- observium - lists.observium.org

Maps
by Mezzadri, Steven 12 Apr '23

12 Apr '23

After upgrading to 23.4.12634 this weekend, my "openmaps" maps have disappeared from the dashboard. Any way to get them back? -- Steven Mezzadri Network Engineer (248) 344-3680 (office/helpdesk) (248) 344-3260 (direct) (248) 483-1894 (cell) https://helpdesk.northvilleschools.org/ https://www.northvilleschools.org

2 3

VMWare ESXi looses CPU information
by Basile Bluntschli 12 Apr '23

12 Apr '23

Hi Observium Team since a few SVN updates, ESXi start loosing CPU information after full discovery. It is not clear what triggers it... However the ESXi have not been updated, but Observium is at the latest version from rolling SVN. What would you need to further debug it? Kind regards Basile

4 4

port down on web ui
by Arnoldo Vidal Bravo 05 Apr '23

05 Apr '23

Hi, When a monitored port change from up to down... in the web ui show a warning (yellow).. this is ok, but We can setup to show this warnings on limited time (1 hr, 3 hr)? To Us is not important see this warning during 20 hr. only on first minutes -- Saluda cordialmente

1 0

unexpected svn upgrade behaviour.
by David Milton 05 Apr '23

05 Apr '23

Hello, After the latest date I seem to be showing different versions: -sh-4.2$ svn up Updating '.': At revision 12625. -sh-4.2$ ./discovery.php -u ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 23.4.12622 https://www.observium.org -- Database is up to date. -- Observium is up to date. Did a db update get missed for the new version? Thanks, Dave.

1 0

error when running ./discovery.php -u
by Fred Sharpsteen 31 Mar '23

31 Mar '23

After doing an svn update, if I run ./discovery.php -u I get this error. PHP Fatal error: require(): Failed opening required '/root/observium/config.php' (include_path='.:/usr/share/php') in /root/observium/includes/sql-config.inc.php on line 25

2 3

warnings on web ui
by Arnoldo Vidal Bravo 29 Mar '23

29 Mar '23

hi. Can I adjust the time when port down is shown as warning in web ui? from setup on web ui. -- Saluda cordialmente

2 2

Can't get FDB table from 3Com devices
by Arnoldo Vidal Bravo 29 Mar '23

29 Mar '23

It can be resolve permanently? on search by device hostname ... it is shows cisco, hp, and 3com devices . [image: image.png] But when we search by fdb (very usefull, save much time) not show 3com devices. MAC address not found... We test a specific version and works. solved on r12205 -- Saluda cordialmente

2 1

Adding custom probe
by Pieter De Wit 23 Mar '23

23 Mar '23

Hi, I have added some custom probes in the "/usr/lib/nagios/plugins” but I can’t get them to show up in the WebUI. I have done some googling to find if there is a config option that I need to add but so far I have failed. Can someone please point me in the right direction for this ? Thanks !

2 1

Alerting if LAG member drops?
by Bryan Fields 22 Mar '23

22 Mar '23

I'm looking at an easy way to send an alert if a LAG member drops. Running subscription Observium 22.12.12421 and talking a Juniper EX4500 switch. My thought was to have a global check that looked for ifType = ieee8023adLag and then if there was some way members changed, but I don't see a way to detect/check for this. I don't think Observium has any graphing on the LAG port members state. BTW, this would be a great thing to add to have viability into LAG members at the ae level. Perhaps checking if ifHighSpeed goes down? Other than putting up check on the underlying interfaces manually, does anyone have an idea on this? Thanks, -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net

3 3

to calculate time in poll
by Arnoldo Vidal Bravo 22 Mar '23

22 Mar '23

hi, When we run manualy "./poller-wrapper.py", we don't see output logs to know how much time need to poll the devices. only tells on cli: "INFO: starting the poller at 2023/03/22 09:18:50 with XX threads" other thing (may be related) when we run "./poller.php" its not return to cli. -- Saluda cordialmente

1 1

order of poll
by Arnoldo Vidal Bravo 20 Mar '23

20 Mar '23

hi The devices ...are polled sorted by name, IP address, location, random? -- Saluda cordialmente

3 2

DB Too many connections
by Arnoldo Vidal Bravo 15 Mar '23

15 Mar '23

Hi We perform an update to our DB to mariadb 10.11, but now it show this message DB not connected, please check database connection configuration.DB Error 1040: Too many connections. By defaults, Mariadb support only 100 connections, How much connections we must enabled (recommended)? pd: we changed to 500 connections but the message shows again -- Saluda cordialmente

2 9

Windows OS upgrade / broke connection
by McGranahan, Jamen (VU) 13 Mar '23

13 Mar '23

Good morning, We have 2 Windows servers that we upgraded from Windows 2012 to Windows 2019. Originally, I had both connected to Observium and was monitoring them, but since the upgrade, Observium is unable to connect to them and I do not know why. On the first one, I even removed it entirely from Observium but now cannot even re-add it. SNMP is running on both systems and settings are the same as what is on another Windows 2019 server that is working correctly, so I am really confused. Ideas or suggestions are welcome! (we're running Observium 23.2.12520 on a Centos 7 system, using the Observium Professional license) [Vanderbilt] Jamen McGranahan Associate Director of Library Technology & Digital Services, Vanderbilt Library Vanderbilt University 615.343.1614 | jamen.mcgranahan(a)vanderbilt.edu<mailto:jamen.mcgranahan@vanderbilt.edu> | https://www.library.vanderbilt.edu/ Central Library, 419 21st Avenue South Nashville, TN 37203 Pronouns: he/him/his [cid:image002.png@01D95589.085048A0]

3 2

Application Deleted
by Yesaya A. Medellu 13 Mar '23

13 Mar '23

Dear All how do I restore application on Observium Apps Menu, in my case Apache/HTTPD regards Abraham Makingroup Disclaimer: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy this email. Please notify the sender immediately by email if you have received this email by mistake and delete this email from your system. Makingroup Disclaimer: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy this email. Please notify the sender immediately by email if you have received this email by mistake and delete this email from your system.

2 1

Mac address connected to switch port
by Arnoldo Vidal Bravo 12 Mar '23

12 Mar '23

Hi. When we perform an fbd search.. this results an list of ports where the mac address would be connected. where is it saved?.. or not is saved? -- Saluda cordialmente

2 1

Alertas
by Oscar Sánchez Mora 10 Mar '23

10 Mar '23

Someone has managed to send alerts via Telegram, esque try to send them by SMTP and did not work, try to use postfix and not super install it, if you can help me with a video or something with the installation of a way to send alerts [cid:image001.png@01D9536B.56736730]

1 0

Email alerts not working
by Re Tech 10 Mar '23

10 Mar '23

I am new to observium. I am trying to setup email alerts and they are not sending. I have attached screenshot of my settings and hoping someone can help me figure this out.

3 3

Alertas
by Oscar Sánchez Mora 09 Mar '23

09 Mar '23

Someone has managed to send alerts via Telegram, esque try to send them by SMTP and did not work, try to use postfix and not super install it, if you can help me with a video or something with the installation of a way to send alerts [cid:image001.png@01D952AF.89AB2730]

1 0

mac address and switch port located
by Arnoldo Vidal Bravo 08 Mar '23

08 Mar '23

Hi. When we perform an fbd search.. this results an list of ports where the mac address would be connected. where is it saved?.. or not is saved? -- Saluda cordialmente

1 0

Re: Missing some nice stats from Cisco 9800 that I got
by Adam Armstrong 08 Mar '23

08 Mar '23

1 0

Observium stopped firing alerts to contacts
by Andrew Caplice 07 Mar '23

07 Mar '23

Hi all, I am having an issues where suddenly observium has stopped sending alerts to contacts. I have had PagerDuty up and running for almost a year and suddenly today we had a device go down and pager duty didn’t fire an alarm. As you can see below the device alarmed but there is not alert send message or the recovery. [cid:image007.png@01D94138.0CF0EC30] I have the device grouped in a group aptly named Access Switch. The alarm is configured as follows: [cid:image008.png@01D94138.67223790] I also have the pagerduty contact configured for this service. I have blanked the api key for security reasons. [cid:image009.png@01D94138.E250F230] Is there a process that handles contacts the needs to be restarted or am I missing something. No changes to my knowledge have been made to the configuration. As I stated earlier this has been working for close to a year. Any help would be appreciated. Thanks, Andrew [Woods Hole Oceanographic Institution]<https://www.whoi.edu/> Andrew Caplice | Senior Network Engineer Information Services p: (508) 289 2472<tel:(508)%20289%200000> c: (774) 722-2633 <tel:(508)%20289%200000> acaplice(a)whoi.edu<http://www.whoi.edu> [facebook]<https://www.facebook.com/WoodsHoleOcean> [twitter]<https://twitter.com/WHOI> [instagram]<https://www.instagram.com/whoi.ocean/> [YouTube]<https://www.youtube.com/user/WoodsHoleOceanInst> [linked in]<https://www.linkedin.com/school/woods-hole-oceanographic-institution/>

3 3

Alert Custom OID
by Arnoldo Vidal Bravo 03 Mar '23

03 Mar '23

Hi We have observium 23.2.12520 subscription edition. it works create a functionally alert to custom OID? where we can find info or examples? [image: image.png] -- Saluda cordialmente

2 1

graph default dashboard
by Arnoldo Vidal Bravo 01 Mar '23

01 Mar '23

Hi. We have 2 graphic on the default dashboard. traffic In/Out on specific interface and temperature on specific device. We must change these graphics, but on new graphic not displays the axis legend... the black arrow is in the new graph... no axis legend the green arrows is in the old graph... axis legend displayed [image: image.png] observium: 23.2.12520 -- Saluda cordialmente

2 1

Bug report: multiple devices API call breaks when filtering fields
by Corwin Ziegler Hunts 01 Mar '23

01 Mar '23

The multiple devices API call combined with field filtering fails for us in the latest stable release, revision 12520 from 2023-02-08. The API call responds with an HTTP 200 but the data contained in the response is incomplete. It worked when we were on revision 12342 from 2022-10-24. It still works if no filtering is requested. After experimenting further and looking at the code we found that the multiple devices API call can successfully be combined with filtering only if device_id is one of the requested fields. We suspect this broke in revision 12452. Works: GET /api/v0/devices/?type=firewall GET /api/v0/devices/?type=firewall&fields=status_type,device_id Fails: GET /api/v0/devices/?type=firewall&fields=status_type {"count":2,"status":"ok","devices":{"":{"status_type":"ok"}}} Corwin

2 1

after update problem with location
by Arnoldo Vidal Bravo 01 Mar '23

01 Mar '23

Hi, after update i can't put a specific location. Geolocation is an option? observium to test [image: image.png] observium deployed [image: image.png] Geolocation tab is not displayed other thing all devices are show in 1 location. [image: image.png] -- Saluda cordialmente

2 1

Problem with observium
by Arnoldo Vidal Bravo 01 Mar '23

01 Mar '23

Hi, We are using observium over a centos 7 (php 7.0.33), recently we are update our observium to 23.2.12520 (svn update) and we have a something problems on tables or alerts. On device properties -> ports, the items (vlan and physical interfaces) are showit order by ifIndex not by port name or description, screenshot a Aruba Procurve 2530 [image: image.png] pd: problem is the same migrating DB from previous version or deleting device. in the previous version (like 21.*) the table show data ordered by port name. -- Saluda cordialmente

2 1

Add internal Observium MIBS to Discovery/Poll of a device | Observium Community Edition 23.1.12493
by Alisha Manuela Stutz 28 Feb '23

28 Feb '23

Hello all, When I do a snmpwalk in the CLI with the following parameters I see everything as it should be. ./snmpwalk -v3 -a SHA -A SHAPASS -x AES-256-C -X AES256PASS -l authPriv -u AUTHPRIVUSER FQDN -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/nokia:/opt/observium/mibs/alcatel:/opt/observium/mibs/alcatel-ent -m TROPIC-SYSTEM-MIB However, Observium only ever sees the following when doing a manual discovery in the CLI, and doesn't take everything into account because I can't specify the mibs and the corresponding mib file. ./discovery.php -h 137 -dd ... ... ##### Starting discovery run at 2023-02-24 13:04:57 ##### SQL[SELECT * FROM `devices` WHERE `disabled` = 0 AND `device_id` = '137' AND `status` = '1' AND `poller_id` = '0' ORDER BY `last_discovered_timetaken` ASC] ROWS[1] SQL RUNTIME[0.00030303s] CMD[/usr/bin/snmpget -v3 -l 'authPriv' -n '' -x 'AES-256-C' -X 'AES256PASS' -a 'SHA' -A 'SHAPASS' -u 'AUTHPRIVUSER' -Pud -OQUsn -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'FQDN':'161' .1.3.6.1.2.1.1.2.0 .1.3.6.1.2.1.1.3.0] CMD EXITCODE[0] CMD RUNTIME[0.0559s] STDOUT[ .1.3.6.1.2.1.1.2.0 = .1.3.6.1.4.1.7483.1.3.1.6 .1.3.6.1.2.1.1.3.0 = 7:2:50:08.76 ] SNMP STATUS[TRUE] ... ... So I added the following to the observium config file $os = "nokia-xwdm"; $config['os'][$os]['text'] = "Nokia xWDM"; $config['os'][$os]['type'] = "optical"; $config['os'][$os]['vendor'] = "Nokia"; $config['os'][$os]['icon'] = "optical"; $config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.7483.1.3.1.6"; $config['os'][$os]['sysDescr'][] = "/^Nokia 1830 PSS/"; $config['os'][$os]['mibs'][] = "TROPIC-SYSTEM-MIB"; In addition, I have created the following two files, as I understood it in the instructions of Observium. /opt/observium/includes/definitions/os/nokia.inc.php $os = "nokia-xwdm"; $config['os'][$os]['mibs'][] = "TROPIC-SYSTEM-MIB"; /opt/observium/includes/definitions/mibs/nokia.inc.php $mib = 'TROPIC-SYSTEM-MIB'; $config['mibs'][$mib]['enable'] = 1; $config['mibs'][$mib]['mib_dir'] = 'nokia'; $config['mibs'][$mib]['descr'] = 'The system MIB for Nokia network elements.'; Unfortunately this is not successful and I am going in circles, can someone please give me an example how I can do this correctly so that Observium either always considers all MIB files cleanly, or I explicitly respectively from the beginning cleanly correctly discovered without me having to make this assignment for the OS in the Observium configuration file. Best regards Alisha

3 3

Observium map not work after update
by Arnoldo Vidal Bravo 24 Feb '23

24 Feb '23

We do update Observium, from version 22.12 to 23.2. Now the devices not show icon in map. we have 484 devices what do not show icon in the map. We must reboot after update version? -- Saluda cordialmente

