- observium - lists.observium.org

help creating alerts
by Casper Allerslev Jensen 26 Aug '15

26 Aug '15

Hi all.. im trying understand how to make different alerts in Observium.. for testing im trying to creat a alert that will hit all device and set the flag if diskspace becomes 90% used. For that i used the storage_perc alert and created the alert like this: Check condition: storage_perc gt 90 Associations device match: os match * Associations Entity match: storage_perc match * Now the example i found in the documentation was here: http://observium.org/docs/alert_checker/ and was for mempool_perc. Now i know my storage exampel doesn't use the same entity match but thats because i don't understand what that is? My logics behind my alert is like this. Check condition see if storage usages reach 90% or more. Association device is to set what devices in observium should be hit by this alert. I set mine to os match wildcard beacuse i want all device to be hit by this alert. Association Entity im not sure i fully understand? Any help would be apriciated... and please .. i rather be taught to fish then be given a fish :) if you know what i mean :)

2 5

Empty Chart
by Michael Ponto 26 Aug '15

26 Aug '15

I know I missed something but not sure what. Just did a fresh install of Observium on Ubuntu 14 LS and everything except the charts are working. All devices are reporting processor info, temp, errors, ect. It is just that the charts are empty. Anyone have any suggestions as to where to start looking?

2 4

sending eventlog by email
by Ross [Eve IT] 26 Aug '15

26 Aug '15

Hello, I'm sure this is quite simple, but how do I send the alerts listed in the eventlog straight to email as they are listed. https://<observium-server>/eventlog/ So as they come through, they are send immediately to an email address. Thanks ! Ross.

2 3

Device listing Group vs. Device list
by chott＠praha1.net 24 Aug '15

24 Aug '15

Hello team there is little difference between List in Group and List in Device list like version is nex to device in Device list is under screen attached Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

1 0

Ability export RANCID Config
by chott＠praha1.net 24 Aug '15

24 Aug '15

Hello team, you are planning Export RANCID Config from web GUI to TXT file? Same like export XML data ? Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 2

Re: [Observium] "Monitoring" Linux Softraid State?
by Richard Müller 24 Aug '15

24 Aug '15

Hy Adam, In real live it looks like this if everything is "good": <<<md>>> Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md1 : active raid1 sdb2[1] sda2[0] 59559808 blocks super 1.2 [2/2] [UU] md0 : active raid1 sdb1[1] sda1[0] 1950656 blocks super 1.2 [2/2] [UU] unused devices: <none> Criterions for Yellow Alarm (my opinion): One or more "U" is replaced with "_" or "recovery" is found Criterion for Red Alarm (my opinion): Device is marked as inactive and has "_"s Look at: https://raid.wiki.kernel.org/index.php/Mdstat Thanks Richard -- Richard Müller | Geschäftsführer teamix GmbH Südwestpark 43 90449 Nürnberg Tel.: +49 911 30999 0 | Fax: +49 911 30999 99 mail: rm(a)teamix.de | web: http://www.teamix.de | blog: http://blog.teamix.de Amtsgericht Nürnberg, HRB 18320 | Geschäftsführer: Oliver Kügow, Richard Müller ***Save the Date: Besuchen Sie uns auf der it-sa Messe in Nürnberg vom 06.10.15 – 08.10.15 auf Stand 12-205*** -----Ursprüngliche Nachricht----- Message: 1 Date: Sun, 23 Aug 2015 12:26:07 +0100 From: "Adam Armstrong" <adama(a)memetic.org> To: "" <observium(a)observium.org> Subject: Re: [Observium] "Monitoring" Linux Softraid State? Message-ID: <ea384ce9-cb37-4664-83e1-95356caeab5e(a)getmailbird.com> Content-Type: text/plain; charset="utf-8" Is all of the required information returned in the md section? It'd probably just take a bit of code to parse the output and inject the required entries into the status system. adam. On 23/08/2015 10:31:37, Richard M?ller <rm(a)teamix.de> wrote: Hy *, ? I just noticed that observium_agent returns a <<<md>>> section: ? 1.)??? Question: is there actual a way of monitoring the state of linux softraid devices in Observium, I just do not know? Documentation / google is quite silent about this question. :-) 2.)??? If no, how can this be implemented? Idea #1: Introduce a ?(red|yellow) Alarm? state even for Unix devices, as most common network devices have. So this technique can be also used for different kinds of alarms (Raid, Network, ECC, ?) a.?????? Yellow Alarm: Raid degraded b.????? Red Alarm: Raid broken :-) ? Idea #2: Is this something, which can be implemented ?outside Observium? (e.g. by some ?geniuos? snmpd-configuration lines in snmpd.conf) and Observium just uses the normal ?(yellow|red) Alarm? way, which is already implemented? Sorry, I am not an SNMP-Expert, so I cannot answer this for myself. ? Thanks Richard --

1 0

alternative to svn update
by Samarasinghe, Sujith 24 Aug '15

24 Aug '15

Hi , I was trying to update to latest version but our firewall does not allow svn as protocol. I downloaded the latest stable version using wget instead and tried to locate new folder under /opt/. I got permission denied error on /discovery.php -u Is there a better way to upgrade than this risky method if SVN is not an option? Thanks, Sujith. Confidentiality Note: This e-mail and any attachments are confidential and may be protected by legal privilege. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation.

1 0

"Monitoring" Linux Softraid State?
by Richard Müller 23 Aug '15

23 Aug '15

Hy *, I just noticed that observium_agent returns a <<<md>>> section: 1.) Question: is there actual a way of monitoring the state of linux softraid devices in Observium, I just do not know? Documentation / google is quite silent about this question. :-) 2.) If no, how can this be implemented? Idea #1: Introduce a “(red|yellow) Alarm” state even for Unix devices, as most common network devices have. So this technique can be also used for different kinds of alarms (Raid, Network, ECC, …) a. Yellow Alarm: Raid degraded b. Red Alarm: Raid broken :-) Idea #2: Is this something, which can be implemented “outside Observium” (e.g. by some “geniuos” snmpd-configuration lines in snmpd.conf) and Observium just uses the normal “(yellow|red) Alarm” way, which is already implemented? Sorry, I am not an SNMP-Expert, so I cannot answer this for myself. Thanks Richard -- <http://www.teamix.de>[teamix]<http://www.teamix.de> Richard Müller Geschäftsführer teamix GmbH Südwestpark 43 90449 Nürnberg Tel.: +49 911 30999 0 Fax: +49 911 30999 99 mail: rm(a)teamix.de web: http://www.teamix.de blog: http://blog.teamix.de Amtsgericht Nürnberg, HRB 18320 | Geschäftsführer: Oliver Kügow, Richard Müller ***Save the Date: Besuchen Sie uns auf der it-sa Messe in Nürnberg vom 06.10.15 – 08.10.15 auf Stand 12-205***

2 1

Ability to Zoom on Graphs?
by Rudolf Hoehler 22 Aug '15

22 Aug '15

Hello Observium team, I would like to know how much effort would it be to add the ability to drag a timeline across a graph which will then automatically adjust the date/time range to that section of the graph? Regards, Rudolf

1 0

DB update error
by Sholom Shapiro 21 Aug '15

21 Aug '15

Hi, I just updated for the first time in a couple of weeks, and got an error applying the updates. Here is the console message and update-errors log: /opt/observium# php ./discovery.php -h none ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 0.15.8.6911 http://www.observium.org -- Updating database/file schema 219 -> 220 ... (db) done. 220 -> 221 ... (db) done. 221 -> 222 ... (db) done. 222 -> 223 ... (db) done. 223 -> 224 ... (db) done (2 errors). 224 -> 225 ... (db) done. 225 -> 226 ... (db) done. 226 -> 227 ... (db) done. 227 -> 228 ... (db) done. -- Done. [2015/08/21 09:48:29 -0700] discovery.php(12283): ====== Schema update 223 -> 224 ============== [2015/08/21 09:48:29 -0700] discovery.php(12283): Query: ALTER TABLE `alert_table-state` ADD `last_ok` INT NULL AFTER `last_recovered` ; [2015/08/21 09:48:29 -0700] discovery.php(12283): Error: (1114) The table '#sql-42b4_3c28dc' is full [2015/08/21 09:48:29 -0700] discovery.php(12283): Query: ALTER TABLE `alert_table-state` CHANGE `last_checked` `last_checked` INT( 10 ) NULL DEFAULT NULL , CHANGE `last_changed` `last_changed` INT( 10 ) NULL DEFAULT NULL , CHANGE `last_recovered` `last_recovered` INT( 10 ) NULL DEFAULT NULL , CHANGE `last_ok` `last_ok` INT( 10 ) NULL DEFAULT NULL , CHANGE `last_failed` `last_failed` INT( 10 ) NULL DEFAULT NULL ; [2015/08/21 09:48:29 -0700] discovery.php(12283): Error: (1054) Unknown column 'last_ok' in 'alert_table-state' Thank You Sholom Shapiro | Senior Systems Engineer Viking Technology Partners sholom(a)vikingtech.consulting 310.948.2438 Viking Technology Partners 10501 W. Gowan Road, Suite 170 Las Vegas, Nevada 89129 vikingtech.consulting <http://www.vikingtech.consulting> @vikingtechs <https://twitter.com/VikingTechs>

