- observium - lists.observium.org

Down Port Alert Filtering
by Robert Williams 08 Jun '17

08 Jun '17

Hi, I'd like to filter out ports which show in the summary table by removing those which are of the type 'Customer' Currently it looks like this: [cid:image001.png@01D2DF86.29E80950] I would like to ignore Customer type ports (which have a description starting with "Cust:") as it is very common for a number of these to be down at any given time in our use case. So it's not worth of showing up as a Red condition on the main page. Is this something that is currently configurable (like ignoring entire devices, can I also ignore a 'type' of port?) or does something not currently exist for this? Thanks in advance, Robert Williams Custodian Data Centres https://www.CustodianDC.com

3 4

BGP all session : page load >20seconds with 22k sessions
by Johann Mallet 08 Jun '17

08 Jun '17

Hello, I monitored very big network with great tool is Observium. But I have issue with "BGP All session" page : When I navigate on this page, the load time is >20 seconds. I have not the issue with "All ports" page. We have >22k BGP sessions and >1300 Remote ASN. The generation time displayed in bottom righ is between 1 and 2 sec. After some time, I think understand the problem : It's not generation issue, but navigator issue with javascript. The left pan load <0.5sec with first BGP list. But the right pan with search form load >15 seconds. The navigator freeze or greatly slowed down (with "warning : one onglet slowed navigator"). I have test with Firefox and Chrome : same result. I think the big list of "Remote AS" and "Peer address" place JS engine in crazy mode. Do you have option in configuration mode to disable the list of Remote AS/Peer address and only use free text? Or not charge all list and use JS to load list when an letter/number is provided? For the moment, we can't not really use this page :( Thank! Johann

5 10

Scheduled maintenance - use interface circuits
by Christopher Pole 08 Jun '17

08 Jun '17

Is it possible to use port_descr_circuit directly for scheduled maintenance? At the moment I have to create a port group consisting of of the two circuit interfaces using port_descr_circuit to schedule circuit maintenance. This feels a bit clunky due to the extra step and results in dozens of port groups containing two interfaces.

1 0

Failed opening required 'Mail/mimePart.php'
by Simon Mousey Smith 07 Jun '17

07 Jun '17

Hi All Erm help please!? Notifications have been working fine for days then suddenly stopped, and I hate to say it I can’t pin point when i stopped getting them :( I have found those when running alert_test.php the following errors PHP Fatal error: require_once(): Failed opening required 'Mail/mimePart.php' (include_path='/opt/observium/libs:.:/usr/share/php') in /opt/observium/libs/pear/Mail/mime.php on line 63 Fatal error: require_once(): Failed opening required 'Mail/mimePart.php' (include_path='/opt/observium/libs:.:/usr/share/php') in /opt/observium/libs/pear/Mail/mime.php on line 63 Any ideas? I have not changed anything and not even updated the os recently either? Regards Simon

3 2

Email Alerts Broken? Failed opening required 'Mail/mimePart.php'
by Mailing Lists 07 Jun '17

07 Jun '17

Hi All, We just discovered out email alerts have not been sending, and when checking the test_alert.php we see the following error: PHP Fatal error: require_once(): Failed opening required 'Mail/mimePart.php' (include_path='/opt/observium/libs:.:/usr/share/php') in /opt/observium/libs/pear/Mail/mime.php on line 63 Changing line 63 in that file to 'pear/Mail/mimePart.php' fixes the issue and the test alerts works again. Has something changed in a recent Observium release that would have broken this include? Anyone else seeing this? Just upgraded to 17.6.8631 and the issue persists. Many Thanks, Tim C

