- observium - lists.observium.org

Port Descriptions on Linux hosts?
by Telsin 11 Nov '15

11 Nov '15

I’ve got someRHEL boxes running as routers in Observium, and I’m wondering how to apply names to them so they get picked up as Transit, Peering, Customer, etc. Any solution for this? Thanks! -Darrell

1 0

ports graphs errors
by Jeffrey d'Ambly 10 Nov '15

10 Nov '15

I’m seeing something odd with my Cisco ASA, for some reason the ports summary graph isn’t working. What is odd is that each of the individual interfaces are working fine. It looks like there is something wrong with the RRD command, how can I fix this? RRDTool Output: ERROR: String ends after the = sign on 'CDEF:inB=' Total time: 0.017 | RRDtool time: 0.015s RRDTool Command rrdtool graph /tmp/WyzPqJz6C3QdevQB.png -g --alt-autoscale --rigid --start 1447085684 --end 1447172084 --width 1159 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DejaVuSansMono' --font AXIS:7:'DejaVuSansMono' --font-render-mode normal -E CDEF:inB= CDEF:outB= CDEF:octets=inB,outB,+ CDEF:doutB=outB,-1,* CDEF:inbits=inB,8,* CDEF:outbits=outB,8,* CDEF:bits=inbits,outbits,+ CDEF:doutbits=doutB,8,* VDEF:95thin=inbits,95,PERCENT VDEF:95thout=outbits,95,PERCENT VDEF:d95thout=doutbits,5,PERCENT VDEF:totin=inB,TOTAL VDEF:avein=inbits,AVERAGE VDEF:totout=outB,TOTAL VDEF:aveout=outbits,AVERAGE VDEF:tot=octets,TOTAL COMMENT:' \l' HRULE:999999999999999#FFFFFF:'Total Rx': GPRINT:inbits:LAST:%6.2lf%s GPRINT:inbits:AVERAGE:%6.2lf%s GPRINT:inbits:MIN:%6.2lf%s GPRINT:inbits:MAX:%6.2lf%s GPRINT:totin:%6.2lf%sB COMMENT:'\l' HRULE:999999999999999#FFFFFF:' Tx': GPRINT:outbits:LAST:%6.2lf%s GPRINT:outbits:AVERAGE:%6.2lf%s GPRINT:outbits:MIN:%6.2lf%s GPRINT:outbits:MAX:%6.2lf%s GPRINT:totout:%6.2lf%sB COMMENT:'\l' HRULE:999999999999999#FFFFFF:' Agg': GPRINT:bits:LAST:%6.2lf%s GPRINT:bits:AVERAGE:%6.2lf%s GPRINT:bits:MIN:%6.2lf%s GPRINT:bits:MAX:%6.2lf%s GPRINT:tot:%6.2lf%sB COMMENT:'\l' HRULE:0#999999 RRDTool Files Used No RRD information returned. This may be because the graph module doesn't yet return this data.

2 2

Slack Integration
by Guilherme de Freitas Figueiredo 10 Nov '15

10 Nov '15

Hello! on the directory alerts exists the slack.inc.php. directory in the alerts there is slack.inc.php. researched on the Internet (http://www.rickheil.com/?p=35#comment-39) and also in the full dump of the observium config file and saw that there are integration options with the slack. I tried to apply them but without success. someone already managed to do this integration? Below are the configs: $config['alerts']['slack']['username'] = "Observium"; $config['alerts']['slack']['channel'] = "#cgr"; $config['alerts']['slack']['url'] = " https://hooks.slack.com/services/T0BMNB4UC/B0BMU32QY/xeUSiseEo2qGlXKOACLR5Z… "; $config['alerts']['slack']['webhook_url'] = " https://hooks.slack.com/services/T0BMNB4UC/B0BMU32QY/xeUSiseEo2qGlXKOACLR5Z… "; $config['alerts']['slack']['default']['contact'] = "channel::#cgr||username::Observium||url:: https://hooks.slack.com/services/T0BMNB4UC/B0BMU32QY/xeUSiseEo2qGlXKOACLR5Z… "; Best Regards! []s! -- Guilherme de Freitas Figueiredo

3 4

Re: [Observium] OSPF nei alerts
by Samarasinghe, Sujith 10 Nov '15

10 Nov '15

Team, can we not use the ospf neighbor counts -1 to trigger a alert? Sujith. Confidentiality Note: This e-mail and any attachments are confidential and may be protected by legal privilege. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation.

2 2

Active Directory help
by Cody Cook 09 Nov '15

09 Nov '15

Hi everyone, I know this subject is touched on in the past but any help from anyone who has this working would be appreciated. I've been following the FAQ for LDAP login via Active Directory but I always come across the same error. Fatal error: LDAP TLS required but not successfully negotiated [Connect error] In /debug, I see that it connects but then inserts a line saying that Auth failed. https://doc.rotten.soy/buqar.vhdl In my Windows Server 2012 R2 box, I see this line come up in the Event Viewer: "A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 10." This is one of the more recent configs I've tried. https://doc.rotten.soy/wosej.php My filtered dsquery information is... https://doc.rotten.soy/inure.tex Things I've tried modifying: auth_ldap_binddn, I've tried changing this but this doesn't seem to be my problem since it appears to connect. (Should I have some kind of special rights for this user)? auth_ldap_suffix, This one I'm not sure exactly what the string is looking for. The actual CN of a user won't include the CN=Builtin. I've tried without. auth_ldap_group, tried with and without Domain Users CN. auth_ldap_groups, tried the full LDAP path and also just the "Domain Admins"/"Domain Users" What am I missing? :( Any help is greatly appreciated in what I am doing wrong. Is it a problem with my Server 2012 install and something I need to change? Is it a problem in one of the packages installed for Observium? Cody

1 1

SVN Password
by Robbie Wright 09 Nov '15

09 Nov '15

My SVN password is no longer working. How do we tell if a subscription has expired? Do we get a notice when they do expire? Robbie Wright Siuslaw Broadband <https://siuslawbroadband.com> 541-902-5101

2 2

menu css error
by Simon Smith 09 Nov '15

09 Nov '15

Hi All, not sure if this is a CSS error or a STUPID IE error we leave observium running on a windows 7 IE 11 computer for monitoring reasons however when i however over the menus, the styling is small and wrong! attached screenshot showing what i mean regards Simon - Hestor Ltd

4 6

Adding MiBs to Observium
by Oliver Marshall 09 Nov '15

09 Nov '15

Hi all What's the best way to add MiBs to Observium? Specifically I want to support HP MSM 760 WiFi controllers and also Smoothwall firewalls. Olly

3 8

OSPF alerts from Observium syslogs
by Samarasinghe, Sujith 09 Nov '15

09 Nov '15

Hi , Did anyone succeeded triggering alerts through Observium syslog? Thanks, Sujith. Confidentiality Note: This e-mail and any attachments are confidential and may be protected by legal privilege. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation.

1 0

Setting up email alert notifications
by Alex Winder ＠ M5i 07 Nov '15

07 Nov '15

Hi, I'm looking to set up alert notifications to help with the monitoring of the devices which we already have loaded into Observium, but having some trouble. See below attached image. This is how I currently have alert checkers set. As you can see there are 0 entities being loaded into all alert checks, despite using all devices, and I can't find anything about how to get entities to load. Could someone assist me in how to successfully set up the notifications? We have over 200 devices being monitored in Observium, adding email notifications would improve the system dramatically for us. Regards, Alex.

2 2

Adding device IPs rather than hostnames
by Oliver Marshall 06 Nov '15

06 Nov '15

Is it possible to allow an IP for a device to be entered in to the Add Device screen rather than requiring a hostname? Olly

3 3

RANCID Integration with RHEL
by Johnson, Edward A. 06 Nov '15

06 Nov '15

I’m trying to install RANCID on Observium using the doc http://www.observium.org/docs/rancid/. I get as far as Run this command to create the folder structure: su - rancid /var/lib/rancid/bin/rancid-cvs but get -bash: /var/lib/rancid/bin/rancid-cvs: No such file or directory Is there a different directory when running Observium on RHEL that I should be using to create the folder structure?

3 6

BlueWalker/PowerWalker EPPC UPS
by Glyn Parker 06 Nov '15

06 Nov '15

Hei, I have an BlueWalker (Powerwalker) UPS and added support for my (VFI2000 LCD) as attached. This should work for all VFIs and others with the same god dam ObjectID of .1.3.6.1.4.1.935.10.1 (which should be all EPPC manufactured units). Im not an expert in Observium or all things SNMP, but this was my work. If others find it useful, then great. PS: Dont read this Yes its yet another UPS MIB which EPPC could have done with RFC1628. The unit supports RFC1628 but not enough to be ideal ;( I didnt want to make some bastard mix of both MIBS as that's just twice the mess. Best regards /Glyn

1 0

Re: [Observium] CASA CMTS - 32bit counters used instead of 64bit.
by T-MONT Administrator 06 Nov '15

06 Nov '15

Hi Tom, I'm not sure if I got your point :) Casa c2200 CMTS does respond with 64bit counters, for example: # snmpget -v2c -c xxxx 1.1.1.1 IF-MIB::ifHCOutOctets.77 IF-MIB::ifHCInOctets.77 IF-MIB::ifHCOutOctets.77 = Counter64: 2351994689934 IF-MIB::ifHCInOctets.77 = Counter64: 319195830460 I was wondering if it's possible to force Observium to query those. Regards, Pawel > If you make the device reply with 64bit counters, we'll happily use > them. > That includes using v2c/v3, as v1 does not do HC counters!

2 3

Can i mysql DB as a different server in Observium.....?
by Chaman Rathee 06 Nov '15

06 Nov '15

Hi , Can I use mysql DB as a different server in observium ? If yes, I need to change only DB parameter in config.php or something else. $config['db_host'] = "Remote_Server_IP"; $config['db_user'] = "root"; $config['db_pass'] = "PAss032014"; $config['db_name'] = "observium"; ......... With Best Regards, Chaman Rathee Mob. No:- +91-9560055816 [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

2 1

Graphs not drawing after update to rev 7172
by Tim Vaughan 06 Nov '15

06 Nov '15

This afternoon I updated my installation to 7172 via svn. Since then, my graphs are being drawn blank (e.g. this one of the poller duration: https://dl.dropboxusercontent.com/u/3183918/pollergraph.png. Ignore the earlier gap, it's the one from about 1630 onwards I'm talking about). I've done *./discovery.php -u* as normal and have manually run *./poller.php -h all*. I have checked /pollerlog and it doesn't appear to be running automatically by cron as usual. Any ideas? Tim

2 1

LDAP Issue
by Quentin Beggs 06 Nov '15

06 Nov '15

Hi - I'm trying to configure LDAP authentication according to the authentication page on the observium website, but it doesn't appear to be working. If I try a login that should work or one that doesn't work the result is the same - the login fields blank out again with no error message. Just wondering how I go about fixing this? Alternatively is there any log files that can offer some explanation as to why it's not working? I've had a look but can't find any. Thanks, Quentin

2 2

CASA CMTS - 32bit counters used instead of 64bit.
by T-MONT Administrator 05 Nov '15

05 Nov '15

Hi, I'm trying to monitor CASA c2200 CMTS device with Observium; it gets recognized as "casa-dcts". The problem is that Observium doesn't use 64bit interface counters but 32bit for downstream and upstream interfaces. This results in gaps in the traffic graphs when traffic counter overflows. How can I force Observium to switch to use 64bit counters instead of 32bit? Thanks! Pawel

2 1

Issue with traffic volume graph for asymmetric interfaces.
by T-MONT Administrator 05 Nov '15

05 Nov '15

Hi Adam, Any chances to implement this change? Thaks & Regards, Pawel > Fixing this would need a little bit of rewriting of the graph > definition.

