- observium - lists.observium.org

strange svn update
by Simon Smith 22 Jul '15

22 Jul '15

Hi All, wondering if anyone has seen this issue, I did an SVN update and getting this strange error? root@observium:~# svn update /opt/observium && /opt/observium/discovery.php -u U /opt/observium/html/pages/device/ports.inc.php U /opt/observium/html/pages/slas.inc.php U /opt/observium/html/pages/health.inc.php U /opt/observium/html/includes/functions.inc.php A /opt/observium/includes/polling/os/compellent.inc.php U /opt/observium/includes/discovery/sensors.inc.php A /opt/observium/includes/discovery/sensors/compellent-mib.inc.php U /opt/observium/includes/discovery/sensors/idrac-mib-smiv2.inc.php A /opt/observium/includes/definitions/status.inc.php U /opt/observium/includes/definitions/sensors.inc.php U /opt/observium/includes/definitions/os.inc.php U /opt/observium/includes/common.inc.php G /opt/observium/includes/defaults.inc.php U /opt/observium/includes/definitions.inc.php U /opt/observium/includes/snmp.inc.php A /opt/observium/mibs/dell/COMPELLENT-MIB Updated to revision 6724. Observium 0.15.7.6724 Discovery Currently installed revision : 6724 (0.15.7.6724) Latest revision available on observium.org : 6724 <div class="alert alert-danger"> <div>Failed INSERT into DB, see details in 'db (0.15.7.6724 <div class="alert alert-danger"> <div>Failed INSERT into DB, see details in 'db.log' inside log dir.</div> </div>) root@observium:~# Ive then checked the db.log file and I see this [2015/07/14 21:21:58 +0100] alerter.php(19534): Failed dbQuery (#2006 - MySQL server has gone away), Query: SELECT * FROM `alert_assoc` [2015/07/14 21:21:58 +0100] alerter.php(19534): Failed dbQuery (#2006 - MySQL server has gone away), Query: SELECT `device_id` FROM `devices` WHERE `disabled` = 0 AND `device_id` = '9' ORDER BY `device_id` ASC [2015/07/14 21:22:04 +0100] poller.php(19518): Failed dbQuery (#2006 - MySQL server has gone away), Query: UPDATE `alert_table-state` set `state` ='{\"metrics\":{\"device_status_type\":\"snmp\",\"device_status\":\"0\"},\"failed\":[{\"value\":\"snmp\",\"condition\":\"=\",\"metric\":\"device_status_type\"},{\"value\":\"0\",\"condition\":\"=\",\"metric\":\"device_status\"}]}',`count` ='1783',`alert_status` ='0',`last_message` ='Checks failed',`last_checked` ='1436905324' WHERE `alert_table_id` = '84' [2015/07/14 21:22:04 +0100] poller.php(19518): Failed dbQuery (#2006 - MySQL server has gone away), Query: UPDATE `alert_table-state` set `state` ='{\"metrics\":{\"device_uptime\":null}}',`count` ='0',`alert_status` ='1',`last_message` ='Checks OK',`last_checked` ='1436905324' WHERE `alert_table_id` = '85' [2015/07/14 21:22:04 +0100] poller.php(19518): Failed dbQuery (#2006 - MySQL server has gone away), Query: UPDATE `alert_table-state` set `state` ='{\"metrics\":{\"device_status_type\":\"snmp\",\"device_status\":\"0\"},\"failed\":[{\"value\":\"0\",\"condition\":\"=\",\"metric\":\"device_status\"}]}',`count` ='0',`alert_status` ='1',`last_message` ='Checks OK',`last_checked` ='1436905324' WHERE `alert_table_id` = '126' [2015/07/14 21:22:04 +0100] poller.php(19518): Failed dbQuery (#2006 - MySQL server has gone away), Query: INSERT INTO `perf_times` (`type`,`doing`,`start`,`duration`,`devices`) VALUES ('poll','44','1436905318.1116','6.053','1') [2015/07/20 21:37:01 +0100] discovery.php(31122): Failed dbQuery (#1146 - Table 'observium.observium_attribs' doesn't exist), Query: SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema' [2015/07/20 21:37:04 +0100] poller.php(31134): Failed dbQuery (#1146 - Table 'observium.observium_attribs' doesn't exist), Query: SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema'; [2015/07/20 21:37:07 +0100] poller.php(31158): Failed dbQuery (#1146 - Table 'observium.observium_attribs' doesn't exist), Query: SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema’; but when i check my MySQL DB i see the table observium_attribs exists and data is in there ? any ideas how i clear this alert msg when i do the svn update? Regards Simon

2 2

Build 6668 - cannot add Alert Contact
by chott＠praha1.net 22 Jul '15

22 Jul '15

Hello, after buy PRO version we cannot set Alerting contact because after click to "Add Contact" http://<IPobservium>/add_contact/ Observium redirect to Main page Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net>

4 5

Re: [Observium] observium Digest, Vol 60, Issue 132
by Dudu Handelman 21 Jul '15

21 Jul '15

Thanks Mike. Just upgraded to r6719 still blank. David Sent from my Samsung device -------- Original message -------- From: observium-request(a)observium.org Date: 21/07/2015 16:20 (GMT+02:00) To: observium(a)observium.org Subject: observium Digest, Vol 60, Issue 132 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: Neighbours blank page. (Mike Stupalov) 2. Problem during upgrade to r6718 (Romain Winter) ---------------------------------------------------------------------- Message: 1 Date: Tue, 21 Jul 2015 16:08:40 +0300 From: Mike Stupalov <mike(a)observium.org> To: observium(a)observium.org Subject: Re: [Observium] Neighbours blank page. Message-ID: <55AE4458.3070708(a)observium.org> Content-Type: text/plain; charset="utf-8" Fixed in r6718. Tnx to all reporters :) On 21.07.15 16:04, Jonathan Dyson wrote: > > We also have empty pages! > > > > Thanks, > > Jon > > > > *From:*observium [mailto:observium-bounces@observium.org] *On Behalf > Of *Tomasz Karczewski > *Sent:* 21 July 2015 14:02 > *To:* 'Observium Network Observation System' > *Subject:* Re: [Observium] Neighbours blank page. > > > > I have empty pages too. > > > > Tomasz Karczewski > > Administrator Sieci > > > > > > tkarczewski(a)man.olsztyn.pl <mailto:tkarczewski@man.olsztyn.pl> > > http://www.man.olsztyn.pl http://www.uwm.edu.pl > > tel. (89) 523 45 55 fax. (89) 523 43 47 > > > > O?rodek Eksploatacji i Zarz?dzania > > Miejsk? Sieci? Komputerow? OLMAN w Olsztynie > > Uniwersytet Warmi?sko-Mazurski w Olsztynie > > > > *From:*Dudu Handelman [mailto:duduhandelman@hotmail.com] > *Sent:* Tuesday, July 21, 2015 2:43 PM > *To:* observium(a)observium.org <mailto:observium@observium.org> > *Subject:* [Observium] Neighbours blank page. > > > > Hi All, > Just upgraded to revision 6716, > For some reason the Neighbours and the Map sections for Switches are > empty. > The data is in the database and displayed correctly on the interfaces > page. > > Has any one else notice this? > > Many Thanks > David, > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov http://observium.org

2 1

Neighbours blank page.
by Dudu Handelman 21 Jul '15

21 Jul '15

Hi All, Just upgraded to revision 6716, For some reason the Neighbours and the Map sections for Switches are empty. The data is in the database and displayed correctly on the interfaces page. Has any one else notice this? Many Thanks David,

4 4

Problem during upgrade to r6718
by Romain Winter 21 Jul '15

21 Jul '15

Hi, Im upgrading to reversion 6718 Im getting database error's while upgrading: > cat update-errors.log > [2015/05/28 15:04:58 +0200] discovery.php(13518): ====== Schema update > 137 -> 138 ============== > [2015/05/28 15:04:58 +0200] discovery.php(13518): Query: ALTER TABLE > `sensors` ADD `entPhysicalIndex_measured` varchar(16) COLLATE > utf8_unicode_ci DEFAULT NULL AFTER `sensor_custom_limit`; > [2015/05/28 15:04:58 +0200] discovery.php(13518): Error: Duplicate > column name 'entPhysicalIndex_measured' > [2015/05/28 15:04:58 +0200] discovery.php(13518): Query: ALTER TABLE > `sensors` ADD `measured_class` VARCHAR( 32 ) NULL DEFAULT NULL AFTER > `entPhysicalIndex_measured`; > [2015/05/28 15:04:58 +0200] discovery.php(13518): Error: Duplicate > column name 'measured_class' > [2015/05/28 15:04:58 +0200] discovery.php(13518): Query: ALTER TABLE > `sensors` ADD `measured_entity` VARCHAR( 32 ) NULL DEFAULT NULL > AFTER `measured_class`; > [2015/05/28 15:04:58 +0200] discovery.php(13518): Error: Duplicate > column name 'measured_entity' Also, db.log > cat db.log > [2015/07/21 15:13:02 +0200] poller.php(1056): Failed dbQuery (#1146 - > Table 'observium.observium_attribs' doesn't exist), Query: SELECT > `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema'; > [2015/07/21 15:13:08 +0200] discovery.php(1128): Failed dbQuery (#1146 > - Table 'observium.observium_attribs' doesn't exist), Query: SELECT > `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema'; > [2015/07/21 15:13:08 +0200] discovery.php(1128): Failed dbQuery (#1146 > - Table 'observium.dbSchema' doesn't exist), Query: UPDATE `dbSchema` > set `version` ='211' Anybody having the same issue? Kind regards, Romain winter. -- OpenmindedIT <http://www.open-minded-it.nl> Adres: Aphroditestraat 23 5047 TW Tilburg tel: 0031 (0) 13 707 8093 fax: 0031 (0) 13 570 1113 Web: www.openmindedit.nl <http://www.open-minded-it.nl> E-mail: r.winter(a)openmindedit.nl <mailto:r.winter@openmindedit.nl> --- Dit bericht is slechts bestemd voor de geadresseerde en kan informatie bevatten die persoonlijk en/of vertrouwelijk is en die niet openbaar mag worden gemaakt. Indien u niet zelf de geadresseerde bent, wordt u erop gewezen dat verdere verspreiding, openbaarmaking of vermenigvuldiging van dit bericht verboden is. Indien u dit bericht per vergissing hebt ontvangen, verzoek ik u mij zo snel mogelijk op de hoogte te stellen en het originele bericht en eventuele kopieën ervan, te verwijderen. Op alle aanbiedingen, overeenkomsten , facturen en transacties van Open Minded IT ECS zijn onze algemene voorwaarden van toepassing. Deze kunt U inzien op http://www.open-minded-it.nl/index.php/algemene-voorwaarden/ op verzoek wordt een exemplaar U kosteloos toegezonden. Dank voor uw medewerking. Open Minded IT ECS Bezoek adres: Aphroditestraat 23 5047 TW Tilburg tel: 0031 (0) 13 707 8093 fax: 0031 (0) 13 570 1113 Web: www.open-minded-it.nl E-mail: info(a)open-minded-it.nl

2 3

Comercial Support
by Rudolf Hoehler 21 Jul '15

21 Jul '15

Hello Observium Team, I would like to purchase Support/Service options. From the client page I can only renew my 150 GBP subscription. How do we go about purchasing support or paying for feature development? Regards, Rudolf

1 0

Raisecom
by Adam Armstrong 21 Jul '15

21 Jul '15

Any of you guys running Raisecom kit? Thanks, adam.

3 2

OVS integration plugin for observium available?
by gmail 21 Jul '15

21 Jul '15

Hi, Is there any plugin for observium to monitor traffic that's being handled by a OpenVswitch? We have built an openstack-environment and it's built on openvswitch with neutron, I would love to see the integration to be able to see traffic on OVS-ports. The only option we have today is going zenoss monitoring, from what i've found out there on google atleast. If there's no solution for this I would suggest someone building one as the lack of monitoring openstack and virtualswitches are big. Thanks /Tobias

