- observium - lists.observium.org

Arista Light levels reading
by Tomas Morales 14 Dec '15

14 Dec '15

Hi We are trying to monitor the light levels in fibre ports in our Arista switches but looks like it is no managed properly if we compare with a Brocade router. See attached the screenshoots for each device. For Arista, we see the "DOM TX" and "DOM RX" entries taken as "Power" but in Brocade they are taken as "dBm". I can provide the database output if required. I can see differences in the sensor table for sensors from Arista and Brocade devices. Any advice regarding how to fix this? I Regards tomas --- LMAX Exchange, Yellow Building, 1A Nicholas Road, London W11 4AN http://www.LMAX.com/ #1 Fastest Growing Tech Company in the UK - Sunday Times Tech Track 100 (2014) 2015 Best Margin Sector Platform - Profit & Loss Readers' Choice Awards 2015 Best FX Trading Venue - ECN/MTF - WSL Institutional Trading Awards 2014 Best Margin Sector Platform - Profit & Loss Readers' Choice Awards 2014 Best FX Trading Venue - ECN/MTF - WSL Institutional Trading Awards 2014 Best Infrastructure/Technology Initiative - WSL Institutional Trading Awards 2013 #15 Fastest Growing Tech Company in the UK - Sunday Times Tech Track 100 2013 Best Overall Testing Project - The European Software Testing Awards 2013 Best Margin Sector Platform - Profit & Loss Readers' Choice Awards 2013 Best FX Trading Platform - ECN/MTF - WSL Institutional Trading Awards 2013 Best Executing Venue - Forex Magnates Awards --- FX and CFDs are leveraged products that can result in losses exceeding your deposit. They are not suitable for everyone so please ensure you fully understand the risks involved. This message and its attachments are confidential, may not be disclosed or used by any person other than the addressee and are intended only for the named recipient(s). This message is not intended for any recipient(s) who based on their nationality, place of business, domicile or for any other reason, is/are subject to local laws or regulations which prohibit the provision of such products and services. This message is subject to the following terms (http://lmax.com/pdf/general-disclaimers.pdf), if you cannot access these, please notify us by replying to this email and we will send you the terms. If you are not the intended recipient, please notify the sender immediately and delete any copies of this message. LMAX Exchange is the trading name of LMAX Limited. LMAX Limited operates a multilateral trading facility. LMAX Limited is authorised and regulated by the Financial Conduct Authority (firm registration number 509778) and is a company registered in England and Wales (number 6505809). LMAX Hong Kong Limited is a wholly-owned subsidiary of LMAX Limited. LMAX Hong Kong is licensed by the Securities and Futures Commission in Hong Kong to conduct Type 3 (leveraged foreign exchange trading) regulated activity with CE Number BDV088.

3 2

Re: [Observium] SNMP and Large FileSystems (100TB+)
by Ric Davis 14 Dec '15

14 Dec '15

With RH 6.6 and 6.7 (I've not tried earlier) I've found that putting realStorageUnits 0 in snmpd.conf (and obviously restarting the daemon) appears to provide a fix. It's noted in bug BZ#654384 <https://bugzilla.redhat.com/show_bug.cgi?id=654384> here: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/5/ht… It may be worth amending the FAQ ? -- Ric

1 0

Where to add license information
by Ken Robin Sivertsvik 14 Dec '15

14 Dec '15

Where and how do i add license information to my observium instalation? -- Ken Robin Sivertsvik Rissa Kraftlag SA | Markedskonsulent Fiber/ISP/IKT Tlf: 45255653 | krs(a)rissakraft.no | @ksivertsvik

2 1

Re: [Observium] observium Digest, Vol 65, Issue 49
by Dudu Handelman 13 Dec '15

13 Dec '15

Hi Rhian. Just use the latest netsnmp and it should be ok. I have 200Tb xfs and all ok. After upgrade. David Sent from my Samsung device -------- Original message -------- From: observium-request(a)observium.org Date: 13/12/2015 15:18 (GMT+01:00) To: observium(a)observium.org Subject: observium Digest, Vol 65, Issue 49 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. SNMP and Large FileSystems (100TB+) (Rhian Resnick) 2. Re: SNMP and Large FileSystems (100TB+) (Tom Laermans) 3. Re: SNMP and Large FileSystems (100TB+) (Rhian Resnick) ---------------------------------------------------------------------- Message: 1 Date: Sun, 13 Dec 2015 13:41:39 +0000 From: Rhian Resnick <rresnick(a)fau.edu> To: Observium Network Observation System <observium(a)observium.org> Subject: [Observium] SNMP and Large FileSystems (100TB+) Message-ID: <BL2PR04MB020A904E5733C4744FA572BCBEC0(a)BL2PR04MB020.namprd04.prod.outlook.com> Content-Type: text/plain; charset="iso-8859-1" Good morning, We recently noticed that SNMP is having difficulty handling large file sysystem. We have a 120TB XFS system that is reporting on 4.4TB and alerting because SNMP is reporting the wrong values. snmpwalk -mALL -v2c -{COM} {HOST} hrStorageTable | grep 40 HOST-RESOURCES-MIB::hrStorageIndex.40 = INTEGER: 40 HOST-RESOURCES-MIB::hrStorageType.40 = OID: HOST-RESOURCES-TYPES::hrStorageFixedDisk HOST-RESOURCES-MIB::hrStorageDescr.40 = STRING: /home HOST-RESOURCES-MIB::hrStorageAllocationUnits.40 = INTEGER: 4096 Bytes HOST-RESOURCES-MIB::hrStorageSize.40 = INTEGER: 1186465536 HOST-RESOURCES-MIB::hrStorageUsed.40 = INTEGER: 1036605829 HOST-RESOURCES-MIB::hrStorageUsed.44 = INTEGER: 666446640 Some forums have indicated this can be resolved by upgrading to 64 bit integers but I am not an SNMP expert. Has anyone seen this behavior and if so how do we work around it? In the HPC world this is a small name space so I worry about monitoring storage on our Lustre FS. Thanks Rhian Resnick Assistant Director Middleware and HPC Office of Information Technology Florida Atlantic University 777 Glades Road, CM22, Rm 218 Boca Raton, FL 33431 Phone 561.297.2647 Fax 561.297.0222 [image] <https://hpc.fau.edu/wp-content/uploads/2015/01/image.jpg>

1 0

mod_auth_kerb
by Ciro Iriarte 13 Dec '15

13 Dec '15

Hi!, is anyone using external authentication with kerberos?, I have an old version (4586) running without issues with sles11+apache+kerberos but trying to run a current release (7203) on the same host, it's like apache doesn't accept the user/password pair (keeps asking for them). It might be a misconfiguration, but I would like to know if anyone else is using a similar configuration nowadays or has comments about it. Regards, -- Ciro Iriarte http://iriarte.it --

3 15

Alerting - match multiple ASNs ?
by Robert Williams 10 Dec '15

10 Dec '15

Hi, What’s the correct syntax for an entity match which will match a selection of ASNs? I need an alert checker which will look for a specific set of ASNs and alert for any BGP session being not-up. Currently for our iBGP we use: [Conditions] bgpPeerState ne established bgpPeerAdminStatus notequals stop [Device] * [Entity Match] bgpPeerRemoteAs match <ourASN> This works perfectly. Now – what I’m after is that I need a new checker which will match eBGP ASNs like 174,3356,2914,5580 etc. all in one rule (the ‘important’ ASNs, for want of a better term). I have tried a selection of things but I’m obviously missing what the logical ‘or’ element should be in this case, as all my attempts at using multiple ASNs within a match just result in zero matches. Can someone point me in the right direction please? Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

3 4

Clavister device as new OS
by Gregory Storme 10 Dec '15

10 Dec '15

Hi, I'm trying to add Clavister cOS as a supported OS, but without success.What I've done: - Edit includes/definitions/os.inc.php:$os = "clavister";$config['os'][$os]['vendor'] = "Clavister";$config['os'][$os]['text'] = "Clavister cOS";$config['os'][$os]['type'] = "network";$config['os'][$os]['icon'] = "clavister";$config['os'][$os]['graphs'][] = "device_bits";$config['os'][$os]['graphs'][] = "device_processor";$config['os'][$os]['graphs'][] = "device_mempool";$config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.5089.1";$config['os'][$os]['sysDescr'][] = "/^Clavister/";$config['os'][$os]['mibs'][] = "CLAVISTER-MIB";$config['os'][$os]['mibs'][] = "CLAVISTER-SMI-MIB"; - create includes/discovery/os/clavister.inc.php:<?php if (strstr($sysObjectId, ".1.3.6.1.4.1.5089.1")) { $os = "clavister"; } else if (preg_match("/^Clavister/", $sysDescr)) { $os = "clavister"; } - created the CLAVISTER-MIB & CLAVISTER-SMI-MIB (downloaded from the vendor website) under the mibs folder When I add such a device and run the discovery & poller, it seems as the Clavister MIBs are not used.The OS type is detected though? ##### devicename [338] ##### o OS clavister o Last poll duration 0.42 seconds o Last Polled 2015-12-10 01:28:30 o SNMP Version v2c o Device status Device is reachable by PING (0.36ms) and SNMP (7.20ms) o Modules Excluded ipmi, junose-atm-vp, cisco-ipsec-flow-monitor, cisco-remote-access-monitor, cisco-cef, arista-software-ip-forwarding,cipsec-tunnels, cisco-cbqos, cisco-eigrp, netscaler-vsvr, aruba-controller o Disabled Globally unix-agent, cisco-vpdn, wmi o Modules Enabled system, os, sensors, status, processors, mempools, storage, netstats, hr-mib, ucd-mib, ipSystemStats, ports, bgp-peers, toner,ucd-diskio, wifi, p2p-radios, ospf, sla, mac-accounting, loadbalancer, entity-physical, applications, fdb-table, graphs,oids ##### Module Start: system ##### o Uptime 8 days, 1h 57m 55s o sysObjectID .1.3.6.1.4.1.5089.1 o snmpEngineID o sysDescr Clavister cOS Core 10.21.02.01-25325 o sysName n/a o Location N/A o Module time 0.0578s ##### Module Start: os ##### o OS Poller Generic... What am I doing wrong?

3 3

Error after update to revision 7236
by Alex Winder ＠ M5i 09 Dec '15

09 Dec '15

Hi everyone, We've just updated to revision 7236 and got the following error. -- Updating database/file schema 251 -> 252 ... (db) done (1 errors). In /opt/observium/logs/update-errors.log we see the following error [2015/12/09 19:35:36 +0000] discovery.php(19989): Query: ALTER TABLE `authlog` CHANGE `user_agent` `user_agent` TEXT CHARACTER SET utf8 COLLATE utf8_general_ci NULL; [2015/12/09 19:35:36 +0000] discovery.php(19989): Error: (1054) Unknown column 'user_agent' in 'authlog' Should we do anything for this? Regards, Alex.