1 0

Dropout and graph problems in graphs.............!
by Chaman Rathee 05 Nov '15

05 Nov '15

Is there anyone who is monitoring 200 devices in Observium? Because I am facing dropout and gap problem in graphs. CPU and Physical Memory utilization also goes more than 80%. Server detail is here:- Machine Type :- VM ( Guest OS) Physical Memory :- 12GB Swap Size :- 4GB No. Of CPU :- 8 Note:- We are monitoring 200 devices in Observium. [cid:image001.png@01D116E8.95AF6A60] ......... With Best Regards, Chaman Rathee Mob. No:- +91-9560055816 [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

4 8

Issue with traffic volume graph for asymmetric interfaces.
by T-MONT Administrator 05 Nov '15

05 Nov '15

Hi guys, I have problem with graphing traffic graphs for one of my Observium monitored device; problem occurs when it comes to graph traffic for asymmetric interfaces - ones that only send or receive traffic. The problem is that when such interface is queried on the device for actual traffic values the response is: for only-sending interface: Rx OID -> noSuchInstance, TxOID -> actual bits for only-receiving interface: Rx OID -> actual bits, TxOID -> noSuchInstance Those values as used then to populate corresponding RRD file which results in series of "NaN"s for INOCTETS or OUTOCTETS data stores. The result is that traffic graph plotted from this RRD is corrupted - like this example: http://i66.tinypic.com/7281fo.png Currently my Observium instance is at revision 7167. Could you share with me any ideas how to resole this issue? Thank you & Regards! Pawel

2 5

QNAP IOPS Latency
by Simone Montagnani 05 Nov '15

05 Nov '15

Hi, is there any QNAP support to output graph of volume IOPS and Latency via Observium? Regards, Simone

3 3

F5 and Palo Alto firewall
by George Philip 05 Nov '15

05 Nov '15

Hi,Does Obserium provide support for F5 and Palo alto firewall as I don't see that getting discovered by the application ? Thanks,George

2 1

Observium ports stack
by Σταύρος Κρουστούρης 04 Nov '15

04 Nov '15

Hello, I have noticed that ports stack is missing some entries. As a result i cant find some relations between some physical and aggregated interfaces. Is this a known bug/misbehavior? Do you need some extra details? Thanks -- ----------------------------------------------------------------------- Stavros Kroustouris - staurosk(a)noc.grnet.gr GRNET NOC WEB APPLICATIONS DEVELOPER - http://noc.grnet.gr -----------------------------------------------------------------------

2 2

Re: [Observium] Dropout and graph problems in graphs.............!
by ron＠rjr-services.com 04 Nov '15

04 Nov '15

I'm monitoring a little over 600 devices with my installation. Likewise in a VM, 8x vCPU @3.0GHz, 32GB DRAM, and 32GB of swap. While CPU goes up to 85+% during polls, I don't have any drops whatsoever. Given what you describe, you probably want to add more memory to your VM. Also, what is your average and overall polling time? You may need to add additional polling instances so that everything completes within the 5min window before the next round of polling starts, which again means more memory will be very helpful. Sent from my Verizon Wireless 4G LTE smartphone -------- Original message -------- From: Chaman Rathee <chaman.rathee(a)progression.com> Date: 11/03/2015 9:37 PM (GMT-07:00) To: 'Observium Network Observation System' <observium(a)observium.org> Subject: [Observium] Dropout and graph problems in graphs.............! -- This message has been scanned by E.F.A. Project and is believed to be clean.

1 0

any update for OSPF alert trigger
by Samarasinghe, Sujith 04 Nov '15

04 Nov '15

Hi , This has been discussed in the past but not sure if I have missed updates. Is there a way to trigger OSPF alerts in Observium? Thanks, Sujith. Confidentiality Note: This e-mail and any attachments are confidential and may be protected by legal privilege. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation.

1 0

dropout or gap over all graphs.
by Chaman Rathee 04 Nov '15

04 Nov '15

Hi Team, I got dropouts or gap over all my graphs. But there is no dropouts/gap for my localhost map. I also increase snmpget timeout to check but it doesn't work for me. ......... With Best Regards, Chaman Rathee Mob. No:- +91-9560055816 [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

3 4

Default new ports to not alert?
by Spencer Ryan 04 Nov '15

04 Nov '15

We are considering adding some of our testbed Cisco devices to Observium, but we'd like all the ports to default to not alert, since they are constantly up and down, and vlans are created dynamically. Any way to do this in the config? *Spencer Ryan* | Senior Systems Administrator | sryan(a)arbor.net *Arbor Networks* +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com

1 0

P2P-Radio in Jira
by Eduardo Schoedler 03 Nov '15

03 Nov '15

Hi people, Recently I created tickets for our p2p-radios in Jira. I know it's not easy to do, but do you have idea when it will be available in the professional edition? Thank you. Regards, -- Eduardo Schoedler

1 0

Search pages broken?
by Tim Cooper 03 Nov '15

03 Nov '15

A colleague has just noticed that the ports and device search pages no longer search when you click the button? We have just upgraded to 7161 today, but not sure when it broke as it's been a while since anyone actually used the search page... We are working around this quite easily but seemed worth mentioning :) Thanks, Tim C

4 4

General pre-buy questions
by Ryan Milton 03 Nov '15

03 Nov '15

I am thinking of pushing team to purchase the full version, and even for some support. I have a free version now Questions I have are the following for my managers: 1. Can I alert off of bandwidth utilization? What other types of things can I alert off for the enterprise? 2. Can I alert for jitter across an MPLS? This is a biggie, because we have about 40 circuits. 3. We use WUG, which I hate… how is this better? 4. We use Solarwinds, which is expensive, why is this better? 5. (I know this is bad form, but) why these bars in the graph: Thanks for your awesome answers, and please, give me some reasons that I can use to get team to put money into this. Ryan Milton

3 4

CDR 98th accounting
by Niilo Kajander 03 Nov '15

03 Nov '15

Hi, I was wondering if there are any plans to add CDR 98th traffic accounting as an option? — Niilo Kajander nk(a)kajander.fi

2 2

Port () Deleted
by Matt Zillmann 03 Nov '15

03 Nov '15

Hello, When polling devices, all ports are getting deleted: "Port () deleted" Has anyone seen this or know how to fix this? Everything else is being discovered and polled normally. Thank you, Matt

2 2

Portnames instead of ifAlias for Fabric OS devices
by Ole Hansen 03 Nov '15

03 Nov '15

Hello, Observium (as of 0.15.9.6997) displays ifAlias / ifDescr as label for Brocade Fabric OS SAN switches. Brocade, however, uses “portnames”, which can be found at OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36 Is this per design or just because very few have Fabric OS devices in Observium? — Ole Hansen

2 4

Subscription fails
by Svensson Fredrik A 02 Nov '15

02 Nov '15

I get stuck here: [cid:image001.png@01D11559.9F0088A0] Regards Fredrik

2 2

Re: [Observium] EIGRP
by brokerdavelhr 02 Nov '15

02 Nov '15

ISIS is indeed the way to go....imho. Versatile, simple, reliable, and highly supported :-) Sent via the Samsung GALAXY S®4, an AT&T 4G LTE smartphone -------- Original message -------- From: Adam Armstrong <adama(a)memetic.org> Date: 11/01/2015 5:31 PM (GMT-07:00) To: observium(a)observium.org Subject: Re: [Observium] EIGRP IS-IS++ adam. On 02/11/2015 00:29:54, Raphael Maunier <raphael.maunier(a)gmail.com> wrote:The original question and answer was not about the igp itself but about the support of it ! He want to move from OSPF to Eigrp and still get the same support from an opensource software. That was clearly the answer : You can expect to have bad or no support using EIGRPChoosing the path to use a protocol that is clearly not supported by all vendor, will almost 100% of the time lead you to a lack of compatibility from the community. And Yes IS-IS is the way go :) Raphael On 02 Nov 2015, at 01:15, Aaron Finney <aaron.finney(a)openx.com> wrote: I would argue that IS-IS also separates the men from the boys, is an open standard, and also happens to be protocol-neutral. I have my own opinions about IGPs, of course, but I agree with Alex on this one...nobody asked for my opinion on using EIGRP, so I'll save it until they do. :) On Sunday, November 1, 2015, Ron Marosko <ron(a)rjr-services.com> wrote: I probably bleed Cisco more than most on this list, something about that two day test 16 years ago. I’ll just say one thing about routing protocols. BGP. Yes, it *is* as good running as an IGP as it is as an EGP. And separates the men from the boys, so to speak. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Raphael Maunier Sent: Sunday, November 01, 2015 4:47 PM To: Observium Network Observation System Subject: Re: [Observium] EIGRP If you want good support from any software, you should not use "proprietary" protocols and use something supported by more than one or 2 vendor.Another option, use it and buy expensive software from that vendor. Envoyé de mon iPhone Le 1 nov. 2015 à 23:37, Chard, Alex (RET-SYD) <Alex.Chard(a)Reed-Elsevier.com.au> a écrit :Perhaps we would do better not to tell people how to run their network…We do not know anything about the network in question beyond the fact that it is probably monitored with Observium. Also Cisco released basic EIGRP functionality for other vendors to implement in a RFC.http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/enh… So the real question is not “why?” but “is this supported in Observium?”.. and the real answer is “no”. Regards,Alex Chard Senior Network Engineer<image001.jpg> 475 Victoria Ave, Chatswood, NSW 2067 (: +61 (02) 8007 0709 <image002.gif>: +61 (04) 03 894 614*: alex.chard(a)reed-elsevier.com.au www.reedelsevier.com From: observium [mailto:observium-bounces@observium.org] On Behalf Of Raphael Maunier Sent: Monday, 2 November 2015 4:07 AM To: Observium Network Observation System Subject: Re: [Observium] EIGRP HuH, The real question is Why ? Ospf can be used with all vendor, eigrp .. not compatible unless you have a cisco network and other clone equipment.Ospf is widely supported and even with software like Observium. You can expect to have bad or no support using EIGRP 2015-11-01 17:45 GMT+01:00 Jason Vanlandingham <van.sjason(a)gmail.com>:I've been running OSPF but am changing to EIGRP. EIGRP isn't showing in the routing section when I look at devices. _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium This e-mail is for the use of the intended recipient(s) only. If you have received this e-mail in error, please notify the sender immediately and then delete it. If you are not the intended recipient, you must not use, disclose or distribute this e-mail without the author's permission. We have taken precautions to minimise the risk of transmitting software viruses, but we advise you to carry out your own virus checks on any attachment to this e-mail. We cannot accept liability for any loss or damage caused by software viruses. _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Aaron Finney | Network Engineer 888 East Walnut Street, 2nd Floor | Pasadena, CA 91101 office: +1 (626) 466-1141 x6035 Watch how we make online advertising simple: http://bit.ly/Ent_vid www.openx.com | follow us on: Twitter Facebook LinkedIn _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Graph errors on OS upgrade
by Roland Hill 02 Nov '15

02 Nov '15

Hi list, I'm running CE version 0.15.6.6430, on my non-critical home network. I recently upgraded my server OS from Ubuntu 15.04 to 15.10. This appears to have resulted in some of the graphs in Observium now not drawing. The OS upgraded took rrdtools from version 1.4.8 to 1.5.4, and I suspect this is the root of the issue as I seem to remember this being raised on the list before. I note there was a bugfix committed in August for "Fixed some issues with rrdtool command parsing on newer rrdtool versions". Can you confirm that the draw error's I'm seeing are most likely related to the rrdtool version, and that the next release of CE will probably fix it? An example of the rrdtool error is: RRDTool Output: ERROR: Unused Arguments "" in command : AREA:inbits0#B6D14B:p3p1 Rx: Sorry if this is not enough information. I can provide screenshots if required. -- Regards, Roland PGP Key 0xDA39319B = BCF0 1214 BAE9 5A3D 46FC 21A6 360D 9398 DA39 319B

2 1

Unable to send email from Observium CE
by George Philip 01 Nov '15

01 Nov '15

Hi, I have installed the Observium CE on the centOS and the mail is not working for me.Can someone please in finding the issue ? Below are the mail config info from config.php : // Set up a default alerter (email to a single address) $config['alerts']['alerter']['default']['descr'] = "Network Alert"; $config['alerts']['alerter']['default']['type'] = "mail"; $config['alerts']['alerter']['default']['contact'] = "network1_alert(a)abc.com"; $config['alerts']['alerter']['default']['enable'] = TRUE; $config['email']['enable'] = TRUE; $config['email']['default'] = "network1_alert(a)abc.com"; $config['email']['default_only'] = TRUE; $config['email']['from'] = "Observium<observium(a)abrrad100.abc.com>"; $config['email']['backend'] = 'mail'; $config['email']['smtp_host'] = 'abrsmtp1001.abc.com'; $config['email']['smtp_port'] = 25; $config['email']['smtp_timeout'] = 20; $config['email']['smtp_secure'] = FALSE; $config['email']['smtp_auth'] = FALSE; $config['email']['smtp_username'] = NULL; $config['email']['smtp_password'] = NULL; $config['email']['sendmail_path'] = '/usr/sbin/sendmail'; Also,when I run the below command, I get the following error: [root@abrrad1001 observium]# php test_mail.php -h abcd.tor.fd01.01.01.42PHP Fatal error: Call to undefined function mres() in /opt/observium/test_mail.php on line 41 Thanks,George

2 1

IP SLA Cisco not repoerted
by Federico Olivieri 31 Oct '15

31 Oct '15

Hi All, I have just enabled IP SLA on my cisco router but I don't see any graph in my OBSERVIUM. There is any particular procedure that I have to follow? snmp-server enable traps ipsla Thanks Federico

3 4

NetApp OnTap 8 OIDs
by Daniel Steig 31 Oct '15

31 Oct '15

Hi at all, does anyone by chance came any further by finding the new OIDs to monitor the netapps Disk I/O. I tried my best but can't get the graphs working. Thank you very much in advance and have a nice day, Daniel Daniel Steig System Engineer URL: www.fyber.com -- *Daniel Steig* System Engineer Skype: d.steig-fyber URL: www.fyber.com