1 0

Ignore priority 7 syslog
by Lars Joergensen 23 Feb '23

23 Feb '23

Hi Some unfortunate soul enabled BGP debugging on a device and then forgot all about it. I'm now trying to delete 76 million records from the syslog database.. Is there a way to ignore syslog messages with priority 7 in the syslog import in Observium? It'll probably happen again someday. Lars ________________________________ Disclaimer: This e-mail, including any attachments, is for the intended recipient only. If you have received this e-mail by mistake please notify the sender immediately by return e-mail and delete this e-mail and any attachments, without opening the attachments, from your system. Access, disclosure, copying, distribution or reliance on any part of this e-mail by anyone else is prohibited. This e-mail is confidential and may be legally privileged. Chr. Hansen does not represent and/or warrant that the information sent and/or received by or with this e-mail is correct and does not accept any liability for damages related thereto. https://www.chr-hansen.com/en/legal-notice

3 3

Problems with observium 22.12.12421
by Arnoldo Vidal Bravo 21 Feb '23

21 Feb '23

Hi, We are using observium 22.12.12421(stable) over a centos 7 (php 7.0.33), but we have a something problems on tables or alerts. First: on device properties -> ports, the items (vlan and physical interfaces) are showit order by ifIndex not port name or description, screenshot a Aruba Procurve 2530 [image: image.png] Second: in same table, does not showing all ports. that mean on many devices does not show port 1 or other port, but in the summary of ports detail the same port are show correctly. this do not allow to enable notifications on the port. On referent to first issue (may be): some alerts warning about a port down, but really port down does not exist or other port is down. we must update version? -- Saluda cordialmente

1 0

Observium Crash by Discovery of a Device | Observium Community Edition 23.1.12493
by Alisha Manuela Stutz 20 Feb '23

20 Feb '23

Hi to all, I am currently trying to integrate a "Nokia 1830 PSS" device in our lab, but unfortunately the discovery process always stops with an error that I cannot currently decode. I have attached the complete discovery including the crash and hope someone can help me solve the problem. sysadmin@observiumtest:/opt/observium$ /opt/observium/discovery.php -h all ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Community Edition 23.1.12493 https://www.observium.org -- Database is up to date. ##### Starting discovery run at 2023-02-20 17:05:39 ##### ##### vade-wag-b1 [130] ##### +-------------+--------------------------------+ | OID | | +-------------+--------------------------------+ | sysDescr | Nokia 1830 PSS v14.0.2 SDH ADM | | sysObjectID | .1.3.6.1.4.1.7483.1.3.1.6 | +-------------+--------------------------------+ o OS Type generic o OS Group unix o SNMP Version v3 o Last discovery o Last duration seconds ##### Module Start: os ##### o Duration 0.0002s ##### Module Start: mibs ##### o MIBs discovered <empty> o Duration 1.0324s ##### Module Start: vrf ##### o Duration 0.0014s ##### Module Start: ports ##### o Caching OIDs ifDescr ifAlias ifName ifType ifOperStatus o Caching DB 163 ports o Discovering ports ................................................................................................................................................................... +-----------+-------------------------+-------------+---------+------------------+-------------+---------+ | ifIndex | ifDescr | ifName | ifAlias | ifType | Oper Status | Ignored | +-----------+-------------------------+-------------+---------+------------------+-------------+---------+ | 16843008 | Local Ethernet Port | 1/1/CIT | ... | ethernetCsmacd | down | no | | 16843264 | AUX Port | 1/1/AUX | ... | ethernetCsmacd | down | no | | 16843520 | ES1 Port | 1/1/ES1 | ... | ethernetCsmacd | down | no | | 16843776 | ES2 Port | 1/1/ES2 | ... | ethernetCsmacd | down | no | | 16908544 | AHPLG Signal Port | 1/2/SIG | ... | opticalTransport | up | no | | 16909056 | AHPLG DCM Port | 1/2/DCM | ... | opticalTransport | up | no | | 16909312 | AHPLG Line Port | 1/2/LINE | ... | opticalTransport | up | no | | 16909568 | AHPLG OSC Port | 1/2/OSC | ... | opticalTransport | up | no | | 16909824 | AHPLG CustLan Port | 1/2/CUSTLAN | ... | opticalTransport | down | no | | 16974080 | AHPHG Signal Port | 1/3/SIG | ... | opticalTransport | up | no | | 16974592 | AHPHG DCM Port | 1/3/DCM | ... | opticalTransport | up | no | | 16974848 | AHPHG Line Port | 1/3/LINE | ... | opticalTransport | up | no | | 16975104 | Unassigned Port | 1/3/OSC | ... | opticalTransport | down | no | | 16975360 | AHPHG CustLan Port | 1/3/CUSTLAN | ... | opticalTransport | down | no | | 17039616 | AHPLG Signal Port | 1/4/SIG | ... | opticalTransport | up | no | | 17040128 | AHPLG DCM Port | 1/4/DCM | ... | opticalTransport | up | no | | 17040384 | AHPLG Line Port | 1/4/LINE | ... | opticalTransport | up | no | | 17040640 | AHPLG OSC Port | 1/4/OSC | ... | opticalTransport | up | no | | 17040896 | AHPLG CustLan Port | 1/4/CUSTLAN | ... | opticalTransport | down | no | | 17432832 | SFC8 MUX Port | 1/10/OMD | ... | opticalTransport | up | no | | 17433088 | SFC8 Channel Port | 1/10/1471 | ... | opticalTransport | down | no | | 17433344 | SFC8 Channel Port | 1/10/1491 | ... | opticalTransport | down | no | | 17433600 | SFC8 Channel Port | 1/10/1511 | ... | opticalTransport | down | no | | 17433856 | SFC8 Channel Port | 1/10/1531 | ... | opticalTransport | down | no | | 17434112 | SFC8 Channel Port | 1/10/1551 | ... | opticalTransport | up | no | | 17434368 | SFC8 Channel Port | 1/10/1571 | ... | opticalTransport | down | no | | 17434624 | SFC8 Channel Port | 1/10/1591 | ... | opticalTransport | down | no | | 17434880 | SFC8 Channel Port | 1/10/1611 | ... | opticalTransport | down | no | | 17498368 | 11DPM8 SDH NW Port | 1/11/L1 | ... | opticalChannel | down | no | | 17498624 | 11DPM8 SDH NW Port | 1/11/L2 | ... | opticalChannel | up | no | | 17498880 | 11DPM8 SDH Client Port | 1/11/C1 | ... | opticalChannel | down | no | | 17499136 | Unassigned Port | 1/11/C2 | ... | opticalChannel | down | no | | 17499392 | 11DPM8 SDH Client Port | 1/11/C3 | ... | opticalChannel | down | no | | 17499648 | Unassigned Port | 1/11/C4 | ... | opticalChannel | down | no | | 17499904 | 11DPM8 SDH Client Port | 1/11/C5 | ... | opticalChannel | up | no | | 17500160 | 11DPM8 SDH Client Port | 1/11/C6 | ... | opticalChannel | down | no | | 17500416 | Unassigned Port | 1/11/C7 | ... | opticalChannel | down | no | | 17500672 | Unassigned Port | 1/11/C8 | ... | opticalChannel | down | no | | 17500928 | 11DPM8 SDH eVOA Port | 1/11/VA1 | ... | other | up | no | | 17501184 | Unassigned Port | 1/11/VA2 | ... | other | down | no | | 17694976 | S13X100R Line Port | 1/14/L1 | ... | opticalChannel | up | no | | 17695232 | Unassigned Port | 1/14/C1 | ... | opticalChannel | down | no | | 17695488 | Unassigned Port | 1/14/C2 | ... | opticalChannel | down | no | | 17695744 | Unassigned Port | 1/14/C3 | ... | opticalChannel | down | no | | 17696000 | Unassigned Port | 1/14/C4 | ... | opticalChannel | down | no | | 17696256 | Unassigned Port | 1/14/C5 | ... | opticalChannel | down | no | | 17696512 | Unassigned Port | 1/14/C6 | ... | opticalChannel | down | no | | 17696768 | Unassigned Port | 1/14/C7 | ... | opticalChannel | down | no | | 17697024 | Unassigned Port | 1/14/C8 | ... | opticalChannel | down | no | | 17697280 | Unassigned Port | 1/14/C9 | ... | opticalChannel | down | no | | 17697536 | Unassigned Port | 1/14/C10 | ... | opticalChannel | down | no | | 17697792 | Unassigned Port | 1/14/C21 | ... | opticalChannel | down | no | | 17698048 | Unassigned Port | 1/14/C31 | ... | opticalChannel | down | no | | 17698304 | S13X100R Client Port | 1/14/C32 | ... | fibreChannel | up | no | | 17698560 | Unassigned Port | 1/14/BP2N1 | ... | fibreChannel | down | no | | 17698816 | Unassigned Port | 1/14/BP2N3 | ... | fibreChannel | down | no | | 17891584 | 11QPA4 SDH NW Port | 1/17/L1 | ... | opticalChannel | up | no | | 17891840 | 11QPA4 SDH NW Port | 1/17/L2 | ... | opticalChannel | up | no | | 17892096 | 11QPA4 SDH NW Port | 1/17/L3 | ... | opticalChannel | up | no | | 17892352 | 11QPA4 SDH NW Port | 1/17/L4 | ... | opticalChannel | up | no | | 17892608 | 11QPA4 SDH Client Port | 1/17/C1 | ... | opticalChannel | up | no | | 17892864 | 11QPA4 SDH Client Port | 1/17/C2 | ... | opticalChannel | up | no | | 17893120 | 11QPA4 SDH Client Port | 1/17/C3 | ... | opticalChannel | up | no | | 17893376 | 11QPA4 SDH Client Port | 1/17/C4 | ... | opticalChannel | down | no | | 17893632 | 11QPA4 SDH eVOA Port | 1/17/VA1 | ... | other | up | no | | 17893888 | 11QPA4 SDH eVOA Port | 1/17/VA2 | ... | other | up | no | | 17894144 | 11QPA4 SDH eVOA Port | 1/17/VA3 | ... | other | up | no | | 17894400 | 11QPA4 SDH eVOA Port | 1/17/VA4 | ... | other | up | no | | 19398912 | DCN Ethernet Port | 1/40/OAMP | ... | ethernetCsmacd | up | no | | 19399168 | VOIP Port | 1/40/VOIP | ... | ethernetCsmacd | down | no | | 19399424 | E1 Port | 1/40/E1 | ... | ethernetCsmacd | down | no | | 19399680 | E2 Port | 1/40/E2 | ... | ethernetCsmacd | down | no | | 419496192 | SFD Channel Port | 25/1/9600 | ... | opticalTransport | down | no | | 419496448 | SFD Channel Port | 25/1/9590 | ... | opticalTransport | down | no | | 419496704 | SFD Channel Port | 25/1/9580 | ... | opticalTransport | down | no | | 419496960 | SFD Channel Port | 25/1/9570 | ... | opticalTransport | down | no | | 419497216 | SFD Channel Port | 25/1/9560 | ... | opticalTransport | down | no | | 419497472 | SFD Channel Port | 25/1/9550 | ... | opticalTransport | down | no | | 419497728 | SFD Channel Port | 25/1/9540 | ... | opticalTransport | down | no | | 419497984 | SFD Channel Port | 25/1/9530 | ... | opticalTransport | down | no | | 419498240 | SFD Channel Port | 25/1/9520 | ... | opticalTransport | down | no | | 419498496 | SFD Channel Port | 25/1/9510 | ... | opticalTransport | down | no | | 419498752 | SFD Channel Port | 25/1/9500 | ... | opticalTransport | down | no | | 419499008 | SFD Channel Port | 25/1/9490 | ... | opticalTransport | down | no | | 419499264 | SFD Channel Port | 25/1/9480 | ... | opticalTransport | down | no | | 419499520 | SFD Channel Port | 25/1/9470 | ... | opticalTransport | down | no | | 419499776 | SFD Channel Port | 25/1/9460 | ... | opticalTransport | down | no | | 419500032 | SFD Channel Port | 25/1/9450 | ... | opticalTransport | down | no | | 419500288 | SFD Channel Port | 25/1/9440 | ... | opticalTransport | down | no | | 419500544 | SFD Channel Port | 25/1/9430 | ... | opticalTransport | down | no | | 419500800 | SFD Channel Port | 25/1/9420 | ... | opticalTransport | down | no | | 419501056 | SFD Channel Port | 25/1/9410 | ... | opticalTransport | up | no | | 419501312 | SFD Channel Port | 25/1/9400 | ... | opticalTransport | down | no | | 419501568 | SFD Channel Port | 25/1/9390 | ... | opticalTransport | down | no | | 419501824 | SFD Channel Port | 25/1/9380 | ... | opticalTransport | down | no | | 419502080 | SFD Channel Port | 25/1/9370 | ... | opticalTransport | down | no | | 419502336 | SFD Channel Port | 25/1/9360 | ... | opticalTransport | down | no | | 419502592 | SFD Channel Port | 25/1/9350 | ... | opticalTransport | down | no | | 419502848 | SFD Channel Port | 25/1/9340 | ... | opticalTransport | down | no | | 419503104 | SFD Channel Port | 25/1/9330 | ... | opticalTransport | down | no | | 419503360 | SFD Channel Port | 25/1/9320 | ... | opticalTransport | down | no | | 419503616 | SFD Channel Port | 25/1/9310 | ... | opticalTransport | down | no | | 419503872 | SFD Channel Port | 25/1/9300 | ... | opticalTransport | down | no | | 419504128 | SFD Channel Port | 25/1/9290 | ... | opticalTransport | down | no | | 419504384 | SFD Channel Port | 25/1/9280 | ... | opticalTransport | down | no | | 419504640 | SFD Channel Port | 25/1/9270 | ... | opticalTransport | down | no | | 419504896 | SFD Channel Port | 25/1/9260 | ... | opticalTransport | down | no | | 419505152 | SFD Channel Port | 25/1/9250 | ... | opticalTransport | down | no | | 419505408 | SFD Channel Port | 25/1/9240 | ... | opticalTransport | down | no | | 419505664 | SFD Channel Port | 25/1/9230 | ... | opticalTransport | down | no | | 419505920 | SFD Channel Port | 25/1/9220 | ... | opticalTransport | down | no | | 419506176 | SFD Channel Port | 25/1/9210 | ... | opticalTransport | down | no | | 419506432 | SFD Channel Port | 25/1/9200 | ... | opticalTransport | down | no | | 419506688 | SFD Channel Port | 25/1/9190 | ... | opticalTransport | down | no | | 419506944 | SFD Channel Port | 25/1/9180 | ... | opticalTransport | down | no | | 419507200 | SFD Channel Port | 25/1/9170 | ... | opticalTransport | down | no | | 419507456 | SFD MUX Port | 25/1/OMD | ... | opticalTransport | up | no | | 436273408 | External DCM InOut Port | 26/1/DCM | ... | opticalTransport | up | no | | 453050624 | SFD Channel Port | 27/1/9600 | ... | opticalTransport | down | no | | 453050880 | SFD Channel Port | 27/1/9590 | ... | opticalTransport | down | no | | 453051136 | SFD Channel Port | 27/1/9580 | ... | opticalTransport | down | no | | 453051392 | SFD Channel Port | 27/1/9570 | ... | opticalTransport | down | no | | 453051648 | SFD Channel Port | 27/1/9560 | ... | opticalTransport | down | no | | 453051904 | SFD Channel Port | 27/1/9550 | ... | opticalTransport | down | no | | 453052160 | SFD Channel Port | 27/1/9540 | ... | opticalTransport | down | no | | 453052416 | SFD Channel Port | 27/1/9530 | ... | opticalTransport | down | no | | 453052672 | SFD Channel Port | 27/1/9520 | ... | opticalTransport | down | no | | 453052928 | SFD Channel Port | 27/1/9510 | ... | opticalTransport | down | no | | 453053184 | SFD Channel Port | 27/1/9500 | ... | opticalTransport | down | no | | 453053440 | SFD Channel Port | 27/1/9490 | ... | opticalTransport | down | no | | 453053696 | SFD Channel Port | 27/1/9480 | ... | opticalTransport | down | no | | 453053952 | SFD Channel Port | 27/1/9470 | ... | opticalTransport | down | no | | 453054208 | SFD Channel Port | 27/1/9460 | ... | opticalTransport | down | no | | 453054464 | SFD Channel Port | 27/1/9450 | ... | opticalTransport | down | no | | 453054720 | SFD Channel Port | 27/1/9440 | ... | opticalTransport | down | no | | 453054976 | SFD Channel Port | 27/1/9430 | ... | opticalTransport | up | no | | 453055232 | SFD Channel Port | 27/1/9420 | ... | opticalTransport | up | no | | 453055488 | SFD Channel Port | 27/1/9410 | ... | opticalTransport | up | no | | 453055744 | SFD Channel Port | 27/1/9400 | ... | opticalTransport | up | no | | 453056000 | SFD Channel Port | 27/1/9390 | ... | opticalTransport | down | no | | 453056256 | SFD Channel Port | 27/1/9380 | ... | opticalTransport | down | no | | 453056512 | SFD Channel Port | 27/1/9370 | ... | opticalTransport | down | no | | 453056768 | SFD Channel Port | 27/1/9360 | ... | opticalTransport | down | no | | 453057024 | SFD Channel Port | 27/1/9350 | ... | opticalTransport | down | no | | 453057280 | SFD Channel Port | 27/1/9340 | ... | opticalTransport | down | no | | 453057536 | SFD Channel Port | 27/1/9330 | ... | opticalTransport | down | no | | 453057792 | SFD Channel Port | 27/1/9320 | ... | opticalTransport | down | no | | 453058048 | SFD Channel Port | 27/1/9310 | ... | opticalTransport | down | no | | 453058304 | SFD Channel Port | 27/1/9300 | ... | opticalTransport | down | no | | 453058560 | SFD Channel Port | 27/1/9290 | ... | opticalTransport | down | no | | 453058816 | SFD Channel Port | 27/1/9280 | ... | opticalTransport | down | no | | 453059072 | SFD Channel Port | 27/1/9270 | ... | opticalTransport | down | no | | 453059328 | SFD Channel Port | 27/1/9260 | ... | opticalTransport | down | no | | 453059584 | SFD Channel Port | 27/1/9250 | ... | opticalTransport | down | no | | 453059840 | SFD Channel Port | 27/1/9240 | ... | opticalTransport | down | no | | 453060096 | SFD Channel Port | 27/1/9230 | ... | opticalTransport | down | no | | 453060352 | SFD Channel Port | 27/1/9220 | ... | opticalTransport | down | no | | 453060608 | SFD Channel Port | 27/1/9210 | ... | opticalTransport | down | no | | 453060864 | SFD Channel Port | 27/1/9200 | ... | opticalTransport | down | no | | 453061120 | SFD Channel Port | 27/1/9190 | ... | opticalTransport | down | no | | 453061376 | SFD Channel Port | 27/1/9180 | ... | opticalTransport | down | no | | 453061632 | SFD Channel Port | 27/1/9170 | ... | opticalTransport | down | no | | 453061888 | SFD MUX Port | 27/1/OMD | ... | opticalTransport | up | no | +-----------+-------------------------+-------------+---------+------------------+-------------+---------+ o Duration 1.8872s ##### Module Start: ports-stack ##### o Duration 0.0643s ##### Module Start: vlans ##### o Q-BRIDGE-MIB o Duration 0.0781s ##### Module Start: oids ##### o Duration 0.0007s ##### Module Start: ip-addresses ##### o IP-MIB PHP Fatal error: Uncaught Error: Failed opening required 'PEAR.php' (include_path='/opt/observium/libs/pear:/opt/observium/libs:.:/usr/share/php') in /opt/observium/libs/pear/Net/IPv4.php:24 Stack trace: #0 /opt/observium/includes/common.inc.php(104): include_once() #1 /opt/observium/includes/entities/ip-address.inc.php(233): observium_autoload() #2 /opt/observium/includes/entities/ip-address.inc.php(271): netmask2cidr() #3 /opt/observium/includes/entities/ip-address.inc.php(160): get_ip_prefix() #4 /opt/observium/includes/discovery/ip-addresses/ip-mib.inc.php(90): discover_add_ip_address() #5 /opt/observium/includes/include-dir-mib.inc.php(48): include('...') #6 /opt/observium/includes/discovery/ip-addresses.inc.php(29): include('...') #7 /opt/observium/includes/discovery/functions.inc.php(977): include('...') #8 /opt/observium/discovery.php(206): discover_device() #9 {main} thrown in /opt/observium/libs/pear/Net/IPv4.php on line 24 sysadmin@observiumtest:/opt/observium$ best regards Alisha

