- observium - lists.observium.org

high CPU / slow response
by Paul Meys 15 Jul '14

15 Jul '14

Hi, I'm running the latest version, but it is extremely slow. Even to load the login-page, it takes a very long time. I always see mysqld using almost all CPU-power. the server is running in vmware, os = debian. Currently I have one v-core assigned with 16G of ram. ( already tried with 4 cores.. ) In Observium I have 75 devices with a total of 7500 ports. Please advice ;-) Thank you, Have a good day, Paul

5 9

Re: [Observium] Observium] Move my monitoring system
by Adam Armstrong 14 Jul '14

14 Jul '14

And don't forget to disable the old server if it auto updates, else the account may get blocked :) Adam. Tom Laermans wrote:

1 0

Move my monitoring system
by Ryan Milton 14 Jul '14

14 Jul '14

Hi, I am having to move my Observium installation to a new server. I have the paid version of Observium, and am basically taking an older version and want to use my existing license. What is the proper path to make this move? Thanks, Ryan

2 3

Observium Capacity for large networks
by Daniel Josue Rodriguez Paiz 14 Jul '14

14 Jul '14

Hello, I'm interested on using Observium Pro to monitoring a large network of 15,000 devices more or less. Does anyone know if observium works fine in a large network? Thanks in advance for your replies.

7 11

Three phase UPS, [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 14 Jul '14

14 Jul '14

Does anyone else have a three phase ups. I was wanting to know if it is using the UPS-MIB and that you've done something to get all three phases shown as graphs ? I've done a debug on the discovery and it is clear that all phases are returned by the bulkwalk statements. so far i've created ./html/images/os/emerson.png and ./includes/polling/os/emerson.inc.php and added to my config.php the following: $os = "emerson"; $config['os'][$os]['text'] = "Emerson UPS"; $config['os'][$os]['type'] = "power"; $config['os'][$os]['over'][0]['graph'] = "device_voltage"; $config['os'][$os]['over'][0]['text'] = "Voltage"; $config['os'][$os]['over'][1]['graph'] = "device_current"; $config['os'][$os]['over'][1]['text'] = "Current"; $config['os'][$os]['over'][2]['graph'] = "device_frequency"; $config['os'][$os]['over'][2]['text'] = "Frequency"; $config['os'][$os]['sysObjectID'][] = ".1.3.6.1.2.1.33"; $config['os'][$os]['mibs'][] = "UPS-MIB"; root@dc3monitor2:/opt/observium# snmpwalk dc6ups01 -v2c -c xxxxx -M /opt/observium/mibs -m UPS-MIB upsMIB UPS-MIB::upsIdentManufacturer.0 = STRING: Chloride UPS-MIB::upsIdentModel.0 = STRING: 80Net UPS-MIB::upsIdentUPSSoftwareVersion.0 = STRING: 10h01517 V4.00.100312 (5135) / 10h01531 V1.10.100326,10h01530 V UPS-MIB::upsIdentAgentSoftwareVersion.0 = STRING: 3.15.3397 UPS-MIB::upsIdentName.0 = STRING: dc6ups01 UPS-MIB::upsIdentAttachedDevices.0 = STRING: none UPS-MIB::upsBatteryStatus.0 = INTEGER: batteryNormal(2) UPS-MIB::upsSecondsOnBattery.0 = INTEGER: 0 seconds UPS-MIB::upsEstimatedMinutesRemaining.0 = INTEGER: 164 minutes UPS-MIB::upsEstimatedChargeRemaining.0 = INTEGER: 100 percent UPS-MIB::upsBatteryVoltage.0 = INTEGER: 5440 0.1 Volt DC UPS-MIB::upsBatteryCurrent.0 = INTEGER: 2 0.1 Amp DC UPS-MIB::upsBatteryTemperature.0 = INTEGER: 19 degrees Centigrade UPS-MIB::upsInputLineBads.0 = Counter32: 56 UPS-MIB::upsInputNumLines.0 = INTEGER: 3 UPS-MIB::upsInputFrequency.1 = INTEGER: 499 0.1 Hertz UPS-MIB::upsInputFrequency.2 = INTEGER: 499 0.1 Hertz UPS-MIB::upsInputFrequency.3 = INTEGER: 499 0.1 Hertz UPS-MIB::upsInputVoltage.1 = INTEGER: 245 RMS Volts UPS-MIB::upsInputVoltage.2 = INTEGER: 245 RMS Volts UPS-MIB::upsInputVoltage.3 = INTEGER: 243 RMS Volts UPS-MIB::upsInputCurrent.1 = INTEGER: 30 0.1 RMS Amp UPS-MIB::upsInputCurrent.2 = INTEGER: 30 0.1 RMS Amp UPS-MIB::upsInputCurrent.3 = INTEGER: 31 0.1 RMS Amp UPS-MIB::upsInputTruePower.1 = INTEGER: 7500 Watts UPS-MIB::upsInputTruePower.2 = INTEGER: 7500 Watts UPS-MIB::upsInputTruePower.3 = INTEGER: 7700 Watts UPS-MIB::upsOutputSource.0 = INTEGER: normal(3) UPS-MIB::upsOutputFrequency.0 = INTEGER: 499 0.1 Hertz UPS-MIB::upsOutputNumLines.0 = INTEGER: 3 UPS-MIB::upsOutputVoltage.1 = INTEGER: 241 RMS Volts UPS-MIB::upsOutputVoltage.2 = INTEGER: 239 RMS Volts UPS-MIB::upsOutputVoltage.3 = INTEGER: 239 RMS Volts UPS-MIB::upsOutputCurrent.1 = INTEGER: 384 0.1 RMS Amp UPS-MIB::upsOutputCurrent.2 = INTEGER: 288 0.1 RMS Amp UPS-MIB::upsOutputCurrent.3 = INTEGER: 328 0.1 RMS Amp UPS-MIB::upsOutputPower.1 = INTEGER: 7900 Watts UPS-MIB::upsOutputPower.2 = INTEGER: 6200 Watts UPS-MIB::upsOutputPower.3 = INTEGER: 7200 Watts UPS-MIB::upsOutputPercentLoad.1 = INTEGER: 27 percent UPS-MIB::upsOutputPercentLoad.2 = INTEGER: 20 percent UPS-MIB::upsOutputPercentLoad.3 = INTEGER: 23 percent UPS-MIB::upsAlarmsPresent.0 = Gauge32: 0 UPS-MIB::upsTestId.0 = OID: UPS-MIB::upsTestNoTestsInitiated UPS-MIB::upsTestSpinLock.0 = INTEGER: 53 UPS-MIB::upsTestResultsSummary.0 = INTEGER: 1082939236 UPS-MIB::upsTestResultsDetail.0 = STRING: UPS-MIB::upsTestStartTime.0 = Timeticks: (0) 0:00:00.00 UPS-MIB::upsTestElapsedTime.0 = Wrong Type (should be INTEGER): Timeticks: (654440200) 75 days, 17:53:22.00 UPS-MIB::upsShutdownType.0 = INTEGER: 0 UPS-MIB::upsShutdownAfterDelay.0 = INTEGER: 0 seconds UPS-MIB::upsStartupAfterDelay.0 = INTEGER: 0 seconds UPS-MIB::upsRebootWithDuration.0 = INTEGER: 0 seconds UPS-MIB::upsAutoRestart.0 = INTEGER: 0 UPS-MIB::upsConfigInputVoltage.0 = INTEGER: 240 RMS Volts UPS-MIB::upsConfigInputFreq.0 = INTEGER: 500 0.1 Hertz UPS-MIB::upsConfigOutputVoltage.0 = INTEGER: 240 RMS Volts UPS-MIB::upsConfigOutputFreq.0 = INTEGER: 500 0.1 Hertz UPS-MIB::upsConfigOutputVA.0 = INTEGER: 99900 Volt-Amps UPS-MIB::upsConfigOutputPower.0 = INTEGER: 90000 Watts UPS-MIB::upsConfigLowBattTime.0 = INTEGER: 0 minutes UPS-MIB::upsConfigAudibleStatus.0 = INTEGER: 0 UPS-MIB::upsConfigLowVoltageTransferPoint.0 = INTEGER: 168 RMS Volts UPS-MIB::upsConfigHighVoltageTransferPoint.0 = INTEGER: 274 RMS Volts thanks Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine(a)familycourt.gov.au ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

3 5

install not quite complete
by Dave Boulter 14 Jul '14

14 Jul '14

Hi, Have the web interface up and running and one device is discovered. When I click on that it says the devices is not found. When I look in the html directory id don't see any devices file or subdirectory, any ideas? -- Dave Boulter TechRemedy o 02 8213 6187 | f 02 8213 6204 | m 0417 705 997 e dave.boulter(a)techremedy.com.au<mailto:dave.boulter@techremedy.com.au> | w www.techremedy.com.au<http://www.techremedy.com.au/>

3 3

OID Questions
by Andrés™ 12 Jul '14

12 Jul '14

Hi, I just installed observium and it's really great. I would like to know if it is posible to add SNR (Signal2Noise) and Cable Modem registered for my Cisco CMTS ubr7225. I have Cacti graphs with these oids: Example: CM count = 1.3.6.1.4.1.9.9.116.1.4.1.1.5.1182 SNR: 1.3.6.1.2.1.10.127.1.1.4.1.5.1182 Thank you in advance.

1 0

About hiding "Same subnet" details for user accounts
by Yavor Buyukliev 11 Jul '14

11 Jul '14

Hi List, is there any way to disable "Same subnet" details on interface for user accounts, or globally for all? I try to set $config['web_show_disabled'] = TRUE; in my config.php, but can't see any change at all. Best regards!

2 6

PowerConnect 5548
by Josh Hopper 11 Jul '14

11 Jul '14

I love the update you guys did in May/June. My PowerConnect 6224 switches have major improvements in what they graph. However, my PowerConnect 5548 switch has a draw error on everything but bandwidth. Is there a way to resolve this? -- Sincerely, Joshua Hopper, A+ CE Network Administrator 420 3rd Ave NW Hickory NC 28601 Office: 828-449-1839x2160 | Cell: 828-855-7565 Protect Plus Air Holdings, LLC and Affiliates, Protect Plus, LLC and Affiliates, Imagine One Resources, LLC and Affiliates, Protect Plus Surfaces, LLC and Affiliates Confidentiality Notice: This e-mail is intended only for the addressee named above. It contains information that is privileged, confidential or otherwise protected from use and disclosure. If you are not the intended recipient, you are hereby notified that any review, disclosure, copying, or dissemination of this transmission, or taking of any action in reliance on its contents, or other use is strictly prohibited. If you have received this transmission in error, please reply to the sender listed above immediately and permanently delete this message from your inbox. Thank you for your cooperation.

3 6

observium alert check for temperature
by Benoit Lambert 11 Jul '14

11 Jul '14

There is nothing in http://pastebin.com/3D9zQcFS about temperature checker. Is the entity temp-CPU/temp-System?

2 1

More Documentation on Alert Checkers?
by Benoit Lambert 10 Jul '14

10 Jul '14

Hi, Is there more documentation on how to setup alert checkers? Maybe there's a list of entities that I can pick from? I wanted to set something up along the lines of: Name: CPU Temp Over 65 Tests (Checker Condition): entSensorValue isBigger 65 Device match (Device Association): type equals network Hostname match *t* (any device with an "n" in it ?) Hostname match *new* (any device with "new" string in it?) Entity Association: entSensorType equals Celsius (monitor temperature?) Not sure how to set that up, Any help would be greatly appreciated :)

2 1

Re: [Observium] observium Digest, Vol 48, Issue 56
by Kiru Pananthan 10 Jul '14

10 Jul '14

Hi Nikolay Shopik you can try this Create cron jobs, create a new file /etc/cron.d/observium with the following contents *Important Note: Please note that the below example includes a username, so will only work in /etc/crontab or /etc/cron.d/observium. It will not work in a user crontab edited with crontab -e* 1 2 3 33 */6 * * * root /opt/observium/discovery.php -h all >> /dev/null 2>&1 */5 * * * * root /opt/observium/discovery.php -h new >> /dev/null 2>&1 */5 * * * * root /opt/observium/poller-wrapper.py 1 >> /dev/null 2>&1 On Thu, Jul 10, 2014 at 4:50 PM, <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: Poll devices in groups (Nikolay Shopik) > 2. Switch IP address (Kiru Pananthan) > 3. Re: Switch IP address (Peter Persson) > 4. Re: Switch IP address (Bryde, Ole) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 09 Jul 2014 23:08:13 +0400 > From: Nikolay Shopik <shopik(a)inblock.ru> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Poll devices in groups > Message-ID: <53BD931D.8060809(a)inblock.ru> > Content-Type: text/plain; charset=utf-8 > > No, who does that anyway? If you need less information, just don't poll > what you don't need (disable modules). > > On 09.07.2014 22:42, Benoit Lambert wrote: > > Is it possible to poll devices in groups? > > Example: poll routers every 5 minutes and switches every 15 minutes. > > > ------------------------------ > > Message: 2 > Date: Thu, 10 Jul 2014 16:22:15 +0800 > From: Kiru Pananthan <kirup(a)aism.edu.my> > To: "observium(a)observium.org" <observium(a)observium.org> > Subject: [Observium] Switch IP address > Message-ID: > <CAEax4xXcEB6JQYZDK+QRRtLV-dVkQ-muzktHD= > 5Czw4UCsiUbg(a)mail.gmail.com> > Content-Type: text/plain; charset="us-ascii" > > Dear all > > How do we check the ip address on a switch in Observium > > -- > > Kind Regards, > > Kirupananthan Yogalingam, > Assistant Manager - ICT > > ---------------------------------------------------------------------------------------------------------- > Australian International School Malaysia (AISM) > No.22 Jalan Anggerik, > The Mines Resort City, > 43300 Seri Kembangan, > Selangor, Malaysia. > > > > > *T:* +60 3 8949 5000 *F*: +60 3 8949 5100 > *E*: kirup(a)aism.edu.my *W*: http://www.aism.edu.my/ > *Direct Line*: +60-3-8949 5030 > > ---------------------------------------------------------------------------------------------------------- > > <https://www.facebook.com/aismalaysia> > <http://www.youtube.com/user/AISMvideos> > <http://www.aism.edu.my/virtualtour> > > -- > *Confidentiality Disclaimer:* This e-mail and any attachments are > confidential and intended solely for the intended addressee and may also be > privileged or exempt from disclosure under applicable law. If you are not > the intended addressee, or have received this e-mail in error, please > notify the sender immediately, delete it from your system and do not copy, > disclose, distribute or otherwise act in reliance upon any part of this > e-mail or its attachments. Australian International School Malaysia and all > affiliates under Taylor's Education Group does not accept responsibility > for any loss arising from unauthorised access to, or interference with, any > internet communications by any third party in reliance to this email, or > from the transmission of any viruses. Please note that any views or > opinions presented in this email are solely those of the author and do not > necessarily represent those of Australian International School Malaysia > and > all affiliates under Taylor's Education Group. Replies to this e-mail may > be monitored by Australian International School Malaysia and all > affiliates under Taylor's Education Group for operational or business > reasons. >

2 1

Re: [Observium] observium Digest, Vol 48, Issue 56
by Kiru Pananthan 10 Jul '14

10 Jul '14

Thanks Peter Persson On Thu, Jul 10, 2014 at 4:50 PM, <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: Poll devices in groups (Nikolay Shopik) > 2. Switch IP address (Kiru Pananthan) > 3. Re: Switch IP address (Peter Persson) > 4. Re: Switch IP address (Bryde, Ole) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 09 Jul 2014 23:08:13 +0400 > From: Nikolay Shopik <shopik(a)inblock.ru> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Poll devices in groups > Message-ID: <53BD931D.8060809(a)inblock.ru> > Content-Type: text/plain; charset=utf-8 > > No, who does that anyway? If you need less information, just don't poll > what you don't need (disable modules). > > On 09.07.2014 22:42, Benoit Lambert wrote: > > Is it possible to poll devices in groups? > > Example: poll routers every 5 minutes and switches every 15 minutes. > > > ------------------------------ > > Message: 2 > Date: Thu, 10 Jul 2014 16:22:15 +0800 > From: Kiru Pananthan <kirup(a)aism.edu.my> > To: "observium(a)observium.org" <observium(a)observium.org> > Subject: [Observium] Switch IP address > Message-ID: > <CAEax4xXcEB6JQYZDK+QRRtLV-dVkQ-muzktHD= > 5Czw4UCsiUbg(a)mail.gmail.com> > Content-Type: text/plain; charset="us-ascii" > > Dear all > > How do we check the ip address on a switch in Observium > > -- > > Kind Regards, > > Kirupananthan Yogalingam, > Assistant Manager - ICT > > ---------------------------------------------------------------------------------------------------------- > Australian International School Malaysia (AISM) > No.22 Jalan Anggerik, > The Mines Resort City, > 43300 Seri Kembangan, > Selangor, Malaysia. > > > > > *T:* +60 3 8949 5000 *F*: +60 3 8949 5100 > *E*: kirup(a)aism.edu.my *W*: http://www.aism.edu.my/ > *Direct Line*: +60-3-8949 5030 > > ---------------------------------------------------------------------------------------------------------- > > <https://www.facebook.com/aismalaysia> > <http://www.youtube.com/user/AISMvideos> > <http://www.aism.edu.my/virtualtour> > > -- > *Confidentiality Disclaimer:* This e-mail and any attachments are > confidential and intended solely for the intended addressee and may also be > privileged or exempt from disclosure under applicable law. If you are not > the intended addressee, or have received this e-mail in error, please > notify the sender immediately, delete it from your system and do not copy, > disclose, distribute or otherwise act in reliance upon any part of this > e-mail or its attachments. Australian International School Malaysia and all > affiliates under Taylor's Education Group does not accept responsibility > for any loss arising from unauthorised access to, or interference with, any > internet communications by any third party in reliance to this email, or > from the transmission of any viruses. Please note that any views or > opinions presented in this email are solely those of the author and do not > necessarily represent those of Australian International School Malaysia > and > all affiliates under Taylor's Education Group. Replies to this e-mail may > be monitored by Australian International School Malaysia and all > affiliates under Taylor's Education Group for operational or business > reasons. >

1 0

Switch IP address
by Kiru Pananthan 10 Jul '14

10 Jul '14

Dear all How do we check the ip address on a switch in Observium -- Kind Regards, Kirupananthan Yogalingam, Assistant Manager - ICT ---------------------------------------------------------------------------------------------------------- Australian International School Malaysia (AISM) No.22 Jalan Anggerik, The Mines Resort City, 43300 Seri Kembangan, Selangor, Malaysia. *T:* +60 3 8949 5000 *F*: +60 3 8949 5100 *E*: kirup(a)aism.edu.my *W*: http://www.aism.edu.my/ *Direct Line*: +60-3-8949 5030 ---------------------------------------------------------------------------------------------------------- <https://www.facebook.com/aismalaysia> <http://www.youtube.com/user/AISMvideos> <http://www.aism.edu.my/virtualtour> -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

