- observium - lists.observium.org

Graph limited to 100G
by Raphael Maunier 11 Nov '13

11 Nov '13

Hello, I have one Juniper MX480 with 40 * 10G ports. The router push more than 150G and more than 100G on one IRB interface. Observium see the traffic on the IRB interface here : http://imageshack.com/i/mah92bp But is unable to graph the port here : http://imageshack.com/i/1364rap http://imageshack.com/i/nmkft3p I’m running CE 0.13.10.4585 Is there any The rrd graph was created with a lower value for the bandwidth ( updated to 200G after ) . Do I have to re-generate the rrd file ( export from the old rrd and import data to the new one ? Here the rrdtool command to update the rrd rrdtool graph /tmp/IilQ0vGmiWc161PX.png --alt-autoscale-max --rigid -E --start 1384116473 --end 1384202873 --width 1159 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DejaVuSansMono' --font AXIS:7:'DejaVuSansMono' --font-render-mode normal COMMENT:'Bits/s Now Avg Max 95th \n' DEF:outoctets=/opt/observium/rrd/router.test.com/port-575.rrd:OUTOCTETS:AVE… DEF:inoctets=/opt/observium/rrd/router.test.com/port-575.rrd:INOCTETS:AVERA… DEF:outoctets_max=/opt/observium/rrd/router.test.com/port-575.rrd:OUTOCTETS… DEF:inoctets_max=/opt/observium/rrd/router.test.com/port-575.rrd:INOCTETS:M… CDEF:octets=inoctets,outoctets,+ CDEF:doutoctets=outoctets,-1,* CDEF:outbits=outoctets,8,* CDEF:outbits_max=outoctets_max,8,* CDEF:doutoctets_max=outoctets_max,-1,* CDEF:doutbits=doutoctets,8,* CDEF:doutbits_max=doutoctets_max,8,* CDEF:inbits=inoctets,8,* CDEF:inbits_max=inoctets_max,8,* VDEF:totin=inoctets,TOTAL VDEF:totout=outoctets,TOTAL VDEF:tot=octets,TOTAL VDEF:95thin=inbits,95,PERCENT VDEF:95thout=outbits,95,PERCENT VDEF:d95thout=doutbits,5,PERCENT AREA:inbits#92B73F LINE1.25:inbits#4A8328:'In ' GPRINT:inbits:LAST:%6.2lf%s GPRINT:inbits:AVERAGE:%6.2lf%s GPRINT:inbits_max:MAX:%6.2lf%s GPRINT:95thin:%6.2lf%s\\n AREA:doutbits#7075B8 LINE1.25:doutbits#323B7C:'Out' GPRINT:outbits:LAST:%6.2lf%s GPRINT:outbits:AVERAGE:%6.2lf%s GPRINT:outbits_max:MAX:%6.2lf%s GPRINT:95thout:%6.2lf%s\\n GPRINT:tot:'Total %6.2lf%s' GPRINT:totin:'(In %6.2lf%s' GPRINT:totout:'Out %6.2lf%s)\\l' LINE1:95thin#aa0000 LINE1:d95thout#aa0000 regards, Raphael

