- observium - lists.observium.org

Re: [Observium] Alert on port utilisation percent ?
by Tony Guadagno 08 Sep '20

08 Sep '20

Milton, I disagree, for example, how do you set up a rule to apply to all devices (past and future)? It appears you cannot, however, you could in the past and that are what all the examples show. I like observium quite a lot, however, its these things (like documentation that is not current) that can really frustrate a user. Tony From: Milton Ngan<mailto:milton@valvesoftware.com> Sent: Monday, September 7, 2020 5:05 PM To: Tony Guadagno<mailto:tonyg@guadagno.org>; Observium<mailto:observium@observium.org> Cc: Pieter De Wit<mailto:pieter@insync.za.net> Subject: Re: [Observium] Alert on port utilisation percent ? The only thing that has really change is the association rule set. Instead of it being a text entry like the test conditions, there is now an expression builder, but the fields and operators are still the same. That should be easier that before. The test/check condition documentation is still relevant. That hasn't changed. From: Tony Guadagno <tonyg(a)guadagno.org> Sent: Monday, September 7, 2020 1:59:04 PM To: Milton Ngan; Observium Cc: Pieter De Wit Subject: RE: [Observium] Alert on port utilisation percent ? This is what modern version looks like, unfortunately, there are no docs for this. [cid:image007.png@01D685B3.55A2C860] Tony From: Milton Ngan<mailto:milton@valvesoftware.com> Sent: Monday, September 7, 2020 4:49 PM To: Tony Guadagno<mailto:tonyg@guadagno.org>; Observium<mailto:observium@observium.org> Cc: Pieter De Wit<mailto:pieter@insync.za.net> Subject: Re: [Observium] Alert on port utilisation percent ? I can't really say what "modern" Observium looks like, I haven't updated our SVN pull for a while. But the version we are running has Test Conditions and the syntax for those looks like what is on the examples page, so I assumed that this should still be relevant. Hopefully Pieter can figure it out from there. From: Tony Guadagno <tonyg(a)guadagno.org> Sent: Monday, September 7, 2020 1:43:35 PM To: Observium; Milton Ngan Cc: Pieter De Wit; Observium Subject: RE: [Observium] Alert on port utilisation percent ? There is a problem with these examples, they don’t work for modern Observium. Now that observium uses test conditions and “association rulesets”, the documentation is broke and you cannot implement these examples the way they are shown. It would be REALLY helpful to have updated documentation. I am stull struggling with checkers because it is all trial and error. Tony From: Pieter De Wit via observium<mailto:observium@observium.org> Sent: Monday, September 7, 2020 4:18 PM To: Milton Ngan<mailto:milton@valvesoftware.com> Cc: Pieter De Wit<mailto:pieter@insync.za.net>; Observium<mailto:observium@observium.org> Subject: Re: [Observium] Alert on port utilisation percent ? How did I miss that….Thanks ! On 8/09/2020, at 07:58, Milton Ngan <milton(a)valvesoftware.com<mailto:milton@valvesoftware.com>> wrote: Use ifInOctets_perc, an example of this is in the docs. https://docs.observium.org/alerting_examples/ Example Alert Checkers - Observium<https://docs.observium.org/alerting_examples/> docs.observium.org<http://docs.observium.org/> Observium Documentation From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Pieter De Wit via observium <observium(a)observium.org<mailto:observium@observium.org>> Sent: Monday, September 7, 2020 12:46:46 PM To: Observium Cc: Pieter De Wit Subject: [Observium] Alert on port utilisation percent ? Hi All, Is there a way to alert on port usage percentage ? If so, what is the metric called ? We are *currently* on CE. Thanks, Pieter _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

Re: [Observium] Alert on port utilisation percent ?
by Tony Guadagno 07 Sep '20

07 Sep '20

There is a problem with these examples, they don’t work for modern Observium. Now that observium uses test conditions and “association rulesets”, the documentation is broke and you cannot implement these examples the way they are shown. It would be REALLY helpful to have updated documentation. I am stull struggling with checkers because it is all trial and error. Tony From: Pieter De Wit via observium<mailto:observium@observium.org> Sent: Monday, September 7, 2020 4:18 PM To: Milton Ngan<mailto:milton@valvesoftware.com> Cc: Pieter De Wit<mailto:pieter@insync.za.net>; Observium<mailto:observium@observium.org> Subject: Re: [Observium] Alert on port utilisation percent ? How did I miss that….Thanks ! On 8/09/2020, at 07:58, Milton Ngan <milton(a)valvesoftware.com<mailto:milton@valvesoftware.com>> wrote: Use ifInOctets_perc, an example of this is in the docs. https://docs.observium.org/alerting_examples/ Example Alert Checkers - Observium<https://docs.observium.org/alerting_examples/> docs.observium.org<http://docs.observium.org/> Observium Documentation From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Pieter De Wit via observium <observium(a)observium.org<mailto:observium@observium.org>> Sent: Monday, September 7, 2020 12:46:46 PM To: Observium Cc: Pieter De Wit Subject: [Observium] Alert on port utilisation percent ? Hi All, Is there a way to alert on port usage percentage ? If so, what is the metric called ? We are *currently* on CE. Thanks, Pieter _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 3

