- observium - lists.observium.org

weird mssql polling issue
by Simon Smith 17 Sep '14

17 Sep '14

Hi All does anyone have an idea why one of our machines is take 182s to do a poll? for some reason its doing a poll for mssql, yet when i look in the config modules its disabled? I’ve attached screenshots showing my issue is the a way i can debug whats going on and why its doing this? i did a manual ./discovery.php -h 43 and that doesn’t seem to show anything about mssql anything else maybe I’m missing? regards Simon

1 0

Alerts and e-mails
by Heironimus, Brian 17 Sep '14

17 Sep '14

Hello I have installed the software about 4 months ago. I have not been able to get the alerts to work at all. I do not have any of the alert pages in the drop down menu. In fact the only alert page that exists is http://192.168.1.31/add_alert_check. http://192.168.1.31/alerts, http://192.168.1.31/alert_checks and http://192.168.1.31/alert_Log just take me back to the homepage. I also do not see any of the alert HTML files under /opt/observium/html/pages except for Add_alert_check. I also have not been able to set it up to e-mail. I just update to 0.14.4.5229 this morning. I was on the May or June release. Thanks for the help, Brian Heironimus

4 4

Re: [Observium] confirm cecaf010d71bb02e45468eb5660a71210fd4f6ad
by Dimitar, GlobeIX 17 Sep '14

17 Sep '14

Hi guys, I just subscribed, I'm reviewing the Demo and wanted to ask: - Does Observium has user/client account login interface, as I was not able to find one? - Does the sub-section "Peering" in "Ports" visualize data collected on a Layer 2 peering switch for example? Best Regards Dimitar On Sep 17, 2014, at 1:46 PM, observium-request(a)observium.org wrote: > Mailing list subscription confirmation notice for mailing list > observium > > We have received a request from 192.168.122.1 for subscription of your > email address, "da(a)globeix.net", to the observium(a)observium.org > mailing list. To confirm that you want to be added to this mailing > list, simply reply to this message, keeping the Subject: header > intact. Or visit this web page: > > http://postman.memetic.org/cgi-bin/mailman/confirm/observium/cecaf010d71bb0… > > > Or include the following line -- and only the following line -- in a > message to observium-request(a)observium.org: > > confirm cecaf010d71bb02e45468eb5660a71210fd4f6ad > > Note that simply sending a `reply' to this message should work from > most mail readers, since that usually leaves the Subject: line in the > right form (additional "Re:" text in the Subject: is okay). > > If you do not wish to be subscribed to this list, please simply > disregard this message. If you think you are being maliciously > subscribed to the list, or have any other questions, send them to > observium-owner(a)observium.org. Dimitar GlobeIX E-Mail: da(a)globeix.net Tel: 1-212-671-0112; Mobile: +1-646-400-1119 Instant Messengers: ICQ: 28348789; MSN: dimitar(a)avramov.com; Skype: (Aeromit) Dimitar Avramov

1 0

Backwards switches
by Ryan McCully 17 Sep '14

17 Sep '14

Hi Everyone My switches are showing inbound traffic as outbound and outbound as inbound on Observium. I suspect it may be something to do with the SNMP in the switches that can't be changed therefore is it possible to swap the two on observium? My router which is also monitored by observium shows inbound and outbound correctly. Thanks Ryan

2 2

Re: [Observium] Problem with the Mail Alerting
by Matt Ladewig 16 Sep '14

16 Sep '14

New feature would be needed- Individual alert checker email address. That way one alert checker could be setup to match on .us.domain devices and send to the US NOC email address. A second checker then would be created to send .jp.domain devices to the JP NOC email address. Feature requests 876 and 988 would take care of it. Matt -----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Tuesday, September 16, 2014 9:30 AM To: Observium Network Observation System Subject: Re: [Observium] Problem with the Mail Alerting On 2014-09-16 17:15, Chip Pleasants wrote: > Is there a way to set an contact/email per device name scheme? So > lets say I want wanted .us.domain.com [2] names to go to the US NOC > and the jp.domain.com [3] names to go to the Japan NOC? Sounds like > you can set a different email per device, but that real hard to manage > if you have a lot devices. I wouldn't even know where to start doing something like that... :D adam. _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Alerts for down state
by Bruce Reeves 16 Sep '14

16 Sep '14

I have been trying a few combinations of the wiki examples for alerts and most work, but a simple down state keeps eluding me in defining an alert. Does anyone have an example they'd could share of it working? Sent while mobile, please excuse typos.

2 2

PHP Vulnerabilities on Ubuntu LTS
by Adam Armstrong 15 Sep '14

15 Sep '14

Hi Guys, Update if you need to : http://securityaffairs.co/wordpress/28294/security/flaws-php5-ubuntu.html i.e., if you're using ubuntu! adam.

1 0

Changing Alert checking frequency
by Darian Jimenez 15 Sep '14

15 Sep '14

I've setup a couple of alerts however I don't see a way to have the alerts email sent out say every 5 minutes or w/e if the alert is triggered. Is there a way to cahnge this? I have a server which triggered an alert and last time alerted is more than 30 minutes ago.

1 0

Monitoring services
by Darian Jimenez 15 Sep '14

15 Sep '14

Is there any way that observium can monitor windows services ? Sent from my iPhone

2 4

postif mailq alerter
by Franjo Posavec 15 Sep '14

15 Sep '14

Hi, what is best way to set alert for postfix mailq? with linux-agent, or via snmp? P.S. Using paid version Best regards, -- Franjo Posavec system administrator entitas d.o.o. T: +385 (0)40 600 002 S: franjo.posavec

2 2

Interface description parser issues
by Chard, Alex (REA-SYD) 14 Sep '14

14 Sep '14

Hi All, Wondering if anyone can help with this... I have Observium setup on about 30 switches and routers. The only feature I haven't been able to get working is the tagging interfaces based on description as Transit, peering etc. As an example, this is one of our Internet transit interfaces: interface GigabitEthernet0/1 description Transit: {14379} (Pipe Networks AS24130) [100Mbit] Observium tells me: Total Graph for ports of type : Transit None found. Any ideas why this might not work? Many thanks, Alex Chard This e-mail is for the use of the intended recipient(s) only. If you have received this e-mail in error, please notify the sender immediately and then delete it. If you are not the intended recipient, you must not use, disclose or distribute this e-mail without the author's permission. We have taken precautions to minimise the risk of transmitting software viruses, but we advise you to carry out your own virus checks on any attachment to this e-mail. We cannot accept liability for any loss or damage caused by software viruses.

2 2

Re: [Observium] f5 bandwidth
by Zhenhui Liang 13 Sep '14

13 Sep '14

>From switch port side which connect to our f5, I can clearly see traffic is at 500M bps. Just from f5 side, it seems not polling correct at all. Thanks. On 9/12/14, 1:11 PM, "Zhenhui Liang" <ZhenhuiLiang(a)eharmony.com> wrote: >Hi, > >We have several f5 load balancers added. But from observium ui, I saw >they report traffic way lower than what f5¹s own guy replies. The >difference is quite huge. >From observium, each interface shows bandwidth usage like less than 1M >bps. >From f5, it shows several hundreds of mega bps. >Although from f5¹s dashboard, it¹s hard to understand, it doesn¹t say >which interface etc, it simply say out, in client side, server side etc. > >Also from observium, it reports each interface as 10Mbps. > >Do we know if F5 is broken? > >Thanks. > > ‹Zhenhui >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

Need assistance adding an application...
by Christopher K. Brown 13 Sep '14

13 Sep '14

Anyone familiar with adding an application? I think I have everything the documentation said to do in place, and I followed the example of a patch (asterix) that added an application, but I cannot get the web GUI to display the new app in the Apps tabs and dropdowns. I have an application that spits out data in the right place...I can telnet to the polling port and the output includes my new data with the proper <<< >>> header. So I'm thinking I may have to add a row to the applications table in the observium database? Is that a necessary step? The php looks like it needs an 'app_id' from somewhere. Thanks for any assistance.

2 1

f5 bandwidth (Zhenhui Liang)
by Austin Spencer 12 Sep '14

12 Sep '14

I can confirm the behavior. It appears to do the same thing for us. Anyone? -Austin

2 2

Re: [Observium] Enterasys Chassis Switches polling\discovery problems
by Austin Spencer 12 Sep '14

12 Sep '14

Hello, how would I disable that module in the config file for only those Switches? It also doesn't seem to be grabbing the port names. All 600+ ports just say "Extreme Networks, Inc. 1000BASE-T RJ45 Gigabit Ethernet Frontpanel Port"

1 0

f5 bandwidth
by Zhenhui Liang 12 Sep '14

12 Sep '14

Hi, We have several f5 load balancers added. But from observium ui, I saw they report traffic way lower than what f5’s own guy replies. The difference is quite huge. >From observium, each interface shows bandwidth usage like less than 1M bps. >From f5, it shows several hundreds of mega bps. Although from f5’s dashboard, it’s hard to understand, it doesn’t say which interface etc, it simply say out, in client side, server side etc. Also from observium, it reports each interface as 10Mbps. Do we know if F5 is broken? Thanks. —Zhenhui

1 0

Re: [Observium] Real time graphs resets much before
by Tom Laermans 12 Sep '14

12 Sep '14

In the pro verson the refresh is actually disabled for realtime graph pages :) Tom Adam Armstrong <adama(a)memetic.org> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Forced unsubscription
by Adam Armstrong 12 Sep '14

12 Sep '14

Hi Guys, If you get force unsubscribed to the list directly after this, it's because your mail server is rejecting emails with "naughty" words in them, so you're flooding other users with bounced messages. Please subscribe from an account which doesn't have draconian nanny email policies. (Because we all know it's impossible to change those policies, we don't even suggest you true, just use another account!) Thanks, adam.

3 2

Re: [Observium] Enterasys Chassis Switches polling\discovery problems (Adam Armstrong)
by Austin Spencer 12 Sep '14

12 Sep '14

Hello Adam, it appears to hang on the following for any of the Chassis Series switches. "Discoverying protocols: LLDP-MIB DEBUG : SMNP Auth options = -v2c -c '<CN>' /usr/bin/snmpbulkwalk -v2c -c '<CN>' -OQUs -m /LLDP-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'<HOSTNAME>':'161' lldpRemoteSystemData

2 1

Problem with the Mail Alerting
by SCHEIN David 12 Sep '14

12 Sep '14

Hello, Since lot of days I tried to configure the email alert in observium but it's impossible to receive some alert emails.... :( you can see there, a part of my config.php // Mailer backend Settings $config['email']['enable'] = TRUE; // Enable/Disable email globally $config['email']['from'] = '"OBSERVIUM Network Monitor" <observium(a)s****.fr>'; // Mail from. Default: "Observium" <observium@`hostname`> $config['email']['default'] = "d*****(a)gmail.com"; // Default alert recipient $config['email']['default_only'] = TRUE; // Only use default recipient (all alerts send to default recipient) $config['email']['backend'] = 'sendmail'; // Mail backend. Allowed: "mail" (PHP's built-in), "sendmail", "smtp". // sendmail backend specific options $config['email']['sendmail_path'] = '/usr/sbin/sendmail'; // The location of the sendmail program. // smtp backend specific options $config['email']['smtp_host'] = 'localhost'; // Outgoing SMTP server name. $config['email']['smtp_port'] = 25; // The port to connect. $config['email']['smtp_timeout'] = 10; // SMTP connection timeout in seconds. $config['email']['smtp_secure'] = NULL; // Enable encryption. Use 'tls' or 'ssl' $config['email']['smtp_auth'] = FALSE; // Whether or not to use SMTP authentication. $config['email']['smtp_username'] = NULL; // SMTP username. $config['email']['smtp_password'] = NULL; // Password for SMTP authentication. // Alerting Settings $config['poller-wrapper']['alerter'] = TRUE; $config['alerts']['bgp']['whitelist'] = NULL; // Populate as an array() with ASNs to alert on. $config['alerts']['port']['ifdown'] = TRUE; // Generate alerts for ports that go down $config['alerts']['port']['ifdown_types'] = array('core', 'transit', 'peering'); // Port bandwidth threshold percentage %age utilisation above this will cause an alert $config['alerts']['port_util_alert'] = FALSE; // Disabled as default //$config['alerts']['port_util_alert'] = TRUE; // Disabled as default $config['alerts']['port_util_perc'] = 85; // %age above which to alert $config['uptime_warning'] = "60"; // Time in seconds to display a "Device Rebooted" Alert. 0 to disable warnings. I tried different config, but nothing is working and with this config when I do a test, I receive the e-mail in my gmail box, but nothing about port down or bgp session down... php ./test_mail.php -d -h sto-rtr-edge-*****.lan CMD[/bin/hostname -f] RUNTIME[0.0302s] OUTPUT[ pu1-webnoc.s****.lan ] Observium v0.14.9.5798 Test E-mail Configuration My Hostname: pu1-webnoc.s****.lan E-mails ENABLED globally E-mails use SENDMAIL backend sendmail path: [/usr/sbin/sendmail] E-mails send only to default email E-mails use these default recipient(s): d*****(a)gmail.com E-mails send from: observium(a)s****.fr SQL[SELECT * FROM `devices` WHERE `hostname` LIKE 'sto-rtr-edge-a****.s****.lan'] Try send test notification for sto-rtr-edge-a****.s****.lan to these email(s): d*****(a)gmail.com SQL[SELECT attrib_value FROM devices_attribs WHERE `device_id` = '35' AND `attrib_type` = 'disable_notify'] SQL[SELECT DISTINCT `contact_method` FROM `alert_contacts` WHERE `contact_disabled` = 0 AND `contact_id` IN (SELECT `alert_contact_id` FROM `alert_contacts_assoc` WHERE `alert_checker_id` = '');] Notification for sto-rtr-edge-a****.s****.lan SENT. And I didn't see anything in /var/log/mail.log, I see only my test. Thanks for your time David

3 4

Enterasys Chassis Switches polling\discovery problems
by Austin Spencer 12 Sep '14

12 Sep '14

Hello all, I've been trying to find out some more information. I'm in the testing run of trying to migrate from Cacti to Observium. Enterasys standalone switches seem to poll data okay (other then memory and CPU) but the Chassis series like the S8 or N7's seem to be giving me a problem. The polling and discovery of these devices appear to hang. Looking at the polling\discovery history from the WebUI just shows 999.99s. Are there any tweaks I can do to get these devices to pull correctly? -Austin

2 1

Class names under CBQoS?
by Chip Pleasants 12 Sep '14

12 Sep '14

Hi all, I don't see class names under the CBQoS section of the interface. I'm running 0.14.9.5798, which I believe is the latest for the commercial version. Is this in the works or should I be able to see them in this version? Thanks, Chip

4 9

Re: [Observium] professional edition and supported distributions?
by Pablo Escobar Lopez 12 Sep '14

12 Sep '14

thanks for your reply. We will go for debian then. best, Pablo. 2014-09-12 10:58 GMT+02:00 Spencer Gaw <spencerg(a)frii.net>: > Debian and Ubuntu are the only supported distributions. CE or Pro > doesn't make a difference. > > Regards, > > SG > > On 9/12/2014 2:28 AM, Pablo Escobar Lopez wrote: > > Hi, > > > > We have been testing observium and now we are considering the > > possibility to upgrade to the professional version. > > > > Is CentOS supported under the professional license or should we stay > > using ubuntu or debian? > > > > thanks for your help. > > Pablo. > > > > > > -- > > Pablo Escobar López > > HPC systems engineer > > Biozentrum, University of Basel > > Swiss Institute of Bioinformatics SIB > > Email: pablo.escobarlopez(a)unibas.ch <mailto:pablo.escobarlopez@unibas.ch > > > > Phone: +41 61 267 15 82 > > http://www.biozentrum.unibas.ch > > > > > > _______________________________________________ > > observium mailing list > > observium(a)observium.org > > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > -- Pablo Escobar López HPC systems engineer Biozentrum, University of Basel Swiss Institute of Bioinformatics SIB Email: pablo.escobarlopez(a)unibas.ch Phone: +41 61 267 15 82 http://www.biozentrum.unibas.ch

1 0

professional edition and supported distributions?
by Pablo Escobar Lopez 12 Sep '14

12 Sep '14

Hi, We have been testing observium and now we are considering the possibility to upgrade to the professional version. Is CentOS supported under the professional license or should we stay using ubuntu or debian? thanks for your help. Pablo. -- Pablo Escobar López HPC systems engineer Biozentrum, University of Basel Swiss Institute of Bioinformatics SIB Email: pablo.escobarlopez(a)unibas.ch Phone: +41 61 267 15 82 http://www.biozentrum.unibas.ch

2 1

keepalived
by Stefan 12 Sep '14

12 Sep '14

1 0

June Changelog
by Adam Armstrong 11 Sep '14

11 Sep '14

Hi Guys, June Changelog! http://www.observium.org/wiki/Changelog#June_2014 Mike was away last month, and it shows. No Rusglish! :D Thanks, adam.

8 37

Manually edit the port name / description
by Anthony Polselli 11 Sep '14

11 Sep '14

We have a Zyxel DSLAM ADSL switch and Observium is polling fine, but it doesn't pull the customer name field. Is there a way (if I can figure out the OID) to add that to the polling or manual set a description for each ADSL port? [cid:image001.jpg@01CFCDA3.30938010] __________________________________________ Anthony Polselli, Chief Technology Officer Natural Networks, Inc. 10225 Barnes Canyon Rd. Suite A105 San Diego, CA 92121 anthony(a)naturalnetworks.com<mailto:anthony@naturalnetworks.com> http://www.naturalnetworks.com<http://www.naturalnetworks.com/> (619) 222-3232 office (858) 202-0301 fax

2 1

Real time graphs resets much before
by Arya, Renuka [BSD] - MED 11 Sep '14

11 Sep '14

Hi Team, I was doing some "real time graphs" for interfaces on one of our switch devices. I ran the tests for 15 seconds of Polling interval. The page says the "graph shows last 3600 (60 mins)" but it seems they get resets in 4-5 mins and restarts itself. Has anyone see anything similar before? Version of Observium : CE 14.4.5229 Thanks! Regards Renuka ________________________________ This email is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged and confidential. If the reader of this email message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is prohibited. If you have received this email in error, please notify the sender and destroy/delete all copies of the transmittal. Thank you.

2 1

Re: [Observium] observium Digest, Vol 50, Issue 45
by Dudu 11 Sep '14

11 Sep '14

Hi All. Thank you for the reply. I do agree that this information is not published via snmp. Maybe it will be the first system to use telnet or ssh and do some text parsing. Its also a lot more reliable. That can be a great thing. Thanks again David. Sent from my Samsung Galaxy smartphone. -------- Original message -------- From: observium-request(a)observium.org Date:11/09/2014 19:32 (GMT+02:00) To: observium(a)observium.org Cc: Subject: observium Digest, Vol 50, Issue 45 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: Maybe I got it Wrong. (Spencer Gaw) 2. Re: Maybe I got it Wrong. (Tristan Rhodes) 3. Re: Maybe I got it Wrong. (Tristan Rhodes) 4. Manually edit the port name / description (Anthony Polselli) ---------------------------------------------------------------------- Message: 1 Date: Thu, 11 Sep 2014 08:18:54 -0600 From: Spencer Gaw <spencerg(a)frii.net> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Maybe I got it Wrong. Message-ID: <5411AF4E.7080506(a)frii.net> Content-Type: text/plain; charset=windows-1252; format=flowed You might want to read up on SNMP and how it operates. Observium does not run commands on any device - it merely reports the data it gathers via SNMP. Regards, SG On 9/11/2014 4:31 AM, Dudu wrote: > Hi All, > I'm new here and I'm not sure about the port view. I can see the > neighbours and computers on the vlan on right side , the command looks > like show ip arp > > Maybe it's better to map the computer to the port itself? sh mac > address-table > > So out of the box we will know which server is connected to which > port. That could help to find VM's as well. > > Many Thanks > David. > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ------------------------------ Message: 2 Date: Thu, 11 Sep 2014 10:06:18 -0600 From: Tristan Rhodes <tristanrhodes(a)weber.edu> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Maybe I got it Wrong. Message-ID: <CALeA1nfH+R-g7JdeQ4UD9nbtv6cN87-1UVDhcxSAveJ4WHC3ZQ(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" David, I think you had the same confusion as me, regarding how to find MAC addresses of nodes (computers). 1) Start by clicking on the name of a device. (You can search for it on the top right) 2) Click on the "Ports" tab. 3) If this is a router, there will be a tab called "ARP/NDP Table", this is IPv4 and IPv6 mapping of MAC address to IP address. If this device was only a layer-2 switch, then this tab would not be displayed. 4) There is a tab called "FDB Table", this is the mapping of MAC address to switchport. (I have always called this the CAM table). Due to the functionality of broadcasts, this will show every device in the same VLAN (the MAC address is seen on switch uplinks) However, I wish there was a node lookup tool that showed which switchport a computer was plugged into. We should be able to identify the interface closest to the computer by removing all interfaces that are CDP/LLDP neighbors with another known network device. Does this make sense? Cheers, Tristan *Tristan Rhodes* Network Engineer Weber State University 801.626.8549 On Thu, Sep 11, 2014 at 8:18 AM, Spencer Gaw <spencerg(a)frii.net> wrote: > You might want to read up on SNMP and how it operates. Observium does not > run commands on any device - it merely reports the data it gathers via SNMP. > > Regards, > > SG > > > On 9/11/2014 4:31 AM, Dudu wrote: > >> Hi All, >> I'm new here and I'm not sure about the port view. I can see the >> neighbours and computers on the vlan on right side , the command looks like >> show ip arp >> >> Maybe it's better to map the computer to the port itself? sh mac >> address-table >> >> So out of the box we will know which server is connected to which port. >> That could help to find VM's as well. >> >> Many Thanks >> David. >> >> >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

2 1

Maybe I got it Wrong.
by Dudu 11 Sep '14

11 Sep '14

Hi All, I'm new here and I'm not sure about the port view. I can see the neighbours and computers on the vlan on right side , the command looks like show ip arp Maybe it's better to map the computer to the port itself? sh mac address-table So out of the box we will know which server is connected to which port. That could help to find VM's as well. Many Thanks David.

3 3

Re: [Observium] how to make observium not to poll certain mibs
by Zhenhui Liang 10 Sep '14

10 Sep '14

I tried that. But seems only a few module are listed there. I think if I disable any of them, a big class of monitors would be disabled with it. I am looking for a way to disable certain mib/objects. Thanks a lot. Would removing/commenting out those objects from the mib file help? On 9/9/14, 2:19 PM, "Pedersen, Sean" <spedersen(a)io.com> wrote: >On the device's page in Observium, there is a small gear icon on the far >right hand side of the screen. Click on that. Then click on the MIBs link >in the Edit bar. You should see a list of MIBs associated with that >device. From there you can disable individual MIBs from being polled. > >-----Original Message----- >From: observium [mailto:observium-bounces@observium.org] On Behalf Of >Zhenhui Liang >Sent: Tuesday, September 09, 2014 2:11 PM >To: Observium Network Observation System >Subject: [Observium] how to make observium not to poll certain mibs > >Hi, Sorry if this has been answered. But I didn't find the answer in >doing search. > >So we have a router bug of memory leak core-dump which was caused by >observium trying to do snmpwalk against a certain mib. Vendor advise us >to upgrade the code to latest, which we can't do without significant >amount of coordination. So I am trying to figure out how to make >observium not to poll it. didn't find from gui. >If I delete the mib definition from the mibs/ sub dir, would that be >enough? > >Thanks a lot. >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > >Founded in 2007, IO is a worldwide leader in software defined data center >technology, services and solutions that enable businesses and governments >to intelligently control their information. > >The communication contained in this e-mail is confidential and is >intended only for the named recipient(s) and may contain information that >is privileged, proprietary, attorney work product or exempt from >disclosure under applicable law. If you have received this message in >error, or are not the named recipient(s), please note that any form of >distribution, copying or use of this communication or the information in >it is strictly prohibited and may be unlawful. Please immediately notify >the sender of the error, and delete this communication including any >attached files from your system. Thank you for your cooperation. >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 4

The ports on the switches doesn't seems to display correct network throughput
by Arya, Renuka [BSD] - MED 10 Sep '14

10 Sep '14

Hi Team, I installed Observium recently. It seems to be working just fine. However, I do see discrepancies in the throughput result. When I run a network performance tool (Nuttcp) on one of the server and monitor the corresponding port on the switch through observium. I observe that the the server is generating around 9.8 Gbps data. If I check the ports directly on the switch I see same thing (~9.8 Gbps) but when I see in through observium on the corresponding port , I see frequent spikes to 12 - 15 Gbps. I am not sure why I am seeing these high value because the NICs on servers are having a 10 G NICs and I never see anything higher than 10 Gbps on server or on the port on the switch. But the real time graphs on Observium shows the spikes of around 12 - 15 Gbps. I would be really glad if you help me on this. I really like the tool but the discrepancy in the throughput result is kind of driving me crazy. Thanks! Regards Renuka ________________________________ This email is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged and confidential. If the reader of this email message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is prohibited. If you have received this email in error, please notify the sender and destroy/delete all copies of the transmittal. Thank you.