2 8

MariaDB
by Oscar Sánchez Mora 18 Feb '23

18 Feb '23

how can i upgrade MariaDB i have linux 16.04 Your currently installed MariaDB version 10.0.38 is older than the recommended minimum 10.2.7. [cid:image001.png@01D94110.D7DE90F0] [cid:image002.png@01D94110.D7DE90F0]

6 8

Re: MariaDB
by Paul Whitton 15 Feb '23

15 Feb '23

If u stay on top of Ubuntu lts releases you can directly upgrade the box from 16.04 to 18.04 to 20.04 to 22.04 with do-release-upgrade so observium would stay installed and should just work with the new packages, however I dont know if it will work with 16.04 to 18.04 currently as 16.04 is now so out of date. On 15 Feb 2023 21:09, Oscar Sánchez Mora via observium <observium(a)lists.observium.org> wrote: ** THIS MESSAGE ORIGINATED OUTSIDE LOUGHBOROUGH UNIVERSITY ** ** Be wary of links or attachments, especially if the email is unsolicited or you don't recognise the sender's email address. ** Thanks, the issue is that when updating ubuntu 16.04 to the latest version I think it is 22.10 will lose observium and I have to run the program all over again. -----Mensaje original----- De: Michael Lambert via observium <observium(a)lists.observium.org> Enviado el: miércoles, 15 de febrero de 2023 09:02 Para: observium(a)lists.observium.org CC: Michael Lambert <lambert(a)psc.edu> Asunto: [Observium] Re: MariaDB [Apologies if this is a duplicate. I may have had the wrong address for the list.] If you’re not in a position to upgrade the OS yet, this link might be helpful: https://us-east-2.protection.sophos.com?d=mariadb.com&u=aHR0cHM6Ly9tYXJpYWR… Michael > On 15 Feb 2023, at 09:48:06, Ahmed Rahal via observium <observium(a)omega.observium.org> wrote: > > Hi, > I am assuming that Linux 16.04 is Ubuntu 16.04. > If that's the case, you should upgrade the whole install as Ubuntu16.04 no longer receives updates besides security (ESM requires Ubuntu Advantage subscription, see https://us-east-2.protection.sophos.com?d=ubuntu.com&u=aHR0cHM6Ly91YnVudHUu…)<https://us-east-2.protection.sophos.com?d=ubuntu.com&u=aHR0cHM6Ly91YnVudHUu…>. > In any case, you should upgrade the server to something more recent, which brings a newer version of MariaDB. > > HTH, > Ahmed. > > Le mer. 15 févr. 2023, à 08 h 43, Oscar Sánchez Mora via observium <observium(a)lists.observium.org> a écrit : > how can i upgrade MariaDB i have linux 16.04 > > > > Your currently installed MariaDB version 10.0.38 is older than the recommended minimum 10.2.7. > > <image001.png> > > > > <image002.png> > > > > _______________________________________________ > observium mailing list -- observium(a)lists.observium.org To unsubscribe > send an email to observium-leave(a)lists.observium.org > > > -- > Ahmed Rahal > Administrateur de Systèmes / Systems Administrator > Videotron/Fibrenoire - > https://us-east-2.protection.sophos.com?d=fibrenoire.ca&u=d3d3LmZpYnJl > bm9pcmUuY2E=&p=m&i=NjMyZGM2MjkyMGY2ZTAxMjdiY2Q3NDJj&t=T2YrTDJLd01PMm9w > dExWZkpKKzFsOTI1UkFzVDJ4VWFQWmE2T1pURDlrOD0=&h=e6e4b357c8884455a5eb203 > 03b2f9b76&s=AVNPUEhUT0NFTkNSWVBUSVaOzYUnaqpIdvDtaMzyfhTGnAX500dhcZs0xY > klJwC1eQGLFNxdx0G86sjAFzyoPck > A: 612 Rue Saint-Jacques, Montréal, QC H3C 1E2 > ahmed.rahal(a)videotron.com > Twitter: @fibrenoire > _______________________________________________ > observium mailing list -- observium(a)lists.observium.org To unsubscribe > send an email to observium-leave(a)lists.observium.org _______________________________________________ observium mailing list -- observium(a)lists.observium.org To unsubscribe send an email to observium-leave(a)lists.observium.org _______________________________________________ observium mailing list -- observium(a)lists.observium.org To unsubscribe send an email to observium-leave(a)lists.observium.org

1 0

How to add custom OIDs into one graph
by Timothy Stoddard 07 Feb '23

07 Feb '23

I know how to make separate custom OIDs, but can someone tell me how to combine those separate graphs into one combined graph? Thanks, -- Tim

3 4

||Basic Query on Observium||
by SOC.HCL 05 Feb '23

05 Feb '23

Hi All Need your help to get the below query addressed:- 1. How to check the current version of Observium through CLI as unable to see it through GUI. [cid:image001.png@01D938E9.0E6229F0] 1. How to check which license version we are currently using for observium. We are getting below information under "About Observium" option. Observium Professional License Version 1.1 1. How to upgrade the observium from current to latest? Thanks & Regards, Nitin Garg Lead/Architect - Networks (Firewall, LAN-WAN, Citrix-LB) HCL Nordea | Infrastructure Service Delivery Visit me: HCL Technologies Ltd. - IOMC, Special Economic Zone, Infra Tower1, Sector 126, Noida - 201313, INDIA Mob: +91 9958933232 E-mail: nitin.garg(a)consult.nordea.com<mailto:nitin.garg@consult.nordea.com> Web: nordea.com Planned Leaves : None Nordea Bank Abp, Satamaradankatu 5, FI-00020 NORDEA, Finland, domicile Helsinki, Business ID 2858394-9 This e-mail may contain confidential information. If you receive this e-mail by mistake, please inform the sender, delete the e-mail and do not share or copy it. Confidential

2 2

Port Group aggregate graphs refresh
by Marian Rychtecky 04 Feb '23

04 Feb '23

Hi all, I have a question (or maybe a feature request). Can I automatically refresh aggregated graphs based on Port Group? Let's say I have a Port Group based on ifAlias regexp. I can manually create an aggregated graph of it - bits, broadcasts, or discards. Then use created graph in the dashboard. The problem is a number of items in Port Group are changing over time, and I need to refresh these aggregated graphs manually. That means performing these steps 1) Ports -> Groups -> <My group name> 2) Aggregate Graphs -> Bits 3) Click on graph -> Add to the Dashboard 4) Repeat for all Aggregated graphs (Bits, Broadcasts, Multicasts, Discards) 5) delete old Aggregated graphs from the dashboard 6) position newly added graphs (with the actual number of ports) It would be very handful to have a script refreshing aggregated graphs automatically. Thank you, Marian -- Marian Rychtecký mr(a)nix.cz Phone +420 724 397 441 NIX.CZ z.s.p.o. Americká 23, Praha 2 130 52 Czech Republic http://www.nix.cz

2 3

OSBRidge antennas..
by George Michalopoulos 01 Feb '23

01 Feb '23

hello all, i discovered Observium few days ago, i have to sleep some days.. :) as far as i go deeper, it seems like the ultimate tool to monitor a network.. thank you very much for your work! a simple question. i have 2 OSBridge wireless antennas, they have snmp, and as far as i saw, they have mibs, but they are not included in the distribution.. can i add them manually, or you can include them in a future release ? -- regards, George Michalopoulos born & raise @ Metron 6 (six) Metron6(a)gmail.com

2 2

Error "Creation Failed" when Adding Port Groups
by Justin Radke 01 Feb '23

01 Feb '23

Goal: Attempting to make “aggregate” graphs by calculating port bandwidth from multiple devices. For example, a graph that shows the total bandwidth of IP transit or IXP Peering ports that are not in LAG groups on Cisco gear. Problem Statement: When creating a “Group” of ports I get an error in red that says “Creation Failed: Unknown action requested.” Problem Description: 1. Click “Create New Group” in the GUI 2. Select Entity Type “Port” 3. Give group name of “TestGroup1” 4. Select “Device” from the dropdown, default to “in” and select a Cisco router in the dropdown that is already present and working in Observium 5. Click “Add rule” select “AND” choose “Port ifIndex” “equals” enter in the field the ifindex a. I’ve also tried adding just one or even multiple rules with “OR’s” results in this message b. I’ve also tried adding the port with “Port ID”, “Port ifDescr”, “Port ifName” and others all result in this failure message c. I’m getting the port_id, ifindex, ifName, etc from the “Data” tab when viewing a Port of the Cisco in Observium 6. Click the bottom right, green “Add Group” and receive the error message: “Creation Failed: Unknown action requested.” Can someone direct me to how to make such graphs? And/or explain what I might be doing wrong that I cannot create Port Groups? Observium Subscription License Version 1.3: Observium 22.12.12421 (21st December 2022) OS Linux 4.18.0-408.el8.x86_64 [amd64] (CentOS 8) Apache 2.4.37 (centos) OpenSSL/1.1.1k PHP 7.2.24 (OPcache: ENABLED) (Memory: 128MB) Python 3.6.8 (python3 not used as default python) MariaDB 10.3.28-MariaDB (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.8 RRDtool 1.7.0 Fping 4.2 (IPv4 and IPv6) -=JGR

5 10

Forwarding the eventlog to a syslog server
by Stuart Taoro-Ahsin 31 Jan '23

31 Jan '23

Hi All We have a compliance requirement to forward the observium event log to a separate syslog server or some sort of logstash. Is there any functionality in observium for this? My googlefu seems to be really weak with this query Kind regards, Stuart Taoro-ahsin GPG Fingerprint: 7D0A 3303 A851 5335 95F1 E051 96C1 4368 5763 17BD

2 1

Still cannot log onto the web console
by Matthew Cotter 30 Jan '23

30 Jan '23

Hi Adam, A long time ago, I sent an email saying I could not log onto the Observium website. It appears to be still working when I look at the log file which is HUGE, 1781351488 in size. I was looking at the housekeeping option but when I was poking around in the terminal, I see there is cron.daily, cron.weekly, cron.monthly. no cron.d How can I run this on the fly to clean up that file? I could not figure that out. my Linux is amateur at best. I can navigate around, and edit files, but no coding experience. Please help.. I have made many changes to our network and I need to ger this so we can log in and I need to update the devices. Thank you! Matt Matthew Cotter Network Administrator Boston Inc. dba Furniture & ApplianceMart | Ashley HomeStore 2404 W, Beltline Hwy Madison, WI 53713 (p) 608-277-7700 (e) Matt.Cotter(a)BostonFAM.com BostonFAM.com<http://www.BostonFAM.Com> | AshleyHomestores.com<https://www.ashleyfurniturehomestore.com> | furnitureappliancemart.com<https://www.furnitureappliancemart.com/> [FAM Stores] "Improving the quality of people's lives by making amazing rooms together!" Central Wisconsin Area - Marshfield | Rhinelander | Stevens Point | Wausau Fox Valley Area - Appleton | Green Bay | Oshkosh | Sheboygan Madison Area - Madison East | Madison West | Janesville Milwaukee Area - Greenfield | Kenosha | Pewaukee | Richfield All locations owned & operated by Boston Inc. This e-mail contains privileged and confidential information intended only for the use of Boston Inc. or one or more of its employees. If the reader of this e-mail is not the intended recipient, please be advised that any retention, dissemination, or copying of this e-mail is strictly prohibited and may result in legal action. If you have received this e-mail in error, please immediately notify the sender by e-mail and delete the original e-mail from your mailbox.