Seperate Juniper Flow Sessions from Max
by Pieter De Wit 07 Sep '20

07 Sep '20

Hi, We have a Juniper firewall and its Max Flow Sessions is a *lot* higher than what is currently used. Is there a way to seperate these values onto 2 graphs (without using custom OIDs) ? Thanks, Pieter

1 0

IPSEC Tunnel graphs - Def Error
by Dale Chambers 07 Sep '20

07 Sep '20

Hi, I we predominantly have Cisco devices which is monitored via Observium. I have noticed that there is an issue showing graphs of IPSEC Tunnels. I am not sure when this started to fail but I am on version 20.8.10644. I have checked amongst several different devices and they all show the same error. This is tested on ASA5506, ASA5525, Cisco 1921, Cisco 2911 and Cisco 4331. All graphs shows 'Def Error' [cid:image007.png@01D6829C.C6E0D220] How do I resolved this issue? I have already tried running the discovery.php -h all, and I have even upgraded to 20.9.10652 and still having the same issue. Many Thanks Dale CONFIDENTIALITY AND PRIVACY POLICY This communication is private and the information contained in this email and any attachments may be privileged, commercially sensitive, confidential, proprietary to NSSLGlobal Limited or otherwise legally exempt from disclosure. If you are not the intended recipient or have been sent this in error, you are prohibited from using, copying, relying upon, or disseminating the information, and the sender disclaims any liability for such unauthorised use. Further, if you are not the intended recipient, please notify the sender immediately and delete all copies of this message. In accordance with our email policy, emails sent or received may be monitored. Thank you. We have recently updated our Privacy Policy, which can be accessed at https://www.nsslglobal.com/uploads/documents/NSSLGlobal_Privacy_Policy.pdf We will hold and manage personal data that you provide us with in accordance with this Privacy Policy.

2 3

Enabling MIB and custom values support
by Marian Rychtecky 07 Sep '20

07 Sep '20

Hi all, I do have two questions with different topics, but I didn't want to send multiple emails. Hope you don't mind. First question is probably very simple, however I cannot find out - I need to collect information from Cisco devices using " CISCO-NETWORK-VIRTUALIZATION-OVERLAY-MIB". This MIB is part of Observium. How I will "activate" collecting these MIB values from a device please? I do have almost all modules active and I don't know how to add MIB to a certain device (not all devices, just 3 of them). Second question - as more and more devices (such as Arista) are giving up on SNMP turning slowly to REST APIs or similar methods, is there any way to push information to Observium using its own (python/php) script? I would imagine any kind of value mapping to graphs and then collecting values from scripts or JSON file.... Thank you for your time and support. Marian -- Marian Rychtecký mr(a)nix.cz Phone +420 724 397 441 NIX.CZ z.s.p.o. Americká 23, Praha 2 130 52 Czech Republic http://www.nix.cz

2 1

Connect to device icon?
by Chris Macneill 05 Sep '20

05 Sep '20

Hi, I was sure at one point there was a "Connect to device/terminal" icon in Observium, but either I'm mistaken and it was never there or now so buried I can no longer find it. Whilst hostnames and/or IP addresses are shown in Observium, they generally have active links attached to them to take you to other screens in Observium, this makes it hard to copy these into a Browser to gain access to the device's GUI. It would be nice to have a "Connect to device" icon next to the IP/Hostname that will make it much easier to click through to the device's own GUI. We recently started using Ubiquiti's UNMS monitoring system which is good for Ubiquiti devices, but pretty lousy for anything else. UNMS has a "Copy to clipboard" icon next to each IP address making it really easy to then connect to the device's GUI. I like the "Copy to clipboard" method rather than a URL link, as this is generic and you can then copy and paste into a browser or any other application. Regards Chris Macneill

4 7

Request for adding support for VELOCLOUD MIBS
by Sujith S 05 Sep '20

05 Sep '20

Hello Team, Kindly add the Support for VELOCLOUD MIBS. Please let me know what information is needed for this Support to be added. -- Regards Sujith

3 8

Again Reset GEO location
by Jacek.Dabrowski＠selgros.pl 04 Sep '20

04 Sep '20

Hello, Is it possible to reset the GEO location via cli ??? I have such a case, GEO displays 2dev, it's actually 30, the address is the same (same location), geo reset helps but for 30 devices it's tiring. [cid:image001.png@01D6829D.8F80D630] Regards Jacek Dąbrowski

1 0

BGP Session Monitoring on ASR9900
by Serghei Golipad 03 Sep '20

03 Sep '20

Hi All, Is anyone monitoring VPNV4/VRF BGP sessions? I can see Observium is successfully discovering peers but not showing state for some reason. Is anyone having same issues? I'm on 7.0.2 of IOS-XR code. Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 1 New Change, London, EC4M 9AF. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

4 10

Difference in polling between community and professionnal edition ?
by mosdvas 02 Sep '20

02 Sep '20

Hello, I've been using Observium for a few months in my company and I'm thinking about upgrading to the professional version. Does this version add more powerful mibs on hardware or add some fonctionnality on WMI polling ? Like for example : - BGP & Peering session on Mikrotiks (CCRXXX) - spooler tracking on Zebra printers - Windows's wmi poller able to list services and their states Best Regards,

1 0