3 4

no rancid integration
by Ryan Milton 20 Jul '15

20 Jul '15

I attempted the rancid integration from the configuration options. I had a separate rancid configuration that I attempted to modify following the guide that seems to have broken my rancid. Please help. Either I need a way to reverse the effect of this command: php /opt/observium/scripts/generate-rancid.php > /var/lib/rancid/networking/router.db or fix rancid's ability to read the etc/hosts file I now keep getting this in /tmp: -rw-r----- 1 rancid rancid 0 Jul 18 03:45 .networking.run.lock I think my rancid can't read the /etc/hosts or something, because testing clogin results like this: rancid@rancid:/var/lib/rancid/logs$ /usr/lib/rancid/bin/clogin 192.168.80.1 192.168.80.1 spawn telnet 192.168.80.1 Trying 192.168.80.1... Connected to 192.168.80.1. Escape character is '^]'. User Access Verification Username: rancid Password: FP-B-3750-01-TX# FP-B-3750-01-TX#exit Connection closed by foreign host. rancid@rancid:/var/lib/rancid/logs$ /usr/lib/rancid/bin/clogin FP-3750-TX fp-3750-tx spawn telnet fp-3750-tx Trying 192.168.80.1... Connected to FP-3750-TX. Escape character is '^]'. User Access Verification Username: rancid Password: % Login invalid Username: rancid errors in rancid logs (/var/lib/rancid/logs): starting: Sat Jul 18 03:30:01 EDT 2015 Trying to get all of the configs. fp-3750-nj clogin error: Error: Invalid login: fp-3750-nj fp-3750-nj: missed cmd(s): dir /all nvram:,show controllers,dir /all sec-slot0:,dir /all harddiskb:,dir /all harddisk:,dir /all sec-disk2:,dir /all disk2:,dir /all sec-disk1:,dir /all slot2:,show spe version,dir /all slavebootflash:,dir /all sup-bootflash:,dir /all slaveslot0:,show flash,show vtp status,write term,show inventory raw,show vlan-switch,dir /all slavenvram:,show boot,show variables boot,dir /all sup-microcode:,show diagbus,dir /all sec-nvram:,dir /all sec-disk0:,show debug,dir /all bootflash:,show bootvar,dir /all sec-slot1:,dir /all slavedisk2:,show shun,show diag,dir /all slavedisk1:,show c7200,show vlan,dir /all disk0:,dir /all harddiska:,dir /all disk1:,show redundancy secondary,show running-config view full,dir /all slaveslot2:,show env all,dir /all sec-bootflash:,show controllers cbus,show rsp chassis-info,show install active,dir /all slot0:,dir /all slot1:,dir /all sec-slot2:,show gsr chassis,dir /all sup-bootdisk:,show idprom backplane,more system:running-config,show version,show module,dir /all slavedisk0:,show capture,dir /all slavesup-bootflash:,dir /all slaveslot1:,show diag chassis-info,show running-config fp-3750-nj: End of run not found ! fp-3750-tx clogin error: Error: Invalid login: fp-3750-tx fp-3750-tx: missed cmd(s): dir /all slavedisk0:,show controllers cbus,dir /all disk1:,show c7200,show idprom backplane,show diagbus,dir /all nvram:,show boot,show module,dir /all slot2:,dir /all slavedisk1:,dir /all sup-bootdisk:,show rsp chassis-info,dir /all slavebootflash:,dir /all slavesup-bootflash:,dir /all slaveslot1:,show install active,show flash,show inventory raw,show vlan,dir /all sec-disk0:,dir /all sec-disk1:,dir /all sec-nvram:,dir /all slaveslot0:,show spe version,show controllers,dir /all slavenvram:,show bootvar,dir /all disk2:,show env all,dir /all bootflash:,show gsr chassis,dir /all harddiska:,dir /all sec-slot1:,dir /all slot1:,dir /all disk0:,show variables boot,show shun,show diag,show running-config view full,dir /all sec-disk2:,show version,more system:running-config,dir /all sec-slot0:,show diag chassis-info,dir /all sup-bootflash:,write term,dir /all harddisk:,dir /all sec-bootflash:,dir /all slot0:,show capture,show vtp status,show redundancy secondary,show debug,dir /all sec-slot2:,dir /all slavedisk2:,dir /all harddiskb:,show running-config,show vlan-switch,dir /all slaveslot2:,dir /all sup-microcode: fp-3750-tx: End of run not found ! qfx_ex-vc-telx_nj jlogin error: Error: Couldn't login qfx_ex-vc-telx_nj: missed cmd(s): show chassis alarms,show chassis hardware detail,show version detail,show chassis clocks,show chassis fpc detail,show chassis scb,show system core-dumps,show system boot-messages,show chassis routing-engine,show chassis ssb,show chassis cfeb,show chassis feb,show configuration,show chassis sfm detail,show chassis firmware,show system license,show chassis feb detail,show chassis environment qfx_ex-vc-telx_nj: End of run not found # 172.18.5.4 clogin error: Error: TIMEOUT reached 172.18.5.4: missed cmd(s): show running-config,show environment fex all fan,dir usb2:,show version build-info all,show inventory,show module xbar,show boot,term no monitor-force,dir logflash:,show module,show vlan,show system redundancy status,show environment clock,dir bootflash:,show environment fan,show processes log vdc-all,dir slot0:,show version,show license,dir debug:,show vtp status,show license usage,dir volatile:,show environment temperature,show license host-id,show debug,show environment power,dir usb1:,show cores vdc-all 172.18.5.4: End of run not found /usr/bin/tail: cannot open ‘172.18.5.4.new’ for reading: No such file or directory srx-pune jlogin error: Error: Check your password for srx-pune srx-pune: missed cmd(s): show chassis ssb,show chassis routing-engine,show chassis firmware,show chassis scb,show system core-dumps,show version detail,show configuration,show chassis sfm detail,show system license,show chassis hardware detail,show chassis environment,show chassis cfeb,show chassis feb,show chassis fpc detail,show chassis feb detail,show chassis clocks,show system boot-messages,show chassis alarms srx-pune: End of run not found # ipt-nj-asa clogin error: Error: TIMEOUT reached ipt-nj-asa: missed cmd(s): show module,dir /all sec-slot0:,dir /all slot1:,more system:running-config,dir /all slavedisk1:,show spe version,show diag chassis-info,dir /all sec-disk0:,dir /all nvram:,dir /all slavedisk2:,dir /all harddisk:,dir /all sec-bootflash:,show c7200,dir /all slavenvram:,dir /all disk2:,show idprom backplane,show vlan,show diagbus,dir /all slaveslot0:,dir /all sec-slot2:,show redundancy secondary,show install active,show gsr chassis,dir /all sup-bootflash:,show variables boot,dir /all sup-bootdisk:,dir /all harddiskb:,dir /all slot0:,dir /all bootflash:,dir /all slavebootflash:,show boot,dir /all disk0:,show version,dir /all sec-slot1:,show running-config,show capture,show running-config view full,dir /all slaveslot1:,dir /all sec-nvram:,show controllers,dir /all sup-microcode:,dir /all disk1:,dir /all slavedisk0:,show vtp status,dir /all slavesup-bootflash:,dir /all harddiska:,dir /all slaveslot2:,show debug,show rsp chassis-info,show inventory raw,show flash,dir /all sec-disk1:,dir /all sec-disk2:,show controllers cbus,show diag,dir /all slot2:,write term,show bootvar,show vlan-switch,show env all,show shun ipt-nj-asa: End of run not found ipt-tx-asa clogin error: Error: TIMEOUT reached ipt-tx-asa: missed cmd(s): show variables boot,show capture,dir /all disk1:,dir /all slot2:,show install active,dir /all slot1:,dir /all bootflash:,dir /all sup-microcode:,dir /all harddiskb:,show diag,show running-config,dir /all slaveslot1:,show boot,dir /all sup-bootdisk:,show spe version,show vlan,show gsr chassis,dir /all sec-slot2:,show vtp status,show diag chassis-info,dir /all slot0:,dir /all sec-disk2:,show shun,dir /all disk0:,dir /all sec-slot0:,dir /all nvram:,dir /all harddiska:,dir /all sec-disk0:,write term,show rsp chassis-info,dir /all slavedisk1:,show running-config view full,dir /all sec-disk1:,dir /all slavedisk2:,show controllers,dir /all slavebootflash:,show debug,dir /all slavedisk0:,more system:running-config,show bootvar,dir /all sup-bootflash:,show vlan-switch,dir /all slavenvram:,show controllers cbus,show idprom backplane,dir /all sec-nvram:,show c7200,show env all,dir /all sec-slot1:,dir /all sec-bootflash:,dir /all slaveslot2:,dir /all disk2:,show inventory raw,dir /all slaveslot0:,show version,show diagbus,show redundancy secondary,show flash,dir /all harddisk:,show module,dir /all slavesup-bootflash: ipt-tx-asa: End of run not found srx-364 jlogin error: Error: TIMEOUT reached srx-364: missed cmd(s): show chassis routing-engine,show chassis cfeb,show chassis sfm detail,show chassis environment,show chassis feb,show version detail,show chassis scb,show chassis ssb,show chassis alarms,show chassis fpc detail,show chassis feb detail,show configuration,show chassis firmware,show chassis hardware detail,show chassis clocks,show system core-dumps,show system boot-messages,show system license srx-364: End of run not found srx-mx jlogin error: Error: TIMEOUT reached Ryan

3 16

Observium Rocks
by Robert Williams 20 Jul '15

20 Jul '15

Hi, I just wanted to say that Observium rocks. Having just completed 4 weeks of back-to-back network upgrades (replacing most of our core hardware across 4 different sites) we have found Observium invaluable as a means of identifying issues, immediately, for new hardware which has just been installed. As well as spotting BGP sessions with issues, ports with CRC errors, or light levels which are out of scope. Requiring the least information from us, for the most detailed output back to us in return, coupled with a summary of ‘what needs to be fixed’ in a single page. Over the years we have been using it, we have watched it grow from a nice little auto-detecting utility, into an extremely powerful monitoring system. So, rather than posting a bug or feature request, I just thought I’d say thank you to the team who feed into this product. You have saved me from more than one unnecessary headache, in the last 4 weeks alone! Cheers :) Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

3 2

Support for Vibe Voipex?
by Rudolf Hoehler 20 Jul '15

20 Jul '15

Hello Community, Does anyone out their use Vibe technology in their deployments? I am putting feelers out for co-sponsoring the development or co-developing? Please let me know. Regards, Rudolf

1 0

Mailing list archive offline?
by Rudolf Hoehler 20 Jul '15

20 Jul '15

Hi All, The link to the archive on this page - http://www.observium.org/wiki/Mailing_Lists# - points to - https://www.mail-archive.com/observium@observium.org/ - which returns a 404? Just want to confirm that the archive is off line or I'm looking in the wrong place? Rudolf

1 0

printing page looks weird
by Simon Smith 20 Jul '15

20 Jul '15

Hi All, wondered if anyone has seen there printing page to look like this? for some reason I have the Toner graphs first then the Toner table underneath, but under that again is the Pagecounter and Waste Toner Box ? the page looks laid out weird and incorrectly ? what also weird is the toners for my Ricoh MP C400 is all showing as -nan% ??? and the levels as -3% or -2% i have included screenshot showing what i mean Regards Simon

1 0

Dell Compellent / FalconStor / HaProxy
by Falco Schmutz 20 Jul '15

20 Jul '15

Hello, Maybe someone is interested to be paid to add Dell Compellent Storage / FalconStor / Haproxy to observium system. I also need to add Fan information from DELL CMC. Please contact me. Regards, -- ____________________________________________________________________________________________ Falco SCHMUTZ <https://t.yesware.com/tl/43e8266b48d38429119f80eda7ceed0774081fe3/35d5f1ab4…> E-mail : fschmutz(a)premaccess.com Mobile : +33 6 80 22 00 29 Fixe Suisse : +41 44 586 77 74 Fax Suisse : +41 26 347 28 90 Fax France : +33 9 72 12 19 25 premaccess SA Route des Arsenaux 41 - CP 132 CH-1705 Fribourg, Suisse http://www.premaccess.com <https://t.yesware.com/tl/43e8266b48d38429119f80eda7ceed0774081fe3/35d5f1ab4…> <https://t.yesware.com/tl/43e8266b48d38429119f80eda7ceed0774081fe3/35d5f1ab4…> <https://t.yesware.com/tl/43e8266b48d38429119f80eda7ceed0774081fe3/35d5f1ab4…> <https://t.yesware.com/tl/43e8266b48d38429119f80eda7ceed0774081fe3/35d5f1ab4…> ____________________________________________________________________________________________ Attention : le présent message et toutes les pièces jointes sont confidentiels et établis a l'attention exclusive du ou des destinataire(s) indique(s). Toute autre diffusion ou utilisation non autorisée est interdite. Si vous recevez ce message par erreur, veuillez immédiatement en avertir l'expéditeur par e-mail en retour, détruire le message et vous abstenir de toute référence aux informations qui y figurent afin d'éviter les sanctions attachées a la divulgation et a l'utilisation d'informations confidentielles. Les messages électroniques sont susceptibles d'altération. Nous déclinons toute responsabilité en cas d'altération ou de falsification du présent message. Warning : this e-mail and any files attached are confidential and intended solely to the named addressee(s). Any unauthorised dissemination or use is strictly prohibited. If you received this e-mail in error, please immediately notify the sender by reply e-mail and then delete the e-mail from your system. Please do not copy, use or make reference to it for any purpose, or disclose its contents to any person : to do so could expose you to sanctions. E-mails can be altered or falsified. We shall not be liable for any alteration or falsification on this e-mail.

4 4

Thank you all Observium developers.
by Jolyon Ansuz 20 Jul '15

20 Jul '15

Hello all, I’d like to thank the developers of Observium, whomever you are. I’ve run up a VMWare Ubuntu server 14.x with Observium to replace an ageing and unsupported Cacti installation here. We're running Many(TM) core, distribution and edge routers and switches and this install is looking at every port I can get SNMP to. We use Enterasys/Extreme and a couple of Cisco devices. The alpha prototype has moved to beta and people here are liking what they are seeing. Soon, with some more documentation, I’ll elevate this to production. So, whilst I have hundreds of switches to deal with, this means thousands of ports to deal with and as any good lazy administrator, I found it was easier to utilise my database development experience and go straight to the databases, which I now offer to the group as examples, yes Examples(TM) for others to learn from. You will require some database knowledge to grok these. Sincerely, Jolyon Ansuz Senior Network and Communications Administrator Communications Infrastructure Information Technology University of New England Armidale NSW 2351 P: +61 2 6773 3568 M: +61 412 735 836 L: jansuz @ une.edu.au This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of e-mail transmission. If verification is required please request a hard-copy version. "Most of the things worth doing in the world had been declared impossible before they were done.", Louis D. Brandeis

1 0

Future Releases/Integartion
by Janos Farkas 19 Jul '15

19 Jul '15

Hello, Currently we are testing observium pro and would like to know if it would support nsclient and nagios plugins in the future releases, and if not will there be any alternatives for windows agent ? Thank you.

