- observium - lists.observium.org

question about Disk I/O page
by Joshua Elson 19 Nov '13

19 Nov '13

Hi All, I am new to Observium and love the product so far. I am looking at the Disk I/O page and trying to figure out the legend. Could somebody please explain what the k, M and u's stand for? Is it kb, mb or thousands and millions? What about the u? Thanks in advance! Josh [cid:image001.png@01CEE538.54258F40] Josh Elson | Linux Systems Administrator MaxLinear | www.maxlinear.com<http://www.maxlinear.com/> 760-517-1431 | cell # 760-212-6852 2051 Palomar Airport Road, Suite 100 | Carlsbad, CA 92011 [Description: Description: http://wiki/download/attachments/1704274/Maxlinear+Logo.png?version=1&modif…] ________________________________ This electronic mail (including any attachments) may contain information that is privileged, confidential, and/or otherwise protected from disclosure to anyone other than its intended recipient(s). Any dissemination or use of this electronic mail or its contents (including any attachments) by persons other than the intended recipient(s) is strictly prohibited. If you have received this message in error, please notify us immediately by reply e-mail so that we may correct our internal records. Please then delete the original message (including any attachments) in its entirety.

2 2

Re: [Observium] Stable vs Trunk
by BERTRAND Adrien [BPCE Assurances] 19 Nov '13

19 Nov '13

I am !! In a production environment we may avoid bugs and more risky problems (like an insane SNMP discoverer, or something like that). So I'll be interested in a stable branch, regularly updated :-) I think the most important things are : 1) Stability 2) "Silence" - in terms of not talking too much on the network 3) Performance 4) Without less information or functionality than the latest updates Regards, Adrien BERTRAND Administrateur Sécurité du Système d'Information Tel : 01.42.79.47.81 Interne : 5.47.81 [Description : Q_BPCE_Assurances.jpg] ************************************************************************** From: Tom Laermans <tom.laermans(a)powersource.cx<mailto:tom.laermans@powersource.cx>> To: observium(a)observium.org<mailto:observium@observium.org> Subject: Re: [Observium] Stable vs Trunk Message-ID: <528A414B.5040501(a)powersource.cx<mailto:528A414B.5040501@powersource.cx>> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Hi, > As it turns out, waiting for a bit of software to feel un-buggy enough > to call stable is a little bit like chasing a magic dragon in a > pharmaceutically-enhanced dream, a largely unattainable goal. It's a > little difficult to gauge stability when we have half a dozen commits > per day! > > Are any of you using the stable branch, and if so, how often and under > what conditions would you want me to merge changes? Nobody interested in the stable branch? Tom

1 0

[observium] Graphs has white spaces and not continuous
by Jerico Rubion 18 Nov '13

18 Nov '13

Hi, I'm having a problem with the graphs of all my devices in observium (screenshots attached). What is the advisable crontab settings should I use given the list of devices I am polling? for the list of devices it is in attachment 1 Here are the details of my environment. *Observium* 0.13.7.4172 *Apache* 2.2.15 (CentOS) *PHP* 5.3.3 *MySQL* 5.1.69 *RRDtool* 1.3.8 Crontab settings: */10 * * * * root /opt/observium/poller-wrapper.py 1 >> /dev/null 2>&1 */10 * * * * root /opt/observium/poller.php -h all >> /dev/null 2>&1 Recent output of TOP: top - 00:44:01 up 1 day, 18:35, 1 user, load average: 2.89, 2.26, 2.24 Tasks: 187 total, 5 running, 182 sleeping, 0 stopped, 0 zombie Cpu(s): 13.1%us, 65.9%sy, 0.0%ni, 20.5%id, 0.2%wa, 0.0%hi, 0.3%si, 0.0%st Mem: 5059868k total, 905692k used, 4154176k free, 153836k buffers Swap: 4161528k total, 0k used, 4161528k free, 481076k cached Attachment 1: observium1.jpg list of devices Attachment 2: observium2.jpg snapshot of one linux mail server Attachment 3: observium3.jpg snapshot of network switch device Best Regards, Jerico M. Rubion

5 6

Stable vs Trunk
by Adam Armstrong 18 Nov '13

18 Nov '13

Hi All, When we started the new SVN setup, I had envisioned dropping trunk to stable every couple of weeks when I felt it was un-buggy enough. As it turns out, waiting for a bit of software to feel un-buggy enough to call stable is a little bit like chasing a magic dragon in a pharmaceutically-enhanced dream, a largely unattainable goal. It's a little difficult to gauge stability when we have half a dozen commits per day! Are any of you using the stable branch, and if so, how often and under what conditions would you want me to merge changes? adam.