1 0

Does observium support F5 and Palo Alto firewall
by George Philip 30 Oct '15

30 Oct '15

Hi,Does observium monitor (or have mibs) for Palo Alto firewall and F5's ? Thanks,George

1 0

LLDP issues
by Mark Martinec 30 Oct '15

30 Oct '15

Spent some time trying to get Observium to deal with MIBs as produced by LLDP (Link Layer Discovery Protocol) on a couple of diverse network equipment types. Running the latest CE edition 0.15.6.6430. After initial meager success (only two boxes recognized and several L2 neighbours reported with wrong interfaces), a couple of changes in includes/discovery/discovery-protocols/lldp-mib.inc.php brought some sense into results. There are essentially two problems there: - some lldpRemoteSystemsData OIDs could not be correlated with an interface on the other side (for various reasons, see below); - a fallback mechanism which tries to find a match on an interface's MAC address produces a wrong match, because typically all ports on larger switches have the same MAC address and the heuristics just picks the first match, which is almost always wrong. In case of multiple matches the matching on MAC should just fail, which at least would not produce a senseless match causing operators to scratch their heads and wonder who crossed the cables. The comment in lldp-mib.inc.php : // Find the device by MAC address, still matches multiple ports sometimes, we use the first one and hope we're lucky if very much misguided, as all port MAC addresses on a switch are typically the same, at least on all device types that I checked. The first issue above needs more explanation. I found a couple of different reasons for a failed match, as follows. Case 1: $ snmpbulkwalk -v2c -c ... -M mibs -m LLDP-MIB ... lldpRemoteSystemsData LLDP-MIB::lldpRemChassisIdSubtype.5360466.52.2 = INTEGER: macAddress(4) LLDP-MIB::lldpRemChassisId.5360466.52.2 = Hex-STRING: C4 54 44 1E 71 4E LLDP-MIB::lldpRemPortIdSubtype.5360466.52.2 = INTEGER: local(7) LLDP-MIB::lldpRemPortId.5360466.52.2 = Hex-STRING: 30 2F 34 37 00 LLDP-MIB::lldpRemPortDesc.5360466.52.2 = STRING: "Slot: 0 Port: 47 10G - Level" LLDP-MIB::lldpRemSysName.5360466.52.2 = STRING: "<hidden>" LLDP-MIB::lldpRemSysDesc.5360466.52.2 = STRING: "T3048-LY2R L2/L3 Switch" LLDP-MIB::lldpRemSysCapSupported.5360466.52.2 = BITS: 28 00 bridge(2) router(4) LLDP-MIB::lldpRemSysCapEnabled.5360466.52.2 = BITS: 20 00 bridge(2) LLDP-MIB::lldpRemManAddrIfSubtype.5360466.52.2.6.6.196.84.68.30.113.78 = INTEGER: ifIndex(2) LLDP-MIB::lldpRemManAddrIfId.5360466.52.2.6.6.196.84.68.30.113.78 = INTEGER: 69 LLDP-MIB::lldpRemManAddrOID.5360466.52.2.6.6.196.84.68.30.113.78 = OID: iso.3.6.1.4.1.7244 LLDP-MIB::lldpRemOrgDefInfo.5360466.52.2.0.18.15.1.1 = Hex-STRING: 01 00 00 00 24 LLDP-MIB::lldpRemOrgDefInfo.5360466.52.2.0.18.15.2.1 = Hex-STRING: 00 00 00 LLDP-MIB::lldpRemOrgDefInfo.5360466.52.2.0.18.15.3.1 = Hex-STRING: 01 00 00 00 00 LLDP-MIB::lldpRemOrgDefInfo.5360466.52.2.0.18.15.4.1 = Hex-STRING: 23 F2 LLDP-MIB::lldpRemOrgDefInfo.5360466.52.2.0.128.194.1.1 = Hex-STRING: 00 01 LLDP-MIB::lldpRemOrgDefInfo.5360466.52.2.0.128.194.2.1 = Hex-STRING: 02 00 00 LLDP-MIB::lldpRemOrgDefInfo.5360466.52.2.0.128.194.3.1 = Hex-STRING: 00 01 00 Case 2: LLDP-MIB::lldpRemChassisIdSubtype.9511080.4.5 = INTEGER: macAddress(4) LLDP-MIB::lldpRemChassisIdSubtype.9511149.2.6 = INTEGER: macAddress(4) LLDP-MIB::lldpRemChassisIdSubtype.9511174.3.7 = INTEGER: macAddress(4) LLDP-MIB::lldpRemChassisIdSubtype.9511209.26.8 = INTEGER: macAddress(4) LLDP-MIB::lldpRemChassisIdSubtype.9587238.48.9 = INTEGER: macAddress(4) LLDP-MIB::lldpRemChassisIdSubtype.9588774.27.10 = INTEGER: macAddress(4) LLDP-MIB::lldpRemChassisIdSubtype.9588907.28.11 = INTEGER: macAddress(4) LLDP-MIB::lldpRemChassisIdSubtype.9592381.42.12 = INTEGER: macAddress(4) LLDP-MIB::lldpRemChassisIdSubtype.9827133.8.14 = INTEGER: macAddress(4) LLDP-MIB::lldpRemChassisIdSubtype.9843364.9.16 = INTEGER: macAddress(4) LLDP-MIB::lldpRemChassisId.9511080.4.5 = Hex-STRING: 00 04 96 34 CB 7D LLDP-MIB::lldpRemChassisId.9511149.2.6 = Hex-STRING: 00 04 96 34 CB 78 LLDP-MIB::lldpRemChassisId.9511174.3.7 = Hex-STRING: 00 04 96 34 CB 8D LLDP-MIB::lldpRemChassisId.9511209.26.8 = Hex-STRING: 00 04 96 34 CB 93 LLDP-MIB::lldpRemChassisId.9587238.48.9 = Hex-STRING: A4 8C DB 0C 4B 00 LLDP-MIB::lldpRemChassisId.9588774.27.10 = Hex-STRING: 00 04 96 34 CB 7F LLDP-MIB::lldpRemChassisId.9588907.28.11 = Hex-STRING: 00 04 96 34 CB 8B LLDP-MIB::lldpRemChassisId.9592381.42.12 = Hex-STRING: 44 AD D9 6C 2D 80 LLDP-MIB::lldpRemChassisId.9827133.8.14 = Hex-STRING: C4 54 44 1E 71 4E LLDP-MIB::lldpRemChassisId.9843364.9.16 = Hex-STRING: 2C 60 0C 33 8F FF LLDP-MIB::lldpRemPortIdSubtype.9511080.4.5 = INTEGER: interfaceName(5) LLDP-MIB::lldpRemPortIdSubtype.9511149.2.6 = INTEGER: interfaceName(5) LLDP-MIB::lldpRemPortIdSubtype.9511174.3.7 = INTEGER: interfaceName(5) LLDP-MIB::lldpRemPortIdSubtype.9511209.26.8 = INTEGER: interfaceName(5) LLDP-MIB::lldpRemPortIdSubtype.9587238.48.9 = INTEGER: local(7) LLDP-MIB::lldpRemPortIdSubtype.9588774.27.10 = INTEGER: interfaceName(5) LLDP-MIB::lldpRemPortIdSubtype.9588907.28.11 = INTEGER: interfaceName(5) LLDP-MIB::lldpRemPortIdSubtype.9592381.42.12 = INTEGER: interfaceName(5) LLDP-MIB::lldpRemPortIdSubtype.9827133.8.14 = INTEGER: interfaceAlias(1) LLDP-MIB::lldpRemPortIdSubtype.9843364.9.16 = INTEGER: interfaceAlias(1) LLDP-MIB::lldpRemPortId.9511080.4.5 = STRING: "25" LLDP-MIB::lldpRemPortId.9511149.2.6 = STRING: "25" LLDP-MIB::lldpRemPortId.9511174.3.7 = STRING: "25" LLDP-MIB::lldpRemPortId.9511209.26.8 = STRING: "25" LLDP-MIB::lldpRemPortId.9587238.48.9 = STRING: "50" LLDP-MIB::lldpRemPortId.9588774.27.10 = STRING: "26" LLDP-MIB::lldpRemPortId.9588907.28.11 = STRING: "26" LLDP-MIB::lldpRemPortId.9592381.42.12 = STRING: "Te1/1/2" LLDP-MIB::lldpRemPortId.9827133.8.14 = Hex-STRING: 4C 69 6E 6B 20 74 6F 20 43 4D 49 2C 20 6E 65 75 68 75 62 00 LLDP-MIB::lldpRemPortId.9843364.9.16 = Hex-STRING: 55 70 6C 69 6E 6B 20 74 6F 20 49 4A 53 2D 4E 45 54 00 LLDP-MIB::lldpRemPortDesc.9511080.4.5 = STRING: LLDP-MIB::lldpRemPortDesc.9511149.2.6 = STRING: LLDP-MIB::lldpRemPortDesc.9511174.3.7 = STRING: LLDP-MIB::lldpRemPortDesc.9511209.26.8 = STRING: LLDP-MIB::lldpRemPortDesc.9587238.48.9 = STRING: XGE2 LLDP-MIB::lldpRemPortDesc.9588774.27.10 = STRING: LLDP-MIB::lldpRemPortDesc.9588907.28.11 = STRING: LLDP-MIB::lldpRemPortDesc.9592381.42.12 = STRING: TenGigabitEthernet1/1/2 LLDP-MIB::lldpRemPortDesc.9827133.8.14 = STRING: Slot: 0 Port: 48 10G - Level LLDP-MIB::lldpRemPortDesc.9843364.9.16 = STRING: Slot: 0 Port: 48 10G - Level LLDP-MIB::lldpRemSysName.9511080.4.5 = STRING: <hidden1>.ijs.si LLDP-MIB::lldpRemSysName.9511149.2.6 = STRING: <hidden2>.ijs.si LLDP-MIB::lldpRemSysName.9511174.3.7 = STRING: <hidden3>.ijs.si LLDP-MIB::lldpRemSysName.9511209.26.8 = STRING: <hidden4>.ijs.si LLDP-MIB::lldpRemSysName.9587238.48.9 = STRING: <hidden5> LLDP-MIB::lldpRemSysName.9588774.27.10 = STRING: <hidden6> LLDP-MIB::lldpRemSysName.9588907.28.11 = STRING: <hidden7> LLDP-MIB::lldpRemSysName.9592381.42.12 = STRING: <hidden8> LLDP-MIB::lldpRemSysName.9827133.8.14 = STRING: <hidden9> LLDP-MIB::lldpRemSysName.9843364.9.16 = STRING: <hidden10> LLDP-MIB::lldpRemSysDesc.9511080.4.5 = STRING: ExtremeXOS (X450a-24t) ... LLDP-MIB::lldpRemSysDesc.9511149.2.6 = STRING: ExtremeXOS (X450a-24t) ... LLDP-MIB::lldpRemSysDesc.9511174.3.7 = STRING: ExtremeXOS (X450a-24t) ... LLDP-MIB::lldpRemSysDesc.9511209.26.8 = STRING: ExtremeXOS (X450a-24t) ... LLDP-MIB::lldpRemSysDesc.9587238.48.9 = STRING: Networking Operating System RackSwitch G7052, IBM Networking OS: version 7.6.5, Boot image: version 7.6.5 LLDP-MIB::lldpRemSysDesc.9588774.27.10 = STRING: ExtremeXOS (X450a-24t) ... LLDP-MIB::lldpRemSysDesc.9588907.28.11 = STRING: ExtremeXOS (X450a-24t) ... LLDP-MIB::lldpRemSysDesc.9592381.42.12 = STRING: Cisco IOS Software, Catalyst L3 Switch Software... LLDP-MIB::lldpRemSysDesc.9827133.8.14 = STRING: T3048-LY2R L2/L3 Switch LLDP-MIB::lldpRemSysDesc.9843364.9.16 = STRING: T3048-LY2R L2/L3 Switch [...] In both cases 1 & 2 the lldpRemPortIdSubtype of 'interfaceAlias' and 'local' fell under the "default:" branch of a "switch ($lldp['lldpRemPortIdSubtype'])", instead of being treated just like a "case 'interfaceName':" branch. So my solution was to add "case 'interfaceAlias':" and "case 'local':" there; switch ($lldp['lldpRemPortIdSubtype']) { case 'interfaceName': + case 'interfaceAlias': + case 'local': A Case 3 is a bit nastier and is specific to our Summit Extreme X450a switches. The problem there is that the interface name (i.e. a port number) as reported in the LLDP MIB does not use the same naming/numbering convention as the IF-MIB and SQL: the LLDP MIB just uses a port number (1 .. 26), while the SQL field ports.ifName prefixes a port number with a chassis number, which is always a 1 in a non-stackable switch. Moreover the ifIndex uses a formula 1000*chassis + port number. On top of it the PortDesc in LLDP MIB is an empty string, so cannot be used to correlate with IF-MIB::ifDescr. To illustrate: IF-MIB::ifIndex.1001 = INTEGER: 1001 IF-MIB::ifIndex.1002 = INTEGER: 1002 IF-MIB::ifIndex.1003 = INTEGER: 1003 [...] IF-MIB::ifIndex.1026 = INTEGER: 1026 IF-MIB::ifDescr.1001 = STRING: X450a-24t Port 1 IF-MIB::ifDescr.1002 = STRING: X450a-24t Port 2 IF-MIB::ifDescr.1003 = STRING: X450a-24t Port 3 [...] IF-MIB::ifDescr.1026 = STRING: X450a-24t Port 26 LLDP-MIB::lldpLocPortIdSubtype.1 = INTEGER: interfaceName(5) LLDP-MIB::lldpLocPortIdSubtype.2 = INTEGER: interfaceName(5) LLDP-MIB::lldpLocPortIdSubtype.3 = INTEGER: interfaceName(5) [...] LLDP-MIB::lldpLocPortId.1 = STRING: "1" LLDP-MIB::lldpLocPortId.2 = STRING: "2" LLDP-MIB::lldpLocPortId.3 = STRING: "3" [...] LLDP-MIB::lldpLocPortId.26 = STRING: "26" LLDP-MIB::lldpLocPortDesc.1 = STRING: LLDP-MIB::lldpLocPortDesc.2 = STRING: LLDP-MIB::lldpLocPortDesc.3 = STRING: [...] LLDP-MIB::lldpLocPortDesc.26 = STRING: The corresponding SQL field ports.ifName looks like "1:26", i.e. the port number is prefixed by a chassis number and a colon. So neither the SQL query on ifDescr ("") OR ifName ("26") can succeed, nor the query on ifIndex ("1026"). I ended up with a hackish workaround kludge in lldp-mib.inc.php : case 'interfaceName': $remote_port_id = dbFetchCell("SELECT `port_id` FROM `ports` WHERE (`ifDescr`= ? OR `ifName`= ?) AND `device_id` = ?",array($if, $id, $remote_device_id)); + if (!$remote_port_id && is_numeric($id) && $id < 1000) { + $remote_port_id = dbFetchCell("SELECT `port_id` FROM `ports` WHERE (`ifIndex`= ? OR `ifName`= ?) AND `device_id` = ?", array(1000+$id, "1:$id", $remote_device_id)); + } Actually there is also a Case 4, where lldpRemSysName shows a string "(none).(none)" instead of an empty string, when the (optional) system name is not configured. To fix: - if (empty($lldp['lldpRemSysName']) && $lldp['lldpRemChassisIdSubtype'] == 'macAddress') + if ((empty($lldp['lldpRemSysName']) || $lldp['lldpRemSysName'] == '(none).(none)') && $lldp['lldpRemChassisIdSubtype'] == 'macAddress') The affected devices were: Summit Extreme X450 switches (Case #3), a Quanta LY2R switch (the 'interfaceAlias' Case #2), and a Networking Operating System RackSwitch G7052 (the 'local', Case #1). Not sure what switch was connected there in Case 4, possibly a smaller Quanta, identifies as "armv5tejl/Linux 2.6.17.WB_WPCM450.1.3". The full patch is attached (I hope it survives the mailing list). If more information is needed I'd be gladly providing. Regards Mark

