- observium - lists.observium.org

recommend power switch
by Simon Smith 20 Jan '15

20 Jan '15

Hi All, this is just an email to ask what people think about networked power supply? whats the best brand in there mind? what ones do you use? but oversally, do they work with Observium? can you monitor the currents and stuff correctly? I’m looking at upgrading our very old APC one as it doesn’t support monitoring by SNMP, and wanted to see what people have or recommend regards Simon

2 1

Integration question about smokeping
by Nate Mellendorf 19 Jan '15

19 Jan '15

While looking at the list of tools that are supported within Observium, I found this neat "patch" for Smokeping: http://jira.observium.org/browse/OBSERVIUM-1075 I'm half tempted to try and implement the proposed solution, as our support staff loves the colored graphs for packet loss. That said, I was curious if this is something you plan to implement into Observium in the near future. I ask, as I'm worried that adding this patch in before it's officially supported could break something for us down the road. Thanks in advance for your opinion on this. It will be well received and is greatly appreciated. Regards, Nate Mellendorf | Network Analyst | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 www.NetgainHosting.com<http://www.netgainhosting.com/> [cid:image003.png@01D03046.E119C1F0] ________________________________ The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure. If you have received this message in error, please notify the sender immediately and delete the original. Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited.

3 4

Custom Pages for Specific Graphs
by LCJones 15 Jan '15

15 Jan '15

Folks, We are running the subscription package of Observium. Hope this doesn't seem too lame a question after reading the Doc's/FAQ's. Perhaps and most likely, I have missed something. I understand and have created custom_traffic frontpage graphs which are handy. Is there a way to create custom pages with specifically chosen graphs? -- L.C. Jones Mikrotec Hosting/Data Center 1001 Winchester Road Lexington, KY. 40505 lcjones-(a)-mikro-data.net

1 0

distro script not detect mailcleaner
by Simon Smith 15 Jan '15

15 Jan '15

Hi All, just an update on a BUG I found I use the 2014 Community edition of Mailcleaner - http://www.mailcleaner.org/ <http://www.mailcleaner.org/> but the Disto script doesn’t detect it at all the script seems to be looking for the file - /etc/mailcleaner/etc/mailcleaner/version.def it should be looking for /usr/mailcleaner/etc/mailcleaner/version.def please can you update the SVN distro script :) regards Simon

2 2

Observium on CentOS 7
by Florian Miesenberger 15 Jan '15

15 Jan '15

Hello, this is my first posting on a mailing list so excuse me if I do something wrong ;-) My question is: Does anybody already got Observium work on CentOS 7? Greetz from Austria Florian Miesenberger

4 5

Map location problems after switching to the Pro version
by Richard Kuhns 14 Jan '15

14 Jan '15

Hello, We had been running the community version of Observium for a few weeks. I set the syslocation for each device, and when using the Google API each device appeared on the map exactly where it should. I used google instead of mapquest because when using mapquest a number of locations were wrong even though I used the exact address mapquest.com showed when I looked it up. We recently went Pro, and it's well worth the money. However, the map is no longer useful. We currently have 62 devices we're monitoring, all within a small geographic area in central Indiana around Lafayette. 61 of the 62 devices show up within a single block around our default latitude & longitude. For example, in the event log I find an entry for mulberry-sw1: 2015-01-14 09:25:00 mulberry-sw1 System Geolocation (GOOGLE) -> [40.420760, -86.890249] United States (Country), Indiana (State), Tippecanoe County (County), Lafayette (City) This is just wrong. The actual location string for this device (which has been untouched since it worked correctly for the community version) shows that it's in Mulberry, Indiana. That's even in a different county. Am I doing something wrong? Any help would be greatly appreciated. Thanks! -- Richard Kuhns <rjk(a)wintek.com> Main Number: 765-742-8428 Wintek Corporation Direct: 765-269-8541 427 N 6th Street Internet Support: 765-269-8503 Lafayette, IN 47901-2211 Consulting: 765-269-8504

4 5

Observium RANCID best practices
by Pedrosi, Derek G. 14 Jan '15

14 Jan '15

What is the proper configuration for having Observium and RANCID on separate boxes, and still have versioning with RANCID? Currently we just mount a share from our RANCID box to Observium, this give the current configs, but not the versioning. Regards, derek

