- observium - lists.observium.org

VLANs UI question
by Adam Thompson 08 Mar '22

08 Mar '22

I’m using the top-level VLANs view to help identify VLANs we can remove, and it’s remarkably helpful, at least as a starting point. This view identifies that I have, for example, 2 untagged ports on VLAN 6… which is great, but how do I see *which ports* those are? I haven’t been able to find anything I can click on that reveals the port names/numbers, or even which device they’re on. Beyond that, how is it possible to have 2 untagged ports on 0 (zero) devices, in the first place? While we’re at it, in <hostname>/vlan/vlan_id=XYZ/ page, why are the labels “Devices”, “Tagged Ports”, “Untagged Ports” and “MACs” in the banner clickable if they don’t do anything? Help? I’m assuming I’m missing something here. -Adam Adam Thompson Consultant, Infrastructure Services [MERLIN] 100 - 135 Innovation Drive Winnipeg, MB, R3T 6A8 (204) 977-6824 or 1-800-430-6404 (MB only) athompson(a)merlin.mb.ca<mailto:athompson@merlin.mb.ca> www.merlin.mb.ca<http://www.merlin.mb.ca/>

1 0

Not finding an agent-script called 'os'
by Noah 07 Mar '22

07 Mar '22

Installing observium for the first time. :/opt/observium$ cat VERSION Observium CE 21.10.1 I am following the instructions to install the linux agent: https://docs.observium.org/unix_agent/ I am not finding an agent-script called 'os'. Where can I find the agent-script called 'os' ? # ls -1 /usr/lib/observium_agent/scripts-available apache areca-hw asterisk bind ceph crashplan dhcpkit dmi dovecot dpkg drbd edac exim-mailqueue-extended.pl exim-mailqueue.sh exim_stats_process.pl freeradius freeradius.conf.sample freeradius.sh hdarray hddtemp icecast icecast.conf.default ioping ioping.cnf ipmitool-sensor jvm-over-jmx kamailio ksm lighttpd lmsensors lvs_stats memcached mongodb munin munin-scripts mysql mysql.cnf nfs nfsd nginx nsd ntpd nvidia-smi openvpn postfix_mailgraph postfix_qshape postgresql.conf postgresql.pl powerdns powerdns-recursor proxmox-qemu raspberrypi README rpm sabnzbd-qstatus shoutcast shoutcast.conf shoutcast.default.conf temperature unbound varnish virt-what vmwaretools zimbra zyxel-nas326

1 0

User device permissions cleared after upgrade?
by Stempien, Dave 02 Mar '22

02 Mar '22

I can’t say for certain but I recently upgraded from 21.12.11831 (stable) -> 22.2.11898 (stable) and all of our user accounts that had specific device permissions seem to have lost those entries. Is there anything in the upgrade that may have overwritten or otherwise caused those permissions to disappear?

2 1

Any changes to Mikrotik's MIB ?
by Pieter De Wit 27 Feb '22

27 Feb '22

Hi Guys, About 8 hours ago an auto update was applied to a Observium box and following this the CPU graph is gone: This is the only change that I can think of so can someone please confirm this ? A rediscover of the host does “run” the Mikrotik MIB against it but it still fails to find the CPU oids Thanks !

2 4

Change base_url listening port
by Gordon Cheng (gocheng) 24 Feb '22

24 Feb '22

Hi Observium team: We are trying to follow the “Config Option” under: https://docs.observium.org/config_options/ to change the Observium GUI port from default 80 to 8000, by updating “config.php” to: // Change web interface port setting $config['base_url'] = "http://".$_SERVER["observium.abc.com"].":".$_SERVER["8000"]; But it doesn’t work even after reloading apache2. Any suggestion how to make it right? Thanks. - Gordon

3 2

Auto-authenticate for display graph in Weathermap
by Sébastien 65 20 Feb '22

20 Feb '22

Hello, I use PHP WeatherMAP and use graph display via "/graph.php?height=100&width=512&id=1053&type=port_bits&legend=no" The problem is that I have to be authenticated on Observium to display the content of the graph... How to auto-authenticate ? Thanks for your help.