2 3

Re: [Observium] Link to device - Feature request
by Tom Laermans 21 Aug '15

21 Aug '15

I've actually come accross quite a few devices that specify configured telnet and http ports and the like in their snmp tree, we could definitely make use of those. So whoever decides to code this up (i'm on vacation this week) please leave room for custom ports in the database ;) Tom On Aug 11, 2015 2:15 PM, Jason Lixfeld <jason(a)lixfeld.ca> wrote: > > You know, I'm actually disgusted with myself for doing that. One of my biggest pet peeves is txt shorthand, in any sort of correspondence. It's lazy and insulting. Yet I just did it myself. > > Sorry Observium. I still love you :) > > Sent from my iPhone > > On Aug 11, 2015, at 8:02 AM, Adam Armstrong <adama(a)memetic.org> wrote: > >> Also, I think we might officially rename Observium to O, since its much easier to type :D >> >> Adam. >> >> Sent with AquaMail for Android >> http://www.aqua-mail.com >> >> On 11 August 2015 12:33:41 pm Jason Lixfeld <jason(a)lixfeld.ca> wrote: >>> >>> I agree, less is more, but how would O determine what to use on devices that were routers or switches or something that had WebUI and/or telnet and/or ssh CLI, where either one was user configurable? >>> >>> Perhaps a configurable default; an array that you could specify OS' and/or host names? Ya, fuck me too. That's getting complicated :) >>> >>> I guess as long as there is room for it in the database, it'd be trivial to run a post-discovery script to add whatever URL was appropriate if you wanted to overwrite whatever O thought was an acceptable default. >>> >>> /finding my rock again... :) >>> >>> Sent from my iPhone >>> >>> On Aug 11, 2015, at 7:11 AM, Adam Armstrong <adama(a)memetic.org> wrote: >>> >>>> I'd prefer if they were only shown on devices wo which they applied, so I think I'd make them an OS type attribute, so you'd only show rdp on windows, etc. >>>> >>>> Adam. >>>> >>>> Sent with AquaMail for Android >>>> http://www.aqua-mail.com >>>> >>>> On 11 August 2015 12:04:37 pm Attila Nagy <tylla_at_memetic.org(a)tylla.hu> wrote: >>>>> >>>>> The solution below is a really constrained (only on Windows, only IE, only with putty and only putty put on the root of the C: drive). >>>>> >>>>> I would think a simple ssh://host.domain.name link would suffice. >>>>> >>>>> And if possible rdp:// http:// vnc:// and maybe smb:// links should accompany the ssh entry. >>>>> >>>>> And the drop down menu would be perfect, it shouldn't take too much space, but be available. >>>>> >>>>> On 2015-08-11 12:49, chott(a)praha1.net wrote: >>>>>> >>>>>> Some idea from my colleague >>>>>> >>>>>> >>>>>> <html> >>>>>> <head> >>>>>> <script type="text/javascript"> >>>>>> function runProgram() >>>>>> { >>>>>> var shell = new ActiveXObject("WScript.Shell"); >>>>>> shell.Run("\"C:\\putty.exe\" 176.101.147.218"); >>>>>> } >>>>>> </script> >>>>>> </head> >>>>>> >>>>>> <body> >>>>>> <a href="javascript:runProgram()">Run program</a> >>>>>> </body> >>>>>> </html> >>>>>> >>>>>> >>>>>> >>>>>> Tomas Chott >>>>>> technický ředitel >>>>>> >>>>>> chott(a)praha1.net >>>>>> Phone: +420 245 004 005 >>>>>> Mobile: +420 604 930 119 >>>>>> >>>>>> Metropolitní síť Praha 1 z.s.p.o. >>>>>> Jindrisska 18 >>>>>> 110 00 Praha 1 >>>>>> Czech Republic >>>>>> www.praha1.net >>>>>> >>>>>> ________________________________ >>>>>> Od: observium [observium-bounces(a)observium.org] za uživatele chott(a)praha1.net [chott(a)praha1.net] >>>>>> Odesláno: 11. srpna 2015 12:43 >>>>>> Komu: Observium Network Observation System >>>>>> Předmět: Re: [Observium] Link to device - Feature request >>>>>> >>>>>> Yes :-) >>>>>> >>>>>> now we are using Observium for inventory and now i must find specific switch in Observium, copy link or opne NEw Tab and get Config. >>>>>> >>>>>> What about space nex to RAW DATA >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> Tomas Chott >>>>>> technický ředitel >>>>>> >>>>>> chott(a)praha1.net >>>>>> Phone: +420 245 004 005 >>>>>> Mobile: +420 604 930 119 >>>>>> >>>>>> Metropolitní síť Praha 1 z.s.p.o. >>>>>> Jindrisska 18 >>>>>> 110 00 Praha 1 >>>>>> Czech Republic >>>>>> www.praha1.net >>>>>> >>>>>> ________________________________ >>>>>> Od: observium [observium-bounces(a)observium.org] za uživatele Jason Lixfeld [jason(a)lixfeld.ca] >>>>>> Odesláno: 11. srpna 2015 12:39 >>>>>> Komu: Observium Network Observation System >>>>>> Předmět: Re: [Observium] Link to device - Feature request >>>>>> >>>>>> Perfect timing. I was just recently thinking about how convenient it would be to be able to do one-click to connect to a device. >>>>>> >>>>>> :) >>>>>> >>>>>> Sent from my iPhone >>>>>> >>>>>> On Aug 11, 2015, at 6:25 AM, Adam Armstrong <adama(a)memetic.org> wrote: >>>>>> >>>>>>> We have limited space on the device navbar, but we could perhaps put these in a drop-down menu from an icon >>>>>>> >>>>>>>> On 11/08/2015 11:23:47, chott(a)praha1.net <chott(a)praha1.net> wrote: >>>>>>>> >>>>>>>> Hello team, >>>>>>>> >>>>>>>> i have question about create link in observium for open in new tab GUI of device config >>>>>>>> >>>>>>>> for example if iam in Device Overview, create some Icon or Text link to open New Tab for Device GUI configuration HTTP? Or SSH plugin https://addons.mozilla.org/EN-us/firefox/addon/firessh/ >>>>>>>> >>>>>>>> Tom >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Tomas Chott >>>>>>>> technický ředitel >>>>>>>> >>>>>>>> chott(a)praha1.net >>>>>>>> Phone: +420 245 004 005 >>>>>>>> Mobile: +420 604 930 119 >>>>>>>> >>>>>>>> Metropolitní síť Praha 1 z.s.p.o. >>>>>>>> Jindrisska 18 >>>>>>>> 110 00 Praha 1 >>>>>>>> Czech Republic >>>>>>>> www.praha1.net >>>>>>> >>>>>>> _______________________________________________ >>>>>>> observium mailing list >>>>>>> observium(a)observium.org >>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> >>>>>> observium mailing list >>>>>> >>>>>> observium(a)observium.org >>>>>> >>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>> >>>>> >>>>> _______________________________________________ >>>>> observium mailing list >>>>> observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>> >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 4

Sorting by OS
by chott＠praha1.net 21 Aug '15

21 Aug '15

Hello team today i can make list of my Mikrotik device and sort by Version and prepare upgrade but GUI doesnt sort :-) or i means if i set A-Z by OS, observim list device from Oldest to newest,,, Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 3

Wireless Support Cisco WLC
by Basile Bluntschli 21 Aug '15

21 Aug '15

Hi Team a few ages ago there was a poll from Adam about which Wireless System should be supported. Since then I have not seen any progress on Cisco WLC. Is there anything in the works? Would SNMP access help? Thanks Basile

6 8

Show suppressed alerts only
by Andre Geißler 21 Aug '15

21 Aug '15

Hi In Alert Overview it is possible to select Failed Only. Could you add a Supressed Only too? Regards, Andre

2 2

Alert Contact and Observium User Management
by chott＠praha1.net 21 Aug '15

21 Aug '15

Hello team, are you plaining connection Alert to Observium User Management people? My idea is in attached screen lot of people which has access to Observium we can pair with some Alert, now we creating duplicate Contacts Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 2

Billing bi-directional
by Chen Reshef 20 Aug '15

20 Aug '15

Hi, I'm checking the billing module now, and I wondered. Can I configure different commit value for each direction ? (outbound/inbound) Thanks, Chen --------------------------------------------------------------------------------------------------------------- This e-mail message may contain confidential, commercial and privileged information or data that constitute proprietary information of Cellcom Israel Ltd. Any review or distribution by others is strictly prohibited. If you are not the intended recipient you are hereby notified that any use of this information or data by any other person is absolutely prohibited. If you are not the intended recipient, please delete all copies. Thank You. http://www.cellcom.co.il

2 2

Reset interface counters
by David Hulth 20 Aug '15

20 Aug '15

Hi, If I reset the port-counters in a switch, would that throw off Observium port graphs in any way? Thanks -- David Hulth Lab Technician Procera Networks AB

3 4

VB: I broke my Observium when changing in the config, php file and now nothing works
by Simarpal Rooprai 20 Aug '15

20 Aug '15

Skickat: den 19 augusti 2015 15:20 Till: Observium Network Observation System Ämne: I broke my Observium when changing in the config,php file and now nothing works So as the title reads, my observium which was working 2 hours ago does not any more. I cant seem to find what the problem with the config file is so I need some help. Please note im not a PHP guy but a networking guy. When browsing to the site all that is shown is is the config file in txt form. See in attached files. I think I removed something fron the config frontpage but I cant seem to find what.... Also tried googling but did not find anything regarding this. Can someone please help ? Find the PHP.config attached. Thank you Best regards / Med vänlig hälsning Simarpal Rooprai Technical Service Engineer simarpal.rooprai(a)networkservices.se<mailto:simarpal.rooprai@networkservices.se> mobile +46 (0) 723 73 21 20. NETWORK SERVICES NORDEN AB Fosievägen 13, SE-214 31 Malmö, Sweden. Phone +46 (0)8-410 231 17. www.networkservices.se<http://www.networkservices.se/> "ENABLING EVERYDAY COMMUNICATION" [cid:EAE04F13-BA46-427C-A29B-F1425DF22D4F@ideon.se]

2 2

Definition of Device type
by chott＠praha1.net 20 Aug '15

20 Aug '15

Hi team, what is definition for Device type? For example now i adding NanoBeam and NanoBridge to Observium and Device type is Network, but for me ...NanoBeam is Wirelless Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

4 9

force rediscover vanished
by Simon Smith 20 Aug '15

20 Aug '15

Hi All, I have just noticed, the new options on the Machines page (the settings cog) with sub options, wonderful idea! however the force rediscover of a machine button has vanished !? any idea where its gone? Simon

2 2

Problem alert
by chott＠praha1.net 20 Aug '15

20 Aug '15

Hello everybody, i dont know where i have problem but, i have set Alert for down of One port in switch everytime i receive only RECOVERY email On the web Observium status is ALERT_NOTIFY, but i receive email only when status is RECOVER_NOTIFY This problem i have for Port down, Alert is associated with two Contacts, one is Gmail second is some Domain. Can i check some debug mode? Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

5 16

Hostname - future request
by chott＠praha1.net 19 Aug '15

19 Aug '15

Hello team, is possible add "Hostname" to Overview tab? Like Hardware, OS, Serial and Hostname? for example in Unifi AP we are using Hostname for floor definition etc.... Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 4

get_port_by_index_cache()
by Marco Spicuglia 19 Aug '15

19 Aug '15

Hi there, any ideas about the following error message I got during discovery? "Invalid arguments passed into function get_port_by_index_cache(). Please report to developers." Regards, Marco

2 1

transit ports
by Samarasinghe, Sujith 19 Aug '15

19 Aug '15

Hi, Could anyone can explain how to make the transit links and make a dashboard with transit links utilization that we can pass over to read-only users group? Thanks, Sujith. Confidentiality Note: This e-mail and any attachments are confidential and may be protected by legal privilege. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation.