1 0

Re: [Observium] Problems populating graphs
by Adam Armstrong 08 Nov '13

08 Nov '13

Where in the install guide did it tell you to do that? What else did you modify? Ross Ashley <rashley(a)katto.com> wrote: >I set the poller to run from the root crontab. > >Here is the crontab -l > >33 */6 * * * /opt/observium/discovery.php -h all >> /dev/null 2>&1 >*/5 * * * * /opt/observium/discovery.php -h new >> /dev/null 2>&1 >*/5 * * * * /opt/observium/poller-wrapper.php 2 >> /dev/nul > >On 11/08/2013 02:13 PM, Adam Armstrong wrote: >> And what user does the poller run as from cron? >> >> Ross Ashley <rashley(a)katto.com> wrote: >> >>> No. The device data, like OS type and version looks fine but all of the >>> graphs are empty. I ran the poller as root so all the rrds are updated >>> that one time. >>> >>> On 11/08/2013 02:00 PM, Adam Armstrong wrote: >>>> Is it populating any other data? >>>> >>>> The fact that the RRDs are being created means that the poller is >>>> running, at least once. >>>> >>>> adam. >>>> >>>> >>>> On 2013-11-08 18:57, Ross Ashley wrote: >>>>> Yes, I thought of that :-) But I'm getting the same behavior on >>>>> localhost, which led me to believe that I'd screwed something up. >>>>> Permissions seem OK. >>>>> >>>>> On 11/08/2013 01:52 PM, Adam Armstrong wrote: >>>>> You might want to try a less functionally retarded device, to make sure >>>>> everything works, first. >>>>> >>>>> adam. >>>>> >>>>> >>>>> On 2013-11-08 18:51, Ross Ashley wrote: >>>>> I'm trying to setup an airport extreme. I think I've successfully set >>>>> it up both from the command line with add_device.php and from the web >>>>> page, (I deleted it and then added it). The static info for it >>>>> appears but any graphic info doesn't. All the graphs are empty, >>>>> showing Nan >>>>> >>>>> rrdtool dump yields Nan for all data other than static info. Here is a >>>>> portion of what I mean; >>>>> >>>>> <?xml version="1.0" encoding="utf-8"?> >>>>> <!DOCTYPE rrd SYSTEM "http://oss.oetiker.ch/rrdtool/rrdtool.dtd"> >>>>>  >>>>> <rrd> >>>>> <version>0003</version> >>>>> <step>300</step>  >>>>> <lastupdate>1383934188</lastupdate>  >>>>> >>>>> <ds> >>>>> <name> icmpInMsgs </name> >>>>> <type> COUNTER </type> >>>>> <minimal_heartbeat>600</minimal_heartbeat> >>>>> <min>NaN</min> >>>>> <max>1.0000000000e+11</max> >>>>> >>>>>  >>>>> <last_ds>69</last_ds> >>>>> <value>0.0000000000e+00</value> >>>>> <unknown_sec> 288 </unknown_sec> >>>>> </ds> >>>>> >>>>> <ds> >>>>> <name> icmpOutMsgs </name> >>>>> <type> COUNTER </type> >>>>> <minimal_heartbeat>600</minimal_heartbeat> >>>>> <min>NaN</min> >>>>> <max>1.0000000000e+11</max> >>>>> >>>>>  >>>>> <last_ds>31</last_ds> >>>>> <value>0.0000000000e+00</value> >>>>> <unknown_sec> 288 </unknown_sec> >>>>> </ds> >>>>> >>>>> ... >>>>> >>>>> I followed the installation instructions twice :-) but I can't seem to >>>>> get any data to appear. >>>>> >>>>> Can someone give me an idea of something to check? >>>>> >>>>> Thanks. >>>>> >>>>> Ross >>>>> _______________________________________________ >>>>> observium mailing list >>>>> observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>> _______________________________________________ >>>>> observium mailing list >>>>> observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>> >>>>> _______________________________________________ >>>>> observium mailing list >>>>> observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 5