3 2

Poll devices in groups
by Benoit Lambert 09 Jul '14

09 Jul '14

Is it possible to poll devices in groups? Example: poll routers every 5 minutes and switches every 15 minutes. Thanks in advance for any help. -----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of observium-request(a)observium.org Sent: July 9, 2014 6:59 AM To: observium(a)observium.org Subject: observium Digest, Vol 48, Issue 54 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: ***SPAM*** abnormal value for the alert duration on observium alerts (Tom Laermans) 2. Re: abnormal value for the alert duration on observium alerts (Supun Rathnayake) 3. Re: average temperature (Adam Armstrong) 4. Re: June Changelog (Adam Armstrong) ---------------------------------------------------------------------- Message: 1 Date: Wed, 09 Jul 2014 10:55:55 +0200 From: Tom Laermans <tom.laermans(a)powersource.cx> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] ***SPAM*** abnormal value for the alert duration on observium alerts Message-ID: <53BD039B.5020702(a)powersource.cx> Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" Hi Supun, I've noticed this too, and told Adam, but have not put it in Jira, and we probably forgot. It seems sometimes the duration is erroneously calculated from a previous firing of the alert... so that's probably the duration since you last got this alert. Or something. I'm not quite sure. Would you mind creating an issue in the bugtracker (jira.observium.org) and attaching the screenshot? Thanks! Tom On 07/09/2014 06:14 AM, Supun Rathnayake wrote: > Hi , > > we noticed an abnormal value in the alert duration of email alert > coming couple of time for different metrics threshold breaches. > please refer the annexed screenshot of the same. The alert duration is > more than the device uptime. > > Not sure this of an expected behavior or not, please have a look at it. > > we are using the subscription version with the recent updates. > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

poller-wrapper.py
by Jürgen Winkler 09 Jul '14

09 Jul '14

Hi, im having some troubles using the poller-wrapper.py , the poller itself worked like charm but when i use the poller-wrapper.py in the cronjob it tells me it can’t connect to the mysql DB. Is it possible that there is a problem with non default mysql ports in the poller-wrapper.py script ?? im using ubuntu 12.04 with the latest version out of the SVN . thx in advance -- Jürgen Winkler Technik ________________________________________________________________________________ Xidras GmbH Stockern 47 3744 Stockern Austria Tel: 0043 2983 201 30 5 08 Fax: 0043 2983 201 30 5 08 9 Email: juergen.winkler(a)xidras.com Web: http://www.xidras.com FN 317036 f | Landesgericht Krems | ATU64485024 ________________________________________________________________________________ VERTRAULICHE INFORMATIONEN! Diese eMail ennthält vertrauliche Informationen und ist nur für den berechtigten Empfänger bestimmt. Wenn diese eMail nicht für Sie bestimmt ist, bitten wir Sie, diese eMail an uns zurückzusenden und anschließend auf Ihrem Computer und Mail-Server zu löschen. Solche eMails und Anlagen dürfen Sie weder nutzen, noch verarbeiten oder Dritten zugänglich machen, gleich in welcher Form. Wir danken für Ihre Kooperation! CONFIDENTIAL! This email contains confidential information and is intended for the authorised recipient only. If you are not an authorised recipient, please return the email to us and then delete it from your computer and mail-server. You may neither use nor edit any such emails including attachments, nor make them accessible to third parties in any manner whatsoever. Thank you for your cooperation ________________________________________________________________________________

3 5

average temperature
by Simon Smith 09 Jul '14

09 Jul '14

Hi All, u think this is more of a feature request or something i have forgotten to setup i updated my install the other day and i noticed the Average graph for the processors WONDERFUL :-D is it possible to do the same for the temperatures of the cores on the processors? currently my install shows 4 temperature sensors for each core, and i think it would be good if i could get the overall temperature of the CPU instead of each core Regards Simon

2 1

abnormal value for the alert duration on observium alerts
by Supun Rathnayake 09 Jul '14

09 Jul '14

Hi , we noticed an abnormal value in the alert duration of email alert coming couple of time for different metrics threshold breaches. please refer the annexed screenshot of the same. The alert duration is more than the device uptime. Not sure this of an expected behavior or not, please have a look at it. we are using the subscription version with the recent updates. -- With Best Regards, Supun Rathnayake Lanka communication Services (Pvt) Ltd. 65C, Dharmapala Mawatha, Colombo 07. Sri Lanka. Tel: +94-11-2437545 http://www.lankacom.net http://blog.lankacom.net

2 2

Graphs not drawing after latest update
by Mahomed Hussein 08 Jul '14

08 Jul '14

Hi I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I’ve noticed that some graphs are not drawing. We haven’t had any issues with the server and it has been up for 49 days. I’m not sure where to start. So far I’ve tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else). Please let me know if you require any other info. Thanks in advance for any assistance. A couple of screenshots are below. [cid:image001.png@01CF9518.FABC1E60] [cid:image002.png@01CF9518.FABC1E60] Kind regards, Mahomed Hussein Custodian Data Centre Email: Mahomed(a)CustodianDC.com http://www.CustodianDC.com

9 26

Unknown processor
by Kiru Pananthan 07 Jul '14

07 Jul '14

Dear all All our windows server process information has been poll as unknown processor type is this an known issue are fix for this -- Kind Regards, Kirupananthan Yogalingam, Assistant Manager - ICT ---------------------------------------------------------------------------------------------------------- Australian International School Malaysia (AISM) No.22 Jalan Anggerik, The Mines Resort City, 43300 Seri Kembangan, Selangor, Malaysia. *T:* +60 3 8949 5000 *F*: +60 3 8949 5100 *E*: kirup(a)aism.edu.my *W*:http://www.aism.edu.my/ *Direct Line*: +60-3-8949 5030 ---------------------------------------------------------------------------------------------------------- <https://www.facebook.com/aismalaysia> <http://www.youtube.com/user/AISMvideos> <http://www.aism.edu.my/virtualtour> -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

3 2

Re: [Observium] observium Digest, Vol 48, Issue 48
by Kiru Pananthan 07 Jul '14

07 Jul '14

Dear Tom Can i follow the below step for wmi poll enable i am new to observium http://jira.observium.org/secure/attachment/11319/WMIPoller-011013-1429-4.p… -- Kind Regards, Kirupananthan Yogalingam, Assistant Manager - ICT ---------------------------------------------------------------------------------------------------------- Australian International School Malaysia (AISM) No.22 Jalan Anggerik, The Mines Resort City, 43300 Seri Kembangan, Selangor, Malaysia. *T:* +60 3 8949 5000 *F*: +60 3 8949 5100 *E*: kirup(a)aism.edu.my *W*:http://www.aism.edu.my/ *Direct Line*: +60-3-8949 5030 ---------------------------------------------------------------------------------------------------------- <https://www.facebook.com/aismalaysia> <http://www.youtube.com/user/AISMvideos> <http://www.aism.edu.my/virtualtour> On Jul 7, 2014, at 10:45 PM, "observium-request(a)observium.org" < observium-request(a)observium.org> wrote: Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: PowerConnect 5548 (Moore, Cameron) 2. Cisco ASA VPN tunnel monitoring (Dan Yasny) 3. Unknown processor (Kiru Pananthan) 4. Re: Unknown processor (Tom Laermans) ---------------------------------------------------------------------- Message: 1 Date: Mon, 7 Jul 2014 14:33:17 +0000 From: "Moore, Cameron" <cmoore(a)hsutx.edu> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] PowerConnect 5548 Message-ID: <CE08F34B0A8D7F48B1EFBC22E994A71C015745E34F(a)HSUEX14MBX1.hsutx.edu> Content-Type: text/plain; charset="iso-8859-1" Try this patch: http://jira.observium.org/browse/OBSERVIUM-886 -- Cameron Moore -----Original Message----- From: observium [mailto:observium-bounces@observium.org <observium-bounces(a)observium.org>] On Behalf Of Josh Hopper Sent: Friday, July 04, 2014 1:02 PM To: Observium Network Observation System Subject: [Observium] PowerConnect 5548 I love the update you guys did in May/June. My PowerConnect 6224 switches have major improvements in what they graph. However, my PowerConnect 5548 switch has a draw error on everything but bandwidth. Is there a way to resolve this? -- Sincerely, Joshua Hopper, A+ CE Network Administrator ??????????? 420 3rd Ave NW Hickory NC 28601 Office: 828-449-1839x2160 | Cell: 828-855-7565 Protect Plus Air Holdings, LLC and Affiliates, Protect Plus, LLC and Affiliates, Imagine One Resources, LLC and Affiliates, Protect Plus Surfaces, LLC and Affiliates Confidentiality Notice: This e-mail is intended only for the addressee named above. It contains information that is privileged, confidential or otherwise protected from use and disclosure. If you are not the intended recipient, you are hereby notified that any review, disclosure, copying, or dissemination of this transmission, or taking of any action in reliance on its contents, or other use is strictly prohibited. If you have received this transmission in error, please reply to the sender listed above immediately and permanently delete this message from your inbox. Thank you for your cooperation. _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ------------------------------ Message: 2 Date: Mon, 7 Jul 2014 10:38:06 -0400 From: Dan Yasny <dyasny(a)gmail.com> To: observium(a)observium.org Subject: [Observium] Cisco ASA VPN tunnel monitoring Message-ID: <CALLXwb7nmKUR_EZi9BZJvLA4J8gCFp8i8gPNJ9D5MonhgEBSoA(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Hi all, I m wondering if there are any plans to extend the ASA monitoring module, or if there are any hints to doing that myself and submitting the patches back Also, I couldn't find any documentation on writing support for additional devices, is there anything I've missed? Thanks, Dan

2 1

Cisco ASA VPN tunnel monitoring
by Dan Yasny 07 Jul '14

07 Jul '14

Hi all, I m wondering if there are any plans to extend the ASA monitoring module, or if there are any hints to doing that myself and submitting the patches back Also, I couldn't find any documentation on writing support for additional devices, is there anything I've missed? Thanks, Dan

1 0

Re: [Observium] observium Digest, Vol 48, Issue 46
by Kiru Pananthan 07 Jul '14

07 Jul '14

Thanks Tom Laermans noted On Mon, Jul 7, 2014 at 7:00 PM, <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Graph Link (Kiru Pananthan) > 2. Re: Graph Link (Tom Laermans) > 3. average temperature (Simon Smith) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 7 Jul 2014 12:25:03 +0800 > From: Kiru Pananthan <kirup(a)aism.edu.my> > To: observium(a)observium.org > Subject: [Observium] Graph Link > Message-ID: > <CAEax4xXrhHoJnKH7ZaLjkuKgRQSKvOUSiy3E= > 9gZofxaHTejYg(a)mail.gmail.com> > Content-Type: text/plain; charset="us-ascii" > > Dear all > > how do we able to view on observium the up link switch connect to another > switch, like to know port connected to which switch > > -- > > Kind Regards, > > Kirupananthan Yogalingam, > Assistant Manager - ICT > > ---------------------------------------------------------------------------------------------------------- > Australian International School Malaysia (AISM) > No.22 Jalan Anggerik, > The Mines Resort City, > 43300 Seri Kembangan, > Selangor, Malaysia. > > > > > *T:* +60 3 8949 5000 *F*: +60 3 8949 5100 > *E*: kirup(a)aism.edu.my *W*: http://www.aism.edu.my/ > *Direct Line*: +60-3-8949 5030 > > ---------------------------------------------------------------------------------------------------------- > > <https://www.facebook.com/aismalaysia> > <http://www.youtube.com/user/AISMvideos> > <http://www.aism.edu.my/virtualtour> > > -- > *Confidentiality Disclaimer:* This e-mail and any attachments are > confidential and intended solely for the intended addressee and may also be > privileged or exempt from disclosure under applicable law. If you are not > the intended addressee, or have received this e-mail in error, please > notify the sender immediately, delete it from your system and do not copy, > disclose, distribute or otherwise act in reliance upon any part of this > e-mail or its attachments. Australian International School Malaysia and all > affiliates under Taylor's Education Group does not accept responsibility > for any loss arising from unauthorised access to, or interference with, any > internet communications by any third party in reliance to this email, or > from the transmission of any viruses. Please note that any views or > opinions presented in this email are solely those of the author and do not > necessarily represent those of Australian International School Malaysia > and > all affiliates under Taylor's Education Group. Replies to this e-mail may > be monitored by Australian International School Malaysia and all > affiliates under Taylor's Education Group for operational or business > reasons. >

1 0

Graph Link
by Kiru Pananthan 07 Jul '14

07 Jul '14

Dear all how do we able to view on observium the up link switch connect to another switch, like to know port connected to which switch -- Kind Regards, Kirupananthan Yogalingam, Assistant Manager - ICT ---------------------------------------------------------------------------------------------------------- Australian International School Malaysia (AISM) No.22 Jalan Anggerik, The Mines Resort City, 43300 Seri Kembangan, Selangor, Malaysia. *T:* +60 3 8949 5000 *F*: +60 3 8949 5100 *E*: kirup(a)aism.edu.my *W*: http://www.aism.edu.my/ *Direct Line*: +60-3-8949 5030 ---------------------------------------------------------------------------------------------------------- <https://www.facebook.com/aismalaysia> <http://www.youtube.com/user/AISMvideos> <http://www.aism.edu.my/virtualtour> -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

2 1

Network changes
by Kiru Pananthan 05 Jul '14

05 Jul '14

Dear all Recently our team member disconnect our network switch with out labeling the Network cable port no, is there any possibilities to check in observium where the connection from UP switch to disconnected switch -- Kind Regards, Kirupananthan Yogalingam, Assistant Manager - ICT ---------------------------------------------------------------------------------------------------------- Australian International School Malaysia (AISM) No.22 Jalan Anggerik, The Mines Resort City, 43300 Seri Kembangan, Selangor, Malaysia. *T:* +60 3 8949 5000 *F*: +60 3 8949 5100 *E*: kirup(a)aism.edu.my *W*: http://www.aism.edu.my/ *Direct Line*: +60-3-8949 5030 ---------------------------------------------------------------------------------------------------------- <https://www.facebook.com/aismalaysia> <http://www.youtube.com/user/AISMvideos> <http://www.aism.edu.my/virtualtour> -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

1 0

health/overview page is there a way to change what is presented?
by Steve Costaras 05 Jul '14

05 Jul '14

I am using observium community edition to monitor a couple systems. Noticed a couple items that seem to make some of the graphs not too useful. The health / Overview section for file systems is the first. It shows file systems with no problem, however it's graphing the file systems based on their percentage used NOT their used byte size. I don't know how others are using this, but here we grow file systems frequently which this produces graphs like the attached. Is there a way to either change what metric is graphed (bytes/ not percentage) or have a another overview graph of file systems with capacity used. This gets much more important with ZFS when you add new vdev's or expand them as like the graph will expand all filesystems on that pool which doesn't seem to be too useful and there can be hundreds. Another question on the same page is the operations/second graphs. This is displaying data twice or more when you are using device mapper you see both the sd* devices as well as the dm-* devices. This is very bad when you're talking about 100's of physical drives (seeing 200 or more depending on how you have it set up with partitions devices). Is there a way to filter out dm-* devices so only sd* ones are calculated/graphed? Steve

1 0

Interface Traffic trend
by KENNETH D MILLER II 05 Jul '14

05 Jul '14

Is there a config option or change I need to make to get the interface traffic trend option to work? I'm running the latest CE version. RRDtool 1.38 and 1.47 versions. I've only have this running a month, but thought there would be enough data to see a trend. Also, where would I load MIBs and configure OIDs for Brocade VDX gear? Thanks in advance, Ken

2 1

Re-enable host where discovery has been disabled?
by David Lagace 04 Jul '14

04 Jul '14

Hello all, I seem to be in a bit of a pickle. On one of my hosts I enabled the 'Disables polling and discovery' to not have it report while working on it but now I can't seem to find the host to reenable the polling and discovery. I can see reference to it in the 'Delete Devices' page with the caption [disabled] next to it but not anywhere else. Just wondering where or how I can re-enable this host. Thanks for your help, --Dave

2 1

Differing values
by Cardinal-Richards, Emma 04 Jul '14

04 Jul '14

Hi, On (seemingly all) our device port pages I get different values in the legends on the page of graphs vs their respective hover over pop-up graphs? In theory I thought they're showing the same timeframe/data? Regards, Emma

4 7

LDAP Authentication
by Paolo Giustiniani 04 Jul '14

04 Jul '14

Hello, I use ldap to authenticate my users. Unfortunately for the users admin if using ldap, after login there are no graphics and no administrative leave. What can I check? -- ---------------------------------------------------------------------------------------- Rispetta l'ambiente: se non ti è necessario, non stampare questa mail. ---------------------------------------------------------------------------------------- Note in ottemperanza al Decreto Legislativo 196/2003 sulla Tutela dei Dati Personali: Il presente messaggio e gli eventuali allegati sono rivolti unicamente all'attenzione del destinatario ed il relativo contenuto potrebbe avere carattere riservato e ne e' vietata la diffusione in qualunque modo eseguita. Nel caso in cui aveste ricevuto questa mail per errore, Vi invitiamo ad avvertire il mittente al più presto a mezzo posta elettronica ed a distruggere il messaggio erroneamente ricevuto.

6 19

Re: [Observium] Re-enable host where discovery has been disabled?
by Chris Ely 03 Jul '14

03 Jul '14

Go to the device page and click the little cog or gear icon in the top right corner. You can re-enable polling and discovery there. -cely On Thu, Jul 3, 2014 at 1:38 PM, David Lagace <dave(a)deelite.org> wrote: > Hello all, > > I seem to be in a bit of a pickle. On one of my hosts I enabled the > 'Disables polling and discovery' to not have it report while working on it > but now I can't seem to find the host to reenable the polling and > discovery. > > I can see reference to it in the 'Delete Devices' page with the caption > [disabled] next to it but not anywhere else. Just wondering where or how > I can re-enable this host. > > Thanks for your help, > > --Dave > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

6 7

Inquiry
by Lala, Rajiv 02 Jul '14

02 Jul '14

Good Morning, I am interested in purchasing support that will used with the open source version of Observium for my company. How should I proceed in doing so? Thanks, Rajiv Lala Buyer Technology Procurement Corporate Finance Division Phone: 312-338-2759 Mobile: 312-208-8480 rajiv.lala(a)cmegroup.com<mailto:rajiv.lala@cmegroup.com> CME Group 20 South Wacker Drive Chicago, Illinois 60606 www.cmegroup.com<http://www.cmegroup.com/>

3 2

Custom "alias" for port
by Ibrahim Tachijian 02 Jul '14

02 Jul '14

Is there no way to set a custom alias for a given port? I want to set the name to "Peering: XXXX" so that it matches the peering type. The reason is because my ex2500 juniper is not properly sending the "name" of the port via snmp thats configured in the switch. Additionally the EX2500 switch (juniper) is shown as Generic. -- Ibrahim Tachijian Net Sat AB

1 0

Processor, Memory pool and Sensors deleted on Cisco device
by Matthias Cramer 02 Jul '14

02 Jul '14

Hi After doing a "svn update" this evening all proceccors, memory pools and sensors disapeared on a cisco 892 router which I rediscovered manualy after the update, Log: 33m 12s Sensor Sensor deleted: temperature cisco-envmon 6 33m 12s Sensor Sensor deleted: temperature cisco-envmon 5 33m 12s Sensor Sensor deleted: temperature cisco-envmon 4 33m 12s Sensor Sensor deleted: temperature cisco-envmon 3 33m 12s Sensor Sensor deleted: temperature cisco-envmon 2 33m 12s Sensor Sensor deleted: temperature cisco-envmon 1 33m 12s Mempool Memory pool removed: mib cisco-enhanced-mempool-mib, index 1.2, descr C892FSP-K9 (I/O) 33m 12s Mempool Memory pool removed: mib cisco-enhanced-mempool-mib, index 1.1, descr C892FSP-K9 (Processor) 33m 12s Processor Processor removed: type cpm index 1 descr Processor 1 Any idea what caused this? Regards Matthias -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zurich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250

3 7

Re: [Observium] Alert Checker for Netscaler
by Adam Armstrong 01 Jul '14

01 Jul '14

There are no undocumented metrics. You have to request them. :) You can't check a service inside a vserver, as the entities don't work that way. You can, however, check the status of a service independently. Adam. Martin Smith wrote:

