- observium - lists.observium.org

Function gone missing
by Mike Hyslop 04 Apr '18

04 Apr '18

Hi guys. I have noticed that our weathermap has stopped updating, when I run it in debug mode it moans about function check_extension_exists() being missing. I have had a quick look through the source and can't see that function anywhere. Not sure if its been depreciated or renamed (or if it was surplus to requirements and simply removed) Cheers. [Accesspoint Logo] [Roundel Logo] Mike Hyslop Senior Infrastructure Engineer [email icon] mike.hyslop(a)theaccesspoint.co.uk [phone icon] DDI: 020 8102 1121 Office: 020 3189 2645 [website icon] www.theaccesspoint.co.uk<http://www.theaccesspoint.co.uk> [address icon] Accesspoint | Unit 7 | Ashton Gate | Ashton Road | Harold Hill | RM3 8UF [group logos] [website icon] Please think of the environment before you print this email This document should only be read by those persons to whom it is addressed. Accordingly, Accesspoint Group Holdings Ltd and its subsidiary companies disclaim all responsibility and accept no liability (including in negligence) for the consequences of any such persons other than the addressee acting, or refraining from acting, on such information prior to the receipt by those persons of subsequent written confirmation. If you have received this e-mail message in error, please notify us immediately by telephone (0203 189 2645). Please also destroy and delete the message from your computer. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and/or publication of this e-mail message is strictly prohibited. Accesspoint Group Holdings Ltd, Accesspoint Technologies Ltd and Accesspoint Legal Services Ltd are companies registered in England and Wales. www.theaccesspoint.co.uk<http://www.theaccesspoint.co.uk/> The risk of fraud relating to emails and bank account details has increased. We will NOT email you to tell you that our bank account details have changed; any such email is a scam. Please check our bank account details with us in person if you are in any doubt. We will not accept responsibility if you transfer money into an incorrect account.

1 0

"External Web URL" not set or incorrect,
by Eric W. Bates 03 Apr '18

03 Apr '18

I'm getting the message: Setting 'web_url' for "External Web URL" not set or incorrect, please update on Global Settings Edit page. I'm currently connecting to the URL: https://observium.whoi.edu/ And the setting is: http://observium.whoi.edu/ However, the settings page will not accept the 's' character. Every time I add it, it simply disappears again. The defaults in includes/defaults.inc.php has: #$config['base_url'] = "http://localhost/"; // Not recomend change this, only if autodetect wrong. Used in WUI #$config['web_url'] = "http://localhost:80/"; // This same as base_url but used only in cli for example in alerts Should I change to: $config['web_url'] = "https://localhost:443/" -- Clark 159a, MS 46 508/289-3112

1 0

BitRRD: Blockchain-based data storage for Observium
by Adam Armstrong 02 Apr '18

02 Apr '18

Hi Guys, We're proud to announce that we're switching to BitRRD, the new blockchain-based metric storage format. http://www.observium.org/blockchain/ The migration should be seemless, provided your server has 6-8 GPUs installed when you perform the update. Thanks, adam.

6 9

taildrops counted as errors since junos 15.X on EX series
by Arne Van Theemsche 01 Apr '18

01 Apr '18

Hi, we started to upgrade our juniper EX switches to 15.X release and notice a change of behaviour in error reporting at interface level in observium the problem lays that taildrops (which are activated by default and cannot just be, and isn't even a good practice to disable them) are now reported as errors in observium Output errors: Carrier transitions: 29, Errors: 0, Drops: 177209, Collisions: 0, Aged packets: 0, FIFO errors: 0, HS link CRC errors: 0, MTU errors: 0, Resource errors: 0 show interfaces queue xe-0/0/4 .... Tail-dropped packets : 177209 ...... prior to 15.X we only received reports/mails if the Errors Value was > 0. Honestly, we only care about errors, because taildrops will always happen from time to time I don't know if this is a change in behaviour of juniper snmp counters or that this is a flag in observium we can toggle? thx Arne

2 1

Question on Traffic Comparison widget
by Aaron Mayfield 28 Mar '18

28 Mar '18

I’ve been messing around with the Default Dashboard since I noticed it recently. What should the Traffic Comparison widget show? For me, I’m getting the red Draw Error: [cid:image001.png@01D3BD1D.F03E1CA0] Is this something that should be working as of now? Thanks Aaron Mayfield

2 1

Create Load Averages Alert Checker
by H Box 28 Mar '18

28 Mar '18

Hi All, I create successfully a alert for device downtime and diskspace use, but cannot find the right info to create a alert for load averages into http://www.observium.org/docs/entities Can someone help me with this? Thanks allot for your feedback.

6 7

Re: [Observium] Can't write new info to Observium
by Karolis Birgėla 28 Mar '18

28 Mar '18

On 2017.02.22 14:00, observium-request(a)observium.org wrote: > Can't write new info to Observium I've attached a picture of how it looks like in the device search. You can see that some devices don't have their models written. It's actually important, as we have many devices in Observium.

2 1

Clearing Alerts
by mal＠platinumnetworks.com.au 28 Mar '18

28 Mar '18

Hi all - I have created my very first alert checker and can see that it creates and alert according to the checker criteria. My checker looks for speed on a port and alerts if ge 100M. >From what I can see, once that alert has been created I do not have the ability to 'clear' the alert so even if the port speed drops below 100M the alert remains in failed state and if the checker criteria are met again a new alert is not created. My use case is that I need to monitor the bandwidth utilisation on this specific port on an ongoing basis and be alerted each time the speed exceeds say 100M. Appreciate any pointers to show me where I am going wrong. Cheers Mal

2 1

Switch ignored ports
by Luca Sasdelli 26 Mar '18

26 Mar '18

Hi all, on a switch only I see all phy ports as ignored: +---------+-----------+----------+---------+-----------+-----------+---------+ | ifIndex | ifDescr | ifName | ifAlias | ifType | Oper St | Ignored | | | | | | | atus | | +---------+-----------+----------+---------+-----------+-----------+---------+ | 1 | Host Data | host.1.1 | ... | propVirtu | up | no | | | Port | | | al | | | | 2 | Enterpris | lo.1.1 | ... | softwareL | up | no | | | e Network | | | oopback | | | | | s, Inc. S | | | | | | | | ... | | | | | | | 12001 | Enterasys | ge.1.1 | ... | ethernetC | up | yes | | | Networks | | | smacd | | | | | , Inc. 10 | | | | | | | | ... | | | | | | | 12002 | Enterasys | ge.1.2 | ... | ethernetC | up | yes | | | Networks | | | smacd | | | | | , Inc. 10 | | | | | | On the same network there are other Enterasys/Extreme Networks switches and they're regularly discovered. I've deleted and re-created the switch entry, but it doesn't change. What checks should I do? Cheers Luca

3 3

Traffic Accounting
by Serghei Golipad 26 Mar '18

26 Mar '18

Guys, Is there anyway of setting traffic accounting graphs to MRTG style too? Thank you. PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

2 1

export to Influx question (any news ?)
by Edvinas K 25 Mar '18

25 Mar '18

Hello, Is't possible officially or there're some ways to export data to influx Db and then use it on grafana ? Thanks

1 0

Switch ports disappearing
by Luca Sasdelli 25 Mar '18

25 Mar '18

Hi all, I've a TP-Link T2600-28TS whose ports are continuously detected and then deleted after 2-10 minutes: this happens about every 6 hours, while other switches in the same environment does have normal behaviour. Of course the switch does operate normally all the time. 2018-03-24 18:45:38Interface was marked as DELETED2018-03-24 18:38:55Interface DELETED mark removed2018-03-24 12:45:39Interface was marked as DELETED2018-03-24 12:38:44Interface DELETED mark removed2018-03-24 06:41:37Interface was marked as DELETED2018-03-24 06:39:44Interface DELETED mark removed2018-03-24 00:45:43Interface was marked as DELETED2018-03-24 00:38:49Interface DELETED mark removed2018-03-23 18:50:39Interface was marked as DELETED2018-03-23 18:39:30Interface DELETED mark removed Any ideas? Thanks Luca

3 4

Re: [Observium] Switch ports disappearing
by Mike Stupalov 25 Mar '18

25 Mar '18

Try to enable separate_walk feature for device: https://screenshots.firefox.com/rpjjOJdKtCQtvSmg/demo.observium.ru > Luca Sasdelli <mailto:luca@sasdelli.it> > 25 March 2018 at 00:08 > Hi Markus, > it is within 60sec all the time (avg 55,1", max 104,6"). > As per comparison, a switch stack with 96 ports on same network is polled with 12,4" average and 54,6" max. > Cheers > Luca > ------ Messaggio originale ------ > Da: "Markus Klock" <markus(a)best-practice.se <mailto:markus@best-practice.se>> > A: "Observium Network Observation System" <observium(a)observium.org <mailto:observium@observium.org>> > Inviato: 24/03/2018 21.17.15 > Oggetto: Re: [Observium] Switch ports disappearing > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > Markus Klock <mailto:markus@best-practice.se> > 24 March 2018 at 23:17 > How does the device performance look? Is polling completed in less than 300s? > /Markus > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

1 0

Monitor VPN
by Hermes J. Martinez 24 Mar '18

24 Mar '18

Hi, There is a way to monitor(Traffic) a vpn with Observium? kind Regards Hermes J. Martinez Asistente De Sistemas <mailto:hermes.martinez@pueblobonito.com.mx> hermes.martinez(a)pueblobonito.com.mx (669) 989-8900 | EXT 8656 <http://www.pueblobonito.com/> www.pueblobonito.com.mx <http://www.pueblobonito.com/real-escape> Read about the Real Escape at Pueblo Bonito Connect with us <https://twitter.com/PuebloBonito> <https://plus.google.com/103008660176547960870/about> <https://www.facebook.com/PuebloBonitoResort> <https://www.instagram.com/pueblobonito/> <http://www.pueblobonito.com/blog/> Do you really need to print this e-mail? En realidad necesita imprimir este correo? Aviso Legal / Legal Notice http://img.pueblobonito.com.mx/legal

2 1

FW: Defining Groups
by mal＠platinumnetworks.com.au 24 Mar '18

24 Mar '18

Thanks Adam – Have updated to rolling (9128) and can see the groups is now different but I am still not seeing any members in my group ☹. I am thinking that the ruleset itself is not working because I created another group that does work using “device.hostname match *qld*”. Is the ruleset definition ‘port.port_descr_descr match *L3*’ correct if I want all ports with a parsed description including L3? My port description is something like… CUST: ABC Cust (Channel Wireless L3)…….. I was expecting the ruleset to match on *L3* and return results including L3. Thanks From: observium <observium-bounces(a)observium.org <mailto:observium-bounces@observium.org> > On Behalf Of Ron Marosko Sent: Saturday, 24 March 2018 12:05 PM To: 'Observium' <observium(a)observium.org <mailto:observium@observium.org> > Subject: Re: [Observium] Defining Groups Fixed. Thank you! From: observium <observium-bounces(a)observium.org <mailto:observium-bounces@observium.org> > On Behalf Of Adam Armstrong Sent: Friday, March 23, 2018 8:17 PM To: observium(a)observium.org <mailto:observium@observium.org> Subject: Re: [Observium] Defining Groups It dose help if I remove all of the debugging! Try now :) adam. Adam Armstrong Managing Director & Lead Architect Observium Limited http://www.observium.org http://docs.observium.org http://jira.observium.org On 2018-03-24 01:07:25, Ron Marosko <ron(a)rjr-services.com <mailto:ron@rjr-services.com> > wrote: Howdy Adam, I was seeing this on build 9125, just svn upped to 9126, and still seeing the same thing on a discover run: PHP Fatal error: Uncaught Error: Call to undefined function r() in /opt/observium/includes/groups.inc.php:1036 Stack trace: #0 /opt/observium/includes/groups.inc.php(1009): update_group_table(Array) #1 /opt/observium/discovery.php(191): update_group_tables() #2 {main} thrown in /opt/observium/includes/groups.inc.php on line 1036 root@observium:/opt/observium# …Ron From: observium <observium-bounces(a)observium.org <mailto:observium-bounces@observium.org> > On Behalf Of McDonald Richards Sent: Friday, March 23, 2018 6:52 PM To: Observium <observium(a)observium.org <mailto:observium@observium.org> > Subject: Re: [Observium] Defining Groups Perfect :) On Sat, Mar 24, 2018 at 10:47 AM, Adam Armstrong <adama(a)observium.org <mailto:adama@observium.org> > wrote: Ok, I've removed the r() call. Thankfully because it failed, it won't have progressed the schema counter, so you can re-run it now! Thanks, adam. Adam Armstrong Managing Director & Lead Architect Observium Limited http://www.observium.org http://docs.observium.org http://jira.observium.org On 2018-03-23 23:46:05, Adam Armstrong <adama(a)observium.org <mailto:adama@observium.org> > wrote: shit :) Adam Armstrong Managing Director & Lead Architect Observium Limited http://www.observium.org http://docs.observium.org http://jira.observium.org On 2018-03-23 23:45:14, McDonald Richards <mcdonald.richards(a)gmail.com <mailto:mcdonald.richards@gmail.com> > wrote: Updating to 9125 threw these errors on a Centos based install: -- Updating database/file schema 367 -> 368 # (php) Migrating groups to new format PHP Fatal error: Uncaught Error: Call to undefined function r() in /opt/observium/includes/groups.inc.php:738 Stack trace: #0 /opt/observium/update/368.php(14): parse_qb_ruleset('port', Array) #1 /opt/observium/includes/functions.inc.php(304): include('/opt/observium/...') #2 /opt/observium/includes/update/update.php(143): include_wrapper('/opt/observium/...') #3 /opt/observium/discovery.php(119): include('/opt/observium/...') #4 {main} thrown in /opt/observium/includes/groups.inc.php on line 738 Observium 18.3.9125 (23rd March 2018) OS Linux 3.10.0-514.26.2.el7.x86_64 [amd64] (CentOS 7) Apache 2.4.6 (CentOS) OpenSSL/1.0.2k-fips PHP/7.0.25 SVN/1.7.14 PHP 7.0.25 (OPcache: ENABLED) Python 2.7.5 MySQL 5.5.56-MariaDB (extension: mysqli 5.5.56-MariaDB) SNMP NET-SNMP 5.7.2 RRDtool 1.6.0 Any tips? On Sat, Mar 24, 2018 at 10:39 AM, Adam Armstrong <adama(a)memetic.org <mailto:adama@memetic.org> > wrote: Hi, The groups matching system has recently been rewritten. Please update to the latest SVN :) (This might be difficult if you chose to use the stable branch, since these changes aren't in stable yet) Adam. Sent from BlueMail <http://www.bluemail.me/r?b=12512> On 23 Mar 2018, at 23:16, mal(a)platinumnetworks.com.au <mailto:mal@platinumnetworks.com.au> wrote: Hey all – probably a dumb newbie questions so apologies… I am trying to define groups based on the contents of the port description. I am using this as a training ground before I move on to alert checkers! I have edited the port description to include L3 and I can see that Observium is retrieving the port descriptions correctly however I do not seem to be able to define a group correctly. I have created a group as below: i.e. Based on containing “L3” in the port description add to the group. I can confirm that there are 15+ devices containing “L3” – example… If I do a search on ports containing L3 I retrieve the full list of devices. I originally thought I had made the query too tight but I’ve tried a number of broad combinations and never seem to have any members found. I am using 18.3.9073 (3rd March 2018). What am I missing? 😊 Cheers Mal _____ observium mailing list observium(a)observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 3

Alert Checks
by Eduardo Silvestre 24 Mar '18

24 Mar '18

Hello Guys, I'm trying to figure out some way to check "out of sync" state of APC ATS 7724. I've tried this way but didn't work: Any idea to implement this? Best Regards,

2 1

Defining Groups
by mal＠platinumnetworks.com.au 24 Mar '18

24 Mar '18

Hey all – probably a dumb newbie questions so apologies… I am trying to define groups based on the contents of the port description. I am using this as a training ground before I move on to alert checkers! I have edited the port description to include L3 and I can see that Observium is retrieving the port descriptions correctly however I do not seem to be able to define a group correctly. I have created a group as below: i.e. Based on containing “L3” in the port description add to the group. I can confirm that there are 15+ devices containing “L3” – example… If I do a search on ports containing L3 I retrieve the full list of devices. I originally thought I had made the query too tight but I’ve tried a number of broad combinations and never seem to have any members found. I am using 18.3.9073 (3rd March 2018). What am I missing? 😊 Cheers Mal

5 8

Snmp location question
by Pico Leto 23 Mar '18

23 Mar '18

What kind of hierarchical format can be used for snmp location on devices that are polled with Observium? Is it possible to include cage information as well as location?

1 0

Syslog part messages
by Simon Mousey Smith 23 Mar '18

23 Mar '18

Hi All Has anybody else seen this recently in an SVN update? For some reason the syslog is only show part of a syslog message from our switches and inserting into observium? Also where has this [Program][Tags] appeared from? Regards Simon

4 20

export availability rrds
by Gerd Müller 23 Mar '18

23 Mar '18

Hi list, we use observium for monitoring a lot of devices. Now I need to report the availability per device through a report. Is there any option to export those values? What would be the best way to do this? Thanks Gerd Mit freundlichen Grüßen / With kind regards Gerd Müller • Proact Deutschland GmbH Service Manager Telefon: +49 911 30999 293 • Fax: +49 911 30999 99 Südwestpark 43 • 90449 Nürnberg • Germany Gerd.Mueller(a)proact.de • www.proact.de Amtsgericht Nürnberg • HRB 18320 Geschäftsführer: Oliver Kügow • Richard Müller • Jakob Høholdt – Delivering Business Agility –

3 5

Observium – Netapp
by Krenek Milan DiS. 23 Mar '18

23 Mar '18

Hello, Can you please integrate to Observium – Netapp. Actually we have basic graphs with volumes, but we miss there fail disk and others environment items. IOPS operations will be of course fine to have in graphs. ☺ In attachment is last mibs file from netapp for version 9.2 [cid:image001.png@01D39B73.17F25C60] Thanks S přátelským pozdravem / Mit freundlichen Grüßen Milan Křenek IT - Infrastructure Team / CZ [Zambelli] Unsere AGB finden Sie auf www.zambelli.cz<https://www.zambelli.cz/index.php?id=321>

5 11

Changing SNMP community for multiple devices
by Christian Eriksson 23 Mar '18

23 Mar '18

Hi, We have x amount of switches that we need to change SNMP community on. Is there an easy way of doing it instead of 1-by-1 in web GUI? Regards Christian

3 2

Traffic Accounting
by mal＠platinumnetworks.com.au 23 Mar '18

23 Mar '18

Hi all - Have just upgraded to the subscription version and looking to understand what functionality I can get out of the traffic accounting. There are 2 initial aims I'd like to get some thoughts about. 1. Creating alert/email notification based on the outbound total traffic from specific ports. Example: if total outbound data for the current billing period is equal to 50% of quota, email customer. Similarly for say 75%, 90% and 100% of quota. 2. Configure bill to compare only outbound traffic to quota when calculating overusage. I am hoping someone may have tried previously and can give me some direction. Appreciate any thoughts. Mal

1 0

New device / custom graph
by Steffen Schwebel 22 Mar '18

22 Mar '18

Greetings o/ I have an instance with observium running and am trying to add a new device/graph for it. There seems to be little information for this. I tried looking into the mailing list archive as well at http://postman.memetic.org/pipermail/observium/ but get a 403. So, forgive me for asking again what must be a frequent question. My device is a PDU from "Gude" described by MIB GUDEADS-PDU818X. I can see that there are already devices from "Gude" in the source like "Gude Expert PDU" described by GUDEADS-PDU8110-MIB but so far I have not been successful. Are there any documents, guides or anything that you can recommend? Any help is greatly appreciated. Best regards, Steffen Schwebel

4 4

NTP agent issue
by Ron Marosko 22 Mar '18

22 Mar '18

Howdy Adam, et. al., I've run into an issue with the agent ntpd script on certain of my servers where the command "ntpdc -c iostats" times out with no response. However, the equivalent command used with ntpq works fine and provides the correct information Witness: root@observium:/opt/observium# ntpdc -c iostats localhost: timed out, nothing received ***Request timed out root@observium:/opt/observium# ntpq -c iostats time since reset: 1116387 receive buffers: 10 free receive buffers: 9 used receive buffers: 0 low water refills: 1 dropped packets: 0 ignored packets: 0 received packets: 140116 packets sent: 145459 packet send failures: 0 input wakeups: 140118 useful input wakeups: 140118 root@observium:/opt/observium# Yes, that is actually on the VM running observium. For simplicity of minimum changes to the script, I made the following change: // START SETTINGS /// $ntpq = "ntpq"; $ntpdc = "ntpq"; // END SETTINGS /// End result is this: You can see where I made the change to the script yesterday afternoon. The related version of ntpd is: ntpd - NTP daemon program - Ver. 4.2.8p4 I don't know if you want to push this out as a change overall, but wanted to make you aware of this so that it's documented somewhere at least. Regards, Ron -- Ron Marosko, Jr. . . . . . . . . . . . . . . . . . . . . . . . . . . CCIE No. 4526 (R/S), NN5DX Senior Network Engineer RJR Services, Inc. 1108 West Dickinson Blvd, Suite A Fort Stockton, TX 79735 USA o: +1 432 336 5600 x115 c: +1 432 290 6344 e: <mailto:ron@rjr-services.com> ron(a)rjr-services.com pgp pubkey: <http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x778B3B0258AB8B5C> 0x58AB8B5C "To know me is to fly with me." -- This message has been scanned by E.F.A. Project and is believed to be clean.

5 5

Pseudowires
by Peter Derissen 21 Mar '18

21 Mar '18

Hello, In the menu Ports -> Pseudowires -> All types i can only find the pseudowires that start on a cisco machine. Nu juniper are in that list (there are a few as destination node). Do I have to configure something to show the Juniper routing instances? Regards, Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening]<http://www.eurofiber.nl/> Volg ons op Twitter<https://twitter.com/Eurofiber> | Linkedin<https://www.linkedin.com/company/eurofiber> | Youtube<https://www.youtube.com/user/Eurofibergroup> ******** IMPORTANT NOTICE ******** This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system. Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof. Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01.

5 19

Port Percent Graph looks messy (9107)
by Serghei Golipad 19 Mar '18

19 Mar '18

Hi, Has anyone else encountered this issue after latest updates (rolling). Graph format is set to 'none' [cid:image001.jpg@01D3BF8D.6E924510] Thank you. PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

3 9

CBQoS
by Ian Armstrong 15 Mar '18

15 Mar '18

Hi When the CBQoS feature will be fully released? I am using the unofficial (?) feature in the CE edition (about below). I have purchased a subscription but the CBQoS isn't supported their yet. I'm finding it a bit buggy (understandably since it hasn't been officially released). Ian Observium CE 17.9.0 (25th September 2017) OS Linux 4.4.0-62-generic [amd64] (Ubuntu 16.04) Apache 2.4.18 (Ubuntu) PHP 7.0.25-0ubuntu0.16.04.1 (OPcache: ENABLED) Python 2.7.12 MySQL 5.7.17-0ubuntu0.16.04.1 (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.5.5 Ian Armstrong Principal Academic Staff Member School of Information Technology DDI: +64 4 830 3055 Email: ian.armstrong(a)weltec.ac.nz<mailto:joe.serci@weltec.ac.nz> URL: www.weltec.ac.nz<http://www.weltec.ac.nz/> WelTec Private Bag 39803, Lower Hutt 5045 Wellington, New Zealand [1504644128592_PastedImage]

3 6

How to configure libvirt in observium CE?
by Vikas Kumar 15 Mar '18

15 Mar '18

Hello all, I want to configure libvirt in observium. Can someone please help me how to do that? -- <http://moodi.org/> *Vikas Kumar | ** Hospitality & PR Coordinator* *Mood Indigo, IIT Bombay* *+91-9694532954 | mailvikasnow(a)gmail.com <mailvikasnow(a)gmail.com>* [image: Facebook] <https://www.facebook.com/vikas.cse.iitb> <https://mailtrack.io/> Sent with Mailtrack <https://mailtrack.io?utm_source=gmail&utm_medium=signature&utm_campaign=sig…>

1 0

any examples of developing a new PDU in observium?
by Darrell Budic 14 Mar '18

14 Mar '18

Going to try and setup a couple Starline Bus heads in observium, basically a big PDU with it’s own MIBS. http://www.starlinepower.com, the Critical Power Monitoring units. Anyone have any examples of something similar or a new PDU that could point me in the right direction for this? Thanks, -Darrell

1 0

Logging changes to Observium
by Josh Williams 14 Mar '18

14 Mar '18

Is there a way to log who is doing what whithin Observium? I would like to be able to tell who is adding or deleting devices, making changes to the config, or making any changes to Observium for that matter. I am not able (allowed) to lock down the config by making changes in the config.php. I have to keep the configs open to be changed by anyone on the team. This is truthfully a null point as the admin and root passwords are mandated to be stored in our team password vault anyway. I'd like a way to make others accountable for their actions. Thanks, Josh

1 0

proxmox support
by Art Stephens 13 Mar '18

13 Mar '18

I see these php scripts at https://github.com/pgmillon/observium/tree/master/includes/polling/unix-age… DO I just copy the script to the appropriate folder? -- Arthur Stephens Senior Network Administrator Ptera Inc. PO Box 135 24001 E Mission Suite 50 Liberty Lake, WA 99019 509-927-7837 ptera.com | facebook.com/PteraInc | twitter.com/Ptera ----------------------------------------------------------------------------- "This message may contain confidential and/or propriety information, and is intended for the person/entity to whom it was originally addressed. Any use by others is strictly prohibited. Please note that any views or opinions presented in this email are solely those of the author and are not intended to represent those of the company."