4 9

Re: [Observium] Eventlog time and date
by Tomasz Karczewski 10 Sep '14

10 Sep '14

Ok i've changed in php.ini date.timezone value to Europe/Warsaw and now is fine :) Tnx for the advice. Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tomasz Karczewski Sent: Wednesday, September 10, 2014 1:22 PM To: 'Observium Network Observation System' Subject: Re: [Observium] Eventlog time and date SELECT TIMEDIFF(NOW(), UTC_TIMESTAMP); +--------------------------------+ | TIMEDIFF(NOW(), UTC_TIMESTAMP) | +--------------------------------+ | 02:00:00 | +--------------------------------+ 1 row in set (1.18 sec) php -i | grep timezone PHP Warning: Unknown: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in Unknown on line 0 Default timezone => UTC date.timezone => no value => no value date +%::z +02:00:00 Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie From: observium [mailto:observium-bounces@observium.org] On Behalf Of Mike Stupalov Sent: Wednesday, September 10, 2014 1:00 PM To: Observium Network Observation System Subject: Re: [Observium] Eventlog time and date Hi, On 10.09.2014 13:07, Tomasz Karczewski wrote: Hi there, I've got one question. Fresh eventlogs and syslogs have format <https://observium.man.olsztyn.pl/> -1y -1d -2h . How to change it? pls show some info for your server: 1. mysql timezone, from console: $ mysql SELECT TIMEDIFF(NOW(), UTC_TIMESTAMP); 2. php timezone: $ php -i | grep timezone 3. system timezone: $ date +%::z Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov http://observium.org

1 0

Eventlog time and date
by Tomasz Karczewski 10 Sep '14

10 Sep '14

Hi there, I've got one question. Fresh eventlogs and syslogs have format <https://observium.man.olsztyn.pl/> -1y -1d -2h . How to change it? Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

2 4

email alerts
by Zhenhui Liang 10 Sep '14

10 Sep '14

Hi, All I tired many ways to make email working. But seems to be out of luck. >From linux command line, mail prove to be work on either local sendmail/postfix or via external smtp server. Php test email works either way as well. But observium seems not able to generate any alert email. A tcpdump session would not capture any email data as well when my configured alert checker fires off an alert. Seems from config.php, I need to configure $config['alerts']['alerter']['default']['descr'] = "Observium Email Alert"; $config['alerts']['alerter']['default']['type'] = "email"; $config['alerts']['alerter']['default']['contact'] = “zliang(a)xxxx.com"; $config['alerts']['alerter']['default']['enable'] = TRUE; $config['email_from'] = “observium(a)xxxxxx.com"; $config['email_backend'] = "mail"; $config['email_smtp_host'] = 'localhost’; Also tried $config['email']['from'] = “observium(a)xxx.com"; $config['email']['backend'] = "mail"; $config['email']['smtp_host'] = 'localhost'; $config['email']['default_only'] = 'true'; $config['email']['smtp_secure'] = 'false’; And $config['email']['from'] = “observium(a)mydomain.com"; $config['email']['backend'] = “smtp"; $config['email']['smtp_host'] = ’smtp.mydomain.com'; $config['email']['default_only'] = 'true'; $config['email']['smtp_secure'] = 'false’; None of those combination of configs works. It looks like we are deprecate old format of $config['email_from’] to $config[‘email’]['from’] style? With later format, from global settings, I could see my change taking effect. But using the old format, some values got updated, some not. But nevertheless, email were never sent out. Please advise. I am using code version of Observium 0.14.9.5798 Apache 2.2.15 (CentOS) PHP 5.3.3 MySQL 5.1.66 SNMP NET-SNMP version: 5.5 RRDtool 1.3.8

5 13

how to make observium not to poll certain mibs
by Zhenhui Liang 09 Sep '14

09 Sep '14

Hi, Sorry if this has been answered. But I didn’t find the answer in doing search. So we have a router bug of memory leak core-dump which was caused by observium trying to do snmpwalk against a certain mib. Vendor advise us to upgrade the code to latest, which we can’t do without significant amount of coordination. So I am trying to figure out how to make observium not to poll it. didn’t find from gui. If I delete the mib definition from the mibs/ sub dir, would that be enough? Thanks a lot.

2 1

FW: FTOS 9.4 not working properly with Observium whereas 8.3.12.0 for Force10 switches
by Arya, Renuka [BSD] - MED 09 Sep '14

09 Sep '14

Hi Team, I recently installed Obervium I am in process of adding my switch devices to Observium network monitoring tool. It seems that my Force10 S4810 switch with FTOS 8.3.12.0 displays correct graphs whereas the Force10 S4810 switches with FTOS 9.4 doesn't display graphs correctly.It works partially, but doesn't display a lot of other information. The website http://www.observium.org/wiki/Supported_Devices says they have tested FTOS till 8.2.1.2 and I can see it works fine at least till 8.3.12.0. So Iam not sure what should be expected for higher version of FTOS. It works just fine with Arista OS 4.13.6F I'll be really glad if you can look into this. Thanks! Regards Renuka Arya University of Chicago ________________________________ This email is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged and confidential. If the reader of this email message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is prohibited. If you have received this email in error, please notify the sender and destroy/delete all copies of the transmittal. Thank you.

5 12

alert checker based on a specific mib value?
by Zhenhui Liang 09 Sep '14

09 Sep '14

Hi, I am trying the enterprise observium version now for the alert checkers. I understand that we could add checkers based on existing conditions and metics listed on http://www.observium.org/wiki/Alerting_Metrics_and_Attributes But say, if I want to alert on another mib value not listed here, is there currently a way to do so? for instance, I have this mib listed under mibs/PAN-MIB-MODULES panSessionActive OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of active sessions." ::= { panSession 3 } Can I add an alert checker to put condition as panSessionActive gt 100000 ? I tried, but seems not able to. Is there a special way to do so? Thanks a lot. —Zhenhui Liang

2 1

Email Alert setup
by Darian Jimenez 08 Sep '14

08 Sep '14

Hello, I was able to get some alert checks going but email doesn't seem to be working. When I try the test_mail.php script it eventually times out giving me the following. ./test_mail.php -h fwtec.sup.domain.local Sending test notification for fwtec.sup.domain.local...Mailer Error: Failed to connect to myemailserverl.protection.outook.com:25 [SMTP: Failed to connect socket: Connection timed out (code: -1, response: )] done. my config.php has the following for email settings. $config['alerts']['email']['default'] = "xxx@mydomain"; $config['email_from'] = "Observium <observium(a)mydomain.com>"; $config['email_backend'] = "smtp"; $config['email_smtp_host'] = 'mymaildoman.protection.outook.com'; $config['email_smtp_port'] = 25; $config['alerts']['email']['enable'] = TRUE; $config['email_smtp_auth'] = TRUE; $config['email_smtp_username'] = 'xxx@mydomain'; $config['email_smtp_password'] = 'xxxx'; $config['email_smtp_timeout'] = 10; I am able to successfully telnet to my email server on port 25 but can't seem to send. What am i Missing?

3 7

Port errors
by Darian Jimenez 05 Sep '14

05 Sep '14

I just saw I had a warning on port errors and looked at it. It is monitoring a Juniper switch interface. From the legend I can't tell what the "m" stand for for the y axis. would this be resource errors from the switch interface stats? Errors: 275, Drops: 0, Framing errors: 275, Runts: 0, Policed discards: 0, L3 incompletes: 0, L2 channel errors: 0, L2 mismatch timeouts: 0, FIFO errors: 0, Resource errors: 11740453 Thanks, Darian

3 3

Empty graphs
by Joel 05 Sep '14

05 Sep '14

Hi all, just installed Observium CE 0.14.4.5229 on a CentOS 6.5 64bits in VMware Workstation 9 environment : no problem thanks to well done install procedure (http://www.observium.org/wiki/RHEL_Installation); added manually network devices via following commands with no errors : ./add_device.php xxx.xxx.xxx.xxx ./discovery.php -h all ./poller.php -h all crontab updated as stated in install procedure ; Everything seems OK during all these steps ; When looking at the results via web interface, I can see all (CISCO here) devices with all their discovered characteristics (type/model, soft version, interfaces, % RAM, % CPU, thruput figures on interfaces, ...) but no graph is drawn at all (even after 4 hours) ; by the way, the graphs legends are correclty, and the grids too, but no curve drawn; when looking at /opt/observium/rrd directory, I can see a sub-dir created per each disvovered device and inside each of them, 1 RRD file created for each collected variable ; (each device RRD subdir is about 40MB after a while, RRD files inside are not empty) Any idea to investigate more about those empty graphs ? thanks for any help

4 5

wrong post
by Joel Guillerm 05 Sep '14

05 Sep '14

sorry for previous post about netdisco; my mistake

1 0

(no subject)
by Joel Guillerm 05 Sep '14

05 Sep '14

Hello Chris, thanks for your feedback; in the meantime, I had downloaded and tested the netdisco demo VMware appliance and got some problems ; I posted the following mail on the netdisco mailing list but did not get any feedback yet; if you have any ideas, thanks in advance Joel ************************************************* newbie in netdisco, just downloaded and tested netdisco demo VMWare package (V1.0 netdisco version ... a bit too old maybe, even for a test) To run a quick test, 1) I just edited community values and uncomment "discover_only =" statement followed by a comma-separated list of IP routers to be discovered in /usr/local/netdisco/netdisco. conf ; I let "#discover_no =" statement untouched ; 2) then, I restart netdisco via : ./netdisco -p restart ==> OK after a few minutes, I still did not see any IP routers added on the discover_only list shown via web interface; nothing shown in /usr/local/netdisco/data/logs apart from messages related to "netdisco starting" 3) so, I tested the 2 manual commands below via SSH : ./netdisco -d xxx.xxx.xxx.xxx (for 1 single IP) ./netdisco -r xxx.xxx.xxx.xxx,yyy.yyy.yyy. yyy, zzz.zzz.zzz.zzz, .... for my list of IPs routers Both commands work successfully and results are OK via web interface Questions : a) what else should I do to avoid having to issue the manual commands and let netdisco do its job ? b) with recent netdisco versions, is there a function that allows to export resulting infos (such as the Devices List with their discovered ard/soft infos) as a CSV file for example ? thanks for any help *************************************************

1 0

Accounting for electricity
by Simon Schmitz 04 Sep '14

04 Sep '14

Hi, what do you think of an accounting for electricity, the same as the network port on a switch only here of a PDU switch. Simon

3 2

Alerts for Network devices›
by Darian Jimenez 04 Sep '14

04 Sep '14

Hello, I just need basics on alerting if device is down or maybe if VPN interface is down etc. Attached I set an alert to just try and find devices that are currently "up" to see if it discovers them with the names starting as fw*. Once it works I will change to check for devices that are “down” What am I doing wrong here since it isn't finding anything.

3 4

Re: [Observium] Alerts for Network devices›
by Adam Armstrong 04 Sep '14

04 Sep '14

1 0

How to limit Discovery/Polling to infos visible on the main Device panel ?
by Joel Guillerm 03 Sep '14

03 Sep '14

Hello, newbie in Observium ; is it possible to configure Observium to limit its job to get only the informations available on the main Devices panel ? i.e. Device/Location, Platform, Operating System, Uptime/Sysname so, nothing about interfaces, CP, RAM, ... This would be for quick and basic Device inventory purpose only for some environments The idea is to reduce the total discovery/polling time to the minimum for this basic inventory, otherwise, this could last very long time in case of 100's of devices to deal with. thanks for any advice

2 1

Re: [Observium] Google Maps not showing
by Christian Gerbrandt 03 Sep '14

03 Sep '14

I have this in my config: $config['geocoding']['api'] = 'google'; And is working fine. Where can I find information about this config changes? On Sep 01, 2014, at 05:02 PM, Adam Armstrong <adama(a)memetic.org> wrote: On 2014-09-01 16:23, Sebastian Pitei wrote: > Hi everyone, > > First, congrats ot the devs for making such a nice piece of software. > Simple, to the point, perfect! > > Second, my issue: I'm trying to change the maps engine to Google Maps. > I've change the engine to "google" in config.php but unfortunately > nothing is happening. Any ideas? google-mc is the default, and the only one currently expected to work. The old API map was kinda messy, and no one really uses it anymore. adam. _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

Observium Draw errors
by Adriaan Smuts 03 Sep '14

03 Sep '14

Hi Guys, For some reason Observium is giving Draw Errors on all of our graphs. This started happening after the latest svn update. We have this error on our live observium and our staging/testing one. Does anyone know how to fix this? Please see screenshot below: [cid:image001.png@01CFC769.4007A4D0] Regards Adriaan Smuts Systems Administrator - Windows [file:///C:\Users\adriaan\AppData\Roaming\Microsoft\Signatures\WebAfrica_Files\signature_logo.jpg] ________________________________ Direct Line +27 21 464 9565 Reception 086 000 9500 Website www.webafrica.co.za<http://www.webafrica.co.za/>

2 2

Apache 2.4 config (for newer versions of Linux)
by Tristan Rhodes 02 Sep '14

02 Sep '14

I saw in the list archives that someone recently asked about using newer versions of Linux with Observium. I am not an Apache expert, but I got it working by simply changing to "Require all granted" in the recommended Observium config: http://httpd.apache.org/docs/2.4/upgrading.html root@observium:/opt/observium/includes# cat /etc/apache2/sites-available/000-default.conf <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /opt/observium/html <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /opt/observium/html/> Options Indexes FollowSymLinks MultiViews AllowOverride All Require all granted </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined ServerSignature On </VirtualHost> I also had to manually enable the php5-mcrypt module: sudo php5enmod mcrypt sudo service apache2 restart I hope this was helpful! Tristan *Tristan Rhodes* Network Engineer Weber State University 801.626.8549

2 1

Re: [Observium] observium Digest, Vol 50, Issue 5
by matthew waterman 02 Sep '14

02 Sep '14

ok great, I will get a few basic alerters programmed and await an update at some stage with further examples. I will update tommorrow if the alerts have been successful. I like the send recovery toggle - sometimes the little hamster would go ape for up to 20 emails with a missed SNMP down. Glad to send the end of that. Matt On 1 September 2014 20:34, <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: observium Digest, Vol 50, Issue 3 (Tom Laermans) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 01 Sep 2014 10:32:27 +0200 > From: Tom Laermans <tom.laermans(a)powersource.cx> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] observium Digest, Vol 50, Issue 3 > Message-ID: <54042F1B.8060804(a)powersource.cx> > Content-Type: text/plain; charset="windows-1252"; Format="flowed" > > Hi Matt, > > Yes, the legacy alerters have been removed as they did not work very > well. The new alerting system is a lot better. > > I was planning to create example alerts to replicate the old ones, but I > haven't gotten around to that unfortunately. > > For example, device rebooted: > > - Entity type: device > - Alert conditions: device_uptime < 300 > - Entity match: * > - Device match: * > > + Turn off "Send recovery" so you don't get a recovery mail after 5 > minutes. > > Tom > > On 09/01/2014 10:25 AM, matthew waterman wrote: > > hmmm, > > > > I think I am beginning to see the error in my ways perhaps, > > > > I do not have any Alert-checkers..... > > > > I have never had to add them or go near them as the version I was > > originally running just simply emailed me with Device down, device up, > > device rebooted, or if I wanted it to - port down etc > > > > So the new version will not do this by default? Do I need to created > > alert checkers for all my devices? > > > > matt > > > > > > > > On 1 September 2014 19:53, <observium-request(a)observium.org > > <mailto:observium-request@observium.org>> wrote: > > > > Send observium mailing list submissions to > > observium(a)observium.org <mailto:observium@observium.org> > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > or, via email, send a message with subject or body 'help' to > > observium-request(a)observium.org > > <mailto:observium-request@observium.org> > > > > You can reach the person managing the list at > > observium-owner(a)observium.org <mailto:observium-owner@observium.org> > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of observium digest..." > > > > > > Today's Topics: > > > > 1. Re: observium Digest, Vol 50, Issue 1 (Tom Laermans) > > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Mon, 01 Sep 2014 09:52:26 +0200 > > From: Tom Laermans <tom.laermans(a)powersource.cx > > <mailto:tom.laermans@powersource.cx>> > > To: Observium Network Observation System <observium(a)observium.org > > <mailto:observium@observium.org>> > > Subject: Re: [Observium] observium Digest, Vol 50, Issue 1 > > Message-ID: <540425BA.6050808(a)powersource.cx > > <mailto:540425BA.6050808@powersource.cx>> > > Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" > > > > Hi, > > > > Please share your alert checker configuration (screenshot) so we > > can see > > if those are alright, first. > > > > Tom > > > > On 01/09/2014 09:46, matthew waterman wrote: > > > Thanks for your replies, > > > > > > I have un commented the line "$config['poller-wrapper']['alerter'] > > > = TRUE;" , and also confirmed that I have the correct cron job > > > configured. I then gave the VM a reboot as It is one of the devices > > > that I observe. Unfortunalty i did not receive an email alert, so I > > > reboot another device for a full 5 minutes so I should have > > received 1 > > > x email alert for device down and 1 x reboot alert. I did not > > receive > > > either. Is there a way I can monitor/watch the email being sent or > > > processed to confirm that it is indeed happening? > > > > > > Matt > > > > > > > > > On 1 September 2014 11:20, <observium-request(a)observium.org > > <mailto:observium-request@observium.org> > > > <mailto:observium-request@observium.org > > <mailto:observium-request@observium.org>>> wrote: > > > > > > Send observium mailing list submissions to > > > observium(a)observium.org <mailto:observium@observium.org> > > <mailto:observium@observium.org <mailto:observium@observium.org>> > > > > > > To subscribe or unsubscribe via the World Wide Web, visit > > > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > or, via email, send a message with subject or body 'help' to > > > observium-request(a)observium.org > > <mailto:observium-request@observium.org> > > > <mailto:observium-request@observium.org > > <mailto:observium-request@observium.org>> > > > > > > You can reach the person managing the list at > > > observium-owner(a)observium.org > > <mailto:observium-owner@observium.org> > > <mailto:observium-owner@observium.org > > <mailto:observium-owner@observium.org>> > > > > > > When replying, please edit your Subject line so it is more > > specific > > > than "Re: Contents of observium digest..." > > > > > > > > > Today's Topics: > > > > > > 1. Email setup in Config.php (matthew waterman) > > > 2. Re: Email setup in Config.php (Tristan Rhodes) > > > 3. Re: Email setup in Config.php (Nathan Phelan) > > > > > > > > > > > > ---------------------------------------------------------------------- > > > > > > Message: 1 > > > Date: Mon, 1 Sep 2014 08:32:15 +1200 > > > From: matthew waterman <mwaterman1982(a)gmail.com > > <mailto:mwaterman1982@gmail.com> > > > <mailto:mwaterman1982@gmail.com > > <mailto:mwaterman1982@gmail.com>>> > > > To: observium(a)observium.org <mailto:observium@observium.org> > > <mailto:observium@observium.org <mailto:observium@observium.org>> > > > Subject: [Observium] Email setup in Config.php > > > Message-ID: > > > > > > > > <CAMq=ffcjUmV--G_kqRpXMK+ugBQ6OB2eK+6dEsqza4mteHZx4Q(a)mail.gmail.com > > <mailto: > ffcjUmV--G_kqRpXMK%2BugBQ6OB2eK%2B6dEsqza4mteHZx4Q(a)mail.gmail.com> > > <mailto: > ffcjUmV--G_kqRpXMK%2BugBQ6OB2eK%2B6dEsqza4mteHZx4Q(a)mail.gmail.com > > <mailto: > ffcjUmV--G_kqRpXMK%252BugBQ6OB2eK%252B6dEsqza4mteHZx4Q(a)mail.gmail.com>>> > > > Content-Type: text/plain; charset="utf-8" > > > > > > Hi, > > > > > > I have been using Observium for about 1 year successfully and > > > recently, > > > approximately 3mth ago, I subscribed to the paid version, > > upgraded > > > via SVN > > > and copied my config.php. I do not have working email alerts at > > > the moment > > > and would like to know what needs to be changed to get this > > > working again. > > > Below is a print of my config.php file. Please advise me as to > > > what needs > > > to be changed to get email working again. > > > > > > Config.php: > > > > > > <?php > > > > > > ## Have a look in includes/defaults.inc.php for examples of > > > settings you > > > can set here. DO NOT EDIT defaults.inc.php! > > > > > > // Database config > > > $config['db_host'] = "localhost"; > > > $config['db_user'] = "myuesrname"; > > > $config['db_pass'] = "mypassword"; > > > $config['db_name'] = "observium"; > > > > > > // Location > > > $config['install_dir'] = "/opt/observium"; > > > > > > // Thie should *only* be set if you want to *force* a > particular > > > hostname/port > > > // It will prevent the web interface being usable form any > other > > > hostname > > > #$config['base_url'] = "http://observium.company.com"; > > > > > > // Default community list to use when adding/discovering > > > $config['snmp']['community'] = array("public"); > > > > > > // Authentication Model > > > $config['auth_mechanism'] = "mysql"; // default, other > > options: > > > ldap, > > > http-auth, please see documentation for config help > > > > > > // Enable alerter > > > // $config['poller-wrapper']['alerter'] = TRUE; > > > > > > // Set up a default alerter (email to a single address) > > > > > > // SNMP Settings > > > $config['snmp']['timeout'] = 1000; # timeout in ms > > > $config['snmp']['retries'] = 6; # how many times to > > > retry the > > > query > > > > > > //Ping Settings > > > $config['ping']['timeout'] = 2000; # timeout in ms > > > $config['ping']['retries'] = 10; # how many times to > > > retry the > > > query > > > > > > //Alert Settings > > > $config['alerts']['email']['default'] = > > "myemail(a)domain.co.nz <mailto:myemail@domain.co.nz> > > > <mailto:myemail@domain.co.nz <mailto:myemail@domain.co.nz>>"; > > > $config['alerts']['email']['from'] = "observium.dev < > > > myeamil(a)domain.co.nz <mailto:myeamil@domain.co.nz> > > <mailto:myeamil@domain.co.nz <mailto:myeamil@domain.co.nz>>>"; > > > $config['alerts']['email']['default_only'] = TRUE; > > > $config['alerts']['email']['enable'] = FALSE; > > > $config['uptime_warning'] = "14400"; ## Time > to > > > display > > > reboot warning > > > //Poller and Discovery Modules > > > > > > //Syslog settings > > > $config['enable_syslog'] = 1; > > > $config['syslog_filter'] = array("last message repeated", > > > "Connection from > > > UDP: [", > > > "ipSystemStatsTable node > > > ipSystemStatsOutFragOKs not implemented", > > > "diskio.c: don't know how to > > > handle"); ## > > > Ignore some crappy stuff from SNMP daemon > > > > > > //Geocoding Configuration > > > > > > > > > // End config.php > > > > > > > > > > > > *Observium*0.14.8.5763 *Apache*2.2.22 (Ubuntu) > > *PHP*5.3.10-1ubuntu3.13 > > > *MySQL*5.5.38-0ubuntu0.12.04.1 *SNMP*NET-SNMP version: 5.4.3 > > > *RRDtool*1.4.7 > > >

3 3

6500 PSU Voltage Check
by Jake Turner 02 Sep '14

02 Sep '14

Hi All, I was wondering if I could configure alerts for the voltage on a couple of 6500 power supplies (to try and alert on power failures). I've used the Entity Type of Voltage and this picks up the Enitity's from the 6500 (110/220v AC power supply, 2500 watt 2 - Power Supply 2 power-input) however I'm unsure on how to configure the 'Check Conditions' and 'Associations'. The below is a guess for the check conditions: Metric Condition Value sensor_voltage lt 220 In Associations I have simply put * * which I suspect is incorrect. Has anybody else tried setting up checks on voltage? Thanks Jake

2 3

Google Maps not showing
by Sebastian Pitei 01 Sep '14

01 Sep '14

Hi everyone, First, congrats ot the devs for making such a nice piece of software. Simple, to the point, perfect! Second, my issue: I'm trying to change the maps engine to Google Maps. I've change the engine to "google" in config.php but unfortunately nothing is happening. Any ideas? Regards, Sebi