3 5

Support for these devices ?
by Jesper Frank Nemholt 29 Oct '15

29 Oct '15

Hi! Has anyone a status regarding support for these devices ? - Liebert MPX PDUs - ServerTech Sentry PDUs - Raritan PX2 PDUs In version 0.15.10.7107 they are just seen as generic devices, so no power specific information. /Jesper

3 5

Baytech PDU patch
by Aaron Finney 29 Oct '15

29 Oct '15

Hi all, Attached is a diff and related files to include support for Baytech PDUs. It was just an archaeology job on some of the other existing PDU discover/sensor files modified for the Baytechs, but it's working well for us. It'd be great to have it merged, or at least Baytech support added, so I can update without worrying about support for them being lost. :) Thanks, Aaron [someguy@observium-poc observium]# svn status ? html/images/os/baytech.png M includes/definitions/os.inc.php ? includes/discovery/os/baytech.inc.php ? includes/discovery/sensors/baytech-mib.inc.php ? includes/polling/os/baytech-pdu.inc.php ? mibs/baytech [someguy@observium-poc observium]# svn diff Index: includes/definitions/os.inc.php =================================================================== --- includes/definitions/os.inc.php (revision 6977) +++ includes/definitions/os.inc.php (working copy) @@ -3385,6 +3385,19 @@ $config['os'][$os]['mib_dirs'][] = "fiberroad"; $config['os'][$os]['mibs'][] = "XXX-MIB"; +// Baytech + +$os = "baytech-pdu"; +$config['os'][$os]['text'] = "Baytech PDU"; +$config['os'][$os]['type'] = "power"; +$config['os'][$os]['vendor'] = "Baytech"; +$config['os'][$os]['graphs'][] = "device_current"; +$config['os'][$os]['graphs'][] = "device_power"; +$config['os'][$os]['discovery_os'] = "baytech"; +$config['os'][$os]['mib_dirs'][] = "baytech"; +$config['os'][$os]['mibs'][] = "Baytech-MIB"; + + foreach ($config['os'] as $this_os => $blah) { if (isset($config['os'][$this_os]['group'])) [someguy@observium-poc observium]# -- *Aaron Finney | **Network Engineer* 888 East Walnut Street, 2nd Floor | Pasadena, CA 91101 office: +1 (626) 466-1141 x6035 Watch how we make online advertising simple: http://bit.ly/Ent_vid www.openx.com | follow us on: Twitter <http://www.twitter.com/> Facebook <http://www.facebook.com/> LinkedIn <http://www.linkedin.com/>

2 2

Fwd: Custom Email Alerts
by consultancy＠lenstewart.com 28 Oct '15

28 Oct '15

Begin forwarded message: > From: "consultancy(a)lenstewart.com" <consultancy(a)lenstewart.com> > Date: 28 October 2015 at 15:55:57 GMT+1 > To: observium(a)observium.net > Subject: Custom Email Alerts > > Hello community. > > I am looking to customize the email alerts to contain specific detail that are not there by default. > > Specifically regarding BGP alerting, I need the system to push out additional peer info such as a peer name (not only an IP). Is there a way to support this either directly or via a script with a lookup? > > Thanks.

1 0

Observium Alert to Nagios
by consultancy＠lenstewart.com 28 Oct '15

28 Oct '15

Hello Community. Can alerts be somehow integrated with Nagios? Either by SNMP or script? Our NOCs primary interface is Nagios/CheckMK. Thanks.

1 0

Flush process causing slow performace
by Johnson, Edward A. 27 Oct '15

27 Oct '15

Since upgrading PHP to 5.4, Observium has loaded very slowly at times. Most of the time just a refresh of the homepage will take .150 seconds but occasionally it can take up to a minute to load. Running iotop shows the Flush process running taking up 99.99% IO which directly correlates to the slow page loads. Can anyone shed some light on a way to resolve this?

3 7

Log Names of non discoverable Host in autodiscover
by Serge Müller 26 Oct '15

26 Oct '15

Hi, is there any way to find out which host have been found through autodiscovery but could not be queried by snmp or aren't reachable via ICMP? Since we have lots of people working on our network, i do not always know if someone plugs in new switches or routers, especially not if they forget to configure the acls or snmp. The Observium log only shows "added x Hosts to ..." but no failures, running discovery.php -d -h all is a bit too loud and takes quite to long. Any suggestions? regards Serge

2 1

SNMP extensions : distro ... and others ?
by Massimo.Sala＠asl.bergamo.it 24 Oct '15

24 Oct '15

hi ! On the linux guests, you can tweak the snmpd.conf as extend .1.3.6.1.4.1.2021.7890.1 distro "/bin/cat /etc/debian_version" so Observium detects the host OS. Is it possible to set other "devices" values, like purpose and serial, via SNMP extensions ? It seems these columns aren't used. best regards, Sala

2 1

BGP Alert Checks
by Aaron Hite 23 Oct '15

23 Oct '15

Team, I need some guidance. I have spent some time on the web trying to find examples of how to configure a alert checker to tell me when a BGP peer is Admin up but not working. We have quite a few peers in our environment that are Admin down and I just want to ignore those. I have tried many variations of the checker, but must be missing something. Here is a screenshot of the latest attempt. My device and entity match are set to “*”. If I change the condition or any instead of all, I seem to get alerts that are not correct as they are including peer states that are admin down. Any guidance would be appreciated. Thanks, Aaron

3 6

simple api to check for hostname / IP address / SOLVED
by Massimo.Sala＠asl.bergamo.it 23 Oct '15

23 Oct '15

I solved with this hack : wget http://servername/graph.php?height=102&width=226&type=device_ping&legend=no… in config.php : enable access to images best regards, Sala --- Is it possible with some URL-fu or simple REST API to check if a hostname and / or IP is in Observium ? The goal is to put this check inside some bash scripts. best regards, Sala

2 1

win srv in VM not listed as srv ( rename device, it disappears from "Servers" view )
by Massimo.Sala＠asl.bergamo.it 23 Oct '15

23 Oct '15

Hi I have a Windows 2003 server, virtual, not listed under "Servers" view. We have many Windows 2003 servers, most of all as guests under Vmware ESX. One of this is listed only in the "All devices" view. To the developers : please, can you give me any insight : how does Observium decide the kind of device ? What I have to check to pinpoint the problem ? Best regards, Sala

2 2

WMI
by Ryan Bones 22 Oct '15

22 Oct '15

Hi All, Trying to monitor some simple Windows Server services (Exchange, SQL). Followed the instructions here to no avail: http://jira.observium.org/secure/attachment/11319/WMIPoller-011013-1429-4.p… When I compile the package wmic never goes in the bin directory. And if I poll the servers I get no new info. Observium 0.15.10.7107 (17th October 2015) OS Linux 3.19.0-25-generic [amd64] (Ubuntu 14.04) Apache 2.4.7 (Ubuntu) PHP 5.5.9-1ubuntu4.12 Python 2.7.6 MySQL 5.5.44-0ubuntu0.14.04.1 (extension: mysqli 5.5.44) SNMP NET-SNMP 5.7.2 RRDtool 1.4.7 Thanks, Ryan Ryan Bones | [http://www.taittowers.com/logo/TAIT_Global_Logo.gif] Network Manager T | +1 717-626-9571 M | +1 717-368-7782 www.taittowers.com<http://www.taittowers.com/>

2 1

Junos Pseudowires
by Σταύρος Κρουστούρης 22 Oct '15

22 Oct '15

Hello, We (GRNET) have created a patch for observium in order to get the pseudowires to work in junos devices. How could I merge it to upstream (in case you want it of course)? -- ----------------------------------------------------------------------- Stavros Kroustouris - staurosk(a)noc.grnet.gr GRNET NOC WEB APPLICATION DEVELOPER - http://noc.grnet.gr -----------------------------------------------------------------------

2 1

simple api to check for hostname / IP address
by Massimo.Sala＠asl.bergamo.it 22 Oct '15

22 Oct '15

Hi Is it possible with some URL-fu or simple REST API to check if a hostname and / or IP is in Observium ? The goal is to put this check inside some bash scripts. best regards, Sala

1 0

view all interfaces listed by IP addresses
by Massimo.Sala＠asl.bergamo.it 22 Oct '15

22 Oct '15

Hi Is it possible to view all devices, listed by their interfaces' IP addresses ? It will be very useful to look-up, at a glance, where a IP address is : just click on it to open its device parent. best regards, Massimo

