:34 -0700] poller.php(18006): Failed dbQuery (#1054 - Unknown column 'device_id' in 'where clause'), Query: SELECT * FROM `devices_attribs` WHERE `device_id` = '136' mysql> describe devices_attribs; +--------------+--------------+------+-----+-------------------+-----------------------------+ | Field | Type | Null | Key | Default | Extra | +--------------+--------------+------+-----+-------------------+-----------------------------+ | attrib_id | int(11) | NO | PRI | NULL | auto_increment | | entity_type | varchar(32) | NO | | NULL | | | entity_id | int(11) | NO | MUL | NULL | | | attrib_type | varchar(128) | NO | | NULL | | | attrib_value | text | NO | | NULL | | | updated | timestamp | NO | | CURRENT_TIMESTAMP | on update CURRENT_TIMESTAMP | +--------------+--------------+------+-----+-------------------+-----------------------------+ 6 rows in set (0.00 sec) Outside of `discovery.php -u` that is failing, is it possible to recover the schema? I would imagine doing it manually is the only way. Is it worth it?

2 7

Newbie with a question
by Daniel Martín Mayo 14 Mar '16

14 Mar '16

Hello everybody, Im new to this mailing list and also to Observium. Im just another SysAdmin trying to monitor as many devices as we can in our company (Nagios is still doing his job fine), so we started trying Observium just to see if it was worthy or not. I got installed the Community version using the OVA, so first question is: If I switch to the Pro version, do I need to rebuild all the work Ive done? Greetings from Spain, Dani Martin

5 8

Delay on down devices
by Louis Bailleul 14 Mar '16

14 Mar '16

Hi, Is it possible to add a delay for the built in down device alert ? Or even better, can I replace the built in alert with custom checkers ? So I can add a delay on specifics sets of devices. Best regards, Louis [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/PGS_LOGO_RGB_42x53px.jpg]<http://www.pgs.com> Louis Bailleul Computer Systems Engineer Imaging & Engineering | Imaging Telephone: +44 1932 376000 Direct: +44 1932 376842 VOIP: 74416842 Mobile: +44 7786 525307 Email: louis.bailleul(a)pgs.com<mailto:Louis.Bailleul@pgs.com> A Clearer Image | www.pgs.com<http://www.pgs.com> [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/150731-ColourWave-660x14…] Address: 4 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, United Kingdom This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

4 8

backup script for db, config.php, rrd/
by Nick Schmalenberger 14 Mar '16

14 Mar '16

Hi all, I spent my Sunday afternoon (on-call, luckily quiet though :) writing this backup script for Observium. It takes a backup destination directory and number of backups to keep using rotation which is 0 by default. Then it makes a tmp directory. It copies config.php there, does a mysql dump, and copies rrd/ into the tmp directory. It tars up the tmp directory into a tarball in the backup directory and deletes the tmp directory. It is meant to run from the scripts/ directory, it maybe isnt as polished as the other main scripts or compatible with all systems because of different options with the commands it runs. Its working for me though on my Ubuntu 14.04 test system. Please offer suggestions! Thanks. -Nick

1 1

How to reset the Admin password
by Sathish.I 12 Mar '16

12 Mar '16

Hello All, Can you please let me know how to reset GUI admin password. I have lost the password. Regards, sathish

3 6

Changing the Mysql connections graph format
by Louis Bailleul 11 Mar '16

11 Mar '16

Hi, I found the Mysql connections graph a little difficult to read. So I changed it to use lines instead of stacked area. It is still not perfect because of the huge scale imposed by drawing the maximum number of connection and maximum number of connection reached. But at least you can actually read the value of your spikes of connections instead of working out the difference between the number of connection + max number of connection reached. Before : [cid:image001.png@01D17BB3.BAD5C7F0] After : [cid:image002.png@01D17BB3.BAD5C7F0] The diff of the file : svn diff -r HEAD /opt/observium/html/includes/graphs/application/mysql_connections.inc.php Index: /opt/observium/html/includes/graphs/application/mysql_connections.inc.php =================================================================== --- /opt/observium/html/includes/graphs/application/mysql_connections.inc.php (revision 7661) +++ /opt/observium/html/includes/graphs/application/mysql_connections.inc.php (working copy) @@ -40,6 +40,6 @@ $nototal = 1; $unit_text = "Connections"; -include("includes/graphs/generic_multi_simplex_separated.inc.php"); +include("includes/graphs/generic_multi_line.inc.php"); // EOF Best regards, Louis [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/PGS_LOGO_RGB_42x53px.jpg]<http://www.pgs.com> Louis Bailleul Computer Systems Engineer Imaging & Engineering | Imaging Telephone: +44 1932 376000 Direct: +44 1932 376842 VOIP: 74416842 Mobile: +44 7786 525307 Email: louis.bailleul(a)pgs.com<mailto:Louis.Bailleul@pgs.com> A Clearer Image | www.pgs.com<http://www.pgs.com> [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/150731-ColourWave-660x14…] Address: 4 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, United Kingdom This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

1 0

Howto Integrate observium alerts with external event monitoring tool
by Ruiz, Carlos 11 Mar '16

11 Mar '16

good morning everyone, We're evaluating to use observium as our hardware monitoring solution for some datacenters, but we need to clearly understand how can we integrate the generated alerts in the tool with external event monitoring solutions that are the ones used by our Operation Center guys. I guess that we can run queries against the mysql table hosting such events, is there any other possibilities? Maybe interact with mysql DB is the recommended way, that way can any of you share with me the data model of such table? Thanks in advance for your help and sorry for the generic questions, but we're starting with the evaluation activity and we're at observium rookie level Kind Regards -- Carlos Ruiz Compute System Management Senior Engineer Roche Farma, S.A.Josefa Valcarcel, 40. ES-28027 Madrid (Spain) Phone: +34 91 305 99 25 Mobile: +34 662 10 46 14 * *

2 1

Avoid adding round robin dns devices
by Louis Bailleul 11 Mar '16

11 Mar '16

Hi, I have some devices that are configured with a round robin DNS entry. I believe that as we are running lldp on servers too, the auto discovery pick them up and add them. But as the picture below shows, this is pretty much useless as each polling end up on a different server. (You can see that the sysdescr and sysname contains contradictory data : lxfer01 and lxfer02) Would it be possible to detect that the FQDN is a round robin alias and avoid adding it as a new device ? And it would be perfect if it could be the same for CNAME as well, as it is not really worthwhile having Observium polling a node for each of its aliases. [cid:image001.png@01D17B91.B4998790] Best regards, Louis [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/PGS_LOGO_RGB_42x53px.jpg]<http://www.pgs.com> Louis Bailleul Computer Systems Engineer Imaging & Engineering | Imaging Telephone: +44 1932 376000 Direct: +44 1932 376842 VOIP: 74416842 Mobile: +44 7786 525307 Email: louis.bailleul(a)pgs.com<mailto:Louis.Bailleul@pgs.com> A Clearer Image | www.pgs.com<http://www.pgs.com> [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/150731-ColourWave-660x14…] Address: 4 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, United Kingdom This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

3 4

I got alert mail in every 5 minutes. Bug? V2 :)
by Laszlo Nemeth 11 Mar '16

11 Mar '16

Hi All, Some week ago i wrote a mail because we found an alert bug and we got lot of mails (in every 5. minutes) instead of just 1 in 24 hours. This Observium was an updated from the 2015.07 CE to the latest (CE.0.16.1.7533). We thougth that the problem was because of the upgrade process and the alert function was new and something went bad.... Now i made a clear install of the latest Observium CE from .tgz. I added only one host, add the same alert, and i’m receiving again the alerts mail in every 5. minutes. I didn’t touch any file just the config.php because of the SQL access of the Observium! I added a host (emaussw01). It is a Cisco Nexus device with 7 FEX modules. I see the temperatures of FEXs (4 values from every FEX) all is under 50C but not one module. This module are the "FEX-111 Module-1 Die-1". This is over 50C. I add an alert, export is this: <?xml version="1.0"?> <templates> <template type="alert" description="Autogenerated observium template" version="0.91" created="Thu, 10 Mar 2016 15:29:04 +0100" observium="0.16.1.7533" id="73249fd2b23ef5f715d749ce2e98be41"> <entity_type>sensor</entity_type> <name>emaussw01 temp check</name> <message>Temp alarm!</message> <severity>crit</severity> <suppress_recovery>0</suppress_recovery> <delay>0</delay> <conditions_and>1</conditions_and> <conditions>sensor_value gt 50</conditions> <conditions_complex>sensor_value gt 50</conditions_complex> <associations> <device>hostname eq emaussw01</device> <entity>sensor_class is temperature</entity> </associations> </template> </templates> I associated one user for this check via email alert. Alert history is: Date Device Alert Check Entity Message Status 2016-03-10 15:38:26 emaussw01 emaUSSW01 temp check Fex-111 Module-1 Die-1 Alert notification sent ALERT_NOTIFY 2016-03-10 15:34:15 emaussw01 emaUSSW01 temp check Fex-111 Module-1 Die-1 Alert notification sent ALERT_NOTIFY 2016-03-10 15:29:12 emaussw01 emaUSSW01 temp check Fex-111 Module-1 Die-1 Alert notification sent ALERT_NOTIFY 2016-03-10 15:24:06 emaussw01 emaUSSW01 temp check Fex-111 Module-1 Die-1 Alert notification sent ALERT_NOTIFY 2016-03-10 15:18:29 emaussw01 emaUSSW01 temp check Fex-111 Module-1 Die-1 Alert notification sent ALERT_NOTIFY 2016-03-10 15:14:07 emaussw01 emaUSSW01 temp check Fex-111 Module-1 Die-1 Alert notification sent ALERT_NOTIFY 2016-03-10 15:08:29 emaussw01 emaUSSW01 temp check Fex-111 Module-1 Die-1 Alert notification sent ALERT_NOTIFY 2016-03-10 15:03:51 emaussw01 emaUSSW01 temp check Fex-111 Module-1 Die-1 Alert notification sent ALERT_NOTIFY And i got email allways (1 minutes earlier) when ALERT_NOTIFY is present in the log: # grep -i "Date: Thu” /var/spool/mail/obstestuser Date: Thu, 10 Mar 2016 15:02:50 +0100 Date: Thu, 10 Mar 2016 15:07:28 +0100 Date: Thu, 10 Mar 2016 15:13:07 +0100 Date: Thu, 10 Mar 2016 15:17:28 +0100 Date: Thu, 10 Mar 2016 15:23:06 +0100 Date: Thu, 10 Mar 2016 15:28:11 +0100 Date: Thu, 10 Mar 2016 15:33:14 +0100 Date: Thu, 10 Mar 2016 15:37:26 +0100 What can i debug for resolve this problem? Thanks! Regards Laszlo

3 6

freeradius agent and "PHP Fatal error: Call-time pass-by-reference has been removed in" [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 11 Mar '16

11 Mar '16

ref 1: http://wiki.freeradius.org/config/Status ref 2: http://stackoverflow.com/questions/8971261/php-5-4-call-time-pass-by-refere… freeradius v3.0 php5 v5.5 I've updated $radmsg IAW ref 1 $radmsg = "Message-Authenticator = 0x00, FreeRADIUS-Statistics-Type = $ statstype, Response-Packet-Type = Access-Accept"; running radclient as noted in ref1 also works. So all setup and working. ref2 indicates the fault is easy to fix but i can't understand it. -------- dc2radius1:/usr/lib/observium_agent/local root $ ./freeradius PHP Fatal error: Call-time pass-by-reference has been removed in /usr/lib/observium_agent/local/freeradius on line 54 -------- line 54: exec("echo '$radmsg' | $radcmd", &$out, $retval); how might line 54 be altered to actually run. The alternatively is to rewrite it as a shell script (cause thats how programmers work, they rewrite in the language they know). thanks Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine(a)familycourt.gov.au ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

4 6

Alert Checks on Observium reports device down when they are actually not
by Arya, Renuka [MED] 10 Mar '16

10 Mar '16

Hi Team, I have setup the following Alert on my Observium device. See attachment (Alert_DeviceDown). I sometimes get the alerts that the device is down . See attachment (Devices_Down). However, the devices were actually not down. So most likely it is the Server on which Observium is install, do not get a ping response from the switch(device we monitoring). I ran MTR tests between the Observium server and switch in question, I don't see any packet losses, but I do see average RTT of 0.2 ms and worst RTT as 3.8 ms. So, is it possible when Observium does not get a ping response from the switch in the desirable amount of time, it marks it DOWN. How this desirable amount is calculated. Is there way we can edit this? Or is there any other recommended way for monitoring the devices? Thanks! Regards Renuka ******************************************************************************** This e-mail is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged and confidential. If the reader of this e-mail message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is prohibited. If you have received this e-mail in error, please notify the sender and destroy all copies of the transmittal. Thank you University of Chicago Medicine and Biological Sciences ********************************************************************************

4 8

CE-edition; Sorting of Health-status columns?
by Pål Rydningen 09 Mar '16

09 Mar '16

Is it a design-choice to not being able to sort by columns in the Health page? As in ... Sort ascending/decending by Memory Usage, Toner usage, CPU etc. This is CE edition. -- Pål R.