2 1

Re: [Observium] observium Digest, Vol 50, Issue 3
by matthew waterman 01 Sep '14

01 Sep '14

hmmm, I think I am beginning to see the error in my ways perhaps, I do not have any Alert-checkers..... I have never had to add them or go near them as the version I was originally running just simply emailed me with Device down, device up, device rebooted, or if I wanted it to - port down etc So the new version will not do this by default? Do I need to created alert checkers for all my devices? matt On 1 September 2014 19:53, <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: observium Digest, Vol 50, Issue 1 (Tom Laermans) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 01 Sep 2014 09:52:26 +0200 > From: Tom Laermans <tom.laermans(a)powersource.cx> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] observium Digest, Vol 50, Issue 1 > Message-ID: <540425BA.6050808(a)powersource.cx> > Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" > > Hi, > > Please share your alert checker configuration (screenshot) so we can see > if those are alright, first. > > Tom > > On 01/09/2014 09:46, matthew waterman wrote: > > Thanks for your replies, > > > > I have un commented the line "$config['poller-wrapper']['alerter'] > > = TRUE;" , and also confirmed that I have the correct cron job > > configured. I then gave the VM a reboot as It is one of the devices > > that I observe. Unfortunalty i did not receive an email alert, so I > > reboot another device for a full 5 minutes so I should have received 1 > > x email alert for device down and 1 x reboot alert. I did not receive > > either. Is there a way I can monitor/watch the email being sent or > > processed to confirm that it is indeed happening? > > > > Matt > > > > > > On 1 September 2014 11:20, <observium-request(a)observium.org > > <mailto:observium-request@observium.org>> wrote: > > > > Send observium mailing list submissions to > > observium(a)observium.org <mailto:observium@observium.org> > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > or, via email, send a message with subject or body 'help' to > > observium-request(a)observium.org > > <mailto:observium-request@observium.org> > > > > You can reach the person managing the list at > > observium-owner(a)observium.org <mailto:observium-owner@observium.org> > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of observium digest..." > > > > > > Today's Topics: > > > > 1. Email setup in Config.php (matthew waterman) > > 2. Re: Email setup in Config.php (Tristan Rhodes) > > 3. Re: Email setup in Config.php (Nathan Phelan) > > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Mon, 1 Sep 2014 08:32:15 +1200 > > From: matthew waterman <mwaterman1982(a)gmail.com > > <mailto:mwaterman1982@gmail.com>> > > To: observium(a)observium.org <mailto:observium@observium.org> > > Subject: [Observium] Email setup in Config.php > > Message-ID: > > > > <CAMq=ffcjUmV--G_kqRpXMK+ugBQ6OB2eK+6dEsqza4mteHZx4Q(a)mail.gmail.com > <mailto:ffcjUmV--G_kqRpXMK%2BugBQ6OB2eK%2B6dEsqza4mteHZx4Q@mail.gmail.com > >> > > Content-Type: text/plain; charset="utf-8" > > > > Hi, > > > > I have been using Observium for about 1 year successfully and > > recently, > > approximately 3mth ago, I subscribed to the paid version, upgraded > > via SVN > > and copied my config.php. I do not have working email alerts at > > the moment > > and would like to know what needs to be changed to get this > > working again. > > Below is a print of my config.php file. Please advise me as to > > what needs > > to be changed to get email working again. > > > > Config.php: > > > > <?php > > > > ## Have a look in includes/defaults.inc.php for examples of > > settings you > > can set here. DO NOT EDIT defaults.inc.php! > > > > // Database config > > $config['db_host'] = "localhost"; > > $config['db_user'] = "myuesrname"; > > $config['db_pass'] = "mypassword"; > > $config['db_name'] = "observium"; > > > > // Location > > $config['install_dir'] = "/opt/observium"; > > > > // Thie should *only* be set if you want to *force* a particular > > hostname/port > > // It will prevent the web interface being usable form any other > > hostname > > #$config['base_url'] = "http://observium.company.com"; > > > > // Default community list to use when adding/discovering > > $config['snmp']['community'] = array("public"); > > > > // Authentication Model > > $config['auth_mechanism'] = "mysql"; // default, other options: > > ldap, > > http-auth, please see documentation for config help > > > > // Enable alerter > > // $config['poller-wrapper']['alerter'] = TRUE; > > > > // Set up a default alerter (email to a single address) > > > > // SNMP Settings > > $config['snmp']['timeout'] = 1000; # timeout in ms > > $config['snmp']['retries'] = 6; # how many times to > > retry the > > query > > > > //Ping Settings > > $config['ping']['timeout'] = 2000; # timeout in ms > > $config['ping']['retries'] = 10; # how many times to > > retry the > > query > > > > //Alert Settings > > $config['alerts']['email']['default'] = "myemail(a)domain.co.nz > > <mailto:myemail@domain.co.nz>"; > > $config['alerts']['email']['from'] = "observium.dev < > > myeamil(a)domain.co.nz <mailto:myeamil@domain.co.nz>>"; > > $config['alerts']['email']['default_only'] = TRUE; > > $config['alerts']['email']['enable'] = FALSE; > > $config['uptime_warning'] = "14400"; ## Time to > > display > > reboot warning > > //Poller and Discovery Modules > > > > //Syslog settings > > $config['enable_syslog'] = 1; > > $config['syslog_filter'] = array("last message repeated", > > "Connection from > > UDP: [", > > "ipSystemStatsTable node > > ipSystemStatsOutFragOKs not implemented", > > "diskio.c: don't know how to > > handle"); ## > > Ignore some crappy stuff from SNMP daemon > > > > //Geocoding Configuration > > > > > > // End config.php > > > > > > > > *Observium*0.14.8.5763 *Apache*2.2.22 (Ubuntu) > *PHP*5.3.10-1ubuntu3.13 > > *MySQL*5.5.38-0ubuntu0.12.04.1 *SNMP*NET-SNMP version: 5.4.3 > > *RRDtool*1.4.7 > >

2 1

Re: [Observium] observium Digest, Vol 50, Issue 1
by matthew waterman 01 Sep '14

01 Sep '14

Thanks for your replies, I have un commented the line "$config['poller-wrapper']['alerter'] = TRUE;" , and also confirmed that I have the correct cron job configured. I then gave the VM a reboot as It is one of the devices that I observe. Unfortunalty i did not receive an email alert, so I reboot another device for a full 5 minutes so I should have received 1 x email alert for device down and 1 x reboot alert. I did not receive either. Is there a way I can monitor/watch the email being sent or processed to confirm that it is indeed happening? Matt On 1 September 2014 11:20, <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Email setup in Config.php (matthew waterman) > 2. Re: Email setup in Config.php (Tristan Rhodes) > 3. Re: Email setup in Config.php (Nathan Phelan) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 1 Sep 2014 08:32:15 +1200 > From: matthew waterman <mwaterman1982(a)gmail.com> > To: observium(a)observium.org > Subject: [Observium] Email setup in Config.php > Message-ID: > <CAMq= > ffcjUmV--G_kqRpXMK+ugBQ6OB2eK+6dEsqza4mteHZx4Q(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hi, > > I have been using Observium for about 1 year successfully and recently, > approximately 3mth ago, I subscribed to the paid version, upgraded via SVN > and copied my config.php. I do not have working email alerts at the moment > and would like to know what needs to be changed to get this working again. > Below is a print of my config.php file. Please advise me as to what needs > to be changed to get email working again. > > Config.php: > > <?php > > ## Have a look in includes/defaults.inc.php for examples of settings you > can set here. DO NOT EDIT defaults.inc.php! > > // Database config > $config['db_host'] = "localhost"; > $config['db_user'] = "myuesrname"; > $config['db_pass'] = "mypassword"; > $config['db_name'] = "observium"; > > // Location > $config['install_dir'] = "/opt/observium"; > > // Thie should *only* be set if you want to *force* a particular > hostname/port > // It will prevent the web interface being usable form any other hostname > #$config['base_url'] = "http://observium.company.com"; > > // Default community list to use when adding/discovering > $config['snmp']['community'] = array("public"); > > // Authentication Model > $config['auth_mechanism'] = "mysql"; // default, other options: ldap, > http-auth, please see documentation for config help > > // Enable alerter > // $config['poller-wrapper']['alerter'] = TRUE; > > // Set up a default alerter (email to a single address) > > // SNMP Settings > $config['snmp']['timeout'] = 1000; # timeout in ms > $config['snmp']['retries'] = 6; # how many times to retry the > query > > //Ping Settings > $config['ping']['timeout'] = 2000; # timeout in ms > $config['ping']['retries'] = 10; # how many times to retry the > query > > //Alert Settings > $config['alerts']['email']['default'] = "myemail(a)domain.co.nz"; > $config['alerts']['email']['from'] = "observium.dev < > myeamil(a)domain.co.nz>"; > $config['alerts']['email']['default_only'] = TRUE; > $config['alerts']['email']['enable'] = FALSE; > $config['uptime_warning'] = "14400"; ## Time to display > reboot warning > //Poller and Discovery Modules > > //Syslog settings > $config['enable_syslog'] = 1; > $config['syslog_filter'] = array("last message repeated", "Connection from > UDP: [", > "ipSystemStatsTable node > ipSystemStatsOutFragOKs not implemented", > "diskio.c: don't know how to handle"); ## > Ignore some crappy stuff from SNMP daemon > > //Geocoding Configuration > > > // End config.php > > > > *Observium*0.14.8.5763 *Apache*2.2.22 (Ubuntu) *PHP*5.3.10-1ubuntu3.13 > *MySQL*5.5.38-0ubuntu0.12.04.1 *SNMP*NET-SNMP version: 5.4.3 > *RRDtool*1.4.7 >

2 1

Email setup in Config.php
by matthew waterman 31 Aug '14

31 Aug '14

Hi, I have been using Observium for about 1 year successfully and recently, approximately 3mth ago, I subscribed to the paid version, upgraded via SVN and copied my config.php. I do not have working email alerts at the moment and would like to know what needs to be changed to get this working again. Below is a print of my config.php file. Please advise me as to what needs to be changed to get email working again. Config.php: <?php ## Have a look in includes/defaults.inc.php for examples of settings you can set here. DO NOT EDIT defaults.inc.php! // Database config $config['db_host'] = "localhost"; $config['db_user'] = "myuesrname"; $config['db_pass'] = "mypassword"; $config['db_name'] = "observium"; // Location $config['install_dir'] = "/opt/observium"; // Thie should *only* be set if you want to *force* a particular hostname/port // It will prevent the web interface being usable form any other hostname #$config['base_url'] = "http://observium.company.com"; // Default community list to use when adding/discovering $config['snmp']['community'] = array("public"); // Authentication Model $config['auth_mechanism'] = "mysql"; // default, other options: ldap, http-auth, please see documentation for config help // Enable alerter // $config['poller-wrapper']['alerter'] = TRUE; // Set up a default alerter (email to a single address) // SNMP Settings $config['snmp']['timeout'] = 1000; # timeout in ms $config['snmp']['retries'] = 6; # how many times to retry the query //Ping Settings $config['ping']['timeout'] = 2000; # timeout in ms $config['ping']['retries'] = 10; # how many times to retry the query //Alert Settings $config['alerts']['email']['default'] = "myemail(a)domain.co.nz"; $config['alerts']['email']['from'] = "observium.dev < myeamil(a)domain.co.nz>"; $config['alerts']['email']['default_only'] = TRUE; $config['alerts']['email']['enable'] = FALSE; $config['uptime_warning'] = "14400"; ## Time to display reboot warning //Poller and Discovery Modules //Syslog settings $config['enable_syslog'] = 1; $config['syslog_filter'] = array("last message repeated", "Connection from UDP: [", "ipSystemStatsTable node ipSystemStatsOutFragOKs not implemented", "diskio.c: don't know how to handle"); ## Ignore some crappy stuff from SNMP daemon //Geocoding Configuration // End config.php *Observium*0.14.8.5763 *Apache*2.2.22 (Ubuntu) *PHP*5.3.10-1ubuntu3.13 *MySQL*5.5.38-0ubuntu0.12.04.1 *SNMP*NET-SNMP version: 5.4.3 *RRDtool*1.4.7

3 2

Re: [Observium] Syslog msg empty temporary fix
by Mike Stupalov 30 Aug '14

30 Aug '14

1. write questions to list pls, I'm not a service support 2. why do you have a line break in $template, all text betwen $template and \n" this is one line (use copy-paste) 3. about '& stop' vs '& ~', tilde - legacy but still working variant, and therefore suitable for the old and new rsyslog versions and in irc you sayd that syslog messages displayed if in cisco device set logging without timezone, this is not true? On Sat, Aug 30, 2014 at 2:15 PM, Wouter Prins <wp(a)null0.nl> wrote: > It still doesn't work correctly here. > Any idea's? :) > > I've pasted this into /etc/rsyslog.conf: > > -- > $template > observium,"%fromhost%||%syslogfacility%||%syslogpriority%||%syslogseverity%||%syslogtag%||%$year%-%$month%-%$day% > %timereported:8:25%||%msg%||% > programname%\n" > $ModLoad omprog > $ActionOMProgBinary /opt/observium/syslog.php > > :inputname, isequal, "imudp" :omprog:;observium > > & stop > #--------------------------------------------------------- > -- > > Any idea why i still dont see any cisco syslog messages? When i restart > rsyslogd its not complaining about syntax etc. > I do see unix syslog from servers. > > > On 24 August 2014 12:37, Mike Stupalov <mike(a)observium.org> wrote: > >> Hi, >> >> yes, everything works >> >> >> On Sun, Aug 24, 2014 at 11:44 AM, Wouter Prins <wp(a)null0.nl> wrote: >> >>> Hi Mike, >>> >>> Is this config working for you in 14.04.1? >>> >>> >>> On 20 August 2014 07:14, Mike Stupalov <mike(a)observium.org> wrote: >>> >>>> >>>> .. or just use Rsyslog because it is in base Ubuntu system: >>>> http://observium.org/wiki/Rsyslog_Syslog_Server >>>> >>>> >>>> On Wed, Aug 20, 2014 at 1:18 AM, Robert Williams < >>>> Robert(a)custodiandc.com> wrote: >>>> >>>>> Hi, >>>>> >>>>> Further to Pav's comments earlier, I’ve found that setting the >>>>> “no-parse” flag in syslog-ng stops it from messing with the string and >>>>> restores some reasonable sanity to the messages which get passed to >>>>> Observium. Clearly something has changed within syslog-ng from Ubuntu >>>>> 12->14 and this new issue is nothing to do with the >>>>> Observium-importing-the-message element. >>>>> >>>>> For anyone suffering the same fate, the actual setting syntax to be >>>>> used within the Observium definition for syslog-ng is: >>>>> >>>>> source s_net { >>>>> udp(flags(no-parse)); >>>>> }; >>>>> >>>>> This restores 100% normal message structure for /most/ of the devices >>>>> I’ve just tested with, including all the IOS 15.x ones which had all >>>>> started showing simply "%" as the message content. >>>>> >>>>> The ones which are still a little bit broken are the IOS-XR based >>>>> units as they seem to pass a load of process name, event log number, >>>>> process number, favourite colour and other random crap in the “message” >>>>> element. However, they were all a bit broken before all this anyway to be >>>>> fair. >>>>> >>>>> I can see that within the /includes/syslog.php there is a rather >>>>> extensive section of preg_match/replace for a number of $os types. So I >>>>> guess the best way forwards to sanitise the extra IOS-XR crap is to build >>>>> it in there and submit a patch. Although I have a feeling that IOS and >>>>> IOS-XR count as the same $OS type? So we won't necessarily be able to >>>>> filter the manipulation using that to match them. >>>>> >>>>> Anyway, if we make any progress with it we’ll let you know! >>>>> >>>>> Cheers guys, >>>>> >>>>> >>>>> >>>>> Robert Williams >>>>> Custodian Data Centre >>>>> Email: Robert(a)CustodianDC.com >>>>> http://www.CustodianDC.com >>>>> >>>>> _______________________________________________ >>>>> observium mailing list >>>>> observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>> >>>> >>>> >>>> >>>> -- >>>> Mike Stupalov >>>> http://observium.org/ >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> >>>> >>> >>> >>> -- >>> Wouter Prins >>> wp(a)null0.nl >>> >>> >> >> >> -- >> Mike Stupalov >> http://observium.org/ >> > > > > -- > Wouter Prins > wp(a)null0.nl > > -- Mike Stupalov http://observium.org/

2 1

RSS
by Johnson, Edward A. 30 Aug '14

30 Aug '14

I’m trying to get RSS working. php-mcrypt is installed and under “My Settings” it says my RSS/Atom key was created. I can’t find any documentation anywhere that explains anything further.

2 1

Re: [Observium] Avtech Room Alert 4E support?
by Scott Benninger 29 Aug '14

29 Aug '14

I was able to svn add the new file I copied and modified as well as make the diff file with the changes I made to the other files. How would I go about submitting my changes/adds to you to verify and commit? Or does the svn add accomplish this? I am not well versed in the use of svn. Thanks, Scott On Thu, Aug 28, 2014 at 1:53 PM, Adam Armstrong <adama(a)memetic.org> wrote: > Only if you submit them to us and we commit them to the repository. > > "svn add" any new files to SVN and then do "svn diff" to get SVN to > generate a file containing your changes. > > adam. > > > On 2014-08-28 17:52, Scott Benninger wrote: > >> Thanks! I managed to get it working. Not perfect but returns the 2 >> temp sensors I need. There is no internal humidity sensor on the 4E so >> may remove the humidity code as well. >> >> For reference I modified the definitions/os.inc.php roomalert os to >> use the 4E mib. I then coped the 24E sensor .php and modified it to >> use the 4E mibs and had to change the OID from 5 to 6 (the different >> product code) otherwise the mibs are almost the same up until the >> extra sensors that are available in the 24E. >> >> I guess my final question is will all the changes I made stick through >> SVN updates? >> >> Thanks, >> >> Scott >> >> AVTech uses a different MIB for each product, unfortunately. So it needs >> some coding to be done... >> >> Tom >> >> On 08/28/2014 03:41 PM, Adam Armstrong wrote: >> Hi Scott, >> >> You need to write code to discover the objects in the new MIB. >> >> You can look at the old ones as an example, you'll find them in >> includes/discovery/sensors/ >> >> adam. >> >> On 2014-08-28 14:33, Scott Benninger wrote: >> I have been trying to get our Room Alert 4E working to record >> temperature and alert if needed. On the latest svn build(5770). I see >> on the website that the 24E is the only one supported currently since >> they have different MIBS. (FYI they no longer sell the 24E in NA). >> >> I have been able to get it to discover as and AVtech device but I had >> to modify the roomalert discovery and poller php files to add a space >> to RoomAlert as the sysDescr on the 4E is "Room Alert 4E v3.1.1". >> >> I see the 4E mibs are there as well but the temp is not getting >> polled properly. >> >> Is it possible for me to make modifications to get the temp polling >> properly? If so where should I be looking to get the 4E MIBS working >> properly? I am not sure where the mappings are done etc. Is this >> difficult to do? >> >> Otherwise how would I go about getting the working properly? >> >> Thanks, >> >> _ Scott_ >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

2 1

Avtech Room Alert 4E support?
by Scott Benninger 28 Aug '14

28 Aug '14

Thanks! I managed to get it working. Not perfect but returns the 2 temp sensors I need. There is no internal humidity sensor on the 4E so may remove the humidity code as well. For reference I modified the definitions/os.inc.php roomalert os to use the 4E mib. I then coped the 24E sensor .php and modified it to use the 4E mibs and had to change the OID from 5 to 6 (the different product code) otherwise the mibs are almost the same up until the extra sensors that are available in the 24E. I guess my final question is will all the changes I made stick through SVN updates? Thanks, Scott > AVTech uses a different MIB for each product, unfortunately. So it needs > some coding to be done... > > Tom > > On 08/28/2014 03:41 PM, Adam Armstrong wrote: >>* Hi Scott, *>>>>* You need to write code to discover the objects in the new MIB. *>>>>* You can look at the old ones as an example, you'll find them in *>> *includes/discovery/sensors/ *>>>>* adam. *>>>>* On 2014-08-28 14:33, Scott Benninger wrote: *>>>* I have been trying to get our Room Alert 4E working to record *>>>* temperature and alert if needed. On the latest svn build(5770). I see *>>>* on the website that the 24E is the only one supported currently since *>>>* they have different MIBS. (FYI they no longer sell the 24E in NA). *>>>>>>* I have been able to get it to discover as and AVtech device but I had *>>>* to modify the roomalert discovery and poller php files to add a space *>>>* to RoomAlert as the sysDescr on the 4E is "Room Alert 4E v3.1.1". *>>>>>>* I see the 4E mibs are there as well but the temp is not getting *>>>* polled properly. *>>>>>>* Is it possible for me to make modifications to get the temp polling *>>>* properly? If so where should I be looking to get the 4E MIBS working *>>>* properly? I am not sure where the mappings are done etc. Is this *>>>* difficult to do? *>>>>>>* Otherwise how would I go about getting the working properly? *>>>>>>* Thanks, *>>>>>>* Scott*

2 1

Avtech Room Alert 4E support?
by Scott Benninger 28 Aug '14

28 Aug '14

I have been trying to get our Room Alert 4E working to record temperature and alert if needed. On the latest svn build(5770). I see on the website that the 24E is the only one supported currently since they have different MIBS. (FYI they no longer sell the 24E in NA). I have been able to get it to discover as and AVtech device but I had to modify the roomalert discovery and poller php files to add a space to RoomAlert as the sysDescr on the 4E is "Room Alert 4E v3.1.1". I see the 4E mibs are there as well but the temp is not getting polled properly. Is it possible for me to make modifications to get the temp polling properly? If so where should I be looking to get the 4E MIBS working properly? I am not sure where the mappings are done etc. Is this difficult to do? Otherwise how would I go about getting the working properly? Thanks, Scott

3 2

remove old event log data
by Simon Smith 28 Aug '14

28 Aug '14

Hi All, hoping again someone can assist me with my problems or questions… i fixed the WMI problem i was having a few weeks ago, however it has left loads and loads of Device rebooted event logs in my database is the an easy way of deleting this data as really i only wanted the log to show once? not really 2,000 times…. I’ve attached a screenshot of showing the data from the mysql i was simply gunna do 'delete from event log where reference = 2447807' but im not 100% sure incase i screw anything up in the database as its a running live system i use regards Simon

2 1

Re: [Observium] Syslog msg empty temporary fix
by Robert Williams 27 Aug '14

27 Aug '14

Hi, Further to Pav's comments earlier, I’ve found that setting the “no-parse” flag in syslog-ng stops it from messing with the string and restores some reasonable sanity to the messages which get passed to Observium. Clearly something has changed within syslog-ng from Ubuntu 12->14 and this new issue is nothing to do with the Observium-importing-the-message element. For anyone suffering the same fate, the actual setting syntax to be used within the Observium definition for syslog-ng is: source s_net { udp(flags(no-parse)); }; This restores 100% normal message structure for /most/ of the devices I’ve just tested with, including all the IOS 15.x ones which had all started showing simply "%" as the message content. The ones which are still a little bit broken are the IOS-XR based units as they seem to pass a load of process name, event log number, process number, favourite colour and other random crap in the “message” element. However, they were all a bit broken before all this anyway to be fair. I can see that within the /includes/syslog.php there is a rather extensive section of preg_match/replace for a number of $os types. So I guess the best way forwards to sanitise the extra IOS-XR crap is to build it in there and submit a patch. Although I have a feeling that IOS and IOS-XR count as the same $OS type? So we won't necessarily be able to filter the manipulation using that to match them. Anyway, if we make any progress with it we’ll let you know! Cheers guys, Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

4 5

Graph Netstats
by Darian Jimenez 27 Aug '14

27 Aug '14

Hello, Anyone know where I could get an understanding of how to interpret the graphs for network devices? Is there any documentation to help explain what to look for in devices for packet loss or problems with service? I don't see a way to tell packet drops like you would see on a device normally.