2 1

duplicate system name
by Zoran Lukenic 18 Nov '13

18 Nov '13

Hello, my observium lab was on 0.12.10.3399. I have some problem with my graphs but it's not a problem i just did a fresh install on new server with last observium version 0.13.10.4721. The tutorial was great and my install work perfect. When i start to add my devices i had some error. Some device have the same system name and when i tri to add them, the 2nd one don't work. "Already got device with SNMP-read sysName (system.name)" I didn't get this on my lab. Is it possible to disable system name check? --- Zoran Lukenic z.lukenic(a)mediactive.fr<mailto:z.lukenic@mediactive.fr> --- Groupe Mediactive 3-4-10, cité Paradis 75010 Paris Tel : +33 1 55 28 80 60 Fax : +33 1 55 28 80 61 Support technique : 0 892 494 777 www.groupe-mediactive.fr<http://www.groupe-mediactive.fr/> Twitter : @mediactivegroup [cid:FB003B7F-1839-4401-8DAE-B37B718E4644]

4 5

billing module not loading three javascript files
by Rutger Bevaart 18 Nov '13

18 Nov '13

Hi all, In my Observium I have issues with the billing graphs where only the quick graphs are loading correctly. The browser inspector shows: Failed to load a resource : A server with the specified hostname cannot be found : http:<my hostname>js/bootstrap-loader.js Failed to load a resource : A server with the specified hostname cannot be found : http:<my hostname>js/bootstrap-tab.js Failed to load a resource : A server with the specified hostname cannot be found : http:<my hostname>js/billing.js It looks like the ‘/‘ after the hostname is missing… Tried to find where this is set and found three files in html/pages/ called: bill.php.inc bills.php.inc packages.inc.php Manually adding a ‘/‘ there does not solve the problem, and then I’m at the end of my l33t observ1um debug skills. Choosing an “transfer graph” gives a “Failed to load resource: the server responded with a status of 500” in the inspector for the graph after the other three above, but it might be totally unrelated. Quick graphs work fine. Anybody encounter this too? regards, Rutger

2 1

Re: [Observium] duplicate system name
by Tom Laermans 18 Nov '13

18 Nov '13

As this is only an issue when adding certain devices, we could make this a commandline option to addhost.php. But that code needs a rewrite to deal with getopt, currently it's a mess :( Tom Mark Boddy <mark(a)boddy.org> wrote: >Mike Stupalov <mike@...> writes: >> >> >> Hi Mark, you can tell the vendor and model of these devices?Maybe we will >add an option to exclude check duplicate sysNames, >> >> but because it is used for autodiscovery, it will not be the default >option. >> >Hi Mike, > >Yes we can tell but only by IP address. To give an example, we might be >monitoring standby generators. If a hospital has 4 buildings each with it's >own generator then we would one of our devices connected to each generator. >All four of our devices would be identical in every way and the only way to >distinguish between them would be via the IP address. If you were to do an >SNMP Walk all 4 they would reply with the exact same header information and >only differ in the actual engine or generator information. > >If it was possible to have duplicate sysNames that would be very helpful. >Please let me know if I have raised more questions. > >Thank-You! >Mark > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Alert notmatch help
by Kevin Cackler 16 Nov '13

16 Nov '13

I would like to run an alert for disk space usage on all of our machines, but want to not alert on our /backup drives (They get alerted at 90%). What do I need to put in the entity field to achieve this? I see theexample in the wiki for mempool_descr match *processor for your example memory check, but it's unclear where mempool_descr comes from. What would be the equivalent for the disk mount point?

2 1

support for Gude product
by Christian Blumer 16 Nov '13

16 Nov '13

Hi, We use Gude products (http://www.gude.info<http://www.gude.info/>) to monitor the power usage of our servers. Specially the two models below: - Expert PDU Basic 8111 (http://www.gude.info/en/power-distribution/elementary-pdu/expert-pdu-basic-…) - Expert Power Control 8211 (http://www.gude.info/en/power-distribution/switched-pdu/expert-power-contro…) Is there any plan to support graphing of power usage on such devices ? Can we contribute to develop the module to graph such devices ? If yes, how ? Thanks in advance for your help and have a good week-end. Christian Blumer

2 1

Re: [Observium] Can't get alert to trigger
by Kevin Cackler 15 Nov '13

15 Nov '13

Yeah, changing to ge fixed it. Just a bug in gt I guess. Kevin Cackler Tech Daddies, LLC 501-205-1512 http://www.techdaddies.com