1 0

RRD Error: Error Drawing Graph
by Greg Lipschitz 22 Oct '15

22 Oct '15

Hi All, We've gone to add in some devices today and they are collecting and polling fine, just getting the error "Error Drawing Graph" Looking at the RRD Output it gives this debug; RRDTool Output: ERROR: String ends after the = sign on 'CDEF:inB=' Here is the command; rrdtool graph /tmp/nW5egDfAQJQJzjxw.png -g --alt-autoscale --rigid --start 1445423655 --end 1445510055 --width 1159 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DroidSansMono,DejaVuSansMono' --font AXIS:7:'DroidSansMono,DejaVuSansMono' --font-render-mode normal -E CDEF:inB= CDEF:outB= CDEF:octets=inB,outB,+ CDEF:doutB=outB,-1,* CDEF:inbits=inB,8,* CDEF:outbits=outB,8,* CDEF:bits=inbits,outbits,+ CDEF:doutbits=doutB,8,* VDEF:95thin=inbits,95,PERCENT VDEF:95thout=outbits,95,PERCENT VDEF:d95thout=doutbits,5,PERCENT VDEF:totin=inB,TOTAL VDEF:avein=inbits,AVERAGE VDEF:totout=outB,TOTAL VDEF:aveout=outbits,AVERAGE VDEF:tot=octets,TOTAL COMMENT:' \l' HRULE:999999999999999#FFFFFF:'Total Rx' GPRINT:inbits:LAST:%6.2lf%s GPRINT:inbits:AVERAGE:%6.2lf%s GPRINT:inbits:MIN:%6.2lf%s GPRINT:inbits:MAX:%6.2lf%s GPRINT:totin:%6.2lf%sB COMMENT:'\l' HRULE:999999999999999#FFFFFF:' Tx' GPRINT:outbits:LAST:%6.2lf%s GPRINT:outbits:AVERAGE:%6.2lf%s GPRINT:outbits:MIN:%6.2lf%s GPRINT:outbits:MAX:%6.2lf%s GPRINT:totout:%6.2lf%sB COMMENT:'\l' HRULE:999999999999999#FFFFFF:' Agg' GPRINT:bits:LAST:%6.2lf%s GPRINT:bits:AVERAGE:%6.2lf%s GPRINT:bits:MIN:%6.2lf%s GPRINT:bits:MAX:%6.2lf%s GPRINT:tot:%6.2lf%sB COMMENT:'\l' HRULE:0#999999 Currently on build 0.15.7.6706 Cheers, Greg Greg Lipschitz | Director | The Summit Group E: Greg(a)thesummitgroup.com.au<mailto:Greg@thesummitgroup.com.au> | W: www.thesummitgroup.com.au<http://www.thesummitgroup.com.au> The Summit Group (Australia) Pty Ltd | P: 1300 049 749 | Level 1, 39 Railway Road, Blackburn VIC 3130 The Summit Group (USA) LLC | P: 321 216 3844 | Suite 1003, 364E Main Street, Middletown DE 19709 Postal: P.O. Box 3225, Doncaster East VIC 3109 Follow us on Facebook<http://www.facebook.com/thesummitgroup/> | LinkedIn<http://www.linkedin.com/company/1942329> | Twitter<http://twitter.com/summitgroupau/>

1 0

Feature request + issues with NetApp cDot and EMC Isilon
by Jesper Frank Nemholt 22 Oct '15

22 Oct '15

Hi Not sure if there is a better place for feature requests, but here it goes : 1. In the group option it would be great to be able to create subgroups and assign/re-assign, so different measures related to the same infrastructure or area can be kept together. 2. Currently it is not possible to rename a group. Would be nice to have this option. 3. Would be great to have some simple functions / regex related to the group graphs to allow consolidating & filtering the data further. Right now it will either aggregate/stack data depending on what it is and it would be more flexible to have some control over this. Also being able to give the aggregated data some more meaningful data labels would be nice. Some time back I asked about NetApp cDOT support....got no answer but saw on the forum that someone was looking into this several months back. Right now the cDOT support is very limited as the MIB is different compared to standard OnTAP and it allow for multiple controller pairs in the same cluster. Any news on what the status is ? Same story for Isilon, here all the server data is gathered, but with complete unawareness of the nodes being in a cluster.... so the only way to get cluster data properly recorded & presented is to create a group for all nodes and create aggregated graphs. Anyone using Observium with IBM GPFS (ESS) ? /Jesper

1 0

Re: [Observium] BGP Alert Checks
by Moerman, Maarten 21 Oct '15

21 Oct '15

https://github.com/mgmoerman/docs/blob/master/observium-alert-checkers.md There's a BGP example there. This works on both Juniper & Cisco with Ipv4 & IPv6 (there's some details on this, in a thread on this mailing list) Maarten -- Maarten Moerman | Mgr, Network Engineering | eBay Classifieds | +31-655122247 | mmoerman(a)ebay.com From: observium on behalf of Aaron Hite Reply-To: Observium Network Observation System Date: Wednesday, October 21, 2015 at 4:32 PM To: "observium(a)observium.org<mailto:observium@observium.org>" Subject: [Observium] BGP Alert Checks Team, I need some guidance. I have spent some time on the web trying to find examples of how to configure a alert checker to tell me when a BGP peer is Admin up but not working. We have quite a few peers in our environment that are Admin down and I just want to ignore those. I have tried many variations of the checker, but must be missing something. Here is a screenshot of the latest attempt. My device and entity match are set to “*”. If I change the condition or any instead of all, I seem to get alerts that are not correct as they are including peer states that are admin down. Any guidance would be appreciated. Thanks, Aaron

2 1

FW: Correct metrics for storage_free checker
by Hilco de Lathouder 21 Oct '15

21 Oct '15

Hi, I'd like to use the storage_free (instead of storage_perc) to get an alert if disk space is below 500 MB. What kind of units are used (byts/mb/kb/gb) ? I was thinking the rule would be like 'storage_free lt 500' if it's in megabytes. Or should i use 'gb' or 'mb' in the equation? Regards, Hilco

2 1

Observium CE / rename device, it disappears from "Servers" view
by Massimo.Sala＠asl.bergamo.it 21 Oct '15

21 Oct '15

Hi Command used : /opt/observium/rename_device.php azimuth3 srvbggwer004 Host azimuth3 renamed to srvbggwer004 I see the server under Devices | All devices, but it disappears from "Servers". Also naming back to "azimuth3" doesn't solve. Is there a database hack to place the host in the right category ? Observium CE 0.15.6.6430 best regards, Sala

1 0

Request: Add a device proactively
by Nate Mellendorf 20 Oct '15

20 Oct '15

Observium team, I just finished pre-deploying a few routers for a new client, and I'm adding each one to our monitoring platforms in advance. As they're offline, I'll be unable to add them to Observium until they respond to SNMP / ICMP. Is there a way I could add these proactively, and work around the error that Observium pushes our by default? Ideally, I'd like to add them all now, disable their alerts, and enable them when they're deployed and connectivity is in place. I see you have a Ignore RRD checkbox on the add device page. I wonder if we could have another that says, "Add even though device is offline"? As always, thank you for your feedback and time on this. Regards, Nate Mellendorf | Network Analyst | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 <http://www.netgainhosting.com/> www.NetgainHosting.com _____ The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure. If you have received this message in error, please notify the sender immediately and delete the original. Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited.

7 8

Asterisk DAHDI monitoring
by Pieter De Wit 19 Oct '15

19 Oct '15

Hi Guys, Can we please add DAHDI monitoring to the asterisk agent ? As per http://jira.observium.org/browse/OBSERVIUM-655?focusedCommentId=12588&page=… [1] I will gladly supply a patch to the agent file, if someone can "extend" the view of Asterisk to include dahdichannels and dahdiactive Thanks, Pieter Links: ------ [1] http://jira.observium.org/browse/OBSERVIUM-655?focusedCommentId=12588&p…

1 0

Alert on missing CDP/LLDP neighbor
by Spencer Ryan 19 Oct '15

19 Oct '15

Is is possible to alert on a specific CDP/LLDP neighbor going away? *Spencer Ryan* | Senior Systems Administrator | sryan(a)arbor.net *Arbor Networks* +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com

1 0

Re: [Observium] Request: Add a device proactively
by Nate Mellendorf 19 Oct '15

19 Oct '15

I was going to do something simular, but thought I'd request a feature add. When I deploy my devices, I deploy them with a script that's been standardized / approved. Setting up DHCP would be possible, but it adds additional steps (prone to user error) and may not be possible for all Observium users. I can see why you may not want to add it, but I feel it would be a really nice time saver for future deployments. You configured Observium to say no, I wont poll you if I can't find you. I think this is a little bit of a grey area, where we know it'll be there eventually. Just my two cents. Thanks again Adam for the consideration. ---------------------------------------------------------------------- Message: 1 Date: Mon, 19 Oct 2015 08:27:26 -0700 From: Robbie Wright <robbie(a)siuslawbroadband.com> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Request: Add a device proactively Message-ID: <CADTKZWZ8kbo7ZU8KAnbANzvh+udkEAaC9Bg05zm+V2AxqZZYmg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" The way we currently handle this, since all of the devices require dns, is to pre-provision the device on a dhcp network and set dns to the temporary dhcp address. We can do the full config on the on the device, ship it, and when it is in its new location (or while it is being shipped) update dns to the new static IP you pre-provisioned and then when it is plugged in, all should be good with the world. In theory. Most of the time. Robbie Wright Siuslaw Broadband <https://siuslawbroadband.com> 541-902-5101 On Mon, Oct 19, 2015 at 8:14 AM, Matt Ladewig <matt(a)univoip.com> wrote: > I?m in favor of having an offline device add option. We would be able > to add the device to Observium as part of the normal provisioning > workflow, instead of post activation. > > > > *From:* observium [mailto:observium-bounces@observium.org] *On Behalf > Of *Adam Armstrong > *Sent:* Monday, October 19, 2015 8:10 AM > *To:* observium(a)observium.org > *Subject:* Re: [Observium] Request: Add a device proactively > > > > Hmm... I'm not sure about this. What do other people think? > > > > adam. > > On 19/10/2015 16:07:40, Nate Mellendorf < > nate.mellendorf(a)netgainhosting.com> wrote: > > Observium team, > > > > I just finished pre-deploying a few routers for a new client, and I?m > adding each one to our monitoring platforms in advance. > > As they?re offline, I?ll be unable to add them to Observium until they > respond to SNMP / ICMP. > > > > Is there a way I could add these proactively, and work around the > error that Observium pushes our by default? > > Ideally, I?d like to add them all now, disable their alerts, and > enable them when they?re deployed and connectivity is in place. > > > > I see you have a Ignore RRD checkbox on the add device page. I wonder > if we could have another that says, ?Add even though device is offline?? > > > > As always, thank you for your feedback and time on this. > > > > > > Regards, > > > > *Nate Mellendorf **|* *Network Analyst **|* *Netgain* > 720 West Saint Germain Street | St. Cloud | MN | 56301 > Phone: 320.251.4700 x183 *|* 877.797.4700 x183 > *www.NetgainHosting.com* <http://www.netgainhosting.com/> > > > ------------------------------ > > The information contained in this email message is for the designated > recipient only and may be privileged, confidential, and protected from > disclosure. If you have received this message in error, please notify > the sender immediately and delete the original. Any dissemination, > distribution, copying or other use of this message or any information > contained within is strictly prohibited. > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >

1 0

Observium CE, housekeeping.php parameters
by Massimo.Sala＠asl.bergamo.it 19 Oct '15

19 Oct '15

Hi ! Reading http://www.observium.org/docs/housekeeping/ -b Cleans up stale entries in the database. Sometimes entries get left behind when devices are removed, this will clean them up. It seems the switch is missing : /opt/observium/housekeeping.php Observium CE 0.15.6.6430 HouseKeeping USAGE: housekeeping.php [-Vyaserptd] [-A <age>] I don't know if the web page is outdated, or I have to update our installation. Please help ! best regards, Sala

2 1

Re: [Observium] Request: Add a device proactively
by Massimo.Sala＠asl.bergamo.it 19 Oct '15

19 Oct '15

Also for me it is useful to add a device even if "dead". If you prefer, add a switch to add_device.php --no-snmp don't check device online So only the wise guys will force it. best regards, Massimo

1 0

Re: [Observium] observium Digest, Vol 63, Issue 65
by Dudu Handelman 19 Oct '15

19 Oct '15

I think it's a solid idea. With other systems i made it in the past. its very useful while you are building a new rack you know that all is up at the end or even during the install. Sent from my Samsung device -------- Original message -------- From: observium-request(a)observium.org Date: 19/10/2015 18:15 (GMT+02:00) To: observium(a)observium.org Subject: observium Digest, Vol 63, Issue 65 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: Request: Add a device proactively (Adam Armstrong) 2. Re: Request: Add a device proactively (Matt Ladewig) ---------------------------------------------------------------------- Message: 1 Date: Mon, 19 Oct 2015 16:09:45 +0100 From: "Adam Armstrong" <adama(a)memetic.org> To: "" <observium(a)observium.org> Subject: Re: [Observium] Request: Add a device proactively Message-ID: <ba9da84a-386c-4c21-86a7-fdc71ba98e44(a)getmailbird.com> Content-Type: text/plain; charset="utf-8" Hmm... I'm not sure about this. What do other people think? adam. On 19/10/2015 16:07:40, Nate Mellendorf <nate.mellendorf(a)netgainhosting.com> wrote: Observium team, ? I just finished pre-deploying a few routers for a new client, and I?m adding each one to our monitoring platforms in advance. As they?re offline, I?ll be unable to add them to Observium until they respond to SNMP / ICMP. ? Is there a way I could add these proactively, and work around the error that Observium pushes our by default? Ideally, I?d like to add them all now, disable their alerts, and enable them when they?re deployed and connectivity is in place. ? I see you have a Ignore RRD checkbox on the add device page. I wonder if we could have another that says, ?Add even though device is offline?? ? As always, thank you for your feedback and time on this. ? ? Regards, ? Nate Mellendorf | Network Analyst | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 www.NetgainHosting.com [http://www.netgainhosting.com/] The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure.? If you have received this message in error, please notify the sender immediately and delete the original.? Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited.?????????????? ?