4 6

Alert emails header
by Fabrice Charlier 17 Jul '15

17 Jul '15

Hi all, Since last update of observium professional version that we did last monday, alert emails are not anymore accepted by our mailing list service (based on Sympa software). After investigations by our mail system administrator, it seems that problem is coming from fields ordering in observium mails header: "From", "Date" et "Message-ID" should be before others fields prefixed by "X-". Another problem is that email address in "From" field should be between "< >". Example of mail generated by observium here: http://pastebin.com/tiJFG10e If we modify this example like this http://pastebin.com/DryMB9MJ, it's correctly delivered by our mailing list service. I suppose that some modifications have been done in observium mail system in last weeks because it's a very new problem for us. Regards, -- -------------------------------------------------------------------- Fabrice Charlier - UCL/SGSI/SIPR Office : +32.10.47.32.34 GSM : +32.474.86.81.23 -------------------------------------------------------------------

2 1

Ubiquiti routers and switches
by tom＠pack.co.nz 17 Jul '15

17 Jul '15

Is anyone using Ubiquiti EdgeRouters and EdgeSwitches with Observium? I know they are not on the supported devices list, but neither are the APs and they seem to work quite well. Cheers Tom Henderson IT Manager | Marvel Hospitality | 027 461 4403 | tom(a)marvelhospitality.co.nz -- ---------------------------------------------------------------------------If you are not the intended recipient of this email, you must not disclose, copy, or distribute any information contained in or attached to it, or take any action/inaction based on it. Please contact us immediately, and delete this email from your system. Any views or opinions presented in this email are solely those of the author and not of Pack & Company (NZ) Limited (the "Company"), however any intellectual property contained in or attached to this email is the property of the Company. Thank you.

4 7

Add Contact not working
by Romain Winter 17 Jul '15

17 Jul '15

Hi, I want to add a contact so alerts are recieved by contacts. It seems not to be working, it redirects back to the homepage. I've found this on the mail archive: https://www.mail-archive.com/observium@observium.org/msg09803.html Same issue. Are there all ready any plans on this? Is there a workaround on this? Can i just set some stuff inside the config.php? Kind Regards, Romain Winter. -- OpenmindedIT <http://www.open-minded-it.nl> Adres: Aphroditestraat 23 5047 TW Tilburg tel: 0031 (0) 13 707 8093 fax: 0031 (0) 13 570 1113 Web: www.openmindedit.nl <http://www.open-minded-it.nl> E-mail: r.winter(a)openmindedit.nl <mailto:r.winter@openmindedit.nl> --- Dit bericht is slechts bestemd voor de geadresseerde en kan informatie bevatten die persoonlijk en/of vertrouwelijk is en die niet openbaar mag worden gemaakt. Indien u niet zelf de geadresseerde bent, wordt u erop gewezen dat verdere verspreiding, openbaarmaking of vermenigvuldiging van dit bericht verboden is. Indien u dit bericht per vergissing hebt ontvangen, verzoek ik u mij zo snel mogelijk op de hoogte te stellen en het originele bericht en eventuele kopieën ervan, te verwijderen. Op alle aanbiedingen, overeenkomsten , facturen en transacties van Open Minded IT ECS zijn onze algemene voorwaarden van toepassing. Deze kunt U inzien op http://www.open-minded-it.nl/index.php/algemene-voorwaarden/ op verzoek wordt een exemplaar U kosteloos toegezonden. Dank voor uw medewerking. Open Minded IT ECS Bezoek adres: Aphroditestraat 23 5047 TW Tilburg tel: 0031 (0) 13 707 8093 fax: 0031 (0) 13 570 1113 Web: www.open-minded-it.nl E-mail: info(a)open-minded-it.nl

2 1

New install testing
by Ryan Milton 16 Jul '15

16 Jul '15

I am testing this product. I have only one device which successful added. Everything looks good but for the fact that I see no output on the graphs. They are blank. I’ve seen some replies that say “You installed incorrectly.” Do I need to just go through the installation steps again? Or is there a better way to address what I missed? Thank you, Ryan

3 15

Mikrotik queue
by Eduardo Schoedler 16 Jul '15

16 Jul '15

Hi, I know that you people don't like Mikrotik (me too), but can you monitor and graph Mikrotik's queues? [admin@MK] /queue simple> print oid Flags: X - disabled, I - invalid, D - dynamic 0 X name=.1.3.6.1.4.1.14988.1.1.2.1.1.2.24 bytes-in=.1.3.6.1.4.1.14988.1.1.2.1.1.8.24 bytes-out=.1.3.6.1.4.1.14988.1.1.2.1.1.9.24 packets-in=.1.3.6.1.4.1.14988.1.1.2.1.1.10.24 packets-out=.1.3.6.1.4.1.14988.1.1.2.1.1.11.24 queues-in=.1.3.6.1.4.1.14988.1.1.2.1.1.12.24 queues-out=.1.3.6.1.4.1.14988.1.1.2.1.1.13.24 1 X name=.1.3.6.1.4.1.14988.1.1.2.1.1.2.9 bytes-in=.1.3.6.1.4.1.14988.1.1.2.1.1.8.9 bytes-out=.1.3.6.1.4.1.14988.1.1.2.1.1.9.9 packets-in=.1.3.6.1.4.1.14988.1.1.2.1.1.10.9 packets-out=.1.3.6.1.4.1.14988.1.1.2.1.1.11.9 queues-in=.1.3.6.1.4.1.14988.1.1.2.1.1.12.9 queues-out=.1.3.6.1.4.1.14988.1.1.2.1.1.13.9 2 X name=.1.3.6.1.4.1.14988.1.1.2.1.1.2.1 bytes-in=.1.3.6.1.4.1.14988.1.1.2.1.1.8.1 bytes-out=.1.3.6.1.4.1.14988.1.1.2.1.1.9.1 packets-in=.1.3.6.1.4.1.14988.1.1.2.1.1.10.1 packets-out=.1.3.6.1.4.1.14988.1.1.2.1.1.11.1 queues-in=.1.3.6.1.4.1.14988.1.1.2.1.1.12.1 queues-out=.1.3.6.1.4.1.14988.1.1.2.1.1.13.1 3 X name=.1.3.6.1.4.1.14988.1.1.2.1.1.2.17 bytes-in=.1.3.6.1.4.1.14988.1.1.2.1.1.8.17 bytes-out=.1.3.6.1.4.1.14988.1.1.2.1.1.9.17 packets-in=.1.3.6.1.4.1.14988.1.1.2.1.1.10.17 packets-out=.1.3.6.1.4.1.14988.1.1.2.1.1.11.17 queues-in=.1.3.6.1.4.1.14988.1.1.2.1.1.12.17 queues-out=.1.3.6.1.4.1.14988.1.1.2.1.1.13.17 Thanks! Regards, -- Eduardo Schoedler

2 2

upgrade to PRo version
by Samarasinghe, Sujith 16 Jul '15

16 Jul '15

Hi , I am trying out Observium for our network monitoring software. One of the option I have seen is alerts are not working on CE version . Do we need to purchase Professional membership to enable that function? I believe its GBK 150 per year . After we purchase professional version do we receive the path the receive the new installation repo and can the current testing CE version update to professional version seamlessly? Thanks, Sujith. Confidentiality Note: This e-mail and any attachments are confidential and may be protected by legal privilege. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation.

2 1

First CE installation: Authentication issues
by Ciro Iriarte 16 Jul '15

16 Jul '15

Hi!, I just upgraded my home test installation from old SVN version to CE edition and I'm having issues authenticating with http-auth. On the first try I get my own AuthName which has a value of "testing lab" but once I input the authentication info I get another box asking for authentication, with a new AuthName with value "Unauthorised access or use shall render the user liable to criminal and/or civil prosecution.". Can anybody tell me if authentication changed sin the single version times?. This is the configuration file that worked previusly: <VirtualHost *:80> DocumentRoot /opt/observium/html/ ServerName observium.lab.com CustomLog /opt/observium/logs/access_log combined ErrorLog /opt/observium/logs/error_log <Directory "/opt/observium/html/"> AllowOverride All Options FollowSymLinks MultiViews Includes Require all granted Order allow,deny Allow from all AuthType Kerberos AuthName "testing lab" KrbMethodNegotiate On KrbMethodK5Passwd On KrbAuthRealms LAB.COM Krb5KeyTab /etc/httpd/lab.keytab KrbLocalUserMapping On Require valid-user </Directory> </VirtualHost> Any pointers? Regards, -- Ciro Iriarte http://iriarte.it --

2 2

Delete email
by Bank Jerry (US Partners) 16 Jul '15

16 Jul '15

Hello, Please delete the following address: jerry.bank(a)partners.mcd.com

1 0

MySQL Instances (2)
by Tiago Reis 15 Jul '15

15 Jul '15

Any ideia on separate to MySQL instances on Observium? Is it possible? The server has more than one instance of MySQL running on different ports. Kind Regards, Tiago

5 10

Best Practices
by Chris Welber yahoo 15 Jul '15

15 Jul '15

I'm setting up observium in a multi site WAN config, each location will go over the WAN into a data center. I'm wondering about general best practices being a newb, and any specific advise for a roll out. Thanks, Christopher C. Welber 215 West 11th Street New York, NY 10014 CompTIA A+ certified CompTIA Security+ certified CompTIA Network+ certified CompTIA Cloud+ certified CompTIA Mobility+ CompTIA Server+ Cisco CCENT (646) 478-9730 Fax (800) 370-9587 This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the sender. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. Finally, the recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email

2 1

Reporting
by Josh Hopper 14 Jul '15

14 Jul '15

Your software gets better and better. The metrics are wonderful but I spend a lot of time screenshotting them to send to our executives. Can you put a print button in? Or, even better, CRON a print job to send say a week/month/day’s worth of bandwidth on a specific port or server to an email address? That would be amazing. Or, is that something we could pay for and have added to the version(s) for everyone? I’m on subscription if that matters.

9 13

Problems adding hosts
by Johnson, Edward A. 14 Jul '15

14 Jul '15

I’m having troubles adding devices recently. In the add host page, it shows blue for SNMP an looks like it’s been added but below that it says that it can’t ping the host. I can SSH to the server and both ping and snmpwalk work. Any ideas?

3 7

GeoLocation slightly off?
by Rudolf Hoehler 13 Jul '15

13 Jul '15

Hello Community, I've read through the archives and I've got my geo-location sysLocation string working. What I cannot find an answer on is why the Latitude/Longitude insists on being slightly different from the actual co-ordinteas that I specify. As you can see in the screen shot, Observium parses the SysLocation fine and passes the exact correct values to MAPQUEST. Where do the slightly incorrect values come from? Thanks for any help guys. Regards, Rudolf

2 4

Linux custom snmpd & alert
by Fabien Chadon 13 Jul '15

13 Jul '15

Hello, I try to find the best solution for add custom alerting for Linux with observium. As for now it's not possible to use xinetd with new alert system, i wonder how i can add properly custom data that's will be graph and avaible in checker conditions. I would like add a simple test as custom script that's will download a http page and return 0 if failed or a value in ms for time to download the page. Will add the script in snmpd.conf. But what will be the best oid for this without change observium code ? Thanks for help. Best Regards, -- Fabien

1 0

Netflow Sensor
by Andrew Colin 10 Jul '15

10 Jul '15

Hi Guys We currenly have the professional version of observium Is there any way to add a netflow sensor to observium similar to below http://nfsen.sourceforge.net/ Regards Andrew

4 4

VLAN Bandwidth Measuring Support
by Fred Pedrisa 10 Jul '15

10 Jul '15

Dear, guys. We are using H3C 5820 switch (comware) and currently now observium supports it pretty well, however a feature it is missing, is the bandwidth measuring for the Vlan-Interfaces this switch have. Is there any way it could be implemented ? Sincerely, -- Fred Pedrisa

4 7

Large number of defunct shell processes
by Peter Loron 09 Jul '15

09 Jul '15

Hello. We're running Pro build 6606 on an Ubuntu 14.04 machine. I'm consistently seeing large (>100) numbers of defunct processes lingering on the box. E.g.: ... www-data 31956 32711 0 14:09 ? 00:00:00 [sh] <defunct> www-data 32623 17403 0 11:37 ? 00:00:00 [sh] <defunct> www-data 32641 23519 0 11:37 ? 00:00:00 [sh] <defunct> www-data 32661 23519 0 11:37 ? 00:00:00 [sh] <defunct> Can anybody shed some light on why these are hanging around and what to do? They're causing our system monitoring to make grumpy noises... Thanks! -Pete

1 0

Infiniband adapter on linux hosts
by Louis Bailleul 09 Jul '15

09 Jul '15

Hi all, I would like to know if any of you have been able to monitor Infiniband traffic on Linux hosts with Observium. I have added some nodes with Mellanox cards (MT27500 [ConnectX-3]) to Observium but it seems to see them only when they are configured for Ethernet traffic. I have no issue monitoring Infiniband switches (mostly Mellanox SX6012 ) but is there a way to display Infiniband traffic from a Linux box in Observium ? Best regards, Louis