1 0

Alert Checker for Netscaler
by Martin Smith 01 Jul '14

01 Jul '14

Hello everyone, How can I find available values to be used with the alerting system for metrics that are not documented in the wiki? http://www.observium.org/wiki/Alerting_Metrics_and_Attributes For example, a service inside a vserver's status changes to "down". Or when the bandwidth per vserver exceeds a specified value? Basically, I'm lost on how to find new metrics and attributes... :[ Thanks in advance for your time, Martin Smith | Network Analyst | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320-257-6607 | 877.797.4700 x170

1 0

Re: [Observium] Uncaught bounce notification
by Adam Armstrong 01 Jul '14

01 Jul '14

Protip guys: If you go on holiday and set a "vacation" autoresponder on an account subscribed to our mailing lists, you will be banned for life. FOR FUCKING LIFE. adam. On 2014-07-01 10:51, mailman-bounces(a)observium.org wrote: > The attached message was received as a bounce, but either the bounce > format was not recognized, or no member addresses could be extracted > from it. This mailing list has been configured to send all > unrecognized bounce messages to the list administrator(s). > > For more information see: > http://postman.memetic.org/cgi-bin/mailman/admin/observium/bounce > > > Return-Path: <vacation(a)skylink.cz> > Received: from localhost (localhost [127.0.0.1]) > by postman.memetic.org (Postfix) with ESMTP id AC3933B9B8 > for <observium-bounces(a)lists.memetic.org>; Tue, 1 Jul 2014 16:51:32 > +0100 (BST) > X-Virus-Scanned: by Amavis+SpamAssassin+ClamAV and more at > postman.memetic.org > Received: from postman.memetic.org ([127.0.0.1]) > by localhost (postman.memetic.org [127.0.0.1]) (amavisd-new, port > 10024) > with ESMTP id ooamX0QotsFU for <observium-bounces(a)lists.memetic.org>; > Tue, 1 Jul 2014 16:51:30 +0100 (BST) > Received: from mailserver.skylink.cz (email.skylink.cz [81.91.221.7]) > by postman.memetic.org (Postfix) with ESMTP id 1FF193B9C4 > for <observium-bounces(a)observium.org>; Tue, 1 Jul 2014 16:51:22 +0100 > (BST) > Received: by mailserver.skylink.cz (Postfix, from userid 8) > id 96CEB4237; Tue, 1 Jul 2014 17:50:38 +0200 (CEST) > From: dvolny(a)ezilly.cz > To: observium-bounces(a)observium.org > Content-Type: text/plain; charset=UTF-8 > Subject: =?UTF-8?B?T24gdmFjYXRpb24gbWVzc2FnZQ==?= > X-Loop: jamcp virtual vacation > Message-Id: <20140701155038.96CEB4237(a)mailserver.skylink.cz> > Date: Tue, 1 Jul 2014 17:50:38 +0200 (CEST) > > Dear sender, > > I am out of the office with limited access to my email. > For urgent operational IT issues please contact the EZilly Helpdesk at > helpdesk(a)ezilly.cz > > Kind regards, > David Volný

4 3

syslog -> cleaning the database...
by Xavier Beaudouin 30 Jun '14

30 Jun '14

Hi There, Looking after a reason why I got soooooo long time to see some firewall I saw that despite the // Syslog stuff $config['enable_syslog'] = 1; $config['syslog_age'] = "1 month"; On configuration, the old syslog informations are not deleted. I created a small php script to clean that (using crontab), do you like to have this contrib ? (It is somewhat easy, but if you don't have time to make that, then, I will be pleased to create a jira with this file). /Xavier

1 0

Odd issue with Syslog collection
by Anthony Mattke 27 Jun '14

27 Jun '14

On a recent install of observium, I’ve noticed some oddities with Syslog collection… Some devices are being collected just fine, but others are not. In the example screenshot included below, my firewall ***10, and one switch ***04 are both being collected just fine. But the switches 75***** and *****50 are not. http://i.imgur.com/nxupFzJ.png One thing I noticed was that someone had turned on “service sequence-numbers” on the ****04 switch. (The ASA has no such feature that I know of.. ) When I disabled this service, the collection stopped working on that device! Example here…http://i.imgur.com/HViWcTk.png Thoughts? Thanks!! -Tony

3 4

ios-xr etc syslog
by Rob VanHooren 26 Jun '14

26 Jun '14

to make it go away, could try getting rid of the "service log sequence numbers" (or whatever exact syntax it is) in the device's ios config if you don't need the sequence numbering for audit, that's easier than trying to hack in a new syslog-ng.conf template. luck, R.

1 0

Syslog parsing: Issue from IOS XR devices
by Senses0 26 Jun '14

26 Jun '14

Hi, I have few devices running Cisco IOS XR. I am sending syslog messages from all devices to Observium. Everything is fine except for the log messages sent by routers running IOS XR. Instead of log Program name, messages sent by XR devices contain an incrementing sequence number, which is being parsed as log Program (Incrementing sequence number being parsed as syslog program = bad. real bad). The actual program name appears much later within the message. I have gone through the sylog configuration guide for XR routers. Couldnt find anything that would alter the message format of what is being sent. I also configured "logging facility syslog" in XR devices, but that didnt resolve the issue. To better explain my situation, I have attached a screenshot. Hopefully it would help. Oh and I am subscriber :) Thanks, Senn

1 0

Windows individual performance counter
by Stefan 26 Jun '14

26 Jun '14

1 0

Re: [Observium] location
by Rob VanHooren 26 Jun '14

26 Jun '14

… DNS LOC records were invented for this? http://en.wikipedia.org/wiki/LOC_record just a thought. R. On Jun 26, 2014, at 7:00, observium-request(a)observium.org wrote: > The location parsing stuff does need looked at a bit more.

1 0

GPS data on Syslocation
by Ciro Iriarte 25 Jun '14

25 Jun '14

Hi! , out of curiosity, is there any prevision to locate devices with actual GPS data, stored in the Syslocation field for example?. Regards, Ciro -- Ciro Iriarte http://iriarte.it --

2 1

Re: [Observium] Syslog from NX-OS device
by Steffen Klemer 25 Jun '14

25 Jun '14

Am Tue, 24.06.2014 um 14:49 schrieb Ole Hansen <oha(a)netic.dk>: > Hi, > > I'm trying to get syslog (using syslog-ng) from some NX-OS devices > into Observium, but so far no luck. > > I'm using the following syslog-ng configuration > > template t_observium { > template > ("$HOST||$FACILITY||$PRIORITY||$LEVEL||$TAG||$YEAR-$MONTH-$DAY > $HOUR:$MIN:$SEC||$MSG||$PROGRAM\n"); template-escape(yes); }; For me it works with destination d_observium { program("/opt/observium/syslog.php" template ("$HOST||$FACILITY||$PRIORITY||$LEVEL||$TAG||$YEAR-$MONTH-$DAY $HOUR:$MIN:$SEC||$MSG||$PROGRAM\n") template-escape(yes)); }; > 10.10.10.10||local7||info||info||be||2014-06-24 16:43:08||Jun 24 > 14:43:07: %SEC-6-IPACCESSLOGP: list flow denied udp > 192.168.10.10(137) -> 192.168.11.10(137), 5 packets ||147696 > 10.10.10.11||local7||notice||notice||bd||2014-06-24 16:43:16||2014 > Jun 24 16:43:16.724 CEST: %SYSMGR-5-CFGWRITE_STARTED: Configuration > copy started (PID 2143).|| I see an ip-addresses instead of a hostname in your first field here. iirc observium can only work with hostnames and especially needs the hostname in the first field to be identical to the one in the database (i.e. with or without FQDN), therefor I set use_dns(yes) and use_fqdn(no) instead of keep_hostname(yes) like it is written in the manual. It total it looks like this for me: options { chain_hostnames(off); flush_lines(0); use_dns(yes); use_fqdn(no); owner("root"); group("adm"); perm(0640); stats_freq(0); bad_hostname("^gconfd$"); }; But you can also set a hostname in nx-os and redefine the logging very fine granular. /Steffen -- Steffen Klemer E-Mail: Steffen.Klemer(a)gwdg.de Tel: +49 551 39 172361 __________________________________________________________________ GWDG Am Fassberg 11, 37077 Göttingen URL: http://www.gwdg.de E-Mail: gwdg(a)gwdg.de Tel.: +49 (0)551 201-1510 Fax: +49 (0)551 201-2150 Geschäftsführer: Prof. Dr. Ramin Yahyapour Aufsichtsratsvorsitzender: Dipl.-Kfm. Markus Hoppe Sitz der Gesellschaft: Göttingen Registergericht: Göttingen Handelsregister-Nr. B 598

2 1

nxos syslog
by Rob VanHooren 24 Jun '14

24 Jun '14

is the nexus' L3 in the global (default) vrf? if *not* then it won't (easily?) work until cisco fixes the (being kind here) "oddball way" that mib exposure happens on the nxos platform. a workaround could be to map out things with snmp contexts that tie in a string per vrf ... but imo that doesn't scale effectively. join the party: go beat up TAC and your sales rep. for how stupid their implementation -- of something pretty fundamental -- is. luck, R. Typogaphical errors courtesy of iPhone

1 0

NXOS vrfs == OID grief
by Rob VanHooren 24 Jun '14

24 Jun '14

it seems vrfs aren't discovered, since the OIDs are not found. this leads to all sorts of unhappiness, since with no ipaddr (mgmt vrf) winds up with no syslog, no routing, no nothing except L2 info. who can I send the walk to? (would rather not post it to the list or jira) thanks, R. [me@host ~] ./discovery.php -h theN7k -m cisco-vrf -d DEBUG! theN7k 135 nxos (cisco) VRFs : DEBUG: SNMP Auth options = -v2c -c 'secretSNMPro' /usr/bin/snmpbulkwalk -v2c -c 'secretSNMPro' -Osqn -m MPLS-L3VPN-STD-MIB -M /opt/observium/mibs 'udp':'theN7k':'161' mplsL3VpnVrfRD .1.3.6.1.2.1.10.166.11.1.2.2.1.4 No Such Object available on this agent at this OID DEBUG: SNMP Auth options = -v2c -c 'secretSNMPro' /usr/bin/snmpbulkwalk -v2c -c 'secretSNMPro' -Osqn -m MPLS-VPN-MIB -M /opt/observium/mibs 'udp':'theN7k':'161' mplsVpnVrfRouteDistinguisher .1.3.6.1.3.118.1.2.2.1.3 No Such Object available on this agent at this OID DEBUG: SNMP Auth options = -v2c -c 'secretSNMPro' /usr/bin/snmpbulkwalk -v2c -c 'secretSNMPro' -Osqn -m MPLS-VPN-MIB -M /opt/observium/mibs 'udp':'theN7k':'161' .1.3.6.1.3.118.1.2.2.1.2 .1.3.6.1.3.118.1.2.2.1.2 No Such Object available on this agent at this OID DEBUG: SNMP Auth options = -v2c -c 'secretSNMPro' /usr/bin/snmpbulkwalk -v2c -c 'secretSNMPro' -Osqn -m MPLS-VPN-MIB -M /opt/observium/mibs 'udp':'theN7k':'161' .1.3.6.1.3.118.1.2.1.1.2 .1.3.6.1.3.118.1.2.1.1.2 No Such Object available on this agent at this OID

2 1

Timeout: No Response from xxxx
by George 24 Jun '14

24 Jun '14

Hi, I have latest observium installed and running on a Ubuntu 12.04.4 server and am trying to add another same Ubuntu server to the observium server. I've set up snmpd on the target host. When I run the snmpstatus command from the observium server I get a Timeour: No Response. I've installed the mibs and everything else according to the docs. I can see in the syslog of the target host that the observium server hits it. I can run successfully snmpstatus on the target host and query itself. I can run snmpstatus successfully from another CentOS server. It works from everywhere except the observium server. There are no firewalls involved. Am I doing anything wrong? What info can I send you to help me debug it. Please help Thanks

2 1

Syslog from NX-OS device
by Ole Hansen 24 Jun '14

24 Jun '14

Hi, I'm trying to get syslog (using syslog-ng) from some NX-OS devices into Observium, but so far no luck. I'm using the following syslog-ng configuration template t_observium { template ("$HOST||$FACILITY||$PRIORITY||$LEVEL||$TAG||$YEAR-$MONTH-$DAY $HOUR:$MIN:$SEC||$MSG||$PROGRAM\n"); template-escape(yes); }; destination d_observium { program("/opt/observium/syslog.php" template (t_observium)); }; Works fine for IOS-devices The output that would be sent to syslog.php i can see by adding: destination d_foo { file("/tmp/foo.log" template(t_observium)); }; and the following output is in my file: 10.10.10.10||local7||info||info||be||2014-06-24 16:43:08||Jun 24 14:43:07: %SEC-6-IPACCESSLOGP: list flow denied udp 192.168.10.10(137) -> 192.168.11.10(137), 5 packets ||147696 10.10.10.11||local7||notice||notice||bd||2014-06-24 16:43:16||2014 Jun 24 16:43:16.724 CEST: %SYSMGR-5-CFGWRITE_STARTED: Configuration copy started (PID 2143).|| any ideas? I've tried uncommenting the debug part of syslog.php, but i don't get any output in /tmp/syslog.out or /tmp/syslog.err Oh, and by the way. Syslog from Fabric-OS devices works fine as well. Netic A/S Ole Hansen Mail: oha(a)netic.dk Mobil: +45 23253747 Fastnet: +45 96356187

1 0

How to use kemp mibs
by Stefan 24 Jun '14

24 Jun '14

2 2

HP-Switch: device traffic graphs of new modules
by Wiethoff, Helge 24 Jun '14

24 Jun '14

Hi all, I have a problem with the "Device Traffic"-Graph in Observium (r5581) since I inserted two modules 22Ports (J9536A) into the backplane of a HP 5406zl. It is not plotted anymore as you can see in the attached device-traffic.png. The Error-Message from RRDTool is: RRDTool Output: ERROR: mmaping file '/srv/observium/rrd/x-fra01.tfhbo.de/port-97.rrd': Invalid argument. The file port-97.rrd is empty, but observium added the Ports yesterday. Eventlog: 23-06-2014 18:37:13 Inventory Inventory added: class port, name Port F22, index 217 .... and so on. Maybe it is just a side-effect: All of the other new Ports, are not plotted, too. Any suggestions? (Except buying a "real" switch... ;-)) Bye, Helge ________________________________ Helge Wiethoff Medienzentrum Telefon: +49 (234) 968 8717 Fax: +49 (234) 968 3453 E-Mail: Wiethoff(a)tfh-bochum.de Technische Fachhochschule Georg Agricola für Rohstoff, Energie und Umwelt zu Bochum Staatlich anerkannte Fachhochschule der DMT-Gesellschaft für Lehre und Bildung mbH Herner Straße 45 44787 Bochum http://www.tfh-bochum.de ________________________________ Träger: DMT-Gesellschaft für Lehre und Bildung mbH Sitz der Gesellschaft: Bochum Registergericht: Amtsgericht Bochum Handelsregister: B 4052 Geschäftsführung: Prof. Dr. Jürgen Kretschmann (Vorsitzender) Manfred Freitag

2 2

ZFS on Ubuntu
by David Peall 23 Jun '14

23 Jun '14

Hi Has anyone got ZFS SNMP data working on Ubuntu, I can’t seem to find any details? Regards — David Peall

5 9

Re: [Observium] Juniper Inventory
by Rutger Bevaart 22 Jun '14

22 Jun '14

What you can do to get the optical levels for 1G interfaces (or 10G interfaces on older FPCs in the M/T) is extend the Juniper MIB and run the commands in Junos using a script. I tried doing this some time ago, just never got it finished. Regards, Rutger

1 0

Juniper Inventory
by Raphael Maunier 22 Jun '14

22 Jun '14

Hello, I wonder if it’s complicated / possible to add in the inventory list the optics count / type / serial … Some time, it’s easier to just ask the noc to look at this webpage and check if it’s a MM/ SM optic and/or the correct lambda for wdm optics. May be a dedicated page / second expand ? ( running latest updated version ) Raphael

4 5

Dragonwave Support
by Keefe John 22 Jun '14

22 Jun '14

Hello, Would it be possible to add support for Dragonwave radios? This would be very similar to the support that was just added for Exalt ExtendAir radios. Thanks! Keefe

2 1

Disable Device Alerting
by Travis Kreikemeier 21 Jun '14

21 Jun '14

I have the new alerting in Observium setup for many events, including device down. However, over some of our wireless links I am getting false positives, so I turned up the ping retries to 3 times. Still happening, so I set the device down delay to 2. That has helped, however I am still getting the old school device alerting system emails. How can I disable those? I have port utilization disabled ($config['alerts']['port_util_alert']), etc. But I can't find anything in any docs or searches for disabling device down alerting in the old alerting system. Any help is appreciated, thanks! TRAVIS KREIKEMEIER

2 3

LDAP authentication and user id mapping (user sees no devices)
by Branzko, Matthias 20 Jun '14

20 Jun '14

Hello all, in the moment I try to switch from mysql to LDAP authentication (AD). The LDAP connection seems to work. I can logon to observium using my LDAP credentials. But the user mapping to permissions does not work. In observium the user sees no devices. The mapping is set as follows: $config['auth_ldap_groups']['Observium_Admin']['level'] = 10; $config['auth_ldap_groups']['Observium_User']['level'] = 1; In Wireshark I could see that the right group (Observium_Admin) was matched. Debug shows something like: SELECT * FROM `entity_permissions` WHERE `user_id` = '-1' SELECT `value` FROM `users_prefs` WHERE `user_id` = '-1' AND `pref` = 'atom_key' What to try next? Thanks, Matthias

1 0

May Changelog
by Adam Armstrong 20 Jun '14

20 Jun '14

It seems that we totally forgot this month, but the May Changelog is up now at http://www.observium.org/wiki/Changelog#May_2014

1 0

Alerting System Status
by Lane Eckley 20 Jun '14

20 Jun '14

Hi Guys, Checking in as to the official status of the alerting system, has it been fully launched at this stage? Thanks! -Lane

2 6

SysobjectID for AIX
by Teixeira, Mike 20 Jun '14

20 Jun '14

Hello, I compiled net-snmp for AIX on my two AIX 5.3 servers. Since doing so the sysobjectid now returns net-snmp.aix rather than one that designates for AIX. I can set the sysobjectid in the snmp.conf. I have been looking for what to set that to so observium knows that it is an AIX server rather than a generic server. Does anyone have the oid that reflects AIX for sysobjectid? Thanks, Mike

3 7

don't show extra sites on port view
by Simon Smith 19 Jun '14

19 Jun '14

Hi All, is it possible to disable the showing of other sites within a port view? look at attachment to understand what i mean We use observium to monitor external ADSL lines and sadly these lines all have the same internal ip address and the observium is showing all the other sites on the same pan port Regards Simon

1 0

No VRFs being discovered on Cisco 3750 Stacks
by Matthew A Harper 19 Jun '14

19 Jun '14

Hi Guys, Recently I've started monitoring some of our edge routers using Observium and have found that VRFs don't appear to get found during discovery. I found an old post from last year where Adam advised that VRF tracking in Observium is currently considered "broken and unstable". (http://comments.gmane.org/gmane.network.observium.general/3159). Here is a snip from a discovery of one of our edge devices running a handful of VRFs: dot1d id ifIndex Port Name Priority State Cost 504 5003 Port-channel3 128 forwarding 3 Cisco Pseudowires : VRFs : SLAs : UCD Disk IO : Discovered in 6.686 seconds I'm guessing this may be a lower priority to devs at the moment but it is something we'd be requiring before we can fully move away from our other unnamed/expensive monitoring solution as we need to enable alerting for BGP instances bound to specific VRFs. If this is still an ongoing issue is this perhaps something we could offer the devs financial incentive in the form of donations to bump the priority a bit? Alternatively if this has since been patched am I doing something wrong? I have the following enabled in my global config (and confirmed on the devices under modules): $config['enable_vrfs'] = 1; cisco-vrf enabled enabled Kind regards, Matt Harper Network Analyst | ICT Operations Information Technology Branch | Department of Transport and Main Roads Floor 4 | Transport House | 230 Brunswick Street | Fortitude Valley Qld 4006 PO Box 673 | Fortitude Valley Qld 4006 P: (07) 30661125 | F: (07) 30662044 E: matthew.a.harper(a)tmr.qld.gov.au<mailto:matthew.a.harper@tmr.qld.gov.au> W: www.tmr.qld.gov.au<http://www.tmr.qld.gov.au/> *********************************************************************** WARNING: This email (including any attachments) may contain legally privileged, confidential or private information and may be protected by copyright. You may only use it if you are the person(s) it was intended to be sent to and if you use it in an authorised way. No one is allowed to use, review, alter, transmit, disclose, distribute, print or copy this email without appropriate authority. If this email was not intended for you and was sent to you by mistake, please telephone or email me immediately, destroy any hardcopies of this email and delete it and any copies of it from your computer system. Any right which the sender may have under copyright law, and any legal privilege and confidentiality attached to this email is not waived or destroyed by that mistake. It is your responsibility to ensure that this email does not contain and is not affected by computer viruses, defects or interference by third parties or replication problems (including incompatibility with your computer system). Opinions contained in this email do not necessarily reflect the opinions of the Department of Transport and Main Roads, or endorsed organisations utilising the same infrastructure. ***********************************************************************

2 1

Billing graphic problems
by Eduardo Schoedler 19 Jun '14

19 Jun '14

Hi, Today we need to change an interface from a billing and the graphics were outdated. Graphic from interface is ok, as you can see in attachment. Thanks in advance. Regards, -- Eduardo Schoedler

2 1

Aruba Instant AP -- No client or AP information
by David Hicks 19 Jun '14

19 Jun '14

Group..... I've added an Aruba Instant AP 115 to Observium. It is graphing the traffic information properly, but the "Number of Clients" and "Number of APs" graphs are completely blank. Thank you for any help you can provide.