3 3

Re: [Observium] Weird database issue?
by Nick Pais 26 Aug '14

26 Aug '14

Hogan, I'm talking about the current throughput, screenshots attached. Please excuse my "fantastic" GIMPing skills :D Thanks! > Message: 2 > Date: Fri, 8 Aug 2014 17:40:03 +0000 > From: Hogan Whittall <whittalh(a)yahoo-inc.com> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Weird database issue? > Message-ID: <6CDB9AE7-7909-401B-80E3-D404CDA371AC(a)yahoo-inc.com> > Content-Type: text/plain; charset="windows-1252" > > If you?re referring to the link speed (100Mb, 1Gb, etc) then that has historically been a problem with permissions when snmpd tries to access ethtool info. You basically have 3 options: > > - Run snmpd as ?root? (Not recommended) > - Enable ETHTOOL_GSET in the kernel > - Add the link speed of each NIC to snmpd.conf (interface ethX 6 <speed in bits/s>) > > I went with the third option and wrote a script to do this for me. This info is kept in the ?ports? table. > > Or are you talking about current throughput and not port speed? > > -Hogan

4 11

fixing graphing of FortiGate memory (used to work, now broken)
by Nathan Phelan 26 Aug '14

26 Aug '14

Hi Guys, Short version: Fortinet memory stops showing in Observium after updating due to Fortinet MIBS not being where Observium expects them. Hack Solution: mv /opt/observium/mibs/FORTINET-* /opt/observium/mibs/fortinet/ ./discovery.php -h all Long version: We have been running a very old version for a long time ( 0.14.1.4945 ) and it's been ticking along nicely but I've finally found some time to do a test update to the latest svn and ran into an issue with Fortigate memory. I ran a discovery with debug; attached as "memory debug.txt". If I run one of those commands manually I get the following: root@clone:/opt/observium# /usr/bin/snmpget -v2c -c 'test -snmp' -OvQ -m FORTINET-FORTIGATE-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/fortinet 'udp':'testdev.test.local':'161' fgSysMemUsage.0 MIB search path: /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/fortinet Cannot find module (FORTINET-FORTIGATE-MIB): At line 0 in (none) fgSysMemUsage.0: Unknown Object Identifier (Sub-id not found: (top) -> fgSysMemUsage) The FORTINET-FORTIGATE-MIB files don't appear to have changed but Observium appears to be looking for them under "/opt/observium/mibs/fortinet/" when they are actually just under "/opt/observium/mibs/" After doing this: root@clone:/opt/observium# cd mibs root@clone:/opt/observium/mibs# mkdir fortinet root@clone:/opt/observium/mibs# mv FORTINET-* ./fortinet/ and then running discovery again memory stats came back. Has anyone else had this issue? If so maybe the MIBS need to be relocated in SVN? Cheers, Nathan

2 1

Quote for feature
by Benoit Lambert 25 Aug '14

25 Aug '14

Where can I get a quote for a new feature? The Professional Services (http://www.observium.org/services/) page doesn't contain any information on who to contact. Thanks, Benoit

6 8

Pagination on edit settings?
by Michael Loftis 25 Aug '14

25 Aug '14

Is there *any* way to get pagination added to the edit setting pages? F/ex the "Sensors" page is unusable on a majority of my devices try waiting for load/render when you've got something like a fully loaded Juniper EX9214 so you can disable a sensor alert on one port ... ~300 ports - it's just pure pain assuming it finishes at all. And then you have to set PHP's limits so high to get the submit/save to work. Another issue is I kind of need an ability to occasionally do a "reset all" on the limits page. Individually checking off hundreds of sensors is a completely unnecessary waste of time. I realise I could go muck in the database for both of these in my particular but thats just not always an option and this just seems like something it should be doing when it hits a couple hundred records or some configurable limit. -- "Genius might be described as a supreme capacity for getting its possessors into trouble of all kinds." -- Samuel Butler

2 1

Re: [Observium] Moving logs and rrds to another partition?
by Benoit Lambert 25 Aug '14

25 Aug '14

If anyone is interested, this is how I did it without shutting down the server. And it worked. #Add 2 30GB disk (sdb1=DB | sdc1=rrd) #Rescan to find HDD - without shutdown echo "- - -" > /sys/class/scsi_host/host2/scan #check if it got added fdisk -l ls -la /dev/sd* #Stop daemons service crond stop service snmpd stop service syslog-ng stop service httpd stop service auditd stop #Stop sql last service mysqld stop #Configure DB HDD fdisk /dev/sdb n p 1 <cr> <cr> w #Configure rrd HDD fdisk /dev/sdc n p 1 <cr> <cr> w #Format them in ext4 mkfs.ext4 /dev/sdb1 mkfs.ext4 /dev/sdc1 #Rename DB folder cd /var/lib/ mv mysql mysql_tmp #Recreate mysql folder mkdir mysql #Mount the DB hard drive mount -t ext4 /dev/sdb1 /var/lib/mysql #Copy files over and preserve owners/perms cp -rp mysql_tmp/* mysql/ #change owner/perms of mysql folder chown mysql:mysql mysql #Rename rrd folder cd /opt/observium mv rrd rrd_tmp #Recreate rrd folder mkdir rrd #Mount the rrd hard drive mount -t ext4 /dev/sdc1 /opt/observium/rrd #Copy files over and preserve owners/perms cp -rp rrd_tmp/* rrd/ #change owner/perms of mysql folder chown apache:apache rrd #mount at startup - edit /etc/fstab /dev/sdb1 /var/lib/mysql ext4 defaults 0 0 /dev/sdc1 /opt/observium/rrd ext4 defaults 0 0 #Start daemons service mysqld start service httpd start service syslog-ng start service snmpd start service crond start service auditd start

2 1

Re: [Observium] help with observium
by Benoit Lambert 25 Aug '14

25 Aug '14

Add this to your config.php #PING Settings - Retries/Timeouts $config['ping']['retries'] = 10; // How many times to retry ping (1 - 10) $config['ping']['timeout'] = 1000; // Timeout in milliseconds (50 - 2000)

3 2

help with observium
by Magnus Svensson 25 Aug '14

25 Aug '14

Hi! I got a problem with my new install. i get messege: 2014-08-25 11:00:01 "host" System Device status changed to Up 2014-08-25 10:55:07 "host" System Device status changed to Down (ping) its always down 5min, and if i ping the host its up. its just observium that think its down. ive google it and tried ping settings in config and i dont get it to work. someone know whats wrong? //magnus

3 3

Status Proxmox-VE-Monitoring
by Cyrill Matenaers 23 Aug '14

23 Aug '14

Hi all, I just read something about Proxmox-Monitoring here http://jira.observium.org/browse/OBSERVIUM-471. What is the actual status of this development? Is there any documetation on how to use it? Thanks for your help! Kind regards, Cyrill

4 6

Re: [Observium] alerting
by Jake Hansen 22 Aug '14

22 Aug '14

Can anyone help with an issue we are having regarding alerting. Every since updating a few weeks ago, we no longer get email alerts when outages occur. I have verified that the email on the server it self is working, we simply get no events generated when things go down. Did something change in this regard? How can I restore email alerts? -- Jake Hansen Sr. Network Administrator ZTelco / Zray Technologies, Inc. 858-431-4411 Direct 858-565-2155 Office

2 1

Apache access config for Ubuntu 14.04
by Al Nash 22 Aug '14

22 Aug '14

Hello Observium Just curious, your documentation here http://www.observium.org/wiki/Debian_Ubuntu_Installation#Problems mentions modifying the Apache access configuration for 13.10 and 14.04. Are there any helpful articles that can assist with making the necessary modifications? Thank You -- <http://dattobackup.com/email-signature> *Al Nash*DEVT Engineer Datto, Inc. 877-455-6015www.dattobackup.com

1 0

Odd real time graph behavior
by Derek 22 Aug '14

22 Aug '14

I'm getting some strange looking graphs on some ports on my routers, where the graph is basically just a bunch of spikes. Set at 1 second intervals, it will register traffic for one tick, then nothing for anywhere from 4-10 ticks, then register traffic again, and so on. This is happening on Cisco 2811's, 2911's, and a 7206VXR, and it happens on the FastEthernet, GigEthernet, and SVI ports on them. If I set the interval to 5 seconds or higher, it looks normal again. Now, these same routers with this problem have no issue doing a 1 second interval on their Serial ports or sub-interfaces. We have several 2960 switches that seem to work just fine. I've attached an example graph to show you what I see. I happen to know that this port had at least a consistent 1MB connection throughout the time period of the graph. Thanks, Derek

3 4

Simple question about application monitoring
by Christopher K. Brown 21 Aug '14

21 Aug '14

Looking at Observium for the first time and wanted confirmation on this: From looking around at an install and the scripts in the scripts/agent-local directory, I believe these data-gathering scripts are executed locally on each host that is being monitored. Is that correct? Thanks!

2 1

Re: [Observium] Moving logs and rrds to another partition?
by Benoit Lambert 21 Aug '14

21 Aug '14

Perfect, thanks! I won't forget to chown/chmod :P Benoit

1 0

Re: [Observium] Moving logs and rrds to another partition?
by Benoit Lambert 21 Aug '14

21 Aug '14

Can I move entire DB to another disk? Like this? : 1. Stop the daemons 2. Rename the DB folder "mv /var/lib/mysql /var/lib/mysql-tmp" 3. Recreate the folder "mkdir /var/lib/mysql" 4. Mount the new disk to the new folder "mount -t ext4 /dev/sdb1 /var/lib/mysql" (put in fstab after) 5. Copy the files from the old folder to the new folder (cp mysql-tmp/* mysql/) 6. Restart the daemons. And voila??? Thanks, Benoit

3 2

Re: [Observium] Moving logs and rrds to another partition?
by Benoit Lambert 21 Aug '14

21 Aug '14

Would this work? http://dev.mysql.com/doc/refman/5.5/en/symbolic-links.html Thanks, Benoit

2 1

Cannot Ping
by Greg Lipschitz 21 Aug '14

21 Aug '14

Hi All, Seeing an issue where the interface is reporting it cannot ping the host but you can ping it fine from the console of the server. Anyone else seen this issue? Adding host xxxxxxxxx community mycomunity port 161 Could not ping xxxxxxxxxxx. Greg Lipschitz Director Summit IT Management<http://www.thesummitgroup.com.au> | Summit Internet<http://www.summitinternet.com.au> | Summit Creative<http://www.summitcreative.com.au> - ‘reach your peak’ Divisions of The Summit Group (Australia) Pty Ltd Phone (Australia): 1300 049 749 Phone (US & Canada): (321) 216 3844 E-mail: Greg(a)thesummitgroup.com.au<mailto:Greg@thesummitgroup.com.au> Internet: http://www.thesummitgroup.com.au/<http://www.thesummitgroup.com.au> Address: Level 1, 39 Railway Road, Blackburn VIC 3130 Postal: P.O. Box 3225, Doncaster East VIC 3109 Follow us on Facebook<http://www.facebook.com/thesummitgroup/> | LinkedIn<http://www.linkedin.com/company/1942329> | Twitter<http://twitter.com/summitgroupau/> -- ExchangeDefender Message Security: Click below to verify authenticity https://admin.exchangedefender.com/verify.php?id=s7LBpcHQ003797&from=greg@t…

2 3

Traffic graphs have red line on it
by Marco Marques 21 Aug '14

21 Aug '14

Hi Guys, When looking at the traffic graphs for the ports on a devices, it has these red lines on the graph. What do they represent? See attached. Marco Marques

4 4

Alert Checker - Device match
by Jake Turner 20 Aug '14

20 Aug '14

Hi All, I hope somebody can help. I’m currently trying to add device alerts for all my Cisco devices. As per the example in the alerting guide I’ve used ‘os equals iOS’ which works perfectly for my iOS devices but doesn’t alert on any of my XR devices. I gave 'os match iOS’ a go but that again only gives iOS devices. ‘os equals iosxr’ pulls the XR devices but obviously not the iOS devices. I’ve also tried the two statements on separate lines and that just breaks the checker. Is there any way to put the iOS and XR devices on one checker (based on os) or am I going to have to look into selecting on hostname or something similar? Thanks Jake Turner

3 3

Moving logs and rrds to another partition?
by Benoit Lambert 20 Aug '14

20 Aug '14

I want to move all logs and rrds to another partition. I know rrds are stored in "/opt/observium/rrd"... But where on disk does Observium store syslogs|eventlogs? Unless they are in the DB and moving them to another partition is impossible...? I have it installed on Centos 6.5. Thanks in advance for any help! Benoit

3 2

Alerting
by RYAN M. vAN GINNEKEN 20 Aug '14

20 Aug '14

Just to be clear Alerting is only available in the paid version? the website observium states future ... "is the future is now"??? this is a very important feature that is lacking Computer King CaN-Mail Surveillance King http://computerking.ca http://canmail.org http://surveillanceking.net Surveillance - Sales Service - Hosting Backup Internet Based Surveillance Systems Custom Service Pac kages Secure IMAP Email - Automated Remote Backups - Photo Blogs - Online ERP and Accounting Packages

4 5

Re: [Observium] No port names in traffic accounting
by Travis Kreikemeier 20 Aug '14

20 Aug '14

Any thoughts on this issue? Is this a known issue? Observium 0.14.7.5736 (stable) TRAVIS KREIKEMEIER From: Travis Kreikemeier Sent: Sunday, August 10, 2014 1:27 PM To: 'observium(a)observium.org' Subject: No port names in traffic accounting When adding a Calix E7 port to a customer in traffic accounting. All of the interfaces in the drop down are blank, so hard to figure out which one to select. A work around I have been doing is going to the switch port and clicking "Create Bill". Would like to add the ports in the traffic accounting area. [cid:image001.jpg@01CFB87C.115A9BC0] Some of the ports on the device: [cid:image002.jpg@01CFB87C.115A9BC0] TRAVIS KREIKEMEIER

8 12

Port Alerts
by Tech8 otelafrica 20 Aug '14

20 Aug '14

Hi Guys On the subscription version, what would be an example of setting up an alert if a serial0/0 or eth0 port goes down on a device? Regards Anton

2 1

server rebooted log over and over again
by Simon Smith 20 Aug '14

20 Aug '14

Hi All, I seem to have an issue with a Windows machine and SNMP, every 5 mins when the Observium checks one of our windows machine, I keep getting ‘Device rebooted after X days’ in the event logs of that machine I did do a server reboot the other day on that machine, however if i enable the Device Ignore, i never see this issue but again thats only a work around!? is the a bug possible?! im happy to help with this issue Regards Simon

1 0

dealing with locations
by Mike Glass 19 Aug '14

19 Aug '14

How does one go about changing the location, is there somewhere I can input gps coordinates to change the map pointers to a specific location. Most of my devices show up in the UK as they are tagged "Server Room". Thanks Mike

8 12

monitor device by multiple ips
by Simon Smith 19 Aug '14

19 Aug '14

Hi All, this is a daft random question, can i monitor a device via multiple ip addresses? for instance, we have a site with a mikrotik router, they currently have 3 internet lines (DONT ASK!) 2xADSL,1xFTTC currently we use PPPOE on the router so we can see the mikrotik directly, ive enabled SNMP remotely and i monitor the box via 1 of the ADSL lines, however its constantly goes up and down and never makes up its mind! the other issue i have is the FTTC line is dynamic ip and never stays the same for more then 48hrs so in my mind, /etc/hosts or DNS for site1.router goes to 1.2.3.4, 5.6.7.8, 9.10.11.12 then every check it always use one of three ip addresses ? am i correct? or is the another way of monitoring this device? regards Simon

6 11

Postgresql fails to execute?
by Kaya Saman 19 Aug '14

19 Aug '14

Hi, I'm running Observium on a FreeBSD 10.0-RELEASE x64 system. For some reason the Postgresql script isn't working; I have turned debugging on: set 0 -> 1 The output however just seems to be: ./postgresql.pl Execute Failed The odd thing is that other Perl based scripts are working on the same box. eg. Apache. the postgresql.conf file has the correct details: db_driver set to: Pg db_host is set to the IP address of the database Jail etc.... These modules are installed which I'm sure are the relevant ones: perl5-5.16.3_11 Practical Extraction and Report Language perl5-5.16.3_11 Practical Extraction and Report Language p5-Class-DBI-3.0.17_1 Simple Database Abstraction p5-Class-DBI-Pg-0.09_1 Extensions to Class::DBI for PostgreSQL p5-DBD-Pg-3.2.1 Provides access to PostgreSQL databases through the DBI p5-DBI-1.631 Perl5 Database Interface, required for DBD::* modules p5-DBIx-ContextualFetch-1.03 Add contextual fetches to DBI p5-Ima-DBI-0.35 Database connection caching and organization Would anyone be able to suggest anything? I have been looking at this: http://www.observium.org/wiki/Application/Postgresql but unfortunately it's not very helpful in my case. Permissions are also set properly. Thanks. Kaya ./postgresql.pl Execute failed ./postgresql.pl Execute failed root@Alpha-Ray: ./postgresql.pl Execute failed ./postgresql.pl Execute failed

1 0

Syslog msg empty temporary fix
by Pavelas Sokolovas 19 Aug '14

19 Aug '14

Hi, all. After dist upgrade from Ubuntu 12.04 to 14.04 syslog messages from cisco IOS devices became empty. There is a similar thread/bug: http://jira.observium.org/browse/OBSERVIUM-850 http://postman.memetic.org/pipermail/observium/2014-August/007527.html We’ve managed to work around it by changing: template ("$HOST||$FACILITY||$PRIORITY||$LEVEL||$TAG||$YEAR-$MONTH-$DAY $HOUR:$MIN:$SEC||$MSG||$PROGRAM\n") to: template ("$HOST||$FACILITY||$PRIORITY||$LEVEL||$TAG||$YEAR-$MONTH-$DAY $HOUR:$MIN:$SEC||:: : :: $MSG||$PROGRAM\n") in syslog config. For the developers: it happened after update of syslog/php to 3.5.3-1 [@9695e81] / PHP 5.5.9-1ubuntu4.3 from whatever was current on Ubuntu 12.04 LTS , worked fine before that. Also, the data examplesyslog sends to the script is: 10.x.x.x||local7||notice||notice||bd||2014-08-19 20:21:10||%SYS-5-CONFIG_I: Configured from console by xx on vty3 (10.x.x.xx)||BST Hope this helps! Pav Pavelas Sokolovas Custodian Data Centre Email: ps(a)CustodianDC.com http://www.CustodianDC.com

1 0

Billing history
by Simon Schmitz 19 Aug '14

19 Aug '14

hello, there is a plan for a billing history with over the last month? Greetings Simon

3 4

Question octets to Mbps conversion.
by Senses0 19 Aug '14

19 Aug '14

Hi, I am using below query to convert ifInOctets_rate to Mbps value. mysql> SELECT ifInOctets_rate, CONCAT(ROUND((ifInOctets_rate*8)/1024/1024,2), " Mbps") ConvertedValue FROM `ports-state` WHERE port_id=105; +-----------------+----------------+ | ifInOctets_rate | ConvertedValue | +-----------------+----------------+ | 55014356 | 419.73 Mbps | +-----------------+----------------+ The value I get different from the value printed on the graph for the same port_id. On the graph I got 427Mbps, while this conversion gives me 419. Since I don't know where in the code this conversion happens, I couldn't figure out if this is the way to go about it or not. Could someone shed some light? Thanks

4 6

Observium SNMP VMware Hosts
by Darian Jimenez 18 Aug '14

18 Aug '14

Hello, I am able to monitor pretty much everything from firewalls to switches but I am having problems with my vmware hosts. It will add the devices fine via SNMP but when it comes to polling them it will give an "SNMP UnreachableMySQL" after running the poller.php -h 'vmware host' It will show as down on the site and every now and then it comes back online. Then it will show as down again.Attached is a screenshot of the polling information.[image: Inline image 1]

2 1

Accessing our subscription
by Richard Berndt 18 Aug '14

18 Aug '14

We did purchase the subscription edition of Observium. How do we access the SVN?

2 1

Add_device fails at SNMP
by Richard Berndt 18 Aug '14

18 Aug '14

I am a little confused and looking for suggestions on what I can do to troubleshoot this issue. On the machine that I am running Observium on I can use snmpwalk to view the device’s system information. ubuntu@mgh-netmon:/opt/observium$ snmpwalk -Os -v 2c -c communitystring mx-hospital system sysDescr.0 = STRING: Meraki MX80 Cloud Managed Security Appliance sysObjectID.0 = OID: enterprises.29671.2.103 sysName.0 = STRING: MX-HOSPITAL sysORID.1 = OID: snmpMIB sysORID.2 = OID: vacmBasicGroup sysORID.3 = OID: ifMIB sysORDescr.1 = STRING: The MIB module for SNMPv2 entities sysORDescr.2 = STRING: View-based Access Control Model for SNMP. sysORDescr.3 = STRING: The MIB module to describe generic objects for network interface sub-layers sysORUpTime.1 = Timeticks: (1) 0:00:00.01 sysORUpTime.2 = Timeticks: (1) 0:00:00.01 sysORUpTime.3 = Timeticks: (16) 0:00:00.16 However when I use add_device it tells me that it cannot add the device. ubuntu@mgh-netmon:/opt/observium$ ./add_device.php mx-hospital communitystring v2c 161 udp Observium v0.14.4.5229 Add Device(s) Try to add mx-hospital: Trying v2c community communitystring ... No reply on community communitystring using v2c. Could not reach mx-hospital with given SNMP community using v2c. Devices skipped: 1. Any ideas? I know it Is not a network/firewall related issue since SNMPWALK can access the device. I know it is not an SNMP string issue because both SNMPWALK and another monitoring system is able to access this device using the provided SNMP string.

3 4

Up/Down Monitoring
by Lane Eckley 18 Aug '14

18 Aug '14

Hi Guys, I am attempting to setup an alert checker for when a server goes into a "down" state for either SNMP or Ping - ideally I would like to create one alert checker for each (ping & snmp). Reviewing the metrics documentation I believe I should be using a combination of the following two: device_status (0 = down, 1 = up) device_status_type (reason for down, 'snmp'/'ping') Using the above I am failing miserably it seems as I am unable to get the alert checker to "match" a machine I turned off to do the testing. Can anyone share a quick step by step on how to setup this alert checker correctly? Thanks! -Lane

3 4

Remove WiFi errors from dashboard
by Franjo Posavec 18 Aug '14

18 Aug '14

Is posible to remove wifi errors from dashboard, like on atachment? -- Franjo Posavec system administrator entitas d.o.o. M: +385 (0)98 8808 72 S: franjo.posavec

2 2

Observium Remote Poller Option
by Ben House 17 Aug '14

17 Aug '14

Hello There, Does Observium have an ability to deploy poller nodes. We currently support a number of fixed wireless networks in which we don't have visibility into. We are looking to deploy a remote node to poll/monitor remote network devices i.e deploy a VM into network and have necessary ports open back to master node and have single display? Let me what's possible for the above requirement. -- Message protected by MailGuard: e-mail anti-virus, anti-spam and content filtering. http://www.mailguard.com.au

2 1

http-auth
by John P Arends 17 Aug '14

17 Aug '14

I configured observium to use the http-auth method combined with our web sso system. I believe it is OpenAM, but I’m a consumer of the service and not someone who maintains it. I’m mentioning this because the docs state there are no known users of http-auth. It works well, and required no configuration on my part. I just have to create users for each person that match their campus NetIDs. This is incredibly useful.

