- observium - lists.observium.org

aggregate alert emails?
by Zhenhui Liang 22 Dec '14

22 Dec '14

Hi, Is it possible to aggregate alert emails? When a switch does fail, it might generate thousands of alerts. For our case maybe even thousands of txt messages to a pager. Is it possible to configure observium to detect such kind of massive alerts and aggregate them to only send a few alerts out? Thanks. —Zhenhui

6 9

Bad location - lat\long?
by Mike Hammett 22 Dec '14

22 Dec '14

I put the lat/long that GMaps reports for a given location into the SNMP location. When I search for that lat\long in GMaps, it goes to the correct location. When I look at the Observium map, it's about 2 miles off, straight south. I have included screen shots of the different positions and coordinates. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com

2 1

Map questions
by John Brown 22 Dec '14

22 Dec '14

Hi I have a couple of questions about the google map on Observium: 1. Is there away to have the map center on a point and zoom into that point to a certain level of zoom, as the default. The reason I ask is we have most of our infra-structure in a single city, and a few "interconnection / peering pop's" in other states. For normal use we would prefer that the default location and zoom level be on our core service city. 2. Is there away to have a KML/KMZ file added into the map being displayed by Observium. For example, it would be handing to show our fiber ring along with the tear drop icons that Observium displays. As extra credit it would be nice to render a polygon either Green, Yellow or Red depending on status.... Thanks