2 4

Re: [Observium] 'Duplicate entry' issues on vlans_fdb
by Tom Laermans 18 Aug '15

18 Aug '15

If you're running multiple simultaneous pollers against the same device is not unthinkable they'll all be trying to insert the same data into the table... Tom On Aug 12, 2015 8:02 AM, Aaron Mayfield <amayfield(a)artisaninfrastructure.com> wrote: > > Here is the requested output. I had to kill all the other poller processes running on the system to get it to run (they were hosing the CPU). Oddly enough, once I killed all the other processes, I didn’t any problems running it (back to being fast). Also don’t seem to be getting the errors in the db.log when running the poller ‘one-at-a-time’. > > > > > > > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong > Sent: Tuesday, August 11, 2015 11:52 PM > To: observium(a)observium.org > Subject: Re: [Observium] 'Duplicate entry' issues on vlans_fdb > > > > Hi Aaron, > > > > These seem to be gone from my db.log. Could you send me a ./poller.php -h 54 -m fdb-table -d ? > > > > Thanks, > > adam. >> >> On 12/08/2015 05:01:53, Aaron Mayfield <amayfield(a)artisaninfrastructure.com> wrote: >> >> Just today I updated to the latest and greatest (0.15.8.6882). I was several revisions behind and several database updates were done as a result. After the update, I noticed my poller.php processes started taking all the CPU, started getting gaps in the graphs, etc. I noticed thousands of these entries in db.log: >> >> >> [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2083-6ef88537f91f' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2083','220115','6ef88537f91f','learned') >> [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2084-005056a927c2' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2084','220115','005056a927c2','learned') >> [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2084-a66aaf0bf4cc' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2084','220115','a66aaf0bf4cc','learned') >> [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2085-228a3d193c66' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2085','220115','228a3d193c66','learned') >> [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2086-0ee7c729643b' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2086','220115','0ee7c729643b','learned') >> >> If I run a poller process against a switch manually, everything seems to run fine with the exception of the fdb-table module, which is taking over 600 seconds to run. >> >> Here is the schema of my vlans_fdb file: >> >> mysql> show columns from vlans_fdb >> -> ; >> +-------------+-------------+------+-----+---------+-------+ >> | Field | Type | Null | Key | Default | Extra | >> +-------------+-------------+------+-----+---------+-------+ >> | device_id | int(11) | NO | PRI | NULL | | >> | vlan_id | int(11) | NO | PRI | NULL | | >> | port_id | int(11) | YES | MUL | NULL | | >> | mac_address | varchar(32) | NO | PRI | NULL | | >> | fdb_status | varchar(32) | NO | | NULL | | >> +-------------+-------------+------+-----+---------+-------+ >> 5 rows in set (0.00 sec) >> >> mysql> >> mysql> show index from vlans_fdb >> -> ; >> +-----------+------------+--------------+--------------+-------------+-----------+-------------+---- ----+--------+------+------------+---------+ >> | Table | Non_unique | Key_name | Seq_in_index | Column_name | Collation | Cardinality | Sub art | Packed | Null | Index_type | Comment | >> +-----------+------------+--------------+--------------+-------------+-----------+-------------+---- ----+--------+------+------------+---------+ >> | vlans_fdb | 0 | dev_vlan_mac | 1 | device_id | A | 15 | ULL | NULL | | BTREE | | >> | vlans_fdb | 0 | dev_vlan_mac | 2 | vlan_id | A | 18348 | ULL | NULL | | BTREE | | >> | vlans_fdb | 0 | dev_vlan_mac | 3 | mac_address | A | 128440 | ULL | NULL | | BTREE | | >> | vlans_fdb | 1 | device_id | 1 | device_id | A | 78 | ULL | NULL | | BTREE | | >> | vlans_fdb | 1 | port_id | 1 | port_id | A | 431 | ULL | NULL | YES | BTREE | | >> +-----------+------------+--------------+--------------+-------------+-----------+-------------+---- ----+--------+------+------------+---------+ >> 5 rows in set (0.04 sec) >> >> mysql> >> >> Does my table structure look right? I see someone else on the list has had this same issue, but there is no indication that this should be a problem in the latest version. >> >> What should I check? Thanks for any help. >> >> >> >> >> Aaron Mayfield >> Cloud Expert >> Networking Specialist >> >> 12400 Hwy. 71 W. Suite 350-407 >> Austin, TX 78738 >> T. 512.600.4297 >> www.artisaninfrastructure.com >> Partner portal: https://portal.vpdc.us >> Partner support: support(a)artisaninfrastructure.com >> >> >> >> This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. Please note that any views or opinions present in this email are solely those of the author and do not necessarily represent those of the company. Finally the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. (Proprietary & Confidential – Artisan Infrastructure, Inc. et all.) >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. Please note that any views or opinions present in this email are solely those of the author and do not necessarily represent those of the company. Finally the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. (Proprietary & Confidential – Artisan Infrastructure, Inc. et all.)

5 28

SolidFire SSD Storage
by Serghei Golipad 18 Aug '15

18 Aug '15

Guys, Any chance adding support for SolidFire storage? Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. Kelway (UK) Ltd is a Company registered in England and Wales. This email is sent for and on behalf of Kelway Holdings Limited. Kelway Holdings Limited is the UK holding company for Kelway (UK) Limited trading as Kelway. The registered office for Kelway Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than Kelway or the sender of its existence. For more information about Kelway please visit www.kelway.co.uk

1 0

Allerting by port
by chott＠praha1.net 18 Aug '15

18 Aug '15

Hello team, in Cisco IOS switch i have aler for Device match "hostname match sw29" and Entity "ifDescr match FastEthernet4/0/3" I can can set same for Cisco Small business set like this "hostname match lsgsw28" and Entity "ifDescr match gi5" but probably there is another Entity for Cisco Small Business for name of port because Observium after Rebuild Alert does not find Device and port Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 6

Alerts not clearing
by Johnston, Tom 17 Aug '15

17 Aug '15

I’m going to piggy back off the issue of the Alerts not clearing. I’m getting the same issue and I’m pretty sure its SQL config related though I don’t know much past that. For example if I add a new device, I will get alerts for ports in the Admin up / physical down as I’m checking for that with an alert checker. That’s to be expected as I haven’t had a chance to turn off alerting on interfaces I don’t care about yet. Once it polls I turn off polling/alerting on interfaces (such as access ports) So if I go in and turn polling/alerting off on those interfaces I’d assume the alerts would clear. However the alerts persist and keep firing even if I have them turned off on those specific interfaces. I have figured out I can manually clear these alerts by restarting the mysql service. Here is part of the poller run (not sure if you want it all) ##### Completed polling run at 2015-08-17 11:34:51 ##### o Devices Polled 1 o Poller Time 7.877 secs o Memory usage 7.25MB (peak: 7.25MB) o MySQL Usage Cell[3/0.001s] Row[8/0.002s] Rows[52/0.02s] Column[2/0.001s] Update[20/0.014s] Insert[4/0.016s] Delete[0/0s] o RRDTool Usage update[29/0.033s] ——————— Output of my.cnf —————————— I have tweaked some of these in an effort to fix past and this current issue. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp lc-messages-dir = /usr/share/mysql skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 64M #Was 16 max_allowed_packet = 64M #Was 16 thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 32M #Was 1M on 7/2 Tom Changed to test query_cache_size = 32M #Was 16 8/17 # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error log - should be very few entries. # log_error = /var/log/mysql/error.log # # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem tmp_table_size = 2G max_heap_table_size = 2G [mysqldump] quick quote-names max_allowed_packet = 32M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # Tom J On 8/17/15, 9:11 AM, "observium on behalf of observium-request(a)observium.org" <observium-bounces(a)observium.org on behalf of observium-request(a)observium.org> wrote: >Re: Alerts not clearing

2 1

Question Allerting
by chott＠praha1.net 17 Aug '15

17 Aug '15

Hello team we have question from our customer, if i can sending Email with alert for interface down status for specific switch and send to specific email only for one customer for example Cisco sw29, port FastEthernet 4/0/3 i can try set ifOperStatus equal down hostname match sw29 FastEthernet4/0/3 doesnt work Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

3 15

How to add support of new sensors for new (unknow) device
by Denis Zolotarev 17 Aug '15

17 Aug '15

Hello! I am very interested in adding support of new device series to Observium - NetPing (www.netping.ru) - devices for monitoring server rooms and remote power management. Could you please suggest how can I add support of the sensors for unknown (for Observium) devices? I have access to SMNP MIBs of this divices and can read value of any sensors via SNMP. For example I know the OID to read the temperature from one of the sensons: .1.3.6.1.4.1.25728.8800.1.1.2.1 Could you please explain how can I show this temperature on a graph in Observium? Thank you. -- Best Regards, Denis Zolotarev <http://google.com/+DenisZolotarev>

2 2

Hostname in generated graph image
by Simone Montagnani 17 Aug '15

17 Aug '15

Hi all, I've installed latest Observium community from a couple of months and it's working well. I need to use some graphs in other internal websites for monitoring, so I linked them directly using the URL of my observium server in the remote web server page. So, for example one link can appear like this: http://OBSERVIUM_SERVER_IP/graph.php?device=173&type=device_processor&legen… In this "mode" I can see the graph correctly but it's a simple blank page with the graph and legend but without hostname or any reference on it. Do you know is there is an option to add at graph.php to create hostname in the image? Generally: is there a syntax of all the options that we can pass to graph.php to get custom graphs, Regards, Simone

1 0

Alert for Syslog?
by chott＠praha1.net 17 Aug '15

17 Aug '15

Hello Team can i create Alert for Syslog message? Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

3 3

Alerts not clearing
by Robert Williams 17 Aug '15

17 Aug '15

Hi, We seem to have an issue with alerts not clearing (after they are OK) from the Alerts list. Example below shows a checked called “Hardware Fault” which matches Warnings, Alerts and Down status for devices. These items (two output phases) were above a threshold for a period over the weekend, but then went back below it and the event cleared. The device itself shows that the thresholds are OK now but it does list as “Status: Checks Failed” even though the values (and the graph) show it as OK / Green: [cid:image005.jpg@01D0D8D4.84525900] The actual item is here: [cid:image006.jpg@01D0D8D4.84525900] The event in the Main Alerts List is here: [cid:image007.jpg@01D0D8D4.84525900] The Alert Checker configuration is here: [cid:image008.jpg@01D0D8D4.84525900] Sorry for all the images, but it seems the best way to explain this particular issue! This is not the first time this has happened, last week we had 8 items stuck in an alert state, I had to delete the checked and clear the alert table for the so-called “failed” items to make them go away. However, now we have some new alerts they seem to be stuck in the same way. Any ideas? Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

2 1

List of latest alert checkers
by Samarasinghe, Sujith 14 Aug '15

14 Aug '15

Hi , Can you please provide list of sample alert checkers? I tried to add OSPF status but didn't work. It would be handy if you have list of standard alert checkers this seems to be good one. But still missing important stuff http://www.maartenmoerman.nl/?p=612 Thanks, Sujith, Confidentiality Note: This e-mail and any attachments are confidential and may be protected by legal privilege. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation.