3 3

Re: [Observium] observium Digest, Vol 60, Issue 60
by Johnston, Tom 09 Jul '15

09 Jul '15

SNMPWALK Results IF-MIB::ifIndex.10201 = INTEGER: 10201 IF-MIB::ifDescr.10201 = STRING: TenGigabitEthernet1/0/1 IF-MIB::ifType.10201 = INTEGER: ethernetCsmacd(6) IF-MIB::ifMtu.10201 = INTEGER: 1500 IF-MIB::ifSpeed.10201 = Gauge32: 4294967295 IF-MIB::ifPhysAddress.10201 = STRING: 6c:fa:89:be:6f:33 IF-MIB::ifAdminStatus.10201 = INTEGER: up(1) IF-MIB::ifOperStatus.10201 = INTEGER: up(1) IF-MIB::ifLastChange.10201 = Timeticks: (242331654) 28 days, 1:08:36.54 IF-MIB::ifInOctets.10201 = Counter32: 1241992353 IF-MIB::ifInUcastPkts.10201 = Counter32: 2194606 IF-MIB::ifInDiscards.10201 = Counter32: 0 IF-MIB::ifInErrors.10201 = Counter32: 9 IF-MIB::ifInUnknownProtos.10201 = Counter32: 0 IF-MIB::ifOutOctets.10201 = Counter32: 573439732 IF-MIB::ifOutUcastPkts.10201 = Counter32: 2121442 IF-MIB::ifOutDiscards.10201 = Counter32: 0 IF-MIB::ifOutErrors.10201 = Counter32: 0 On 7/9/15, 12:57 PM, "observium on behalf of observium-request(a)observium.org" <observium-bounces(a)observium.org on behalf of observium-request(a)observium.org> wrote: >Send observium mailing list submissions to > observium(a)observium.org > >To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > >You can reach the person managing the list at > observium-owner(a)observium.org > >When replying, please edit your Subject line so it is more specific >than "Re: Contents of observium digest..." > > >Today's Topics: > > 1. Re: Dual Purpose Interface (Adam Armstrong) > > >---------------------------------------------------------------------- > >Message: 1 >Date: Thu, 09 Jul 2015 18:57:51 +0100 >From: "Adam Armstrong" <adama(a)memetic.org> >To: "" <observium(a)observium.org> >Subject: Re: [Observium] Dual Purpose Interface >Message-ID: <aa1633e8-1384-4647-81bf-b7ee2cc4075a(a)getmailbird.com> >Content-Type: text/plain; charset="utf-8" > >It seems this device is /also/ not returning correct data for these ports. You won't get very far with 32bit counters on a TE port :) > >Check what it's reporting via SNMP. It's likely not really anything to do with us. > >adam. > >Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&ut…] >On 09/07/2015 14:21:04, Johnston, Tom <tom.johnston(a)edinaschools.org> wrote: >2960X switches and newer styles of switches have dual speed SFP slots. On my 2960X I have switched from 1GIG SFP to a 10GIG SFP. > >This changes the ports from GigabitEthernet to TenGigabitEthernet. > >In the switch config now the GigabitEthernet ports are gone (they get removed from running config) and now TenGigabit Ports are present and in use. > > >Observium still shows both types of interfaces present, and there is none to delete under ports. It also doesn?t show that the TenGig port is up even though it is up. Whats the best way to handle this? Delete/re-add switch? > >Te1/0/1 ? ? ? ? ? ? ? ? ? ? ?connected ? ?trunk ? ? ? ?full ? ?10G SFP-10GBase-LRM (was the gigabit 1/0/49) >Te1/0/2 ? ? ? ? ? ? ? ? ? ? ?notconnect ? 1 ? ? ? ? ? ?full ? ?10G Not Present (was the gigabit 1/0/50) >Po2 ? ? ? VV-6504 ? ? ? ? ? ?notconnect ? 1 ? ? ? ? ? ?auto ? auto >Fa0 ? ? ? ? ? ? ? ? ? ? ? ? ?disabled ? ? routed ? ? ? auto ? auto 10/100BaseTX >VV-IDF3-2960X01# > >10149 GigabitEthernet1/0/49 >VV-6504 G4/8 Ethernet >enabled?/?down >No?Yes >No?Yes >64bit >10150 GigabitEthernet1/0/50 >VV-6504 G4/9 Ethernet >enabled?/?down >No?Yes >No?Yes >64bit >10201 TenGigabitEthernet1/0/1 >Ethernet >enabled?/?down >No?Yes >No?Yes >32bit >10202 TenGigabitEthernet1/0/2 >Ethernet >enabled?/?down >No?Yes >No?Yes >32bit >Thanks in advance > > > > >Thanks in advance >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: <http://postman.memetic.org/pipermail/observium/attachments/20150709/b061776…> > >------------------------------ > >Subject: Digest Footer > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > >------------------------------ > >End of observium Digest, Vol 60, Issue 60 >*****************************************

2 1

Re: [Observium] observium Digest, Vol 60, Issue 59
by Johnston, Tom 09 Jul '15

09 Jul '15

Here is the results of the SNMPWalk. IF-MIB::ifIndex.107 = INTEGER: 107 IF-MIB::ifDescr.107 = STRING: TenGigabitEthernet2/1 IF-MIB::ifType.107 = INTEGER: ethernetCsmacd(6) IF-MIB::ifMtu.107 = INTEGER: 1500 IF-MIB::ifSpeed.107 = Gauge32: 4294967295 IF-MIB::ifPhysAddress.107 = STRING: 64:0:f1:ee:7c:0 IF-MIB::ifAdminStatus.107 = INTEGER: down(2) IF-MIB::ifOperStatus.107 = INTEGER: down(2) IF-MIB::ifLastChange.38 = Timeticks: (210732797) 24 days, 9:22:07.97 IF-MIB::ifLastChange.40 = Timeticks: (210732614) 24 days, 9:22:06.14 IF-MIB::ifLastChange.107 = Timeticks: (512227871) 59 days, 6:51:18.71 IF-MIB::ifInOctets.107 = Counter32: 0 IF-MIB::ifInUcastPkts.79 = Counter32: 3401610701 IF-MIB::ifInUcastPkts.107 = Counter32: 0 IF-MIB::ifInNUcastPkts.107 = Counter32: 0 IF-MIB::ifInDiscards.107 = Counter32: 0 IF-MIB::ifInErrors.107 = Counter32: 0 IF-MIB::ifInUnknownProtos.107 = Counter32: 0 IF-MIB::ifOutOctets.25 = Counter32: 2792331074 IF-MIB::ifOutOctets.107 = Counter32: 0 IF-MIB::ifOutUcastPkts.107 = Counter32: 0 IF-MIB::ifOutNUcastPkts.107 = Counter32: 0 IF-MIB::ifOutDiscards.107 = Counter32: 0 IF-MIB::ifOutErrors.107 = Counter32: 0 Thomas Johnston Network Administrator Edina Public Schools P: 952-848-4991 <tel:952-848-4991> On 7/9/15, 12:53 PM, "observium on behalf of observium-request(a)observium.org" <observium-bounces(a)observium.org on behalf of observium-request(a)observium.org> wrote: >Send observium mailing list submissions to > observium(a)observium.org > >To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > >You can reach the person managing the list at > observium-owner(a)observium.org > >When replying, please edit your Subject line so it is more specific >than "Re: Contents of observium digest..." > > >Today's Topics: > > 1. Re: Configuring map interface on new observium installation > (Milton Ngan) > 2. Re: New 6500-E Module (Adam Armstrong) > > >---------------------------------------------------------------------- > >Message: 1 >Date: Thu, 9 Jul 2015 17:15:45 +0000 >From: Milton Ngan <milton(a)valvesoftware.com> >To: Observium Network Observation System <observium(a)observium.org> >Subject: Re: [Observium] Configuring map interface on new observium > installation >Message-ID: <8D53F2A3-02D4-467F-B1D2-1467828C19E3(a)valvesoftware.com> >Content-Type: text/plain; charset="utf-8" > >The location_map maps the string retrieved from the sysLocation value of your devices and maps it to a location that can be geolocated via Google or Mapquest. > >This is useful if you have special location names which cannot be geolocated, or your device doesn?t support strings long enough to enter in the full address. It doesn?t map the device name to a location which it looks like what you are trying to do. Try configuring the devices? SNMP sysLocation with the string you have and it should work. > > > >From: observium on behalf of Andi Qirjazi >Reply-To: Observium Network Observation System >Date: Thursday, July 9, 2015 at 8:11 AM >To: Observium Network Observation System >Subject: Re: [Observium] Configuring map interface on new observium installation > >Hi, > >Sorry, this I didn't get it. Should be same location_map for both devices? > >Thanks, >Andi > > >On Thu, Jul 9, 2015 at 4:55 PM, Tom Laermans <tom.laermans(a)powersource.cx<mailto:tom.laermans@powersource.cx>> wrote: >Hi, > >The location_map maps locations from one to the other, it's not meant for specific devices, unless you have Device1 as location set for some devices... > >If you want to override a single device's location, go to the device properties and set it there. > >Tom > > >On 2015-07-09 16:53, Andi Qirjazi wrote: >Hi Rudolf, > >Yes, I'm still having problems. The Map shows only the green button in Atlantic ocean. >I have the following sysLocation at config file for each device: > >$config['location_map']['Device1']="HQ, Berlin, DE"; >$config['location_map']['Device2']="HQ, Rome, IT"; > >Please, correct me if I'm wrong. > >Thanks, >Andi > > >On Thu, Jul 9, 2015 at 1:30 PM, Rudolf Hoehler <rudolf(a)saicomvoice.co.za<mailto:rudolf@saicomvoice.co.za>> wrote: >Hello Andi, > >Are you still having the problem? What is the sysLocation string that you use? > >Rudolf > >From: Andi Qirjazi <aqirjazi(a)gmail.com<mailto:aqirjazi@gmail.com>> >Reply-To: "observium(a)observium.org<mailto:observium@observium.org>" <observium(a)observium.org<mailto:observium@observium.org>> >Date: Tuesday 07 July 2015 at 17:14 >To: "observium(a)observium.org<mailto:observium@observium.org>" <observium(a)observium.org<mailto:observium@observium.org>> >Subject: [Observium] Configuring map interface on new observium installation > >Hi, > >I have just installed & configured observium for the first time. The first two devices are added and seems working, but I'm having problem displaying these devices on the map. All the time there is a blue sign on the middle on Atlantic ocean, it doesn't matter what I configure as device location. > >Please any idea how to configure the map? >I have tried all the possible configurations at /opt/observium/config.php settings but with no success. >This installation is behind a proxy server, but I have allowed all the traffic from observium host and I don't see any traffic from this host towards proxy server. > >I did the following configuration on monitored devices for SNMP settings as follow: > >R_TR#sh run | s snmp >snmp-server community aaaaaaa RO >snmp-server ifindex persist >snmp-server location Berlin, DE >snmp-server contact bbbbbbbbbb > >at Observium main page, at location tab, is listed Berlin, DE (or Rome, IT another device) but no indication on the map for both devices. > >regarding proxy server configuration, at \opt\observium\config.php file I have the following settings: >//configure proxy server settings >$config['http proxy'] = "myproxy:8080"; >with no username and password, because I have allowed all the traffic from observium host and it has internet access, because I did manually update and it worked normally. > >Please could you send me a sample of a working map configuration? > >I have the following configuration regarding geolocation at config.php file: > > >// $config['frontpage']['map']['region'] = "https://developers.google.com/chart/interactive/docs/gall$ >$config['geocoding']['enable'] =TRUE; >$config['geocoding']['dns'] = FALSE; >$config['location_menu_geocoded'] = FALSE; >$config['geocoding']['api'] = 'www.googleapis.com/geolocation/v1/geolocate?key=aaaaaaaaaaaaaaaaaaaaa<http://www.googleapis.com/geolocation/v1/geolocate?key=aaaaaaaaaaaaaaaaaaaaa>'; > >I even tried with just 'google' as API, but it doesn't change anything. > >thanks in advance, >Andi Qirjazi > >_______________________________________________ >observium mailing list >observium(a)observium.org<mailto:observium@observium.org> >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > > >_______________________________________________ >observium mailing list >observium(a)observium.org<mailto:observium@observium.org>http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > >_______________________________________________ >observium mailing list >observium(a)observium.org<mailto:observium@observium.org> >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: <http://postman.memetic.org/pipermail/observium/attachments/20150709/8be1908…> > >------------------------------ > >Message: 2 >Date: Thu, 09 Jul 2015 18:54:06 +0100 >From: "Adam Armstrong" <adama(a)memetic.org> >To: "" <observium(a)observium.org> >Subject: Re: [Observium] New 6500-E Module >Message-ID: <4291bb7e-0f3d-43fa-80f8-4bc9fe010248(a)getmailbird.com> >Content-Type: text/plain; charset="utf-8" > >It's likely that your device isn't returning correct counters for this linecard's ports. > >Typical 6500 OIR :) > >Check what it's returning for this port in SNMP > >snmpbulkwalk -v2c -c <community> <hostname> ifEntry | grep \.107 > >adam. > >Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&ut…] >... >On 09/07/2015 18:15:44, Johnston, Tom <tom.johnston(a)edinaschools.org> wrote: >After adding a new 6500 module to multiple Cisco 6504-E (added WS-6816-10G) the module shows up in Observium after being polled as expected. > >The issue is the module isn?t being updated. Ports that are up are showing as disable/down it is also not drawing graphs as its not seeing it as up. > >The port is actually up and passing traffic but that is not being reflected in Observium. ?The only thing that fixes this is deleting/re-adding the device. I assume there is a more appropriate way to fix this. >------------------------------------------------ >Debug shows the following:? > >PERMISSIONS CHECK. Entity type: port, Entity ID: 92959, Device ID: 91, Allowed: TRUE. > >This is under Settings > Ports (Port Properties) >Port specifics are here > >$port/opt/observium/html/pages/device/port/data.inc.php:17 >array(71 >port_id => 92959 >device_id => 91 >port_64bit => 1 >port_label => TenGigabitEthernet2/1 >port_label_base => null >port_label_num => null >port_label_short => Te2/1 >port_descr_type => null >port_descr_descr => null >port_descr_circuit => null >port_descr_speed => null >port_descr_notes => null >ifDescr => TenGigabitEthernet2/1 >ifName => Te2/1 >portName => null >ifIndex => 107 >ifSpeed => 10000000000 >ifConnectorPresent => true >ifPromiscuousMode => false >ifHighSpeed => 10000 >ifOperStatus => down >ifAdminStatus => down >ifDuplex => fullDuplex >ifMtu => 1500 >ifType => ethernetCsmacd >ifAlias => Test >ifPhysAddress => 6400f1ee7c00 >ifHardType => null >ifLastChange => 2014-02-27 07:40:53 >date-1yr America/Chicago (UTC-5) >ifVlan => null >ifTrunk => null >ifVrf => null >ignore => 0 >disabled => 0 >detailed => 0 >deleted => 0 >pagpOperationMode => null >pagpPortState => null >pagpPartnerDeviceId => null >pagpPartnerLearnMethod => null >pagpPartnerIfIndex => null >pagpPartnerGroupIfIndex => null >pagpPartnerDeviceName => null >pagpEthcOperationMode => null >pagpDeviceId => null >pagpGroupIfIndex => null >ifInUcastPkts => 0 >ifInUcastPkts_delta => 0 >ifInUcastPkts_rate => 0 >ifOutUcastPkts => 0 >ifOutUcastPkts_delta => 0 >ifOutUcastPkts_rate => 0 >ifInErrors => 0 >ifInErrors_delta => 0 >ifInErrors_rate => 0 >ifOutErrors => 0 >ifOutErrors_delta => 0 >ifOutErrors_rate => 0 >ifOctets_rate => 0 >ifUcastPkts_rate => 0 >ifErrors_rate => 0 >ifInOctets => 0 >ifInOctets_delta => 0 >ifInOctets_rate => 0 >ifOutOctets => 0 >ifOutOctets_delta => 0 >ifOutOctets_rate => 0 >ifInOctets_perc => 0 >ifOutOctets_perc => 0 >poll_time => 1436461953 >poll_period => 237 >) > >Observium 0.15.7.6608 > >I?m running across multiple issues I haven?t encountered yet today so sorry for so many questions. > > > >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: <http://postman.memetic.org/pipermail/observium/attachments/20150709/83173dc…> > >------------------------------ > >Subject: Digest Footer > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > >------------------------------ > >End of observium Digest, Vol 60, Issue 59 >*****************************************