1 0

Re: [Observium] FW: Observium mailing list
by Nate Mellendorf 21 Dec '14

21 Dec '14

I believe this can be marked as resolved. All of our devices were listed as offline this morning, which was caused by the following: http://www.observium.org/wiki/FAQs#All_my_hosts_seem_down_to_Observium_.2F_… I followed the guide, and removed .index from the noted directory. As soon as I did that, everything started polling again. At around the same time, I also found this: http://www.observium.org/wiki/Poller-wrapper.py Our poller was set to use 3 threads, so I bumped it up to 12. After review, I found that my alert checker was now listing devices as checking in and passing the offline test. I faked an outage on a test device, which triggered the e-mail alert. Thanks again for the assistance on this. I'll have to dig into the snmp bug a little bit, but all is now working as it should. Regards, Nate Mellendorf | Network Analyst | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 www.NetgainHosting.com<http://www.netgainhosting.com/> [cid:image002.png@01D01D29.BE602120] ________________________________ The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure. If you have received this message in error, please notify the sender immediately and delete the original. Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited. From: Nate Mellendorf Sent: Saturday, December 20, 2014 7:46 PM To: observium(a)observium.org Subject: RE: observium Digest, Vol 53, Issue 102 Tom, Thank you very much for looking at my configuration. I failed to note earlier, that I receive the same results when I change the delay of this alert back down to 0. For the sake of my own sanity though, I went back and changed it just now. I triggered a false device outage, which failed to trigger the alert. Something odd I am seeing, is that Observium is now listing 8 devices as having passed the alert check, with 464 devices still listed as never checked. As you can see from my screen shots earlier, that the alert checked never listed any devices as having been successfully checked. They were all greyed out. As you've confirmed that the alert checker is configured correctly, I'm somewhat stumped. I'll keep digging, as this is a feature I'd really like to get working. Side Note: Our CPU and RAM are not hitting 100% utilization on our host, so now I'm suspicious of we're just pushing the Observium platform a little too hard. There are occasions when loading Observium takes longer than expected. When I create a new alert and regenerate them, the page seems to timeout. (I've included the graphs of our disk I/O, as It's been suggested before as something to keep an eye on.) Any other thoughts or insight on this would be greatly appreciated. Thanks again for your time on both the project and on this thread. [cid:image004.jpg@01D01D29.BE4F3130] Regards, Nate Mellendorf | NETWORK ANALYST | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 www.NetgainHosting.com The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure. If you have received this message in error, please notify the sender immediately and delete the original. Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited. -----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of observium-request(a)observium.org Sent: Saturday, December 20, 2014 7:06 PM To: observium(a)observium.org Subject: observium Digest, Vol 53, Issue 102 Send observium mailing list submissions to observium(a)observium.org<mailto:observium@observium.org> To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org<mailto:observium-request@observium.org> You can reach the person managing the list at observium-owner(a)observium.org<mailto:observium-owner@observium.org> When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: FW: Observium mailing list (Tom Laermans) ---------------------------------------------------------------------- Message: 1 Date: Sun, 21 Dec 2014 02:06:09 +0100 From: Tom Laermans <tom.laermans(a)powersource.cx<mailto:tom.laermans@powersource.cx>> To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Subject: Re: [Observium] FW: Observium mailing list Message-ID: <54961D01.3070002(a)powersource.cx<mailto:54961D01.3070002@powersource.cx>> Content-Type: text/plain; charset="windows-1252"; Format="flowed" Hi Nate, You set the "delay" to 1 which means Observium will wait 1 extra poll to see if the alert condition restores itself (which it seems to do judging by your alert log - hence no alert). Tom On 18/12/2014 04:09, Nate Mellendorf wrote: > > Good evening all, > > After much trial and error, I?ve been unsuccessful in implementing a > simple up/down device alert within Observium. > > As I searched around the web for a solution, It seemed as though this > hasn?t been much of an issue for most users. > > Here?s some additional documentation I followed to try and fix it myself: > > http://www.maartenmoerman.nl/?p=612(Nice work on this one) > > https://www.mail-archive.com/observium@observium.org/msg05915.html > > http://www.observium.org/wiki/FAQ > > http://www.observium.org/wiki/Creating_an_Alert_Checker > > I?m starting think that my configuration file (config.php) could have > something to do with it. I?ve included it, along with multiple > snip-its to try and assist you in seeing my work. > > If anyone has any suggestions on this, they would be greatly > appreciated. I?ve been working on this on and off for the past few > days now, and I?ve had no success in generating an offline alert.The > alert log shows the test as failed, but delayed. It never actually > send out an e-mail. My apologies in advance, if this turns out to be > user error. > > Thanks in advance for any time put into this. If there is anything > else I can provide to further assist in troubleshooting, please let me > know. > > I?d be more than happy to provide it. > > *Omitted config.php:* > > *?* > > // Enable alerter > > $config['poller-wrapper']['alerter']= TRUE; > > // Disable page refresh > > $config['page_refresh']= "300";## Refresh the page every xx seconds > > // Set up a default alerter (email to a single address) > > $config['email']['default']= "nate.mellendorf(a)netgainhosting.com > <mailto:nate.mellendorf@netgainhosting.com>"; > > $config['alerts']['email']['from']= "observium(a)netgainhosting.com > <mailto:observium@netgainhosting.com>"; > > $config['email']['default_only']= TRUE; > > $config['email']['enable']= TRUE;// Disables OLD alerting system > > $config['alerts']['interval']= 310; > > *?* > > /Sensitive information has been omitted./ > > *The alert I?ve configured:*(image)** > > *Here is what I see when I?ve review the alert:*(image)** > > *Here?s the alert log that?s generated:*(image) > > (As you can see, the alert is triggered but delayed.) > > *Finally, here is what?s found when I review the logs of an offline > device:*(image)** > > Thanks again everyone, > > *Nate Mellendorf **|****Network Analyst **|****Netgain** > *720 West Saint Germain Street | St. Cloud | MN | 56301 > Phone: 320.251.4700 x183 *|* 877.797.4700 x183 > *www.NetgainHosting.com* <http://www.netgainhosting.com/>** > > > ---------------------------------------------------------------------- > -- > > The information contained in this email message is for the designated > recipient only and may be privileged, confidential, and protected from > disclosure. If you have received this message in error, please notify > the sender immediately and delete the original. Any dissemination, > distribution, copying or other use of this message or any information > contained within is strictly prohibited. > > > > _______________________________________________ > observium mailing list > observium(a)observium.org<mailto:observium@observium.org> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] observium Digest, Vol 53, Issue 102
by Nate Mellendorf 21 Dec '14

