- observium - lists.observium.org

Log Names of non discoverable Host in autodiscover
by Serge Müller 26 Oct '15

26 Oct '15

Hi, is there any way to find out which host have been found through autodiscovery but could not be queried by snmp or aren't reachable via ICMP? Since we have lots of people working on our network, i do not always know if someone plugs in new switches or routers, especially not if they forget to configure the acls or snmp. The Observium log only shows "added x Hosts to ..." but no failures, running discovery.php -d -h all is a bit too loud and takes quite to long. Any suggestions? regards Serge

2 1

SNMP extensions : distro ... and others ?
by Massimo.Sala＠asl.bergamo.it 24 Oct '15

24 Oct '15

hi ! On the linux guests, you can tweak the snmpd.conf as extend .1.3.6.1.4.1.2021.7890.1 distro "/bin/cat /etc/debian_version" so Observium detects the host OS. Is it possible to set other "devices" values, like purpose and serial, via SNMP extensions ? It seems these columns aren't used. best regards, Sala

2 1

BGP Alert Checks
by Aaron Hite 23 Oct '15

23 Oct '15

Team, I need some guidance. I have spent some time on the web trying to find examples of how to configure a alert checker to tell me when a BGP peer is Admin up but not working. We have quite a few peers in our environment that are Admin down and I just want to ignore those. I have tried many variations of the checker, but must be missing something. Here is a screenshot of the latest attempt. My device and entity match are set to “*”. If I change the condition or any instead of all, I seem to get alerts that are not correct as they are including peer states that are admin down. Any guidance would be appreciated. Thanks, Aaron

3 6

simple api to check for hostname / IP address / SOLVED
by Massimo.Sala＠asl.bergamo.it 23 Oct '15

23 Oct '15

I solved with this hack : wget http://servername/graph.php?height=102&width=226&type=device_ping&legend=no… in config.php : enable access to images best regards, Sala --- Is it possible with some URL-fu or simple REST API to check if a hostname and / or IP is in Observium ? The goal is to put this check inside some bash scripts. best regards, Sala

2 1

win srv in VM not listed as srv ( rename device, it disappears from "Servers" view )
by Massimo.Sala＠asl.bergamo.it 23 Oct '15

23 Oct '15

Hi I have a Windows 2003 server, virtual, not listed under "Servers" view. We have many Windows 2003 servers, most of all as guests under Vmware ESX. One of this is listed only in the "All devices" view. To the developers : please, can you give me any insight : how does Observium decide the kind of device ? What I have to check to pinpoint the problem ? Best regards, Sala

2 2

WMI
by Ryan Bones 22 Oct '15

22 Oct '15

Hi All, Trying to monitor some simple Windows Server services (Exchange, SQL). Followed the instructions here to no avail: http://jira.observium.org/secure/attachment/11319/WMIPoller-011013-1429-4.p… When I compile the package wmic never goes in the bin directory. And if I poll the servers I get no new info. Observium 0.15.10.7107 (17th October 2015) OS Linux 3.19.0-25-generic [amd64] (Ubuntu 14.04) Apache 2.4.7 (Ubuntu) PHP 5.5.9-1ubuntu4.12 Python 2.7.6 MySQL 5.5.44-0ubuntu0.14.04.1 (extension: mysqli 5.5.44) SNMP NET-SNMP 5.7.2 RRDtool 1.4.7 Thanks, Ryan Ryan Bones | [http://www.taittowers.com/logo/TAIT_Global_Logo.gif] Network Manager T | +1 717-626-9571 M | +1 717-368-7782 www.taittowers.com<http://www.taittowers.com/>

2 1

Junos Pseudowires
by Σταύρος Κρουστούρης 22 Oct '15

22 Oct '15

Hello, We (GRNET) have created a patch for observium in order to get the pseudowires to work in junos devices. How could I merge it to upstream (in case you want it of course)? -- ----------------------------------------------------------------------- Stavros Kroustouris - staurosk(a)noc.grnet.gr GRNET NOC WEB APPLICATION DEVELOPER - http://noc.grnet.gr -----------------------------------------------------------------------

2 1

simple api to check for hostname / IP address
by Massimo.Sala＠asl.bergamo.it 22 Oct '15

22 Oct '15

Hi Is it possible with some URL-fu or simple REST API to check if a hostname and / or IP is in Observium ? The goal is to put this check inside some bash scripts. best regards, Sala

1 0

view all interfaces listed by IP addresses
by Massimo.Sala＠asl.bergamo.it 22 Oct '15

22 Oct '15

Hi Is it possible to view all devices, listed by their interfaces' IP addresses ? It will be very useful to look-up, at a glance, where a IP address is : just click on it to open its device parent. best regards, Massimo

1 0

RRD Error: Error Drawing Graph
by Greg Lipschitz 22 Oct '15

22 Oct '15

Hi All, We've gone to add in some devices today and they are collecting and polling fine, just getting the error "Error Drawing Graph" Looking at the RRD Output it gives this debug; RRDTool Output: ERROR: String ends after the = sign on 'CDEF:inB=' Here is the command; rrdtool graph /tmp/nW5egDfAQJQJzjxw.png -g --alt-autoscale --rigid --start 1445423655 --end 1445510055 --width 1159 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DroidSansMono,DejaVuSansMono' --font AXIS:7:'DroidSansMono,DejaVuSansMono' --font-render-mode normal -E CDEF:inB= CDEF:outB= CDEF:octets=inB,outB,+ CDEF:doutB=outB,-1,* CDEF:inbits=inB,8,* CDEF:outbits=outB,8,* CDEF:bits=inbits,outbits,+ CDEF:doutbits=doutB,8,* VDEF:95thin=inbits,95,PERCENT VDEF:95thout=outbits,95,PERCENT VDEF:d95thout=doutbits,5,PERCENT VDEF:totin=inB,TOTAL VDEF:avein=inbits,AVERAGE VDEF:totout=outB,TOTAL VDEF:aveout=outbits,AVERAGE VDEF:tot=octets,TOTAL COMMENT:' \l' HRULE:999999999999999#FFFFFF:'Total Rx' GPRINT:inbits:LAST:%6.2lf%s GPRINT:inbits:AVERAGE:%6.2lf%s GPRINT:inbits:MIN:%6.2lf%s GPRINT:inbits:MAX:%6.2lf%s GPRINT:totin:%6.2lf%sB COMMENT:'\l' HRULE:999999999999999#FFFFFF:' Tx' GPRINT:outbits:LAST:%6.2lf%s GPRINT:outbits:AVERAGE:%6.2lf%s GPRINT:outbits:MIN:%6.2lf%s GPRINT:outbits:MAX:%6.2lf%s GPRINT:totout:%6.2lf%sB COMMENT:'\l' HRULE:999999999999999#FFFFFF:' Agg' GPRINT:bits:LAST:%6.2lf%s GPRINT:bits:AVERAGE:%6.2lf%s GPRINT:bits:MIN:%6.2lf%s GPRINT:bits:MAX:%6.2lf%s GPRINT:tot:%6.2lf%sB COMMENT:'\l' HRULE:0#999999 Currently on build 0.15.7.6706 Cheers, Greg Greg Lipschitz | Director | The Summit Group E: Greg(a)thesummitgroup.com.au<mailto:Greg@thesummitgroup.com.au> | W: www.thesummitgroup.com.au<http://www.thesummitgroup.com.au> The Summit Group (Australia) Pty Ltd | P: 1300 049 749 | Level 1, 39 Railway Road, Blackburn VIC 3130 The Summit Group (USA) LLC | P: 321 216 3844 | Suite 1003, 364E Main Street, Middletown DE 19709 Postal: P.O. Box 3225, Doncaster East VIC 3109 Follow us on Facebook<http://www.facebook.com/thesummitgroup/> | LinkedIn<http://www.linkedin.com/company/1942329> | Twitter<http://twitter.com/summitgroupau/>

1 0

Feature request + issues with NetApp cDot and EMC Isilon
by Jesper Frank Nemholt 22 Oct '15

22 Oct '15

Hi Not sure if there is a better place for feature requests, but here it goes : 1. In the group option it would be great to be able to create subgroups and assign/re-assign, so different measures related to the same infrastructure or area can be kept together. 2. Currently it is not possible to rename a group. Would be nice to have this option. 3. Would be great to have some simple functions / regex related to the group graphs to allow consolidating & filtering the data further. Right now it will either aggregate/stack data depending on what it is and it would be more flexible to have some control over this. Also being able to give the aggregated data some more meaningful data labels would be nice. Some time back I asked about NetApp cDOT support....got no answer but saw on the forum that someone was looking into this several months back. Right now the cDOT support is very limited as the MIB is different compared to standard OnTAP and it allow for multiple controller pairs in the same cluster. Any news on what the status is ? Same story for Isilon, here all the server data is gathered, but with complete unawareness of the nodes being in a cluster.... so the only way to get cluster data properly recorded & presented is to create a group for all nodes and create aggregated graphs. Anyone using Observium with IBM GPFS (ESS) ? /Jesper

1 0

Re: [Observium] BGP Alert Checks
by Moerman, Maarten 21 Oct '15

21 Oct '15

https://github.com/mgmoerman/docs/blob/master/observium-alert-checkers.md There's a BGP example there. This works on both Juniper & Cisco with Ipv4 & IPv6 (there's some details on this, in a thread on this mailing list) Maarten -- Maarten Moerman | Mgr, Network Engineering | eBay Classifieds | +31-655122247 | mmoerman(a)ebay.com From: observium on behalf of Aaron Hite Reply-To: Observium Network Observation System Date: Wednesday, October 21, 2015 at 4:32 PM To: "observium(a)observium.org<mailto:observium@observium.org>" Subject: [Observium] BGP Alert Checks Team, I need some guidance. I have spent some time on the web trying to find examples of how to configure a alert checker to tell me when a BGP peer is Admin up but not working. We have quite a few peers in our environment that are Admin down and I just want to ignore those. I have tried many variations of the checker, but must be missing something. Here is a screenshot of the latest attempt. My device and entity match are set to “*”. If I change the condition or any instead of all, I seem to get alerts that are not correct as they are including peer states that are admin down. Any guidance would be appreciated. Thanks, Aaron

2 1

FW: Correct metrics for storage_free checker
by Hilco de Lathouder 21 Oct '15

21 Oct '15

Hi, I'd like to use the storage_free (instead of storage_perc) to get an alert if disk space is below 500 MB. What kind of units are used (byts/mb/kb/gb) ? I was thinking the rule would be like 'storage_free lt 500' if it's in megabytes. Or should i use 'gb' or 'mb' in the equation? Regards, Hilco

2 1

Observium CE / rename device, it disappears from "Servers" view
by Massimo.Sala＠asl.bergamo.it 21 Oct '15

21 Oct '15

Hi Command used : /opt/observium/rename_device.php azimuth3 srvbggwer004 Host azimuth3 renamed to srvbggwer004 I see the server under Devices | All devices, but it disappears from "Servers". Also naming back to "azimuth3" doesn't solve. Is there a database hack to place the host in the right category ? Observium CE 0.15.6.6430 best regards, Sala

1 0

Request: Add a device proactively
by Nate Mellendorf 20 Oct '15

20 Oct '15

Observium team, I just finished pre-deploying a few routers for a new client, and I'm adding each one to our monitoring platforms in advance. As they're offline, I'll be unable to add them to Observium until they respond to SNMP / ICMP. Is there a way I could add these proactively, and work around the error that Observium pushes our by default? Ideally, I'd like to add them all now, disable their alerts, and enable them when they're deployed and connectivity is in place. I see you have a Ignore RRD checkbox on the add device page. I wonder if we could have another that says, "Add even though device is offline"? As always, thank you for your feedback and time on this. Regards, Nate Mellendorf | Network Analyst | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 <http://www.netgainhosting.com/> www.NetgainHosting.com _____ The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure. If you have received this message in error, please notify the sender immediately and delete the original. Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited.

7 8

Asterisk DAHDI monitoring
by Pieter De Wit 19 Oct '15

19 Oct '15

Hi Guys, Can we please add DAHDI monitoring to the asterisk agent ? As per http://jira.observium.org/browse/OBSERVIUM-655?focusedCommentId=12588&page=… [1] I will gladly supply a patch to the agent file, if someone can "extend" the view of Asterisk to include dahdichannels and dahdiactive Thanks, Pieter Links: ------ [1] http://jira.observium.org/browse/OBSERVIUM-655?focusedCommentId=12588&p…

1 0

Alert on missing CDP/LLDP neighbor
by Spencer Ryan 19 Oct '15

19 Oct '15

Is is possible to alert on a specific CDP/LLDP neighbor going away? *Spencer Ryan* | Senior Systems Administrator | sryan(a)arbor.net *Arbor Networks* +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com

1 0

Re: [Observium] Request: Add a device proactively
by Nate Mellendorf 19 Oct '15

19 Oct '15

I was going to do something simular, but thought I'd request a feature add. When I deploy my devices, I deploy them with a script that's been standardized / approved. Setting up DHCP would be possible, but it adds additional steps (prone to user error) and may not be possible for all Observium users. I can see why you may not want to add it, but I feel it would be a really nice time saver for future deployments. You configured Observium to say no, I wont poll you if I can't find you. I think this is a little bit of a grey area, where we know it'll be there eventually. Just my two cents. Thanks again Adam for the consideration. ---------------------------------------------------------------------- Message: 1 Date: Mon, 19 Oct 2015 08:27:26 -0700 From: Robbie Wright <robbie(a)siuslawbroadband.com> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Request: Add a device proactively Message-ID: <CADTKZWZ8kbo7ZU8KAnbANzvh+udkEAaC9Bg05zm+V2AxqZZYmg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" The way we currently handle this, since all of the devices require dns, is to pre-provision the device on a dhcp network and set dns to the temporary dhcp address. We can do the full config on the on the device, ship it, and when it is in its new location (or while it is being shipped) update dns to the new static IP you pre-provisioned and then when it is plugged in, all should be good with the world. In theory. Most of the time. Robbie Wright Siuslaw Broadband <https://siuslawbroadband.com> 541-902-5101 On Mon, Oct 19, 2015 at 8:14 AM, Matt Ladewig <matt(a)univoip.com> wrote: > I?m in favor of having an offline device add option. We would be able > to add the device to Observium as part of the normal provisioning > workflow, instead of post activation. > > > > *From:* observium [mailto:observium-bounces@observium.org] *On Behalf > Of *Adam Armstrong > *Sent:* Monday, October 19, 2015 8:10 AM > *To:* observium(a)observium.org > *Subject:* Re: [Observium] Request: Add a device proactively > > > > Hmm... I'm not sure about this. What do other people think? > > > > adam. > > On 19/10/2015 16:07:40, Nate Mellendorf < > nate.mellendorf(a)netgainhosting.com> wrote: > > Observium team, > > > > I just finished pre-deploying a few routers for a new client, and I?m > adding each one to our monitoring platforms in advance. > > As they?re offline, I?ll be unable to add them to Observium until they > respond to SNMP / ICMP. > > > > Is there a way I could add these proactively, and work around the > error that Observium pushes our by default? > > Ideally, I?d like to add them all now, disable their alerts, and > enable them when they?re deployed and connectivity is in place. > > > > I see you have a Ignore RRD checkbox on the add device page. I wonder > if we could have another that says, ?Add even though device is offline?? > > > > As always, thank you for your feedback and time on this. > > > > > > Regards, > > > > *Nate Mellendorf **|* *Network Analyst **|* *Netgain* > 720 West Saint Germain Street | St. Cloud | MN | 56301 > Phone: 320.251.4700 x183 *|* 877.797.4700 x183 > *www.NetgainHosting.com* <http://www.netgainhosting.com/> > > > ------------------------------ > > The information contained in this email message is for the designated > recipient only and may be privileged, confidential, and protected from > disclosure. If you have received this message in error, please notify > the sender immediately and delete the original. Any dissemination, > distribution, copying or other use of this message or any information > contained within is strictly prohibited. > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >

1 0

Observium CE, housekeeping.php parameters
by Massimo.Sala＠asl.bergamo.it 19 Oct '15

19 Oct '15

Hi ! Reading http://www.observium.org/docs/housekeeping/ -b Cleans up stale entries in the database. Sometimes entries get left behind when devices are removed, this will clean them up. It seems the switch is missing : /opt/observium/housekeeping.php Observium CE 0.15.6.6430 HouseKeeping USAGE: housekeeping.php [-Vyaserptd] [-A <age>] I don't know if the web page is outdated, or I have to update our installation. Please help ! best regards, Sala

2 1

Re: [Observium] Request: Add a device proactively
by Massimo.Sala＠asl.bergamo.it 19 Oct '15

19 Oct '15

Also for me it is useful to add a device even if "dead". If you prefer, add a switch to add_device.php --no-snmp don't check device online So only the wise guys will force it. best regards, Massimo

1 0

Re: [Observium] observium Digest, Vol 63, Issue 65
by Dudu Handelman 19 Oct '15

19 Oct '15

I think it's a solid idea. With other systems i made it in the past. its very useful while you are building a new rack you know that all is up at the end or even during the install. Sent from my Samsung device -------- Original message -------- From: observium-request(a)observium.org Date: 19/10/2015 18:15 (GMT+02:00) To: observium(a)observium.org Subject: observium Digest, Vol 63, Issue 65 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: Request: Add a device proactively (Adam Armstrong) 2. Re: Request: Add a device proactively (Matt Ladewig) ---------------------------------------------------------------------- Message: 1 Date: Mon, 19 Oct 2015 16:09:45 +0100 From: "Adam Armstrong" <adama(a)memetic.org> To: "" <observium(a)observium.org> Subject: Re: [Observium] Request: Add a device proactively Message-ID: <ba9da84a-386c-4c21-86a7-fdc71ba98e44(a)getmailbird.com> Content-Type: text/plain; charset="utf-8" Hmm... I'm not sure about this. What do other people think? adam. On 19/10/2015 16:07:40, Nate Mellendorf <nate.mellendorf(a)netgainhosting.com> wrote: Observium team, ? I just finished pre-deploying a few routers for a new client, and I?m adding each one to our monitoring platforms in advance. As they?re offline, I?ll be unable to add them to Observium until they respond to SNMP / ICMP. ? Is there a way I could add these proactively, and work around the error that Observium pushes our by default? Ideally, I?d like to add them all now, disable their alerts, and enable them when they?re deployed and connectivity is in place. ? I see you have a Ignore RRD checkbox on the add device page. I wonder if we could have another that says, ?Add even though device is offline?? ? As always, thank you for your feedback and time on this. ? ? Regards, ? Nate Mellendorf | Network Analyst | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 www.NetgainHosting.com [http://www.netgainhosting.com/] The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure.? If you have received this message in error, please notify the sender immediately and delete the original.? Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited.?????????????? ?

1 0

DB Errors
by Eduardo Schoedler 19 Oct '15

19 Oct '15

Hi, I have upgraded now to 6655 and I saw an db error. Updated to revision 6655. Observium 0.15.7.6655 Discovery -- Updating database/file schema 203 -> 204 ... (db) done (1 errors). -- Done Looking the logs/db.log file: [2015/07/09 21:46:19 -0300] poller.php(1595): Failed dbQuery (#1062 - Duplicate entry '73-4006-001exxxxxxxx' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('73','4006','17112','001exxxxxxxx','learned') [2015/07/09 21:46:19 -0300] poller.php(1595): Failed dbQuery (#1062 - Duplicate entry '73-4006-0022yyyyyyd3' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('73','4006','17112','0022yyyyyyd3','learned') ... [2015/07/15 11:49:52 -0300] discovery.php(12686): Failed dbQuery (#1071 - Specified key was too long; max key length is 1000 bytes), Query: ALTER TABLE `slas` DROP INDEX `unique_key`, ADD UNIQUE `unique_key` (`device_id`, `sla_mib`, `sla_index`, `sla_owner`); Can you verify, please? Thanks. -- Eduardo Schoedler

2 6

Cannot see ospf or bgp related graphs on Nexus 9000 and MX 480
by George Philip 19 Oct '15

19 Oct '15

Hi,I have installed Observium and have ospf and bgp related polling ,discovery parameters in the config.php file. However, I am unable to see the routing protocol related graph in the web page. Is there anything else that I need to do as I have these protocols running on the Nexus 9000 and MX480 router. Thanks,George

1 0

Juniper QFX 10G ports discovered as 4.29G
by Aaron Finney 18 Oct '15

18 Oct '15

Just FYI, the 10G ports on a QFX 5100 running latest JunOS are being reported with a speed of 4.29Gbps, which I assume is likely the actual returned value being constrained by a 32-bit container? Not a critical thing for us to fix - I was actually disabling polling for all of our Juniper vcp stacks in Observium (most of them take > 300s to complete a polling cycle) but noticed this as I was going through them and figured I'd pass it along. Cheers, Aaron

6 9

Re: [Observium] Tripplite PDUMNH20 (power strips)
by Ralph Pursifull 17 Oct '15

17 Oct '15

Great progress. Data now appears in RRD, just it’s off by 10 X. Plots show 1.1, correct answer is 11.0 Amps. When I look at the device with iReasoning MIB browser, using the UPS-MIB supplied by TrippLite, or the UPS-MIB from Observium, it says: integer: 11 See attached. Seems most of the MIB files mention units of “0.1 RMS Amp”. Not sure what that does. Any way to resolve this? upsOutputCurrent OBJECT-TYPE SYNTAX NonNegativeInteger UNITS "0.1 RMS Amp" MAX-ACCESS read-only STATUS current DESCRIPTION "The present output current." ::= { upsOutputEntry 3 } From: Mike Stupalov [mailto:mike@stupalov.ru] Sent: Friday, October 16, 2015 4:23 PM To: Ralph Pursifull <ralph(a)palamida.com> Cc: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Tripplite PDUMNH20 (power strips) I see that Current output already discovered (with value 1.1): Discover sensor: current, pdu72, .1.3.6.1.2.1.33.1.4.4.1.3.1, upsOutputEntry.1, ups-mib, Output, SCALE: 0.1, LIMITS: (, , , ), CURRENT: 1.1 But I fix (clean) some incorrectly discovered sensors in r7105. On Sat, Oct 17, 2015 at 1:20 AM, Ralph Pursifull <ralph(a)palamida.com<mailto:ralph@palamida.com>> wrote: Here you go. Thanks for your help on this. From: observium [mailto:observium-bounces@observium.org<mailto:observium-bounces@observium.org>] On Behalf Of Mike Stupalov Sent: Friday, October 16, 2015 3:07 PM To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Subject: Re: [Observium] Tripplite PDUMNH20 (power strips) Hi, observium already have mostly support for UPS-MIB including upsOutputCurrent. Seems as something wrong in snmpwalk output. Send me debug output for: ./discovery.php -d -m sensors -h <this_device> On Sat, Oct 17, 2015 at 12:21 AM, Ralph Pursifull <ralph(a)palamida.com<mailto:ralph@palamida.com>> wrote: Hi Adam, Still have a problem with a fresh Professional install of “current” observium/trunk. Situation: For a Tripplite PDUMNH20 (power strip) we want to display total current. This will help us manage power consumption in our remote rack at the colo site, where we pay directly for amps. Latest “current” Observium page generated for PDUMNH20 attempts to display a “Current” plot in the upper right. Unfortunately all values are “0” with units of “–nan”. TrippLite Support tells me we want this data item from the UPS-MIB. Name: upsOutputCurrent.1 OID: .1.3.6.1.2.1.33.1.4.4.1.3.1 Data : 4 Descroption: The present output current. Please can you plot that one? What OID are you trying to plot? What is cost of fix? Happy to go that route. Ralph From: observium [mailto:observium-bounces@observium.org<mailto:observium-bounces@observium.org>] On Behalf Of Adam Armstrong Sent: Thursday, October 08, 2015 1:04 PM To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Subject: Re: [Observium] Tripplite PDUMNH20 (power strips) Hi Ralph, Its possible this is already fixed in the current subscription edition. If not, you have two options (both of which require having a subscription!): Hope we fix it once you confirm its not fixed in subscription. Pay someone for a couple of hours work to fix it. The choice between the two is usually based on how much you want the fix :) I vaguely recall some triplite stuff changing in the recent past, so chances are it's fixed already. I don't have any of those devices though, so can't say for certain with looking into it a little further. Adam. Sent with AquaMail for Android http://www.aqua-mail.com On 8 October 2015 8:37:53 pm Ralph Pursifull <ralph(a)palamida.com<mailto:ralph@palamida.com>> wrote: Hi. New to this list, so please excuse if I break etiquette. For couple years we happily used Observium to monitor and track current through our Tripplite PDUMNH20. Thanks to you all for Observium. Life was OK, but the integrated Tripplite SNMPWEBCARDs had problems from time to time. Tripplite rolled out new firmware (currently 12.06.0065) and that issue was resolved. (SNMPWEBCARD is a component used in many of their products.) Unfortunately, now current plots as a flat line at 0. I’ve worked with Tripplite support to verify some data is present with snmpwalk. But probably not where Observium expects to find it. My guess is the firmware change switched to a new mib. I’ve tried to delete devices, update Observium and recreate… no luck. Tripplite currently provides these two MIBs http://www.tripplite.com/shared/software/Firmware/UPS-MIB-Definitions.txt http://www.tripplite.com/shared/software/Firmware/Tripp-Lite-MIB-Definition… Would be happy to switch to Professional, buy support, whatever is needed to restore ability to plot Current over time from Tripplite PDUMNH20. Any good advice? _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium%40observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium<http://postman.memetic.org/cgi-bin/mailman/listinfo/observium> _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov http://observium.org/

2 1

Tripplite PDUMNH20 (power strips)
by Ralph Pursifull 17 Oct '15

17 Oct '15

Hi. New to this list, so please excuse if I break etiquette. For couple years we happily used Observium to monitor and track current through our Tripplite PDUMNH20. Thanks to you all for Observium. Life was OK, but the integrated Tripplite SNMPWEBCARDs had problems from time to time. Tripplite rolled out new firmware (currently 12.06.0065) and that issue was resolved. (SNMPWEBCARD is a component used in many of their products.) Unfortunately, now current plots as a flat line at 0. I've worked with Tripplite support to verify some data is present with snmpwalk. But probably not where Observium expects to find it. My guess is the firmware change switched to a new mib. I've tried to delete devices, update Observium and recreate... no luck. Tripplite currently provides these two MIBs http://www.tripplite.com/shared/software/Firmware/UPS-MIB-Definitions.txt http://www.tripplite.com/shared/software/Firmware/Tripp-Lite-MIB-Definition… Would be happy to switch to Professional, buy support, whatever is needed to restore ability to plot Current over time from Tripplite PDUMNH20. Any good advice?