5 8

Ubiquiti Unifi AP
by chott＠praha1.net 14 Aug '15

14 Aug '15

Hello team, after add Unifi AP into Observium, system find only -Linux 2.6.22 #1 PREEMPT Mon Jan 19 14:11:12 PST 2015 mips OS = Ubiquiti AirOS [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 9

AUTO: Karsten Schwarz is out of the office (returning 07.09.2015)
by Karsten Schwarz 14 Aug '15

14 Aug '15

I am out of the office until 07.09.2015. In case of Urgent requests please contact other Members of the PSI_Infrastructure team. Emails will be automatically deleted. Note: This is an automated response to your message "Re: [Observium] Better performance on older hardware" sent on 14/08/2015 10:40:41. This is the only notification you will receive while this person is away.

1 0

Incorrect memory graph for large RAM amount
by Louis Bailleul 14 Aug '15

14 Aug '15

Hi, Just discovered a weirdness when I added a server that has 3TB of RAM : the ucd_memory graph is totally messed up. It only displays negative amount of Cache/Shared buffers. The legend shows that it didn't handle the 3TB correctly. But it seems to be fine for the health/memory view where the correct amount is displayed everywhere. I have attached the debug output of the poller for this device. Best regards, Louis

2 1

Better performance on older hardware
by Louis Bailleul 14 Aug '15

14 Aug '15

Hi, I am in the process of qualifying some hardware to run Observium (planning to deploy it in about 25 locations). So I was trying to evaluate the hardware we currently have which consist of Dell R610 and IBM X3550. So we can gauge what we need. The R610 has : - 2x Intel X5660 (6 cores 2.8Ghz + hyperthreading) == total of 12 physical cores and 24 logical - 96Gb of DDR3 1333Mhz - 6x300GB 10K SAS configured as one raid1 of 2 disks for mysql and OS and a raid5 of 4 disks for rrds. - 1Gb network interface The X3550 has : - 2x Intel L5420 (4 cores 2.5Ghz) == total of 8 physical cores - 32Gb of DDR2 266Mhz - 2x200Gb 7.5K SATA configured as one for mysql and OS and one for rrds - 1 Gb network interface So reading this, it seems easy to guess which one should be faster. I am currently testing using : Observium CE 0.15.6.6430 OS Linux 2.6.32-358.14.1.el6.x86_64 [amd64] (CentOS 6.2) Apache 2.2.15 (CentOS) PHP 5.6.11 Python 2.6.6 MySQL 5.6.26-log SNMP NET-SNMP 5.5 RRDtool 1.4.9 From my testing, the poller perform a quite better on the R610 than on the X3550 : Polling the same 310 linux boxes (The slowest devices taking around 35 seconds) this gives an average of : - 8 threads : R610 : 169 seconds X3550 : 213 seconds - 12 threads : R610 : 69 seconds X3550 : 156 seconds - 24 threads R610 : 41 seconds X3550 : 107 seconds - 36 threads R610 : 41 seconds X3550 : 160 seconds - 64 threads R610 : 37 seconds X3550 : 225 seconds - 96 Threads R610 : 40 seconds X3550 : Still running Ok we clearly have a winner here. Bottom line for the poller, you can come close to the time taken by your slowest devices if you add more threads. But it seems that you need quite a few cores available to be able to increase the number of threads without decreasing the efficiency. This was kind of expected. Where the thing becomes weird it's on the web interface and especially the graph rendering : On average starting with a clear cache, the same Linux device page render (graphs included) consistently in about 1 second on the X3550 and in about 4 seconds on the R610 (screenshot attached). Where it became even worse : if you ask the X3550 to connect to the mysql database of the R610 and export the rrds of the R610 over NFS ... the X3550 still render the page faster (still around 1 second). Any guess on what is going on here ? It doesn't seem right that a machine that is definitely faster accessing mysql and updating rrds would be 4 times slower when rendering graphs. Best regards, Louis

5 13

backup data
by Farshid Abediny 14 Aug '15

14 Aug '15

Hi, how can we backup observium data that if our VMs lost we can recover data ? only backup of database rrd/ logs/ folder is enough? thanks,

3 7

Re: [Observium] can't ping error from inside Observium
by Tom Laermans 13 Aug '15

13 Aug '15

Disagree! :) On Aug 13, 2015 5:45 PM, Adam Armstrong <adama(a)memetic.org> wrote: > > Oh yes. I keep forgetting people can add from the web interface. > > I vote to remove adding from the web interface. Again. > > adam. >> >> On 13/08/2015 16:36:40, Tom Laermans <tom.laermans(a)powersource.cx> wrote: >> >> Most likely selinux is not letting apache exec fping. >> >> Tom >> >> On Aug 13, 2015 3:24 PM, Michael Ponto wrote: >> > >> > Good morning all >> > I have a new server setup with Centos 7 and Observium >> > Everything looks good except I can't add any devices. >> > I get an error that says it can't ping the device. >> > >> > I can ping when logged in from the terminal by IP and by Name. >> > FPing also works from the console. >> > IP tables and Firewall have been turned off for trouble shooting. >> > I can add users etc. >> > This is a replacement box so the devices are all configured correctly. >> > >> > Total loss here. >> > >> > _______________________________________________ >> > observium mailing list >> > observium(a)observium.org >> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 3

Re: [Observium] can't ping error from inside Observium
by Tom Laermans 13 Aug '15

13 Aug '15

1 0

Re: [Observium] can't ping error from inside Observium
by ron＠rjr-services.com 13 Aug '15

13 Aug '15

As a CLI person, I agree with Adam. :-) Sent from my Verizon Wireless 4G LTE DROID Tom Laermans <tom.laermans(a)powersource.cx> wrote: -- This message has been scanned by E.F.A. Project and is believed to be clean.

2 1

Re: [Observium] Alert checking on port state change
by Tom Laermans 13 Aug '15

13 Aug '15

Protip: the below statement is not true, there's a toggle for number of seconds to renotify. But indeed, no per-checker config, that one is true ;) Tom On Aug 13, 2015 7:03 AM, Adam Armstrong <adama(a)memetic.org> wrote: > > Hi Tim, > > At the moment Observium is hardcoded to re-notify alerts after 24 hours. > > I think that your use case would be helped by being able to turn this off on a per-checker basis. > > I'll add it to the list :) > > Adam. > > Sent with AquaMail for Android > http://www.aqua-mail.com > > On 12 August 2015 9:02:30 pm Tim Vaughan <tim(a)timvaughan.co.uk> wrote: >> >> Hi all, I'm starting to get my head around Observium alerts. >> >> I want to be alerted if a switch port that was previously down comes up, and vice versa. I don't want to get repeatedly alerted when a port is down (or up), only when it changes state. At the moment I'm using tests "ifAdminStatus equals up" and "ifOperStatus notequals up" for one alert, but I appear to be getting notifications each time the poller runs. Any suggestions on how I can get what I want? >> >> Cheers, >> >> Tim >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>

1 0

Re: [Observium] can't ping error from inside Observium
by Tom Laermans 13 Aug '15

13 Aug '15

Most likely selinux is not letting apache exec fping. Tom On Aug 13, 2015 3:24 PM, Michael Ponto <MPonto(a)team-psc.com> wrote: > > Good morning all > I have a new server setup with Centos 7 and Observium > Everything looks good except I can't add any devices. > I get an error that says it can't ping the device. > > I can ping when logged in from the terminal by IP and by Name. > FPing also works from the console. > IP tables and Firewall have been turned off for trouble shooting. > I can add users etc. > This is a replacement box so the devices are all configured correctly. > > Total loss here. > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Alert checking on port state change
by Tim Vaughan 13 Aug '15

13 Aug '15

Hi all, I'm starting to get my head around Observium alerts. I want to be alerted if a switch port that was previously down comes up, and vice versa. I don't want to get repeatedly alerted when a port is down (or up), only when it changes state. At the moment I'm using tests "ifAdminStatus equals up" and "ifOperStatus notequals up" for one alert, but I appear to be getting notifications each time the poller runs. Any suggestions on how I can get what I want? Cheers, Tim

2 2

can't ping error from inside Observium
by Michael Ponto 13 Aug '15

13 Aug '15

Good morning all I have a new server setup with Centos 7 and Observium Everything looks good except I can't add any devices. I get an error that says it can't ping the device. I can ping when logged in from the terminal by IP and by Name. FPing also works from the console. IP tables and Firewall have been turned off for trouble shooting. I can add users etc. This is a replacement box so the devices are all configured correctly. Total loss here.

