- observium - lists.observium.org

cosmetic question
by Ray, Bjoern Karsten 26 May '14

26 May '14

Hi there, I have two routers in different location connected over IPSEC-VPN. Both devices are actively monitored which works fine. Now I am wondering how to make this interconnect visible on the map. Is there an option I have overseen? Alternatively if IPSEC isn't "supported" in this way what protocols would result in a visible connection? Thanks in advance! Björn

2 1

Feature request: Firewall flow statistics
by Erwin Heringa 26 May '14

26 May '14

Hi all, We would like to graph the amount of sessions through our Juniper SRX firewalls with Observium. (snmp oid: .1.3.6.1.4.1.2636.3.39.1.12.1.1.1.6.0) It would be a really nice feature and in the past (when we used cacti) it has helped us detecting a problem with software on one of our servers. I'd really like to see that in Oberservium and maybe others can benefit as well. Met vriendelijke groet, kind regards, Erwin Heringa SIDN | Meander 501 | 6825 MD | Postbus 5022 | 6802 EA | ARNHEM T +31 (0)26 352 55 59 | F +31 (0)26 352 55 05 erwin.heringa(a)sidn.nl | www.sidn.nl

1 0

missing port description in traffic bills edit mode
by Andre Mamitzsch 26 May '14

26 May '14

Hi, I just wanted to change a traffic bill and delete a port, if editing the traffic bill, the port list on the right hand side shows only the delete button but no port description. I found that in revision 5521 and verified it with Firefox, Chrome and Safari. So it does not seem to be browser specific. Could you please look into it ? Regards, Andre

2 1

Transceiver Power error in fiber interface
by Zafar Pravaiz 24 May '14

24 May '14

Hi After upgrading to latest observium i start getting loads of following errors. I don't understand is this a threshold set problem or some IOS bug? Can some one please shed some light? Observium :: Network Observation and Monitoring Dbm Alarm: sfsw1 Te2/1 Receive Power Sensor - TenGigabitEthernet2/1 Receive Power Sensor is over threshold: -2.5dBm (> -40dBm) Observium :: Network Observation and Monitoring Dbm Alarm: sfsw1 Te2/2 Receive Power Sensor - TenGigabitEthernet2/2 Receive Power Sensor is over threshold: -2.6dBm (> -40dBm) Observium :: Network Observation and Monitoring Voltage Alarm: sfsw1 Te2/1 Supply Voltage Sensor - TenGigabitEthernet2/1 Supply Voltage Sensor is over threshold: 0V (> 0V) Observium :: Network Observation and Monitoring Dbm Alarm: sfsw2 Te2/1 Receive Power Sensor - TenGigabitEthernet2/1 Receive Power Sensor is over threshold: -2.8dBm (> -40dBm) Observium :: Network Observation and Monitoring Dbm Alarm: coresw1.aus.edu Te5/4 Receive Power Sensor - TenGigabitEthernet5/4 Receive Power Sensor is over threshold: 0dBm (> -40dBm) SFSW1#sh interfaces transceiver detail Transceiver monitoring is disabled for all interfaces. mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable. ++ : high alarm, + : high warning, - : low warning, -- : low alarm. A2D readouts (if they differ), are reported in parentheses. The threshold values are calibrated. High Alarm High Warn Low Warn Low Alarm Temperature Threshold Threshold Threshold Threshold Port (Celsius) (Celsius) (Celsius) (Celsius) (Celsius) ---------- ------------------ ---------- --------- --------- --------- Te2/1 29.5 ++ 0.0 0.0 0.0 0.0 Te2/2 29.1 ++ 0.0 0.0 0.0 0.0 High Alarm High Warn Low Warn Low Alarm Voltage Threshold Threshold Threshold Threshold Port (Volts) (Volts) (Volts) (Volts) (Volts) ---------- --------------- ---------- --------- --------- --------- Te2/1 0.00 0.00 0.00 0.00 0.00 Te2/2 0.00 0.00 0.00 0.00 0.00 High Alarm High Warn Low Warn Low Alarm Current Threshold Threshold Threshold Threshold Port (milliamperes) (mA) (mA) (mA) (mA) ---------- ----------------- ---------- --------- --------- --------- Te2/1 6.1 ++ 0.0 0.0 0.0 0.0 Te2/2 6.7 ++ 0.0 0.0 0.0 0.0 Optical High Alarm High Warn Low Warn Low Alarm Transmit Power Threshold Threshold Threshold Threshold Port (dBm) (dBm) (dBm) (dBm) (dBm) ---------- ----------------- ---------- --------- --------- --------- Te2/1 -2.9 ++ -40.0 -40.0 -40.0 -40.0 Te2/2 -2.6 ++ -40.0 -40.0 -40.0 -40.0 Optical High Alarm High Warn Low Warn Low Alarm Receive Power Threshold Threshold Threshold Threshold Port (dBm) (dBm) (dBm) (dBm) (dBm) ---------- ----------------- ---------- --------- --------- --------- Te2/1 -2.5 ++ -40.0 -40.0 -40.0 -40.0 Te2/2 -2.6 ++ -40.0 -40.0 -40.0 -40.0 Thanks -- *Zafar Pravaiz *IT Senior Systems Engineer Information Technology Department AUS /> </span><span style='font-size:10.0pt;font-family:Times;mso-bidi-font-family: Tel +971 6 515 2164 Fax +971 6515 2112 American University of Sharjah PO Box 26666, Sharjah United Arab Emirates http://www.aus.edu <http://www.aus.edu/> zpravaiz(a)aus.edu <mailto:youremail@aus.edu>

6 9

FW: SNMP unreachable
by Micah Young 23 May '14

23 May '14

Hi Currently I am able to run an snmpwalk on my devices from bash, however all devices appear down in my Observium instance due to snmp. Does anyone have any ideas as to why this may be the case? -Mike Y. ARDEN A Global Company Celebrating over 50 years of making your life more comfortable! This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. This OUTBOUND E-mail and Document(s) has been scanned by an Antivirus Server.