Re: [Observium] Problems populating graphs
by Adam Armstrong 08 Nov '13

08 Nov '13

And what user does the poller run as from cron? Ross Ashley <rashley(a)katto.com> wrote: >No. The device data, like OS type and version looks fine but all of the >graphs are empty. I ran the poller as root so all the rrds are updated >that one time. > >On 11/08/2013 02:00 PM, Adam Armstrong wrote: >> Is it populating any other data? >> >> The fact that the RRDs are being created means that the poller is >> running, at least once. >> >> adam. >> >> >> On 2013-11-08 18:57, Ross Ashley wrote: >>> Yes, I thought of that :-) But I'm getting the same behavior on >>> localhost, which led me to believe that I'd screwed something up. >>> Permissions seem OK. >>> >>> On 11/08/2013 01:52 PM, Adam Armstrong wrote: >>> You might want to try a less functionally retarded device, to make sure >>> everything works, first. >>> >>> adam. >>> >>> >>> On 2013-11-08 18:51, Ross Ashley wrote: >>> I'm trying to setup an airport extreme. I think I've successfully set >>> it up both from the command line with add_device.php and from the web >>> page, (I deleted it and then added it). The static info for it >>> appears but any graphic info doesn't. All the graphs are empty, >>> showing Nan >>> >>> rrdtool dump yields Nan for all data other than static info. Here is a >>> portion of what I mean; >>> >>> <?xml version="1.0" encoding="utf-8"?> >>> <!DOCTYPE rrd SYSTEM "http://oss.oetiker.ch/rrdtool/rrdtool.dtd"> >>>  >>> <rrd> >>> <version>0003</version> >>> <step>300</step>  >>> <lastupdate>1383934188</lastupdate>  >>> >>> <ds> >>> <name> icmpInMsgs </name> >>> <type> COUNTER </type> >>> <minimal_heartbeat>600</minimal_heartbeat> >>> <min>NaN</min> >>> <max>1.0000000000e+11</max> >>> >>>  >>> <last_ds>69</last_ds> >>> <value>0.0000000000e+00</value> >>> <unknown_sec> 288 </unknown_sec> >>> </ds> >>> >>> <ds> >>> <name> icmpOutMsgs </name> >>> <type> COUNTER </type> >>> <minimal_heartbeat>600</minimal_heartbeat> >>> <min>NaN</min> >>> <max>1.0000000000e+11</max> >>> >>>  >>> <last_ds>31</last_ds> >>> <value>0.0000000000e+00</value> >>> <unknown_sec> 288 </unknown_sec> >>> </ds> >>> >>> ... >>> >>> I followed the installation instructions twice :-) but I can't seem to >>> get any data to appear. >>> >>> Can someone give me an idea of something to check? >>> >>> Thanks. >>> >>> Ross >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Problems populating graphs
by Ross Ashley 08 Nov '13

08 Nov '13

I'm trying to setup an airport extreme. I think I've successfully set it up both from the command line with add_device.php and from the web page, (I deleted it and then added it). The static info for it appears but any graphic info doesn't. All the graphs are empty, showing Nan rrdtool dump yields Nan for all data other than static info. Here is a portion of what I mean; <?xml version="1.0" encoding="utf-8"?> <!DOCTYPE rrd SYSTEM "http://oss.oetiker.ch/rrdtool/rrdtool.dtd">  <rrd> <version>0003</version> <step>300</step>  <lastupdate>1383934188</lastupdate>  <ds> <name> icmpInMsgs </name> <type> COUNTER </type> <minimal_heartbeat>600</minimal_heartbeat> <min>NaN</min> <max>1.0000000000e+11</max>  <last_ds>69</last_ds> <value>0.0000000000e+00</value> <unknown_sec> 288 </unknown_sec> </ds> <ds> <name> icmpOutMsgs </name> <type> COUNTER </type> <minimal_heartbeat>600</minimal_heartbeat> <min>NaN</min> <max>1.0000000000e+11</max>  <last_ds>31</last_ds> <value>0.0000000000e+00</value> <unknown_sec> 288 </unknown_sec> </ds> ... I followed the installation instructions twice :-) but I can't seem to get any data to appear. Can someone give me an idea of something to check? Thanks. Ross

2 4

Re: [Observium] Upgrading version to latest
by cbermudez＠tothus.net 07 Nov '13

07 Nov '13

Thank you for you reply xavier. There is manually way to upgrade or I need reinstall onservium and lost all my configuration? Thank you very much Cristian ------Original Message------ From: Xavier Beaudouin To: cbermudez(a)tothus.net Subject: Re: [Observium] Upgrading version to latest Sent: Nov 7, 2013 12:36 PM Hi, > Hi list, I'm using the 0.13.10.4585 version and I'd like upgrade to latest. > I'm not have svn because I don't have a subscription. How can I do? There is 2 ways... First subscribe (pay)... Another use one of the forks. Xavier Enviado desde mi BlackBerry de Movistar (http://www.movistar.com.ar)