2 1

Re: [Observium] cli to rebuilt alert checkers
by Tony Guadagno 19 Feb '22

19 Feb '22

Ok, clicking the “rebuild” button on the alert checker interface is not really necessary? It will rebuild every 5 min? Tony From: Adam Armstrong via observium<mailto:observium@observium.org> Sent: Saturday, February 19, 2022 11:38 AM To: Observium<mailto:observium@observium.org> Cc: Adam Armstrong<mailto:adama@observium.org> Subject: Re: [Observium] cli to rebuilt alert checkers It’s done automatically at the end of poller/discovery. Adam. Sent from my iPhone On 19 Feb 2022, at 16:32, Tony Guadagno via observium <observium(a)observium.org> wrote: Hi is there a command to rebuild the alert checkers or can it only be done in the gui? thanks Tony _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

cli to rebuilt alert checkers
by Tony Guadagno 19 Feb '22

19 Feb '22

Hi is there a command to rebuild the alert checkers or can it only be done in the gui? thanks Tony

2 1

monitor by ICMP
by Toky ANDRIANASOLO 18 Feb '22

18 Feb '22

Hello, Is it possible to monitor devices by ICMP, we want to have IP availability of a devices that have no snmp activated Thank you and Regards, Toky

3 4

Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert
by Tony Guadagno 17 Feb '22