2 2

db.log full after upgrade to Observium CE 0.16.1.7533
by Mike Driscoll 09 Mar '16

09 Mar '16

After upgrade, all seemed well until my disk filled up. db.log contains countless entries about unknown columns. A couple examples are below. I completed the schema update and full discovery at the end of the upgrade process per: http://www.observium.org/docs/updating/ <http://www.observium.org/docs/updating/>. Rerunning discovery.php -u says my schema is up to date. But something isn’t right. Is there a way to force the schema update to run again? Perhaps that will install all the missing columns? [2016/03/07 18:01:22 +0000] poller.php(9947): Failed dbQuery (#1054 - Unknown column 'port_label_short' in 'field list'), Query: UPDATE `ports` set `port_label` ='Vlan1',`port_label_short` ='Vlan1',`ifLastChange` ='2016-03-04 22:27:35' WHERE `port_id` = '2412' [2016/03/07 16:16:10 +0000] poller.php(23363): Failed dbQuery (#1054 - Unknown column 'entity_id' in 'field list'), Query: INSERT INTO `eventlog` (`device_id`,`entity_id`,`entity_type`,`timestamp`,`severity`,`message`) VALUES ('78','42018','port',NOW(),'6','Interface changed: [port_label] \'\' -> \'xe-0/1/1\'; [port_label_short] \'\' -> \'xe-0/1/1\'; [ifLastChange] \'2015-04-27 15:45:11\' -> \'2015-04-27 22:47:09\'')

5 10

Alert by CustomOID
by chott＠praha1.net 09 Mar '16

09 Mar '16

Hello everybody,§ Can i create Alert check for CustomOID value ? Tom

2 2

freeradius agent and "PHP Fatal error: Call-time pass-by-reference has been removed in" [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 09 Mar '16

09 Mar '16

ref 1: http://wiki.freeradius.org/config/Status ref 2: http://stackoverflow.com/questions/8971261/php-5-4-call-time-pass-by-refere… freeradius v3.0 php5 v5.5 I've updated $radmsg IAW ref 1 $radmsg = "Message-Authenticator = 0x00, FreeRADIUS-Statistics-Type = $ statstype, Response-Packet-Type = Access-Accept"; running radclient as noted in ref1 also works. So all setup and working. ref2 indicates the fault is easy to fix but i can't understand it. -------- dc2radius1:/usr/lib/observium_agent/local root $ ./freeradius PHP Fatal error: Call-time pass-by-reference has been removed in /usr/lib/observium_agent/local/freeradius on line 54 -------- line 54: exec("echo '$radmsg' | $radcmd", &$out, $retval); how might line 54 be altered to actually run. The alternatively is to rewrite it as a shell script (cause thats how programmers work, they rewrite in the language they know). thanks Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine(a)familycourt.gov.au ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

1 0

ZFS on Linux
by Ximena Cardinali 08 Mar '16

08 Mar '16

Hello there, is there anyone around here using ZFS on Linux (more precisely Debian) and made it work with Observium and SNMP? We just implemented ZFS on some Servers and we would like to monitor the pools within Observium. Regards, Ximena.

3 2

Poller-wrapper - get_http_request() exit with timeout
by Ivan Biasi 08 Mar '16

08 Mar '16

Hi all does anyone ever met the following timeout error message during the polling cycle ? Any idea on what's the impact and how to solve ? Here following a section of the log file made by the output of: */5 * * * * root /opt/observium/poller-wrapper.py 5 >> /opt/observium/logs/poller-wrapper.log 2>&1 ================================================== .... [2016/03/07 15:15:34 +0100] poller.php(29544): /opt/observium/poller.php: <hostname...> - 1 devices polled in 1.546 secs [2016/03/07 15:15:38 +0100] poller.php(29402): /opt/observium/poller.php: <hostname...> - 1 devices polled in 6.969 secs [2016/03/07 15:15:39 +0100] poller-wrapper.py(27564): /opt/observium/poller-wrapper.py: polled 25 devices in 37 seconds with 5 workers [2016/03/07 15:20:05 +0100] poller.php(29849): get_http_request() exit with timeout. Access to outside localnet is blocked by firewall or network problems. Check pr oxy settings. ... ... [2016/03/07 15:20:50 +0100] poller-wrapper.py(29826): /opt/observium/poller-wrapper.py: polled 25 devices in 47 seconds with 5 workers [2016/03/07 15:25:02 +0100] poller.php(816): get_http_request() exit with timeout. Access to outside localnet is blocked by firewall or network problems. Check proxy settings. ================================================== The system is apparently collecting data but, being a new test/evaluation activation, I don't known if something is missing. Thanks a lot, regards I.

3 5

Problem with new Cisco switches
by chott＠praha1.net 08 Mar '16

08 Mar '16

Hello team, we have new Cisco SG350XG 10gbit switches, but we have problem with Discovery because Observium resolve as "Generic device" iso.3.6.1.2.1.1.1.0 = STRING: "SG350XG-2F10 12-Port 10G Stackable Managed Switch" iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.9.6.1.91.12.9 iso.3.6.1.2.1.1.3.0 = Timeticks: (3550400) 9:51:44.00 iso.3.6.1.2.1.1.4.0 = STRING: "" iso.3.6.1.2.1.1.5.0 = STRING: "" iso.3.6.1.2.1.1.6.0 = STRING: "" iso.3.6.1.2.1.1.7.0 = INTEGER: 6 iso.3.6.1.2.1.1.8.0 = Timeticks: (0) 0:00:00.00 iso.3.6.1.2.1.1.9.1.2.1 = OID: iso.3.6.1.4.1.89.73 iso.3.6.1.2.1.1.9.1.3.1 = STRING: "RS capabilities" iso.3.6.1.2.1.1.9.1.4.1 = Timeticks: (0) 0:00:00.00 [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

1 2

Create an alert checker on a custom OID
by Fredrik Winäs 07 Mar '16

07 Mar '16

Hi I have a couple of custom OID that I track, is it possible to make an alert checker on these? [cid:image001.png@01D1788A.29969750] thanks Med Vänlig Hälsning Fredrik Winäs tel +46 31 762 02 43 fredrik.winas(a)cgit.se<mailto:fredrik.winas@cgit.se> www.cgit.se<http://www.cgit.se/> CGit AB Taljegårdsgatan 11C SE-431 53 Mölndal

2 1

PPPoE session graphs on ASR1000
by Senses0 07 Mar '16

07 Mar '16

Hi, PPPoE graphs on our Cisco ASR1000 boxes no longer has any value. This is starting from a little over a week ago. Are these MIBS removed or these graphs have been removed? Have a look at the attached screenshot.

1 0

Re: [Observium] Set fixed scale of Y-axis on mini-graphs?
by Henrik Cednert (Filmlance) 06 Mar '16

06 Mar '16

Impossibruuu? -- Henrik Cednert cto | td | compositor Filmlance International mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ] On 04/02/16 09:40, "observium on behalf of Henrik Cednert (Filmlance)" <observium-bounces(a)observium.org on behalf of henrik.cednert(a)filmlance.se> wrote: >Hello > >I'd like to set fixed values of the Y axis on the minigraphs. Is that possible? I don't find much value of the adaptive scaling since it means I have to read the AXIS and not only throw a quick eye at it to see anomalies. > >Cheers and thans > >-- >Henrik Cednert >cto | td | compositor > >Filmlance International >Direct + 46 (0)704 71 89 54 > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 5

Observium-Rancid Integration
by Sathish.I 05 Mar '16

05 Mar '16

Hello All, I have integrated the rancid with observium. In the initial stage for 2 days it worked well, backup are pulled as per cronjob. After some days, I observed backup are happening few devices rest are shown in GUI. However, when I checked the status in /var/lib/rancid/observium/configs/ the backup files are successfully taken And when checked the rancid logs in /var/log/rancid/ I have seen for few devices (which shown in GUI) the Sending configs/xxxx Sending configs/yyyy Transmitting file data .. Committed revision 216. NOTE: The list varies from time to time. Please suggest what could be the issue and solution if any. Regards, sathish

2 1

Cannot add CAB 4+ printer
by Ronald 05 Mar '16

05 Mar '16

I'm working for a small company in the floral sector. We have several types of printers. From conventional multifunctionals to label printers (CAB, Zebra). I can add the Zebra printers, but not the cab printers. It appears that Observium is looking for objects with a different suffix. I searched around the site and did some Googling. But I was not able to sort this out myself. [root@bl-bug01 bl]# tcpdump -i ens32 host 192.168.0.153 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on ens32, link-type EN10MB (Ethernet), capture size 65535 bytes 11:29:00.627323 IP bl-bug01.bloominess.nl.54058 > bl_planten_artikel.snmp: GetRequest(42) system.sysObjectID.0 system.sysUpTime.0 11:29:00.628053 IP bl_planten_artikel.snmp > bl-bug01.bloominess.nl.54058: GetResponse(48) system.sysObjectID.0=[noSuchObject] system.sysUpTime.0=[noSuchObject] 11:29:00.651719 IP bl-bug01.bloominess.nl.36372 > bl_planten_artikel.snmp: GetRequest(31) E:39165.1.1.0 11:29:00.652297 IP bl_planten_artikel.snmp > bl-bug01.bloominess.nl.36372: GetResponse(35) E:39165.1.1.0=[noSuchObject] 11:29:05.643513 ARP, Request who-has bl_planten_artikel tell bl-bug01.bloominess.nl, length 28 11:29:05.643808 ARP, Reply bl_planten_artikel is-at 00:02:e7:05:47:66 (oui Unknown), length 46 11:29:06.332982 ARP, Request who-has bl_planten_artikel tell bl_planten_artikel, length 46 ^C 7 packets captured 7 packets received by filter 0 packets dropped by kernel [root@bl-bug01 bl]# [root@bl-bug01 bl]# [root@bl-bug01 bl]# [root@bl-bug01 bl]# snmpwalk -v2c -c public 192.168.0.153 SNMPv2-MIB::sysDescr.1 = STRING: A4+/300 (3.38/May 8 2015) SNMPv2-MIB::sysObjectID.1 = OID: SNMPv2-SMI::enterprises.15865.1.1 SNMPv2-MIB::sysUpTime.1 = Timeticks: (190538900) 22 days, 1:16:29.00 Am I missing something? Ronald

2 1

Alerts rrd in wrong directory
by Louis Bailleul 04 Mar '16

04 Mar '16

Hi all, I just noticed that the rrd for my alerts have been created in the root rrd directoy instead of in each device directory. Is this a known issue ? The alerts availability graphs don’t work as they look for the rrd in the wrong place : RRDTool Output: ERROR: opening '/data/observium/rrd/lswc11u21 /alert-3375.rrd': No such file or directory Total time: 0.012 | RRDtool time: 0.011s # ls -l rrd/alert-337* | head -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3370.rrd -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3371.rrd -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3372.rrd -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3373.rrd -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3374.rrd -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3375.rrd -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3376.rrd -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3377.rrd -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3378.rrd -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3379.rrd It looks like only the visualization code is looking for the rrd in the wrong place. As If I copy the rrd into the right directory the graph is displayed correctly and it shows that it has been updated when the alert failed. I am using the stable svn version : # svn info Path: . Working Copy Root Path: /data/observium URL: http://svn.observium.org/svn/observium/branches/stable Repository Root: http://svn.observium.org/svn Repository UUID: 61d68cd4-352d-0410-923a-c4978735b2b8 Revision: 7599 Node Kind: directory Schedule: normal Last Changed Author: adama Last Changed Rev: 7535 Last Changed Date: 2016-01-27 13:11:02 +0000 (Wed, 27 Jan 2016) Best regards, Louis [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/PGS_LOGO_RGB_42x53px.jpg]<http://www.pgs.com> Louis Bailleul Computer Systems Engineer Imaging & Engineering | Imaging Telephone: +44 1932 376000 Direct: +44 1932 376842 VOIP: 74416842 Mobile: +44 7786 525307 Email: louis.bailleul(a)pgs.com<mailto:Louis.Bailleul@pgs.com> A Clearer Image | www.pgs.com<http://www.pgs.com> [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/150731-ColourWave-660x14…] Address: 4 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, United Kingdom This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