2 1

Graph limited to 100G ?
by Raphael Maunier 14 Nov '13

14 Nov '13

Hello, I have one Juniper MX480 with 40 * 10G ports. The router push more than 150G and more than 100G on one IRB interface. Observium see the traffic on the IRB interface here : http://imageshack.com/i/mah92bp But is unable to graph the port here : http://imageshack.com/i/1364rap http://imageshack.com/i/nmkft3p I’m running CE 0.13.10.4585 Is there any The rrd graph was created with a lower value for the bandwidth ( updated to 200G after ) . Do I have to re-generate the rrd file ( export from the old rrd and import data to the new one ? Here the rrdtool command to update the rrd rrdtool graph /tmp/IilQ0vGmiWc161PX.png --alt-autoscale-max --rigid -E --start 1384116473 --end 1384202873 --width 1159 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DejaVuSansMono' --font AXIS:7:'DejaVuSansMono' --font-render-mode normal COMMENT:'Bits/s Now Avg Max 95th \n' DEF:outoctets=/opt/observium/rrd/ router.test.com/port-575.rrd:OUTOCTETS:AVERAGE DEF:inoctets=/opt/observium/rrd/ router.test.com/port-575.rrd:INOCTETS:AVERAGE DEF:outoctets_max=/opt/observium/rrd/ router.test.com/port-575.rrd:OUTOCTETS:MAX DEF:inoctets_max=/opt/observium/rrd/ router.test.com/port-575.rrd:INOCTETS:MAX CDEF:octets=inoctets,outoctets,+ CDEF:doutoctets=outoctets,-1,* CDEF:outbits=outoctets,8,* CDEF:outbits_max=outoctets_max,8,* CDEF:doutoctets_max=outoctets_max,-1,* CDEF:doutbits=doutoctets,8,* CDEF:doutbits_max=doutoctets_max,8,* CDEF:inbits=inoctets,8,* CDEF:inbits_max=inoctets_max,8,* VDEF:totin=inoctets,TOTAL VDEF:totout=outoctets,TOTAL VDEF:tot=octets,TOTAL VDEF:95thin=inbits,95,PERCENT VDEF:95thout=outbits,95,PERCENT VDEF:d95thout=doutbits,5,PERCENT AREA:inbits#92B73F LINE1.25:inbits#4A8328:'In ' GPRINT:inbits:LAST:%6.2lf%s GPRINT:inbits:AVERAGE:%6.2lf%s GPRINT:inbits_max:MAX:%6.2lf%s GPRINT:95thin:%6.2lf%s\\n AREA:doutbits#7075B8 LINE1.25:doutbits#323B7C:'Out' GPRINT:outbits:LAST:%6.2lf%s GPRINT:outbits:AVERAGE:%6.2lf%s GPRINT:outbits_max:MAX:%6.2lf%s GPRINT:95thout:%6.2lf%s\\n GPRINT:tot:'Total %6.2lf%s' GPRINT:totin:'(In %6.2lf%s' GPRINT:totout:'Out %6.2lf%s)\\l' <smb://l'>LINE1:95thin#aa0000 LINE1:d95thout#aa0000 regards, Raphael

2 3

Can't get alert to trigger
by Kevin Cackler 14 Nov '13

14 Nov '13

We are just now setting up our alerts for the first time and cannot get even our most basic one to alert successfully. We added an alert checker applied to all devices and all entities. The condition is storage_perc gt 80. We then regenerated our alerts and the alert was assigned successfully to all of our devices. On the alert page that shows a summary of the alert and the devices that it belongs to, I see all of our devices listed and all of them have a status of OK even though one of them is currently sitting at 87% utilization. If I mouse over the "state" column for that entity, it confirms that it is at 87 right now. What are we doing wrong? Why isn't this alert triggering?

2 3

Disabled ports
by Adriaan Smuts 14 Nov '13

14 Nov '13

Hey Guys, I upgraded this morning, running Observium 0.13.11.4759. I am currently having issues with disabled ports. On the devices configuration I disabled the ports (polling & alerts), but they still show on my home page. I have removed the devices and re-added them, but the issue persists. [cid:image001.png@01CEDFCC.99993480] [cid:image002.png@01CEDFCC.D0D38A90] [cid:image003.png@01CEDFCC.EDD4C5F0] Is this a bug? Can anyone help? Regards Adriaan Smuts Junior Systems Administrator [file:///C:\Users\adriaan.CORP\AppData\Roaming\Microsoft\Signatures\WebAfrica_Files\signature_logo.jpg] ________________________________ Direct Line +27 21 464 9565 Reception 086 000 9500 Website www.webafrica.co.za<http://www.webafrica.co.za/>