1 0

DB Errors
by Eduardo Schoedler 19 Oct '15

19 Oct '15

Hi, I have upgraded now to 6655 and I saw an db error. Updated to revision 6655. Observium 0.15.7.6655 Discovery -- Updating database/file schema 203 -> 204 ... (db) done (1 errors). -- Done Looking the logs/db.log file: [2015/07/09 21:46:19 -0300] poller.php(1595): Failed dbQuery (#1062 - Duplicate entry '73-4006-001exxxxxxxx' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('73','4006','17112','001exxxxxxxx','learned') [2015/07/09 21:46:19 -0300] poller.php(1595): Failed dbQuery (#1062 - Duplicate entry '73-4006-0022yyyyyyd3' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('73','4006','17112','0022yyyyyyd3','learned') ... [2015/07/15 11:49:52 -0300] discovery.php(12686): Failed dbQuery (#1071 - Specified key was too long; max key length is 1000 bytes), Query: ALTER TABLE `slas` DROP INDEX `unique_key`, ADD UNIQUE `unique_key` (`device_id`, `sla_mib`, `sla_index`, `sla_owner`); Can you verify, please? Thanks. -- Eduardo Schoedler

2 6

Cannot see ospf or bgp related graphs on Nexus 9000 and MX 480
by George Philip 19 Oct '15

19 Oct '15

Hi,I have installed Observium and have ospf and bgp related polling ,discovery parameters in the config.php file. However, I am unable to see the routing protocol related graph in the web page. Is there anything else that I need to do as I have these protocols running on the Nexus 9000 and MX480 router. Thanks,George

1 0

Juniper QFX 10G ports discovered as 4.29G
by Aaron Finney 18 Oct '15

18 Oct '15

Just FYI, the 10G ports on a QFX 5100 running latest JunOS are being reported with a speed of 4.29Gbps, which I assume is likely the actual returned value being constrained by a 32-bit container? Not a critical thing for us to fix - I was actually disabling polling for all of our Juniper vcp stacks in Observium (most of them take > 300s to complete a polling cycle) but noticed this as I was going through them and figured I'd pass it along. Cheers, Aaron

6 9

Re: [Observium] Tripplite PDUMNH20 (power strips)
by Ralph Pursifull 17 Oct '15

17 Oct '15

Great progress. Data now appears in RRD, just it’s off by 10 X. Plots show 1.1, correct answer is 11.0 Amps. When I look at the device with iReasoning MIB browser, using the UPS-MIB supplied by TrippLite, or the UPS-MIB from Observium, it says: integer: 11 See attached. Seems most of the MIB files mention units of “0.1 RMS Amp”. Not sure what that does. Any way to resolve this? upsOutputCurrent OBJECT-TYPE SYNTAX NonNegativeInteger UNITS "0.1 RMS Amp" MAX-ACCESS read-only STATUS current DESCRIPTION "The present output current." ::= { upsOutputEntry 3 } From: Mike Stupalov [mailto:mike@stupalov.ru] Sent: Friday, October 16, 2015 4:23 PM To: Ralph Pursifull <ralph(a)palamida.com> Cc: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Tripplite PDUMNH20 (power strips) I see that Current output already discovered (with value 1.1): Discover sensor: current, pdu72, .1.3.6.1.2.1.33.1.4.4.1.3.1, upsOutputEntry.1, ups-mib, Output, SCALE: 0.1, LIMITS: (, , , ), CURRENT: 1.1 But I fix (clean) some incorrectly discovered sensors in r7105. On Sat, Oct 17, 2015 at 1:20 AM, Ralph Pursifull <ralph(a)palamida.com<mailto:ralph@palamida.com>> wrote: Here you go. Thanks for your help on this. From: observium [mailto:observium-bounces@observium.org<mailto:observium-bounces@observium.org>] On Behalf Of Mike Stupalov Sent: Friday, October 16, 2015 3:07 PM To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Subject: Re: [Observium] Tripplite PDUMNH20 (power strips) Hi, observium already have mostly support for UPS-MIB including upsOutputCurrent. Seems as something wrong in snmpwalk output. Send me debug output for: ./discovery.php -d -m sensors -h <this_device> On Sat, Oct 17, 2015 at 12:21 AM, Ralph Pursifull <ralph(a)palamida.com<mailto:ralph@palamida.com>> wrote: Hi Adam, Still have a problem with a fresh Professional install of “current” observium/trunk. Situation: For a Tripplite PDUMNH20 (power strip) we want to display total current. This will help us manage power consumption in our remote rack at the colo site, where we pay directly for amps. Latest “current” Observium page generated for PDUMNH20 attempts to display a “Current” plot in the upper right. Unfortunately all values are “0” with units of “–nan”. TrippLite Support tells me we want this data item from the UPS-MIB. Name: upsOutputCurrent.1 OID: .1.3.6.1.2.1.33.1.4.4.1.3.1 Data : 4 Descroption: The present output current. Please can you plot that one? What OID are you trying to plot? What is cost of fix? Happy to go that route. Ralph From: observium [mailto:observium-bounces@observium.org<mailto:observium-bounces@observium.org>] On Behalf Of Adam Armstrong Sent: Thursday, October 08, 2015 1:04 PM To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Subject: Re: [Observium] Tripplite PDUMNH20 (power strips) Hi Ralph, Its possible this is already fixed in the current subscription edition. If not, you have two options (both of which require having a subscription!): Hope we fix it once you confirm its not fixed in subscription. Pay someone for a couple of hours work to fix it. The choice between the two is usually based on how much you want the fix :) I vaguely recall some triplite stuff changing in the recent past, so chances are it's fixed already. I don't have any of those devices though, so can't say for certain with looking into it a little further. Adam. Sent with AquaMail for Android http://www.aqua-mail.com On 8 October 2015 8:37:53 pm Ralph Pursifull <ralph(a)palamida.com<mailto:ralph@palamida.com>> wrote: Hi. New to this list, so please excuse if I break etiquette. For couple years we happily used Observium to monitor and track current through our Tripplite PDUMNH20. Thanks to you all for Observium. Life was OK, but the integrated Tripplite SNMPWEBCARDs had problems from time to time. Tripplite rolled out new firmware (currently 12.06.0065) and that issue was resolved. (SNMPWEBCARD is a component used in many of their products.) Unfortunately, now current plots as a flat line at 0. I’ve worked with Tripplite support to verify some data is present with snmpwalk. But probably not where Observium expects to find it. My guess is the firmware change switched to a new mib. I’ve tried to delete devices, update Observium and recreate… no luck. Tripplite currently provides these two MIBs http://www.tripplite.com/shared/software/Firmware/UPS-MIB-Definitions.txt http://www.tripplite.com/shared/software/Firmware/Tripp-Lite-MIB-Definition… Would be happy to switch to Professional, buy support, whatever is needed to restore ability to plot Current over time from Tripplite PDUMNH20. Any good advice? _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium%40observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium<http://postman.memetic.org/cgi-bin/mailman/listinfo/observium> _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov http://observium.org/

2 1

Tripplite PDUMNH20 (power strips)
by Ralph Pursifull 17 Oct '15

17 Oct '15

Hi. New to this list, so please excuse if I break etiquette. For couple years we happily used Observium to monitor and track current through our Tripplite PDUMNH20. Thanks to you all for Observium. Life was OK, but the integrated Tripplite SNMPWEBCARDs had problems from time to time. Tripplite rolled out new firmware (currently 12.06.0065) and that issue was resolved. (SNMPWEBCARD is a component used in many of their products.) Unfortunately, now current plots as a flat line at 0. I've worked with Tripplite support to verify some data is present with snmpwalk. But probably not where Observium expects to find it. My guess is the firmware change switched to a new mib. I've tried to delete devices, update Observium and recreate... no luck. Tripplite currently provides these two MIBs http://www.tripplite.com/shared/software/Firmware/UPS-MIB-Definitions.txt http://www.tripplite.com/shared/software/Firmware/Tripp-Lite-MIB-Definition… Would be happy to switch to Professional, buy support, whatever is needed to restore ability to plot Current over time from Tripplite PDUMNH20. Any good advice?

3 4

Add Bill to Normal User & Password Change for normal User
by Basile Bluntschli 16 Oct '15

16 Oct '15

Hi All 1) I no longer can add a bill to a normal user. While the dropdown menu is there, I can select the bill, but it does not get saved by clicking on ADD. 2) Where is a normal User able to change its password? URL? Running 7097 Thanks a lot Basile

3 3

Escaped sysContact not being escaped properly
by Spencer Ryan 16 Oct '15

16 Oct '15

I've got several UBNT devices all running EdgeMax 1.7.0 It appears that they escape the sysContact (and a few other fields) in quotes even if they don't have spaces in them. Observium seems to eat the first one properly but not the second. snmpwalk -Os -c public -v 2c router01 1.3.6.1.2.1.1.4 iso.3.6.1.2.1.1.4.0 = STRING: "\"hostmaster(a)arbor.net\"" However in the UI I see this: sysContact*=>*hostmaster(a)arbor.net\ Which causes email notifications to fail, because of the bad email address. Any hope? *Spencer Ryan* | Senior Systems Administrator | sryan(a)arbor.net *Arbor Networks* +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com

2 2

Ignore Statuses Possible?
by Tim Calvin 15 Oct '15

15 Oct '15

Hello We have a few AC powered Foundry FWS-24 switches. Observium is showing alerts for the secondary power supply and fans under statuses. Is there anyway to ignore these? I tried poking around and couldn’t find anything that would do the trick. I don’t even think they have secondary power supplies and fans. Maybe in another hardware configuration but certainly not ours. I have attached a screenshot. Running Observium Professional 0.15.10.7072

3 2

dlink DGS-1100-24 only found as generic
by Simon Smith 15 Oct '15

15 Oct '15

Hi All, our new D-Link DGS-1100-24 switches are only being discovered as generic device but strangely enough its finding 1 vlan? the syObjectID is being found as .1.3.6.1.4.1.171 but i can see inside os.inc.php the sysObjectID is already included as D-Link-Generic (Line:1950) even tho it could be put under the D-Link Switch (Line:1927) i have included a run poller.php and discover.php commands here - http://pastebin.com/8iKYU16N can the great and wonderful people working at Observium please help :-) Regards Simon - Hestor Ltd

2 3

Re: [Observium] Cannot see ospf or bgp info
by George Philip 15 Oct '15

15 Oct '15

Hi Adam,I am using Nexus 9k's and MX 480 with ospf and bgp. I am not sure why I don't any protocol related information on Observium. Thanks,George From: Adam Armstrong <adama(a)observium.org> To: George Philip <gkonapoz(a)yahoo.com> Sent: Wednesday, October 14, 2015 12:33 PM Subject: Re: [Observium] Cannot see ospf or bgp info Hi George,These features will only becomevisible in the ui once a device which supports them has been discovered andpolled.The devices need to supportbgp4-mib and ospf-mib.Thanks, Adam.Sent with AquaMail for Android http://www.aqua-mail.com On14 October 2015 4:11:30 pm George Philip <gkonapoz(a)yahoo.com> wrote: Hi,I installed Observium and have enabledthe bgp and ospf polling. However, I do not see the option of seeing thatinfo from the gui. I can see graphs on traffic but I cannot see any titlefor ospf or bgp. Also, I do not any entries for arp or mac table. Do I need to have license for thesefeatures ? Thanks, George_______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Cannot see ospf or bgp info
by George Philip 14 Oct '15

14 Oct '15

Hi,I installed Observium and have enabled the bgp and ospf polling. However, I do not see the option of seeing that info from the gui. I can see graphs on traffic but I cannot see any title for ospf or bgp. Also, I do not any entries for arp or mac table. Do I need to have license for these features ? Thanks, George

1 0

Obervium web page not coming up
by George Philip 14 Oct '15

14 Oct '15

Hi,I installed Observium on Centos and I added devices also successfully.Somehow, the webpage is not coming up and I followed the instruction mentioned in the webpage.My file /etc/http/conf/httpd.conf looks as follows: # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. admin(a)your-domain.com # #ServerAdmin root@localhost # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # <VirtualHost *:80> DocumentRoot /opt/observium/html/ ServerName asvobs02.abcd.io CustomLog /opt/observium/logs/access_log combined ErrorLog /opt/observium/logs/error_log <Directory "/opt/observium/html/"> AllowOverride All Options FollowSymLinks MultiViews </Directory> </VirtualHost> Thanks, George

3 6

Service monitoring feature
by Stephen Penfold 14 Oct '15

14 Oct '15

Hi Guys, I know service monitoring (nagios plug-in) is now deprecated and removed however just curious if there will be any chance of the feature being developed in future? Would be nice to do away with Nagios and have Observium as our all-in-one monitoring solution ☺ Cheers Stephen Penfold Helpdesk Support Assistant Tel: +61 7 5553 5995 Email: Stephen.Penfold(a)careflight.org.au Web: www.careflight.org.au Address: PO Box 5078, Robina, QLD, 4230 [cid:imagec15b3f.JPG@2e3eebe0.45828f54] <http://www.careflight.org.au> [cid:image91d517.PNG@d77d9f73.42982d3b]<https://www.facebook.com/RACQCareFlight> [cid:imaged92729.PNG@c049b465.42a799e2] <https://twitter.com/CareFlightQLD> [cid:image0c3b01.PNG@d1cb199d.4586a257] <https://instagram.com/racqcareflightrescue/> [cid:image7cbb03.PNG@733799ae.4b9641ad] <https://www.youtube.com/user/careflightgroup> [cid:image86e2db.PNG@642ee964.48aeeeac] <https://www.linkedin.com/company/careflight-group-queensland> [cid:image110385.PNG@c4d861a6.498f72f2]<http://newsletter.brightlabs.com.au/h/r/4FBDC674FBFB389D> This communication including any file attachments is intended solely for the use of the individual or entity to whom it is addressed. If you are not the intended recipient, or the person responsible for delivering this communication to the intended recipient, please immediately notify the sender by email and delete the original transmission and its contents. Any unauthorised use, dissemination, forwarding, printing, or copying of this communication including any file attachments is prohibited. It is your responsibility to scan this communication including any file attachment for viruses and other defects. To the extent permitted by law, CareFlight Group and its associates will not be liable for any loss or damage arising in any way from this communication including file attachments.