21 Dec '14

Tom, Thank you very much for looking at my configuration. I failed to note earlier, that I receive the same results when I change the delay of this alert back down to 0. For the sake of my own sanity though, I went back and changed it just now. I triggered a false device outage, which failed to trigger the alert. Something odd I am seeing, is that Observium is now listing 8 devices as having passed the alert check, with 464 devices still listed as never checked. As you can see from my screen shots earlier, that the alert checked never listed any devices as having been successfully checked. They were all greyed out. As you've confirmed that the alert checker is configured correctly, I'm somewhat stumped. I'll keep digging, as this is a feature I'd really like to get working. Side Note: Our CPU and RAM are not hitting 100% utilization on our host, so now I'm suspicious of we're just pushing the Observium platform a little too hard. There are occasions when loading Observium takes longer than expected. When I create a new alert and regenerate them, the page seems to timeout. (I've included the graphs of our disk I/O, as It's been suggested before as something to keep an eye on.) Any other thoughts or insight on this would be greatly appreciated. Thanks again for your time on both the project and on this thread. [cid:image002.jpg@01D01C8D.86635E50] Regards, Nate Mellendorf | NETWORK ANALYST | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 www.NetgainHosting.com The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure. If you have received this message in error, please notify the sender immediately and delete the original. Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited. -----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of observium-request(a)observium.org Sent: Saturday, December 20, 2014 7:06 PM To: observium(a)observium.org Subject: observium Digest, Vol 53, Issue 102 Send observium mailing list submissions to observium(a)observium.org<mailto:observium@observium.org> To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org<mailto:observium-request@observium.org> You can reach the person managing the list at observium-owner(a)observium.org<mailto:observium-owner@observium.org> When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: FW: Observium mailing list (Tom Laermans) ---------------------------------------------------------------------- Message: 1 Date: Sun, 21 Dec 2014 02:06:09 +0100 From: Tom Laermans <tom.laermans(a)powersource.cx<mailto:tom.laermans@powersource.cx>> To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Subject: Re: [Observium] FW: Observium mailing list Message-ID: <54961D01.3070002(a)powersource.cx<mailto:54961D01.3070002@powersource.cx>> Content-Type: text/plain; charset="windows-1252"; Format="flowed" Hi Nate, You set the "delay" to 1 which means Observium will wait 1 extra poll to see if the alert condition restores itself (which it seems to do judging by your alert log - hence no alert). Tom On 18/12/2014 04:09, Nate Mellendorf wrote: > > Good evening all, > > After much trial and error, I?ve been unsuccessful in implementing a > simple up/down device alert within Observium. > > As I searched around the web for a solution, It seemed as though this > hasn?t been much of an issue for most users. > > Here?s some additional documentation I followed to try and fix it myself: > > http://www.maartenmoerman.nl/?p=612(Nice work on this one) > > https://www.mail-archive.com/observium@observium.org/msg05915.html > > http://www.observium.org/wiki/FAQ > > http://www.observium.org/wiki/Creating_an_Alert_Checker > > I?m starting think that my configuration file (config.php) could have > something to do with it. I?ve included it, along with multiple > snip-its to try and assist you in seeing my work. > > If anyone has any suggestions on this, they would be greatly > appreciated. I?ve been working on this on and off for the past few > days now, and I?ve had no success in generating an offline alert.The > alert log shows the test as failed, but delayed. It never actually > send out an e-mail. My apologies in advance, if this turns out to be > user error. > > Thanks in advance for any time put into this. If there is anything > else I can provide to further assist in troubleshooting, please let me > know. > > I?d be more than happy to provide it. > > *Omitted config.php:* > > *?* > > // Enable alerter > > $config['poller-wrapper']['alerter']= TRUE; > > // Disable page refresh > > $config['page_refresh']= "300";## Refresh the page every xx seconds > > // Set up a default alerter (email to a single address) > > $config['email']['default']= "nate.mellendorf(a)netgainhosting.com > <mailto:nate.mellendorf@netgainhosting.com>"; > > $config['alerts']['email']['from']= "observium(a)netgainhosting.com > <mailto:observium@netgainhosting.com>"; > > $config['email']['default_only']= TRUE; > > $config['email']['enable']= TRUE;// Disables OLD alerting system > > $config['alerts']['interval']= 310; > > *?* > > /Sensitive information has been omitted./ > > *The alert I?ve configured:*(image)** > > *Here is what I see when I?ve review the alert:*(image)** > > *Here?s the alert log that?s generated:*(image) > > (As you can see, the alert is triggered but delayed.) > > *Finally, here is what?s found when I review the logs of an offline > device:*(image)** > > Thanks again everyone, > > *Nate Mellendorf **|****Network Analyst **|****Netgain** > *720 West Saint Germain Street | St. Cloud | MN | 56301 > Phone: 320.251.4700 x183 *|* 877.797.4700 x183 > *www.NetgainHosting.com* <http://www.netgainhosting.com/>** > > > ---------------------------------------------------------------------- > -- > > The information contained in this email message is for the designated > recipient only and may be privileged, confidential, and protected from > disclosure. If you have received this message in error, please notify > the sender immediately and delete the original. Any dissemination, > distribution, copying or other use of this message or any information > contained within is strictly prohibited. > > > > _______________________________________________ > observium mailing list > observium(a)observium.org<mailto:observium@observium.org> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