3 4

Add Bill to Normal User & Password Change for normal User
by Basile Bluntschli 16 Oct '15

16 Oct '15

Hi All 1) I no longer can add a bill to a normal user. While the dropdown menu is there, I can select the bill, but it does not get saved by clicking on ADD. 2) Where is a normal User able to change its password? URL? Running 7097 Thanks a lot Basile

3 3

Escaped sysContact not being escaped properly
by Spencer Ryan 16 Oct '15

16 Oct '15

I've got several UBNT devices all running EdgeMax 1.7.0 It appears that they escape the sysContact (and a few other fields) in quotes even if they don't have spaces in them. Observium seems to eat the first one properly but not the second. snmpwalk -Os -c public -v 2c router01 1.3.6.1.2.1.1.4 iso.3.6.1.2.1.1.4.0 = STRING: "\"hostmaster(a)arbor.net\"" However in the UI I see this: sysContact*=>*hostmaster(a)arbor.net\ Which causes email notifications to fail, because of the bad email address. Any hope? *Spencer Ryan* | Senior Systems Administrator | sryan(a)arbor.net *Arbor Networks* +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com

2 2

Ignore Statuses Possible?
by Tim Calvin 15 Oct '15

15 Oct '15

Hello We have a few AC powered Foundry FWS-24 switches. Observium is showing alerts for the secondary power supply and fans under statuses. Is there anyway to ignore these? I tried poking around and couldn’t find anything that would do the trick. I don’t even think they have secondary power supplies and fans. Maybe in another hardware configuration but certainly not ours. I have attached a screenshot. Running Observium Professional 0.15.10.7072

3 2

dlink DGS-1100-24 only found as generic
by Simon Smith 15 Oct '15

15 Oct '15

Hi All, our new D-Link DGS-1100-24 switches are only being discovered as generic device but strangely enough its finding 1 vlan? the syObjectID is being found as .1.3.6.1.4.1.171 but i can see inside os.inc.php the sysObjectID is already included as D-Link-Generic (Line:1950) even tho it could be put under the D-Link Switch (Line:1927) i have included a run poller.php and discover.php commands here - http://pastebin.com/8iKYU16N can the great and wonderful people working at Observium please help :-) Regards Simon - Hestor Ltd

2 3

Re: [Observium] Cannot see ospf or bgp info
by George Philip 15 Oct '15

15 Oct '15

Hi Adam,I am using Nexus 9k's and MX 480 with ospf and bgp. I am not sure why I don't any protocol related information on Observium. Thanks,George From: Adam Armstrong <adama(a)observium.org> To: George Philip <gkonapoz(a)yahoo.com> Sent: Wednesday, October 14, 2015 12:33 PM Subject: Re: [Observium] Cannot see ospf or bgp info Hi George,These features will only becomevisible in the ui once a device which supports them has been discovered andpolled.The devices need to supportbgp4-mib and ospf-mib.Thanks, Adam.Sent with AquaMail for Android http://www.aqua-mail.com On14 October 2015 4:11:30 pm George Philip <gkonapoz(a)yahoo.com> wrote: Hi,I installed Observium and have enabledthe bgp and ospf polling. However, I do not see the option of seeing thatinfo from the gui. I can see graphs on traffic but I cannot see any titlefor ospf or bgp. Also, I do not any entries for arp or mac table. Do I need to have license for thesefeatures ? Thanks, George_______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Cannot see ospf or bgp info
by George Philip 14 Oct '15

14 Oct '15

Hi,I installed Observium and have enabled the bgp and ospf polling. However, I do not see the option of seeing that info from the gui. I can see graphs on traffic but I cannot see any title for ospf or bgp. Also, I do not any entries for arp or mac table. Do I need to have license for these features ? Thanks, George

1 0

Obervium web page not coming up
by George Philip 14 Oct '15

14 Oct '15

Hi,I installed Observium on Centos and I added devices also successfully.Somehow, the webpage is not coming up and I followed the instruction mentioned in the webpage.My file /etc/http/conf/httpd.conf looks as follows: # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. admin(a)your-domain.com # #ServerAdmin root@localhost # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # <VirtualHost *:80> DocumentRoot /opt/observium/html/ ServerName asvobs02.abcd.io CustomLog /opt/observium/logs/access_log combined ErrorLog /opt/observium/logs/error_log <Directory "/opt/observium/html/"> AllowOverride All Options FollowSymLinks MultiViews </Directory> </VirtualHost> Thanks, George

3 6

Service monitoring feature
by Stephen Penfold 14 Oct '15

14 Oct '15

Hi Guys, I know service monitoring (nagios plug-in) is now deprecated and removed however just curious if there will be any chance of the feature being developed in future? Would be nice to do away with Nagios and have Observium as our all-in-one monitoring solution ☺ Cheers Stephen Penfold Helpdesk Support Assistant Tel: +61 7 5553 5995 Email: Stephen.Penfold(a)careflight.org.au Web: www.careflight.org.au Address: PO Box 5078, Robina, QLD, 4230 [cid:imagec15b3f.JPG@2e3eebe0.45828f54] <http://www.careflight.org.au> [cid:image91d517.PNG@d77d9f73.42982d3b]<https://www.facebook.com/RACQCareFlight> [cid:imaged92729.PNG@c049b465.42a799e2] <https://twitter.com/CareFlightQLD> [cid:image0c3b01.PNG@d1cb199d.4586a257] <https://instagram.com/racqcareflightrescue/> [cid:image7cbb03.PNG@733799ae.4b9641ad] <https://www.youtube.com/user/careflightgroup> [cid:image86e2db.PNG@642ee964.48aeeeac] <https://www.linkedin.com/company/careflight-group-queensland> [cid:image110385.PNG@c4d861a6.498f72f2]<http://newsletter.brightlabs.com.au/h/r/4FBDC674FBFB389D> This communication including any file attachments is intended solely for the use of the individual or entity to whom it is addressed. If you are not the intended recipient, or the person responsible for delivering this communication to the intended recipient, please immediately notify the sender by email and delete the original transmission and its contents. Any unauthorised use, dissemination, forwarding, printing, or copying of this communication including any file attachments is prohibited. It is your responsibility to scan this communication including any file attachment for viruses and other defects. To the extent permitted by law, CareFlight Group and its associates will not be liable for any loss or damage arising in any way from this communication including file attachments.

1 0

Switch uptime
by Eduardo Schoedler 14 Oct '15

14 Oct '15

Hi, Is there a problem with switches uptime? [image: Imagem inline 2] # /usr/bin/snmpget -v2c -c 'xxxxxxxx' -Pu -OQUst -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'my-host':'161' sysObjectID.0 sysUpTime.0 sysObjectID.0 = enterprises.4413 sysUpTime.0 = 227811800 # snmpwalk -v 2c -c xxxxxxxx my-host sysUpTime DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (227812500) 26 days, 8:48:45.00 Thank you. -- Eduardo Schoedler

1 0

10gbps port showing as 10bps
by Cameron Murray 12 Oct '15

12 Oct '15

As the subject says we've recently installed a 10gbps Dell switch and the ports are showing as bps not gbps. ALERT Modify<http://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5…> Alert Utilization has exceeded 80% Entity tengigabitethernet1/0/1<http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/> Conditions ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740) Metrics ifInOctets_perc = 623770 ifOutOctets_perc = 631740 Duration 3 days, 1h 13m 43s (2015-09-28 13:43:41) Device Device bne-be-l2r16-sw10g<http://cacti.bettacomputers.com.au/device/device=99/> Hardware Operating System Generic Device Location Uptime 3 days, 3h 46m 24s The ports that are trained up as 1gbps show correctly however higher do not. Port Data: port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 ) Regards, Cameron Murray Remote Support Engineer How am I doing? Please click here<http://www.techpath.com.au/contact-us/feedback/> to rate my work. [cid:image001.png@01D1000F.A5564960]<http://www.techpath.com.au/> P 1300 033 300 F 07 3809 3999 E cameron(a)techpath.com.au www.techpath.com.au<http://www.techpath.com.au> Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]<http://www.facebook.com/techpathau> [Twitter]<http://twitter.com/techpathau> [LinkedIn]<http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd.

6 20

Problem adding user to view a port / vlan
by Stephen Bateman 11 Oct '15

11 Oct '15

Hi Everyone, Is there a procedure for adding a single user who I want to see vlan traffic statistics and the ports on a switch. I have tired creating a normal user which worked fine. However when I select the device and the port and click Add nothing happens. When I click refresh it still says "This user currently has no permitted ports" Any help would be appreciated, I am using the Professional version 0.15.10.7095 Thanks Stephen

1 0

Re: [Observium] email alert showing device_ping
by Gavin Henry 11 Oct '15

11 Oct '15

You might want you have scrubbed that image or fixed your firewall: https <https://proxmox.zeplin.co.uk:8006/#v1:0:18:4::::>:// <https://proxmox.zeplin.co.uk:8006/#v1:0:18:4::::>proxmox.zeplin.co.uk <https://proxmox.zeplin.co.uk:8006/#v1:0:18:4::::>:8006/#v1:0:18:4:::: <https://proxmox.zeplin.co.uk:8006/#v1:0:18:4::::>::

2 1

email alert showing device_ping
by Simon Smith 11 Oct '15

11 Oct '15

Hi All, has anybody noticed the weird alerts being sent by email or is it just myself with this issue? I have an alert setup to tell me if device_uptime is between 0 and 600 then alert me (rebooted kit/server) however the email is showing the words device_ping under the email alerts where a graph would show if the alert had a graph attached a screenshot to show you what i mean regards Simon

1 0

aggregate graphs
by Jeffrey d'Ambly 09 Oct '15

09 Oct '15

Is there way to create aggregate graphs using graph.php? —Jeff

2 4

Orphaned ports
by Aaron Mayfield 09 Oct '15

09 Oct '15

I've been digging around in my database, trying to figure out why I have a large number of ports listed in my observium interface, compared to the number of devices I have. I have discovered several devices that were removed (via delete_device.php) a while back, but it seems that the ports table wasn't completely cleaned up. These devices were removed from the devices table: mysql> select * from devices where device_id in(45,66,67,68,69,70,71,72,73); Empty set (0.00 sec) mysql> But the ports for these devices weren't entirely removed: mysql> select device_id,count(*) as "number of ports" from ports where device_id IN(45,66,67,68,69,70,71,72,73) group by device_id; +-----------+-----------------+ | device_id | number of ports | +-----------+-----------------+ | 45 | 4153 | | 66 | 4153 | | 67 | 4153 | | 68 | 4153 | | 69 | 4153 | | 70 | 1569 | | 71 | 4153 | | 72 | 4153 | | 73 | 4153 | +-----------+-----------------+ 9 rows in set (0.01 sec) mysql> These devices were probably F10/Dell M1000e cards, which I removed from observium because of the large number of l2vlan interfaces on each was causing a processor burden when polled. Rather than fight with them, I just removed them. My question is this, how can I clean up the remnants? Can I just delete these orphaned ports from the table? Or will I break anything if I do that? Thanks This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. Please note that any views or opinions present in this email are solely those of the author and do not necessarily represent those of the company. Finally the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. (Proprietary & Confidential - Artisan Infrastructure, Inc. et all.)

2 2

DRBD Stats / Agent
by Robert Williams 09 Oct '15

09 Oct '15

Hi, Is anyone successfully using the agent to retrieve DRBD statistics? We may be suffering from http://jira.observium.org/browse/OBSERVIUM-574 - I'm not 100%, but I wondered if anyone had fixed it or found a workaround and simply hadn't shared their findings on Jira? Cheers all! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

2 2

Multiple OSPF processes
by Miguel Berniz 09 Oct '15

09 Oct '15

Hello, I have noticed only 1 OSPF process is detected on cisco devices. I have a Catalyst 4500 with 3 processes but only one of them is handle by observium. Is this the normal behavior or does it require special config or not supported at all? Thanks in advance, Miguel

2 1

Update http://www.observium.org/docs/add_device/ for missing "search" line with resolv.conf
by Przemysław S. Knycz 08 Oct '15

08 Oct '15

Hello! I've wird problem with "Can't resolve ...." when adding device (from ./add_device.php and from website). Te solution was simple - there was missing "search domain" at /etc/resolv.conf - i don't find this kind of problem and solution, so you can add it at site to Troubleshooting. Thanks. Regards. -- . Przemyslaw Stanislaw Knycz, +48 601391681 . | WiFi&fiber engineer, xmpp:djrzulf@gmail.com | ` Futurama: You can't prove it won't happen '

1 0

Professional Edition
by Jorge Riveiro Fernandez 06 Oct '15

06 Oct '15

Dear Team, ¿Is possible to make Professional Edition payment via bank transfer or something alternative to credit card or Paypal? BR Jorge Riveiro Fernández Votorantim Cimentos Europe, Africa & Asia IT - Telecoms Area Corporate Center Vigo jorge.riveiro(a)vcimentos.com<mailto:jorge.riveiro@vcimentos.com>

1 0

rsyslog omprog integration Problem
by Serge Müller 05 Oct '15

05 Oct '15

Hi, i'm running observium (latst svn) on a ubuntu 14.04 System. Have Setup rsyslog for udp listening, deployed /etc/rsyslog.d/30-observium.conf as stated in http://www.observium.org/docs/syslog/ However my observium.syslog table stays empty. I have enabled debugging and syslog debuging in config.php so everytime i send a string to /opt/observium/syslog.php the string appears in my observium debug logs. I have started rsyslog in debug mode and (from what rsyslog says) it executes syslog.php: 9163.747286922:7f66a9681700: scriptExec: batch of 1 elements, active (nil), active[0]:1 9163.747293145:7f66a9681700: PROPFILT 9163.747311025:7f66a9681700: Property.: 'inputname' 9163.747324703:7f66a9681700: Operation: 'isequal' 9163.747344027:7f66a9681700: Value....: 'imudp' 9163.747359865:7f66a9681700: Filter: check for property 'inputname' (value 'imudp') isequal 'imudp': TRUE 9163.747370811:7f66a9681700: batch: item 0 PROPFILT 1 9163.747376767:7f66a9681700: scriptExec: batch of 1 elements, active 0x7f66980008e0, active[0]:1 9163.747382283:7f66a9681700: ACTION 0x1fb4d40 [omprog::omprog:;observium] 9163.747404416:7f66a9681700: RRRR: execAct [omprog]: batch of 1 elements, active 0x7f66980008e0 9163.747411147:7f66a9681700: Called action(NotAllMark), processing batch[0] via 'omprog' 9163.747416542:7f66a9681700: Called action(Batch), logging to omprog 9163.747428741:7f66a9681700: submitBatch: enter, nElem 1 9163.747437691:7f66a9681700: tryDoAction 0x1fb4d40, pnElem 1, nElem 1 9163.747443729:7f66a9681700: Action 0x1fb4d40 transitioned to state: itx 9163.747449524:7f66a9681700: entering actionCalldoAction(), state: itx 9163.747471965:7f66a9681700: executing program '/opt/observium/syslog.php' 9163.747917480:7f66a9681700: child has pid 27457 9163.747944939:7f66a9681700: Action 0x1fb4d40 transitioned to state: rdy 9163.747956857:7f66a9681700: action 0x1fb4d40 call returned 0 9163.747978533:7f66a9681700: scriptExec: batch of 1 elements, active 0x7f66980008e0, active[0]:1 9163.748003042:7f66a9681700: STOP and it even returns 0 ! anyone ever stumbled upon such a problem? i put in an additional line in 30-observium.conf :inputname, isequal, "imudp" /var/log/remote/debug.log;observium and it logs my messages just fine any ideas would be highly appreciated best regards Serge

1 0

Custom contacts
by Tim Vaughan 02 Oct '15

02 Oct '15

Hi, is it possible to write my own methods for alert contacts? I'd like to add other services, similar to Pushover, which use a JSON API. Is there any documentation I can use to get started? -- Mobile: 07868246225 Skype: tvaughan Twitter: twitter.com/tvaughan

1 0

$config['snmp']['max-rep'] working?
by Tim Cooper 02 Oct '15

02 Oct '15

Hi Chaps, I'm trying to use $config['snmp']['max-rep] = 9 to work around an issue with a device that won't return everything from ifAlias when using the default (10), however checking the discovery debug it doesn't actually seem to actually be setting the -Cr option in snmpbulkwalk? Am I missing something else to make this work, or is it actually just not working due to its 'experimental' state in the documentation? Running 0.15.10.7059 Thanks, Tim C

3 8

licens renewal
by Casper Allerslev Jensen 02 Oct '15

02 Oct '15

does the licens auto renew or would i need to go in and renew automaticly every year?

1 0

I keep getting mysql errors..
by Casper Allerslev Jensen 01 Oct '15

01 Oct '15

MySQLi connection error 2002: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) Call to function mysqli_error() without link identifier. MySQL Error: any ideas to solve this?

