- observium - lists.observium.org

Parent Devices
by Luis Piña 09 Oct '19

09 Oct '19

Hello, I am trying to make an Alert for a Parent Device, but I need the sons devices doesn´t alert. I doi have an nt know how to say, but example. If a had a switch alerted, I don´t want an Alert of the devices connected to it. Tnks

3 3

r9999 | mike | 2019-08-21 14:08:57 +0000 (Wed, 21 Aug 2019) | 4 lines
by Jacek.Dabrowski＠selgros.pl 07 Oct '19

07 Oct '19

Hello, I see support for Delta UPS, does this include DELTA -RT Series UPS? I have a few and it doesn't work --------------------------------------------------------------------------------------------------------- >From changelog: r9999 | mike | 2019-08-21 14:08:57 +0000 (Wed, 21 Aug 2019) | 4 lines Improved support for Delta UPS, added Delta mib files. Small code cleanup before stable. -------------------------------------------------------------------------------------------------------- Pozdrawiam Jacek Dąbrowski

5 7

Saving changes to a large number of sensors
by Robert Williams 07 Oct '19

07 Oct '19

Hi, It seems that on a couple of Cisco ASR9k devices (with exceptionally large counts of sensors) we are now unable to save changes to them. Specifically, setting custom values and enabling or disabling alerts for individual sensors. Now, I remember that during Observium setup (a _long_ time ago) there was a step for amending either PHP or MySQL to allow a very long POST or query or something, which is required when you update a page with hundreds of boxes and buttons on it. I’m assuming either these devices have grown to the point where this setting is no longer adequately large, or perhaps the setting on the server has been inadvertently changed. Either way – I literally cannot remember (or find) the damn setting anywhere. Can someone remind me what it is please? Thanks! Robert Williams Custodian Data Centres https://www.CustodianDC.com

1 0

unsubscribe
by Erimer, Tarkan 07 Oct '19

07 Oct '19

1 0

Reset interface graph after upgrade the router
by Laszlo Nemeth 03 Oct '19

03 Oct '19

Hello, I upgraded our Cisco ASR router, and after the upgrade all of ports graphs cleared, so at this moment i have 4 interfaces with 2 days old graphs. I think port ID or something similar things are changed. So now i have 4 files that not touched in the last 2 days: port-19.rrd port-20.rrd port-21.rrd port-3.rrd I think this is the 4 missed graphs. The question is: how can i figure out which rrd means witch interface? From the database or somehow? If i can pair the old rrd and the new rrd i can merge them i think but at this moment i missed the traffic graphs in the last 3 years :) Thanks Laszlo -- László Németh Senior Network Engineer [emarsys]<http://www.emarsys.com/> Emarsys-Technologies Kft Kossuth Lajos utca 7-9. II. emelet 1053 Budapest T: +36 1 781 6001<tel:+36%201%20781%206001> E: laszlo.nemeth(a)emarsys.com<mailto:laszlo.nemeth@emarsys.com> W: www.emarsys.com<http://www.emarsys.com> » Get the latest insight from Emarsys<http://emarsys.com/en/resources/whitepapers/> This email and any attachments contain confidential information for the intended recipient to which it has been addressed. This information may not be copied nor disclosed to any third party without prior permission of the sender. If you are not the intended recipient, or if received in error, please contact the sender immediately and delete this email from your system. emarsys eMarketing Systems AG does not accept responsibility for losses and any other damages resulting from information, including viruses and other harmful content, contained in this email and any attachments.

3 2

Changing graph colours to improve readability
by Brandwatch NOC 02 Oct '19

02 Oct '19

Hi, I'm just wondering, has anyone dabbled with getting rrdtool to use more contrasting colours for composite graphs? We have some graphs, such as peering graphs, that are made up of 15+ components, and each component is currently a nearly identical shade of green or purple, which means that even with the legend enabled it is very difficult to see which component is which. I'm imagining that instead of using shades of green, you could use a rainbow of very distinctly different colours and readability would improve. I'm interested to hear whether anyone has tried to do this before, or if it's a non-starter for some reason. Thanks, Chris -- Chris Tomkins | Senior Network Engineer (Linux/Network) christ(a)brandwatch.com Office: +44 (0)1273 448 949 NEW YORK | BOSTON | BRIGHTON | LONDON | BERLIN | STUTTGART | PARIS | SINGAPORE | SYDNEY <https://www.brandwatch.com/blog/digital-consumer-intelligence/>

1 0

SMTP Settings
by Lierman, Andrew 30 Sep '19

30 Sep '19

What and where do I need to configure in Observium for SMTP settings so that I can receive email alerts? Any mail application better mail vs sendmail? I setup email settings in the config.php but I never receive an email. Thanks, -- *Confidentiality Notice:* This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. The views expressed in this transmission are not necessarily the views of the School District of Altoona.

3 3

I was able to run my svn update before, but cannot anymore.
by Dana Bostic 27 Sep '19

27 Sep '19

I am looking for suggestions. When I run: svn co http://svn.observium.org/svn/observium/branches/stable observium it just sits there. I am behind a proxy and was able to do two updates in the past, but cannot anymore for some reason. I have verified my settings for the proxy (in ~/.subversion/servers). I would believe that was the issue, but they have not changed since a few months ago when I last updated. I thought it might be authentication issues, so I went to http://svn.observium.org/svn/observium/branches/stable and can use my username and password to get in, works fine. I have removed all authentication (from /root/.subversion/auth) and put in my username and password again at the prompt, still it just sits there. Any suggetions? [Telescope Separator] Dana Bostic Technology Specialist Caterpillar Inc. 954 NC 42 East, Clayton, NC 27527 email: bostic_dana_r(a)cat.com<mailto:bostic_dana_r@cat.com> | phone: 919-550-1260 Caterpillar: Confidential Green

2 1

Rename Ports in OBS
by Wissen, Tobias (EDV) 27 Sep '19

27 Sep '19

Hi, is it possible to rename Ports in OBS? I don´t have the possibility to connect to the device. Mit freundlichen Grüßen Tobias Wissen BERDING BETON GmbH Verwaltung Steinfeld * EDV * Industriestr. 6 * 49439 Steinfeld Tel: 05492 87 290 * Mobil: 0151-14823618 * Fax: 05492 87 295 * E-Mail: t.wissen(a)berdingbeton.de<mailto:t.wissen@berdingbeton.de> Gf: Georg Berding sen., Georg Berding jun., Matthias Hansen, Gert Waltermann * Sitz: 49439 Steinfeld * Registergericht AG Oldenburg: HRB 110334 * USt-ID-Nr.: DE 811247624 * Der Inhalt dieser E-Mail kann vertrauliche und/oder rechtlich geschützte Informationen enthalten und ist ausschließlich für den bezeichneten Adressaten bestimmt. Wenn Sie nicht der vorgesehene Adressat dieser E-Mail oder dessen Vertreter sein sollten, informieren Sie bitte den Absender und löschen Sie die E-Mail. Das unerlaubte Kopieren, Veröffentlichen sowie die unbefugte Weitergabe ist nicht gestattet. ________________________________

1 0

Observium Cisco MIB
by Lierman, Andrew 26 Sep '19

26 Sep '19

I found this MIB on the Observium MIB list, I noticed it was not part of my Observium install. Is there a way to make a part of it? I have some voice routers that I want to monitor. https://mibs.observium.org/mib/CISCO-POP-MGMT-MIB/ -- *Confidentiality Notice:* This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. The views expressed in this transmission are not necessarily the views of the School District of Altoona.

2 5