- observium - lists.observium.org

Acknowledgments to alerts
by Lars Joergensen 26 Jul '21

26 Jul '21

Hi all We're really pleased with Observium, and are actually looking to using it as the main network monitoring tool. What we miss is a way to add a comment when you acknowledge an alert. Something along the lines of "stuff is acting up again. John is looking at it. Trouble ticket XX1234." Is this something that is being considered? Lars ________________________________ Disclaimer: This e-mail, including any attachments, is for the intended recipient only. If you have received this e-mail by mistake please notify the sender immediately by return e-mail and delete this e-mail and any attachments, without opening the attachments, from your system. Access, disclosure, copying, distribution or reliance on any part of this e-mail by anyone else is prohibited. This e-mail is confidential and may be legally privileged. Chr. Hansen does not represent and/or warrant that the information sent and/or received by or with this e-mail is correct and does not accept any liability for damages related thereto. https://www.chr-hansen.com/en/legal-notice

1 0

Change default sensor thresholds?
by Lars Joergensen 25 Jul '21

25 Jul '21

Hi It seems many of our Aruba SFP's have TX power set about the threshold defined for them somewhere in Observium. Rather than changing all of them manually, I would like to do a global change for these. Is that possible? Lars ________________________________ Disclaimer: This e-mail, including any attachments, is for the intended recipient only. If you have received this e-mail by mistake please notify the sender immediately by return e-mail and delete this e-mail and any attachments, without opening the attachments, from your system. Access, disclosure, copying, distribution or reliance on any part of this e-mail by anyone else is prohibited. This e-mail is confidential and may be legally privileged. Chr. Hansen does not represent and/or warrant that the information sent and/or received by or with this e-mail is correct and does not accept any liability for damages related thereto. https://www.chr-hansen.com/en/legal-notice

1 0

Re: [Observium] observium Digest, Vol 132, Issue 11
by Njoroge, Joyce (Stadt Ulm) 22 Jul '21