3 2

Traffic Accounting - Can't add new Ports (0.14.6.5571)
by Torsten-Sven Urbas 18 Jun '14

18 Jun '14

Good morning, we're unable to add any new ports to bills setup in traffic accounting. We can choose a device under "Add New Port" but the interface dropdown below won't populate at all - it will stay empty. We tested this on chrome and firefox and on various operating systems. Anything known in that regard? Thanks, Torsten -- Torsten-Sven Urbas Head of Network Operation ==== Bitte beachten Sie unsere neuen Rufnummern ==== ProfitBricks GmbH • Greifswalder Str. 207 • D - 10405 Berlin Tel: +49 (30) 57700 8234 • Mobile: +49 (170) 77 38 251 • Fax: +49 (30) 57700 8296 www.profitbricks.de • torsten-sven.urbas(a)profitbricks.com Sitz der Gesellschaft: Berlin. Registergericht: Amtsgericht Charlottenburg, HRB 125506 B. Geschäftsführer: Andreas Gauger, Achim Weiss. Please consider the environment before printing this email.

4 4

Adding an application
by David Peall 18 Jun '14

18 Jun '14

Hi I’m almost done with my application plugin. The RRD’s are there and updating and I’m looking at html/pages/device/apps/app.inc.php and I’m having an issue. I have a dynamic number of graphs, with the same/similar sets of data. I need to call the same script repeatedly in html/includes/graphs/… but perhaps with parameters? Any help is appreciated. Regards — David Peal

3 8

Patch: rancid integration
by Steffen Klemer 17 Jun '14

17 Jun '14

Hey, for me (recent ubuntu) the rancid integration wasn't working quite well. The following patch corrects this: --- showconfig.inc.php.old 2014-06-17 18:05:06.341845752 +0200 +++ showconfig.inc.php 2014-06-17 18:03:08.336048633 +0200 @@ -72,12 +72,12 @@ if ($config['rancid_ignorecomments']) { - $lines = explode('\n',$text); + $lines = explode(PHP_EOL,$text); for ($i = 0;$i < count($lines);$i++) { - if ($lines[$i][0] == '#') { unset($lines[$i]); } + if ($lines[$i][0] == '!') { unset($lines[$i]); } } - $text = join('\n',$lines); + $text = join(PHP_EOL,$lines); } $text = '<pre class="prettyprint linenums">' . PHP_EOL . $text; Steffen -- Steffen Klemer E-Mail: Steffen.Klemer(a)gwdg.de Tel: +49 551 39 172361 __________________________________________________________________ GWDG Am Fassberg 11, 37077 Göttingen URL: http://www.gwdg.de E-Mail: gwdg(a)gwdg.de Tel.: +49 (0)551 201-1510 Fax: +49 (0)551 201-2150 Geschäftsführer: Prof. Dr. Ramin Yahyapour Aufsichtsratsvorsitzender: Dipl.-Kfm. Markus Hoppe Sitz der Gesellschaft: Göttingen Registergericht: Göttingen Handelsregister-Nr. B 598

2 1

Alerting/Entity type changes
by Adam Armstrong 17 Jun '14

17 Jun '14

Hi All, We're bringing some changes soon to how entity types are used, especially in relation to groups and alerts. We're turning each sensor type into its own entity type, so you can now create "Humidity" sensors : http://alpha.memetic.org/~adama/snaps/14-06-16-f2h10.53.png People using alerting, is this as useful as I think it is? Thanks, adam.

5 5

ppp0 and tun0 shown as down
by Pieter De Wit 17 Jun '14

17 Jun '14

Hi List, We currently monitor some dd-wrt devices. Observium is showing tun0 and ppp0 as down. I am guessing this is due to the interface speed set to 0. Is there a way to bypass this check ? It does look a bit weird to have a down interface with traffic on it. We are currently running the community ed. Changing to pro soon. Thanks, Pieter

2 1

Re: [Observium] Overview of VLANs
by Steffen Klemer 17 Jun '14

17 Jun '14

No comment on this? Am Fr, 13.06.2014 um 08:23 schrieb "Klemer, Steffen" <steffen.klemer(a)gwdg.de>: > Hey everybody, > > in nedi there is a nice feature where I can see all devices (and > ports) with a specific vlan on a map. Is there any similar feature in > observium which I just missed to find? > > Would it be possible to extend the search on the ports-page to also > specify VLANs? Would you accept external patches for stuff like this? > > I also wrote a small extension for querying the number of active > connections on a FWSM (and possibly ASA). Is there interest to get > this upstream? /Steffen -- Steffen Klemer E-Mail: Steffen.Klemer(a)gwdg.de Tel: +49 551 39 172361 __________________________________________________________________ GWDG Am Fassberg 11, 37077 Göttingen URL: http://www.gwdg.de E-Mail: gwdg(a)gwdg.de Tel.: +49 (0)551 201-1510 Fax: +49 (0)551 201-2150 Geschäftsführer: Prof. Dr. Ramin Yahyapour Aufsichtsratsvorsitzender: Dipl.-Kfm. Markus Hoppe Sitz der Gesellschaft: Göttingen Registergericht: Göttingen Handelsregister-Nr. B 598

1 0

Re: [Observium] Observium] Alerting/Entity type changes
by Adam Armstrong 17 Jun '14

17 Jun '14

Yeah, you are confused. Humidity is an example. Rather than alerts being created for 'sensors' they can now be created for 'temperature' or other sensor types directly. Also, humidity is important in a data centre environment, and is monitored by a lot of environmental monitoring systems along with temperature. Adam. Simon Smith wrote: Hi Admin, what would you use the Humidity sensor for? i throught the whole idea of Observium was to monitor Networks and Servers ??? or have i completely got the wrong end of the stick ? Regards Simon On 16 Jun 2014, at 22:48, Adam Armstrong <adama(a)memetic.org> wrote: > Hi All, > > We're bringing some changes soon to how entity types are used, especially in relation to groups and alerts. > > We're turning each sensor type into its own entity type, so you can now create "Humidity" sensors : > > http://alpha.memetic.org/~adama/snaps/14-06-16-f2h10.53.png > > People using alerting, is this as useful as I think it is? > > Thanks, > adam. > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

apc power switch
by Simon Smith 16 Jun '14

16 Jun '14

Hi all, We currently use an old APC power switch to remotely switch servers on and off and the observium can detect its an APC :-) however i don’t get any graphs for it ? no power usage? no temperature ? nothing ? is the any form of graphs i could get outta it for use with the observium ? the web card is an old AP9606 and the unit is an AP9212 Regards Simon

3 6

DRBD with Unix Agent, doesn't show data on Graphics
by Ximena Cardinali 16 Jun '14

16 Jun '14

Hello, I have implemented the DRBD with the Unix Agent on one of the nodes of our Storage Cluster but sadly I cannot see any Info on the Graphics in Observium. Agent is running ok on the Server. I've also manually run the drbd script on the Server, and I actually get some info. Is there anything that I'm missing to configure on the monitored node? Do I need any particular additional configuration? Here is the output of the script on the server: ;---------- drbd1: SecConUpT, drbd2: SecConUpT, drbd3: SecConUpT, drbd4: SecConUpT, drbd5: SecConUpT, drbd6: SecConUpT, drbd7: SecConUpT, drbd8: SecConUpT, drbd9: SecConUpT, drbd10: SecConUpT, drbd11: SecConUpT, drbd12: SecConUpT, drbd13: SecConUpT, drbd14: SecConUpT, drbd15: SecConUpT, drbd16: SecConUpT, drbd17: SecConUpT, drbd18: SecConUpT, drbd19: SecUncUpT, drbd21: SecConUpT, drbd22: SecConUpT|ns=0|nr=105240328|dw=105240328|dr=0|al=0|bm=685|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=358431024|dw=358431024|dr=0|al=0|bm=12804|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=1400615948|dw=1400615948|dr=0|al=0|bm=31995|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=324175284|dw=324175284|dr=0|al=0|bm=12796|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=209573664|dw=209573664|dr=0|al=0|bm=31996|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=1428176220|dw=1428176220|dr=0|al=0|bm=15999|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=629091580|dw=629091580|dr=0|al=0|bm=16002|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=41382196|dw=41382196|dr=0|al=0|bm=31999|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=1576124856|dw=1576124856|dr=0|al=0|bm=51194|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=75854484|dw=75854484|dr=0|al=0|bm=31997|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=1663257472|dw=1663257472|dr=0|al=0|bm=16001|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=486811636|dw=486811636|dr=0|al=0|bm=31997|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=1700698668|dw=1700698668|dr=0|al=0|bm=31981|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=314575488|dw=314575488|dr=0|al=0|bm=19200|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=1729119028|dw=1729119028|dr=0|al=0|bm=31993|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=21851228|dw=21851228|dr=0|al=0|bm=44796|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=305119416|dw=305119416|dr=0|al=0|bm=12800|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=308338344|dw=308338344|dr=0|al=0|bm=12800|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=120016416|dw=120016416|dr=0|al=0|bm=6405|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=75605064|dw=75605064|dr=0|al=0|bm=3200|lo=0|pe=0|ua=0|ap=0|oos=0|ns=0|nr=981644564|dw=981644564|dr=0|al=0|bm=31856|lo=0|pe=0|ua=0|ap=0|oos=0| ;---------- And here is a Screenshot of one of the Graphics with no Info: BTW, I run the poller manually a few times. I will appreciate some insight on this one. Cheers, X.

1 1

Ubiquiti Support
by Keefe John 15 Jun '14

15 Jun '14

Hello, Would it be possible to support the new Ubiquiti MIB? That is really the only thing holding me back from buying the paid version. Thanks! Keefe John Ethoplex

4 7

Re: [Observium] TZ
by Adam Armstrong 15 Jun '14

15 Jun '14

Wait until the time catches up with where it was before you changes time zone. Enjoy your giant spikes. Adam. Frank Lahr wrote:

1 0

TZ
by Frank Lahr 15 Jun '14

15 Jun '14

Hey, I noticed an Observium server had the wrong timezone. I set it to the correct tz, but now all my graphs for all my devices are not updating anymore (blank from the time I switched the tz). Polling and Discovery are fine. How to fix the issue? Thanks -- Frank

1 0

Smokeping, Rancid and Observium
by Teixeira, Mike 13 Jun '14

13 Jun '14

Yeah you are hijacking a thread, but whatever. I'll change the subject line and start a new thread :) I have rancid and websvn running on the same box. That box is separate from observium. I did this because I wanted rancid to run on a vm. Having it on a VM gives me somewhat of redundancy. Depending on the number of threads and number of devices you give rancid, it could interfere with observium. The server that runs observium comes into play as well. The more devices and more ports you have, the more threads you need. Observium is much more important to me than rancid; however, rancid is really important. That is another reason why I separated them. Then I have an NFS mount between rancid and observium so it can see rancid. I don't have a history of configurations in observium. I am not sure how that works. That's where websvn excels. With websvn the network guys can see what changed between revisions. So with websvn, I didn't spend much time on setting up history of configuration changes in observium. I haven't setup smokeping. The network guys always tell me they don't care about icmp testing to determine latency. Mainly because some routers/switches, that participate in QoS, will make icmp lowest priority and put the router traffic, voice traffic, and sometimes video traffic (depending on the device) higher priority. The part that I love though is when I am working with them to troubleshoot a network problem, they want a trace route. I always say to them well I thought you didn't care about icmp and trace route uses icmp. :) Inside observium in the graph section of the device in the subsection of poller, it shows icmp response. I think that is enough for me and the network guys. Mike From: observium [mailto:observium-bounces@observium.org] On Behalf Of Peter Casserly Sent: Friday, June 13, 2014 8:03 AM To: Observium Network Observation System Subject: Re: [Observium] Rancid can't get CVS working For those using a WebSVN or similar application: Are you running that on a separate server or all on the same server? I have Observium and rancid running fine but want to add SmokPing and WebSVN. I don't want to create a mess running too many services running on one server. Looking for feedback on best practices/success vs. failure stories. Apologies in advance if this reply is off topic or hijacking the thread.

2 1

Unbound graphics
by Eduardo Schoedler 13 Jun '14

13 Jun '14

Hi people, Can you provide support for total current users for Unbound? # unbound-control stats | grep 'total.requestlist.current.user' total.requestlist.current.user=14242 Thanks! -- Eduardo Schoedler

1 0

Rancid can't get CVS working
by Benoit Lambert 13 Jun '14

13 Jun '14

I have a working installation of rancid and I can see the current configuration of my devices. Question: How do I view the old configurations (previous versions). I noticed when I view the config it says "Latest"....I'm assuming I can set it up to view old configs. Just don't know how.

4 3

Overview of VLANs
by Steffen Klemer 13 Jun '14

13 Jun '14

Hey everybody, in nedi there is a nice feature where I can see all devices (and ports) with a specific vlan on a map. Is there any similar feature in observium which I just missed to find? Would it be possible to extend the search on the ports-page to also specify VLANs? Would you accept external patches for stuff like this? I also wrote a small extension for querying the number of active connections on a FWSM (and possibly ASA). Is there interest to get this upstream? lg /Steffen -- Steffen Klemer E-Mail: Steffen.Klemer(a)gwdg.de Tel: +49 551 39 172361 __________________________________________________________________ GWDG Am Fassberg 11, 37077 Göttingen URL: http://www.gwdg.de E-Mail: gwdg(a)gwdg.de Tel.: +49 (0)551 201-1510 Fax: +49 (0)551 201-2150 Geschäftsführer: Prof. Dr. Ramin Yahyapour Aufsichtsratsvorsitzender: Dipl.-Kfm. Markus Hoppe Sitz der Gesellschaft: Göttingen Registergericht: Göttingen Handelsregister-Nr. B 598

1 0

Latency alert check
by Eduardo Schoedler 12 Jun '14

12 Jun '14

Hi people, How can I use alert checks to monitor host latency? Thanks in advance. Regards, -- Eduardo Schoedler

3 3

Pagination of Ports > Customers
by Senses0 12 Jun '14

12 Jun '14

Hi, Currently I have about 100 devices and 8000+ ports (dot1q sub interfaces, pseudowires, etc). I don't have any performance issues. But... Currently I have 300+ interfaces classified as "customer". It takes about 9 seconds for the page to load because everything get loaded all at once. My actual customer interfaces would easily exceed 1000. Is there a way I can paginate Ports > Customers? Much like how it's presented in Ports > All Ports? Or is this something that is currently not possible? Thanks

1 0

Rancid SVN diffs not showing
by Benoit Lambert 12 Jun '14

12 Jun '14

I set Rancid up with SVN instead, but when I make a change and re-run "rancid-run" there is still only the "Latest" tab in observium. I know that observium only goes into the directory and retrieves the configurations and displays it, but how do I display the older version? Rancid configs need to have identical names to the host devices in observium.... If I point observium to search for configs in "$config['rancid_configs'][] = '/usr/local/rancid/var/networking/configs';" how does it know which is old and new? Or is there something I'm missing?

2 1

spanning-tree information
by Stefan Milo 12 Jun '14

12 Jun '14

Hi Is it possible to see spanning-tree information in observium? Just the usual stuff like root bridge, forwarding, discarding etc. I have a mix of cisco and hp switches, but i can't seem to find the stp tab anywhere... BR Stefan Milo

7 12

Custom Groups of Ports
by Martin Smith 11 Jun '14

11 Jun '14

I love when I have an problem and someone already resolved it, but it was left out of documentation. Could someone please put the following into the default.inc? //$config['int_groups'] = array("EsxData","EsxMgmt","EsxiSCSI","EQL","Mgmt","LAGs","PI","DRAC"); \\Add<file:///\\Add> custom port groups to top menu as defined in Interface_Description_Parsing Found here: http://jira.observium.org/browse/OBSERVIUM-299 Thank you, Martin Smith | Network Analyst | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320-257-6607 | 877.797.4700 x170

1 0

Rancid SVN diffs not showing
by Benoit Lambert 11 Jun '14

11 Jun '14

I set Rancid up with SVN instead, but when I make a change and re-run "rancid-run" there is still only the "Latest" tab in observium. I know that observium only goes into the directory and retrieves the configurations and displays it, but how do I display the older version? Rancid configs need to have identical names to the host devices in observium.... If I point observium to search for configs in "$config['rancid_configs'][] = '/usr/local/rancid/var/networking/configs';" how does it know which is old and new? Or is there something I'm missing? Thanks in advance for any help! Much appreciated!