3 2

Re: [Observium] Fwd: NTP Graphs
by Federico Olivieri 01 Oct '15

01 Oct '15

Finally, I managed to have the APP tab, however 2 problems still persist: 1. The NTP Graphs and PDNS the show nothing, just error graph not drawing 2. Under device setting - application I disabled the ntp and pdns application and then they disappeared and I have the message No applications found on this device. however they still are in the folder root@banana:/usr/lib/observium_agent/local# ls -l total 8 -rwxr-xr-x 1 root root 3211 Oct 1 12:00 ntpd -rwxr-xr-x 1 root root 3211 Oct 1 12:00 powerdns-recursor What's wrong with my observium??? :( Thank You Federico 2015-10-01 8:33 GMT+01:00 Federico Olivieri <lvrfrc87(a)gmail.com>: > Hi Adam, > > I tried to re-install Unix Agent from scratch and I still have a problem. > I double cheked the permission and all files belong to root:root with chmod > +x. I don't know what is wrong but I'm quite sure it is something of > stupid! I' m so sad because I have seen that unix agent support power-dns > recursor that is the DNS server that is running on my machine and the > graphs they will be very useful! > I was wondering if you would have just 5 minutes for loggin into my server > and have a quick look. > > I would be very glad > > Thank you for your time so far > > Federico > > 2015-10-01 0:13 GMT+01:00 Adam Armstrong <adama(a)memetic.org>: > >> There is literally nothing to break, this is what the script does : >> >> export AGENT_LIBDIR="/usr/lib/observium_agent" >> >> LOCALDIR=$AGENT_LIBDIR/local >> >> if cd $LOCALDIR >> then >> for skript in $(ls|grep -v '~$') >> do >> if [ -x "$skript" ] ; then >> ./$skript >> fi >> done >> fi >> >> If that doesn't work, the only thing it could realistically possibly be >> is permissions related. >> >> adam. >> >> On 01/10/2015 00:01:34, Federico Olivieri <lvrfrc87(a)gmail.com> wrote: >> Hi, >> >> the packages dpkg rpm were there when I copied the scripts from >> scripts/agent-local >> In regards to user and chmod, I was trying different combination. The >> original script are in this user and group >> >> -rwxrwxr-x 1 banana banana 3211 Mar 26 2014 ntpd >> >> I changed in root root because it didn't work... >> >> >> 2015-09-30 23:55 GMT+01:00 Adam Armstrong <adama(a)memetic.org>: >> >>> Is there any reason that you have dpkg *and* rpm? >>> >>> How come the ntpd script has a different user and us chmod 777? >>> >>> It's possible that there's a permissions issue preventing the scripts >>> from being run. I've never encountered a situation where the >>> observium_agent script failed to execute scripts in the correct directory, >>> so I have no idea why it wouldn't be working. >>> >>> adam. >>> >>> On 30/09/2015 23:50:56, Federico Olivieri <lvrfrc87(a)gmail.com> wrote: >>> It is strange because I have applications under the folder >>> >>> root@banana:/usr/lib/observium_agent/local# ls -l >>> total 104 >>> -rwxrwxr-x 1 root root 2910 Mar 3 2014 apache >>> -rwxrwxr-x 1 root root 880 Mar 3 2014 dmi >>> -rwxrwxr-x 1 root root 714 Mar 3 2014 dpkg >>> -rwxrwxr-x 1 root root 342 Mar 3 2014 memcached >>> -rwxrwxr-x 1 root root 324 Mar 3 2014 munin >>> drwxrwxr-x 2 root root 4096 Mar 3 2014 munin-scripts >>> -rwxrwxr-x 1 root root 51582 Nov 4 2014 mysql >>> -rw-rw-r-- 1 root root 747 Mar 3 2014 mysql.cnf >>> -rwxrwxrwx 1 banana banana 3211 Mar 26 2014 ntpd >>> -rwxrwxr-x 1 root root 115 Mar 3 2014 powerdns >>> -rwxrwxr-x 1 root root 120 Mar 3 2014 powerdns-recursor >>> -rw-rw-r-- 1 root root 228 Mar 3 2014 README >>> -rwxrwxr-x 1 root root 577 Mar 3 2014 rpm >>> -rwxrwxr-x 1 root root 116 Mar 3 2014 temperature >>> >>> I'm quite sure that I m missing something of stupid >>> >>> 2015-09-30 23:38 GMT+01:00 Adam Armstrong <adama(a)memetic.org>: >>> >>>> Hi, >>>> >>>> There don't seem to be any application scripts correctly installed, so >>>> it isn't returning any data that will be used by an app pollers. >>>> >>>> i.e. : >>>> >>>> root@omega:/home/observium/dev# ls /usr/lib/observium_agent/local/ -l >>>> -rwxr-xr-x 1 root root 2910 May 15 2014 apache >>>> -rwxr-xr-x 1 root root 4234 May 15 2014 bind >>>> -rwxr-xr-x 1 root root 714 May 15 2014 dpkg >>>> -rwxr-xr-x 1 root root 102 May 15 2014 lmsensors >>>> >>>> >>>> adam. >>>> >>>> On 30/09/2015 23:18:16, Federico Olivieri <lvrfrc87(a)gmail.com> wrote: >>>> Debug output in attached, I had a look but no idea what the mean. Thank >>>> you!!!! >>>> >>>> 2015-09-30 23:00 GMT+01:00 Adam Armstrong <adama(a)memetic.org>: >>>> >>>>> You can run the poller in debug mode to see what, if anything, it >>>>> tries to do with the data : >>>>> >>>>> ./poller.php -h <device_id> -d >>>>> >>>>> adam. >>>>> >>>>> On 30/09/2015 22:58:51, Federico Olivieri <lvrfrc87(a)gmail.com> wrote: >>>>> Ok, >>>>> Telnet seems to work (see attachment), however, under application tab >>>>> I can read No applications found on this device. >>>>> >>>>> (By the way...thank you for your time!) >>>>> >>>>> 2015-09-30 22:30 GMT+01:00 Adam Armstrong <adama(a)observium.org>: >>>>> >>>>>> If it's set up correctly, you should get an "apps" menu populated >>>>>> with applications which are correctly returned. >>>>>> >>>>>> You can test the agent is returning data by telnetting to the agent >>>>>> port. >>>>>> >>>>>> adam. >>>>>> >>>>>> On 30/09/2015 22:17:59, Federico Olivieri <lvrfrc87(a)gmail.com> wrote: >>>>>> Ok guys. >>>>>> I managed to set-up the UNIX agent. It is running on the same machine >>>>>> that is acting as OBSERVIUM server (basically it is pooling itself on >>>>>> loopback interface). I copied the scripts >>>>>> into /usr/lib/observium_agent/local/ and they are executable. On observium >>>>>> web page I can see the agent execution time, however...no one graph related >>>>>> to the scripts copied is shown by observium. >>>>>> >>>>>> Below my php conf >>>>>> >>>>>> Any suggestion? >>>>>> >>>>>> >>>>>> ## Check http://www.observium.org/wiki/Configuration_Options for >>>>>> documentation $ >>>>>> >>>>>> // Database config --- This MUST be configured >>>>>> $config['db_host'] = 'localhost'; >>>>>> $config['db_user'] = 'root'; >>>>>> $config['db_pass'] = 'xxxxxx'; >>>>>> $config['db_name'] = 'observium'; >>>>>> >>>>>> // Base directory >>>>>> $config['install_dir'] = "/opt/observium"; >>>>>> >>>>>> // Default community list to use when adding/discovering >>>>>> $config['snmp']['community'] = array("public"); >>>>>> >>>>>> // Authentication Model >>>>>> $config['auth_mechanism'] = "mysql"; // default, other options: >>>>>> ldap, http-a$ >>>>>> >>>>>> // Enable alerter (not available in CE) >>>>>> #$config['poller-wrapper']['alerter'] = TRUE; >>>>>> >>>>>> // Set up a default alerter (email to a single address) >>>>>> $config['alerts']['alerter']['default']['descr'] = "Default Email >>>>>> Alert"; >>>>>> $config['alerts']['alerter']['default']['type'] = "email"; >>>>>> $config['alerts']['alerter']['default']['contact'] = " >>>>>> lvrfrc87(a)gmail.com"; >>>>>> $config['alerts']['alerter']['default']['enable'] = TRUE; >>>>>> >>>>>> // UNIX agent >>>>>> $config['poller_modules']['unix-agent'] = 1; >>>>>> >>>>>> // End config.php >>>>>> >>>>>> >>>>>> 2015-09-29 10:08 GMT+01:00 Federico Olivieri <lvrfrc87(a)gmail.com>: >>>>>> >>>>>>> Ok, >>>>>>> Thank for the info. I'll have a look >>>>>>> >>>>>>> Federico >>>>>>> >>>>>>> 2015-09-29 10:01 GMT+01:00 Adam Armstrong <adama(a)observium.org>: >>>>>>> >>>>>>>> To get NTP data to observium you need to be running the observium >>>>>>>> Unix agent on the device. >>>>>>>> >>>>>>>> This is required for both the native NTP graphing and graphing of >>>>>>>> things via munin. >>>>>>>> >>>>>>>> There is documentation for the Unix agent on the website. >>>>>>>> >>>>>>>> Adam. >>>>>>>> >>>>>>>> Sent with AquaMail for Android >>>>>>>> http://www.aqua-mail.com >>>>>>>> >>>>>>>> On 29 September 2015 12:56:55 Federico Olivieri <lvrfrc87(a)gmail.com> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Hi guys, >>>>>>>>> >>>>>>>>> Thanks for your reply. >>>>>>>>> Actually, I'm using Linux version* 3.2.0-4-amd64 >>>>>>>>> (debian-kernel(a)lists.debian.org <debian-kernel(a)lists.debian.org>) (gcc >>>>>>>>> version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.68-1+deb7u3* and >>>>>>>>> I running ntpd but the graphs are not displayed >>>>>>>>> >>>>>>>>> If I decide to run munin client on my server (I guess munin-node >>>>>>>>> packet) how can I integrate it on OBSERVIUM? >>>>>>>>> >>>>>>>>> Thanks >>>>>>>>> >>>>>>>>> Federico >>>>>>>>> >>>>>>>>> >>>>>>>>> 2015-09-28 22:03 GMT+01:00 Adam Armstrong <adama(a)observium.org>: >>>>>>>>> >>>>>>>>>> Alternatively, Observium can collect and display data from a >>>>>>>>>> munin client via the Unix agent, too. >>>>>>>>>> >>>>>>>>>> Adam. >>>>>>>>>> >>>>>>>>>> Sent with AquaMail for Android >>>>>>>>>> http://www.aqua-mail.com >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On 29 September 2015 12:43:08 am Michael <observium(a)smarsz.com> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>> If you use the unix agent (check_mk) it will detect ntpd >>>>>>>>>>> automatically and add graphing for it. Couldn't be easier. >>>>>>>>>>> >>>>>>>>>>> Assuming you are running ntpd on a unix variant. If it's an >>>>>>>>>>> appliance (trimble etc), then it might need some extra work to fetch via >>>>>>>>>>> snmp. >>>>>>>>>>> >>>>>>>>>>> Michael >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On 29 September 2015 6:37:14 AM AEST, Federico Olivieri < >>>>>>>>>>> lvrfrc87(a)gmail.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> Hi All, >>>>>>>>>>>> >>>>>>>>>>>> I'm trying to plot some graphs with Observium for my NTP >>>>>>>>>>>> server. I >>>>>>>>>>>> would do >>>>>>>>>>>> something similar to MUNIN. I tried to google it but I didn't >>>>>>>>>>>> find any >>>>>>>>>>>> useful information for my (low) level of experience. >>>>>>>>>>>> >>>>>>>>>>>> Can someone point me in the right direction? >>>>>>>>>>>> >>>>>>>>>>>> Thank You >>>>>>>>>>>> >>>>>>>>>>>> Federico >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>> >>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> observium mailing list >>>>>>>>>>>> observium(a)observium.org >>>>>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> observium mailing list >>>>>>>>>>> observium(a)observium.org >>>>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> observium mailing list >>>>>>>>>> observium(a)observium.org >>>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>>>> >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> observium mailing list >>>>>>>>> observium(a)observium.org >>>>>>>>> >>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>>> <http://postman.memetic.org/cgi-bin/mailman/listinfo/observium> >>>>>>>>> >>>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> observium mailing list >>>>>>>> observium(a)observium.org >>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>> >>>>>>>> >>>>>>> >>>>>> _______________________________________________ observium mailing >>>>>> list observium(a)observium.org >>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> observium mailing list >>>>>> observium(a)observium.org >>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>> >>>>>> >>>>> _______________________________________________ observium mailing list >>>>> observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>> >>>>> >>>>> _______________________________________________ >>>>> observium mailing list >>>>> observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>> >>>>> >>>> _______________________________________________ observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> >>>> >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> >>>> >>> _______________________________________________ observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> >> _______________________________________________ observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >

5 9

svn update problem
by Zach Underwood 01 Oct '15

01 Oct '15

As anyone else see this [root@observium2 observium]# svn update svn: E155036: Please see the 'svn upgrade' command svn: E155036: Working copy '/opt/observium' is too old (format 10, created by Subversion 1.6) observium version 0.15.9.7054 svn version 1.7.4 CentOS release 6.7 -- Zach Underwood (RHCE,RHCSA,RHCT,UACA) greenvilletowers.com My website <http://zachunderwood.me>

3 2

im seeing device down but they are not
by Casper Allerslev Jensen 01 Oct '15

01 Oct '15

over the last few days i have starting seen alert mails with device down.. but its not down.. and there is no recover.. anyone got a suggestion why that could be? I mean it could be a short connection problem but than i would assume to see recover mail aswell?

6 14

Long hostname eventlog
by Romain Winter 01 Oct '15

01 Oct '15

Hi list, Is it possible to edit some files, making the eventlog show the full hostname/IP? For example showing on-to the homepage the entity in stead of Device. > > 2015-10-01 09:01:31 short > longer.hostname.com > Device status changed to Up > King Regards, Romain Winter. -- OpenmindedIT <http://www.open-minded-it.nl> Adres: Aphroditestraat 23 5047 TW Tilburg tel: 0031 (0) 13 707 8093 fax: 0031 (0) 13 570 1113 Web: www.openmindedit.nl <http://www.open-minded-it.nl> E-mail: r.winter(a)openmindedit.nl <mailto:r.winter@openmindedit.nl> --- Dit bericht is slechts bestemd voor de geadresseerde en kan informatie bevatten die persoonlijk en/of vertrouwelijk is en die niet openbaar mag worden gemaakt. Indien u niet zelf de geadresseerde bent, wordt u erop gewezen dat verdere verspreiding, openbaarmaking of vermenigvuldiging van dit bericht verboden is. Indien u dit bericht per vergissing hebt ontvangen, verzoek ik u mij zo snel mogelijk op de hoogte te stellen en het originele bericht en eventuele kopieën ervan, te verwijderen. Op alle aanbiedingen, overeenkomsten , facturen en transacties van Open Minded IT ECS zijn onze algemene voorwaarden van toepassing. Deze kunt U inzien op http://www.open-minded-it.nl/index.php/algemene-voorwaarden/ op verzoek wordt een exemplaar U kosteloos toegezonden. Dank voor uw medewerking. Open Minded IT ECS Bezoek adres: Aphroditestraat 23 5047 TW Tilburg tel: 0031 (0) 13 707 8093 fax: 0031 (0) 13 570 1113 Web: www.open-minded-it.nl E-mail: info(a)open-minded-it.nl

1 0

Fwd: NTP Graphs
by Federico Olivieri 01 Oct '15

01 Oct '15

Hi All, I'm trying to plot some graphs with Observium for my NTP server. I would do something similar to MUNIN. I tried to google it but I didn't find any useful information for my (low) level of experience. Can someone point me in the right direction? Thank You Federico

4 16

More Observium integrations with rancid
by Robbie Wright 30 Sep '15

30 Sep '15

So we've got rancid integration working (thanks Adam and others) in Observium for all of our Mikrotik devices and it is working great. We've got a few Ubiquiti EdgeRouters (based on Vyatta) that we'd like to get hooked up with rancid as well, but the Observium integration confuses me a bit. Do we edit the cloginrc file with the info for how to log into EdgeRouters? I would have assumed we would normally use a different group to tell rancid how to pull config's but everything is just in the Observium group. How does everyone setup rancid to pull down more than one equipment manufacturer's gear? Has anyone pulled config's through rancid into Observium from EdgeRouters? Robbie Wright Siuslaw Broadband <https://siuslawbroadband.com> 541-902-5101

4 9

FW: Real time graphs on the ports not working
by Arya, Renuka [MED] 30 Sep '15

30 Sep '15

Hi All, Any word on this? Anyone seeing this issue? Regards Renuka ________________________________ From: Arya, Renuka [MED] Sent: Monday, September 28, 2015 9:32 AM To: observium-owner(a)observium.org Subject: Real time graphs on the ports not working Hi All, I am not able to see the real-time graphs on the port basis for all my network devices in Observium. It is just blank. Please see attachments for a port (Normal Graph and Real Graph). I am running Observium 0.15.6.6442. It used to work pretty smoothly previously. Please help. I would be requiring this feature for some demos we are planning in couple of weeks. Thanks! Regards Renuka ******************************************************************************** This e-mail is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged and confidential. If the reader of this e-mail message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is prohibited. If you have received this e-mail in error, please notify the sender and destroy all copies of the transmittal. Thank you University of Chicago Medicine and Biological Sciences ********************************************************************************

7 13

Re: [Observium] Port-Channels in Cisco devices
by Miguel Berniz 30 Sep '15

30 Sep '15

Hello again, No one has experienced this or can help? Thanks in advance Enviado de Samsung Mobile -------- Mensaje original -------- De: Miguel Berniz <mberniz(a)gibfibrespeed.net> Fecha:22/09/2015 23:20 (GMT+01:00) Para: observium(a)observium.org Asunto: Port-Channels in Cisco devices Hello, I installed community version through Turnkey appliance and drive a test with 25 network devices. Then I ran unto subscription version and I have noticed port-channel members are not appearing anymore in the port list, for example, in a 4500 VSS. The exaclly same devices are correctly showing port-channel and interface members top right column. What could this be caused by? Thanks in advance, Miguel

2 3

Pushover (woohoo!)
by Tim Vaughan 29 Sep '15

29 Sep '15

Ok, I see that Pushover is now a contact method. Great! Erm, how do I make it work? I've tried creating a new application and putting the API token in the "Destination" field, but it doesn't appear to work that way. What goes in the Destination field? Tim

7 11

Small feature request
by Attila Nagy 28 Sep '15

28 Sep '15

Hi All! One colleague of mine recently met this little (let's call it) glitch, and as he is rather new to the software, he had a hard time solving it (he had to ask me to get introduced into the concept of disabled devices, and the place to search for :)). So when one wants to add a new device, and it already exists, Observium writes a simple error message, like: "Already got device x.y.z.net." What I would like to suggest is two things: 1. make the device name in this error message clickable as anywhere else. This way the novice user can click on the host and see that it's really there 2. if the device is disabled, maybe indicate it in this message, like "Already got device x.y.z.net only disabled" This way the novice user would see why he didn't found the device in the first place. Now that I think of it again, the second one is rather overkill, but the first one would be an easy but logical advancement. Regards, Tylla

1 0

Geolocation and Mapping
by Adam Armstrong 28 Sep '15

28 Sep '15

Hi Guys, As some of you might already have noticed, MapQuest have changed the policies on their geolocation API, breaking our previous geolocation defaults. We briefly switched the default API to Open Street Maps, but due to the large Observium userbase they weren't able to support our request load, and we've since had to switch to Yahoo's geolocation API. If you've kept the subscription version up to date, you should already have these new defaults. The community version can change the geolocation API in the config.php, but doesn't currently support the Yahoo API, which will come in the next release. Details for settings can be found at : http://www.observium.org/docs/config_options/#syslocation-configuration Observium also has support for Yandex and Google geolocation, and though Google's geolocation works best, it can only be used with a commercial license, so that can only be enabled by organisations with such a license. This means that some addresses which previously geolocated may not geolocate properly now (each API has its own quirks when it comes to parsing addresses, so ones which worked before may not work now, and vice-versa!). We're investigating setting up our own geolocation and map imaging servers, along with switching to a new mapping library to try to remove reliance on external organisations. Thanks, adam. Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&ut…]

1 0

Any Materials for Observium new starter?
by Peter Ekwuno 28 Sep '15

28 Sep '15

Hi All, My company just decided that we will be using Observium as the network monitoring on new network environment and the server hosting the Observium is set up and running by one of the Engineers. However, I will be the engineer managing the platform and I’m very much new to the product. More so, I have looked on the web site and Google, it seems that there aren’t enough comprehensive video or guide on how to manage the product bearing in mind that I am new to Linux platform. Please can some one point me to the right direction to get the basic materials needed for Observium? Best regards, Peter Ekwuno SOC Engineer [Description: cid:image002.png@01CF4E86.2063A860]<http://www.easynet.com/> A. St James House, Oldbury, Bracknell ,RG12 8TH From: observium [mailto:observium-bounces@observium.org] On Behalf Of Casper Allerslev Jensen Sent: 26 September 2015 16:34 To: Observium Network Observation System Subject: Re: [Observium] im seeing device down but they are not Hi Adam, This is the screenshot.. [Description: Image removed by sender.] It clearly shows the server down... and i can access it just find and my client sees it just fine [Description: cid:14451e289c512813975116b18116d696d756e23d@zimbra] ________________________________ Fra: "Adam Armstrong" <adama(a)memetic.org> Til: observium(a)observium.org Sendt: lørdag, 26. september 2015 17:16:14 Emne: Re: [Observium] im seeing device down but they are not Hi Casper, What do you see in alert log for the device in question? Thanks, adam. Sent from Mailbird<http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campai…> On 26/09/2015 18:07:42, Casper Allerslev Jensen <casper(a)dingit.dk> wrote: over the last few days i have starting seen alert mails with device down.. but its not down.. and there is no recover.. anyone got a suggestion why that could be? I mean it could be a short connection problem but than i would assume to see recover mail aswell? _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium This email and any attachments may be confidential and/or legally privileged. If you have received this e-mail and you are not a named addressee, please inform the sender of this email by sending a return email to the address above and then delete the e-mail and your response from your system. If you are not a named addressee you must not use, disclose, distribute, copy, print or rely on this e-mail. Any views or opinions presented are solely those of the author. Any statements made, or intentions expressed in this communication may not necessarily reflect the view of Easynet. No content herein will bind Easynet or any associated company unless confirmed by the execution of a formal contract by Easynet. Any figures or amounts given in this email are quotations only and are subject to change. Although Easynet routinely screen for viruses, addressees should scan this e-mail and any attachments for viruses. Easynet make no representation or warranty as to the absence of viruses in this e-mail or any attachments. Please note that to ensure regulatory compliance and for the protection of our customers and business, we may monitor and read e-mails sent to and from our server(s). Easynet Limited (registered number 02954343) and Easynet Global Services Limited (registered number 08458875) are incorporated in England and Wales and share the same registered office at St. James House, Oldbury, Bracknell, Berkshire, RG12 8TH

2 1

Separate emails for alerts sent to contacts
by Christopher Pole 28 Sep '15

28 Sep '15

Hi, I'm looking at using Observium contacts + alerts to replace some alerting we do for customers using Nagios. Is it possible to send a separate email to the primary device contact and any additional contacts specified for alerts in the contact section rather than populating the to field with all recipients on a single email? If not would this be difficult to implement? We'd prefer not to expose the internal email address that receives our alerts to our customers if possible. Thanks, Chris

1 0

Observium Graph Issue
by Namdev Rathod 25 Sep '15

25 Sep '15

Hi, I have configured observium on aws ec2 instance, also add hosts in that with snmp installed. I have also tried to check with snmpwalk command on both side, its working fine. But issue with graph, on web interface of observium, i am not able to view graphs. Please help me. -- Thanks, Namdev Rathod

3 2

Observium boucing on ifalias
by Raphael Maunier 25 Sep '15

25 Sep '15

Hi there, We have a strange issue with the ifalias. We have one Juniper EX4550 with multiple customers on it. There was a bad character in the description : description "Cust: [FIBRE] {XXX} Paris - Zayo Cid:XXXXX Cable:R03110-fo-9-10�”; Observium was bouncing on the if desc. As soon as I change it, no bouncing . Not sure if it’s a bug report, but I just share it here :) Best, Raphael

1 1

add storage info to alert mail
by Casper Allerslev Jensen 24 Sep '15

24 Sep '15

Hi observiumers.. I have a storage_perc alert which sends me a nice email when my storage is above 95%. is it somehow possible to get the actuall storage used and left included in the mail. Since its a procentage there could still be potiential 50GB og free space left.. it all depends on the original size.

1 0

Graphing sum total of Current and Power
by Andrew Plas 24 Sep '15

24 Sep '15

Would it be possible to add a Total Graph for specific Heath statistics, similar to how the total graphs are displayed for Peering, Transit, and Core port types? What I am interested in is essentially adding values already collected by Observium from a handful of devices (rack PDU's) to determine the combined Current in amps and Power in watts to graph and track power consumption across an entire row or even datacenter. We can see this information per-rack from the PDU device already added to Observium, but for our datacenter managers it would be useful to track power consumption across the whole room or suite. In several of our POPs power is provided so we cannot poll the UPS itself- only our own rack PDUs connected to the facility's power bus. Even then, most have A and B side power so we have two PDUs per rack. To the end, I have created a device group by sensor sorting "pdu" device names and filtering for their output values. However, the built-in aggregate graphs show each device's data on one graph and doesn't combine them for a total. Further, my filter seems to pull many values labeled "Output" including voltage and amperage as well as wattage. Any suggestions to refine my filter to get one group for Amps and another for Watts? Please see the screenshots below. Most PDU's are APC model AP8941. I admit this would really only be useful for the "Power" and "Current" health monitors, as items like voltage and temperature are really only useful per-device. Even then, these total graphs would have the most value being filtered to a specific set of devices and likely by location. Maybe a total graph display under /groups may be more useful than one under /health/metric=power or /health/metric=current? Thank you! https://observium/group/group_id=6/ https://observium/group/group_id=6/view=basic/agg_graph=graph/

2 3

Alert notification
by Ondrej Beran 24 Sep '15

24 Sep '15

Hello, today I have updated version 6531 to 7038 and I still receive the same alert notification every 5 minute. Is it possible to change this notification to receive this alert only once when the service is down and than when it is renewed, not repeatedly ? defaults.inc.php $config['alerts']['interval'] = '31536000'; // How frequently to re-send a notification for a continuing alert condition // In seconds. Default is 1 day. Thank you Ondrej

5 7

Problem on syslog with HP devices
by Kleber C. S. Coelho 23 Sep '15

23 Sep '15

Dears, good morning! We have a problem in the syslog system. The logs of HP network equipment appear with a 'prefix' %% 10 in the attribute 'program' and this greatly hinders the display of logs and selecting the 'program' from the menu. Please could check this question for future updates? Hugs. 22-09-2015 13:52:10 core-dc Informational (6) %%10SHELL/6/SHELL_CMD(L) : -Task=vt0-IPAddr=**-User=**; Command is jumboframe enable 22-09-2015 12:16:33 core-pusp Notification (5) %%10CFM/5/CFM_SAVECONFIG_SUCCESS : Configuration is saved successfully. 22-09-2015 12:16:33 core-pusp Notification (5) %%10CFGMAN/5/CFGMAN_CFGCHANGED(L : -EventIndex=2-CommandSource=1-ConfigSource=2 is changed. 22-09-2015 11:52:57 core-eesc Notification (5) %%10IFNET/5/LINEPROTO_UPDOWN(L) : Line protocol on the interface Vlan-interface122 is UP. 22-09-2015 11:52:57 core-eesc Error (3) %%10IFNET/3/LINK_UPDOWN(L) : Vlan-interface122 link status is UP. []´s ________________ Kleber C. S. Coelho USP - São Carlos 16.3373-8870

1 0

Netscaler Virtual Machine!
by Svensson Fredrik A 23 Sep '15

23 Sep '15

Hi There! We have some Netscaler virtual appliances that doesnt show the Load Balancer Tab, any ideas why? [cid:image001.png@01D0F136.2381C6E0] Regards Fredrik Från: observium [mailto:observium-bounces@observium.org] För Svensson Fredrik A Skickat: den 15 september 2015 10:20 Till: Observium Network Observation System <observium(a)observium.org> Ämne: Re: [Observium] Alerting from eventlog? I dont seem to get this working for me, where does the Status_event comes from? Regards Fredrik Från: observium [mailto:observium-bounces@observium.org] För Andrew Plas Skickat: den 12 september 2015 05:00 Till: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Ämne: Re: [Observium] Alerting from eventlog? Thanks for the lead, Andre! I had to change the conditions to status_event equals alert and it works beautifully. On Fri, Sep 11, 2015 at 2:03 PM, Andre Geißler <andre(a)geisslermail.de<mailto:andre@geisslermail.de>> wrote: I did it that way Name: ASA Failover Test: status_event equals warning Device Match: hostname match blabla Entity Match: status_descr match *primary* Cheers, Andre _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 4

Observium Support
by Mulenga Mumba 23 Sep '15

23 Sep '15

Hi, Please help me with support email address for Observium, I would like to request for customisation of some functions such as reports. Thanks, Mulenga Mumba, NOC Technical Supervisor Africonnect Zambia - A VODACOM Group Company Orange Park, Plot 35185, Alick Nkhata Road, Lusaka, Zambia Phone: +260 95 3 572 713 +260 211 843 298 Email: mulenga @africonnect.co.zm

2 2

Procedure for observium support.
by Chaman Rathee 23 Sep '15

23 Sep '15

I have a question that What is procedure to take support from observium? We have purchased a professional support subscription. It is valid upto 2016-09-07. ............. With Warm Regards, Chaman Rathee [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

3 2

Port-Channels in Cisco devices
by Miguel Berniz 22 Sep '15

22 Sep '15

Hello, I installed community version through Turnkey appliance and drive a test with 25 network devices. Then I ran unto subscription version and I have noticed port-channel members are not appearing anymore in the port list, for example, in a 4500 VSS. The exaclly same devices are correctly showing port-channel and interface members top right column. What could this be caused by? Thanks in advance, Miguel

1 0

Connect via SSH Feature
by Johnson, Edward A. 22 Sep '15

22 Sep '15

Hopefully this is a newer feature, otherwise I totally overlooked this over the past year! [cid:ACFFBBBC-9380-48CA-9824-300B0B1F51C2] Is there a way to customize these connect commands? We have different usernames for our switches and linux boxes than the username that we log into Observium.