1 0

Switch uptime
by Eduardo Schoedler 14 Oct '15

14 Oct '15

Hi, Is there a problem with switches uptime? [image: Imagem inline 2] # /usr/bin/snmpget -v2c -c 'xxxxxxxx' -Pu -OQUst -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'my-host':'161' sysObjectID.0 sysUpTime.0 sysObjectID.0 = enterprises.4413 sysUpTime.0 = 227811800 # snmpwalk -v 2c -c xxxxxxxx my-host sysUpTime DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (227812500) 26 days, 8:48:45.00 Thank you. -- Eduardo Schoedler

1 0

10gbps port showing as 10bps
by Cameron Murray 12 Oct '15

12 Oct '15

As the subject says we've recently installed a 10gbps Dell switch and the ports are showing as bps not gbps. ALERT Modify<http://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5…> Alert Utilization has exceeded 80% Entity tengigabitethernet1/0/1<http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/> Conditions ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740) Metrics ifInOctets_perc = 623770 ifOutOctets_perc = 631740 Duration 3 days, 1h 13m 43s (2015-09-28 13:43:41) Device Device bne-be-l2r16-sw10g<http://cacti.bettacomputers.com.au/device/device=99/> Hardware Operating System Generic Device Location Uptime 3 days, 3h 46m 24s The ports that are trained up as 1gbps show correctly however higher do not. Port Data: port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 ) Regards, Cameron Murray Remote Support Engineer How am I doing? Please click here<http://www.techpath.com.au/contact-us/feedback/> to rate my work. [cid:image001.png@01D1000F.A5564960]<http://www.techpath.com.au/> P 1300 033 300 F 07 3809 3999 E cameron(a)techpath.com.au www.techpath.com.au<http://www.techpath.com.au> Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]<http://www.facebook.com/techpathau> [Twitter]<http://twitter.com/techpathau> [LinkedIn]<http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd.

6 20

Problem adding user to view a port / vlan
by Stephen Bateman 11 Oct '15

11 Oct '15

Hi Everyone, Is there a procedure for adding a single user who I want to see vlan traffic statistics and the ports on a switch. I have tired creating a normal user which worked fine. However when I select the device and the port and click Add nothing happens. When I click refresh it still says "This user currently has no permitted ports" Any help would be appreciated, I am using the Professional version 0.15.10.7095 Thanks Stephen

1 0

Re: [Observium] email alert showing device_ping
by Gavin Henry 11 Oct '15

11 Oct '15

You might want you have scrubbed that image or fixed your firewall: https <https://proxmox.zeplin.co.uk:8006/#v1:0:18:4::::>:// <https://proxmox.zeplin.co.uk:8006/#v1:0:18:4::::>proxmox.zeplin.co.uk <https://proxmox.zeplin.co.uk:8006/#v1:0:18:4::::>:8006/#v1:0:18:4:::: <https://proxmox.zeplin.co.uk:8006/#v1:0:18:4::::>::

2 1

email alert showing device_ping
by Simon Smith 11 Oct '15

11 Oct '15

Hi All, has anybody noticed the weird alerts being sent by email or is it just myself with this issue? I have an alert setup to tell me if device_uptime is between 0 and 600 then alert me (rebooted kit/server) however the email is showing the words device_ping under the email alerts where a graph would show if the alert had a graph attached a screenshot to show you what i mean regards Simon

1 0

aggregate graphs
by Jeffrey d'Ambly 09 Oct '15

09 Oct '15

Is there way to create aggregate graphs using graph.php? —Jeff

2 4

Orphaned ports
by Aaron Mayfield 09 Oct '15

09 Oct '15

I've been digging around in my database, trying to figure out why I have a large number of ports listed in my observium interface, compared to the number of devices I have. I have discovered several devices that were removed (via delete_device.php) a while back, but it seems that the ports table wasn't completely cleaned up. These devices were removed from the devices table: mysql> select * from devices where device_id in(45,66,67,68,69,70,71,72,73); Empty set (0.00 sec) mysql> But the ports for these devices weren't entirely removed: mysql> select device_id,count(*) as "number of ports" from ports where device_id IN(45,66,67,68,69,70,71,72,73) group by device_id; +-----------+-----------------+ | device_id | number of ports | +-----------+-----------------+ | 45 | 4153 | | 66 | 4153 | | 67 | 4153 | | 68 | 4153 | | 69 | 4153 | | 70 | 1569 | | 71 | 4153 | | 72 | 4153 | | 73 | 4153 | +-----------+-----------------+ 9 rows in set (0.01 sec) mysql> These devices were probably F10/Dell M1000e cards, which I removed from observium because of the large number of l2vlan interfaces on each was causing a processor burden when polled. Rather than fight with them, I just removed them. My question is this, how can I clean up the remnants? Can I just delete these orphaned ports from the table? Or will I break anything if I do that? Thanks This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. Please note that any views or opinions present in this email are solely those of the author and do not necessarily represent those of the company. Finally the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. (Proprietary & Confidential - Artisan Infrastructure, Inc. et all.)

2 2

DRBD Stats / Agent
by Robert Williams 09 Oct '15

09 Oct '15

Hi, Is anyone successfully using the agent to retrieve DRBD statistics? We may be suffering from http://jira.observium.org/browse/OBSERVIUM-574 - I'm not 100%, but I wondered if anyone had fixed it or found a workaround and simply hadn't shared their findings on Jira? Cheers all! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

2 2

Multiple OSPF processes
by Miguel Berniz 09 Oct '15

09 Oct '15

Hello, I have noticed only 1 OSPF process is detected on cisco devices. I have a Catalyst 4500 with 3 processes but only one of them is handle by observium. Is this the normal behavior or does it require special config or not supported at all? Thanks in advance, Miguel

2 1

Update http://www.observium.org/docs/add_device/ for missing "search" line with resolv.conf
by Przemysław S. Knycz 08 Oct '15

08 Oct '15

Hello! I've wird problem with "Can't resolve ...." when adding device (from ./add_device.php and from website). Te solution was simple - there was missing "search domain" at /etc/resolv.conf - i don't find this kind of problem and solution, so you can add it at site to Troubleshooting. Thanks. Regards. -- . Przemyslaw Stanislaw Knycz, +48 601391681 . | WiFi&fiber engineer, xmpp:djrzulf@gmail.com | ` Futurama: You can't prove it won't happen '

1 0

Professional Edition
by Jorge Riveiro Fernandez 06 Oct '15

06 Oct '15

Dear Team, ¿Is possible to make Professional Edition payment via bank transfer or something alternative to credit card or Paypal? BR Jorge Riveiro Fernández Votorantim Cimentos Europe, Africa & Asia IT - Telecoms Area Corporate Center Vigo jorge.riveiro(a)vcimentos.com<mailto:jorge.riveiro@vcimentos.com>

1 0

rsyslog omprog integration Problem
by Serge Müller 05 Oct '15

05 Oct '15

Hi, i'm running observium (latst svn) on a ubuntu 14.04 System. Have Setup rsyslog for udp listening, deployed /etc/rsyslog.d/30-observium.conf as stated in http://www.observium.org/docs/syslog/ However my observium.syslog table stays empty. I have enabled debugging and syslog debuging in config.php so everytime i send a string to /opt/observium/syslog.php the string appears in my observium debug logs. I have started rsyslog in debug mode and (from what rsyslog says) it executes syslog.php: 9163.747286922:7f66a9681700: scriptExec: batch of 1 elements, active (nil), active[0]:1 9163.747293145:7f66a9681700: PROPFILT 9163.747311025:7f66a9681700: Property.: 'inputname' 9163.747324703:7f66a9681700: Operation: 'isequal' 9163.747344027:7f66a9681700: Value....: 'imudp' 9163.747359865:7f66a9681700: Filter: check for property 'inputname' (value 'imudp') isequal 'imudp': TRUE 9163.747370811:7f66a9681700: batch: item 0 PROPFILT 1 9163.747376767:7f66a9681700: scriptExec: batch of 1 elements, active 0x7f66980008e0, active[0]:1 9163.747382283:7f66a9681700: ACTION 0x1fb4d40 [omprog::omprog:;observium] 9163.747404416:7f66a9681700: RRRR: execAct [omprog]: batch of 1 elements, active 0x7f66980008e0 9163.747411147:7f66a9681700: Called action(NotAllMark), processing batch[0] via 'omprog' 9163.747416542:7f66a9681700: Called action(Batch), logging to omprog 9163.747428741:7f66a9681700: submitBatch: enter, nElem 1 9163.747437691:7f66a9681700: tryDoAction 0x1fb4d40, pnElem 1, nElem 1 9163.747443729:7f66a9681700: Action 0x1fb4d40 transitioned to state: itx 9163.747449524:7f66a9681700: entering actionCalldoAction(), state: itx 9163.747471965:7f66a9681700: executing program '/opt/observium/syslog.php' 9163.747917480:7f66a9681700: child has pid 27457 9163.747944939:7f66a9681700: Action 0x1fb4d40 transitioned to state: rdy 9163.747956857:7f66a9681700: action 0x1fb4d40 call returned 0 9163.747978533:7f66a9681700: scriptExec: batch of 1 elements, active 0x7f66980008e0, active[0]:1 9163.748003042:7f66a9681700: STOP and it even returns 0 ! anyone ever stumbled upon such a problem? i put in an additional line in 30-observium.conf :inputname, isequal, "imudp" /var/log/remote/debug.log;observium and it logs my messages just fine any ideas would be highly appreciated best regards Serge

1 0

Custom contacts
by Tim Vaughan 02 Oct '15

02 Oct '15

Hi, is it possible to write my own methods for alert contacts? I'd like to add other services, similar to Pushover, which use a JSON API. Is there any documentation I can use to get started? -- Mobile: 07868246225 Skype: tvaughan Twitter: twitter.com/tvaughan

1 0

$config['snmp']['max-rep'] working?
by Tim Cooper 02 Oct '15

02 Oct '15

Hi Chaps, I'm trying to use $config['snmp']['max-rep] = 9 to work around an issue with a device that won't return everything from ifAlias when using the default (10), however checking the discovery debug it doesn't actually seem to actually be setting the -Cr option in snmpbulkwalk? Am I missing something else to make this work, or is it actually just not working due to its 'experimental' state in the documentation? Running 0.15.10.7059 Thanks, Tim C

3 8

licens renewal
by Casper Allerslev Jensen 02 Oct '15

02 Oct '15

does the licens auto renew or would i need to go in and renew automaticly every year?

1 0

I keep getting mysql errors..
by Casper Allerslev Jensen 01 Oct '15

01 Oct '15

MySQLi connection error 2002: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) Call to function mysqli_error() without link identifier. MySQL Error: any ideas to solve this?