2 5

Ubiquiti EdgeSwitch 16 Port 10G missing light levels
by Kaiser, Erich 13 Mar '18

13 Mar '18

Looks like most of the stats are there except for optical light levels? Erich Kaiser The Fusion Network erich(a)gotfusion.net Office: 815-570-3101

3 2

disabling alert re-notification.
by Edvinas K 12 Mar '18

12 Mar '18

Hello, i wanted to know if it's possible to turn off alert resending. I see we have this option in config.php: $config['alerts']['interval'] = 86400; // How frequently to re-send a notification for a continuing alert condition do changing it to zero will stop it ? Thank you

2 2

templates for send text plain messages
by Arnoldo Vidal Bravo 12 Mar '18

12 Mar '18

how it works the emial templates? i need send notifications to SMS (customized). Email more short's or a Text plain . -- Saluda cordialmente

1 0

Add ap9606 using powernet-mib
by Simon Mousey Smith 12 Mar '18

12 Mar '18

Hi All Im trying to work out how to add power information to observium (manually as it doesnt seem to be picked up) I currently monitor a ap9212 power switch (network card is a ap9606) but it only gives me lan stats and no power information I found if I added the powernet-mib to my mid browser and then did a walk on the apc private oid .1.3.6.1.4.1.318 it revealed all sorts of information which is very useful! I can provide read access to the device if need be I would be so happy if we can get power statuses off these tho :D Regards Simon - Hestor Ltd

4 12

User configurable device-specific Connect Via link
by Randy Schultz 09 Mar '18

09 Mar '18

Posted this earlier today in Jira as an Improvement but got to thinking I should have first emailed here... ***************** Am an MSP / MSSP that's new to Observium... See from the Device drop down the ability to Connect Via Telnet / SSH / etc to some of my devices (eg Vmware) but don't see this option for my (SonicWALL) firewalls. Would very much like to have the ability to manually configure a device-specific Connect Via link. For example... https://1.2.3.4 https://1.2.3.4:4443 I've looked through several of the MySQL tables where I thought I might find this info but couldn't find anything. Am I just missing it or is this not an option today? -- Randy Schultz

2 1

FQDN in syslg
by Luca Sasdelli 09 Mar '18

09 Mar '18

Hi, does it exist a config value to show the devices FQDN within Syslog? Here we monitor devices from several companies and it would be needed, to discriminate between them. Thanks Luca

4 4

RANCID integration
by Martin Snygg 08 Mar '18

08 Mar '18

Hi We have a RANCID installation on another server than Observium is running on, is there a way to integrate that? Looks pretty straightforward if RANCID is installed on the same machine as Observium but not if it is on another machine. Martin Snygg

2 1

RANCID integration
by Martin Snygg 08 Mar '18

08 Mar '18

Hi We have a RANCID installation on another server than Observium is running on, is there a way to integrate that? Looks pretty straightforward if RANCID is installed on the same machine as Observium but not if it is on another machine. Martin Snygg

1 0

FDB table
by todevnull＠free.fr 08 Mar '18

08 Mar '18

Hello all, First of all, i would like to tanks all people that made this great tool ! :) I'm still preparaing the migration from our old tool to Observium. So, i am playing/testing it with some Cisco devices. A strange thing that i observed is that the FDB tables show mac addresses on switch interfaces that are in trunk mode only (dot1Q flagged). Do i need to setup or declare something somewhere ? Thank in advance for your help. Tarik. Observium 18.3.9076 (6th March 2018) OS Linux 3.16.0-4-amd64 [amd64] (Debian 8.5) Apache 2.4.10 (Debian) PHP 5.6.23-0+deb8u1 (OPcache: ENABLED) Python 2.7.9 MySQL 5.5.50-0+deb8u1 (extension: mysqli 5.0.11-dev) SNMP NET-SNMP 5.7.2.1 RRDtool 1.4.8

4 8

Importing MIB file
by Ricardo Franco Cantero 07 Mar '18

07 Mar '18

Hi, We have a MIB file which we want to import, preferably through the GUI. How can we do this? Met vriendelijke groet, Ricardo Franco Cantero

2 1

Update Errors
by Joey Stanford 04 Mar '18

04 Mar '18

Hi, Running /opt/observium/discovery.php -u has suddenly started throwing errors. Any thoughts on a fix? # root @ observium in ~ [8:19:51] $ /opt/observium/discovery.php -u MIB search path: /opt/observium/mibs:/opt/observium/mibs/net-snmp Cannot find module (SNMPv2-MIB): At line 0 in (none) Cannot find module (IF-MIB): At line 0 in (none) Cannot find module (IP-MIB): At line 0 in (none) Cannot find module (TCP-MIB): At line 0 in (none) Cannot find module (UDP-MIB): At line 0 in (none) Cannot find module (HOST-RESOURCES-MIB): At line 0 in (none) Cannot find module (NOTIFICATION-LOG-MIB): At line 0 in (none) Cannot find module (DISMAN-EVENT-MIB): At line 0 in (none) Cannot find module (DISMAN-SCHEDULE-MIB): At line 0 in (none) Cannot find module (HOST-RESOURCES-TYPES): At line 0 in (none) Cannot find module (MTA-MIB): At line 0 in (none) Cannot find module (NETWORK-SERVICES-MIB): At line 0 in (none) Cannot find module (SNMPv2-TC): At line 15 in /opt/observium/mibs/net-snmp/UCD-DISKIO-MIB Cannot find module (SNMPv2-SMI): At line 34 in /opt/observium/mibs/net-snmp/UCD-SNMP-MIB Cannot find module (HCNUM-TC): At line 37 in /opt/observium/mibs/net-snmp/UCD-SNMP-MIB Cannot find module (SNMPv2-TC): At line 40 in /opt/observium/mibs/net-snmp/UCD-SNMP-MIB Did not find 'enterprises' in module #-1 (/opt/observium/mibs/net-snmp/UCD-SNMP-MIB) Did not find 'CounterBasedGauge64' in module #-1 (/opt/observium/mibs/net-snmp/UCD-SNMP-MIB) Did not find 'DisplayString' in module #-1 (/opt/observium/mibs/net-snmp/UCD-SNMP-MIB) Did not find 'TruthValue' in module #-1 (/opt/observium/mibs/net-snmp/UCD-SNMP-MIB) Unlinked OID in UCD-SNMP-MIB: ucdavis ::= { enterprises 2021 } Undefined identifier: enterprises near line 42 of /opt/observium/mibs/net-snmp/UCD-SNMP-MIB …..etc….

4 4

MAC accounting problem
by Art Stephens 01 Mar '18

01 Mar '18

I have MAC accounting enabled on our BGP router trying to see what the usage is of our transit provider is over our peering link. They send me a graph for the week that looks like this. My graph on Observium looks like this. Any adjustments that I can make to fix this? Thanks in advance. P.S. Yes they verified that is their MAC address. -- Arthur Stephens Senior Network Administrator Ptera Inc. PO Box 135 24001 E Mission Suite 50 Liberty Lake, WA 99019 509-927-7837 ptera.com | facebook.com/PteraInc | twitter.com/Ptera ----------------------------------------------------------------------------- "This message may contain confidential and/or propriety information, and is intended for the person/entity to whom it was originally addressed. Any use by others is strictly prohibited. Please note that any views or opinions presented in this email are solely those of the author and are not intended to represent those of the company."

2 1

Mounted storage not seen
by Luca Sasdelli 01 Mar '18

01 Mar '18

Hi, one of our servers has an external network storage, mounted as /mnt/sb1. Here the df printout: Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda3 1905166276 1441999032 366367400 80% / udev 10240 0 10240 0% /dev tmpfs 6548756 687344 5861412 11% /run tmpfs 16371888 0 16371888 0% /dev/shm tmpfs 5120 0 5120 0% /run/lock tmpfs 16371888 0 16371888 0% /sys/fs/cgroup /dev/sda2 499656 56712 416732 12% /boot //u162796.your-storagebox.de/backup 10485760000 3640645235 6845114765 35% /mnt/sb1 tmpfs 3274380 0 3274380 0% /run/user/0 The poller.php can't find the mounted storage instead: ##### Starting polling run at 2018-03-01 10:24:27 ##### ##### xxxxxxxxxx [61] ##### o OS linux o OS Group unix o Last poll duration 0.57 seconds o Last Polled 2018-03-01 10:23:21 o SNMP Version v2c o Device status Device is reachable by PING (3.13ms) and SNMP (13.49ms) o Modules Enabled system, os, storage ##### Module Start: system ##### o SNMPv2-MIB o Uptime 213 days, 40m 39s o Last reboot 2017-07-31 10:44:06 o sysObjectID .1.3.6.1.4.1.8072.3.2.10 o snmpEngineID 80001F88805E3A691D7D1EF25800000000 o sysDescr Linux xxxxxxxxxx 3.16.0-4-amd64 #1 SMP Debian 3.16.43-2+deb8u2 (2017-06-26) x86_64 o sysName xxxxxxxxxx o Location Nuremberg, Germany o Module time 0.1379s ##### Module Start: os ##### o OS Poller Group o Hardware Generic x86 [64bit] o Version 3.16.0-4-amd64 o Features <empty> o Serial <empty> o Asset <empty> o Module time 0.2439s ##### Module Start: storage ##### +-------+--------------------+-------+--------+--------+-------+--------+ | Label | Type | Index | Total | Used | Free | Perc | +-------+--------------------+-------+--------+--------+-------+--------+ | / | host-resources-mib | 31 | 1.77TB | 1.34TB | 441GB | 75.69% | | /boot | host-resources-mib | 55 | 487MB | 55.3MB | 432MB | 11.35% | +-------+--------------------+-------+--------+--------+-------+--------+ o Module time 0.0723s ##### xxxxxxxxxx [61] completed poller modules at 2018-03-01 10:24:28 ##### o Graphs [checked] ping, ping_snmp, uptime, storage o Poller time 0.5446 seconds o Updated Data uptime, last_polled, last_polled_timetaken ##### Completed polling run at 2018-03-01 10:24:28 ##### o Devices Polled 1 o Poller Time 0.575 secs o Memory usage 12MB (peak: 14MB) o MySQL Usage Insert[1/0.007s] Update[12/0.071s] Delete[1/0.012s] Cell[2/0s] Row[17/0.007s] Rows[10/0.004s] Col[0/0s] (0.101s 17.518%) o RRDTool Usage update[6/0.007s] (0.007s 1.25%) o SNMP Usage snmpget[16/0.327s] snmpwalk[1/0.044s] (0.371s 64.468%) Did I miss something? Observium Professional 18.1.9011 under debian 4.9.0-6-amd64 #1 SMP Debian 4.9.82-1+deb9u2 (2018-02-21) x86_64 GNU/Linux Thanks Luca

4 5

Migrating to a new server
by Josh Williams 28 Feb '18

28 Feb '18

We just purchased an upgraded server in which to host Observium on and I would like to know the “best” way to migrate over all of our monitored devices. I’m not concerned with any of the graphed data being migrated, or any of the old Observium config. I only want to do a mass export of all of the devices and their properties. Will a dump of the ‘devices’ and ‘devices_locations’ tables suffice? Are there other tables/directories/configs I need to be concerned about? Thanks, Josh Williams Bureau of Technology Management WI Department of Corrections

3 4

Re: [Observium] SNMP on AXIS IP Cameras
by kayasaman 28 Feb '18

28 Feb '18

Hi, I can't say for Axis bit definitely success with Hikvision to a point. Observium does scan poll add the camera. If needing to be remote monitored from an external network over WAN there are many different ways of doing it. One way could be to use an ipsec vpn tunnel with gre then use a routing protocol like ospf . Then you could use acls as to what gets to the monitoring system etc... Regards, Kaya Sent from my Samsung Galaxy smartphone. -------- Original message --------From: Get Smarts - Web Dev <dev(a)getsmarts.com.au> Date: 2/28/18 12:40 (GMT+00:00) To: observium(a)observium.org Subject: Re: [Observium] SNMP on AXIS IP Cameras Hi Team, Has anyone had any experiences in monitoring AXIS IP Cameras sitting on an internal private network. We have a client with 20 AXIS IP Cameras sitting on a private network who requires outside monitoring of there equipment. We have been reviewing and testing port forwarding etc however would appreciate any feedback or advice that anyone may have on a simple solution (If possible) to add all 20 cameras to our Observium servers. Thank you and Regards, Jeff BarlowThe Development Team | Get Smarts Email: dev(a)getsmarts.com.au

2 1

Re: [Observium] SNMP on AXIS IP Cameras
by Get Smarts - Web Dev 28 Feb '18

28 Feb '18

Hi Team, Has anyone had any experiences in monitoring AXIS IP Cameras sitting on an internal private network. We have a client with 20 AXIS IP Cameras sitting on a private network who requires outside monitoring of there equipment. We have been reviewing and testing port forwarding etc however would appreciate any feedback or advice that anyone may have on a simple solution (If possible) to add all 20 cameras to our Observium servers. Thank you and Regards, Jeff Barlow The Development Team | Get Smarts Email: <mailto:dev@getsmarts.com.au> dev(a)getsmarts.com.au

2 1

Down Ports - Device Reboots
by Art Stephens 28 Feb '18

28 Feb '18

When I first discovered and polled these particular switches (cisco and edgeswitch) the Ports that were down were not showing up on the device_status_boxes. Which is what I expected. But today the equipment at that site was power cycled when we switched over to generator backup while the electricians hooked up the new auto switch over equipment for the new permanent backup generator. Since then device_status_boxes shows all the down ports and that the devices rebooted. So they will not go away. Other software I used in the past had a mechanism to acknowledge them and they would go away. I can find no such mechanism here to clear these unused ports etc. It has almost eight hours and they are still there What am I doing wrong? -- Arthur Stephens Senior Network Administrator Ptera Inc. PO Box 135 24001 E Mission Suite 50 Liberty Lake, WA 99019 509-927-7837 ptera.com | facebook.com/PteraInc | twitter.com/Ptera ----------------------------------------------------------------------------- "This message may contain confidential and/or propriety information, and is intended for the person/entity to whom it was originally addressed. Any use by others is strictly prohibited. Please note that any views or opinions presented in this email are solely those of the author and are not intended to represent those of the company."

2 4

Apps Alert Checker
by Simone Montagnani 27 Feb '18

27 Feb '18

Hi all, I tried to search info online but I cannot find anything about it , I was wondering if I can build an Alert Check using Apache Hits greater of a value for example, or in general if I can do it with any App, can I? Regards to all, Simone

4 3

Syslog Rules per Priority level
by Victor Zele 26 Feb '18

26 Feb '18

Hi, I have syslogs being imported to Observium real-time now and its very helpful and a great feature. My question is we would like to setup an Alert for all Error and Critical level events, but seems you can only do regex expressions on the syslog text message. Am I missing anything or does this require additional feature enhancements? Thanks, Victor -- *CONFIDENTIALITY NOTICE: * *This transmission may contain information which is Vimo, Inc. (DBA Getinsured) confidential and/or legally privileged. The information is intended only for the use of the individual or entity named on this transmission. If you are not the intended recipient, you are hereby notified that any disclosure, copying, or distribution of the contents of this transmission is strictly prohibited. If you have received this transmission in error, please immediately notify me by return e-mail and destroy all copies of the original message.*

1 0

Support for Dell S4048T-Series
by Sananikone, Athideth 25 Feb '18

25 Feb '18

Well, actually it is scanned, but only basic information is displayed. Am 24.02.18, 13:00 schrieb "observium im Auftrag von observium-request(a)observium.org" <observium-bounces(a)observium.org im Auftrag von observium-request(a)observium.org>: Support for Dell S4048T-Series

2 1

Removing Observium
by Art Stephens 24 Feb '18

24 Feb '18

I installed on a linux box in my office to try it out. Loved it so much that I replaced my OpenNMS server with it. But I can not figure out how to get the PC version at my desk to shutdown and stop polling. -- Arthur Stephens Senior Network Administrator Ptera Inc. PO Box 135 24001 E Mission Suite 50 Liberty Lake, WA 99019 509-927-7837 ptera.com | facebook.com/PteraInc | twitter.com/Ptera ----------------------------------------------------------------------------- "This message may contain confidential and/or propriety information, and is intended for the person/entity to whom it was originally addressed. Any use by others is strictly prohibited. Please note that any views or opinions presented in this email are solely those of the author and are not intended to represent those of the company."

4 6

Support for Dell S4048T-Series
by Sananikone, Athideth 23 Feb '18

23 Feb '18

Hi there, anybody knows if the Dell S4048T-Series will be supported? It's a Force10 S-Series though... Regards, Athi

3 2

disable SNMP device_status down as offline on frontpage
by niklaas＠0rb.it 23 Feb '18

23 Feb '18

Hello, I recently ran into a kind of inconvenient behaviour with Observium alerting devices as offline when SNMP on Proxmox nodes gets unresponsive. I already created an alert checker including the condition ‘device_status_type match ping’ which is way more reliable for me in such case. Is there a possibility to disable devices shown as offline in ‘Status Warning and Notifications’ on the frontpage when device_status is offline due to SNMP not responding? Kind Regards, N.

1 0

NetApp Issue
by Ryan, Spencer 23 Feb '18

23 Feb '18

1 0

HAProxy stats
by Franks Andy (IT Technical Architecture Manager) 22 Feb '18

22 Feb '18

Hi all, Feel free to tell me to get stuffed, but I couldn't find an answer anywhere in google or on the mailing list so thought it worth asking.. As a (very) keen user of HAProxy, is it on the roadmap to be an application Observium can monitor? The stats are quite easily gained through something like HAProxyctl or socat interface. Keepalived would be nice too, and has snmp functionality. :) Thanks Andy

2 2

New Device Type
by Serghei Golipad 22 Feb '18

22 Feb '18

Hi Guys, Any chance of adding icon for FiberStore switches? Software is detected by observium as: fsos software https://www.fs.com/ Thank you. PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

1 0

New Device Type
by Serghei Golipad 22 Feb '18

22 Feb '18

Hi Guys, Any chance of adding icon for FiberStore switches? Software is detected by observium as: fsos software https://www.fs.com/ Thank you. PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

1 0

Authentication option
by Jan Horacek 22 Feb '18

22 Feb '18

Hello Adam, I have a specific question about the authentication options. I red the documentation, but didn`t found information exactly. The issue is our company is going to integrate observium to the official MFA authentication process and need to know if observium could use SAML for the SSO authentication or if it`s big issue. We are using Observium Profesional license. thanks for the answer Jan

1 0

APC AP7920B PDU, see status of individual outlets in observium.
by Henrik Cednert (Filmlance) 21 Feb '18

21 Feb '18

Hello Any chance of getting support for the individual outlets on a PDU like the APC AP7920B? This so you can see and monitor if it's on or off. I think I've asked the same for other APC PDU's (AP8981) in the past but can't find that thread so not sure what was said then. I've tried to do an snmpwalk but I think you'll scream at me once again. I'll never learn/remember this. =/ Please go easy on me and point me in the right direction if this sucks: https://pastebin.com/yQztUCwm This is how it looks in observium today: [cid:FE854A64-437B-4E82-ADB1-6EBE575C19E6@metronome.local] -- Henrik Cednert cto | ...and then some Filmlance International mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ]

2 12

templates for mail
by Arnoldo Vidal Bravo 21 Feb '18

21 Feb '18

How it works? I need customize email notifications -- Saluda cordialmente

2 1

Traffic Accounting - Professional version question
by Art Stephens 21 Feb '18

21 Feb '18

I have MAC accounting enabled on my cisco router - will I be able to track traffic based on an individual MAC address? It is one interface with multiple BGP peers. -- Arthur Stephens Senior Network Administrator Ptera Inc. PO Box 135 24001 E Mission Suite 50 Liberty Lake, WA 99019 509-927-7837 ptera.com | facebook.com/PteraInc | twitter.com/Ptera ----------------------------------------------------------------------------- "This message may contain confidential and/or propriety information, and is intended for the person/entity to whom it was originally addressed. Any use by others is strictly prohibited. Please note that any views or opinions presented in this email are solely those of the author and are not intended to represent those of the company."

3 2

Location changes
by todevnull＠free.fr 20 Feb '18

20 Feb '18

Hello all, I'm currently testing the PRO version before deploying it in production in our environment. I will have arround 1500 devices, on which i only have SNMP access. This mean i can't set the location correctly on the SNMP agent BUT, thanks the this great tool, i can set it manually in order to group my devices by locations (arround 250). I'm going to integrate all the devices via a script, but i need to adjust the location for each of them. Is there is a difference by changing the location via the web gui VS changing it on the field 'location' on the 'devices_locations' mysql table ? Thanks in advance for your help. Rds, Tarik.

6 13

Unix-agent not working at remote nodes
by Luca Sasdelli 20 Feb '18

20 Feb '18

Hi Adam, indeed I don't have all software on the machine, but I've removed all scripts but 3 present services, re-run poller and the result is still the same: nothing. ------ Messaggio originale ------ Da: "Adam Armstrong" <adama(a)memetic.org> A: "'Observium'" <observium(a)observium.org> Inviato: 20/02/2018 18:24:26 Oggetto: Re: [Observium] Unix-agent not working at remote nodes Do you have all of that software installed on that server? I think you may have misinterpreted the instructions. Seems replying to mailing list posts isn't the only shortcut in evidence here... Adam

1 0

OpsGenie ObserviumV2 Integration
by Çağla Arıkan 19 Feb '18

19 Feb '18

Hi Adam, We talked about OpsGenie Observium Integration before. As you stated we developed a new integration that does not use generic webhook. By using the payload you sent to runscope we developed ObserviumV2. You can inform your clients that they can reach from "https://app.opsgenie.com/integration#/add/ObserviumV2 <https://app.opsgenie.com/integration#/add/ObserviumV2>" address. The integration is live now. You should fix the endpoint that you send the payload as https://api.opsgenie.com/v1/json/observiumv2 <https://api.opsgenie.com/v1/json/observiumv2>. When you fix that we will deprecate the old one. Regards, Cagla ARIKAN

3 4

Graphs not showing most recent data when refreshing
by Ian Armstrong 18 Feb '18

18 Feb '18

Hi, I have set Refresh pages to 1 minute and web pages are visibly refreshing, however, they do not show the latest data. The refresh just displays the same data between the "Data presets" value. It doesn't make sense to me: having a refresh but only showing the same data. The same problem is occuring for the Event Log display. I have checked around to see if I should be using a different value for Data Presets but they are all just for a particular time period. There is nothing for "Latest 6 hours" or some such this. In an older version of Observium it worked fine. Graphs always refresh to show the latest data. It is only now that I have installed a new version (a fresh install not an upgrade) that this problem has appeared. Many thanks for your help in advance. Version information is below. Versions: Observium CE 17.9.0 (25th September 2017) OS Linux 4.4.0-62-generic [amd64] (Ubuntu 16.04) Apache 2.4.18 (Ubuntu) PHP 7.0.25-0ubuntu0.16.04.1 (OPcache: ENABLED) Python 2.7.12 MySQL 5.7.17-0ubuntu0.16.04.1 (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.5.5 Ian Ian Armstrong Principal Academic Staff Member School of Information Technology DDI: +64 4 830 3055 Email: ian.armstrong(a)weltec.ac.nz<mailto:joe.serci@weltec.ac.nz> URL: www.weltec.ac.nz<http://www.weltec.ac.nz/> WelTec Private Bag 39803, Lower Hutt 5045 Wellington, New Zealand [1504644128592_PastedImage]

4 13

Unifi showing 2 physical memorys?
by Simon Mousey Smith 17 Feb '18

17 Feb '18

Hi All Im just wondering if anybody else has noticed that UniFi APs have suddenly started to show 2 Physical Memorys? Im not sure if its a new firmware issue on the UAPs or something changed in the SNMP on observium? Both values seem to be different and I’m guessing its ment to be Physical Memory and Swap Memory But its showing in the panel as Physical Memory and Physical Memory? Attached is -dd log for poller.php of a UAP device with the latest firmware Regards Simon - Hestor Ltd

4 10

empty disk io graphs for Solaris
by Jeff Kadonoff 16 Feb '18

16 Feb '18

Hi, The bytes/s disk io graphs for Solaris 10 machines are all blank. The iops graphs work. All graphs work for Linux (Debian) machines. This is what I am running: Version Information Observium 17.11.8960 (29th November 2017) OS Linux 3.2.0-4-amd64 [amd64] (Debian 7.11) Apache nginx/1.2.1 PHP 5.4.45-0+deb7u12 Python 2.7.3 MySQL 5.5.59-0+deb7u1 (extension: mysqli 5.5.59) SNMP NET-SNMP 5.4.3 RRDtool 1.4.7 Any ideas?

3 3

Configuring email alerts not to send if top level device is down.
by Williams, Joshua L - DOC 16 Feb '18

16 Feb '18

Is there a way to configure email alerts to only send out emails about a device being down if the top level device is still up. For example we have multiple remote locations across the state, and if the router at the site goes down we don't need the other 50 emails alerts about all devices behind the router. We need some way to introduce a hierarchy to the alerting. Hope this makes sense.. Awesome product by the way. I really like it! Thanks. Josh Williams Bureau of Technology Management WI Department of Corrections CONFIDENTIALITY NOTICE: This electronic mail transmission and any accompanying documents contain information belonging to the sender which may be confidential and legally privileged. This information is only for the use of the individual or entity to whom this electronic mail transmission was intended. If you are not the intended recipient, any disclosure, copying, distribution, or action taken in reliance on the contents of the information contained in this transmission is strictly prohibited. If you have received this transmission in error, please immediately contact the sender and delete the message. Thank you.

3 2

Distributed Observium
by Luca Sasdelli 16 Feb '18

16 Feb '18

Hi all, just joined the ml, read latest posts but no answer found. It seems that Observium doesn't support a distributed monitoring architecture, e.g. mapping remote proxies to access entire remote networks remotely, from a central management (e.g. like Zabbix, NetXMS, OMD etc.). We work with lots of remote customers, so it would be really useful to have a complete overview of their networks. Cheers Luca

2 2

Class Map Names disappearing
by Ian Armstrong 16 Feb '18

16 Feb '18

Hi, I have configured class-maps on a cisco router. They are working fine ( policy and server maps also configured and work ). In the CBQoS display for the interface it shows traffic divided up into each class very nicely. To begin with it entitled each set of graphs with the class map's name. Now that has gone. Is there a fix for this? Another a related question, if I update the class maps the results are not shown in the CBQoS display. Do I need to do a rediscover or some such thing? I have been deleting and adding the device back in but that causes all the historical data to be lost. Help very much appreciated. Version Information Observium CE 17.9.0 (25th September 2017) OS Linux 4.4.0-62-generic [amd64] (Ubuntu 16.04) Apache 2.4.18 (Ubuntu) PHP 7.0.25-0ubuntu0.16.04.1 (OPcache: ENABLED) Python 2.7.12 MySQL 5.7.17-0ubuntu0.16.04.1 (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.5.5 Ian Armstrong Principal Academic Staff Member School of Information Technology DDI: +64 4 830 3055 Email: ian.armstrong(a)weltec.ac.nz<mailto:joe.serci@weltec.ac.nz> URL: www.weltec.ac.nz<http://www.weltec.ac.nz/> WelTec Private Bag 39803, Lower Hutt 5045 Wellington, New Zealand [1504644128592_PastedImage]

4 7

Observium GUI is down.
by Kaustubh Parthasarthy, CLSA 15 Feb '18

15 Feb '18

Hi Team, Observium is installed on one of our servers. We have configured all the requirements, but our Web Page is not opening. Is there any particular service related to observium we need to start ? Can you please suggest Kaustubh Parthasarthy Analyst, Production Management Group D +91 20 6646 8625 | M +91 989 284 4625 | T +91 20 6646 8888 4/F, C-Wing, Panchshil Tech Park-1, Yerawada, Pune 411006, India [:1. Social Media Icons:CLSA_Social Media Icons_linkedin.png]<https://hk.linkedin.com/company/clsa>[:1. Social Media Icons:CLSA_Social Media Icons_twitter.png]<https://twitter.com/clsainsights?lang=en>[:1. Social Media Icons:CLSA_Social Media Icons_youtube.png]<https://www.youtube.com/channel/UC0qWp_lLnOcRYmBlCNQgZKA>[:1. Social Media Icons:CLSA_Social Media Icons_facebook.png]<https://www.facebook.com/clsacommunity/> clsa.com<https://www.clsa.com/> Insights. Liquidity. Capital. [CLSA_RGB]<https://www.clsa.com/member> A CITIC Securities Company The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

2 1

alerting XMPP chat room support
by niklaas＠0rb.it 15 Feb '18

15 Feb '18

Hello, I’ve setup alerting via XMPP, which works just fine for any chatuser-recipient, but it seems like sending notifications into a chat-room (e.g. room(a)conference.example.net <mailto:room@conference.example.net>) is not supported. Any hints if it’s possible to get it running or an implementation is planned? Kind Regards, Niklaas

2 1

Fwd: Monitoring Issue
by Steve Hille 15 Feb '18

15 Feb '18

Greetings folks, I've setup some alert checkers, one of them is from the example site and is for the memory usage greater than 85%. My issue is, I'm monitoring VM's within ESX and all of the VM's alert. [image: Inline image 1] If there is a way to remove the "Real Memory Metrics" from the alert that would fix my issue, does anyone know how to do this? Cheers, Steve

2 1

billing on power use?
by Darrell Budic 14 Feb '18

14 Feb '18

Is it possible to add billing on power usage for PDUs? Could be 95th based or just an average for the monthly time period. Would need to sum a group of devices, each with several phases of power, the “Power” in kW. Guessing this is something that would need a bit of development, would it be something we could sponsor to move forward? -Darrell

1 0

limit number of device_status and device_status_boxes on front page
by Richard Wigzell 14 Feb '18

14 Feb '18

Hello, is there a way to limit the number of device_status and device_status_boxes on front page? Have tried $config['frontpage']['device_status']['max']['count'] = 20 but have like 50-60 showing. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

MGE UPS Inverter Status indicator
by Richard Wigzell 14 Feb '18

14 Feb '18

Hi, we have a number of UPS devices that show the following status indicator as down / fault. It is however in the correct state, can this be changed or can we ignore it in some way? We are on 9055. Many thanks [cid:image001.png@01D3A5A6.43EC4C30] [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

2 6

Unable to add UPS via command line or web interface
by Vikas Kumar 13 Feb '18

13 Feb '18

Hello everyone, I am unable to add one of UPS to my observium. I have tried via using ./add_device.php command as well as using the web interface. However when i do snmp walk "snmpwalk -v 1 -c public ups1.iitb.ac.in" I get the following output iso.3.6.1.2.1.1.1.0 = STRING: "SNMP Agent monitoring DAPC" iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.5763 iso.3.6.1.2.1.1.3.0 = NULL iso.3.6.1.2.1.1.4.0 = STRING: "neelima.patil(a)dbups.co.in" iso.3.6.1.2.1.1.5.0 = STRING: "UPS.MIB" iso.3.6.1.2.1.1.6.0 = STRING: "Near Your Desk" iso.3.6.1.2.1.1.7.0 = INTEGER: 7 But the same does not work while adding the device using the web interface. Please help. -- <http://moodi.org/> *Vikas Kumar | ** Hospitality & PR Coordinator* *Mood Indigo, IIT Bombay* *+91-9694532954 | mailvikasnow(a)gmail.com <mailvikasnow(a)gmail.com>* [image: Facebook] <https://www.facebook.com/vikas.cse.iitb> ‌ <https://mailtrack.io/> Sent with Mailtrack <https://chrome.google.com/webstore/detail/mailtrack-for-gmail-inbox/ndnaehg…>