6 14

Alerting in the Open Source Version
by Ellery Weber 13 Nov '13

13 Nov '13

Hello, I'm currently using the most recent OS version of Observium, and am curious if there is any additional documentation for setting up email alerts (other than http://observium.org/wiki/Configuration_Options#Alert_Settings ). I remember there was a kickstarter earlier this year with the end goal of being able to provide alerting for Observium - was this just going to be for the SVN/subscription version? Thanks, Ellery Weber Network Administrator SELCO Community Credit Union This message (including any attachments) is intended only for the use of a specific individual or entity or specific individuals or entities and may contain information that is non-public, proprietary, privileged, confidential, and exempt from disclosure under applicable law or may constitute as attorney work product. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited and may represent a tortious interference with a confidential business relationship(s). If you have received this communication in error, please notify us immediately by telephone and (i) permanently destroy this message if a facsimile; (ii) permanently delete this message immediately if this is an electronic communication; permanently destroy any electronic or printed copies of this electronic communication.

1 0

Alerting system...
by Thomas Raabo - Zitcom A/S 13 Nov '13

13 Nov '13

Hi guys... [cid:image001.png@01CEE062.CDBEE660] What I´am i doing wrong ? It does match devices when I do a regenerate. Med venlig hilsen | Best regards Thomas Raabo Netværksansvarlig CCIE #33466 Zitcom A/S Telefon: 70 40 00 00 E-mail: kontakt(a)zitcom.dk Direkte: 69 10 60 18 Direkte: tr(a)zitcom.dk

4 15

Adding a Dell 2162DS KVM
by Chris Pelling 13 Nov '13

13 Nov '13

Evening all, I have a Dell 2162DS KVM essentially a rebranded Avocent, have MIB, and the FAQs say its not as easy as "adding a mib" :p I honestly do not mind learning / breaking and getting a bollocking for breaking Observium in trying to get this to work so I can potentially help others :p Who wants to show/tell me where to start and Ill start poking :) Observium sees the device, so thats a good start :-) -- Kind regards, Chris

1 0

Non-snmp Devices
by Cory Thibault 13 Nov '13

13 Nov '13

Hello, Is it possible to add non-snmp devices? Say I need to monitor a specific website for uptime but don't have snmp level access. I looked up the services check however from what I understand it still relies on the device being added the usual way which requires snmp. Assuming I can't add non-snmp devices, could someone point me in the right direction on extending Observium to add this functionality? Ultimately, I want 4 monitors: ping, tcp protocol checks (custom ports), http(s) (simple or with response analysis) and ssh. If I can do that, then graphing the results will be trivial. I realize there are other tools that have these features but I prefer the Observium interface. Cheers, Cory

2 1

Enterprise edition : Bank and legal information
by BERTRAND Adrien [BPCE Assurances] 13 Nov '13

13 Nov '13

Hi, After some negotiations, I convince my chief to subscribe to the Entreprise version of Observium. But I need bank / legal information to ask a purchase to my accounting dpt ... what are your company registration, statutes or bank accounts ? Sincerely (from France), Adrien BERTRAND Administrateur Sécurité du Système d'Information Information security administrator BPCE Assurances 88 av. de France, 75013 Paris Tel : (+33)1.42.79.47.81 [cid:image001.jpg@01CEE079.301DB140]

3 2

Re: [Observium] Enterprise edition : Bank and legal information
by BERTRAND Adrien [BPCE Assurances] 13 Nov '13

13 Nov '13

Ok thank you, I'll contact him directly :-) And sorry for posting this on the mailing list :-( Sincerely, Adrien BERTRAND Administrateur Sécurité du Système d'Information Information security administrator BPCE Assurances 88 av. de France, 75013 Paris Tel : (+33)1.42.79.47.81 Date: Wed, 13 Nov 2013 13:19:12 +0000 From: Adam Armstrong <adama(a)memetic.org> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Enterprise edition : Bank and legal information Message-ID: <4335e700aa963d80b318fbf491da2e03(a)memetic.org> Content-Type: text/plain; charset=UTF-8; format=flowed On 2013-11-13 13:14, BERTRAND Adrien [BPCE Assurances] wrote: > Hi, > > After some negotiations, I convince my chief to subscribe to the > _Entreprise_ version of Observium. > > But I need bank / legal information to ask a purchase to my accounting > dpt ? what are your company registration, statutes or bank accounts ? Hi Adrien, Tom Laermans will provide you will relevant information. :) BTW, this does not belong on the mailing list! adam.