3 3

Cisco ASA - inaccurate traffic for one specific interface
by Ben Maschke 09 Dec '15

09 Dec '15

Hi guys, I've added a new ASA to Observium. The issue is that for one interface no packets have been collected so far: [image: Inline images 1] But in the details you can see that traffic has been collected: [image: Inline images 2] The result is that the overall traffic graph is inaccurate (traffic should be ~600Mbit/s): [image: Inline images 3] Cheers

3 3

Quagga with SNMP support.
by Gabriel Zamorski 08 Dec '15

08 Dec '15

Hello, Does anyone have a experience with snmp support in Quagga on Debian 7/8? I installed Quagga with SNMP support (smux or agentx) and configured Quagga to use snmp, but Observium doesn't see anything except an AS number. In Properties > MIBs section there are a couple of errors like: - bgpLocalAs.0 1m 28s ago SNMP error - .1.3.6.1.2.1.25.3.3.1.2.196608 (608 to 619) SNMP error On the other hand, in a similar configuration in VyOS everything works fine. I'm not sure if it depends on patched quagga on VyOS or a misconfiguration in my environment. Regards! Gabriel

4 5

Re: [Observium] Everything is DOWN after svn UP :-)
by Richard Müller 08 Dec '15

08 Dec '15

Hy *, I also experienced this issue some minutes ago. My reason was that "someone" (svn?) created a .index file in the MIB Directory, which caused snmpwalk to die: root@horstname:/opt/observium# /usr/bin/snmpget -v2c -c '***' -Pu -OQUst -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'horstname2':'161' sysObjectID.0 sysUpTime.0 add_mibdir: strings scanned in from /opt/observium/mibs/rfc/.index are too large. count = 136 MIB search path: /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp Cannot find module (SNMPv2-MIB): At line 0 in (none) sysObjectID.0: Unknown Object Identifier (Sub-id not found: (top) -> sysObjectID) sysUpTime.0: Unknown Object Identifier (Sub-id not found: (top) -> sysUpTime) removing the /opt/observium/mibs/rfc/.index file fixed the glitch - does anybody know whats the purpose of these files and where do they come from? Thanks Richard Message: 2 Date: Fri, 4 Dec 2015 12:05:24 +0100 From: Gabriel Zamorski <gabriel.zamorski(a)domeny.pl> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Everything is DOWN after svn UP :-) Message-ID: <5CBBE15E-ED0C-4B8C-B606-E5C5B73DE9DF(a)domeny.pl> Content-Type: text/plain; charset="utf-8" Debian 7.9, libsnmp-base 5.4.3~dfsg-2.8+deb7u1, libsnmp15 5.4.3~dfsg-2.8+deb7u1, php5-snmp 5.4.45-0+deb7u2, snmp 5.4.3~dfsg-2.8+deb7u1. It was updated from 7224 to 7226, then I did rollback. It is strange, today I updated to the latest version 7227 with no problem (without alerts). G. > Wiadomo?? napisana przez Adam Armstrong <adama(a)memetic.org> w dniu 04.12.2015, o godz. 08:54: > > Given that it's virtually impossible for this to be an actual bug in the SVN (hundreds of users would be complaining), it might help to have some additional information about your installation. > > Do you know what version you updated from? What are you running it on? What version of net-snmp? > > adam. >> On 04/12/2015 07:53:05, Gabriel Zamorski <gabriel.zamorski(a)domeny.pl> wrote: >> >> Hello, >> >> Yesterday after upgrading observium (like everyday morning) we got hundreds of alerts. It seems that observium could not connect to any machine using SNMP - I checked this from console via ./poller.php and every server was unreachable, so I had to rollback to the earlier revision. Do you know anything about this? >> >> Regards, >> G. >> >> >> -- Richard Müller | Geschäftsführer teamix GmbH Südwestpark 43 90449 Nürnberg Tel.: +49 911 30999 0 | Fax: +49 911 30999 99 mail: rm(a)teamix.de | web: http://www.teamix.de | blog: http://blog.teamix.de Amtsgericht Nürnberg, HRB 18320 | Geschäftsführer: Oliver Kügow, Richard Müller *** Bitte liken Sie uns auf Facebook: facebook.com/teamix *** _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20151204/cc4b310…> -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 3587 bytes Desc: not available URL: <http://postman.memetic.org/pipermail/observium/attachments/20151204/cc4b310…> ------------------------------ Message: 3 Date: Fri, 04 Dec 2015 11:58:55 +0000 From: Adam Armstrong <adama(a)observium.org> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Everything is DOWN after svn UP :-) Message-ID: <1516cdbfc18.2779.11b54b3dd25b712395dab9818c67596f(a)observium.org> Content-Type: text/plain; charset="utf-8"; Format="flowed" I think this is perhaps, again, the pesky svn broken file issue. This problem seems to have gotten significantly worse since the svn database version changes. Adam. Sent with AquaMail for Android http://www.aqua-mail.com On 4 December 2015 11:05:41 am Gabriel Zamorski <gabriel.zamorski(a)domeny.pl> wrote: > Debian 7.9, libsnmp-base 5.4.3~dfsg-2.8+deb7u1, libsnmp15 > 5.4.3~dfsg-2.8+deb7u1, php5-snmp 5.4.45-0+deb7u2, snmp > 5.4.3~dfsg-2.8+deb7u1. It was updated from 7224 to 7226, then I did > rollback. It is strange, today I updated to the latest version 7227 > with no problem (without alerts). > > G. > > > > >> Wiadomo?? napisana przez Adam Armstrong <adama(a)memetic.org> w dniu >> 04.12.2015, o godz. 08:54: >> >> Given that it's virtually impossible for this to be an actual bug in >> the SVN (hundreds of users would be complaining), it might help to >> have some additional information about your installation. >> >> Do you know what version you updated from? What are you running it >> on? What version of net-snmp? >> >> adam. >>> On 04/12/2015 07:53:05, Gabriel Zamorski <gabriel.zamorski(a)domeny.pl> wrote: >>> >>> Hello, >>> >>> Yesterday after upgrading observium (like everyday morning) we got >>> hundreds of alerts. It seems that observium could not connect to any >>> machine using SNMP - I checked this from console via ./poller.php >>> and every server was unreachable, so I had to rollback to the >>> earlier revision. Do you know anything about this? >>> >>> Regards, >>> G. >>> >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > > ---------- > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20151204/661784e…>

3 2

Minor documentation typo
by Roland Hill 08 Dec '15

08 Dec '15

Hi team, There is a minor typo on this page: http://www.observium.org/docs/unix_agent/ Specifically this, scp /opt/observium/scripts/observium_agent_xinetd user@your_server:/etc/xinet.d/observium_agent_xinetd Note that /etc/xinet.d should be /etc/xinetd.d Very minor, but thought I'd let you know about it. -- Regards, Roland PGP Key 0xDA39319B = BCF0 1214 BAE9 5A3D 46FC 21A6 360D 9398 DA39 319B

2 1

Regex in an entity match not working right
by Spencer Ryan 07 Dec '15

07 Dec '15

Hi All, I'm trying to match ports with the name port-channel1 through 19, and the "match" keyword isn't doing what I want. What I think is correct is "ifName match port-channel([1-9]|1[0-9])" However that gives me 0 matches. If I change it to something like ifName match port-channel*" I get all the port channels, so it's matching the device properly, but for this alert checker I just need port channels 1-19. Any ideas? I've tried a bunch of combinations and nothing seems to work right. Even "port-channel." doesn't match the additional character. *Spencer Ryan* | Senior Systems Administrator | sryan(a)arbor.net *Arbor Networks* +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com

3 5

Arista switches environment sensors have stopped working
by Ben Maschke 07 Dec '15

07 Dec '15

Hi guys, after updating to the latest subscriber version all of our checks for environment sensors (Arista switches) have stopped working: [image: Inline images 1] It seems that it has stopped receiving proper sensor data: [image: Inline images 2] Thx -- *Ben Maschke* Senior System Engineer *Tel:* +44 (0) 20 8742 6820 *Shazam* 26-28 Hammersmith Grove, London, W6 7HA Please consider the environment before printing this document Shazam Entertainment Limited is incorporated in England and Wales under company number 3998831 and its registered office is at 26-28 Hammersmith Grove, London W6 7HA.

4 8

toggles and pop ups have stopped working
by observium＠istar.net.nz 05 Dec '15

05 Dec '15

Hello We've recently updated Observium (now 0.15.12.7230) and enabled SSH and the on/off switches are not being shown and the date popups don't work. If I browse to it on http it seems to be fine. I've checked the apache config and it looks identical, any thoughts? Thanks SHANE lE <mailto:shanson@istar.net.nz> shanson(a)istar.net.nz lW <https://istar.net.nz/> istar.net.nz lA PO Box 911507, Victoria St West, Auckland lM +64 21 623 903

2 2

UNIX Agent
by Alex Winder ＠ M5i 05 Dec '15

05 Dec '15

Hi all, I'm currently trying to get the UNIX agent for Observium working with some of our hosts so that we can obtain more data for applications, primarily NGINX. We are now seeing data on the agent execution time graph. We are getting responses from the Observium host to the NGINX host via Telnet, and receiving information about NGINX. We are getting the NGINX status information through Lynx on the localhost. We are using the following configs. /etc/xinetd.d/observium_agent_xinetd service observium_agent { type = UNLISTED port = 36602 socket_type = stream protocol = tcp wait = no user = root server = /usr/bin/observium_agent # configure the IPv[4|6] address(es) of your Observium server here: only_from = [IPs removed] 127.0.0.1 ::1 # Don't be too verbose. Don't log every check. This might be # commented out for debugging. If this option is commented out # the default options will be used for this service. log_on_success = disable = no } /usr/lib/observium_agent/local/nginx !/usr/bin/env python import urllib2 import re data = urllib2.urlopen('http://localhost/nginx-status').read() params = {} for line in data.split("\n"): smallstat = re.match(r"\s?Reading:\s(.*)\sWriting:\s(.*)\sWaiting:\s(.*)$", line) req = re.match(r"\s+(\d+)\s+(\d+)\s+(\d+)", line) if smallstat: params["Reading"] = smallstat.group(1) params["Writing"] = smallstat.group(2) params["Waiting"] = smallstat.group(3) elif req: params["Requests"] = req.group(3) else: pass dataorder = [ "Active", "Reading", "Writing", "Waiting", "Requests" ] print "<<<nginx>>>\n"; for param in dataorder: if param == "Active": Active = int(params["Reading"]) + int(params["Writing"]) + int(params["Waiting"]) print Active else: print params[param] /etc/nginx/sites-automatic/localhost.conf server { listen 80; listen [::]:80; server_name localhost; server_name_in_redirect off; charset utf-8; log_not_found on; access_log /var/log/nginx/localhost_combined-access.log combined buffer=128k flush=5m; error_log /var/log/nginx/localhost_error.log; location / { root /local-storage/localhost/nginx-hosted/public_html; } location /nginx-status { stub_status on; access_log off; allow 127.0.0.1; allow ::1; deny all; } } Any help with this would be much appreciated. Where can we expect to see logs? Any tips on how we can resolve this? Regards, Alex.

3 4

Problems with fresh installation - svn revision 7229 (and stable too)
by Eduardo Schoedler 05 Dec '15

