- observium - lists.observium.org

Confusing Poe+ Sensor alerts/warnings
by James Tandy 21 Jun '19

21 Jun '19

Hi, Hardware: HPE J9780A Switch 2530-8-PoEP Did some digging, thanks to the very helpful new? tool https://mibs.observium.org/mib/HP-ICF-POE-MIB/#hpicfPoePethPsePortPower It appears the PoE Power warning is based on being over poe (not poe+) limits, not sure how it determines what the maximum allowed should be. For PoE+ Switches it is 30W The seemingly undocumented OID .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16 gives the following output: .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16.1.1 = 1 .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16.1.2 = 1 .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16.1.3 = 2 .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16.1.4 = 1 .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16.1.5 = -1 .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16.1.6 = 2 .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16.1.7 = 1 .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16.1.8 = -1 Ports 1,2,4 and 7 have PoE devices attached. Ports 3 and 6 have PoE+ devices and ports 4 and 8 are disconnected. This table matches the 'PLC Type' column in the switch GUI. Hopefully this could be useful in making more meaningful PoE Power status warnings/alerts. Also not sure why Current causes an alert.. We have 3 of these switches, some of which show 0.22A as ok, while other ports alert as low as 94mA -- Regards, James Tandy TandyUK Servers Limited Tel: 01903 247 011 Www: http://www.tandyukservers.co.uk Email: support(a)tandyukservers.co.uk TandyUK Servers Limited Registered in England and Wales, Company number 8314911 VAT Registered in the UK, number 182 0661 19 Registered Office: Amelia House, Crescent Road, Worthing, BN11 1QR

3 2

IP SLA Monitoring
by Serghei Golipad 20 Jun '19

20 Jun '19

Hi Team, Do you have similar functionality (Cisco IP SLA) for H3C/HPE (h3c-nqa-mib)? Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

2 3

how to skip SNMP check and only evaluate ICMP for some devices (HPE)?
by Thomas Stather 19 Jun '19

19 Jun '19

Hi Observium version: r9964 (rolling) OS: Ubuntu 16.04 LTS Is there a way to only evaluate the ICMP answers for certain devices (and skip SNMP)? I know that it can be done the other way round (there is a switch in the device props). We run a bunch of H3C/HP/HPE switches and there are no SNMP answers sometimes which lead to false-positives (i know about this issue already). During the next polling run, the alert is then cleared and this is annoying. Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561

2 1

UPS load
by Simon Mousey Smith 19 Jun '19

19 Jun '19

Hi All How simple is it to graph a UPS load in observium? We have bought a new UPS, and observium found all sorts from it straight away However it doesn’t appear to show a LOAD capacity? Its a MegaTec network card and Power Inspired UPS The snmp exists in min already - upsSmartOutputLoad and it only shows a percentage Maybe I can add a graph under the Capacity ? Regards Simon

2 1

Session Timeout
by Peter Derissen 18 Jun '19

18 Jun '19

Hi All, Is there any way to disable the session time-out? We are displaying Observium on several screens in our NMC and it keeps timing out....... Kind Regards, Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening]<http://www.eurofiber.nl/> Volg ons op Twitter<https://twitter.com/Eurofiber> | Linkedin<https://www.linkedin.com/company/eurofiber> | Youtube<https://www.youtube.com/user/Eurofibergroup> ******** IMPORTANT NOTICE ******** This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system. Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof. Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01. Eurofiber N.V. has its registered office at Belgicastraat 5 bus 7, 1930 Zaventem and is registered under national number 0435.204.851.

5 9

power sensor with 0W -> alert
by Wiethoff, Helge 18 Jun '19

18 Jun '19

Hi, since some weeks POE Groups (or other power supply unity) are marked as alarm if no output power is specified: observium-alert-zero-power.png. In this case this is not a problem, it just means that no POE-device is connected to the switch. How can I remove the alarms here? Cheers Helge

2 4

Status Alarms
by Johnathon Voegeli 14 Jun '19

14 Jun '19

Hey guys, Is there a “quick” way to add all status alarms for a device to alert on abnormal values? I assume I’m missing it somewhere, but could not find it in the documentation. Thanks in Advance for my ignorance. ~JV

2 1

Didactum-MIB does not run
by Christian Moh 14 Jun '19

14 Jun '19

Hello, the Didactum-MIBs does not run at the moment. Added support in r9932 (trunk). But i do not found them in the List! Can please look everyone about this? Signatur C.Moh Mit freundlichen Grüßen Christian Moh ______________________________________________________ _*Christian Moh*_ */IT-Services/* /*Max-Planck-Institut für medizinische Forschung* Jahnstraße 29 69120 Heidelberg Telefon: +49 6221 486-640 E-Mail:/ Christian.Moh(a)mpimf-heidelberg.mpg.de

2 1

Distro script error with openvz
by Simon Mousey Smith 14 Jun '19

14 Jun '19

Hi All Is anybody else having an issue with the distro script? It keeps generating an error with openvz containers for myself anyways root@observium:~# distro /usr/local/bin/distro: 359: [: Illegal number: 048522eb-610e-411a-aa48-714ba20a475c Linux|4.15.0|amd64|Ubuntu|18.04||openvz root@observium:~# Regards Simon - Hestor Ltd

3 5

CheckPoint Firewall Sessions
by Joelly, Alexander 12 Jun '19

12 Jun '19

Good Morning, Running Enterprise version 19.5.9872 and also CE 18.9.9420 which was upgraded from the previous one a couple month ago. I could swear the previous CE version had a graph for the firewall sessions of CheckPoint firewall's - but unable to find them now in the Enterprise and CE version... Thanks, Alex

2 1