4 7

revision 7026. maps problem
by Andrew Colin 22 Sep '15

22 Sep '15

Hi Guys I did an svn up today and it upgrade to revision 7026(professional edition) But now the maps are all zoomed in(see below) Any idea why

3 4

Process to take Observium Support
by Chaman Rathee 22 Sep '15

22 Sep '15

Dear Team, Please suggest complete process to take support from observium. We have already purchased professional subscription. It is valid upto 2016-09-07. Kindly suggest process to take support. Please find attached file for your reference. ......... With Warm Regards, Chaman Rathee Mob. No. 9560055816 [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

1 0

weather overlay
by Fernando Fuentes 22 Sep '15

22 Sep '15

Is there a way to the world map on the observium web ui? IE: http://openweathermap.org/maps Regards, -- Fernando Fuentes Supervisor & Senior Systems Administrator Email: ffuentes(a)aasteel.com American Alloy Steel, Inc. Houston, Texas Website: http://www.aasteel.com Phone: 713-744-4222 Fax: 713-300-5688

1 0

Observium :- Server location sign problem.
by Chaman Rathee 22 Sep '15

22 Sep '15

My some server are located at Gurgaon and rest are at Chennai location. Servers located at Gurgaon are showing green circle with no. of server in map. But Others located at Chennai are showing green google map pointer icon without no. of server. I want to do change Chennai location sign ( same as Gurgaon location) ? Location sign also enclosed with mail. Please check and help us. ......... Chaman Rathee [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

2 1

SVN problems?
by Eduardo Schoedler 21 Sep '15

21 Sep '15

Hi, Is there some problem with svn server? root@lin:/opt/observium# svn update && ./discovery.php -h none -u Updating '.': svn: E000104: Unable to connect to a repository at URL 'http://svn.observium.org/svn/observium/trunk' svn: E000104: Error running context: Connection reset by peer Thanks. -- Eduardo Schoedler

2 2

Diff. b/t location sign and circle sign?
by Chaman Rathee 19 Sep '15

19 Sep '15

What is difference in location sign and circle sign on observe graph? Location Sign :- [cid:image001.png@01D0F2E9.76F4F090] Circle Sign :- [cid:image002.png@01D0F2E9.76F4F090] ............. With Thanks and Regards, Chaman Rathee MoB No. :- 9560055816 [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

2 1

Observium host located at different location
by Chaman Rathee 19 Sep '15

19 Sep '15

Dear Team, My Observium hosts are showing at north atlantic Ocean where server is located at Gurgaon,India. SNMP Configuration file is /etc/snmp/snmpd.conf of host have only single blue line. rocommunity <community_name> [cid:image001.png@01D0F082.6FD9BDE0] Please suggest needful on priority basis. .......... With Warm Regards, Chaman Rathee Mob. No. :- +91-9560055816 [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

4 10

Alerts
by Erwin Botas 19 Sep '15

19 Sep '15

Hi, we would like to filter alarms on our air conditioning units based on the status as many are redundant but the sensors are always on and if the unit is standby for example the temp or humidity limits can be easily raised, at his moment the sensors and status are different entities and the condition s can't be settled Any clue how to make this? Sent from my iPhone Erwin Botas Gerente tecnologías de información [http://www.criticalcolocation.com/firma/logo.jpg] Tel.: +506 2010-5050 • Cel.: +506 8982-4885 • Fax.: +506 2223-7055 San José, CR • www.criticalcolocation.com [http://www.criticalcolocation.com/firma/line.jpg] NOTA DE CONFIDENCIALIDAD: "La información contenida en este mensaje y sus adjuntos es estrictamente confidencial y se dirige exclusivamente a su destinatario. Si usted no es el destinatario indicado, cualquier divulgación, copia, distribución o uso del contenido de este documento es prohibido y será sancionado de acuerdo con la ley. Si recibió este mensaje por error, debe notificarlo de inmediato al remitente y destruirlo".

4 6

Disabling polling on large number of ports
by AJ Schroeder 18 Sep '15

18 Sep '15

Hello list, I have just added a bunch of our end user access switches to Observium (thanks to the devs adding Nortel support!). Anyway, I don't want to be alerted or notified if those particular ports go up or down. The only way I know how to stop alerting on ports is to toggle the alerts field in the ports properties of the specific device. However, whenever I select all the ports on a device that has a large number of ports (over 300) all the ports show that they are toggled to off, then I click save. When the page refreshes I only see about two-thirds of them are toggled off, the rest of them are still set to poll or alert. When I manually toggle some ports and click save, the setting doesn't save. Any help or insight on this would be appreciated. AJ Schroeder

4 7

added a HP server over snmp
by Casper Allerslev Jensen 18 Sep '15

18 Sep '15

Hi all, I have just added a HP server. added SNMP and set it up. The server connected fine to observium. Now i see Observium has support for HP but the data im getting is pretty mandatory server stuff so im wondering what the HP support is added? or did i do it wrong? As an example i was hoping to get some RAID info on the RAID 1 running on the server with the controller that was shipped. But all i see is C:\ which won't alert me if a disk fail.

5 11

odd install issue with the DB
by Lyndon Labuschagne 18 Sep '15

18 Sep '15

Hi I have no idea what I have done or missed? I have created the user and I can login to the observium database as the observium user, root@nms:/opt/observium# php includes/update/update.php $config['db_host'] = 'localhost'; $config['db_user'] = 'observium'; $config['db_pass'] = ’Not-The-Password'; $config['db_name'] = 'observium'; // Base directory $config['install_dir'] = "/opt/observium"; // Default community list to use when adding/discovering $config['snmp']['community'] = array(“public"); // Authentication Model $config['auth_mechanism'] = "mysql"; // default, other options: ldap, http-auth, please see documentation for config help // Enable alerter (not available in CE) #$config['poller-wrapper']['alerter'] = TRUE; MySQL Error: Access denied for user 'root'@'localhost' (using password: NO) If I try to load the page from my browser I see this $config['db_host'] = 'localhost'; $config['db_user'] = 'observium'; $config['db_pass'] = 'Not-The-Password'; $config['db_name'] = 'observium'; // Base directory $config['install_dir'] = "/opt/observium"; // Default community list to use when adding/discovering $config['snmp']['community'] = array(“public"); // Authentication Model $config['auth_mechanism'] = "mysql"; // default, other options: ldap, http-auth, please see documentation for config help // Enable alerter (not available in CE) #$config['poller-wrapper']['alerter'] = TRUE; MySQL Error: Access denied for user 'lyndonl'@'localhost' (using password: NO) Why it references my username via my browser is even more odd to me?

2 2

All obserdium devices are located at latitude 37.7463058 and longitude 37.7463058
by Chaman Rathee 18 Sep '15

18 Sep '15

Observium is showing my all server at :- R. Francisco de Arruda Furtado 6, 9500-605 Ponta Delgada, Portugal Latitude: 37.746306 | Longitude: -25.666857 This is default latitude and longitude in cinfig.php $config['geocoding']['default']['lat'] = "37.7463058"; // Default latitude $config['geocoding']['default']['lon'] = "-25.6668573"; // Default longitude .......... With Best Regards, Chaman Rathee Mob. No. +9109560055816 [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

1 0

are page counts possible on a per user basis (in adressbook) of a Ricoh / Aficio MP c305 printer?
by ecaroh 17 Sep '15

17 Sep '15

We got an Aficio MP C305 Printer where we want to get a monthly automated report of printed pages (bw/color) based on a per user basis (addressbook / print code) to make a print accounting possible. We still can count total numbers (also of all in one types like fax, copy, print and divided in colour/bw counts), but no counts on a per user basis. Does anybody knows whether it is generally possible to have per user counts (based on printer addressbook and user print code) and if so is there an oid? We do not need that functionality directly in observium… cause this is not monitoring but reporting, but it would be nice to get them via snmp automated monthly. Thanks in advance. ecaroh — sample for known oids for getting overall general counters. ## AFICO PAGECOUNTERS OIDDEVTOTAL="SNMPv2-SMI::enterprises.367.3.2.1.2.19.5.1.9.1" OIDCOPYSW="SNMPv2-SMI::enterprises.367.3.2.1.2.19.5.1.9.3" OIDCOPYCL="SNMPv2-SMI::enterprises.367.3.2.1.2.19.5.1.9.5" OIDPRTSW="SNMPv2-SMI::enterprises.367.3.2.1.2.19.5.1.9.9" OIDPRTCL="SNMPv2-SMI::enterprises.367.3.2.1.2.19.5.1.9.11" OIDFAXSW="SNMPv2-SMI::enterprises.367.3.2.1.2.19.5.1.9.6" PRINTER="aio.office-factory.net“ after getting counters we make calculations with difference between now and the day before. Output via E-Mail: PAGES PRINTED SINCE 20150912 Total: 303 Print_SW: 134 Print_color: 78 Copy_SW: 45 Copy_color: 34 Fax_SW: 12

3 2

New Install Alerts Rebuild not Matching
by Cameron Murray 17 Sep '15

17 Sep '15

Guys, We've done a fresh install for a customer and created a sample offline rule however when we run the rebuild the output states it matched however under the alert checks the device count is still 0 We've just recreated the DB and all devices with the same outcome. [cid:image001.png@01D0F068.E9049100] [cid:image002.png@01D0F068.E9049100] Regards, Cameron Murray Remote Support Engineer How am I doing? Please click here<http://www.techpath.com.au/contact-us/feedback/> to rate my work. [cid:image003.png@01D0F068.E9049100]<http://www.techpath.com.au/> P 1300 033 300 F 07 3809 3999 E cameron(a)techpath.com.au www.techpath.com.au<http://www.techpath.com.au> Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]<http://www.facebook.com/techpathau> [Twitter]<http://twitter.com/techpathau> [LinkedIn]<http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd.

3 5

geomapping stopped to work
by Alessandro Arciero 17 Sep '15

17 Sep '15

Hello, geomapping stopped to work after (I think) a svn update. With the same overidden (working well) location configured in about 100 devices, the new devices are not mapped (message: not found) the geolocalization is enabled. I solved with the lat, lot values. Attachements are self-explanatory :-) tnx alessandro arciero [cid:85329DA6-2C7B-48BA-9CD5-03F5D867586A][cid:C4A8EE78-1CD7-4576-81F8-F067C0AF8312] Alessandro Arciero Networking Management Multilink Friuli S.r.l. Attività di direzione e coordinamento Serenissima Partecipazioni S.p.A. Via Marconi 85 | 33010 Tavagnacco (UD), Italy One number/Tel. +39 0432 498511 | Fax +39 0432 498585 Email alessandro.arciero(a)multilinkfriuli.net<mailto:alessandro.arciero@multilinkfriuli.net> | www.multilinkfriuli.net<http://www.multilinkfriuli.net> Reg. Imprese di UD C.F./P.I. 02271850303 - R.E.A. di UD 248194 | Capitale sociale Euro 50.000,00 i.v. The information contained in this e-mail message and inside the respective attachments are confidential and reserved and are strictly for exclusively use by the intended recipient. The opinions therein and in case expressed, are those of the author: therefore the message doesn’t represent contractual commitment between Multilink Friuli S.r.l. and the recipient, and the company assume no responsibility regard the contents of the text and respective attachments, nor for any interception, changes or damages. Please don’t make copies, forward to thirds or conserve this message if you are not the right recipient. In case you incorrectly received this message, please resend to sender and erase it immediately and permanently from your personal computer.

4 6

Geolocation bugs
by Attila Nagy 17 Sep '15

17 Sep '15

Hi Adam and everyone! I have two small bugs to report. I'm using Observium CE 0.15.6.6430, I'm closely following the mail list, but if the below mentioned glitches/bugs were between solved, then sorry for wasting your time. 1. I had this problem for longer, but now I found the way to formulate it properly. We have sysLocation strings alike this: Qualitis Iroda / Iroda - 1131 Budapest, Béke utca 116 [47.541773,19.085868] Now when I check the "Geolocation" tab in the "Device Settings" I see following in the "Last Update Status": Geocoding ENABLED, try detect device coordinates: by REVERSE query (API: MAPQUEST, LAT: 47.541773, LON: 19.085868) - FOUND GEO API REQUEST: http://open.mapquestapi.com/nominatim/v1/reverse.php?format=json&accept-lan… GEOLOCATION: Hungary (Country), Unknown (State), Budapesti kistérség (County), Budapest (City) GEO COORDINATES: 47.54163 (Latitude), 19.0859 (Longitude) The problem as I see, is that after using the coordinates given in the sysLocation string to make a reverse query to lookup the Country, State, County etc., the geocoding API returns some coordinates which corresponds to THEIR found geolocation. But the geocoding API sometimes can give really offset coordinates, especially for some bigger sites, where it gives back the entrance. So if there are coordinates specified in sysLocation, then they should be used to pinpoint the device, no matter what the geocoding API says. PS: the documentation also says: "But observium anyway will store in DB specified coordinates." But this is currently not true. 2. I stumbled upon this while trying to get the data out of the Last Update Status Field for previous bug. The fields in the "Geolocation" tab in the "Device Settings" are marked with attribute disabled="disabled", and if something should be made writable, then this attribute is removed. I would suggest using the readonly attribute, as that would enable focusing and selecting from the given field. Not to mention the pure logic would tell the same, those fields are unmodifiable, so readonly should be used. Regards, Attila

2 2

Subinterfaces in "down" state
by Bjoern Engels 17 Sep '15

17 Sep '15

Dear list, Observium reports sub-interfaces as down even if the parents are administratively down, ex.: set interfaces ge-0/0/0 disable set interfaces ge-0/0/0 unit 0 family ethernet-switching port-mode \ access This raises an alert for ge-0/0/0.0 Is it possible to ignore sub-interfaces if the parents are admin down? BR Björn -- Bjoern Engels OpenIT GmbH engels(a)openit.de In der Steele 33a-41 PGP keyID 0x67504AC1 D-40599 Duesseldorf ________________________________________________________________________ HRB 38815 Amtsgericht Duesseldorf USt-Id DE 812951861 Geschaeftsfuehrer: Oliver Haakert, Maurice Kemmann

1 0

Missing memory history
by Jason Vanlandingham 17 Sep '15

17 Sep '15

I recently made some device changes and ran *discovery.php -h all* and *poller.php -h all*. Shortly after that I noticed that on one Windows 7 Pro box I'm monitoring, I no longer have any physical memory in the memory graph, just virtual memory. The entire history of it disappeared, and it hasn't started new or anything like that. I checked permissions on that workstation's rrd directory, and all looks good. I do have some backups of the rrd directories. Should I restore?

1 0

NOC display for specific Graphs
by Ron Culler 17 Sep '15

17 Sep '15

I'm looking to see if the ability exists to create a group with only a specific set of graphs based on an App. Then be able to assign that group to a user to view Ron Culler

5 12

RANCID integration
by Robbie Wright 16 Sep '15

16 Sep '15

Been hacking around with rancid for a bit and stuck on this step: Run this command to create the folder structure: su - rancid /var/lib/rancid/bin/rancid-cvs It is asking for a password, presumably for rancid, which we don't have. Again presuming here, that it was created by the installer. Trying hard to follow the instructions (exactly) and this is where I'm getting hung up. Thanks ahead of time for the help. Robbie Wright Siuslaw Broadband <https://siuslawbroadband.com> 541-902-5101

3 9

aacraid under linux
by Nikolay Shopik 16 Sep '15

16 Sep '15

Anyone running RAID within aacraid and have working snmp sub-agent? I had working snmp under windows machine, but that include installing storage manager, does same apply to snmpd under linux?

1 0

Fwd: Does observium support snapshot.
by Varun Nair (Tech-OPS) 16 Sep '15

16 Sep '15

Hey All, Firstly, a big kudos to observium and for making the life of a n/w engineer tad better. :) Now to my query, I have a Subscription Edition installed. Was wondering if there is a way to setup two instances say master/slave where the master polls the data and sends a periodic snapshot to the slave. This is basically for backups. Any pointers in this regard would be much appreciated. Feel free to revert if any questions. Thanks Varun Nair -- ------------------------------------------------------------------------------------------------------------------------------------------ This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Although Flipkart has taken reasonable precautions to ensure no viruses are present in this email, the company cannot accept responsibility for any loss or damage arising from the use of this email or attachments

5 5

Support for EMC Isilon & NetApp cDOT
by Jesper Frank Nemholt 16 Sep '15

16 Sep '15

Hi! I saw on an old thread that it's a know fact that NetApp cDOT doesn't work well, apparently due to changes in the MIB from NetApp so they don't use the normal structure anymore. A case was opened with NetApp.....was there any traction on that so far ? Secondly, with Isilon it does pull a lot of info by default, but due to Isilon using something called SmartConnect which basically is a round-robin DNS, if you use the cluster name you get a new node every time which confuses Observium quite a lot. Is there a way to make it somehow consolidate or average the data from all nodes in a cluster so I don't have to create each node individually ? /Jesper

1 0

Match for Cisco routers but not switches?
by Andrew Plas 16 Sep '15

16 Sep '15

I am looking to create an alert checker to send an alert when an Ethernet interface on a Cisco IOS router goes down- for example when the router is still up and available in monitoring, but a physical link is down due to a local switch failure, carrier CPE down, peer (unamanaged) router down... We receive syslogs of course, but these can occasionally get lost in the flood and not noticed as actionable by NOC staff. Is there an effective way to make a device match for Cisco routers, but not Cisco switches? The OS type both show up as "ios", and I haven't found something router-specific to successfully match on. I can do this individually by device name, but unfortunately our naming scheme isn't specific enough to match them all with *rt* or *wan or similar. As you can see below, I set the device match to "os equals ios" which includes switches that have a ton of link-down-but-enabled ports on them! Thank you, Andrew [image: Inline image 2]

7 10

Show client *rate* on wireless clients graph
by Tim Vaughan 15 Sep '15

15 Sep '15

I'm using Observium to track wireless clients on our Cisco wireless controller. It's very useful. However, when I look at the longer-term graphs (monthly, yearly etc.) it's less useful because I'm not sure what it's showing. Is it clients per day, per week or what? For an example, see: https://dl.dropboxusercontent.com/u/3183918/apelmRwNW7.png. Is there a way to get the legend show the rate rather than just a plain number? -- Mobile: 07868246225 Skype: tvaughan Twitter: twitter.com/tvaughan

2 3

Re: [Observium] observium Digest, Vol 62, Issue 103
by Nate Mellendorf 15 Sep '15

15 Sep '15

Adam, That makes sense. As much as modern technology makes it seem otherwise, someone always needs to spend the time and code it into existence. With the mibs, is it something we would expect to see in time? Is there a way we could help expedite the coding process? I'm curious if there's a way we can contribute to your efforts. If so, please let me know. I'd be happy to take it to my team. We've discussed it once already, and would really like to see additional stats on our kemps. Thank you! Nate Mellendorf | NETWORK ANALYST | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 www.NetgainHosting.com The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure. If you have received this message in error, please notify the sender immediately and delete the original. Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited. -----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of observium-request(a)observium.org Sent: Tuesday, September 15, 2015 1:02 PM To: observium(a)observium.org Subject: observium Digest, Vol 62, Issue 103 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: KEMP MIBs Attached (Adam Armstrong) ---------------------------------------------------------------------- Message: 1 Date: Tue, 15 Sep 2015 19:02:00 +0100 From: Adam Armstrong <adama(a)observium.org> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] KEMP MIBs Attached Message-ID: <14fd22ba5c0.2779.11b54b3dd25b712395dab9818c67596f(a)observium.org> Content-Type: text/plain; charset="utf-8"; Format="flowed" Hi, MIBs are only a small part of the process. Code needs to be written to support new things. Adam. Sent with AquaMail for Android http://www.aqua-mail.com On 15 September 2015 6:44:20 pm Nate Mellendorf <Nate.Mellendorf(a)netgainhosting.com> wrote: > Team, > > I've attached the MIBs that can be found on the KEMP load master > support page. > > Do you know if it's possible to have these added to Observium? > Observium works great for Netscaler, so we're hoping it can do the > same for Kemp. > > I'm not sure if that's possible with what's provided, but I thought > I'd send it your way and see what can be made of it. > Please let me know if additional info is needed. > > Regards, > > Nate Mellendorf | Network Analyst | Netgain > 720 West Saint Germain Street | St. Cloud | MN | 56301 > Phone: 320.251.4700 x183 | 877.797.4700 x183 > <http://www.netgainhosting.com/> www.NetgainHosting.com > > > _____ > > The information contained in this email message is for the designated > recipient only and may be privileged, confidential, and protected from > disclosure. If you have received this message in error, please notify > the sender immediately and delete the original. Any dissemination, > distribution, copying or other use of this message or any information > contained within is strictly prohibited. > > > > > ---------- > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

1 0

KEMP MIBs Attached
by Nate Mellendorf 15 Sep '15

15 Sep '15

Team, I've attached the MIBs that can be found on the KEMP load master support page. Do you know if it's possible to have these added to Observium? Observium works great for Netscaler, so we're hoping it can do the same for Kemp. I'm not sure if that's possible with what's provided, but I thought I'd send it your way and see what can be made of it. Please let me know if additional info is needed. Regards, Nate Mellendorf | Network Analyst | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 <http://www.netgainhosting.com/> www.NetgainHosting.com _____ The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure. If you have received this message in error, please notify the sender immediately and delete the original. Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited.

2 1

After server-deletion, I have a dis-associated port shown as down
by Pål Rydningen 15 Sep '15

15 Sep '15

Hi I have deleted a server from the device-list, but somehow a single port escaped the deletion, and is now shown as "Port Down" without being attached to any device. Its called "Vmnic1" and the url to it is " http://observium-ip/device/tab=port/port=352173/" How can I identify and "clean up" the entry in question? -- Pål R.

2 1

View and Sound for NOC Dashboard
by chott＠praha1.net 15 Sep '15

15 Sep '15

Hello Team, We are plaining show Observium Dashboard to Plasma TV Can i change Default Views? Can observium start Sound Alarm for new down device Same like in Cacti? Tom

3 2

Graphs not drawing. Values show as -nan
by Yaad Taieb 15 Sep '15

15 Sep '15

Hi all, I went through the archive for 3 consecutive days, and tried the following steps there outlined. None of which has helped my situation. Its run on: Ubuntu 14.04 All the dependencies have been downloaded as you can see: imagemagick is already the newest version. mtr-tiny is already the newest version. php5-json is already the newest version. python-mysqldb is already the newest version. rrdtool is already the newest version. whois is already the newest version. fping is already the newest version. php5-mcrypt is already the newest version. graphviz is already the newest version. libapache2-mod-php5 is already the newest version. mysql-client is already the newest version. mysql-server is already the newest version. php-pear is already the newest version. php5-cli is already the newest version. php5-gd is already the newest version. php5-mysql is already the newest version. snmp is already the newest version. subversion is already the newest version. ipmitool is already the newest version. Screenshots: php.config: http://i61.tinypic.com/99q72r.png apache2 000-default.conf: http://i59.tinypic.com/m8k7sx.png ./poller.php -h all -d: http://i59.tinypic.com/ok4k5h.png ./discovery.php -h all -d: http://i60.tinypic.com/2rwnbc7.png This is what Observium actually looks like after following all the steps in the installation guide: http://i62.tinypic.com/14ndcw7.png First time working with Ubuntu and php, well, first time working with everything that was outlined in the installation guide. So bear with me Thanks!