05 Dec '15

# php includes/update/update.php -- Updating database/file schema 000 -> 001 ... (db) done. 001 -> 002 ... (db) done. 002 -> 003 ... (db) done. 003 -> 004 ... (db) done. 004 -> 005 ... (db) done. 005 -> 006 ... (db) done. 006 -> 007 ... (db) done. 007 -> 008 ... (db) done. 008 -> 009 ... (db) done. 009 -> 010 ... (db) done. 010 -> 011 ... (db) done. 011 -> 012 ... (db) done. 012 -> 013 ... (db) done. 013 -> 014 ... (db) done. 014 -> 015 ... (db) done. 015 -> 016 ... (db) done. 016 -> 017 ... (db) done. 017 -> 018 ... (db) done. 018 -> 019 ... (db) done. 019 -> 020 ... (db) done. 020 -> 021 ... (db) done. 021 -> 022 ... (db) done. 022 -> 023 ... (db) done. 023 -> 024 ... (db) done. 024 -> 025 ... (db) done. 025 -> 026 ... (db) done. 026 -> 027 ... (db) done. 027 -> 028 ... (db) done. 028 -> 029 ... (db) done. 029 -> 030 ... (db) done. 030 -> 031 ... (db) done. 031 -> 032 ... (db) done. 032 -> 033 ... (db) done. 033 -> 034 ... (db) done. 034 -> 035 ... (db) done. 035 -> 036 ... (db) done. 036 -> 037 ... (db) done. 037 -> 038 ... (db) done. 038 -> 039 ... (db) done. 039 -> 040 ... (db) done. 040 -> 041 ... (db) done. 041 -> 042 ... (db) done. 042 -> 043 ... (db) done. 043 -> 044 ... (db) done. 044 -> 045 ... (db) done. 045 -> 046 ... (db) done. 046 -> 047 ... (db) done. 047 -> 048 ... (db) done. 048 -> 049 ... (db) done. 049 -> 050 ... (db) done. 050 -> 051 ... (db) done. 051 -> 052 ... (db) done. 052 -> 053 ... (db) done. 053 -> 054 ... (db) done. 054 -> 055 ... (db) done. 055 -> 056 ... (db) done. 056 -> 057 ... (db) done. 057 -> 058 ... (db) done. 058 -> 059 ... (db) done. 059 -> 060 ... (db) done. 060 -> 061 ... (db) done. 061 -> 062 ... (db) done. 062 -> 063 ... (db) done. 063 -> 064 ... (db) done. 064 -> 065 ... (db) done. 065 -> 066 ... (db) done. 066 -> 067 ... (db) done. 067 -> 068 ... (db) done. 068 -> 069 ... (db) done. 069 -> 070 ... (db) done. 070 -> 071 ... (db) done. 071 -> 072 ... (db) done. 072 -> 073 ... (db) done. 073 -> 074 ... (php) Updating netscaler service RRDs 074 -> 075 ... (db) done. 075 -> 076 ... (db) done. 076 -> 077 ... (db) done. 077 -> 078 ... (db) done. 078 -> 079 ... (db) done. 079 -> 080 ... (db) done. 080 -> 081 ... (db) done. 081 -> 082 ... (db) done. 082 -> 083 ... (db) done. 083 -> 084 ... (db) done. 084 -> 085 ... (db) done. 085 -> 086 ... (db) done. 086 -> 087 ... (db) done. 087 -> 088 ... (db) done. 088 -> 089 ... (db) done. 089 -> 090 ... (db) done. 090 -> 091 ... (db) done. 091 -> 092 ... (db) done. 092 -> 093 ... (db) done. 093 -> 094 ... (db) done. 094 -> 095 ... (php) Converting alert serialize() arrays to JSON: 095 -> 096 ... (db) done. 096 -> 097 ... (db) done. 097 -> 098 ... (db) done. 098 -> 099 ... (db) done. 099 -> 100 ... (db) done. 100 -> 101 ... (db) done. 101 -> 102 ... (db) done. 102 -> 103 ... (db) done. 103 -> 104 ... (db) done. 104 -> 105 ... (db) done. 105 -> 106 ... (db) done. 106 -> 107 ... (db) done. 107 -> 108 ... (db) done. 108 -> 109 ... (db) done. 109 -> 110 ... (db) done. 110 -> 111 ... (db) done. 111 -> 112 ... (db) done. 112 -> 113 ... (db) done. 113 -> 114 ... (db) done. 114 -> 115 ... (db) done. 115 -> 116 ... (db) done. 116 -> 117 ... (db) done. 117 -> 118 ... (db) done. 118 -> 119 ... (db) done. 119 -> 120 ... (db) done. 120 -> 121 ... (db) done. 121 -> 122 ... (db) done. 122 -> 123 ... (db) done. 123 -> 124 ... (db) done. 124 -> 125 ... (db) done. 125 -> 126 ... (db) done. 126 -> 127 ... (php) Converting FDB count RRD ds fdb->value: 127 -> 128 ... (php) Rename old storage RRDs and DB: 128 -> 129 ... (php) Rename old mempools RRDs and DB: 129 -> 130 ... (db) done. 130 -> 131 ... (db) done. 131 -> 132 ... (db) done. 132 -> 133 ... (db) done. 133 -> 134 ... (db) done. 134 -> 135 ... (db) done. 135 -> 136 ... (db) done. 136 -> 137 ... (db) done. 137 -> 138 ... (db) done. 138 -> 139 ... (db) done. 139 -> 140 ... (db) done. 140 -> 141 ... (db) done. 141 -> 142 ... (db) done. 142 -> 143 ... (db) done. 143 -> 144 ... (db) done. 144 -> 145 ... (db) done. 145 -> 146 ... (db) done. 146 -> 147 ... (db) done. 147 -> 148 ... (db) done. 148 -> 149 ... (db) done. 149 -> 150 ... (db) done (2 errors). # svn update && ./discovery.php -h none Updating '.': At revision 7229. ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 0.15.12.7229 http://www.observium.org -- Updating database/file schema 149 -> 150 ... (db) done (10 errors). # cat update-errors.log [2015/12/04 23:06:38 +0000] discovery.php(68419): ====== Schema update 149 -> 150 ============== [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: ALTER TABLE `alert_assoc` CHANGE `device_attributes` `device_attribs` TEXT CHARACTER SET utf8 COLLATE utf8_unicode_ci NULL DEFAULT NULL; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1054) Unknown column 'device_attributes' in 'alert_assoc' [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: ALTER TABLE `alert_assoc` CHANGE `attributes` `entity_attribs` TEXT CHARACTER SET utf8 COLLATE utf8_general_ci NULL DEFAULT NULL ; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1054) Unknown column 'attributes' in 'alert_assoc' [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: ALTER TABLE `ports_perms` ADD `entity_type` VARCHAR( 32 ) NOT NULL AFTER `user_id` ; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1146) Table 'observium.ports_perms' doesn't exist [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: ALTER TABLE `ports_perms` CHANGE `port_id` `entity_id` INT( 11 ) NOT NULL ; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1146) Table 'observium.ports_perms' doesn't exist [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: UPDATE `ports_perms` SET `entity_type` = 'port' WHERE 1; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1146) Table 'observium.ports_perms' doesn't exist [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: RENAME TABLE `ports_perms` TO `entity_permissions` ; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1050) Table 'entity_permissions' already exists [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: INSERT `entity_permissions` (user_id,entity_id,entity_type) SELECT `bill_perms`.`user_id`,`bill_perms`.`bill_id`,'bill' AS `entity_type` FROM `bill_perms`; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1146) Table 'observium.bill_perms' doesn't exist [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: INSERT `entity_permissions` (user_id,entity_id,entity_type) SELECT `devices_perms`.`user_id`,`devices_perms`.`device_id`, 'device' AS `entity_type` FROM `devices_perms`; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1146) Table 'observium.devices_perms' doesn't exist [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: DROP TABLE `bill_perms`; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1051) Unknown table 'observium.bill_perms' [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: DROP TABLE `devices_perms`; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1051) Unknown table 'observium.devices_perms' # cat db.log [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1146 - Table 'observium.observium_attribs' doesn't exist), Query: SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema'; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1054 - Unknown column 'device_attributes' in 'alert_assoc'), Query: ALTER TABLE `alert_assoc` CHANGE `device_attributes` `device_attribs` TEXT CHARACTER SET utf8 COLLATE utf8_unicode_ci NULL DEFAULT NULL; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1054 - Unknown column 'attributes' in 'alert_assoc'), Query: ALTER TABLE `alert_assoc` CHANGE `attributes` `entity_attribs` TEXT CHARACTER SET utf8 COLLATE utf8_general_ci NULL DEFAULT NULL ; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1146 - Table 'observium.ports_perms' doesn't exist), Query: ALTER TABLE `ports_perms` ADD `entity_type` VARCHAR( 32 ) NOT NULL AFTER `user_id` ; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1146 - Table 'observium.ports_perms' doesn't exist), Query: ALTER TABLE `ports_perms` CHANGE `port_id` `entity_id` INT( 11 ) NOT NULL ; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1146 - Table 'observium.ports_perms' doesn't exist), Query: UPDATE `ports_perms` SET `entity_type` = 'port' WHERE 1; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1050 - Table 'entity_permissions' already exists), Query: RENAME TABLE `ports_perms` TO `entity_permissions` ; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1146 - Table 'observium.bill_perms' doesn't exist), Query: INSERT `entity_permissions` (user_id,entity_id,entity_type) SELECT `bill_perms`.`user_id`,`bill_perms`.`bill_id`,'bill' AS `entity_type` FROM `bill_perms`; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1146 - Table 'observium.devices_perms' doesn't exist), Query: INSERT `entity_permissions` (user_id,entity_id,entity_type) SELECT `devices_perms`.`user_id`,`devices_perms`.`device_id`, 'device' AS `entity_type` FROM `devices_perms`; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1051 - Unknown table 'observium.bill_perms'), Query: DROP TABLE `bill_perms`; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1051 - Unknown table 'observium.devices_perms'), Query: DROP TABLE `devices_perms`; -- Eduardo Schoedler

4 4

monitor tmpfs storage
by Simon Smith 04 Dec '15

04 Dec '15

Hi All, just moved our RRDs to tmpfs storage, and WOW I noticed a speed difference, not only in the graphs, but also in the IO load should of looked at http://observium.org/docs/persistent_ramdisk/ in the past DOH! however i’ve just noticed the observium isn’t showing it as a storage mount? can observium monitor actually monitor it at all ? also I’ve set my limit at 10GB as the server has 12GB of RAM, and the RRD folder is currently at 6.8GB bit of a stupid question but what happens if I’m close to the limit? as i knackered? more RAM server? regards Simon - Hestor Ltd

3 3

Update db schema error
by Tomasz Karczewski 04 Dec '15

04 Dec '15

I wanted to update db-schema but I got this error, [2015/12/04 13:14:32 +0100] discovery.php(2635): ====== Schema update 251 -> 252 ============== [2015/12/04 13:14:32 +0100] discovery.php(2635): Query: ALTER TABLE `eventlog` CHANGE `timestamp` `timestamp` TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP; [2015/12/04 13:14:32 +0100] discovery.php(2635): Error: (1114) The table '#sql-ae4_bf3697' is full Tomasz Karczewski Administrator Sieci olman tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

3 2

Alert Threshold for CBQoS drops
by Robert Williams 04 Dec '15

04 Dec '15

Hi, Is it possible to have alert elements/metrics which use data collected from CBQoS, like drops for example? Reason for request - we would like to get alerting for certain types of port (CORE for example) where QoS is performing drops. Currently (in another system) we poll a global statistic which gives us the 'total' number of drops per chassis or LC, but this does nothing more than point towards a chassis or line-card. A human then have to pick their way through the CBQoS stats to try to see where it was (if it was big), which very time consumptive. The statistics and framework all appear to be in place within Observium, just need to know if there are some metric conditions which can use CBQoS as a trigger, like ifCBQoSDrops_rate > 10 for example? So, is this already possible? Or should I make a feature request? Cheers all! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

2 2

Everything is DOWN after svn UP :-)
by Gabriel Zamorski 04 Dec '15

04 Dec '15

Hello, Yesterday after upgrading observium (like everyday morning) we got hundreds of alerts. It seems that observium could not connect to any machine using SNMP - I checked this from console via ./poller.php and every server was unreachable, so I had to rollback to the earlier revision. Do you know anything about this? Regards, G.

4 4

CBQOS does not appear to work under NX-OS
by Stephen Fulton 04 Dec '15

04 Dec '15

Hi there, I have a Cisco Nexus 7k running the NX-OS 6.2 train, and I've noticed that while Observium picks up on CBQOS for interfaces, there is no data being graphed. Observium does detect the class-maps/policy-maps, but no results in the graphs. There are errors on one port that should be picked up, but I'm not seeing it reflected. What can be done? BTW, I'm using the subscription version, latest stable (0.15.11.7203). -- Stephen

3 3

Zenoss Integration Sync
by Rudy Pancaro 03 Dec '15

03 Dec '15

Has anyone every integrated Observium and Zenoss together. Zenoss is another networking monitoring platform, but the platform could use a more friendly GUI. The Observium GUI is very nice. Please let me know if this is possible. I believe that Observium and Nagios integrates with one another, but our organization uses Zenoss. Thank you.

4 8

Device check and down alert question
by Ron Culler 03 Dec '15

03 Dec '15

I have noticed that I see down notices in Observium often when the snmp check fails (I have only seen this when checking servers (Windows/Linux). The device is up and a ping/icmp check would see this but because the snmp check had a problem I get a down indication. Sometimes it has to deal with the snmp service on the host being checked hanging or crashing, other times I have seen load or congestion cause it. Is there an option or would it make sense to add a feature that would check snmp first and in the event of an error fall back and do a ping/icmp check to see if the device is up or not? It would be beneficial to see if the server is up and get a notice about a snmp check failure. I could also see a check flow that would check snmp first, if it errored it would check with a ping, if the ping returns wait for the next snmp check before sending the notice or marking the device down. Ron Culler

2 1

recreate interface to down/up -event
by Geno 03 Dec '15

03 Dec '15

Hallo, i have the following problem. I server of mine a VPN-Service. This vpn-service restart some times (and with it it recreate a network interface with the same name "vpn-interface"). Observium delete the interface and create a new one (with the same name). The Question, is it possible to detect it and make a down up event out of it (and a mac change)? So it will use the same rrds, graphs and so on. Nice Wishes Geno

3 4

Creating a table with Unix-agent
by Daniel Kasen 02 Dec '15

02 Dec '15

Using the unix agent I can create graphs, but what if I wanted to just add a table to the apps tab? Basically what I am trying to do is keep an up-to-date table of custom strings for linux servers. *Daniel Kasen | REDFIN | Data Center Operations Engineerdaniel.kasen(a)redfin.com <daniel.kasen(a)redfin.com> | Tel: 206-859-2826 2025 1st Ave, Ste 500 | Seattle, WA 98121*