2 1

monitor lsi megaraid status
by Farshid Abediny 13 Feb '18

13 Feb '18

Hello, i saw i have lsi MIB files on my observium and i have added a centos to my observium but it could not fetch megaraid status, what should i do for monitor megaraid status? thanks

3 8

alert rule
by Farshid Abediny 13 Feb '18

13 Feb '18

Hello Guys, i have an issue with add a alert for raid status . i can see my raid status when i have added my server but how can i add a alert rule that alert me when one of hard disk status is not ONLINE and event is not ok? thanks

1 0

Cambium ePMP radios
by Lyndon Labuschagne 13 Feb '18

13 Feb '18

Hi Admittedly the SNMP implementation seems poor, probably because they have their own agent / management platform. However I can you access to radios that you could do SNMP walks on, etc or I can send you walks if needed. Would adding support of Cambium equipment be considered? Regards Lyndon

2 2

BGP View in Observium: missing AS-Name resolution and searchability
by Friesenecker Fabian 12 Feb '18

12 Feb '18

Hello, In the BGP-View of Observium, we are missing the AS-Name resolution. In earlier revisions the name of the AS was visible and searchable. This was a very convenient thing. [cid:image001.jpg@01D3A022.0D933600] Maybe something is goofed up with our configuration? Has anyone else noticed this? Kind regards, Fabian

3 3

pricing
by Moshe Karbachinsky 12 Feb '18

12 Feb '18

Hi I would like to purchase you subscription edition , before that I would like ask some question 1. £200 is the price for 1 year , what it is contain ( support?) 2. Can I add some checks on my own like service check or process check ? for example I would like to check up/down of a license .. 3. Is there a way I can see relationship map BR, Moshek

1 0

ServerCheck Expansion Module Problem
by Brian Weeks 12 Feb '18

12 Feb '18

Hello, I am having a problem with my ServerCheck Gateway when I use their expansion module. The problem is when I have a sensor (I am using temperature) plugged into the expansion it does not get discovered. I did some digging with my very limited knowledge of PHP and it looks like the serverscheck.inc.php file only references the sensor that you would plug into the gateway .1.3.6.1.4.1.17095.3. But, when you plug a sensor into the expansion module it polls at .1.3.6.1.4.1.17095.11.0. Now I can edit the php and add these value locations to the array at the top and now the values for the sensor plugged into the expansion module appear. But, their descriptions do not show. I have tried everything I know but my very limited knowledge of PHP is hurting me. To make this even more difficult the value it uses to poll the description is sensor1name for the sensors that plug into a gateway. But, for the expansion, the description value is sensor1Name with a capital "N". Please, can someone help me we are using Observium to monitor the temperatures in Walk-in Freezers and Refrigerators and they are really pressing me to get this completed? -- Brian Weeks Network Engineer CCNA, MCSE, ACMT, A+, Network + Brenham ISD 1301 Niebuhr St. Brenham, TX 7783 Office: (979) 277-3760 ext. 2249 Email: bweeks(a)brenhamk-12.net Website: http://www.brenhamisd.net

3 3

Notifications Question
by Hermes J. Martinez 11 Feb '18

11 Feb '18

Hi I Have a Question, I was looking in the documentation for something that can help me, but maybe I don't search with the correct words, there is a way to make something similar to that I Put in the image attach? If One Switch goes down.. The other switches behind it, don't send alerts? Hermes J. Martinez Asistente De Sistemas <mailto:hermes.martinez@pueblobonito.com.mx> hermes.martinez(a)pueblobonito.com.mx (669) 989-8900 | EXT 8656 <http://www.pueblobonito.com/> www.pueblobonito.com.mx <http://www.pueblobonito.com/real-escape> Read about the Real Escape at Pueblo Bonito Connect with us <https://twitter.com/PuebloBonito> <https://plus.google.com/103008660176547960870/about> <https://www.facebook.com/PuebloBonitoResort> <https://www.instagram.com/pueblobonito/> <http://www.pueblobonito.com/blog/> Do you really need to print this e-mail? En realidad necesita imprimir este correo? Aviso Legal / Legal Notice http://img.pueblobonito.com.mx/legal

4 10

Port/CDP map is missing
by Pico Leto 09 Feb '18

09 Feb '18

Hi, I seem to missing my cdp port mapping when i go to Devices => Host => Port => Map. I remember it working a few releases ago. Running 18.1.9004

1 0

OpsGenie Observium Integration
by Çağla Arıkan 09 Feb '18

09 Feb '18

Hi, I work as a software engineer at OpsGenie. Observium has a native integration with OpsGenie, and we have a request for you about configuration of this integration. We are introducing EU OpsGenie. When the customers start using EU OpsGenie, they will not be able to use the integration. When an OpsGenie integration is being configured, Observium sends an HTTP request to https://api.opsgenie.com/v1/json/observiumv2?apiKey=$apikey <https://api.opsgenie.com/v1/json/observiumv2?apiKey=$apikey>, but our OpsGenie EU instance will use another endpoint which is https://api.euopsgenie.com/v1/json/observiumv2?apiKey=$apikey <https://api.euopsgenie.com/v1/json/observiumv2?apiKey=$apikey>observiumv2 <https://api.opsgenie.com/v1/json/monitis?apiKey=$apikey>?apiKey=$apikey. And we're thinking of adding more instances like this. Thus, can you change the OpsGenie integration configuration in a way to let the endpoints to be configurable by users? Best Regards, Çağla from OpsGenie

1 0

Graphic failed
by Marcos Tp 09 Feb '18

09 Feb '18

Hi, My graphics are showing up with this crash in a few moments. Is it some configuration error? I'm monitoring Juniper and Mikrotik equipment

4 7

XMPP Alerts
by Berlo, Clay 08 Feb '18

08 Feb '18

Hi folks, Where might I find documentation for the XMPP Notification Transport? It looks a lot like a stub on the documentation site. Thanks, Clay Berlo Network Systems Administrator DISTRICT SCHOOL BOARD OF NIAGARA 191 Carlton St. St. Catharines, Ontario L2R 7P4 www.dsbn.org<http://www.dsbn.org/> 905-641-1550 x.54013 Achieving Success Together! [I Matter logo]

2 1

SNMP Traps
by O'Connor, Gerry 08 Feb '18

08 Feb '18

Hi, Does Observium provide a mechanism for receiving SNMP Traps from devices for error conditions and then translating those Traps into email notifications? We have a number of power monitors in our environment that do not support snmpget or snmpwalk so Observium cannot poll them for data. The power monitors do support sending Traps when the Power (Amps) being consumed crosses above or below a certain threshold. I looked over docs.observium.org and the FAQ and didn't see anything regarding this. Thanks Gerry

2 1

Observium - Unable to generate email notifications from Syslog Alerts
by Shaun Stokes 07 Feb '18

07 Feb '18

Hi All, Observium Professional 17.11.8960 (29th November 2017) OS: Linux 3.16.0-4-amd64 [amd64] (Debian 8.7) Apache: 2.4.10 (Debian) PHP: 5.6.30-0+deb8u1 (OPcache: ENABLED) Python: 2.7.9 MySQL: 5.5.54-0+deb8u1 (extension: mysqli 5.5.54) SNMP: NET-SNMP 5.7.2.1 RRDtool: 1.4.8 (rrdcached 1.4.8: unix:/var/run/rrdcached.sock) We are unable to generate email notifications from Syslog Alerts. We are able to generate email notifications from Alert Checkers for the same contacts, and we are able to generate Syslog Alerts on Observium from the Syslog Rules but the associated Contacts do not receive email notifications for those Syslog Alerts. Essentially everything works except for the last step 'Generating Notifications' following the documentation: http://docs.observium.org/alerting_syslog/ We've run a Rebuild via the Web UI, have re-created the Syslog Rules and Contacts and have been through the global configuration but can't find anything obvious. Has anyone come across this problem before, or have any ideas on what would be the next step? Thanks, Shaun? ? ______________________________________________________________________ This message has been checked for all known viruses by MessageLabs Virus Scanning Service. ______________________________________________________________________

4 7

CustomOIDs to groups or alerts
by Richard Wigzell 07 Feb '18

07 Feb '18

Hello, anyone know how to add CustomOIDs to groups or alerts? [cid:image001.png@01D38DAF.6F342D40] Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

2 1

Re: [Observium] changelog of 9011 (stable)
by Mike Stupalov 06 Feb '18

06 Feb '18

Hi, Unformatted, svn log is always here: http://www.observium.org/svn.log Formatted will written later, available here: http://docs.observium.org/changelog/ > Edvinas K <mailto:edvinas.email@gmail.com> > 5 February 2018 at 11:34 > Hello, > > Where it'd be possible to see what changes was implemented in version: 9011 ? > > Thanks > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

3 2

Notifications by Contact
by Hermes J. Martinez 05 Feb '18

05 Feb '18

There is a way to make that the notifications send a user of an specific device? The idea is that the IT Manager of one office in Mazatlán only receive notifications for the device of that office and the IT Manager of Cabo receive the notifications of his devices in Cabo, is this possible? kind Regards Hermes J. Martinez Asistente De Sistemas <mailto:hermes.martinez@pueblobonito.com.mx> hermes.martinez(a)pueblobonito.com.mx (669) 989-8900 | EXT 8656 <http://www.pueblobonito.com/> www.pueblobonito.com.mx <http://www.pueblobonito.com/real-escape> Read about the Real Escape at Pueblo Bonito Connect with us <https://twitter.com/PuebloBonito> <https://plus.google.com/103008660176547960870/about> <https://www.facebook.com/PuebloBonitoResort> <https://www.instagram.com/pueblobonito/> <http://www.pueblobonito.com/blog/> Do you really need to print this e-mail? En realidad necesita imprimir este correo? Aviso Legal / Legal Notice http://img.pueblobonito.com.mx/legal

2 1

changelog of 9011 (stable)
by Edvinas K 05 Feb '18

05 Feb '18

Hello, Where it'd be possible to see what changes was implemented in version: 9011 ? Thanks

4 4

Cisco ASA IP SLA Reporting & HA Failover Alerting
by Storer, Darren 03 Feb '18

03 Feb '18

IPA SLA status is correctly reported from our core VSS switch but does not appear from ASA devices. Does anyone else see IP SLA reported from Cisco ASA firewalls? (Tried 9.7 and 9.8(2) software versions). On the subject of Cisco ASA, does anyone have HA failover correctly alerting? I've tried to implement an alert but not quite mastered the technique. [image: Inline images 1] [image: Inline images 2] Thanks in advance for any advice Darren

6 9

MIBs definitions split in r9028
by Mike Stupalov 03 Feb '18

03 Feb '18

Hi Observiumians, today I split huge hard to maintain includes/definitions/mibs.inc.php file into multiple files in includes/definitions/mibs/ sub-dirrectory. If you not have local (uncommited) changes for support some your own devices, just ignore this mail. For you nothing has changed :) If you have changes in this definition, please move it into appropriate definition file, where filename based on mib_dir (<mib_dir>.inc.php), ie for cisco: includes/definitions/mibs/cisco.inc.php Old definition content in mibs.inc.php is still left, for prevent update conflicts. But will removed after (around) r9500. So, do happy observiuming ;) -- Mike Stupalov Observium Limited, http://observium.org

1 0

device groups and permissions
by Richard Wigzell 02 Feb '18

02 Feb '18

Hello, we use device groups combined with user permissions to give various teams specific views of the estate, grouped by different sets of infrastructure - i.e. some users are allowed to see more than one group. We cannon however select the groups from the front page: [cid:image003.png@01D39C54.EB0F49F0] But get permission issue. [cid:image004.png@01D39C54.EB0F49F0] User with groups. [cid:image002.png@01D39C53.E72E34A0] We can however still see the devices in the groups and select them from in the device search page. Any help would be welcome. [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

Feature request
by Attila Nagy 02 Feb '18

02 Feb '18

Hi everyone! I've got a small (is it?!) feature request: A toggle switch "Intermittent" or "Intermittently connected" for every device to be able to select it to indicate the alerting system that it is normal for this device to go away and come back frequently, no need to issue alarms for this, but any other alarm should be run as usual. The rationale for this is we have lots of user devices (PC's, printers, what-else), these are switched on-off at users will so Observium shouldn't alert us about that (maybe the usual grey marking on the name as for ignore) but there are some parameters that are important to monitor (like hard disk usage, toner level) and which should have their alarms working. This way the currently available option "Device ignore" will not work, as it will disable the alarms altogether. Is this sane/easy enough to be included sometimes in the future? Are there already plans for this? Regards, Tylla

2 2

PRO 9023 - Sensors Question
by Serghei Golipad 02 Feb '18

02 Feb '18

Guys, I've disabled polling sensors module some time ago but had some ignored which still show up in the GUI: [cid:image001.png@01D39C05.F6D4D830] When I click to check what those are, it's an empty tab: [cid:image002.png@01D39C05.F6D4D830] Is there any way to purge all sensors which have been collected prior to module being disabled? Thank you. PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

1 0

Exports to Grafana
by Serghei Golipad 02 Feb '18

02 Feb '18

Guys, any plans to do similar to LibreNMS of exporting stats to Grafana for nice graphs? Which is the only reason why we run it in the 1st place :( PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

3 13

Graph
by Hermes J. Martinez 02 Feb '18

02 Feb '18

Hi, Does anyone know why my Observium stop generating graphics, what i think first was a trouble with the connection or the network, but them i add the Observium Server to the devices and it happens the same. Here is a Screenshot kind regards Hermes J. Martinez Asistente De Sistemas <mailto:hermes.martinez@pueblobonito.com.mx> hermes.martinez(a)pueblobonito.com.mx (669) 989-8900 | EXT 8656 <http://www.pueblobonito.com/> www.pueblobonito.com.mx <http://www.pueblobonito.com/real-escape> Read about the Real Escape at Pueblo Bonito Connect with us <https://twitter.com/PuebloBonito> <https://plus.google.com/103008660176547960870/about> <https://www.facebook.com/PuebloBonitoResort> <https://www.instagram.com/pueblobonito/> <http://www.pueblobonito.com/blog/> Do you really need to print this e-mail? En realidad necesita imprimir este correo? Aviso Legal / Legal Notice http://img.pueblobonito.com.mx/legal

6 18

Hard Disk SMART monitoring
by Attila Nagy 01 Feb '18

01 Feb '18

Hi everyone! I recently stumbled upon a blog post <http://geekness.be/observium-unix-agent-and-smart-attributes/> about making the Unix Agent deliver disk SMART values as well. The only problem is the post is from 2014 and as I saw there has been quite some changes in Observium since that time. Is there anyone who managed to make this (or any other) solution to work? Is there some plan to integrate SMART monitoring into Observium? Regards, Tylla Ps: If I remember correctly there was some discussion about this a few years back but there wasn't any final result.

5 7

Interactive (zoomable) Graphs
by Gumilar Siegfried 01 Feb '18

01 Feb '18

Hi everyone, when I am troubleshooting I often take a look at the port graphs. If I find an irregularity and want to take a closer look at it I have to fiddle around with the From and To Fields until I have the right time window. Therefore I would really like the graphs in observium to be zoomable. E.g. by dragging a rectangle or maybe something like this: https://github.com/oetiker/RrdGraphJS Are there any plans for such an improvement? Regards, Siegfried

2 1

Fortigates reporting memory in MB not in GB
by Serghei Golipad 31 Jan '18

31 Jan '18

Guys, Anyone polling FortiGates with few GB of RAM, are you seeing it reported correctly? Device with 2G RAM is showing 2MB: [cid:image001.png@01D39AB3.568B2760] Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

4 5

Re: [Observium] Fortigates reporting memory in MB not in GB
by Mike Stupalov 31 Jan '18

31 Jan '18

Hi, please attach debug for discovery: ./discovery.php -d -m mempools -h <device> > Serghei Golipad <mailto:s.golipad@uk.cdw.com> > 31 January 2018 at 19:48 > > Guys, > > Anyone polling FortiGates with few GB of RAM, are you seeing it reported correctly? Device with 2G RAM is showing 2MB: > > Cheers > > > > > PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. > > CDW Limited is a Company registered in England and Wales. > This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office > for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. > Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an > addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended > recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the > sender of its existence. > > For more information about CDW please visit www.uk.cdw.com > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