2 4

white spaces in the graphs
by Sathish.I 04 Mar '16

04 Mar '16

Hello All, We are observing white spaces in the graphs. Could you please help to resolve the issue. Crontacb. 5 * * * * root /opt/observium/poller.php -h all >> /dev/null 2>&1 5 * * * * root /opt/observium/discovery.php -h new >> /dev/null 2>&1 5 * * * * root /opt/observium/poller-wrapper.py 10 >> /dev/null 2>&1 Config.php -------------------------------------------------------------------------- // Base directory $config['install_dir'] = "/opt/observium"; // Default community list to use when adding/discovering $config['snmp']['community'] = array("public"); // Authentication Model $config['auth_mechanism'] = "mysql"; // default, other options: ldap, http-auth, please see documentation for config help // Enable alerter (not available in CE) $config['poller-wrapper']['alerter'] = TRUE; Regards, sathi

4 9

Purchasing the Professional Edition
by Matthew Hawes 04 Mar '16

04 Mar '16

Greetings everyone I was on this list serv in my previous job and I found it to be a great resource for my Observium installation! Great product ! I know this was brought up on numerous occasions in the past (I tried accessing the archive but had no luck with the link so my apologies and haven't been on the listserv in about 6 months) but are there any other methods to pay for the professional version ? Our team took a look at Observium Community and one downside we all brought up was lack of alerting and the payment method. Thank you and have a great day! Matt Hawes Infrastructure Administrator Purdue University Calumet 219-989-2590 Matthew.Hawes(a)purduecal.edu<mailto:Matthew.Hawes@purduecal.edu>

1 0

SNMPv3 Cisco Meraki AP
by Ben Maschke 04 Mar '16

04 Mar '16

Hi guys, I can query the AP's from the Observium server via CLI: snmpwalk -v3 -a sha -A XXX -u netadmin -x des -X XXX -l authpriv HS-AP-MERAKI-01 iso.3.6.1.2.1.1.1.0 = STRING: "Meraki MR42 Cloud Managed AP" iso.3.6.1.2.1.1.5.0 = STRING: "HS-AP-MERAKI-02" iso.3.6.1.2.1.1.9.1.2.1 = OID: iso.3.6.1.6.3.1 iso.3.6.1.2.1.1.9.1.2.2 = OID: iso.3.6.1.6.3.16.2.2.1 iso.3.6.1.2.1.1.9.1.2.3 = OID: iso.3.6.1.2.1.31 iso.3.6.1.2.1.1.9.1.2.4 = OID: iso.2.840.10036 iso.3.6.1.2.1.1.9.1.3.1 = STRING: "The MIB module for SNMPv2 entities" iso.3.6.1.2.1.1.9.1.3.2 = STRING: "View-based Access Control Model for SNMP." iso.3.6.1.2.1.1.9.1.3.3 = STRING: "The MIB module to describe generic objects for network interface sub-layers" iso.3.6.1.2.1.1.9.1.3.4 = STRING: "The MIB module for managing 802.11 implementations" iso.3.6.1.2.1.1.9.1.4.1 = Timeticks: (0) 0:00:00.00 iso.3.6.1.2.1.1.9.1.4.2 = Timeticks: (0) 0:00:00.00 iso.3.6.1.2.1.1.9.1.4.3 = Timeticks: (1) 0:00:00.01 iso.3.6.1.2.1.1.9.1.4.4 = Timeticks: (1) 0:00:00.01 iso.3.6.1.2.1.2.1.0 = INTEGER: 4 iso.3.6.1.2.1.2.2.1.1.1 = INTEGER: 1 iso.3.6.1.2.1.2.2.1.1.2 = INTEGER: 2 ....... But it's not possible to add the AP's via Web interface (same credentials): [image: Inline images 1] Any ideas? -- *Ben Maschke* Senior Network Engineer *Tel:* +44 (0) 20 8742 6820 *Shazam* 26-28 Hammersmith Grove, London, W6 7HA Please consider the environment before printing this document Shazam Entertainment Limited is incorporated in England and Wales under company number 3998831 and its registered office is at 26-28 Hammersmith Grove, London W6 7HA.

2 3

MSA 2040
by Walter Idsinga 04 Mar '16

04 Mar '16

Just getting started with Observium. Installation and configuration went smooth. Is their somebody that has successfully configured observium with HP MSA 2040 storage appliance. I do get some info, but only little information is returned. [cid:F888D130-F12C-4AF3-9167-EBA422AADDDF] Thank you, Walter Idsinga ________________________________ This email is intended only for the person to whom it is addressed and/or otherwise authorized personnel. The information contained herein and attached is confidential and the property of Newport. If you are not the intended recipient, please be advised that viewing this message and any attachments, as well as copying, forwarding, printing, and disseminating any information related to this email is prohibited, and that you should not take any action based on the content of this email and/or its attachments. If you received this message in error, please contact the sender and destroy all copies of this email and any attachment. Please note that the views and opinions expressed herein are solely those of the author and do not necessarily reflect those of the company. While antivirus protection tools have been employed, you should check this email and attachments for the presence of viruses. No warranties or assurances are made in relation to the safety and content of this email and attachments. Newport accepts no liability for any damage caused by any virus transmitted by or contained in this email and attachments. No liability is accepted for any consequences arising from this email..

2 1

OSPF alert che
by Sathish.I 04 Mar '16

04 Mar '16

Hello All, Please suggest, how can I add alert checker for OSPF. Regards, Sathish Ippani NSE Team CtrlS is India's First and Asia's largest Tier 4 Datacenter operating across India, USA, and UAE Follow us on <https://www.linkedin.com/company/ctrls-datacenters-ltd> Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/linkedin.jpg <https://twitter.com/CtrlSDC> Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/twitter.jpg <https://www.facebook.com/CtrlSDatacenters> Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/facebook.jpg Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/devider.jpg Description: Description: Description: Description: Description: Description: Ctrls Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/devider.jpg CtrlS Datacenters Ltd 16,Software Units Layout, Madapur (HitechCity), Hyderabad 500081, Telangana, India Mob: +91 9515600544 Tel : +91 (40) 420430700 Fax : +91 (40) 23116055

2 2

How to add a custom alert or web site health check in Observium
by David Gietka - NOAA Federal 04 Mar '16

04 Mar '16

Greetings, My office recently purchased Observium and we really enjoy the server stats on CPU, memory and storage. It appears that I can set up other health checks as well but I was not able to find any examples in the HTML help files. What I would like to do is write a simple shell script that returns one of three values: information, warning, and critical and have Observium act on that value with an alert (on warnings and critical error codes). Does anyone have a brief example they can share? Any assistance would be greatly appreciated. Thanks a lot. Regards, David Gietka NGS Webmaster