3 2

RANCID and Git mode
by krause＠rus.uni-stuttgart.de 14 Jan '15

14 Jan '15

Hi, to get the RANCID mode working on my Debian wheezy I needed to tweak the code a bit. If anyone is interested in the diff, here goes: -(snip)- --- a/html/pages/device/showconfig.inc.php +++ b/html/pages/device/showconfig.inc.php @@ -39,7 +39,9 @@ if ($_SESSION['userlevel'] >= 5) if (!$rev['count'] && is_executable($config['git'])) { $cmd_dir = escapeshellarg(dirname($device_config_file)); - $gitlogs = external_exec($config['git'].' --git-dir='.$cmd_dir.' log --pretty=format:"%h %ci" '.$cmd_file); + $git_file = escapeshellarg(basename($device_config_file)); + $git_dir = escapeshellarg(dirname($device_config_file) . '/.git'); + $gitlogs = external_exec($config['git'].' --git-dir='.$git_dir.' log --pretty=format:"%h %ci" -- '.$git_file); foreach (explode("\n", $gitlogs) as $line) { // b6989b9 2014-11-10 00:16:53 +0100 @@ -109,8 +111,10 @@ if ($_SESSION['userlevel'] >= 5) $prev_name = 'r'.$rev['prev']; break; case 'git': - $cmd_cat = $config['git'].' --git-dir='.$cmd_dir.' show '.$rev['curr'].':'.escapeshellarg(basename($device_config_file)); - $cmd_diff = $config['git'].' --git-dir='.$cmd_dir.' diff '.$rev['prev'].' '.$rev['curr'].' '.$cmd_file; + $git_file = escapeshellarg(basename($device_config_file)); + $git_dir = escapeshellarg(dirname($device_config_file) . '/.git'); + $cmd_cat = $config['git'].' --git-dir='.$git_dir.' show '.$rev['curr'].':'.$git_file; + $cmd_diff = $config['git'].' --git-dir='.$git_dir.' diff '.$rev['prev'].' '.$rev['curr'].' -- '.$git_file; $prev_name = $rev['prev']; } $device_config = external_exec($cmd_cat); -(snip)- If I didn't work around that, I'd just get the last version and no history/diff. Running the relevant git commands, I was receiving both: "fatal: Not a git repository:" and "fatal: ambiguous argument '...': unknown revision or path not in the working tree." ...and since we don't use RANCID itself, but some script that does store our configs with a *.cfg extension, I've also needed to patch: -(snip)- --- a/html/includes/functions.inc.php +++ b/html/includes/functions.inc.php @@ -1308,7 +1308,7 @@ function get_rancid_filename($hostname, { global $config; - $hostnames = array($hostname); + $hostnames = array($hostname . '.cfg'); if ($rdebug) { echo("Hostname: $hostname<br />"); } @@ -1319,6 +1319,8 @@ function get_rancid_filename($hostname, if ($shortname != $hostname) { + // FIXME: as long as RUS nmm does store with .cfg extension + $hostnames[] = $shortname . '.cfg'; $hostnames[] = $shortname; if ($rdebug) { echo("Hostname different from short hostname, looking for both<br />"); } } @@ -1326,6 +1328,8 @@ function get_rancid_filename($hostname, // Addition of a domain suffix for non-FQDN device names. if (isset($config['rancid_suffix']) && $config['rancid_suffix'] !== '') { + // FIXME: as long as RUS nmm does store with .cfg extension + $hostnames[] = $hostname . '.' . trim($config['rancid_suffix'] . '.cfg', ' .'); $hostnames[] = $hostname . '.' . trim($config['rancid_suffix'], ' .'); if ($rdebug) { echo("RANCID suffix configured, also looking for " . $hostname . '.' . trim($config['rancid_suffix'], ' .') . "<br />"); } } -(snip)- The reason is that we have a config with and without ACLs and I'm still pondering whether it'd not be better for our admins to be able to select both variants from the WebUI too. Best regards, Kilian -- Kilian Krause Netze und Kommunikationssysteme (NKS) Informations- und Kommunikationszentrum der Universität Stuttgart (IZUS) Technische Informations- und Kommunikationsdienste (TIK, ehem. RUS) Tel.: +49 (711) 685-64512 Fax.: +49 (711) 685-54512 (PC) Fax.: +49 (711) 68 23 57 Allmandring 30a 70550 Stuttgart DEUTSCHLAND

1 0

Permissions LDAP users
by fcj＠caciis.com 14 Jan '15

14 Jan '15

Hello, I use OpenLDAP to authenticate my users. Or i can grant permissions for my users in group admin but not in my group supervision. It's empty Do you have an idea ? This is my LDAP configuration $config['auth_ldap_version'] = 3; $config['auth_ldap_server'] = "192.168.10.5"; $config['auth_ldap_port'] = 389; $config['auth_ldap_starttls'] = FALSE; $config['auth_ldap_suffix'] = ",dc=exemple,dc=com"; $config['auth_ldap_prefix'] = "uid="; $config['auth_ldap_group'] = array( "cn=admins,ou=groups,dc=exemple,dc=com", "cn=supervision,ou=groups,dc=exemple,dc=com" ); $config['auth_ldap_groupbase'] = "cn=supervision,ou=groups,dc=exemple,dc=com"; $config['auth_ldap_binddn'] = "uid=binduser,dc=exemple,dc=com"; // Initial LDAP bind dn and password, leave empty for bind with user's d $config['auth_ldap_bindpw'] = "bindpasswd"; $config['auth_ldap_objectclass'] = "inetOrgPerson"; $config['auth_ldap_groupmembertype'] = "nodn"; $config['auth_ldap_groupmemberattr'] = "memberUid"; $config['auth_ldap_groups']['admins']['level'] = 10; $config['auth_ldap_groups']['supervision']['level'] = 5; Thank you.

1 0

Weathermap
by Gavin Henry 14 Jan '15

14 Jan '15

Hi all, Found this http://blog.best-practice.se/2014/07/using-php-weathermap-with-observium.ht… Really handy! -- Kind Regards, Gavin Henry.

2 1