3 4

bind application cache graphics problem
by Rodrigo Gallina 27 Jan '23

27 Jan '23

Hello! My bind_cache graph has -nan values. It was normal before. RRD CMD[update /opt/observium/rrd/hostxyz/app-bind-4-cache-default.rrd N:9:1:::16205:85:1052:1594:45:9:1311::17355:2:::71:8::5:13:13:::::::363::1254::6184::1754::::::1307:4367::::::] RRD RUNTIME[0.0011s] RRD STDOUT[ERROR: /opt/observium/rrd/hostxyz/app-bind-4-cache-default.rrd: Function update_pdp_prep, case DST_GAUGE - Cannot convert '' to float] RRD_STATUS[FALSE] How can I fix this ?

2 4

Forigate with virtual interfaces only
by Marian Rychtecky 26 Jan '23

26 Jan '23

Hi all, I have a short question: Does each device's main "traffic graph" (aggregated traffic in the overview) only show physical interfaces? Today I installed FG-200F with all interfaces as LAG (LAN and WAN is the LAG interface of 2 physical interfaces). Unfortunately, I cannot see traffic from LAG interfaces counted in total traffic. The main graph looks like traffic is aggregated per physical interface only. Any solution for this, please? BTW - Fortigate is not showing physical interfaces when they are part of LAG. Thanks, Marian -- Marian Rychtecký mr(a)nix.cz Phone +420 724 397 441 NIX.CZ z.s.p.o. Americká 23, Praha 2 130 52 Czech Republic http://www.nix.cz

2 1

Syslog host matching with multiple devices and 1 public IP
by mp＠matt-parkinson.co.uk 25 Jan '23

25 Jan '23

Hi, We have recently started using the syslog part of Observium and for the most part it works well where we have multiple public IP's logs are coming from or for places where we have VPN's and can reach devices on their local IP's. We are running into a problem however when we have multiple devices pushing their syslog's to us over a WAN link and they come from the same public IP. We're using the %fromhost% variable in the configuration and all logs seem to end up with the first device that we have set in /etc/hosts to match the public IP. We've tried changing the %fromhost% to %hostname% instead thinking it would use the hostname within the log entry but unfortunately that didn't work either. I've had a look at the documentation on how to do manual matching but I don't think that would help here either as it's only going to match the public IP. Has anyone come up against this before and know if there is a way to resolve it or will I need to create VPN's to each of those sites so we can push the logs over their private IP's instead?

3 4

expired subscription renewing
by Ross [Eve IT] 21 Jan '23

21 Jan '23

Hello, We've got a couple of subscriptions for 2 instances of Observium, one of them has expired and I cannot renew it. I keep getting a Paddle error, page not found. Is there a way for me to renew an expired subscription? Thanks. Ross.

2 2

Values keep flapping
by Marian Rychtecky 21 Jan '23

21 Jan '23

Hi all, I'm wondering why a lot of our device's values keep flapping. It's outside of the discovery schedule. Therefore I guess it's something with SNMP timers. It happens on all devices randomly. Does anyone have similar issues? Thank you, Marian -- Marian Rychtecký mr(a)nix.cz Phone +420 724 397 441 NIX.CZ z.s.p.o. Americká 23, Praha 2 130 52 Czech Republic http://www.nix.cz

2 1

license upgrade
by Alex Rubenstein 20 Jan '23

20 Jan '23

We currently have a professional license and wish to upgrade to a enterprise license. Is there an upgrade method or do we lose the value of the unused pro license?

1 0

Re: observium Digest, Vol 150, Issue 10
by Luis Olavarrieta 18 Jan '23

18 Jan '23

I can setup a test / dev instance for iTop, please let me know how to proceed. Regards, Luis This email is confidential and / or may contain inside information. If you are not the addressee or authorized to receive your emails, you must NOT use, copy, disclose or take any action based on this email or any other information herein, please notify the sender immediately by reply this email and delete this email and its attachments.Privacy note a: www.wynnmex.com Este correo electrónico es confidencial y/o puede contener información privilegiada. Si usted no es su destinatario o no es alguna persona autorizada por éste para recibir sus correos electrónicos, NO deberá utilizar, copiar, relevelar o tomar ninguna acción basada en este correo o cualquier otra información incluida en el, favor de notificar al remitente de inmediato mediante el envío de este correo y borrar a continuación totalmente este correo y sus anexos. Consulta nuestro aviso de privacidad en:www.wynnmex.com El 17/01/23, 0:42, "observium-request(a)lists.observium.org <mailto:observium-request@lists.observium.org>" <observium-request(a)lists.observium.org <mailto:observium-request@lists.observium.org>> escribió: Send observium mailing list submissions to observium(a)lists.observium.org <mailto:observium@lists.observium.org> To subscribe or unsubscribe via email, send a message with subject or body 'help' to observium-request(a)lists.observium.org <mailto:observium-request@lists.observium.org> You can reach the person managing the list at observium-owner(a)lists.observium.org <mailto:observium-owner@lists.observium.org> When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: integration with iTop (Adam Armstrong) ---------------------------------------------------------------------- Message: 1 Date: Tue, 17 Jan 2023 06:37:32 +0000 From: Adam Armstrong <adama(a)observium.org <mailto:adama@observium.org>> Subject: [Observium] Re: integration with iTop To: Luis Olavarrieta via observium <observium(a)lists.observium.org <mailto:observium@lists.observium.org>> Message-ID: <cc48ef13-a6e0-2f31-680d-0324dd72a20e(a)observium.org <mailto:cc48ef13-a6e0-2f31-680d-0324dd72a20e@observium.org>> Content-Type: multipart/alternative; boundary="------------71B8AFA7D9F63BD4DE57E417" This would require someone to write a notification transport to create tickets on itop. Their API seems to be very... complex and overly generic. You seem to have to pass SQL statements to it to create tickets, which is something I've never seen before. https://www.itophub.io/wiki/page?id=2_3_0:advancedtopics:create_ticket <https://www.itophub.io/wiki/page?id=2_3_0:advancedtopics:create_ticket> If you're lucky Mike might be interested in adding support for this, but someone might need to provide him with an itop installation to test with. Adam. Luis Olavarrieta via observium wrote on 12/01/2023 18:36: > > iTop has a “native” integration to Nagios thru a plugin to create > tickets automatically, does anyone know if there is a way to integrate > it with observium? > > Thanks! > > signature_2307061704 <http://www.wynnmex.com/> <http://www.wynnmex.com/>> > > This email is confidential and / or may contain inside information. If > you are not the addressee or authorized to receive your emails, you > must NOT use, copy, disclose or take any action based on this email or > any other information herein, please notify the sender immediately by > reply this email and delete this email and its attachments.Privacy > note a: www.wynnmex.com > > Este correo electrónico es confidencial y/o puede contener información > privilegiada. Si usted no es su destinatario o no es alguna persona > autorizada por éste para recibir sus correos electrónicos, NO deberá > utilizar, copiar, relevelar o tomar ninguna acción basada en este > correo o cualquier otra información incluida en el, favor de notificar > al remitente de inmediato mediante el envío de este correo y borrar a > continuación totalmente este correo y sus anexos. Consulta nuestro > aviso de privacidad en:www.wynnmex.com > > > > _______________________________________________ > observium mailing list -- observium(a)lists.observium.org <mailto:observium@lists.observium.org> > To unsubscribe send an email to observium-leave(a)lists.observium.org <mailto:observium-leave@lists.observium.org> -- Sent from Postbox <https://www.postbox-inc.com/?utm_source=email&utm_medium=siglink&utm_campai…> <https://www.postbox-inc.com/?utm_source=email&utm_medium=siglink&ut…>

1 0

integration with iTop
by Luis Olavarrieta 18 Jan '23

18 Jan '23

iTop has a “native” integration to Nagios thru a plugin to create tickets automatically, does anyone know if there is a way to integrate it with observium? Thanks! This email is confidential and / or may contain inside information. If you are not the addressee or authorized to receive your emails, you must NOT use, copy, disclose or take any action based on this email or any other information herein, please notify the sender immediately by reply this email and delete this email and its attachments.Privacy note a: www.wynnmex.com Este correo electrónico es confidencial y/o puede contener información privilegiada. Si usted no es su destinatario o no es alguna persona autorizada por éste para recibir sus correos electrónicos, NO deberá utilizar, copiar, relevelar o tomar ninguna acción basada en este correo o cualquier otra información incluida en el, favor de notificar al remitente de inmediato mediante el envío de este correo y borrar a continuación totalmente este correo y sus anexos. Consulta nuestro aviso de privacidad en:www.wynnmex.com

5 6

How to setup 2FA
by Anthony Polselli 17 Jan '23

17 Jan '23

Is it possible to setup 2FA natively (not using RADIUS)? [cid:image001.png@01D926A4.359CC9A0] __________________________________________ Anthony Polselli Chief Technology Officer Natural Networks, Inc. 7047 Carroll Rd. San Diego, CA 92121 anthony(a)naturalnetworks.com<mailto:anthony@naturalnetworks.com> http://www.naturalnetworks.com<http://www.naturalnetworks.com/> (619) 222-3232, ext: 101 office [cid:image002.jpg@01D926A4.359CC9A0]

2 1

Understanding device availability graph
by Dale Chambers 17 Jan '23

17 Jan '23

Good Morning, I am dealing with IT who has no understanding about networks, they have looked at a particular graph on Observium being the device availability and blaming that the issue is the switch based on what they see on the graph. The availability is 100% however there are sections that are shown red. Could you tell me what the red gradings is supposed to represent please? [cid:image001.jpg@01D9265E.974A71C0] Many Thanks Dale CONFIDENTIALITY AND PRIVACY POLICY This communication is private and the information contained in this email and any attachments may be privileged, commercially sensitive, confidential, proprietary to NSSLGlobal Limited or otherwise legally exempt from disclosure. If you are not the intended recipient or have been sent this in error, you are prohibited from using, copying, relying upon, or disseminating the information, and the sender disclaims any liability for such unauthorised use. Further, if you are not the intended recipient, please notify the sender immediately and delete all copies of this message. In accordance with our email policy, emails sent or received may be monitored. Thank you. We have recently updated our Privacy Policy, which can be accessed at https://www.nsslglobal.com/uploads/documents/NSSLGlobal_Privacy_Policy.pdf We will hold and manage personal data that you provide us with in accordance with this Privacy Policy.

2 1

Ignore sensors on "shut / admin down" interfaces
by Peter Derissen 17 Jan '23

17 Jan '23

Goodmorning, Is there any way to ignore sensors on disabled interfaces? 2m 23s cr1.ah0001 xe-1/3/1 RX Power Dbm xe-1/3/1 RX Power under threshold: -33.99 dBm (< -15 dBm) 2m 34s pe2.gs0028 xe-0/0/1:3 RX Power Dbm xe-0/0/1:3 RX Power under threshold: -33.99 dBm (< -16.4 dBm) 2m 35s pe2.ud0031 xe-0/0/1:2 RX Power Dbm xe-0/0/1:2 RX Power under threshold: -30.46 dBm (< -16.4 dBm) 2m 49s ibr1.dieg0001 xe-0/0/0 RX Power Dbm xe-0/0/0 RX Power under threshold: -26.02 dBm (< -20 dBm) I added this line to config.php but no luck so far. $config['sensors']['port']['ignore_shutdown'] = TRUE; Met vriendelijke groet, Peter Derissen Eurofiber Nederland Oss & Data Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [cid:image001.png@01D92976.BE4A4B40]<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.eurof…> Volg ons op Twitter<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Ftwitter.c…> | Linkedin<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.linke…> | Facebook<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.faceb…> | Youtube<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.youtu…> Wilt u op de hoogte blijven van technische ontwikkelingen aan ons netwerk, nieuwe ICT ontwikkelingen en klantervaringen? Meld u dan aan voor onze maandelijkse nieuwsbrief<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmarketing…>. [cid:image002.jpg@01D92976.BE4A4B40]<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.eurof…> ******** IMPORTANT NOTICE ******** This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system. Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof. Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01. Eurofiber N.V. has its registered office at Belgicastraat 5 bus 7, 1930 Zaventem and is registered under national number 0435.204.851. Eurofiber France has its registered office at 21 Avenue de la Cr?ativit?, 59650 Villeneuve d'Ascq and is registered under national number FR 83.822.249.074.