2 1

Dual Purpose Interface
by Johnston, Tom 09 Jul '15

09 Jul '15

2960X switches and newer styles of switches have dual speed SFP slots. On my 2960X I have switched from 1GIG SFP to a 10GIG SFP. This changes the ports from GigabitEthernet to TenGigabitEthernet. In the switch config now the GigabitEthernet ports are gone (they get removed from running config) and now TenGigabit Ports are present and in use. Observium still shows both types of interfaces present, and there is none to delete under ports. It also doesn’t show that the TenGig port is up even though it is up. Whats the best way to handle this? Delete/re-add switch? Te1/0/1 connected trunk full 10G SFP-10GBase-LRM (was the gigabit 1/0/49) Te1/0/2 notconnect 1 full 10G Not Present (was the gigabit 1/0/50) Po2 VV-6504 notconnect 1 auto auto Fa0 disabled routed auto auto 10/100BaseTX VV-IDF3-2960X01# 10149 GigabitEthernet1/0/49 VV-6504 G4/8 Ethernet enabled / down No Yes No Yes 64bit 10150 GigabitEthernet1/0/50 VV-6504 G4/9 Ethernet enabled / down No Yes No Yes 64bit 10201 TenGigabitEthernet1/0/1 Ethernet enabled / down No Yes No Yes 32bit 10202 TenGigabitEthernet1/0/2 Ethernet enabled / down No Yes No Yes 32bit Thanks in advance Thanks in advance

2 1

New 6500-E Module
by Johnston, Tom 09 Jul '15

09 Jul '15

After adding a new 6500 module to multiple Cisco 6504-E (added WS-6816-10G) the module shows up in Observium after being polled as expected. The issue is the module isn’t being updated. Ports that are up are showing as disable/down it is also not drawing graphs as its not seeing it as up. The port is actually up and passing traffic but that is not being reflected in Observium. The only thing that fixes this is deleting/re-adding the device. I assume there is a more appropriate way to fix this. ------------------------------------------------ Debug shows the following: PERMISSIONS CHECK. Entity type: port, Entity ID: 92959, Device ID: 91, Allowed: TRUE. This is under Settings > Ports (Port Properties) [cid:69B8A256-5622-4D4D-BC96-28A8465ECDBF] Port specifics are here $port/opt/observium/html/pages/device/port/data.inc.php:17 array(71 port_id => 92959 device_id => 91 port_64bit => 1 port_label => TenGigabitEthernet2/1 port_label_base => null port_label_num => null port_label_short => Te2/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => TenGigabitEthernet2/1 ifName => Te2/1 portName => null ifIndex => 107 ifSpeed => 10000000000 ifConnectorPresent => true ifPromiscuousMode => false ifHighSpeed => 10000 ifOperStatus => down ifAdminStatus => down ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => Test ifPhysAddress => 6400f1ee7c00 ifHardType => null ifLastChange => 2014-02-27 07:40:53 date-1yr America/Chicago (UTC-5) ifVlan => null ifTrunk => null ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 0 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 0 ifInOctets_delta => 0 ifInOctets_rate => 0 ifOutOctets => 0 ifOutOctets_delta => 0 ifOutOctets_rate => 0 ifInOctets_perc => 0 ifOutOctets_perc => 0 poll_time => 1436461953 poll_period => 237 ) Observium 0.15.7.6608 I’m running across multiple issues I haven’t encountered yet today so sorry for so many questions.

2 1

Mailing List
by Johnston, Tom 09 Jul '15

09 Jul '15

The online mailing list isn’t showing any updates since 2015/06/27 if I sort by date. Shouldn’t there be more content? I’m Looking at messages sorted by date for this information. Most recent I see: * 2015/06/27 Re: [Observium] Installing JpGraph blanks out bills page<https://www.mail-archive.com/observium@observium.org/msg09849.html> Rudolf Hoehler * 2015/06/27 Re: [Observium] Installing JpGraph blanks out bills page<https://www.mail-archive.com/observium@observium.org/msg09848.html> Adam Armstrong * 2015/06/27 [Observium] Installing JpGraph blanks out bills page<https://www.mail-archive.com/observium@observium.org/msg09847.html> Rudolf Hoehler * 2015/06/26 Re: [Observium] alerts<https://www.mail-archive.com/observium@observium.org/msg09846.html> Jeffrey d'Ambly * 2015/06/26 Re: [Observium] alerts<https://www.mail-archive.com/observium@observium.org/msg09845.html> Jeffrey d'Ambly Thomas Johnston Network Administrator Edina Public Schools P: 952-848-4991<tel:952-848-4991>

1 0

Smokeping tab missing from Observium
by Nate Mellendorf 08 Jul '15

08 Jul '15

Observium team and community, My apologies if this has been pointed out, but I didn't see it in the most recent e-mails for the mailing list. We're running 0.15.7.6605 of Observium, and our smokeping tab has recently disappeared. We could rollback to see what version it vanished from, but I wanted to reach out first. Image: Config.php: // Smokeping config $config['smokeping']['dir'] = "/core2/smokeping/"; Has anyone else experienced this issue? Thank you.

2 1

Unsubscribing from the observium (and many other) mailing list(s) 101 (WAS: RE: Auto Discovery/Automate adding devices.)
by Phillip Baker 08 Jul '15

08 Jul '15

Dear today's person who asked to be unsubscribed from a mailing list that has an unsubscribe function baked into it, Don't be that guy, guy. Here's a handy dandy guide for you and everyone else who's brain is gradually formulating a thought about this topic, before we get another raft of "I TOO WOULD LIKE TO BE UNSUBSCRIBED FROM RECEIVING THESE MESSAGES IN MY COMPUSERVE I DO NOT WANT ANY VIAGRA" emails like last time this happened. Q1: Have you *tried* to unsubscribe yourself? If no: There's a link at the bottom of every email you've received from this list (hint: http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ), and at the bottom of the page that results from clicking on that link is a section that you will likely find relevant to your interests. Like most sane/legitimate mailing lists, the List-Unsubscribe header is also set in the mail headers of every message you receive via this mailing list: List-Unsubscribe: <http://postman.memetic.org/cgi-bin/mailman/options/observium> - which takes you to a specific unsubscribe page. If you don't know your mailman password, reset it. The button to do that, is like, right there, maaaaan. If yes: Proceed to Q2, brave traveller. Steel yourself, the next step possibly requires reading message headers. Grab a Snickers (DISCLAIMER: Ask your doctor if Snickers is right for you). Q2: Have you checked you're trying to unsubscribe the address you actually are receiving mail for? Perhaps you're receiving mail for an alias rather than your pimary mailbox address? The message headers should tell you what this is if you can't see it any other way (look for "for <email(a)address.org>" in a "Received:" header close to you). If no: Check, and if necessary, unsubscribe again, but with the right address this time. If yes: Congratulations! You are possibly a special snowflake and possibly have an actual problem that possibly requires someone else's help, possibly, and you should have provided all this information up front to prevent being ridiculed... except you're still telling a bunch of people who can do nothing to help you. Mail the list administrator directly (who's contact email you can find on the above mentioned pages) telling them what you've tried to do, and what the email address is that is receiving the mails from the list, and then they can help you. Adam loves to help. It's practically his middle name. By now, you have now successfully unsubscribed from a mailing list.. unless Adam doesn't like you and is keeping you on the list just to torment you for some sick twisted reason (less common than you might think). A+ super great job! I'm just going to leave these here, from the thread you replied to, to make a point of some sort: > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium YES, I *HAVE* HAD A VERY ANNOYING DAY TODAY, WHY DO YOU ASK?

1 0

Auto Discovery/Automate adding devices.
by Rudolf Hoehler 08 Jul '15

08 Jul '15

Hello Team, Please can you assist me with the auto discovery. It's not working... :) I read in a mailing list archive dated Nov 2014, that it actually doesn't work? Is this still the case? Can I write my own script that adds devices from the backend? Should I use an API call or can I insert into the database directly? Further to that, 1. What happens if I try to add the same device again? Thinking from an automated system, the same hostname might have multiple interfaces that it is reachable on? 2. What happens if we change a device's host name - does observium create a new device? What is best practice when administering the system wrt device swop outs or hostname changes? Regards, Rudolf

5 6

Interface ifAlias change at every poll
by Nick Ryce 08 Jul '15

08 Jul '15

2 3

Forbidden Access Permissen Ubuntu 14.04.
by Florian Schnelle 08 Jul '15

08 Jul '15

Hi everyone, I can´t access our new test installation. I don’t have any Apache knowledge and I guess that´s where the problem lays. I tried to create a vHost, as well as I tried to follow the instructions from the how to page regarding /etc/apache2/sites-available/default <Directory /opt/observium/html/> Options Indexes FollowSymLinks MultiViews AllowOverride All Require all granted </Directory> Without any success. Help would be highly appreciated. Thanks and regards, Flo

3 5

Re: [Observium] observium Digest, Vol 60, Issue 37
by Mathias Giroud 08 Jul '15

08 Jul '15

Hello, Can you help me for this integration ? https://gist.github.com/arekinath/3384869 Cordialement, GIROUD Mathias Tél.: +41 (0)27 519 00 46 Email: hello <mailto:hello@giroudmathias.ch> <mailto:marketing@giroudmathias.ch>@giroudmathias.ch <mailto:hello@giroudmathias.ch> Site: www.giroudmathias.ch <http://giroudmathias.ch/> This e-mail (including any attached documents) is intended for the named recipient(s) only. If you are not the intended recipient, we kindly ask you not to review, retain, copy or distribute this message, and we ask you to notify the sender by reply e-mail immediately and delete this message from your system. Thank you. Le 07.07.15 13:00, « observium au nom de observium-request(a)observium.org » <observium-bounces(a)observium.org au nom de observium-request(a)observium.org> a écrit : >Send observium mailing list submissions to > observium(a)observium.org > >To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > >You can reach the person managing the list at > observium-owner(a)observium.org > >When replying, please edit your Subject line so it is more specific >than "Re: Contents of observium digest..." > > >Today's Topics: > > 1. Re: mysql_fetch_array replacement? (Robert Williams) > > >---------------------------------------------------------------------- > >Message: 1 >Date: Mon, 6 Jul 2015 11:50:29 +0000 >From: Robert Williams <Robert(a)CustodianDC.com> >To: "observium(a)observium.org" <observium(a)observium.org> >Subject: Re: [Observium] mysql_fetch_array replacement? >Message-ID: <fc447724ec8b486bb68bf179682629ea(a)CDC-EX2.cdc.local> >Content-Type: text/plain; charset="utf-8" > >Thanks guys, didn?t realise it was a php function ? > >Interestingly there were no errors at all, just a zero output from the function, which didn?t help! > >Anyway, the solution was indeed from the example given on here: > >foreach(dbFetchRows("SELECT hostname FROM `devices` WHERE `disabled`=0 ORDER BY hostname") as $data) > >(Then the rest of the original code) > >So cheers for that! > > >Robert Williams >Custodian Data Centre >Email: Robert(a)CustodianDC.com >http://www.CustodianDC.com >From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong >Sent: 05 July 2015 18:54 >To: observium(a)observium.org >Subject: Re: [Observium] mysql_fetch_array replacement? > >I expect he's now using mysqli_* via the config option, which means mysql_* is no longer connected to a database :) > >adam. > >Sent from Mailbird<http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campai…> > >On 05/07/2015 18:43:14, Phillip Baker <phil(a)lchost.co.uk> wrote: >In fact, I?d be surprised if mysql_query is working if you?ve switched Observium to mysqli. What?s the actual error output of the script when you run it? > >Phil > >From: observium [mailto:observium-bounces@observium.org] On Behalf Of Robert Williams >Sent: 05 July 2015 13:51 >To: Observium Network Observation System (observium(a)observium.org) >Subject: [Observium] mysql_fetch_array replacement? > >Hi, > >After the SVN up on the 18th July the script we use for generating the Smokeping targets stopped producing any data (the list of slightly reformatted hostnames). The script itself was taken from this mailing list about 2 years ago and is as follows: > >#!/usr/bin/env php ><?php > >include("/opt/observium/includes/defaults.inc.php"); >include("/opt/observium/config.php"); >include("/opt/observium/includes/definitions.inc.php"); >include("/opt/observium/includes/functions.php"); > >echo "*** Targets ***\n\nprobe = FPing\n\nmenu = Top\ntitle = Network Latency Grapher\nremark = Welcome to SmokePing\n\n"; > >$query = mysql_query("SELECT hostname FROM `devices` WHERE `disabled`=0 ORDER BY hostname"); > >while ($data = mysql_fetch_array($query)) { > $hostid = str_replace(".","_",$data['hostname']); > $hostname = $data['hostname']; > echo "+ $hostid\n\nhost = $hostname\n\n"; >} > >?> > >I can see that /includes/functions.php no longer exists but it?s replacement in functions.inc.php does not appear to have a function for mysql_fetch_array(). > >So my question is, can someone point me to the correct replacement function for this? I?ve had a look through it and can?t see what I?m looking for, but PHP is not my ?thing? so I?m missing it. > >Any assistance appreciated! > >Robert Williams >Custodian Data Centre >Email: Robert(a)CustodianDC.com<mailto:Robert@CustodianDC.com> >http://www.CustodianDC.com >

