- observium - lists.observium.org

idrac
by Robert Hatch 24 Nov '14

24 Nov '14

Dear all, Has anyone had any success in using observium with idracs? The auto discover doesn't appear to find any useful sensors other than the physical nic of the idrac itself. Has anyone else worked on support for idracs? All the best rob

5 17

Interface Parsing
by Robert Hatch 24 Nov '14

24 Nov '14

Dear all, Just wondering if there was an appetite out there for expanding the interface labelling feature of observium. The existing description parsing (http://www.observium.org/wiki/Interface_Description_Parsing) is pretty useful but also a bit limiting at times, as it seems more useful when labelling layer 3 services and less so for layer 2. Just a few general comments: * For us the pseudowires tab does not seem to auto populate (we use a variety of juniper, brocade and extreme switches and routers), just wondering if I have missed something here... * This aside there are more frequent occasions where we are providing VPLS services for a client and it would be nice if it were possible to label an interface as both a customer and a P2P link for example and then have these separately broken down in observium itself * There are also occasions where it would extremely useful to label backhaul circuits such as dark fibre and waves. Currently the only option for this is to label things as core but that page becomes so big it is not that useful unless you know what you are after (and then you would just go straight to the interface). Something like BACKHAUL: , PROVIDER:, END (A/B etc.) would be immensely useful and time saving. * The other issue we have that I don't have a simple answer for is the unhelpful aggregation of customer switch ports (quite often both ends of a P2P) and their layer 3 router ports. Could we start by having a separate aggregate graph for each circuit reference for each specific client. Maybe if END A and B are specified then the graph could demonstrate that these are actually different ends of the same link? What do people think? BW rob

3 3

New Community Edition
by Adam Armstrong 24 Nov '14

24 Nov '14

Hi All, We've released a new Observium Community Edition, version 0.14.11, based on SVN revision 6000. There've been over 770 new commits since the previous release. http://www.observium.org/observium-community-0.14.11.tar.gz http://www.observium.org/wiki/Upgrading#Upgrade_to_latest_Major_release http://www.observium.org/wiki/Changelog (will be updated later!) adam.

17 31

Observium Location Naming
by Gary Tang 24 Nov '14

24 Nov '14

Is there some kind of convention as to how to set the sysLocation snmpd parameters? I am currently having some trouble finding the right naming for OVH BHS. So far none of the following work. OVH, Montregie, Quebec OVH, Beauharnois, Quebec OVH, Beauharnois, Montregie OVH, Beauharnois-Salaberry, Montregie -- Gary Tang Sent with Airmail

4 3

Paid support
by Gavin Henry 24 Nov '14

24 Nov '14

Hi all, I can see some of the support options on the main website, but not way to purchase or get in touch? -- Kind Regards, Gavin Henry. http://www.surevoip.co.uk

7 8

Multiple SNMP Queries
by Lane Eckley 23 Nov '14

23 Nov '14

Hi Guys, On a limited number of CentOS & Ubuntu machines we are monitoring with Observium we are seeing dozens of SNMP queries from Observium in a very short window (10-20 seconds). Snip of the logs from /var/logs/messages Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:55776->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] Nov 21 14:43:52 hostname snmpd[22648]: Connection from UDP: [xxx.xxx.xxx.xxx]:37575->[xxx.xxx.xxx.xxx] We are trying to understand why Observium would be sending so many queries back to back as well as why we are seeing this on some machines, but not others. Thanks! -Lane

3 2

hddtemp on CE 0.14.4.5
by deeepdish 23 Nov '14

23 Nov '14

Hello. Great product. Looking forward to evaluating the subscription version after I get a minimum base operational using the CE edition. I have an issue around viewing HDD TEMP graphs driven by data extracted from the UNIX agent and hddtemp script. I can confirm output when auditing output of: telnet (hostname) 36602 or ./poller.php -h (hostname) -d I can also confirm temp. sensor driven graphs do come up for other hosts when using SNMP lmsensors, however not for unix-agent / hddtemp data sources. Can someone point me in the right direction? Thank you.

3 2

Updated changelog!
by Adam Armstrong 22 Nov '14

22 Nov '14

The abridged changelog is now up to date with October and November to date! http://www.observium.org/wiki/Changelog

1 0

unsubscribe
by David Ford [NTLWORLD] 21 Nov '14

21 Nov '14

-- Regards, David Ford Your Old Books & Maps [1] -- Regards, David Ford Your Old Books & Maps [2] Links: ------ [1] http://youroldbooksandmaps.co.uk/?utm_source=TurboSMTP&utm_medium=TurboSMTP… [2] http://youroldbooksandmaps.co.uk/?utm_source=TurboSMTP&utm_medium=TurboSMTP…

2 1

Re: [Observium] hddtemp on CE 0.14.4.5
by deeepdish 21 Nov '14

21 Nov '14

My apologies…. Not using hddtemp script. Using the temperature script (that uses hddtemp).. sn = serial number. Using ZFS on Linux by-vdev definition to map /dev/hd? -> /dev/disk/by-vdev/(sn - serial number) My temperature script below as on monitored host. #!/bin/bash echo "<<<temperature>>>" echo “(sn 1):" `hddtemp /dev/disk/by-vdev/(sn 1) -n` echo “(sn 2):" `hddtemp /dev/disk/by-vdev/(sn 2) -n` echo “(sn 3):" `hddtemp /dev/disk/by-vdev/(sn 3) -n` echo “(sn 4):" `hddtemp /dev/disk/by-vdev/(sn 4) -n` echo “(sn 5):" `hddtemp /dev/disk/by-vdev/(sn 5) -n` ------------------------------ Message: 5 Date: Fri, 21 Nov 2014 10:27:27 -0600 From: "Ron Marosko" <ron(a)rjr-services.com <mailto:ron@rjr-services.com>> To: "'Observium Network Observation System'" <observium(a)observium.org <mailto:observium@observium.org>> Subject: Re: [Observium] hddtemp on CE 0.14.4.5 Message-ID: <001b01d005a8$0aa08140$1fe183c0$(a)rjr-services.com <mailto:001b01d005a8$0aa08140$1fe183c0$@rjr-services.com>> Content-Type: text/plain; charset="us-ascii" Just having a look at the hddtemp agent script. # hddtemp sensor readings # needs hddtemp daemon listening on (at least) localhost # requires netcat to be installed and in the path Have you satisfied those requirements? From: observium [mailto:observium-bounces@observium.org <mailto:observium-bounces@observium.org>] On Behalf Of deeepdish Sent: Friday, November 21, 2014 9:36 AM To: observium(a)observium.org <mailto:observium@observium.org> Subject: [Observium] hddtemp on CE 0.14.4.5 Hello. Great product. Looking forward to evaluating the subscription version after I get a minimum base operational using the CE edition. I have an issue around viewing HDD TEMP graphs driven by data extracted from the UNIX agent and hddtemp script. I can confirm output when auditing output of: telnet (hostname) 36602 or ./poller.php -h (hostname) -d I can also confirm temp. sensor driven graphs do come up for other hosts when using SNMP lmsensors, however not for unix-agent / hddtemp data sources. Can someone point me in the right direction? Thank you.

1 0