- observium - lists.observium.org

Observium Enterprise
by Joelly, Alexander 24 Jan '19

24 Jan '19

Hello, Our company is split into two major regions (EU & NA) where we have a central datacenter in each region, all sites in the particular region is connected to it's regional datacenter and the two datacenters are red. connected together. As I understand with the enterprise version multiple pollers can be deployed within the topology to scale vertically where in our scenario we would place them in our datacenters as everything is reachable from there (DC and WAN equippement on remote sites). How would we monitor both regions? Our concern is that the latency between the datacenters (~120ms) could cause some issues and might slow in response if the gui,rrd and mysql servers are hosted in one region. Can the rrd and mysql servers deployed redundant - one node in EU and the second in NA and also each region a local gui instance? Or is it possible to run a separate instance in each region and have a common gui with visibility of all devices? We possibly might also monitor the LAN equipment of the sites in the future - that might add a couple of thousands devices per region (no real numbers known yet) We have a network team and service desk in each region, where we have about 1.500 datacenter and WAN devices in each region to monitor in the first step - we are calculating to have around 30 people from each region using the gui daily. Does someone have such a setup? We setup the CE for testing and we would go ahead using it globally, but not sure how the setup should/would like for that and we haven't found anything in that direction... Thanks, Alex

2 1

Cisco DCM
by Kamil Wojtas 24 Jan '19

24 Jan '19

Are there any plans for monitoring Cisco DCM 9900/9902 devices?

2 1

Alert Checker not picking up newly added switches
by Sam Jones 23 Jan '19

23 Jan '19

Observium, I had to do a manual rebuild of Alert Checkers to add new devices. These devices are newly added in the last 6 months. Is this expected behaviour and if so can I automate a rebuild of the Alert Checkers as I don't want to have to remember to click the rebuild button every month/week/day? Sam

2 2

Tp-link switch showing no stats even tho debug shows stats?
by Simon Mousey Smith 23 Jan '19

23 Jan '19

Hi All, Im trying to work out if the is something wrong with my switch or observium? Observium detects all the ports fine, vlans fine, But its not showing any traffic on the ports? And when I run the -dd in the poller.php the output shows that the is traffic on the ports? Attached is the debug and a screenshot showing the ports in observium Regards Simon

4 13

Poseidon2 4002 dry contact check
by Laszlo Nemeth 23 Jan '19

23 Jan '19

Hi All, We have some new HWGroup - Poseidon 24002 devices with dry contacts (digital) connected to door sensor in our racks and some temperature sensors. Our current Observium (r9667) can see the temperature sensors but not the dry contact. There is any way to get the status of the contacts? It would be nice to do alerts if somebody open the rack cabinets. Thanks! Br Laszlo -- László Németh Senior Network Engineer [emarsys]<http://www.emarsys.com/> Emarsys-Technologies Kft Kossuth Lajos utca 7-9. II. emelet 1053 Budapest T: +36 1 781 6001<tel:+36%201%20781%206001> E: laszlo.nemeth(a)emarsys.com<mailto:laszlo.nemeth@emarsys.com> W: www.emarsys.com<http://www.emarsys.com> » Get the latest insight from Emarsys<http://emarsys.com/en/resources/whitepapers/> This email and any attachments contain confidential information for the intended recipient to which it has been addressed. This information may not be copied nor disclosed to any third party without prior permission of the sender. If you are not the intended recipient, or if received in error, please contact the sender immediately and delete this email from your system. emarsys eMarketing Systems AG does not accept responsibility for losses and any other damages resulting from information, including viruses and other harmful content, contained in this email and any attachments.

1 0

Alert message in event log
by Ming Wong, CLSA 22 Jan '19

22 Jan '19

Hi team, I am running Observium Professional 18.10.9472. An alert check has been created for monitoring high CPU. The Default Notifier (email) works fine, but there is no alert message in the Observium event log. In Device Property -> Alert Settings, I have the option to choose "Disable alerts -Don't send alert emails (but write to eventlog)". When enabled and threshold is reached, there is no alert message in the event log either. How can event logging for alarms be enabled ? Thanks for advice. Ming The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

2 1

SLA polling
by Andre.Punt＠kpn.com 21 Jan '19

21 Jan '19

Hi, I have an old server running observium and am busy migrating to a new server. Currently running into the following problem: ##### Module Start: sla ##### o CISCO-RTTMON-MIB CMD[/usr/bin/snmpbulkwalk -Cr'100' -t '1' -r '5' -v2c -c *** -Pu -OQUs -m CISCO-RTTMON-MIB -M /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp 'udp':'host':'161' rttMonCtrl] CMD EXITCODE[1] CMD RUNTIME[0.0451s] STDOUT[ ] STDERR[ MIB search path: /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp Cannot find module (CISCO-RTTMON-MIB): At line 1 in (none) rttMonCtrl: Unknown Object Identifier (Sub-id not found: (top) -> rttMonCtrl) ] SNMP STATUS[FALSE] SNMP ERROR[#996 - MIB or oid not found] Updated this morning (r9661) but still the same problem Base install is in /appl/observium The MIB is present in the path: /appl/observium/mibs/cisco/CISCO-RTTMON-MIB Any ideas where to start looking to solve this? (also had the problem in r9472 and in r8959 but worked before that) Regards, André

4 7

Hard Drive Alert Checking
by Benjamin Moore 18 Jan '19

18 Jan '19

I've got a condition where one of the hard drives in my Cisco C240 chassis failed. Is there a way to build an alert checker to check on the status of drives in a server?

3 6

Disabling redundancy/stack metrics for standalone Cisco switch
by Peter Watts 18 Jan '19

18 Jan '19

Hello, I have commissioned a few new Cisco 3650 switches (WS-C3650-24TD-L) which are stacking-capable, but I have them running standalone. They're on IOS XE 16.6.5 and Observium is detecting/reporting the redundancy attributes for these switches but because they're not stacked, I'm getting an alert for 'nonRedundant'. cRFCfgRedundancyOperMode = 1 Is there a way I can force Observium to ignore the redundancy metrics for these switches? I tried disabling CISCO-RF-MIB on the device but it still persists and when I run './poller.php -h my3650switch -m status' I see the redundancy attributes coming through (assumed I shouldn't? not sure). Observium 19.1.9673 EB Games | ZiNG Pop Culture | Peter Watts | Infrastructure Supervisor | Australia & New Zealand | Peter.Watts(a)ebgames.com<mailto:Peter.Watts@ebgames.com> | +61 7 3860 7757 | 0438 636 110

2 4

Dashboard: Syslog-Widget Filter
by Wiethoff, Helge 17 Jan '19

17 Jan '19

Hi, since the introduction of the new dashboard, the filtered display of the syslog-entries no longer works. Previously (TM) it could be configured in config.php: $config['frontpage']['syslog']['priority'] = array(0,1,2,3); Is it possible that it will work again? Cheers Helge

2 1