2 1

Errors shown when adding devices
by KA PDE 04 Mar '16

04 Mar '16

Hi, After the recent upgrade to CE now a huge list of errors is shown if you add a device through the GUI: Duplicate sysObjectID '.1.3.6.1.4.1.6876.4.1' in definitions for OSes: vmware and vmware! Duplicate sysObjectID '.1.3.6.1.4.1.30803' in definitions for OSes: vyatta and vyatta! Duplicate sysObjectID '.1.3.6.1.4.1.44641' in definitions for OSes: vyos and vyos! Duplicate sysObjectID '.1.3.6.1.4.1.5040.1' in definitions for OSes: wut and wut! Duplicate sysObjectID '.1.3.6.1.4.1.94.1.21.2.1' in definitions for OSes: ipso and ipso! Duplicate sysObjectID '.1.3.6.1.4.1.6983.1' in definitions for OSes: sofaware and sofaware! Duplicate sysObjectID '.1.3.6.1.4.1.7779.1' in definitions for OSes: infoblox and infoblox! Duplicate sysObjectID '.1.3.6.1.4.1.1909.10' in definitions for OSes: infratec-rms and infratec-rms! Duplicate sysObjectID '.1.3.6.1.4.1.16174.1' in definitions for OSes: sensatronics and sensatronics! Duplicate sysObjectID '.1.3.6.1.4.1.2.6.11' in definitions for OSes: ibmi and ibmi! Duplicate sysObjectID '.1.3.6.1.4.1.30155.23.1' in definitions for OSes: openbsd and openbsd! Duplicate sysObjectID '.1.3.6.1.4.1.8072.3.2.12' in definitions for OSes: openbsd and openbsd! Duplicate sysObjectID '.1.3.6.1.4.1.42.2.1.1' in definitions for OSes: solaris and solaris! Duplicate sysObjectID '.1.3.6.1.4.1.7247.1.1' in definitions for OSes: nestos and nestos! Duplicate sysObjectID '.1.3.6.1.4.1.2.3.1.2.1.1.2' in definitions for OSes: aix and aix! Duplicate sysObjectID '.1.3.6.1.4.1.2.3.1.2.1.1.3' in definitions for OSes: aix and aix! Duplicate sysObjectID '.1.3.6.1.4.1.1671' in definitions for OSes: adva and adva! Duplicate sysObjectID '.1.3.6.1.4.1.2544' in definitions for OSes: adva and adva! Duplicate sysObjectID '.1.3.6.1.4.1.12740.17.1' in definitions for OSes: equallogic and equallogic! Duplicate sysObjectID '.1.3.6.1.4.1.12740.12.1.1.0' in definitions for OSes: equallogic and equallogic! Duplicate sysObjectID '.1.3.6.1.4.1.664.1' in definitions for OSes: adtran-aos and adtran-aos! Duplicate sysObjectID '.1.3.6.1.4.1.6486.800.1.1.2.1' in definitions for OSes: aos and aos! Duplicate sysObjectID '.1.3.6.1.4.1.6486.800.1.1.2.2.2' in definitions for OSes: aos and aos! Duplicate sysObjectID '.1.3.6.1.4.1.6486.801.1.1.2.1' in definitions for OSes: aos and aos! Duplicate sysObjectID '.1.3.6.1.4.1.6527.' in definitions for OSes: timos and timos! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.729' in definitions for OSes: acsw and acsw! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.730' in definitions for OSes: acsw and acsw! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.824' in definitions for OSes: acsw and acsw! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1231' in definitions for OSes: acsw and acsw! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1291' in definitions for OSes: acsw and acsw! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.828' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.926' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1069' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1279' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1293' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1295' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1615' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1631' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1645' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.2026' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.14179' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.3607.' in definitions for OSes: cisco-ons and cisco-ons! Duplicate sysObjectID '.1.3.6.1.4.1.9.10.56' in definitions for OSes: cisco-lms and cisco-lms! Duplicate sysObjectID '.1.3.6.1.4.1.29671.1' in definitions for OSes: meraki and meraki! Duplicate sysObjectID '.1.3.6.1.4.1.29671.2.' in definitions for OSes: meraki and meraki! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1512' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1513' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1514' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1515' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1516' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1682' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1683' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1684' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1685' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1864' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1931' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.2178' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.2179' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.2180' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.6.1.80.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.9.6.1.81.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.9.6.1.82.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.9.6.1.83.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.9.6.1.85.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.9.6.1.87.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.9.6.1.88.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.9.6.1.89.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.9.6.1.11.82.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.3955.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.2011.1.' in definitions for OSes: vrp and vrp! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.' in definitions for OSes: vrp and vrp! Duplicate sysObjectID '.1.3.6.1.4.1.2011.6.' in definitions for OSes: vrp and vrp! Duplicate sysObjectID '.1.3.6.1.4.1.2011.10.' in definitions for OSes: vrp and vrp! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.159' in definitions for OSes: huawei-vsp and huawei-vsp! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.122' in definitions for OSes: huawei-vsp and huawei-vsp! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.125' in definitions for OSes: huawei-vsp and huawei-vsp! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.109' in definitions for OSes: huawei-ias and huawei-ias! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.115' in definitions for OSes: huawei-ias and huawei-ias! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.128' in definitions for OSes: huawei-ias and huawei-ias! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.132' in definitions for OSes: huawei-ias and huawei-ias! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.133' in definitions for OSes: huawei-ias and huawei-ias! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.134' in definitions for OSes: huawei-ias and huawei-ias! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.167' in definitions for OSes: huawei-ias and huawei-ias! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.169' in definitions for OSes: huawei-ias and huawei-ias! Duplicate sysObjectID '.1.3.6.1.4.1.24062.2.1' in definitions for OSes: korenix-jetnet and korenix-jetnet! Duplicate sysObjectID '.1.3.6.1.4.1.24062.2.2' in definitions for OSes: korenix-jetnet and korenix-jetnet! Duplicate sysObjectID '.1.3.6.1.4.1.24062.2.3' in definitions for OSes: korenix-jetnet and korenix-jetnet! Duplicate sysObjectID '.1.3.6.1.4.1.2636' in definitions for OSes: junos and junos! Duplicate sysObjectID '.1.3.6.1.4.1.4874' in definitions for OSes: junose and junose! Duplicate sysObjectID '.1.3.6.1.4.1.8239.1.2.9' in definitions for OSes: jwos and jwos! Duplicate sysObjectID '.1.3.6.1.4.1.674.3224.1' in definitions for OSes: screenos and screenos! Duplicate sysObjectID '.1.3.6.1.4.1.3224' in definitions for OSes: screenos and screenos! Duplicate sysObjectID '.1.3.6.1.4.1.12532' in definitions for OSes: juniperive and juniperive! Duplicate sysObjectID '.1.3.6.1.4.1.12356.15' in definitions for OSes: fortigate and fortigate! Duplicate sysObjectID '.1.3.6.1.4.1.12356.101.1' in definitions for OSes: fortigate and fortigate! Duplicate sysObjectID '.1.3.6.1.4.1.18070.2.2' in definitions for OSes: bti7000 and bti7000! Duplicate sysObjectID '.1.3.6.1.4.1.6141.1' in definitions for OSes: ciena and ciena! Duplicate sysObjectID '.1.3.6.1.4.1.14988' in definitions for OSes: routeros and routeros! Duplicate sysObjectID '.1.3.6.1.4.1.1991.1.1' in definitions for OSes: ironware and ironware! Duplicate sysObjectID '.1.3.6.1.4.1.1991.1.3' in definitions for OSes: ironware and ironware! Duplicate sysObjectID '.1.3.6.1.4.1.1991.1.5' in definitions for OSes: ironware and ironware! Duplicate sysObjectID '.1.3.6.1.4.1.1991.1.16' in definitions for OSes: ironware and ironware! Duplicate sysObjectID '.1.3.6.1.4.1.1991.1.6' in definitions for OSes: ironware-ap and ironware-ap! Duplicate sysObjectID '.1.3.6.1.4.1.1991.1.15' in definitions for OSes: ironware-ap and ironware-ap! Duplicate sysObjectID '.1.3.6.1.4.1.1588.2.2' in definitions for OSes: nos and nos! Duplicate sysObjectID '.1.3.6.1.4.1.5624.2.1.' in definitions for OSes: enterasys and enterasys! Duplicate sysObjectID '.1.3.6.1.4.1.5624.2.2.' in definitions for OSes: enterasys and enterasys! Duplicate sysObjectID '.1.3.6.1.4.1.4329.15.1.1' in definitions for OSes: enterasys-wl and enterasys-wl! Duplicate sysObjectID '.1.3.6.1.4.1.2334.' in definitions for OSes: packetshaper and packetshaper! Duplicate sysObjectID '.1.3.6.1.4.1.3417.2.11' in definitions for OSes: proxysg and proxysg! Duplicate sysObjectID '.1.3.6.1.4.1.3417.1.1' in definitions for OSes: proxysg and proxysg! Duplicate sysObjectID '.1.3.6.1.4.1.1795' in definitions for OSes: zhonedslam and zhonedslam! Duplicate sysObjectID '.1.3.6.1.4.1.22610.1.3' in definitions for OSes: a10-ax and a10-ax! Duplicate sysObjectID '.1.3.6.1.4.1.45.3' in definitions for OSes: avaya-ers and avaya-ers! Duplicate sysObjectID '.1.3.6.1.4.1.30065.1.3011.7124' in definitions for OSes: arista_eos and arista_eos! Duplicate sysObjectID '.1.3.6.1.4.1.6321' in definitions for OSes: calix and calix! Duplicate sysObjectID '.1.3.6.1.4.1.5951.1' in definitions for OSes: netscaler and netscaler! Duplicate sysObjectID '.1.3.6.1.4.1.3375.2.1.3.4.' in definitions for OSes: f5 and f5! Duplicate sysObjectID '.1.3.6.1.4.1.32050' in definitions for OSes: sitemonitor and sitemonitor! Duplicate sysObjectID '.1.3.6.1.4.1.161.19.250.256' in definitions for OSes: canopy and canopy! Duplicate sysObjectID '.1.3.6.1.4.1.11898.2.4.9' in definitions for OSes: proxim and proxim! Duplicate sysObjectID '.1.3.6.1.4.1.25053.3.1.4' in definitions for OSes: ruckus-zf and ruckus-zf! Duplicate sysObjectID '.1.3.6.1.4.1.25053.3.1.5' in definitions for OSes: ruckus-zd and ruckus-zd! Duplicate sysObjectID '.1.3.6.1.4.1.5454.1.60' in definitions for OSes: trango-apex and trango-apex! Duplicate sysObjectID '.1.3.6.1.4.1.6027.1.1' in definitions for OSes: ftos and ftos! Duplicate sysObjectID '.1.3.6.1.4.1.6027.1.2' in definitions for OSes: ftos and ftos! Duplicate sysObjectID '.1.3.6.1.4.1.6027.1.3' in definitions for OSes: ftos and ftos! Duplicate sysObjectID '.1.3.6.1.4.1.6027.1.4' in definitions for OSes: ftos and ftos! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3042' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3044' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3045' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3046' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3053' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3054' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3055' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3056' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3057' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3058' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3059' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3060' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3061' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3006' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3007' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3008' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3009' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3010' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3011' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3012' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3013' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3014' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3015' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3022' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3023' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3024' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3025' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3026' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3027' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3034' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3035' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3036' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3037' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3038' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3039' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3040' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3041' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3052' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3000' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3003' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3004' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3005' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3016' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3017' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3018' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3019' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3020' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3021' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3028' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3029' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3030' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3031' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3032' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3033' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10893.2.102' in definitions for OSes: powervault and powervault! Duplicate sysObjectID '.1.3.6.1.4.1.674.10892.2' in definitions for OSes: drac and drac! Duplicate sysObjectID '.1.3.6.1.4.1.674.10892.5' in definitions for OSes: drac and drac! Duplicate sysObjectID '.1.3.6.1.4.1.8741.1' in definitions for OSes: sonicwall and sonicwall! Duplicate sysObjectID '.1.3.6.1.4.1.8741.3' in definitions for OSes: sonicwall and sonicwall! Duplicate sysObjectID '.1.3.6.1.4.1.8741.4' in definitions for OSes: sonicwall and sonicwall! Duplicate sysObjectID '.1.3.6.1.4.1.8741.5' in definitions for OSes: sonicwall and sonicwall! Duplicate sysObjectID '.1.3.6.1.4.1.8741.7' in definitions for OSes: sonicwall and sonicwall! Duplicate sysObjectID '.1.3.6.1.4.1.8741.6' in definitions for OSes: sonicwall and sonicwall-ssl! Duplicate sysObjectID '.1.3.6.1.4.1.9694' in definitions for OSes: arbos and arbos! Duplicate sysObjectID '.1.3.6.1.4.1.15397.2' in definitions for OSes: plos and plos! Duplicate sysObjectID '.1.3.6.1.4.1.33049' in definitions for OSes: mlnx-os and mlnx-os! Duplicate sysObjectID '.1.3.6.1.4.1.304.2.2.' in definitions for OSes: netopia and netopia! Duplicate sysObjectID '.1.3.6.1.4.1.25651.1.2' in definitions for OSes: exalt and exalt! Duplicate sysObjectID '.1.3.6.1.4.1.12394.4.1.' in definitions for OSes: breeze and breeze! Duplicate sysObjectID '.1.3.6.1.4.1.12394.1.' in definitions for OSes: breezemax and breezemax! Duplicate sysObjectID '.1.3.6.1.4.1.171.10.37' in definitions for OSes: dlinkap and dlinkap! Duplicate sysObjectID '.1.3.6.1.4.1.171.10.33' in definitions for OSes: dlinkvoip and dlinkvoip! Duplicate sysObjectID '.1.3.6.1.4.1.171.11.10.1' in definitions for OSes: dlinkdpr and dlinkdpr! Duplicate sysObjectID '.1.3.6.1.4.1.171.10.' in definitions for OSes: dlink and dlink! Duplicate sysObjectID '.1.3.6.1.4.1.11863.1.1.2' in definitions for OSes: tplinkap and tplinkap! Duplicate sysObjectID '.1.3.6.1.4.1.11863' in definitions for OSes: tplink and tplink! Duplicate sysObjectID '.1.3.6.1.4.1.6050.5' in definitions for OSes: gamatronicups and gamatronicups! Duplicate sysObjectID '.1.3.6.1.4.1.534' in definitions for OSes: powerware and powerware! Duplicate sysObjectID '.1.3.6.1.4.1.2254.2.4' in definitions for OSes: deltaups and deltaups! Duplicate sysObjectID '.1.3.6.1.4.1.476.1.42' in definitions for OSes: liebert and liebert! Duplicate sysObjectID '.1.3.6.1.4.1.2606.7' in definitions for OSes: rittalcmc3 and rittalcmc3! Duplicate sysObjectID '.1.3.6.1.4.1.14125.100.1.3' in definitions for OSes: engenius and engenius! Duplicate sysObjectID '.1.3.6.1.4.1.14125.101.1.3' in definitions for OSes: engenius and engenius! Duplicate sysObjectID '.1.3.6.1.4.1.311.1.1.3' in definitions for OSes: windows and windows! Duplicate sysObjectID '.1.3.6.1.4.1.26543.1.7.4' in definitions for OSes: ibmnos and ibmnos! Duplicate sysObjectID '.1.3.6.1.4.1.26543.1.7.6' in definitions for OSes: ibmnos and ibmnos! Duplicate sysObjectID '.1.3.6.1.4.1.789.2.' in definitions for OSes: netapp and netapp! Duplicate sysObjectID '.1.3.6.1.4.1.4115.1.8.1' in definitions for OSes: arris-d5 and arris-d5! Duplicate sysObjectID '.1.3.6.1.4.1.4115.1.4.3' in definitions for OSes: arris-c3 and arris-c3! Duplicate sysObjectID '.1.3.6.1.4.1.11.2.3.7.11.' in definitions for OSes: procurve and procurve! Duplicate sysObjectID '.1.3.6.1.4.1.11.2.3.7.8.' in definitions for OSes: procurve and procurve! Duplicate sysObjectID '.1.3.6.1.4.1.11.2.14.11.7' in definitions for OSes: procurve and procurve! Duplicate sysObjectID '.1.3.6.1.4.1.11.2.14.11.6' in definitions for OSes: procurve-ap and procurve-ap! Duplicate sysObjectID '.1.3.6.1.4.1.11.2.3.7.11.33' in definitions for OSes: hpvc and hpvc! Duplicate sysObjectID '.1.3.6.1.4.1.11.5.7.5.1' in definitions for OSes: hpvc and hpvc! Duplicate sysObjectID '.1.3.6.1.4.1.11.2.3.2' in definitions for OSes: hpux and hpux! Duplicate sysObjectID '.1.3.6.1.4.1.11.2.51' in definitions for OSes: hpstorage and hpstorage! Duplicate sysObjectID '.1.3.6.1.4.1.11.5.7.1.2' in definitions for OSes: hpilo and hpilo! Duplicate sysObjectID '.1.3.6.1.4.1.11.5.7.3.2' in definitions for OSes: hpilo and hpilo! Duplicate sysObjectID '.1.3.6.1.4.1.232.9.4.10' in definitions for OSes: hpilo and hpilo! Duplicate sysObjectID '.1.3.6.1.4.1.43' in definitions for OSes: 3com and 3com! Duplicate sysObjectID '.1.3.6.1.4.1.25506.1.' in definitions for OSes: h3c and h3c! Duplicate sysObjectID '.1.3.6.1.4.1.25506' in definitions for OSes: hh3c and hh3c! Duplicate sysObjectID '.1.3.6.1.4.1.207.1.4.125' in definitions for OSes: allied-radlan and allied-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.207.1.4.126' in definitions for OSes: allied-radlan and allied-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.5468.1' in definitions for OSes: actelis and actelis! Duplicate sysObjectID '.1.3.6.1.4.1.3181.10.3' in definitions for OSes: microsens and microsens! Duplicate sysObjectID '.1.3.6.1.4.1.705.1' in definitions for OSes: mgeups and mgeups! Duplicate sysObjectID '.1.3.6.1.4.1.705.2' in definitions for OSes: mgepdu and mgepdu! Duplicate sysObjectID '.1.3.6.1.4.1.318' in definitions for OSes: apc and apc! Duplicate sysObjectID '.1.3.6.1.4.1.29640.1.2.4' in definitions for OSes: oec and oec! Duplicate sysObjectID '.1.3.6.1.4.1.5528' in definitions for OSes: netbotz and netbotz! Duplicate sysObjectID '.1.3.6.1.4.1.18928.1' in definitions for OSes: areca and areca! Duplicate sysObjectID '.1.3.6.1.4.1.5491.6' in definitions for OSes: netmanplus and netmanplus! Duplicate sysObjectID '.1.3.6.1.4.1.2468.1.4.2.1' in definitions for OSes: ipoman and ipoman! Duplicate sysObjectID '.1.3.6.1.4.1.17373' in definitions for OSes: wxgoos and wxgoos! Duplicate sysObjectID '.1.3.6.1.4.1.674.10898.10.51' in definitions for OSes: dell-laser and dell-laser! Duplicate sysObjectID '.1.3.6.1.4.1.11.1' in definitions for OSes: jetdirect and jetdirect! Duplicate sysObjectID '.1.3.6.1.4.1.2001.1' in definitions for OSes: okilan and okilan! Duplicate sysObjectID '.1.3.6.1.4.1.1129.2.3.' in definitions for OSes: estudio and estudio! Duplicate sysObjectID '.1.3.6.1.4.1.1718.3' in definitions for OSes: sentry3 and sentry3! Duplicate sysObjectID '.1.3.6.1.4.1.28507.1' in definitions for OSes: gude-epc and gude-epc! Duplicate sysObjectID '.1.3.6.1.4.1.28507.6' in definitions for OSes: gude-epc and gude-epc! Duplicate sysObjectID '.1.3.6.1.4.1.28507.23' in definitions for OSes: gude-pdu and gude-pdu! Duplicate sysObjectID '.1.3.6.1.4.1.28507.27' in definitions for OSes: gude-pdu and gude-pdu! Duplicate sysObjectID '.1.3.6.1.4.1.28507.35' in definitions for OSes: gude-pdu and gude-pdu! Duplicate sysObjectID '.1.3.6.1.4.1.21239.5' in definitions for OSes: geist-climate and geist-climate! Duplicate sysObjectID '.1.3.6.1.4.1.13742' in definitions for OSes: raritan and raritan! Duplicate sysObjectID '.1.3.6.1.4.1.629' in definitions for OSes: mrvnbs and mrvnbs! Duplicate sysObjectID '.1.3.6.1.4.1.850' in definitions for OSes: poweralert and poweralert! Duplicate sysObjectID '.1.3.6.1.4.1.388' in definitions for OSes: symbol and symbol! Duplicate sysObjectID '.1.3.6.1.4.1.25461.2' in definitions for OSes: panos and panos! Duplicate sysObjectID '.1.3.6.1.4.1.6486.800.1.1.2.2' in definitions for OSes: arubaos and arubaos! Duplicate sysObjectID '.1.3.6.1.4.1.14823' in definitions for OSes: arubaos and arubaos! Duplicate sysObjectID '.1.3.6.1.4.1.14525.3.3' in definitions for OSes: trapeze and trapeze! Duplicate sysObjectID '.1.3.6.1.4.1.14525.3.1' in definitions for OSes: trapeze and trapeze! Duplicate sysObjectID '.1.3.6.1.4.1.2356.11' in definitions for OSes: lcos and lcos! Duplicate sysObjectID '.1.3.6.1.4.1.2356.600.3.55' in definitions for OSes: lancom-l54-dual and lancom-l54-dual! Duplicate sysObjectID '.1.3.6.1.4.1.2356.600.6.310' in definitions for OSes: lancom-l310 and lancom-l310! Duplicate sysObjectID '.1.3.6.1.4.1.2356.600.4.54' in definitions for OSes: lancom-c54g and lancom-c54g! Duplicate sysObjectID '.1.3.6.1.4.1.7367' in definitions for OSes: draytek and draytek! Duplicate sysObjectID '.1.3.6.1.4.1.10704' in definitions for OSes: barracudangfw and barracudangfw! Duplicate sysObjectID '.1.3.6.1.4.1.5003' in definitions for OSes: audiocodes and audiocodes! Duplicate sysObjectID '.1.3.6.1.4.1.5329' in definitions for OSes: shoretelos and shoretelos! Duplicate sysObjectID '.1.3.6.1.4.1.1027.1.2.3' in definitions for OSes: mcd and mcd! Duplicate sysObjectID '.1.3.6.1.4.1.9148.1' in definitions for OSes: acme and acme! Duplicate sysObjectID '.1.3.6.1.4.1.21796.3.3' in definitions for OSes: poseidon and poseidon! Duplicate sysObjectID '.1.3.6.1.4.1.21796.4.1' in definitions for OSes: hwg-ste and hwg-ste! Duplicate sysObjectID '.1.3.6.1.4.1.21296' in definitions for OSes: iqnos and iqnos! Duplicate sysObjectID '.1.3.6.1.4.1.89.1.1.62.16' in definitions for OSes: radware and radware! Duplicate sysObjectID '.1.3.6.1.4.1.35251.2.3' in definitions for OSes: wipg and wipg! Duplicate sysObjectID '.1.3.6.1.4.1.1768.100.4.' in definitions for OSes: smartware and smartware! Duplicate sysObjectID '.1.3.6.1.4.1.17163.1.1' in definitions for OSes: steelhead and steelhead! Duplicate sysObjectID '.1.3.6.1.4.1.25049.1.' in definitions for OSes: opengear and opengear! Duplicate sysObjectID '.1.3.6.1.4.1.25049.16.' in definitions for OSes: opengear and opengear! Duplicate sysObjectID '.1.3.6.1.4.1.30826.1' in definitions for OSes: smartos and smartos! Duplicate sysObjectID '.1.3.6.1.4.1.38191.6.2.2' in definitions for OSes: lg-printer and lg! Duplicate sysObjectID '.1.3.6.1.4.1.1248.1.1.2' in definitions for OSes: epson-printer and epson! Duplicate sysObjectID '.1.3.6.1.4.1.1248.1.2.1' in definitions for OSes: epson-printer and epson! Duplicate sysObjectID '.1.3.6.1.4.1.253.8.62.1.' in definitions for OSes: xerox-printer and xerox! Duplicate sysObjectID '.1.3.6.1.4.1.297.1.11.93.1.' in definitions for OSes: fuji-xerox-printer and fuji-xerox! Duplicate sysObjectID '.1.3.6.1.4.1.1602.4.2' in definitions for OSes: canon-printer and canon! Duplicate sysObjectID '.1.3.6.1.4.1.1602.4.7' in definitions for OSes: canon-printer and canon! Duplicate sysObjectID '.1.3.6.1.4.1.2385.3.1.' in definitions for OSes: sharp-printer and sharp! Duplicate sysObjectID '.1.3.6.1.4.1.3369.1.1.2.40' in definitions for OSes: sharp-printer and sharp! Duplicate sysObjectID '.1.3.6.1.4.1.2435.2.3.9.1' in definitions for OSes: brother-printer and brother! Duplicate sysObjectID '.1.3.6.1.4.1.18334.1.1.1.2.1' in definitions for OSes: konica-printer and konica! Duplicate sysObjectID '.1.3.6.1.4.1.2590.1.1.1.2.1' in definitions for OSes: konica-printer and konica! Duplicate sysObjectID '.1.3.6.1.4.1.258.406.2' in definitions for OSes: panasonic-printer and panasonic! Duplicate sysObjectID '.1.3.6.1.4.1.258.406.3' in definitions for OSes: panasonic-printer and panasonic! Does anybody know how to get rid of this? Regards, Pau