4 3

CAMBIUM ePMP 1000 shown as Generic MIPS
by Federico Olivieri 02 Dec '15

02 Dec '15

Hi All, I have just received from the vendor the MIBs for the CAMBIUM ePMP for FW version 2.5.1 and 2.4.2 (renamed CAMBIUM-ePMP-2.5.1-MIB and CAMBIUM-ePMP-2.4.2-MIB) I put them under the MIB folder root@T1000:/opt/observium/mibs/cambium# ls -l total 944 -rwxrwxr-x 1 user user 222338 Dec 2 15:06 CAMBIUM-ePMP-2.4.2-MIB -rwxrwxr-x 1 user user 215949 Dec 2 15:06 CAMBIUM-ePMP-2.5.1-MIB -rw-rw-r-- 1 user user 164656 Nov 20 2014 CAMBIUM-PTP800-V2-MIB -rw-rw-r-- 1 user user 13857 Nov 20 2014 MOTOROLA-PTP-MIB -rwxrwxr-x 1 user user 121942 Nov 4 2014 WHISP-APS-MIB -rwxrwxr-x 1 user user 107218 Nov 4 2014 WHISP-BOX-MIBV2-MIB -rwxrwxr-x 1 user user 3715 Nov 4 2014 WHISP-GLOBAL-REG-MIB -rwxrwxr-x 1 user user 96040 Nov 4 2014 WHISP-SM-MIB -rwxrwxr-x 1 user user 2416 Nov 4 2014 WHISP-TCV2-MIB root@T1000:/opt/observium/mibs/cambium# but OBSERVIUM still shows the antennas as generic "Linux server" [image: Immagine incorporata 1] Maybe I missed a step. There is something else that I need to do? Thanks for your help Federico

2 4

Webpage Display
by Aaron Hite 02 Dec '15

02 Dec '15

I upgrade to 0.15.11.7224 (30th November 2015) today and noticed that my webpage doesn’t display widescreen anymore. Both the normal and widescreen display the same way. My graphs now wrap and create multiple rows for display. Anyone else have this problem, or any thoughts on a solution? Thanks, Aaron

3 4

Cannot get nginx perf graphs to show up
by Tsvetan Blagoev (c) 01 Dec '15

01 Dec '15

>From observium box, I try telnet 192.168.10.101 36602 which is my remote nginx server, dumps system info plus nginx section with some counters; Application section and graphs never show for this host. I have also enabled explicitly unix agent from the agents tab of the configuration page. Am I missing something ? Regards, Tsener [PS CoE] Tsvetan Blagoev / Tsener Infrastructure and Tools Engineer, PS CoE +359 2 80 41627 -- Office +359 889 850 359 -- Mobile

1 0

API Details
by Kyle Hunter 30 Nov '15

30 Nov '15

Hey, I’ve been looking around and there appears to be 2 different APIs in observium. Is there a specific one which will be removed and the other updated? Thanks, Kyle Kyle Hunter | Network Engineer | The Summit Group E: khunter(a)thesummitgroup.com.au<mailto:khunter@thesummitgroup.com.au> | W: The Summit Group (Australia) Pty Ltd | P: | Level 1, 39 Railway Road, Blackburn VIC 3130 The Summit Group (USA) LLC | P: 321 216 3844 | Suite 1003, 364E Main Street, Middletown DE 19709 Postal: P.O. Box 3225, Doncaster East VIC 3109 Follow us on Facebook<http://www.facebook.com/thesummitgroup/> | LinkedIn<http://www.linkedin.com/company/1942329> | Twitter<http://twitter.com/summitgroupau/>

2 1

Memory utilization increasing continuously .......................!
by Chaman Rathee 30 Nov '15

30 Nov '15

Hi Team, I am monitoring 200 devices. But my memory utilization of server is continuously increasing. When my available physical memory comes near 20%, then my observium server starts dropouts/gaps in graph. Please help me . ......... With Best Regards, Chaman Rathee Mob. No:- +91-9560055816 [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

4 4

Disable CDP neighbour discovery?
by Ulrik Ivers 30 Nov '15

30 Nov '15

Hi, Is it possible to disable neighbour discovery via CDP but still leave it enabled for LLDP? The reason for asking is that we are a 100% LLDP shop, but some equipment run both CDP and LLDP. When looking at the tab "Neighbours" of such a device the neighbours are listed twice, one with protocol LLDP and one with protocol CDP. We would like to only do neighbour discovery via LLDP, if possible. I've looked through the options files and the documentation but haven't been able to find a setting to disable CDP. Regards, /Ulrik Ivers

3 2

Location menu - hierarchical without GeoLocation?
by Ulrik Ivers 29 Nov '15

29 Nov '15

Hi again, Corrected some typos to make the explanation a bit more understandable ... /Ulrik Hi, Trying to figure out whether it's possible to have the Location menu on the front page being hierarchical with GeoLocation DISABLED. Is this possible? Running version 7203. Our snmp location strings in our devices are on the format of: City, Building, Floor We'd like to have the Location menu on the frontpage being displayed hierarchical something like this: Location City A [3] Building A [3] Floor X [2] Floor Y [1] At the moment the menu looks like this with THREE devices of which TWO have the same location string Location City A, Building A, Floor X City A, Building A, Floor Y Any suggestions would be welcome. Regards, /Ulrik Ivers

2 2

Location menu - hierarchical without GeoLocation?
by Ulrik Ivers 29 Nov '15

29 Nov '15

Hi, Trying to figure out whether it's possible to have the Location menu on the front page being hierarchical with GeoLocation DISABLED. Is this possible? Running version 7203. Our snmp location strings in our devices are on the format of: City, Building, Floor We'd like to have the Location menu on the frontpage being displayed hierarchical something like this: Location City A [3] Building A [3] Floor X [2] Floor Y [1] At the moment the menu looks like this with tree devices of which to have the same location string Location City A, Building A, Floor X City A, Building A, Floor Y Any suggestions would be welcome. Regards, /Ulrik Ivers

1 0

Map error?
by linuxthefish 27 Nov '15

27 Nov '15

Hi, Why does my Observium show a blue sea and not the normal location markers? Thanks!

2 1

App monitoring - What am I missing??
by Scott A. Davis 27 Nov '15

27 Nov '15

Hello - Trying to set up the apache monitor on the same server where Observium is running (I figured that would be easiest). I can't seem to figure out what I am missing. Sorry for being verbose ... Just need to make sure I am covering all my bases. Any suggestions are appreciated. Version Information *Observium CE* 0.15.6.6430 *OS* Linux 2.6.32-573.8.1.el6.x86_64 [amd64] (CentOS 6.7) *Apache* 2.2.15 *PHP* 5.4.44 *Python* Python 2.6.6 *MySQL* 5.5.45 *SNMP* NET-SNMP 5.5 *RRDtool* 1.3.8 * Copied /opt/observium/scripts/observium_agent_xinetd -> /etc/xinetd.d/ [root@zen xinet.d]# ls -la observium_agent_xinetd -rw-r--r-- 1 root root 650 Nov 26 18:33 observium_agent_xinetd * Copied /opt/observium/scripts/observium_agent -> /usr/bin [root@zen bin]# ls -la observium_agent -rwxrwxrwx 1 root root 12K Nov 26 18:31 observium_agent* * Made directories: mkdir /usr/lib/observium_agent /usr/lib/observium_agent/local * Copied /opt/observium/scripts/agent-local/apache -> /usr/lib/observium_agent/local [root@zen local]# ls -la total 64K drwxr-xr-x 2 root root 4.0K Nov 26 17:46 ./ drwxr-xr-x 3 root root 4.0K Nov 26 17:43 ../ -rwxrw-rw- 1 1000 1000 2.9K Nov 26 18:31 apache* -rwxrw-rw- 1 1000 1000 51K Nov 26 19:12 mysql* * Edited /etc/xinetd.d/observium_agent_xinetd only_from = 127.0.0.01 ::1 (Also added my reap IPv4 address to that line for good posterity) * Made sure I had port 33602 open on the firewall (and even disabled firewall at times) service xinetd restart [root@zen conf]# service xinetd restart Stopping xinetd: [ OK ] Starting xinetd: [ OK ] * _httpd.conf says:_ ExtendedStatus On <Location /server-status> SetHandler server-status Order deny,allow Deny from all Allow from 127.0.0.1 Allow from ::1 Allow from <my real IPv4 address> Allow from <my home address> </Location> I can access that just fine. * Ensured the agent port setting in Device Settings->Agent was correct * Ensured the unix-agent module was enabled in Settings->Modules What am I missing? Help. Thank you!!

2 2

GeoLocation not correct
by Scott A. Davis 26 Nov '15

26 Nov '15

Hi - Not sure if this is an Observium issue or not, but in all the time I've used the community version, I've never had this problem. My screen shot is here: http://imgur.com/D9waqhG I have 3 servers. Two in TX, which show up accurately, and one in Atlanta, which shows up in the middle of the Atlantic ocean. Observium shows its location as "Unknown" my snmpd.conf is as follows (with XXXXX marking non-relevant info) syslocation Atlanta, Georgia rocommunity XXXXXX sysname tsundoku.XXXXXXX.XXX syscontact scott.a.davis(a)gmail.com I have other servers with similar snmpd.conf on that map showing up fine. For syslocation, I have also tried Atlanta, Atlanta, GA, etc ... Nothing changes. Any reason why this would happen? Any suggestions would be appreciated. Thanks in advance!

2 2

Custom OIDs are fantastic
by Tim Vaughan 26 Nov '15

26 Nov '15

Just wanted to say thankyou for adding support for Custom OIDs. Using a combination of this article http://www.maartenmoerman.nl/?p=649 and this one http://awesomeadmin.blogspot.co.uk/2009/11/monitoring-cisco-wireless-contro… I was able to add graphs to track how many clients are on each of our individual access points. So far I think it's working, even if it is a pain to calculate which AP MAC address translates to which OID....

3 8

dell UPS and PDU
by BROSSEAU Benoit 26 Nov '15

26 Nov '15

Hello, We are a new observium customer and we are trilled with what we see. Our instance just detected about everything on our pretty extensive network BUT we have a couple of items showing up as GENERIC DEVICE thoses are Dell 6606 PDU and Dell 10000w UPS. Since the pdu are just rebranded APC and the UPS rebranded EATON is there a way to make thoses work ? thanks

2 1

enquiry about invoice
by Ankit Dubey 26 Nov '15

26 Nov '15

Hi, Please let me know - will I get an invoice when I will pay to get the subscription as that invoice will be required for reimbursement of invoice amount from my organization. Best regards Ankit Dubey ________________________________ This E-Mail may contain Confidential and/or legally privileged Information and is meant for the intended recipient(s) only. If you have received this e-mail in error and are not the intended recipient/s, Kindly notify the sender and then delete this e-mail immediately from your system. You are also hereby notified that any use, any form of reproduction, dissemination, copying, disclosure, modification, distribution and/or publication of this e-mail, its contents or its attachment/s other than by its intended recipient/s is strictly prohibited and may be unlawful. Internet Communications cannot be guaranteed to be secure or error-free as information could be delayed, intercepted, corrupted, lost, or contain viruses. Sistema Shyam Teleservices Limited does not accept any liability for any errors, omissions, viruses or computer problems experienced by any recipient as a result of this e-mail.

2 1

Custom Contacts
by lom＠digitelitalia.com 26 Nov '15

26 Nov '15

How to associate a custom contact in an alert checker? I create the contacts, but I don't know how to associate to an alert checker. I'm using Professional version, upgraded from SVN at 7221 release. Thank you. digitel Ing. Lorenzo Mainardi Via della Fortezza 6 - 50129 Firenze <http://www.digitelitalia.com/> www.digitelitalia.com - 800 901 669 Tel +39 055 4624933 Fax +39 055 4624 947 lom(a)digitelitalia.com <mailto:lom@digitelitalia.com>

2 1

Contacts / Alert Checks
by Spencer Ryan 26 Nov '15

26 Nov '15

I see I can create custom contacts, but I don't see a way to associate an alert check to that contact. Am I just missing this? I saw an old post from adam saying there was no way to do it in the UI but that was a few months ago. I'd really like to define a destination email address for specific alert checks in our use case. Any help? *Spencer Ryan* | Senior Systems Administrator | sryan(a)arbor.net *Arbor Networks* +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com

7 10

MySQL application
by Geoff Johnson 25 Nov '15

25 Nov '15

The instructions for configuring the MySQL application at https://observium.org/w/Application/MySQL are unclear about where the database user must be created. Do the user create steps need to be done on every host running MySQL that you want to monitor, or just once on the Observium server? I assume that it's the former, just looking for clarification. Thanks, Geoff

3 6

Lot of DB errors
by Bastiaan Topper 24 Nov '15

24 Nov '15

Hi, I receive a lot of DB errors on my Observium server every polling interval. [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10471' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10471') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10472' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10472') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10473' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10473') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10474' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10474') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10476' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10476') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10477' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10477') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10478' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10478') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10480' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10480') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10481' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10481') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10482' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10482') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10484' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10484') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10485' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10485') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10486' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10486') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10488' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10488') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10489' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10489') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10490' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10490') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10491' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10491') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10493' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10493') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10494' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10494') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '10495' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('10495') [2015/11/22 13:11:31 +0100] poller.php(14640): Failed dbQuery (#1062 - Duplicate entry '67419' for key 'PRIMARY'), Query: INSERT INTO `alert_table-state` (`alert_table_id`) VALUES ('67419') Every 5 minutes I have thousands of these errors in my error log (db.log in the observium logs folder). What could cause this? And how can I troubleshoot this? I already tried to delete a few from the mentioned entries from the database, but it recreates them and still returns the errors. Almost all errors are for the alert_table-state table. Thanks and regards, Bastiaan

6 15

Debugging rsyslog
by Tim Vaughan 24 Nov '15

24 Nov '15

I have a number of devices on separate VLANs to my Observium server. They are configured to send their logs via syslog to Observium. I have firewall rules in place on our router to allow this traffic between VLANs and I can see the traffic being passed in firewall logs. However, the log messages never seem to make it into Observium. How can I go about debugging rsyslog to see whether the logs arrive correctly at the server and are correctly processed by rsyslogd?