1 0

Clear eventlog
by Nick Beacham 11 Jun '14

11 Jun '14

Is there a simple way to clear the eventlog? Thank you, Nicholas Beacham Desk: 515-369-7121 Cell: 515-865-3700

1 0

Mikrotik number of client on WiFi interface
by Franjo Posavec 11 Jun '14

11 Jun '14

It will be great if there will be support for number of clients on mikrotik wifi access point do you have in plans to support this? best regards, -- Franjo Posavec system administrator entitas d.o.o. T: +385 (0)40 600 002 S: franjo.posavec

2 5

apc powernet-mib
by Simon Smith 10 Jun '14

10 Jun '14

Hi, i have been able to get ahold of a new version of the PowerNet-MIB thats used for the APC power units if anyones interested :) also could someone update the svn with the new mib file aswell ? ftp://ftp.apc.com/apc/public/software/pnetmib/mib/411/powernet411.mib Regards Simon

2 1

Observium Gone Crazy, bro?
by Ryan Milton 09 Jun '14

09 Jun '14

Hi All, I have an unusual issue in that after the last two updates (not that it was as a result), that Observium slams me with some 3000 "up/down" messages of all the devices in my network. The emails all come in a flood over a couple of minutes. Is there any reason that this should occur within Observium? Thanks, Ry

2 1

monitor mdadm
by Simon Smith 08 Jun '14

08 Jun '14

Hi All, does observium monitor MDADM as yet? im about to setup a few machines with software raid via linux’s MDADM Regards Simon

1 0

Re: [Observium] observium does not work with recent versions of MySQL
by Steffen Klemer 07 Jun '14

07 Jun '14

Am Fri, 06.06.2014 um 19:17 schrieb Tom Laermans <tom.laermans(a)powersource.cx>: > This has indeed come up a few years ago already and is effectively a > non-mysql-default strict setting. > Are you sure this is not an OpenSuSE config default? It might also be an OpenSUSE default. I read somewhere that this would be a 'feature' of recent versions of mysql. I could only get rid of it with an explicit sql-mode="" in my.cnf whereas I couldn't find another config file anywhere on the system. But wouldn't it make more sense to just add a default value of "0" to all columns? I mean in the long run. /Steffen -- Steffen Klemer E-Mail: Steffen.Klemer(a)gwdg.de Tel: +49 551 39 172361 __________________________________________________________________ GWDG Am Fassberg 11, 37077 Göttingen URL: http://www.gwdg.de E-Mail: gwdg(a)gwdg.de Tel.: +49 (0)551 201-1510 Fax: +49 (0)551 201-2150 Geschäftsführer: Prof. Dr. Ramin Yahyapour Aufsichtsratsvorsitzender: Dipl.-Kfm. Markus Hoppe Sitz der Gesellschaft: Göttingen Registergericht: Göttingen Handelsregister-Nr. B 598

2 1

observium does not work with recent versions of MySQL
by Steffen Klemer 06 Jun '14

06 Jun '14

Hey everybody, I don't know whether this already came up, but with recent versions of mysql (like in the latest openSUSE) many features (VLANs, Ports, Routing, Events) of observium are no longer accessible. This is because of a new default "sql_mode = strict_trans_tables" which don't longer allow constructs like INSERT INTO `ports-state` (`port_id`) VALUES ('4713') in tables without default values for the other columns. The solution was a sql-mode="" in my.cnf. I suppose this will sooner or later also hit Debian/ Ubuntu. Perhaps you might fix this in one of the following versions? Otherwise observium over fulfilled all my needs and wishes. Thank you for this wonderful piece of software! cheers /Steffen -- Steffen Klemer E-Mail: Steffen.Klemer(a)gwdg.de Tel: +49 551 39 172361 __________________________________________________________________ GWDG Am Fassberg 11, 37077 Göttingen URL: http://www.gwdg.de E-Mail: gwdg(a)gwdg.de Tel.: +49 (0)551 201-1510 Fax: +49 (0)551 201-2150 Geschäftsführer: Prof. Dr. Ramin Yahyapour Aufsichtsratsvorsitzender: Dipl.-Kfm. Markus Hoppe Sitz der Gesellschaft: Göttingen Registergericht: Göttingen Handelsregister-Nr. B 598

3 2

mikrotik ip add/remove not working
by Simon Smith 06 Jun '14

06 Jun '14

Hi people, we have a mikrotik unit that we monitor and we have a PPPOE interface on it, that we monitor the PPPOE interface sadly drops every so often and the IP on it changes … ( I know dynamic ip for pppoe is bad, we are in process of sorting out a static ip ) but for some reason the observium, doesn’t notice the interface ip was removed then readded or even changed !? it notices that the interface is offline and alerts me… but not the IP change or re-add can someone look into this, or tell me where i could begin looking to find the problem regards Simon

2 1

observium.log file rotate
by Simon Smith 06 Jun '14

06 Jun '14

Hi All, i have created a request for a feature http://jira.observium.org/browse/OBSERVIUM-872 observium.log file rotate yes i can set it up manually to do it via webmin but would be easier if observium did itself… regards Simon

3 4

System snmpEngineID changed
by Simon Smith 06 Jun '14

06 Jun '14

Hi All, hoping someones got some light on this error i’m seeing every so often... I monitor one of our Mailcleaners (http://www.mailcleaner.org) and every time I restart the mailcleaner service or the mailcleaner itself i get the following message in Observium System snmpEngineID changed: 80001F8880BF0033479D178E5300000000 -> 80001F8880DC0B531E1F92915300000000 (probably the device was replaced). The device will be rediscovered. if i look in my snmpd.conf all i see is the following com2sec local 127.0.0.1 mailcleaner com2sec local X.X.X.X mailcleaner com2sec local 127.0.0.1 mailcleaner group MyROGroup v1 local group MyROGroup v2c local group MyROGroup usm local view all included .1 80 access MyROGroup "" any noauth exact all none none exec getmsgs /usr/mailcleaner/bin/get_today_stats.pl -m exec getspams /usr/mailcleaner/bin/get_today_stats.pl -s exec getbytes /usr/mailcleaner/bin/get_today_stats.pl -b exec getvirus /usr/mailcleaner/bin/get_today_stats.pl -v exec getstatus /usr/mailcleaner/bin/get_status.pl -s exec getspools /usr/mailcleaner/bin/get_status.pl -p exec getload /usr/mailcleaner/bin/get_status.pl -l exec getdisks /usr/mailcleaner/bin/get_status.pl -d exec getmem /usr/mailcleaner/bin/get_status.pl -m exec getstats /usr/mailcleaner/bin/get_today_stats.pl -B perl push (@INC, "/usr/mailcleaner/lib"); require SNMPAgent; SNMPAgent->init(); syslocation XXXXX syscontact XXXXX disk / 100000 disk /var 100000 #This line allows Observium to detect the host OS if the distro script is installed ( ADDED MANUALLY ) extend .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro Anyone have any ideas how I can clear this error or get rid of it ? Regards Simon

2 1

Observium Subscription on RHEL
by Cardinal-Richards, Emma 06 Jun '14

06 Jun '14

Hi, If we were thinking of moving to the subscription service with some service options for feature development etc but our VM infrastructure is RHEL would we be unable to get the development service as the OS is unsupported or is it just the installation process that's unsupported? Regards, Emma

3 3

Observium Subscription
by Jeremy Alberts 06 Jun '14

06 Jun '14

Hello, I wanted to upgrade to Observium Profesional. I dont want to use PayPal, but want to use a credit card. The problem is that thats not possible from The Netherlands. What to do? Kind Regards, Jeremy

4 5

Cannot add hosts
by RYAN M. vAN GINNEKEN 06 Jun '14

06 Jun '14

I am having trouble adding hosts root@Observium:/opt/observium# ./add_device.php sun.solar.lan public v2c Observium v0.14.4.5229 Add Device(s) Try to add sun.solar.lan: Trying v2c community public ... No reply on community public using v2c. Could not reach sun.solar.lan with given SNMP community using v2c. Devices skipped: 1. NOTE i know form the docs that hostnames are important so i thought i would send this info too nslookup sun.solar.lan Server: 10.0.0.110 Address: 10.0.0.110#53 Name: sun.solar.lan Address: 10.254.254.254 Computer King CaN-Mail Surveillance King http://computerking.ca http://canmail.org http://surveillanceking.net Surveillance - Sales Service - Hosting Backup Internet Based Surveillance Systems Custom Service Pac kages Secure IMAP Email - Automated Remote Backups - Photo Blogs - Online ERP and Accounting Packages

2 1

MongoDB graph
by Beruben, Daniel 05 Jun '14

05 Jun '14

Hello Team, Do we have something in the pipe about to graph mongodb with observium ? If not Can I open a request for that ? Thx http://docs.mongodb.org/manual/tutorial/monitor-with-snmp/ Daniel

2 1

professional version
by Александр Горбачев 05 Jun '14

05 Jun '14

Hi! I'm using comunity based version and I'm really like it. But I want to try professional version with all new features. There is the question - I'm working for 2 companies, so can I purchase professional version and use it as 2 different instances in each company I've working in? Best regards! -- С уважением, ведущий инженер ООО "Виндекс Сервис" Горбачев Александр

3 2

DNS Aliases
by Cardinal-Richards, Emma 04 Jun '14

04 Jun '14

Hi, I understand that Observium needs the hostnames to be valid, so we tweaked our hosts file with a regex to add an alias to match the device hostnames (as our initial names had some extra info in the names not on the hosts). But this appears to allow me to add devices manually but autodiscovery doesn't seem to be working. Does Observium need it to be the 'main' resolvable hostname rather than an alias? Regards, Emma

3 7

Billing View display issue
by Spencer Gaw 03 Jun '14

03 Jun '14

Hey all, We made a topographical change to a portion of our network last night - to be specific, we separated a large fiber ring into two smaller rings. After this change was made, the Billing View in Traffic Accounting is not displaying new data. Here's the kicker, the data is there; 24 Hour View and Monthly View display as expected. It seems to only affect the Billing View - screenshots attached. This isn't so much of a problem, just an oddity that I noticed. Anyone have a theory here? Regards, SG

2 3

UNIX Agent won't work
by Christian Becker 03 Jun '14

03 Jun '14

Hi There, I’ve installed UNIX Agent on a Debian system and was able to telnet the agent from my observium system: A part of the Telnet-Response: **** <<<netctr>>> 1400773673 lo 287442552 471313 0 0 0 0 0 0 287442552 471313 0 0 0 0 0 0 eth1 89487928 532097 0 7300 0 0 0 0 0 0 0 0 0 0 0 0 eth0 449561362 4730635 0 15 0 0 0 0 831621260 862556 0 0 0 0 0 0 <<<postfix_mailq>>> Mail queue is empty <<<local>>> 1 0 1 0 12159 **** But the poller only returns this result: Observium UNIX Agent: execution time: 165ms No include: No include:Observium No include:df No include:mounts No include:ps No include:mem No include:cpu No include:uptime No include:lnx_if:sep(58) No include:tcp_conn_stats No include:md No include:diskstat No include:kernel No include:netctr No include:postfix_mailq No include:local Has anyone an idea, why he can’t gather information? Best regards Chris

2 5

Cisco WLC monitoring
by Сережка Хомяков 03 Jun '14

03 Jun '14

Hi all! I know, this is a pretty discussed topic, but from this discussions plans and current state of Cisco's WLC monitoring are not obvious. When I've tried to add it to Observium, it wa correctly identified as Wi-Fi device type, but only device traffic and system temperature are shown on the main page, no CPU, memory are available. WLC model is 2106. Can anyone plaese clarify this? --- Best, Sergey Homyakov

3 4

Re: [Observium] 4k
by Rob VanHooren 03 Jun '14

03 Jun '14

imo, 1920 will be common for quite a while yet. any chance you can make the scaling formulaic, based on a config parameter? that way you only have to do it once, forever. (bonus: mbp folks are happy, you can be lazy when 8k shows up, etc…) R. On May 27, 2014, at 1:56, observium-request(a)observium.org wrote: > Hi All, > > Are any of you running 4k displays yet? > > We've been thinking about how to handle larger displays and were > considering jumping straight from the existing 1280px wide to 3840px > rather than building a 'widescreen' mode on 1920px. > > I think it would be most noticeable in the amount and resolution of the > graphs we could display. We could effectively fit twice the amount of > data into each graph. It would probably require quite a lot of work, so > it's important we get the resolution correct! > > (no, i don't care about your macbook pro's silly resolution) > > adam.

7 11

PostgreSQL Application monitoring
by David Peall 03 Jun '14

03 Jun '14

Hi I want to monitor Postgres servers and was wondering the best way to go about this. On the master server there are several clusters each with a number of databases. On the replication servers the same exists but I’d like to monitor the streaming replication delay. I’m just wondering what the best layout would be to bring the data into Observium? Regards — David Peall

3 3

Windows Eventlogs and Observium Syslogs
by Jeremy Alberts 03 Jun '14

03 Jun '14

Hello, At the moment I am receiving Windows Eventlogs in Observium by using the Correlog Syslog agent. Is anybody else using something similar? Are there other ways to accomplish this? Kind Regards Jeremy Alberts

5 4

MIB files to compile?
by Ray, Bjoern Karsten 02 Jun '14

02 Jun '14

Hi there, this may sound a bit stupid but I need to know this for sure: MIB files in Observium don't have to be compiled but to be available under /opt/obersium/mibs/ or(!)/opt/obersium/mibs/[vendor]? Background is a strange feeling that some MIBs are not used at all - so the second question is: how to validate that Observium uses the correct ones so I can verify either that I've done something incomplete or the affected MIBs are not valid or incomplete at all. Thanks in advance! Björn

3 4

Palo Alto New MIBs
by Chip Pleasants 02 Jun '14

02 Jun '14

Hi All, I'm wondering if there is being work done or if its on a to do list to add the new MIB attributes for Palo Alto firewalls? There are a few new VPN OID's we'd like to monitor. Let me know if this a donation topic, and feel free to contact me privately. Thanks, Chip

2 2

ricoh toner level 150%
by Simon Smith 02 Jun '14

02 Jun '14

Hi, i think i might have found a bug with SNMP and ricoh printer? for some reason the panel is showing toner levels for our Ricoh MP C4000 are all 150%... i didnt realise i had a special printer with extra toner :P where should i be looking for this bug? when i do an snmpwalk on the printer, i cant find any value thats 150% Regards SASmith Simon Smith --------------------------------------- Administrator of zeplin.co.uk ---------------------------------------

3 4

Graphing Apple Airport traffic
by Steve Evans 01 Jun '14

01 Jun '14

Firstly, I have to say how impressed I am with the clean, purposeful implementation of Observium. One of the main reasons I was looking for such an SNMP network manager was to monitor my four apple airport base stations. Whilst Observium recognises such devices, and graphs the wirelessNumber from the AIRPORT-BASESTATION-3-MIB if does not graph the corresponding physicalInterfacesTable traffic. Whilst the ifTable is graphed this doesn't actually include the wireless connections. This information would be very useful to determine how many packets are being passed on the wireless interface and at what speed. I've yet to dig into the structure of the code much, but presumably the physicalInterfacesTable could be logged/graphed using code very similar to that used for the ifTable. Something that would also be very useful, would be to list the currently attached clients which could be reported in a similar manner to the ARP/NDP Table using information sourced from the wirelessClientsTable to display MAC address and speed/signal strength/noise. This information could be instantaneous rather than logged as the airport base stations appear not to actually return the number of packets passed despite the MIB supporting this. This looks like the simpler task. Finally, some might be interested in the DHCP allocations, but as I run all my base stations in bridged mode that wouldn't be of interest to be. So, before I start looking at the code, I thought I should ask if anybody is already looking into this? Thanks, Steve

3 15

Re: [Observium] About IfAlias max length
by Adam Armstrong 30 May '14

30 May '14

Your question makes no sense... Paolo Giustiniani wrote:

3 6

Geocoding debugging help
by Chris Moody 30 May '14

30 May '14

Howdy folks. Can anyone please help provide me some syntax to try debugging the geocoding calls that place devices properly on the map? I'm running 2 installations[Observium CE 0.13.10.4586]: - 1 test host (geocoding works great) - 1 production host (geocoding isn't working) The prod host is behind proxies whereas the test host is not, so I'm next to 110% positive that this is what's preventing the geocoding calls from functioning, but I could use a hand in how to further debug the details of where/how it's failing. I've specified the proxy server details in the config.php file, but am not confident that connections are actually getting through. It's quite possible that the geocoding URLs are not currently permitted through the proxies. I need some more ammo though to go back to my proxy admins so that I can get their help in permitting this connectivity if it's denied. Are thereany commands I can run or debugging flags I can toggle to help extract more details? I've tried both the mapquest & google provider to no avail, so need to get deeper under the hood to troubleshoot further. Any insights or suggestions are greatly appreciated. Cheers, -Chris

4 3

Re: [Observium] Geocoding debugging help
by Chris Ely 29 May '14

29 May '14

You could tcpdump on both the prod and tests hosts then show the results to your proxy admins. Best Regards, Chris Ely On Thu, May 29, 2014 at 1:43 PM, Chris Moody <chris(a)node-nine.com> wrote: > Howdy folks. > > Can anyone please help provide me some syntax to try debugging the geocoding > calls that place devices properly on the map? > > I'm running 2 installations [Observium CE 0.13.10.4586]: > - 1 test host (geocoding works great) > - 1 production host (geocoding isn't working) > > The prod host is behind proxies whereas the test host is not, so I'm next to > 110% positive that this is what's preventing the geocoding calls from > functioning, but I could use a hand in how to further debug the details of > where/how it's failing. I've specified the proxy server details in the > config.php file, but am not confident that connections are actually getting > through. It's quite possible that the geocoding URLs are not currently > permitted through the proxies. I need some more ammo though to go back to > my proxy admins so that I can get their help in permitting this connectivity > if it's denied. > > Are there any commands I can run or debugging flags I can toggle to help > extract more details? > > I've tried both the mapquest & google provider to no avail, so need to get > deeper under the hood to troubleshoot further. > > Any insights or suggestions are greatly appreciated. > > Cheers, > -Chris > >

1 0

About graphic sum
by Paolo Giustiniani 29 May '14

29 May '14

Hello, are new and observium use to monitor traffic connections dsl. I need to add some traffic graphs selected by me. is it possible?

3 5

disable Geo-View
by Stefan 29 May '14

29 May '14

2 1

About IfAlias max length
by Paolo Giustiniani 29 May '14

29 May '14

Hello, how can set max length in ifAlias / description in Observium? Thanks

1 0

Device status changed to Down (snmp)
by overige＠vanderpoel.com.au 29 May '14

29 May '14

Hi, I recently installed Observium CE and noticed some very weird behavior. Observium monitors currently 3 devices: 1 Debian Server + 1 Debian workstation + 1 Ubuntu workstation. The Debian workstation is shutdown overnight and rebooted in the morning, nicely shown in the Event logging: Shutdown: *<date time> System Device status changed to Down (ping)* Reboot: *<date time> System Device status changed to Up <date time> Reboot Device rebooted after <hours min sec> * That's all fine. But now the weird thing is that for the Server the Event log says almost at the same time: *<date time> System Device status changed to Down (snmp)* and when the workstation is rebooted, the Server Event log says at almost the same time: *<date time> System Device status changed to Up* Graphs for the server don't get updated/have data for the time the Debian workstation is down. The Ubuntu workstation runs 24/7 and graphs get properly updated during time the Debian workstation is down. I would expect that what happened with the workstation should have no effect on the data collection of the Server. Details: Observium CE 0.14.4.5229 OS Debian 7 (Server + Workstation) Ubuntu 10.40 LTS (Workstation 24/7) How do I get this working properly? Thanx, Pieter

3 3

svn 5536 apache 500?
by Norman Todd 29 May '14

29 May '14

is anyone else seeing a 500 apache error and blank login after upgrade to 5536? im not seeing anything in the logs to suggest errors, and it was working fine prior to upgrade last entry in observium.log is just prior to upgrade machine is ubuntu precise running observium on amazon ec2 beautifully. if I’m alone on this it must be the machine/instance thanks in advance NT

1 0

SNMP Trap Receiver?
by Hamilton, Kent 28 May '14

28 May '14

Any plans for adding an SNMP trap and/or syslog receiver and correlating events with the correct devices? ________________________________ This e-mail and any documents accompanying it may contain legally privileged and/or confidential information belonging to Exegy, Inc. Such information may be protected from disclosure by law. The information is intended for use by only the addressee. If you are not the intended recipient, you are hereby notified that any disclosure or use of the information is strictly prohibited. If you have received this e-mail in error, please immediately contact the sender by e-mail or phone regarding instructions for return or destruction and do not use or disclose the content to others.