FW: Observium mailing list
by Nate Mellendorf 21 Dec '14

21 Dec '14

Good evening all, After much trial and error, I've been unsuccessful in implementing a simple up/down device alert within Observium. As I searched around the web for a solution, It seemed as though this hasn't been much of an issue for most users. Here's some additional documentation I followed to try and fix it myself: http://www.maartenmoerman.nl/?p=612 (Nice work on this one) https://www.mail-archive.com/observium@observium.org/msg05915.html http://www.observium.org/wiki/FAQ http://www.observium.org/wiki/Creating_an_Alert_Checker I'm starting think that my configuration file (config.php) could have something to do with it. I've included it, along with multiple snip-its to try and assist you in seeing my work. If anyone has any suggestions on this, they would be greatly appreciated. I've been working on this on and off for the past few days now, and I've had no success in generating an offline alert. The alert log shows the test as failed, but delayed. It never actually send out an e-mail. My apologies in advance, if this turns out to be user error. Thanks in advance for any time put into this. If there is anything else I can provide to further assist in troubleshooting, please let me know. I'd be more than happy to provide it. Omitted config.php: ... // Enable alerter $config['poller-wrapper']['alerter'] = TRUE; // Disable page refresh $config['page_refresh'] = "300"; ## Refresh the page every xx seconds // Set up a default alerter (email to a single address) $config['email']['default'] = "nate.mellendorf(a)netgainhosting.com<mailto:nate.mellendorf@netgainhosting.com>"; $config['alerts']['email']['from'] = "observium(a)netgainhosting.com<mailto:observium@netgainhosting.com>"; $config['email']['default_only'] = TRUE; $config['email']['enable'] = TRUE; // Disables OLD alerting system $config['alerts']['interval'] = 310; ... Sensitive information has been omitted. The alert I've configured: (image) [cid:image005.jpg@01D01A3D.CD665F70] Here is what I see when I've review the alert: (image) [cid:image006.jpg@01D01A3D.CD665F70] Here's the alert log that's generated: (image) (As you can see, the alert is triggered but delayed.) [cid:image008.jpg@01D01A3D.CD665F70] Finally, here is what's found when I review the logs of an offline device: (image) [cid:image009.jpg@01D01A3D.CD665F70] Thanks again everyone, Nate Mellendorf | Network Analyst | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 www.NetgainHosting.com<http://www.netgainhosting.com/> [cid:image007.png@01D017BA.8560E4A0] ________________________________ The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure. If you have received this message in error, please notify the sender immediately and delete the original. Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited.