22 Jul '21

Hallo, Thanks for your answer. I am very new to Observium and would like to know how to get to the command line of the Observium host. Regards, Joyce -----Ursprüngliche Nachricht----- Von: observium <observium-bounces(a)observium.org> Im Auftrag von observium-request(a)observium.org Gesendet: Donnerstag, 15. Juli 2021 13:00 An: observium(a)observium.org Betreff: observium Digest, Vol 132, Issue 11 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Problem Adding New Device (Njoroge, Joyce (Stadt Ulm)) 2. Re: Problem Adding New Device (Ahmed Rahal) 3. Re: Problem Adding New Device (Adam Armstrong) ---------------------------------------------------------------------- Message: 1 Date: Wed, 14 Jul 2021 14:39:35 +0000 From: "Njoroge, Joyce (Stadt Ulm)" <J.Njoroge(a)ulm.de> To: "observium(a)observium.org" <observium(a)observium.org> Subject: [Observium] Problem Adding New Device Message-ID: <59e016f19ffa485da62f2760e8d554c8(a)sus-ex-01-wp.stadtulm.de> Content-Type: text/plain; charset="utf-8" Hallo, I am having a problem adding a few of my devices to the Observium Server. I use the same parameters for the other devices but with the few that couldn't be added, I am getting the following message. [cid:image001.png@01D778CD.53F2F860] I have tried to change SNMP authentication using different protocol versions but I still get an error message. [cid:image002.png@01D778CE.B3F939D0] [cid:image003.png@01D778CE.D3F95D50] Obsevium version is Observium CE 20.9.10731. I will appreciate your help. Regards, Joyce -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20210714/672568e…> -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.png Type: image/png Size: 23978 bytes Desc: image001.png URL: <http://postman.memetic.org/pipermail/observium/attachments/20210714/672568e…> -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.png Type: image/png Size: 21902 bytes Desc: image002.png URL: <http://postman.memetic.org/pipermail/observium/attachments/20210714/672568e…> -------------- next part -------------- A non-text attachment was scrubbed... Name: image003.png Type: image/png Size: 21113 bytes Desc: image003.png URL: <http://postman.memetic.org/pipermail/observium/attachments/20210714/672568e…> ------------------------------ Message: 2 Date: Wed, 14 Jul 2021 12:05:55 -0400 From: Ahmed Rahal <arahal(a)fibrenoire.ca> To: Observium <observium(a)observium.org> Subject: Re: [Observium] Problem Adding New Device Message-ID: <CAHaNNBULsv0gxYZrN3PPXpLowEdYuWEPUbvcH3aurs_-t0jEMw(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Hi Joyce, Try debugging on the command line from the Observium host: snmpwalk -v2c -c <your_snmpv2_community> 172.30.2.21 This should pull a lot of text. If this command does not succeed, make sure you can reach your target on port 161/udp (check your firewalls). If snmpwalk returns content, try adding the node through the command line: /opt/observium/add_device.php 172.30.2.21 <your_snmpv2_community> That will likely tell you what's wrong. HTH, Ahmed. Le mer. 14 juill. 2021, à 10 h 39, Njoroge, Joyce (Stadt Ulm) via observium <observium(a)observium.org> a écrit : > Hallo, > > > > I am having a problem adding a few of my devices to the Observium Server. > I use the same parameters for the other devices but with the few that > couldn't be added, I am getting the following message. > > > > > > I have tried to change SNMP authentication using different protocol > versions but I still get an error message. > > > > > > > > Obsevium version is Observium CE 20.9.10731. > > > > I will appreciate your help. > > > > Regards, > > Joyce > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > -- Ahmed Rahal Administrateur de Systèmes / Systems Administrator *Fibrenoire* - www.fibrenoire.ca A: 550 , avenue Beaumont, bureau 320, Montréal (Québec) H3N 1V1 arahal(a)fibrenoire.ca Twitter: @fibrenoire -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20210714/4a81156…> -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.png Type: image/png Size: 23978 bytes Desc: not available URL: <http://postman.memetic.org/pipermail/observium/attachments/20210714/4a81156…> -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.png Type: image/png Size: 21902 bytes Desc: not available URL: <http://postman.memetic.org/pipermail/observium/attachments/20210714/4a81156…> -------------- next part -------------- A non-text attachment was scrubbed... Name: image003.png Type: image/png Size: 21113 bytes Desc: not available URL: <http://postman.memetic.org/pipermail/observium/attachments/20210714/4a81156…> ------------------------------ Message: 3 Date: Wed, 14 Jul 2021 17:08:35 +0100 From: Adam Armstrong <adama(a)observium.org> To: Observium <observium(a)observium.org> Subject: Re: [Observium] Problem Adding New Device Message-ID: <6B77A19F-AB64-4F85-9821-E366D51E2AB5(a)getmailspring.com> Content-Type: text/plain; charset="utf-8" Better to just fetch sysObjectID.0 or sysDescr.0 instead of a walk to start with. snmpget -v2c -c <community> 172.30.2.21 sysDescr.0 Using v3 auth on commandline is messy, I'd recommend making it work with v2c if you don't understand the complexities. adam. On Jul 14 2021, at 5:05 pm, Ahmed Rahal via observium <observium(a)observium.org> wrote: > Hi Joyce, > > Try debugging on the command line from the Observium host: > snmpwalk -v2c -c <your_snmpv2_community> 172.30.2.21 > > This should pull a lot of text. > If this command does not succeed, make sure you can reach your target on port 161/udp (check your firewalls). > > > If snmpwalk returns content, try adding the node through the command line: > /opt/observium/add_device.php 172.30.2.21 <your_snmpv2_community> > > > That will likely tell you what's wrong. > > HTH, > > Ahmed. > Le mer. 14 juill. 2021, à 10 h 39, Njoroge, Joyce (Stadt Ulm) via observium <observium(a)observium.org (mailto:observium@observium.org)> a écrit : > > Hallo, > > > > > > I am having a problem adding a few of my devices to the Observium Server. I use the same parameters for the other devices but with the few that couldn't be added, I am getting the following message. > > > > > > > > > > I have tried to change SNMP authentication using different protocol versions but I still get an error message. > > > > > > > > > > > > > > > > Obsevium version is Observium CE 20.9.10731. > > > > I will appreciate your help. > > > > Regards, > > Joyce > > _______________________________________________ > > observium mailing list > > observium(a)observium.org (mailto:observium@observium.org) > > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > > -- > Ahmed Rahal > > Administrateur de Systèmes / Systems Administrator > > Fibrenoire - www.fibrenoire.ca (http://www.fibrenoire.ca/) > A: 550 > , avenue > Beaumont, > bureau > 320, > Montréal (Québec) > H3N 1V1 > > arahal(a)fibrenoire.ca (mailto:arahal@fibrenoire.ca) > Twitter: @fibrenoire > > > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20210714/8665e09…> ------------------------------ Subject: Digest Footer _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ------------------------------ End of observium Digest, Vol 132, Issue 11 ******************************************

2 1

Unable to poll a once working Device
by Oberreiter Andreas 20 Jul '21

20 Jul '21

Hi there, I have multiple environmental Devices which are working fine for years now. A view weeks ago one of was shown as unable to poll. A SNMPwalk for the Device works fine. I've tried to add the device via it's IP no luck there. I've rebooted the Server and the Device multiple times. I flushed the DNS cache. Attached are the debug Output of a poller run of a working Device poll_tempboxnl.txt and of the non-working Device poll_tempboxnz.txt as well as the discovery and snmpwalk output. xxx_tempboxnl.txt working. xxx_tempboxnz.txt not working. Any suggestions are welcome. Best regards Andras

2 2

Problem Adding New Device
by Njoroge, Joyce (Stadt Ulm) 14 Jul '21

14 Jul '21

Hallo, I am having a problem adding a few of my devices to the Observium Server. I use the same parameters for the other devices but with the few that couldn't be added, I am getting the following message. [cid:image001.png@01D778CD.53F2F860] I have tried to change SNMP authentication using different protocol versions but I still get an error message. [cid:image002.png@01D778CE.B3F939D0] [cid:image003.png@01D778CE.D3F95D50] Obsevium version is Observium CE 20.9.10731. I will appreciate your help. Regards, Joyce