1 0

Ignore sensors on "shut / admin down" interfaces
by Peter Derissen 16 Jan '23

16 Jan '23

Goodmorning, Is there any way to ignore sensors on disabled interfaces? 2m 23s cr1.ah0001 xe-1/3/1 RX Power Dbm xe-1/3/1 RX Power under threshold: -33.99 dBm (< -15 dBm) 2m 34s pe2.gs0028 xe-0/0/1:3 RX Power Dbm xe-0/0/1:3 RX Power under threshold: -33.99 dBm (< -16.4 dBm) 2m 35s pe2.ud0031 xe-0/0/1:2 RX Power Dbm xe-0/0/1:2 RX Power under threshold: -30.46 dBm (< -16.4 dBm) 2m 49s ibr1.dieg0001 xe-0/0/0 RX Power Dbm xe-0/0/0 RX Power under threshold: -26.02 dBm (< -20 dBm) I added this line to config.php but no luck so far. $config['sensors']['port']['ignore_shutdown'] = TRUE; Met vriendelijke groet, Peter Derissen Eurofiber Nederland Oss & Data Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [cid:image001.png@01D9299C.EC371490]<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.eurof…> Volg ons op Twitter<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Ftwitter.c…> | Linkedin<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.linke…> | Facebook<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.faceb…> | Youtube<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.youtu…> Wilt u op de hoogte blijven van technische ontwikkelingen aan ons netwerk, nieuwe ICT ontwikkelingen en klantervaringen? Meld u dan aan voor onze maandelijkse nieuwsbrief<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmarketing…>. [cid:image002.jpg@01D9299C.EC371490]<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.eurof…> ******** IMPORTANT NOTICE ******** This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system. Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof. Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01. Eurofiber N.V. has its registered office at Belgicastraat 5 bus 7, 1930 Zaventem and is registered under national number 0435.204.851. Eurofiber France has its registered office at 21 Avenue de la Cr?ativit?, 59650 Villeneuve d'Ascq and is registered under national number FR 83.822.249.074.

1 0

F5 BIG IP - Pools, pool members and virtual servers discovery failed
by محمد نوشاث علي 04 Jan '23

04 Jan '23

> > Hi, > > We are using observium CE 22.12.12447 (30th December 2022) > OS: Ubuntu 18.04 > > We added F5 BIG IP 15.1.5.1 Build 0.0.14 Point Release 1 (asm gtm ltm) BIG IP Virtual Edition to observium. > > observium not able to discover pools, pool members, virtual servers details and stats on F5 BIG IP device. Kindly help me how to discover the pools, pool members and virtual servers. > > We are doing POC for this product. > > while checking discovery logs, its only discover system F5-BIGIP-SYSTEM-MIB and not discover F5-BIGIP-LOCAL-MIBs. > > > Regards > Nowshath > >

2 2

The Alert checker sends messages if pooled get null for a port parameters
by Vasiliy Moroz 04 Jan '23

04 Jan '23

Hello Community, Was there anyone who had an issue and could give me advice on how to work around my case described in the attached file ? Briefly: I set an alert checker, it checks the port state "ifOperStatus equals down" wait delay time and sends me the message. The port's operational status is constantly down for a long time. Sometimes the checker get NULL for port parameters so as ifOperStatus is NULL the checker defines it is not equals to "down" and sends me "false" message "Clear" The next check time the checker gets real state ifOperStatus equals down and as Alert was cleared last time so checker creates a new alert and sends me notification. Every time the checker gets null I am getting Clear then Alert notification. If I could operate with the previous state at the checker condition rule I would be set to create an alert only if the previous state was "up" AND the state for now is "down". [image: image.png]

2 1

extending community edition
by Edvinas Kairys 02 Jan '23

02 Jan '23

Hello, Our company would like to extend current Observium subscription. I know there're client area where we can enter credit card details and buy it. But maybe there're possibility to get the invoice for the purchase ? After that it would be easier to make the payment. Thanks

1 0

Observium Community Edition 22.12 Release
by Adam Armstrong 30 Dec '22

30 Dec '22

Hi All, We've released Observium Community Edition 22.12 based on r12447. This release includes ~350 commits. https://docs.observium.org/updating/#upgrade-to-latest-major-release Thanks, Adam.

1 0

not detecting failed test on cyberpower ups
by Tony Guadagno 19 Dec '22

19 Dec '22

Hi, I noticed that one of my ups' has failed its selftest on 12/19...however...Observium is reporting a successful test (but from the previous week 12/12). [cid:image001.jpg@01D91381.3E32DD10] From the ups: [cid:image002.jpg@01D91381.3E32DD10] And [cid:image003.jpg@01D91381.3E32DD10] How can we tell if the issue is with the UPS not reporting properly, or Observium not recognizing? I have attached some snmp walks. Thanks Tony Guadagno O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> [cid:image001.jpg@01D84DD6.FC9912E0]

2 2

observium + ostiket webhook
by Arnoldo Vidal Bravo 05 Dec '22

05 Dec '22

hi I'm trying to integrate observium with osticket... to generate tickets when an alarm is triggered on observium. But to setup a webhook json, osticket requires a key. webhook old no works. tested with curl.. works. observium 22.10.12354 (rolling) -- Saluda cordialmente

1 0

New requirement ¿posibble?
by Arnoldo Vidal Bravo 03 Dec '22

03 Dec '22

Our team handles requests with a ticket system. When a device does not respond... an alert is sent by email... then when the device starts working again a new email is sent with the subject recovery. Now our boss needs a new ticket to be generated only when a device doesn't respond, not when it works again. ¿it is possible? -- Saluda cordialmente

5 4

Out Of Office
by thomas.page＠neutralityms.com 03 Dec '22

03 Dec '22

Hi I am away currently with limited access to my inbox. Your message will not be forwarded. I will be back in the office on the 5th December If you are experiencing a fault on a live service, please contact nsc(a)neutralityms.com <mailto:nsc@neutralityms.com> Any help with ongoing delivery - please contact projects(a)neutralityms.com <mailto:projects@neutralityms.com> Thanks Tom

1 0

Features available on device
by Arnoldo Vidal Bravo 02 Dec '22

02 Dec '22

Hellow We have some devices added to monitoring, but this devices aren't discovery as network device (showed as generic -> type other). We can solved this issue deleting the device and adding again. If.. we have not access to console of linux.. we can run a update to discovery?... device is online more 80 days. -- Saluda cordialmente

2 1

Managing BGP fortigate
by Toky ANDRIANASOLO 02 Dec '22

02 Dec '22

Hello, The routing protocol BGP is not managed by observium on one of our fortigate model (F800D), could you please advise on how to get that managed. Thanks and regards, Toky --

2 1

Group Email Alerts
by Luis Londoño 23 Nov '22

23 Nov '22

Is there a way to group email alerts so there is not an email alert for every sensor that might go down at the same time? For example multiple fans on a server might show as an alert if the device itself is not responding

4 12

Minimum OID view on Cisco CPE to be pollable by Observium?
by Adam Thompson 23 Nov '22

23 Nov '22

Hi, Short of trial-and-error, how can we find the minimum set of OIDs required for Observium to be willing to detect an older Cisco router (e.g. 8xx, 18xx) and add it, so that interfaces can be polled? I already know that if we enable access to ifTable only, Observium doesn't want to play ball and won't add the device. I don't mind reading the source if I have a clue what & where to look for, but I haven't yet found anything promising. Clues, please? -Adam Adam Thompson Consultant, Infrastructure Services [MERLIN] 100 - 135 Innovation Drive Winnipeg, MB R3T 6A8 (204) 977-6824 or 1-800-430-6404 (MB only) https://www.merlin.mb.ca<https://www.merlin.mb.ca/> [cid:image002.png@01D8FEA1.078201A0]Chat with me on Teams<https://teams.microsoft.com/l/chat/0/0?users=athompson@merlin.mb.ca>

1 0

Re: snmp view
by Mati 23 Nov '22

23 Nov '22

Hello, I have configured one of our routers only to allow SNMP access to .1.3.6.1.2.1.2 oid using the snmp-server view command, but Observium will not add the device. However, if an SNMP object name is used instead eg *cisco*, the device is successfully polled. Is there a way of just polling the above oid in Observium? Kind regards Mati

1 0

always show table footer
by Wiethoff, Helge 20 Nov '22

20 Nov '22

Hi, I noticed that the table footer is not shown if less than 100 objects are displayed. Can it be configured so that the number of objects is always displayed? I often filter by firmware version, etc. and it would be helpful to have the number displayed. Best regards Helge

3 3

SNMP returning too much data
by Timothy Stoddard 17 Nov '22

17 Nov '22

I am trying to graph the number of GPS satellites my receiver is seeing, however, what is returned via SNMP has more information than what I need. This is from the documentation. I just want to strip the first integer as the answer. For one satellite with vehicle number 16: 1,16,C,-158 <-- I need the "1" For six satellites: 6,12,C,-156,14,C,-155,8,T,-162,24,C,-158,18,C,161,6,C,-160 <-- I need the "6" Can Observium do this? Thanks, -- Tim

2 1

hide ports automagically?
by Alex Rubenstein 13 Nov '22

13 Nov '22

Is there a way to automatically enable "hide shutdown" of ports any time you view a collection of ports?

1 0

web console logon issue
by Matthew Cotter 12 Nov '22

12 Nov '22

Greetings, I recently ran into a problem with logging into the web portal for Observium. I enter the user name and password, and nothing happens, Has anyone run into this? I have run all updates and maintenance I could find on the support site with no luck. Thank you Matt Matthew Cotter Network Administrator Boston Inc. dba Furniture & ApplianceMart | Ashley HomeStore 2404 W, Beltline Hwy Madison, WI 53713 (p) 608-277-7700 (e) Matt.Cotter(a)BostonFAM.com BostonFAM.com<http://www.BostonFAM.Com> | AshleyHomestores.com<https://www.ashleyfurniturehomestore.com> | furnitureappliancemart.com<https://www.furnitureappliancemart.com/> [FAM Stores] "Improving the quality of people's lives by making amazing rooms together!" Central Wisconsin Area - Marshfield | Rhinelander | Stevens Point | Wausau Fox Valley Area - Appleton | Green Bay | Oshkosh Madison Area - Madison East | Madison West | Janesville Milwaukee Area - Greenfield | Kenosha | Pewaukee | Richfield All locations owned & operated by Boston Inc. This e-mail contains privileged and confidential information intended only for the use of Boston Inc. or one or more of its employees. If the reader of this e-mail is not the intended recipient, please be advised that any retention, dissemination, or copying of this e-mail is strictly prohibited and may result in legal action. If you have received this e-mail in error, please immediately notify the sender by e-mail and delete the original e-mail from your mailbox.

3 8

"reset limits" doesn't work with one switch
by Wiethoff, Helge 10 Nov '22

10 Nov '22

Hi everyone, I have a problem with the "reset limits" function: On a device with many sensors (305) I can't recalculate the limits using "reset limits" in the device-preferences. Normally a note with the message appears: "Reset limits for Current sensor foo"; they will be recalculated on the next discovery run." But with this device this message does not appear. Of course I don't know if it has to do with the number of sensors but it is the only device where the problem occurs. Can I reset the limit values directly via the database? Thanks! Helge

4 4

Rule not being ignored
by McGranahan, Jamen (VU) 07 Nov '22

07 Nov '22

One of our servers keeps reporting that its down and then back up a minute later. I've tried to ignore the alert within Observium but that only lasted for less than a day. I even put in a date to ignore the alert until 2026. That lasted for a couple of days. But we are once again getting bombarded with these alerts. I don't want to disable the alert since we have over 30 systems registered. Ideas or suggestions? Jamen McGranahan Associate Director of Library Technology & Digital Services Vanderbilt University Library

3 2

Lots of errors "Deadlock found when trying to get lock; try restarting transaction"
by Thomas Stather 07 Nov '22