2 1

Traffic Accounting > Accurate Graphs
by Spencer Gaw 15 Aug '14

15 Aug '14

Anyone else getting a jpgraph error 25008 when trying to view Accurate Graphs in Traffic Accounting? I don't frequent this area very often and just noticed it today. Regards, SG

1 1

Setting Alerts
by Darian Jimenez 15 Aug '14

15 Aug '14

hello, I want to setup alerts inside of observium to notify us if any links go down basically. Nothing fancy but just link connectivity/ping tests maybe. Is the alerting feature only available on the paid version? Thanks, Darian

1 0

Deleting Device
by Mike Glass 15 Aug '14

15 Aug '14

I have deleted a router that we no longer have in Observium, it is now back and replicates multiple times throughout the week, how can I keep this from happening, I have used both command line and web interface to delete. Thanks Mike

3 3

Harddisk email alerts
by Tech8 otelafrica 15 Aug '14

15 Aug '14

Hi guys I want to set up email alerts for harddrive space how would I set that up? Regards Anton

2 1

paid version not reporting any data
by Anthony Polselli 14 Aug '14

14 Aug '14

Got something very odd going on...after testing Observium, I purchased it and installed it onto a clean Ubuntu VM. Everything went fine, I added devices, cron job, etc and started to get some graphs. But yesterday and todays graphs are all blank. When I drill-down to a specific interface and click on real-time, I get these odd spikes where it shows 31Mbps In (which is high for this port). I did a side-by-side comparison to the test VM I setup with the free version of Observium and the real-time is working correctly there. [cid:image001.jpg@01CFB7C1.2D1F4970] __________________________________________ Anthony Polselli, Chief Technology Officer Natural Networks, Inc. 10225 Barnes Canyon Rd. Suite A105 San Diego, CA 92121 anthony(a)naturalnetworks.com<mailto:anthony@naturalnetworks.com> http://www.naturalnetworks.com<http://www.naturalnetworks.com/> (619) 222-3232 office (858) 202-0301 fax

1 0

Observium Syslog-NG and Cisco Catalyst
by Tomasz Karczewski 14 Aug '14

14 Aug '14

Hi, I've got one problem with logs from cisco catalyst switches. On switches logs looks fine but in observium i have something like that "% :" Other vendors looks fine in logs. Where could be the problem? Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

3 3

Observium constantly device down and up by ping
by Chris Pelling 14 Aug '14

14 Aug '14

Hi Guys, Our observium (latest) 0.14.8.5749 has for some time been showing devices up and down in the event log, graphs missing chucks of information as well. As an example, here is the memory usage on one ubnt box, but, its the same for others too (network / memory ) http://gyazo.com/18db347a5d49e557c082f343b8e96ea5 Here is the copy of the event log for the device : http://gyazo.com/4324c896e6cc268a8869d17c80964340 I can't seem to narrow it down. The machine is running Ubuntu 12.04.5 LTS and as mentioned above, latest Observium. Any ideas where to poke ? Its not a single device, its multiple devices. The only thing so far I have not swapped out is the server observium sits on. -- Kind regards, Chris

2 1

CBQoS 'drop' vs 'policed-transmit'
by Robert Williams 14 Aug '14

14 Aug '14

Hi, Just noticed that the CBQoS stuff has gone active recently (which is very cool) - currently we get all this via (very) painful integration with Cacti. On looking closer I've found what I think is an issue, but stand ready to be corrected. What I think is happening is that Observium is considering packets the Cisco counted as "Exceeded" to have been "Dropped" where in reality they were just re-marked and transmitted normally. As an example, here is the graph for gi3/1 (class-default) on a 6500 chassis: Here is the output of the show policy-map int gi3/1: GigabitEthernet3/1 Service-policy input: <name> class-map: <Class A> (match-any) Match: protocol arp Match: access-group name <ACL A1> Match: access-group name <ACL A2> police : 32000 bps 102400 limit 102400 extended limit Earl in slot 3 : 1377162657 bytes 5 minute offered rate 2280 bps aggregate-forwarded 1377162657 bytes action: transmit exceeded 0 bytes action: drop <- Zero drops aggregate-forward 2520 bps exceed 0 bps class-map: class-default (match-any) Match: any police : 40000000 bps 3200000 limit 3200000 extended limit 1000000000 pir-bps Earl in slot 3 : 10562039041987 bytes 5 minute offered rate 11748848 bps aggregate-forwarded 10562039041987 bytes action: set-dscp-transmit exceeded 297846881624 bytes action: policed-dscp-transmit violated 0 bytes action: drop <- Zero drops aggregate-forward 13842064 bps exceed 0 bps violate 0 bps So in summary, there have never been any actual drops on the port, only re-marking of the DSCP (incrementing the exceeded counter) and then a transmit. Since the re-marking occurs in the "exceeded" counter, I think Observium is considering them as dropped, instead of just exceeded. This also messes up the pre-policy and post-policy counters, because it implies that traffic didn't make it through when in reality it all did. We use re-marking extensively and so all of the CBQoS graphs show incorrect drop and post-policy information. Either that or we've got a bug/misconfiguration (or I just don't get it), so maybe someone else can confirm? Let me know what debug info is needed if it helps :) Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

3 9

Possible bug in BGP Prefixes graphs?
by Erwin Heringa 14 Aug '14

14 Aug '14

Hi Observium team, Earlier this week the global route table hit 512k prefixes, so I was looking in Observium how many prefixes each peer announces. But there is something wrong that I can't explain and it could be a bug. This morning I upgraded to the latest (paid) version r5747, that didn't change this. For peer 195.69.144.192 my Juniper router shows 89 received prefixes: rtr1> show bgp neighbor 195.69.144.192 | match prefixes Active prefixes: 47 Received prefixes: 89 Accepted prefixes: 89 Advertised prefixes: 7 Via snmp on the router: This peer has index 155, and Peer with index 155 has 89 prefixes: rtr1> show snmp mib wal decimal 1.3.6.1.4.1.2636.5.1.1.2.1.1 | match 144.192 | match PeerIndex jnxBgpM2PeerIndex.0.1.195.69.144.49.1.195.69.144.192 = 155 rtr1> show snmp mib wal decimal 1.3.6.1.4.1.2636.5.1.1.2.6.2 | match \.155\. | match Prefixes jnxBgpM2PrefixInPrefixes.155.1.1 = 89 jnxBgpM2PrefixInPrefixesAccepted.155.1.1 = 89 jnxBgpM2PrefixInPrefixesRejected.155.1.1 = 42 jnxBgpM2PrefixOutPrefixes.155.1.1 = 7 Via snmp on the Observium server: snmpwalk -v3 -l authPriv -u ***** -a SHA -A ****** -x AES -X ******* rtr1 1.3.6.1.4.1.2636.5.1.1.2.6.2 | grep \.155\. iso.3.6.1.4.1.2636.5.1.1.2.6.2.1.7.155.1.1 = Gauge32: 89 iso.3.6.1.4.1.2636.5.1.1.2.6.2.1.8.155.1.1 = Gauge32: 89 iso.3.6.1.4.1.2636.5.1.1.2.6.2.1.9.155.1.1 = Gauge32: 42 iso.3.6.1.4.1.2636.5.1.1.2.6.2.1.10.155.1.1 = Gauge32: 7 But the graphs looks like this, with only 8 prefixes: [cid:image001.png@01CFB7A9.99364360] And even worse for our transit provider: rtr1> show bgp neighbor 195.69.144.34 | match prefixes Active prefixes: 158327 Received prefixes: 505071 Accepted prefixes: 505070 Advertised prefixes: 7 snmpwalk -v3 -l authPriv -u ***** -a SHA -A ***** -x AES -X ****** rtr1 1.3.6.1.4.1.2636.5.1.1.2.6.2.1 | grep '\.4\.1\.1' iso.3.6.1.4.1.2636.5.1.1.2.6.2.1.7.4.1.1 = Gauge32: 505068 iso.3.6.1.4.1.2636.5.1.1.2.6.2.1.8.4.1.1 = Gauge32: 505066 iso.3.6.1.4.1.2636.5.1.1.2.6.2.1.9.4.1.1 = Gauge32: 346727 iso.3.6.1.4.1.2636.5.1.1.2.6.2.1.10.4.1.1 = Gauge32: 7 [cid:image002.png@01CFB7AC.69D3A650] This behavior seems to have changed around March 1st. Any thoughts? Met vriendelijke groet, kind regards, Erwin Heringa SIDN | Meander 501 | 6825 MD | Postbus 5022 | 6802 EA | ARNHEM T +31 (0)26 352 55 59 | F +31 (0)26 352 55 05 erwin.heringa(a)sidn.nl | www.sidn.nl

1 0

syslog no msg
by Vilberg Eiríksson 14 Aug '14

14 Aug '14

Hi All, I have just set up observium now and successfulli integrated it with syslog-ng but i am not seeing anything in the message column. I have tried the patch from her: http://jira.observium.org/browse/OBSERVIUM-850?jql=text%20~%20%22msg%22 but it did not work. If i go to mysql and check the msg field in the syslog table it is just empy (or just has %). All my devices are cisco devices running IOS. Any ideas? Regards Vilberg

2 1

process list WMI
by Simon Smith 13 Aug '14

13 Aug '14

Hi all, just a quick question is the currently a WMI module that checks out for number of running Processes for a windows machine? or even a table I can look at to see the currently running processes on observium? I’ve seen your able to get ahold of the processes via WMI just not sure if the is one already integrated? if the isn’t, can anyone point me in the direction as to create the module ? regards Simon

2 1

Internet 512k global routes
by KENNETH D MILLER II 13 Aug '14

13 Aug '14

With the Internet hitting 512k routes, I was looking in observium for the IPv4 prefixes for our Brocade XMR routers. I'm getting a draw error on all prefix updates. graphs/type=bgp_updates is working ok. graphs/type=bgp_prefixes_ipv4unicast or any of the prefix graphs are not. I've tried on observium version 5728 and CE version 5229. Is anyone else using XMR, CES/CER, or MLX routers getting the same thing? Thanks, Ken

1 0

Description in CentOS Interfaces
by Andres Pugawko 13 Aug '14

13 Aug '14

Hi ! Somebody know if it is possible to add description in CentOS interfaces? There is a script for adding description in Debian interfaces, Is there another for centOS or somebody developed one? Regards Andres Pugawko Network Engineer Description: cid:image001.jpg@01CEAF1A.D081C8A0 Cámara Argentina de Internet – CABASE IXP Suipacha 128 - Piso 3° F (C1008AAD) Buenos Aires - Argentina Tel: (54-11) 4326-0777 int 9112 Cel: 11-6915-7866 <http://www.cabase.org.ar/> www.cabase.org.ar

2 1

Billing
by Mike Grant 13 Aug '14

13 Aug '14

I have the subscription version and have the billing working. What I am trying to do is work out if I can only bill certain traffic. i.e. I only want to charge for international traffic at a $ per MB rate but charge nothing for local traffic. I'm using a Mikrotik Cloudcore router, the international data goes out one gateway and the domestic out another. So I really only want to bill the data for a port that goes in and out one particular gateway. Anyone doing anything like this? Thanks, Mike.

4 5

Defunct processes
by kai＠angry-monk.com 12 Aug '14

12 Aug '14

Hey, Ever since I installed observium I've been getting lost of defunct "sh" processes showing up in my process list. I'm running Ubuntu Linux. 14.04 LTS Linux ***** 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux I'm running the latest version of the Open source edition (installed 2 days ago) and I see this in my process list all the time since the install. www-data 27725 0.0 0.0 0 0 ? Z 10:37 0:00 [sh] <defunct> www-data 28164 0.0 0.0 0 0 ? Z 10:42 0:00 [sh] <defunct> www-data 28589 0.0 0.0 0 0 ? Z 10:47 0:00 [sh] <defunct> www-data 28989 0.0 0.0 0 0 ? Z 10:52 0:00 [sh] <defunct> www-data 28991 0.0 0.0 0 0 ? Z 10:52 0:00 [sh] <defunct> www-data 29398 0.0 0.0 0 0 ? Z 10:57 0:00 [sh] <defunct> www-data 29810 0.0 0.0 0 0 ? Z 11:02 0:00 [sh] <defunct> www-data 29820 0.0 0.0 0 0 ? Z 11:02 0:00 [sh] <defunct> www-data 30656 0.0 0.0 0 0 ? Z 11:12 0:00 [sh] <defunct> www-data 31062 0.0 0.0 0 0 ? Z 11:17 0:00 [sh] <defunct> www-data 31074 0.0 0.0 0 0 ? Z 11:17 0:00 [sh] <defunct> www-data 31903 0.0 0.0 0 0 ? Z 11:27 0:00 [sh] <defunct> www-data 32698 0.0 0.0 0 0 ? Z 11:37 0:00 [sh] <defunct> www-data 32700 0.0 0.0 0 0 ? Z 11:37 0:00 [sh] <defunct> www-data 32722 0.0 0.0 0 0 ? Z 11:37 0:00 [sh] <defunct> www-data 32732 0.0 0.0 0 0 ? Z 11:37 0:00 [sh] <defunct> Any Suggestions? Kai

1 0

Re: [Observium] Billing
by Anthony Polselli 12 Aug '14

12 Aug '14

Netflow Sent from my Android phone using TouchDown (www.nitrodesk.com) -----Original Message----- From: Mike Grant [mikeg(a)itcl.co.nz] Received: Tuesday, 12 Aug 2014, 2:04PM To: observium(a)observium.org [observium(a)observium.org] Subject: [Observium] Billing I have the subscription version and have the billing working. What I am trying to do is work out if I can only bill certain traffic. i.e. I only want to charge for international traffic at a $ per MB rate but charge nothing for local traffic. I’m using a Mikrotik Cloudcore router, the international data goes out one gateway and the domestic out another. So I really only want to bill the data for a port that goes in and out one particular gateway. Anyone doing anything like this? Thanks, Mike.

1 0

Sensor_value alerts do not process
by Alain Gyger 12 Aug '14

12 Aug '14

I'm using SVN version 5742 and all of my alerts work except those that are supposed to check a sensor_value metric. I'm able to check and get emails for alerts on processor_usage, toner_current, and mempool_perc, to name a few, so I know the system is working. When I run the alerter.php script against one of the hosts indicated under the processor_usage alert and I get "1 Status: OK" messages. But when I run alerter.php against a host indicated under the sensor_value alert for Battery Capacity or for APC UPS Temperature I get "-1 Unknown status". The graphs for these sensors are fine, the MySQL table sensors-state lists the correct values as well. My configuration for temperature looks like this: Entity Type: Temperature Delay: 1 Status: 0/0/0/0/2 Check Conditions: Require any condition Tests: sensor_value gt 40 Device Match: type match power Entity Match: sensor_descr match Temp* The alert checker seems fine, but it looks like the tests are failing when they are run. Has anyone else had the same issues with sensor_value alerts? Or is this feature not quite ready to be used?

1 0

Re: [Observium] buying the paid version
by Anthony Polselli 12 Aug '14

12 Aug '14

Thanks, but already did that step on Friday Sent from my Android phone using TouchDown (www.nitrodesk.com) -----Original Message----- From: Travis Kreikemeier [travis(a)travko.com] Received: Monday, 11 Aug 2014, 8:07PM To: Observium Network Observation System [observium(a)observium.org] Subject: Re: [Observium] buying the paid version Anthony, Hope this helps. http://www.observium.org/subscribed/ TRAVIS KREIKEMEIER From: observium [mailto:observium-bounces@observium.org] On Behalf Of Anthony Polselli Sent: Monday, August 11, 2014 9:57 PM To: observium(a)observium.org Subject: [Observium] buying the paid version Hi all, On Friday, I purchased the paid version and really anxious to get it up and running but my login isn’t working yet. Can someone kindly point me in the right direction of who to contact about this… Thanks, [cid:image001.jpg@01CFB5B0.8D5456E0] __________________________________________ Anthony Polselli, Chief Technology Officer Natural Networks, Inc. 10225 Barnes Canyon Rd. Suite A105 San Diego, CA 92121 anthony(a)naturalnetworks.com<mailto:anthony@naturalnetworks.com> http://www.naturalnetworks.com<http://www.naturalnetworks.com/> (619) 222-3232 office (858) 202-0301 fax

4 4

buying the paid version
by Anthony Polselli 11 Aug '14

11 Aug '14

Hi all, On Friday, I purchased the paid version and really anxious to get it up and running but my login isn't working yet. Can someone kindly point me in the right direction of who to contact about this... Thanks, [cid:image001.jpg@01CFB59E.416545D0] __________________________________________ Anthony Polselli, Chief Technology Officer Natural Networks, Inc. 10225 Barnes Canyon Rd. Suite A105 San Diego, CA 92121 anthony(a)naturalnetworks.com<mailto:anthony@naturalnetworks.com> http://www.naturalnetworks.com<http://www.naturalnetworks.com/> (619) 222-3232 office (858) 202-0301 fax

2 1

Map Settings
by chott＠praha1.net 11 Aug '14

11 Aug '14

Hello, How i can set HOME location in Map? Or can i set some zoom? Like default Street address? Tomas

2 2

No port names in traffic accounting
by Travis Kreikemeier 10 Aug '14

10 Aug '14

When adding a Calix E7 port to a customer in traffic accounting. All of the interfaces in the drop down are blank, so hard to figure out which one to select. A work around I have been doing is going to the switch port and clicking "Create Bill". Would like to add the ports in the traffic accounting area. [cid:image003.jpg@01CFB49E.C9494B50] Some of the ports on the device: [cid:image004.jpg@01CFB49E.C9494B50] TRAVIS KREIKEMEIER

1 0

Clean up duplicate ports in DB?
by Hogan Whittall 08 Aug '14

08 Aug '14

Long story short, there was a period of time where hosts were added and removed from Observium a number of times (Essentially all hosts added, deleted, added, etc). In general, there were no ill effects other than losing the previous graph data and ports not being deleted from the DB when hosts were removed. So now I have this. mysql> select count(*) from ports; +----------+ | count(*) | +----------+ | 20701 | +----------+ 1 row in set (0.00 sec) 907+5+1+582 = 1495 So there are a number of stale/orphaned port entries in the DB. What would be the best way to fix this? Thanks! -Hogan

2 2

IPMI setup
by Matthew Green 08 Aug '14

08 Aug '14

Hi, >From the reading I've done it seems that Observium supports IPMI and I've got a Supermicro motherboard I'd like to get stats from. However, I can't see any way to configure the device, if I try to add devices it only lets me poll over SNMP, which the Supermicro board doesn't seem to allow. Other than stating that you need IPMItools installed, the Observium documentation doesn't provide any details about how IPMI devices should be configured. Can anyone point me in the right direction? Cheers, Matt

2 1

Weird database issue?
by Nick Pais 08 Aug '14

08 Aug '14

Hi guys, It's been a while since I posted on here, but I made a fresh Observium installation (for the moment, yes, it's CE, can't convince the CEO to shell out that cash for Pro yet...) however I'm having a weird issue with the table ports-state: root@comet:/opt/observium# ./poller.php -h 1 -d | grep -C2 MEMORY\ DB SQL[INSERT INTO `ports-state` (`port_id`) VALUES ('1')] Certain MEMORY DB error for table 'ports-state'. SQL[UPDATE `ports-state` set `poll_time` ='1407517231',`poll_period` ='1407517231',`ifInOctets` ='2974209',`ifOutOctets` ='2974209',`ifInErrors` ='0',`ifOutErrors` ='0',`ifInUcastPkts` ='10310',`ifOutUcastPkts` ='10310',`ifInOctets_perc` ='0',`ifOutOctets_perc` ='0',`ifOctets_rate` ='0',`ifUcastPkts_rate` ='0',`ifErrors_rate` ='0' WHERE `port_id` = '1'] -- SQL[INSERT INTO `ports-state` (`port_id`) VALUES ('2')] Certain MEMORY DB error for table 'ports-state'. SQL[UPDATE `ports-state` set `poll_time` ='1407517231',`poll_period` ='1407517231',`ifInOctets` ='997162274',`ifOutOctets` ='12070347',`ifInErrors` ='0',`ifOutErrors` ='0',`ifInUcastPkts` ='929556',`ifOutUcastPkts` ='92562',`ifInOctets_perc` ='0',`ifOutOctets_perc` ='0',`ifOctets_rate` ='0',`ifUcastPkts_rate` ='0',`ifErrors_rate` ='0' WHERE `port_id` = '2'] -- SQL[INSERT INTO `ports-state` (`port_id`) VALUES ('3')] Certain MEMORY DB error for table 'ports-state'. SQL[UPDATE `ports-state` set `poll_time` ='1407517231',`poll_period` ='1407517231',`ifInOctets` ='17012646',`ifOutOctets` ='369532358',`ifInErrors` ='0',`ifOutErrors` ='0',`ifInUcastPkts` ='74830',`ifOutUcastPkts` ='550361',`ifInOctets_perc` ='0',`ifOutOctets_perc` ='0',`ifOctets_rate` ='0',`ifUcastPkts_rate` ='0',`ifErrors_rate` ='0' WHERE `port_id` = '3'] root@comet:/opt/observium# This in turn doesn't enable the "current" port speeds on the web and when I look in the database itself, the table is empty. Has anyone come accross this before? Is there a way to fix this? Details: OS: Debian 7.6 PHP: 5.4.4-14+deb7u12 MySQL: 5.6.15 Observium: v0.14.4.5229 Thanks in advance guys!

2 1

Patch for Jira ticket 333 throws error
by Laurens Vets 08 Aug '14

08 Aug '14

Hello, I've installed Netdisco 2 with the Observium plugin. This plugin allows Netdisco to show graphs and open interface pages in Observium from within Netdisco. This is also related to Jira ticket 333. When I open a URL, http://observium.server//device/hostname=name.domainname/tab=port/ifdescr=R…) in Netdisco, I get the following error: "Invalid device/port combination. The port/device combination was invalid. Please retype and try again.". However, the correct page is shown in Observium... Any idea what generates this error message?

3 3

Bind graph problems
by Brad Pearpoint 07 Aug '14

07 Aug '14

Hi all, I have a problem with my bind graphs in Observium 0.14.8.5736 with RRDtool 1.4.7. I have the Unix-agent configured with the bind plugin on two dev DNS servers. These DNS servers are under really low load, just a couple of requests a minute at most. If I run dns# ./bind | grep -i req-in,Q I receive: req-in,QUERY:1562 Which is correct. Then on my Observium box if I run: obs# rrdtool info /opt/observium/rrd/dns2 /app-bind-1-req-in.rrd | grep query ds[query].index = 0 ds[query].type = "DERIVE" ds[query].minimal_heartbeat = 600 ds[query].min = 0.0000000000e+00 ds[query].max = 7.5000000000e+06 ds[query].last_ds = "1562" <<<<<<<<< Looks good ds[query].value = 0.0000000000e+00 ds[query].unknown_sec = 0 But my graphs in the web interface of totally wrong. My incoming requests graph is showing 100-250 million. Any tips of where to start looking to solve this? Thanks, Brad

4 4

No description names on Calix
by Travis Kreikemeier 07 Aug '14

07 Aug '14

In Observium we are not getting any port descriptions on Calix E7 active ports, nor are we getting ONT names on GPON. Something we need to change or needs to be added to Observium? Thanks! [cid:image001.png@01CFB227.ED080C30] TRAVIS KREIKEMEIER

2 1

Ubuntu vs CentOS
by Anthony Polselli 07 Aug '14

07 Aug '14

Hi all, We are looking at purchasing the software and want to know which platform is better? We are a CentOS shop, but if we need paid support or want some custom development done, would Ubuntu be better? Thanks, [cid:image001.jpg@01CFB213.F86539E0] __________________________________________ Anthony Polselli, Chief Technology Officer Natural Networks, Inc. 10225 Barnes Canyon Rd. Suite A105 San Diego, CA 92121 anthony(a)naturalnetworks.com<mailto:anthony@naturalnetworks.com> http://www.naturalnetworks.com<http://www.naturalnetworks.com/> (619) 222-3232 office (858) 202-0301 fax

5 5

billing module / e-mail
by Anthony Polselli 07 Aug '14

07 Aug '14

Is it possible to get an automated monthly e-mail listing all of the clients that went over on usage? [cid:image001.jpg@01CFB19F.8FF099A0] __________________________________________ Anthony Polselli, Chief Technology Officer Natural Networks, Inc. 10225 Barnes Canyon Rd. Suite A105 San Diego, CA 92121 anthony(a)naturalnetworks.com<mailto:anthony@naturalnetworks.com> http://www.naturalnetworks.com<http://www.naturalnetworks.com/> (619) 222-3232 office (858) 202-0301 fax

2 1

Re: [Observium] Freeradius monitoring
by Tomasz Karczewski 07 Aug '14

07 Aug '14

Anyone? Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tomasz Karczewski Sent: Thursday, August 07, 2014 11:12 AM To: 'Observium Network Observation System' Subject: [Observium] Freeradius monitoring Hi, I'm trying to figure out how to monitor freeradius application in observium. It's hard to find anything. Could you help me with that? Tnx Thomas

3 3

API access key
by Greg Lipschitz 07 Aug '14

07 Aug '14

Evening All, I've noticed in the settings, the option for "API access key" but it doesn't yet seem that it's implemented. We're currently looking at doing some development to pull the graphs for services from Observium and inject them in to our Client Portal so that clients get nice pretty graphs. Has anyone done something similar? Some guidance or pointers would be great :) Cheers! Greg Greg Lipschitz Director Summit IT Management<http://www.thesummitgroup.com.au> | Summit Internet<http://www.summitinternet.com.au> | Summit Creative<http://www.summitcreative.com.au> - ‘reach your peak’ Divisions of The Summit Group (Australia) Pty Ltd Phone (Australia): 1300 049 749 Phone (US & Canada): (321) 216 3844 E-mail: Greg(a)thesummitgroup.com.au<mailto:Greg@thesummitgroup.com.au> Internet: http://www.thesummitgroup.com.au/<http://www.thesummitgroup.com.au> Address: Level 1, 39 Railway Road, Blackburn VIC 3130 Postal: P.O. Box 3225, Doncaster East VIC 3109 Follow us on Facebook<http://www.facebook.com/thesummitgroup/> | LinkedIn<http://www.linkedin.com/company/1942329> | Twitter<http://twitter.com/summitgroupau/> -- ExchangeDefender Message Security: Click below to verify authenticity https://admin.exchangedefender.com/verify.php?id=s77BXM8O023601&from=greg@t…

2 3

windows wmi monitoring
by Simon Smith 07 Aug '14

07 Aug '14

Hi All, hoping someone can help, altho I'm sure this has been answered in the past? i just can’t find the webpage or emails from it at all i want to monitor a few windows machines i have setup the SNMP correctly and all is well but the processor is being detected as Unknown Processor Type due to windows being a tool! i read somewhere that i could use the WMI to fix this issue plus get more outta the windows machine dos anyone have a guide or instructions how to setup the WMI correctly to identify things for observium? Regards Simon

4 4

How to add SNMP support in observium for ambient Temperature
by observium＠willfahrt.net 06 Aug '14

06 Aug '14

Hi all, I hope someone can help, I'm sure this has been answered before? - Sorry in advance! I want to monitor a few Linux machines with ambient temperature sensing devices. The NetSNMPd Client Configuration is working and I get a successful response as you can see: ~# snmpget -v 2c temphost -c public .1.3.6.1.2.1.25.1.10 HOST-RESOURCES-MIB::hrSystem.9 = Gauge32: 23000 How can I modify the host configuration to add the ambient Temperature information in the Observium? Best regards, Jens

3 5

ifLastChange usage query
by Peter Childs 06 Aug '14

06 Aug '14

Looking at an operational issue where we had a small interface flap between polls, so link state between polls hasn't changed, but iFLastChange has. Looking at the 'data' view through the UI for the port ifLastChanged doesn't appeared to have changed, and looking through the poller code it appears perhaps it is only updated on a change of operational/admin status on a port? Would there be any use in poller updating it in the db if it was different to the existing value in the port cache ? It would be interesting to be able to alert on 'ifLastChange' < 'some value' .. Or just have the update in the EventLog so when having a look-see at a device it is apparent that a link flap has occurred. A visual indicator in ports basic/detailed view for 'last change' < 'some global config value' like a little exclamation mark or something potentially could be useful to operators to 'spot' issues. Imagine being able to view ports, sort on 'LastChange' during an incident to 'spot' potential causes of issues? Would any of this make sense to anyone? Cheers, Peter

3 2

FW: Cannot Add Device in WUI
by Md. Anamul Haque Rana 06 Aug '14

06 Aug '14

Dear Concern, I can add device in command mode in observium but can not add device in WUI. The error I found is give bellow: Could not ping DBBL-SM-DC-PeriFW-Bdcom. 2014-08-05 17:55:32 | PING ERROR: DBBL-SM-DC-PeriFW-Bdcom (1) | FPING OUT: (null): can't create socket (must run as root?) : Permission denied 2014-08-05 17:55:32 | PING ERROR: DBBL-SM-DC-PeriFW-Bdcom (2) | FPING OUT: (null): can't create socket (must run as root?) : Permission denied 2014-08-05 17:55:32 | PING ERROR: DBBL-SM-DC-PeriFW-Bdcom (3) | FPING OUT: (null): can't create socket (must run as root?) : Permission denied Please help me BR\\ Md. Anamul Haque Rana Officer, ITOD Dutch Bangla Bank Limited IP Phone: +88 09666322017, Ex-221

3 3

Allied Telesis Support
by Patrick Gawthorne 05 Aug '14

05 Aug '14

Hi All, Currently playing with Observium which is brilliant, except when an Allied Telesis switch (running Alliedware Plus) is discovered only basic info is retrieved (Uptime, OS, location, etc), which then causes the issue of halting auto discovery.. The specific model is an AT-9000/28SP. Anyone aware if this switch is supported or not? Cheers, Pat This email, together with any attachments, is intended for the named recipient(s) only and may contain privileged and confidential information. If received in error, please inform the sender as quickly as possible and delete this email and any copies from your computer network. If not an intended recipient of this email, you must not copy, distribute or rely on it, and any form of disclosure, modification, distribution and/or publication of this email is prohibited. Unless stated otherwise, this email represents only the views of the sender and not the views of Pacific Lutheran College.