5 6

Alerting for applications (with unix-agent)
by Vladislav Solovei 20 Dec '14

20 Dec '14

Hi, all :-) Tell me, please... It is possible to add alert checkers for applications? PowerDNS queries, on example, etc..?

2 1

Script to discovery and poll new devices
by Darian Jimenez 19 Dec '14

19 Dec '14

Hello, I have a quick simple script to go through a text file and add_device, discovery it and poll it. However the only portion that works fine is the add_device. the discovery nor poller.php is actually doing what it should. however If I run the command separately outside of the script it discovers the device as well as polls it. the host name is right because I'm using echo within the script to show the name for each loop. If i use ./disocvery.php -h new that works fine and I guess it's a work around, however ./poller.php -h new does not work. below is the script I'm running. while read host do echo $host /opt/observium/add_device.php $host /opt/observium/discovery.php -h $host /opt/observium/poller.php -h $host done < Servers/dailyserverlist.txt

4 8

Sliding window in graph views
by Brendan Hide 19 Dec '14

19 Dec '14

Good day, all When viewing graphs, I often find that we want to keep a specific graph open for a long period - days or weeks even, and preferably to view the most recent information. A minor issue is that when clicking on the pre-provided thumbnails for the "6 Hours", "24 Hours", et al. graphs, it opens a specific time window. If the page is refreshed after a while, it shows old data rather than current data. A sliding window works already - just that probably very few people know about the "feature". Two minor changes are required to have the thumbnail links refer to the sliding window: Exclude the to= parameter - it appears this defaults to now() Set the from= parameter to an offset The following is an example of a 6-hour sliding window: https://<observium_host>/graphs/device=<devid>/type=device_processor/from=-14400 -- __________ Brendan Hide http://swiftspirit.co.za/ http://www.webafrica.co.za/?AFF1E97

