- observium - lists.observium.org

Can't Add Device
by Talk Jesus 28 Sep '16

28 Sep '16

Trying to add my secondary trunked switch, but I get this error "Could not ping switch2.mydomain.com." I ran a DNS lookup on that hostname and it shows the records fine and the switch (#2) accurately. I tried adding the device using the same setup as the original switch that's already there: port 161, udp transport, v2c protocol version, snmp community same as primary. I can ping the hostname too, not sure why Observium cannot.

2 5

False positives on Device Alerts
by Timothy Kaufman 27 Sep '16

27 Sep '16

We have an SE installation with about 260 devices being checked. We have alerting setup for various services or checks. Often we see false positives on the SNMP device down alert, for example devices will report SNMP down when they are not really down. After a second or even third SNMP check we see a recovery and the uptime shows no outage. I also verify this by doing and snmpwalk from observium while the “alert” is active. Is there anything we can check or begin to look to find the cause. The server is not overloaded, with either memory or processor. We are running 25 poller wrappers with a complete polling time of about 300 seconds. Thanks, Tim

4 5

Poll Observium Agent using TLS
by Matthias Gabathuler 27 Sep '16

27 Sep '16

1 0

Observium with smokeping and rrdcached
by Lyndon Labuschagne 27 Sep '16

27 Sep '16

Hi is it possibly to get smokeping integrated with Observium if you are using rrdcached? I get permissions issues, but id I disable rrdcache then I can see the smokeping graphing?

1 0

Re: [Observium] Sensors auto-deleted and re-added.
by Henrik Cednert (Filmlance) 27 Sep '16

27 Sep '16

And now it have started to do it frequently. =( Never had this issue before. Anyone with a clue to why it’s happening? 2016-09-24 06:40:58 netbotz01 Sensor deleted: humidity apc memSensorsHumidity.0.4 Temp/humid 2016-09-24 06:40:58 netbotz01 Sensor deleted: temperature apc memSensorsTemperature.0.4 Temp/humid 2016-09-24 06:40:53 netbotz01 Temp/humid Sensor added: temperature apc emsProbeStatusProbeTemperature.4 Temp/humid 2016-09-24 06:40:53 netbotz01 Temp/humid Sensor added: humidity apc emsProbeStatusProbeHumidity.4 Temp/humid 2016-09-24 00:37:49 netbotz01 Sensor deleted: humidity apc emsProbeStatusProbeHumidity.4 Temp/humid 2016-09-24 00:37:49 netbotz01 Sensor deleted: temperature apc emsProbeStatusProbeTemperature.4 Temp/humid 2016-09-24 00:37:45 netbotz01 Sensor added: humidity apc memSensorsHumidity.0.4 Temp/humid 2016-09-24 00:37:45 netbotz01 Sensor added: temperature apc memSensorsTemperature.0.4 Temp/humid 2016-09-23 18:38:05 netbotz01 Sensor updated (limits): limit_low -> "0" 2016-09-23 12:40:44 netbotz01 Sensor deleted: humidity apc memSensorsHumidity.0.4 Temp/humid 2016-09-23 12:40:44 netbotz01 Sensor deleted: temperature apc memSensorsTemperature.0.4 Temp/humid 2016-09-23 12:40:40 netbotz01 Sensor added: temperature apc emsProbeStatusProbeTemperature.4 Temp/humid 2016-09-23 12:40:40 netbotz01 Sensor added: humidity apc emsProbeStatusProbeHumidity.4 Temp/humid 2016-09-23 06:38:32 netbotz01 Sensor deleted: humidity apc emsProbeStatusProbeHumidity.4 Temp/humid 2016-09-23 06:38:32 netbotz01 Sensor deleted: temperature apc emsProbeStatusProbeTemperature.4 Temp/humid 2016-09-23 06:38:28 netbotz01 Sensor added: humidity apc memSensorsHumidity.0.4 Temp/humid 2016-09-23 06:38:28 netbotz01 Sensor added: temperature apc memSensorsTemperature.0.4 Temp/humid -- Henrik Cednert cto | compositor Filmlance International | www.filmlance.se mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ] On 2016-09-21, 14:05, "observium on behalf of Henrik Cednert (Filmlance)" <observium-bounces(a)observium.org on behalf of henrik.cednert(a)filmlance.se> wrote: Hey Anyone with an idea to why this would happen on its own? 2016-09-21 12:38:54 Sensor deleted: humidity apc emsProbeStatusProbeHumidity.4 Temp/humid 2016-09-21 12:38:54 Sensor deleted: temperature apc emsProbeStatusProbeTemperature.4 Temp/humid 2016-09-21 12:37:58 Temp/humid Sensor added: humidity apc memSensorsHumidity.0.4 Temp/humid 2016-09-21 12:37:58 Temp/humid Sensor added: temperature apc memSensorsTemperature.0.4 Temp/humid An APC/Schneider Netbotz200. Cheers -- Henrik Cednert cto | compositor Filmlance International | www.filmlance.se mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ] _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