1 0

WMI Module Observium
by Jeremy Alberts 23 May '14

23 May '14

Hello, I have the following case. I am useing Observium to monitor a few Windows Server 200 R2 VM's. Some machines can't get there disks polled because of a BDEdrive partition (because of this partition the poll times go up to 60 sec/per machine as wel). As workarround i have disabled the storage poller module (the polling time goes down to 3 sec), and enabled the WMI poller module. The wmi poller module works nice. Polling of the Disk partition works as wel! There is only one problem, the graphs/logs for diskspace dont get written to the rdd files when using the wmi disk poller module. Is this a know problem and if so, is there a fix or setting that I could use? Kind regards, Jeremy

3 6

{Disarmed} Health Processor Usage sorting according to the Usage ?
by Supun Rathnayake 23 May '14

23 May '14

Hi , The current health monitoring top menu report ( http://x.x.x.x/health/metric=processor/ ) displays the items in the alphabetical order of the device name. But it would great if we can get this sorted by actual usage, so that it gives like "Top CPU Usages like report" This is just a suggestion, what do you all think , the same thing could be applied to other metrics as well for the time being I just edited the /opt/observium/html/pages/health/processor.inc.php file and set $processors = array_sort_by($processors, 'processor_usage', SORT_DESC, SORT_NUMBER, 'processor_descr', SORT_ASC, SORT_STRING); to get this effect. but my worry is, this will be overwritten when we do the svn upgrades :-) With Best Regards, Supun Rathnayake Lanka communication Services (Pvt) Ltd. 65C, Dharmapala Mawatha, Colombo 07. Sri Lanka. Tel:+94-11-2437545 <tel:%2B94-11-2437545> http://www.lankacom.net http://blog.lankacom.net

2 2

Graphing/data problem
by Joshua Elson 22 May '14

22 May '14

Hi guys, We just started having this problem on Friday and am not sure where to look for the problem. Some of our data just doesn't show up anymore. See the attached image. Some servers work fine and some don't. The 6 hour view will work ok, but the historical data seems to have disappeard. We are seeing odd ?'s on many of the graphs installed of numbers. Here is the SVN info: [root@noc observium]# svn info Path: . URL: http://svn.observium.org/svn/observium/trunk Repository Root: http://svn.observium.org/svn Repository UUID: 61d68cd4-352d-0410-923a-c4978735b2b8 Revision: 5503 Node Kind: directory Schedule: normal Last Changed Author: adama Last Changed Rev: 5503 Last Changed Date: 2014-05-19 01:40:38 -0700 (Mon, 19 May 2014) Any help is greatly appreciated! Josh Elson | Linux Systems Administrator MaxLinear | www.maxlinear.com<http://www.maxlinear.com/> 2051 Palomar Airport Road, Suite 100 | Carlsbad, CA 92011 [Description: Description: http://wiki/download/attachments/1704274/Maxlinear+Logo.png?version=1&modif…] ________________________________ This electronic mail (including any attachments) may contain information that is privileged, confidential, and/or otherwise protected from disclosure to anyone other than its intended recipient(s). Any dissemination or use of this electronic mail or its contents (including any attachments) by persons other than the intended recipient(s) is strictly prohibited. If you have received this message in error, please notify us immediately by reply e-mail so that we may correct our internal records. Please then delete the original message (including any attachments) in its entirety.

3 9

Mikrotik RouterOS 6 Sensors
by Christian Mladek 22 May '14

22 May '14

Hy observium-users, we're using observium with many devices and all sensors report a correct state. But with Mikrotik RB2011 we're getting temperature and voltage warnings from "System 0". The reported values seem ok, but the thresholds are wrong. e.g. temperature 0C - 5.6C, voltage 1.04V - 1.4V how can we fix this behaviour? screens attached: [cid:image001.png@01CF75D6.499A3DD0] [cid:image002.png@01CF75D6.499A3DD0] Thx, Ing. Christian Mladek hotze.com GmbH A-6020 Innsbruck, Eduard-Bodem-Gasse 6 Telefon: +43 512 353640-0 Fax: +43 512 353640-50 Support: DW 910 Verkauf: DW 920 Buchhaltung: DW 930 Informationen gem. UGB: FB Nr. 287217d, LG Innsbruck, vgl. http://impressum.hotze.com/ Sämtliche Leistungen werden ausschliesslich auf Grundlage unserer AGB erbracht, diese können Sie hier nachlesen: http://www.hotze.com/ueber_uns/agb/

2 2

Alerting
by Jeremy Alberts 22 May '14

22 May '14

Hello, Is it possible to configure an alert on certain syslogs? With kind regards, Jeremy

2 1