1 0

question about cisco switch discovery/polling
by Steve Dubinskiy 05 Aug '14

05 Aug '14

we've got a Cisco WS-C4510R+E switch after discovering and polling it,, it now shows 3 entries for each port 1 is the expected/desired one "64-bit" port and 2 unknown/undesired "Controlled" and "Uncontrolled" 32-bit ports. question why are we seeing them ? how to we get rid of them ? this is making management of this device painfully slow .. takes more then 30 seconds (closer to one minute) for the page to load thanks -Steve -- *This message and any files or text attached to it are intended only for the recipients named above, and contain information that is confidential or privileged. If you are not an intended recipient, you must not read, copy, use or disclose this communication. Please also notify the sender by replying to this message, and then delete all copies of it from your system. *

3 4

Re: [Observium] IPMI setup
by Christian Gerbrandt 05 Aug '14

05 Aug '14

You still need SNMP to poll the device. Once added you can configure IPMI to gather stats from IPMI. On Aug 05, 2014, at 02:35 PM, Matthew Green <mephi(a)mephi.co.uk> wrote: Hi, From the reading I've done it seems that Observium supports IPMI and I've got a Supermicro motherboard I'd like to get stats from. However, I can't see any way to configure the device, if I try to add devices it only lets me poll over SNMP, which the Supermicro board doesn't seem to allow. Other than stating that you need IPMItools installed, the Observium documentation doesn't provide any details about how IPMI devices should be configured. Can anyone point me in the right direction? Cheers, Matt _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Discoverying and polling VRF, OSPF and BGP Processes on Nexus 7K : where to start coding
by Mathieu MILLET 05 Aug '14

05 Aug '14

Hi, I would like to give a try to code some PHP Patchs, so that Observium can discover VRF, OSPF, BGP and so on Nexus 7K platform (our reference will be Nexus 7700 with NX-OS 6.2). We are implementing "VRF-Lite" style (no MPLS), so according to Cisco documentation, it is mandatory to map in NX-OS configuration, a SNMP Context (v3) to each instance of VRF, OSPF, BGP, whatever .... My try will be to first discover the context mapping with this Cisco MIB : CISCO-CONTEXT-MAPPING-MIB.my and then to iterate on these mappings using an additional function like "get snmp walk/bulk with context" on these contexts. Do you have any advice how I could do that ? Which files should I implement / pacth ? Which files could I use as examples and inspiration ? Also, I plan to make patch against the last open release (SVN revision 5229). Is that a problem ? Thank you in advance for your help, Sincerely yours, Mathieu. -- Mathieu MILLET mailto:obs@htam.net

1 1

Cisco Active PPP Sessions
by tromp wezelman 05 Aug '14

05 Aug '14

Hi, With the following OID is it possible to show the active PPP sessions: 1.3.6.1.4.1.9.9.150.1.1.1.0 Is it possible to add/make a graph with the active PPP sessions when using cisco equipment like ASR1002 Example: root@observium:/opt/observium# snmpwalk -v2c -On -c noc devicename .1.3.6.1.4.1.9.9.150.1.1.1 .1.3.6.1.4.1.9.9.150.1.1.1.0 = Gauge32: 7545 Perhaps just as the following topic: http://forums.cacti.net/about37860.html Thanks, Tromp

1 1

1 minute bandwidth graphs
by Anthony Polselli 05 Aug '14

05 Aug '14

If I change crontab to pull every 1 minute, can I drill-down tighter on a graph? [cid:image001.jpg@01CFB00A.54AA6B50] __________________________________________ Anthony Polselli, Chief Technology Officer Natural Networks, Inc. 10225 Barnes Canyon Rd. Suite A105 San Diego, CA 92121 anthony(a)naturalnetworks.com<mailto:anthony@naturalnetworks.com> http://www.naturalnetworks.com<http://www.naturalnetworks.com/> (619) 222-3232 office (858) 202-0301 fax

2 1

adjusting bandwidth graphs to what the client is paying for
by Anthony Polselli 04 Aug '14

04 Aug '14

Hi, Just checking out the software for the first time and really liking it. We are using PRTG now and of the things we like about it is per interface we are monitoring, we can set the max x-axis value. It helps our tech's to know what speed Internet connection a client is paying for. We will hand off a 100Mbps interface to the client, but if they are only paying for 20Mbps, we will shape the traffic down to 20Mbps on the router. When you look at the percent graph in Observium, it's based on a 100Mbps max possible speed instead of 20Mbps. Thanks!

3 6

Cannot Add Device
by Josh Hopper 04 Aug '14

04 Aug '14

I'm having an issue adding a new switch to Observium. It is a Dell PowerConnect. administrator@network-monitoring:/opt/observium$ ./discovery.php -h core-sw-tx-01.purafilter2000.com monitor v2c Observium v0.14.8.5732 Discovery Current Revision : 5732 New Revision : 5734 WARNING: 0 devices discovered. Did you specify a device that does not exist? MySQL: Cell[0/0s] Row[20/0s] Rows[2/0s] Column[0/0s] Update[0/0s] Insert[0/0s] Delete[0/0s] However, the switch is live.... User Name:admin Password:******** core-sw-tx-01> en Password: Password:******** core-sw-tx-01# core-sw-tx-01# sh run port jumbo-frame vlan database vlan 200 exit voice vlan oui-table add 000181 Nortel__________________ voice vlan oui-table add 0001e3 Siemens_AG_phone________ voice vlan oui-table add 00036b Cisco_phone_____________ voice vlan oui-table add 00096e Avaya___________________ voice vlan oui-table add 000fe2 H3C_Aolynk______________ voice vlan oui-table add 001049 Shoretel________________ voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone voice vlan oui-table add 00907a Polycom/Veritel_phone___ voice vlan oui-table add 00e0bb 3Com_phone______________ port-channel load-balance src-dst-ip iscsi target port 860 address 0.0.0.0 iscsi target port 3260 address 0.0.0.0 iscsi target port 9876 address 0.0.0.0 iscsi target port 20002 address 0.0.0.0 iscsi target port 20003 address 0.0.0.0 iscsi target port 25555 address 0.0.0.0 iscsi enable hostname core-sw-tx-01 line telnet password ddcf8cf8c5849d6b72e1142f3694881bc39d1560 encrypted exit enable password level 15 encrypted ddcf8cf8c5849d6b72e1142f3694881bc39d1560 username admin password encrypted ddcf8cf8c5849d6b72e1142f3694881bc39d1560 snmp-server community monitor rw 192.168.40.114 view Default sntp server 192.168.40.24 poll ! And I setup the DNS as well.... Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\jhopper>ping core-sw-tx-01 Pinging core-sw-tx-01.purafilter2000.com [192.168.60.2] with 32 bytes of data: Reply from 192.168.60.2: bytes=32 time=53ms TTL=54 Reply from 192.168.60.2: bytes=32 time=53ms TTL=54 Reply from 192.168.60.2: bytes=32 time=52ms TTL=54 Reply from 192.168.60.2: bytes=32 time=52ms TTL=54 Ping statistics for 192.168.60.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 52ms, Maximum = 53ms, Average = 52ms C:\Users\jhopper>nslookup core-sw-tx-01 Server: gpsvr03.homeimpressions.local Address: 192.168.1.20 Name: core-sw-tx-01.purafilter2000.com Address: 192.168.60.2 C:\Users\jhopper> Anyone know why? :/ -- Sincerely, Joshua Hopper, A+ CE Network Administrator [cid:image001.jpg@01CFB00C.28668FE0] 420 3rd Ave NW Hickory NC 28601 Office: 828-449-1839x2160 | Cell: 828-855-7565 Protect Plus Air Holdings, LLC and Affiliates, Protect Plus, LLC and Affiliates, Imagine One Resources, LLC and Affiliates, Protect Plus Surfaces, LLC and Affiliates Confidentiality Notice: This e-mail is intended only for the addressee named above. It contains information that is privileged, confidential or otherwise protected from use and disclosure. If you are not the intended recipient, you are hereby notified that any review, disclosure, copying, or dissemination of this transmission, or taking of any action in reliance on its contents, or other use is strictly prohibited. If you have received this transmission in error, please reply to the sender listed above immediately and permanently delete this message from your inbox. Thank you for your cooperation.

2 2

delete old lmsensors
by Simon Smith 04 Aug '14

04 Aug '14

Hi All, i know this is probably a stupid question, but how do i delete sensors from within the panel and not on the server itself im monitoring? for some reason the observium has detected lmsensors fanspeed sensors about 4 times over? and im not sure if its the server at fault or observium at fault, so i was just going to delete the old fanspeed sensors ? i have attached some screenshots if people don’t understand what im talking about Regards Simon

2 4

Using PHP Weathermap with Observium
by Markus Klock 03 Aug '14

03 Aug '14

Hello! We are migrating from Cacti to Observium and it was a great experience, the only thing we lacked were the weathermap plugin for getting that nice network overview. I then found that Neil Lathwood wrote a modified version of the PHP Weathermap that works with Observium data, you can find it on his github: https://github.com/laf/weathermap I wrote a quick and dirty script that adds the weathermaps to the Observium menu without modifying Observium-code so that it will not break when updating Observium. It works really well so I wrote a little guide for how you get the weathermap to work with Observium and posted it here: http://blog.best-practice.se/2014/07/using-php-weathermap-with-observium.ht… In case there are more people interested in using the weathermap with Observium :) /Markus

11 27

Simple API calls fail
by Mark Price 01 Aug '14

01 Aug '14

Hello list, After an upgrade recently, our Simple API calls have been failing. I just updated to latest svn 0.14.8.5732 and here is what I am seeing: sample api call: wget -O - " http://myserver/api.php?username=myuser&password=mypass&module=bandwidth&po… " which returns: HTTP request sent, awaiting response... 500 Internal Server Error When adding debug=1 option, I get a lot of output which I have pasted here: http://pastie.org/private/zulxpk1n4viyyymxw89wjg The relevant bit seems to be: Fatal error: Call to undefined function humanize_device() in /opt/observium/includes/common.inc.php on line 964 Any tips for how to debug this? Best, Mark

1 0

PPPoE ports not displaying in Observium Discovery
by Greg Lipschitz 31 Jul '14

31 Jul '14

Hi All, We are seeing an interesting issue when looking at a Mikrotik Routerboard (RB951 MikroTik RouterOS 6.13) When performing an snmpwalk of the device, we see the pppoe client interfaces (counters, gauges, timers etc) as expected. When we perform a Observium discovery of the device, it seems to be counting the 13 interfaces, but shows “XX” for the 2 PPPoE client interfaces. Output of the CPE and Discover & Poller below. List of Interfaces === Flags: D - dynamic, X - disabled, R - running, S - slave # NAME TYPE MTU L2MTU MAX-L2MTU 0 R ;;; Cust: Gale Insurance [25Mbit] (25/10 NBN NTD000006105558) {GALE-C... ether1 ether 1500 1598 4074 1 R ;;; Cust: Gale Insurance [20Mbit] (Telstra Internet Direct ADSL) {GAL... ether2 ether 1500 1598 4074 2 X ;;; LAN - Trunk Interface ether3 ether 1500 1598 4074 3 RS ;;; LAN - DATA subnet, untagged ether4 ether 1500 1598 4074 4 XS ;;; LAN - VoIP subnet, untagged ether5 ether 1500 1598 4074 5 X wlan1 wlan 1500 2290 6 R bridge1-data bridge 1500 1598 7 R bridge2-voip bridge 1500 1598 8 R lo0 bridge 1500 65535 9 R ;;; PPPoE for FTTx Service pppoe-FTTx pppoe-out 1480 10 R ;;; PPPoE for xDSL Service pppoe-xDSL pppoe-out 1500 11 XS ;;; DATA subnet, tagged Discovery Output === Observium v0.14.7.5731 Discovery Current Revision : 5731 New Revision : 5731 103.253.92.23.rdns.zone 3 routeros Ports : ..........XX. Port Stacks: Processors : hrDevice: .. Memory : HOST-RESOURCES-MIB . IPv4 Addresses : .. IPv6 Addresses : Sensors: MIKROTIK-MIB ENTITY-SENSOR-MIB Storage : HOST-RESOURCES-MIB: . Inventory: Physical Inventory : .. hrDevice : . MIKROTIK-MIB . Discovery protocols: LLDP-MIB CISCO-CDP-MIB OSPF Neighbours: ARP/NDP Tables : BGP Sessions: No BGP on host VLANs: Q-BRIDGE-MIB UCD Disk IO : Discovered in 9.473 seconds Poller Output === Observium v0.14.7.5731 Poller Starting polling run: 103.253.92.23.rdns.zone 3 routeros Module [ unix-agent ] disabled globally. Module [ ipmi ] excluded for device. Module [ junose-atm-vp ] excluded for device. Module [ cisco-ipsec-flow-monitor ] excluded for device. Module [ cisco-remote-access-monitor ] excluded for device. Module [ cisco-cef ] excluded for device. Module [ cisco-sla ] excluded for device. Module [ arista-software-ip-forwarding ] excluded for device. Module [ cipsec-tunnels ] excluded for device. Module [ cisco-ace-loadbalancer ] excluded for device. Module [ cisco-ace-serverfarms ] excluded for device. Module [ cisco-cbqos ] excluded for device. Module [ cisco-eigrp ] excluded for device. Module [ netscaler-vsvr ] excluded for device. Module [ aruba-controller ] excluded for device. Module [ cisco-vpdn ] disabled globally. Module [ wmi ] disabled globally. Uptime: 21 days, 22h 56m 46s Module time: 0.8838s Hardware: RB951G-2HnD Version: 6.13 Features: Level 4 Serial: Asset: Module time: 0.2185s Module time: 0.0011s Processor Processor 6% Checking alerts Processor Average 6% Checking alerts Module time: 1.5665s Mempool main memory: 22.59% Checking alerts Module time: 0.706s Storage disk: system: 12.98% Checking alerts Module time: 0.4528s Netstats: Module time: 0.3009s HR Stats: Module time: 0.0517s Module time: 0.2457s Polling IP-MIB ipSystemStats Module time: 0.096s Caching Oids: ifEntry ifXEntry dot3StatsDuplexStatus Port ether1(1) replacing with 64-bit...VLAN == bps(25.2kbps/107kbps)bytes(166kB/711kB)pkts(22.3pps/25.2pps) Checking alerts Port ether2(2) replacing with 64-bit...VLAN == bps(1.69kbps/73bps)bytes(11.1kB/494B)pkts(0.61pps/74.0mpps) Checking alerts Port ether3(3) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts Port ether4(4) replacing with 64-bit...VLAN == bps(11.7kbps/8.06kbps)bytes(77.5kB/53.0kB)pkts(12.4pps/4.06pps) Checking alerts Port ether5(5) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts Port wlan1(6) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts Port bridge1-data(9) replacing with 64-bit...VLAN == bps(9.5kbps/7.57kbps)bytes(62.6kB/49.8kB)pkts(12.4pps/3.57pps) Checking alerts Port bridge2-voip(10) replacing with 64-bit...VLAN == bps(0bps/39bps)bytes(0B/263B)pkts(0pps/37.0mpps) Checking alerts Port vlan10-data(11) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts Port vlan20-voice(12) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts Port lo0(17) replacing with 64-bit...VLAN == bps(0bps/34bps)bytes(0B/232B)pkts(0pps/37.0mpps) Checking alerts Module time: 14.5479s BGP Peers: Module time: 0.0452s Module time: 0.0011s Module time: 0.0007s Wireless: Module time: 0.0017s OSPF: Processes: Areas: Ports: Neighbours: Module time: 0.093s Mac Accounting: Caching DB...0 entries. Module time: 0.0019s Entity Physical: Module time: 0.0008s Module time: 0.0005s FDB Tables Module time: 0.1898s Module time: 0.0006s ping ping_snmp uptime processor mempool storage fdb_count poller_perf Polled in 20.0717 seconds UPDATED! Greg Lipschitz Director Summit IT Management<http://www.thesummitgroup.com.au> | Summit Internet<http://www.summitinternet.com.au> | Summit Creative<http://www.summitcreative.com.au> - ‘reach your peak’ Divisions of The Summit Group (Australia) Pty Ltd Phone (Australia): 1300 049 749 Phone (US & Canada): (321) 216 3844 E-mail: Greg(a)thesummitgroup.com.au<mailto:Greg@thesummitgroup.com.au> Internet: http://www.thesummitgroup.com.au/<http://www.thesummitgroup.com.au> Address: Level 1, 39 Railway Road, Blackburn VIC 3130 Postal: P.O. Box 3225, Doncaster East VIC 3109 Follow us on Facebook<http://www.facebook.com/thesummitgroup/> | LinkedIn<http://www.linkedin.com/company/1942329> | Twitter<http://twitter.com/summitgroupau/> -- ExchangeDefender Message Security: Click below to verify authenticity https://admin.exchangedefender.com/verify.php?id=s713NcPw013883&from=greg@t…

1 1

Temperature notifications
by Anton Voloshin 29 Jul '14

29 Jul '14

Hi all. I've enabled e-mail notifications in the configuration file (commercial version). How do I disable, for example, temperature notifications? They are very annoying while not important in my case. Best regards, Anton Voloshin IT Systems Engineer Group-IB +7 495 984 3364 +7 925 060 6896 voloshin(a)group-ib.com www.group-ib.com

3 3

observium portal slow
by Kiru Pananthan 28 Jul '14

28 Jul '14

Dear all our observium portal very slow in responding which is loading the page and refresh also. any suggestion thank you kiru -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

3 2

Re: [Observium] observium Digest, Vol 48, Issue 135
by Kiru Pananthan 28 Jul '14

28 Jul '14

Hi Josh below are the details Disk /dev/sda: 107.4 GB, 107374182400 bytes 255 heads, 63 sectors/track, 13054 cylinders, total 209715200 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0000342b Device Boot Start End Blocks Id System /dev/sda1 * 2048 201332735 100665344 83 Linux /dev/sda2 201334782 209713151 4189185 5 Extended /dev/sda5 201334784 209713151 4189184 82 Linux swap / Solaris -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

1 0

Re: [Observium] observium Digest, Vol 48, Issue 134
by Kiru Pananthan 28 Jul '14

28 Jul '14

Hi Josh you need the resource and other information of our observium server or the server we monitor using observium -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

2 1

Re: [Observium] observium Digest, Vol 48, Issue 134
by Kiru Pananthan 28 Jul '14

28 Jul '14

Hi Josh -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

1 0

Re: [Observium] observium Digest, Vol 48, Issue 133
by Kiru Pananthan 28 Jul '14

28 Jul '14

Hi Josh How many devices do you have? 89 device What are your VM/PCs resources? Hyper VM and Vmware Vm What OS? windows server 2008 / debian linux What SWAP? sorry no idea on this On Mon, Jul 28, 2014 at 10:10 PM, <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. observium portal slow (Kiru Pananthan) > 2. Re: observium portal slow (Josh Hopper) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 28 Jul 2014 22:04:49 +0800 > From: Kiru Pananthan <kirup(a)aism.edu.my> > To: "observium(a)observium.org" <observium(a)observium.org> > Subject: [Observium] observium portal slow > Message-ID: > <CAEax4xXKRktFwpq9SpsopS8CH_o0t1b2TFV9+OvO= > j06YGUS0g(a)mail.gmail.com> > Content-Type: text/plain; charset="us-ascii" > > Dear all > > our observium portal very slow in responding which is loading the page and > refresh also. any suggestion > > thank you > kiru > > -- > *Confidentiality Disclaimer:* This e-mail and any attachments are > confidential and intended solely for the intended addressee and may also be > privileged or exempt from disclosure under applicable law. If you are not > the intended addressee, or have received this e-mail in error, please > notify the sender immediately, delete it from your system and do not copy, > disclose, distribute or otherwise act in reliance upon any part of this > e-mail or its attachments. Australian International School Malaysia and all > affiliates under Taylor's Education Group does not accept responsibility > for any loss arising from unauthorised access to, or interference with, any > internet communications by any third party in reliance to this email, or > from the transmission of any viruses. Please note that any views or > opinions presented in this email are solely those of the author and do not > necessarily represent those of Australian International School Malaysia > and > all affiliates under Taylor's Education Group. Replies to this e-mail may > be monitored by Australian International School Malaysia and all > affiliates under Taylor's Education Group for operational or business > reasons. >

2 1

Host down alert
by Anton Voloshin 28 Jul '14

28 Jul '14

Hi there. Is it possible yet (in commercial version) to set up a "host down" alert? If yes, how to implement it? Couldn't find out from current documentation. [image: Group-IB] Global Cyber Security Company <http://www.facebook.com/GroupIB> <http://twitter.com/groupib> <http://www.linkedin.com/groups/GroupIB-Cybercrime-Cyberterrorism-4390171> <http://www.youtube.com/user/GroupIB>Best regards, Anton Voloshin IT Systems Engineer Group-IB +7 495 984 3364 +7 925 060 6896 voloshin(a)group-ib.com www.group-ib.com Print this mail only if absolutely necessary. Save Paper. Save Trees. This communication is confidential and may be legally privileged. If you believe you are not an intended recipient, please inform the sender, delete the e-mail and do not copy, print or use it or disclose it to others. You can inform the sender by replying to this e-mail or by telephone (+7 495 984 3364). If this email has any files attached to it, they should be virus-checked before they are opened.

2 1

observium.mynetwork.com/syslog dates and times messed up
by Rob Townley 27 Jul '14

27 Jul '14

On the /syslog page, i found out my NetGear switches existed in the year 1. For instance, the dates start with `-0001-11-30 00:00:00`. -0001-11-30 00:00:00 storageswitch <http://observium.corp.eceo.us/device/device=2/tab=logs/section=syslog/> Informational (6) *10.0.100.17%AAA-I-DISCONNECT* : http connection for user admin, source 10.0.100.50 destination 10.0.100.17 TERMINATED -0001-11-30 00:00:00 storageswitch <http://observium.corp.eceo.us/device/device=2/tab=logs/section=syslog/> Informational (6) *10.0.100.17%SYSLOG-I-NEWRADIUSSE* : configure new syslog radius server 10.0.100.10 -0001-11-30 00:00:00 storageswitch <http://observium.corp.eceo.us/device/device=2/tab=logs/section=syslog/> Informational (6) *10.0.100.17%SYSLOG-I-NEWRADIUSSE* : configure new syslog radius server 10.0.100.10

1 0

Geocode
by Josh Hopper 27 Jul '14

27 Jul '14

I wanted to test out Geocoding with Google instead of the regular locations. $config['geocoding']['default']['lat'] = "35.922614"; // Default latitude $config['geocoding']['default']['lon'] = "-81.542729"; // Default longitude $config['location_menu_geocoded'] = TRUE; // Build location menu with geocoded data. $config['geocoding']['enable'] = TRUE; // Enable Geocoding If I have SNMP Locations set on my devices does it prevent this from working? Or, is there a particular way to tell if its operating correctly? -- Sincerely, Joshua Hopper, A+ CE Network Administrator 420 3rd Ave NW Hickory NC 28601 Office: 828-449-1839x2160 | Cell: 828-855-7565 Protect Plus Air Holdings, LLC and Affiliates, Protect Plus, LLC and Affiliates, Imagine One Resources, LLC and Affiliates, Protect Plus Surfaces, LLC and Affiliates Confidentiality Notice: This e-mail is intended only for the addressee named above. It contains information that is privileged, confidential or otherwise protected from use and disclosure. If you are not the intended recipient, you are hereby notified that any review, disclosure, copying, or dissemination of this transmission, or taking of any action in reliance on its contents, or other use is strictly prohibited. If you have received this transmission in error, please reply to the sender listed above immediately and permanently delete this message from your inbox. Thank you for your cooperation.