2 2

Re: [Observium] rrd blank graphs
by Patricio Hernan Besteiro 06 Jun '17

06 Jun '17

just fixed the issue, thanks a lot for your help! Kind regards, Patricio Hernan Besteiro From: observium-request(a)observium.org To: observium(a)observium.org Date: 06/06/2017 08:00 Subject: observium Digest, Vol 83, Issue 6 Sent by: "observium" <observium-bounces(a)observium.org> Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: Unable to Add Device from Web UI (Richard Wigzell) 2. Re: Unable to Add Device from Web UI (Markus Klock) 3. When next CE version? (Silvio del Val Hinojal) 4. Re: When next CE version? (Adam Armstrong) 5. Re: Unable to Add Device from Web UI (Richard Wigzell) 6. Re: Unable to Add Device from Web UI (Mike Stupalov) 7. Re: Unable to Add Device from Web UI (Richard Wigzell) 8. Re: Unable to Add Device from Web UI (Adam Armstrong) 9. Re: Unable to Add Device from Web UI (Richard Wigzell) 10. Re: Unable to Add Device from Web UI (Adam Armstrong) 11. Re: Unable to Add Device from Web UI (Richard Wigzell) 12. rrd blank graphs (Patricio Hernan Besteiro) 13. Re: rrd blank graphs (Adam Armstrong) 14. Re: Unable to Add Device from Web UI (Mike Stupalov) 15. Re: Unable to Add Device from Web UI (Adam Armstrong) 16. Re: Unable to pulled data for Processor, Memory and storage. (Idzma Zakaria) 17. Re: Unable to pulled data for Processor, Memory and storage. (Mike Stupalov) 18. Re: Unable to pulled data for Processor, Memory and storage. (Idzma Zakaria) 19. Re: Unable to pulled data for Processor, Memory and storage. (Adam Armstrong) 20. Re: BGP all session : page load >20seconds with 22k sessions (Johann Mallet) 21. Re: BGP all session : page load >20seconds with 22k sessions (Johann Mallet) 22. Re: BGP all session : page load >20seconds with 22k sessions (Mike Stupalov) 23. Re: Unable to pulled data for Processor, Memory and storage. (Mike Stupalov) ---------------------------------------------------------------------- Message: 1 Date: Mon, 5 Jun 2017 11:41:50 +0000 From: Richard Wigzell <richard.wigzell(a)it.ox.ac.uk> To: Observium <observium(a)observium.org> Subject: Re: [Observium] Unable to Add Device from Web UI Message-ID: <570E8F2DF73D4B4A91278BC443AD5D361DF86DCE(a)MBX05.ad.oak.ox.ac.uk> Content-Type: text/plain; charset="utf-8" Hello, I have updated to 17.6.8616 and have the same results. Here is a screenshot as requested. [cid:image001.png@01D2DDF9.1998B880] Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/> -----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Mike Stupalov Sent: 03 June 2017 14:01 To: Observium <observium(a)observium.org> Subject: Re: [Observium] Unable to Add Device from Web UI Hi, please update to latest rolling (trunk) and check again. Please show add device page screenshot (right after try to add), if you still not able add device from wui. Richard Wigzell wrote: > > Hello, hope someone can help. > > > > We are running 17.5.8587 rolling and we are unable to add a device > using the WebUI, we get ?Could not reach ServerName with given SNMP > parameters using v2c.? > > > > However adding a device from the command line with add_device.php and > the same parameters works fine. Any suggestions welcome. > > > > Regards > > > > > > > > cid:image001.jpg@01CE9215.D39244B0 <https://www.it.ox.ac.uk/> > > > > *Richard Wigzell* > Networks, Security and Server Specialist IT Services | University of > Oxford > > 13 Banbury Road, Oxford OX2 6NN > > > *T:* 01865 616282 > www.it.ox.ac.uk<http://www.it.ox.ac.uk> <https://www.it.ox.ac.uk/> > > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org<mailto:observium@observium.org> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Unable to Add Device from Web UI
by Richard Wigzell 05 Jun '17

05 Jun '17

Hello, hope someone can help. We are running 17.5.8587 rolling and we are unable to add a device using the WebUI, we get "Could not reach ServerName with given SNMP parameters using v2c." However adding a device from the command line with add_device.php and the same parameters works fine. Any suggestions welcome. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

5 12

rrd blank graphs
by Patricio Hernan Besteiro 05 Jun '17

05 Jun '17

Good day for all, I installed observium in red hat 6 and all seems good but graphs are showing no data, rrdtool is working, and and polling script is grabbing data from clients. - rrd directory permissions are 755 , owned by apache - tried to recompile rrdtool - crontab entries are working - recreated db Can you guys help me to troubleshoot? thanks in advance Kind regards, Patricio Hernan Besteiro

2 1

When next CE version?
by Silvio del Val Hinojal 05 Jun '17

05 Jun '17

Hello, When do you think the next Observium CE version will be released ? I know it will be "whenever you think it is ready"...just to know, I would like to test it because we are using current CE version and we would like to see last changes and think about buying it :-) Regards, Silvio [cid:image001.png@01D03B1C.E8E96F80]<http://www.pandasecurity.com/spain/> Silvio del Val Systems Engineer - Panda Security +34 944 343 728 silvio.delval(a)pandasecurity.com<mailto:silvio.delval@pandasecurity.com> pandasecurity.com<http://www.pandasecurity.com/> This e-mail contains confidential information owned by Panda Security. Any such copy, or use, or distribution or disclosure of its contents is strictly forbidden. Please notify us immediately at our phone number (+34 94 425 11 00) if you receive this e-mail and are not its consignee, and then delete this message from your system without copying it, distributing it, or disclosing its contents P Before printing this message, please make sure it is really necessary

2 1

Basic Alerting Question
by TLee 05 Jun '17

05 Jun '17

I apologize for the 'basicness' of this question - i am very new to the community, but can you please confirm that alerting can only be configured in the suscription/ professional edition? Thanks! TL Sent from ProtonMail Mobile

2 1