2 1

Re: [Observium] svn Checksum mismatch error
by Tom Laermans 13 Aug '15

13 Aug '15

I'll give you that, though i'm pretty sure they also switched to snmp-mibs-downloader :) On Aug 13, 2015 7:51 AM, Adam Armstrong <adama(a)memetic.org> wrote: > > Ubuntu doesn't seem to have quite so much OS-zealotry-fuelled hatred for its users as Debian, though! ;) > > adam. >> >> On 13/08/2015 06:49:46, Tom Laermans <tom.laermans(a)powersource.cx> wrote: >> >> >> On Aug 13, 2015 7:01 AM, Adam Armstrong wrote: >> > >> > Also, I'd recommend Ubuntu, it has fewer strange quirks than Debian. :) >> >> I highly recommend Debian over Ubuntu for exactly that reason :) >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] false device down alerts
by Rudolf Hoehler 13 Aug '15

13 Aug '15

Hello Sujith, When you set an alert you can set the number of polling runs before the alert actually fires. Under Alert Checkers set the "Alert Delay" for the checker to 3 or 4 and see if the results improve. If you are polling every minute you might start a polling run while the previous polling run is still happening. I would up this from 1 minute to about 2 or 3 minutes at least. Would be good to hear other comments on the fast polling time. Rudolf From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of "Samarasinghe, Sujith" <Sujith.Samarasinghe(a)Squarepoint-Capital.com<mailto:Sujith.Samarasinghe@Squarepoint-Capital.com>> Reply-To: "observium(a)observium.org<mailto:observium@observium.org>" <observium(a)observium.org<mailto:observium@observium.org>> Date: Thursday 13 August 2015 at 07:14 To: "observium(a)observium.org<mailto:observium@observium.org>" <observium(a)observium.org<mailto:observium@observium.org>> Subject: [Observium] false device down alerts Hi Team, How to avoid false device down alerts? I think it just single ping and small network glitch on observium server to monitor device alerts are device down. I am polling every minutes though. Is there any way to let observium at least poll second time and alert device is down? Thanks, Sujith. Confidentiality Note: This e-mail and any attachments are confidential and may be protected by legal privilege. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation.

3 4

Re: [Observium] svn Checksum mismatch error
by Tom Laermans 13 Aug '15

13 Aug '15

On Aug 13, 2015 7:01 AM, Adam Armstrong <adama(a)memetic.org> wrote: > > Also, I'd recommend Ubuntu, it has fewer strange quirks than Debian. :) I highly recommend Debian over Ubuntu for exactly that reason :)

2 1

false device down alerts
by Samarasinghe, Sujith 13 Aug '15

13 Aug '15

Hi Team, How to avoid false device down alerts? I think it just single ping and small network glitch on observium server to monitor device alerts are device down. I am polling every minutes though. Is there any way to let observium at least poll second time and alert device is down? Thanks, Sujith. Confidentiality Note: This e-mail and any attachments are confidential and may be protected by legal privilege. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation.

2 1

svn Checksum mismatch error
by Johnson, Edward A. 13 Aug '15

13 Aug '15

We have been running Observium under RHEL 6 for over a year now. After one of the last updates, I noticed that php 5.4 or newer was needed. Unfortunately, php 5.3.3 is current in RHN but I was able to update to 5.4 using a different repository. Then I had an issue with xcache not being available for 5.4. This brings me to my current problem. I decided to go with the approved distro, Debian. My problem is that when I try to execute "svn co http://svn.observium.org/svn/observium/branches/stable observium", I get a few files and then randomly get the error “Checksum mismatch for ‘/opt/observium/somefilename.extension’ If I blow away the /opt/observium directory and run the command again, a different file gives me that error.

2 3

'Duplicate entry' issues on vlans_fdb
by Aaron Mayfield 12 Aug '15

12 Aug '15

Just today I updated to the latest and greatest (0.15.8.6882). I was several revisions behind and several database updates were done as a result. After the update, I noticed my poller.php processes started taking all the CPU, started getting gaps in the graphs, etc. I noticed thousands of these entries in db.log: [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2083-6ef88537f91f' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2083','220115','6ef88537f91f','learned') [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2084-005056a927c2' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2084','220115','005056a927c2','learned') [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2084-a66aaf0bf4cc' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2084','220115','a66aaf0bf4cc','learned') [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2085-228a3d193c66' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2085','220115','228a3d193c66','learned') [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2086-0ee7c729643b' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2086','220115','0ee7c729643b','learned') If I run a poller process against a switch manually, everything seems to run fine with the exception of the fdb-table module, which is taking over 600 seconds to run. Here is the schema of my vlans_fdb file: mysql> show columns from vlans_fdb -> ; +-------------+-------------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +-------------+-------------+------+-----+---------+-------+ | device_id | int(11) | NO | PRI | NULL | | | vlan_id | int(11) | NO | PRI | NULL | | | port_id | int(11) | YES | MUL | NULL | | | mac_address | varchar(32) | NO | PRI | NULL | | | fdb_status | varchar(32) | NO | | NULL | | +-------------+-------------+------+-----+---------+-------+ 5 rows in set (0.00 sec) mysql> mysql> show index from vlans_fdb -> ; +-----------+------------+--------------+--------------+-------------+-----------+-------------+---- ----+--------+------+------------+---------+ | Table | Non_unique | Key_name | Seq_in_index | Column_name | Collation | Cardinality | Sub art | Packed | Null | Index_type | Comment | +-----------+------------+--------------+--------------+-------------+-----------+-------------+---- ----+--------+------+------------+---------+ | vlans_fdb | 0 | dev_vlan_mac | 1 | device_id | A | 15 | ULL | NULL | | BTREE | | | vlans_fdb | 0 | dev_vlan_mac | 2 | vlan_id | A | 18348 | ULL | NULL | | BTREE | | | vlans_fdb | 0 | dev_vlan_mac | 3 | mac_address | A | 128440 | ULL | NULL | | BTREE | | | vlans_fdb | 1 | device_id | 1 | device_id | A | 78 | ULL | NULL | | BTREE | | | vlans_fdb | 1 | port_id | 1 | port_id | A | 431 | ULL | NULL | YES | BTREE | | +-----------+------------+--------------+--------------+-------------+-----------+-------------+---- ----+--------+------+------------+---------+ 5 rows in set (0.04 sec) mysql> Does my table structure look right? I see someone else on the list has had this same issue, but there is no indication that this should be a problem in the latest version. What should I check? Thanks for any help. Aaron Mayfield Cloud Expert Networking Specialist 12400 Hwy. 71 W. Suite 350-407 Austin, TX 78738 T. 512.600.4297 www.artisaninfrastructure.com Partner portal: https://portal.vpdc.us Partner support: support(a)artisaninfrastructure.com This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. Please note that any views or opinions present in this email are solely those of the author and do not necessarily represent those of the company. Finally the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. (Proprietary & Confidential – Artisan Infrastructure, Inc. et all.)

2 2

Link to device - Feature request
by chott＠praha1.net 11 Aug '15

11 Aug '15

Hello team, i have question about create link in observium for open in new tab GUI of device config for example if iam in Device Overview, create some Icon or Text link to open New Tab for Device GUI configuration HTTP? Or SSH plugin https://addons.mozilla.org/EN-us/firefox/addon/firessh/ Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

5 15

Mikrotik SwitchOS long poller
by chott＠praha1.net 11 Aug '15

11 Aug '15

Hello team, we have Mikrotik Switch OS model RB260GS, there is Poller/Discovery Timing about 751s [X] There is Discovery log attached [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

4 12

Broken graph.
by Zafar Pravaiz 11 Aug '15

11 Aug '15

Dear All, I am getting gap in graph for many devices. Any idea what needs to done to fix this. Help Appreciated. Thanks Zafar Pravaiz IT Senior Network Engineer Information Technology Department Tel +971 6 515 2164 Fax +971 6 515 2112 American University of Sharjah PO Box 26666, Sharjah United Arab Emirates http://www.aus.edu <http://www.aus.edu/> zpravaiz(a)aus.edu <mailto:youremail@aus.edu>

4 4

Re: [Observium] links to graphs
by Jeffrey d'Ambly 11 Aug '15

11 Aug '15

Got it working didn’t realize there was a config option for this $config['allow_unauth_graphs'] = 1; # Allow graphs to be viewed by anyone —jeff From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Jeffrey <jeffrey.dambly(a)jasper.com<mailto:jeffrey.dambly@jasper.com>> Reply-To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Date: Monday, August 10, 2015 at 1:36 PM To: "observium(a)observium.org<mailto:observium@observium.org>" <observium(a)observium.org<mailto:observium@observium.org>> Subject: [Observium] links to graphs I’m trying to create a simple dashboard view of some IP SLA graphs using Observium Enterprise, and I was wondering what I needed to do to pull these graphs into the dashboard. Linking to them staticly doesn’t work due to authentication. Is there a built in way I can auth and get a cookie for this? —Jeff

2 1

links to graphs
by Jeffrey d'Ambly 10 Aug '15

10 Aug '15

I’m trying to create a simple dashboard view of some IP SLA graphs using Observium Enterprise, and I was wondering what I needed to do to pull these graphs into the dashboard. Linking to them staticly doesn’t work due to authentication. Is there a built in way I can auth and get a cookie for this? —Jeff

1 0

[sh] <defunct>
by Simon Smith 10 Aug '15

10 Aug '15

Hi All, i did an update this morning to latest SVN and working fine (thumbs up) I then disabled the cron job to update PHP, MySQL and Apache as I’m still using 5.3, 5.2 and 2.2 (updated to 5.6, 5.5 and 2.4) now the apache has just completely gone tits up !? I’m seeing about 50 of ' [sh] <defunct> ' in my ‘ ps aux ‘ erm, where do i begin to start looking? i updated using https://launchpad.net/~ondrej/+archive/ubuntu/php5-5.6 <https://launchpad.net/~ondrej/+archive/ubuntu/php5-5.6> as I’m running ubuntu 12.04 lts regards Simon

6 18

Customer billing
by Jan Kuiper 10 Aug '15

10 Aug '15

Hi, I want to search for bills, but the bill search function does only give all bills instead of the requested Bill Name. Has anyone the same issue, if no what can I do wrong or fix it? I am running the stable version 6833. [cid:image002.png@01D0D38F.90DC38C0] Met vriendelijke groet / Kind Regards, Jan Kuiper [cid:image001.jpg@01CF62F0.6DBAB760] Piramide ICT Services | Kollergang 9 | 7773 NG Hardenberg | Postbus 220 | 7770 AE Hardenberg info(a)piramide.nl<mailto:info@piramide.nl> | http://www.piramide.nl | +31 (0)523 261 387 Disclaimer Deze e-mail is uitsluitend bestemd voor de geadresseerde(n). Verstrekking aan en gebruik door anderen is niet toegestaan. Piramide sluit iedere aansprakelijkheid uit die voortvloeit uit elektronische verzending.