4 3

Fw: Upgrading version to latest
by cbermudez＠tothus.net 07 Nov '13

07 Nov '13

Hi list! Could you help me with my question please? Thank you !!! For you effort Cristian ------Original Message------ From: cbermudez(a)tothus.net To: cbermudez(a)tothus.net To: Observium Network Observation System ReplyTo: cbermudez(a)tothus.net Subject: Re: [Observium] Upgrading version to latest Sent: Nov 7, 2013 11:56 AM Hi list! Could you help me with my question please? Thank you !!! For you effort Cristian ------Original Message------ From: cbermudez(a)tothus.net Sender: observium To: observium(a)observium.org ReplyTo: cbermudez(a)tothus.net ReplyTo: Observium Network Observation System Subject: [Observium] Upgrading version to latest Sent: Nov 7, 2013 12:52 AM Hi list, I'm using the 0.13.10.4585 version and I'd like upgrade to latest. I'm not have svn because I don't have a subscription. How can I do? Regards Enviado desde mi BlackBerry de Movistar (http://www.movistar.com.ar) _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium Enviado desde mi BlackBerry de Movistar (http://www.movistar.com.ar) Enviado desde mi BlackBerry de Movistar (http://www.movistar.com.ar)

2 1

Re: [Observium] Upgrading version to latest
by cbermudez＠tothus.net 07 Nov '13

07 Nov '13

Hi list! Could you help me with my question please? Thank you !!! For you effort Cristian ------Original Message------ From: cbermudez(a)tothus.net Sender: observium To: observium(a)observium.org ReplyTo: cbermudez(a)tothus.net ReplyTo: Observium Network Observation System Subject: [Observium] Upgrading version to latest Sent: Nov 7, 2013 12:52 AM Hi list, I'm using the 0.13.10.4585 version and I'd like upgrade to latest. I'm not have svn because I don't have a subscription. How can I do? Regards Enviado desde mi BlackBerry de Movistar (http://www.movistar.com.ar) _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium Enviado desde mi BlackBerry de Movistar (http://www.movistar.com.ar)

1 0

+1 re: bsd
by Rob VanHooren 07 Nov '13

07 Nov '13

+1 (++good) for a maintained BSD port. but draw the line at slowaris or other nasty *nix. there’s a reason AIX is a homonym of “aches”. alternatively, go the IncrediblePBX route, call it “embedded” and pack it into a VM. ideally, both … if embedded BSD is good enough for StatSeeker, pfSense, or FreeNAS; it’s good enough for us! LOL. by some unfathomable logic, packing up something into an OVF container (along with replacing bash with busybox, and tossing phone-home/updates into a cron job) is an acceptable way to avoid the political agony of introducing Obs into some brain-dead enterprise ‘doze-only shops that forbid OpenSores. ps adam — suggest any future “enterprise" license (if any) should be $8,500/year for those types (under $10k tax-in, so you stay at the discretion boundary of 1st-level budget approvers). Plus another 30% for next-business-day email “support” maintenance. Otherwise, they’ll think you’re just kidding. (keep it the Exact Same Thing as the svn version, but it just costs more … because somehow, that makes it legitimate! ) $0.02 R. On Nov 7, 2013, at 1:38, observium-request(a)observium.org wrote: > Regarding FreeBSD, yes, but you know, it's just another BSD "unix", and > very server oriented

3 2

Re: [Observium] list
by Rob VanHooren 07 Nov '13

07 Nov '13

phpBB would be a better UI, and more searchable. (imo) On Nov 7, 2013, at 7:00, observium-request(a)observium.org wrote: > the way it is now is > just fine. > > Tom

2 1

Fwd: Observium bug
by Ata Redeemer 07 Nov '13

07 Nov '13

Hi, I am a technical trainer for users who would want to run observium as their preferred network monitoring tool. To I tried setting observium and this is what the display looks like. I will like to know if this is a bug. I am installing the open source version though. Regards Ata Redeemer -aka ata-linux

2 1