2 1

SNMP output/errors in CLI output
by Niklas Larsson 31 Jan '18

31 Jan '18

Hi, did a svn up to r9017, svn st: root@observium:/opt/observium# svn st M includes/polling/applications/asterisk.inc.php M scripts/agent-local/asterisk M scripts/observium_agent_xinetd When running from CLI I get the output below, things seams to work as they should though: root@observium:/opt/observium# php poller.php --help MIB search path: /opt/observium/mibs:/opt/observium/mibs/net-snmp Cannot find module (SNMPv2-TC): At line 10 in /opt/observium/mibs/net-snmp/UCD-DLMOD-MIB Cannot find module (SNMPv2-SMI): At line 34 in /opt/observium/mibs/net-snmp/UCD-SNMP-MIB Cannot find module (HCNUM-TC): At line 37 in /opt/observium/mibs/net-snmp/UCD-SNMP-MIB Cannot find module (SNMPv2-TC): At line 40 in /opt/observium/mibs/net-snmp/UCD-SNMP-MIB Did not find 'enterprises' in module #-1 (/opt/observium/mibs/net-snmp/UCD-SNMP-MIB) Did not find 'CounterBasedGauge64' in module #-1 (/opt/observium/mibs/net-snmp/UCD-SNMP-MIB) Did not find 'DisplayString' in module #-1 (/opt/observium/mibs/net-snmp/UCD-SNMP-MIB) Did not find 'TruthValue' in module #-1 (/opt/observium/mibs/net-snmp/UCD-SNMP-MIB) Unlinked OID in UCD-SNMP-MIB: ucdavis ::= { enterprises 2021 } Undefined identifier: enterprises near line 42 of /opt/observium/mibs/net-snmp/UCD-SNMP-MIB Did not find 'DisplayString' in module #-1 (/opt/observium/mibs/net-snmp/UCD-DLMOD-MIB) Did not find 'ucdExperimental' in module UCD-SNMP-MIB (/opt/observium/mibs/net-snmp/UCD-DLMOD-MIB) Unlinked OID in UCD-DLMOD-MIB: ucdDlmodMIB ::= { ucdExperimental 14 } Undefined identifier: ucdExperimental near line 13 of /opt/observium/mibs/net-snmp/UCD-DLMOD-MIB Cannot find module (MTA-MIB): At line 0 in (none) Cannot find module (NETWORK-SERVICES-MIB): At line 0 in (none) Cannot find module (SNMPv2-TC): At line 15 in /opt/observium/mibs/net-snmp/UCD-DISKIO-MIB Did not find 'DisplayString' in module #-1 (/opt/observium/mibs/net-snmp/UCD-DISKIO-MIB) Did not find 'ucdExperimental' in module UCD-SNMP-MIB (/opt/observium/mibs/net-snmp/UCD-DISKIO-MIB) Unlinked OID in UCD-DISKIO-MIB: ucdDiskIOMIB ::= { ucdExperimental 15 } Undefined identifier: ucdExperimental near line 19 of /opt/observium/mibs/net-snmp/UCD-DISKIO-MIB Cannot find module (SNMPv2-TC): At line 15 in /opt/observium/mibs/net-snmp/LM-SENSORS-MIB Did not find 'DisplayString' in module #-1 (/opt/observium/mibs/net-snmp/LM-SENSORS-MIB) Did not find 'ucdExperimental' in module UCD-SNMP-MIB (/opt/observium/mibs/net-snmp/LM-SENSORS-MIB) Unlinked OID in LM-SENSORS-MIB: lmSensors ::= { ucdExperimental 16 } Undefined identifier: ucdExperimental near line 32 of /opt/observium/mibs/net-snmp/LM-SENSORS-MIB Cannot find module (HOST-RESOURCES-MIB): At line 0 in (none) Cannot find module (HOST-RESOURCES-TYPES): At line 0 in (none) Cannot find module (SNMPv2-MIB): At line 0 in (none) Cannot find module (IF-MIB): At line 0 in (none) Cannot find module (IP-MIB): At line 0 in (none) Cannot find module (TCP-MIB): At line 0 in (none) Cannot find module (UDP-MIB): At line 0 in (none) Cannot find module (NOTIFICATION-LOG-MIB): At line 0 in (none) Cannot find module (DISMAN-EVENT-MIB): At line 0 in (none) Cannot find module (DISMAN-SCHEDULE-MIB): At line 0 in (none) Did not find 'ucdavis' in module UCD-SNMP-MIB (/opt/observium/mibs/net-snmp/UCD-DEMO-MIB) Unlinked OID in UCD-DEMO-MIB: ucdDemoMIB ::= { ucdavis 14 } Undefined identifier: ucdavis near line 7 of /opt/observium/mibs/net-snmp/UCD-DEMO-MIB Cannot find module (SNMP-TARGET-MIB): At line 0 in (none) Cannot find module (SNMP-FRAMEWORK-MIB): At line 9 in /opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB Cannot find module (SNMPv2-SMI): At line 8 in /opt/observium/mibs/net-snmp/NET-SNMP-MIB Did not find 'enterprises' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-MIB) Unlinked OID in NET-SNMP-MIB: netSnmp ::= { enterprises 8072 } Undefined identifier: enterprises near line 10 of /opt/observium/mibs/net-snmp/NET-SNMP-MIB Cannot find module (SNMPv2-TC): At line 21 in /opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB Did not find 'SnmpAdminString' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB) Did not find 'netSnmpObjects' in module NET-SNMP-MIB (/opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB) Did not find 'netSnmpModuleIDs' in module NET-SNMP-MIB (/opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB) Did not find 'netSnmpNotifications' in module NET-SNMP-MIB (/opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB) Did not find 'netSnmpGroups' in module NET-SNMP-MIB (/opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB) Did not find 'DisplayString' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB) Did not find 'RowStatus' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB) Did not find 'TruthValue' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB) Unlinked OID in NET-SNMP-AGENT-MIB: nsAgentNotifyGroup ::= { netSnmpGroups 9 } Undefined identifier: netSnmpGroups near line 545 of /opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB Unlinked OID in NET-SNMP-AGENT-MIB: nsTransactionGroup ::= { netSnmpGroups 8 } Undefined identifier: netSnmpGroups near line 536 of /opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB Unlinked OID in NET-SNMP-AGENT-MIB: nsConfigGroups ::= { netSnmpGroups 7 } Undefined identifier: netSnmpGroups near line 515 of /opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB Unlinked OID in NET-SNMP-AGENT-MIB: nsCacheGroup ::= { netSnmpGroups 4 } Undefined identifier: netSnmpGroups near line 505 of /opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB Unlinked OID in NET-SNMP-AGENT-MIB: nsModuleGroup ::= { netSnmpGroups 2 } Undefined identifier: netSnmpGroups near line 495 of /opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB Unlinked OID in NET-SNMP-AGENT-MIB: netSnmpAgentMIB ::= { netSnmpModuleIDs 2 } Undefined identifier: netSnmpModuleIDs near line 24 of /opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB Unlinked OID in NET-SNMP-AGENT-MIB: nsTransactions ::= { netSnmpObjects 8 } Undefined identifier: netSnmpObjects near line 55 of /opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB Unlinked OID in NET-SNMP-AGENT-MIB: nsConfiguration ::= { netSnmpObjects 7 } Undefined identifier: netSnmpObjects near line 54 of /opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB Unlinked OID in NET-SNMP-AGENT-MIB: nsErrorHistory ::= { netSnmpObjects 6 } Undefined identifier: netSnmpObjects near line 53 of /opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB Unlinked OID in NET-SNMP-AGENT-MIB: nsCache ::= { netSnmpObjects 5 } Undefined identifier: netSnmpObjects near line 52 of /opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB Unlinked OID in NET-SNMP-AGENT-MIB: nsDLMod ::= { netSnmpObjects 4 } Undefined identifier: netSnmpObjects near line 51 of /opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB Unlinked OID in NET-SNMP-AGENT-MIB: nsExtensions ::= { netSnmpObjects 3 } Undefined identifier: netSnmpObjects near line 50 of /opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB Unlinked OID in NET-SNMP-AGENT-MIB: nsMibRegistry ::= { netSnmpObjects 2 } Undefined identifier: netSnmpObjects near line 49 of /opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB Unlinked OID in NET-SNMP-AGENT-MIB: nsVersion ::= { netSnmpObjects 1 } Undefined identifier: netSnmpObjects near line 48 of /opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB Unlinked OID in NET-SNMP-AGENT-MIB: nsNotifyRestart ::= { netSnmpNotifications 3 } Undefined identifier: netSnmpNotifications near line 482 of /opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB Unlinked OID in NET-SNMP-AGENT-MIB: nsNotifyShutdown ::= { netSnmpNotifications 2 } Undefined identifier: netSnmpNotifications near line 476 of /opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB Unlinked OID in NET-SNMP-AGENT-MIB: nsNotifyStart ::= { netSnmpNotifications 1 } Undefined identifier: netSnmpNotifications near line 470 of /opt/observium/mibs/net-snmp/NET-SNMP-AGENT-MIB Cannot find module (SNMP-MPD-MIB): At line 0 in (none) Cannot find module (SNMP-USER-BASED-SM-MIB): At line 0 in (none) Cannot find module (SNMP-FRAMEWORK-MIB): At line 0 in (none) Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 0 in (none) Cannot find module (SNMP-COMMUNITY-MIB): At line 0 in (none) Cannot find module (IPV6-ICMP-MIB): At line 0 in (none) Cannot find module (IPV6-MIB): At line 0 in (none) Cannot find module (IPV6-TCP-MIB): At line 0 in (none) Cannot find module (IPV6-UDP-MIB): At line 0 in (none) Cannot find module (IP-FORWARD-MIB): At line 0 in (none) Cannot find module (SNMP-FRAMEWORK-MIB): At line 10 in /opt/observium/mibs/net-snmp/NET-SNMP-PASS-MIB Cannot find module (SNMP-FRAMEWORK-MIB): At line 10 in /opt/observium/mibs/net-snmp/NET-SNMP-EXAMPLES-MIB Cannot find module (SNMPv2-TC): At line 12 in /opt/observium/mibs/net-snmp/NET-SNMP-EXAMPLES-MIB Cannot find module (INET-ADDRESS-MIB): At line 13 in /opt/observium/mibs/net-snmp/NET-SNMP-EXAMPLES-MIB Did not find 'SnmpAdminString' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-EXAMPLES-MIB) Did not find 'netSnmp' in module NET-SNMP-MIB (/opt/observium/mibs/net-snmp/NET-SNMP-EXAMPLES-MIB) Did not find 'RowStatus' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-EXAMPLES-MIB) Did not find 'StorageType' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-EXAMPLES-MIB) Did not find 'InetAddressType' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-EXAMPLES-MIB) Did not find 'InetAddress' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-EXAMPLES-MIB) Unlinked OID in NET-SNMP-EXAMPLES-MIB: netSnmpExamples ::= { netSnmp 2 } Undefined identifier: netSnmp near line 16 of /opt/observium/mibs/net-snmp/NET-SNMP-EXAMPLES-MIB Did not find 'SnmpAdminString' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-PASS-MIB) Did not find 'netSnmpExamples' in module NET-SNMP-EXAMPLES-MIB (/opt/observium/mibs/net-snmp/NET-SNMP-PASS-MIB) Unlinked OID in NET-SNMP-PASS-MIB: netSnmpPassExamples ::= { netSnmpExamples 255 } Undefined identifier: netSnmpExamples near line 14 of /opt/observium/mibs/net-snmp/NET-SNMP-PASS-MIB Cannot find module (SNMPv2-TC): At line 16 in /opt/observium/mibs/net-snmp/NET-SNMP-EXTEND-MIB Did not find 'nsExtensions' in module NET-SNMP-AGENT-MIB (/opt/observium/mibs/net-snmp/NET-SNMP-EXTEND-MIB) Did not find 'DisplayString' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-EXTEND-MIB) Did not find 'RowStatus' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-EXTEND-MIB) Did not find 'StorageType' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-EXTEND-MIB) Unlinked OID in NET-SNMP-EXTEND-MIB: nsExtendGroups ::= { nsExtensions 3 } Undefined identifier: nsExtensions near line 39 of /opt/observium/mibs/net-snmp/NET-SNMP-EXTEND-MIB Unlinked OID in NET-SNMP-EXTEND-MIB: nsExtendObjects ::= { nsExtensions 2 } Undefined identifier: nsExtensions near line 38 of /opt/observium/mibs/net-snmp/NET-SNMP-EXTEND-MIB Unlinked OID in NET-SNMP-EXTEND-MIB: netSnmpExtendMIB ::= { nsExtensions 1 } Undefined identifier: nsExtensions near line 19 of /opt/observium/mibs/net-snmp/NET-SNMP-EXTEND-MIB Cannot find module (SNMP-NOTIFICATION-MIB): At line 0 in (none) Cannot find module (SNMPv2-TM): At line 0 in (none) Cannot find module (SNMP-FRAMEWORK-MIB): At line 9 in /opt/observium/mibs/net-snmp/NET-SNMP-VACM-MIB Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 16 in /opt/observium/mibs/net-snmp/NET-SNMP-VACM-MIB Cannot find module (SNMPv2-TC): At line 25 in /opt/observium/mibs/net-snmp/NET-SNMP-VACM-MIB Did not find 'SnmpAdminString' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-VACM-MIB) Did not find 'netSnmpObjects' in module NET-SNMP-MIB (/opt/observium/mibs/net-snmp/NET-SNMP-VACM-MIB) Did not find 'netSnmpGroups' in module NET-SNMP-MIB (/opt/observium/mibs/net-snmp/NET-SNMP-VACM-MIB) Did not find 'vacmGroupName' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-VACM-MIB) Did not find 'vacmAccessContextPrefix' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-VACM-MIB) Did not find 'vacmAccessSecurityModel' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-VACM-MIB) Did not find 'vacmAccessSecurityLevel' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-VACM-MIB) Did not find 'DisplayString' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-VACM-MIB) Did not find 'RowStatus' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-VACM-MIB) Did not find 'StorageType' in module #-1 (/opt/observium/mibs/net-snmp/NET-SNMP-VACM-MIB) Unlinked OID in NET-SNMP-VACM-MIB: netSnmpVacmMIB ::= { netSnmpObjects 9 } Undefined identifier: netSnmpObjects near line 28 of /opt/observium/mibs/net-snmp/NET-SNMP-VACM-MIB Cannot adopt OID in UCD-SNMP-MIB: logMatchRegExCompilation ::= { logMatchEntry 101 } Cannot adopt OID in UCD-SNMP-MIB: logMatchErrorFlag ::= { logMatchEntry 100 } Cannot adopt OID in UCD-SNMP-MIB: logMatchCycle ::= { logMatchEntry 11 } Cannot adopt OID in UCD-SNMP-MIB: logMatchCount ::= { logMatchEntry 10 } Cannot adopt OID in UCD-SNMP-MIB: logMatchCounter ::= { logMatchEntry 9 } Cannot adopt OID in UCD-SNMP-MIB: logMatchCurrentCount ::= { logMatchEntry 8 } Cannot adopt OID in UCD-SNMP-MIB: logMatchCurrentCounter ::= { logMatchEntry 7 } Cannot adopt OID in UCD-SNMP-MIB: logMatchGlobalCount ::= { logMatchEntry 6 } Cannot adopt OID in UCD-SNMP-MIB: logMatchGlobalCounter ::= { logMatchEntry 5 } Cannot adopt OID in UCD-SNMP-MIB: logMatchRegEx ::= { logMatchEntry 4 } Cannot adopt OID in UCD-SNMP-MIB: logMatchFilename ::= { logMatchEntry 3 } Cannot adopt OID in UCD-SNMP-MIB: logMatchName ::= { logMatchEntry 2 } Cannot adopt OID in UCD-SNMP-MIB: logMatchIndex ::= { logMatchEntry 1 } Cannot adopt OID in NET-SNMP-VACM-MIB: nsVacmAccessEntry ::= { nsVacmAccessTable 1 } Cannot adopt OID in UCD-SNMP-MIB: extErrFixCmd ::= { extEntry 103 } Cannot adopt OID in UCD-SNMP-MIB: extErrFix ::= { extEntry 102 } Cannot adopt OID in UCD-SNMP-MIB: extOutput ::= { extEntry 101 } Cannot adopt OID in UCD-SNMP-MIB: extResult ::= { extEntry 100 } Cannot adopt OID in UCD-SNMP-MIB: extCommand ::= { extEntry 3 } Cannot adopt OID in UCD-SNMP-MIB: extNames ::= { extEntry 2 } Cannot adopt OID in UCD-SNMP-MIB: extIndex ::= { extEntry 1 } Cannot adopt OID in UCD-DEMO-MIB: ucdDemoPublic ::= { ucdDemoMIBObjects 1 } Cannot adopt OID in UCD-DLMOD-MIB: dlmodTable ::= { ucdDlmodMIB 2 } Cannot adopt OID in UCD-DLMOD-MIB: dlmodNextIndex ::= { ucdDlmodMIB 1 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpExamples ::= { netSnmp 2 } Cannot adopt OID in NET-SNMP-MIB: netSnmpConformance ::= { netSnmp 5 } Cannot adopt OID in NET-SNMP-MIB: netSnmpNotificationPrefix ::= { netSnmp 4 } Cannot adopt OID in NET-SNMP-MIB: netSnmpExperimental ::= { netSnmp 9999 } Cannot adopt OID in NET-SNMP-MIB: netSnmpEnumerations ::= { netSnmp 3 } Cannot adopt OID in NET-SNMP-MIB: netSnmpObjects ::= { netSnmp 1 } Cannot adopt OID in UCD-SNMP-MIB: versionDoDebugging ::= { version 20 } Cannot adopt OID in UCD-SNMP-MIB: versionSavePersistentData ::= { version 13 } Cannot adopt OID in UCD-SNMP-MIB: versionRestartAgent ::= { version 12 } Cannot adopt OID in UCD-SNMP-MIB: versionUpdateConfig ::= { version 11 } Cannot adopt OID in UCD-SNMP-MIB: versionClearCache ::= { version 10 } Cannot adopt OID in UCD-SNMP-MIB: versionConfigureOptions ::= { version 6 } Cannot adopt OID in UCD-SNMP-MIB: versionIdent ::= { version 5 } Cannot adopt OID in UCD-SNMP-MIB: versionCDate ::= { version 4 } Cannot adopt OID in UCD-SNMP-MIB: versionDate ::= { version 3 } Cannot adopt OID in UCD-SNMP-MIB: versionTag ::= { version 2 } Cannot adopt OID in UCD-SNMP-MIB: versionIndex ::= { version 1 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpExampleHeartbeatNotification ::= { netSnmpExampleNotificationPrefix 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsCacheStatus ::= { nsCacheEntry 3 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsCacheTimeout ::= { nsCacheEntry 2 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsCachedOID ::= { nsCacheEntry 1 } Cannot adopt OID in UCD-SNMP-MIB: unknown ::= { ucdSnmpAgent 255 } Cannot adopt OID in UCD-SNMP-MIB: dragonfly ::= { ucdSnmpAgent 17 } Cannot adopt OID in UCD-SNMP-MIB: macosx ::= { ucdSnmpAgent 16 } Cannot adopt OID in UCD-SNMP-MIB: aix ::= { ucdSnmpAgent 15 } Cannot adopt OID in UCD-SNMP-MIB: hpux11 ::= { ucdSnmpAgent 14 } Cannot adopt OID in UCD-SNMP-MIB: win32 ::= { ucdSnmpAgent 13 } Cannot adopt OID in UCD-SNMP-MIB: openbsd ::= { ucdSnmpAgent 12 } Cannot adopt OID in UCD-SNMP-MIB: bsdi ::= { ucdSnmpAgent 11 } Cannot adopt OID in UCD-SNMP-MIB: linux ::= { ucdSnmpAgent 10 } Cannot adopt OID in UCD-SNMP-MIB: irix ::= { ucdSnmpAgent 9 } Cannot adopt OID in UCD-SNMP-MIB: freebsd ::= { ucdSnmpAgent 8 } Cannot adopt OID in UCD-SNMP-MIB: netbsd1 ::= { ucdSnmpAgent 7 } Cannot adopt OID in UCD-SNMP-MIB: hpux10 ::= { ucdSnmpAgent 6 } Cannot adopt OID in UCD-SNMP-MIB: ultrix ::= { ucdSnmpAgent 5 } Cannot adopt OID in UCD-SNMP-MIB: osf ::= { ucdSnmpAgent 4 } Cannot adopt OID in UCD-SNMP-MIB: solaris ::= { ucdSnmpAgent 3 } Cannot adopt OID in UCD-SNMP-MIB: sunos4 ::= { ucdSnmpAgent 2 } Cannot adopt OID in UCD-SNMP-MIB: hpux9 ::= { ucdSnmpAgent 1 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendOutputGroup ::= { nsExtendGroups 2 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendConfigGroup ::= { nsExtendGroups 1 } Cannot adopt OID in UCD-DISKIO-MIB: diskIOEntry ::= { diskIOTable 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsTransactionEntry ::= { nsTransactionTable 1 } Cannot adopt OID in NET-SNMP-MIB: netSnmpGroups ::= { netSnmpConformance 2 } Cannot adopt OID in NET-SNMP-MIB: netSnmpCompliances ::= { netSnmpConformance 1 } Cannot adopt OID in UCD-SNMP-MIB: mrModuleName ::= { mrEntry 2 } Cannot adopt OID in UCD-SNMP-MIB: mrIndex ::= { mrEntry 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsDebugTokenEntry ::= { nsDebugTokenTable 1 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendStatus ::= { nsExtendConfigEntry 21 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendStorage ::= { nsExtendConfigEntry 20 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendRunType ::= { nsExtendConfigEntry 7 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendExecType ::= { nsExtendConfigEntry 6 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendCacheTime ::= { nsExtendConfigEntry 5 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendInput ::= { nsExtendConfigEntry 4 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendArgs ::= { nsExtendConfigEntry 3 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendCommand ::= { nsExtendConfigEntry 2 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendToken ::= { nsExtendConfigEntry 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsModuleTable ::= { nsMibRegistry 1 } Cannot adopt OID in NET-SNMP-MIB: netSnmpPlaypen ::= { netSnmpExperimental 9999 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpIETFWGEntry ::= { netSnmpIETFWGTable 1 } Cannot adopt OID in UCD-SNMP-MIB: prErrFixCmd ::= { prEntry 103 } Cannot adopt OID in UCD-SNMP-MIB: prErrFix ::= { prEntry 102 } Cannot adopt OID in UCD-SNMP-MIB: prErrMessage ::= { prEntry 101 } Cannot adopt OID in UCD-SNMP-MIB: prErrorFlag ::= { prEntry 100 } Cannot adopt OID in UCD-SNMP-MIB: prCount ::= { prEntry 5 } Cannot adopt OID in UCD-SNMP-MIB: prMax ::= { prEntry 4 } Cannot adopt OID in UCD-SNMP-MIB: prMin ::= { prEntry 3 } Cannot adopt OID in UCD-SNMP-MIB: prNames ::= { prEntry 2 } Cannot adopt OID in UCD-SNMP-MIB: prIndex ::= { prEntry 1 } Cannot adopt OID in UCD-DLMOD-MIB: dlmodEntry ::= { dlmodTable 1 } Cannot adopt OID in UCD-SNMP-MIB: memSwapErrorMsg ::= { memory 101 } Cannot adopt OID in UCD-SNMP-MIB: memSwapError ::= { memory 100 } Cannot adopt OID in UCD-SNMP-MIB: memCachedX ::= { memory 26 } Cannot adopt OID in UCD-SNMP-MIB: memBufferX ::= { memory 25 } Cannot adopt OID in UCD-SNMP-MIB: memSharedX ::= { memory 24 } Cannot adopt OID in UCD-SNMP-MIB: memMinimumSwapX ::= { memory 23 } Cannot adopt OID in UCD-SNMP-MIB: memTotalFreeX ::= { memory 22 } Cannot adopt OID in UCD-SNMP-MIB: memAvailRealX ::= { memory 21 } Cannot adopt OID in UCD-SNMP-MIB: memTotalRealX ::= { memory 20 } Cannot adopt OID in UCD-SNMP-MIB: memAvailSwapX ::= { memory 19 } Cannot adopt OID in UCD-SNMP-MIB: memTotalSwapX ::= { memory 18 } Cannot adopt OID in UCD-SNMP-MIB: memUsedRealTXT ::= { memory 17 } Cannot adopt OID in UCD-SNMP-MIB: memUsedSwapTXT ::= { memory 16 } Cannot adopt OID in UCD-SNMP-MIB: memCached ::= { memory 15 } Cannot adopt OID in UCD-SNMP-MIB: memBuffer ::= { memory 14 } Cannot adopt OID in UCD-SNMP-MIB: memShared ::= { memory 13 } Cannot adopt OID in UCD-SNMP-MIB: memMinimumSwap ::= { memory 12 } Cannot adopt OID in UCD-SNMP-MIB: memTotalFree ::= { memory 11 } Cannot adopt OID in UCD-SNMP-MIB: memAvailRealTXT ::= { memory 10 } Cannot adopt OID in UCD-SNMP-MIB: memTotalRealTXT ::= { memory 9 } Cannot adopt OID in UCD-SNMP-MIB: memAvailSwapTXT ::= { memory 8 } Cannot adopt OID in UCD-SNMP-MIB: memTotalSwapTXT ::= { memory 7 } Cannot adopt OID in UCD-SNMP-MIB: memAvailReal ::= { memory 6 } Cannot adopt OID in UCD-SNMP-MIB: memTotalReal ::= { memory 5 } Cannot adopt OID in UCD-SNMP-MIB: memAvailSwap ::= { memory 4 } Cannot adopt OID in UCD-SNMP-MIB: memTotalSwap ::= { memory 3 } Cannot adopt OID in UCD-SNMP-MIB: memErrorName ::= { memory 2 } Cannot adopt OID in UCD-SNMP-MIB: memIndex ::= { memory 1 } Cannot adopt OID in UCD-DEMO-MIB: ucdDemoMIBObjects ::= { ucdDemoMIB 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsModuleTimeout ::= { nsModuleEntry 6 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsModuleModes ::= { nsModuleEntry 5 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsModuleName ::= { nsModuleEntry 4 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsmRegistrationPriority ::= { nsModuleEntry 3 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsmRegistrationPoint ::= { nsModuleEntry 2 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsmContextName ::= { nsModuleEntry 1 } Cannot adopt OID in LM-SENSORS-MIB: lmMiscSensorsEntry ::= { lmMiscSensorsTable 1 } Cannot adopt OID in NET-SNMP-MIB: netSnmpNotificationObjects ::= { netSnmpNotificationPrefix 1 } Cannot adopt OID in NET-SNMP-MIB: netSnmpNotifications ::= { netSnmpNotificationPrefix 0 } Cannot adopt OID in NET-SNMP-PASS-MIB: netSnmpPassTable ::= { netSnmpPassExamples 2 } Cannot adopt OID in NET-SNMP-PASS-MIB: netSnmpPassOIDValue ::= { netSnmpPassExamples 99 } Cannot adopt OID in NET-SNMP-PASS-MIB: netSnmpPassInteger64 ::= { netSnmpPassExamples 8 } Cannot adopt OID in NET-SNMP-PASS-MIB: netSnmpPassCounter64 ::= { netSnmpPassExamples 7 } Cannot adopt OID in NET-SNMP-PASS-MIB: netSnmpPassGauge ::= { netSnmpPassExamples 6 } Cannot adopt OID in NET-SNMP-PASS-MIB: netSnmpPassCounter ::= { netSnmpPassExamples 5 } Cannot adopt OID in NET-SNMP-PASS-MIB: netSnmpPassIpAddress ::= { netSnmpPassExamples 4 } Cannot adopt OID in NET-SNMP-PASS-MIB: netSnmpPassTimeTicks ::= { netSnmpPassExamples 3 } Cannot adopt OID in NET-SNMP-PASS-MIB: netSnmpPassString ::= { netSnmpPassExamples 1 } Cannot adopt OID in NET-SNMP-MIB: netSnmpDomains ::= { netSnmpEnumerations 3 } Cannot adopt OID in NET-SNMP-MIB: netSnmpAgentOIDs ::= { netSnmpEnumerations 2 } Cannot adopt OID in NET-SNMP-MIB: netSnmpModuleIDs ::= { netSnmpEnumerations 1 } Cannot adopt OID in LM-SENSORS-MIB: lmFanSensorsEntry ::= { lmFanSensorsTable 1 } Cannot adopt OID in LM-SENSORS-MIB: lmTempSensorsEntry ::= { lmTempSensorsTable 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsModuleGroup ::= { netSnmpGroups 2 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsCacheGroup ::= { netSnmpGroups 4 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsConfigGroups ::= { netSnmpGroups 7 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsTransactionGroup ::= { netSnmpGroups 8 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsAgentNotifyGroup ::= { netSnmpGroups 9 } Cannot adopt OID in UCD-SNMP-MIB: fileEntry ::= { fileTable 1 } Cannot adopt OID in NET-SNMP-VACM-MIB: nsVacmStatus ::= { nsVacmAccessEntry 5 } Cannot adopt OID in NET-SNMP-VACM-MIB: nsVacmStorageType ::= { nsVacmAccessEntry 4 } Cannot adopt OID in NET-SNMP-VACM-MIB: nsVacmViewName ::= { nsVacmAccessEntry 3 } Cannot adopt OID in NET-SNMP-VACM-MIB: nsVacmContextMatch ::= { nsVacmAccessEntry 2 } Cannot adopt OID in NET-SNMP-VACM-MIB: nsVacmAuthType ::= { nsVacmAccessEntry 1 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: netSnmpExtendMIB ::= { nsExtensions 1 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendObjects ::= { nsExtensions 2 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendGroups ::= { nsExtensions 3 } Cannot adopt OID in LM-SENSORS-MIB: lmVoltSensorsEntry ::= { lmVoltSensorsTable 1 } Cannot adopt OID in NET-SNMP-MIB: netSnmp ::= { enterprises 8072 } Cannot adopt OID in UCD-SNMP-MIB: ucdavis ::= { enterprises 2021 } Cannot adopt OID in UCD-DISKIO-MIB: diskIOBusyTime ::= { diskIOEntry 14 } Cannot adopt OID in UCD-DISKIO-MIB: diskIONWrittenX ::= { diskIOEntry 13 } Cannot adopt OID in UCD-DISKIO-MIB: diskIONReadX ::= { diskIOEntry 12 } Cannot adopt OID in UCD-DISKIO-MIB: diskIOLA15 ::= { diskIOEntry 11 } Cannot adopt OID in UCD-DISKIO-MIB: diskIOLA5 ::= { diskIOEntry 10 } Cannot adopt OID in UCD-DISKIO-MIB: diskIOLA1 ::= { diskIOEntry 9 } Cannot adopt OID in UCD-DISKIO-MIB: diskIOWrites ::= { diskIOEntry 6 } Cannot adopt OID in UCD-DISKIO-MIB: diskIOReads ::= { diskIOEntry 5 } Cannot adopt OID in UCD-DISKIO-MIB: diskIONWritten ::= { diskIOEntry 4 } Cannot adopt OID in UCD-DISKIO-MIB: diskIONRead ::= { diskIOEntry 3 } Cannot adopt OID in UCD-DISKIO-MIB: diskIODevice ::= { diskIOEntry 2 } Cannot adopt OID in UCD-DISKIO-MIB: diskIOIndex ::= { diskIOEntry 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsTransactionMode ::= { nsTransactionEntry 2 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsTransactionID ::= { nsTransactionEntry 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsDebugTokenStatus ::= { nsDebugTokenEntry 4 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsDebugTokenPrefix ::= { nsDebugTokenEntry 2 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: nsIETFWGChair2 ::= { netSnmpIETFWGEntry 3 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: nsIETFWGChair1 ::= { netSnmpIETFWGEntry 2 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: nsIETFWGName ::= { netSnmpIETFWGEntry 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsLoggingTable ::= { nsConfigLogging 1 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpHostsEntry ::= { netSnmpHostsTable 1 } Cannot adopt OID in UCD-DLMOD-MIB: dlmodStatus ::= { dlmodEntry 5 } Cannot adopt OID in UCD-DLMOD-MIB: dlmodError ::= { dlmodEntry 4 } Cannot adopt OID in UCD-DLMOD-MIB: dlmodPath ::= { dlmodEntry 3 } Cannot adopt OID in UCD-DLMOD-MIB: dlmodName ::= { dlmodEntry 2 } Cannot adopt OID in UCD-DLMOD-MIB: dlmodIndex ::= { dlmodEntry 1 } Cannot adopt OID in LM-SENSORS-MIB: lmMiscSensorsValue ::= { lmMiscSensorsEntry 3 } Cannot adopt OID in LM-SENSORS-MIB: lmMiscSensorsDevice ::= { lmMiscSensorsEntry 2 } Cannot adopt OID in LM-SENSORS-MIB: lmMiscSensorsIndex ::= { lmMiscSensorsEntry 1 } Cannot adopt OID in NET-SNMP-PASS-MIB: netSnmpPassEntry ::= { netSnmpPassTable 1 } Cannot adopt OID in LM-SENSORS-MIB: lmSensors ::= { ucdExperimental 16 } Cannot adopt OID in UCD-DISKIO-MIB: ucdDiskIOMIB ::= { ucdExperimental 15 } Cannot adopt OID in UCD-DLMOD-MIB: ucdDlmodMIB ::= { ucdExperimental 14 } Cannot adopt OID in UCD-SNMP-MIB: dskEntry ::= { dskTable 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: netSnmpAgentMIB ::= { netSnmpModuleIDs 2 } Cannot adopt OID in LM-SENSORS-MIB: lmFanSensorsValue ::= { lmFanSensorsEntry 3 } Cannot adopt OID in LM-SENSORS-MIB: lmFanSensorsDevice ::= { lmFanSensorsEntry 2 } Cannot adopt OID in LM-SENSORS-MIB: lmFanSensorsIndex ::= { lmFanSensorsEntry 1 } Cannot adopt OID in LM-SENSORS-MIB: lmTempSensorsValue ::= { lmTempSensorsEntry 3 } Cannot adopt OID in LM-SENSORS-MIB: lmTempSensorsDevice ::= { lmTempSensorsEntry 2 } Cannot adopt OID in LM-SENSORS-MIB: lmTempSensorsIndex ::= { lmTempSensorsEntry 1 } Cannot adopt OID in UCD-SNMP-MIB: logMatchTable ::= { logMatch 2 } Cannot adopt OID in UCD-SNMP-MIB: logMatchMaxEntries ::= { logMatch 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsLoggingEntry ::= { nsLoggingTable 1 } Cannot adopt OID in UCD-SNMP-MIB: fileErrorMsg ::= { fileEntry 101 } Cannot adopt OID in UCD-SNMP-MIB: fileErrorFlag ::= { fileEntry 100 } Cannot adopt OID in UCD-SNMP-MIB: fileMax ::= { fileEntry 4 } Cannot adopt OID in UCD-SNMP-MIB: fileSize ::= { fileEntry 3 } Cannot adopt OID in UCD-SNMP-MIB: fileName ::= { fileEntry 2 } Cannot adopt OID in UCD-SNMP-MIB: fileIndex ::= { fileEntry 1 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendOutput2Table ::= { nsExtendObjects 4 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendOutput1Table ::= { nsExtendObjects 3 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendConfigTable ::= { nsExtendObjects 2 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendNumEntries ::= { nsExtendObjects 1 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendOutput1Entry ::= { nsExtendOutput1Table 1 } Cannot adopt OID in UCD-SNMP-MIB: ssCpuNumCpus ::= { systemStats 67 } Cannot adopt OID in UCD-SNMP-MIB: ssCpuRawGuestNice ::= { systemStats 66 } Cannot adopt OID in UCD-SNMP-MIB: ssCpuRawGuest ::= { systemStats 65 } Cannot adopt OID in UCD-SNMP-MIB: ssCpuRawSteal ::= { systemStats 64 } Cannot adopt OID in UCD-SNMP-MIB: ssRawSwapOut ::= { systemStats 63 } Cannot adopt OID in UCD-SNMP-MIB: ssRawSwapIn ::= { systemStats 62 } Cannot adopt OID in UCD-SNMP-MIB: ssCpuRawSoftIRQ ::= { systemStats 61 } Cannot adopt OID in UCD-SNMP-MIB: ssRawContexts ::= { systemStats 60 } Cannot adopt OID in UCD-SNMP-MIB: ssRawInterrupts ::= { systemStats 59 } Cannot adopt OID in UCD-SNMP-MIB: ssIORawReceived ::= { systemStats 58 } Cannot adopt OID in UCD-SNMP-MIB: ssIORawSent ::= { systemStats 57 } Cannot adopt OID in UCD-SNMP-MIB: ssCpuRawInterrupt ::= { systemStats 56 } Cannot adopt OID in UCD-SNMP-MIB: ssCpuRawKernel ::= { systemStats 55 } Cannot adopt OID in UCD-SNMP-MIB: ssCpuRawWait ::= { systemStats 54 } Cannot adopt OID in UCD-SNMP-MIB: ssCpuRawIdle ::= { systemStats 53 } Cannot adopt OID in UCD-SNMP-MIB: ssCpuRawSystem ::= { systemStats 52 } Cannot adopt OID in UCD-SNMP-MIB: ssCpuRawNice ::= { systemStats 51 } Cannot adopt OID in UCD-SNMP-MIB: ssCpuRawUser ::= { systemStats 50 } Cannot adopt OID in UCD-SNMP-MIB: ssCpuIdle ::= { systemStats 11 } Cannot adopt OID in UCD-SNMP-MIB: ssCpuSystem ::= { systemStats 10 } Cannot adopt OID in UCD-SNMP-MIB: ssCpuUser ::= { systemStats 9 } Cannot adopt OID in UCD-SNMP-MIB: ssSysContext ::= { systemStats 8 } Cannot adopt OID in UCD-SNMP-MIB: ssSysInterrupts ::= { systemStats 7 } Cannot adopt OID in UCD-SNMP-MIB: ssIOReceive ::= { systemStats 6 } Cannot adopt OID in UCD-SNMP-MIB: ssIOSent ::= { systemStats 5 } Cannot adopt OID in UCD-SNMP-MIB: ssSwapOut ::= { systemStats 4 } Cannot adopt OID in UCD-SNMP-MIB: ssSwapIn ::= { systemStats 3 } Cannot adopt OID in UCD-SNMP-MIB: ssErrorName ::= { systemStats 2 } Cannot adopt OID in UCD-SNMP-MIB: ssIndex ::= { systemStats 1 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendOutput2Entry ::= { nsExtendOutput2Table 1 } Cannot adopt OID in UCD-SNMP-MIB: laEntry ::= { laTable 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsCacheTable ::= { nsCache 3 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsCacheEnabled ::= { nsCache 2 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsCacheDefaultTimeout ::= { nsCache 1 } Cannot adopt OID in UCD-SNMP-MIB: logMatchEntry ::= { logMatchTable 1 } Cannot adopt OID in UCD-SNMP-MIB: extEntry ::= { extTable 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsConfigLogging ::= { nsConfiguration 2 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsConfigDebug ::= { nsConfiguration 1 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpExampleString ::= { netSnmpExampleScalars 3 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpExampleSleeper ::= { netSnmpExampleScalars 2 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpExampleInteger ::= { netSnmpExampleScalars 1 } Cannot adopt OID in LM-SENSORS-MIB: lmVoltSensorsValue ::= { lmVoltSensorsEntry 3 } Cannot adopt OID in LM-SENSORS-MIB: lmVoltSensorsDevice ::= { lmVoltSensorsEntry 2 } Cannot adopt OID in LM-SENSORS-MIB: lmVoltSensorsIndex ::= { lmVoltSensorsEntry 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsCacheEntry ::= { nsCacheTable 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsDebugTokenTable ::= { nsConfigDebug 4 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsDebugDumpPdu ::= { nsConfigDebug 3 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsDebugOutputAll ::= { nsConfigDebug 2 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsDebugEnabled ::= { nsConfigDebug 1 } Cannot adopt OID in UCD-DEMO-MIB: ucdDemoPassphrase ::= { ucdDemoPublic 4 } Cannot adopt OID in UCD-DEMO-MIB: ucdDemoUserList ::= { ucdDemoPublic 3 } Cannot adopt OID in UCD-DEMO-MIB: ucdDemoPublicString ::= { ucdDemoPublic 2 } Cannot adopt OID in UCD-DEMO-MIB: ucdDemoResetKeys ::= { ucdDemoPublic 1 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpExampleHeartbeatName ::= { netSnmpExampleNotificationObjects 2 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpExampleHeartbeatRate ::= { netSnmpExampleNotificationObjects 1 } Cannot adopt OID in NET-SNMP-PASS-MIB: netSnmpPassExamples ::= { netSnmpExamples 255 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpExampleNotifications ::= { netSnmpExamples 3 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpExampleTables ::= { netSnmpExamples 2 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpExampleScalars ::= { netSnmpExamples 1 } Cannot adopt OID in NET-SNMP-VACM-MIB: nsVacmAccessTable ::= { netSnmpVacmMIB 1 } Cannot adopt OID in UCD-SNMP-MIB: ucdShutdown ::= { ucdTraps 2 } Cannot adopt OID in UCD-SNMP-MIB: ucdStart ::= { ucdTraps 1 } Cannot adopt OID in LM-SENSORS-MIB: lmMiscSensorsTable ::= { lmSensors 5 } Cannot adopt OID in LM-SENSORS-MIB: lmVoltSensorsTable ::= { lmSensors 4 } Cannot adopt OID in LM-SENSORS-MIB: lmFanSensorsTable ::= { lmSensors 3 } Cannot adopt OID in LM-SENSORS-MIB: lmTempSensorsTable ::= { lmSensors 2 } Cannot adopt OID in LM-SENSORS-MIB: lmSensorsMIB ::= { lmSensors 1 } Cannot adopt OID in UCD-SNMP-MIB: mrEntry ::= { mrTable 1 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendConfigEntry ::= { nsExtendConfigTable 1 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpHostRowStatus ::= { netSnmpHostsEntry 5 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpHostStorage ::= { netSnmpHostsEntry 4 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpHostAddress ::= { netSnmpHostsEntry 3 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpHostAddressType ::= { netSnmpHostsEntry 2 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpHostName ::= { netSnmpHostsEntry 1 } Cannot adopt OID in UCD-SNMP-MIB: prEntry ::= { prTable 1 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpExampleNotification ::= { netSnmpExampleNotifications 1 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpExampleNotificationObjects ::= { netSnmpExampleNotifications 2 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpExampleNotificationPrefix ::= { netSnmpExampleNotifications 0 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpHostsTable ::= { netSnmpExampleTables 2 } Cannot adopt OID in NET-SNMP-EXAMPLES-MIB: netSnmpIETFWGTable ::= { netSnmpExampleTables 1 } Cannot adopt OID in NET-SNMP-PASS-MIB: netSnmpPassOID ::= { netSnmpPassEntry 3 } Cannot adopt OID in NET-SNMP-PASS-MIB: netSnmpPassInteger ::= { netSnmpPassEntry 2 } Cannot adopt OID in NET-SNMP-PASS-MIB: netSnmpPassIndex ::= { netSnmpPassEntry 1 } Cannot adopt OID in NET-SNMP-VACM-MIB: netSnmpVacmMIB ::= { netSnmpObjects 9 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsVersion ::= { netSnmpObjects 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsMibRegistry ::= { netSnmpObjects 2 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsExtensions ::= { netSnmpObjects 3 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsDLMod ::= { netSnmpObjects 4 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsCache ::= { netSnmpObjects 5 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsErrorHistory ::= { netSnmpObjects 6 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsConfiguration ::= { netSnmpObjects 7 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsTransactions ::= { netSnmpObjects 8 } Cannot adopt OID in UCD-DEMO-MIB: ucdDemoMIB ::= { ucdavis 14 } Cannot adopt OID in UCD-SNMP-MIB: logMatch ::= { ucdavis 16 } Cannot adopt OID in UCD-SNMP-MIB: fileTable ::= { ucdavis 15 } Cannot adopt OID in UCD-SNMP-MIB: ucdTraps ::= { ucdavis 251 } Cannot adopt OID in UCD-SNMP-MIB: systemStats ::= { ucdavis 11 } Cannot adopt OID in UCD-SNMP-MIB: mrTable ::= { ucdavis 102 } Cannot adopt OID in UCD-SNMP-MIB: snmperrs ::= { ucdavis 101 } Cannot adopt OID in UCD-SNMP-MIB: version ::= { ucdavis 100 } Cannot adopt OID in UCD-SNMP-MIB: laTable ::= { ucdavis 10 } Cannot adopt OID in UCD-SNMP-MIB: dskTable ::= { ucdavis 9 } Cannot adopt OID in UCD-SNMP-MIB: memory ::= { ucdavis 4 } Cannot adopt OID in UCD-SNMP-MIB: extTable ::= { ucdavis 8 } Cannot adopt OID in UCD-SNMP-MIB: prTable ::= { ucdavis 2 } Cannot adopt OID in UCD-SNMP-MIB: ucdSnmpAgent ::= { ucdavis 250 } Cannot adopt OID in UCD-SNMP-MIB: ucdExperimental ::= { ucdavis 13 } Cannot adopt OID in UCD-SNMP-MIB: ucdInternal ::= { ucdavis 12 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsModuleEntry ::= { nsModuleTable 1 } Cannot adopt OID in UCD-SNMP-MIB: dskErrorMsg ::= { dskEntry 101 } Cannot adopt OID in UCD-SNMP-MIB: dskErrorFlag ::= { dskEntry 100 } Cannot adopt OID in UCD-SNMP-MIB: dskUsedHigh ::= { dskEntry 16 } Cannot adopt OID in UCD-SNMP-MIB: dskUsedLow ::= { dskEntry 15 } Cannot adopt OID in UCD-SNMP-MIB: dskAvailHigh ::= { dskEntry 14 } Cannot adopt OID in UCD-SNMP-MIB: dskAvailLow ::= { dskEntry 13 } Cannot adopt OID in UCD-SNMP-MIB: dskTotalHigh ::= { dskEntry 12 } Cannot adopt OID in UCD-SNMP-MIB: dskTotalLow ::= { dskEntry 11 } Cannot adopt OID in UCD-SNMP-MIB: dskPercentNode ::= { dskEntry 10 } Cannot adopt OID in UCD-SNMP-MIB: dskPercent ::= { dskEntry 9 } Cannot adopt OID in UCD-SNMP-MIB: dskUsed ::= { dskEntry 8 } Cannot adopt OID in UCD-SNMP-MIB: dskAvail ::= { dskEntry 7 } Cannot adopt OID in UCD-SNMP-MIB: dskTotal ::= { dskEntry 6 } Cannot adopt OID in UCD-SNMP-MIB: dskMinPercent ::= { dskEntry 5 } Cannot adopt OID in UCD-SNMP-MIB: dskMinimum ::= { dskEntry 4 } Cannot adopt OID in UCD-SNMP-MIB: dskDevice ::= { dskEntry 3 } Cannot adopt OID in UCD-SNMP-MIB: dskPath ::= { dskEntry 2 } Cannot adopt OID in UCD-SNMP-MIB: dskIndex ::= { dskEntry 1 } Cannot adopt OID in UCD-DISKIO-MIB: diskIOTable ::= { ucdDiskIOMIB 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsLoggingGroup ::= { nsConfigGroups 2 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsDebugGroup ::= { nsConfigGroups 1 } Cannot adopt OID in UCD-SNMP-MIB: snmperrErrMessage ::= { snmperrs 101 } Cannot adopt OID in UCD-SNMP-MIB: snmperrErrorFlag ::= { snmperrs 100 } Cannot adopt OID in UCD-SNMP-MIB: snmperrNames ::= { snmperrs 2 } Cannot adopt OID in UCD-SNMP-MIB: snmperrIndex ::= { snmperrs 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsTransactionTable ::= { nsTransactions 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsLogStatus ::= { nsLoggingEntry 5 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsLogMaxLevel ::= { nsLoggingEntry 4 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsLogType ::= { nsLoggingEntry 3 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsLogToken ::= { nsLoggingEntry 2 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsLogLevel ::= { nsLoggingEntry 1 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendResult ::= { nsExtendOutput1Entry 4 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendOutNumLines ::= { nsExtendOutput1Entry 3 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendOutputFull ::= { nsExtendOutput1Entry 2 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendOutput1Line ::= { nsExtendOutput1Entry 1 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendOutLine ::= { nsExtendOutput2Entry 2 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendLineIndex ::= { nsExtendOutput2Entry 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsNotifyStart ::= { netSnmpNotifications 1 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsNotifyShutdown ::= { netSnmpNotifications 2 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsNotifyRestart ::= { netSnmpNotifications 3 } Cannot adopt OID in UCD-SNMP-MIB: laErrMessage ::= { laEntry 101 } Cannot adopt OID in UCD-SNMP-MIB: laErrorFlag ::= { laEntry 100 } Cannot adopt OID in UCD-SNMP-MIB: laLoadFloat ::= { laEntry 6 } Cannot adopt OID in UCD-SNMP-MIB: laLoadInt ::= { laEntry 5 } Cannot adopt OID in UCD-SNMP-MIB: laConfig ::= { laEntry 4 } Cannot adopt OID in UCD-SNMP-MIB: laLoad ::= { laEntry 3 } Cannot adopt OID in UCD-SNMP-MIB: laNames ::= { laEntry 2 } Cannot adopt OID in UCD-SNMP-MIB: laIndex ::= { laEntry 1 } ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 18.1.9017 http://www.observium.org USAGE: poller.php [-drqV] [-i instances] [-n number] [-m module] [-h device] EXAMPLE: -h <device id> | <device hostname wildcard> Poll single device -h odd Poll odd numbered devices (same as -i 2 -n 0) -h even Poll even numbered devices (same as -i 2 -n 1) -h all Poll all devices -h new Poll all devices that have not had a discovery run before -i <instances> -n <id/number> Poll as instance <id/number> of <instances> Instance numbers start at 0. 0-3 for -i 4 Example: -i 4 -n 0 -i 4 -n 1 -i 4 -n 2 -i 4 -n 3 OPTIONS: -h Device hostname, id or key odd/even/all/new. -i Poll instances count. -n Instance id (number), must start from 0 and to be less than instances count. -q Quiet output. -M Show globally enabled/disabled modules and exit. -V Show version and exit. DEBUGGING OPTIONS: -r Do not create or update RRDs -d Enable debugging output. -dd More verbose debugging output. -m Specify module(s) (separated by commas) to be run. Invalid arguments!