2 1

RRD Graphs
by Andre Geißler 10 Aug '15

10 Aug '15

Hello Looks like the sizes of RRD graphs aren't correct. If in widescreen mode they are too big. In normal mode they are too small. See my attached Images. Andre

2 5

Error: Blank Page - Alert Checks
by Nate Mellendorf 09 Aug '15

09 Aug '15

Good evening, everyone. I've been having some trouble with the alert checks portion of Observium for quite some time now. Whenever I click Alert Checks from the global dropdown menu, an empty white page is displayed. This was working before, and (unfortunately) I'm not certain when it stopped. I know It's not related to any recent updates, as it's been this way for a few months now. We just haven't had time to investigate it further. Example URL: http://obsevium.testing.local/alert_checks/ I've renamed the following files in hopes that it was a simple corruption issue. However, the issue still persists. $ sudo svn update && php discovery.php -u Restored 'html/pages/alert_log.inc.php' Restored 'html/pages/alert_checks.inc.php' Restored 'html/pages/alerts.inc.php' Restored 'html/pages/alert_check.inc.php' At revision 6859. -- Database is up to date. Has anyone seen this before? I'd be more than happy to provide additional debug output. Images: Thank you. Nate Mellendorf | Network Analyst | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 <http://www.netgainhosting.com/> www.NetgainHosting.com _____ The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure. If you have received this message in error, please notify the sender immediately and delete the original. Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited.

2 1

Sensor Alerts
by Andre Geißler 07 Aug '15

07 Aug '15

Hi Is there a way to calculate in Alerts Tests? I think it's better to know temperature is quite close to sensor limit than it has already reached. At the moment we are checking temperature with "|sensor_value greater @sensor_limit|" but would like to be informed a little bit earlier|.| || |I can imagine to do it like that "|||sensor_value greater @sensor_limit - 2|" or "|||sensor_value greater @sensor_limit| * 0,95"| || Andre

2 1

Abnormal value for the alert duration on observium alerts
by Supun Rathnayake 07 Aug '15

07 Aug '15

Hi Observium Team, Wondering whether the Observium team had a chance to looking into this pending issue http://jira.observium.org/browse/OBSERVIUM-906 -- With Best Regards, Supun Rathnayake Lanka communication Services (Pvt) Ltd. 65C, Dharmapala Mawatha, Colombo 07. Sri Lanka. Tel: +94-11-2437545 http://www.lankacom.net

2 1

Re: [Observium] RANCID Script
by Nate Mellendorf 06 Aug '15

06 Aug '15

Here's an example of my CRON job for RANCID: 30 23 * * * root php /core1/observium/scripts/generate-rancid.php > /var/lib/rancid/all/router.db && chown rancid: /var/lib/rancid/all/router.db Not quite sure why yours isn't working though. Permissions, maybe? Nate Mellendorf | NETWORK ANALYST | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 www.NetgainHosting.com -----Original Message----- ---------------------------------------------------------------------- Message: 1 Date: Thu, 6 Aug 2015 10:01:25 +0000 From: "chott(a)praha1.net" <chott(a)praha1.net> To: "observium(a)observium.org" <observium(a)observium.org> Subject: [Observium] RANCID Script Message-ID: <8DE59ADBFC8D06458B47A51E9C02A25CB8A759F6(a)exchange1.airess.cz> Content-Type: text/plain; charset="iso-8859-2" Hello team i have question about Automation of /opt/observium/scripts/generate-rancid.php i have added this 0 5 * * * /var/lib/rancid/bin/rancid-run #hourly router dump 50 23 * * * /usr/bin/find /var/lib/rancid/logs -type f -mtime +2 -exec rm {} \; Into Crontab, but yesterday we are add new switch but Rancid doesnt have in ROUTERS DB file after run manualy /opt/observium/scripts/generate-rancid.php new switch is now in rancid DB file Tomas [email-header-praha1] Tomas Chott technick? ?editel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitn? s?? Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 1

Port status changes
by Andre Geißler 06 Aug '15

06 Aug '15

Hi Could it be possible to show the ports last state change on the port overview page? Something like Port up/down since 2015/08/04 09:33 Port up/down for 1d 3h 10m 30s Maybe as a new column or right below the port's description? Andre Geißler

3 5

RANCID Script
by chott＠praha1.net 06 Aug '15

06 Aug '15

Hello team i have question about Automation of /opt/observium/scripts/generate-rancid.php i have added this 0 5 * * * /var/lib/rancid/bin/rancid-run #hourly router dump 50 23 * * * /usr/bin/find /var/lib/rancid/logs -type f -mtime +2 -exec rm {} \; Into Crontab, but yesterday we are add new switch but Rancid doesnt have in ROUTERS DB file after run manualy /opt/observium/scripts/generate-rancid.php new switch is now in rancid DB file Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 2

95th graph mismatch
by Andrés Pugawko 06 Aug '15

06 Aug '15

Hi Adam, I have an issue measuring 95 percentile interface using two different methods. If I go to the Port page for a specific interface and select a date range for example from 2015-07-01 00:00:00 to 2015-08-01 00:00:00 the 95 % for IN traffic is 563.87M Meanwhile if i take the same measure using the traffic accounting for this interface the 95% is 685M There is something I ain't understand? Or is really an issue? -- Regards Andrés Enviado desde la aplicación myMail para Android -------- Forwarded message -------- De: "Julio Policarpo - NOC CABASE" < noc.julio(a)cabase.org.ar> CC: < andres(a)cabase.org.ar> Fecha: miércoles, 05 agosto 2015, 06:49PM -03:00 Asunto: Graficos del 95th Observium >Andres, te mando los dos gráficos. > >Saludos!!!! > >Julio Policarpo >NOC CABASE > >Suipacha 128 - Piso 3° F >C1008AAD Buenos Aires - Argentina >Tel: (54-11) 4326-0777 int. 109 >www.cabase.org.ar > > >---------------------------------------------------------------------- >El software de antivirus Avast ha analizado este correo electrónico en busca de virus. >www.avast.com

2 1

Plaining LDAP for login
by chott＠praha1.net 06 Aug '15

06 Aug '15

Hello team, we are plaining LDAP authentication for Observium. What happend if LDAP server is not available ? And can i combine LDAP and MySQL logins? For example LDAP for company Users and MySQL for customers/viewers Regards, Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

6 5

Device Not able to Add
by Joy, Jees (KVH) 05 Aug '15

05 Aug '15

Hello All, I am not able to add 2 devices. These are the longest distance & latency devices in our network 124 ms. I wonder if latency have any play while adding the device. Other than these devices I can add almost all other device. Below is the command which I am trying to use to add the device. I alos have tried test commands also, please find my out put below. ./add_device.php <devicename> <communityname> Observium v0.14.10.6812 Add Device(s) Try to add <devicename>: Could not ping <devicename>. Devices skipped: 1. snmpget -v2c -c <community> <device> sysObjectID.0 SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.3224.1.52 Please help. Best Regards, Jees Joy Internal IT "PLEASE NOTE: This email, and any attachments hereto, are intended only for use by the specified addressee(s) and may contain legally privileged and/or confidential and/or proprietary information of KVH Co., Ltd. and/or its affiliates (including personal information). If you are not the intended recipient of this email, please immediately notify the sender by email, and please permanently delete the original, any print out and any copies of the foregoing. "

2 5

County entries Google vs MapQuest and their representation on the Location menu . [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 05 Aug '15

05 Aug '15

I saw a comment in "includes/geolocation.inc.php" about sorting the difference between county and states. I was looking cause i'd like a cleaner looking location menu. so i hijacked a device on the test system and changed it's location to "10 Downing St, London SW1A 2AA, United Kingdom" I see that we have different results depending on who we ask. Geolocation (MAPQUEST) -> [51.503440, -0.127708] United Kingdom (Country), England (State), Unknown (County), London (City) Geolocation (GOOGLE) -> [51.503363, -0.127625] United Kingdom (Country), Unknown (State), Greater London (County), London (City) So a few questions. 1) Is google preferred (especially for people who have sites in a Country that has Counties). 2) Are people happy to have Counties and States on the same level in the menu. 3) Are there countries that have BOTH Counties and States or are they mutually exclusive. 4) Do people need/want the double name entries on the last location menu (two pictures attached to show the difference for what i mean). I have a simple system with ony 38 locations. People may have lots more where this has an advantage. (Embedded image moved to file: pic36298.gif) (Embedded image moved to file: pic21780.gif) thanks Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine(a)familycourt.gov.au ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

2 6

remove county from the locations ? . [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 05 Aug '15

05 Aug '15

(Embedded image moved to file: pic01554.gif) Hi, Is there a setting for removing the County from locations ? example output for Google and mapquest Geolocation (GOOGLE) -> [-35.277334, 149.118210] Australia (Country), Australian Capital Territory (State), Unknown (County), Acton (City) Mapquest adds in County for Canberra but not all other locations. Geolocation (MAPQUEST) -> [-35.281207, 149.114962] Australia (Country), Australian Capital Territory (State), Canberra Central (County), Canberra (City) thanks Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine(a)familycourt.gov.au ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

2 2

disconntinue Please
by Anthony Cozzucoli 04 Aug '15

04 Aug '15

Anthony Cozzucoli | Sr. Wireless Network Technician anthony(a)mobilitie.com 6650 Via Austi Parkway | Las Vegas | NV 89119 702 885 8151 mobile 702-777-4510 Office www.mobilitie.com CONFIDENTIALITY NOTICE | The email message is for the exclusive use of the addressee(s) and contains confidential, privileged and non-disclosable information. If the recipient of this message is not the addressee, or a person responsible for delivering the message to the addressee, such recipient is prohibited from reading or using this message in any way. If you have received this message by mistake, please call us immediately and destroy the email message.