2 1

RANCID integration in Observium on a RHEL like OS
by Shkelzen Rugovac 04 Mar '16

04 Mar '16

Hi, I'm trying to integrate RANCID in an Observium server installed on top of a Scientific Linux 6.6. So far I found this documentation for ubuntu: http://www.observium.org/docs/rancid/ I somehow "replaced by" what was necessary such as apt-get by yum and www-data by apache. Though I'm not able to see the "Config" tab in my observium web pages. Am I missing some specific steps for RHEL or it is just not meant to work under RHEL? Many thanks in advance! Cheers, Shkelzen

2 1

SVN Up problem
by Svensson Fredrik A 03 Mar '16

03 Mar '16

I just tried to do an upgrade, it failed on this: A mibs/pbn/NMS-TC.MIB svn: Failed to add file 'mibs/NS-ROOT-MIB': an unversioned file of the same name already exists What can I do about this? Regards Fredrik

2 2

How to add a custom alert or web site health check in Observium
by David Gietka - NOAA Federal 03 Mar '16

03 Mar '16

Greetings, My office recently purchased Observium and we really enjoy the server stats on CPU, memory and storage. It appears that I can set up other health checks as well but I was not able to find any examples in the HTML help files. What I would like to do is write a simple shell script that returns one of three values: information, warning, and critical and have Observium act on that value with an alert (on warnings and critical error codes). Does anyone have a brief example they can share? Any assistance would be greatly appreciated. Thanks a lot. Regards, David Gietka NGS Webmaster

1 0

Problem with rrdtool graphs
by Idriss SOIDIKI 02 Mar '16

02 Mar '16

Hello, I installed Observium with the new version and I meet a problem with the creation of the graphs. Nevertheless when I launch the poller he seems to work correctly. Did you meet similar problems? Cordially --

2 2

IPMI fan speed as percent
by Louis Bailleul 02 Mar '16

02 Mar '16

Hi all, I have some devices for which the fan speed reported over IPMI is in percent. As the current ipmi_unit is “RPM” they were ignored. Thinking that it could be an easy tweak I just added a definition for percent in includes/definitions/sensors.inc.php $config['ipmi_unit']['percent'] = 'fanspeed'; This makes the detection and polling work but the graphs are messed up as they expect RPMs (kind of make sense eh). I believe that the fan sensors code is not designed to accommodate different units. So I come for advice on how to tackle this one. Is there a sensors that already work with percent ? Below is the output of the ipmi sensors. Yes it shit, and you need to thanks HP for that (especially things like the temperature limit for CPU or reporting the nominal Wattage of a PSU instead of the power consumption …) UID Light | 0x0 | discrete | 0x0180| na | na | na | na | na | na Sys. Health LED | 0x0 | discrete | 0x0180| na | na | na | na | na | na 01-Front Ambient | 24.000 | degrees C | ok | na | na | na | na | 42.000 | 46.000 02-CPU 1 | 59.000 | degrees C | ok | na | na | na | na | -116.000 | na 03-CPU 2 | 53.000 | degrees C | ok | na | na | na | na | -116.000 | na 04-P1 DIMM 1-4 | 64.000 | degrees C | ok | na | na | na | na | 87.000 | na 05-P1 DIMM 5-8 | 69.000 | degrees C | ok | na | na | na | na | 87.000 | na 06-P2 DIMM 1-4 | 58.000 | degrees C | ok | na | na | na | na | 87.000 | na 07-P2 DIMM 5-8 | 57.000 | degrees C | ok | na | na | na | na | 87.000 | na 08-HD Max | na | | na | na | na | na | na | 60.000 | na 09-HD Zone | 24.000 | degrees C | ok | na | na | na | na | 80.000 | na 10-Chipset | 81.000 | degrees C | ok | na | na | na | na | 105.000 | na 11-VR P1 | 80.000 | degrees C | ok | na | na | na | na | 115.000 | 120.000 12-VR P2 | 55.000 | degrees C | ok | na | na | na | na | 115.000 | 120.000 13-VR P1 MEM1 | 66.000 | degrees C | ok | na | na | na | na | 115.000 | 120.000 14-VR P1 MEM2 | 71.000 | degrees C | ok | na | na | na | na | 115.000 | 120.000 15-VR P2 Mem1 | 43.000 | degrees C | ok | na | na | na | na | 115.000 | 120.000 16-VR P2 Mem2 | 69.000 | degrees C | ok | na | na | na | na | 115.000 | 120.000 17-LOM | na | | na | na | na | na | na | 100.000 | na 18-PCI 1 | na | | na | na | na | na | na | 100.000 | na 19-PCI 2 | na | | na | na | na | na | na | 100.000 | na 20-PCI 3 | na | | na | na | na | na | na | 100.000 | na 21-LOM Card | na | | na | na | na | na | na | 100.000 | na 22-PCI 1 Zone | 59.000 | degrees C | ok | na | na | na | na | 70.000 | 75.000 23-LOM Zone | 72.000 | degrees C | ok | na | na | na | na | 75.000 | 80.000 24-Battery Zone | 65.000 | degrees C | ok | na | na | na | na | 75.000 | 80.000 25-PSU Intake | 40.000 | degrees C | ok | na | na | na | na | 80.000 | 85.000 26-Sys Exhaust | 64.000 | degrees C | ok | na | na | na | na | 80.000 | 85.000 Fan 1 | 67.816 | percent | ok | na | na | na | na | na | na Fan 2 | 67.816 | percent | ok | na | na | na | na | na | na Power Supply 1 | 1275 | Watts | ok | na | na | na | na | na | na Power Supply 2 | 1275 | Watts | ok | na | na | na | na | na | na Memory | 0x0 | discrete | 0x4080| na | na | na | na | na | na Best regards, Louis [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/PGS_LOGO_RGB_42x53px.jpg]<http://www.pgs.com> Louis Bailleul Computer Systems Engineer Imaging & Engineering | Imaging Telephone: +44 1932 376000 Direct: +44 1932 376842 VOIP: 74416842 Mobile: +44 7786 525307 Email: louis.bailleul(a)pgs.com<mailto:Louis.Bailleul@pgs.com> A Clearer Image | www.pgs.com<http://www.pgs.com> [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/150731-ColourWave-660x14…] Address: 4 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, United Kingdom This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