2 1

Odd issue with recent update - UnpingableRRD & UnpingableMySQL
by Andrew Davis 28 May '14

28 May '14

All, We’ve been running Observium on Ubnutu 12.04 for a little over a year now, and after applying the latest community update, we seem to have devices periodically reporting as down. The error I’m getting is bouncing between UnpingableMySQL and UnpingableRRD. With debug enabled, this is an example of what we’re seeing: /poller.php -h itups03-02.net.internal Observium v0.14.4.5229 Poller Starting polling run: SQL[SELECT `device_id` FROM `devices` WHERE `disabled` = 0 AND `hostname` LIKE 'itups03-02.net.internal' ORDER BY `device_id` ASC] SQL[SELECT * FROM `devices` WHERE `device_id` = '40'] SQL[SELECT * FROM devices_attribs WHERE `device_id` = '40'] itups03-02.net.internal 40 apc UnpingableRRD[cmd[update /opt/observium/rrd/itups03-02.net.internal/status.rrd N:0] stdout[OK u:0.00 s:0.00 r:0.05] stderr[]] RRD[cmd[update /opt/observium/rrd/itups03-02.net.internal/ping.rrd N:U] stdout[OK u:0.00 s:0.00 r:0.06] stderr[]] RRD[cmd[update /opt/observium/rrd/itups03-02.net.internal/ping_snmp.rrd N:U] stdout[OK u:0.00 s:0.00 r:0.06] stderr[]] SQL[INSERT INTO `perf_times` (`type`,`doing`,`start`,`duration`,`devices`) VALUES ('poll','itups03-02.net.internal','1401246542.664','0.066','1')] ./poller.php itups03-02.net.internal May 27, 2014, 20:09 - 1 devices polled in 0.066 secs MySQL: Cell[0/0s] Row[1/0s] Rows[1/0s] Column[0/0s] Update[0/0s] Insert[1/0s] Delete[0/0s] Any advice on where we can look? Seems like the only way to get them back up is to keep running the poller for the particular host until the poller runs. Thanks! Andrew Davis IT Systems J. David Gladstone Institutes

3 3

IPSec Tunnels
by Pedrosi, Derek G. 28 May '14

28 May '14

All, I've noticed that for Cisco ASAs the Routing--IPSec Tunnels section is not accurate. It lists all tunnels that have ever been made and marks them as active, even though the tunnel may not exist anymore. I believe that the OID shows the active tunnels is 1.3.6.1.4.1.9.9.171.1.2.3.1.7 Also, is there a way to alert on this list changing? V0.14.5.5533 Best regards, derek _______________________________________________________________ NOTICE TO PERSONS SUBJECT TO UNITED STATES TAXATION (MCPS) DISCLOSURE UNDER TREASURY CIRCULAR 230: The United States Federal tax advice, if any, contained in this document and its attachments may not be used or referred to in the promoting, marketing or recommending of any entity, investment plan or arrangement, nor is such advice intended or written to be used, and may not be used, by a taxpayer for the purpose of avoiding Federal tax penalties. _______________________________________________________________

2 1

Re: [Observium] spam device type
by Rob VanHooren 28 May '14

28 May '14

'firewall' type close enough? (covers anything UTM-ish...) imo. > On May 28, 2014, at 8:49, observium-request(a)observium.org wrote: > > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: Monitoring Interface names (Pawe? Tyll) > 2. Re: Monitoring Interface names (Pawe? Tyll) > 3. Observium - Device types (Adriaan Smuts) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 28 May 2014 14:28:04 +0200 > From: Pawe? Tyll <ofca(a)ofca.me> > To: Markus Klock <markus(a)best-practice.se> > Cc: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Monitoring Interface names > Message-ID: <16110040385.20140528142804(a)ofca.me> > Content-Type: text/plain; charset=utf-8 > >> Pawel: you are not confusing ifName with?ifDescr perhaps? > Nope; we are using lots of tunnels and they are named indicating > customer names. I never was a fan of eth0, eth1, eth1337 and stuff and > I use proper interface names that have sense to humans pretty much > everywhere I can. Both FreeBSD and Mikrotik lets you name interfaces > how you see fit. Unfortunately FreeBSD doesn't expose description in > SNMP, which I'd love to use to describe customers (ID, bw). > > Our use for Observium is mainly monitoring our access network and > customers' CPEs. > > > > ------------------------------ > > Message: 2 > Date: Wed, 28 May 2014 14:29:44 +0200 > From: Pawe? Tyll <ofca(a)ofca.me> > To: Adam Armstrong <adama(a)memetic.org> > Cc: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Monitoring Interface names > Message-ID: <453820384.20140528142944(a)ofca.me> > Content-Type: text/plain; charset=us-ascii > >> Seems like a bizarre thing to monitor. Are you doing this one some >> brain-dead platform that lets you change ifNames, like Extreme? > Worse. Mikrotik ;) > >> I don't think it's something which is particularly overhead-intensive, >> but it still strikes me as an odd thing to want to monitor. > Too many admins. Some of them have arbitrary approach to keeping > things tidy ;> > > > > ------------------------------ > > Message: 3 > Date: Wed, 28 May 2014 14:49:13 +0200 > From: Adriaan Smuts <adriaan.smuts(a)webafrica.com> > To: Observium Network Observation System <observium(a)observium.org> > Subject: [Observium] Observium - Device types > Message-ID: > <6AFE6591FCB270428ADB45B94F35DA4461EDB3202D(a)wacptexch.corp.webafrica.com> > > Content-Type: text/plain; charset="us-ascii" > > Hi Guys, > > Would it be possible to add a new device type to Observium? We would like a device type for 'Spam Filter' devices. It doesn't have to automatically change the Type to it, we can do that manually. > > The current list: > [cid:image001.png@01CF7A83.FDC3DD50] > > Regards > > Adriaan Smuts > > Systems Administrator - Windows > > [file:///C:\Users\adriaan\AppData\Roaming\Microsoft\Signatures\WebAfrica_Files\signature_logo.jpg] > > ________________________________ > > Direct Line > > +27 21 464 9565 > > Reception > > 086 000 9500 > > Website > > www.webafrica.co.za<http://www.webafrica.co.za/> > > > > >

3 2

Observium - Device types
by Adriaan Smuts 28 May '14

28 May '14

Hi Guys, Would it be possible to add a new device type to Observium? We would like a device type for 'Spam Filter' devices. It doesn't have to automatically change the Type to it, we can do that manually. The current list: [cid:image001.png@01CF7A83.FDC3DD50] Regards Adriaan Smuts Systems Administrator - Windows [file:///C:\Users\adriaan\AppData\Roaming\Microsoft\Signatures\WebAfrica_Files\signature_logo.jpg] ________________________________ Direct Line +27 21 464 9565 Reception 086 000 9500 Website www.webafrica.co.za<http://www.webafrica.co.za/>

1 0

Monitoring Interface names
by Paweł Tyll 28 May '14

28 May '14

I would like to ensure that interface names conform to certain standard. I'm stuck at 'Check Conditions' phase of making an alert. If I understand everything right, then there's no ifName metric available for a match condition, or am I doing something else wrong? Any suggestions? If I'm right, then can ifName be added as a metric?

4 6

Re: [Observium] ntpd offset
by Adam Armstrong 28 May '14

28 May '14

http://tech.kulish.com/2007/10/30/ntp-ntpq-output-explained/ Simon Smith wrote:

1 0

ntpd offset
by Simon Smith 28 May '14

28 May '14

Hi People, hoping someone can explain this in stupid terms for me… I’ve added in the ntpd script to watch a few of our servers and I’ve noticed one of our servers the offset is high then low then high then low can someone explain to me how to NTP works and what is the offset, Jitter, Noise, Stability ? sorry to ask a stupid question! im only 21 and I am currently doing a degree in networking ... Regards Simon

1 0

Custom script on alert
by Franjo Posavec 27 May '14

27 May '14

Hi, We are planning to suscribe to ObserviumPro, and vondering if is possible to run custom script for alerting? scrip will trigger custom asterisk script to make gsm call. Best regards, -- Franjo Posavec system administrator entitas d.o.o. T: +385 (0)40 600 002 S: franjo.posavec

2 1

4k displays
by Adam Armstrong 27 May '14

27 May '14

Hi All, Are any of you running 4k displays yet? We've been thinking about how to handle larger displays and were considering jumping straight from the existing 1280px wide to 3840px rather than building a 'widescreen' mode on 1920px. I think it would be most noticeable in the amount and resolution of the graphs we could display. We could effectively fit twice the amount of data into each graph. It would probably require quite a lot of work, so it's important we get the resolution correct! (no, i don't care about your macbook pro's silly resolution) adam.

2 4

device reboot
by Charlie Burns 26 May '14

26 May '14

Hello, This morning 2 XR devices randomly flagged on observium as rebooted. Both devices asr9001 running XR 4.3.4 have 2 week uptimes and no events this morning. Thanks, Charlie Burns

5 8

cosmetic question
by Ray, Bjoern Karsten 26 May '14

26 May '14

Hi there, I have two routers in different location connected over IPSEC-VPN. Both devices are actively monitored which works fine. Now I am wondering how to make this interconnect visible on the map. Is there an option I have overseen? Alternatively if IPSEC isn't "supported" in this way what protocols would result in a visible connection? Thanks in advance! Björn

2 1

Feature request: Firewall flow statistics
by Erwin Heringa 26 May '14

26 May '14

Hi all, We would like to graph the amount of sessions through our Juniper SRX firewalls with Observium. (snmp oid: .1.3.6.1.4.1.2636.3.39.1.12.1.1.1.6.0) It would be a really nice feature and in the past (when we used cacti) it has helped us detecting a problem with software on one of our servers. I'd really like to see that in Oberservium and maybe others can benefit as well. Met vriendelijke groet, kind regards, Erwin Heringa SIDN | Meander 501 | 6825 MD | Postbus 5022 | 6802 EA | ARNHEM T +31 (0)26 352 55 59 | F +31 (0)26 352 55 05 erwin.heringa(a)sidn.nl | www.sidn.nl

1 0

missing port description in traffic bills edit mode
by Andre Mamitzsch 26 May '14

26 May '14

Hi, I just wanted to change a traffic bill and delete a port, if editing the traffic bill, the port list on the right hand side shows only the delete button but no port description. I found that in revision 5521 and verified it with Firefox, Chrome and Safari. So it does not seem to be browser specific. Could you please look into it ? Regards, Andre

2 1

Transceiver Power error in fiber interface
by Zafar Pravaiz 24 May '14

24 May '14

Hi After upgrading to latest observium i start getting loads of following errors. I don't understand is this a threshold set problem or some IOS bug? Can some one please shed some light? Observium :: Network Observation and Monitoring Dbm Alarm: sfsw1 Te2/1 Receive Power Sensor - TenGigabitEthernet2/1 Receive Power Sensor is over threshold: -2.5dBm (> -40dBm) Observium :: Network Observation and Monitoring Dbm Alarm: sfsw1 Te2/2 Receive Power Sensor - TenGigabitEthernet2/2 Receive Power Sensor is over threshold: -2.6dBm (> -40dBm) Observium :: Network Observation and Monitoring Voltage Alarm: sfsw1 Te2/1 Supply Voltage Sensor - TenGigabitEthernet2/1 Supply Voltage Sensor is over threshold: 0V (> 0V) Observium :: Network Observation and Monitoring Dbm Alarm: sfsw2 Te2/1 Receive Power Sensor - TenGigabitEthernet2/1 Receive Power Sensor is over threshold: -2.8dBm (> -40dBm) Observium :: Network Observation and Monitoring Dbm Alarm: coresw1.aus.edu Te5/4 Receive Power Sensor - TenGigabitEthernet5/4 Receive Power Sensor is over threshold: 0dBm (> -40dBm) SFSW1#sh interfaces transceiver detail Transceiver monitoring is disabled for all interfaces. mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable. ++ : high alarm, + : high warning, - : low warning, -- : low alarm. A2D readouts (if they differ), are reported in parentheses. The threshold values are calibrated. High Alarm High Warn Low Warn Low Alarm Temperature Threshold Threshold Threshold Threshold Port (Celsius) (Celsius) (Celsius) (Celsius) (Celsius) ---------- ------------------ ---------- --------- --------- --------- Te2/1 29.5 ++ 0.0 0.0 0.0 0.0 Te2/2 29.1 ++ 0.0 0.0 0.0 0.0 High Alarm High Warn Low Warn Low Alarm Voltage Threshold Threshold Threshold Threshold Port (Volts) (Volts) (Volts) (Volts) (Volts) ---------- --------------- ---------- --------- --------- --------- Te2/1 0.00 0.00 0.00 0.00 0.00 Te2/2 0.00 0.00 0.00 0.00 0.00 High Alarm High Warn Low Warn Low Alarm Current Threshold Threshold Threshold Threshold Port (milliamperes) (mA) (mA) (mA) (mA) ---------- ----------------- ---------- --------- --------- --------- Te2/1 6.1 ++ 0.0 0.0 0.0 0.0 Te2/2 6.7 ++ 0.0 0.0 0.0 0.0 Optical High Alarm High Warn Low Warn Low Alarm Transmit Power Threshold Threshold Threshold Threshold Port (dBm) (dBm) (dBm) (dBm) (dBm) ---------- ----------------- ---------- --------- --------- --------- Te2/1 -2.9 ++ -40.0 -40.0 -40.0 -40.0 Te2/2 -2.6 ++ -40.0 -40.0 -40.0 -40.0 Optical High Alarm High Warn Low Warn Low Alarm Receive Power Threshold Threshold Threshold Threshold Port (dBm) (dBm) (dBm) (dBm) (dBm) ---------- ----------------- ---------- --------- --------- --------- Te2/1 -2.5 ++ -40.0 -40.0 -40.0 -40.0 Te2/2 -2.6 ++ -40.0 -40.0 -40.0 -40.0 Thanks -- *Zafar Pravaiz *IT Senior Systems Engineer Information Technology Department AUS /> </span><span style='font-size:10.0pt;font-family:Times;mso-bidi-font-family: Tel +971 6 515 2164 Fax +971 6515 2112 American University of Sharjah PO Box 26666, Sharjah United Arab Emirates http://www.aus.edu <http://www.aus.edu/> zpravaiz(a)aus.edu <mailto:youremail@aus.edu>

6 9

FW: SNMP unreachable
by Micah Young 23 May '14

23 May '14

Hi Currently I am able to run an snmpwalk on my devices from bash, however all devices appear down in my Observium instance due to snmp. Does anyone have any ideas as to why this may be the case? -Mike Y. ARDEN A Global Company Celebrating over 50 years of making your life more comfortable! This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. This OUTBOUND E-mail and Document(s) has been scanned by an Antivirus Server.

1 0

WMI Module Observium
by Jeremy Alberts 23 May '14

23 May '14

Hello, I have the following case. I am useing Observium to monitor a few Windows Server 200 R2 VM's. Some machines can't get there disks polled because of a BDEdrive partition (because of this partition the poll times go up to 60 sec/per machine as wel). As workarround i have disabled the storage poller module (the polling time goes down to 3 sec), and enabled the WMI poller module. The wmi poller module works nice. Polling of the Disk partition works as wel! There is only one problem, the graphs/logs for diskspace dont get written to the rdd files when using the wmi disk poller module. Is this a know problem and if so, is there a fix or setting that I could use? Kind regards, Jeremy

3 6

{Disarmed} Health Processor Usage sorting according to the Usage ?
by Supun Rathnayake 23 May '14

23 May '14

Hi , The current health monitoring top menu report ( http://x.x.x.x/health/metric=processor/ ) displays the items in the alphabetical order of the device name. But it would great if we can get this sorted by actual usage, so that it gives like "Top CPU Usages like report" This is just a suggestion, what do you all think , the same thing could be applied to other metrics as well for the time being I just edited the /opt/observium/html/pages/health/processor.inc.php file and set $processors = array_sort_by($processors, 'processor_usage', SORT_DESC, SORT_NUMBER, 'processor_descr', SORT_ASC, SORT_STRING); to get this effect. but my worry is, this will be overwritten when we do the svn upgrades :-) With Best Regards, Supun Rathnayake Lanka communication Services (Pvt) Ltd. 65C, Dharmapala Mawatha, Colombo 07. Sri Lanka. Tel:+94-11-2437545 <tel:%2B94-11-2437545> http://www.lankacom.net http://blog.lankacom.net

2 2

Graphing/data problem
by Joshua Elson 22 May '14

22 May '14

Hi guys, We just started having this problem on Friday and am not sure where to look for the problem. Some of our data just doesn't show up anymore. See the attached image. Some servers work fine and some don't. The 6 hour view will work ok, but the historical data seems to have disappeard. We are seeing odd ?'s on many of the graphs installed of numbers. Here is the SVN info: [root@noc observium]# svn info Path: . URL: http://svn.observium.org/svn/observium/trunk Repository Root: http://svn.observium.org/svn Repository UUID: 61d68cd4-352d-0410-923a-c4978735b2b8 Revision: 5503 Node Kind: directory Schedule: normal Last Changed Author: adama Last Changed Rev: 5503 Last Changed Date: 2014-05-19 01:40:38 -0700 (Mon, 19 May 2014) Any help is greatly appreciated! Josh Elson | Linux Systems Administrator MaxLinear | www.maxlinear.com<http://www.maxlinear.com/> 2051 Palomar Airport Road, Suite 100 | Carlsbad, CA 92011 [Description: Description: http://wiki/download/attachments/1704274/Maxlinear+Logo.png?version=1&modif…] ________________________________ This electronic mail (including any attachments) may contain information that is privileged, confidential, and/or otherwise protected from disclosure to anyone other than its intended recipient(s). Any dissemination or use of this electronic mail or its contents (including any attachments) by persons other than the intended recipient(s) is strictly prohibited. If you have received this message in error, please notify us immediately by reply e-mail so that we may correct our internal records. Please then delete the original message (including any attachments) in its entirety.