7 9

Synology DSM3
by chott＠praha1.net 04 Aug '15

04 Aug '15

Hello team we have Synology with DSM 3.1 and Observium recognize as Linux backupnas 2.6.15 #1637 Sat May 4 05:59:19 CST 2013 armv5tejl Is there support for DSM 3.1? Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

3 6

New Statuses Bar Overview Page - shows alerts
by Basile Bluntschli 04 Aug '15

04 Aug '15

Hi All after a recent update there was the Statuses Overview addedd. (I currently run 6812) As of now I see 12 alerts which all translate to Fan State of Brocade Switches and Routers. Please see the attached screenshot. The top two are Brocade CER routers. All devices below are Brocade FCX624. How can I debug this further? Or how can I disable this statuses alert? Thanks Basile

2 3

Question about aggregated traffic graph for Dell DRAC
by Steffie Morris 04 Aug '15

04 Aug '15

Hi, i have some Dell DRAC's added to observium, and i am seeing some strange things. The aggegrated graph from the overview page of the device gives an error "error Drawing graph". However the individual graphs per port are created just fine. the poller.php -d doesn't give any errors that i can see. Another question is probably about all the metrics received from DRAC, i have a few OSses that have the Dell ISM (Integrated Service Module) installed. This allows the NIC's from the OS to be seen in the DRAC web interface. Would observium be able to read these ports as wel? Tnx! Steffie

1 1

Qestion about VLANs tab on switch page
by Steffie Morris 04 Aug '15

04 Aug '15

Hi, i also have a question about the VLANs tab for switches. Why are a lot of switchports displayed being a member of VLAN1? because i don't think these ports are in vlan1? On the Ports page for different model switches, there are also differences. For cisco it is able to display the (untagged) vlan, but for some switch vendors it will say in text Dot1Q. Perhaps because the vendor will return a native and a untagged vlan (even if they are the same?) Just trying to understand what i am looking at, and how the interpret :)

2 1

FreeRADIUS on Observium server?
by Jason Vanlandingham 04 Aug '15

04 Aug '15

Has anyone run FreeRADIUS on the same server as Observium? Any issues? I'm running on CentOS 6.6 and am wondering if anything will "step on" Observium; MySQL settings, maybe?

3 3

incomplete inventory in Synology NAS?
by Steffie Morris 04 Aug '15

04 Aug '15

Hi, i added a few synologyNAS to play with in observium and i noticed that the inventory tab seems incomplete. In the main overview i see there are 8 disks in the system, but in the inventory tab only 5 numbered items are listed. But all the /dev/sdx devices are listed. 1536 ST3000DM001-1CH166 hrDeviceDiskStorage 0 1537 ST3000DM001-1CH166 hrDeviceDiskStorage 0 1538 ST3000DM001-1CH166 hrDeviceDiskStorage 0 1539 ST3000DM001-1CH166 hrDeviceDiskStorage 0 1540 ST3000DM001-1CH166 hrDeviceDiskStorage 0 1552 SCSI disk (/dev/sda) hrDeviceDiskStorage 0 1553 SCSI disk (/dev/sdb) hrDeviceDiskStorage 0 1554 SCSI disk (/dev/sdc) hrDeviceDiskStorage 0 1555 SCSI disk (/dev/sdd) hrDeviceDiskStorage 0 1556 SCSI disk (/dev/sde) hrDeviceDiskStorage 0 1557 SCSI disk (/dev/sdf) hrDeviceDiskStorage 0 1558 SCSI disk (/dev/sdg) hrDeviceDiskStorage 0 1559 SCSI disk (/dev/sdh) hrDeviceDiskStorage 0 Is there anything i can do to add or check to help in see what is going wrong? (if there is going wrong at all :)

3 6

observium stopped graphing
by Stefano Lobrano 02 Aug '15

02 Aug '15

Hello list, after a file system problem (/ mounted RO and subsequently fixed) Observium has stopped all the graphs. Apparently everything is working, I've already done a mysqlcheck and DB looks OK, but graphs are empty: Can anyone help? Thanks a lot in advance, Stefano -- Stefano Lobrano ================================ Webfarm Aruba.it http://www.aruba.it Office: 0575/1939136 Mobile +39 348 8694047 N° fax: 0575/862300 N° centralino: 0575/0501 e-mail: stefano.lobrano(a)staff.aruba.it ================================

4 7

Device Request?
by Johnson, Edward A. 31 Jul '15

31 Jul '15

Can we request devices to be added to Observium? It would be great to see Sophos’ products supported.

4 3

Sonicwall MIBS
by Kevin Jacobson 31 Jul '15

31 Jul '15

FYI...latest Sonicwall MIBs are here, which are newer than what are currently in Observium. http://software.sonicwall.com/SNMP/SNMPMIBS6222-19ne.zip I don't know whether you need to be on this particular firmware for this to be useful or not. Thanks.

1 0

LAN Controller - automation
by chott＠praha1.net 31 Jul '15

31 Jul '15

This is very good solotuin for Automation, temperature, relay etc... Price is 30-40USD http://www.tinycontrol.pl/en/index.html http://www.tinycontrol.pl/en/lan/dokumentacja_firmware.html In manual i find OID for every field, and now we using LAN Controller with PRTG because Observium cannot resolve This is for future request :-) Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 1

Xerox printer
by chott＠praha1.net 31 Jul '15

31 Jul '15

Hello team, some time back my Printer Xerox WorkCentre M118 is now as Unknown Device in Observium, probably after update SVN from CE to PRO before i see Xerox Icon now i see only Question mark Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

3 4

Configuring map interface on new observium installation
by Andi Qirjazi 31 Jul '15

31 Jul '15

Hi, I have just installed & configured observium for the first time. The first two devices are added and seems working, but I'm having problem displaying these devices on the map. All the time there is a blue sign on the middle on Atlantic ocean, it doesn't matter what I configure as device location. Please any idea how to configure the map? I have tried all the possible configurations at /opt/observium/config.php settings but with no success. This installation is behind a proxy server, but I have allowed all the traffic from observium host and I don't see any traffic from this host towards proxy server. I did the following configuration on monitored devices for SNMP settings as follow: R_TR#sh run | s snmp snmp-server community aaaaaaa RO snmp-server ifindex persist snmp-server location Berlin, DE snmp-server contact bbbbbbbbbb at Observium main page, at location tab, is listed Berlin, DE (or Rome, IT another device) but no indication on the map for both devices. regarding proxy server configuration, at \opt\observium\config.php file I have the following settings: //configure proxy server settings $config['http proxy'] = "myproxy:8080"; with no username and password, because I have allowed all the traffic from observium host and it has internet access, because I did manually update and it worked normally. Please could you send me a sample of a working map configuration? I have the following configuration regarding geolocation at config.php file: // $config['frontpage']['map']['region'] = " https://developers.google.com/chart/interactive/docs/gall$ $config['geocoding']['enable'] =TRUE; $config['geocoding']['dns'] = FALSE; $config['location_menu_geocoded'] = FALSE; $config['geocoding']['api'] = ' www.googleapis.com/geolocation/v1/geolocate?key=aaaaaaaaaaaaaaaaaaaaa'; I even tried with just 'google' as API, but it doesn't change anything. thanks in advance, Andi Qirjazi

9 16

CIsco AccessPoints are no servers
by Andre Geißler 31 Jul '15

31 Jul '15

Hi We are monitoring some Cisco WLAN Accesspoints (WAP321). These devices are shown as servers. I would expect them to be WLAN or more generally network devices. This is what I can see on the overview page Linux 2.6.21.5-lvl7-dev, Cisco Small Business WAP321 (WAP321-E-K9), Version 1.0.5.3 Wed Sep 10 13:20:36 EDT 2014 Hardware WAP321 Wireless-N Selectable-Band Access Point with Single Point Setup Operating System Linux Cisco Could that be changed? -- Andre Geißler ----- PGP Public Keys ----- http://keyserver.ubuntu.com/pks/lookup?search=Andre+Geißler https://pgp.mit.edu/pks/lookup?search=Andre+Geißler

2 2

version CE 0.15.6.6430 - AIX - includes/definitions/os.inc.php [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 30 Jul '15

30 Jul '15

Hi, noticed that includes/definitions/os.inc.php, line 445 has a blacklist for 'HOST-RESOURCES-MIB' just wondering why it might be there. it's causing all graphs to disappear on an upgrade or not appear for a new installation. i've commented it out and things appear to be coming back (just in case this isn't in your system yet) thanks Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine(a)familycourt.gov.au ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

2 1

Observium Apache 2 web service
by Federico Olivieri 29 Jul '15

29 Jul '15

Hi All, I was running OBSERVIUM as only service on my Apache configuration and it was fine. However I needed to add another software via web interface and I roll backe the Apache configuration.. >From that point I m not able anymore to access to OBSERVIUM (as aspected) I tried http://ipaddrress/opt/observium/ but it doesn t work. That s my conf. How can I run 2 web interface via Apache? <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> #<VirtualHost *:8080> # DocumentRoot /opt/observium/html/ # ServerName observium.domain.com # CustomLog /opt/observium/logs/access_log combined # ErrorLog /opt/observium/logs/error_log # <Directory "/opt/observium/html/"> # AllowOverride All # Options FollowSymLinks MultiViews # </Directory>

3 10

Rancid and Ubiquiti
by chott＠praha1.net 29 Jul '15

29 Jul '15

Hello team we have success implement Cisco Small Business Switches into RANCID i looking for support Ubiquiti and there is support but what about Ubiquiti and Observium vs. Rancid? I means AirOS - Nanobridge etc... 'ubnt' => 'urancid', 'ubnt-es' => 'ubnt-es-rancid', https://github.com/dotwaffle/rancid-git/tree/master/bin [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

3 3

Error drawing graph afetr upgrade SVN
by chott＠praha1.net 29 Jul '15

29 Jul '15

After upgrade SVN switch Erroring drawing graph in Overview tab, probably after add Stack port to inventory Hardware Cisco 3750G 2015-07-28 18:48:35 Switch 1 stacking role<http://dohled.praha1.net/device/device=1/tab=health/metric=status/id=115/> Status added: cisco-stackwise-member-state cswSwitchRole.1001 Switch 1 stacking role [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

5 7

Support MIB for SIKLU
by chott＠praha1.net 29 Jul '15

29 Jul '15

Hello Team, we have lot of radios SIKLU 1200 http://www.siklu.com/ Is there some free time for add to observium? Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

1 0

Wiki Down?
by Rudolf Hoehler 28 Jul '15

28 Jul '15

Hello Team, Are you doing maintenance on the website? The wiki links don't work from google searches any more? Specifically the nfsen and rancid pages are not working. Not sure how to test the rest. Regards, Rudolf