2 6

Problem with rrdtool graphs
by Idriss SOIDIKI 01 Mar '16

01 Mar '16

Hello, i run commands observium]# ./discovery.php -h all observium]# ./poller.php -h all I did not go up the information and my graphs are not displayed. What I can do ? --

2 1

big db.log
by Jose Colin 29 Feb '16

29 Feb '16

Hello Guys Recently i report that i had a lot of php processes running on the server and this consume the whole resources of the server so i checked the logs and notice that i have a 3.5 GB db.log file and in there is the next info: t row 1), Query: INSERT INTO `sensors-state` (`sensor_id`,`sensor_value`,`sensor_event`,`sensor_status`,`sensor_last_change`,`sensor_polled`) VALUES ('278','70','ok','','','1456155044') [2016/02/22 15:30:45 +0000] poller.php(9150): Failed dbQuery (#1364 - Field 'ifInUcastPkts_delta' doesn't have a default value), Query: INSERT INTO `ports-state` (`poll_time`,`poll_period`,`ifInOctets`,`ifOutOctets`,`ifInErrors`,`ifOutErrors`,`ifInUcastPkts`,`ifOutUcastPkts`,`ifInOctets_perc`,`ifOutOctets_perc`,`ifOctets_rate`,`ifUcastPkts_rate`,`ifErrors_rate`,`port_id`) VALUES ('1456155045','1456155045','15446864133','15446864133','0','0','66588490','66588490','0','0','0','0','0','524') [2016/02/22 15:30:45 +0000] poller.php(9150): Failed dbQuery (#1364 - Field 'ifInUcastPkts_delta' doesn't have a default value), Query: INSERT INTO `ports-state` (`poll_time`,`poll_period`,`ifInOctets`,`ifOutOctets`,`ifInErrors`,`ifOutErrors`,`ifInUcastPkts`,`ifOutUcastPkts`,`ifInOctets_perc`,`ifOutOctets_perc`,`ifOctets_rate`,`ifUcastPkts_rate`,`ifErrors_rate`,`port_id`) VALUES ('1456155045','1456155045','64446811076','175584922424','0','0','339891989','309672599','0','0','0','0','0','525') [2016/02/22 15:30:46 +0000] poller.php(6813): Failed dbQuery (#1364 - Field 'mempool_polled' doesn't have a default value), Query: INSERT INTO `mempools-state` (`mempool_id`) VALUES ('91') [2016/02/22 15:30:46 +0000] poller.php(6813): Failed dbQuery (#1364 - Field 'mempool_polled' doesn't have a default value), Query: INSERT INTO `mempools-state` (`mempool_id`) VALUES ('92') [2016/02/22 15:30:46 +0000] poller.php(6813): Failed dbQuery (#1364 - Field 'mempool_polled' doesn't have a default value), Query: this is the reason why i have many poller pids on the server. please can you guide to fix this issue?. thanks in advice. José.

2 2

Device showing interface error cleared long ago
by KA PDE 29 Feb '16

29 Feb '16

Hi, I have a device which is always showing an interface error which was previous to the Observium installation. I cleared the error on the switch and it did not reproduce. However Observium is showing it every day I check. I've tried to delete the device and adding it back and it show the error again. After upgrading to the latests CE it is the same. Maybe this has persisted in the DB, I don't know... Does anyone has any hint for this behaviour? Thanks in advance and best regards, Pau

1 0

Port Customer/Transit/peering
by chott＠praha1.net 28 Feb '16

28 Feb '16

Hello team, we are try set Description of port for recognize usage of port like this notes http://observium.org/w/Interface_Description_Parsing We have lot of port description starting "cust" and "transit" but Observium every time after go to Ports/Customers write "None found." Thank you for help Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

5 11

DOM optic sensor graphs always rounded to 0W
by Sandy Breeze 26 Feb '16

26 Feb '16

Hi, Currently running: 0.16.1.7533 (26th January 2016) We’ve noticed the DOM optic power sensor data to be graphed at 0W all the time. Noticing the ‘value’ figure is correct on the optic’s power status page, we subsequently found all data in the RRD to be correct. eg:  <row><v>6.1840000000e-04</v></row>  <row><v>6.1300000000e-04</v></row>  <row><v>6.1435000000e-04</v></row> It just seems the rrdtool graph function is not rendering this sensor data with anything useful. The graph is being generated with something like this: rrdtool graph /tmp/FLjPO7rtfRJQOfGn.png -Y --lower-limit 0 --alt-autoscale-max --start 1456347228 --end 1456433628 --width 1152 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DroidSansMono,DejaVuSansMono' --font AXIS:7:'DroidSansMono,DejaVuSansMono' --font-render-mode normal -E -A COMMENT:' Last Max\n' DEF:sensor=/srv/www/iss/observium/rrd/t40-ar14/sensor-power-cisco-entity-sensor-58513400.rrd:sensor:AVERAGE DEF:sensor_max=/srv/www/iss/observium/rrd/t40-ar14/sensor-power-cisco-entity-sensor-58513400.rrd:sensor:MAX DEF:sensor_min=/srv/www/iss/observium/rrd/t40-ar14/sensor-power-cisco-entity-sensor-58513400.rrd:sensor:MIN AREA:sensor_max#c5c5c5 AREA:sensor_min#ffffffff LINE1.5:sensor#cc0000:'Transceiver Rx Power -' GPRINT:sensor:LAST:%6.2lfW GPRINT:sensor:MAX:%6.2lfW\\l HRULE:0.0009585#999999::dashes Seeing the data collected is in the order of 10^-4 d.p. small, how can we stop this being rounded to 0 all the time on a the graph? I understand completely this is rrdtool not automatically choosing a very good scale for you, but is there any way to detect these low values and fix them up for the graphs by order of 1000 say? Cheers Sandy

4 6

Subscription Graphs Issue/API
by Josh Hopper 26 Feb '16

26 Feb '16

Well, my graphs do not work. Trying to figure out where I went wrong so I do not have to reinstall from scratch. Any assistance, is highly appreciated. I see this: [image: Inline image 1] Its the same for every device. I'm on Observium 0.16.2.7629 (stable). I thought it might be my config.php so I posted it below. root@svr-observium:/opt/observium# cat config.php <?php ## Check http://www.observium.org/docs/config_options/ for documentation of possible settings // Database config --- This MUST be configured $config['db_extension'] = 'mysqli'; $config['db_host'] = 'localhost'; $config['db_user'] = 'observium'; $config['db_pass'] = 'XXXXXXXX'; $config['db_name'] = 'observium'; // Base directory #$config['install_dir'] = "/opt/observium"; // Default community list to use when adding/discovering $config['snmp']['community'] = array("public"); // Authentication Model $config['auth_mechanism'] = "mysql"; // default, other options: ldap, http-auth, please see documentation for config help // Enable alerter (not available in CE) // $config['poller-wrapper']['alerter'] = TRUE; // Set up a default alerter (email to a single address) $config['email']['default'] = "user@your-domain"; $config['email']['from'] = "Observium <observium@your-domain>"; $config['email']['default_only'] = TRUE; // End config.php ?>

2 2

Creating group with ifInOctets_perc
by Louis Bailleul 26 Feb '16

26 Feb '16

Hi, Seems that I can’t create a group that uses ifInOctets_perc for its entity match ? Is this because of a reason/bug or I am doing it stupidly ? My alert checker is working fine and I was able to create a group with ifOperStatus. They are both in the Mettrics category so I expected them to work the same way. [cid:image001.png@01D170AF.C90F8400] [cid:image002.png@01D170AF.C90F8400] Best regards, Louis [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/PGS_LOGO_RGB_42x53px.jpg]<http://www.pgs.com> Louis Bailleul Computer Systems Engineer Imaging & Engineering | Imaging Telephone: +44 1932 376000 Direct: +44 1932 376842 VOIP: 74416842 Mobile: +44 7786 525307 Email: louis.bailleul(a)pgs.com<mailto:Louis.Bailleul@pgs.com> A Clearer Image | www.pgs.com<http://www.pgs.com> [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/150731-ColourWave-660x14…] Address: 4 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, United Kingdom This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

2 2

Panasas support
by Louis Bailleul 26 Feb '16

26 Feb '16

Hi, I have a few Panasas devices that (not surprisingly) Observium doesn’t handle very well. It basically only get the uptime out of it. The devices are similar to this : http://www.panasas.com/products/activestor-16-18 I have attached debug discovery, poller and snmpwalk of the top tree and enterprise parts. I also have attached the mibs from the device (retrieved from the device itself) and a logo (retrieved from http://www.panasas.com/news/press-room ) It looks like there is very little in the standard places and every interesting thing has been shoved into the enterprise tree. Do you think it is possible to add support for these devices ? Best regards, Louis [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/PGS_LOGO_RGB_42x53px.jpg]<http://www.pgs.com> Louis Bailleul Computer Systems Engineer Imaging & Engineering | Imaging Telephone: +44 1932 376000 Direct: +44 1932 376842 VOIP: 74416842 Mobile: +44 7786 525307 Email: louis.bailleul(a)pgs.com<mailto:Louis.Bailleul@pgs.com> A Clearer Image | www.pgs.com<http://www.pgs.com> [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/150731-ColourWave-660x14…] Address: 4 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, United Kingdom This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

2 2

observium-rancid mail configuration
by Sathish.I 26 Feb '16

26 Feb '16

Hi All, I am very new to observium, I have successfully integrated rancid with Observium, taking backup ups. However, I am unable to receive the mail when backup was tacken. Can anyone share the config template to integrate rancid and mail configuration for rancid. Thanks in advance. Regards, Sathish Ippani NSE Team CtrlS is India's First and Asia's largest Tier 4 Datacenter operating across India, USA, and UAE Follow us on <https://www.linkedin.com/company/ctrls-datacenters-ltd> Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/linkedin.jpg <https://twitter.com/CtrlSDC> Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/twitter.jpg <https://www.facebook.com/CtrlSDatacenters> Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/facebook.jpg Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/devider.jpg Description: Description: Description: Description: Description: Description: Ctrls Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/devider.jpg CtrlS Datacenters Ltd 16,Software Units Layout, Madapur (HitechCity), Hyderabad 500081, Telangana, India Mob: +91 9515600544 Tel : +91 (40) 420430700 Fax : +91 (40) 23116055

2 1

Filtering ports/devices
by Michael 26 Feb '16

26 Feb '16

Does anybody know of a syntax that will allow multiple matches when filtering on device hostnames? I'm specifically on the all ports page. We've smashed two separate networks together and there are different naming conventions in use. When I want to look at only one side of the network, it would be easy if I could match all devices starting with p, s or m-. The hostname field doesn't seem to accept regex, nor does it accept "or" statements. Is there a solution to this? Cheers, Michael

1 0

Alerts based on RRD averages?
by Stephen Fulton 25 Feb '16

25 Feb '16

Hi all, I'm curious if it is possible to create an alert that considers an RRD average? For example, if I want to generate an alert that looks at the average utilization of a port over a 24 hour period, and if the average bit rate or percentage is greater than X, send an alert? I have been working with alerts that trigger based on a percentage, but if the port drops below that mark for even a short period of time (minutes, perhaps even an hour or two), the clock resets. That's proving troublesome. Any suggestions? Thanks, -- Stephen