3 9

Mikrotik RouterOS 6 Sensors
by Christian Mladek 22 May '14

22 May '14

Hy observium-users, we're using observium with many devices and all sensors report a correct state. But with Mikrotik RB2011 we're getting temperature and voltage warnings from "System 0". The reported values seem ok, but the thresholds are wrong. e.g. temperature 0C - 5.6C, voltage 1.04V - 1.4V how can we fix this behaviour? screens attached: [cid:image001.png@01CF75D6.499A3DD0] [cid:image002.png@01CF75D6.499A3DD0] Thx, Ing. Christian Mladek hotze.com GmbH A-6020 Innsbruck, Eduard-Bodem-Gasse 6 Telefon: +43 512 353640-0 Fax: +43 512 353640-50 Support: DW 910 Verkauf: DW 920 Buchhaltung: DW 930 Informationen gem. UGB: FB Nr. 287217d, LG Innsbruck, vgl. http://impressum.hotze.com/ Sämtliche Leistungen werden ausschliesslich auf Grundlage unserer AGB erbracht, diese können Sie hier nachlesen: http://www.hotze.com/ueber_uns/agb/

2 2

Alerting
by Jeremy Alberts 22 May '14

22 May '14

Hello, Is it possible to configure an alert on certain syslogs? With kind regards, Jeremy

2 1

Detecting force10 S4810
by Kristoffer Egefelt 22 May '14

22 May '14

Hi, S4810 switches is not being detected as S4810 switches with the latest community edition - observium says: Dell Networking OS Operating System Version: 2.0 Application Software Version: 9.4(0.0P1) Series: S4810 Copyright (c) 1999-2014 by Dell Inc. All Rights Reserved. Build Time: Mon Apr 21 08:28:51 PDT 2014 Also it appears that the polling process is crashing the OSPF process on the S4810 switches, causing them to reboot, in case someone reads this before installing ;-) I’m opening a ticket with Dell on that one. Regards Kristoffer

4 11

SNMP walk problem
by Casey Dinsmore 21 May '14

21 May '14

I've discovered an issue with snmpwalk_cache_oid(). If the OID value contains a newline, explode is truncating: $data will contain: dot1qVlanStaticUntaggedPorts.220 = 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dot1qVlanForbiddenEgressPorts.481 = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Thus: $vlans = snmpwalk_cache_oid($device, "dot1qVlanStaticTable", array(), "Q-BRIDGE-MIB"); print_r($vlans); [220] => Array ( [dot1qVlanStaticName] => 220 [dot1qVlanStaticEgressPorts] => FF 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FF [dot1qVlanForbiddenEgressPorts] => 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [dot1qVlanStaticUntaggedPorts] => 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FF [dot1qVlanStaticRowStatus] => active ) Any suggestions? Casey

2 1

SNMP Location
by chott＠praha1.net 21 May '14

21 May '14

Hello everybody! What is best practice for using location in SNMP, some switches like TP-Link doesnt support special character like "dash, comma" What is best for using with GOOGLE map, for example "STREET, CITY, COUNTRY" or i must use only CITY? Regards, Tomas

5 7

Alerts for Device ping delay
by Сережка Хомяков 21 May '14

21 May '14

Hi, Having recently purchased Observium Professional Edition, I have a question on Alerting for high delay to the device. I've configured an Alert Checker with parameters: - Tests: device_ping gt 40 (assuming RTT to the device not to exceed 40ms); - Device match: os equals ios - Entity match: <hostname> - Entity type: Device Actually, this checker applies not to the Device itself, but to the Ports of the Device, resulting in incorrect checks. I assume, that device_reboot checker will act in a similar way and won't trigger an alert. Can anyone provide a working config on this Alert type? ---- Best, Sergey Homyakov

4 5

Netstat - TCP Statistics: Connections
by Ximena Cardinali 21 May '14

21 May '14

Hello, I was wondering if there is a way to configure on the Netstat - TCP Statistics, also the "Connections" I know there are Active and Passive Opens, but I need the Connections on our Load-Balancer Cluster Servers. Any help will be extremely appreciated. Ximena.

1 0

test :)
by Adam Armstrong 21 May '14

21 May '14

test

5 13

unix-agent working, but no info on GUI
by Franjo Posavec 21 May '14

21 May '14

Hi, I enabled unix-agent fo mysql server and pooling is working, debug log on mysql script is also enabled and it is executed every 5 mins, but on GUI there is no AGNET/mysql menu like on demo. I use OpenSource version Best regards, -- Franjo Posavec system administrator entitas d.o.o. T: +385 (0)40 600 002 S: franjo.posavec

1 0

Powerconnect 6248 wrong vlan mapping
by Eduardo Schoedler 20 May '14

20 May '14

Hi, I'm using Observium v0.14.5.5503 and I found an vlan x interface mapping mismatch: Switch vlan: switch-core-xxx-xxxxxxxx#show vlan id 902 VLAN Name Ports Type Authorization ----- --------------- ------------- ----- ------------- 902 Client-xxxxxxxxxx ch18,ch32 Static Required Members of port-channel: ch18 = 1/g18 and 2/g18 ch32 = 1/g32 and 2/g32 Observium Vlans in device: Vlan 902 Client-xxxxxxxxxx: 1/0/18, 1/0/20, 1/0/31, 2/0/17, 2/0/32, 2/0/34 What can be wrong? Thanks in advance. Regards, -- Eduardo Schoedler

4 9

update mikrotik mib
by Simon Smith 20 May '14

20 May '14

Hi, just a message to say the Mikrotik MIB file has been updated with a few extra fields it can be downloaded from http://www.mikrotik.com/download/Mikrotik.mib can you please update the SVN with the new MIB file for it :-) Regards Simon

1 0

MySQL App - Seconds Behind Master
by Ximena Cardinali 20 May '14

20 May '14

Hello There, few days ago I implemented the MySQL App Feature on our Observium and it's working like a charm. It brings useful Information for MySQL Cluster Nodes. I'm just missing something, and that's: "Seconds Behind Master" Is there any particular Configuration that I have to implement to make it work or it's not just yet implemented? BTW, I'm running the Open Source Version of Observium running on a Debian Virtual Server. Thanks in advance! Cheers, Ximena. --- *Ximena E. Cardinali *| Linux Systems Administrator Mobile: +49-179-4335474 | Skype: ximena_cardinali E-mail: ximenacardinali(a)gmail.com | Blog: http://ximunix.blogspot.com/

1 0

tplink router
by Simon Smith 20 May '14

20 May '14

Hi, we like to monitor some of our ADSL routers and Switches these are TP-Link devices, but the observium only picks them up as generic devices!? I’ve created a custom os.inc.php to include a tplink device and icon could you possible put it in the SVN professionally :-) Some info below from an ADSL router if its required: sysDescr -> TD-W8901G sysName -> tp-link sysObjectID -> .1.3.6.1.4.1.1.2.3.4.5 Some Info below from a SWITCH, again if required: sysDescr -> 24-Port Gigabit Smart Switch sysName -> tl-sg2424 sysObjectID -> .1.3.6.1.4.1.11863.1.1.13 Regards Simon

1 0

Interface Marked Delete
by Falco Schmutz 20 May '14

20 May '14

Hello All ! After a several update of our observium, it's appear that all interface is marked delete, and disappear. Do you know why ? Thanks for your help Regards, -- ____________________________________________________________________________________________ Falco SCHMUTZ <http://fr.linkedin.com/in/fschmutz> E-mail : fschmutz(a)premaccess.com Mobile : +33 6 80 22 00 29 Fixe Suisse : +41 44 586 77 74 Fax Suisse : +41 26 347 28 90 Fax France : +33 9 72 12 19 25 premaccess sàrl Route des Arsenaux 41 - CP 132 CH-1705 Fribourg, Suisse http://www.premaccess.com <http://fr.viadeo.com/fr/profile/falco.schmutz> <http://www.facebook.com/premaccess> <http://twitter.com/premaccess> ____________________________________________________________________________________________ Attention : le présent message et toutes les pièces jointes sont confidentiels et établis a l'attention exclusive du ou des destinataire(s) indique(s). Toute autre diffusion ou utilisation non autorisée est interdite. Si vous recevez ce message par erreur, veuillez immédiatement en avertir l'expéditeur par e-mail en retour, détruire le message et vous abstenir de toute référence aux informations qui y figurent afin d'éviter les sanctions attachées a la divulgation et a l'utilisation d'informations confidentielles. Les messages électroniques sont susceptibles d'altération. Nous déclinons toute responsabilité en cas d'altération ou de falsification du présent message. Warning : this e-mail and any files attached are confidential and intended solely to the named addressee(s). Any unauthorised dissemination or use is strictly prohibited. If you received this e-mail in error, please immediately notify the sender by reply e-mail and then delete the e-mail from your system. Please do not copy, use or make reference to it for any purpose, or disclose its contents to any person : to do so could expose you to sanctions. E-mails can be altered or falsified. We shall not be liable for any alteration or falsification on this e-mail.

2 3

Observium vs others
by Alejandro Lengua Vega 19 May '14

19 May '14

Hello, I am looking for a tool that can allow me to monitor customer's physical servers as well as my virtual servers (I have some, not too many Linux/CPanel servers and Windows VPS). This is a list of the tools I have been recommended along with Observium https://nodequery.com/ sar newrelic naemon nagios Icinga I think nagios and similars are too much for me, however I don´t know if Observium has all what I need, can you help me with that? Some of the features I need are: 1. Load/performance monitoring applications like Apache, MySQL, Exim (email) 2. Exim queque size (for preventing spam issues) 3. Generate user logins for my customers (so they can see graphics of their servers) 4. Access from mobile Do you think Observium could help me with this?

2 1

Observium is broken
by Adriaan Smuts 19 May '14

19 May '14

Hi Guys, I updated to Observium 5500 and now my home page is empty. I updated my test environment as well and now that one is also broken... I tried restarting the server but still no luck. Please help! /opt/observium/update.sh Updating Observium to latest version: Getting the latest files from svn.observium.org: U html/index.php A html/pages/device/routing/eigrp_ports.inc.php U html/pages/device/pseudowires.inc.php A html/images/icons/kamailio.png A html/includes/graphs/eigrpport A html/includes/graphs/eigrpport/packets.inc.php A html/includes/graphs/eigrpport/auth.inc.php U html/includes/graphs/accesspoints/numasoclients.inc.php U html/includes/graphs/accesspoints/radioutil.inc.php U html/includes/graphs/device/arubacontroller_numclients.inc.php U html/includes/graphs/device/arubacontroller_numaps.inc.php U html/includes/functions.inc.php U includes/polling/ports.inc.php U includes/discovery/sensors/supermicro-health-mib.inc.php U includes/discovery/arp-table.inc.php U includes/discovery/functions.inc.php U includes/discovery/vlans/q-bridge-mib.inc.php U includes/discovery/discovery-protocols.inc.php U includes/definitions/os.inc.php U includes/definitions/version.inc.php U includes/versioncheck.inc.php A update/147.sql Updated to revision 5500. Updating the databse (if needed): Observium v0.14.5.5500 Discovery -- Updating database/file schema 146 -> 147 ... (db) done. -- Done Current Revision : 5500 New Revision : 5500 Regards Adriaan Smuts Systems Administrator - Windows [file:///C:\Users\adriaan\AppData\Roaming\Microsoft\Signatures\WebAfrica_Files\signature_logo.jpg] ________________________________ Direct Line +27 21 464 9565 Reception 086 000 9500 Website www.webafrica.co.za<http://www.webafrica.co.za/>

5 6

Auto refresh default setting
by Chris Pelling 18 May '14

18 May '14

Hey guys, Subs version, I like to leave the default view page, as Network >> Bits so that I see ALL spikes fairly quickly, and can react if I see anything, however for the love of god, inc F5 / Hard refresh, I cannot get the screen to default to loading say the last 6 hours. Anyway of doing this, and let me provide the URL I am sitting at : http://my.observiumURL.com/devices/type=network/format=graphs/disabled=0/so… Now anything to make this simply autorefresh in the last 6 hours AUTOMATICALLY would be great - beer tokens available. The reason behind this is a 55" screen that sits on the wall, that at the moment doesn't do what it should do and will shortly be used for plastic gun target with suckers!!!! -- Kind regards, Chris

1 0

Re: [Observium] INVALID_MSGID
by Tom Laermans 17 May '14

17 May '14

Hrm, looks like my grep skills failed me this morning. I'll take a look later today. Thanks for looking at this! Simon Smith <simonsmith5521(a)gmail.com> wrote: >Hi All, > >i think i found the bug :-D > >includes/alerting/email.inc.php -> line 93 > >$headers['Message-ID'] = '<' . md5(uniqid(time())) . '@' . $params['localhost'] . '>’; > >$params isn’t set anywhere within the file !? > >anybody have an idea what it should actually be set to? > >regards > >Simon > >On 15 May 2014, at 12:45, Tom Laermans <tom.laermans(a)powersource.cx> wrote: > >> Wut? >> >> On 15/05/2014 08:45, Nikolay Shopik wrote: >>> That's is observium using some loosy script to generate mails >>> >>> On 15.05.2014 3:56, Simon Smith wrote: >>>> Hi, >>>> >>>> i have noticed when the Observium is sending alerts to me, our mailcleaner is blocking them, >>>> >>>> one reason is because the Message-ID is invalid or corrupted when it was sent !? >>>> >>>> for some reason seeing the Message-ID is being seen and sent as >>>> >>>> msgid=<cb0e6df8f4186cc23b4ba07c8bb65af4@> >>>> >>>> i got this information from my sendmail mail.log file and our mailcleaner logs too >>>> >>>> is this a bug in sendmail or the observium? >>>> >>>> regards >>>> >>>> Simon >>>> >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 3

Dell Hardware Sensors
by Travis Kreikemeier 16 May '14

16 May '14

Very little information about this in the Wiki or configuration guide. I would like to get hardware sensors working in Observium for Dell servers, PE 2950, R310, R610, etc. I want to alert when any sensor is not OK. For example, hard drive failure, power supply failure, etc. >From what I think is possible. That information is available in SNMP on a physical Linux server if you setup SNMP SMUX Peer to the Dell OpenManage agent running on the server? Does Observium support it? However, it appears this is not possible on physical Windows? As well, as it look like that hardware SNMP nformation is not available either on ESXi 5+ because of lack of SNMP support integration with Dell OpenManage agent VIB. I'm on correct on this? Or can Observium get this hardware health from WS-MAN on ESXi, or IPMI to iDRAC hardware card? It would be awesome to see a Observium definitive hardware monitoring guide for Dell and then HP. Any information or help would be appreciated! Observium rocks! Oh, and the Alerting system in Pro is awesome! However, little bit of a learning curve. I created 9 alerts that I think should cover most issues. Such as high cpu, low memory, device down, device rebooted, network port at half duplex, network port down, high port utilization, etc. It would have been ideal if there was a Wiki page with all of those just laid out for examples. Everyone just keeps adding more and more example alerts to that page. TRAVIS KREIKEMEIER

3 2

Edit bill ports display bug
by Spencer Gaw 16 May '14

16 May '14

Hey all, I've noticed a display issue on the Edit Bill view, specifically within the Bill Ports section - see attached. The ports display without issue when viewing the bill, but do not appear at all (except for the delete button) in the Edit view. Looks like this issue is present in r5478 and r5492. This isn't a huge deal by any means but if someone could take a look when they have a second, it would be much appreciated. Thanks! Regards, SG

1 0

Incorrect Port VLAN Information
by Casey Dinsmore 16 May '14

16 May '14

I'm testing out Observium and I've noticed a problem with some of the VLAN assignments. Our shop runs HP Procurve switches and we've seen this problem on both the 2824 and the 5308xl. Here is what Observium sees vs the switch config: http://pastebin.com/FGC4z8eJ Is this a known issue? Thanks, Casey

2 2

fisheye.observium.org not working
by Stefano Cordio 16 May '14

16 May '14

Hey guys, I really like follow your work through fisheye.observium.org, but since few days I don't reach it anymore, it shows only a root directory listing of an Apache webserver. Has something changed? Kind Regards, Stefano

2 1

Re: [Observium] Distro Script - CloudLinux
by Adriaan Smuts 16 May '14

16 May '14

Sorry, I forgot to add we use Observium Professional: Observium 0.14.5.5435 From: Adriaan Smuts Sent: Tuesday, May 6, 2014 10:57 AM To: Observium Network Observation System Subject: Distro Script - CloudLinux Hi Guys, Can you please add CloudLinux to the /usr/bin/distro script? # uname -r 2.6.32-458.23.2.lve1.2.52.el6.x86_64 # /usr/bin/distro RedHat 6.5 http://www.cloudlinux.com/ Regards Adriaan Smuts Systems Administrator - Windows [file:///C:\Users\adriaan\AppData\Roaming\Microsoft\Signatures\WebAfrica_Files\signature_logo.jpg] ________________________________ Direct Line +27 21 464 9565 Reception 086 000 9500 Website www.webafrica.co.za<http://www.webafrica.co.za/>

4 19

Gaps in graph data
by Teixeira, Mike 15 May '14

15 May '14

3 4

INVALID_MSGID
by Simon Smith 15 May '14

15 May '14

Hi, i have noticed when the Observium is sending alerts to me, our mailcleaner is blocking them, one reason is because the Message-ID is invalid or corrupted when it was sent !? for some reason seeing the Message-ID is being seen and sent as msgid=<cb0e6df8f4186cc23b4ba07c8bb65af4@> i got this information from my sendmail mail.log file and our mailcleaner logs too is this a bug in sendmail or the observium? regards Simon

3 5

Geocoding shows wrong locations
by Ray, Bjoern Karsten 15 May '14

15 May '14

Hi there, I am running several VLAN in a distributed environment in Germany. I am using the longitude/latitude options to finally not ending up on "An island in the middle of the ocean". Yesterday I added another two VLANs and the map shows devices inside e.g. in India. As I am using private subnet ranges, only, I am wondering why this happens at all and could be done to get over of this little trouble. Subnets I am using are: 192.168.50.0/24 192.168.55.0/24 192.168.60.0/24 192.168.70.0/24 192.168.80.0/24 192.168.90.0/24 192.168.100.0/24 192.168.110.0/24 192.168.120.0/24 ...where the C-octet reflects the VLAN-ID. Thanks in advance!

3 4

Observium Alert Setup
by Simon Smith 15 May '14

15 May '14

Hi, hopying someone can help me, bought the observium, and its brilliant, just what i was looking for and even the graphs and stuff however i can’t seem to get the alerts to work correctly!? i want to monitor a device (not a port) so when it goes offline or does a reboot it will send me an email or run a custom command of my own… is the any guide to help set this up for me? or even if someone could simply tell me how to set it up sorry for being thick, but it just abit confusing to setup a simple alert on a device thats all Regards Simon

2 3

Re: [Observium] ping alerts
by Redish, Graham (PPPO/CONTR) 14 May '14

14 May '14

Tom, Is there a good write up on the new alerting system? I've seen various generic / site specific examples but no documentation that shows me what I can alert on and how to go about setting it up. If you could point me in the right direction or give me some tips I'd appreciate it. >In the new alerting system you can differentiate between snmp is down and ping is down (device_status_type will be either 'ping' or 'snmp'). >Tom >On 13/05/2014 01:09, Adam Armstrong wrote: > I question the existence of a valid scenario where snmpd can't reply > to sysDescr but the server isn't considered broken. > > You're also talking about the /old/ alerting system, which is > deprecated and universally hated and shunned. :> > > adam. > > On 2014-05-12 17:58, Joshua Elson wrote: >> Is there a way to disable alerts for ping when snmpd isn't accessible? >> We get lots of false alerts when servers are under high load. We >> basically just want to be notified if a host is actually down (not >> pinging) and not when snmpd chokes out. >> >> Thanks! >> >> JOSH ELSON | Linux Systems Administrator MAXLINEAR | >> www.maxlinear.com [1] >> 2051 Palomar Airport Road, Suite 100 | Carlsbad, CA 92011 >> >> ------------------------- >> >> This electronic mail (including any attachments) may contain >> information that is privileged, confidential, and/or otherwise >> protected from disclosure to anyone other than its intended >> recipient(s). Any dissemination or use of this electronic mail or its >> contents (including any attachments) by persons other than the >> intended recipient(s) is strictly prohibited. If you have received >> this message in error, please notify us immediately by reply e-mail >> so that we may correct our internal records. Please then delete the >> original message (including any attachments) in its entirety. >> >> Links: >> ------ >> [1] http://www.maxlinear.com/ >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ------------------------------ Subject: Digest Footer _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ------------------------------ End of observium Digest, Vol 46, Issue 30 *****************************************

4 4

troubleshooting sonicwall reporting failures
by Josh Bierman 14 May '14

14 May '14

Hello, Im having an issue with my sonicwall firewalls. they show 15 minute blank spots in reporting. Primary and fail-over devices, at different times. nothing stands out in the logs, and no one is screaming that internet was down for 15 minutes. Suggestions on getting to the bottom of this? is it just a graphing failure? (see attached screen shot) [image: Inline image 1] Joshua Bierman Director of Technology Yeshivat Noam

1 0

Upgrading to Observium Professional
by Jeremy Alberts 14 May '14

14 May '14

Hallo, I am thinking about upgrading to Observium Professional. Before I do this however, I was wondering if someone could answer a question. At the moment I am using Observium to monitor all my Cisco switches and Windows servers. The thing I miss the most in Observium Open Source edition is not being able to receive alerts on the following: § Alerting Memory at certain thresholds (Windows machines) § alerting CPU at certain thresholds (Windows machines) § Alerting disk I/O at certain thresholds (Windows machines) Now I thing this is possible with the Professional edition. Can someone confirm that this is the case? With kind regards, Jeremy

2 1

ping alerts
by Joshua Elson 13 May '14

13 May '14

Is there a way to disable alerts for ping when snmpd isn't accessible? We get lots of false alerts when servers are under high load. We basically just want to be notified if a host is actually down (not pinging) and not when snmpd chokes out. Thanks! Josh Elson | Linux Systems Administrator MaxLinear | www.maxlinear.com<http://www.maxlinear.com/> 2051 Palomar Airport Road, Suite 100 | Carlsbad, CA 92011 [Description: Description: http://wiki/download/attachments/1704274/Maxlinear+Logo.png?version=1&modif…] ________________________________ This electronic mail (including any attachments) may contain information that is privileged, confidential, and/or otherwise protected from disclosure to anyone other than its intended recipient(s). Any dissemination or use of this electronic mail or its contents (including any attachments) by persons other than the intended recipient(s) is strictly prohibited. If you have received this message in error, please notify us immediately by reply e-mail so that we may correct our internal records. Please then delete the original message (including any attachments) in its entirety.