2 1

Device Alerts on the Frontpage
by Aaron Hite 07 Jul '15

07 Jul '15

Guys, I have a question regarding alerts showing up on the frontpage. I have alerts coming to me via email when I have a alert checker looking at the memory going above 50% (testing this operation). But on the frontpage I do not see this show up in either the status boxes or under the device alerts section. I search around and can not find anything that I changed that would prevent this from showing up on the frontpage. I am sure I did something, but just not sure what? Any pointers or direction to start looking would be appreciated. Thanks, Aaron

2 5

Linux Memory Alerts
by Jason LeBlanc 07 Jul '15

07 Jul '15

Hi all, We're running PE 0.15.7.6539, it seems no matter what I set thresholds for on memory utilization for cached (I can ignore this..) and physical memory. I can look at the graphs and set thresholds to 90-95% and always get alarms. Any ideas or advice? Jason LeBlanc IT Consultant Direct: 678-387-5529 | Cell: 954-461-6492 [CTG-logo-TAG-COLOR] 2030 Powers Ferry Road SE | Suite 130 | Atlanta, GA 30339 Main: 404.352.3000 | Fax: 404.352.2962 | www.ctgatlanta.com

2 2

virtual hosts stats
by Patrick Marquetecken 07 Jul '15

07 Jul '15

All, Is it possible to display traffic for several hosts ? Now I can see only the compete traffic for the http service, I would like to see the traffic for each virtual host. Or give me some pointers to get me on the way, BTW i’m not a programmer only a system engineer. Thanks

3 3

Support
by Dave Bats 07 Jul '15

07 Jul '15

Dear Observium Team,, We need your support on this, we try to install MIB's from Eltek(power supply tool) in Observium. We did receive the MIB's from Eltek. After install the MIB's and reboot we see that the system is trying to Read the Eltek MIB's but we see that OID's in the system are not recognized. Is there a way how we can solve this problem, do we need to add some script in Observium to make it work? You support is more than welcome! Kind Regards, Dave Bats

2 3

mysql_fetch_array replacement?
by Robert Williams 06 Jul '15

06 Jul '15

Hi, After the SVN up on the 18th July the script we use for generating the Smokeping targets stopped producing any data (the list of slightly reformatted hostnames). The script itself was taken from this mailing list about 2 years ago and is as follows: #!/usr/bin/env php <?php include("/opt/observium/includes/defaults.inc.php"); include("/opt/observium/config.php"); include("/opt/observium/includes/definitions.inc.php"); include("/opt/observium/includes/functions.php"); echo "*** Targets ***\n\nprobe = FPing\n\nmenu = Top\ntitle = Network Latency Grapher\nremark = Welcome to SmokePing\n\n"; $query = mysql_query("SELECT hostname FROM `devices` WHERE `disabled`=0 ORDER BY hostname"); while ($data = mysql_fetch_array($query)) { $hostid = str_replace(".","_",$data['hostname']); $hostname = $data['hostname']; echo "+ $hostid\n\nhost = $hostname\n\n"; } ?> I can see that /includes/functions.php no longer exists but it’s replacement in functions.inc.php does not appear to have a function for mysql_fetch_array(). So my question is, can someone point me to the correct replacement function for this? I’ve had a look through it and can’t see what I’m looking for, but PHP is not my ‘thing’ so I’m missing it. Any assistance appreciated! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

4 6

Access to Alerts
by Andrew Colin 06 Jul '15

06 Jul '15

Hi Guys Is there a way to give a user that has "normal user" Level access to view their event logs as currently it doesn't allow. Kind Regards Andrew Colin Converged Telecoms (Pty) Ltd. Licensed Telecoms Operator : (0258/IECS/JAN/09) (0258/IECNS/JAN/09) Switchboard: +27 (0)10 591 4600 Email: <mailto:andrew@convergedgroup.net> andrew(a)convergedgroup.net Web: http://www.convergedgroup.net 75 Witkoppen Road, Northriding, Johannesburg, 2169 P O Box 7246, Weltevredenpark, 1715 This communication is confidential and intended solely for the addressee(s). Any unauthorized review, use, disclosure or distribution is prohibited. If you believe this message has been sent to you in error, please notify the sender by replying to this transmission and delete the message without disclosing it. Thank you.E-mail including attachments is susceptible to data corruption, interception, unauthorized amendment, tampering and viruses, and we only send and receive emails on the basis that we are not liable for any such corruption, interception, amendment, tampering or viruses or any consequences thereof.

1 0

DD-WRT question
by Roland Hill 06 Jul '15

06 Jul '15

Hi, I run Observium on my home network, so appreciate the CE Edition (CE 0.15.6.6430). I have 2 dd-wrt based switches, and I remember when they were first discovered by Observium quite a while back, they displayed a dd-wrt logo on the device list. This hasn't occurred for a while now, and I just was interested to know if it is possible for this to happen? Screen shots attached fyi (hopefully they won't get stripped). This is a very minor question (hope the "noise is okay"), but if anyone has an answer I'd appreciate it. -- Regards, Roland Hill

3 7

Re: [Observium] potential purchase issue
by Adam Armstrong 03 Jul '15

03 Jul '15

Hi Andy, It seems sometimes the payment processor is a tiny bit slow at sending us subscription creation events. It is all automated, though! Usually on a Friday, too! Thanks, Adam. On 3 Jul 2015 11:28, "Franks Andy (IT Technical Architecture Manager)" <Andy.Franks(a)sath.nhs.uk> wrote: > > Hi All, > > The subs are showing now, not sure if someone tweaked something somewhere. Still no email but thanks. > > Thanks > > Andy > > > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Franks Andy (IT Technical Architecture Manager) > Sent: 03 July 2015 10:39 > To: 'observium(a)observium.org' > Subject: [Observium] potential purchase issue > > > > Hi all, > > Who would I speak to about not having purchase confirmation come back from the paddle purchasing screen? > > I fought for ages to get my boss to approve of the spend and the hospital actually got a credit card in line with the requirements for the site. Now we’ve paid for the subs, got the big green tick under the hamster logo in the payment processing screen, but then after dropping back to the subs screen in the account area, it says we have no paid subscription. I also haven’t received an email yet, and it’s been a while. > > I am concerned! > > Thanks > > Andy Franks. > > > > > >

1 0

Scaling adjustment for UPS sensors
by Robert Williams 03 Jul '15

03 Jul '15

Hi, Is there a way to adjust the re-scaling for auxiliary UPS sensors? We’ve just been given some external sensors for our Riello units to play with; and whilst Observium can indeed see them, their temperatures are out by one decimal place: [cid:image001.png@01D0B4D2.A73E1560] (it should be 19.5C, obviously) The RH is fine interestingly, and this is only affecting the ‘external’ sensors in the NetMan card, not the built-in sensor. Interestingly, Riello also give out the ‘chassis’ temperature under the ‘battery’ temperature OID, which is why it shows our batteries as 27 degrees, they are not - and this is not Observium’s fault ☺ Anyway, is there a manual ‘tweak’ to correct the scaling for the temperature? Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

4 12

Re: [Observium] ifSpeed/ifHighSpeed messages - HP C7000 Virtual Connect
by Oesterlin, Robert 03 Jul '15

03 Jul '15

We saw the same thing when we tested SolarWinds, so it’s definitely on the HP side. Pending me to get HP to actually fix the bug, can you think of a way I can suppress these messages, either filtering them out or limiting the SNMP response? Of course I can always tweak the code, but that’s a last resort option. Bob Oesterlin Sr Storage Engineer, Nuance Communications 507-269-0413

2 2

ifSpeed/ifHighSpeed messages - HP C7000 Virtual Connect
by Oesterlin, Robert 03 Jul '15

03 Jul '15

We recently installed Observium and we’re receiving messages from the majority of our C7000 Virtual connects in the event log that look like this: 2015-07-03 06:28:32 lag27 Interface changed: [ifSpeed] 10000000000 -> 40000000000; [ifHighSpeed] 10000 -> 40000 2015-07-03 06:23:31 lag27 Interface changed: [ifSpeed] 40000000000 -> 10000000000; [ifHighSpeed] 40000 -> 10000 2015-07-02 23:58:34 lag27 Interface changed: [ifSpeed] 10000000000 -> 40000000000; [ifHighSpeed] 10000 -> 40000 2015-07-02 23:53:38 lag27 Interface changed: [ifSpeed] 40000000000 -> 10000000000; [ifHighSpeed] 40000 -> 10000 These VC’s have a 4 port LACP group to the core switch. I see nothing in the system log on either side that would indicate the interface speed is actually changing (link downs, errors) or other SNMP errors, so I’m inclined to think these message can be ignored. Any thoughts? If it’s a bug in the HP SNMP implementation on the VC’s I can submit a ticket. Otherwise I’d like to find a way to suppress them if I can. Bob Oesterlin Sr Storage Engineer, Nuance Communications 507-269-0413

2 1

Re: [Observium] potential purchase issue
by Franks Andy (IT Technical Architecture Manager) 03 Jul '15

03 Jul '15

Hi All, The subs are showing now, not sure if someone tweaked something somewhere. Still no email but thanks. Thanks Andy From: observium [mailto:observium-bounces@observium.org] On Behalf Of Franks Andy (IT Technical Architecture Manager) Sent: 03 July 2015 10:39 To: 'observium(a)observium.org' Subject: [Observium] potential purchase issue Hi all, Who would I speak to about not having purchase confirmation come back from the paddle purchasing screen? I fought for ages to get my boss to approve of the spend and the hospital actually got a credit card in line with the requirements for the site. Now we've paid for the subs, got the big green tick under the hamster logo in the payment processing screen, but then after dropping back to the subs screen in the account area, it says we have no paid subscription. I also haven't received an email yet, and it's been a while. I am concerned! Thanks Andy Franks.

1 0

potential purchase issue
by Franks Andy (IT Technical Architecture Manager) 03 Jul '15

03 Jul '15

Hi all, Who would I speak to about not having purchase confirmation come back from the paddle purchasing screen? I fought for ages to get my boss to approve of the spend and the hospital actually got a credit card in line with the requirements for the site. Now we've paid for the subs, got the big green tick under the hamster logo in the payment processing screen, but then after dropping back to the subs screen in the account area, it says we have no paid subscription. I also haven't received an email yet, and it's been a while. I am concerned! Thanks Andy Franks.

1 0

DB problems
by Eduardo Schoedler 03 Jul '15

03 Jul '15

Hi, I received the message: "Failed INSERT into DB, see details in 'db.log' inside log dir." when trying to insert ports in a billing... and there's nothing about the query in the log. -- Eduardo Schoedler

3 12

Graphs
by Andrew Colin 02 Jul '15

02 Jul '15

Hi Guys Is it possible to modify the look of the graphs to instead of showing up and down to show both going upwards but in a different color, similar to mrtg graphs Kind Regards Andrew Colin Converged Telecoms (Pty) Ltd. Licensed Telecoms Operator : (0258/IECS/JAN/09) (0258/IECNS/JAN/09) Switchboard: +27 (0)10 591 4600 Email: <mailto:andrew@convergedgroup.net> andrew(a)convergedgroup.net Web: http://www.convergedgroup.net 75 Witkoppen Road, Northriding, Johannesburg, 2169 P O Box 7246, Weltevredenpark, 1715 This communication is confidential and intended solely for the addressee(s). Any unauthorized review, use, disclosure or distribution is prohibited. If you believe this message has been sent to you in error, please notify the sender by replying to this transmission and delete the message without disclosing it. Thank you.E-mail including attachments is susceptible to data corruption, interception, unauthorized amendment, tampering and viruses, and we only send and receive emails on the basis that we are not liable for any such corruption, interception, amendment, tampering or viruses or any consequences thereof.

2 1

Configuring map interface on new observium installation
by Andi Qirjazi 02 Jul '15

02 Jul '15

Hi, I have just installed & configured observium for the first time. The first two devices are added and seems working, but I'm having problem displaying these devices on the map. All the time there is a blue sign on the middle on Atlantic ocean, it doesn't matter what I configure as device location. Please any idea how to configure the map? I have tried all the possible configurations at /opt/observium/config.php settings but with no success. This installation is behind a proxy server, but I have allowed all the traffic from observium host and I don't see any traffic from this host towards proxy server. thanks in advance, Andi Qirjazi

3 3

How to purchase a Pro license
by Mike Driscoll 01 Jul '15

01 Jul '15

I want to upgrade our community instance to professional so I can make use of e-mail alerts. My company requires an invoice. How can I get a purchase quote/invoice in US dollars?