3 2

Re: [Observium] Fwd: NTP Graphs
by Federico Olivieri 01 Oct '15

01 Oct '15

Finally, I managed to have the APP tab, however 2 problems still persist: 1. The NTP Graphs and PDNS the show nothing, just error graph not drawing 2. Under device setting - application I disabled the ntp and pdns application and then they disappeared and I have the message No applications found on this device. however they still are in the folder root@banana:/usr/lib/observium_agent/local# ls -l total 8 -rwxr-xr-x 1 root root 3211 Oct 1 12:00 ntpd -rwxr-xr-x 1 root root 3211 Oct 1 12:00 powerdns-recursor What's wrong with my observium??? :( Thank You Federico 2015-10-01 8:33 GMT+01:00 Federico Olivieri <lvrfrc87(a)gmail.com>: > Hi Adam, > > I tried to re-install Unix Agent from scratch and I still have a problem. > I double cheked the permission and all files belong to root:root with chmod > +x. I don't know what is wrong but I'm quite sure it is something of > stupid! I' m so sad because I have seen that unix agent support power-dns > recursor that is the DNS server that is running on my machine and the > graphs they will be very useful! > I was wondering if you would have just 5 minutes for loggin into my server > and have a quick look. > > I would be very glad > > Thank you for your time so far > > Federico > > 2015-10-01 0:13 GMT+01:00 Adam Armstrong <adama(a)memetic.org>: > >> There is literally nothing to break, this is what the script does : >> >> export AGENT_LIBDIR="/usr/lib/observium_agent" >> >> LOCALDIR=$AGENT_LIBDIR/local >> >> if cd $LOCALDIR >> then >> for skript in $(ls|grep -v '~$') >> do >> if [ -x "$skript" ] ; then >> ./$skript >> fi >> done >> fi >> >> If that doesn't work, the only thing it could realistically possibly be >> is permissions related. >> >> adam. >> >> On 01/10/2015 00:01:34, Federico Olivieri <lvrfrc87(a)gmail.com> wrote: >> Hi, >> >> the packages dpkg rpm were there when I copied the scripts from >> scripts/agent-local >> In regards to user and chmod, I was trying different combination. The >> original script are in this user and group >> >> -rwxrwxr-x 1 banana banana 3211 Mar 26 2014 ntpd >> >> I changed in root root because it didn't work... >> >> >> 2015-09-30 23:55 GMT+01:00 Adam Armstrong <adama(a)memetic.org>: >> >>> Is there any reason that you have dpkg *and* rpm? >>> >>> How come the ntpd script has a different user and us chmod 777? >>> >>> It's possible that there's a permissions issue preventing the scripts >>> from being run. I've never encountered a situation where the >>> observium_agent script failed to execute scripts in the correct directory, >>> so I have no idea why it wouldn't be working. >>> >>> adam. >>> >>> On 30/09/2015 23:50:56, Federico Olivieri <lvrfrc87(a)gmail.com> wrote: >>> It is strange because I have applications under the folder >>> >>> root@banana:/usr/lib/observium_agent/local# ls -l >>> total 104 >>> -rwxrwxr-x 1 root root 2910 Mar 3 2014 apache >>> -rwxrwxr-x 1 root root 880 Mar 3 2014 dmi >>> -rwxrwxr-x 1 root root 714 Mar 3 2014 dpkg >>> -rwxrwxr-x 1 root root 342 Mar 3 2014 memcached >>> -rwxrwxr-x 1 root root 324 Mar 3 2014 munin >>> drwxrwxr-x 2 root root 4096 Mar 3 2014 munin-scripts >>> -rwxrwxr-x 1 root root 51582 Nov 4 2014 mysql >>> -rw-rw-r-- 1 root root 747 Mar 3 2014 mysql.cnf >>> -rwxrwxrwx 1 banana banana 3211 Mar 26 2014 ntpd >>> -rwxrwxr-x 1 root root 115 Mar 3 2014 powerdns >>> -rwxrwxr-x 1 root root 120 Mar 3 2014 powerdns-recursor >>> -rw-rw-r-- 1 root root 228 Mar 3 2014 README >>> -rwxrwxr-x 1 root root 577 Mar 3 2014 rpm >>> -rwxrwxr-x 1 root root 116 Mar 3 2014 temperature >>> >>> I'm quite sure that I m missing something of stupid >>> >>> 2015-09-30 23:38 GMT+01:00 Adam Armstrong <adama(a)memetic.org>: >>> >>>> Hi, >>>> >>>> There don't seem to be any application scripts correctly installed, so >>>> it isn't returning any data that will be used by an app pollers. >>>> >>>> i.e. : >>>> >>>> root@omega:/home/observium/dev# ls /usr/lib/observium_agent/local/ -l >>>> -rwxr-xr-x 1 root root 2910 May 15 2014 apache >>>> -rwxr-xr-x 1 root root 4234 May 15 2014 bind >>>> -rwxr-xr-x 1 root root 714 May 15 2014 dpkg >>>> -rwxr-xr-x 1 root root 102 May 15 2014 lmsensors >>>> >>>> >>>> adam. >>>> >>>> On 30/09/2015 23:18:16, Federico Olivieri <lvrfrc87(a)gmail.com> wrote: >>>> Debug output in attached, I had a look but no idea what the mean. Thank >>>> you!!!! >>>> >>>> 2015-09-30 23:00 GMT+01:00 Adam Armstrong <adama(a)memetic.org>: >>>> >>>>> You can run the poller in debug mode to see what, if anything, it >>>>> tries to do with the data : >>>>> >>>>> ./poller.php -h <device_id> -d >>>>> >>>>> adam. >>>>> >>>>> On 30/09/2015 22:58:51, Federico Olivieri <lvrfrc87(a)gmail.com> wrote: >>>>> Ok, >>>>> Telnet seems to work (see attachment), however, under application tab >>>>> I can read No applications found on this device. >>>>> >>>>> (By the way...thank you for your time!) >>>>> >>>>> 2015-09-30 22:30 GMT+01:00 Adam Armstrong <adama(a)observium.org>: >>>>> >>>>>> If it's set up correctly, you should get an "apps" menu populated >>>>>> with applications which are correctly returned. >>>>>> >>>>>> You can test the agent is returning data by telnetting to the agent >>>>>> port. >>>>>> >>>>>> adam. >>>>>> >>>>>> On 30/09/2015 22:17:59, Federico Olivieri <lvrfrc87(a)gmail.com> wrote: >>>>>> Ok guys. >>>>>> I managed to set-up the UNIX agent. It is running on the same machine >>>>>> that is acting as OBSERVIUM server (basically it is pooling itself on >>>>>> loopback interface). I copied the scripts >>>>>> into /usr/lib/observium_agent/local/ and they are executable. On observium >>>>>> web page I can see the agent execution time, however...no one graph related >>>>>> to the scripts copied is shown by observium. >>>>>> >>>>>> Below my php conf >>>>>> >>>>>> Any suggestion? >>>>>> >>>>>> >>>>>> ## Check http://www.observium.org/wiki/Configuration_Options for >>>>>> documentation $ >>>>>> >>>>>> // Database config --- This MUST be configured >>>>>> $config['db_host'] = 'localhost'; >>>>>> $config['db_user'] = 'root'; >>>>>> $config['db_pass'] = 'xxxxxx'; >>>>>> $config['db_name'] = 'observium'; >>>>>> >>>>>> // Base directory >>>>>> $config['install_dir'] = "/opt/observium"; >>>>>> >>>>>> // Default community list to use when adding/discovering >>>>>> $config['snmp']['community'] = array("public"); >>>>>> >>>>>> // Authentication Model >>>>>> $config['auth_mechanism'] = "mysql"; // default, other options: >>>>>> ldap, http-a$ >>>>>> >>>>>> // Enable alerter (not available in CE) >>>>>> #$config['poller-wrapper']['alerter'] = TRUE; >>>>>> >>>>>> // Set up a default alerter (email to a single address) >>>>>> $config['alerts']['alerter']['default']['descr'] = "Default Email >>>>>> Alert"; >>>>>> $config['alerts']['alerter']['default']['type'] = "email"; >>>>>> $config['alerts']['alerter']['default']['contact'] = " >>>>>> lvrfrc87(a)gmail.com"; >>>>>> $config['alerts']['alerter']['default']['enable'] = TRUE; >>>>>> >>>>>> // UNIX agent >>>>>> $config['poller_modules']['unix-agent'] = 1; >>>>>> >>>>>> // End config.php >>>>>> >>>>>> >>>>>> 2015-09-29 10:08 GMT+01:00 Federico Olivieri <lvrfrc87(a)gmail.com>: >>>>>> >>>>>>> Ok, >>>>>>> Thank for the info. I'll have a look >>>>>>> >>>>>>> Federico >>>>>>> >>>>>>> 2015-09-29 10:01 GMT+01:00 Adam Armstrong <adama(a)observium.org>: >>>>>>> >>>>>>>> To get NTP data to observium you need to be running the observium >>>>>>>> Unix agent on the device. >>>>>>>> >>>>>>>> This is required for both the native NTP graphing and graphing of >>>>>>>> things via munin. >>>>>>>> >>>>>>>> There is documentation for the Unix agent on the website. >>>>>>>> >>>>>>>> Adam. >>>>>>>> >>>>>>>> Sent with AquaMail for Android >>>>>>>> http://www.aqua-mail.com >>>>>>>> >>>>>>>> On 29 September 2015 12:56:55 Federico Olivieri <lvrfrc87(a)gmail.com> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Hi guys, >>>>>>>>> >>>>>>>>> Thanks for your reply. >>>>>>>>> Actually, I'm using Linux version* 3.2.0-4-amd64 >>>>>>>>> (debian-kernel(a)lists.debian.org <debian-kernel(a)lists.debian.org>) (gcc >>>>>>>>> version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.68-1+deb7u3* and >>>>>>>>> I running ntpd but the graphs are not displayed >>>>>>>>> >>>>>>>>> If I decide to run munin client on my server (I guess munin-node >>>>>>>>> packet) how can I integrate it on OBSERVIUM? >>>>>>>>> >>>>>>>>> Thanks >>>>>>>>> >>>>>>>>> Federico >>>>>>>>> >>>>>>>>> >>>>>>>>> 2015-09-28 22:03 GMT+01:00 Adam Armstrong <adama(a)observium.org>: >>>>>>>>> >>>>>>>>>> Alternatively, Observium can collect and display data from a >>>>>>>>>> munin client via the Unix agent, too. >>>>>>>>>> >>>>>>>>>> Adam. >>>>>>>>>> >>>>>>>>>> Sent with AquaMail for Android >>>>>>>>>> http://www.aqua-mail.com >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On 29 September 2015 12:43:08 am Michael <observium(a)smarsz.com> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>> If you use the unix agent (check_mk) it will detect ntpd >>>>>>>>>>> automatically and add graphing for it. Couldn't be easier. >>>>>>>>>>> >>>>>>>>>>> Assuming you are running ntpd on a unix variant. If it's an >>>>>>>>>>> appliance (trimble etc), then it might need some extra work to fetch via >>>>>>>>>>> snmp. >>>>>>>>>>> >>>>>>>>>>> Michael >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On 29 September 2015 6:37:14 AM AEST, Federico Olivieri < >>>>>>>>>>> lvrfrc87(a)gmail.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> Hi All, >>>>>>>>>>>> >>>>>>>>>>>> I'm trying to plot some graphs with Observium for my NTP >>>>>>>>>>>> server. I >>>>>>>>>>>> would do >>>>>>>>>>>> something similar to MUNIN. I tried to google it but I didn't >>>>>>>>>>>> find any >>>>>>>>>>>> useful information for my (low) level of experience. >>>>>>>>>>>> >>>>>>>>>>>> Can someone point me in the right direction? >>>>>>>>>>>> >>>>>>>>>>>> Thank You >>>>>>>>>>>> >>>>>>>>>>>> Federico >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>> >>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> observium mailing list >>>>>>>>>>>> observium(a)observium.org >>>>>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> observium mailing list >>>>>>>>>>> observium(a)observium.org >>>>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> observium mailing list >>>>>>>>>> observium(a)observium.org >>>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>>>> >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> observium mailing list >>>>>>>>> observium(a)observium.org >>>>>>>>> >>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>>> <http://postman.memetic.org/cgi-bin/mailman/listinfo/observium> >>>>>>>>> >>>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> observium mailing list >>>>>>>> observium(a)observium.org >>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>> >>>>>>>> >>>>>>> >>>>>> _______________________________________________ observium mailing >>>>>> list observium(a)observium.org >>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> observium mailing list >>>>>> observium(a)observium.org >>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>> >>>>>> >>>>> _______________________________________________ observium mailing list >>>>> observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>> >>>>> >>>>> _______________________________________________ >>>>> observium mailing list >>>>> observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>> >>>>> >>>> _______________________________________________ observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> >>>> >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> >>>> >>> _______________________________________________ observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> >> _______________________________________________ observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >

5 9

svn update problem
by Zach Underwood 01 Oct '15

01 Oct '15

As anyone else see this [root@observium2 observium]# svn update svn: E155036: Please see the 'svn upgrade' command svn: E155036: Working copy '/opt/observium' is too old (format 10, created by Subversion 1.6) observium version 0.15.9.7054 svn version 1.7.4 CentOS release 6.7 -- Zach Underwood (RHCE,RHCSA,RHCT,UACA) greenvilletowers.com My website <http://zachunderwood.me>

3 2

im seeing device down but they are not
by Casper Allerslev Jensen 01 Oct '15

01 Oct '15

over the last few days i have starting seen alert mails with device down.. but its not down.. and there is no recover.. anyone got a suggestion why that could be? I mean it could be a short connection problem but than i would assume to see recover mail aswell?

6 14