5 8

Re: [Observium] Bug concerning text with special characters
by Aurélien PERRODY 15 Sep '15

15 Sep '15

Pb solved by changing geocoding api (from Mapquest to Google) Thanks for support Aurélien De : observium [mailto:observium-bounces@observium.org] De la part de Tom Laermans Envoyé : mardi 15 septembre 2015 09:59 À : Observium Network Observation System <observium(a)observium.org> Objet : Re: [Observium] ***SPAM*** Re: Bug concerning text with special characters Hi Aurélien, Did you do a reset of the geolocation? Once it's geolocated with the UTF-8 issue, it'll probably stay wrong in the database until we try to geo-locate it again. Tom On 15/09/2015 09:26, Aurélien PERRODY wrote: Hello Mike Thanks but still the same issue. I'm currently running the version 0.15.9.7000 (15th September 2015) Just added 3 screenshots to this mail to show you the problem. Maybe it's a MAPQUEST API related issue? Thanks Best, Aurélien De : observium [mailto:observium-bounces@observium.org] De la part de Mike Stupalov Envoyé : lundi 14 septembre 2015 17:54 À : observium(a)observium.org<mailto:observium@observium.org> Objet : Re: [Observium] Bug concerning text with special characters Hi, On 14.09.15 11:09, Aurélien PERRODY wrote: Hello Observium team, Just found a little bug concerning text with special characters, as attached with this message. It's strange because the text is correctly displayed just below. And the result is all my devices are not in the same group, I cannot do something because the regional settings are automatically filled and managed by Observium, from the name of the town (as I set in the snmp parameters of my devices). Can you check this point ? All UTF-8 related issues should be already fixed since r6839 (Professional). For CE wait next release. Thanks, best Aurélien _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov http://observium.org _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Alerting from eventlog?
by Svensson Fredrik A 15 Sep '15

15 Sep '15

Hi there! Is it possible to create an alert from the evenlog? Log message: 15d 20h 39m FAILOVER<http://jkpobservium01/device/device=1003/tab=port/port=155956/> Interface changed: [ifPhysAddress] '0025b3d7e06e' -> '0025b3d7e128'; [ifLastChange] '2015-04-21 20:47:50' -> '2015-06-02 16:17:43' I want to know if my Cisco ASA:s does an failover. Regards Fredrik

4 6

Bug concerning text with special characters
by Aurélien PERRODY 15 Sep '15

15 Sep '15

Hello Observium team, Just found a little bug concerning text with special characters, as attached with this message. It's strange because the text is correctly displayed just below. And the result is all my devices are not in the same group, I cannot do something because the regional settings are automatically filled and managed by Observium, from the name of the town (as I set in the snmp parameters of my devices). Can you check this point ? Thanks, best Aurélien

4 5

Interface alerts
by Jeffrey d'Ambly 15 Sep '15

15 Sep '15

I’m using Observium Enterprise, and I have an interface that is running close to 100% traffic that I would like to ignore. This interface is a network tap/span for our IDS device. What can I do in the alert checker to ignore alerts from this interface? —Jeff

2 3

Error Drawing Graph
by Chip Pleasants 14 Sep '15

14 Sep '15

Hi All, I'm seeing "error drawing graph" on several of our Cisco ASR's interfaces, so I'm hoping someone coupe point me in the right direction. I'm running Centos 6.6 with the latest rrdtool rrdtool-1.3.8-7.el6-x86_64 and CE version 0.15.6.6430. I've removed the specific graph rrd file then run the following two commands for debugging purposes. php ./discovery.php -d -h router.local.com php ./poller.php -d -h router.local.com. The file is 0 bytes for some reason. Oddly enough two of the three interfaces issues are with BDI interfaces. The weird part is there is one BDI interface on each box that is displaying correctly. Let me know if you any anything else to assist in troubleshooting. Thanks, Chip Port BDI3004(62) replacing with 64-bit... dot3Duplex, VLAN == TELECOM TRANSIT // CID: // CONTACT: ifInOctets (583452815 B) 2244049.2884615 Bps 260 secs ifOutOctets (34747474 B) 133644.13076923 Bps 260 secs ifInErrors (0 B) 0 Bps 260 secs ifOutErrors (0 B) 0 Bps 260 secs ifInUcastPkts (5021371 B) 19312.965384615 Bps 260 secs ifOutUcastPkts (50407 B) 193.87307692308 Bps 260 secs bps(17.9Mbps/1.07Mbps)bytes(556MB/33.1MB)pkts(19.3kpps/193pps)RRD[%g/usr/bin/rrdtool create /opt/observium/rrd/router.local.com/port-62.rrd \ DS:INOCTETS:DERIVE:600:0:12500000000 \ DS:OUTOCTETS:DERIVE:600:0:12500000000 \ DS:INERRORS:DERIVE:600:0:12500000000 \ DS:OUTERRORS:DERIVE:600:0:12500000000 \ DS:INUCASTPKTS:DERIVE:600:0:12500000000 \ DS:OUTUCASTPKTS:DERIVE:600:0:12500000000 \ DS:INNUCASTPKTS:DERIVE:600:0:12500000000 \ DS:OUTNUCASTPKTS:DERIVE:600:0:12500000000 \ DS:INDISCARDS:DERIVE:600:0:12500000000 \ DS:OUTDISCARDS:DERIVE:600:0:12500000000 \ DS:INUNKNOWNPROTOS:DERIVE:600:0:12500000000 \ DS:INBROADCASTPKTS:DERIVE:600:0:12500000000 \ DS:OUTBROADCASTPKTS:DERIVE:600:0:12500000000 \ DS:INMULTICASTPKTS:DERIVE:600:0:12500000000 \ DS:OUTMULTICASTPKTS:DERIVE:600:0:12500000000 --step 300 RRA:AVERAGE:0.5:1:2016 RRA:AVERAGE:0.5:6:2976 RRA:AVERAGE:0.5:24:1440 RRA:AVERAGE:0.5:288:1440 RRA:MIN:0.5:6:1440 RRA:MIN:0.5:96:360 RRA:MIN:0.5:288:1440 RRA:MAX:0.5:6:1440 RRA:MAX:0.5:96:360 RRA:MAX:0.5:288:1440 %n] rrd_dontneed: Argument 'rrd_file' is NULL. RRD[cmd[update /opt/observium/rrd/router.local.com/port-62.rrd N:2646180175082:22831627397426:0:0:22904108823:35248380163:0:0:0:0:0:0:0:0:0] stdout[ERROR: mmaping file '/opt/observium/rrd/router.local.com/port-62.rrd': Invalid argument] stderr[]]

2 3

Initial setup on UIbuntu - SQL syntax error when creating the observium DB
by Reuben Sankey 14 Sep '15

14 Sep '15

Hi, Im setting up Observium on ubuntu server 14.04.1 LTS. Using the guide: http://www.observium.org/docs/debian_ubuntu/ All going well until I get to the SQL database bit and have issues: mysql -u root -p <mysql root password> mysql> CREATE DATABASE observium DEFAULT CHARACTER SET utf8 COLLATE utf8_general_ci; mysql> GRANT ALL PRIVILEGES ON observium.* TO 'observium'@'localhost' -> IDENTIFIED BY '<observium db password>'; I assume the <observium db password> is to be replaced with a password? [image: Inline image 1] Thanks and regards, Reuben

4 14

how to create a monitoring to mysql and ms sql on windows machine using observium ?
by noc.rodrigo.araujo＠itmnetworks.com.br 14 Sep '15

14 Sep '15

Hello All, we have one way to monitoring mysql4, mysql5 and mssql server that we have on windows 2003 32bit, 2008R2 64Bit and 2012R2 ? i talking about same type of monitoring that we have observium monitoring mysql5 on Linux machine using unix agent any friend have one tutorial about this ? thanks, Rodrigo Araujo

1 0

Filter syslog messages
by Andre Geißler 14 Sep '15

14 Sep '15

Hi When trying to filter syslog messages by program for Cisco ASA messages (%ASA-2-106017) I get an bad request from apache due to the % sign. The url called ishttp://observium/syslog/program=%25ASA-2-106017/ Regards Andre

1 0

changing device link in alert email from http to https
by Casper Allerslev Jensen 14 Sep '15

14 Sep '15

Hi all, I will be accessing my observium from the outside. Therefore i have installed my wildcard cert and enabled https... my problem is when i recive the alert email from observium for some machine. in the email there is a link under device so that i can easily access the server and see what is wrong. my problem is per default the url starts with http and not https. and so the tunnel is not encrypted. How do i change this behaviour?

2 4

nfsen install
by observium＠istar.net.nz 14 Sep '15

14 Sep '15

Hello Does anyone have some documentation on now to install nfsen so it works alongside Observium? This is probably the best documentation I've found so far. https://blog.bravi.org/?p=1091 Thanks SHANE lE <mailto:shanson@istar.net.nz> shanson(a)istar.net.nz lW <https://istar.net.nz/> istar.net.nz lA PO Box 911507, Victoria St West, Auckland lM +64 21 623 903

2 1

Help! Need assist in getting unsubscribed from observium listserve
by Waldref, George C. 13 Sep '15

13 Sep '15

To Adam Armstrong or whom it may concern: Approx 1 month ago I attempted to unsubscribe using instructions sent to me... Didn't work. Can anyone walk me through the necessary steps? Thanks, George Waldref ________________________________________ From: observium [observium-bounces(a)observium.org] on behalf of Adam Armstrong [adama(a)memetic.org] Sent: Sunday, August 30, 2015 11:39 AM To: observium(a)observium.org Subject: Re: [Observium] Alert Emails Not sending In your postfix setup, you'd somehow told it that dingit.dk was a local domain, and so it was trying to deliver the mail to a local 'it' user, which didn't exist: Aug 30 07:50:04 observium01 postfix/local[7153]: A1BF51205: to=<it(a)dingit.dk<mailto:it@dingit.dk>>, relay=local, delay=0.17, delays=0.08/0.08/0/0.01, dsn=5.1.1, status=bounced (unknown user: "it") Thus the mail was rejected! adam. Sent from Mailbird<http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campai…> On 30/08/2015 19:39:33, Casper Allerslev Jensen <casper(a)dingit.dk> wrote: MUHAHAH ITS WORKING!!! I removed postfix and tried with sendmail which was working... so my conclution is that 1. LAMP in ubuntu installs are not the best way to go.. 2. i'm doing something wrong during postfix install Thanks for all your help guys!! [cid:d5e712e6558ec409463723091cf117f11e800104@zimbra] ________________________________ Fra: "Casper Allerslev Jensen" <casper(a)dingit.dk> Til: "Observium Network Observation System" <observium(a)observium.org> Sendt: søndag, 30. august 2015 08:40:49 Emne: Re: [Observium] Alert Emails Not sending Thanks Adam, Actually i was assuming that was why you didn't see it :) and alerts are working fine now.. could someone confim that this log shows that an alert mail was sent from root(a)dingit.dk to it(a)dingit.dk - im not entirely sure.. Aug 30 07:50:04 observium01 postfix/pickup[6022]: A1BF51205: uid=0 from=<root> Aug 30 07:50:04 observium01 postfix/cleanup[7151]: A1BF51205: message-id=<29c25b81fc676049abdadb6d9829d800(a)observium01.dingit.dk> Aug 30 07:50:04 observium01 postfix/qmgr[1246]: A1BF51205: from=<root(a)dingit.dk>, size=14566, nrcpt=1 (queue active) Aug 30 07:50:04 observium01 postfix/local[7153]: A1BF51205: to=<it(a)dingit.dk>, relay=local, delay=0.17, delays=0.08/0.08/0/0.01, dsn=5.1.1, status=bounced (unknown user: "it") Aug 30 07:50:04 observium01 postfix/cleanup[7151]: C13AB1207: message-id=<20150830055004.C13AB1207(a)observium01.dingit.dk> Aug 30 07:50:04 observium01 postfix/qmgr[1246]: C13AB1207: from=<>, size=16286, nrcpt=1 (queue active) Aug 30 07:50:04 observium01 postfix/bounce[7154]: A1BF51205: sender non-delivery notification: C13AB1207 Aug 30 07:50:04 observium01 postfix/qmgr[1246]: A1BF51205: removed Aug 30 07:50:04 observium01 postfix/local[7153]: C13AB1207: to=<root(a)dingit.dk>, relay=local, delay=0.02, delays=0/0/0/0.01, dsn=2.0.0, status=sent (delivered to mailbox) Aug 30 07:50:04 observium01 postfix/qmgr[1246]: C13AB1207: removed Thanks! [cid:58a3a7d450b0c56745e3745b5dd4a85511dfc634@zimbra] ________________________________ Fra: "Adam Armstrong" <adama(a)memetic.org> Til: "Observium Network Observation System" <observium(a)observium.org> Sendt: lørdag, 29. august 2015 13:26:11 Emne: Re: [Observium] Alert Emails Not sending Hi Casper, Ahh yes! Hard to see on mobile! That alert has an entity type of device, you need to create it as storage. Everything else is OK. Adam. Sent with AquaMail for Android http://www.aqua-mail.com On 29 August 2015 11:49:25 am Casper Allerslev Jensen <casper(a)dingit.dk> wrote: There were a screenshot with the alert in the former mail? Sent from Nine<http://www.9folders.com/> Fra: Adam Armstrong <adama(a)memetic.org> sendt: 29/08/2015 11.01 til: Observium Network Observation System Emne: Re: [Observium] Alert Emails Not sending Please show a screenshot of the alert checker, its probably just a typo somewhere! Adam. Sent with AquaMail for Android http://www.aqua-mail.com On 29 August 2015 8:28:52 am Casper Allerslev Jensen <casper(a)dingit.dk> wrote: ok.. so new install following the guide.. and another problem.. ofcause :) [X][cid:cf723e781043ecec0b787f89a4608876def56037@zimbra] To me this clearly shows that my alert is added to backup01.. my problem is the exceed is set to 50 procent and i know volume1 is at 71%.. so why don't it tricker? _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ________________________________ This message is intended for the sole use of the addressee, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the addressee you are hereby notified that you may not use, copy, disclose, or distribute to anyone the message or any information contained in the message. If you have received this message in error, please immediately advise the sender by reply email and delete this message.

1 0

Tape Libraries in observium
by Steffie Morris 12 Sep '15

12 Sep '15

Hi, has anyone ever tried to add tape libraries in observium? I have an HP MSL6030 and a Dell TL2000 here that i tried to add, but there is no support at all for them yet. I don't know where to start to even try to add some basic information about these devices so i have some reading and catching up to do. But if anyone already has some information, just throw it at me :)

3 2

Juniper stack polling - better but still hurting
by Aaron Finney 12 Sep '15

12 Sep '15

Hello all, Moving forward with our POC, and almost everything is perfect...the one thing that's still nagging us is the long polling times for our Juniper switch stacks. Our newest QFX 5k 96s 2-member stacks are now down under 300 seconds after upping max-requests to 70 (~230 seconds now), but our older EX stacks are still taking longer than the polling interval (~330 seconds) to complete. I realize it's the length of time that the Junipers take to handle the snmpbulkwalk of IfEntry and IfEntryX, but has anyone come up with a workaround to date? Obviously stripping OIDs out of the standard MIBs is not a solution because it could break other devices, but is there a possibility I could create an "IfEntry-lite" version that would be exclusive to the EX platform? Or even a custom poller that uses JunoScript instead of snmp? I'm looking for any reasonable solution, even if it takes some work to implement. Thanks! Aaron -- *Aaron Finney | **Network Engineer* 888 East Walnut Street, 2nd Floor | Pasadena, CA 91101 office: +1 (626) 466-1141 x6035 Watch how we make online advertising simple: http://bit.ly/Ent_vid www.openx.com | follow us on: Twitter <http://www.twitter.com/> Facebook <http://www.facebook.com/> LinkedIn <http://www.linkedin.com/>

2 2

Re: [Observium] observium Digest, Vol 62, Issue 74
by ITogetherNet Kitmana 12 Sep '15

12 Sep '15

Please. Unsubscribe My Email .I'm don't Like. 2015-09-12 2:03 GMT+07:00 <observium-request(a)observium.org>: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: Not able to delete checks/groups (Applegate, Lynda K) > 2. Re: Airfibers (Eduardo Schoedler) > 3. Re: Alerting from eventlog? (Andre Gei?ler) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 11 Sep 2015 14:38:04 +0000 > From: "Applegate, Lynda K" <applegatelk(a)spr.k12.oh.us> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Not able to delete checks/groups > Message-ID: > > <9485FFFB82FA7B42A31C18B29C1276FC7CF51502(a)SCS-EXCH-HUB.scs-district.local> > > Content-Type: text/plain; charset="utf-8" > > Who are you (Observium) and why am I receiving thousands of emails from > you people at Observium..This is my email at Springfield City Schools, OH > ________________________________ > From: observium [observium-bounces(a)observium.org] on behalf of Adam > Armstrong [adama(a)memetic.org] > Sent: Friday, September 04, 2015 4:28 AM > To: Observium Network Observation System > Subject: Re: [Observium] Not able to delete checks/groups > > > Ahh. I added some CSS for checkboxes, but it didn't work properly in my > tests. Perhaps that checkboxes has the class to use the new CSS (which > causes them to be invisible at present!) > > Adam. > > Sent with AquaMail for Android > http://www.aqua-mail.com > > On 4 September 2015 10:25:56 am Erwin Heringa <erwin.heringa(a)sidn.nl> > wrote: > > Hi Adam, > > Just found out what?s wrong? > The checkbox for confirmation is gone. > > I tested it with R6925, and it works just fine. > > Met vriendelijke groet, kind regards, > > Erwin Heringa > Netwerkbeheerder > <https://www.sidn.nl> > <https://www.sidn.nl> > <https://www.sidn.nl> > > > > SIDN | Meander 501 | 6825 MD | Postbus 5022 | 6802 EA | ARNHEM > T +31 (0)26 352 55 00 | +31 (0)6 11608489 > erwin.heringa(a)sidn.nl | www.sidn.nl > > [View Erwin Heringa's profile on LinkedIn]< > https://www.linkedin.com/in/netwerkmanager> > > On 04 Sep 2015, at 09:19, Erwin Heringa <erwin.heringa(a)sidn.nl<mailto: > erwin.heringa(a)sidn.nl>> wrote: > > Hi Adam, > > Many thanks for meeting in Amsterdam last night! > > I just updated to R6949, but the delete function seems to be broken. > When i delete a group or alert check the confirmation box appears, but the > delete button in fact does nothing at all. > The close button works just fine. ;-) > > > <PastedGraphic-1.png> > > > Tested this with firefox and safari to be sure. > > > Met vriendelijke groet, kind regards, > > Erwin Heringa > Netwerkbeheerder > <https://www.sidn.nl/> > <https://www.sidn.nl/> > <PastedGraphic-1.tiff> <https://www.sidn.nl/> > > > > SIDN | Meander 501 | 6825 MD | Postbus 5022 | 6802 EA | ARNHEM > T +31 (0)26 352 55 00 | +31 (0)6 11608489 > erwin.heringa(a)sidn.nl | www.sidn.nl > > [View Erwin Heringa's profile on LinkedIn]< > https://www.linkedin.com/in/netwerkmanager> > _______________________________________________ > observium mailing list > observium(a)observium.org<mailto:observium@observium.org> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > _______________________________________________ > observium mailing list > observium(a)observium.org<mailto:observium%40observium.org> > http:/?/?postman?.?memetic?.?org/?cgi-bin/?mailman/?listinfo/?observium< > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium> > >

1 0

Airfibers
by Eduardo Schoedler 11 Sep '15

11 Sep '15

Hi, In another thread I saw you mentioned about airfibers. How can I monitor them? I have some graphs in our Cacti, using this scripts: http://community.ubnt.com/t5/airFiber/My-airfiber-cacti-template/m-p/674163… http://www.sloneczko.net/blog,airfiber_cacti_monitoring.html Thanks. -- Eduardo Schoedler

2 3

Amsterdam meeting
by Adam Armstrong 11 Sep '15

11 Sep '15

Hi Guys, I'm going to be in Amsterdam next week, so there's the possibility of trying to organize some kind of informal meeting, if there's interest. If anyone is interested and has suggestions for where such a thing could be done, speak now! :) adam.

8 15

Mikrotik RB2011 Serial Number
by chott＠praha1.net 11 Sep '15

11 Sep '15

Hi team, after add Mikrotik RB2011 to Observium, there is field "Serial number" but this number is not Serial but Software ID, number like this 70AB-1XY8 Serial number has format like this 419A01234BC9 can you check this? tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

3 5

Re: [Observium] tplink router
by Adam Armstrong 11 Sep '15

11 Sep '15

The switch we can detect. The router seems to be reporting a bogus sysobjectid. Do the routers support adsl-mib? Adam. Simon Smith wrote: Hi, we like to monitor some of our ADSL routers and Switches these are TP-Link devices, but the observium only picks them up as generic devices!? I’ve created a custom os.inc.php to include a tplink device and icon could you possible put it in the SVN professionally :-) Some info below from an ADSL router if its required: sysDescr -> TD-W8901G sysName -> tp-link sysObjectID -> .1.3.6.1.4.1.1.2.3.4.5 Some Info below from a SWITCH, again if required: sysDescr -> 24-Port Gigabit Smart Switch sysName -> tl-sg2424 sysObjectID -> .1.3.6.1.4.1.11863.1.1.13 Regards Simon _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 7

monitoring specfik memory
by Casper Allerslev Jensen 11 Sep '15

11 Sep '15

quick question: I have a linux box with the follow memorys cached memory memory buffers physical memory shared memory swap space virtual memory my question is this: how do i ONLY monitor physical memory? I suspect its an entity i need to set but i don't know how to find the name of it?

2 1

Send sms
by simonsmith5521＠gmail.com 11 Sep '15

11 Sep '15

Hi I've noticed the alerts folder having new files that include services for messaging and sms Is it possible for you to add in TextLocal SMS API ? http://api.txtlocal.com/docs/sendsms We use them here in the UK and they are really cheap! It would be cool if I can send alerts to customers via sms Regards Simon Sent from my iPhone

2 1

Support for Nortel/Avaya
by AJ Schroeder 09 Sep '15

09 Sep '15

Hello list, Let me get this out of the way; I am not a developer. Anyway, I have the pleasure of supporting a network that has older Nortel and Avaya devices on it. I've added them to observium and as expected they are showing up as generic devices. I browsed through the developer section on how to add new device support and I have followed those steps and have added some very basic support for Nortel switches (OS version and Serial Number) First question - would this extra support be of any interest to the Observium devs? I'd like to add more meaningful information such as CPU/Memory utilization, flash usage, etc. However, that step appears to be a bit more challenging. Second question - is this documented somewhere or do I need to "reverse engineer" this support from the existing scripts? Any help or suggestions are appreciated. Thanks, AJ Schroeder

4 6

unix agent issues
by Robbie Wright 09 Sep '15

09 Sep '15

Trying to get the unix agent setup on a machine with bind to test it out. The scripts for Observium and bind are working on the local machine, but Observium isn't showing the modules. The module is enabled for the device but when trying to telnet from Observium, we're just getting "Connection closed by foreign host." Xinetd is running and listening on the port but isn't responding correctly. There are some typos on the agent installation page on the site (/usr/lib vs /usr/bin) and in the xinetd conf file, but we seem to have those straightened out. Anyone have any tricks up your sleeves for getting the agent to be happy with life? ufw/iptables is off for testing on Ubuntu 14.04 and we're running the subscription edition. Robbie Wright Siuslaw Broadband <https://siuslawbroadband.com> 541-902-5101

3 8

PoE Power warning thresholds?
by Richard Müller 09 Sep '15

09 Sep '15

Hy *, does anybody know how the PoE Thresholds for Warning and Error State are calculated? [cid:image001.jpg@01D0EB21.9C0FE580] I have got (Juniper EX) switches which can Provide up to 740W but the warning limit is set to 37W for some reason. Thanks Richard -- <http://www.teamix.de>[teamix]<http://www.teamix.de> Richard Müller Geschäftsführer teamix GmbH Südwestpark 43 90449 Nürnberg Tel.: +49 911 30999 0 Fax: +49 911 30999 99 mail: rm(a)teamix.de web: http://www.teamix.de blog: http://blog.teamix.de Amtsgericht Nürnberg, HRB 18320 | Geschäftsführer: Oliver Kügow, Richard Müller ***Save the Date: Besuchen Sie uns auf der it-sa Messe in Nürnberg vom 06.10.15 – 08.10.15 auf Stand 12-205***

4 6

Disk stats graphs for Equallogic
by Gerwin Krist 09 Sep '15

09 Sep '15

Howdy, Just added our equallogic boxes to observium and although it detects most of the stuff i'm really missing graphs for disk performance (read/writes and iops). If this is correct? Would it be possible to add such a feature? On https://www.zabbix.org/wiki/Monitoring_Dell_Equallogic_Systems is a template for Zabbix. Maybe it's of use. - Gerwin

1 0

Observium Apache Subversion Module Metadata accessible via HTTP......!
by Chaman Rathee 09 Sep '15

09 Sep '15

Dear Team, We found following vulnerability in our observium tool :- Vulnerability Detection Result :- We found that Everybody can access/read '.svn/entries'. using https://<observium-url/.svn/entries<https://%3cobservium-url/.svn/entries> Details: Apache Subversion Module Metadata Accessible OID:1.3.6.1.4.1.25623.1.0.105099 But we checked at Observium Apache Server and found that we have not Load any module for Subversion. So, Please suggest how to solve this vulnerability and if I delete or move .svn folder Will it impact to my running observium? .... With Best Regards, Chaman Rathee Mob. No. :- 9560055816 [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

6 6

adding a few 100 devices - group associations
by Ross [Eve IT] 09 Sep '15

09 Sep '15

Hi all, I'm looking at adding a few 100 devices to Observium shortly. I don't see any issue adding them, as I can use a filename structured as requested. This is for a few clients of ours, I'd like to trial observium as a customer facing solution. Add a user to view their devices only. Is there a way to script giving a user access to so many devices ? Perhaps to group them. Has anyone done this and found issues with a large number of devices ? Regards, Ross.

