- observium - lists.observium.org

Devices showing Down
by Josh Hopper 03 May '16

03 May '16

I managed to get alerts working and its great. I did have a few questions though. Ideally, I'd like it if there were nothing in red on the dashboard (as if there are issues). [image: Inline image 1] Observium says I have a port down and 1 alert failed. However, all alerts are either OK or suppressed. Ports are either on and in use or disabled. There is nothing that shows in those lists. Any reason why it says that something is down? Your help is appreciated. Thanks. -- JOSHUA HOPPER NETWORK ENGINEER 1-828-558-1403 Joshua.Hopper(a)broadplex.net www.broadplex.net

2 3

Re: [Observium] Help with Alert Checker processor usage / excluding
by Michael 03 May '16

03 May '16

2 1

Help with Alert Checker processor usage / excluding certain servers
by Michael 03 May '16

03 May '16

2 1

Poller Overruns
by Gagandeep Mann 03 May '16

03 May '16

Hi We are currently running OBSERVIUM Professional Ed with 31 Cisco 7600/3560/2960 polling around 5000+ ports. The Traffic graphs are showing gaps as the poller seems to be taking a lot of time. We have tried different values for the poller wrapper threads (16, 32, 48, 64) on a 16 core/64GB RAM machine but not seen any improvement. We have also tried different values for the 'ma-rep' field for snmp bulkwalk (5, 10 etc) - had seen improvement initially after enabling with 5, but the polling times seem to have increased automatically after some time. We are currently running with 64 Poller threads and max-rep 10. Pls suggest if we are missing something. A few screen-shots are attached. [cid:image001.png@01D1A52A.833D30D0] [cid:image002.png@01D1A52A.833D30D0] [cid:image003.png@01D1A52A.DB6AE400] [cid:image004.png@01D1A52B.42FE16A0] Best regards Gagandeep Mann ________________________________ This E-Mail may contain Confidential and/or legally privileged Information and is meant for the intended recipient(s) only. If you have received this e-mail in error and are not the intended recipient/s, Kindly notify the sender and then delete this e-mail immediately from your system. You are also hereby notified that any use, any form of reproduction, dissemination, copying, disclosure, modification, distribution and/or publication of this e-mail, its contents or its attachment/s other than by its intended recipient/s is strictly prohibited and may be unlawful. Internet Communications cannot be guaranteed to be secure or error-free as information could be delayed, intercepted, corrupted, lost, or contain viruses. Sistema Shyam Teleservices Limited does not accept any liability for any errors, omissions, viruses or computer problems experienced by any recipient as a result of this e-mail.

2 1

Help with Alert Checker processor usage / excluding certain servers
by Michael 03 May '16

03 May '16

1 0

BGP modul question
by Laszlo Nemeth 02 May '16

02 May '16

Hello We use the PE 7703 version and we would like to use the BGP modul for our Cisco ASR 9001 router. On the Observium / Routing tab we see the OSPF connections but there is no BGP section. We hard-enabled the BGP in the config.php ($config['enable_bgp'] = 1;) but it doesn’t help. All of BGP related mysql tables are empty. What we did wrong? :) Thanks Laszlo

3 12

Alerts and Ports
by Josh Hopper 29 Apr '16

29 Apr '16

I managed to get alerts working and its great. I did have a few questions though. Ideally, I'd like it if there were nothing in red on the dashboard (as if there are issues). [image: Inline image 1] Observium says I have a port down and 1 alert failed. However, all alerts are either OK or suppressed. Ports are either on and in use or disabled. There is nothing that shows in those lists. [image: Inline image 2] [image: Inline image 3] Any reason why it says that something is down? Also, I have a unit that does not have 2 out of 4 PSUs and fans. Show's that they are down. [image: Inline image 4] I have suppressed the alerts. Is there a way to get it to ignore just what is currently down without ignoring the whole device? Your help is appreciated. Thanks. -- JOSHUA HOPPER NETWORK ENGINEER 1-828-558-1403 Joshua.Hopper(a)broadplex.net www.broadplex.net