2 1

Checks failed (Suppressed: ENTITY)
by Thomas Raabo - Zitcom A/S 26 Jul '14

26 Jul '14

What does this message mean? [cid:image002.png@01CFA8BD.12BAC8B0] Some ports just stay check failed. [cid:image003.png@01CFA8BD.12BAC8B0] What did I do wrong? :) Thomas

3 2

Remote syslog to Observium
by Eduardo Schoedler 25 Jul '14

25 Jul '14

I have forgot one device with remote syslog with debug enabled. My syslog table is with 12G, so I had to truncated :). Any chances to implement regexp filter (like bad_if_regexp) to syslog too? Thanks all! -- Eduardo Schoedler

4 4

Adding a Group to user profile
by Andres Pugawko 25 Jul '14

25 Jul '14

Hello Guys! It is posible to add a Port Group to a "Normal User" profile ?? Regards Andres Pugawko Network Engineer

1 0

Better poller for Observium
by Alex Povolotsky 24 Jul '14

24 Jul '14

Hello While Observium has a nice interface, it's database lacks foreign keys a lot, and poller.php is AWFUL. It's slow and unreadable. I've started a new, about 40-50 times lighter observium poller https://github.com/tarkhil/observium-poller It supports only SNMP for now, and is work-in-progress. Only os, processor and memory modules are working, and ports is about 50% finished. If anyone is interested, please join. I'm sure to complete SNMP support for Cisco, but quite unsure if I'll be interested in implementing much else. Alex

8 17

Interesting experiment with poll over SSH
by Peter Childs 24 Jul '14

24 Jul '14

We have a host about 320ms from our observium node (yes.. The other side of the planet). Doing a full poll circa 650-700ms (including mac and bgp tables... Its a IOS-XR ASR9K ..). Adjusting the Cr/max-reps did increase speeds, and caused several nasty snmpd explosions on the chassis. As a exercise in interest I spun up a VM much closer to the host, unpacked /opt/observium/mibs etc and configured snmp on that remote host. Then did this root@obs1:/opt/observium# diff -c includes/snmp.inc.php.orig includes/snmp.inc.php *** includes/snmp.inc.php.orig 2014-07-23 17:43:53.720274321 +0930 --- includes/snmp.inc.php 2014-07-23 17:56:23.092286235 +0930 *************** *** 333,338 **** --- 333,345 ---- // Add the OID(s) to the strong $cmd .= " ".$oids; + if( $device['hostname'] == 'faraway.router.com' ){ + $cmd = "ssh -i ~x/x.pem x@remote-poller-node -C " . escapeshellarg($cmd) ; + } This was interesting, but the ssh establishment phase for each snmp execution was a lot of overhead.. So I also did this root@obs1:/opt/observium# cat ~/.ssh/config Host remote-poller-node # HostName machine1.example.org ControlPath ~/.ssh/controlmasters/%r@%h:%p ControlMaster auto ControlPersist 10m This means that a ssh 'master instance' was setup at the start of the poll, and hangs around in the background between executions of various snmpcmd's during the poll. Full poll went from 650-700ms -> ~170ms Thought this might be of interest to some people. Cheers, Peter

4 7

Alert checks with load average ?
by Xavier Beaudouin 23 Jul '14

23 Jul '14

Dear Observium gurus, Do you know if it is possible to make alert uppon load average (1minutes) like for example if load average if > 5.0 (this is a random value, but here is an idea). Kind regards, Xavier -- Xavier Beaudouin - Senior Network and System Administrator Infrastructure and network director Horizon Software - http://www.hsoftware.com/ 13 rue La Fayette - 75009 PARIS - France Phone: +33 (0)1 4260 9490 Fax: +33 (0)1 44 56 97 01

2 1

About Vmware / Observium
by Paolo De Michele 23 Jul '14

23 Jul '14

hi guys, I have a problem with a machine via vmware (esxi 5.1) because I can't be able to modify the locality to setup the correct point into the world map in the world map the point result completely wrong I have other machines via gnu/linux and it works perfectly in the snmp options I cannot setup the locality somebody has had an issue like that? thanks in advance, regards

5 6

Stop Email Alerts
by Kiru Pananthan 23 Jul '14

23 Jul '14

Dear all new to observium, how do we stop the email alerts from observium to our email account setup earlier, we are getting an device up/down alerts every 5 minutes for all our windows virtual machines and network devices. thanks kiru -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

2 1

[SOLVED] Housekeeping not deleting records if you have a stupid number to kill.
by Crozier, Doug 23 Jul '14

23 Jul '14

I have a rather old and crufty installation of Observium (now at 5668) with over 70 million syslog, eventlog, and timing records that are older than 7 days. The first time I ran housekeeping -s to trim syslog messages it took about 30 minutes to return showing 42 million records. Just to be sure I was actually done deleting 42 million records, I re-ran the command. The same 42 million records were found. Meh. I ran the housekeeping in debug mode and noticed that I didn't have posix support installed. So I installed the php-process package and tried again. Still no records deleted. I tried deleting fewer records by keeping 18 months worth and that didn't help either. Here's the debug output from attempting to delete records older than 7 days: [root@xxx ~]# php /opt/observium/housekeeping.php -s -d DEBUG! SQL[SELECT COUNT(*) FROM `syslog` WHERE UNIX_TIMESTAMP(`timestamp`) < 1405322208;] 42123350 syslog entries from before 2014-07-14 15:16:48 will be deleted [y/N]: y SQL[DELETE FROM `syslog` WHERE UNIX_TIMESTAMP(`timestamp`) < 1405322208;] Syslog housekeeping: deleted entries Deleting the eventlog records also fails to remove the records: [root@xxxx observium]# php housekeeping.php -e -d DEBUG! SQL[SELECT COUNT(*) FROM `eventlog` WHERE UNIX_TIMESTAMP(`timestamp`) < 1380059875;] 29289378 eventlog entries from before 2013-09-25 05:57:55 will be deleted [y/N]: y SQL[DELETE FROM `eventlog` WHERE UNIX_TIMESTAMP(`timestamp`) < 1380059875] Event log housekeeping: deleted entries (As an aside, I'm not sure, but there may be a semi-colon missing on the delete statement for event log records.) What I eventually found was that trying to delete this many records exhausts the lock table (?). ERROR 1206 (HY000): The total number of locks exceeds the lock table size Issuing the same command from the mysql CLI and adding a 10,000,000 limit allowed the deletion to work correctly mysql> SELECT COUNT(*) FROM `eventlog` WHERE UNIX_TIMESTAMP(`timestamp`) < 1380059875; +----------+ | COUNT(*) | +----------+ | 28177378 | +----------+ 1 row in set (51.76 sec) mysql> DELETE FROM `eventlog` WHERE UNIX_TIMESTAMP(`timestamp`) < 1380059875 LIMIT 10000000; Query OK, 10000000 rows affected (3 min 40.32 sec) mysql> SELECT COUNT(*) FROM `eventlog` WHERE UNIX_TIMESTAMP(`timestamp`) < 1380059875; +----------+ | COUNT(*) | +----------+ | 18177378 | +----------+ 1 row in set (37.01 sec) Interesting to note that deleting 10 million records at a time with the LIMIT statement doesn't always work. Adjusting the LIMIT up and down eventually got me where I was going. Now that I have it the system down to a reasonable number of records, a nightly/weekly cron job should do just fine. Thanks for the effort you put into this Tom. For me, this was like a hardware upgrade.

3 2

About PPPOE / VPDN
by Paolo Giustiniani 23 Jul '14

23 Jul '14

I would like to monitor several interfaces pppoe connections. I enabled the feature and vpdn pppoe # $ config ['bad_if'] [] = "pppoe-"; $ config ['poller_modules'] ['cisco-vpdn'] = 1; The process of self discovery did not detect it. The command show vpdn order properly connections. How can I do?

5 18

Re: [Observium] observium Digest, Vol 48, Issue 97
by Kiru Pananthan 22 Jul '14

22 Jul '14

Hi Peter the machine we are polling is windows VM and also getting for the network switches also On Sun, Jul 20, 2014 at 6:55 AM, <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: Device up / Down (Peter Persson) > 2. Does this product have server agents? (Chris Lawrence) > 3. Re: Does this product have server agents? (Adam Armstrong) > 4. Re: About PPPOE / VPDN (Adam Armstrong) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 19 Jul 2014 16:09:56 +0200 > From: Peter Persson <peter.persson(a)bredband2.se> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Device up / Down > Message-ID: > < > CAPwoXysEEEmTBwWxGZFK6NdnsxoAujz40Oy+s8Pj2wbrWcgdPg(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > The machines doesnt respond as requested. > What type of machines are you polling? > > And thank you for your notice that the mail is confidential, I will not > show this mail for anyone! > > > 2014-07-19 2:41 GMT+02:00 Kiru Pananthan <kirup(a)aism.edu.my>: > > > Dear all > > We are getting an alerts message for every five minutes for 5 > > machines. Stating Device up: / Device Down > > > > Thanks > > Kiru > > > > -- > > *Confidentiality Disclaimer:* This e-mail and any attachments are > > confidential and intended solely for the intended addressee and may also > be > > privileged or exempt from disclosure under applicable law. If you are not > > the intended addressee, or have received this e-mail in error, please > > notify the sender immediately, delete it from your system and do not > copy, > > disclose, distribute or otherwise act in reliance upon any part of this > > e-mail or its attachments. Australian International School Malaysia and > all > > affiliates under Taylor's Education Group does not accept responsibility > > for any loss arising from unauthorised access to, or interference with, > any > > internet communications by any third party in reliance to this email, or > > from the transmission of any viruses. Please note that any views or > > opinions presented in this email are solely those of the author and do > not > > necessarily represent those of Australian International School Malaysia > > and > > all affiliates under Taylor's Education Group. Replies to this e-mail may > > be monitored by Australian International School Malaysia and all > > affiliates under Taylor's Education Group for operational or business > > reasons. > > _______________________________________________ > > observium mailing list > > observium(a)observium.org > > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > >

1 0

Meru Networks Controllers + Access Points
by Sean Huggans 21 Jul '14

21 Jul '14

Any chance to have Meru Networks wireless controllers added? Running a model MC1550 managing 11 Aps and would love to be able to pull it in. Sean Huggans I.S. Services Manager Network Operations Engineer Minneola Healthcare shuggans(a)minneolahealthcare.com [image: A+_CE_tiny]

3 2

Login issue. IP works hostname does not?
by Scott Benninger 21 Jul '14

21 Jul '14

I have a strange issue that I cannot resolve. I have a recent install of the community edition on Ubuntu 14.04. Only difference is the sites available directive changes to make it work compared to the official install docs. Everything was working perfectly and I could login via IP, hostname, or FQDN. The server is a VMware VM and I forgot to install the VMware tools so our VMware monitoring software would stop complaining. I installed the tools and rebooted and now I can only login via the IP. If I try via hostname etc the form just clears with no errors. Adding /debug=1/ shows the mysql commands etc but no errors. I have checked all the hostname settings, defaulted the host file, checked the apache and site configs and nothing working. Seems like a php issue to me. Any ideas? Thanks in advance and my apologies if this something simple that I have missed. Scott

4 4

alert checker missing
by Dash Brousseau 19 Jul '14

19 Jul '14

I updated observium thinking I can create alerts based on http://www.observium.org/wiki/Creating_an_Alert_Checker But I don’t have add check on the menu bar Is that only for the professional paid version? Observium CE 0.14.4.5229 Apache 2.2.22 (Ubuntu) PHP 5.4.9-4ubuntu2.4 MySQL 5.5.34-0ubuntu0.13.04.1 SNMP NET-SNMP version: 5.4.3 RRDtool 1.4.7 Dash This message contains information which may be confidential and privileged. Unless you are the intended addressee (or authorized to receive for the intended addressee), you may not use, copy or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by e-mail then delete the message immediately. Francais: http://www.fundserv.com/fr/company/disclaimer<http://www.fundserv.com/francais/legal/disclaimer_email_ib.shtml>

3 2

Does this product have server agents?
by Chris Lawrence 19 Jul '14

19 Jul '14

I work for an MSP and am looking for a solution that has agents that act as collectors/relays to the main server. This networks and devices that need to be monitored are not directly connected on. PRTG has something like this - if that helps you understand what I'm asking about. Chris Lawrence Director of IT, Solutions and Services 888.825.6748 Support 480.663.6322 Direct 480.200.7875 Cell Chris.Lawrence(a)ValorGlobal.com<mailto:Chris.Lawrence@ValorGlobal.com> [cid:image001.png@01CF865C.4CF93F30]<http://valorglobal.com/> CONFIDENTIALITY: This e-mail (including any attachments) may contain confidential, proprietary and privileged information, and unauthorized disclosure or use is prohibited. If you received this e-mail in error, please notify the sender and delete this e-mail from your system.

2 1

Device up / Down
by Kiru Pananthan 19 Jul '14

19 Jul '14

Dear all We are getting an alerts message for every five minutes for 5 machines. Stating Device up: / Device Down Thanks Kiru -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

2 1

Moving obvsevium to a new host
by Ryan, Spencer J. 19 Jul '14

19 Jul '14

Hi All, We are going to migrate our Observium install (paid) to a different VM, same architecture and everything. I ended up pulling down the latest version from SVN, but to move the actual data over do I need to move anything other than the RRD directory, the config file, and the MySQL database? Thanks! -Spencer _______________________________________________________________ NOTICE TO PERSONS SUBJECT TO UNITED STATES TAXATION (MCPS) DISCLOSURE UNDER TREASURY CIRCULAR 230: The United States Federal tax advice, if any, contained in this document and its attachments may not be used or referred to in the promoting, marketing or recommending of any entity, investment plan or arrangement, nor is such advice intended or written to be used, and may not be used, by a taxpayer for the purpose of avoiding Federal tax penalties. _______________________________________________________________

3 3

Housekeeping script
by Tom Laermans 18 Jul '14

18 Jul '14

Hi everyone, Yesterday I committed a housekeeping script to clean up after Observium. If you have a nice number of devices combined with a long running time of Observium, you're sure to have a gigantic database of event log, syslog and performance timing information. Some of you have resorted to periodically truncating tables - fear no more, housekeeping.php is here! You have a choice of specifying either -a for all modules or s, e, r, p and/or t for specific things. Apart from that, there are options in the configuration to set before most of these things actually do anything. What it does: -s Cleans up syslog data, based on the age of the entries. Configured by $config['housekeeping']['syslog']['age'] = 0; // Maximum age of syslog entries in seconds; 0 to disable i.e. 7*86400 for 7 days. -e Cleans up eventlog data, based on the age of the entries. Configured by $config['housekeeping']['eventlog']['age'] = 0; // Maximum age of eventlog entries in seconds; 0 to disable i.e. 30*86400 for 30 days. -r Cleans up RRD files, there are 2 options here: Cleanup of RRD files with a modification time of a certain age. Ports that are gone, sensors that are gone, erroneaously created RRD files due to bugs or hardware changes, etc. Configured by $config['housekeeping']['rrd']['age'] = 0; // Maximum age of unused rrd files in seconds before automatically purging; 0 to disable i.e. 90*86400 for 90 days. Cleanup of invalid RRD files. Requires $config['file'] to be set correctly to the path of the "file" magic utility. Runs over all .rrd files to see if they are identified as RRDTool Databases. They can sometimes get corrupted (0 bytes, half a file) when your disk/ramdrive is full. When they exist, they are not recreated even if they're invalid. Consequently RRDtool refuses to add data into them as they are not valid RRD database files. This scripts deletes any .rrd file not identified as RRDTool. Configured by $config['housekeeping']['rrd']['invalid'] = TRUE; // Delete .rrd files that are not valid RRD files (eg created with a full disk) Note: this defaults to true currently. Handle with care. -p Cleans up deleted ports. You can do this manually by using the purge button in the web interface, but one could probably safely assume if a port has not returned after 30 days it really is gone. Shorter could be useful in your environment, mine is set to 7 days. Configured by $config['housekeeping']['deleted_ports']['age'] = 0; // Maximum age of deleted ports in seconds before automatically purging; 0 to disable i.e. 30*86400 for 30 days. -t: Cleans up perf time information. Observium keeps performance times per module, per device and per run. This quickly accumulates into a giant number of rows in the database. Configured by $config['housekeeping']['timing']['age'] = 0; // Maximum age of timing (discovery and poll time) entries in seconds; 0 to disable i.e. 7*86400 for 7 days. Housekeeping logs into housekeeping.log in the log_dir. (*) I recommend putting this into cron, daily or weekly (yes, even though the age is set in seconds, I don't recommend running it every minute ;), but only after you've run it manually once. It'll take quite a while the first time to clean up large databases. The "check for invalid RRD files" is probably quite I/O heavy. i'll be documenting this on the wiki soonish. (*) log_dir was also added as a new configuration directive, it defaults to ${installdir}/logs which will be created automatically for you if possible. Tom

6 10

alert temp checker
by Benoit Lambert 17 Jul '14

17 Jul '14

Hello again, 6 temp_greater_65<https://syst3092.bellnordiq.net/alert_check/alert_test_id=6/> Temperature is greater than 65 Celsius! sensor_value greater 65 * temperature 69 0/0/0/0/69 6 temp_greater_65<https://syst3092.bellnordiq.net/alert_check/alert_test_id=6/> Temperature is greater than 65 Celsius! sensor_value greater 65 * sensor_class equals temperature 69 0/0/0/0/69 Neither of these seems to work... It's not checking them, can anyone explain why? Any help would be greatly appreciated. :)

1 0

Issue with discovery.php -h all and certain cisco devices
by David Lagace 17 Jul '14

17 Jul '14

Hello, I've run into a problem where the discovery cron seems to error out. I noticed this in checking the polling times where it was at almost 3 days. I ran discovery.php -h all manually from the shell and noticed it would error out to prompt when scanning the same switch everytime. When I put the device causing the issue in ignore it would go through untill it hit another device that errrored it out. If I run it on the host only it also seems to error out: <SNIP> ./discovery.php -h mksc-dob-lab-sw1 Observium v0.14.7.5654 Discovery Current Revision : 5654 New Revision : 5659 mksc-dob-lab-sw1 433 ios (cisco) OLD: ios, NEW: ios --- Ports : ........................................................... Port Stacks: Processors : CISCO-ENTITY-QFP-MIB CISCO-PROCESS-MIB . hrDevice: Memory : CISCO-ENTITY-QFP-MIB CISCO-ENHANCED-MEMPOOL-MIB CISCO-MEMORY-POOL-MIB ... HOST-RESOURCES-MIB IPv4 Addresses : . IPv6 Addresses : Sensors: CISCO-ENTITY-SENSOR-MIB CISCO-ENVMON-MIB .. Fans . ENTITY-SENSOR-MIB Storage : Inventory: Physical Inventory : ............................................................... hrDevice : Discovery protocols: LLDP-MIB CISCO-CDP-MIB .obs@MTPTSMON01:/opt/observium </SNIP> Here with added debug <SNIP> SQL[SELECT * FROM `ports` WHERE `device_id` = '433' AND `ifIndex` = '10101'] SQL[SELECT `device_id` FROM `devices` WHERE `sysName` = 'MKSC-DOB-1A-ASW1.MKSC.CA' OR `hostname` = 'MKSC-DOB-1A-ASW1.MKSC.CA'] SQL[SELECT `port_id` FROM `ports` WHERE (`ifDescr` = 'GigabitEthernet3/0/41' OR `ifName` = 'GigabitEthernet3/0/41') AND `device_id` = '263'] SQL[SELECT * FROM `links` WHERE `local_port_id` = '26157' AND `remote_hostname` = 'MKSC-DOB-1A-ASW1.MKSC.CA' AND `protocol` = 'cdp' AND `remote_port` = 'GigabitEthernet3/0/41'] . SQL[SELECT * FROM `ports` WHERE `device_id` = '433' AND `ifIndex` = '10104'] SQL[SELECT `device_id` FROM `devices` WHERE `sysName` = 'Blee' OR `hostname` = 'Blee'] PHP Fatal error: Call to undefined function nicecase() in /opt/observium/includes/discovery/functions.inc.php on line 151 Fatal error: Call to undefined function nicecase() in /opt/observium/includes/discovery/functions.inc.php on line 151 </SNIP> Anyone seen this issue? Thanks for your help! --Dave

2 1

Barracuda Spam Firewall Support
by Sveatoslav Persianov 17 Jul '14

17 Jul '14

Hello Observium Team, We bought an Observium Pro subscription and found out that Barracuda Spam Firewall devices are not supported. Would you be so kind to give an estimation, when Observium will support these devices, or if you actually plan to add them to supported devices list? Thank you. Best regards, Sveatoslav PERSIANOV Informational Systems Engineer Informational Systems Services Department S.E. Special Telecommunications Center Tel : +373 60 300 591 Email : sveatoslav.persianov(a)cts.md Web : www.cts.md Acest mesaj si orice fisiere atasate acestuia sunt permise spre utilizare doar destinatarului si poate contine informatie cu acces restrictionat. Daca nu sunteti un destinatar sau autorizat in alt mod de a primi acest mesaj, va aducem la cunostinta ca dezvaluirea, copierea sau distribuirea acestui mesaj este strict interzisa si poate fi ilegala. Daca ati primit acest mesaj din greseala, va rugam sa informati imediat IS CTS la adresa de raspuns si sa stergeti acest mesaj din sistem. This e-mail message and any attachments are only for the use of the intended recipient and may contain confidential information. If you are not an addressee or otherwise authorized to receive this message, you are hereby notified that any disclosure, copying or distribution of this message is strictly prohibited and may be unlawful. If you have received this email by mistake, please inform S.E. CTS immediately by reply e-mail and delete this message from your system.

2 1

Ubuntu 14.04 Support?
by William Jimenez 17 Jul '14

17 Jul '14

Hello I am curious if there are any plans at the present to support Ubuntu 14.04. Thanks, William

3 3

Device not yet discovered
by Kiru Pananthan 16 Jul '14

16 Jul '14

Dear all getting error message as below for few machines in observium, how this can be fixed This device has not yet been successfully discovered. System information and statistics will not be populated and graphs will not draw. This device should be automatically discovered within 10 minutes. Thanks Kiru -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

4 3

alert checker email alert
by Gorbachev Anthony 16 Jul '14

16 Jul '14

Hi All, I am not receiving email alerts for the below checks also the alerted status says never and I can't find any documents online for the same. Can anyone please point me in the right direction ? -- Regards, Gorbachev Anthony

6 7

Discovery crashing UPS management card
by Steve Kersley 16 Jul '14

16 Jul '14

Good morning all, I'm a recent adopter of Observium so still finding my feet and slowly learning how best to set it up. However, I have noticed that since installing it, it was reporting that my main UPS management card was rebooting every 6 hours. The UPS is an Eaton 9SX 5000i + battery pack, with Network-MS management card, firmware HF which is the latest available for card tech level 16. Dabbling more, it seems that it's the discovery process that is causing it, specifically when it walks the xupsOutput table (.1.3.6.1.4.1.534.1.4) in the Powerware MIB, the UPS management card immediately stops responding and reboots. It actually appears to be crashing on doing a GetNext on .1.3.6.1.4.1.534.1.4.7.0, which is beyond the defined values in that table. The UPS continues to operate, but the management card stops. This also means that Observium has only managed to discover the 'input' voltage - output, bypass and current/power readings all just read as zero as the card has stopped responding when it tries to read those. The poll runs fine and gets data from the input voltage sensor. Clearly this is not an Observium issue: I can reproduce the reboot with a simple snmpwalk on the commandline, which should be a valid operation on a published MIB. I do have a ticket open with the manufacturer, although the first response was 'does it work with our management software?'. It may even be a fault on my unit, but I don't have more than one of these to test. I'm assuming there's a reason for the discovery module to need to walk the tables rather than just read the specific values - presumably bigger UPS units might have multiple metered AC inputs and outputs rather than just the one? I could disable sensor discovery, which will stop the reboots but that won't let it learn about the additional sensors that it still hasn't found. Unless I can manually insert data into the database for the poller to pick up? Alternatively, is there a way for me to override the detection of a Powerware UPS and use the generic UPS MIB rather than the XUPS MIB? Any other thoughts? Steve.

4 3

Ubuntu 12.04? Does r5229 work on Ubuntu 14.04?
by Rob Townley 15 Jul '14

15 Jul '14

Loving observium, but noticed some issues with it detecting well over 448 ports on a switch that nothing was plugged into except two patch cables but then i just happened to notice php version on Ubuntu 12.04. The Ubuntu installation directions had some conflicting information: Requires php5.4 but Ubuntu 12.04 does not includes php5.3 only. Recommend LTS, but recommend 13.04 which is not LTS. Does not mention 14.04 LTS. The existing community download is from April which provides another reason that Ubuntu 14.04 LTS will not work well since there has not been another release since then. So i am trying to decide to add a PPA for php5.4 or do i upgrade the entire OS to 14.04? Will the April 2014 (SVN# 5229 ) Observium release work just fine on 14.04.