5 11

Log full of Interface Speed change messages for Fortigate 600D cluster
by Scott Benninger 31 Jan '18

31 Jan '18

The event log for our FGT600D is full of many thousands of messages like below. All the same speeds etc but for each port over and over. I have several FGT60E's as well on the same level of OS but they do not have the same events. The 600D is in a A/P cluster. Not sure what I need to do to prevent the messages? Any suggestions? Hardware FortiGate 600D Operating system Fortinet Fortigate v5.6.3 (build1547) OB version 17.6.8672 2018-01-31 08:59:35 port18 Interface changed: [ifHighSpeed] '2147483647' -> '4294901759' 2018-01-31 08:59:35 port17 Interface changed: [ifHighSpeed] '2147483647' -> '4294901759' 2018-01-31 08:59:35 port14 Interface changed: [ifHighSpeed] '2147483647' -> '4294901759' 2018-01-31 08:59:35 port13 Interface changed: [ifHighSpeed] '2147483647' -> '4294901759' 2018-01-31 08:59:35 port12 Interface changed: [ifHighSpeed] '2147483647' -> '4294901759' 2018-01-31 08:59:35 port11 Interface changed: [ifHighSpeed] '2147483647' -> '4294901759' 2018-01-31 08:59:35 port10 Interface changed: [ifHighSpeed] '2147483647' -> '4294901759' Thanks! Scott

4 5

Device randomly now taking longer to poll
by Simon Mousey Smith 31 Jan '18

31 Jan '18

Hi All Im trying to work out why 1 of our switches has all of a sudden decided to now take 28s to poll, even tho using it for months its only taken 9s? From the 'tab=perf' of the device, its showing ‘ports’,’fdb-table’,’netstats’,’ospf’ are showng as really high, 9sec each really? I have restarted the equipment incase it was maybe that, same issue Ive upgraded to the latest firmware too but still the same issue? Any other ideas where I can look? Output of /opt/observium/poller.php -h 18 -r -dd https://pastebin.com/Bdpm3abQ <https://pastebin.com/Bdpm3abQ> HP Procurve 1810G - 8GE, P2.22 Regards Simon

2 6

Re: [Observium] unable to add device from Web UI in 9017
by Richard Wigzell 30 Jan '18

30 Jan '18

Hello, output below. root@bsplin709:/opt/observium# svn status ? html/includes/navbar-custom.inc.php M html/includes/search/devices.inc.php ? html/overlib.js ? html/weathermap We have a custom navbar for weathermap and have search/devices.inc.php look at device purpose / description instead of location. Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk -----Original Message----- From: Mike Stupalov [mailto:mike@stupalov.ru] Sent: 30 January 2018 22:32 To: Observium <observium(a)observium.org>; Richard Wigzell <richard.wigzell(a)it.ox.ac.uk> Subject: Re: [Observium] unable to add device from Web UI in 9017 Hi, I'm not see errors and there no changes relevant to such trouble. Show status of your local install: cd /opt/observium svn status > Richard Wigzell <mailto:richard.wigzell@it.ox.ac.uk> > 31 January 2018 at 01:02 > > Hello, it was last confirmed working from the Web UI in 9002. > > We are using exact same hostname, community name and version in both Web UI and CLI. > > cid:image001.jpg@01CE9215.D39244B0 <https://www.it.ox.ac.uk/> > > > > *Richard Wigzell* > Technical Lead, Storage Platforms > IT Services | University of Oxford > > 13 Banbury Road, Oxford OX2 6NN > > > *T:* 01865 616282 > www.it.ox.ac.uk <https://www.it.ox.ac.uk/> > > *From:*observium [mailto:observium-bounces@observium.org] *On Behalf Of *Tom Laermans > *Sent:* 30 January 2018 21:52 > *To:* observium(a)observium.org > *Subject:* Re: [Observium] unable to add device from Web UI in 9017 > > What version did you update from? Did it work in that version? You're using the same hostname and community from the CLI? > > Tom > > On 1/30/2018 10:36 PM, Richard Wigzell wrote: > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > Tom Laermans <mailto:tom.laermans@powersource.cx> > 31 January 2018 at 00:52 > What version did you update from? Did it work in that version? You're using the same hostname and community from the CLI? > > Tom > > On 1/30/2018 10:36 PM, Richard Wigzell wrote: > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > Richard Wigzell <mailto:richard.wigzell@it.ox.ac.uk> > 31 January 2018 at 00:36 > > Hello, we have updated to 9017 and are not able to add a device from web UI but can fine from the CLI. > > We just get this: > > Anyone having this issue ? or suggestions welcome please. > > cid:image001.jpg@01CE9215.D39244B0 <https://www.it.ox.ac.uk/> > > > > *Richard Wigzell* > Technical Lead, Storage Platforms > IT Services | University of Oxford > > 13 Banbury Road, Oxford OX2 6NN > > > *T:* 01865 616282 > www.it.ox.ac.uk <https://www.it.ox.ac.uk/> > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov https://stupalov.com

1 0

unable to add device from Web UI in 9017
by Richard Wigzell 30 Jan '18

30 Jan '18

Hello, we have updated to 9017 and are not able to add a device from web UI but can fine from the CLI. We just get this: [cid:image002.png@01D39A12.6C361990] Anyone having this issue ? or suggestions welcome please. [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

4 6

Cannot login. can this be license related?
by Henrik Cednert (Filmlance) 30 Jan '18

30 Jan '18

Hello Noticed yesterday that I had issues logging in to observium and the issues have continued. I don't get any error it just reloads the page and asks for user/pass, no "wrong password", "unknown user" nor "license error". I have looked in all logs I can think of but I cannot find a trace of what could be causing this. I have some sort of memory that there was some oddness when you renew your license. I can run 'svn update' though and if it was license related I don't think that works, right? Tried update AFTER I realised I cannot login, so not related to update. Nothing have changed in the environment or with the installation. Any pointers to where I should look for clues? Cheers and thanks -- Henrik Cednert cto | ...and then some Filmlance International mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ]

3 3

netflow analyzer
by Farshid Abediny 27 Jan '18

27 Jan '18

Hello, is there anyway that add a integrated netflow analyzer to observium? thanks.

2 1

Monitoring MPLS LSPs
by Luis Balbinot 25 Jan '18

25 Jan '18

Hello there. I've just started working on a new module to include support for MPLS LSPs. Since I only have access to Juniper hardware I'm only working exclusively with the MPLS-MIB but it should be fairly easy to support other MIBs (like Cisco's MPLS-TE mib) because the dataset is pretty much the same. I have the discovery and polling modules ready. If anyone with experience on the web interface wants to join me, please let me know. Luis

2 1

Alerts on custom OID
by Brad Bendy 22 Jan '18

22 Jan '18

Hi, Trying to setup alerts on custom OID, my OID returns just a number and want to alert if it's above or below that. What do I use for the conditions? Im assuming fort the device associations I can reference by hostname or is there other OID/SNMP specific ones? I don't see this anywhere in the docs. So no clue what to put :) Thanks!

2 2

No Syslog alert notifications
by Richard Wigzell 18 Jan '18

18 Jan '18

Hello, we have syslog alert rules setup that are creating syslog alerts and we have a valid contact associated but we do not receive alert notifications. [cid:image002.png@01D3907B.8F6870C0] [cid:image003.png@01D3907C.7B0891E0] Email: [cid:image004.png@01D3907C.7B0891E0] We are running pro 8993. All other alerts working fine. Any help would be appreciated. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

Traps
by Arnoldo Vidal Bravo 18 Jan '18

18 Jan '18

hi, i'm deploying observium but it send mails on trap receive? -- Saluda cordialmente

5 5

wifi_ap table missing?
by Simon Mousey Smith 18 Jan '18

18 Jan '18

Hi All Has anybody else seen this issue? It appears the wifi_aps table is missing? However I do have an wifi_accesspoints table? [2018/01/12 00:33:21 +0000] discovery.php(1241): Failed dbQuery (#1146 - Table 'observium.wifi_aps' doesn't exist), Query: SELECT * FROM `wifi_aps` WHERE `device_id` = ’38' SiMacBookPro:Observium Simon$ grep -r "wifi_aps" * html/pages/device.inc.php: $device_ap_count = dbFetchCell('SELECT COUNT(wifi_ap_id) FROM `wifi_aps` WHERE `device_id` = ?', array($device['device_id'])); html/pages/device/wifi/accesspoints.inc.php: $accesspoints = dbFetchRows('SELECT * FROM `wifi_aps` WHERE `device_id` = ? ORDER BY `ap_name` ASC', array($device['device_id'])); includes/discovery/wifi.inc.php:foreach (dbFetchRows("SELECT * FROM `wifi_aps` WHERE `device_id` = ?", array($device['device_id'])) as $ap) includes/discovery/wifi.inc.php: $GLOBALS['cache']['wifi_aps'][$ap['ap_index']] = $ap; includes/definitions/entities.inc.php:$config['entities'][$entity]['table'] = "wifi_aps"; includes/wifi.inc.php: if (is_array($GLOBALS['cache']['wifi_aps'][$ap['ap_index']])) includes/wifi.inc.php: $ap_db = $GLOBALS['cache']['wifi_aps'][$ap['ap_index']]; includes/wifi.inc.php: dbUpdate($update, 'wifi_aps', '`wifi_ap_id` = ?', array($ap_db['wifi_ap_id'])); includes/wifi.inc.php: $ap_id = dbInsert($insert, 'wifi_aps'); includes/wifi.inc.php: $GLOBALS['cache']['wifi_aps'][$ap['ap_index']] = $params; SiMacBookPro:Observium Simon$ grep -r "wifi_accesspoints" * html/includes/print/dot1xtable.inc.php: $aps_db = dbFetchRows("SELECT `wifi_accesspoint_id`, `name`, `ap_number` FROM `wifi_accesspoints`"); html/includes/search/accesspoints.inc.php:$results = dbFetchRows("SELECT * FROM `wifi_accesspoints` html/includes/graphs/wifi/auth.inc.php: $radio = dbFetchRow("SELECT * FROM `wifi_accesspoints`, `wifi_radios` WHERE `wifi_accesspoints`.`wifi_accesspoint_id` = `wifi_radios`.`accesspoint_id` AND `wifi_radios`.`wifi_radio_id` = ? ", array($vars['id'])); html/pages/device/wifi/overview.inc.php: $radios = dbFetchRows("SELECT * FROM `wifi_accesspoints` LEFT JOIN `wifi_radios` ON `wifi_accesspoints`.`wifi_accesspoint_id` = `wifi_radios`.`radio_ap` WHERE `wifi_accesspoints`.`device_id` = ? ", array($device['device_id'])); html/pages/device/wifi/accesspoint.inc.php: $radios = dbFetchRows("SELECT * FROM `wifi_accesspoints`, `wifi_radios` WHERE `wifi_accesspoints`.`wifi_accesspoint_id` = `wifi_radios`.`radio_ap` AND `device_id` = ? AND `wifi_accesspoints`.`wifi_accesspoint_id` = ? ORDER BY `radio_number` ASC", array($device['device_id'], $vars['accesspoint'])); includes/polling/wifi/trapeze-networks-client-session-mib.inc.php:$radios_db = dbFetchRows("SELECT `wifi_radio_id`, `radio_number`,`ap_number`, `wifi_accesspoints`.`device_id` FROM `wifi_accesspoints`, `wifi_radios` WHERE `wifi_radios`.`radio_ap` = wifi_accesspoints.`wifi_accesspoint_id` AND wifi_accesspoints.`device_id` = ?", array($device['device_id'])); includes/definitions.inc.php: 'ucd_diskio', 'vlans', 'vlans_fdb', 'vminfo', 'vrfs', 'wifi_accesspoints', 'wifi_sessions', includes/discovery/wifi/trapeze-networks-ap-config-mib.inc.php:$accesspoints_db = dbFetchRows("SELECT `name`, `model`, `location`, `fingerprint`, `serial`, `device_id`, `ap_number` FROM `wifi_accesspoints` WHERE `device_id` = ?", array($device['device_id'])); includes/discovery/wifi/trapeze-networks-ap-config-mib.inc.php: $accesspoint_id = dbInsert($db_insert, 'wifi_accesspoints'); includes/discovery/wifi/trapeze-networks-ap-config-mib.inc.php: $updated = dbUpdate($db_insert, 'wifi_accesspoints', '`ap_number` = ? AND `device_id` = ?', array($ap_number, $device['device_id'])); includes/discovery/wifi/trapeze-networks-ap-config-mib.inc.php:$accesspoints_db = dbFetchRows("SELECT `wifi_accesspoint_id`, `ap_number` FROM `wifi_accesspoints` WHERE `device_id` = ?", array($device['device_id'])); update/db_schema_mysql.sql:-- Table structure for table `wifi_accesspoints` update/db_schema_mysql.sql:CREATE TABLE `wifi_accesspoints` ( update/db_schema_mysql.sql:-- Indexes for table `wifi_accesspoints` update/db_schema_mysql.sql:ALTER TABLE `wifi_accesspoints` update/db_schema_mysql.sql:-- AUTO_INCREMENT for table `wifi_accesspoints` update/db_schema_mysql.sql:ALTER TABLE `wifi_accesspoints` update/141.sql:CREATE TABLE `wifi_accesspoints` ( `wifi_accesspoint_id` int(11) NOT NULL AUTO_INCREMENT, `device_id` int(11) NOT NULL, `ap_number` int(11) DEFAULT NULL, `name` varchar(45) DEFAULT NULL, `serial` varchar(45) DEFAULT NULL, `model` varchar(45) DEFAULT NULL, `location` varchar(45) DEFAULT NULL, `fingerprint` varchar(45) DEFAULT NULL, `delete` tinyint(4) DEFAULT NULL, PRIMARY KEY (`wifi_accesspoint_id`)); update/186.sql:ALTER TABLE `wifi_accesspoints` CONVERT TO CHARACTER SET utf8 COLLATE utf8_unicode_ci; SiMacBookPro:Observium Simon$ I can see when looking threw the code quickly that the is a sql file for wifi_accesspoints but not one for wifi_aps Can I just clone/copy the wifi_accesspoints table to wifi_aps? Regards Simon - Hestor Ltd

5 7

Observium Rolling PRO - status summary showing wrong info
by Serghei Golipad 17 Jan '18

17 Jan '18

Hi Guys, Ever since updating to php7 I'm seeing devices down in status summary but when I go to click on them it's not showing anything. I know for a fact there are no devices down. It happens very frequently on daily basis. Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

2 4

MIB support for UniFi APs and controller
by Thomas Stather 16 Jan '18

16 Jan '18

Hello Id like to ask to add the support for UniFi APs (gen1 and 2 should be working, gen3 has issues as far as i know). Ubiquiti networks provide 2 MIBs which are attached. One is for the UniFi controller, one for all APs I saw that there is a feature request for the CE at [1], but as i read there hasn't been any real progress yet. If i can help somethin in this matter, please let me know (we have quite a bunch of gen1 and 2 APs, thats why i ask). Best, Thomas [1]: http://jira.observium.org/browse/OBS-1990 -- Thomas Stather IT Services VCP4, VCP6-DCV Tel: +49 6221-486 628 Fax: +49 6221-486 561 ------------------------------------------------------------------------ Max Planck Institute for Medical Research (MPImF) Jahnstrasse 29, 69120 Heidelberg Germany

1 0

email alerts
by Ben Filippelli 16 Jan '18

16 Jan '18

In the doc it says under Alert Settings - this is only applicable to subscription edition. Does that mean just the first item (alerter = true)? Or the entire alert settings config http://docs.observium.org/config_options/#alert-settings Right now we get #slack alerts but not email, I see that in config.php Im missing the line for $config['email']['enable'] = TRUE; But also wondering if the hostname should be in quotes 'mailrelay.host' or mailrelay.host thanks [cid:image001.jpg@01D34D97.AB585650]<https://www.level5mgmt.com/> Ben Filippelli IT Director 455 NW 35th St #105<http://maps.google.com/maps/place?cid=2163887490114630684&q=3200+N+federal+…> Boca Raton, FL 33431<http://maps.google.com/maps/place?cid=2163887490114630684&q=3200+N+federal+…> P:561.509.2077 x 315 F:561.300.2376 [cid:image002.jpg@01D34D97.AB585650]<mailto:support@level5mgmt.com?subject=Hi%20Level5!> [cid:image003.jpg@01D34D97.AB585650] <http://twitter.com/#!/Level5Mgmt> [cid:image004.jpg@01D34D97.AB585650] <http://fb.com/level5mgmt> Our Success is built on referrals from satisfied clients!