1 0

PHP Weathermap
by Serghei Golipad 24 Nov '15

24 Nov '15

Guys, Anyone minds sharing Observium version of Weathermap please? Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. Kelway (UK) Ltd is a Company registered in England and Wales. This email is sent for and on behalf of Kelway Holdings Limited. Kelway Holdings Limited is the UK holding company for Kelway (UK) Limited trading as Kelway. The registered office for Kelway Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than Kelway or the sender of its existence. For more information about Kelway please visit www.kelway.co.uk

3 3

Dlink DES-1210-28
by Support 24 Nov '15

24 Nov '15

Hi, we have added a brand new Dlink (DES 1210-28) under monitor with last release of Observium (update just yesterday) the discover is ok but the data of interfaces (packets, bandwith, etc..) is not collect the devices is been delete e added more times any ideas? saluti, Giuseppe Caputo _____________________________________________________________________ NUCKLEO Information Technology Solutions Support & Delivery Team http://www.nuckleo.com _____________________________________________________________________

1 0

upgrade community version to paid version
by Ankit Dubey 23 Nov '15

23 Nov '15

Hi, I have installed community version and wish to upgrade it to paid version. What is the process? Do I need to provide internet connectivity to already installed server which is having community version and there is some process to upgrade the same to paid version directly? Best regards Ankit Dubey Lead, Packet Core Planning Division Network, CORPORATE CENTER ________________________________ This E-Mail may contain Confidential and/or legally privileged Information and is meant for the intended recipient(s) only. If you have received this e-mail in error and are not the intended recipient/s, Kindly notify the sender and then delete this e-mail immediately from your system. You are also hereby notified that any use, any form of reproduction, dissemination, copying, disclosure, modification, distribution and/or publication of this e-mail, its contents or its attachment/s other than by its intended recipient/s is strictly prohibited and may be unlawful. Internet Communications cannot be guaranteed to be secure or error-free as information could be delayed, intercepted, corrupted, lost, or contain viruses. Sistema Shyam Teleservices Limited does not accept any liability for any errors, omissions, viruses or computer problems experienced by any recipient as a result of this e-mail.

3 2

Arista "sensors" module taking a very long time
by Spencer Ryan 23 Nov '15

23 Nov '15

I'm hoping the answer isn't "make arista fix their SNMP engine" Polling a 7280 (64 ports of 10G) takes about 180 second, with 99% of that time in the sensors module. Running it in debug I see a lot of stalls, and this effectively repeating CMD[/usr/bin/snmpget -v2c -c *** -Pu -OUqnv -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':' core-1.aa.it.arbor.net':'161' aristaEntSensorThresholdHighWarning] EXITCODE[1] CMD RUNTIME[0.005s] STDOUT[ ] STDERR[ aristaEntSensorThresholdHighWarning: Unknown Object Identifier (Sub-id not found: (top) -> aristaEntSensorThresholdHighWarning) ] SNMP_STATUS[FALSE] SQL[SELECT * FROM `snmp_errors` WHERE `device_id` = '96' AND `error_code` = '1002' AND `snmp_cmd` = 'snmpget' AND `snmp_options` = '-OUqnv' AND `mib` = 'SNMPv2-MIB' AND `oid` = 'aristaEntSensorThresholdHighWarning';] SQL RUNTIME[0.00026798s] SQL[UPDATE `snmp_errors` set `error_count` ='471101',`updated` ='1448318766' WHERE `error_id` = '802'] SQL RUNTIME[0.00107193s] Array ( [sensor_value] => ) [RRD Disabled - update /opt/observium/rrd/ core-1.aa.it.arbor.net/sensor-power-entity-sensor-100315212.rrd N:0] Any idea if that's something you can fix? *Spencer Ryan* | Senior Systems Administrator | sryan(a)arbor.net *Arbor Networks* +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com

3 4

Re: [Observium] How to delete ports of devices?
by Tim Toepp 20 Nov '15

20 Nov '15

Chaman, Are they actually down? Meaning not being used? Or are you saying they are being incorrectly reported? So if they are actually down and you are asking how to NOT see the down ports in your listing: when you are on the GUI and you are looking at the Ports of a specific Device, click under Quick Filter you can hide different ports based on their status and one of the option is 'Hide Down'. The downside is that it doesn't retain and I haven't found a system wide setting/preference. If this works for you, what you could do is submit a feature request to make it a global setting not just a Quick Filter. But you really do not want to delete ports that are down as then you'll have to add them later when they become in use. HTH, Tim Date: Wed, 18 Nov 2015 10:32:07 +0530 From: Chaman Rathee <chaman.rathee(a)progression.com> To: 'Observium Network Observation System' <observium(a)observium.org> Subject: [Observium] How to delete ports of devices? Message-ID: <000001d121be$462b9820$d282c860$(a)progression.com> Content-Type: text/plain; charset="us-ascii" Hi Team, I have many ports that are showing down at observium monitoring system. So, please suggest how to delete "Down Ports" in observium. ......... With Best Regards, Chaman Rathee Mob. No:- +91-9560055816 --------------------------------------------------------------------------------------------------------------------- This e-mail and any attachments are from a sender at the Metropolitan School District of Washington Township in Indianapolis, Indiana. They are intended for the named recipients and may contain information that is confidential or privileged under Indiana and Federal Law. Any error in addressing or sending this e-mail is not a waiver of confidentiality and does not consent to copying or distribution of this e-mail or attachments. If you receive this e-mail in error, please notify the sender of the error by return e-mail and delete this e-mail and its attachments. If there is a need to speak to the sender, please call [317] 845-9400 and they can provide you with contact information.

1 0

front page editing
by Josh Bierman 20 Nov '15

20 Nov '15

Hello All, I want to keep the default layout of the front page with one change: replace the map with a traffic graph. When I tried this using the [frontpage][order] line (removed map from order and put in a custom graph, included EVERYTHING else) , the "Devices,Ports,Sensors" table at the top diapered. How do i get it back? Even if the answer is as simple as RTFM-pages #-## that would help. Thanks, Joshua Bierman Director of Technology Yeshivat Noam

3 4

Hoosekeeping Biling/Groups
by Robin Douine 20 Nov '15

20 Nov '15

Hello, We have users who have billing and groups permission but when we launch /opt/observium/housekeeping.php -b, the users loose their rights. It seems the problem is linked to this log : 1 entity entries in tables 'entity_permissions' for non-existing devices will be deleted [y/N]: Indeed, billing and groups doesn't be directly linked to devices. Best regards -- Robin DOUINE

1 1

Monitoring Snom phones
by Tim Vaughan 19 Nov '15

19 Nov '15

Hi, I'm trying to add several Snom 710 phones. The documentation says they will accept SNMP requests (http://wiki.snom.com/Category:HowTo:SNMP). However, I can't add it from Observium even if I enter my installation's IP address as trusted in the phone config. Checking the phone logs after trying to add them, I see: 17/11/2015 11:19:53 [NOTICE] TOOLS: SNMP: Received unknown object identifier 06082b06010201010200 17/11/2015 11:19:53 [NOTICE] TOOLS: SNMP: Received unknown object identifier 06082b06010201010300 17/11/2015 11:20:03 [NOTICE] TOOLS: SNMP: Received unknown object identifier 06082b06010201010200 17/11/2015 11:20:03 [NOTICE] TOOLS: SNMP: Received unknown object identifier 06082b06010201010300 Has anyone managed to get their Snom phones talking to Observium? -- Mobile: 07868246225 Skype: tvaughan Twitter: twitter.com/tvaughan

9 30

Re: [Observium] Who's running Observium on distros that aren't Ubuntu/Debian/RHEL/CentOS?
by T-MONT Administrator 19 Nov '15

19 Nov '15

Hi Guys, My installation is running smoothly on Slackware Linux ver. 14.1 (x86_64). No special, dedicated actions performed to launch Observium beside of manual installation of RRDTool and few requires dependencies. Regards, Pawel On 19.11.2015 01:46, Ciro Iriarte wrote: > 2015-07-25 16:42 GMT-04:00 Adam Armstrong <adama(a)memetic.org>: > >> Hi Guys, >> >> Are any of you running Observium on distros which aren't the ones we >> recommend? >> >> Did you have to do anything special? >> >> I think we're probably way more friendly to non-debian distros now >> that >> we've lost a lot of legacy stuff! >> >> Thanks, >> adam. >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> > Running it on SLES11: > > https://iriarte.it/?p=158&lang=es > > Post can be improved after migration though :D > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

1 0

Setting Location
by Josh Hopper 19 Nov '15

19 Nov '15

Is there a way via command line to set the Location of a device? For example, in the GUI you click on a given device and hover over the Gear in the far right. Then click Properties. Under the Device Settings tab there is a Custom Location. This is the location I would like to set. I ran an SNMP Enabler tool and enabled, set and added 100 devices today to Observium. Rather than set this individually, I was hoping I could do it in bulk via SSH. -- Sincerely, Joshua Hopper, A+ CE Sr. Network Administrator [cid:image001.jpg@01D11BAA.500B4080] 420 3rd Ave NW Hickory NC 28601 Office: 828-449-1839x2160 | Cell: 828-855-7565

9 24

Who's running Observium on distros that aren't Ubuntu/Debian/RHEL/CentOS?
by Adam Armstrong 18 Nov '15

18 Nov '15

Hi Guys, Are any of you running Observium on distros which aren't the ones we recommend? Did you have to do anything special? I think we're probably way more friendly to non-debian distros now that we've lost a lot of legacy stuff! Thanks, adam.

5 6

Fwd: Epmp snmp intergration
by Tim Schroepfer 18 Nov '15

18 Nov '15

Does anyone have the config files to make Observium recognize Cambium Epmp 1000 Radios ?

3 3

UNIX Agent - lmsensor
by Federico Olivieri 18 Nov '15

18 Nov '15

Hi All, Sorry to take your time with this question but I am sure you can help me with that. On Script section of Observium UNIX agetn I found this script for lm sensor #!/bin/bash lmsensors=`which sensors` if [ $? -eq 0 ] then echo '<<<lmsensors>>>' $lmsensors fi On my environment the command for getting CPU temp is "sensor" root@banana:~# sensors fam15h_power-pci-00c4 Adapter: PCI adapter power1: 0.00 W (crit = 25.00 W) nct6776-isa-0290 Adapter: ISA adapter Vcore: +1.03 V (min = +0.00 V, max = +1.74 V) in1: +1.89 V (min = +0.00 V, max = +0.00 V) ALARM AVCC: +3.33 V (min = +0.00 V, max = +0.00 V) ALARM +3.3V: +3.34 V (min = +0.00 V, max = +0.00 V) ALARM in4: +0.73 V (min = +0.00 V, max = +0.00 V) ALARM in5: +1.71 V (min = +0.00 V, max = +0.00 V) ALARM 3VSB: +3.44 V (min = +0.00 V, max = +0.00 V) ALARM Vbat: +3.28 V (min = +0.00 V, max = +0.00 V) ALARM fan1: 0 RPM (min = 0 RPM) ALARM fan2: 1234 RPM (min = 0 RPM) ALARM fan3: 0 RPM (min = 0 RPM) ALARM fan4: 0 RPM (min = 0 RPM) ALARM fan5: 0 RPM (min = 0 RPM) ALARM SYSTIN: +40.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor CPUTIN: +42.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor AUXTIN: +47.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor cpu0_vid: +0.000 V intrusion0: OK intrusion1: ALARM In order to plot some nice graphs in observiu, how can I integrate that command in that script ? Thanks