1 0

Help understand log entries
by Rudolf Hoehler 01 Jul '15

01 Jul '15

Hello All, Could some one help me decode a log entry in Observium? We get this entry every 5 minutes in Observium, but nothing changes on the interface (That we know of :) ). 2015-07-01 13:30:45 svs-za-jhb-ne-mse-001 ge-1/0/1.1557 Interface changed: [ifAlias] ABC CPE1 Interface | VRF:ABC-VRF | Vlan 1557 | CircuitNo:027JOHA1802009912345 -> ABC CPE1 Interface | VRF:ABC-VRF | Vlan 1557 | CircuitNo:027JOHA1802009901391 Is there a way to see what triggered this in Observium? Regards, Rudolf

3 6

Device Storage graphs draw errors when in widescreen mode
by Louis Bailleul 01 Jul '15

01 Jul '15

Hi, I have noticed an issue with the device filesystems graphs : they do not display correctly in widescreen mode. The RRD command/debug says : RRDTool Output: ERROR: Legend too long But if I paste the actual rrd command in the terminal, it runs fine and the output graph is correct too. It seems to be only happening with the filesystems usage graphs. I think something similar was reported on Jira but it didn't went far : http://jira.observium.org/browse/OBSERVIUM-1248 You can find attached screenshots of the issue. For the record I am using : Observium CE 0.15.6.6430 OS Linux 2.6.32-358.14.1.el6.x86_64 [amd64] (CentOS 6.2) Apache 2.2.15 (CentOS) PHP 5.3.3 Python Python 2.6.6 MySQL 5.1.73 SNMP NET-SNMP 5.5 RRDtool 1.4.9 Best regards, Louis

1 0

What triggers the 'device rebooted' alert?
by Michael Vieth 01 Jul '15

01 Jul '15

I am showing a device reboot alert but the uptime is shown to be over a year. The reboot is reported to happen last night precisely at midnight. Using version 0.15.3.6343 Cheers, [Description: cid:image001.jpg@01CA15C7.9F525A10] Michael Vieth | Network Engineer Nexa Technologies 801 E Campbell Rd. Ste 400 | Richardson, TX 75081 Phone: (972) 590-8669 x1906 www.nexatech.com<http://www.nexatech.com/>

7 22

Observium Alerting SMSGlobal Integration
by Greg Lipschitz 01 Jul '15

01 Jul '15

Hi All, We are looking to do more with alerting and get some form of SMS Alerting happening. We currently use SMS Global for our SMS Gateway both via API and Email > SMS. Has anyone done any wizardry around some SMS Gateway API integration in to Observium? We did the SMS Global API Integration in to PRTG and that works well just using a HTTP Post (http://www.smsglobal.com.au/http-api.php?action=sendsms&user=USER&password=…) Cheers, Greg Greg Lipschitz | Director | The Summit Group E: Greg(a)thesummitgroup.com.au<mailto:Greg@thesummitgroup.com.au> | W: www.thesummitgroup.com.au<http://www.thesummitgroup.com.au> The Summit Group (Australia) Pty Ltd | P: 1300 049 749 | Level 1, 39 Railway Road, Blackburn VIC 3130 The Summit Group (USA) LLC | P: 321 216 3844 | Suite 561, 40E Main Street, Newmark DE 19711 Postal: P.O. Box 3225, Doncaster East VIC 3109 Follow us on Facebook<http://www.facebook.com/thesummitgroup/> | LinkedIn<http://www.linkedin.com/company/1942329> | Twitter<http://twitter.com/summitgroupau/>

1 0

The failed port filter is broken after update to 6535
by Marco Spicuglia 01 Jul '15

01 Jul '15

Hello there, after I upgraded to 6535, I noticed that the "ports down" filter doesn't work anymore. I have a couple of ports down at the moment, in the status box. But if I click on that red 2, then I get all ports down in the network, including the ignored ones. But I actually have a second issue too. I also noticed that if I make an account for a customer, with restricted access to their ports only, observium will still show them the global regex for the alerting systems, but also forbidden menu items, such as the groups, which give the normal users access to too sensitive information. It looks like the permission filtering in the alerts box is not really working the same way as in the status box on the left, same happens in the menus on top. I had to remove the groups in order to preserve our customers privacy, even though I found them very useful. Is there an available solution for the above already? Thanks a lot in advance for your help. Cheers, Marco

2 2

Special sysLocation character not displaying properly
by Lambert, Benoit 01 Jul '15

01 Jul '15

Hey Observium team, Some of our SNMP sysLocations aren't being displayed properly. The " é " is being displayed as " Ã© ". Is there a way I can tell php to use UTF8, or some other codec that will fix this? Thanks. Benoit Lambert Network Analyst @ NorthernTel

3 2

Special sysLocation character not displaying properly
by Lambert, Benoit 30 Jun '15

30 Jun '15

We have a production and test server. Both are affected. There must be a global php to set the character encoding? We're using Centos 6.6 and PHP 5.3.3.

2 1

Special sysLocation character not displaying properly
by Lambert, Benoit 30 Jun '15

30 Jun '15

Okay it didn't correctly display in the email either... I took a screenshot of what I mean: [cid:image001.png@01D0B32B.5AB32580] Thanks. Benoit Lambert Network Analyst @ NorthernTel

2 1

Small Community Edition update
by Adam Armstrong 30 Jun '15

30 Jun '15

I just pushed out another CE tar. It fixes a tiny HTML issue with eventlog rendering on the device page. It's super annoying, so you should update! Remember, if your CE install doesn't say "0.15.6" at the bottom, you're running an old version! adam. Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&ut…]

3 4

Ignored ports
by Andrew Colin 29 Jun '15

29 Jun '15

Hi Guys Is it possible that when I click ports that are down on the homepage that it won't show me my ignored ports? Regards Andrew

1 0

Aerohive
by Adam Armstrong 29 Jun '15

29 Jun '15

Hi Guys, Do any of you use Aerohive devices? Thanks, adam. Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&ut…]

5 4

"Interface changed:" events
by Robert Williams 29 Jun '15

29 Jun '15

Hi, Since the scheduled SVN at 06:00 this morning we seem to be getting these for all of our (old, very) 3Com 2948 switches: They occur on every poll, for every port, and are currently spamming the event log. Anyone have any ideas? I've just done a forced SVN up to 6518 but it's still occurring. My guess is it happened around 6514 which was what it was running this morning when it appears to have started. Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

2 2

[patch] Varnish support with local agent
by Mark Nellemann 28 Jun '15

28 Jun '15

Hi, I am using Observium to monitor Varnish, and I have attached a patch for the files that I have changed. It's diff'ed against svn trunk of today. -- Best Regards Mark Nellemann

2 4

Installing JpGraph blanks out bills page
by Rudolf Hoehler 27 Jun '15

27 Jun '15

Hello, I just installed jpgraph to get the bills page to stop prompting the "please install jpgraph" notice, and as soon as I removed the "includes/jpgraph/src/jpg-config.inc.php" file, as request, the bills page stopped loading. It's just blank. I've restarted apache and nothing in the error or access logs are pointing me in any direction. Any help to trouble shoot will be appreciated. All I did was download the jpgraph-3.5.0b1.tar.gz<http://jpgraph.net/download/download.php?p=5> file, unzip it and move it into the specified folder, and remove the config file as requested. Regards, Rudolf

2 2

alerts
by Jeffrey d'Ambly 27 Jun '15

27 Jun '15

I’m having an issue where it seems that host down alerts are always delayed. Where can I start with troubleshooting this issue? Note that alerts are working, but something seems to not work with host down alerts.[cid:A108895F-C5AE-4C29-B6A5-9A3D5BA08BAE]

5 14

Upgrade
by Fernando Fuentes 26 Jun '15

26 Jun '15

Team, I did a svn update and db update to our enterprise installation but it keeps saying: [root@sysadm observium]# ./discovery.php -u Observium 0.15.6.6507 Discovery Current Revision : 6507 New Revision : 6509 Any ideas why it wont move to the latest revision? Regards, -- Fernando Fuentes Technical Lead & Systems Administrator Email: ffuentes(a)aasteel.com American Alloy Steel, Inc. Houston, Texas Website: http://www.aasteel.com Phone: 713-462-8081 Fax: 713-462-0527

3 4

hp 5900 comware fibre stats
by Daniel Rolfe 26 Jun '15

26 Jun '15

HI All Looking at our cisco 3750E we see the below: [image: Inline image 6] *Bur our hp comware switches we see the below:* [image: Inline image 5] [image: Inline image 4] [image: Inline image 2] [image: Inline image 3]

3 6

PoE support?
by Mark D. Nagel 26 Jun '15

26 Jun '15

I was asked if we could display PoE details on switches and said "I'm sure we can!" and proceeded to find out, no, not quite yet. From what I can tell, support is only partially in place -- is that accurate? I found the global config param needed and set it, and it looks like data is collecting in RRD files, but they are not included in the device display. Is this just an in-progress thing? Thanks, Mark ./config.php:$config['enable_ports_poe'] = 1; ./includes/functions.inc.php: $rrd_types = array('adsl', 'dot3', 'fdbcount', 'poe', NULL); ./includes/defaults.inc.php:$config['enable_ports_poe'] = 0; // Enable PoE stats collection ./includes/polling/ports.inc.php: // Fetch POWER-ETHERNET-MIB and CISCO-POWER-ETHERNET-EXT-MIB if enable_ports_poe is enabled. ./includes/polling/ports.inc.php: // This data is used in the per-port poe include. ./includes/polling/ports.inc.php: $ports_module = 'enable_ports_poe'; ./includes/polling/ports.inc.php: $ports_module = 'enable_ports_poe'; ./includes/polling/ports.inc.php: if ($attribs[$ports_module] || ($config[$ports_module] && !isset($attribs[$ports_module]))) { include("port-poe.inc.php"); } ./includes/polling/port-poe.inc.php: $rrdfile = get_port_rrdfilename($port, "poe"); 266940 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:11 ./rrd/banon/port-6-poe.rrd 274245 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:12 ./rrd/danbo/port-8-poe.rrd 274249 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:12 ./rrd/unifi/port-2-poe.rrd 274251 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:16 ./rrd/colby/port-2-poe.rrd 274246 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:12 ./rrd/hq-fw01/port-1-poe.rrd 141443 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:15 ./rrd/hq-sw02.willingminds.com/port-10101-poe.rrd 139185 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:11 ./rrd/hq-outsw01/port-10001-poe.rrd 266978 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:11 ./rrd/chevre/port-7-poe.rrd 143984 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:16 ./rrd/hq-voipsw01.willingminds.com/port-10001-poe.rrd 394012 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:16 ./rrd/vacherin/port-1-poe.rrd 394011 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:12 ./rrd/vignotte-drac/port-8-poe.rrd 139651 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:12 ./rrd/valencay/port-2-poe.rrd 139671 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:12 ./rrd/dns01/port-2-poe.rrd 274244 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:11 ./rrd/derby/port-8-poe.rrd 394817 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:16 ./rrd/vignotte/port-1-poe.rrd 394008 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:11 ./rrd/hq-vpn01/port-3-poe.rrd 143874 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:16 ./rrd/hq-ipv6.willingminds.com/port-1-poe.rrd 394829 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:16 ./rrd/hq-ap01/port-2-poe.rrd 394010 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:12 ./rrd/vacherin-drac/port-8-poe.rrd 143870 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:16 ./rrd/hq-sw01.willingminds.com/port-10101-poe.rrd 394009 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:11 ./rrd/vendomois/port-1-poe.rrd 394828 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:16 ./rrd/hq-ap02/port-2-poe.rrd 139713 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:15 ./rrd/hq-labsw01.willingminds.com/port-1-poe.rrd 143873 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:16 ./rrd/hq-coresw01/port-10101-poe.rrd 139609 456 -rw-r--r-- 1 www-data www-data 464632 Jun 25 08:11 ./rrd/hq-cr-epson7520/port-1-poe.rrd -- Mark D. Nagel, CCIE #3177 Emeritus <mnagel(a)willingminds.com> Principal Consultant, Willing Minds LLC (http://www.willingminds.com) cell: 949-279-5817, desk: 714-495-4001, fax: 714-844-4698 ** For faster support response time, please ** email support(a)willingminds.com or call 714-495-4000

5 5

CISCO-IP-LOCAL-POOL-MIB
by Matthias Cramer 25 Jun '15

25 Jun '15

Hi All I had a look into the Cisco IP local pool MIB, as we have IP Pools on our LNS for the DSL Customers. It would be nice if we could monitor the usage of these pools in Observium. I looked around in the code, but found no similar discoverer/poller to start with. There seams no sensor type to fit such values. Can anyone give me a hint? Or is already someone working on that? Regards Matthias -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zürich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250

4 6

Add Contacts not working?
by Rudolf Hoehler 25 Jun '15

25 Jun '15

Saicom now offers Cloud PBX Hello Team, When I click on the Globe -> Contacts -> + Add Contact, the screen just refreshes and goes the home page. Running Observium 0.15.6.6496 (rolling) Regards, Rudolf -- Rudolf Hoehler Technical Team Manager Office: 0861 SAICOM (724 266) Direct: 010 140 5104 Support: 010 140 5050 Cell: 083 644 7800 Fax: 010 140 5001 Email: rudolf(a)saicomvoice.co.za Visit our website: www.saicomvoice.co.za

4 4

Observium Automatically Logging Out
by Greg Lipschitz 25 Jun '15

25 Jun '15

Hi All, We have Observium up on our NOC screen – the issue we are having is it seems to auto-logout after 20 mins or so. Is there any way to have it log in, stay logged in and auto-refresh? Cheers, Greg Greg Lipschitz | Director | The Summit Group E: Greg(a)thesummitgroup.com.au<mailto:Greg@thesummitgroup.com.au> | W: www.thesummitgroup.com.au<http://www.thesummitgroup.com.au> The Summit Group (Australia) Pty Ltd | P: 1300 049 749 | Level 1, 39 Railway Road, Blackburn VIC 3130 The Summit Group (USA) LLC | P: 321 216 3844 | Suite 561, 40E Main Street, Newmark DE 19711 Postal: P.O. Box 3225, Doncaster East VIC 3109 Follow us on Facebook<http://www.facebook.com/thesummitgroup/> | LinkedIn<http://www.linkedin.com/company/1942329> | Twitter<http://twitter.com/summitgroupau/>

7 9

Juniper EX4550 - Snmp issue
by Raphael Maunier 24 Jun '15

24 Jun '15

Hello, Since 2 or 3 months I have some issue with some of our EX4550. For some reason,, some of the switches are just polling from time to time ( first 2 screencap ) and others are just not polling ( 3 - 4 -5 ) the funny thing is : I don’t have this issue on cacti ( the switches are also polled from Cacti ) I have 3 Junos version running on the backbone and only 3 out of 20 ex4450 have this issue ( and they don’t have the same junos version ). The filter on the loopback interfaces are exactly the same. I can have the arp table, the lldp and bgp/ospf neig but not the if graphing … I already restarted snmp and tried many other thing on the juniper itself. Thanks, Raphael

3 2

Inventory serial# list
by Jan Kuiper 24 Jun '15

24 Jun '15

LS, Is it possible to select in the Inventory list only the devices/items with an Serial filled in, so blank Serial# are skipped? Met vriendelijke groet / Kind Regards, Jan Kuiper [cid:image001.jpg@01CF62F0.6DBAB760] Piramide ICT Services | Kollergang 9 | 7773 NG Hardenberg | Postbus 220 | 7770 AE Hardenberg info(a)piramide.nl<mailto:info@piramide.nl> | http://www.piramide.nl | +31 (0)523 261 387 Disclaimer Deze e-mail is uitsluitend bestemd voor de geadresseerde(n). Verstrekking aan en gebruik door anderen is niet toegestaan. Piramide sluit iedere aansprakelijkheid uit die voortvloeit uit elektronische verzending.