1 1

customize alerts
by Arnoldo Vidal Bravo 16 Jan '18

16 Jan '18

Where i can customize alerts? because we sendit by SMS. We need shortest messages. -- Saluda cordialmente

1 0

Port Description parsing doesn't work for custom port desctiptions
by Vlad Kratsberg 13 Jan '18

13 Jan '18

HI, Ager setting up observium with distributed pollers we are no longer able to display stats for our custom defined ports, while Descriptions that are built work just fine ( Transit, Peering,Core ). For example in config.php we have the following. $config['int_groups'][] = "DCI"; Selecting DCI from Ports menu would display the following: [image: Inline image 1] I also noticed that port_descr_type column in ports table is not being populated resulting in description parsing not to work: [image: Inline image 2] Did anyone experience something similar ? I would appreciate any help. Thank you

3 4

Re: [Observium] Missing ethernet port when monitoring Synology NAS
by Adam Armstrong 12 Jan '18

12 Jan '18

It'd be wiser if debian didn't keep fucking up their distro by making massive default-level changes to behaviour. 9 /used/ to work. Mariadb /used/ to work. adam. Adam Armstrong Managing Director & Lead Architect Observium Limited http://www.observium.org http://docs.observium.org http://jira.observium.org On 2018-01-12 13:06:36, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl> wrote: Hi, I Installed Jessie (Debian 8), PHP5 and mysql and now it’s working fine (all interfaces show up). (Perhaps it’s wise to not mention the Debian 9 (and mariadb) option in the install guide) Regards, Edwin I will install a Jessie version (Debian 8) and mysql instead of MariaDB. I’ll let you know. Thanks for now. Regards, Edwin From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, January 11, 2018 7:26 PM To: observium(a)observium.org Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS Try removing MariaDB and finding a MySQL package somewhere. That database is behaving strangely. adam. Adam Armstrong Managing Director & Lead Architect Observium Limited http://www.observium.org [http://www.observium.org] http://docs.observium.org [http://docs.observium.org] http://jira.observium.org [http://jira.observium.org] On 2018-01-11 16:48:14, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl [mailto:e.r.dijkstra@ziggo.nl]> wrote: In my case: Server version: 10.1.23-MariaDB-9+deb9u1 Raspbian 9.0 (For the time being, it’s running on a Raspberry Pi (just to see whether Observium will work for me) I followed the Debian/Ubuntu installation guide on the Observium website. Regards, Edwin From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: Thursday, January 11, 2018 5:19 PM To: observium(a)observium.org [mailto:observium@observium.org] Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS This is not an Observium issue, this is a weirdly configured database issue. This isn't the first time recently there's been someone seeing db insert problems that make zero sense. It's complaining about duplicate PRIMARY key, but that key is just port_id, which is AUTO_INCREMENT. If it thinks there's a duplicate of an AUTO_INCREMENTING primary key, it's the MySQL server being utterly broken. It probably also explains why that guy with the the routeros device couldn't insert more than two devices either. Presumably they're both running the same broken MySQL. Has someone packed up a MySQL in some distro with dumb settings? What OS is this running on, and where did the MySQL package come from? adam. Adam Armstrong Managing Director & Lead Architect Observium Limited http://www.observium.org [http://www.observium.org] http://docs.observium.org [http://docs.observium.org] http://jira.observium.org [http://jira.observium.org] On 2018-01-11 16:09:29, Tom Laermans <tom.laermans(a)powersource.cx [mailto:tom.laermans@powersource.cx]> wrote: Looks like ifAlias isn't being returned. The INSERT passes '' to be inserted, which defaults to 0, but can only work for the first interface a device has... Tom On 01/11/2018 05:03 PM, Edwin Dijkstra wrote: Ran the discovery, part of the output: o Discovering ports . SQL[INSERT INTO `ports` (`device_id`,`ifIndex`,`ifAlias`,`ifDescr`,`ifName`,`ifType`) VALUES ('5','2','','eth0','eth0','ethernetCsmacd')] SQL RUNTIME[0.00110412s] ERROR[Error in query: (Duplicate entry '0' for key 'PRIMARY') 1062] SQL[SELECT * FROM `ports` WHERE `device_id` = '5' AND `ifIndex` = '2'] SQL RUNTIME[0.00229788s] eth0(2)[] SQL[INSERT INTO `ports` (`device_id`,`ifIndex`,`ifAlias`,`ifDescr`,`ifName`,`ifType`) VALUES ('5','3','','sit0','sit0','tunnel')] SQL RUNTIME[0.00102282s] ERROR[Error in query: (Duplicate entry '0' for key 'PRIMARY') 1062] A database issue? Regards, Edwin From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: Wednesday, January 10, 2018 10:48 PM To: observium(a)observium.org [mailto:observium@observium.org] Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS ./discovery.php -h <hostname> -m ports -d adam. Adam Armstrong Managing Director & Lead Architect Observium Limited http://www.observium.org [http://www.observium.org] http://docs.observium.org [http://docs.observium.org] http://jira.observium.org [http://jira.observium.org] On 2018-01-10 16:06:16, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl [mailto:e.r.dijkstra@ziggo.nl]> wrote: That’s what I thought;) When I scan the device using a simple SNMP tester, 3 IF’s are found: Found standard interfaces: 1:lo: (001) lo Traffic,Connected,10 MBit/s,Software Loopback,lo, 64 Bit 2:eth0: (002) eth0 Traffic,Connected,1 GBit/s,Ethernet,eth0, 64 Bit 3:sit0: (003) sit0 Traffic,Not Connected,,Tunnel,sit0, 64 Bit Testing standard interfaces... 1/10/2018 4:41:48 PM (861 ms) : SNMP Datatype: ASN_APP_COUNTER64 1/10/2018 4:41:48 PM (865 ms) : SNMP Datatype: ASN_APP_COUNTER64 Test 1:lo (1.3.6.1.2.1.31.1.1.1.6.1,1.3.6.1.2.1.31.1.1.1.10.1): in=1891611 out=1891611 1/10/2018 4:41:48 PM (871 ms) : SNMP Datatype: ASN_APP_COUNTER64 1/10/2018 4:41:48 PM (877 ms) : SNMP Datatype: ASN_APP_COUNTER64 Test 2:eth0 (1.3.6.1.2.1.31.1.1.1.6.2,1.3.6.1.2.1.31.1.1.1.10.2): in=92965523517 out=2582822450 1/10/2018 4:41:48 PM (884 ms) : SNMP Datatype: ASN_APP_COUNTER64 1/10/2018 4:41:48 PM (887 ms) : SNMP Datatype: ASN_APP_COUNTER64 Test 3:sit0 (1.3.6.1.2.1.31.1.1.1.6.3,1.3.6.1.2.1.31.1.1.1.10.3): in=0 out=0 In Observium I only see the lo IF: Regards, Regards, Edwin From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: Wednesday, January 10, 2018 4:26 PM To: 'Observium' Cc: 'Observium' Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS Monitoring interfaces is about as industry standard as it gets. If we're not picking up a port, it's because your device is bizarrely not exposing it. Have you tried walking the ifTable and seeing if it's present? Adam. Sent from BlueMail [http://www.bluemail.me/r?b=11687] On 9 Jan 2018, at 16:42, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl [mailto:e.r.dijkstra@ziggo.nl]> wrote: Hi, I’m pretty new on ObserviumJ and could use some help: Added my Synology NAS. Want to monitor also the Network interface, but the only port I see is the loopback IF… Thanks in advance. Regards, Edwin observium mailing list observium(a)observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium] _______________________________________________ observium mailing list observium(a)observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

1 1

Re: [Observium] Missing ethernet port when monitoring Synology NAS
by Adam Armstrong 12 Jan '18

12 Jan '18

Try removing MariaDB and finding a MySQL package somewhere. That database is behaving strangely. adam. Adam Armstrong Managing Director & Lead Architect Observium Limited http://www.observium.org http://docs.observium.org http://jira.observium.org On 2018-01-11 16:48:14, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl> wrote: In my case: Server version: 10.1.23-MariaDB-9+deb9u1 Raspbian 9.0 (For the time being, it’s running on a Raspberry Pi (just to see whether Observium will work for me) I followed the Debian/Ubuntu installation guide on the Observium website. Regards, Edwin From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, January 11, 2018 5:19 PM To: observium(a)observium.org Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS This is not an Observium issue, this is a weirdly configured database issue. This isn't the first time recently there's been someone seeing db insert problems that make zero sense. It's complaining about duplicate PRIMARY key, but that key is just port_id, which is AUTO_INCREMENT. If it thinks there's a duplicate of an AUTO_INCREMENTING primary key, it's the MySQL server being utterly broken. It probably also explains why that guy with the the routeros device couldn't insert more than two devices either. Presumably they're both running the same broken MySQL. Has someone packed up a MySQL in some distro with dumb settings? What OS is this running on, and where did the MySQL package come from? adam. Adam Armstrong Managing Director & Lead Architect Observium Limited http://www.observium.org [http://www.observium.org] http://docs.observium.org [http://docs.observium.org] http://jira.observium.org [http://jira.observium.org] On 2018-01-11 16:09:29, Tom Laermans <tom.laermans(a)powersource.cx [mailto:tom.laermans@powersource.cx]> wrote: Looks like ifAlias isn't being returned. The INSERT passes '' to be inserted, which defaults to 0, but can only work for the first interface a device has... Tom On 01/11/2018 05:03 PM, Edwin Dijkstra wrote: Ran the discovery, part of the output: o Discovering ports . SQL[INSERT INTO `ports` (`device_id`,`ifIndex`,`ifAlias`,`ifDescr`,`ifName`,`ifType`) VALUES ('5','2','','eth0','eth0','ethernetCsmacd')] SQL RUNTIME[0.00110412s] ERROR[Error in query: (Duplicate entry '0' for key 'PRIMARY') 1062] SQL[SELECT * FROM `ports` WHERE `device_id` = '5' AND `ifIndex` = '2'] SQL RUNTIME[0.00229788s] eth0(2)[] SQL[INSERT INTO `ports` (`device_id`,`ifIndex`,`ifAlias`,`ifDescr`,`ifName`,`ifType`) VALUES ('5','3','','sit0','sit0','tunnel')] SQL RUNTIME[0.00102282s] ERROR[Error in query: (Duplicate entry '0' for key 'PRIMARY') 1062] A database issue? Regards, Edwin From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: Wednesday, January 10, 2018 10:48 PM To: observium(a)observium.org [mailto:observium@observium.org] Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS ./discovery.php -h <hostname> -m ports -d adam. Adam Armstrong Managing Director & Lead Architect Observium Limited http://www.observium.org [http://www.observium.org] http://docs.observium.org [http://docs.observium.org] http://jira.observium.org [http://jira.observium.org] On 2018-01-10 16:06:16, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl [mailto:e.r.dijkstra@ziggo.nl]> wrote: That’s what I thought;) When I scan the device using a simple SNMP tester, 3 IF’s are found: Found standard interfaces: 1:lo: (001) lo Traffic,Connected,10 MBit/s,Software Loopback,lo, 64 Bit 2:eth0: (002) eth0 Traffic,Connected,1 GBit/s,Ethernet,eth0, 64 Bit 3:sit0: (003) sit0 Traffic,Not Connected,,Tunnel,sit0, 64 Bit Testing standard interfaces... 1/10/2018 4:41:48 PM (861 ms) : SNMP Datatype: ASN_APP_COUNTER64 1/10/2018 4:41:48 PM (865 ms) : SNMP Datatype: ASN_APP_COUNTER64 Test 1:lo (1.3.6.1.2.1.31.1.1.1.6.1,1.3.6.1.2.1.31.1.1.1.10.1): in=1891611 out=1891611 1/10/2018 4:41:48 PM (871 ms) : SNMP Datatype: ASN_APP_COUNTER64 1/10/2018 4:41:48 PM (877 ms) : SNMP Datatype: ASN_APP_COUNTER64 Test 2:eth0 (1.3.6.1.2.1.31.1.1.1.6.2,1.3.6.1.2.1.31.1.1.1.10.2): in=92965523517 out=2582822450 1/10/2018 4:41:48 PM (884 ms) : SNMP Datatype: ASN_APP_COUNTER64 1/10/2018 4:41:48 PM (887 ms) : SNMP Datatype: ASN_APP_COUNTER64 Test 3:sit0 (1.3.6.1.2.1.31.1.1.1.6.3,1.3.6.1.2.1.31.1.1.1.10.3): in=0 out=0 In Observium I only see the lo IF: Regards, Regards, Edwin From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: Wednesday, January 10, 2018 4:26 PM To: 'Observium' Cc: 'Observium' Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS Monitoring interfaces is about as industry standard as it gets. If we're not picking up a port, it's because your device is bizarrely not exposing it. Have you tried walking the ifTable and seeing if it's present? Adam. Sent from BlueMail [http://www.bluemail.me/r?b=11687] On 9 Jan 2018, at 16:42, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl [mailto:e.r.dijkstra@ziggo.nl]> wrote: Hi, I’m pretty new on ObserviumJ and could use some help: Added my Synology NAS. Want to monitor also the Network interface, but the only port I see is the loopback IF… Thanks in advance. Regards, Edwin observium mailing list observium(a)observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium] _______________________________________________ observium mailing list observium(a)observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

2 2

Problem Montioring SVC in Observium
by Haryanto Jayusman 12 Jan '18

12 Jan '18

Hi Observium, Can you help me? I have a problem when created svc for checking service Can observium check services in server? Like synology iscsi service status Because i want monitoring this service for user requiretment. Thanks & Please review configuration Regards, Haryanto Jayusman

3 3

Re: [Observium] Missing ethernet port when monitoring Synology NAS
by Roeland Mertens 12 Jan '18

12 Jan '18

> I will install a Jessie version (Debian 8) and mysql instead of > MariaDB. I’ll let you know. Thanks for now. > > Regards, > > Edwin > <..snip...> Just out of curiosity, what does "show create table ports\G" say? rgds, -- Roeland

1 0

Re: [Observium] Missing ethernet port when monitoring Synology NAS
by Simon Mousey Smith 11 Jan '18

11 Jan '18

HI All Im having a similar issue in relations to ports strangely enough? Its only started happened since last SVN update which was midday today [2018/01/11 21:57:18 +0000] poller.php(17372): Failed dbQuery (#1062 - Duplicate entry '30-4' for key 'device_ifIndex'), Query: INSERT INTO `ports` (`device_id`,`ifIndex`) VALUES ('30','4’) Observium 17.12.8997 (26th December 2017) OS Linux 4.4.0-109-generic [amd64] (Ubuntu 16.04) Apache 2.4.18 (Ubuntu) PHP 7.0.22-0ubuntu0.16.04.1 (OPcache: ENABLED) Python 2.7.12 MySQL 5.7.20-0ubuntu0.16.04.1 (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.5.5 Any suggestions? Regards Simon > On 11 Jan 2018, at 19:37, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl> wrote: > > I will install a Jessie version (Debian 8) and mysql instead of MariaDB. I’ll let you know. Thanks for now. > > Regards, > > Edwin > > > From: observium [mailto:observium-bounces@observium.org <mailto:observium-bounces@observium.org>] On Behalf Of Adam Armstrong > Sent: Thursday, January 11, 2018 7:26 PM > To: observium(a)observium.org <mailto:observium@observium.org> > Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS > > Try removing MariaDB and finding a MySQL package somewhere. That database is behaving strangely. > > adam. > > Adam Armstrong > Managing Director & Lead Architect > Observium Limited > http://www.observium.org <http://www.observium.org/> > http://docs.observium.org <http://docs.observium.org/> > http://jira.observium.org <http://jira.observium.org/>On 2018-01-11 16:48:14, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl <mailto:e.r.dijkstra@ziggo.nl>> wrote: >> >> In my case: >> >> Server version: 10.1.23-MariaDB-9+deb9u1 Raspbian 9.0 >> >> (For the time being, it’s running on a Raspberry Pi (just to see whether Observium will work for me) >> >> I followed the Debian/Ubuntu installation guide on the Observium website. >> >> Regards, >> >> Edwin >> >> >> From: observium [mailto:observium-bounces@observium.org <mailto:observium-bounces@observium.org>] On Behalf Of Adam Armstrong >> Sent: Thursday, January 11, 2018 5:19 PM >> To: observium(a)observium.org <mailto:observium@observium.org> >> Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS >> >> This is not an Observium issue, this is a weirdly configured database issue. This isn't the first time recently there's been someone seeing db insert problems that make zero sense. >> >> It's complaining about duplicate PRIMARY key, but that key is just port_id, which is AUTO_INCREMENT. If it thinks there's a duplicate of an AUTO_INCREMENTING primary key, it's the MySQL server being utterly broken. It probably also explains why that guy with the the routeros device couldn't insert more than two devices either. Presumably they're both running the same broken MySQL. >> >> Has someone packed up a MySQL in some distro with dumb settings? >> >> What OS is this running on, and where did the MySQL package come from? >> >> adam. >> >> Adam Armstrong >> Managing Director & Lead Architect >> Observium Limited >> http://www.observium.org <http://www.observium.org/> >> http://docs.observium.org <http://docs.observium.org/> >> http://jira.observium.org <http://jira.observium.org/>On 2018-01-11 16:09:29, Tom Laermans <tom.laermans(a)powersource.cx <mailto:tom.laermans@powersource.cx>> wrote: >>> >>> Looks like ifAlias isn't being returned. The INSERT passes '' to be inserted, which defaults to 0, but can only work for the first interface a device has... >>> >>> Tom >>> >>> >>> On 01/11/2018 05:03 PM, Edwin Dijkstra wrote: >>>> Ran the discovery, part of the output: >>>> >>>> o Discovering ports . >>>> SQL[INSERT INTO `ports` (`device_id`,`ifIndex`,`ifAlias`,`ifDescr`,`ifName`,`ifType`) VALUES ('5','2','','eth0','eth0','ethernetCsmacd')] >>>> SQL RUNTIME[0.00110412s] >>>> ERROR[Error in query: (Duplicate entry '0' for key 'PRIMARY') 1062] >>>> >>>> SQL[SELECT * FROM `ports` WHERE `device_id` = '5' AND `ifIndex` = '2'] >>>> SQL RUNTIME[0.00229788s] >>>> eth0(2)[] >>>> SQL[INSERT INTO `ports` (`device_id`,`ifIndex`,`ifAlias`,`ifDescr`,`ifName`,`ifType`) VALUES ('5','3','','sit0','sit0','tunnel')] >>>> SQL RUNTIME[0.00102282s] >>>> ERROR[Error in query: (Duplicate entry '0' for key 'PRIMARY') 1062] >>>> >>>> A database issue? >>>> >>>> Regards, >>>> >>>> Edwin >>>> >>>> >>>> From: observium [mailto:observium-bounces@observium.org <mailto:observium-bounces@observium.org>] On Behalf Of Adam Armstrong >>>> Sent: Wednesday, January 10, 2018 10:48 PM >>>> To: observium(a)observium.org <mailto:observium@observium.org> >>>> Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS >>>> >>>> ./discovery.php -h <hostname> -m ports -d >>>> >>>> adam. >>>> >>>> Adam Armstrong >>>> Managing Director & Lead Architect >>>> Observium Limited >>>> http://www.observium.org <http://www.observium.org/> >>>> http://docs.observium.org <http://docs.observium.org/> >>>> http://jira.observium.org <http://jira.observium.org/>On 2018-01-10 16:06:16, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl <mailto:e.r.dijkstra@ziggo.nl>> wrote: >>>>> >>>>> That’s what I thought;) >>>>> >>>>> When I scan the device using a simple SNMP tester, 3 IF’s are found: >>>>> >>>>> Found standard interfaces: >>>>> 1:lo: (001) lo Traffic,Connected,10 MBit/s,Software Loopback,lo, 64 Bit >>>>> 2:eth0: (002) eth0 Traffic,Connected,1 GBit/s,Ethernet,eth0, 64 Bit >>>>> 3:sit0: (003) sit0 Traffic,Not Connected,,Tunnel,sit0, 64 Bit >>>>> >>>>> Testing standard interfaces... >>>>> 1/10/2018 4:41:48 PM (861 ms) : SNMP Datatype: ASN_APP_COUNTER64 >>>>> 1/10/2018 4:41:48 PM (865 ms) : SNMP Datatype: ASN_APP_COUNTER64 >>>>> Test 1:lo (1.3.6.1.2.1.31.1.1.1.6.1,1.3.6.1.2.1.31.1.1.1.10.1): in=1891611 out=1891611 >>>>> 1/10/2018 4:41:48 PM (871 ms) : SNMP Datatype: ASN_APP_COUNTER64 >>>>> 1/10/2018 4:41:48 PM (877 ms) : SNMP Datatype: ASN_APP_COUNTER64 >>>>> Test 2:eth0 (1.3.6.1.2.1.31.1.1.1.6.2,1.3.6.1.2.1.31.1.1.1.10.2): in=92965523517 out=2582822450 >>>>> 1/10/2018 4:41:48 PM (884 ms) : SNMP Datatype: ASN_APP_COUNTER64 >>>>> 1/10/2018 4:41:48 PM (887 ms) : SNMP Datatype: ASN_APP_COUNTER64 >>>>> Test 3:sit0 (1.3.6.1.2.1.31.1.1.1.6.3,1.3.6.1.2.1.31.1.1.1.10.3): in=0 out=0 >>>>> >>>>> In Observium I only see the lo IF: >>>>> >>>>> Regards, >>>>> >>>>> Regards, >>>>> >>>>> Edwin >>>>> >>>>> >>>>> From: observium [mailto:observium-bounces@observium.org <mailto:observium-bounces@observium.org>] On Behalf Of Adam Armstrong >>>>> Sent: Wednesday, January 10, 2018 4:26 PM >>>>> To: 'Observium' >>>>> Cc: 'Observium' >>>>> Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS >>>>> >>>>> Monitoring interfaces is about as industry standard as it gets. If we're not picking up a port, it's because your device is bizarrely not exposing it. >>>>> >>>>> Have you tried walking the ifTable and seeing if it's present? >>>>> >>>>> Adam. >>>>> >>>>> Sent from BlueMail <http://www.bluemail.me/r?b=11687> >>>>> On 9 Jan 2018, at 16:42, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl <mailto:e.r.dijkstra@ziggo.nl>> wrote: >>>>> Hi, >>>>> >>>>> >>>>> I’m pretty new on ObserviumJ and could use some help: Added my Synology NAS. Want to monitor also the Network interface, but the only port I see is the loopback IF… >>>>> >>>>> >>>>> Thanks in advance. >>>>> >>>>> >>>>> Regards, >>>>> >>>>> >>>>> Edwin >>>>> >>>>> observium mailing list >>>>> observium(a)observium.org <mailto:observium@observium.org> >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium <http://postman.memetic.org/cgi-bin/mailman/listinfo/observium> >>>> >>>> >>>> >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org <mailto:observium@observium.org> >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium <http://postman.memetic.org/cgi-bin/mailman/listinfo/observium> > _______________________________________________ > observium mailing list > observium(a)observium.org <mailto:observium@observium.org> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium <http://postman.memetic.org/cgi-bin/mailman/listinfo/observium>

2 1

Re: [Observium] Missing ethernet port when monitoring Synology NAS
by Tom Laermans 11 Jan '18

11 Jan '18

Looks like ifAlias isn't being returned. The INSERT passes '' to be inserted, which defaults to 0, but can only work for the first interface a device has... Tom On 01/11/2018 05:03 PM, Edwin Dijkstra wrote: > > Ran the discovery, part of the output: > > o Discovering ports . > > SQL[INSERT INTO `ports` > (`device_id`,`ifIndex`,`ifAlias`,`ifDescr`,`ifName`,`ifType`) VALUES > ('5','2','','eth0','eth0','ethernetCsmacd')] > > SQL RUNTIME[0.00110412s] > > ERROR[Error in query: (Duplicate entry '0' for key 'PRIMARY') 1062] > > SQL[SELECT * FROM `ports` WHERE `device_id` = '5' AND `ifIndex` = '2'] > > SQL RUNTIME[0.00229788s] > > eth0(2)[] > > SQL[INSERT INTO `ports` > (`device_id`,`ifIndex`,`ifAlias`,`ifDescr`,`ifName`,`ifType`) VALUES > ('5','3','','sit0','sit0','tunnel')] > > SQL RUNTIME[0.00102282s] > > ERROR[Error in query: (Duplicate entry '0' for key 'PRIMARY') 1062] > > A database issue? > > Regards, > > Edwin > > *From:*observium [mailto:observium-bounces@observium.org] *On Behalf > Of *Adam Armstrong > *Sent:* Wednesday, January 10, 2018 10:48 PM > *To:* observium(a)observium.org > *Subject:* Re: [Observium] Missing ethernet port when monitoring > Synology NAS > > ./discovery.php -h <hostname> -m ports -d > > adam. > > Adam Armstrong > > Managing Director & Lead Architect > > Observium Limited > > http://www.observium.org > > http://docs.observium.org > > http://jira.observium.org > > On 2018-01-10 16:06:16, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl > <mailto:e.r.dijkstra@ziggo.nl>> wrote: > > That’s what I thought;) > > When I scan the device using a simple SNMP tester, 3 IF’s are found: > > Found standard interfaces: > > 1:lo: (001) lo Traffic,Connected,10 MBit/s,Software Loopback,lo, > 64 Bit > > 2:eth0: (002) eth0 Traffic,Connected,1 GBit/s,Ethernet,eth0, 64 Bit > > 3:sit0: (003) sit0 Traffic,Not Connected,,Tunnel,sit0, 64 Bit > > Testing standard interfaces... > > 1/10/2018 4:41:48 PM (861 ms) : SNMP Datatype: ASN_APP_COUNTER64 > > 1/10/2018 4:41:48 PM (865 ms) : SNMP Datatype: ASN_APP_COUNTER64 > > Test 1:lo (1.3.6.1.2.1.31.1.1.1.6.1,1.3.6.1.2.1.31.1.1.1.10.1): > in=1891611 out=1891611 > > 1/10/2018 4:41:48 PM (871 ms) : SNMP Datatype: ASN_APP_COUNTER64 > > 1/10/2018 4:41:48 PM (877 ms) : SNMP Datatype: ASN_APP_COUNTER64 > > Test 2:eth0 (1.3.6.1.2.1.31.1.1.1.6.2,1.3.6.1.2.1.31.1.1.1.10.2): > in=92965523517 out=2582822450 > > 1/10/2018 4:41:48 PM (884 ms) : SNMP Datatype: ASN_APP_COUNTER64 > > 1/10/2018 4:41:48 PM (887 ms) : SNMP Datatype: ASN_APP_COUNTER64 > > Test 3:sit0 (1.3.6.1.2.1.31.1.1.1.6.3,1.3.6.1.2.1.31.1.1.1.10.3): > in=0 out=0 > > In Observium I only see the lo IF: > > Regards, > > Regards, > > Edwin > > *From:*observium [mailto:observium-bounces@observium.org] *On > Behalf Of *Adam Armstrong > *Sent:* Wednesday, January 10, 2018 4:26 PM > *To:* 'Observium' > *Cc:* 'Observium' > *Subject:* Re: [Observium] Missing ethernet port when monitoring > Synology NAS > > Monitoring interfaces is about as industry standard as it gets. If > we're not picking up a port, it's because your device is bizarrely > not exposing it. > > Have you tried walking the ifTable and seeing if it's present? > > Adam. > > Sent from BlueMail <http://www.bluemail.me/r?b=11687> > > On 9 Jan 2018, at 16:42, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl > <mailto:e.r.dijkstra@ziggo.nl>> wrote: > > Hi, > > I’m pretty new on ObserviumJand could use some help: Added my > Synology NAS. Want to monitor also the Network interface, but the > only port I see is the loopback IF… > > Thanks in advance. > > Regards, > > Edwin > > ------------------------------------------------------------------------ > > observium mailing list observium(a)observium.org > <mailto:observium@observium.org> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 3

Re: [Observium] Missing ethernet port when monitoring Synology NAS
by Adam Armstrong 11 Jan '18

11 Jan '18

./discovery.php -h <hostname> -m ports -d adam. Adam Armstrong Managing Director & Lead Architect Observium Limited http://www.observium.org http://docs.observium.org http://jira.observium.org On 2018-01-10 16:06:16, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl> wrote: That’s what I thought;) When I scan the device using a simple SNMP tester, 3 IF’s are found: Found standard interfaces: 1:lo: (001) lo Traffic,Connected,10 MBit/s,Software Loopback,lo, 64 Bit 2:eth0: (002) eth0 Traffic,Connected,1 GBit/s,Ethernet,eth0, 64 Bit 3:sit0: (003) sit0 Traffic,Not Connected,,Tunnel,sit0, 64 Bit Testing standard interfaces... 1/10/2018 4:41:48 PM (861 ms) : SNMP Datatype: ASN_APP_COUNTER64 1/10/2018 4:41:48 PM (865 ms) : SNMP Datatype: ASN_APP_COUNTER64 Test 1:lo (1.3.6.1.2.1.31.1.1.1.6.1,1.3.6.1.2.1.31.1.1.1.10.1): in=1891611 out=1891611 1/10/2018 4:41:48 PM (871 ms) : SNMP Datatype: ASN_APP_COUNTER64 1/10/2018 4:41:48 PM (877 ms) : SNMP Datatype: ASN_APP_COUNTER64 Test 2:eth0 (1.3.6.1.2.1.31.1.1.1.6.2,1.3.6.1.2.1.31.1.1.1.10.2): in=92965523517 out=2582822450 1/10/2018 4:41:48 PM (884 ms) : SNMP Datatype: ASN_APP_COUNTER64 1/10/2018 4:41:48 PM (887 ms) : SNMP Datatype: ASN_APP_COUNTER64 Test 3:sit0 (1.3.6.1.2.1.31.1.1.1.6.3,1.3.6.1.2.1.31.1.1.1.10.3): in=0 out=0 In Observium I only see the lo IF: Regards, Regards, Edwin From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Wednesday, January 10, 2018 4:26 PM To: 'Observium' Cc: 'Observium' Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS Monitoring interfaces is about as industry standard as it gets. If we're not picking up a port, it's because your device is bizarrely not exposing it. Have you tried walking the ifTable and seeing if it's present? Adam. Sent from BlueMail [http://www.bluemail.me/r?b=11687] On 9 Jan 2018, at 16:42, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl [mailto:e.r.dijkstra@ziggo.nl]> wrote: Hi, I’m pretty new on ObserviumJ and could use some help: Added my Synology NAS. Want to monitor also the Network interface, but the only port I see is the loopback IF… Thanks in advance. Regards, Edwin observium mailing list observium(a)observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