No devices found
by Skelkelos 25 Sep '16

25 Sep '16

Hi, I am having an issue with latest Observium release 0.16.9.8086 (9th September 2016), after updating to latest revision the discovery/polling is still working fine according to logs, however the web interface shows 'No devices found' and can't access any data. Any hints on how to solve this issue or investigate further ? Resetting the search parameters doesn't help. Best regards, Alessandro

2 5

Disabled devices showing on front page
by Ben Hohnke 25 Sep '16

25 Sep '16

Hi Guys, We updated our observium installation yesterday, and since then we're getting alerts (from the alert module) and front page alerts for devices that are disabled. The version we're running is 0.16.9.8092 (rolling). I really don't want to delete these devices, as the historical data is useful.. [image: pasted1]

3 3

Storage not showing all filesystems
by andres fariña 23 Sep '16

23 Sep '16

Hi All, I have an issue at this Observium version: *Observium* 0.16.8.8068 (23rd August 2016) *OS* Linux 3.0.101-0.7.17-default [amd64] (SUSE LINUX 11) *Apache* Apache *PHP* 5.6.9 (OPcache: ENABLED) *Python* 2.6.9 *MySQL* 5.6.27-log (extension: mysqli 5.0.11-dev) *SNMP* NET-SNMP 5.4.2.1 *RRDtool* 1.4.7 >From snmpwalk I can see filesystems: HOST-RESOURCES-MIB::hrStorageDescr.31 = STRING: / HOST-RESOURCES-MIB::hrStorageDescr.35 = STRING: /boot HOST-RESOURCES-MIB::hrStorageDescr.36 = STRING: /dev/shm HOST-RESOURCES-MIB::hrStorageDescr.41 = STRING: /audios/voicemails But at Observium I only got these two: Any ideas? Regards, Andrés

3 4

Port Alerts
by Peter Smith 23 Sep '16

23 Sep '16

Hi, I am not sure if this is the correct place to ask this question but I am interested in setting up alerts for key ports only. I have setup the example which shows Enabled ports which are currently down: Tests ifAdminStatus equals up ifOperStatus notequals up Entity Match ifType equals ethernetCsmacd However I cannot work out how to refine it further - such as trunk ports only or if the port description contains a string, such as "CORE". We would like to know when key ports go down only. I have tried adding: ifAlias equals *CORE* and similar configuration but I expect I have the syntax incorrect. The idea would be to alert on either ports containing a certain word in their description or on tagged/trunk ports. I also tried to find a location to search the old emails from this mailing list but have been unable to find it. Many thanks, Peter

2 2

Alert check for only one Nexus Fex modul
by Laszlo Nemeth 22 Sep '16

22 Sep '16

Hello I have a Nexus switch (hostname is sw01) with lot of FEX. I would like to check only one FEX (fex name is Fex-120) Die-1 temperature value. I go to Devices > Network and select „sw01” device, select Health > Temperature and there i see every FEX sensors. [cid:image001.png@01D214BB.99AFC980] So i would like to create a check for Fex-120 Die-1 if over 45C i would like to get an alert. I tried to create alert check but i am not able to set up correctly. This check get all of FEX temperatures: Device Match: hostname match sw01 Entity Match: sensor_class equals temperature Check Conditions: sensor_value greater 45 What i have to modofiy to get only the requested FEX’s Die-1 temperature? Thanks Laszlo

1 0