3 2

Re: [Observium] Invalid targets and datasource
by Mati 12 Jul '21

12 Jul '21

Dear All, I have been struggling getting PHP Weathermap working properly on Observium and would really appreciate your help.. I've noticed that the percentage values on the links is not working and the traffic load is continuously at 0.00%. We are currently using the following software versions.. *Observium* 21.5.11304 (6th May 2021) *OS* Linux 3.16.0-4-amd64 [amd64] (Debian 8) *Apache* 2.4.10 (Debian) *PHP* 5.6.38-0+deb8u1 (OPcache: ENABLED) (Memory: 128MB) *Python* 2.7.9 *MySQL* 5.5.60-0+deb8u1 (extension: mysqli 5.5.60) *SNMP* NET-SNMP 5.7.2.1 *RRDtool* 1.4.8 The results from map-poller.php are as follows: WARNING: configs//example.conf: OVERLIBGRAPH is used, but HTMLSTYLE is static. This is probably wrong. [WMWARN41] PHP Notice: Undefined index: uptime in /var/opt/observium/html/weathermap/lib/datasources/WeatherMapDataSource_observium.php on line 53 PHP Notice: Undefined index: uptime in /var/opt/observium/html/weathermap/lib/datasources/WeatherMapDataSource_observium.php on line 53 WARNING: configs//Core_062021.conf: ProcessTargets: LINK hex.asr9k-pe1, target: /opt/observium/rrd/hex.asr9k-pe1/port-415.rrd:INOCTETS:OUTOCTETS on config line 69 of configs//Core_062021.conf was not recognised as a valid TARGET [WMWARN08] Kind Regards MP

2 4

Unable to create Alert Checker
by David Milton 12 Jul '21

12 Jul '21

Hello, I'm having a strange problem creating alert checkers. I first noticed this today and updated to the latest edition: 21.7.11450. I'm working on a test server and was attempting to re-create all of the alert checkers currently on my production systems and then add a few more; I would like to monitor power supply input state as well as air intake temperatures and produce alerts when a power supply is "down" and when intake air temperatures go above something like 45C. This has been prompted by some problems lately where power redundancy was lost and where we had an air conditioner failure. An earlier warning than having the hardware go into thermal shutdown is very much needed. So on my test server I can go through the basic process of creating the alert checker; alert checks -> Create new checker. In this case I click BGP Peer, fill in the name, message, use 1 for the delay and the conditions: bgpPeerAdminStatus notequals stop bgpPeerState notequals established Unfortunately, when I click "Add Checker" nothing happens. I've verified this is not likely the browser or is something pretty universal to all of my browsers because I can duplicate this in current versions Firefox, Safari, Opera, and Chrome. Both Opera and Chrome are fresh installations done today but I did try disabling all extensions in Firefox and Safari to see if those were a problem. I searched through the documentation but couldn't find anything about browser compatibility or known conflicts. This used to work but it's been quite some time since I've wanted to add new checks. Is there something else I'm missing? Thanks, Dave.

2 4

Thermal Alarm Bug
by Joey Stanford 12 Jul '21

12 Jul '21

Hi Adam (et al), When Obs pulls in a sensor_value of NULL it gets interpreted as a zero and thus triggers alerts. Can we prevent that somehow? Joey > Begin forwarded message: > > From: "Observium" <observium(a)rmham.org> > Subject: ALERT: [radio-westcreek.devilshead.rmham] [sensor] [System] Thermal Alarm - Temperature out of threshold > Date: July 9, 2021 at 14:43:53 MDT > To: netops(a)rmham.org > > ALERT Modify <http://observium.rmham.org/device/device=182/tab=alert/alert_entry=23319/> > Alert Thermal Alarm - Temperature out of threshold > Entity System <http://observium.rmham.org/device/device=182/tab=health/metric=temperature/…> > Conditions sensor_value less -25 ("") > Metrics sensor_value = > Duration 5h 43s (2021-07-09 09:43:10) > Device > Device radio-westcreek.devilshead.rmham <http://observium.rmham.org/device/device=182/> > Hardware RB911-5HacD > Operating System Mikrotik RouterOS 6.47.10 (Level 3) > Location DevilsHead, [39.260394,-105.101844] > Uptime 7m 28s > sensor_graph > > <http://observium.rmham.org/graph.php?type=sensor_graph&id=3629> > > E-mail sent to: netops(a)rmham.org <mailto:netops@rmham.org> > E-mail sent at: Fri, 09 Jul 2021 14:43:53 -0600 > > -- > Observium Professional 21.7.11470 <https://www.observium.org/>

3 6

APCu Caching not working?
by Milton Ngan 08 Jul '21

08 Jul '21

I have noticed that when I enable webUI caching, that the page loads don’t speed up. It regularly takes 3 seconds to render a page, although the tool tip at the bottom shows APCu caching is enabled. However, if I force the cache driver to “files”, then I see a huge speed up (page loads drop to about 100-200ms). Is there some extra config to get APCu working correctly? I didn’t see anything in the docs, but I could have missed it.

5 7

(no subject)
by DerBeWie 08 Jul '21

08 Jul '21

3 4