1 0

MySQL App Graphics of only one device don't work anymore
by Ximena Cardinali 24 Jun '15

24 Jun '15

Hi, Today I had to restart a VM and when I checked the Statistics I saw that the MySQL graphics of the VM don't work anymore since last week: [image: Inline images 1] The MySQL Graphics of other devices are working properly but this one. Nothing was changed on that VM ever since. I tried to run the discovery and poller script in Debug mode and I found no errors (maybe I'm blind). I renamed and deleted the rrd Files, deactivated and re-activated the Agent for this specific App, and nothing. When I telnet the VM from the Observium Host, I get some results: <<<mysql>>> a0:962085 a1:249635 a2:14093 a3:3755 a4:2617 a5:22885515 a6:1 a7:4 a8:-1 a9:-1 aa:8192 ab:4428 ac:3735 ad:0 ae:3605 af:130 ag:1486 ah:4630 ai:3744 aj:6044 ak:4472 al:0 am:0 an:0 ao:0 ap:0 aq:0 ... Does anyone have any idea of what can be the error? Thanks, Ximena.

1 0

Alert Checker Up/Down Dependency
by Thiedek, Vic 24 Jun '15

24 Jun '15

Hey, Is there a way to create an alert checker that will only report devices down if a device they are behind is up? We have remote offices with 100's of devices, and if there is a WAN issue, we receive 100's of alerts from Observium for that location. Is there a way to create a condition in an alert checker that a device (ex: router) has to be in an "up" status in order for devices behind it to alert as "down" That way if the Router/WAN is "down" we would only get that alert, not all the other devices. Example: This Alert Checker only alerts on devices in TN Entity Type: Device Check Conditions: device_status equals 0 Device Match: location match *TN* Entity Match: * Alert Delay 1 Example: This Alert Checker only alerts on devices in CA when the Router (specific device) is "up" Entity Type: Device Check Conditions: A Specific Device status equals 1 // check that office WAN router is "up" (I know this not a correct syntax, just example) device_status equals 0 //check that device is down AND Device Match: location match *CA* Entity Match: * Alert Delay 2 Cheers! Vic

3 2

Device poll order
by Lambert, Benoit 23 Jun '15

23 Jun '15

Hey Observium team, Question: Does poller-wrapper/poller.php poll devices in the same order each time? Or is it randomized? e.g. If poller-wrapper starts one CRON session with device ID 500, will it always start with device id 500 in other CRON sessions to come? Thanks. Benoit Lambert Network Analyst @ NorthernTel

2 1

SVN down?
by Markus Klock 23 Jun '15

23 Jun '15

Hello! As of this morning I can not connect to the SVN repo, any known issues? Updating '.': svn: E175002: Unable to connect to a repository at URL ' http://svn.observium.org/svn/observium/trunk' svn: E175002: Unexpected HTTP status 503 'Service Unavailable' on '/svn/observium/trunk' svn: E175002: Additional errors: svn: E175002: OPTIONS request on '/svn/observium/trunk' failed: 503 Service Unavailable /Markus

2 2

Correction of uptime-spikes?
by Pål Rydningen 23 Jun '15

23 Jun '15

Hi all Im monitoing a Windows server that is scheduled to reboot daily. But the "Uptime" graph is showing odd spikes that cannot possibly reflect actual values. [image: Inline image 2] I've used the "removespikes.pl" script, pr. instructions, but get no feedback from the scripts and the graphs remain unchanged. What would be the best way to correct the data? Using : *Observium CE*0.14.4.5229*Apache*2.2.22 (Debian)*PHP*5.4.39-0+deb7u2*MySQL* 5.5.43-0+deb7u1*SNMP*NET-SNMP version: 5.4.3*RRDtool*1.4.7 -- Pål R.

4 6

Re: [Observium] Will SVN username and password change?
by Adam Armstrong 22 Jun '15

22 Jun '15

Yes :) Adam. On 22 Jun 2015 16:57, "Lambert, Benoit" <Benoit.Lambert(a)ntl.nt.net> wrote: > > Hey Observium team, > > > > We recently renewed our subscription and it looks like our username changed (4 numbers added at the end). > > > > Will this impact the SVN update script we use to update Observium (will we have to change our username in the script to reflect the new change?). > > > > > > Thanks. > > > > > > Benoit Lambert > > Network Analyst @ NorthernTel > >

1 0

Will SVN username and password change?
by Lambert, Benoit 22 Jun '15

22 Jun '15

Hey Observium team, We recently renewed our subscription and it looks like our username changed (4 numbers added at the end). Will this impact the SVN update script we use to update Observium (will we have to change our username in the script to reflect the new change?). Thanks. Benoit Lambert Network Analyst @ NorthernTel

1 0

SVN commit mail crashed our mail server
by Michael.Weinrich＠picturemaxx.com 22 Jun '15

22 Jun '15

Hello, the SVN commit mail from the observium-svn list yesterday (2015-06-04 16:46:51 +0200) crashed our mail server, most likely because the subject was way too long. I don't know, what script/hook you are using, but the standard in RFC 2822, section 2.1.1. states that "Each line of characters MUST be no more than 998 characters, and SHOULD be no more than 78 characters, excluding the CRLF" The subject of said mail was way over 2000 characters. For now I unsubscribed from that list because I don't want to kill e-mail for everybody in the office once in a while, but can you have a look into this issue and tell me when it is fixed, so I can resubscribe? Thanks, Michael Weinrich DevOps Engineer ---------------------------------------------------- picturemaxx AG Stefan-George-Ring 2 81929 München GERMANY ---------------------------------------------------- tel +49 89 357 147-0 fax +49 89 357 147-10 ---------------------------------------------------- follow us on: facebook<http://www.facebook.com/picturemaxx.ag> [cid:image001.jpg@01D09F71.31C30690] <http://www.facebook.com/picturemaxx.ag> | twitter<https://twitter.com/picturemaxx> [cid:image002.jpg@01D09F71.31C30690] <https://twitter.com/picturemaxx> ---------------------------------------------------- michael.weinrich(a)picturemaxx.com<mailto:michael.weinrich@picturemaxx.com> www.picturemaxx.com<http://www.picturemaxx.com/> www.my-picturemaxx.com<http://www.my-picturemaxx.com/> ---------------------------------------------------- Amtsgericht München - HRB 138366 Vorstand: Bernd Michael Czichon Aufsichtsratsvorsitzender: Dr. Andreas Beyer Stellv. Aufsichtsratsvorsitzender: Prof. Dr. Dirk Bildhäuser USt-IdNr. DE 215535923 [cid:image003.jpg@01D09F71.31C30690]

7 10

empty /health/metric=temperature/view=detail/
by Jordan Paschalidis 19 Jun '15

19 Jun '15

Hallo, in my observiuminstalltion suddenly the links to temperature, fanspeed and voltage are empty. Its is acentos6 system was installed with observium CE-0.14.11.6000. I did an update to CE 0.15.6.6430 but this didn't change anything. Does somebody know how to fix this? --------------------------------- XCOM AG Muensterstr. 100A 40476 Duesseldorf , Germany Telefon +49 211 953530 Telefax +49 211 9535353 jordan.paschalidis(a)xcom.de

2 1

Canceled
by Fernando Fuentes 18 Jun '15

18 Jun '15

Team, My paypal subscription was canceled. Any reason why? Regards, -- Fernando Fuentes Technical Lead & Systems Administrator Email: ffuentes(a)aasteel.com American Alloy Steel, Inc. Houston, Texas Website: http://www.aasteel.com Phone: 713-462-8081 Fax: 713-462-0527

2 2

Front page issue with Professional Edition
by Jeffrey d'Ambly 18 Jun '15

18 Jun '15

Not sure what I’m doing wrong here but when I added the following I lost the nice summary bar at the top of the page above the map that states the amount of devices alerts etc. // Frontpage order you can use: map, device_status, overall_traffic, custom_traffic, minigraphs, syslog, eventlog $config['frontpage']['order'] = array('map', 'overall_traffic', 'custom_traffic', 'minigraphs', 'device_status', 'syslog', 'eventlog'); Any ideas on what I’m doing wrong here? If I comment this line out it comes back but then I don’t see any of my custom mini-grpahs :/ —Jeff

2 2

Group system
by Adam Armstrong 17 Jun '15

17 Jun '15

Hi All, Any of you guys using the groups system? If so, what for? What's missing? What changes would make it more useful? Cheers, adam. Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&ut…]

4 6

Alert to monitor cisco ARP table
by Lambert, Benoit 17 Jun '15

17 Jun '15

We want an alert when a new mac address is added to an access port. I did some more research and I got the switch to send a Mac-Notification-Change trap to the server. Is there an easy way to implement this? I am testing with snmptrapd daemon. I assume once the server receives the trap it can be re-routed to syslog-ng and brought into Observium. Switch --> Server (udp 162) -->Script/Program that re-routes -->Server (udp 514) --> syslog-ng -->Observium instance I was also struggling with the TRAP payload, the mac, port index and vlan weren't part of the message. Do I need the CISCO-MAC-NOTIFICATION-MIB? Thank you.

2 1

My graphs don't work - all values "-NAN"
by Rudolf Hoehler 17 Jun '15

17 Jun '15

Saicom Offers Inbound and Outbound Call Centre Solutions Hello All, Busy playing around with Observium and my graphs don't work. :) Jokes aside, very cool piece of software, but my graphs all display -NAN as values. The snmp walk is working and pulling information and it's displaying fine on the web interface, but the graphs don't display the values - sceenshots: https://dl.dropboxusercontent.com/u/13359577/1__ssh_and_Observium____-_za-j… https://dl.dropboxusercontent.com/u/13359577/Observium__NAN_Graph.jpg I followed the wiki instructions, double checked my bash history and it seems fine. Running Debian 7 - Debian 3.2.65-1 x86_64 GNU/Linux Server has 16gigs of RAM and 8 CPU cores. On the mailing list people have warned agaistn a 1.5 version of rrdtool, but I am running version 1.4.7. _____________________________________________________________ rrdtool -v RRDtool 1.4.7 Copyright 1997-2012 by Tobias Oetiker <tobi(a)oetiker.ch> Compiled Aug 2 2012 07:02:39 _____________________________________________________________ PHP Version seems fine. _____________________________________________________________ php -v PHP 5.4.41-0+deb7u1 (cli) (built: May 22 2015 12:49:18) _____________________________________________________________ In the MySQL DB, the storage-state table seems fine, but I cannot find any historic data in the database - where should I look for this information? _____________________________________________________________ mysql> select * from `storage-state`; +------------+----------------+--------------+---------------+--------------+--------------+--------------+ | storage_id | storage_polled | storage_size | storage_units | storage_used | storage_free | storage_perc | +------------+----------------+--------------+---------------+--------------+--------------+--------------+ | 1 | 1434541853 | 277800820736 | 4096 | 173082042368 | 104718778368 | 62 | | 2 | 1434541853 | 8341504000 | 4096 | 0 | 8341504000 | 0 | | 3 | 1434541853 | 397803520 | 1024 | 56981504 | 340822016 | 14 | | 4 | 1434541853 | 984341426176 | 4096 | 122228555776 | 862112870400 | 12 | +------------+----------------+--------------+---------------+--------------+--------------+--------------+ 4 rows in set (0.00 sec) Thanks for your time folks, appreciate any help. Regards, Rudolf -- Rudolf Hoehler Technical Team Manager Office: 0861 SAICOM (724 266) Direct: 010 140 5104 Support: 010 140 5050 Cell: 083 644 7800 Fax: 010 140 5001 Visit our website: www.saicomvoice.co.za

2 2

Re: [Observium] hdd temperature sensor keeps vanishing ?
by Adam Armstrong 17 Jun '15

17 Jun '15

If we don't see the sensor returned in the agent output, it'll be removed. If it reappears, it'll be readded. It's likely a timing thing with hddtemp causing that sensor to be occasionally not returned correctly. Adam. On 17 Jun 2015 10:34, Simon Smith <simonsmith5521(a)gmail.com> wrote: > > Hi All, > > hoping someone has seen this issue I’m having > > for some mad reason the HDD temperature sensor on one our of servers keeps disappearing ? > > but whats mad is the event log is showing the Entity as BLANK ? > > and another mad thing I’ve noticed is when it gets re-added or updated the HIGH and LOW keep getting adjusted to 0, so i have to all the time go and manually adjust the values? > > is it possible a problem with hddtemp, observium, or something else I’m just missing? > > I have attached a screenshot showing what I mean > > regards > > Simon >

1 0