1 0

Traffic summary graphs for Cisco ASA error
by Ole Hansen 29 Apr '16

29 Apr '16

Hi, When drawing the traffic summary graph for two Cisco ASA contexts (on the same physical ASA HA setup) i get the error below. I can’t see whats wrong with the RRD CMD. Any ideas? [Port (id=580, ifIndex=34) ignored by ifType=l2vlan] × [Port (id=822, ifIndex=36) ignored by ifType=l2vlan] × RRD CMD[%ygraph /tmp/AWXsLIqXeIKG8gBv.png -Y --alt-autoscale --rigid --start 1461654797 --end 1461741197 --width 1152 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DroidSansMono,DejaVuSansMono' --font AXIS:7:'DroidSansMono,DejaVuSansMono' --font-render-mode normal -E COMMENT:'Bits/s ' COMMENT:' Now' COMMENT:' Avg' COMMENT:' Min' COMMENT:' Max' COMMENT:' Total' COMMENT:'\l' CDEF:inB= CDEF:outB= CDEF:octets=inB,outB,+ CDEF:doutB=outB,-1,* CDEF:inbits=inB,8,* CDEF:outbits=outB,8,* CDEF:bits=inbits,outbits,+ CDEF:doutbits=doutB,8,* VDEF:95thin=inbits,95,PERCENT VDEF:95thout=outbits,95,PERCENT CDEF:pout_tmp=doutbits,-1,* VDEF:dpout_tmp=pout_tmp,95,PERCENT CDEF:dpout_tmp2=doutbits,doutbits,-,dpout_tmp,-1,*,+ VDEF:d95thout=dpout_tmp2,FIRST VDEF:totin=inB,TOTAL VDEF:avein=inbits,AVERAGE VDEF:totout=outB,TOTAL VDEF:aveout=outbits,AVERAGE VDEF:tot=octets,TOTAL COMMENT:' \l' HRULE:999999999999999#FFFFFF:'Total Rx' GPRINT:inbits:LAST:%6.2lf%s GPRINT:inbits:AVERAGE:%6.2lf%s GPRINT:inbits:MIN:%6.2lf%s GPRINT:inbits:MAX:%6.2lf%s GPRINT:totin:%6.2lf%sB COMMENT:'\l' HRULE:999999999999999#FFFFFF:' Tx' GPRINT:outbits:LAST:%6.2lf%s GPRINT:outbits:AVERAGE:%6.2lf%s GPRINT:outbits:MIN:%6.2lf%s GPRINT:outbits:MAX:%6.2lf%s GPRINT:totout:%6.2lf%sB COMMENT:'\l' HRULE:999999999999999#FFFFFF:' Agg' GPRINT:bits:LAST:%6.2lf%s GPRINT:bits:AVERAGE:%6.2lf%s GPRINT:bits:MIN:%6.2lf%s GPRINT:bits:MAX:%6.2lf%s GPRINT:tot:%6.2lf%sB COMMENT:'\l' HRULE:0#999999%n] × RRD RUNTIME[0.0117s] RRD STDOUT[ERROR: String ends after the = sign on 'CDEF:inB='] RRD_STATUS[FALSE] — Ole Hansen

3 5

Alerts for Power
by Josh Hopper 28 Apr '16

28 Apr '16

How do I setup a Sensor alert to tell me if I'm 80% of my circuit or more than 10 Amps? Might have sent this before. Not sure what happened to the email. Sorry for a duplicate if there was one. -- JOSHUA HOPPER NETWORK ENGINEER 1-828-558-1403 Joshua.Hopper(a)broadplex.net www.broadplex.net

3 3

Alerts for Power Amperage
by Josh Hopper 28 Apr '16

28 Apr '16

How do I setup an Sensor alert for power amps? Would like to know when amps are > 10 on a PDU or 80% of the power circuit -- JOSHUA HOPPER NETWORK ENGINEER 1-828-558-1403 Joshua.Hopper(a)broadplex.net www.broadplex.net

1 0