2 1

Polling/alerts
by Hermes J. Martinez 11 Jan '18

11 Jan '18

Hello everyone, I am new to Observium and I have a question, can someone explain to me how the polling works? And the email alerts are sent when the device is down/up(Recover) or when the polling time is met? For example: In the next image I have two cases at 9:37am I received the email for the alert and for the recovery (this is normal or I need to check somethings in the config?) Thank you! kind Regards Hermes J. Martinez Sistemas corporativo <mailto:hermes.martinez@pueblobonito.com.mx> hermes.martinez(a)pueblobonito.com.mx (669) 989-8900 | EXT 8656 (669) 120-8470 <http://www.pueblobonito.com/> www.pueblobonito.com.mx <http://www.pueblobonito.com/real-escape> Read about the Real Escape at Pueblo Bonito Connect with us <https://twitter.com/PuebloBonito> <https://plus.google.com/103008660176547960870/about> <https://www.facebook.com/PuebloBonitoResort> <https://www.instagram.com/pueblobonito/> <http://www.pueblobonito.com/blog/> Do you really need to print this e-mail? En realidad necesita imprimir este correo? Aviso Legal / Legal Notice http://img.pueblobonito.com.mx/legal

2 2

Consultant help?
by Ben Filippelli 11 Jan '18

11 Jan '18

Is there any gurus out there willing to work with me on setting up some remote monitoring and alerts on observium Sent from Nine<http://www.9folders.com/>

7 15

stopping queued alerts
by Edvinas K 10 Jan '18

10 Jan '18

Hello, Recently we had a case when network infrastructure went down, and only after some time we fixed it. Observium noticed it and everything was OK. But in meantime of fixing it - Observium started to flood with alerts - this may be the correct case. But after we repaired the network - and everything was OK, we still had a flood of old errors and it continued about an hour or so. I tried to disable email alerts through config.php, supress all alerts through WEB interface - but nothing helped. So is there any manual way to stop the Alerting queue ? Thanks

3 3

Re: [Observium] Missing ethernet port when monitoring Synology NAS
by Adam Armstrong 10 Jan '18

10 Jan '18

Monitoring interfaces is about as industry standard as it gets. If we're not picking up a port, it's because your device is bizarrely not exposing it. Have you tried walking the ifTable and seeing if it's present? Adam. ⁣Sent from BlueMail On 9 Jan 2018, 16:42, at 16:42, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl> wrote: >Hi, > > > >I'm pretty new on ObserviumJ and could use some help: Added my Synology >NAS. >Want to monitor also the Network interface, but the only port I see is >the >loopback IF. > > > >Thanks in advance. > > > >Regards, > > > >Edwin > > > >------------------------------------------------------------------------ > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Adjust values returned for custom OID
by Vater, Wolfgang 10 Jan '18

10 Jan '18

Hi, I collect temperature data through a custom OID The value returned is 236. That is 23.6 °C Is there a way to have Observium display this with one decimal point? Wolfgang Vater | Lead Client Architect | Enterprise Services Unisys Deutschland GmbH | +49 162 255 9338 | wolfgang.vater(a)unisys.com | Philipp-Reis-Str. 2 | 65795 Hattersheim <http://www.unisys.com/> Unisys Deutschland GmbH | Geschäftsführer: Sandro Lindner & Dr. Uwe Heckert | Sitz der Gesellschaft: Hattersheim | Amtsgericht: Frankfurt/Main HRB 7929 THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE PROPRIETARY MATERIAL and is thus for use only by the intended recipient. If you received this in error, please contact the sender and delete the e-mail and its attachments from all computers. DIESE E-MAIL IST AUSSCHLIESSLICH FÜR DEN ADRESSATEN BESTIMMT UND KANN VERTRAULICHE INFORMATIONEN ENTHALTEN. Sollten Sie nicht der Adressat dieser Informationen sein, bitten wir Sie, sich mit dem Absender in Verbindung zu setzen und die Informationen von Ihren Endgeräten zu entfernen. <http://www.linkedin.com/company/unisys> <http://twitter.com/unisyscorp> <https://plus.google.com/+UnisysCorp/posts> <http://www.youtube.com/theunisyschannel> <http://www.facebook.com/unisyscorp> <https://vimeo.com/unisys> <http://blogs.unisys.com/>

5 6

exclude or skip wildcard match for poller and discovery
by Richard Wigzell 10 Jan '18

10 Jan '18

Hello, We are currently running Pro r8993 with 650+ devices and will be adding another 400 or so shortly, to support this we will try a deployment as described in some detail by Markus: http://blog.best-practice.se/2017/10/scaling-observium-horizontally.html We do however also have another edge case to deal with in the form of an infrastructure that we cannot look into but can send out of, the inhibitor is political and not technical. We are halfway to solving it technically however by using a poller remotely with wildcard host name matching as the 'remote' stuff has a common domain part. Our other 'normal' pollers however need to be told to exclude or skip polling / discovery of the remote devices. Can a wildcard skip or exclude be added to the poller-wrapper script for this purpose? Picture attached for reference. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

3 3

graphs
by Arnoldo Vidal Bravo 10 Jan '18

10 Jan '18

Hi, We are using Observium SE Version Information *Observium* 17.11.8960 (29th November 2017) *OS* Linux 2.6.32-696.16.1.el6.x86_64 [amd64] (CentOS 6.9) *Apache* 2.2.15 (CentOS) *PHP* 7.0.24 (OPcache: ENABLED) *Python* 2.6.6 *MySQL* 5.1.73 (extension: mysqli 5.1.73) *SNMP* NET-SNMP 5.5 *RRDtool* 1.6.0 We have a server (Mysql+rrd+apache) and 419 devices monitored, but not showas the graphs, it says NAN. There any reason for this? Cron job is setup # Run multithreaded poller wrapper every 5 minutes */5 * * * * root /opt/observium/poller-wrapper.py >> /dev/null 2>&1 -- Saluda cordialmente

3 5

Alert Checker
by Jacek.Dabrowski＠selgros.pl 10 Jan '18

10 Jan '18

Hi, Is there plans to add more extension in severity ??? It's good that it should be for example: Warning, Alert, Informational etc. Pozdrawiam Jacek Dąbrowski Koordynator Administratorów IT [cid:image002.jpg@01D38A2D.221DDC20] Transgourmet Polska Sp. z o.o. Zamenhofa 133, 61-131 Poznań, Polska tel.: +48 61 87 42 017 kom.:+48 604 069 933 E-mail: Jacek.Dabrowski(a)selgros.pl www.selgros.pl<http://www.selgros.pl> www.selgros24.pl<http://www.selgros24.pl> www.transgourmet.pl<http://www.transgourmet.pl> Transgourmet Polska Sp. z o.o. jest zarejestrowana w Sądzie Rejonowym Poznań-Nowe Miasto i Wilda w Poznaniu, Wydział VIII Gospodarczy Krajowego Rejestru Sądowego pod nr KRS: 0000045597. NIP: PL 781-10-11-998, REGON 630375413. Wysokość kapitału zakładowego: 310.000.000,00 złotych. Zapraszamy do korzystania z aplikacji HELPDESK<https://horologium>

1 0

error: maximum authentication attempts exceeded for root from 127.0.0.1
by Timothy Illguth 09 Jan '18

09 Jan '18

Hello Observium, Just curious about what this means: Jan 7 06:51:40 mon sshd[4607]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 57494 ssh2 [preauth] Jan 7 06:51:40 mon sshd[4613]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 57496 ssh2 [preauth] Jan 7 12:53:13 mon sshd[2300]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 60920 ssh2 [preauth] Jan 7 12:53:13 mon sshd[2306]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 60922 ssh2 [preauth] Jan 7 18:33:51 mon sshd[18311]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 34286 ssh2 [preauth] Jan 7 18:33:51 mon sshd[18317]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 34288 ssh2 [preauth] Jan 8 00:52:20 mon sshd[30357]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 39526 ssh2 [preauth] Jan 8 00:52:20 mon sshd[30363]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 39528 ssh2 [preauth] Jan 8 06:51:43 mon sshd[350]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 43064 ssh2 [preauth] Jan 8 06:51:43 mon sshd[362]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 43066 ssh2 [preauth] Jan 8 12:54:53 mon sshd[9955]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 46520 ssh2 [preauth] Jan 8 12:54:54 mon sshd[9961]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 46522 ssh2 [preauth] Jan 8 18:34:40 mon sshd[22397]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 48052 ssh2 [preauth] Jan 8 18:34:40 mon sshd[22403]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 48054 ssh2 [preauth] Jan 9 00:33:45 mon sshd[26212]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 51466 ssh2 [preauth] Jan 9 00:33:45 mon sshd[26218]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 51468 ssh2 [preauth] Jan 9 06:52:49 mon sshd[17401]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 56818 ssh2 [preauth] Jan 9 06:52:49 mon sshd[17407]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 56820 ssh2 [preauth] We lost all monitoring about this time, is it possibly related? -- ___________________________ Tim Illguth Jr. Systems Administrator Alaska Satellite Facility (907) 474-7924

3 2

Missing ethernet port when monitoring Synology NAS
by Edwin Dijkstra 09 Jan '18

09 Jan '18

Hi, I'm pretty new on ObserviumJ and could use some help: Added my Synology NAS. Want to monitor also the Network interface, but the only port I see is the loopback IF. Thanks in advance. Regards, Edwin

1 0

Missing EngineID
by Alberto Busso 09 Jan '18

09 Jan '18

Hi all, I am a new user of observium and I am doing some tests with few devices before deploying it on a wider network. When I try to add my first device (with -d option), it only partially works. In the log I have only this error: CMD[/usr/bin/snmpget -v2c -c *** -Pu -OQv -m SNMP-FRAMEWORK-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'172.16.192.102':'161' snmpEngineID.0] CMD EXITCODE[0] CMD RUNTIME[0.0324s] CMD EXITDELAY[10ms] STDOUT[ No Such Object available on this agent at this OID ] SNMP STATUS[FALSE] SNMP ERROR[#1000 - Failed response] So, it seems I am not getting the EngineID object. Then at the end of the log I have this: SQL[INSERT INTO `devices` (`hostname`,`sysName`,`status`,`snmp_community`,`snmp_port`,`snmp_transport`,`snmp_version`,`os`,`snmpEngineID`,`location`,`sysContact`) VALUES ('172.16.192.102','Terlapini RB Sottotetto','1','public','161','udp','v2c','routeros','','Gussago','Elsy')] SQL RUNTIME[0.04079700s] Devices failed: 1. So, it seems that the script will try to add the device but with an empty EngineID field. The result is that the device is added (e.g. I can see it in the device when accessing e.g. via web interface, but when I click on it, it does not show up in the list with a reply that there are no devices matching the search criterias). I also noticed that if I try to add a second device with same EngineID problem, the SQL INSERT will fail with ' duplicate key' error. I have the impression that the EngineID is used as a unique key in the SQL DB and if it is empty this may cause problems. Am I right? In this case, I have to understand why I cannot get the EngineID from the device. Tnx Alberto

2 3

group_id match in Alerts
by Richard Wigzell 09 Jan '18

09 Jan '18

Hello is it possible to match a group of devices in the Alert/Group code from another group as below? [cid:image001.png@01D388CF.02293860] Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

2 2

Re: [Observium] inventory for linux
by Patricio Hernan Besteiro 08 Jan '18

08 Jan '18

Hi Guys, I'm not getting any info about serial numbers on "inventory" from linux boxes, is that feature only for networking devices? thanks tons! Kind regards, Patricio Hernan Besteiro Unix Systems Administrator IBM Client Innovation Center - Buenos Aires - Argentina E-mail: besteiro(a)ar.ibm.com

2 1

Invoices
by Andrew Lemin 08 Jan '18

08 Jan '18

Hi, After we have paid for the subscription, how can we access the traditional invoice for passing to accounts? We have received the email to say the payment has been taken, but need an invoice etc. Thanks, Andy.

3 4

Graphing BIND with multiple views?
by Stephen Fulton 07 Jan '18

07 Jan '18

Hi all, I'm trying to graph BIND stats, which the normal method works well, but in this case the recursive-only server has multiple views configured and the stats returned by RNDC are broken into categories based on views. The Observium "Server Statistics" page looks accurate, but the Resolving and Queries page have almost data recorded (some data in "Errors" and "Incoming Queries" respectively, but not complete in either section). Has anyone dealt with this before? Thanks, -- Stephen

2 3

Re: [Observium] Migration Observium to another IP
by Jacek.Dabrowski＠selgros.pl 05 Jan '18

05 Jan '18

Helps: SELINUX=disabled Pozdrawiam Jacek Dąbrowski Koordynator Administratorów IT [cid:image003.jpg@01D3862A.7D1EDF40] Transgourmet Polska Sp. z o.o. Zamenhofa 133, 61-131 Poznań, Polska tel.: +48 61 87 42 017 kom.:+48 604 069 933 E-mail: Jacek.Dabrowski(a)selgros.pl www.selgros.pl<http://www.selgros.pl> www.selgros24.pl<http://www.selgros24.pl> www.transgourmet.pl<http://www.transgourmet.pl> Transgourmet Polska Sp. z o.o. jest zarejestrowana w Sądzie Rejonowym Poznań-Nowe Miasto i Wilda w Poznaniu, Wydział VIII Gospodarczy Krajowego Rejestru Sądowego pod nr KRS: 0000045597. NIP: PL 781-10-11-998, REGON 630375413. Wysokość kapitału zakładowego: 310.000.000,00 złotych. Zapraszamy do korzystania z aplikacji HELPDESK<https://horologium> From: Dąbrowski Jacek Sent: Friday, January 5, 2018 1:12 PM To: 'Observium' <observium(a)observium.org> Subject: Migration Observium to another IP Hello, I changed the IP address of the Observium server (Centos installation) to another. After reboot I cannot start httpd, can I ask for some hint? [root@observium2 ~]# journalctl -xe -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-31.scope has finished starting up. -- -- The start-up result is done. Jan 05 13:00:02 observium2.poznan.zvni.com systemd[1]: Starting Session 31 of user root. -- Subject: Unit session-31.scope has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-31.scope has begun starting up. Jan 05 13:00:02 observium2.poznan.zvni.com CROND[32599]: (root) CMD ( /opt/observium/discovery.php -h new >> /dev/null 2>&1) Jan 05 13:00:02 observium2.poznan.zvni.com CROND[32600]: (root) CMD ( /opt/observium/poller-wrapper.py 30 >> /dev/null 2>&1) Jan 05 13:00:28 observium2.poznan.zvni.com sudo[2577]: root : TTY=pts/0 ; PWD=/root ; USER=root ; COMMAND=/bin/systemctl start httpd.service Jan 05 13:00:28 observium2.poznan.zvni.com polkitd[667]: Registered Authentication Agent for unix-process:2578:376075 (system bus name :1.91 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, loc Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: Starting The Apache HTTP Server... -- Subject: Unit httpd.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit httpd.service has begun starting up. Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: httpd.service: main process exited, code=exited, status=1/FAILURE Jan 05 13:00:28 observium2.poznan.zvni.com kill[2586]: kill: cannot find process "" Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: httpd.service: control process exited, code=exited status=1 Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: Failed to start The Apache HTTP Server. -- Subject: Unit httpd.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit httpd.service has failed. -- -- The result is failed. Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: Unit httpd.service entered failed state. Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: httpd.service failed. Jan 05 13:00:28 observium2.poznan.zvni.com polkitd[667]: Unregistered Authentication Agent for unix-process:2578:376075 (system bus name :1.91, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus) Jan 05 13:01:01 observium2.poznan.zvni.com systemd[1]: Started Session 32 of user root. -- Subject: Unit session-32.scope has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-32.scope has finished starting up. -- -- The start-up result is done. Jan 05 13:01:01 observium2.poznan.zvni.com systemd[1]: Starting Session 32 of user root. -- Subject: Unit session-32.scope has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-32.scope has begun starting up. Jan 05 13:01:01 observium2.poznan.zvni.com CROND[2593]: (root) CMD (run-parts /etc/cron.hourly) Jan 05 13:01:01 observium2.poznan.zvni.com run-parts(/etc/cron.hourly)[2596]: starting 0anacron Jan 05 13:01:01 observium2.poznan.zvni.com run-parts(/etc/cron.hourly)[2602]: finished 0anacron Jan 05 13:01:54 observium2.poznan.zvni.com sudo[2604]: root : TTY=pts/0 ; PWD=/root ; USER=root ; COMMAND=/bin/systemctl restart httpd.service Jan 05 13:01:54 observium2.poznan.zvni.com polkitd[667]: Registered Authentication Agent for unix-process:2605:384632 (system bus name :1.94 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, loc Jan 05 13:01:54 observium2.poznan.zvni.com systemd[1]: Starting The Apache HTTP Server... -- Subject: Unit httpd.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit httpd.service has begun starting up. Jan 05 13:01:54 observium2.poznan.zvni.com systemd[1]: httpd.service: main process exited, code=exited, status=1/FAILURE Jan 05 13:01:54 observium2.poznan.zvni.com kill[2612]: kill: cannot find process "" Jan 05 13:01:54 observium2.poznan.zvni.com systemd[1]: httpd.service: control process exited, code=exited status=1 Jan 05 13:01:54 observium2.poznan.zvni.com systemd[1]: Failed to start The Apache HTTP Server. -- Subject: Unit httpd.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit httpd.service has failed. Pozdrawiam Jacek Dąbrowski Koordynator Administratorów IT [cid:image004.jpg@01D3862A.7D1EDF40] Transgourmet Polska Sp. z o.o. Zamenhofa 133, 61-131 Poznań, Polska tel.: +48 61 87 42 017 kom.:+48 604 069 933 E-mail: Jacek.Dabrowski(a)selgros.pl<mailto:Jacek.Dabrowski@selgros.pl> www.selgros.pl<http://www.selgros.pl> www.selgros24.pl<http://www.selgros24.pl> www.transgourmet.pl<http://www.transgourmet.pl> Transgourmet Polska Sp. z o.o. jest zarejestrowana w Sądzie Rejonowym Poznań-Nowe Miasto i Wilda w Poznaniu, Wydział VIII Gospodarczy Krajowego Rejestru Sądowego pod nr KRS: 0000045597. NIP: PL 781-10-11-998, REGON 630375413. Wysokość kapitału zakładowego: 310.000.000,00 złotych. Zapraszamy do korzystania z aplikacji HELPDESK<https://horologium>

1 0

Migration Observium to another IP
by Jacek.Dabrowski＠selgros.pl 05 Jan '18

05 Jan '18

Hello, I changed the IP address of the Observium server (Centos installation) to another. After reboot I cannot start httpd, can I ask for some hint? [root@observium2 ~]# journalctl -xe -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-31.scope has finished starting up. -- -- The start-up result is done. Jan 05 13:00:02 observium2.poznan.zvni.com systemd[1]: Starting Session 31 of user root. -- Subject: Unit session-31.scope has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-31.scope has begun starting up. Jan 05 13:00:02 observium2.poznan.zvni.com CROND[32599]: (root) CMD ( /opt/observium/discovery.php -h new >> /dev/null 2>&1) Jan 05 13:00:02 observium2.poznan.zvni.com CROND[32600]: (root) CMD ( /opt/observium/poller-wrapper.py 30 >> /dev/null 2>&1) Jan 05 13:00:28 observium2.poznan.zvni.com sudo[2577]: root : TTY=pts/0 ; PWD=/root ; USER=root ; COMMAND=/bin/systemctl start httpd.service Jan 05 13:00:28 observium2.poznan.zvni.com polkitd[667]: Registered Authentication Agent for unix-process:2578:376075 (system bus name :1.91 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, loc Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: Starting The Apache HTTP Server... -- Subject: Unit httpd.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit httpd.service has begun starting up. Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: httpd.service: main process exited, code=exited, status=1/FAILURE Jan 05 13:00:28 observium2.poznan.zvni.com kill[2586]: kill: cannot find process "" Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: httpd.service: control process exited, code=exited status=1 Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: Failed to start The Apache HTTP Server. -- Subject: Unit httpd.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit httpd.service has failed. -- -- The result is failed. Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: Unit httpd.service entered failed state. Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: httpd.service failed. Jan 05 13:00:28 observium2.poznan.zvni.com polkitd[667]: Unregistered Authentication Agent for unix-process:2578:376075 (system bus name :1.91, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus) Jan 05 13:01:01 observium2.poznan.zvni.com systemd[1]: Started Session 32 of user root. -- Subject: Unit session-32.scope has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-32.scope has finished starting up. -- -- The start-up result is done. Jan 05 13:01:01 observium2.poznan.zvni.com systemd[1]: Starting Session 32 of user root. -- Subject: Unit session-32.scope has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-32.scope has begun starting up. Jan 05 13:01:01 observium2.poznan.zvni.com CROND[2593]: (root) CMD (run-parts /etc/cron.hourly) Jan 05 13:01:01 observium2.poznan.zvni.com run-parts(/etc/cron.hourly)[2596]: starting 0anacron Jan 05 13:01:01 observium2.poznan.zvni.com run-parts(/etc/cron.hourly)[2602]: finished 0anacron Jan 05 13:01:54 observium2.poznan.zvni.com sudo[2604]: root : TTY=pts/0 ; PWD=/root ; USER=root ; COMMAND=/bin/systemctl restart httpd.service Jan 05 13:01:54 observium2.poznan.zvni.com polkitd[667]: Registered Authentication Agent for unix-process:2605:384632 (system bus name :1.94 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, loc Jan 05 13:01:54 observium2.poznan.zvni.com systemd[1]: Starting The Apache HTTP Server... -- Subject: Unit httpd.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit httpd.service has begun starting up. Jan 05 13:01:54 observium2.poznan.zvni.com systemd[1]: httpd.service: main process exited, code=exited, status=1/FAILURE Jan 05 13:01:54 observium2.poznan.zvni.com kill[2612]: kill: cannot find process "" Jan 05 13:01:54 observium2.poznan.zvni.com systemd[1]: httpd.service: control process exited, code=exited status=1 Jan 05 13:01:54 observium2.poznan.zvni.com systemd[1]: Failed to start The Apache HTTP Server. -- Subject: Unit httpd.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit httpd.service has failed. Pozdrawiam Jacek Dąbrowski Koordynator Administratorów IT [cid:image003.jpg@01D38626.BBCB2BD0] Transgourmet Polska Sp. z o.o. Zamenhofa 133, 61-131 Poznań, Polska tel.: +48 61 87 42 017 kom.:+48 604 069 933 E-mail: Jacek.Dabrowski(a)selgros.pl www.selgros.pl<http://www.selgros.pl> www.selgros24.pl<http://www.selgros24.pl> www.transgourmet.pl<http://www.transgourmet.pl> Transgourmet Polska Sp. z o.o. jest zarejestrowana w Sądzie Rejonowym Poznań-Nowe Miasto i Wilda w Poznaniu, Wydział VIII Gospodarczy Krajowego Rejestru Sądowego pod nr KRS: 0000045597. NIP: PL 781-10-11-998, REGON 630375413. Wysokość kapitału zakładowego: 310.000.000,00 złotych. Zapraszamy do korzystania z aplikacji HELPDESK<https://horologium>

1 0

Professional SVN updates failing
by Stephen Fulton 05 Jan '18

05 Jan '18

I have two separate instances of Observium Professional running at separate organizations and both have seen attempts to update using SVN fail over the last few days. user@host:/home/user# cd /opt/observium user@host:/opt/observium# svn update Updating '.': Authentication realm: <http://svn.observium.org:80> Observium Professional Repository Password for 'root': ^Csvn: E200015: Unable to connect to a repository at URL 'http://svn.observium.org/svn/observium/branches/stable' svn: E200015: The operation was interrupted user@host:/opt/observium# I do not believe either subscription has lapsed (the date for each is later in the year IIRC). Any ideas what is going on? -- Stephen

12 25

LDAP/AD nested groups
by Richard Wigzell 04 Jan '18

04 Jan '18

Hello, we are running Observium Pro with the following and nested AD group enumeration does not seem to be working. [cid:image002.png@01D3856C.B5B0A050] We have it enabled in the config.php but only Users in the top level groups specified in the config['auth_ldap_group'] array show up, if put a group with users into one of the groups in config['auth_ldap_group'] then nothing. Enabled in config with twice the depth needed. $config['auth_ldap_recursive'] = TRUE; $config['auth_ldap_recursive_maxdepth'] = 6; Any suggestions would be useful. [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

Re: [Observium] HSRP event tracking
by Pedersen, Sean 04 Jan '18

04 Jan '18

I don't believe there is an HSRP tracker. It's definitely not in the sensor entity type. Sensors are things like current, dBm, fan speed, power, state, temperature, voltage, etc. There's a list of known metrics and attributes here: http://www.observium.org/wiki/Alerting_Metrics_and_Attributes Examples of values can be found in your MySQL database. From: <Pedrosi>, "Derek G." <pedrosi(a)millercanfield.com<mailto:pedrosi@millercanfield.com>> Reply-To: "Observium Network Observation System (observium(a)observium.org<mailto:observium@observium.org>)" <observium(a)observium.org<mailto:observium@observium.org>> Date: Tuesday, November 18, 2014 at 12:14 PM To: "Observium Network Observation System (observium(a)observium.org<mailto:observium@observium.org>)" <observium(a)observium.org<mailto:observium@observium.org>> Subject: [Observium] HSRP event tracking Is there a way to add a checker for Cisco HSRP events? >From CISCO-HSRP-MIB... HsrpState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The current state of the HSRP protocol for a given HSRP group entry." SYNTAX INTEGER { initial(1), learn(2), listen(3), speak(4), standby(5), active(6) } This does not work... [cid:image003.jpg@01D0033A.077E5250] Regards, derek Subscriber v14.11.5987 Founded in 2007, IO is a worldwide leader in software defined data center technology, services and solutions that enable businesses and governments to intelligently control their information. The communication contained in this e-mail is confidential and is intended only for the named recipient(s) and may contain information that is privileged, proprietary, attorney work product or exempt from disclosure under applicable law. If you have received this message in error, or are not the named recipient(s), please note that any form of distribution, copying or use of this communication or the information in it is strictly prohibited and may be unlawful. Please immediately notify the sender of the error, and delete this communication including any attached files from your system. Thank you for your cooperation.

8 8

Re: [Observium] Observium data mapping
by Markus Klock 03 Jan '18

03 Jan '18

Some of the data is easy to pull via the API: http://docs.observium.org/api/ The database is not documented as far as I know /Markus Den 3 jan. 2018 13:26 skrev "Martin Davis" <martin(a)zarrdia.com>: Hi we are looking to pull various pieces of information from the underlying observium database with respect to the network components we are monitoring. Looking to find out if someone can point us in the right direction with respect to some documentation detailing the layout of the DB and commentary on the associated tables / fields, or a data dictionary. Kind regards, Martin. _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Observium data mapping
by Martin Davis 03 Jan '18

03 Jan '18

Hi we are looking to pull various pieces of information from the underlying observium database with respect to the network components we are monitoring. Looking to find out if someone can point us in the right direction with respect to some documentation detailing the layout of the DB and commentary on the associated tables / fields, or a data dictionary. Kind regards, Martin.