3 2

"A lot of ports": Error Drawing Graph
by Wiethoff, Helge 28 Jul '15

28 Jul '15

Hi all, my problem is, that a few overall traffic graphs aren‘t displayed, since updating from r6722 (2015-07-21) to r6766. This only occurs with devices that have more than about 100 ports. (These are not incredibly many ports, but in this case the problem occurs in this magnitude.) I tried to update the device by discovery.php and poller.php without success. The debugging message (&debug=1) says that the rrd command fails: RRD_STATUS[FALSE]. When i copy the RRD-Cmd and execute it within the shell, it works fine. Interestingly, for a device with 98 ports the problem occurs only for the large graphs shown (as can be seen in the attached screenshot grapherror.png). Has anyone of you an idea? That would be nice :) Regards, Helge ________________________________ Helge Wiethoff Medienzentrum Telefon: +49 (234) 968 8717 Fax: +49 (234) 968 3453 E-Mail: Wiethoff(a)tfh-bochum.de Technische Fachhochschule Georg Agricola für Rohstoff, Energie und Umwelt zu Bochum Staatlich anerkannte Fachhochschule der DMT-Gesellschaft für Lehre und Bildung mbH Herner Straße 45 44787 Bochum http://www.tfh-bochum.de ________________________________ Träger: DMT-Gesellschaft für Lehre und Bildung mbH Sitz der Gesellschaft: Bochum Registergericht: Amtsgericht Bochum Handelsregister: B 4052 Geschäftsführung: Prof. Dr. Jürgen Kretschmann (Vorsitzender) Manfred Freitag

3 3

Restrict config access to users
by Spencer Ryan 28 Jul '15

28 Jul '15

Hey Adam (and all), I asked about this previously but never heard back. I'd really like a way to give people the ability to see a device but not see the config tab. We've got rancid integration turned on, and I want to give specific users access to see devices, but they shouldn't be able to see the device configs. Hopefully it would be easy to do (maybe say users with a level of < X can't see that tab) Thanks! *Spencer Ryan* | Senior Systems Administrator | sryan(a)arbor.net *Arbor Networks* +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com

4 4

eth0, vlan, missing port speeds
by Simon Smith 28 Jul '15

28 Jul '15

Hi All, this is a random question, I’ve just noticed on my Observium that the is no Port speeds for any of our Ethernet ports on our debian servers ? but also, the is no Ports speeds for any of our VLAN interfaces on our mikrotik switches either ? I don’t have any event-logs showing the speeds changed or anything? where should i begin looking why the speeds have just vanished? Regards Simon

1 0

Design idea
by Zach Underwood 28 Jul '15

28 Jul '15

Before we spend to much time setting something up I want to make sure that I was on the right track. We have many wireless ubnt unifi APs and there snmp on the APs themselves sucks. But the wireless controller does have a nice API what print out a json output listing every client connect to AP managed by the controller. The json has the mac, connection time, connection duration, AP currently connection to and much more. The idea is to use the unix/linux agent on the controller to connection to API on localhost and download json and clean data up. The observium can poll the unix agent and chart/display the data. Is this crazy or am I on the right track.

2 2

Re: [Observium] SNMP Synology vs. QNAP
by ron＠rjr-services.com 27 Jul '15

27 Jul '15

Just for grins, I checked mine this morning before running the latest round of updates (which I usually only do manually once a week), and my TS-269L's serial was showing correctly in the inventory screen... was there really anything broken? Sent from my Verizon Wireless 4G LTE DROID chott(a)praha1.net wrote: -- This message has been scanned by E.F.A. Project and is believed to be clean.

3 2

SNMP Synology vs. QNAP
by chott＠praha1.net 27 Jul '15

27 Jul '15

Hello we are using primary Synology NAS and there is lot of support in Observium now we have QNAP and there missing some field in attach sends info Serial number - iso.3.6.1.2.1.47.1.1.1.1.11.1 = STRING: "Q131I11208" now we cooperate with QNAP, because SysLocation and SysContact missing ing SNMPWALK [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

4 16

Need more info about Observium and IPMI
by Henry Collins 26 Jul '15

26 Jul '15

Hello Observium community, I am using Observium Professional version and I have some computers that only support IPMI protocol and not SNMP. Observium's wiki is very ambiguous and there is not enough information about usage of IPMI in Observium. Did anyone manage to successfully use IPMI together with Observium? It would be very nice to get more information about this and maybe even a guide on how you add a device that only supports IPMI protocol. Best regards, Henry Collins

2 1

saf tehnika support
by Zach Underwood 26 Jul '15

26 Jul '15

I would like to get support for my SAF gear. I did not write this code is was wrote by mgibbons(a)oemcomp.com and my company paid him to write the code. Attached is the mib file. If you would like SNMP access I can get you that access. 'oids' => array( 'sysTemperature' => array('descr' => 'Radio Temp', 'ds_type' => 'GAUGE'), 'radioTxPower.local' => array('index' => '', 'descr' => 'Tx Power Local', 'ds_type' => 'GAUGE'), 'radioTxPower.remote' => array('index' => '', 'descr' => 'Tx Power Remote', 'ds_type' => 'GAUGE'), 'radioRxLevel.local' => array('index' => '', 'descr' => 'Rx Level Local', 'ds_type' => 'GAUGE'), 'radioRxLevel.remote' => array('index' => '', 'descr' => 'Rx Level Remote', 'ds_type' => 'GAUGE'), 'radioTxFrequency.local' => array('index' => '', 'descr' => 'Tx Frequency Local', 'ds_type' => 'GAUGE'), 'radioTxFrequency.remote' => array('index' => '', 'descr' => 'Tx Frequency Remote', 'ds_type' => 'GAUGE'), 'radioRxFrequency.local' => array('index' => '', 'descr' => 'Rx Frequency Local', 'ds_type' => 'GAUGE'), 'radioRxFrequency.remote' => array('index' => '', 'descr' => 'Rx Frequency Remote', 'ds_type' => 'GAUGE'), 'modemTotalCapacity.local' => array('index' => '', 'descr' => 'Total Capacity Local', 'ds_type' => 'GAUGE'), 'modemTotalCapacity.remote' => array('index' => '', 'descr' => 'Total Capacity Remote', 'ds_type' => 'GAUGE'), 'modemACMtotalCapacity.local' => array('index' => '', 'descr' => 'ACM Total Capacity Local', 'ds_type' => 'GAUGE'), 'modemACMtotalCapacity.remote' => array('index' => '', 'descr' => 'ACM Total Capacity Remote', 'ds_type' => 'GAUGE'), 'modemRadialMSE.local' => array('index' => '', 'descr' => 'Radial MSE Local', 'ds_type' => 'GAUGE'), 'modemRadialMSE.remote' => array('index' => '', 'descr' => 'RADIAL MSE Remote', 'ds_type' => 'GAUGE'), 'modemSymbolRateTx.local' => array('index' => '', 'descr' => 'Symbol Rate Tx Local', 'ds_type' => 'GAUGE'), 'modemSymbolRateTx.remote' => array('index' => '', 'descr' => 'Symbol Rate Tx Remote', 'ds_type' => 'GAUGE'), 'modemSymbolRateRx.local' => array('index' => '', 'descr' => 'Symbol Rate Rx Local', 'ds_type' => 'GAUGE'), 'modemSymbolRateRx.remote' => array('index' => '', 'descr' => 'Symbol Rate Rx Remote', 'ds_type' => 'GAUGE'), 'modemLDPCdecoderStress.local' => array('index' => '', 'descr' => 'Decoder Stress Local', 'ds_type' => 'GAUGE'), 'modemLDPCdecoderStress.remote' => array('index' => '', 'descr' => 'Decoder Stress Remote', 'ds_type' => 'GAUGE'), 'modemErroredBlock' => array('descr' => 'Errored Block Counter'), 'modemErroredSecond' => array('descr' => 'Errored Second Counter'), 'modemSeverelyErroredSecond' => array('descr' => 'Severely Errored Second Counter'), 'modemBackgroundBlockErrror' => array('descr' => 'Background Block Error Counter'), 'modemTotalBlockNumber' => array('descr' => 'Total Block Counter'), 'modemUptime' => array('descr' => 'Modem Up Time', 'ds_type' => 'GAUGE'), 'modemUnavailtime' => array('descr' => 'Modem Unavailable Time', 'ds_type' => 'GAUGE'), ) ); -- Zach Underwood (RHCE,RHCSA,RHCT,UACA) greenvilletowers.com My website <http://zachunderwood.me>

2 9

Re: [Observium] observium Digest, Vol 60, Issue 190
by Nate Mellendorf 25 Jul '15

25 Jul '15

Adam, I'll try and look into that for you. After searching, it looks like Tom may have been working on this: http://postman.memetic.org/pipermail/observium/2014-June/007029.html Some additional info (may or may not be relevant): https://git.h3rrmann.ch/tobias/observium/blob/develop/mibs/kemp/IPVS-MIB Thanks! Nate Mellendorf | NETWORK ANALYST | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 www.NetgainHosting.com The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure. If you have received this message in error, please notify the sender immediately and delete the original. Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited. -----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of observium-request(a)observium.org Sent: Friday, July 24, 2015 8:54 PM To: observium(a)observium.org Subject: observium Digest, Vol 60, Issue 190 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: KEMP MIB Support in Observium (Adam Armstrong) 2. Re: Traffic Bills (Phillip Baker) ---------------------------------------------------------------------- Message: 1 Date: Sat, 25 Jul 2015 02:29:23 +0100 From: "Adam Armstrong" <adama(a)memetic.org> To: "" <observium(a)observium.org> Subject: Re: [Observium] KEMP MIB Support in Observium Message-ID: <f2afd5c7-6ca2-440a-ad56-9fa42a2500dd(a)getmailbird.com> Content-Type: text/plain; charset="utf-8" Do you have any documentation on what they present in their MIBs? adam. On 25/07/2015 02:24:16, Nate Mellendorf <nate.mellendorf(a)netgainhosting.com> wrote: Observium team, ? I believe this was sent in once before, but I think KEMP has since added a free version of their LM to the market. http://freeloadbalancer.com/ [http://freeloadbalancer.com/] ? Do you have a suggested path that we could go down, to get their MIBS added to Observium? It?s something we?re quite interested in, and would love to contribute back for this service. ? Now that their LM has a free version, anyone on the team could grab it and see what?s there. ? As always, Thanks again for all that you do. We?re greatly enjoy the professional version of your product! ? ? KEMP vs. Netscaler Example: ? KEMP: ? ? Netscaler: ? ? ? Nate Mellendorf | Network Analyst | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 www.NetgainHosting.com [http://www.netgainhosting.com/] The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure.? If you have received this message in error, please notify the sender immediately and delete the original.? Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited.?????????????? ?

1 0