2 1

How to delete ports of devices?
by Chaman Rathee 18 Nov '15

18 Nov '15

Hi Team, I have many ports that are showing down at observium monitoring system. So, please suggest how to delete "Down Ports" in observium. ......... With Best Regards, Chaman Rathee Mob. No:- +91-9560055816 [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

6 12

Autodiscovery Question
by Lyndon Labuschagne 18 Nov '15

18 Nov '15

Hi All I have added the below to the config file, but nothing seems to be getting discovered, is there a $config[Œautodiscover¹] = TRUE or something I am missing? $config['autodiscovery']['ip_nets'] = array("10.200.4.0/24", "10.200.1.0/24"); $config['autodiscovery']['xdp'] = TRUE; // Autodiscover hosts via discovery protocols $config['autodiscovery']['snmpscan'] = TRUE; // autodiscover hosts via SNMP scanning $config['discover_services'] = false; ## Autodiscover services via SNMP on devices of type "server"

3 5

Front page custom graphs not displaying as expected
by Josh Bierman 17 Nov '15

17 Nov '15

Hello all, here is the snippet from my config.php ----------------------------------------------------- // Device status settings // Show the status messages you want $config['frontpage']['device_status']['max']['interval'] = 24; // Maximal interval for which to display devices status (in hours) $config['frontpage']['device_status']['max']['count'] = 200; $config['frontpage']['device_status']['uptime'] = true; $config['frontpage']['device_status']['devices'] = true; // Show the down devices $config['frontpage']['device_status']['ports'] = true; // Show the down ports $config['frontpage']['device_status']['links'] = true; // Show the down inter-device links (with CDP/LLDP linked devices) $config['frontpage']['device_status']['errors'] = true; // Show the ports with interface errors/ $config['frontpage']['device_status']['services'] = true; // Custom traffic graphs $config['frontpage']['custom_traffic']['ids'] = "3697"; // COMMA SEPARATED PORT ID FOR EXAMPLE: "1,2,3,4,5" $config['frontpage']['custom_traffic']['title'] = "Traffic"; // Your own title for the custom traffic graphs // Custom mini graphs $config['frontpage']['minigraphs']['ids'] = "51,device_processor,CPU"; // Comma and semicolon separated array list, first the device id or graph id followed by the image type and the text header you want (example: "2,$ $config['frontpage']['minigraphs']['legend'] = false; // Enable/Disable the legend on custom mini graph view $config['frontpage']['minigraphs']['title'] = "Mini Graphs Overview"; -------------------------------------------------- Based on that config I would expect graphs for 4 ports, showing 24 hour time periods on each, and a mini graph underneath showing CPU usage on that device (its a fortinet firewall) Instead I see this: [image: Inline image 1] Traffic graphs for one port, three timescales and no CPU. What did I do wrong? version 0.15.11.7197 Joshua Bierman Director of Technology Yeshivat Noam 201-261-1919 x136

1 0

Question about Map Locations, Geocoding and SNMP
by Ximena Cardinali 17 Nov '15

17 Nov '15

Hello There, Here's the situation: Last week we changed our Geocoding API to yandex, just for the sake of testing. After that, our map Locations looked really funny. Then, we changed back to mapquest and now our map shows just the Atlantic Ocean. Before that, we had no Geocoding API on our Observium config. Our Locations were all being retrieved from the SNMP Config (sysLocation) from all our devices. I also tried with "$config['geocoding']['enable'] = FALSE;" and with "$config['location_menu_geocoded'] = FALSE;" but I still get the ocean. So here's my stupid question: How can I go back to our first Status, where all Locations are retrieved per SNMP without Geocoding and our Map shows back the Devices as we had in the Setup? Thanks! --- *Ximena E. Cardinali *| Linux SysAdmin

3 4

Pushover Setup
by Daniel Wandrei 16 Nov '15

16 Nov '15

Hello, how do I setup Pushover Alerting? When adding a Contact and selecting Pushover, I'm missing the relevant Options like User Key and Application Token. Maybe I'm blind or my Installation is f*cked up but I can't find the needed the needed Fields: [cid:image001.png@01D1204B.47DC9710] Mit freundlichen Grüßen aus Rheine / Best regards from Rheine Daniel Wandrei Systemadministrator Shaghafi GmbH Kanalstraße 97 | 48432 Rheine Tel. +49 (0) 5971 899086-303 Fax +49 (0) 5971 899086-149 Internet: www.shaghafi.de<http://www.shaghafi.de/> E-Mail: daniel.wandrei(a)shaghafi.de<mailto:daniel.wandrei@shaghafi.de> Geschäftsführer: Parham Shaghafi Amtsgericht Steinfurt Nr. 4620 USt-ID-Nr: DE 206292649 Haftungssausschluss/Disclaimer: Diese Nachricht enthält vertrauliche Informationen und ist ausschließlich für den Adressaten bestimmt. Jeder Gebrauch durch Dritte ist verboten. Falls Sie die Daten irrtümlich erhalten haben, nehmen Sie bitte Kontakt mit dem Absender auf und löschen Sie die Daten auf jedem Computer und Datenträger. Das unerlaubte Kopieren, sowie die unbefugte Weitergabe dieser Mail sind nicht gestattet. Die Shaghafi GmbH ist nicht verantwortlich für die ordnungsgemäße, vollständige oder verzögerungsfreie Übertragung dieser Nachricht.

4 4

New Observium install showing text where PHP should be?
by linuxthefish 16 Nov '15

16 Nov '15

Hi, I've just followed the Observium install instructions and I have a strange issue with Observium's PHP files. I'm not sure if this is an Apache issue as I don't use Apache and installed it as the instructions said, but I created a phpinfo file and it ran fine! This was first seen with the Subscription edition, but I've removed that and tried the community edition with the same problems. the issue is that observium is showing a file that starts with the following in my browser: <?php /** * Observium * * This file is part of Observium. * * @package observium * @subpackage webinterface * @author Adam Armstrong <adama(a)memetic.org> * @copyright (C) 2006-2015 Adam Armstrong * */ Thanks, Edmund

2 1

UNIX-Agent on remote client
by Federico Olivieri 16 Nov '15

16 Nov '15

Hi All I have a server that is running Observium with Unix Agent and everything is ok. Recently I installed a second remote server and is a SNMP client on my observium. Because this server is running Power DNS I would enable the UNIX-AGENT om this client and see the graphs for pdns on my Observium. Can anyone assist me on this? Thank You very much Federico

3 5

Hangs up on polling of device for long time..........!
by Chaman Rathee 15 Nov '15

15 Nov '15

Hi Team, During polling of devices, it hangs up on one device and not exceed for next device. Please suggest. [cid:image001.png@01D11BAB.33B1C160] ......... With Best Regards, Chaman Rathee Mob. No:- +91-9560055816 [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

7 18

Does per-user permission exist in LDAP?
by Cody Cook 15 Nov '15

15 Nov '15

Now that I'm LDAP authenticating to my domain, am I completely restricted to using auth_ldap_groups to set permissions? In the UI, I can go to User > Edit Users, drop down the list to see my domain users, but when I try to apply changes to these users (setting Global Read, or Normal user), I am redirected to the Observium User Management screen with no visible changes to any user account. There's no notification to tell me what went wrong or that editing LDAP user permissions is not possible. After switching to LDAP, Observium no longer provides authentication errors, and I'm getting something to the same effect when trying to edit users. Clicking on a user in my level 10 shows me that this user is an administrator, but users in my level 1 are showing disabled. The drop down list shows the same level 10 users as disabled as well. /debug doesn't help since it reloads the page. profile_sql doesn't seem to show me every SQL query being made. Observium 0.15.11.7173 (rolling)