3 3

Disk i/o statistics
by Fabrice Charlier 12 May '14

12 May '14

Hi all, We are currently moving our observium server from an old community edition (0.13.10.4585) to a new powerful server running Professional edition (0.14.4.5391). On the new one, all disk i/o statistics for server devices don't appear in the web interface. After some research, I found that rrd files for disks i/o are not generated. For example, same server monitored by old instance: http://pastebin.com/gF7RA9bU and on new one: http://pastebin.com/Y9ePqyst Maybe I'm missing some new configuration option? Thanks, Fabrice

4 7

Add device failing
by Robert Williams 12 May '14

12 May '14

Hi, Just tried to add a new device (r5478) but it’s failing with no feedback, even at the command line. root@OBSERVIUM:/opt/observium # php add_device.php server.name.domain Observium v0.14.5.5478 Add Device(s) Try to add server.name.domain: Trying v2c community xyz ... root@OBSERVIUM:/opt/observium# It was ok a couple of days ago and I’m not sure how to try to diagnose this further as there is no feedback either at the command line or the web interface (which just says “Trying v2c community xyx …” the same as the command line does). To rule out a duff device I removed an existing working device and tried to re-add it. Fails with the same error also and I’m unable to re-add that device. Any pointers please? Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

3 4

Calix E7-2 port disabling
by Crozier, Doug 11 May '14

11 May '14

I have 14 Calix E7-2 OLTs in this environment that I want to monitor. The first two I added to Observium(PE 5447) showed up with over 1000 ports each. I'd like to disable polling/alerting on all but a handful of ports on each of these devices. I used the "All" button on the device's Ports tab to get this done, but it only disables the first 333 ports. Same behavior on the second OLT. The remaining 900+ ports are all still enabled for polling. Manually selecting the slider for 50 or so of the remaining ports to disable them fails to take effect after clicking "Save". Is there a way to disable the remaining ports, then enable the few that I am interested in? Thanks Doug

3 3

dpkg agent oddness
by Robert Williams 10 May '14

10 May '14

Hi All, I’ve just added the dpkg agent script for the agent to a server, it already had other agents on it which are all working OK (apache, ntp etc.). Now, when I ./dpkg locally it gives the package list just fine. However, Observium shows the package list with some extra items at the top which read <blank> and “Fatal error:” [cid:image001.png@01CF6C41.93B4FDE0] Now on every poll (manual or scheduled) I also get the event log entry “System Arch -> Directive” [cid:image002.png@01CF6C41.F2135120] This dpkg script is working fine on all the other hosts I run it on, and everything else is working fine on this particular host apart from this element of the dpkg script. If I run the agent module in debug then I notice that at the end of the script I get: Fatal error: Directive 'allow_call_time_pass_reference' is no longer available in PHP in Unknown on line 0 Fatal error: Directive 'allow_call_time_pass_reference' is no longer available in PHP in Unknown on line 0 ) So I guess this is what is being interpreted by the poller as a ‘package’ and the ‘architecture’ of the system. However, I do not get this error when I run it locally, only when it’s run from Observium remotely. So - Any ideas or suggestions what to try next? Target host is Ubuntu 14.04 LTS (3.13.0-24-generic x86_64) and I have several others running 14.04 which are polling fine as far as I’m aware. Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

1 1

Relative times not showing properly...
by Michael Loftis 09 May '14

09 May '14

I'm actually not certain when this started to happen as I've noticed it before, but it seemed like it was just in old events, but now, I've noticed that all relative times are getting computed incorrectly, they'll all show like "364 days, 17h 13m 3s" when you hover for an actual time (system event log particularly) the timestamps are right...it's something going wonk doing date math I'm guessing... 0.14.5.5458 - php 5.4.4 (just svn updated to make sure it wasn't fixed) not sure what else is relevant... -- "Genius might be described as a supreme capacity for getting its possessors into trouble of all kinds." -- Samuel Butler

3 4

weekly/monthly reporting tool?
by Joshua Elson 09 May '14

09 May '14

Hi all, I was wondering if there is any sort of reporting tool for Observium? We are looking to get a weekly and/or monthly break down of CPU and memory for all 100 or so of our servers. It has become tedious to go through each server one by one each time we need to gather all these details. As always, thanks in advance! Josh ________________________________ This electronic mail (including any attachments) may contain information that is privileged, confidential, and/or otherwise protected from disclosure to anyone other than its intended recipient(s). Any dissemination or use of this electronic mail or its contents (including any attachments) by persons other than the intended recipient(s) is strictly prohibited. If you have received this message in error, please notify us immediately by reply e-mail so that we may correct our internal records. Please then delete the original message (including any attachments) in its entirety.

3 4

Ruckus ZoneDirector
by Eduardo Schoedler 09 May '14

09 May '14

Hi, Do you plan to provide the discovery of the Ruckus ZoneDirector? Thanks. Regards, -- Eduardo Schoedler

3 3

Alerts only with alert checker
by Eduardo Schoedler 09 May '14

09 May '14

Hi, We are using Observium Pro, congratulations, it's a great tool! But I'm having trouble with alerts and need your help. I have created an alert check for bgp peers, and is ok. But Observium still want send alerts from himself :). How to disable it? Thanks in advance. Regards, -- Eduardo Schoedler

3 4

Add disk status to Buffalo Terastation
by Stefano Cordio 09 May '14

09 May '14

Hey guys, I'd like to implement an addition for my NAS box, a Buffalo Terastation. This NAS sends a daily report about the available space and the state of the disks. Observium already grabs details about the space, so I'd like to also add support to disk status/diagnostics (I already have the needed MIB files). The following is a MIB snippet: ------------------------------------------------------ nasDiskStatus OBJECT-TYPE SYNTAX INTEGER { notSupport(-1), normal(1), array1(2), array2(3), standby(4), degrade(5), remove(6), standbyRemoved(7), degradeRemoved(8), removeRemoved(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of local disks. This value is read from 'diskx' line in file /etc/melco/diskinfo. notSupport(-1) indicates the disk slot is not exist. normal(1) indicates the disk is not part of RAID array. array1(2) indicates the disk is part of array1. array2(3) indicates the disk is part of array2. standby(4) indicates the disk is standby and power-off. degrade(5) indicates the disk has degraded and removed from array, and power-off. remove(6) indicates the disk has removed from array by user and power-off. standbyRemoved(7) indicates the disk is standby and removed from NAS. degradeRemoved(8) indicates the disk has degraded and removed from array and NAS. removeRemoved(9) indicates the disk has removed from array and NAS." ::= { nasDiskEntry 2 } ------------------------------------------------------ I'm not sure which is the best location in the device page for showing these informations. Could we consider these as a kind of sensor or is it something inventory-related? Actually I need a design advice. Would be really nice if you could also give me a pointer to a similar existing code. I strongly believe in learning by example :-) Thanks, Stefano

2 2

Juniper vlans
by gregorcy 09 May '14

09 May '14

Hi, Our Juniper vlans are not showing up correctly. I am wondering if it is something we are doing or possibly a bug in the Juniper code. Here is an image of what we are seeing: http://i.imgur.com/d0MM7Z8.png Thanks for any help, -- Cheers, Brian Gregorcy IT Manager University of Utah Department of Chemical Engineering 801.585.7170

3 3

Re: [Observium] Observium] weekly/monthly reporting tool?
by Adam Armstrong 08 May '14

08 May '14

We need to add filtering capability to this page so that it can be reduced to only the important entities. Adam. Martin Smith wrote:

1 0

Selective Alerts?
by Hamilton, Kent 08 May '14

08 May '14

I'm new to Observium, and was playing with email alerting. Is there a way to selectively disable alerts? For example I'd like to disable over-under voltage alerts from systems. Even in my test set up which only includes 300 devices leaving those types of alerts enabled resulted in over 800 emails last night. -- [exegy_119x45_xparent]<http://www.exegy.com/> S. Kent Hamilton Senior Network Engineer 349 Marshall Ave | Suite 100 Saint Louis, MO 63119 US Phone: +1 314.218.3558 FAX: +1 314.218.3601 Email: KHamilton(a)Exegy.com<mailto:KHamilton@Exegy.com> ________________________________ This e-mail and any documents accompanying it may contain legally privileged and/or confidential information belonging to Exegy, Inc. Such information may be protected from disclosure by law. The information is intended for use by only the addressee. If you are not the intended recipient, you are hereby notified that any disclosure or use of the information is strictly prohibited. If you have received this e-mail in error, please immediately contact the sender by e-mail or phone regarding instructions for return or destruction and do not use or disclose the content to others.

2 1

L2tp not creating interfaces
by Oliver Paget 08 May '14

08 May '14

Hi folks, wonderful product :):) I was just wondering if the L2tp section is in dev or is completed. I can't get it to work and as far as I have troubleshooted I can see that there are not any ports being picked up when my lns is scanned for this functionality to work. I haven't configured anything specific, it appears as you just snmp scan the device and it should pick the session tracking up for the l2tp tab. I can see everything else is working, am I missing something> Cheers, OJ

2 5

Power Supplys
by Matthias Cramer 07 May '14

07 May '14

Dear List Is there a general Idea hos to handle power supplies in observium? Via a sensor seams somewhat wrong for me, because I do not get any voltage or similar readings, only presence and status info. What I like to do us to monitor power supplies for presence and failure especially of Brocade MLXe and ICX devices. Mib description of that is at page 116 (92) and on of the following document: http://www.brocadechina.com/download/fsx/Unified_IP_MIB_Oct2011_Reference.p… Also nice would be something similar for fans as staring on page 118 (94). Regards Matthias -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zurich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250

3 3

Load monitoring
by Fabrice Charlier 07 May '14

07 May '14

Hi all, We would like to trigger an alarm when the load is too high on our servers monitored by observium. If I understand correctly this documentation page (*), it's not possible to create an alarm based on load? There is some plan to implement this option? Thanks, Fabrice (*) http://www.observium.org/wiki/Alerting_Metrics_and_Attributes

2 1

Alert Checker in CE
by Jeremy Alberts 06 May '14

06 May '14

Hello, This question could have been asked a few times now, but I cant find the answer in the mailing list archive. My question is: Before the new release in April the alerting system was checked and in brackets 'Future Release'. In April the new CE release was released. Is the alerting system present in the new CE version? If so, how can I create alert checkers on for example storage? With kind regards, Jeremy Alberts

3 3

Distro Script - CloudLinux
by Adriaan Smuts 06 May '14

06 May '14

Hi Guys, Can you please add CloudLinux to the /usr/bin/distro script? # uname -r 2.6.32-458.23.2.lve1.2.52.el6.x86_64 # /usr/bin/distro RedHat 6.5 http://www.cloudlinux.com/ Regards Adriaan Smuts Systems Administrator - Windows [file:///C:\Users\adriaan\AppData\Roaming\Microsoft\Signatures\WebAfrica_Files\signature_logo.jpg] ________________________________ Direct Line +27 21 464 9565 Reception 086 000 9500 Website www.webafrica.co.za<http://www.webafrica.co.za/>

1 0

Two question..
by Joarli Leandro [INITNET] 05 May '14

05 May '14

Hi, I updated my observium subs today and now I have two new troubles. First - In some devices, the temp1 show 39000ºC...in testing with observium agent, he show me 39º C. I run ./discovery.php -h none after the update. Second - All my servers show show me the services are down...how I configure this feature?? All servers i have, the ssh and http services are running. Regards -- Joarli Leandro Tel: (11) 4478-6171 jleandro(a)initnet.com.br

4 4

cisco cbqos mib?
by Chip Pleasants 05 May '14

05 May '14

Is there support for the cisco cbqos mib? I see it in Sensors, but not sure if I need special config entries or not looking in the right place. Thanks, Chip

1 0

Lost APC Outlet Graphs
by Nicholas Schmidt 03 May '14

03 May '14

I can't pinpoint exactly when it happened but I just noticed this after I updated to the latest subscriber version. I use APC PDUs which allows per outlet SNMP monitoring. Graphing of each outlet was working previously but it is no longer there. The device information is correct: APC Web/SNMP Management Card (MB:v3.8.6 PF:v5.1.4 PN:apc_hw05_aos_514.bin AF1:v5.1.2 AN1:apc_hw05_rpdu2g_512.bin MN:AP8681 HR:02 SN: ZA1248014109 MD:11/23/2012) RRDs of each outlet still exist in the RRD directory: sensor-power-apc-rPDU2OutletMeteredStatusPower.6.rrd sensor-power-apc-rPDU2OutletMeteredStatusPower.7.rrd sensor-power-apc-rPDU2OutletMeteredStatusPower.8.rrd sensor-power-apc-rPDU2OutletMeteredStatusPower.9.rrd But none of the graphs are present Voltage, Current, and Power graphs for each phase are still properly being graphed. Any help?

2 1

How to upgrade the Community edition
by Jeremy Alberts 02 May '14

02 May '14

Hello, The old site had a 'howto' about updating the community edition. Where can I find it on the new site? kind regards, Jeremy

2 1

Alert checker for device down
by Erik INGEBERG 02 May '14

02 May '14

Hi, Is there a way for using the new alerting system to send an e-mail when a device goes down? I see in the wiki that there is a "device_status" metric, but I can't figure out how to use it. There is no "Device" entity type when I try to make a new alert checker. Is this feature still in development? Erik

7 17

Error Drawing Graph During Rollover For Port Errors
by Chip Pleasants 02 May '14

02 May '14

Hi, I get a "Error Drawing Graph" for Port Error graphs when rolling over or going into the graph. I see a error looking at the rrdtool information. "RRDTool Output: ERROR: Not a valid vname: totinB0 in line GPRINT:totinB0:%6.2lf%sB ". I'd really appreciate if anyone could help me fix this or provide some information. Thanks, -Chip [image: Inline image 1] [image: Inline image 2]

3 4

Website on phone browsers
by Stefano Cordio 02 May '14

02 May '14

Hey guys, I tried to open the website on my android phone with three different browsers (native, firefox, chrome), but it seems that the header is hungry for space! :-) Cheers, Stefano

2 1

Strange temperature and voltage readings
by Matthew A Harper 02 May '14

02 May '14

Hi Guys, First time posting - Be gentle ;) I've recently implemented Observium for our department and am absolutely loving it. However after an update this morning I have noticed that some devices are reporting weird readings for their sensors. Temperature and voltage specifically are reporting absurd variables (2209 degrees CPU temp / 1.45KV on a 1.2V rail). http://i.imgur.com/MG5NBA8.png - Random sample of temperature http://i.imgur.com/u8Emr3J.png - Random sample of voltage This issue seems to affect CISCO hardware but does not seem to be specific to a particular model or software revision and has only occurred since the DB Schema was updated this morning. Is anyone else seeing similar results with version 5405? Oh and yes, I confirmed these devices are not on fire or being struck by lightning. :) Regards, Matt. *********************************************************************** WARNING: This email (including any attachments) may contain legally privileged, confidential or private information and may be protected by copyright. You may only use it if you are the person(s) it was intended to be sent to and if you use it in an authorised way. No one is allowed to use, review, alter, transmit, disclose, distribute, print or copy this email without appropriate authority. If this email was not intended for you and was sent to you by mistake, please telephone or email me immediately, destroy any hardcopies of this email and delete it and any copies of it from your computer system. Any right which the sender may have under copyright law, and any legal privilege and confidentiality attached to this email is not waived or destroyed by that mistake. It is your responsibility to ensure that this email does not contain and is not affected by computer viruses, defects or interference by third parties or replication problems (including incompatibility with your computer system). Opinions contained in this email do not necessarily reflect the opinions of the Department of Transport and Main Roads, or endorsed organisations utilising the same infrastructure. ***********************************************************************

2 2

Re: [Observium] Snmptrap Integration?
by Adam Armstrong 02 May '14

02 May '14

We don't do snmptraps. Adam. Ryan Prihoda wrote: Hey all, Is there any way for observium to display snmptraps, specifically from dell dracs ? I see on the wiki that snmptt integration is possible but experimental. I have configured a test drac, snmptrapd, and snmptt. I can see in /var/log/messages that the test message from the drac is reaching the server, but I don't see it showing up in observium. Am I overlooking something fundamental ? Is this even possible ? Thanks, R.Prihoda _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 7

Snmptrap Integration?
by Ryan Prihoda 02 May '14

02 May '14

Hey all, Is there any way for observium to display snmptraps, specifically from dell dracs ? I see on the wiki that snmptt integration is possible but experimental. I have configured a test drac, snmptrapd, and snmptt. I can see in /var/log/messages that the test message from the drac is reaching the server, but I don't see it showing up in observium. Am I overlooking something fundamental ? Is this even possible ? Thanks, R.Prihoda

2 2

April Changelog
by Adam Armstrong 01 May '14

01 May '14

Hi All, The condensed April Changelog is at http://www.observium.org/wiki/Changelog#April_2014 Thanks, adam.

3 2

BGP update count missing
by Matt Ladewig 30 Apr '14

30 Apr '14

After updating from 5391 to 5399, BGP prefix update counts are not showing in the graphs, or in the up and down arrow counts next to each session. The total prefix counts are graphing correctly. All BGP sessions are missing the update counts. Matt UniVoIP [observium_bgp_5399.PNG]

2 2

2 things with alerting
by Bastiaan Topper 30 Apr '14

30 Apr '14

Hi, We have 2 strange things with the alerting system since a few days. - 1. The frontpage displays ports up/down, even when the alerting for that port is disabled in the device settings. Is this normal? Because this wasn't till a few days ago. [cid:image001.png@01CF5ED2.3C5BB560] [cid:image002.png@01CF5ED2.3C5BB560] - 2. Some alert checks worked fine for months, but now they fail. (I only have the database output, because the http://observium/alert_checks/ links returns a blank page, maybe because the result is too big?): [cid:image003.png@01CF5ED2.7A406F60] I attached the debug poll of one of the devices. The polling debug output returns: Checking alert 4 associated by 4 replaced @sensor_limit with 5.92 from entity. Testing: sensor_value greater 5.92 (value: 5.187) FAIL replaced @sensor_limit_low with 4.37 from entity. Testing: sensor_value less 4.37 (value: 5.187) OK Checks failed. Generate alert. What I expect (and what it did for the last months) this alert rule to do, is to fail when the sensor value is not between the threshold ranges. It looks like it is only for the voltage and current sensors. [cid:image004.png@01CF5ED4.23531980] When I check the settings and alerting thresholds, they look fine to me. [cid:image005.png@01CF5ED4.23531980] Am I doing something wrong? Or is this some kind of bug? Thanks and regards, Bastiaan Topper

2 6