17 Feb '22

Adam, I finally got this working. I have written up a quick guide to making this work, would it be possible for you to put this in your documentation page for LDAP Authentication? I am sure I will loose it if it is not somewhere obvious Directions for enabling LDAP with TLS when connecting to an LDAP server with a self signed certificate or a CA that the Observium server does not recognize Assumptions: you have already enabled SSL/TLS for ldap on your Microsoft Domain Controller (or other LDAP server) Observium is installed on a Fedora flavor of Linux version 7 or 8 (this might work with Ubuntu but i am not sure the commands are the same) Observium is configured for LDAP AND TLS per the authentication documentation page On the Observium server: yum install php-ldap vim /etc/openldap/ldap.conf make sure these 2 config options are commented out #TLS_CACERTDIR /etc/openldap/certs #TLS_CACERT /etc/openldap/certs/cert.crt Add/Change this config option to either hard or allow TLS_REQCERT hard “hard” means that the LDAP server MUST present a cert and the cert must be trustworthy OR in the trusted cert store (this is the more secure method) “allow” mean that the LDAP server MUST present a cert and the cert can be anything...valid or invalid setting to “hard” is better because it prevents an imposter from stealing the ip address of the LDAP server and intercepting the messages from Observium If you are setting TLS_REQCERT to “hard” then take these additional steps: export the LDAP server cert in b64 format with NO KEY place cert of LDAP server in ‘/etc/pki/ca-trust/source/anchors’ folder run ‘update-ca-trust’ as root Tony From: Adam Armstrong via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 7:29 PM To: 'Observium'<mailto:observium@observium.org> Cc: Adam Armstrong<mailto:adama@observium.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert I’ve never used LDAP, so I’m not really sure how this should be done. You can put the putenv stuff in config.php. So long as the variable is set before LDAP tries to start the connection that should be sufficient. Observium doesn’t have any configuration related to this itself. You just need to coax whatever conglomeration of PHP and OpenLDAP code exists into talking to your LDAP server. You might be able to turn of the cert checking by putting “TLS_REQCERT never” into ldap.conf, probably /etc/openldap/ldap.conf or somewhere similar. Adam. From: Tony Guadagno <tonyg(a)guadagno.org> Sent: 16 February 2022 23:55 To: Observium <observium(a)observium.org> Cc: Adam Armstrong <adama(a)observium.org> Subject: RE: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Adam, I have the cert for my AD server, as I said, I am pretty familiar with this process as I use ldap often for application authentication….what I am not very familiar with is php. Other apps have config options to set the paths for the certs etc. What I need help with is where (specifically) to put the config so that Observium will use it. I have the certs, I just need the syntax You mentioned putenv…where would I put that? It must be somewhere in Observium? Thanks for your help Tony From: Adam Armstrong via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 6:42 PM To: 'Observium'<mailto:observium@observium.org> Cc: Adam Armstrong<mailto:adama@observium.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Whoops: putenv(‘LDAPTLS_CACERT=/path/to/rootca.pem’); Note that this seems to want the CA’s cert, not your server’s cert. Our code doesn’t have any consideration for TLS at all as far as I can see, it should all be transparent to Observium if you get PHP/LDAP into the situation where it accepts your cert. Adam. From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> On Behalf Of Adam Armstrong via observium Sent: 16 February 2022 23:36 To: 'Observium' <observium(a)observium.org<mailto:observium@observium.org>> Cc: Adam Armstrong <adama(a)observium.org<mailto:adama@observium.org>> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Presumably you need to extract your certs in the correct format and direct the commands to them. The LDAP connection is done by PHP’s LDAP module. You just need to work out how to do it with PHP’s module. It’s probably that you could override this globally with the php.ini rather than putting it in the config.php, too. There seems to be half a dozen solutions for making this work, which isn’t uncommon with infrequently used PHP features. There’s also this: putenv('/path/to/rootca.pem'); Adam. From: Tony Guadagno <tonyg(a)guadagno.org<mailto:tonyg@guadagno.org>> Sent: 16 February 2022 21:57 To: Observium <observium(a)observium.org<mailto:observium@observium.org>> Cc: Adam Armstrong <adama(a)observium.org<mailto:adama@observium.org>> Subject: RE: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Adam, sorry for being dense, but do I just add these two lines directly (as is) to the config.php? ldap_set_option(null, LDAP_OPT_X_TLS_CACERTDIR, '/path/to'); ldap_set_option(null, LDAP_OPT_X_TLS_CACERTFILE, '/path/to/cert.pem'); I tried this with the paths to my certs and it had no affect. Do I need to wrap those command in some other syntax? thanks Tony From: Adam Armstrong via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 4:25 PM To: 'Observium'<mailto:observium@observium.org> Cc: Adam Armstrong<mailto:adama@observium.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert https://andreas.heigl.org/2020/01/31/handle-self-signed-certificates-with-p… I’d assume that getting your cert and putting the two ldap_set_option() commands into config.php should suffice. This seems like a better solution that turning off cert verification. Adam. From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> On Behalf Of Tony Guadagno via observium Sent: 16 February 2022 21:03 To: Observium <observium(a)observium.org<mailto:observium@observium.org>>; Brandon Lund <brandon(a)kansas.net<mailto:brandon@kansas.net>> Cc: Tony Guadagno <tonyg(a)guadagno.org<mailto:tonyg@guadagno.org>> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert I made a packet capture on the Observium server trying to login and if you look, you will see that it is indeed a self signed issue. How do I tell Observium to either trust the cert OR ignore the fact that it is self signed?? [cid:image002.png@01D8240F.9412F790] Tony From: Tony Guadagno via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 3:27 PM To: Brandon Lund<mailto:brandon@kansas.net>; Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Sorry, I should have been more specific…I already have other apps using ldap with tls hitting the server and they work…so I am confident my AD server is properly configured. I work a lot with ldap and I often find that some apps that integrate with ldap and tls get picky about the cert..thats why I think it might be the fact that I am using a self signed cert (which is common on AD servers). Usually, there is a way to tell the application “ignore the fact that it is self signed, accept it anyway” Tony From: Brandon Lund<mailto:brandon@kansas.net> Sent: Wednesday, February 16, 2022 3:08 PM To: Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: LDAP auth to MS AD with TLS Self Signed Cert looks like you need to enable tls for ad to start listing for ldaps no experience just a quick search. https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl… [Image removed by sender.]<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> Enable Lightweight Directory Access Protocol (LDAP) over Secure Sockets Layer (SSL) - Windows Server | Microsoft Docs<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> docs.microsoft.com Describes how to enable LDAP over SSL with a third-party certification authority. Thanks Brandon Lund KansasNet Internet Services 785-776-1452 From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Tony Guadagno via observium <observium(a)observium.org<mailto:observium@observium.org>> Sent: Wednesday, February 16, 2022 1:49 PM To: Tony Guadagno via observium Cc: Tony Guadagno Subject: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Hi, I have ldap auth working mostly, if I set tls to false, I can authenticate. However, I want to be secure and when I enable tls, I get a debug error that says: Error binding to LDAP server: servername.local: Can’t contact LDAP server I am guessing the issue is the self signed cert that my server is using. My question is…how do I configure Observium to accept self signed certs for ldap? thanks Tony

2 2