2 1

HP mfp m527 and mfp m577 printers
by Richard Kuhns 25 Feb '16

25 Feb '16

Greetings, We've just purchased both of these printers. I've started monitoring them with Observium, but all I see under Inventory are the printer itself (hrDevicePrinter) and the printer's hard disk (hrDeviceDiskStorage). Have I missed doing something, or are these printers just not supported? This is by no means urgent. I've never tried to monitor a printer before and I just wanted to see what Observium told me about them. Thanks, - Richard -- Richard Kuhns <rjk(a)wintek.com> Wintek Corporation 427 N 6th Street Lafayette, IN 47901-2211 Main: 765-742-8428 Direct: 765-269-8541

3 3

non-continuous graphs
by Sathish.I 25 Feb '16

25 Feb '16

Hello All, WE have newly installed Observium, we are seeing the graph's in non-continuous pattern as below. Can you guys please check and suggest a solution. Regards, sathish

1 0

Getting "DB schema not installed, first install it." After CE upgrade
by KA PDE 25 Feb '16

25 Feb '16

Hi everyone, Today I've upgraded a CE Observium from 0.15.6 to 0.16.1 and it broke. It only shows DB schema not installed. I've noticed some errors in update-errors.log [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `bgpPeers` ADD INDEX `bgp_cache` (`bgpPeer_id`, `device_id`, `bgpPeerState`, `bgpPeerAdminStatus`, `bgpPeerRemoteAs`); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `ospf_instances` ADD INDEX `ospf_cache` (`device_id`, `ospf_instance_id`, `ospfAdminStat`); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `vrfs` ADD INDEX `vrf_cache` (`vrf_id`, `device_id`, `mplsVpnVrfRouteDistinguisher`); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): ====== Schema update 264 -> 265 ============== [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `alerts_maint` ADD INDEX `maint_cache` (`maint_start`, `maint_end`); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): ====== Schema update 265 -> 266 ============== [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `snmp_errors` DROP INDEX `error_index`; [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `snmp_errors` ADD UNIQUE `error_index` (`device_id`, `error_code`, `snmp_cmd`, `mib`(50), `oid`(100)); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected The strange thing is that I recently upgraded another server with no issues. The only difference is that I added the following config line later as there was an alert in the GUI (and now I'm adding it from start): $config['db_extension'] = 'mysqli'; Any hint will be greatly appreciated. Best regards, Pau

2 2

hey thanks for "Reset Limits" [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 25 Feb '16

25 Feb '16

just found it thanks VM Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine(a)familycourt.gov.au ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

1 0

Possible bug
by Nagy Attila 24 Feb '16

24 Feb '16

Hi all, We are using a customized location rewrite function to split the SNMP location of devices into a human readable and a machine understandable format. We are using the community edition, and on updating to the recent version we were faced with thIS error message: PHP Fatal error: Cannot redeclare custom_rewrite_location() (previously declared in /opt/observium/config.php:87) in /opt/observium/config.php on line 102 This is a common error when a php file is included/required more than once, so I made a workaround by renaming config.php to config.user.php and using require_once() in the original config.php to load these directives (it needs absolute path otherways it cannot find the file). Shouldn't require_once/include_once be used in all the places where referencing config.php? Br, Tylla,

5 10

Observium syslog year -0001
by Jason Vanlandingham 24 Feb '16

24 Feb '16

Lately (Since last CE update, I think) I've been seeing syslog messages for my Cisco router with a date stamp of "-0001-11-30" with text reading just something like "1:1". A little searching reveals that there was a mail list post from July 2014 for the same thing happening with Netgear equipment, but the only way I could see that post was through Google's cached result, and I can't find any replies. Is anyone else getting this? Known issue, perhaps?

1 0

Cisco SB SFP DOM/DDM monitoring
by chott＠praha1.net 24 Feb '16

24 Feb '16

Hello team, today i find OID for SFP monitoring in Cisco SB in this case there is OID and CLI info from CISCO SG300-10 switch and SFP in slot GI9 with DOM support can you add to Observium ? like Catalyst switches? Only in CLI there is mW for Power in SNMPwalk there is dBm but same value dBm is right value for DOM monitoring iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.5 = INTEGER: 47 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.6 = INTEGER: 3211700 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.7 = INTEGER: 6289 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.8 = INTEGER: -6809 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.9 = INTEGER: -9626 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.10 = INTEGER: 0 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.11 = INTEGER: 0 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.12 = INTEGER: 0 Port Temp Voltage Current Output Input LOS [C] [Volt] [mA] Power Power [mWatt] [mWatt] ----------- ------ ------- ------- ------- ------- --- gi1 Copper gi2 Copper gi3 Copper gi4 Copper gi5 Copper gi6 Copper gi7 Copper gi8 Copper gi9 47 3.20 6.28 0.20 0.10 No gi10 N/A N/A N/A N/A N/A N/A Temp - Internally measured transceiver temperature Voltage - Internally measured supply voltage Current - Measured TX bias current Output Power - Measured TX output power in milliWatts Input Power - Measured RX received power in milliWatts LOS - Loss of signal N/A - Not Available, N/S - Not Supported, W - Warning, E - Error Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

4 16

Rancid-Mail configuration
by Sathish.I 23 Feb '16

23 Feb '16

Hi All, I am very new to observium, I have successfully integrated rancid with Observium, taking backup ups. However, I am unable to receive the mail when config difference. Can any share the config template to integrate rancid and mail configuration for configuration changes. Thanks in advance. Regards, sathish

2 1

Correct version not shon after device(raouter) upgradation
by Rakesh Vyas 23 Feb '16

23 Feb '16

Hi, Observium is not showing correct version after router version up gradation. We have to delete and add that device again. Any process to get auto update. Best regards Rakesh Vyas Lead, Network Data Operations Division Network, CORPORATE CENTER Sistema Shyam Teleservices Limited MTS Tower1 Building No. 334, Udyog Vihar Phase IV,Gurgaon MTS +91 913 600 1375 Direct Email: Rakesh.Vyas(a)MTSIndia.in [cid:image001.jpg@01D16E23.17796F00]<http://www.mtsindia.in/> ________________________________ This E-Mail may contain Confidential and/or legally privileged Information and is meant for the intended recipient(s) only. If you have received this e-mail in error and are not the intended recipient/s, Kindly notify the sender and then delete this e-mail immediately from your system. You are also hereby notified that any use, any form of reproduction, dissemination, copying, disclosure, modification, distribution and/or publication of this e-mail, its contents or its attachment/s other than by its intended recipient/s is strictly prohibited and may be unlawful. Internet Communications cannot be guaranteed to be secure or error-free as information could be delayed, intercepted, corrupted, lost, or contain viruses. Sistema Shyam Teleservices Limited does not accept any liability for any errors, omissions, viruses or computer problems experienced by any recipient as a result of this e-mail.

2 1

EIGRP
by Jason Vanlandingham 23 Feb '16

23 Feb '16

I've been running OSPF but am changing to EIGRP. EIGRP isn't showing in the routing section when I look at devices.

13 22

Export/import hosts
by Laszlo Nemeth 23 Feb '16

23 Feb '16

Hello, Because we have a problem with the alerts (if i set up an alert the Observium send an alert in every 5 minutes instead of 1 alert / 24 hour ) i decided to reinstall the Observium (First i installed the 201506(?) CE and updated it to CE 0.16.1.7533) So the question is can i export the hosts and import back after the reinstall procedure? Currently i have more than 50 hosts, so it is faster if i can just do an export/import instead of add all host again…. Thanks Laszlo

1 0

losing device information after adding IP SLA
by Bastiaan Topper 23 Feb '16

23 Feb '16

Hi, We have a few devices in our Observium installation which lost some sensor en memory pools during discovery. See below. It looks like the problem started around 5 days ago. [cid:image004.png@01D16E44.AA924840] It looks like that after enabling a new IP SLA config on a new device, and running a discovery, first the new IP SLA entity appeared. But after waiting a few minutes, the IP SLA and more entities, disappeared. [cid:image005.png@01D16E46.CFB02A50] I attached the discovery debug information for both hosts. How can we get this back to work? Did anything change in the discovery and/or IP SLA around 5 days ago? Thanks and regards, Bastiaan

1 0

Mini-graphs not clickable?
by Jason Vanlandingham 23 Feb '16

23 Feb '16

I did the CE update a few days ago and now the minigraphs in the header of a device's overview aren't clickable anymore. I rather liked having that shortcut.

1 0

Normal Users not getting permissions using Active Directory
by Schrader, Spencer R 23 Feb '16

23 Feb '16

I have included the link at the bottom to where I described the issue which was marked “resolved” and I was pointed here for help. I have the professional version of observium where users are all successfully authenticating, but when normal users log in they can’t see anything. I edited there permissions and allowed them all to see multiple devices(screenshot in link),but they still can’t see anything. Observium recognizes they log in as normal users, but doesn’t let them see any of the other devices they have access to. Global Read, and administrators work fine. I posted my ldap config and a few screenshots in the link. http://jira.observium.org/browse/OBSERVIUM-1684 Thanks for your time! -Spencer

5 8

Dell ESXi v6 hosts RAM not reporting
by Pedrosi, Derek G. 22 Feb '16

22 Feb '16

I have a few host that were recently upgraded from ESXi5.1 to ESXi6.0. After upgrading, Observium no longer is reporting on physical RAM, at all. Host are Dell r810/r720; at time of upgrade their OpenManage was also upgraded to 8.2. The Observium event log for the servers say... "Memory pool removed: mib host-resources-mib, index 27, descr Real Memory" So I see it was removed, but why? I did an smptwalk on the box "snmpwalk -v2c -c XXXXX 10.X.X.X .1.3.6.1.2.1.25.2.2.0"--> HOST-RESOURCES-MIB::hrMemorySize.0 = INTEGER: 536857360 Kbytes It looks like the value it still there. Can anyone shed some light on this? Thanx in advance, derek

1 0

Alert Checker for Smokeping
by Lyndon Labuschagne 22 Feb '16

22 Feb '16

Hi All does anyone know if you can setup an alert checker for smokeping, say at 20ms etc send an email alert? Still trying to get my head around some of the alerting options, Is there a global list off all the Conditions somewhere?

3 4

Non-Critical - Device Allocation
by Cameron Murray 22 Feb '16

22 Feb '16

Guys, Thought you might want to add a definition for the Dell Networking X4012 10Gb Siwtch. Currently appears as a Generic Device. [cid:image001.png@01D16D4B.6B18B090] Regards, Cameron Murray Remote Support Engineer How am I doing? Please click here<http://www.techpath.com.au/contact-us/feedback/> to rate my work. [cid:image002.png@01D16D4B.6B18B090]<http://www.techpath.com.au/> P 1300 033 300 F 07 3809 3999 E cameron(a)techpath.com.au www.techpath.com.au<http://www.techpath.com.au> Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 [Facebook]<http://www.facebook.com/techpathau> [Twitter]<http://twitter.com/techpathau> [LinkedIn]<http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd.