5 7

Re: [Observium] observium Digest, Vol 61, Issue 74
by Marko Uusitalo 13 Nov '15

13 Nov '15

unsubscribe Marko Uusitalo Senior Lecturer Helsinki Metropolia University of Applied Sciences Bulevardi 31 00180 HELSINKI FINLAND GSM +358 50 3525 975 Email Marko.uusitalo(a)metropolia.fi www.metropolia.fi/en ________________________________________ Lähettäjä: observium [observium-bounces(a)observium.org] käyttäjän observium-request(a)observium.org [observium-request(a)observium.org] puolesta Lähetetty: 12. elokuuta 2015 9:50 Vastaanottaja: observium(a)observium.org Aihe: observium Digest, Vol 61, Issue 74 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: 'Duplicate entry' issues on vlans_fdb (Aaron Mayfield) ---------------------------------------------------------------------- Message: 1 Date: Wed, 12 Aug 2015 06:50:01 +0000 From: Aaron Mayfield <amayfield(a)artisaninfrastructure.com> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] 'Duplicate entry' issues on vlans_fdb Message-ID: <f42b01e9c6a44b1783eb4bc895f324f9(a)NG-USA-MXAI.neverfailgroup.com> Content-Type: text/plain; charset="utf-8" Yeah this seems to be a performance issue of some type and the fdb table stuff seems like a side effect. I?m scratching my head as to why it worked fine before the upgrade. In fact, here is the observium.log output before/after the upgrade: [2015/08/11 10:42:14 -0500] poller-wrapper.py(23384): /opt/observium/poller-wrapper.py: polled 45 devices in 131 seconds with 8 workers [2015/08/11 10:47:12 -0500] poller-wrapper.py(3121): /opt/observium/poller-wrapper.py: polled 45 devices in 131 seconds with 8 workers [2015/08/11 10:52:13 -0500] poller-wrapper.py(15078): /opt/observium/poller-wrapper.py: polled 45 devices in 132 seconds with 8 workers [2015/08/11 10:57:13 -0500] poller-wrapper.py(27618): /opt/observium/poller-wrapper.py: polled 45 devices in 131 seconds with 8 workers [2015/08/11 11:02:14 -0500] poller-wrapper.py(7205): /opt/observium/poller-wrapper.py: polled 45 devices in 132 seconds with 8 workers [2015/08/11 11:07:14 -0500] poller-wrapper.py(19611): /opt/observium/poller-wrapper.py: polled 45 devices in 132 seconds with 8 workers [2015/08/11 11:12:12 -0500] poller-wrapper.py(31781): /opt/observium/poller-wrapper.py: polled 45 devices in 131 seconds with 8 workers [2015/08/11 11:17:15 -0500] poller-wrapper.py(11383): /opt/observium/poller-wrapper.py: polled 45 devices in 133 seconds with 8 workers [2015/08/11 11:22:15 -0500] poller-wrapper.py(23688): /opt/observium/poller-wrapper.py: polled 45 devices in 133 seconds with 8 workers [2015/08/11 11:27:14 -0500] poller-wrapper.py(3412): /opt/observium/poller-wrapper.py: polled 45 devices in 133 seconds with 8 workers [2015/08/11 11:32:10 -0500] poller-wrapper.py(15327): /opt/observium/poller-wrapper.py: polled 45 devices in 128 seconds with 8 workers [2015/08/11 11:37:14 -0500] poller-wrapper.py(27814): /opt/observium/poller-wrapper.py: polled 45 devices in 132 seconds with 8 workers [2015/08/11 11:42:13 -0500] poller-wrapper.py(7491): /opt/observium/poller-wrapper.py: polled 45 devices in 132 seconds with 8 workers [2015/08/11 11:47:13 -0500] poller-wrapper.py(19987): /opt/observium/poller-wrapper.py: polled 45 devices in 131 seconds with 8 workers [2015/08/11 11:52:15 -0500] poller-wrapper.py(32100): /opt/observium/poller-wrapper.py: polled 45 devices in 133 seconds with 8 workers [2015/08/11 11:57:14 -0500] poller-wrapper.py(11743): /opt/observium/poller-wrapper.py: polled 45 devices in 133 seconds with 8 workers [2015/08/11 12:02:22 -0500] poller-wrapper.py(23906): /opt/observium/poller-wrapper.py: polled 45 devices in 140 seconds with 8 workers [2015/08/11 12:06:52 -0500] poller-wrapper.py(4395): /opt/observium/poller-wrapper.py: polled 45 devices in 111 seconds with 8 workers [2015/08/11 12:21:24 -0500] poller-wrapper.py(11770): /opt/observium/poller-wrapper.py: polled 45 devices in 683 seconds with 8 workers [2015/08/11 12:38:09 -0500] poller-wrapper.py(17020): /opt/observium/poller-wrapper.py: polled 45 devices in 1388 seconds with 8 workers [2015/08/11 12:48:30 -0500] poller-wrapper.py(26555): /opt/observium/poller-wrapper.py: polled 45 devices in 1708 seconds with 8 workers [2015/08/11 13:06:30 -0500] poller-wrapper.py(2438): /opt/observium/poller-wrapper.py: polled 45 devices in 2487 seconds with 8 workers [2015/08/11 13:12:30 -0500] poller-wrapper.py(9984): /opt/observium/poller-wrapper.py: polled 45 devices in 2548 seconds with 8 workers [2015/08/11 13:31:56 -0500] poller-wrapper.py(19437): /opt/observium/poller-wrapper.py: polled 45 devices in 3414 seconds with 8 workers [2015/08/11 13:40:50 -0500] poller-wrapper.py(25290): /opt/observium/poller-wrapper.py: polled 45 devices in 3647 seconds with 8 workers [2015/08/11 13:55:34 -0500] poller-wrapper.py(956): /opt/observium/poller-wrapper.py: polled 45 devices in 4231 seconds with 8 workers [2015/08/11 14:02:54 -0500] poller-wrapper.py(7354): /opt/observium/poller-wrapper.py: polled 45 devices in 4370 seconds with 8 workers [2015/08/11 14:20:50 -0500] poller-wrapper.py(14288): /opt/observium/poller-wrapper.py: polled 45 devices in 5147 seconds with 8 workers I did the upgrade and then the poller starts running poorly. Then I see the side effect of the of the duplicate entries with the fdb table because the poller processes are running so slowly they are stacking on top of each other. So I have some kind of performance issue. One strange thing, I only have 45 devices I?m polling, yet the port count under the Port menu says I have 44859 ports. That must be a miscalculation of some type or my database is messed up somewhere. Not sure if related or not. Going to continue to try the poller manually and see if I can figure out where the slowdown is. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Wednesday, August 12, 2015 1:33 AM To: observium(a)observium.org Subject: Re: [Observium] 'Duplicate entry' issues on vlans_fdb Man, why didn't I think of this? This sounds like the problem. I guess something caused your poller processes to get confused, and they ended up running in parallel, not unthinkable when the same part of the poller process runs for so long, 74 seconds for the fdb-table module. If you don't /really/ need this data, I'd recommend disabling it. It's one of the trade offs we have to make between performance and data. If you still want the fdb data, you can force that module to be run using a less-often scheduled process in cron like ./poller.php -h all -m fdb-table Note that this will break whatever graphs (fdb count?) that fdb-table produces, but you'll still have the data in the database. adam. On 12/08/2015 07:28:55, Tom Laermans <tom.laermans(a)powersource.cx<mailto:tom.laermans@powersource.cx>> wrote: If you're running multiple simultaneous pollers against the same device is not unthinkable they'll all be trying to insert the same data into the table... Tom On Aug 12, 2015 8:02 AM, Aaron Mayfield wrote: > > Here is the requested output. I had to kill all the other poller processes running on the system to get it to run (they were hosing the CPU). Oddly enough, once I killed all the other processes, I didn?t any problems running it (back to being fast). Also don?t seem to be getting the errors in the db.log when running the poller ?one-at-a-time?. > > > > > > > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong > Sent: Tuesday, August 11, 2015 11:52 PM > To: observium(a)observium.org<mailto:observium@observium.org> > Subject: Re: [Observium] 'Duplicate entry' issues on vlans_fdb > > > > Hi Aaron, > > > > These seem to be gone from my db.log. Could you send me a ./poller.php -h 54 -m fdb-table -d ? > > > > Thanks, > > adam. >> >> On 12/08/2015 05:01:53, Aaron Mayfield wrote: >> >> Just today I updated to the latest and greatest (0.15.8.6882). I was several revisions behind and several database updates were done as a result. After the update, I noticed my poller.php processes started taking all the CPU, started getting gaps in the graphs, etc. I noticed thousands of these entries in db.log: >> >> >> [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2083-6ef88537f91f' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2083','220115','6ef88537f91f','learned') >> [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2084-005056a927c2' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2084','220115','005056a927c2','learned') >> [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2084-a66aaf0bf4cc' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2084','220115','a66aaf0bf4cc','learned') >> [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2085-228a3d193c66' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2085','220115','228a3d193c66','learned') >> [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2086-0ee7c729643b' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2086','220115','0ee7c729643b','learned') >> >> If I run a poller process against a switch manually, everything seems to run fine with the exception of the fdb-table module, which is taking over 600 seconds to run. >> >> Here is the schema of my vlans_fdb file: >> >> mysql> show columns from vlans_fdb >> -> ; >> +-------------+-------------+------+-----+---------+-------+ >> | Field | Type | Null | Key | Default | Extra | >> +-------------+-------------+------+-----+---------+-------+ >> | device_id | int(11) | NO | PRI | NULL | | >> | vlan_id | int(11) | NO | PRI | NULL | | >> | port_id | int(11) | YES | MUL | NULL | | >> | mac_address | varchar(32) | NO | PRI | NULL | | >> | fdb_status | varchar(32) | NO | | NULL | | >> +-------------+-------------+------+-----+---------+-------+ >> 5 rows in set (0.00 sec) >> >> mysql> >> mysql> show index from vlans_fdb >> -> ; >> +-----------+------------+--------------+--------------+-------------+-----------+-------------+---- ----+--------+------+------------+---------+ >> | Table | Non_unique | Key_name | Seq_in_index | Column_name | Collation | Cardinality | Sub art | Packed | Null | Index_type | Comment | >> +-----------+------------+--------------+--------------+-------------+-----------+-------------+---- ----+--------+------+------------+---------+ >> | vlans_fdb | 0 | dev_vlan_mac | 1 | device_id | A | 15 | ULL | NULL | | BTREE | | >> | vlans_fdb | 0 | dev_vlan_mac | 2 | vlan_id | A | 18348 | ULL | NULL | | BTREE | | >> | vlans_fdb | 0 | dev_vlan_mac | 3 | mac_address | A | 128440 | ULL | NULL | | BTREE | | >> | vlans_fdb | 1 | device_id | 1 | device_id | A | 78 | ULL | NULL | | BTREE | | >> | vlans_fdb | 1 | port_id | 1 | port_id | A | 431 | ULL | NULL | YES | BTREE | | >> +-----------+------------+--------------+--------------+-------------+-----------+-------------+---- ----+--------+------+------------+---------+ >> 5 rows in set (0.04 sec) >> >> mysql> >> >> Does my table structure look right? I see someone else on the list has had this same issue, but there is no indication that this should be a problem in the latest version. >> >> What should I check? Thanks for any help. >> >> >> >> >> Aaron Mayfield >> Cloud Expert >> Networking Specialist >> >> 12400 Hwy. 71 W. Suite 350-407 >> Austin, TX 78738 >> T. 512.600.4297 >> www.artisaninfrastructure.com<http://www.artisaninfrastructure.com> >> Partner portal: https://portal.vpdc.us >> Partner support: support(a)artisaninfrastructure.com<mailto:support@artisaninfrastructure.com> >> >> >> >> This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. Please note that any views or opinions present in this email are solely those of the author and do not necessarily represent those of the company. Finally the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. (Proprietary & Confidential ? Artisan Infrastructure, Inc. et all.) >> _______________________________________________ >> observium mailing list >> observium(a)observium.org<mailto:observium@observium.org> >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. Please note that any views or opinions present in this email are solely those of the author and do not necessarily represent those of the company. Finally the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. (Proprietary & Confidential ? Artisan Infrastructure, Inc. et all.) _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. Please note that any views or opinions present in this email are solely those of the author and do not necessarily represent those of the company. Finally the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. (Proprietary & Confidential ? Artisan Infrastructure, Inc. et all.)

1 0

What boolean operators are available when creating groups ?
by Jesper Frank Nemholt 11 Nov '15

11 Nov '15

Hi! I've been using equals and match and wildcard (*) when aggregating together data in the group feature, however I now have to create a group where I need to exclude certain things and select others with wildcard. I am not sure this works, and I can't find anything in the documentation about it. basically I need to include all hosts with a certain hostname pattern, except a few ones with a slightly different pattern. If I wrote it in two lines, it would be like this : hostname match foo-is*.bar.com hostname != foo-is4*.bar.com Anyway way to do this ? /Jesper

3 2

Updating SNMP from v1 to v3
by Timothy Kaufman 11 Nov '15

11 Nov '15

Hello, We have about 80 devices that we are updating from SNMP v1 to v3. I can¹t seem to find a way to do this in bulk either from CLI or from web UI. I can update the devices one by one in the web ui, if I try from the CLI with the add_user.php script it complains about the device being known. Can someone offer some insight on how I might accomplish this without changing each device individually in the UI? Thanks Tim

2 1

Port Descriptions on Linux hosts?
by Telsin 10 Nov '15

10 Nov '15

I’ve got someRHEL boxes running as routers in Observium, and I’m wondering how to apply names to them so they get picked up as Transit, Peering, Customer, etc. Any solution for this? Thanks! -Darrell

1 0

ports graphs errors
by Jeffrey d'Ambly 10 Nov '15

10 Nov '15

I’m seeing something odd with my Cisco ASA, for some reason the ports summary graph isn’t working. What is odd is that each of the individual interfaces are working fine. It looks like there is something wrong with the RRD command, how can I fix this? RRDTool Output: ERROR: String ends after the = sign on 'CDEF:inB=' Total time: 0.017 | RRDtool time: 0.015s RRDTool Command rrdtool graph /tmp/WyzPqJz6C3QdevQB.png -g --alt-autoscale --rigid --start 1447085684 --end 1447172084 --width 1159 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DejaVuSansMono' --font AXIS:7:'DejaVuSansMono' --font-render-mode normal -E CDEF:inB= CDEF:outB= CDEF:octets=inB,outB,+ CDEF:doutB=outB,-1,* CDEF:inbits=inB,8,* CDEF:outbits=outB,8,* CDEF:bits=inbits,outbits,+ CDEF:doutbits=doutB,8,* VDEF:95thin=inbits,95,PERCENT VDEF:95thout=outbits,95,PERCENT VDEF:d95thout=doutbits,5,PERCENT VDEF:totin=inB,TOTAL VDEF:avein=inbits,AVERAGE VDEF:totout=outB,TOTAL VDEF:aveout=outbits,AVERAGE VDEF:tot=octets,TOTAL COMMENT:' \l' HRULE:999999999999999#FFFFFF:'Total Rx': GPRINT:inbits:LAST:%6.2lf%s GPRINT:inbits:AVERAGE:%6.2lf%s GPRINT:inbits:MIN:%6.2lf%s GPRINT:inbits:MAX:%6.2lf%s GPRINT:totin:%6.2lf%sB COMMENT:'\l' HRULE:999999999999999#FFFFFF:' Tx': GPRINT:outbits:LAST:%6.2lf%s GPRINT:outbits:AVERAGE:%6.2lf%s GPRINT:outbits:MIN:%6.2lf%s GPRINT:outbits:MAX:%6.2lf%s GPRINT:totout:%6.2lf%sB COMMENT:'\l' HRULE:999999999999999#FFFFFF:' Agg': GPRINT:bits:LAST:%6.2lf%s GPRINT:bits:AVERAGE:%6.2lf%s GPRINT:bits:MIN:%6.2lf%s GPRINT:bits:MAX:%6.2lf%s GPRINT:tot:%6.2lf%sB COMMENT:'\l' HRULE:0#999999 RRDTool Files Used No RRD information returned. This may be because the graph module doesn't yet return this data.

2 2

Slack Integration
by Guilherme de Freitas Figueiredo 10 Nov '15

10 Nov '15

Hello! on the directory alerts exists the slack.inc.php. directory in the alerts there is slack.inc.php. researched on the Internet (http://www.rickheil.com/?p=35#comment-39) and also in the full dump of the observium config file and saw that there are integration options with the slack. I tried to apply them but without success. someone already managed to do this integration? Below are the configs: $config['alerts']['slack']['username'] = "Observium"; $config['alerts']['slack']['channel'] = "#cgr"; $config['alerts']['slack']['url'] = " https://hooks.slack.com/services/T0BMNB4UC/B0BMU32QY/xeUSiseEo2qGlXKOACLR5Z… "; $config['alerts']['slack']['webhook_url'] = " https://hooks.slack.com/services/T0BMNB4UC/B0BMU32QY/xeUSiseEo2qGlXKOACLR5Z… "; $config['alerts']['slack']['default']['contact'] = "channel::#cgr||username::Observium||url:: https://hooks.slack.com/services/T0BMNB4UC/B0BMU32QY/xeUSiseEo2qGlXKOACLR5Z… "; Best Regards! []s! -- Guilherme de Freitas Figueiredo

3 4

Re: [Observium] OSPF nei alerts
by Samarasinghe, Sujith 09 Nov '15

09 Nov '15

Team, can we not use the ospf neighbor counts -1 to trigger a alert? Sujith. Confidentiality Note: This e-mail and any attachments are confidential and may be protected by legal privilege. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation.