1 0

Alerts on Aggregate values or sums?
by Darrell Budic 02 Jan '18

02 Jan '18

Bit of an RFE here, would like to be able to alert on the aggregate value for a group, or do sums in the alert checker test field, unless I’m just missing how to do this? My particular use check is adding up the total power for a 3 phase PDU (and a group for the power panel), and alerting if the total watts or amps are greater than 80% of the circuit capacity. Total Power Output on my APC 3 phase PDUs doesn’t work for me here because it’s dependent on the power factor of the connected devices, and that isn’t readily available in observium. Even if it was, I’d still need math (division this time) on two values. Sums/aggregates seem like the easiest route for this task. Thanks, -Darrell

2 1

multi device graph for sensors?
by Darrell Budic 02 Jan '18

02 Jan '18

Is there a way to get a summary (and sum) of a particular sensor? I’d like to have a one graph for all my PDUs with the apower attribute summed up for a total, see what the absolute # is. -Darrell

4 11

Alert chekers entites 'disapearing'
by Edvinas K 28 Dec '17

28 Dec '17

Hello, I've created alarm checker: os equals nxos hostname match *NET* ifType equals ethernetCsmacd ifAlias match *vPC Keep-alive link* And after a while i noticed that some entities where disapeared. The device was reachable and etc. I did a "rebuild' and they're reappeared again. What could be the cause ? NXOS ? :)

5 14

Re: [Observium] Collecting snmp traps with Observium
by Gustav Ulander 23 Dec '17

23 Dec '17

Hello. We would like to collect snmp traps from our routers and use them for alerting. However i cant find a way to do it? Has someone managed to get this to work? We are trying to get alerting to work with IS-IS neighbor up and down and so on. Best regards. //Gustav

3 5

false positive NX-OS alert ?
by Edvinas K 23 Dec '17

23 Dec '17

[image: Inline image 1] Hello, Is there any explanation - why this alert came up ? >From device sensors info now i see this information: [image: Inline image 2] The NX-OS stack (again) sent wrong condition information and alert generated by the "greater than 0" rule ? Is there are the way to minimaze these false positives ? Thank you.

2 2

HP J8992A Switch 6200yl-24G
by Fred Sharpsteen 22 Dec '17

22 Dec '17

We are using Observium to help support or local schools and we have a district that is using an HPJ8992A Switch 6200yl-24G, firmware K.15.16.0006. This switch is lacking many details in Observium the first and biggest one is the Port details. No Ports are showing on this switch.

4 6

LLDP huawei
by Jan Peters 21 Dec '17

21 Dec '17

Hi everybody, I'm testing observium community edition with our new huawei-switches: S5720-52X-PWR-SI-AC S6720-30C-EI-24S-AC CE6855-48T6Q-HI observium is working well, with a lot of informations! thx for that! But the LLDP will not shown in the port section. Is there a support for LLDP huawei switches in the pro-version of observium? Another question: http://postman.memetic.org/pipermail/observium/ The archive will not be displayed: You don't have permission to access /pipermail/observium/ on this server. Best regards Peter

1 0

accessing API and inventory API
by Edvinas K 20 Dec '17

20 Dec '17

Hello, We're using professional edition and started using API. I enabled basic API and Inventory API in config.php. But don't know how to access the Inventory API ? Didn't saw it in API instructions Page. Can you help ? Thank you.

2 2

NetFlow Recommendation
by Oludayo Oyediran 20 Dec '17

20 Dec '17

Afternoon All, We recently purchased Observium after a recommendation from our Network Engineer, what Netflow software would you recommend to use alongside Observium? If you know any Open Source ones, that'd be awesome. I came across Nfsen but it's a tad too old. Also I have Observium talking to 6 out of 8 of my routers and SNMP is turned on on all of them. If you require any info please let me know. There are 7 Cisco x 1 Juniper routers and the affected routers are Cisco. Regards, Oludayo Oyediran I IT Operations Officer e ooyediran(a)jjoconnor.com.au<mailto:ooyediran@jjoconnor.com.au> t 03 5382 1727 423 Western Highway | Horsham Victoria 3402 www.oconnorscaseih.com.au<http://www.oconnorscaseih.com.au/> This communication may contain confidential or copyright information of JJ O'Connor & Sons Pty Ltd (ABN 33 005 242 142). If you are not an intended recipient, you must not keep, forward, copy, use, save or rely on this communication, and any such action is unauthorised and prohibited. If you have received this communication in error, please reply to this email to notify the sender of its incorrect delivery, and then delete both it and your reply. -- Message protected by MailGuard: e-mail anti-virus, anti-spam and content filtering. http://www.mailguard.com.au

5 4

Syslog Alerts
by Peter Derissen 20 Dec '17

20 Dec '17

Hello, Im trying to set up some syslog alerts in observium. 1 want to have 3 up and 3 down alerts. Any Idea? /ifOperStatus down/ works just fine. /ifOperStatus down(2), ifName ae/ Not working /ifOperStatus down(2), ifName xe/ Not working /ifOperStatus down(2), ifName ge/ Not working Gr Peter ******** IMPORTANT NOTICE ******** This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system. Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof. Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01.

2 3

Multi year history
by Attila Nagy 19 Dec '17

19 Dec '17

Hi everyone! I was wondering about whether there is a recommended/approved/tested/tolerated way or plan of creating multi-year history (RRD data)? To reformulate it, changing the day/week/month/year history into something like day/week/month/year/10years... It's not a show-stopper, but sometimes there is demand to show or analyze historical data for more than 1 year in the past. Regards, Tylla

3 7

Re: [Observium] Aggregate graphs are limited to 349 ports
by Markus Klock 18 Dec '17

18 Dec '17

Hi, this is possible by making a port group. There is No limit there I Think /Markus Den 18 dec. 2017 20:31 skrev "Richard Wigzell" <richard.wigzell(a)it.ox.ac.uk >: Hello, is this configurable? We would like to be able to see aggragte throughput for a number of our networks but the port count for the selection is more than 349. [image: cid:image001.jpg@01CE9215.D39244B0] <https://www.it.ox.ac.uk/> *Richard Wigzell* Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN *T:* 01865 616282 www.it.ox.ac.uk _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Aggregate graphs are limited to 349 ports
by Richard Wigzell 18 Dec '17

18 Dec '17

Hello, is this configurable? We would like to be able to see aggragte throughput for a number of our networks but the port count for the selection is more than 349. [cid:image001.png@01D37836.9C729B40] [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

"Access to outside localnet is blocked "
by Edvinas K 18 Dec '17

18 Dec '17

Hello, >From 11/30 in observium.log i started to see these messages: "[2017/12/13 10:14:05 +0000] alerter.php(9571): get_http_request() exit with timeout. Access to outside localnet is blocked by firewall or network problems. Check proxy settings. [2017/12/13 11:33:16 +0000] discovery.php(24209): get_http_request() exit with timeout. Access to outside localnet is blocked by firewall or network problems. Check proxy settings." what could cause that ? Thanks

2 1

[QUESTION] Alerting Different Group and Devices
by San Rollheiser 16 Dec '17

16 Dec '17

Hi, i have a problem with the Alerts, in the first case i dont recieve the emails alerts, after the update my alerts never send to my email. But before the update the emails alerting work fine... But my principal problem is the alerting notifications via email or slack or sms to differents groups and devices... Ex: I have 3 clients this clients have 50 devices each one... I need send only the alerts related for each clients devices not for all devices. This is possible? Thx. BR Santiago

4 5

Multiple AD authentication
by Richard Wigzell 15 Dec '17

15 Dec '17

Hi, is it possible to configure Observium to authenticate against multiple Active Directorys? We have Pro and would like users from two ADs to be able to use it. Regards Rw

3 2

UNIX Agent graph history
by Attila Nagy 14 Dec '17

14 Dec '17

Hi everyone! We are using the CE version (17.9.0) so ignore my e-mail if this is already solved in the Pro edition. We started to configure the UNIX agent on a few of our machines and we saw that all the pop-up graphs in the Apps overviews are only showing the last 24 hours. Is this on purpose? Isn't there some possibility to make these graphs show the usual way (day, week, month, year)? Regards, Tylla

2 2

Netonix MIB
by Travis Garrison 14 Dec '17

14 Dec '17

We noticed in the changelog that Netonix MIB was added. We have a Netonix switch but it was discovered as a generic device. We looked at the MIB list but we do not see the Netonix MIB in the list. Do we need to do anything special? Netonix WS-8-150-AC Observium 17.11.8942 (rolling) Thank you Travis

5 9

WMI Timeout option
by Richard Wigzell 11 Dec '17

11 Dec '17

Hello, is there a config option to set the WMI connection timeout? Thanks. [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

logical OR/AND matching Devices, Entities
by Edvinas K 11 Dec '17

11 Dec '17

Hello, Is it possible in Alert checker under the same field to add value with logical OR, for example: Under "Device Match" - group includes Nexus|ASRS|ISR and the same question on Entity match. Thanks

2 1

Re: [Observium] Netapp
by Youssef BENGELLOUN - ZAHR 11 Dec '17

11 Dec '17

2 3

Netapp
by Jacek.Dabrowski＠selgros.pl 11 Dec '17

11 Dec '17

Hello, I was added a Netapp storage to observium but is recognized as a generic device. Netapp model 2800 It's someone add any storage to observium? Observium version at revision 8986 Pozdrawiam Jacek Dąbrowski Koordynator Administratorów IT [cid:image001.jpg@01D37281.AEEC3660] Transgourmet Polska Sp. z o.o. Zamenhofa 133, 61-131 Poznań, Polska tel.: +48 61 87 42 017 kom.:+48 604 069 933 E-mail: Jacek.Dabrowski(a)selgros.pl www.selgros.pl<http://www.selgros.pl> www.selgros24.pl<http://www.selgros24.pl> www.transgourmet.pl<http://www.transgourmet.pl> Transgourmet Polska Sp. z o.o. jest zarejestrowana w Sądzie Rejonowym Poznań-Nowe Miasto i Wilda w Poznaniu, Wydział VIII Gospodarczy Krajowego Rejestru Sądowego pod nr KRS: 0000045597. NIP: PL 781-10-11-998, REGON 630375413. Wysokość kapitału zakładowego: 310.000.000,00 złotych. Zapraszamy do korzystania z aplikacji HELPDESK<https://horologium>

2 1

Problem with special characters on device descriptions / snmp location etc...
by Javier Valero 11 Dec '17

11 Dec '17

Hello We are using Observium CE as part of our monitoring systems at IslaLink / OranLink. A few weeks ago, we updated to the last CE version (17.9.0). Since then, we are experiencing problems with the interface descriptions that may contain some especial characters like “áóéñ…”. It also happens with the SNMP location string. Seems that this was an old bug that was already solved: Observium OBS-1396 UTF-8/ISO characters fail in SNMP location This is causing some events flood, and incorrect display. I attach some captures: [cid:image001.png@01D35C8C.F9C1C980][cid:image002.png@01D35C8C.F9C1C980] We tried to remove all special characters, but sometimes it’s not possible or easy. May this bug have emerged again? Thank you. Best regards. [IslaLink, BalaLink, OranLink] Javier Valero Coordinador Molino de las fuentes S/N, 46026 Valencia - Spain Teléfono: +34 96 373 20 06 Móvil: +34 619 53 77 44 Este mensaje electrónico y cualquier documento que pueda llevar adjunto, es para uso exclusivo de su/s destinatario/s, pudiendo contener información protegida y/o confidencial. Si recibe este mensaje por error, le agradeceremos que se lo comunique inmediatamente a su remitente por correo electrónico y lo elimine de su ordenador, destruyendo toda copia del mismo. Muchas gracias.

2 10

Syslog Alert log Message length
by Richard Wigzell 11 Dec '17

11 Dec '17

Hello, could the Syslog Alert log Message length be increased, it's not long enough for the messages we are capturing. Many thanks [cid:image001.png@01D37259.75D4C310] [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

How do I correct this time discrepancy?
by Joe Brouillette 08 Dec '17

08 Dec '17

How do I fix the time discrepancy between my Observium server and the Observium UI? Please see the attached screenshot. The time on my server is correct but the time displayed on the UI is off by an hour. Also, the "Uptime" shown on the attached screenshot shows "Down 8h 4m 59s." I checked the graph for this server and I see no downtime. Thanks, Joe Brouillette Computer Systems Specialist Link Transit 509.664.7643 jobee(a)linktransit.com<mailto:jobee@linktransit.com>

2 2

Stacked and combined line graphs breaks after upgrading to 8889 stable
by Jesper Frank Nemholt 07 Dec '17

07 Dec '17

Hi! Upgraded and now it breaks the stacked and combined line graphs. The individual graphs themselves are OK. It seems to be across the board on all combined graphs and not specific to the example attached (custom OIDs for EMC Isilon) /Jesper

3 11

Fwd: FW: ALERT: [jaynet01a] [port] [Ethernet1/16] MoreThan80PortUtilizationOUT
by Edvinas K 07 Dec '17

07 Dec '17

Sometimes: when pressing on Alert Link, im getting: Unfortunately, this alert entry id does not seem to exist in the database! What could cause this ? Something with DB ? How to troubleshoot it ? Thanks *ALERT* Modify <http://netmon.adform.zone/device/device=223/tab=alert/alert_entry=261590/> *Alert* *MoreThan80PortUtilizationOUT* *Entity* *Ethernet1/16 <http://netmon.adform.zone/device/device=223/tab=port/port=344789/>* *Descr* FEX130A *Conditions* ifOutOctets_perc ge 80 (91) ifOutOctets_perc lt 100 (91) *Metrics* ifOutOctets_perc = 91 *Duration* 16m 3s (2017-12-06 14:46:35) Device *Device* *N <http://netmon.adform.zone/device/device=223/>exus01A* *Hardware* N5K-C5548UP *Operating System* Cisco NX-OS 6.0(2)N2(4) uk9 *Location* , Denmark *Uptime* 1 year, 28 days, 2h 49m 40s port_percent <http://netmon.adform.zone/graph.php?type=port_percent&id=344789> Observium Professional 17.11.8960 <http://www.observium.org>

1 0

Fwd: "sensor_class equals power" doesnt list a Nexus devices
by Edvinas K 07 Dec '17

07 Dec '17

Hello, I've created the Alert Checker with "sensor_class equals power" But i don't see any info about Nexus devices transceiver information. But for example - IOS XR devices shows transceiver information. Is it a problem wih NX-OS snmp stack ? Thanks.

1 0

Device names in Eventlog and Syslog Alerts.
by Peter Derissen 06 Dec '17

06 Dec '17

Hi, I noticed that some (longer) device names aren't showing complete in the eventlog and syslog alerts. Can i fix this some how? Also, is there a possibility to add colors (red,green) to the syslog alerts? Some screen shots. [cid:image003.png@01D36DEA.45D66650] [cid:image004.png@01D36DEA.45D66650] Regards, Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening]<http://www.eurofiber.nl/> Volg ons op Twitter<https://twitter.com/Eurofiber> | Linkedin<https://www.linkedin.com/company/eurofiber> | Youtube<https://www.youtube.com/user/Eurofibergroup> [cid:image002.png@01D225FF.7ECDA420]<http://bit.ly/2eaBgRh> ******** IMPORTANT NOTICE ******** This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system. Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof. Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01.

4 10

Ekinops pre/post FEC Error counters
by Jay Hanke 05 Dec '17

05 Dec '17

Is anyone using Observium to monitor Ekinops DWDM error counters? Jay

2 2

Aggregate vs individual port graph maximum value & 95th % on bits graph
by Sean Pedersen 04 Dec '17

04 Dec '17

I have two graph questions that I haven't been able to get an answer on via IRC, so I thought this might be easier since I can include more information up front: 1st Question: A 2-port aggregate graph (agg_bits.png) shows a maximum value based on :AVERAGE while individual port graphs (port1_bits.png, port2_bits.png) for the ports that make up the aggregate show a maximum value based on :MAX. Is this intentional? If not, would it be possible to remove or toggle graphing average vs. maximum data on individual port graphs? I think both data points are useful, but in general when providing graphs the 5-minute average the only data we'd want to show them. More data below. 2nd Question: The "bits_old" graph includes 95th % both graphed and in the legend. Would it be possible to get the same for the other bits graphs, or at minimum, just bits? I did some digging and didn't find a means to use options via graphs.php to generate it myself. Question 1 data: An aggregate graph (bits) takes the :AVERAGE inbound and outbound of the two ports, using that data to create the graph and populate the legend (min/max/avg, etc.): DEF:in0=/opt/observium/rrd/dce01.01.mmr01/port-10.rrd:INOCTETS:AVERAGE DEF:out0=/opt/observium/rrd/dce01.01.mmr01/port-10.rrd:OUTOCTETS:AVERAGE DEF:in1=/opt/observium/rrd/dce02.01.mmr02/port-10.rrd:INOCTETS:AVERAGE DEF:out1=/opt/observium/rrd/dce02.01.mmr02/port-10.rrd:OUTOCTETS:AVERAGE The individual ports use both :AVERAGE and :MAX. DEF:outoctets=/opt/observium/rrd/dce01.01.mmr02/port-10.rrd:OUTOCTETS:AVERAG E DEF:inoctets=/opt/observium/rrd/dce01.01.mmr02/port-10.rrd:INOCTETS:AVERAGE DEF:outoctets_max=/opt/observium/rrd/dce01.01.mmr02/port-10.rrd:OUTOCTETS:MA X DEF:inoctets_max=/opt/observium/rrd/dce01.01.mmr02/port-10.rrd:INOCTETS:MAX (I didn't include all the CDEFs, AREAS, HRULES, etc. for brevity, but I have copies of each RRD command for reference, if needed.) The "Max" value in the legend reflects the :AVERAGE-based maximum on the aggregate graph and the :MAX-based maximum on the individual graph. Because of this, when compared side-by-side, the values do not match. Aggregate Max: p1_in: 118.25Mb p1_out: 31.95Mb p2_in: 40.15Mb p2_out: 2.61Mb Port 1 Max: p1_in: 304.39Mb p1_out: 98.77Mb Port 2 Max: p2_in: 90.94Mb p2_out: 14.05Mb -- Thanks, skpio

3 10

Seeing this because these two printers are talking to each other? (see pic)
by Kelley, Ronald E. 04 Dec '17

04 Dec '17

[cid:image001.png@01D36CDB.DD38EF50] Ronald Kelley Houston Methodist. Leading Medicine. Houston Methodist is ranked by U.S. News & World Report as the No. 1 hospital in Texas for patient care. Houston Methodist is nationally ranked in 8 specialties and is designated as a Magnet hospital for excellence in nursing. Visit us at houstonmethodist.org. Follow us at twitter.com/MethodistHosp and facebook.com/HoustonMethodist. ***CONFIDENTIALITY NOTICE*** This e-mail is the property of Houston Methodist and/or its relevant affiliates and may contain restricted and privileged material for the sole use of the intended recipient(s). Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender and delete all copies of the message. Thank you.

2 1

Observium Hardware requirements
by Juan Camilo 04 Dec '17

04 Dec '17

Hi Friends, My company has a PRO Subscription and we plan to implement Observium horizontally: - Dedicated MySQL DB - Dedicated RRD and web interface - Main Poller - Maybe Poller #2 We need your advice about hardware requirements to poll ~2500 devices and ~100.000 ports. Thanks, Juan Camilo Villamil B. Ingeniero Innovación Y Desarrollo Tic juan.villamil <mailto:juan.villamil@sti.com.co> @sti.com.co (+57 1) 7429797 Ext: 60181 Carrera 13 A No. 89-38 oficina 337 <http://www.stisas.com.co/> http://www.stisas.com.co

4 3

Ciena SAOS thresholds using incorrect OIDs
by Erik Muller 03 Dec '17

03 Dec '17

We recently added some Ciena 3942s and 3904s to our monitoring, and found that Observium (CE 17.9.8859) is picking up the wrong OID for some sensors. It seems that the same OID was reused for a couple of checks where they should have been the next in sequence, causing optics Tx power and voltage to not be properly checked. The below change syncs the checks with the correct MIB values, and fixed the false alarms it was generating for us. thanks, -e admin@nms:~$ diff -ub /opt/observium/includes/discovery/sensors/wwp-leos-port-xcvr-mib.inc.php.orig /opt/observium/includes/discovery/sensors/wwp-leos-port-xcvr-mib.inc.php --- /opt/observium/includes/discovery/sensors/wwp-leos-port-xcvr-mib.inc.php.orig 2017-02-01 11:31:13.983653739 -0500 +++ /opt/observium/includes/discovery/sensors/wwp-leos-port-xcvr-mib.inc.php 2017-02-01 15:39:05.687844414 -0500 @@ -59,7 +59,7 @@ foreach ($oids as $index => $entry) { $entry['descr'] = dbFetchCell("SELECT `ifDescr` FROM `ports` WHERE `device_id` = ? AND `ifName` = ?", array($device['device_id'], $index)) . " Tx power"; - $entry['oid'] = ".1.3.6.1.4.1.6141.2.60.4.1.1.1.1.105." . $index; + $entry['oid'] = ".1.3.6.1.4.1.6141.2.60.4.1.1.1.1.106." . $index; $entry['current'] = $entry['wwpLeosPortXcvrTxDbmPower']; $options = array('limit_high' => $entry['wwpLeosPortXcvrHighTxDbmPwAlarmThreshold'] * $scale, 'limit_low' => $entry['wwpLeosPortXcvrLowTxDbmPwAlarmThreshold'] * $scale, @@ -101,7 +101,7 @@ foreach ($oids as $index => $entry) { $entry['descr'] = dbFetchCell("SELECT ifDescr FROM `ports` WHERE `device_id` = ? AND `ifName` = ?", array($device['device_id'], $index)) . " Volts"; - $entry['oid'] = ".1.3.6.1.4.1.6141.2.60.4.1.1.1.1.16.".$index; + $entry['oid'] = ".1.3.6.1.4.1.6141.2.60.4.1.1.1.1.17.".$index; $entry['current'] = $entry['wwpLeosPortXcvrVcc']; $options = array('limit_high' => $entry['wwpLeosPortXcvrHighVccAlarmThreshold'], 'limit_low' => $entry['wwpLeosPortXcvrLowVccAlarmThreshold'],

2 1

Distributed-remote poĺlers (again)
by Edvinas K 30 Nov '17

30 Nov '17

Hello, I would like to know if there any plans or solutions to make Observium run in distributed poller setup ? Thanks

5 9

Alerts for an APC UPS
by Tim Vaughan 30 Nov '17

30 Nov '17

I want to generate alerts from our APC UPS. Mostly I want to be alerted it if goes onto battery backup power or if the battery needs replacing. Are these alertable? If so, does anyone have any example alert checkers they could share? Cheers, Tim

3 5

Grouping both ends of Core P2P links into single Graph
by Andrew Lemin 30 Nov '17

30 Nov '17

Hi, We are evaluating Observium at the moment, and we have many point-to-point links in our WAN as everyone should ;) Each end of the same p2p link is labeled to be identical; interface Te1/1/1 description CORE:DeviceA=DeviceB This results in two graphs in Observium. One for DeviceA (labelled "CORE:DeviceA=DeviceB") and one for DeviceB (labelled "CORE:DeviceA=DeviceB"). However as they are connected back-to-back to each other they show the exact same information (just "in" and "out" reversed obviously). Is it possible to merge these two ports/graphs into a single logical Core link? This would significantly save on screen real estate (halving the Core page at the least) and make tracing paths through the network much more logical. Similar to how the Customer graphs aggregate multiple ports with the same description together. But I guess throwing away one side of the link maybe? Details for each end could still be seen on the specific device's page to view locally significant things like port errors etc Thanks, Andy.

6 18

link dlink - hp lldp
by Raimundas Šlepikas 29 Nov '17

29 Nov '17

Hello 'Observium', why this link is not working, can you help me ? :) DGS-3120 to HP2610 -- Best regards, Raimundas mailto:raimis@kis.lt

4 4

Port Errors on Dashboard
by Travis Garrison 29 Nov '17

29 Nov '17

Is there a way to disable port errors on the dashboard for only our wireless radios? We would like to keep the errors of any switch ports that we might have. Thank you Travis Garrison

3 2

Removing some devices from eventlog
by Edvinas K 29 Nov '17

29 Nov '17

Hello, Is it possible to remove some devices from eventlog ?

1 0

Connecting to devices from Observium
by Mal Evans 28 Nov '17

28 Nov '17

Hi all - I've noticed that some of my devices display an option to connect directly via SSH etc. as per attached screenshot but unfortunately not all devices provide this option. I presume this is device dependent since it appears that my Cisco & Mikrotik devices display this option but not Huawei or my Brocade switches Is this an Observium config or device based? And if device based what config is required. Cheers Mal

2 1

Huawei Sub-interfaces - no traffic captured
by Mal Evans 27 Nov '17

27 Nov '17

Hi all - I've recently migrated a number of services to new Huawei kit and successfully discovered the device and all sub-interfaces etc. My problem is that Observium is not showing any traffic against any of the sub-interfaces. I can see the aggregated traffic fine but not at the sub interface level. I don't have the same problem on my older Cisco h/w Would appreciate any feedback on how to troubleshoot. Mal

2 1

device migration from SNMPv2 to SNMPv3
by Jan Horacek 22 Nov '17

22 Nov '17

Hi, I have a one question regarding migration devices in Observium from SNMPv2 to SNMPv3. I have in the Observium in this moment around 300 devices and want to use SNMPv3 instead of current SNMPv2c. Is here any procedure how I can do bulk change in Observium instead of removing and adding devices or do it manually? Thanks Jan

2 1

How to trigger of checkpoint FW state in observium?
by Steve Costaras 22 Nov '17

22 Nov '17

We're running observium pro stable release 17.10.8930 and are monitoring several checkpoint firewalls with it. I'm trying to figure out how to generate an alert when the firewalls fail over or when a state change occurs. I see that it's being polled as it's displayed for the device header. as you can see attached. This comes from checkpoint from the 1.3.6.1.4.1.2620.1.5.6.0 OID: SNMPv2-SMI::enterprises.2620.1.5.6.0 = STRING: "active" But I don't see any method to select that as an entity type? Anyone have any pointers?

3 2

some temperature sensor values are missing
by Edvinas K 22 Nov '17

22 Nov '17

Hello, Could you tell me why some FEXes temperature thresholds are missing ? Thanks [image: Inline image 2]

3 2

unable to display openvpn graphs
by Vikas Kumar 21 Nov '17

21 Nov '17

Hi all i have recently added my openvpn server to observium server for openvpn application monitoring. i have installed {{ xinetd and copied the openvpn script to }}/usr/lib/observium_agent/local/openvpn path. I have opened the openvpn server management port by adding 1st line as "management 10.100.115.220 49000 /etc/openvpn/pass.txt and then restarted openvpn and xinetd. When i checked using netstat on openvpn server the server is listening on tcp port 49000.{{}} i can access the management console of openvpn when i run the following command from my observium server "telnet 10.100.115.220 49000" followed by a password. But i cannot see the graphs of load and users connected in the Web GUI. I have checked RRD folder also of the device there is no rrd file named openvpn.rrd or so. The unix agent is already added to observium server and when i do "telnet 10.100.115.220 36602 | grep openvpn" then i get the following output : (nobody,223056,32312,0.2) /usr/sbin/openvpn --config vpn-routing.conf --daemon vpn-routing (nobody,195680,15056,2.3) /usr/sbin/openvpn --daemon --writepid /var/run/openvpn/vpn-bridge.pid --cd /etc/openvpn/ --config vpn-bridge.conf But i cannot see the graphs in web gui someone please help. Thanks -- <http://moodi.org/> *Vikas Kumar | ** Hospitality & PR Coordinator* *Mood Indigo, IIT Bombay* *+91-9694532954 | mailvikasnow(a)gmail.com <mailvikasnow(a)gmail.com>* [image: Facebook] <https://www.facebook.com/vikas.cse.iitb> ‌ <https://mailtrack.io/> Sent with Mailtrack <https://chrome.google.com/webstore/detail/mailtrack-for-gmail-inbox/ndnaehg…>

2 1

Unable to add Aruba Access points
by Vikas Kumar 21 Nov '17

21 Nov '17

i am using observium CE. i am unable to add Wireless access points from Aruba. They only talk to controller via snmp is it proprietary? thanks -- <http://moodi.org/> *Vikas Kumar | ** Hospitality & PR Coordinator* *Mood Indigo, IIT Bombay* *+91-9694532954 | mailvikasnow(a)gmail.com <mailvikasnow(a)gmail.com>* [image: Facebook] <https://www.facebook.com/vikas.cse.iitb> ‌ <https://mailtrack.io/> Sent with Mailtrack <https://chrome.google.com/webstore/detail/mailtrack-for-gmail-inbox/ndnaehg…>

3 3