2 2

Large number of ports on switch? Juniper VC/VCF EX/QFX
by Paul Meys 15 Jul '14

15 Jul '14

Hi, I'm running into a problem when trying to view a junipersetup. It is a virtual chassis fabric with 2x QFX51 and 2x EX43 When you open the device, in the list of ports, the last ones don't appear: 2/0/14, ge-2/0/15, ge-2/0/16, ge-2/0/17, ge-2/0/18, ge-2/0/19, ge-2/0/20, ge-2/0/21, ge-2/0/22, ge-2/0/23, ge-2/0/24, ge-2/0/25, ge-2/0/26, ge-2/0/27, ge-2/0/28, ge-2/0/29, ge-2/0/30, ge-2/0/31, ge-2/0/32, ge-2/0/33, ge-2/0/34, ge-2/0/35, ge-2/0/36, ge-2/0/37, ge-2/0/38, ge-2/0/39, ge-2/0/40, ge-2/0/41, ge-2/0/42, ge-2/0/43, ge-2/0/44, ge-2/0/45, ge-2/0/46, ge-2/0/47, ge-2/0/0.0, xe-0/0/0, xe-0/0/2, xe-0/0/0.0, xe-0/0/2.0, xe-0/0/1, xe-0/0/1.0, xe-0/0/3, xe-0/0/3.0, xe-1/0/0, xe-1/0/0.0, xe-1/0/1, xe-1/0/1.0, xe-1/0/2, xe-1/0/2.0, xe-1/0/3, xe-1/0/3.0, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , When I click on "Ports": I have a lot of "empty" rows at the end. I also added a trunk-interface ( ae0 ) with does not appear in the list. Is it possible the QFX/ex4300 is not yet recognised ? I also have a (Juniper) switch with almost 600 ports with almost the same problem. ( 10x EX4200 ) Is there a port-limit ? Thank you Kind regards, Paul Paul Meys Milla-IT - creative minds think alike Berkenrodelei 51 2660 Hoboken-Belgium paul(a)milla-it.be<mailto:paul@milla-it.be> http://www.milla-it.be<http://www.milla-it.be/> BE 0892.650.418 +32 498 62 19 94 IT: Hosting / Security / Network / Consultancy ?

3 3

high CPU / slow response
by Paul Meys 15 Jul '14

15 Jul '14

Hi, I'm running the latest version, but it is extremely slow. Even to load the login-page, it takes a very long time. I always see mysqld using almost all CPU-power. the server is running in vmware, os = debian. Currently I have one v-core assigned with 16G of ram. ( already tried with 4 cores.. ) In Observium I have 75 devices with a total of 7500 ports. Please advice ;-) Thank you, Have a good day, Paul

5 9

Re: [Observium] Observium] Move my monitoring system
by Adam Armstrong 14 Jul '14

14 Jul '14

And don't forget to disable the old server if it auto updates, else the account may get blocked :) Adam. Tom Laermans wrote:

1 0

Move my monitoring system
by Ryan Milton 14 Jul '14

14 Jul '14

Hi, I am having to move my Observium installation to a new server. I have the paid version of Observium, and am basically taking an older version and want to use my existing license. What is the proper path to make this move? Thanks, Ryan

2 3

Observium Capacity for large networks
by Daniel Josue Rodriguez Paiz 13 Jul '14

13 Jul '14

Hello, I'm interested on using Observium Pro to monitoring a large network of 15,000 devices more or less. Does anyone know if observium works fine in a large network? Thanks in advance for your replies.

7 11

Three phase UPS, [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 13 Jul '14

13 Jul '14

Does anyone else have a three phase ups. I was wanting to know if it is using the UPS-MIB and that you've done something to get all three phases shown as graphs ? I've done a debug on the discovery and it is clear that all phases are returned by the bulkwalk statements. so far i've created ./html/images/os/emerson.png and ./includes/polling/os/emerson.inc.php and added to my config.php the following: $os = "emerson"; $config['os'][$os]['text'] = "Emerson UPS"; $config['os'][$os]['type'] = "power"; $config['os'][$os]['over'][0]['graph'] = "device_voltage"; $config['os'][$os]['over'][0]['text'] = "Voltage"; $config['os'][$os]['over'][1]['graph'] = "device_current"; $config['os'][$os]['over'][1]['text'] = "Current"; $config['os'][$os]['over'][2]['graph'] = "device_frequency"; $config['os'][$os]['over'][2]['text'] = "Frequency"; $config['os'][$os]['sysObjectID'][] = ".1.3.6.1.2.1.33"; $config['os'][$os]['mibs'][] = "UPS-MIB"; root@dc3monitor2:/opt/observium# snmpwalk dc6ups01 -v2c -c xxxxx -M /opt/observium/mibs -m UPS-MIB upsMIB UPS-MIB::upsIdentManufacturer.0 = STRING: Chloride UPS-MIB::upsIdentModel.0 = STRING: 80Net UPS-MIB::upsIdentUPSSoftwareVersion.0 = STRING: 10h01517 V4.00.100312 (5135) / 10h01531 V1.10.100326,10h01530 V UPS-MIB::upsIdentAgentSoftwareVersion.0 = STRING: 3.15.3397 UPS-MIB::upsIdentName.0 = STRING: dc6ups01 UPS-MIB::upsIdentAttachedDevices.0 = STRING: none UPS-MIB::upsBatteryStatus.0 = INTEGER: batteryNormal(2) UPS-MIB::upsSecondsOnBattery.0 = INTEGER: 0 seconds UPS-MIB::upsEstimatedMinutesRemaining.0 = INTEGER: 164 minutes UPS-MIB::upsEstimatedChargeRemaining.0 = INTEGER: 100 percent UPS-MIB::upsBatteryVoltage.0 = INTEGER: 5440 0.1 Volt DC UPS-MIB::upsBatteryCurrent.0 = INTEGER: 2 0.1 Amp DC UPS-MIB::upsBatteryTemperature.0 = INTEGER: 19 degrees Centigrade UPS-MIB::upsInputLineBads.0 = Counter32: 56 UPS-MIB::upsInputNumLines.0 = INTEGER: 3 UPS-MIB::upsInputFrequency.1 = INTEGER: 499 0.1 Hertz UPS-MIB::upsInputFrequency.2 = INTEGER: 499 0.1 Hertz UPS-MIB::upsInputFrequency.3 = INTEGER: 499 0.1 Hertz UPS-MIB::upsInputVoltage.1 = INTEGER: 245 RMS Volts UPS-MIB::upsInputVoltage.2 = INTEGER: 245 RMS Volts UPS-MIB::upsInputVoltage.3 = INTEGER: 243 RMS Volts UPS-MIB::upsInputCurrent.1 = INTEGER: 30 0.1 RMS Amp UPS-MIB::upsInputCurrent.2 = INTEGER: 30 0.1 RMS Amp UPS-MIB::upsInputCurrent.3 = INTEGER: 31 0.1 RMS Amp UPS-MIB::upsInputTruePower.1 = INTEGER: 7500 Watts UPS-MIB::upsInputTruePower.2 = INTEGER: 7500 Watts UPS-MIB::upsInputTruePower.3 = INTEGER: 7700 Watts UPS-MIB::upsOutputSource.0 = INTEGER: normal(3) UPS-MIB::upsOutputFrequency.0 = INTEGER: 499 0.1 Hertz UPS-MIB::upsOutputNumLines.0 = INTEGER: 3 UPS-MIB::upsOutputVoltage.1 = INTEGER: 241 RMS Volts UPS-MIB::upsOutputVoltage.2 = INTEGER: 239 RMS Volts UPS-MIB::upsOutputVoltage.3 = INTEGER: 239 RMS Volts UPS-MIB::upsOutputCurrent.1 = INTEGER: 384 0.1 RMS Amp UPS-MIB::upsOutputCurrent.2 = INTEGER: 288 0.1 RMS Amp UPS-MIB::upsOutputCurrent.3 = INTEGER: 328 0.1 RMS Amp UPS-MIB::upsOutputPower.1 = INTEGER: 7900 Watts UPS-MIB::upsOutputPower.2 = INTEGER: 6200 Watts UPS-MIB::upsOutputPower.3 = INTEGER: 7200 Watts UPS-MIB::upsOutputPercentLoad.1 = INTEGER: 27 percent UPS-MIB::upsOutputPercentLoad.2 = INTEGER: 20 percent UPS-MIB::upsOutputPercentLoad.3 = INTEGER: 23 percent UPS-MIB::upsAlarmsPresent.0 = Gauge32: 0 UPS-MIB::upsTestId.0 = OID: UPS-MIB::upsTestNoTestsInitiated UPS-MIB::upsTestSpinLock.0 = INTEGER: 53 UPS-MIB::upsTestResultsSummary.0 = INTEGER: 1082939236 UPS-MIB::upsTestResultsDetail.0 = STRING: UPS-MIB::upsTestStartTime.0 = Timeticks: (0) 0:00:00.00 UPS-MIB::upsTestElapsedTime.0 = Wrong Type (should be INTEGER): Timeticks: (654440200) 75 days, 17:53:22.00 UPS-MIB::upsShutdownType.0 = INTEGER: 0 UPS-MIB::upsShutdownAfterDelay.0 = INTEGER: 0 seconds UPS-MIB::upsStartupAfterDelay.0 = INTEGER: 0 seconds UPS-MIB::upsRebootWithDuration.0 = INTEGER: 0 seconds UPS-MIB::upsAutoRestart.0 = INTEGER: 0 UPS-MIB::upsConfigInputVoltage.0 = INTEGER: 240 RMS Volts UPS-MIB::upsConfigInputFreq.0 = INTEGER: 500 0.1 Hertz UPS-MIB::upsConfigOutputVoltage.0 = INTEGER: 240 RMS Volts UPS-MIB::upsConfigOutputFreq.0 = INTEGER: 500 0.1 Hertz UPS-MIB::upsConfigOutputVA.0 = INTEGER: 99900 Volt-Amps UPS-MIB::upsConfigOutputPower.0 = INTEGER: 90000 Watts UPS-MIB::upsConfigLowBattTime.0 = INTEGER: 0 minutes UPS-MIB::upsConfigAudibleStatus.0 = INTEGER: 0 UPS-MIB::upsConfigLowVoltageTransferPoint.0 = INTEGER: 168 RMS Volts UPS-MIB::upsConfigHighVoltageTransferPoint.0 = INTEGER: 274 RMS Volts thanks Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine(a)familycourt.gov.au ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

3 5

install not quite complete
by Dave Boulter 13 Jul '14

13 Jul '14

Hi, Have the web interface up and running and one device is discovered. When I click on that it says the devices is not found. When I look in the html directory id don't see any devices file or subdirectory, any ideas? -- Dave Boulter TechRemedy o 02 8213 6187 | f 02 8213 6204 | m 0417 705 997 e dave.boulter(a)techremedy.com.au<mailto:dave.boulter@techremedy.com.au> | w www.techremedy.com.au<http://www.techremedy.com.au/>

3 3

OID Questions
by Andrés™ 12 Jul '14

12 Jul '14

Hi, I just installed observium and it's really great. I would like to know if it is posible to add SNR (Signal2Noise) and Cable Modem registered for my Cisco CMTS ubr7225. I have Cacti graphs with these oids: Example: CM count = 1.3.6.1.4.1.9.9.116.1.4.1.1.5.1182 SNR: 1.3.6.1.2.1.10.127.1.1.4.1.5.1182 Thank you in advance.

1 0

About hiding "Same subnet" details for user accounts
by Yavor Buyukliev 11 Jul '14

11 Jul '14

Hi List, is there any way to disable "Same subnet" details on interface for user accounts, or globally for all? I try to set $config['web_show_disabled'] = TRUE; in my config.php, but can't see any change at all. Best regards!

2 6

PowerConnect 5548
by Josh Hopper 11 Jul '14

11 Jul '14

I love the update you guys did in May/June. My PowerConnect 6224 switches have major improvements in what they graph. However, my PowerConnect 5548 switch has a draw error on everything but bandwidth. Is there a way to resolve this? -- Sincerely, Joshua Hopper, A+ CE Network Administrator 420 3rd Ave NW Hickory NC 28601 Office: 828-449-1839x2160 | Cell: 828-855-7565 Protect Plus Air Holdings, LLC and Affiliates, Protect Plus, LLC and Affiliates, Imagine One Resources, LLC and Affiliates, Protect Plus Surfaces, LLC and Affiliates Confidentiality Notice: This e-mail is intended only for the addressee named above. It contains information that is privileged, confidential or otherwise protected from use and disclosure. If you are not the intended recipient, you are hereby notified that any review, disclosure, copying, or dissemination of this transmission, or taking of any action in reliance on its contents, or other use is strictly prohibited. If you have received this transmission in error, please reply to the sender listed above immediately and permanently delete this message from your inbox. Thank you for your cooperation.

3 6

observium alert check for temperature
by Benoit Lambert 10 Jul '14

10 Jul '14

There is nothing in http://pastebin.com/3D9zQcFS about temperature checker. Is the entity temp-CPU/temp-System?

2 1

More Documentation on Alert Checkers?
by Benoit Lambert 10 Jul '14

10 Jul '14

Hi, Is there more documentation on how to setup alert checkers? Maybe there's a list of entities that I can pick from? I wanted to set something up along the lines of: Name: CPU Temp Over 65 Tests (Checker Condition): entSensorValue isBigger 65 Device match (Device Association): type equals network Hostname match *t* (any device with an "n" in it ?) Hostname match *new* (any device with "new" string in it?) Entity Association: entSensorType equals Celsius (monitor temperature?) Not sure how to set that up, Any help would be greatly appreciated :)

2 1

Re: [Observium] observium Digest, Vol 48, Issue 56
by Kiru Pananthan 10 Jul '14

10 Jul '14

Hi Nikolay Shopik you can try this Create cron jobs, create a new file /etc/cron.d/observium with the following contents *Important Note: Please note that the below example includes a username, so will only work in /etc/crontab or /etc/cron.d/observium. It will not work in a user crontab edited with crontab -e* 1 2 3 33 */6 * * * root /opt/observium/discovery.php -h all >> /dev/null 2>&1 */5 * * * * root /opt/observium/discovery.php -h new >> /dev/null 2>&1 */5 * * * * root /opt/observium/poller-wrapper.py 1 >> /dev/null 2>&1 On Thu, Jul 10, 2014 at 4:50 PM, <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: Poll devices in groups (Nikolay Shopik) > 2. Switch IP address (Kiru Pananthan) > 3. Re: Switch IP address (Peter Persson) > 4. Re: Switch IP address (Bryde, Ole) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 09 Jul 2014 23:08:13 +0400 > From: Nikolay Shopik <shopik(a)inblock.ru> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Poll devices in groups > Message-ID: <53BD931D.8060809(a)inblock.ru> > Content-Type: text/plain; charset=utf-8 > > No, who does that anyway? If you need less information, just don't poll > what you don't need (disable modules). > > On 09.07.2014 22:42, Benoit Lambert wrote: > > Is it possible to poll devices in groups? > > Example: poll routers every 5 minutes and switches every 15 minutes. > > > ------------------------------ > > Message: 2 > Date: Thu, 10 Jul 2014 16:22:15 +0800 > From: Kiru Pananthan <kirup(a)aism.edu.my> > To: "observium(a)observium.org" <observium(a)observium.org> > Subject: [Observium] Switch IP address > Message-ID: > <CAEax4xXcEB6JQYZDK+QRRtLV-dVkQ-muzktHD= > 5Czw4UCsiUbg(a)mail.gmail.com> > Content-Type: text/plain; charset="us-ascii" > > Dear all > > How do we check the ip address on a switch in Observium > > -- > > Kind Regards, > > Kirupananthan Yogalingam, > Assistant Manager - ICT > > ---------------------------------------------------------------------------------------------------------- > Australian International School Malaysia (AISM) > No.22 Jalan Anggerik, > The Mines Resort City, > 43300 Seri Kembangan, > Selangor, Malaysia. > > > > > *T:* +60 3 8949 5000 *F*: +60 3 8949 5100 > *E*: kirup(a)aism.edu.my *W*: http://www.aism.edu.my/ > *Direct Line*: +60-3-8949 5030 > > ---------------------------------------------------------------------------------------------------------- > > <https://www.facebook.com/aismalaysia> > <http://www.youtube.com/user/AISMvideos> > <http://www.aism.edu.my/virtualtour> > > -- > *Confidentiality Disclaimer:* This e-mail and any attachments are > confidential and intended solely for the intended addressee and may also be > privileged or exempt from disclosure under applicable law. If you are not > the intended addressee, or have received this e-mail in error, please > notify the sender immediately, delete it from your system and do not copy, > disclose, distribute or otherwise act in reliance upon any part of this > e-mail or its attachments. Australian International School Malaysia and all > affiliates under Taylor's Education Group does not accept responsibility > for any loss arising from unauthorised access to, or interference with, any > internet communications by any third party in reliance to this email, or > from the transmission of any viruses. Please note that any views or > opinions presented in this email are solely those of the author and do not > necessarily represent those of Australian International School Malaysia > and > all affiliates under Taylor's Education Group. Replies to this e-mail may > be monitored by Australian International School Malaysia and all > affiliates under Taylor's Education Group for operational or business > reasons. >

2 1

Re: [Observium] observium Digest, Vol 48, Issue 56
by Kiru Pananthan 10 Jul '14

10 Jul '14

Thanks Peter Persson On Thu, Jul 10, 2014 at 4:50 PM, <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: Poll devices in groups (Nikolay Shopik) > 2. Switch IP address (Kiru Pananthan) > 3. Re: Switch IP address (Peter Persson) > 4. Re: Switch IP address (Bryde, Ole) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 09 Jul 2014 23:08:13 +0400 > From: Nikolay Shopik <shopik(a)inblock.ru> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Poll devices in groups > Message-ID: <53BD931D.8060809(a)inblock.ru> > Content-Type: text/plain; charset=utf-8 > > No, who does that anyway? If you need less information, just don't poll > what you don't need (disable modules). > > On 09.07.2014 22:42, Benoit Lambert wrote: > > Is it possible to poll devices in groups? > > Example: poll routers every 5 minutes and switches every 15 minutes. > > > ------------------------------ > > Message: 2 > Date: Thu, 10 Jul 2014 16:22:15 +0800 > From: Kiru Pananthan <kirup(a)aism.edu.my> > To: "observium(a)observium.org" <observium(a)observium.org> > Subject: [Observium] Switch IP address > Message-ID: > <CAEax4xXcEB6JQYZDK+QRRtLV-dVkQ-muzktHD= > 5Czw4UCsiUbg(a)mail.gmail.com> > Content-Type: text/plain; charset="us-ascii" > > Dear all > > How do we check the ip address on a switch in Observium > > -- > > Kind Regards, > > Kirupananthan Yogalingam, > Assistant Manager - ICT > > ---------------------------------------------------------------------------------------------------------- > Australian International School Malaysia (AISM) > No.22 Jalan Anggerik, > The Mines Resort City, > 43300 Seri Kembangan, > Selangor, Malaysia. > > > > > *T:* +60 3 8949 5000 *F*: +60 3 8949 5100 > *E*: kirup(a)aism.edu.my *W*: http://www.aism.edu.my/ > *Direct Line*: +60-3-8949 5030 > > ---------------------------------------------------------------------------------------------------------- > > <https://www.facebook.com/aismalaysia> > <http://www.youtube.com/user/AISMvideos> > <http://www.aism.edu.my/virtualtour> > > -- > *Confidentiality Disclaimer:* This e-mail and any attachments are > confidential and intended solely for the intended addressee and may also be > privileged or exempt from disclosure under applicable law. If you are not > the intended addressee, or have received this e-mail in error, please > notify the sender immediately, delete it from your system and do not copy, > disclose, distribute or otherwise act in reliance upon any part of this > e-mail or its attachments. Australian International School Malaysia and all > affiliates under Taylor's Education Group does not accept responsibility > for any loss arising from unauthorised access to, or interference with, any > internet communications by any third party in reliance to this email, or > from the transmission of any viruses. Please note that any views or > opinions presented in this email are solely those of the author and do not > necessarily represent those of Australian International School Malaysia > and > all affiliates under Taylor's Education Group. Replies to this e-mail may > be monitored by Australian International School Malaysia and all > affiliates under Taylor's Education Group for operational or business > reasons. >

1 0

Switch IP address
by Kiru Pananthan 10 Jul '14

10 Jul '14

Dear all How do we check the ip address on a switch in Observium -- Kind Regards, Kirupananthan Yogalingam, Assistant Manager - ICT ---------------------------------------------------------------------------------------------------------- Australian International School Malaysia (AISM) No.22 Jalan Anggerik, The Mines Resort City, 43300 Seri Kembangan, Selangor, Malaysia. *T:* +60 3 8949 5000 *F*: +60 3 8949 5100 *E*: kirup(a)aism.edu.my *W*: http://www.aism.edu.my/ *Direct Line*: +60-3-8949 5030 ---------------------------------------------------------------------------------------------------------- <https://www.facebook.com/aismalaysia> <http://www.youtube.com/user/AISMvideos> <http://www.aism.edu.my/virtualtour> -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

3 2

Poll devices in groups
by Benoit Lambert 09 Jul '14

09 Jul '14

Is it possible to poll devices in groups? Example: poll routers every 5 minutes and switches every 15 minutes. Thanks in advance for any help. -----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of observium-request(a)observium.org Sent: July 9, 2014 6:59 AM To: observium(a)observium.org Subject: observium Digest, Vol 48, Issue 54 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: ***SPAM*** abnormal value for the alert duration on observium alerts (Tom Laermans) 2. Re: abnormal value for the alert duration on observium alerts (Supun Rathnayake) 3. Re: average temperature (Adam Armstrong) 4. Re: June Changelog (Adam Armstrong) ---------------------------------------------------------------------- Message: 1 Date: Wed, 09 Jul 2014 10:55:55 +0200 From: Tom Laermans <tom.laermans(a)powersource.cx> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] ***SPAM*** abnormal value for the alert duration on observium alerts Message-ID: <53BD039B.5020702(a)powersource.cx> Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" Hi Supun, I've noticed this too, and told Adam, but have not put it in Jira, and we probably forgot. It seems sometimes the duration is erroneously calculated from a previous firing of the alert... so that's probably the duration since you last got this alert. Or something. I'm not quite sure. Would you mind creating an issue in the bugtracker (jira.observium.org) and attaching the screenshot? Thanks! Tom On 07/09/2014 06:14 AM, Supun Rathnayake wrote: > Hi , > > we noticed an abnormal value in the alert duration of email alert > coming couple of time for different metrics threshold breaches. > please refer the annexed screenshot of the same. The alert duration is > more than the device uptime. > > Not sure this of an expected behavior or not, please have a look at it. > > we are using the subscription version with the recent updates. > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

poller-wrapper.py
by Jürgen Winkler 09 Jul '14

09 Jul '14

Hi, im having some troubles using the poller-wrapper.py , the poller itself worked like charm but when i use the poller-wrapper.py in the cronjob it tells me it can’t connect to the mysql DB. Is it possible that there is a problem with non default mysql ports in the poller-wrapper.py script ?? im using ubuntu 12.04 with the latest version out of the SVN . thx in advance -- Jürgen Winkler Technik ________________________________________________________________________________ Xidras GmbH Stockern 47 3744 Stockern Austria Tel: 0043 2983 201 30 5 08 Fax: 0043 2983 201 30 5 08 9 Email: juergen.winkler(a)xidras.com Web: http://www.xidras.com FN 317036 f | Landesgericht Krems | ATU64485024 ________________________________________________________________________________ VERTRAULICHE INFORMATIONEN! Diese eMail ennthält vertrauliche Informationen und ist nur für den berechtigten Empfänger bestimmt. Wenn diese eMail nicht für Sie bestimmt ist, bitten wir Sie, diese eMail an uns zurückzusenden und anschließend auf Ihrem Computer und Mail-Server zu löschen. Solche eMails und Anlagen dürfen Sie weder nutzen, noch verarbeiten oder Dritten zugänglich machen, gleich in welcher Form. Wir danken für Ihre Kooperation! CONFIDENTIAL! This email contains confidential information and is intended for the authorised recipient only. If you are not an authorised recipient, please return the email to us and then delete it from your computer and mail-server. You may neither use nor edit any such emails including attachments, nor make them accessible to third parties in any manner whatsoever. Thank you for your cooperation ________________________________________________________________________________

3 5

average temperature
by Simon Smith 09 Jul '14

09 Jul '14

Hi All, u think this is more of a feature request or something i have forgotten to setup i updated my install the other day and i noticed the Average graph for the processors WONDERFUL :-D is it possible to do the same for the temperatures of the cores on the processors? currently my install shows 4 temperature sensors for each core, and i think it would be good if i could get the overall temperature of the CPU instead of each core Regards Simon

2 1