3 3

Re: [Observium] observium Digest, Vol 53, Issue 91
by Nate Mellendorf 18 Dec '14

18 Dec '14

Adam and Joe, Thank you for your feedback on this. It would be nice to have a few default alerts built directly into the platform. That said, I understand that the time needed to implement something like that could be hard to reserve. As for the configuration I submitted, does the behavior of the alert seem to be correct? I was curious of up / down alerting was implemented (as the walkthrough suggests), but has yet to be verified as fully functional. I have an alert that checks for half-duplex interfaces, and it works like a charm. Observium will send off e-mails every 5 minutes about it, but I get nothing about a device status being up or down. We have What's Up Gold taking care of these alerts for now, but that's really all that it's doing. I know there are alternatives to this, but It would be so great to keep everything within Observium. :) Regards, Nate Mellendorf | NETWORK ANALYST | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 www.NetgainHosting.com The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure. If you have received this message in error, please notify the sender immediately and delete the original. Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited. -----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of observium-request(a)observium.org Sent: Thursday, December 18, 2014 1:01 AM To: observium(a)observium.org Subject: observium Digest, Vol 53, Issue 91 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: Observium mailing list (Joseph L. Brunner) ---------------------------------------------------------------------- Message: 1 Date: Thu, 18 Dec 2014 07:00:19 +0000 From: "Joseph L. Brunner" <joe(a)affirmedsystems.com> To: Adam Armstrong <adama(a)memetic.org>, Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Observium mailing list Message-ID: <2E86D2A5DF7FFA40A41B8C7FCA38F8742049FA(a)affmdex2k10.affmdcorp.com> Content-Type: text/plain; charset="utf-8" Not putting the product down ? it?s the best $100 thing in the world. But, I?m saying with logicmonitor ? all things just start coming at you and that?s pretty good. Now, I?m sure they have a major team writing those alerts and you have the $100 a year thing ? I?m saying opening it up on kickstarter ? we would donate ? the Observium interface is better. Just cant seem to get alerts to fire 100% of the time in a relatively quick fashion ? From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, December 18, 2014 01:23 AM To: Observium Network Observation System Subject: Re: [Observium] Observium mailing list I don't even know how we would do that :) What we have now is the most automated I could think of making it. We would have preferred to have some means of default hard-coded alerts, but I've not come up with a good way to do that yet. :) adam. ------ Original Message ------ From: "Joseph L. Brunner" <joe(a)affirmedsystems.com<mailto:joe@affirmedsystems.com>> To: "Observium Network Observation System" <observium(a)observium.org<mailto:observium@observium.org>> Sent: 12/17/2014 11:27:40 PM Subject: Re: [Observium] Observium mailing list Yeah, the alerts suck. We use Observium to wow the business folks ? but use other things to poll and generate an email? They should bite the bullet, do another kickstarter and raise like $200K so the alerts will be AUTO GENERATED and UNIVERSAL for all things it can find ? like logicmonitor. Just to get off logicmonitor I would donate -Joe From: observium [mailto:observium-bounces@observium.org<mailto:observium-bounces@observium.org>] On Behalf Of Nate Mellendorf Sent: Wednesday, December 17, 2014 10:10 PM To: observium(a)observium.org<mailto:observium@observium.org> Subject: [Observium] FW: Observium mailing list Good evening all, After much trial and error, I?ve been unsuccessful in implementing a simple up/down device alert within Observium. As I searched around the web for a solution, It seemed as though this hasn?t been much of an issue for most users. Here?s some additional documentation I followed to try and fix it myself: http://www.maartenmoerman.nl/?p=612 (Nice work on this one) https://www.mail-archive.com/observium@observium.org/msg05915.html http://www.observium.org/wiki/FAQ http://www.observium.org/wiki/Creating_an_Alert_Checker I?m starting think that my configuration file (config.php) could have something to do with it. I?ve included it, along with multiple snip-its to try and assist you in seeing my work. If anyone has any suggestions on this, they would be greatly appreciated. I?ve been working on this on and off for the past few days now, and I?ve had no success in generating an offline alert. The alert log shows the test as failed, but delayed. It never actually send out an e-mail. My apologies in advance, if this turns out to be user error. Thanks in advance for any time put into this. If there is anything else I can provide to further assist in troubleshooting, please let me know. I?d be more than happy to provide it. Omitted config.php: ? // Enable alerter $config['poller-wrapper']['alerter'] = TRUE; // Disable page refresh $config['page_refresh'] = "300"; ## Refresh the page every xx seconds // Set up a default alerter (email to a single address) $config['email']['default'] = "nate.mellendorf(a)netgainhosting.com<mailto:nate.mellendorf@netgainhosting.com>"; $config['alerts']['email']['from'] = "observium(a)netgainhosting.com<mailto:observium@netgainhosting.com>"; $config['email']['default_only'] = TRUE; $config['email']['enable'] = TRUE; // Disables OLD alerting system $config['alerts']['interval'] = 310; ? Sensitive information has been omitted. The alert I?ve configured: (image) [cid:image001.jpg@01D01A66.5E9E3F80] Here is what I see when I?ve review the alert: (image) [cid:image002.jpg@01D01A66.5E9E3F80] Here?s the alert log that?s generated: (image) (As you can see, the alert is triggered but delayed.) [cid:image003.jpg@01D01A66.5E9E3F80] Finally, here is what?s found when I review the logs of an offline device: (image) [cid:image004.jpg@01D01A66.5E9E3F80] Thanks again everyone, Nate Mellendorf | Network Analyst | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 www.NetgainHosting.com<http://www.netgainhosting.com/> [cid:image005.png@01D01A66.5E9E3F80] ________________________________ The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure. If you have received this message in error, please notify the sender immediately and delete the original. Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited.

2 1