2 2

Active Directory help
by Cody Cook 09 Nov '15

09 Nov '15

Hi everyone, I know this subject is touched on in the past but any help from anyone who has this working would be appreciated. I've been following the FAQ for LDAP login via Active Directory but I always come across the same error. Fatal error: LDAP TLS required but not successfully negotiated [Connect error] In /debug, I see that it connects but then inserts a line saying that Auth failed. https://doc.rotten.soy/buqar.vhdl In my Windows Server 2012 R2 box, I see this line come up in the Event Viewer: "A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 10." This is one of the more recent configs I've tried. https://doc.rotten.soy/wosej.php My filtered dsquery information is... https://doc.rotten.soy/inure.tex Things I've tried modifying: auth_ldap_binddn, I've tried changing this but this doesn't seem to be my problem since it appears to connect. (Should I have some kind of special rights for this user)? auth_ldap_suffix, This one I'm not sure exactly what the string is looking for. The actual CN of a user won't include the CN=Builtin. I've tried without. auth_ldap_group, tried with and without Domain Users CN. auth_ldap_groups, tried the full LDAP path and also just the "Domain Admins"/"Domain Users" What am I missing? :( Any help is greatly appreciated in what I am doing wrong. Is it a problem with my Server 2012 install and something I need to change? Is it a problem in one of the packages installed for Observium? Cody

1 1

SVN Password
by Robbie Wright 09 Nov '15

09 Nov '15

My SVN password is no longer working. How do we tell if a subscription has expired? Do we get a notice when they do expire? Robbie Wright Siuslaw Broadband <https://siuslawbroadband.com> 541-902-5101

2 2

menu css error
by Simon Smith 09 Nov '15

09 Nov '15

Hi All, not sure if this is a CSS error or a STUPID IE error we leave observium running on a windows 7 IE 11 computer for monitoring reasons however when i however over the menus, the styling is small and wrong! attached screenshot showing what i mean regards Simon - Hestor Ltd

4 6

Adding MiBs to Observium
by Oliver Marshall 09 Nov '15

09 Nov '15

Hi all What's the best way to add MiBs to Observium? Specifically I want to support HP MSM 760 WiFi controllers and also Smoothwall firewalls. Olly

3 8

OSPF alerts from Observium syslogs
by Samarasinghe, Sujith 08 Nov '15

08 Nov '15

Hi , Did anyone succeeded triggering alerts through Observium syslog? Thanks, Sujith. Confidentiality Note: This e-mail and any attachments are confidential and may be protected by legal privilege. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation.

1 0

Setting up email alert notifications
by Alex Winder ＠ M5i 07 Nov '15

07 Nov '15

Hi, I'm looking to set up alert notifications to help with the monitoring of the devices which we already have loaded into Observium, but having some trouble. See below attached image. This is how I currently have alert checkers set. As you can see there are 0 entities being loaded into all alert checks, despite using all devices, and I can't find anything about how to get entities to load. Could someone assist me in how to successfully set up the notifications? We have over 200 devices being monitored in Observium, adding email notifications would improve the system dramatically for us. Regards, Alex.

2 2

Adding device IPs rather than hostnames
by Oliver Marshall 06 Nov '15

06 Nov '15

Is it possible to allow an IP for a device to be entered in to the Add Device screen rather than requiring a hostname? Olly

3 3

RANCID Integration with RHEL
by Johnson, Edward A. 06 Nov '15

06 Nov '15

I’m trying to install RANCID on Observium using the doc http://www.observium.org/docs/rancid/. I get as far as Run this command to create the folder structure: su - rancid /var/lib/rancid/bin/rancid-cvs but get -bash: /var/lib/rancid/bin/rancid-cvs: No such file or directory Is there a different directory when running Observium on RHEL that I should be using to create the folder structure?

3 6

BlueWalker/PowerWalker EPPC UPS
by Glyn Parker 06 Nov '15

06 Nov '15

Hei, I have an BlueWalker (Powerwalker) UPS and added support for my (VFI2000 LCD) as attached. This should work for all VFIs and others with the same god dam ObjectID of .1.3.6.1.4.1.935.10.1 (which should be all EPPC manufactured units). Im not an expert in Observium or all things SNMP, but this was my work. If others find it useful, then great. PS: Dont read this Yes its yet another UPS MIB which EPPC could have done with RFC1628. The unit supports RFC1628 but not enough to be ideal ;( I didnt want to make some bastard mix of both MIBS as that's just twice the mess. Best regards /Glyn

1 0

Re: [Observium] CASA CMTS - 32bit counters used instead of 64bit.
by T-MONT Administrator 06 Nov '15

06 Nov '15

Hi Tom, I'm not sure if I got your point :) Casa c2200 CMTS does respond with 64bit counters, for example: # snmpget -v2c -c xxxx 1.1.1.1 IF-MIB::ifHCOutOctets.77 IF-MIB::ifHCInOctets.77 IF-MIB::ifHCOutOctets.77 = Counter64: 2351994689934 IF-MIB::ifHCInOctets.77 = Counter64: 319195830460 I was wondering if it's possible to force Observium to query those. Regards, Pawel > If you make the device reply with 64bit counters, we'll happily use > them. > That includes using v2c/v3, as v1 does not do HC counters!

2 3

Can i mysql DB as a different server in Observium.....?
by Chaman Rathee 05 Nov '15

05 Nov '15

Hi , Can I use mysql DB as a different server in observium ? If yes, I need to change only DB parameter in config.php or something else. $config['db_host'] = "Remote_Server_IP"; $config['db_user'] = "root"; $config['db_pass'] = "PAss032014"; $config['db_name'] = "observium"; ......... With Best Regards, Chaman Rathee Mob. No:- +91-9560055816 [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

2 1

Graphs not drawing after update to rev 7172
by Tim Vaughan 05 Nov '15

05 Nov '15

This afternoon I updated my installation to 7172 via svn. Since then, my graphs are being drawn blank (e.g. this one of the poller duration: https://dl.dropboxusercontent.com/u/3183918/pollergraph.png. Ignore the earlier gap, it's the one from about 1630 onwards I'm talking about). I've done *./discovery.php -u* as normal and have manually run *./poller.php -h all*. I have checked /pollerlog and it doesn't appear to be running automatically by cron as usual. Any ideas? Tim

2 1

LDAP Issue
by Quentin Beggs 05 Nov '15

05 Nov '15

Hi - I'm trying to configure LDAP authentication according to the authentication page on the observium website, but it doesn't appear to be working. If I try a login that should work or one that doesn't work the result is the same - the login fields blank out again with no error message. Just wondering how I go about fixing this? Alternatively is there any log files that can offer some explanation as to why it's not working? I've had a look but can't find any. Thanks, Quentin

2 2

CASA CMTS - 32bit counters used instead of 64bit.
by T-MONT Administrator 05 Nov '15

05 Nov '15

Hi, I'm trying to monitor CASA c2200 CMTS device with Observium; it gets recognized as "casa-dcts". The problem is that Observium doesn't use 64bit interface counters but 32bit for downstream and upstream interfaces. This results in gaps in the traffic graphs when traffic counter overflows. How can I force Observium to switch to use 64bit counters instead of 32bit? Thanks! Pawel

2 1

Issue with traffic volume graph for asymmetric interfaces.
by T-MONT Administrator 05 Nov '15

05 Nov '15

Hi Adam, Any chances to implement this change? Thaks & Regards, Pawel > Fixing this would need a little bit of rewriting of the graph > definition.

1 0

Dropout and graph problems in graphs.............!
by Chaman Rathee 05 Nov '15

05 Nov '15

Is there anyone who is monitoring 200 devices in Observium? Because I am facing dropout and gap problem in graphs. CPU and Physical Memory utilization also goes more than 80%. Server detail is here:- Machine Type :- VM ( Guest OS) Physical Memory :- 12GB Swap Size :- 4GB No. Of CPU :- 8 Note:- We are monitoring 200 devices in Observium. [cid:image001.png@01D116E8.95AF6A60] ......... With Best Regards, Chaman Rathee Mob. No:- +91-9560055816 [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

4 8

Issue with traffic volume graph for asymmetric interfaces.
by T-MONT Administrator 05 Nov '15

05 Nov '15

Hi guys, I have problem with graphing traffic graphs for one of my Observium monitored device; problem occurs when it comes to graph traffic for asymmetric interfaces - ones that only send or receive traffic. The problem is that when such interface is queried on the device for actual traffic values the response is: for only-sending interface: Rx OID -> noSuchInstance, TxOID -> actual bits for only-receiving interface: Rx OID -> actual bits, TxOID -> noSuchInstance Those values as used then to populate corresponding RRD file which results in series of "NaN"s for INOCTETS or OUTOCTETS data stores. The result is that traffic graph plotted from this RRD is corrupted - like this example: http://i66.tinypic.com/7281fo.png Currently my Observium instance is at revision 7167. Could you share with me any ideas how to resole this issue? Thank you & Regards! Pawel

2 5

QNAP IOPS Latency
by Simone Montagnani 05 Nov '15

05 Nov '15

Hi, is there any QNAP support to output graph of volume IOPS and Latency via Observium? Regards, Simone

3 3

F5 and Palo Alto firewall
by George Philip 04 Nov '15

04 Nov '15

Hi,Does Obserium provide support for F5 and Palo alto firewall as I don't see that getting discovered by the application ? Thanks,George

2 1

Observium ports stack
by Σταύρος Κρουστούρης 04 Nov '15

04 Nov '15

Hello, I have noticed that ports stack is missing some entries. As a result i cant find some relations between some physical and aggregated interfaces. Is this a known bug/misbehavior? Do you need some extra details? Thanks -- ----------------------------------------------------------------------- Stavros Kroustouris - staurosk(a)noc.grnet.gr GRNET NOC WEB APPLICATIONS DEVELOPER - http://noc.grnet.gr -----------------------------------------------------------------------

2 2

Re: [Observium] Dropout and graph problems in graphs.............!
by ron＠rjr-services.com 04 Nov '15

04 Nov '15

I'm monitoring a little over 600 devices with my installation. Likewise in a VM, 8x vCPU @3.0GHz, 32GB DRAM, and 32GB of swap. While CPU goes up to 85+% during polls, I don't have any drops whatsoever. Given what you describe, you probably want to add more memory to your VM. Also, what is your average and overall polling time? You may need to add additional polling instances so that everything completes within the 5min window before the next round of polling starts, which again means more memory will be very helpful. Sent from my Verizon Wireless 4G LTE smartphone -------- Original message -------- From: Chaman Rathee <chaman.rathee(a)progression.com> Date: 11/03/2015 9:37 PM (GMT-07:00) To: 'Observium Network Observation System' <observium(a)observium.org> Subject: [Observium] Dropout and graph problems in graphs.............! -- This message has been scanned by E.F.A. Project and is believed to be clean.

1 0

any update for OSPF alert trigger
by Samarasinghe, Sujith 03 Nov '15

03 Nov '15

Hi , This has been discussed in the past but not sure if I have missed updates. Is there a way to trigger OSPF alerts in Observium? Thanks, Sujith. Confidentiality Note: This e-mail and any attachments are confidential and may be protected by legal privilege. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation.

1 0

dropout or gap over all graphs.
by Chaman Rathee 03 Nov '15

03 Nov '15

Hi Team, I got dropouts or gap over all my graphs. But there is no dropouts/gap for my localhost map. I also increase snmpget timeout to check but it doesn't work for me. ......... With Best Regards, Chaman Rathee Mob. No:- +91-9560055816 [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

3 4

Default new ports to not alert?
by Spencer Ryan 03 Nov '15

03 Nov '15

We are considering adding some of our testbed Cisco devices to Observium, but we'd like all the ports to default to not alert, since they are constantly up and down, and vlans are created dynamically. Any way to do this in the config? *Spencer Ryan* | Senior Systems Administrator | sryan(a)arbor.net *Arbor Networks* +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com

1 0

P2P-Radio in Jira
by Eduardo Schoedler 03 Nov '15

03 Nov '15

Hi people, Recently I created tickets for our p2p-radios in Jira. I know it's not easy to do, but do you have idea when it will be available in the professional edition? Thank you. Regards, -- Eduardo Schoedler

1 0

Search pages broken?
by Tim Cooper 03 Nov '15

03 Nov '15

A colleague has just noticed that the ports and device search pages no longer search when you click the button? We have just upgraded to 7161 today, but not sure when it broke as it's been a while since anyone actually used the search page... We are working around this quite easily but seemed worth mentioning :) Thanks, Tim C

4 4