2 1

poller.php burns all available CPU in the last community edition
by Mark Martinec 09 Sep '15

09 Sep '15

After upgrading a somewhat outdated version Observium CE 0.13.10.4585 to CE 0.15.6.6430 (under PHP 5.5.28), the poller.php started burning excessive CPU: eight running pollers on an 8-CPU machine started burning 100% of available CPU time instead of a few percents as before. They somehow still managed to get their job done, but just barely so in five minutes, and often missing the time slot. While watching the behaviour for a day and learning PHP profiling along the way, I now have an explanation and a solution. Apology if this has been reported before, couldn't find any such report. The problem is in a function external_exec() in includes/common(.inc).php, which has been rewritten some time between these two versions, now switching to a common loop waiting with a stream_select() on two pipes (stdout and stderr) from a spawned snmp*walk process. The documentation on stream_select helps understanding the issue: http://php.net/manual/en/function.stream-select.php read The streams listed in the read array will be watched to see if characters become available for reading (more precisely, to see if a read will not block - in particular, a stream resource is also ready on end-of-file, in which case an fread() will return a zero length string). So what happens is that when a spawned snmp* command closes its stderr but not yet its stdout, the external_exec() goes in a spin: feof($pipes[1]) is false but stream is not yet ready for reading, however the feof($pipes[2]) is true and hence the stream_select() returns right away and reports $pipes[2] as ready. Then the fread($pipes[2]) is called, returns an empty string (because stderr is at eof), and the whole loop busily goes around, until the time the snmp command happens to terminate. Here is a fix: --- includes/common.inc.php.ori 2015-09-04 20:29:39.561244285 +0200 +++ includes/common.inc.php 2015-09-04 20:30:07.617242602 +0200 @@ -618,9 +618,13 @@ { $start = microtime(TRUE); - //while ($status['running'] !== FALSE) - while (feof($pipes[1]) === FALSE || feof($pipes[2]) === FALSE) + while (TRUE) { + $read = array(); + if (!feof($pipes[1])) { $read[] = $pipes[1]; } + if (!feof($pipes[2])) { $read[] = $pipes[2]; } + if (empty($read)) { break; } + stream_select( - $read = array($pipes[1], $pipes[2]), + $read, $write = NULL, $except = NULL, Regards Mark

8 13

Cisco ASR Zone Based Firewall graphing
by Willie Van Waveren 08 Sep '15

08 Sep '15

Hi Observium team, I recently installed Observium and got it running on a bunch of devices. I am now trying to get it to graph zone based firewall stats on Cisco ASR and also ISR. When I go into settings on the devices and click to enable the firewall graph it seems to enable, but then when I go and look again it is back to disabled. Am I missing anything? I would like to have the following in the firewall graph, how can I edit, or add a new one for all Cisco ZBF. 1.3.6.1.4.1.9.9.491.1.1.1.4.0 "The number of connections which were attempted to be setup but which were declined due to non-availability of required resources. This value is accumulated from the last reboot of the firewall." 1.3.6.1.4.1.9.9.491.1.1.1.5.0 "The number of connections which are in the process of being setup but which have not yet reached the established state in the connection table." 1.3.6.1.4.1.9.9.491.1.1.1.6.0 "The number of connections which are currently active." 1.3.6.1.4.1.9.9.491.1.1.1.11.0 "The averaged number of connections which the firewall establishing per second, averaged over the last 300 seconds." Regards, Willie

2 1

SMS via COM port
by chott＠praha1.net 08 Sep '15

08 Sep '15

Hello team, Is there some way how i can send critical Alert via COM port and connected GSM Gateway? Tomas

6 6

nfsen
by Farshid Abediny 08 Sep '15

08 Sep '15

Hi, in your wiki you have a guide for confighure nfsen with observium, it is no more exist ? or you have new guide? thanks,

1 0

Rancid
by Lyndon Labuschagne 07 Sep '15

07 Sep '15

Hi All I see rancid has a “Latest" tab is there an option to view the previous versions? Also after a slight tweak I have UBNT backups too, just not the Air-fibre as yet there is actually a slight difference in the rancid script for those, and I think all the Ubiquity radios are just associated to AirOS or at least a on the CE release I have for testing purposes Lyndon Labuschagne [cid:image001.jpg@01D0D50C.B78C6660] Ground Floor 76 Kyalami Blvd. Kyalami Office Park T: 010 001 6100 C: 084 888 1017 F: 086 768 3587 E: lyndonl(a)mobiletorque.co.za<mailto:lyndonl@mobiletorque.co.za> W: www.mobiletorque.co.za<http://www.mobiletorque.co.za>

3 3

Availability Graphing
by Lyndon Labuschagne 07 Sep '15

07 Sep '15

Hi all I have looked around but don't see any information around availability graphing. What we are looking for is a graph per device that can show if there have been any communication drops? I suppose alerts based on packetloss will tell us if there have been issues, but it would be nice to retrospectively go back a day or week etc. Sent from my iPhone

4 6

Syslog Integration since revision 6951 not working anymore
by Basile Bluntschli 04 Sep '15

04 Sep '15

Hi Team since version 6951 syslog integration with syslog-ng is not working anymore. Besides I see approx 20% higher CPU usage since then... Reported by Observium ;) Thanks Basile

2 6

Wireless - Ruckus Zone Director
by Basile Bluntschli 04 Sep '15

04 Sep '15

Hi Team we just recently added Ruckus Zone Director at some customer site. The Zone Director gets recognized as a Wireless Controller. However no tab with wireless is present. Should there be already some Ruckus support or is this still in development? Thanks Basile

5 9

A few Questions Regarding Observium
by Lyndon Labuschagne 04 Sep '15

04 Sep '15

Hi All So a few questions around the paid subscription and supported devices etc. In the paid version we have more frequent updates, I assume that some of the issues I see now with supported devices may well be already fixed, I would be interested to hear from any paid subscription users what your experiences are, either on or off list is fine with me. We are really impressed with the support level on the Cisco equipment. Obviously the more useful the MIB files are and the devices support for SNMP the more information is obtainable by Observium. We do however make use of other vendor equipment that is not on the supported list and although the basics of these devices work, more information would / could be available based on the device and the MIB files. We make use of EdgeCore / Accton switches, Alcoma Microwave equipment, and Ubiquiti, First off Ubiquiti support seems spotty, I see the FROGFOOT MIBs seem to be the default and although the UBNT MIBs are in the mibs directory I have not at yet seen a device that seems to use the UBNT MIBs. I would love to see RSSI noise, Capacity etc, obviously dependant on the radio / MIB ability, a few years ago we used Cacti and there was a plugin that did support the radio levels etc for the Stations so it must be possible via SNMP. Unless I am missing something I don't see these graphs. I know that UBNT’s SNMP support have generally been crap to say the least, combine that with some “interesting” hardwarre snmp v1…. Tough Switch and the quasi 5 or 8 port setup that is actually only 2 ports etc etc. Alcoma is a fairly extensively used radio in both the licensed and ISM bands and they do have a fairly comprehensive looking MIB, we would be very interested in having much more detailed graphing and monitoring. EdgeCore These switches also offer a fairly extensive MIB file and support. We would be happy to look at paying for development work to be done to support these hardware platforms if we decide to use Observium. How to we go about requesting development work to be done? Just a side note. We use the new airfibre radios and have noticed that Observium shows the in-band managed IP (management vlan) to show as down, even though this is the IP that Observium gets the SNMP details / polling from, I will check the bugs and see if this has been logged as yet. Thanks Lyndon

2 2

Alerts
by Serghei Golipad 04 Sep '15

04 Sep '15

Hi Guys, We seem to be getting alerts for ignored ports. This seems to happen when port was ignored after an alert check has been created, to fix this we have to delete and re-create alert check each time port needs to be ignored. Any chance this can happen automatically? Cheers Serghei Golipad - CCIE(r) #45033 Network Consultant @ Kelway UK 1 Cyrus Way, Cygnet Park Hampton, Peterborough, PE7 8HP DDI: 0203 069 5165 Mobile: 07469 081 910 Web: www.kelway.com<http://www.kelway.com/> Email: s.golipad(a)kelway.com<mailto:s.golipad@kelway.com> PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. Kelway (UK) Ltd is a Company registered in England and Wales. This email is sent for and on behalf of Kelway Holdings Limited. Kelway Holdings Limited is the UK holding company for Kelway (UK) Limited trading as Kelway. The registered office for Kelway Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than Kelway or the sender of its existence. For more information about Kelway please visit www.kelway.co.uk

2 3

Alerting
by Jason LeBlanc 02 Sep '15

02 Sep '15

Here is my config, yet it is still sending to the SNMP sysContact email address: // Set up a default alerter (email to a single address) $config['alerts']['alerter']['default']['descr'] = "Default Email Alert"; $config['alerts']['alerter']['default']['type'] = "email"; $config['alerts']['alerter']['default']['contacts'] = "jleblanc(a)ctgatlanta.com"; $config['alerts']['alerter']['default']['enable'] = TRUE; $config['alerts']['alerter']['default']['email']['default_only'] = TRUE; $config['alerts']['email']['graphs'] = FALSE; What am I missing? Jason LeBlanc IT Consultant Direct: 678-387-5529 | Cell: 954-461-6492 [CTG-logo-TAG-COLOR] 2030 Powers Ferry Road SE | Suite 130 | Atlanta, GA 30339 Main: 404.352.3000 | Fax: 404.352.2962 | www.ctgatlanta.com

2 4

Re: [Observium] Alerting Emails
by Moerman, Maarten 02 Sep '15

02 Sep '15

Here's my config: // Alert Configuration $config['email']['default'] = "blablabla@blablabla"; ## Default alert recipient $config['email']['default_only'] = FALSE; $config['email']['headers'] = "From: Observium <observium@blablabla> " . "\r\n"; $config['email']['enable'] = TRUE; $config['uptime_warning'] = "84600"; $config['email']['from'] = "blablabla@blablabla"; // Mail from. Default: "OBSERVIUM Network Monitor" <observium@`hostname`> Might wanna try that :) -- Maarten Moerman | Mgr, Network Engineering | eBay Classifieds | +31-655122247 | mmoerman(a)ebay.com From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Jason LeBlanc <jleblanc(a)ctgatlanta.com<mailto:jleblanc@ctgatlanta.com>> Reply-To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Date: Wednesday, September 2, 2015 at 6:11 PM To: "Observium Network Observation System (observium(a)observium.org<mailto:observium@observium.org>)" <observium(a)observium.org<mailto:observium@observium.org>> Subject: [Observium] Alerting Emails Here is my config, yet it is still sending to the SNMP sysContact email address: // Set up a default alerter (email to a single address) $config['alerts']['alerter']['default']['descr'] = "Default Email Alert"; $config['alerts']['alerter']['default']['type'] = "email"; $config['alerts']['alerter']['default']['contacts'] = "jleblanc(a)ctgatlanta.com<mailto:jleblanc@ctgatlanta.com>"; $config['alerts']['alerter']['default']['enable'] = TRUE; $config['alerts']['alerter']['default']['email']['default_only'] = TRUE; $config['alerts']['email']['graphs'] = FALSE; What am I missing? Jason LeBlanc IT Consultant Direct: 678-387-5529 | Cell: 954-461-6492 [CTG-logo-TAG-COLOR] 2030 Powers Ferry Road SE | Suite 130 | Atlanta, GA 30339 Main: 404.352.3000 | Fax: 404.352.2962 | www.ctgatlanta.com

1 0

Alerting Emails
by Jason LeBlanc 02 Sep '15

02 Sep '15

Here is my config, yet it is still sending to the SNMP sysContact email address: // Set up a default alerter (email to a single address) $config['alerts']['alerter']['default']['descr'] = "Default Email Alert"; $config['alerts']['alerter']['default']['type'] = "email"; $config['alerts']['alerter']['default']['contacts'] = "jleblanc(a)ctgatlanta.com<mailto:jleblanc@ctgatlanta.com>"; $config['alerts']['alerter']['default']['enable'] = TRUE; $config['alerts']['alerter']['default']['email']['default_only'] = TRUE; $config['alerts']['email']['graphs'] = FALSE; What am I missing? Jason LeBlanc IT Consultant Direct: 678-387-5529 | Cell: 954-461-6492 [CTG-logo-TAG-COLOR] 2030 Powers Ferry Road SE | Suite 130 | Atlanta, GA 30339 Main: 404.352.3000 | Fax: 404.352.2962 | www.ctgatlanta.com

1 0

Query optimization
by Eduardo Schoedler 02 Sep '15

02 Sep '15

# User@Host: observium[observium] @ localhost [] # Query_time: 0.003876 Lock_time: 0.000048 Rows_sent: 0 Rows_examined: **2836** SET timestamp=1441208020; SELECT `device_id` FROM `ports` WHERE `deleted` = '0' AND `ifPhysAddress` = '001ec9943fdd' LIMIT 1; ALTER TABLE `observium`.`ports` ADD INDEX `ports_ifPhysAddress` USING BTREE(`ifPhysAddress`, `deleted`); OPTIMIZE TABLE `observium`.`ports`; Same query, now using index. ;) Thanks! -- Eduardo Schoedler

1 0

windows servers not showing under servers
by Casper Allerslev Jensen 02 Sep '15

02 Sep '15

Hi all, When i go to Device -> servers I only see my linux servers My windows servers doesn't show.. Only when i remove server option in device type and click search do i see them. Why is that? the windows server has the type=server so i don't get why i don't see it when searching for servers?

1 0

Override IfAlias
by Jarno Tensen 01 Sep '15

01 Sep '15

Hi all, Does anyone know how to override the ‘ifAlias’ setting? Just like the ‘sysLocation’? We have a lot of network devices which are not able to give a port description, what is very annoying cause we have to go physical to a switch to find out which device is behind the port. I know a lot of settings can be configured in config.php, does anyone know a configline to manual setup a portdescription (ifAlias)? Many thanks in advance! Regards, Jarno Met vriendelijke groet, Kind regards, Jarno Tensen Systeem- en Netwerkbeheerder [cid:imagecff646.JPG@12e175e4.45946183] Savannahweg 8 3542 AW Utrecht T 030 - 261 91 96 F 030 - 261 69 77 E Jarno.Tensen(a)A2SP.nl W http://www.a2sp.nl<http://www.a2sp.nl/> [cid:image7c3561.JPG@8d03535a.49a528e9] DISCLAIMER Op deze e-mail is de disclaimer van A2SP van toepassing: http://www.a2sp.nl/disclaimer

4 8

Debian 8
by Andrew Colin 01 Sep '15

01 Sep '15

Hi Guys Will we have any issues if we do an apt-get dist-upgrade to debian 8?

4 7

Multiple CPU
by Cameron Murray 01 Sep '15

01 Sep '15

Guys, I have checked the guides however Not seeing how to configure CPU alerting based on multiple CORE CPU's. We have quite a number of windows virtual machines with 2 - 16+ cores and currently use "processor_usage greater 65" however this is alerting when a single core reaches >65% What is the best way to manage this? Regards, Cameron Murray

3 13

Introduction, polling time questions, other bits
by Aaron Finney 01 Sep '15

01 Sep '15

Hello, We've just started a POC project to determine if Observium is a good fit for our environment, and so far have been very pleased with the feature-richness and general usability of the entire system. In fact, we've discovered several things in our environment that were immediately addressable. Cheers! One thing that's been a head-scratcher for us so far is the length of the polling time for our Juniper switches...anywhere from ~2 mins for a 48 port EX ToR switch, to 8 minutes for a two-member QFX aggregate switch. It's the port polling that's so costly according to the output of the poller script, around 450 seconds on the QFXs. I've tried some basic troubleshooting...disabling MAC accounting, disabling all ports for polling/alerting, etc...but it hasn't helped. Is there something simple I'm missing in the config that's causing it to bog down on the port module? Aside from the time, it's not hurting the QFXs, but our poor EX4500s sometimes spike to 90% CPU during polling. For context, the Observium POC system is located in the same datacenter as the devices we're polling against, and the QFXs are 96 port 5ks, with uplinks to our EX ToR switches. Any ideas/suggestions you have would be much appreciated! Also, I did add support for Baytech PDUs; if there's interest, I'd be happy to provide the code. Aaron

2 3

APC Power aggregate graphs
by Cameron Murray 01 Sep '15

01 Sep '15

Guys, Is there a way to aggregate graphs for Power consumption? We use Billing for Data aggregate however would like to see similar for other fields. Regards, Cameron Murray

1 0

Device shown as down after change of ip address - DNS works.
by ecaroh 31 Aug '15

31 Aug '15

Hello, i had to change the ip address of one server from 192.168.102.21 to 192.168.102.40. After that the server is shown as down. DNS works so far, dns resolution from observium gives me the new address. Im sure it is a small problem, but i have no clue. Do i have to make a rediscover and if so how? THX in advance ecaroh

3 4

Syslog Filter Cisco ASA messages
by Andre Geißler 31 Aug '15

31 Aug '15

Hi When trying to filter syslog messages by program for Cisco ASA messages (%ASA-2-106017) I get an bad request from apache due to the % sign. The url called is http://observium/syslog/program=%25ASA-2-106017/ Regards Andre

1 0

Re: [Observium] Alert Emails Not sending
by Tom Laermans 30 Aug '15

30 Aug '15

I'm no expert on this but maybe because you set default_only to true in the config? On Aug 27, 2015 7:05 AM, Casper Allerslev Jensen <casper(a)dingit.dk> wrote: > > Hi, > > I can confirm that installing postfix and hardcode the reciving mailbox in config.php works. But it doesn't use the contacts im making in the observium gui which seems to be the same issue Cameron has. > > the funny thing is my spam filter blocks the email, well to be expected, but it shows it comming from root@observium even though my config.php says: > > // Set up a default alerter (email to a single address) > $config['email']['default'] = "it(a)dingit.dk"; > $config['email']['from'] = "Observium <observium(a)dingit.dk>"; > $config['email']['default_only'] = TRUE; > > any ideas? > > Also i couldn't find any documentation on how to set up email service in observium. I figured it out from Adams and Cameron conversation on the mail list. > > > ________________________________ > Fra: "Adam Armstrong" <adama(a)memetic.org> > Til: "Observium Network Observation System" <observium(a)observium.org> > Sendt: torsdag, 27. august 2015 01:30:22 > Emne: Re: [Observium] Alert Emails Not sending > > Does the alert log show them as being sent? > > They will only be sent when they first occur, so you'll need to have new ones for any new alerts to be sent. > > Adam. > > Sent with AquaMail for Android > http://www.aqua-mail.com > > On 26 August 2015 11:46:40 pm Cameron Murray <cameron(a)techpath.com.au> wrote: >> >> Adam, >> >> >> >> Thanks yes – When I test with the ./test_mail.php -h bne-b1-lvl4-r1-apc2 I receive the email correctly however none of the alerts come through. >> >> >> >> Regards, >> >> Cameron Murray >> Remote Support Engineer >> >> How am I doing? Please click here to rate my work. >> >> >> >> P 1300 033 300 >> F 07 3809 3999 >> E cameron(a)techpath.com.au >> >> www.techpath.com.au >> >> Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 >> Formerly Betta Computer Services Pty Ltd >> >> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. >> >> From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong >> Sent: Thursday, 27 August 2015 8:41 AM >> To: Observium Network Observation System >> Subject: Re: [Observium] Alert Emails Not sending >> >> >> >> Ahh indeed, that's true. You never actually tell it to use SMTP, even though you set the SMTP options! >> >> In that case, make sure the local mail relay is installed and configured (probably just apt-get install postfix) and check /var/log/mail.log >> >> Adam. >> >> Sent with AquaMail for Android >> http://www.aqua-mail.com >> >> On 26 August 2015 11:28:51 pm Cameron Murray <cameron(a)techpath.com.au> wrote: >>> >>> Thanks Adam, >>> >>> >>> >>> It appears to already be using the php backend to send emails: >>> >>> >>> >>> E-mails ENABLED globally ($config['email']['enable']) >>> >>> E-mails use PHP-builtin MAIL backend ($config['email']['backend']) >>> >>> E-mails send only to default email ($config['email']['default_only']) >>> >>> E-mails use these default recipient(s) ($config['email']['default']): >>> >>> >>> >>> Regards, >>> >>> Cameron Murray >>> >>> >>> From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong >>> Sent: Thursday, 27 August 2015 8:20 AM >>> To: Observium Network Observation System >>> Subject: Re: [Observium] Alert Emails Not sending >>> >>> >>> >>> Remove all of the SMTP configutation and just let php send the mail using the local MTA itself. >>> >>> You'll need to make sure one is installed, but its fairly straightforward with Debian/Ubuntu. >>> >>> Adam. >>> >>> Sent with AquaMail for Android >>> http://www.aqua-mail.com >>> >>> On 26 August 2015 11:18:57 pm Cameron Murray <cameron(a)techpath.com.au> wrote: >>>> >>>> Adam, >>>> >>>> >>>> >>>> Can you recommend a working configuration? >>>> >>>> >>>> >>>> Regards, >>>> >>>> Cameron Murray >>>> >>>> >>>> >>>> From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong >>>> Sent: Thursday, 27 August 2015 8:08 AM >>>> To: Observium Network Observation System >>>> Subject: Re: [Observium] Alert Emails Not sending >>>> >>>> >>>> >>>> Don't use remote SMTP It never works properly. >>>> >>>> Adam. >>>> >>>> Sent with AquaMail for Android >>>> http://www.aqua-mail.com >>>> >>>> On 26 August 2015 10:47:42 pm Cameron Murray <cameron(a)techpath.com.au> wrote: >>>>> >>>>> Guys, >>>>> >>>>> >>>>> >>>>> Only new to Observium and it’s a great product! >>>>> >>>>> >>>>> >>>>> Setting up the email alerts and testing from the cli works perfectly however automated alerts configured via the interface do not send. The alerts trigger in the interface and the contact groups are configured. >>>>> >>>>> >>>>> >>>>> Test Email from cli: >>>>> >>>>> >>>>> >>>>> [root@obs observium]# ./test_mail.php -h bne-b1-lvl4-r1-apc2 >>>>> >>>>> Observium 0.15.8.6920 >>>>> >>>>> Test E-mail Configuration >>>>> >>>>> >>>>> >>>>> ##### Software versions ##### >>>>> >>>>> >>>>> >>>>> o OS Linux 2.6.32-504.23.4.el6.x86_64 [amd64] (CentOS 6.7) >>>>> >>>>> o Apache 2.2.15 >>>>> >>>>> o PHP 5.5.28 >>>>> >>>>> o Python 2.6.6 >>>>> >>>>> o MySQL 5.1.73 (extension: mysqli 5.1.73) >>>>> >>>>> o SNMP NET-SNMP 5.5 >>>>> >>>>> o RRDtool 1.3.8 >>>>> >>>>> >>>>> >>>>> ##### Charset info ##### >>>>> >>>>> >>>>> >>>>> o PHP UTF-8 >>>>> >>>>> o MySQL utf8 >>>>> >>>>> >>>>> >>>>> ##### Timezones info ##### >>>>> >>>>> >>>>> >>>>> o Date Wednesday, 26-Aug-15 21:43:01 UTC >>>>> >>>>> o PHP +10:00 >>>>> >>>>> o MySQL +10:00 >>>>> >>>>> >>>>> >>>>> See mail backend options here: http://www.observium.org/wiki/Configuration_Options#Email_backend_settings >>>>> >>>>> >>>>> >>>>> My Hostname: obs.tech….. >>>>> >>>>> E-mails ENABLED globally ($config['email']['enable']) >>>>> >>>>> E-mails use PHP-builtin MAIL backend ($config['email']['backend']) >>>>> >>>>> E-mails send only to default email ($config['email']['default_only']) >>>>> >>>>> E-mails use these default recipient(s) ($config['email']['default']): >>>>> >>>>> alert-infrastructure@tech...... >>>>> >>>>> E-mails send from ($config['email']['from']): >>>>> >>>>> monitoring@tech...... >>>>> >>>>> E-mails send to recipients based on default recipient from config and/or device sysContact. >>>>> >>>>> Try send test notification for bne-b1-lvl4-r1-apc2 to these email(s): >>>>> >>>>> alert-infrastructure@tech...... >>>>> >>>>> EMAILINGNotification for bne-b1-lvl4-r1-apc2 SENT. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Config.php > Email Config >>>>> >>>>> >>>>> >>>>> // Enable alerter >>>>> >>>>> $config['poller-wrapper']['alerter'] = TRUE; >>>>> >>>>> >>>>> >>>>> $config['billing']['customer_autoadd'] = 0; # Enable Auto-add bill per customer >>>>> >>>>> $config['billing']['circuit_autoadd'] = 0; # Enable Auto-add bill per circuit_id >>>>> >>>>> $config['billing']['bill_autoadd'] = 0; # Enable Auto-add bill per bill_id >>>>> >>>>> >>>>> >>>>> $config['email']['sendmail_path'] = '/usr/sbin/sendmail'; >>>>> >>>>> >>>>> >>>>> $config['alerts']['alerter']['default']['descr'] = "System Alert Change"; >>>>> >>>>> $config['alerts']['alerter']['default']['type'] = "email"; >>>>> >>>>> $config['alerts']['alerter']['default']['contact'] = "monitoring@tech......"; >>>>> >>>>> $config['alerts']['alerter']['default']['enable'] = TRUE; >>>>> >>>>> >>>>> >>>>> $config['email']['default'] = "alert-infrastructure@tech...... "; >>>>> >>>>> $config['alerts']['email']['from'] = "monitoring@tech....."; >>>>> >>>>> $config['email']['default_only'] = TRUE; >>>>> >>>>> >>>>> >>>>> $config['email']['from'] = "monitoring@tech....."; >>>>> >>>>> >>>>> >>>>> $config['email']['smtp_host'] = 'mx01…….; >>>>> >>>>> $config['email']['smtp_port'] = 587; >>>>> >>>>> $config['email']['smtp_timeout'] = 10; >>>>> >>>>> $config['email']['smtp_secure'] = tls; >>>>> >>>>> $config['email']['smtp_auth'] = FALSE; >>>>> >>>>> >>>>> >>>>> Contact List configuration: >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Any pointers are appreciated. >>>>> >>>>> >>>>> >>>>> Regards >>>>> >>>>> >>>>> >>>>> Cameron >>>>> >>>>> _______________________________________________ >>>>> observium mailing list >>>>> observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 48