07 Nov '22

Hi We are running Observium Professional r12071 OS: Ubuntu 18.04 LTS MySQL: 5.7.38-0ubuntu0.18.04.1 In our /opt/observium/logs/db log, we are seeing a lot of these messages (approx. every minute). --- [2022/07/26 09:23:54 +0200] poller.php(3889): Failed dbQuery (#1213 - Deadlock found when trying to get lock; try restarting transaction), Query: INSERT INTO `vlans_fdb` (`fdb_id`,`port_id`,`fdb_status`,`fdb_port`,`fdb_last_change`,`deleted`) VALUES ('2022403206','19917','learned','1','1658820234','0'),('2022403209','19917','learned','1','1658820234','0'),('2022374672','19917','learned','1','1658820234','0'),('2022406153','19917','learned','1','1658820234','0'),('2022438526','19917','learned','1','1658820234','0'),('2022403210','19917','learned','1','1658820234','0'),('2022403211','19917','learned','1','1658820234','0'),('2022424430','19917','learned','1','1658820234','0'),('2022389346','19917','learned','1','1658820234','0'),('2022417515','19917','learned','1','1658820234','0'),('2022403215','19917','learned','1','1658820234','0'),('2022424431','19917','learned','1','1658820234','0'),('2022374680','19917','learned','1','1658820234','0'),('2022428820','19917','learned','1','1658820234','0'),('2022417516','19917','learned','1','1658820234','0'),('2022626809','19917','learned','1','1658820234','0'),('2022403218','19917','learned','1','1658820234','0'),('2022013327','19917','learned','1','1658820234','0'),('2022440623','19917','learned','1','1658820234','0'),('2023195038','19917','learned','1','1658820234','0'),('2022417520','19917','learned','1','1658820234','0'),('2022417521','19917','learned','1','1658820234','0'),('2022417522','19917','learned','1','1658820234','0'),('2022417525','19917','learned','1','1658820234','0'),('2022389354','19917','learned','1','1658820234','0'),('2022634466','19917','learned','1','1658820234','0'),('2022389355','19917','learned','1','1658820234','0'),('2022374686','19917','learned','1','1658820234','0'),('2022318658','19917','learned','1','1658820234','0'),('2022403222','19917','learned','1','1658820234','0'),('2022389360','19917','learned','1','1658820234','0'),('2022334581','19917','learned','1','1658820234','0'),('2022318665','19917','learned','1','1658820234','0'),('2022535557','19917','learned','1','1658820234','0'),('2022633094','19917','learned','1','1658820234','0'),('2022403228','19917','learned','1','1658820234','0'),('2022507536','19917','learned','1','1658820234','0'),('2023391470','19917','learned','1','1658820234','0'),('2022440625','19917','learned','1','1658820234','0'),('2022442062','19917','learned','1','1658820234','0'),('2022318672','19917','learned','1','1658820234','0'),('2022352825','19917','learned','1','1658820234','0'),('2022448395','19917','learned','1','1658820234','0'),('1781846826','19917','learned','1','1658820234','0'),('2022440626','19917','learned','1','1658820234','0'),('2021364663','19917','learned','1','1658820234','0'),('2022621595','19917','learned','1','1658820234','0'),('2021996873','19917','learned','1','1658820234','0'),('1930092608','19917','learned','1','1658820234','0'),('2022403237','19917','learned','1','1658820234','0'),('2022389374','19917','learned','1','1658820234','0'),('2021923896','19917','learned','1','1658820234','0'),('2022406174','19917','learned','1','1658820234','0'),('2022281507','19917','learned','1','1658820234','0'),('2022370404','19917','learned','1','1658820234','0'),('2022132020','19917','learned','1','1658820234','0'),('2022370406','19917','learned','1','1658820234','0'),('2022403242','19917','learned','1','1658820234','0'),('2022442064','19917','learned','1','1658820234','0'),('2022160398','19917','learned','1','1658820234','0'),('2021963914','19917','learned','1','1658820234','0'),('2022370416','19917','learned','1','1658820234','0'),('2022370417','19917','learned','1','1658820234','0'),('2022428831','19917','learned','1','1658820234','0'),('2022352835','19917','learned','1','1658820234','0'),('2022417541','19917','learned','1','1658820234','0'),('2022403248','19917','learned','1','1658820234','0'),('2022406184','19917','learned','1','1658820234','0'),('2022403251','19917','learned','1','1658820234','0'),('2022403252','19917','learned','1','1658820234','0'),('2022248989','19917','learned','1','1658820234','0'),('2022220229','19917','learned','1','1658820234','0'),('2022438537','19917','learned','1','1658820234','0'),('2022417547','19917','learned','1','1658820234','0'),('2022403257','19917','learned','1','1658820234','0'),('2022403260','19917','learned','1','1658820234','0'),('2022403261','19917','learned','1','1658820234','0'),('2022403262','19917','learned','1','1658820234','0'),('2022403263','19917','learned','1','1658820234','0'),('2022403265','19917','learned','1','1658820234','0'),('2022374716','19917','learned','1','1658820234','0'),('2022344523','19917','learned','1','1658820234','0'),('2022403276','19917','learned','1','1658820234','0'),('2024336889','19917','learned','1','1658820234','0'),('2022036744','19917','learned','1','1658820234','0'),('2022352850','19917','learned','1','1658820234','0'),('2022463833','19917','learned','1','1658820234','0'),('2022389400','19917','learned','1','1658820234','0'),('2022535560','19917','learned','1','1658820234','0'),('2022406201','19917','learned','1','1658820234','0'),('2022403291','19917','learned','1','1658820234','0'),('2022374736','19917','learned','1','1658820234','0'),('2022295503','19917','learned','1','1658820234','0'),('2022295504','19917','learned','1','1658820234','0'),('2022885411','19917','learned','1','1658820234','0'),('2022417565','19917','learned','1','1658820234','0'),('2022403294','19917','learned','1','1658820234','0'),('2022389405','19917','learned','1','1658820234','0'),('2022403295','19917','learned','1','1658820234','0'),('2022352861','19917','learned','1','1658820234','0'),('2022389406','19917','learned','1','1658820234','0'),('2022403296','19917','learned','1','1658820234','0'),('2022220258','19917','learned','1','1658820234','0'),('2022403297','19917','learned','1','1658820234','0'),('2022318712','19917','learned','1','1658820234','0'),('2022185898','19917','learned','1','1658820234','0'),('2022417566','19917','learned','1','1658820234','0'),('2022403299','19917','learned','1','1658820234','0'),('2022431524','19917','learned','1','1658820234','0'),('2022318715','19917','learned','1','1658820234','0'),('2022403303','19917','learned','1','1658820234','0'),('2022389409','19917','learned','1','1658820234','0'),('2022406211','19917','learned','1','1658820234','0'),('2022056535','19917','learned','1','1658820234','0'),('2022389412','19917','learned','1','1658820234','0'),('2022417570','19917','learned','1','1658820234','0'),('2022443725','19917','learned','1','1658820234','0'),('2021925685','19917','learned','1','1658820234','0'),('2022440635','19917','learned','1','1658820234','0'),('2023222617','19917','learned','1','1658820234','0'),('2022428840','19917','learned','1','1658820234','0'),('2022403307','19917','learned','1','1658820234','0'),('2022406215','19917','learned','1','1658820234','0'),('2022458785','19917','learned','1','1658820234','0'),('2022406216','19917','learned','1','1658820234','0'),('2022449600','19917','learned','1','1658820234','0'),('2022445047','19917','learned','1','1658820234','0'),('2023938925','19917','learned','1','1658820234','0'),('2022389418','19917','learned','1','1658820234','0'),('2022451483','19917','learned','1','1658820234','0'),('2022417575','19917','learned','1','1658820234','0'),('2022440636','19917','learned','1','1658820234','0'),('2022370471','19917','learned','1','1658820234','0'),('2022417583','19917','learned','1','1658820234','0'),('2022464789','19917','learned','1','1658820234','0'),('2022287606','19917','learned','1','1658820234','0'),('2022352884','19917','learned','1','1658820234','0'),('2022424457','19917','learned','1','1658820234','0'),('2022417585','19917','learned','1','1658820234','0'),('2022424462','19917','learned','1','1658820234','0'),('2022403324','19917','learned','1','1658820234','0'),('2022406247','19917','learned','1','1658820234','0'),('2022117804','19917','learned','1','1658820234','0'),('2022464791','19917','learned','1','1658820234','0'),('2022403327','19917','learned','1','1658820234','0'),('2022406249','19917','learned','1','1658820234','0'),('2022403329','19917','learned','1','1658820234','0'),('2022448403','19917','learned','1','1658820234','0'),('2022417595','19917','learned','1','1658820234','0'),('2022403333','19917','learned','1','1658820234','0'),('2022445053','19917','learned','1','1658820234','0'),('2022389440','19917','learned','1','1658820234','0'),('2024143217','19917','learned','1','1658820234','0') ON DUPLICATE KEY UPDATE `fdb_id`=VALUES(`fdb_id`),`port_id`=VALUES(`port_id`),`fdb_status`=VALUES(`fdb_status`),`fdb_port`=VALUES(`fdb_port`),`fdb_last_change`=VALUES(`fdb_last_change`),`deleted`=VALUES(`deleted`) --- Does somebody have a clue how this can be fixed? Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561 Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an!

3 8

authentication method
by Arnoldo Vidal Bravo 03 Nov '22

03 Nov '22

Hi, We have a Central screen to show any alert, status and information, but we want migrate an LDAP authentication. On this screen we have a special user created to login into observium's web. How we config Observium to use LDAP (to persons) and mysql (to special user and backup)? -- Saluda cordialmente

3 3

mitel monitoring?
by Alex Rubenstein 26 Oct '22

26 Oct '22

I am looking to monitor a variety of Mitel telephony devices. I've added one and auto discovered it. I did note that the MIBs I could download from the device are precisely the same ones already located in /opt/observium/mibs/mitel When auto discovery occurs, there is no mention of anything Mitel in the device. Is there something I have to do to push observium to enable Mitel stuff?

2 2

Authenticate methods
by Arnoldo Vidal Bravo 26 Oct '22

26 Oct '22

hello, we are evaluating to integrate observium authentication with ldap. It works fine for us... how to access observium if the ldap service does not respond (any failure)? .what do we do if we can't modify config.ini to use some other method? -- Saluda cordialmente

1 0

Observium check out using SVN Update (svn update) Not working
by Gordon Cheng (gocheng) 24 Oct '22

24 Oct '22

Forwarding for my colleague who is helping to re-install our Observium. Attached please find the screen shot of the ‘about’ page. Please also help to add "Ravish Hegde (ravisheg)" ravisheg(a)cisco.com<mailto:ravisheg@cisco.com> to the list of this account so that he can email to support directly. Thanks. From: "Ravish Hegde (ravisheg)" <ravisheg(a)cisco.com> Date: Friday, October 21, 2022 at 1:33 AM To: "observium(a)observium.org" <observium(a)observium.org> Cc: "Gordon Cheng (gocheng)" <gocheng(a)cisco.com> Subject: Observium check out using SVN Update (svn update) Not working Hi, In our Observium (Subscription version) environment, I tried upgrading our environment using SVN update and this did not error out , but did not work looks like as Observium version is still showing below message when login : There is a newer revision of Observium available! Version 21.9.11575 (20th October 2022) is 11575 revisions ahead. I have checked .SVN folder existence inside Observium folder where it installed. How can I pull the latest version to ensure environment is up-to-date? Please note that I have used all the steps mentioned in : https://docs.observium.org/updating/ Could you help me to fix this ? Regards Ravish Hegde ENGINEERING LEADER ravisheg(a)cisco.com<mailto:ravisheg@cisco.com> Mob: +91 9008942897

2 1

changes to $config['frontpage']['custom_traffic']['ids'] ignored
by Eric W. Bates (he) 18 Oct '22

18 Oct '22

We replaced our edge routers over the weekend and I updated the list of port id's in $config['frontpage']['custom_traffic']['ids'] with the new ones from the new routers; however, the custom graph on the front page hasn't changed and still lists the old interfaces (on the now shut-down routers). What else do I need to do? Thanks. -- Clark 159a 508/289-3112

2 6

alert by amount of traffic
by Arnoldo Vidal Bravo 15 Oct '22

15 Oct '22

Hi, We have a observium 22.1.11868. how we can have an alert by amount of traffic in a subinterface?. Explanation, on the interface we have an ISP provider, but there 2 subinterfaces, national traffic and international traffic. -- Saluda cordialmente

3 9

Message alerts
by Arnoldo Vidal Bravo 14 Oct '22

14 Oct '22

The observium team guided me to find an error when creating an alert. For the notifications sent by email to show the description or name in an interface, not port_label.... do we have to apply a template to the notifications? explain [image: image.png] -- Saluda cordialmente