2 1

Problens BGP peers
by Layon - NOC ISPNETWORK 20 Feb '16

20 Feb '16

Hello currently use to monitor my obsrvium BGP sessions with Cisco routers is the best monitoring system that already utilized it is exelente , I have some routers mikrotik and would like to know how to monitor sessions BGP , OSPF routers MikroTik could help me Thank you IT Manager Layon Santos Cota

2 2

Re: [Observium] mysqld: The table 'ports_cbqos' is full - solved, probably
by Fältman, Mikael 20 Feb '16

20 Feb '16

Hi again. Increased innodb_buffer_pool_size and restarted mysqld - solved the problem. Buffer_pool_size has probably nothing to do with this issue but I was also getting warnings about buffer pool is occupied by InnoDB: lock heaps or the adaptive hash index. It is a good thing to sometimes keep a peek into /var/log/mysqld.log file (or where ever it is stored). BR Mikael From: observium [mailto:observium-bounces@observium.org] On Behalf Of Fältman, Mikael Sent: den 18 februari 2016 10:27 To: Observium Network Observation System Subject: [Observium] mysqld: The table 'ports_cbqos' is full Hello. Running: Observium CE 0.16.1.7533 on RedHat 6.4 Keep getting this error msg in /var/log/mysqld.log 160218 10:21:28 [ERROR] /usr/libexec/mysqld: The table 'ports_cbqos' is full What can I do to fix it ? Disk space is available. BR Mikael

3 3

Development questions
by Philipp Griess 19 Feb '16

19 Feb '16

Dear all, I am currently developing a new application agent for Oracle databases and need some guidance on how to implement it properly. My first goal is to get the current and historical usage of each tablespace - a DB consists of multiple tablespaces. This would give a good overview of data growth inside a database. My application agent running on my DB is polling the data via SQL and returning it to observium as comma spaced values. The output looks as follows: CIT;600;596.63 COMPASS;28488;1406.5 COMPASS_IDX;27996;1568.06 CONFIG;1000;959.69 CONTROLLING;600;596.69 CSR;40960;4966 Now I'm almost at my question. All existing application agents I know are rather static, containing only certain fixed (and hard coded) entities. Tablespaces are much like storage in my point of view so I think it would be a good idea to implement them as a new storage-type in the storage table of the observium database. Is this a proper way to do it or do you suggest a different approach? I'd like to be as compatible as possible to future updates and would also contribute my code if anyone needs it. Please let me know your thoughts. Thanks and kind regards, Philipp

1 0

mysqld: The table 'ports_cbqos' is full
by Fältman, Mikael 18 Feb '16

18 Feb '16

Hello. Running: Observium CE 0.16.1.7533 on RedHat 6.4 Keep getting this error msg in /var/log/mysqld.log 160218 10:21:28 [ERROR] /usr/libexec/mysqld: The table 'ports_cbqos' is full What can I do to fix it ? Disk space is available. BR Mikael

1 0

Fwd: Removing Dashboard
by Andres P 18 Feb '16

18 Feb '16

Hi Guys! After do the observium upgrade appears in the frontpage on the left a Dashboard, there is any form to remove it and come back to the old template. Regards Andres

3 3

Unknown Locations in Device > Locations menu
by Jacob Bisby 18 Feb '16

18 Feb '16

Hi All I'm having some trouble with Observium's mapping - we have it configured to build the Location list and geolocation, etc automatically based on the address/location pulled via SNMP. This works for almost every device we have, but there are two devices which show up under Unknown Location, even though Observium has pulled correct and valid address data for them. It does not appear to successfully pull co-ordinates for the address either, as the two devices appear on the map in the middle of the ocean. I have tried switching from the Yahoo API to the Google API (with API key) but this has not changed the behaviour of the issue. Currently on version 0.16.2.7592, we update via SVN once a month and we were having this same issue on 0.16.1.x as-well. Hoping somebody here has seen this issue before and can help me out or point me in the right direction.

2 5

High CPU usage on Observium
by Jose Colin 17 Feb '16

17 Feb '16

Hello Guys i see a lot of php processes running on the server, do you have any idea about this behavior if it needs to change some configuration stuff? top - 23:43:36 up 1:33, 1 user, load average: 19.78, 18.44, 16.29 Tasks: 240 total, 24 running, 216 sleeping, 0 stopped, 0 zombie %Cpu(s): 82.7 us, 16.6 sy, 0.0 ni, 0.0 id, 0.0 wa, 0.0 hi, 0.7 si, 0.0 st KiB Mem: 3945832 total, 2334788 used, 1611044 free, 235988 buffers KiB Swap: 4194300 total, 0 used, 4194300 free. 954876 cached Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 12364 root 20 0 136472 30692 10532 R 4.983 0.778 0:22.10 php 23927 root 20 0 139032 33248 10536 R 4.983 0.843 0:39.62 php 32704 root 20 0 145432 39780 10536 R 4.983 1.008 1:11.48 php 30112 root 20 0 134652 28824 10532 R 3.654 0.730 0:16.65 php 5722 root 20 0 155420 49628 10536 R 3.322 1.258 2:25.48 php 17915 root 20 0 133372 27524 10532 S 3.322 0.698 0:09.60 php 20140 root 20 0 152344 46608 10536 R 3.322 1.181 1:55.92 php 26947 root 20 0 136984 31220 10536 R 3.322 0.791 0:26.82 php 10380 root 20 0 154136 48280 10536 S 2.990 1.224 2:10.99 php 20593 root 20 0 142360 36632 10536 S 2.990 0.928 0:55.83 php 30207 root 20 0 151320 45408 10536 S 2.990 1.151 1:50.79 php 1680 mysql 20 0 979436 141336 7308 S 2.326 3.582 1:15.83 mysqld 17979 root 20 0 143896 38228 10536 R 2.326 0.969 1:06.13 php 530 root 20 0 133884 28112 10532 R 1.993 0.712 0:11.50 php 9628 root 20 0 138520 32664 10536 R 1.993 0.828 0:33.49 php 30062 root 20 0 148504 42712 10536 R 1.661 1.082 1:28.73 php 6361 root 20 0 141088 35480 10536 S 1.329 0.899 0:47.94 php 3407 root 20 0 142616 36804 10536 S 0.997 0.933 1:00.61 php 13068 root 20 0 150040 44220 10536 S 0.997 1.121 1:41.53 php 15851 root 20 0 152600 46744 10536 R 0.997 1.185 2:02.85 php 8427 root 20 0 154648 48844 10536 S 0.664 1.238 2:19.62 php 15440 root 20 0 146456 40572 10536 S 0.664 1.028 1:19.81 php 595 root 20 0 12032 3800 672 S 0.332 0.096 0:14.53 haveged 3474 root 20 0 133116 27260 10532 S 0.332 0.691 0:07.57 php 11900 root 20 0 16100 1692 1108 R 0.332 0.043 0:03.48 top 12576 root 20 0 153112 47328 10536 S 0.332 1.199 2:07.73 php thanks for your attention. Jose

3 5

Missing dBm in Cisco IOS
by chott＠praha1.net 17 Feb '16

17 Feb '16

Hello team, after some upgrade in history now missing SFP dBm in Cisco 3750 platform in Cisco Catalyst 6500 show dBm SFPs [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 2

Device mix-up
by Laz C. Peterson 17 Feb '16

17 Feb '16

So, weird thing happened today … We had a network outage that lasted for maybe 45 minutes that kept Observium from monitoring one site. When Observium resumed its normal monitoring activities, it somehow added a whole bunch of inventory items for a Cisco router to a KVM virtual server. About 10 minutes ago, it deleted all of the Cisco items, and is now back to normal. Has anyone seen anything like this before? Does anyone know what might have caused this? ~ Laz Peterson Paravis, LLC

2 3

Traffic Accounting not updating
by Cameron Murray 16 Feb '16

16 Feb '16

Adam, It appears that our OBS isn't updating the accounting details such as 95%ile. The cron task is identical to the how-to. What command can we run to manually update these figures?

3 6

Purchase observium subscription for multiple years (2-3)
by Arya, Renuka [MED] 16 Feb '16

16 Feb '16

Hi Team, Our subscription for the year 2015 has been expired. Is there a way we can by the subscription for Observium for multiple years (2 or 3 years)? Please let us know. Thanks! Regards Renuka ******************************************************************************** This e-mail is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged and confidential. If the reader of this e-mail message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is prohibited. If you have received this e-mail in error, please notify the sender and destroy all copies of the transmittal. Thank you University of Chicago Medicine and Biological Sciences ********************************************************************************

2 1

Speeding up caching and database
by Louis Bailleul 16 Feb '16

16 Feb '16

Hi Team, I have a performance issue with the web interface. My Observium is monitoring 3095 devices from which 168 are switches (Just a bit less than 20000 ports total). My server is an IBM X3650 M4, 32G of ram, 6 cores and a raid 10 of SSD. I am more than happy with the polling performance has it finishing in under 200seconds. But the web interface is quite annoying : I have a minimum Time to first bit of ~2seconds. Once these two seconds have passed the page load almost instantly, graphs included. So the question is, can I speed things up ? And if yes how ? It looks like Observium is spending about a second in the database and says that the Cache took 2 seconds to process (?). Do I have some leverage on these points to make it faster ? Page load time (Just a device page) : Connection Setup TIME Queueing 5.24 ms Stalled 1.26 ms Request sent 0.80 ms Waiting (TTFB) 3.29 s Content Download 26.62 ms Explanation 3.33 s Observium Performance report : Page 2.281s Cache 2.047s MySQL Cell 50/0.0633s Row 35/0.0113s Rows 49/0.7822s Column 8/0.0564s Memory Cached 180MB Page 189MB Peak 229MB Versions: Observium 0.16.1.7535 (27th January 2016) OS Linux 3.10.0-327.el7.x86_64 [amd64] (CentOS 7.2.1511) Apache 2.4.6 (CentOS) PHP/5.4.16 PHP 5.4.16 Python 2.7.5 MySQL 5.5.44-MariaDB-log (extension: mysqli 5.5.44-MariaDB) SNMP NET-SNMP 5.7.2 RRDtool 1.4.8 Stats : Statistics DB size 606MB RRD size 134GB Devices 3095 Ports 19390 IPv4 Addresses 6148 IPv4 Networks 44 IPv6 Addresses 2959 IPv6 Networks 1 Services 0 Applications 0 Processors 61262 Memory 15563 Storage 11742 Disk I/O 97461 HR-MIB 96815 Entity-MIB 7292 Syslog Entries 0 Eventlog Entries 172938 Sensors 3863 Toner Mysqltuner output : -------- Performance Metrics ------------------------------------------------- [--] Up for: 2d 21h 57m 9s (260M q [1K qps], 5K conn, TX: 283B, RX: 45B) [--] Reads / Writes: 59% / 41% [--] Binary logging is disabled [--] Total buffers: 10.5G global + 4.7M per thread (650 max threads) [OK] Maximum reached memory usage: 11.2G (35.94% of installed RAM) [OK] Maximum possible memory usage: 13.5G (43.37% of installed RAM) [OK] Slow queries: 0% (14K/260M) [OK] Highest usage of available connections: 21% (142/650) [OK] Aborted connections: 0.00% (0/5477) [OK] Query cache efficiency: 32.3% (74M cached / 230M selects) [OK] Query cache prunes per day: 0 [OK] Sorts requiring temporary tables: 0% (129 temp sorts / 182K sorts) [OK] Temporary tables created on disk: 0% (201 on disk / 112K total) [OK] Thread cache hit rate: 97% (142 created / 5K connections) [OK] Table cache hit rate: 102% (922 open / 896 opened) [OK] Open file limit used: 5% (52/1K) [OK] Table locks acquired immediately: 97% (244M immediate / 249M locks) -------- MyISAM Metrics ----------------------------------------------------- [!!] Key buffer used: 18.0% (28M used / 157M cache) [OK] Key buffer size / total MyISAM indexes: 150.0M/99.0K [!!] Read Key buffer hit rate: 93.3% (15 cached / 1 reads) -------- InnoDB Metrics ----------------------------------------------------- [--] InnoDB is enabled. [OK] InnoDB buffer pool / data size: 8.0G/579.1M [!!] InnoDB buffer pool instances: 1 [!!] InnoDB Used buffer: 6.67% (34952 used/ 524287 total) [OK] InnoDB Read buffer efficiency: 100.00% (2079385726 hits/ 2079395120 total) [!!] InnoDB Write buffer efficiency: 0.00% (0 hits/ 1 total) [OK] InnoDB log waits: 0.00% (0 waits / 11253445 writes) -------- AriaDB Metrics ----------------------------------------------------- [--] AriaDB is disabled. -------- Replication Metrics ------------------------------------------------- [--] No replication slave(s) for this server. [--] This is a standalone server.. -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance Remove Anonymous User accounts - there are 2 anonymous accounts. Set up a Password for user with the following SQL statement ( SET PASSWORD FOR 'user'@'SpecificDNSorIp' = PASSWORD('secure_password'); ) Set up a Secure Password for user@host ( SET PASSWORD FOR 'user'@'SpecificDNSorIp' = PASSWORD('secure_password'); ) Restrict Host for user@% to user@SpecificDNSorIp Variables to adjust: innodb_buffer_pool_instances(=8) ------------------------------------------------------------------------------------- Thanks. Best regards, Louis [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/PGS_LOGO_RGB_42x53px.jpg]<http://www.pgs.com> Louis Bailleul Computer Systems Engineer Imaging & Engineering | Imaging Telephone: +44 1932 376000 Direct: +44 1932 376842 VOIP: 74416842 Mobile: +44 7786 525307 Email: louis.bailleul(a)pgs.com<mailto:Louis.Bailleul@pgs.com> A Clearer Image | www.pgs.com<http://www.pgs.com> [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/150731-ColourWave-660x14…] Address: 4 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, United Kingdom This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

4 6

Accounting for Power/Current
by chott＠praha1.net 16 Feb '16

16 Feb '16

Hello team, we are looking for solution how we can create accounting for Power/Current like Mettered PDU from APC Thank you Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 1

Sorting on traffic bug?
by Steffie Morris 13 Feb '16

13 Feb '16

Hi, when you are in the ports view of a switch, and you sort on the column traffic. speeds op 900Mbit are sorted before 1.5Gbit. probably because 900 is larger than 1.5 but the unit is different so i guess that needs to be taken into account somehow?

2 1