SYSLOG Issues
by Sandy Millar 30 Aug '15

30 Aug '15

All I am having two issues with syslog, and wonder if someone could give me some guidance. Firstly, syslog filters seems a little inconsistent, for example:- This works - $config['syslog']['filter'][] = 'Cannot statfs /run/user/1000/gvfs'; This doesn’t - $config['syslog']['filter'][] = 'PERMISSION'; Unfortunately, the custom filters I need don’t work, any thoughts? And secondly, Observium appears to randomly stop reporting syslog records from clients. I have followed some of the suggestions from the mail list and determined that the missing records do appear in the debug.log but not in the console, and I am at a loss where else to look. I am using Syslog-NG, which to the best of my knowledge is correctly configured, and Observium CE 0.15.6430. Thanks in advance Kind regards Sandy Millar

1 0

Groups based on VLANs
by Anders Johansson 30 Aug '15

30 Aug '15

Hi, I want to track a patricidal VLAN and their ports on a bunch of switches, tough that the Group function in Observium could do that for me :) However I can't find any reference to VLAN, tried to use "ifVlan" but not sure that works, or I didn't do that part correctly. The purpose is to track an internet facing vlan to easy see port graphs and to be able to create alerts from these. //Anders

1 0

Reset Login Password
by Stephen Bateman 30 Aug '15

30 Aug '15

Hello All, Can someone point me in the right direction, on how to reset the login passwords for Observium. For some reason I can't login this morning and the password I thought I was using just does not work so I need to reset via MySQL I assume. Thanks in advance for helping. Stephen

2 1

How to use Simple Observium API
by Mike Driscoll 28 Aug '15

28 Aug '15

I would like to use the Simple API to pull out a simple list of all host names matching a particular naming convention. Does anyone know of any examples or documentation I can refer to to create a small script to do something like this? Mike

1 0

UBNT Tough Switch
by chott＠praha1.net 27 Aug '15

27 Aug '15

Hello team, is there support for Ubiquiti Tough Switch ? Switch has 5-8gig ports by default Observium shows only port :lo, eth0, eth1, br0 i can get access to switch Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

3 2

Seems to be an error in Schema update 228 -> 229
by Richard Müller 27 Aug '15

27 Aug '15

Hy *, I just got an error in the DB Upgrade from 228 - > 229: -- Updating database/file schema 228 -> 229 ... (db) done (1 errors). 229 -> 230 ... (db) done. -- Done. But it looks like it is harmless – Adam? [2015/08/27 07:54:36 +0200] discovery.php(19733): ====== Schema update 228 -> 229 ============== [2015/08/27 07:54:36 +0200] discovery.php(19733): Query: ALTER TABLE `alert_table-state` ADD `last_ok` INT NULL AFTER `last_recovered` ; [2015/08/27 07:54:36 +0200] discovery.php(19733): Error: (1060) Duplicate column name 'last_ok' Best wishes. Richard -- <http://www.teamix.de>[teamix]<http://www.teamix.de> Richard Müller Geschäftsführer teamix GmbH Südwestpark 43 90449 Nürnberg Tel.: +49 911 30999 0 Fax: +49 911 30999 99 mail: rm(a)teamix.de web: http://www.teamix.de blog: http://blog.teamix.de Amtsgericht Nürnberg, HRB 18320 | Geschäftsführer: Oliver Kügow, Richard Müller ***Save the Date: Besuchen Sie uns auf der it-sa Messe in Nürnberg vom 06.10.15 – 08.10.15 auf Stand 12-205***

4 4

PoE monitoring?
by chott＠praha1.net 27 Aug '15

27 Aug '15

Hello team, we have lot of switches with PoE ports Cisco IOS and Cisco SB Is there support for poe? I have Enabled PoE in setting but there is no new TAB or info about PoE in switch now i testing Cisco WS-C3750X-48PS-E Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 2

Re: [Observium] Seems to be an error in Schema update 228 -> 229
by Tom Laermans 27 Aug '15

27 Aug '15

This one is indeed harmless. It's a duplicate to try and fix an update that failed for some people I believe. Tom On Aug 27, 2015 7:58 AM, Richard Müller <rm(a)teamix.de> wrote: > > Hy *, > > > > I just got an error in the DB Upgrade from 228 - > 229: > > > > -- Updating database/file schema > > 228 -> 229 ... (db) done (1 errors). > > 229 -> 230 ... (db) done. > > -- Done. > > > > But it looks like it is harmless – Adam? > > [2015/08/27 07:54:36 +0200] discovery.php(19733): ====== Schema update 228 -> 229 ============== > > [2015/08/27 07:54:36 +0200] discovery.php(19733): Query: ALTER TABLE `alert_table-state` ADD `last_ok` INT NULL AFTER `last_recovered` ; > > [2015/08/27 07:54:36 +0200] discovery.php(19733): Error: (1060) Duplicate column name 'last_ok' > > > > Best wishes. > > > > Richard > > -- > Richard Müller > Geschäftsführer > teamix GmbH > Südwestpark 43 > 90449 Nürnberg > Tel.: +49 911 30999 0 > Fax: +49 911 30999 99 > mail: rm(a)teamix.de > web: http://www.teamix.de > blog: http://blog.teamix.de > Amtsgericht Nürnberg, HRB 18320 | Geschäftsführer: Oliver Kügow, Richard Müller > ***Save the Date: Besuchen Sie uns auf der it-sa Messe in Nürnberg vom 06.10.15 – 08.10.15 auf Stand 12-205*** > >

1 0

Alert Emails Not sending
by Cameron Murray 27 Aug '15

27 Aug '15

Guys, Only new to Observium and it's a great product! Setting up the email alerts and testing from the cli works perfectly however automated alerts configured via the interface do not send. The alerts trigger in the interface and the contact groups are configured. Test Email from cli: [root@obs observium]# ./test_mail.php -h bne-b1-lvl4-r1-apc2 Observium 0.15.8.6920 Test E-mail Configuration ##### Software versions ##### o OS Linux 2.6.32-504.23.4.el6.x86_64 [amd64] (CentOS 6.7) o Apache 2.2.15 o PHP 5.5.28 o Python 2.6.6 o MySQL 5.1.73 (extension: mysqli 5.1.73) o SNMP NET-SNMP 5.5 o RRDtool 1.3.8 ##### Charset info ##### o PHP UTF-8 o MySQL utf8 ##### Timezones info ##### o Date Wednesday, 26-Aug-15 21:43:01 UTC o PHP +10:00 o MySQL +10:00 See mail backend options here: http://www.observium.org/wiki/Configuration_Options#Email_backend_settings My Hostname: obs.tech..... E-mails ENABLED globally ($config['email']['enable']) E-mails use PHP-builtin MAIL backend ($config['email']['backend']) E-mails send only to default email ($config['email']['default_only']) E-mails use these default recipient(s) ($config['email']['default']): alert-infrastructure@tech...... E-mails send from ($config['email']['from']): monitoring@tech...... E-mails send to recipients based on default recipient from config and/or device sysContact. Try send test notification for bne-b1-lvl4-r1-apc2 to these email(s): alert-infrastructure@tech...... EMAILINGNotification for bne-b1-lvl4-r1-apc2 SENT. Config.php > Email Config // Enable alerter $config['poller-wrapper']['alerter'] = TRUE; $config['billing']['customer_autoadd'] = 0; # Enable Auto-add bill per customer $config['billing']['circuit_autoadd'] = 0; # Enable Auto-add bill per circuit_id $config['billing']['bill_autoadd'] = 0; # Enable Auto-add bill per bill_id $config['email']['sendmail_path'] = '/usr/sbin/sendmail'; $config['alerts']['alerter']['default']['descr'] = "System Alert Change"; $config['alerts']['alerter']['default']['type'] = "email"; $config['alerts']['alerter']['default']['contact'] = "monitoring@tech......"; $config['alerts']['alerter']['default']['enable'] = TRUE; $config['email']['default'] = "alert-infrastructure@tech...... "; $config['alerts']['email']['from'] = "monitoring@tech....."; $config['email']['default_only'] = TRUE; $config['email']['from'] = "monitoring@tech....."; $config['email']['smtp_host'] = 'mx01.......; $config['email']['smtp_port'] = 587; $config['email']['smtp_timeout'] = 10; $config['email']['smtp_secure'] = tls; $config['email']['smtp_auth'] = FALSE; Contact List configuration: [cid:image001.png@01D0E09C.985E6EF0] Any pointers are appreciated. Regards Cameron

3 10

LDAP Configuration issue on Observium
by Sivaraja,Raja 27 Aug '15

27 Aug '15

Hi All, Kindly help me to configure the LDAP authentication on Observium page. Below are the Config files lines which i have added on config line. still not working. pls check the below codes,correct me if any lines are wrong. ----------------------------------------------- // Authentication Model $config['auth_mechanism'] = "ldap"; // default, other options: ldap, http-auth, please see documentation for config help $config['auth_ldap_binddn'] = "CN=ldap,OU=IT,OU=Service Accounts,OU=Users,OU=AAAAAAA,DC=BBBBBB,DC=com"; $config['auth_ldap_bindpw'] = "xxxxxxxx"; $config['auth_ldap_bindanonymous'] = FALSE; $config['auth_ldap_attr']['uid'] = "uid"; $config['auth_ldap_attr']['uidNumber'] = "uidNumber"; $config['auth_ldap_attr']['cn'] = "cn"; $config['auth_ldap_attr']['dn'] = "dn"; $config['auth_ldap_objectclass'] = "posixAccount"; $config['auth_ldap_version'] = 3; $config['auth_ldap_server'] = "MDC01.xxx.com <http://mdc01.xxx.com/>"; $config['auth_ldap_port'] = 389; $config['auth_ldap_starttls'] = FALSE; $config['auth_ldap_prefix'] = "uid"; $config['auth_ldap_suffix'] = ",DC=BBBBB,DC=com"; $config['auth_ldap_group'] = "OU=IT,OU=AAAAAA,DC=BBBBBB,DC=com"; $config['auth_ldap_groupbase'] = "OU=IT,OU=IF,OU=IS,OU=Standard,OU=Users,OU=AAAA,DC=BBBBB,DC=com"; $config['auth_ldap_groupmembertype'] = "nodn"; $config['auth_ldap_groupmemberattr'] = "memberUid"; unset($config['auth_ldap_groups']); $config['auth_ldap_groups']['CN=ldap,OU=IT,OU=Service Accounts,OU=Users,OU=AAAA,DC=BBBBB,DC=com']['level'] = 10; $config['auth_ldap_groups']['CN=ldap,OU=IT,OU=Service Accounts,OU=Users,OU=AAAA,DC=BBBBB,DC=com']['level'] = 1; ---------------------------------------------- Need to do any other settings on configfile or anyother file on the server. Thanks in advance Thanks! Regards, *Sivaraja*

3 2

Re: [Observium] help creating alerts
by Rudolf Hoehler 26 Aug '15

26 Aug '15

Hi Adam, I found the wiki page to make perfect sense after looking at some examples. I just visited the pages and since the wiki migration - your examples did not pull through - they used to be right at the bottom of the alert creation page? http://www.observium.org/docs/alert_checker/ Alert Checker Exmaples is blank? Regards, Rudolf From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Casper Allerslev Jensen <casper(a)dingit.dk<mailto:casper@dingit.dk>> Reply-To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Date: Wednesday 26 August 2015 at 19:20 To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Subject: Re: [Observium] help creating alerts Thanks for answering Adam. Ok I think i follow you.. But isn't it a little redudant to have Entity? I mean with the alert im trying to make im looking at specifik storage usages. Wouldn't it go without saying the entity im looking at is the disks? my condition is storage_perc and so i don't see the point in also specifying harddisk in the association entity? I have made my alert this way now.. is this correct? will it work? Check condition: storage_perc gt 90 Associations device match: * Associations Entity match: * [cid:2f142fd126995f0abe51494e79dd177a1fdf9d8e@zimbra] ________________________________ Fra: "Adam Armstrong" <adama(a)memetic.org<mailto:adama@memetic.org>> Til: observium(a)observium.org<mailto:observium@observium.org> Sendt: onsdag, 26. august 2015 18:51:19 Emne: Re: [Observium] help creating alerts Hi, The entity match is the same as the device match, but for the entity (port, memory pool, etc), rather than the device. If you want to match all devices, you put * in the device box. If you want to match all ports for a port entity type alert, you put * in the entity box. If you want to only match ethernet ports on a port alert, you put "ifType eq ethernetCsmacd" in the entity box. adam. On 26/08/2015 16:47:34, Casper Allerslev Jensen <casper(a)dingit.dk<mailto:casper@dingit.dk>> wrote: Hi all.. im trying understand how to make different alerts in Observium.. for testing im trying to creat a alert that will hit all device and set the flag if diskspace becomes 90% used. For that i used the storage_perc alert and created the alert like this: Check condition: storage_perc gt 90 Associations device match: os match * Associations Entity match: storage_perc match * Now the example i found in the documentation was here: http://observium.org/docs/alert_checker/ and was for mempool_perc. Now i know my storage exampel doesn't use the same entity match but thats because i don't understand what that is? My logics behind my alert is like this. Check condition see if storage usages reach 90% or more. Association device is to set what devices in observium should be hit by this alert. I set mine to os match wildcard beacuse i want all device to be hit by this alert. Association Entity im not sure i fully understand? Any help would be apriciated... and please .. i rather be taught to fish then be given a fish :) if you know what i mean :) [cid:032bfadfb691db9ba6d7226f2b32b09de5c402ab@zimbra] _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

help creating alerts
by Casper Allerslev Jensen 26 Aug '15

26 Aug '15

Hi all.. im trying understand how to make different alerts in Observium.. for testing im trying to creat a alert that will hit all device and set the flag if diskspace becomes 90% used. For that i used the storage_perc alert and created the alert like this: Check condition: storage_perc gt 90 Associations device match: os match * Associations Entity match: storage_perc match * Now the example i found in the documentation was here: http://observium.org/docs/alert_checker/ and was for mempool_perc. Now i know my storage exampel doesn't use the same entity match but thats because i don't understand what that is? My logics behind my alert is like this. Check condition see if storage usages reach 90% or more. Association device is to set what devices in observium should be hit by this alert. I set mine to os match wildcard beacuse i want all device to be hit by this alert. Association Entity im not sure i fully understand? Any help would be apriciated... and please .. i rather be taught to fish then be given a fish :) if you know what i mean :)

2 5

Empty Chart
by Michael Ponto 26 Aug '15

26 Aug '15

I know I missed something but not sure what. Just did a fresh install of Observium on Ubuntu 14 LS and everything except the charts are working. All devices are reporting processor info, temp, errors, ect. It is just that the charts are empty. Anyone have any suggestions as to where to start looking?

2 4

sending eventlog by email
by Ross [Eve IT] 26 Aug '15

26 Aug '15

Hello, I'm sure this is quite simple, but how do I send the alerts listed in the eventlog straight to email as they are listed. https://<observium-server>/eventlog/ So as they come through, they are send immediately to an email address. Thanks ! Ross.

2 3

Device listing Group vs. Device list
by chott＠praha1.net 24 Aug '15

24 Aug '15

Hello team there is little difference between List in Group and List in Device list like version is nex to device in Device list is under screen attached Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

1 0

Ability export RANCID Config
by chott＠praha1.net 24 Aug '15

24 Aug '15

Hello team, you are planning Export RANCID Config from web GUI to TXT file? Same like export XML data ? Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 2

Re: [Observium] "Monitoring" Linux Softraid State?
by Richard Müller 24 Aug '15

24 Aug '15

Hy Adam, In real live it looks like this if everything is "good": <<<md>>> Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md1 : active raid1 sdb2[1] sda2[0] 59559808 blocks super 1.2 [2/2] [UU] md0 : active raid1 sdb1[1] sda1[0] 1950656 blocks super 1.2 [2/2] [UU] unused devices: <none> Criterions for Yellow Alarm (my opinion): One or more "U" is replaced with "_" or "recovery" is found Criterion for Red Alarm (my opinion): Device is marked as inactive and has "_"s Look at: https://raid.wiki.kernel.org/index.php/Mdstat Thanks Richard -- Richard Müller | Geschäftsführer teamix GmbH Südwestpark 43 90449 Nürnberg Tel.: +49 911 30999 0 | Fax: +49 911 30999 99 mail: rm(a)teamix.de | web: http://www.teamix.de | blog: http://blog.teamix.de Amtsgericht Nürnberg, HRB 18320 | Geschäftsführer: Oliver Kügow, Richard Müller ***Save the Date: Besuchen Sie uns auf der it-sa Messe in Nürnberg vom 06.10.15 – 08.10.15 auf Stand 12-205*** -----Ursprüngliche Nachricht----- Message: 1 Date: Sun, 23 Aug 2015 12:26:07 +0100 From: "Adam Armstrong" <adama(a)memetic.org> To: "" <observium(a)observium.org> Subject: Re: [Observium] "Monitoring" Linux Softraid State? Message-ID: <ea384ce9-cb37-4664-83e1-95356caeab5e(a)getmailbird.com> Content-Type: text/plain; charset="utf-8" Is all of the required information returned in the md section? It'd probably just take a bit of code to parse the output and inject the required entries into the status system. adam. On 23/08/2015 10:31:37, Richard M?ller <rm(a)teamix.de> wrote: Hy *, ? I just noticed that observium_agent returns a <<<md>>> section: ? 1.)??? Question: is there actual a way of monitoring the state of linux softraid devices in Observium, I just do not know? Documentation / google is quite silent about this question. :-) 2.)??? If no, how can this be implemented? Idea #1: Introduce a ?(red|yellow) Alarm? state even for Unix devices, as most common network devices have. So this technique can be also used for different kinds of alarms (Raid, Network, ECC, ?) a.?????? Yellow Alarm: Raid degraded b.????? Red Alarm: Raid broken :-) ? Idea #2: Is this something, which can be implemented ?outside Observium? (e.g. by some ?geniuos? snmpd-configuration lines in snmpd.conf) and Observium just uses the normal ?(yellow|red) Alarm? way, which is already implemented? Sorry, I am not an SNMP-Expert, so I cannot answer this for myself. ? Thanks Richard --

1 0

alternative to svn update
by Samarasinghe, Sujith 24 Aug '15

24 Aug '15

Hi , I was trying to update to latest version but our firewall does not allow svn as protocol. I downloaded the latest stable version using wget instead and tried to locate new folder under /opt/. I got permission denied error on /discovery.php -u Is there a better way to upgrade than this risky method if SVN is not an option? Thanks, Sujith. Confidentiality Note: This e-mail and any attachments are confidential and may be protected by legal privilege. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation.