1 0

Re: observium Digest, Vol 147, Issue 14
by Ryan, Spencer J. 14 Oct '22

14 Oct '22

Yes. The issue is the subinterfaces do not show up as Ethernet (ethernetCsmacd) Click on one of the subinterfaces, click the “Data” button on the right hand side, and see what the “ifType” is on this device, here’s an Arista for example: [cid:image001.png@01D8DFC3.B46B3050] Whatever that ifType is, add that as an “or” for ifType selection criteria. ________________________________ Spencer J. Ryan| Manager, Technology and Infrastructure Miller Canfield T +1.313.496.7979 | F +1.313.496.7500 ________________________________ From: Arnoldo Vidal Bravo <arnoldo.vidal(a)pucv.cl> Sent: Friday, October 14, 2022 11:09 AM To: Ryan, Spencer J. <Ryan(a)millercanfield.com> Subject: Re: [Observium] Re: observium Digest, Vol 147, Issue 14 Caution: This is an external email. Do not open attachments or click links from unknown or unexpected emails. this? [cid:image002.png@01D8DFC3.B46B3050] El vie, 14 oct 2022 a las 11:51, Ryan, Spencer J. (<Ryan(a)millercanfield.com<mailto:Ryan@millercanfield.com>>) escribió: The fact that they’re showing up in the screen shot you provided means Observium knows about them (and we can see traffic in the graphs) You are building your alert’s wrong if it’s not catching the sub interfaces. Share the alert definitions and we can try and help adjust them. ________________________________ Spencer J. Ryan| Manager, Technology and Infrastructure Miller Canfield T +1.313.496.7979 | F +1.313.496.7500 ________________________________ From: Arnoldo Vidal Bravo via observium <observium(a)lists.observium.org<mailto:observium@lists.observium.org>> Sent: Friday, October 14, 2022 10:43 AM To: Observium <observium(a)lists.observium.org<mailto:observium@lists.observium.org>> Cc: Arnoldo Vidal Bravo <arnoldo.vidal(a)pucv.cl<mailto:arnoldo.vidal@pucv.cl>> Subject: [Observium] Re: observium Digest, Vol 147, Issue 14 Caution: This is an external email. Do not open attachments or click links from unknown or unexpected emails. With any specific command? El vie, 14 oct 2022 a las 11:26, Luis Olavarrieta via observium (<observium(a)lists.observium.org<mailto:observium@lists.observium.org>>) escribió: Check out how the mibs respond to the request. Observium will only publish (doestn matter if is physical or logical) any interface posted thru the result of "IF-MIB" <http://www.wynnmex.com/> This email is confidential and / or may contain inside information. If you are not the addressee or authorized to receive your emails, you must NOT use, copy, disclose or take any action based on this email or any other information herein, please notify the sender immediately by reply this email and delete this email and its attachments.Privacy note a: www.wynnmex.com<http://www.wynnmex.com> Este correo electrónico es confidencial y/o puede contener información privilegiada. Si usted no es su destinatario o no es alguna persona autorizada por éste para recibir sus correos electrónicos, NO deberá utilizar, copiar, relevelar o tomar ninguna acción basada en este correo o cualquier otra información incluida en el, favor de notificar al remitente de inmediato mediante el envío de este correo y borrar a continuación totalmente este correo y sus anexos. Consulta nuestro aviso de privacidad en:www.wynnmex.com<http://www.wynnmex.com> El 14/10/22, 7:57, "observium-request(a)lists.observium.org<mailto:observium-request@lists.observium.org> <mailto:observium-request@lists.observium.org<mailto:observium-request@lists.observium.org>>" <observium-request(a)lists.observium.org<mailto:observium-request@lists.observium.org> <mailto:observium-request@lists.observium.org<mailto:observium-request@lists.observium.org>>> escribió: Send observium mailing list submissions to observium(a)lists.observium.org<mailto:observium@lists.observium.org> <mailto:observium@lists.observium.org<mailto:observium@lists.observium.org>> To subscribe or unsubscribe via email, send a message with subject or body 'help' to observium-request(a)lists.observium.org<mailto:observium-request@lists.observium.org> <mailto:observium-request@lists.observium.org<mailto:observium-request@lists.observium.org>> You can reach the person managing the list at observium-owner(a)lists.observium.org<mailto:observium-owner@lists.observium.org> <mailto:observium-owner@lists.observium.org<mailto:observium-owner@lists.observium.org>> When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: alert by amount of traffic (Arnoldo Vidal Bravo) ---------------------------------------------------------------------- Message: 1 Date: Fri, 14 Oct 2022 09:55:17 -0300 From: Arnoldo Vidal Bravo <arnoldo.vidal(a)pucv.cl<mailto:arnoldo.vidal@pucv.cl> <mailto:arnoldo.vidal@pucv.cl<mailto:arnoldo.vidal@pucv.cl>>> Subject: [Observium] Re: alert by amount of traffic To: Observium <observium(a)lists.observium.org<mailto:observium@lists.observium.org> <mailto:observium@lists.observium.org<mailto:observium@lists.observium.org>>> Message-ID: <CAGHkLJwm0Uo87Fj+Vy45kxjcfSqJ47iOjis8G0JCTxqNBA4Q5A(a)mail.gmail.com<mailto:CAGHkLJwm0Uo87Fj%2BVy45kxjcfSqJ47iOjis8G0JCTxqNBA4Q5A@mail.gmail.com> <mailto:CAGHkLJwm0Uo87Fj+Vy45kxjcfSqJ47iOjis8G0JCTxqNBA4Q5A@mail.gmail.com<mailto:CAGHkLJwm0Uo87Fj%2BVy45kxjcfSqJ47iOjis8G0JCTxqNBA4Q5A@mail.gmail.com>>> Content-Type: multipart/related; boundary="000000000000064b5e05eafe24bb" it is not possible to create traffic alert on a subinterface. They only work with physical interfaces... we already tried El vie, 14 oct 2022 a las 9:50, Adam Armstrong via observium (< observium(a)lists.observium.org<mailto:observium@lists.observium.org> <mailto:observium@lists.observium.org<mailto:observium@lists.observium.org>>>) escribió: > I still don't really understand the problem. > > In Observium there's no difference between an "interface" and a > "subinterface". > > They're all just entries in IF-MIB. > > adam. > > Arnoldo Vidal Bravo via observium wrote on 2022-10-14 12:38: > > attached graphical explanation > > [image: image.png] > > El jue, 13 oct 2022 a las 20:24, Adam Armstrong via observium (< > observium(a)lists.observium.org<mailto:observium@lists.observium.org> <mailto:observium@lists.observium.org<mailto:observium@lists.observium.org>>>) escribió: > >> I’m not sure what you mean by subinterface. >> >> >> >> If it exists in Observium as a port, you can alert on it. If it doesn’t, >> you can’t. >> >> >> >> Adam. >> >> >> >> *From:* Arnoldo Vidal Bravo via observium <observium(a)lists.observium.org<mailto:observium@lists.observium.org> <mailto:observium@lists.observium.org<mailto:observium@lists.observium.org>>> >> >> *Sent:* 13 October 2022 21:20 >> *To:* Observium <observium(a)lists.observium.org<mailto:observium@lists.observium.org> <mailto:observium@lists.observium.org<mailto:observium@lists.observium.org>>> >> *Cc:* Arnoldo Vidal Bravo <arnoldo.vidal(a)pucv.cl<mailto:arnoldo.vidal@pucv.cl> <mailto:arnoldo.vidal@pucv.cl<mailto:arnoldo.vidal@pucv.cl>>> >> *Subject:* [Observium] Re: alert by amount of traffic >> >> >> >> Yes, it works same a common interface. >> in the examples available, we can setup an alert when RX bps is >> greater 90% on any interface... works fine , but we can't do same thing on >> a subinterface. >> >> >> >> >> >> El jue, 13 oct 2022 a las 15:20, Adam Armstrong via observium (< >> observium(a)lists.observium.org<mailto:observium@lists.observium.org> <mailto:observium@lists.observium.org<mailto:observium@lists.observium.org>>>) escribió: >> >> Do the subinterfaces have traffic counters? >> >> >> >> A traffic alert is fairly trivial, there are examples in the docs, I >> think. >> >> >> >> You can’t alert on “x traffic in x hours/days/weeks”, but you can alert >> on “x bps”. >> >> >> >> Adam. >> >> >> >> *From:* Arnoldo Vidal Bravo via observium <observium(a)lists.observium.org<mailto:observium@lists.observium.org> <mailto:observium@lists.observium.org<mailto:observium@lists.observium.org>>> >> >> *Sent:* 13 October 2022 12:51 >> *To:* Observium <observium(a)observium.org<mailto:observium@observium.org> <mailto:observium@observium.org<mailto:observium@observium.org>>> >> *Cc:* Arnoldo Vidal Bravo <arnoldo.vidal(a)pucv.cl<mailto:arnoldo.vidal@pucv.cl> <mailto:arnoldo.vidal@pucv.cl<mailto:arnoldo.vidal@pucv.cl>>> >> *Subject:* [Observium] alert by amount of traffic >> >> >> >> >> Hi, >> >> We have a observium 22.1.11868. how we can have an alert by amount of >> traffic in a subinterface?. >> >> Explanation, on the interface we have an ISP provider, but there 2 >> subinterfaces, national traffic and international traffic. >> >> -- >> >> Saluda cordialmente >> >> [image: Image removed by sender.] >> >> >> >> _______________________________________________ >> observium mailing list -- observium(a)lists.observium.org<mailto:observium@lists.observium.org> <mailto:observium@lists.observium.org<mailto:observium@lists.observium.org>> >> To unsubscribe send an email to observium-leave(a)lists.observium.org<mailto:observium-leave@lists.observium.org> <mailto:observium-leave@lists.observium.org<mailto:observium-leave@lists.observium.org>> >> >> >> >> >> -- >> >> Saluda cordialmente >> >> [image: Image removed by sender.] >> >> >> _______________________________________________ >> observium mailing list -- observium(a)lists.observium.org<mailto:observium@lists.observium.org> <mailto:observium@lists.observium.org<mailto:observium@lists.observium.org>> >> To unsubscribe send an email to observium-leave(a)lists.observium.org<mailto:observium-leave@lists.observium.org> <mailto:observium-leave@lists.observium.org<mailto:observium-leave@lists.observium.org>> >> > > > -- > > Saluda cordialmente > > > > > > > _______________________________________________ > observium mailing list -- observium(a)lists.observium.org<mailto:observium@lists.observium.org> <mailto:observium@lists.observium.org<mailto:observium@lists.observium.org>> > To unsubscribe send an email to observium-leave(a)lists.observium.org<mailto:observium-leave@lists.observium.org> <mailto:observium-leave@lists.observium.org<mailto:observium-leave@lists.observium.org>> > > > -- > Sent from Postbox > <https://www.postbox-inc.com/?utm_source=email&utm_medium=siglink&utm_campai…> <https://www.postbox-inc.com/?utm_source=email&utm_medium=siglink&ut…> > _______________________________________________ > observium mailing list -- observium(a)lists.observium.org<mailto:observium@lists.observium.org> <mailto:observium@lists.observium.org<mailto:observium@lists.observium.org>> > To unsubscribe send an email to observium-leave(a)lists.observium.org<mailto:observium-leave@lists.observium.org> <mailto:observium-leave@lists.observium.org<mailto:observium-leave@lists.observium.org>> > -- Saluda cordialmente -------------- next part -------------- A message part incompatible with plain text digests has been removed ... Name: not available Type: text/html Size: 8549 bytes Desc: not available -------------- next part -------------- A message part incompatible with plain text digests has been removed ... Name: image.png Type: image/png Size: 48525 bytes Desc: not available -------------- next part -------------- A message part incompatible with plain text digests has been removed ... Name: image.jpg Type: image/jpeg Size: 1555 bytes Desc: not available ------------------------------ Subject: Digest Footer _______________________________________________ observium mailing list -- observium(a)lists.observium.org<mailto:observium@lists.observium.org> <mailto:observium@lists.observium.org<mailto:observium@lists.observium.org>> To unsubscribe send an email to observium-leave(a)lists.observium.org<mailto:observium-leave@lists.observium.org> <mailto:observium-leave@lists.observium.org<mailto:observium-leave@lists.observium.org>> ------------------------------ End of observium Digest, Vol 147, Issue 14 ****************************************** _______________________________________________ observium mailing list -- observium(a)lists.observium.org<mailto:observium@lists.observium.org> To unsubscribe send an email to observium-leave(a)lists.observium.org<mailto:observium-leave@lists.observium.org> -- Saluda cordialmente [https://ci3.googleusercontent.com/mail-sig/AIorK4zSp_IGIjRFyFrjo99eHvCZnmKt…] You have received a message from the law firm Miller Canfield. The information contained in or attached to this electronic mail may be privileged and/or confidential. If you received this transmission and are not the intended recipient, you should not read this message and are hereby notified that any dissemination, distribution or copying of this communication and/or its attachments is strictly prohibited. If you have received this communication in error or are not sure whether it is privileged, please immediately notify us by return e-mail and delete or destroy the original and any copies, electronic, paper or otherwise, that you may have of this communication and any attachments. -- Saluda cordialmente [https://ci3.googleusercontent.com/mail-sig/AIorK4zSp_IGIjRFyFrjo99eHvCZnmKt…]

1 0

Re: observium Digest, Vol 147, Issue 14
by Luis Olavarrieta 14 Oct '22

14 Oct '22

Check out how the mibs respond to the request. Observium will only publish (doestn matter if is physical or logical) any interface posted thru the result of "IF-MIB" <http://www.wynnmex.com/> This email is confidential and / or may contain inside information. If you are not the addressee or authorized to receive your emails, you must NOT use, copy, disclose or take any action based on this email or any other information herein, please notify the sender immediately by reply this email and delete this email and its attachments.Privacy note a: www.wynnmex.com Este correo electrónico es confidencial y/o puede contener información privilegiada. Si usted no es su destinatario o no es alguna persona autorizada por éste para recibir sus correos electrónicos, NO deberá utilizar, copiar, relevelar o tomar ninguna acción basada en este correo o cualquier otra información incluida en el, favor de notificar al remitente de inmediato mediante el envío de este correo y borrar a continuación totalmente este correo y sus anexos. Consulta nuestro aviso de privacidad en:www.wynnmex.com El 14/10/22, 7:57, "observium-request(a)lists.observium.org <mailto:observium-request@lists.observium.org>" <observium-request(a)lists.observium.org <mailto:observium-request@lists.observium.org>> escribió: Send observium mailing list submissions to observium(a)lists.observium.org <mailto:observium@lists.observium.org> To subscribe or unsubscribe via email, send a message with subject or body 'help' to observium-request(a)lists.observium.org <mailto:observium-request@lists.observium.org> You can reach the person managing the list at observium-owner(a)lists.observium.org <mailto:observium-owner@lists.observium.org> When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: alert by amount of traffic (Arnoldo Vidal Bravo) ---------------------------------------------------------------------- Message: 1 Date: Fri, 14 Oct 2022 09:55:17 -0300 From: Arnoldo Vidal Bravo <arnoldo.vidal(a)pucv.cl <mailto:arnoldo.vidal@pucv.cl>> Subject: [Observium] Re: alert by amount of traffic To: Observium <observium(a)lists.observium.org <mailto:observium@lists.observium.org>> Message-ID: <CAGHkLJwm0Uo87Fj+Vy45kxjcfSqJ47iOjis8G0JCTxqNBA4Q5A(a)mail.gmail.com <mailto:CAGHkLJwm0Uo87Fj+Vy45kxjcfSqJ47iOjis8G0JCTxqNBA4Q5A@mail.gmail.com>> Content-Type: multipart/related; boundary="000000000000064b5e05eafe24bb" it is not possible to create traffic alert on a subinterface. They only work with physical interfaces... we already tried El vie, 14 oct 2022 a las 9:50, Adam Armstrong via observium (< observium(a)lists.observium.org <mailto:observium@lists.observium.org>>) escribió: > I still don't really understand the problem. > > In Observium there's no difference between an "interface" and a > "subinterface". > > They're all just entries in IF-MIB. > > adam. > > Arnoldo Vidal Bravo via observium wrote on 2022-10-14 12:38: > > attached graphical explanation > > [image: image.png] > > El jue, 13 oct 2022 a las 20:24, Adam Armstrong via observium (< > observium(a)lists.observium.org <mailto:observium@lists.observium.org>>) escribió: > >> I’m not sure what you mean by subinterface. >> >> >> >> If it exists in Observium as a port, you can alert on it. If it doesn’t, >> you can’t. >> >> >> >> Adam. >> >> >> >> *From:* Arnoldo Vidal Bravo via observium <observium(a)lists.observium.org <mailto:observium@lists.observium.org>> >> >> *Sent:* 13 October 2022 21:20 >> *To:* Observium <observium(a)lists.observium.org <mailto:observium@lists.observium.org>> >> *Cc:* Arnoldo Vidal Bravo <arnoldo.vidal(a)pucv.cl <mailto:arnoldo.vidal@pucv.cl>> >> *Subject:* [Observium] Re: alert by amount of traffic >> >> >> >> Yes, it works same a common interface. >> in the examples available, we can setup an alert when RX bps is >> greater 90% on any interface... works fine , but we can't do same thing on >> a subinterface. >> >> >> >> >> >> El jue, 13 oct 2022 a las 15:20, Adam Armstrong via observium (< >> observium(a)lists.observium.org <mailto:observium@lists.observium.org>>) escribió: >> >> Do the subinterfaces have traffic counters? >> >> >> >> A traffic alert is fairly trivial, there are examples in the docs, I >> think. >> >> >> >> You can’t alert on “x traffic in x hours/days/weeks”, but you can alert >> on “x bps”. >> >> >> >> Adam. >> >> >> >> *From:* Arnoldo Vidal Bravo via observium <observium(a)lists.observium.org <mailto:observium@lists.observium.org>> >> >> *Sent:* 13 October 2022 12:51 >> *To:* Observium <observium(a)observium.org <mailto:observium@observium.org>> >> *Cc:* Arnoldo Vidal Bravo <arnoldo.vidal(a)pucv.cl <mailto:arnoldo.vidal@pucv.cl>> >> *Subject:* [Observium] alert by amount of traffic >> >> >> >> >> Hi, >> >> We have a observium 22.1.11868. how we can have an alert by amount of >> traffic in a subinterface?. >> >> Explanation, on the interface we have an ISP provider, but there 2 >> subinterfaces, national traffic and international traffic. >> >> -- >> >> Saluda cordialmente >> >> [image: Image removed by sender.] >> >> >> >> _______________________________________________ >> observium mailing list -- observium(a)lists.observium.org <mailto:observium@lists.observium.org> >> To unsubscribe send an email to observium-leave(a)lists.observium.org <mailto:observium-leave@lists.observium.org> >> >> >> >> >> -- >> >> Saluda cordialmente >> >> [image: Image removed by sender.] >> >> >> _______________________________________________ >> observium mailing list -- observium(a)lists.observium.org <mailto:observium@lists.observium.org> >> To unsubscribe send an email to observium-leave(a)lists.observium.org <mailto:observium-leave@lists.observium.org> >> > > > -- > > Saluda cordialmente > > > > > > > _______________________________________________ > observium mailing list -- observium(a)lists.observium.org <mailto:observium@lists.observium.org> > To unsubscribe send an email to observium-leave(a)lists.observium.org <mailto:observium-leave@lists.observium.org> > > > -- > Sent from Postbox > <https://www.postbox-inc.com/?utm_source=email&utm_medium=siglink&utm_campai…> <https://www.postbox-inc.com/?utm_source=email&utm_medium=siglink&ut…> > _______________________________________________ > observium mailing list -- observium(a)lists.observium.org <mailto:observium@lists.observium.org> > To unsubscribe send an email to observium-leave(a)lists.observium.org <mailto:observium-leave@lists.observium.org> > -- Saluda cordialmente

3 2

Same Subnet devices
by Arrigo 13 Oct '22

13 Oct '22

Hi All. Is there a way to disable same subnet devices shown in port list: Since we have lots of devices with identical LAN network, list on the right of the page can be very long (and useless, btw ...). Thanks, Arrigo.

5 12

Graph Gaps and Scaling questions
by Daniel Benson 11 Oct '22

11 Oct '22

list, I have been working all angles to scale my observium CE instance running well but seem to be failing. By failing I am referring to the classic gaps in graphs for all my devices. I am running on esxi with 16 cores @ 2.40GHz, 16G of ram, SSD SAS Raid and continue to have gaps. Most recently I have pushed sql to its own instance in hopes of working around potential IO issues but that didnt help. What I do see is that my ram use is very high, I am guessing from the discovery process twice a day. When my ram use is lower throughout the day, I have no gaps. I am monitoring 6000ports on 190 devices. Should I be using north of 16G of ram in my env? I am happy to add more but all my reading indicates that observium is not RAM intense. My last attempt will be to move the RRDs to a ram disk but my RRDs are almost 16G at this time which I am guessing is part of the problem. Maybe it is time to clean house. Any insight would be appreciated. db

4 3

APC UPS Monitoring
by Alex Rubenstein 11 Oct '22

11 Oct '22

One of the status indicators on APC UPS's is "Diagnostic Results." It is shown as: Diagnostics Results (last 2022-10-10) ok I am looking to set up an alert where if the last diag date is more than N days ago, alert me. But since the date is somehow wrapped into the status name, rather than the status result, I am not sure how to do this. Any pointers?