1 0

"Monitoring" Linux Softraid State?
by Richard Müller 23 Aug '15

23 Aug '15

Hy *, I just noticed that observium_agent returns a <<<md>>> section: 1.) Question: is there actual a way of monitoring the state of linux softraid devices in Observium, I just do not know? Documentation / google is quite silent about this question. :-) 2.) If no, how can this be implemented? Idea #1: Introduce a “(red|yellow) Alarm” state even for Unix devices, as most common network devices have. So this technique can be also used for different kinds of alarms (Raid, Network, ECC, …) a. Yellow Alarm: Raid degraded b. Red Alarm: Raid broken :-) Idea #2: Is this something, which can be implemented “outside Observium” (e.g. by some “geniuos” snmpd-configuration lines in snmpd.conf) and Observium just uses the normal “(yellow|red) Alarm” way, which is already implemented? Sorry, I am not an SNMP-Expert, so I cannot answer this for myself. Thanks Richard -- <http://www.teamix.de>[teamix]<http://www.teamix.de> Richard Müller Geschäftsführer teamix GmbH Südwestpark 43 90449 Nürnberg Tel.: +49 911 30999 0 Fax: +49 911 30999 99 mail: rm(a)teamix.de web: http://www.teamix.de blog: http://blog.teamix.de Amtsgericht Nürnberg, HRB 18320 | Geschäftsführer: Oliver Kügow, Richard Müller ***Save the Date: Besuchen Sie uns auf der it-sa Messe in Nürnberg vom 06.10.15 – 08.10.15 auf Stand 12-205***

2 1

Ability to Zoom on Graphs?
by Rudolf Hoehler 22 Aug '15

22 Aug '15

Hello Observium team, I would like to know how much effort would it be to add the ability to drag a timeline across a graph which will then automatically adjust the date/time range to that section of the graph? Regards, Rudolf

1 0

DB update error
by Sholom Shapiro 21 Aug '15

21 Aug '15

Hi, I just updated for the first time in a couple of weeks, and got an error applying the updates. Here is the console message and update-errors log: /opt/observium# php ./discovery.php -h none ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 0.15.8.6911 http://www.observium.org -- Updating database/file schema 219 -> 220 ... (db) done. 220 -> 221 ... (db) done. 221 -> 222 ... (db) done. 222 -> 223 ... (db) done. 223 -> 224 ... (db) done (2 errors). 224 -> 225 ... (db) done. 225 -> 226 ... (db) done. 226 -> 227 ... (db) done. 227 -> 228 ... (db) done. -- Done. [2015/08/21 09:48:29 -0700] discovery.php(12283): ====== Schema update 223 -> 224 ============== [2015/08/21 09:48:29 -0700] discovery.php(12283): Query: ALTER TABLE `alert_table-state` ADD `last_ok` INT NULL AFTER `last_recovered` ; [2015/08/21 09:48:29 -0700] discovery.php(12283): Error: (1114) The table '#sql-42b4_3c28dc' is full [2015/08/21 09:48:29 -0700] discovery.php(12283): Query: ALTER TABLE `alert_table-state` CHANGE `last_checked` `last_checked` INT( 10 ) NULL DEFAULT NULL , CHANGE `last_changed` `last_changed` INT( 10 ) NULL DEFAULT NULL , CHANGE `last_recovered` `last_recovered` INT( 10 ) NULL DEFAULT NULL , CHANGE `last_ok` `last_ok` INT( 10 ) NULL DEFAULT NULL , CHANGE `last_failed` `last_failed` INT( 10 ) NULL DEFAULT NULL ; [2015/08/21 09:48:29 -0700] discovery.php(12283): Error: (1054) Unknown column 'last_ok' in 'alert_table-state' Thank You Sholom Shapiro | Senior Systems Engineer Viking Technology Partners sholom(a)vikingtech.consulting 310.948.2438 Viking Technology Partners 10501 W. Gowan Road, Suite 170 Las Vegas, Nevada 89129 vikingtech.consulting <http://www.vikingtech.consulting> @vikingtechs <https://twitter.com/VikingTechs>

2 3

Re: [Observium] Link to device - Feature request
by Tom Laermans 21 Aug '15

21 Aug '15

I've actually come accross quite a few devices that specify configured telnet and http ports and the like in their snmp tree, we could definitely make use of those. So whoever decides to code this up (i'm on vacation this week) please leave room for custom ports in the database ;) Tom On Aug 11, 2015 2:15 PM, Jason Lixfeld <jason(a)lixfeld.ca> wrote: > > You know, I'm actually disgusted with myself for doing that. One of my biggest pet peeves is txt shorthand, in any sort of correspondence. It's lazy and insulting. Yet I just did it myself. > > Sorry Observium. I still love you :) > > Sent from my iPhone > > On Aug 11, 2015, at 8:02 AM, Adam Armstrong <adama(a)memetic.org> wrote: > >> Also, I think we might officially rename Observium to O, since its much easier to type :D >> >> Adam. >> >> Sent with AquaMail for Android >> http://www.aqua-mail.com >> >> On 11 August 2015 12:33:41 pm Jason Lixfeld <jason(a)lixfeld.ca> wrote: >>> >>> I agree, less is more, but how would O determine what to use on devices that were routers or switches or something that had WebUI and/or telnet and/or ssh CLI, where either one was user configurable? >>> >>> Perhaps a configurable default; an array that you could specify OS' and/or host names? Ya, fuck me too. That's getting complicated :) >>> >>> I guess as long as there is room for it in the database, it'd be trivial to run a post-discovery script to add whatever URL was appropriate if you wanted to overwrite whatever O thought was an acceptable default. >>> >>> /finding my rock again... :) >>> >>> Sent from my iPhone >>> >>> On Aug 11, 2015, at 7:11 AM, Adam Armstrong <adama(a)memetic.org> wrote: >>> >>>> I'd prefer if they were only shown on devices wo which they applied, so I think I'd make them an OS type attribute, so you'd only show rdp on windows, etc. >>>> >>>> Adam. >>>> >>>> Sent with AquaMail for Android >>>> http://www.aqua-mail.com >>>> >>>> On 11 August 2015 12:04:37 pm Attila Nagy <tylla_at_memetic.org(a)tylla.hu> wrote: >>>>> >>>>> The solution below is a really constrained (only on Windows, only IE, only with putty and only putty put on the root of the C: drive). >>>>> >>>>> I would think a simple ssh://host.domain.name link would suffice. >>>>> >>>>> And if possible rdp:// http:// vnc:// and maybe smb:// links should accompany the ssh entry. >>>>> >>>>> And the drop down menu would be perfect, it shouldn't take too much space, but be available. >>>>> >>>>> On 2015-08-11 12:49, chott(a)praha1.net wrote: >>>>>> >>>>>> Some idea from my colleague >>>>>> >>>>>> >>>>>> <html> >>>>>> <head> >>>>>> <script type="text/javascript"> >>>>>> function runProgram() >>>>>> { >>>>>> var shell = new ActiveXObject("WScript.Shell"); >>>>>> shell.Run("\"C:\\putty.exe\" 176.101.147.218"); >>>>>> } >>>>>> </script> >>>>>> </head> >>>>>> >>>>>> <body> >>>>>> <a href="javascript:runProgram()">Run program</a> >>>>>> </body> >>>>>> </html> >>>>>> >>>>>> >>>>>> >>>>>> Tomas Chott >>>>>> technický ředitel >>>>>> >>>>>> chott(a)praha1.net >>>>>> Phone: +420 245 004 005 >>>>>> Mobile: +420 604 930 119 >>>>>> >>>>>> Metropolitní síť Praha 1 z.s.p.o. >>>>>> Jindrisska 18 >>>>>> 110 00 Praha 1 >>>>>> Czech Republic >>>>>> www.praha1.net >>>>>> >>>>>> ________________________________ >>>>>> Od: observium [observium-bounces(a)observium.org] za uživatele chott(a)praha1.net [chott(a)praha1.net] >>>>>> Odesláno: 11. srpna 2015 12:43 >>>>>> Komu: Observium Network Observation System >>>>>> Předmět: Re: [Observium] Link to device - Feature request >>>>>> >>>>>> Yes :-) >>>>>> >>>>>> now we are using Observium for inventory and now i must find specific switch in Observium, copy link or opne NEw Tab and get Config. >>>>>> >>>>>> What about space nex to RAW DATA >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> Tomas Chott >>>>>> technický ředitel >>>>>> >>>>>> chott(a)praha1.net >>>>>> Phone: +420 245 004 005 >>>>>> Mobile: +420 604 930 119 >>>>>> >>>>>> Metropolitní síť Praha 1 z.s.p.o. >>>>>> Jindrisska 18 >>>>>> 110 00 Praha 1 >>>>>> Czech Republic >>>>>> www.praha1.net >>>>>> >>>>>> ________________________________ >>>>>> Od: observium [observium-bounces(a)observium.org] za uživatele Jason Lixfeld [jason(a)lixfeld.ca] >>>>>> Odesláno: 11. srpna 2015 12:39 >>>>>> Komu: Observium Network Observation System >>>>>> Předmět: Re: [Observium] Link to device - Feature request >>>>>> >>>>>> Perfect timing. I was just recently thinking about how convenient it would be to be able to do one-click to connect to a device. >>>>>> >>>>>> :) >>>>>> >>>>>> Sent from my iPhone >>>>>> >>>>>> On Aug 11, 2015, at 6:25 AM, Adam Armstrong <adama(a)memetic.org> wrote: >>>>>> >>>>>>> We have limited space on the device navbar, but we could perhaps put these in a drop-down menu from an icon >>>>>>> >>>>>>>> On 11/08/2015 11:23:47, chott(a)praha1.net <chott(a)praha1.net> wrote: >>>>>>>> >>>>>>>> Hello team, >>>>>>>> >>>>>>>> i have question about create link in observium for open in new tab GUI of device config >>>>>>>> >>>>>>>> for example if iam in Device Overview, create some Icon or Text link to open New Tab for Device GUI configuration HTTP? Or SSH plugin https://addons.mozilla.org/EN-us/firefox/addon/firessh/ >>>>>>>> >>>>>>>> Tom >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Tomas Chott >>>>>>>> technický ředitel >>>>>>>> >>>>>>>> chott(a)praha1.net >>>>>>>> Phone: +420 245 004 005 >>>>>>>> Mobile: +420 604 930 119 >>>>>>>> >>>>>>>> Metropolitní síť Praha 1 z.s.p.o. >>>>>>>> Jindrisska 18 >>>>>>>> 110 00 Praha 1 >>>>>>>> Czech Republic >>>>>>>> www.praha1.net >>>>>>> >>>>>>> _______________________________________________ >>>>>>> observium mailing list >>>>>>> observium(a)observium.org >>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> >>>>>> observium mailing list >>>>>> >>>>>> observium(a)observium.org >>>>>> >>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>> >>>>> >>>>> _______________________________________________ >>>>> observium mailing list >>>>> observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>> >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 4

Sorting by OS
by chott＠praha1.net 21 Aug '15

21 Aug '15

Hello team today i can make list of my Mikrotik device and sort by Version and prepare upgrade but GUI doesnt sort :-) or i means if i set A-Z by OS, observim list device from Oldest to newest,,, Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 3

Wireless Support Cisco WLC
by Basile Bluntschli 21 Aug '15

21 Aug '15

Hi Team a few ages ago there was a poll from Adam about which Wireless System should be supported. Since then I have not seen any progress on Cisco WLC. Is there anything in the works? Would SNMP access help? Thanks Basile

6 8

Show suppressed alerts only
by Andre Geißler 21 Aug '15

21 Aug '15

Hi In Alert Overview it is possible to select Failed Only. Could you add a Supressed Only too? Regards, Andre

2 2

Alert Contact and Observium User Management
by chott＠praha1.net 21 Aug '15

21 Aug '15

Hello team, are you plaining connection Alert to Observium User Management people? My idea is in attached screen lot of people which has access to Observium we can pair with some Alert, now we creating duplicate Contacts Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 2

Billing bi-directional
by Chen Reshef 20 Aug '15

20 Aug '15

Hi, I'm checking the billing module now, and I wondered. Can I configure different commit value for each direction ? (outbound/inbound) Thanks, Chen --------------------------------------------------------------------------------------------------------------- This e-mail message may contain confidential, commercial and privileged information or data that constitute proprietary information of Cellcom Israel Ltd. Any review or distribution by others is strictly prohibited. If you are not the intended recipient you are hereby notified that any use of this information or data by any other person is absolutely prohibited. If you are not the intended recipient, please delete all copies. Thank You. http://www.cellcom.co.il

2 2

Reset interface counters
by David Hulth 20 Aug '15

20 Aug '15

Hi, If I reset the port-counters in a switch, would that throw off Observium port graphs in any way? Thanks -- David Hulth Lab Technician Procera Networks AB

3 4

VB: I broke my Observium when changing in the config, php file and now nothing works
by Simarpal Rooprai 20 Aug '15

20 Aug '15

Skickat: den 19 augusti 2015 15:20 Till: Observium Network Observation System Ämne: I broke my Observium when changing in the config,php file and now nothing works So as the title reads, my observium which was working 2 hours ago does not any more. I cant seem to find what the problem with the config file is so I need some help. Please note im not a PHP guy but a networking guy. When browsing to the site all that is shown is is the config file in txt form. See in attached files. I think I removed something fron the config frontpage but I cant seem to find what.... Also tried googling but did not find anything regarding this. Can someone please help ? Find the PHP.config attached. Thank you Best regards / Med vänlig hälsning Simarpal Rooprai Technical Service Engineer simarpal.rooprai(a)networkservices.se<mailto:simarpal.rooprai@networkservices.se> mobile +46 (0) 723 73 21 20. NETWORK SERVICES NORDEN AB Fosievägen 13, SE-214 31 Malmö, Sweden. Phone +46 (0)8-410 231 17. www.networkservices.se<http://www.networkservices.se/> "ENABLING EVERYDAY COMMUNICATION" [cid:EAE04F13-BA46-427C-A29B-F1425DF22D4F@ideon.se]

2 2

Definition of Device type
by chott＠praha1.net 20 Aug '15

20 Aug '15

Hi team, what is definition for Device type? For example now i adding NanoBeam and NanoBridge to Observium and Device type is Network, but for me ...NanoBeam is Wirelless Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

4 9

force rediscover vanished
by Simon Smith 20 Aug '15

20 Aug '15

Hi All, I have just noticed, the new options on the Machines page (the settings cog) with sub options, wonderful idea! however the force rediscover of a machine button has vanished !? any idea where its gone? Simon

2 2

Problem alert
by chott＠praha1.net 20 Aug '15

20 Aug '15

Hello everybody, i dont know where i have problem but, i have set Alert for down of One port in switch everytime i receive only RECOVERY email On the web Observium status is ALERT_NOTIFY, but i receive email only when status is RECOVER_NOTIFY This problem i have for Port down, Alert is associated with two Contacts, one is Gmail second is some Domain. Can i check some debug mode? Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

5 16

Hostname - future request
by chott＠praha1.net 19 Aug '15

19 Aug '15

Hello team, is possible add "Hostname" to Overview tab? Like Hardware, OS, Serial and Hostname? for example in Unifi AP we are using Hostname for floor definition etc.... Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 4

get_port_by_index_cache()
by Marco Spicuglia 19 Aug '15

19 Aug '15

Hi there, any ideas about the following error message I got during discovery? "Invalid arguments passed into function get_port_by_index_cache(). Please report to developers." Regards, Marco

2 1

transit ports
by Samarasinghe, Sujith 19 Aug '15

19 Aug '15

Hi, Could anyone can explain how to make the transit links and make a dashboard with transit links utilization that we can pass over to read-only users group? Thanks, Sujith. Confidentiality Note: This e-mail and any attachments are confidential and may be protected by legal privilege. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation.

2 4

Re: [Observium] 'Duplicate entry' issues on vlans_fdb
by Tom Laermans 18 Aug '15

18 Aug '15

If you're running multiple simultaneous pollers against the same device is not unthinkable they'll all be trying to insert the same data into the table... Tom On Aug 12, 2015 8:02 AM, Aaron Mayfield <amayfield(a)artisaninfrastructure.com> wrote: > > Here is the requested output. I had to kill all the other poller processes running on the system to get it to run (they were hosing the CPU). Oddly enough, once I killed all the other processes, I didn’t any problems running it (back to being fast). Also don’t seem to be getting the errors in the db.log when running the poller ‘one-at-a-time’. > > > > > > > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong > Sent: Tuesday, August 11, 2015 11:52 PM > To: observium(a)observium.org > Subject: Re: [Observium] 'Duplicate entry' issues on vlans_fdb > > > > Hi Aaron, > > > > These seem to be gone from my db.log. Could you send me a ./poller.php -h 54 -m fdb-table -d ? > > > > Thanks, > > adam. >> >> On 12/08/2015 05:01:53, Aaron Mayfield <amayfield(a)artisaninfrastructure.com> wrote: >> >> Just today I updated to the latest and greatest (0.15.8.6882). I was several revisions behind and several database updates were done as a result. After the update, I noticed my poller.php processes started taking all the CPU, started getting gaps in the graphs, etc. I noticed thousands of these entries in db.log: >> >> >> [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2083-6ef88537f91f' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2083','220115','6ef88537f91f','learned') >> [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2084-005056a927c2' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2084','220115','005056a927c2','learned') >> [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2084-a66aaf0bf4cc' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2084','220115','a66aaf0bf4cc','learned') >> [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2085-228a3d193c66' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2085','220115','228a3d193c66','learned') >> [2015/08/11 22:01:02 -0500] poller.php(21342): Failed dbQuery (#1062 - Duplicate entry '54-2086-0ee7c729643b' for key 'dev_vlan_mac'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('54','2086','220115','0ee7c729643b','learned') >> >> If I run a poller process against a switch manually, everything seems to run fine with the exception of the fdb-table module, which is taking over 600 seconds to run. >> >> Here is the schema of my vlans_fdb file: >> >> mysql> show columns from vlans_fdb >> -> ; >> +-------------+-------------+------+-----+---------+-------+ >> | Field | Type | Null | Key | Default | Extra | >> +-------------+-------------+------+-----+---------+-------+ >> | device_id | int(11) | NO | PRI | NULL | | >> | vlan_id | int(11) | NO | PRI | NULL | | >> | port_id | int(11) | YES | MUL | NULL | | >> | mac_address | varchar(32) | NO | PRI | NULL | | >> | fdb_status | varchar(32) | NO | | NULL | | >> +-------------+-------------+------+-----+---------+-------+ >> 5 rows in set (0.00 sec) >> >> mysql> >> mysql> show index from vlans_fdb >> -> ; >> +-----------+------------+--------------+--------------+-------------+-----------+-------------+---- ----+--------+------+------------+---------+ >> | Table | Non_unique | Key_name | Seq_in_index | Column_name | Collation | Cardinality | Sub art | Packed | Null | Index_type | Comment | >> +-----------+------------+--------------+--------------+-------------+-----------+-------------+---- ----+--------+------+------------+---------+ >> | vlans_fdb | 0 | dev_vlan_mac | 1 | device_id | A | 15 | ULL | NULL | | BTREE | | >> | vlans_fdb | 0 | dev_vlan_mac | 2 | vlan_id | A | 18348 | ULL | NULL | | BTREE | | >> | vlans_fdb | 0 | dev_vlan_mac | 3 | mac_address | A | 128440 | ULL | NULL | | BTREE | | >> | vlans_fdb | 1 | device_id | 1 | device_id | A | 78 | ULL | NULL | | BTREE | | >> | vlans_fdb | 1 | port_id | 1 | port_id | A | 431 | ULL | NULL | YES | BTREE | | >> +-----------+------------+--------------+--------------+-------------+-----------+-------------+---- ----+--------+------+------------+---------+ >> 5 rows in set (0.04 sec) >> >> mysql> >> >> Does my table structure look right? I see someone else on the list has had this same issue, but there is no indication that this should be a problem in the latest version. >> >> What should I check? Thanks for any help. >> >> >> >> >> Aaron Mayfield >> Cloud Expert >> Networking Specialist >> >> 12400 Hwy. 71 W. Suite 350-407 >> Austin, TX 78738 >> T. 512.600.4297 >> www.artisaninfrastructure.com >> Partner portal: https://portal.vpdc.us >> Partner support: support(a)artisaninfrastructure.com >> >> >> >> This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. Please note that any views or opinions present in this email are solely those of the author and do not necessarily represent those of the company. Finally the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. (Proprietary & Confidential – Artisan Infrastructure, Inc. et all.) >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. Please note that any views or opinions present in this email are solely those of the author and do not necessarily represent those of the company. Finally the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. (Proprietary & Confidential – Artisan Infrastructure, Inc. et all.)

5 28

SolidFire SSD Storage
by Serghei Golipad 18 Aug '15

18 Aug '15

Guys, Any chance adding support for SolidFire storage? Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. Kelway (UK) Ltd is a Company registered in England and Wales. This email is sent for and on behalf of Kelway Holdings Limited. Kelway Holdings Limited is the UK holding company for Kelway (UK) Limited trading as Kelway. The registered office for Kelway Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than Kelway or the sender of its existence. For more information about Kelway please visit www.kelway.co.uk

1 0

Allerting by port
by chott＠praha1.net 18 Aug '15

18 Aug '15

Hello team, in Cisco IOS switch i have aler for Device match "hostname match sw29" and Entity "ifDescr match FastEthernet4/0/3" I can can set same for Cisco Small business set like this "hostname match lsgsw28" and Entity "ifDescr match gi5" but probably there is another Entity for Cisco Small Business for name of port because Observium after Rebuild Alert does not find Device and port Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 6

Alerts not clearing
by Johnston, Tom 17 Aug '15

17 Aug '15

I’m going to piggy back off the issue of the Alerts not clearing. I’m getting the same issue and I’m pretty sure its SQL config related though I don’t know much past that. For example if I add a new device, I will get alerts for ports in the Admin up / physical down as I’m checking for that with an alert checker. That’s to be expected as I haven’t had a chance to turn off alerting on interfaces I don’t care about yet. Once it polls I turn off polling/alerting on interfaces (such as access ports) So if I go in and turn polling/alerting off on those interfaces I’d assume the alerts would clear. However the alerts persist and keep firing even if I have them turned off on those specific interfaces. I have figured out I can manually clear these alerts by restarting the mysql service. Here is part of the poller run (not sure if you want it all) ##### Completed polling run at 2015-08-17 11:34:51 ##### o Devices Polled 1 o Poller Time 7.877 secs o Memory usage 7.25MB (peak: 7.25MB) o MySQL Usage Cell[3/0.001s] Row[8/0.002s] Rows[52/0.02s] Column[2/0.001s] Update[20/0.014s] Insert[4/0.016s] Delete[0/0s] o RRDTool Usage update[29/0.033s] ——————— Output of my.cnf —————————— I have tweaked some of these in an effort to fix past and this current issue. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp lc-messages-dir = /usr/share/mysql skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 64M #Was 16 max_allowed_packet = 64M #Was 16 thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 32M #Was 1M on 7/2 Tom Changed to test query_cache_size = 32M #Was 16 8/17 # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error log - should be very few entries. # log_error = /var/log/mysql/error.log # # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem tmp_table_size = 2G max_heap_table_size = 2G [mysqldump] quick quote-names max_allowed_packet = 32M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # Tom J On 8/17/15, 9:11 AM, "observium on behalf of observium-request(a)observium.org" <observium-bounces(a)observium.org on behalf of observium-request(a)observium.org> wrote: >Re: Alerts not clearing

2 1

Question Allerting
by chott＠praha1.net 17 Aug '15

17 Aug '15

Hello team we have question from our customer, if i can sending Email with alert for interface down status for specific switch and send to specific email only for one customer for example Cisco sw29, port FastEthernet 4/0/3 i can try set ifOperStatus equal down hostname match sw29 FastEthernet4/0/3 doesnt work Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

3 15

How to add support of new sensors for new (unknow) device
by Denis Zolotarev 17 Aug '15

17 Aug '15

Hello! I am very interested in adding support of new device series to Observium - NetPing (www.netping.ru) - devices for monitoring server rooms and remote power management. Could you please suggest how can I add support of the sensors for unknown (for Observium) devices? I have access to SMNP MIBs of this divices and can read value of any sensors via SNMP. For example I know the OID to read the temperature from one of the sensons: .1.3.6.1.4.1.25728.8800.1.1.2.1 Could you please explain how can I show this temperature on a graph in Observium? Thank you. -- Best Regards, Denis Zolotarev <http://google.com/+DenisZolotarev>

2 2

Hostname in generated graph image
by Simone Montagnani 17 Aug '15

17 Aug '15

Hi all, I've installed latest Observium community from a couple of months and it's working well. I need to use some graphs in other internal websites for monitoring, so I linked them directly using the URL of my observium server in the remote web server page. So, for example one link can appear like this: http://OBSERVIUM_SERVER_IP/graph.php?device=173&type=device_processor&legen… In this "mode" I can see the graph correctly but it's a simple blank page with the graph and legend but without hostname or any reference on it. Do you know is there is an option to add at graph.php to create hostname in the image? Generally: is there a syntax of all the options that we can pass to graph.php to get custom graphs, Regards, Simone

1 0

Alert for Syslog?
by chott＠praha1.net 17 Aug '15

17 Aug '15

Hello Team can i create Alert for Syslog message? Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

3 3

Alerts not clearing
by Robert Williams 17 Aug '15

17 Aug '15

Hi, We seem to have an issue with alerts not clearing (after they are OK) from the Alerts list. Example below shows a checked called “Hardware Fault” which matches Warnings, Alerts and Down status for devices. These items (two output phases) were above a threshold for a period over the weekend, but then went back below it and the event cleared. The device itself shows that the thresholds are OK now but it does list as “Status: Checks Failed” even though the values (and the graph) show it as OK / Green: [cid:image005.jpg@01D0D8D4.84525900] The actual item is here: [cid:image006.jpg@01D0D8D4.84525900] The event in the Main Alerts List is here: [cid:image007.jpg@01D0D8D4.84525900] The Alert Checker configuration is here: [cid:image008.jpg@01D0D8D4.84525900] Sorry for all the images, but it seems the best way to explain this particular issue! This is not the first time this has happened, last week we had 8 items stuck in an alert state, I had to delete the checked and clear the alert table for the so-called “failed” items to make them go away. However, now we have some new alerts they seem to be stuck in the same way. Any ideas? Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

2 1

List of latest alert checkers
by Samarasinghe, Sujith 14 Aug '15

14 Aug '15

Hi , Can you please provide list of sample alert checkers? I tried to add OSPF status but didn't work. It would be handy if you have list of standard alert checkers this seems to be good one. But still missing important stuff http://www.maartenmoerman.nl/?p=612 Thanks, Sujith, Confidentiality Note: This e-mail and any attachments are confidential and may be protected by legal privilege. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation.

5 8

Ubiquiti Unifi AP
by chott＠praha1.net 14 Aug '15

14 Aug '15

Hello team, after add Unifi AP into Observium, system find only -Linux 2.6.22 #1 PREEMPT Mon Jan 19 14:11:12 PST 2015 mips OS = Ubiquiti AirOS [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 9

AUTO: Karsten Schwarz is out of the office (returning 07.09.2015)
by Karsten Schwarz 14 Aug '15

14 Aug '15

I am out of the office until 07.09.2015. In case of Urgent requests please contact other Members of the PSI_Infrastructure team. Emails will be automatically deleted. Note: This is an automated response to your message "Re: [Observium] Better performance on older hardware" sent on 14/08/2015 10:40:41. This is the only notification you will receive while this person is away.

1 0