2 2

Re: HTTP/1.0 500 after upgrading to latest version 12324
by Gordon Cheng (gocheng) 10 Oct '22

10 Oct '22

More info below. We are seeing the following errors under “/opt/observium/logs/error_log”. Any suggestions? [Mon Oct 10 07:41:18.027297 2022] [php7:warn] [pid 3892] [client 171.68.241.10:52553] PHP Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0 [Mon Oct 10 07:41:18.027382 2022] [php7:error] [pid 3892] [client 171.68.241.10:52553] PHP Fatal error: Unknown: Failed opening required '/opt/observium/html/index.php' (include_path='.:/usr/share/pear:/usr/share/php') in Unknown on line 0 [Mon Oct 10 07:41:19.347309 2022] [php7:warn] [pid 3818] [client 10.0.103.96:56392] PHP Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0 [Mon Oct 10 07:41:19.347391 2022] [php7:error] [pid 3818] [client 10.0.103.96:56392] PHP Fatal error: Unknown: Failed opening required '/opt/observium/html/index.php' (include_path='.:/usr/share/pear:/usr/share/php') in Unknown on line 0 [Mon Oct 10 07:41:19.351707 2022] [php7:warn] [pid 3814] [client 10.0.103.96:56394] PHP Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0 [Mon Oct 10 07:41:19.351762 2022] [php7:error] [pid 3814] [client 10.0.103.96:56394] PHP Fatal error: Unknown: Failed opening required '/opt/observium/html/api/v0/index.php' (include_path='.:/usr/share/pear:/usr/share/php') in Unknown on line 0 [Mon Oct 10 07:41:19.872404 2022] [php7:warn] [pid 3815] [client 10.0.2.243:57194] PHP Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0 [Mon Oct 10 07:41:19.872475 2022] [php7:error] [pid 3815] [client 10.0.2.243:57194] PHP Fatal error: Unknown: Failed opening required '/opt/observium/html/index.php' (include_path='.:/usr/share/pear:/usr/share/php') in Unknown on line 0 Looks like it’s a permission issue in the /opt/observium/html folder where the site lives, but just not sure what they should be. Thanks. From: "Gordon Cheng (gocheng) via observium" <observium(a)lists.observium.org> Reply-To: Observium <observium(a)lists.observium.org> Date: Monday, October 10, 2022 at 8:13 AM To: Observium <observium(a)observium.org> Cc: "adama(a)observium.org" <adama(a)observium.org>, "Gordon Cheng (gocheng)" <gocheng(a)cisco.com> Subject: [Observium] HTTP/1.0 500 after upgrading to latest version 12324 Hello, We have just upgraded our subscription edition to the latest 12324 (from a pretty old version). But the GUI is not accessible anymore afterwards, with HTTP/1.0 500 errors. Restarting ‘httpd’ (showing ‘active (running)’) and reboot the server doesn’t help. Any suggestions how we can fix it or troubleshoot further? Thanks. - Gordon

2 1

HTTP/1.0 500 after upgrading to latest version 12324
by Gordon Cheng (gocheng) 10 Oct '22

10 Oct '22

Hello, We have just upgraded our subscription edition to the latest 12324 (from a pretty old version). But the GUI is not accessible anymore afterwards, with HTTP/1.0 500 errors. Restarting ‘httpd’ (showing ‘active (running)’) and reboot the server doesn’t help. Any suggestions how we can fix it or troubleshoot further? Thanks. - Gordon

1 0

Show port descriptions also on Ports -> Map view
by Thomas Stather 10 Oct '22

10 Oct '22

Hi We are running Observium Professional r12071 I noticed that if we set up a description for our network ports, these are shown on the views of the switch under Ports -> Basic Ports -> Details Ports -> Neighbours Is there a way to also show it on *Ports -> Map* for the local port (blue bubble) and the remote port (grey bubble)? Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Room: U1.509 Tel: +49 6221 486 628 Fax: +49 6221 486 561 Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an!

1 0

Weird results from stacked graph.
by David Milton 08 Oct '22

08 Oct '22

Hello, We have been seeing some results in our stacked graphs that do not appear to make sense. Initially we thought this was because the maximum values for the two values occurred at different points in time. That cannot be the whole issue because even if you take the sum of every pair of numbers the maximum aggregate must at least equal the maximum value of one of the two series. This graph shows the problem: How can we have a maximum value of 97.4M but an aggregate maximum of 55.7M? It seems that maximum aggregate should also at least be 97.4M. What’s happening here? Thanks, Dave.

2 4

Alerter frequency
by Alex Rubenstein 04 Oct '22

04 Oct '22

Greetings, I have been setting up Observium for a client for the last few months and I have been loving it. Amazingly flexible and reliable. I am quite pleased. I am running 22.8.12241, Subscription. I know that Observium does not support SNMP Traps and understand why. So, I have set up syslog on the services to push events and they are caught by Observium. This works fine. I have now also created syslog alerts and this works fine too. My issue is the delay from when the syslog comes to the server, and the alert goes out. I found this old mailing list entry: https://lists.observium.org/hyperkitty/list/observium@lists.observium.org/m… Adam's reply was: "We have to wait for a cron job to be run to send the alerts, because we can't do it in the syslog processing script. Iirc you can cron alerter.php to do it more frequently!" This is an acceptable solution to me, but I have a couple question: 1. Is there risk with how often this is run? If I cron'ed this for every minute, is there a risk of some sort of collision with the 5 minute poller? 1. Is it possible, as a feature request, to call alerter.php -h from syslog.php when an entry comes in? While I think Observium is an excellent piece of software, I wish it had just a little more ability to handle real-time alerts coming in. There are many situations that occur where an outage or event could be substantially shorter than the poller interval (like, a short UPS power loss), and I would like to have a little better quasi-real time alerting of these events. Thanks for you consideration.

2 1

Temperature sensor question
by Kleber Cristiano Santilli Coelho 30 Sep '22

30 Sep '22

Good Morning! I hope you're all well. I apologize if the question is inappropriate. I'm developing an IOT module and I use the "ENTITY" MIB for the sensors. I saw that Observium handles this MIB automatically, using the entPhySensorType OID to distinguish the sensor types and it works great, except for the temperature sensor, entPhySensorType value 8. I would like to understand if this has any special reason to adapt my code. Thank you, congratulations on the software. -- Kleber Coelho Campus Fernando Costa Universidade de São Paulo (19) 3565-4321

3 10

APC's universal I/O (UPS temp/humidity sensors) not showing in
by Steve Costaras 26 Sep '22

26 Sep '22

Have observium polling various APC ups's (AP9631 NMC cards). Observium correctly polls the battery temperatures, but when adding in probes to the universal I/O ports on the AP9631 (just trying with the temp sensor currently) I do not see the data being plotted on observium. Is this supposed to work? I don't have the humidity sensor currently (was trying to test with the temp sensor first before buying the temp/humidity combined sensors for the units). Would really like to get this data tracked for environmental data logging per rack (have a ups per rack). The data does show up in an snmpwalk: # snmpbulkwalk -v2c -c xxx yy.yy.yy.yy .1.3.6.1.4.1.318.1.1.25.1 iso.3.6.1.4.1.318.1.1.25.1.1.0 = INTEGER: 2 iso.3.6.1.4.1.318.1.1.25.1.2.1.1.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.2.1.1.2.1 = INTEGER: 2 iso.3.6.1.4.1.318.1.1.25.1.2.1.2.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.2.1.2.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.2.1.3.1.1 = STRING: "Port 1 Temp 1" iso.3.6.1.4.1.318.1.1.25.1.2.1.3.2.1 = STRING: "Port 2 Temp 2" iso.3.6.1.4.1.318.1.1.25.1.2.1.4.1.1 = STRING: "Port 1" iso.3.6.1.4.1.318.1.1.25.1.2.1.4.2.1 = STRING: "Port 2" iso.3.6.1.4.1.318.1.1.25.1.2.1.5.1.1 = INTEGER: 75 iso.3.6.1.4.1.318.1.1.25.1.2.1.5.2.1 = INTEGER: 90 iso.3.6.1.4.1.318.1.1.25.1.2.1.6.1.1 = INTEGER: 24 (Port 1 temp 1 sensor in C) iso.3.6.1.4.1.318.1.1.25.1.2.1.6.2.1 = INTEGER: 32 (port 2 temp 2 sensor in C) iso.3.6.1.4.1.318.1.1.25.1.2.1.7.1.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.2.1.7.2.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.2.1.8.1.1 = INTEGER: 0 iso.3.6.1.4.1.318.1.1.25.1.2.1.8.2.1 = INTEGER: 0 iso.3.6.1.4.1.318.1.1.25.1.2.1.9.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.2.1.9.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.2.1.10.1.1 = INTEGER: 2 iso.3.6.1.4.1.318.1.1.25.1.2.1.10.2.1 = INTEGER: 2 iso.3.6.1.4.1.318.1.1.25.1.3.0 = INTEGER: 2 iso.3.6.1.4.1.318.1.1.25.1.4.1.1.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.1.2.1 = INTEGER: 2 iso.3.6.1.4.1.318.1.1.25.1.4.1.2.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.2.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.3.1.1 = STRING: "Port 1 Temp 1" iso.3.6.1.4.1.318.1.1.25.1.4.1.3.2.1 = STRING: "Port 2 Temp 2" iso.3.6.1.4.1.318.1.1.25.1.4.1.4.1.1 = STRING: "Port 1" iso.3.6.1.4.1.318.1.1.25.1.4.1.4.2.1 = STRING: "Port 2" iso.3.6.1.4.1.318.1.1.25.1.4.1.5.1.1 = INTEGER: 0 iso.3.6.1.4.1.318.1.1.25.1.4.1.5.2.1 = INTEGER: 0 iso.3.6.1.4.1.318.1.1.25.1.4.1.6.1.1 = INTEGER: 10 iso.3.6.1.4.1.318.1.1.25.1.4.1.6.2.1 = INTEGER: 10 iso.3.6.1.4.1.318.1.1.25.1.4.1.7.1.1 = INTEGER: 40 iso.3.6.1.4.1.318.1.1.25.1.4.1.7.2.1 = INTEGER: 40 iso.3.6.1.4.1.318.1.1.25.1.4.1.8.1.1 = INTEGER: 60 iso.3.6.1.4.1.318.1.1.25.1.4.1.8.2.1 = INTEGER: 60 iso.3.6.1.4.1.318.1.1.25.1.4.1.9.1.1 = INTEGER: 0 iso.3.6.1.4.1.318.1.1.25.1.4.1.9.2.1 = INTEGER: 0 iso.3.6.1.4.1.318.1.1.25.1.4.1.10.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.10.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.11.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.11.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.12.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.12.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.13.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.13.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.14.1.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.14.2.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.15.1.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.15.2.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.16.1.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.16.2.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.17.1.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.17.2.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.18.1.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.18.2.1 = INTEGER: -1 iso.3.6.1.4.1.318.1.1.25.1.4.1.19.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.19.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.20.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.20.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.21.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.21.2.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.22.1.1 = INTEGER: 1 iso.3.6.1.4.1.318.1.1.25.1.4.1.22.2.1 = INTEGER: 1

3 4

HP A7510 JD238B and FDB count
by Kleber Cristiano Santilli Coelho 19 Sep '22

19 Sep '22

Hello everyone, everything good? I have an HP A7510 JD238B core switch that is not generating the FDB count graph in the observium. Does anyone have any tips for it to work? In the graphs section, the fdb_count graph does not appear. Thanks, -- Kleber Coelho Campus Fernando Costa Universidade de São Paulo (19) 3565-4321

1 0

Distro version changing continuously
by Simone Montagnani 19 Sep '22

19 Sep '22

Hi all, I'm writing because after the latest update I'm noticing that a lot of my servers Linux , specifically CentOS servers, are umping in the event log from CentOS to Redhat and viceversa. Is there something I can do to avoid this ? Simone

2 2

Huawei 6851 CPU Monitoring
by Farshid Abediny 14 Sep '22

14 Sep '22

Hello, My observium can not monitor Huawei 6851 CPU usages, is there any special settings for this? Thank you.

1 0

Huawei 6851
by Farshid Abediny 12 Sep '22

12 Sep '22

Hello, We have a pair of huawei 6851 but observium can not monitor the interface vlan traffics, What is the problem and how can we solve this problem? Thanks.

2 2

upgrading older versions
by Helmut Fritz 11 Sep '22

11 Sep '22

Hello, We have an instance of Observium running on Ubuntu 16.04. I would like to bring this OS somewhat current, say to 20.04 or maybe even 22.04. At the same time, our Observium version on this is 20.1.10233. Would there be an issue upgrading the OS with the current version of Observium running on them? I know a fresh install would be best, but then what is the migration procedure? Are all alerts and configurations moved in the migration (I would assume so, but want to understand this as it is a lot of work to recreate all of this). Is there an issue going in one jump from 20.1.10233 to latest, or should this be done in stages? Should Observium or the OS be dealt with first (concerned about php/mysql versions matching Observium versions, etc)? We are a Pro subscriber if it matters. Thx!

2 4

Prices / availibility
by Arnoldo Vidal Bravo 31 Aug '22

31 Aug '22

Hi, before a years ago we purchased a Professional edition, We have a question to get a Enterprise version. we need monitor much more devices. -- Saluda cordialmente

3 4

question about alert checker TEST
by Edvinas Kairys 27 Aug '22

27 Aug '22

Hello, I'm using alert checker with quite standard check: ifInOctets_perc ge 90 ifOutOctets_perc ge 90 But sometimes the SNMP returns incorrect value like 134651%, especially in Nexus devices. I would like to prevent that with inserting test value like: ifInOctets_perc le 100. But i'm wondering if it's possible to do this in single rule in Observium that would look like this: (ifInOctets_perc ge 90 and ifInOctets_perc le 100) or (ifOutOctets_perc ge 90 and ifOutOctets_perc le 100) Or i need to create separate rules for both groups ? Thanks

2 1

Stormshield issues
by Luca Sasdelli 27 Aug '22

27 Aug '22

Hi, on several Stormshield firewalls, I read some issues: * the firewalls are detected as Generic devices, while some time ago they were correctly detected as Stormshield firewalls * some ports report wrong speed: e.g. on 8 gigabit ports same appliance, some appears with 4Mbps, 20Mbps or 1Gbps, even by correcting them in its properties The second one isn't simply a cosmetic issue, because threshold alerts are generated with ordinary traffic. Best LS

2 2

Help with Alert Checker again / Multiprocessor System
by Michael 24 Aug '22

24 Aug '22

3 2