1 0

Unable to map aut_ldap_groups
by Christian Hügel 13 Nov '13

13 Nov '13

Hi, I´m using the ldap mechanism to auth against our AD. So far I can log in but unable to see any graphs or devices. Apparently the group: $config['auth_ldap_groups']['ObserviumAdmins']['level'] = 10; are not mapped. However, the group "ObserviumAdmins" is present in AD and my username is member of this group. The auth_ldap_groupbase and auth_ldap_group is also correct. Is there anything else I have to take into consideration? Christian

3 16

Palo Alto Graphs
by Zafar Pravaiz 12 Nov '13

12 Nov '13

HI, Generating graphs in Palto Alto 4050 have some error, we have another 5060 pair which shows firewall session graph fine. Any clue what could be wrong? Please see the attached graphs. Thanks in Advance -- *Zafar Pravaiz *IT Senior Systems Engineer Information Technology Department AUS /> </span><span style='font-size:10.0pt;font-family:Times;mso-bidi-font-family: Tel +971 6 515 2164 Fax +971 6515 2112 American University of Sharjah PO Box 26666, Sharjah United Arab Emirates http://www.aus.edu <http://www.aus.edu/> zpravaiz(a)aus.edu <mailto:youremail@aus.edu>

2 1

Graph limited to 100G
by Raphael Maunier 11 Nov '13

11 Nov '13

Hello, I have one Juniper MX480 with 40 * 10G ports. The router push more than 150G and more than 100G on one IRB interface. Observium see the traffic on the IRB interface here : http://imageshack.com/i/mah92bp But is unable to graph the port here : http://imageshack.com/i/1364rap http://imageshack.com/i/nmkft3p I’m running CE 0.13.10.4585 Is there any The rrd graph was created with a lower value for the bandwidth ( updated to 200G after ) . Do I have to re-generate the rrd file ( export from the old rrd and import data to the new one ? Here the rrdtool command to update the rrd rrdtool graph /tmp/IilQ0vGmiWc161PX.png --alt-autoscale-max --rigid -E --start 1384116473 --end 1384202873 --width 1159 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DejaVuSansMono' --font AXIS:7:'DejaVuSansMono' --font-render-mode normal COMMENT:'Bits/s Now Avg Max 95th \n' DEF:outoctets=/opt/observium/rrd/router.test.com/port-575.rrd:OUTOCTETS:AVE… DEF:inoctets=/opt/observium/rrd/router.test.com/port-575.rrd:INOCTETS:AVERA… DEF:outoctets_max=/opt/observium/rrd/router.test.com/port-575.rrd:OUTOCTETS… DEF:inoctets_max=/opt/observium/rrd/router.test.com/port-575.rrd:INOCTETS:M… CDEF:octets=inoctets,outoctets,+ CDEF:doutoctets=outoctets,-1,* CDEF:outbits=outoctets,8,* CDEF:outbits_max=outoctets_max,8,* CDEF:doutoctets_max=outoctets_max,-1,* CDEF:doutbits=doutoctets,8,* CDEF:doutbits_max=doutoctets_max,8,* CDEF:inbits=inoctets,8,* CDEF:inbits_max=inoctets_max,8,* VDEF:totin=inoctets,TOTAL VDEF:totout=outoctets,TOTAL VDEF:tot=octets,TOTAL VDEF:95thin=inbits,95,PERCENT VDEF:95thout=outbits,95,PERCENT VDEF:d95thout=doutbits,5,PERCENT AREA:inbits#92B73F LINE1.25:inbits#4A8328:'In ' GPRINT:inbits:LAST:%6.2lf%s GPRINT:inbits:AVERAGE:%6.2lf%s GPRINT:inbits_max:MAX:%6.2lf%s GPRINT:95thin:%6.2lf%s\\n AREA:doutbits#7075B8 LINE1.25:doutbits#323B7C:'Out' GPRINT:outbits:LAST:%6.2lf%s GPRINT:outbits:AVERAGE:%6.2lf%s GPRINT:outbits_max:MAX:%6.2lf%s GPRINT:95thout:%6.2lf%s\\n GPRINT:tot:'Total %6.2lf%s' GPRINT:totin:'(In %6.2lf%s' GPRINT:totout:'Out %6.2lf%s)\\l' LINE1:95thin#aa0000 LINE1:d95thout#aa0000 regards, Raphael

1 0

Re: [Observium] Problems populating graphs
by Adam Armstrong 08 Nov '13

08 Nov '13

Where in the install guide did it tell you to do that? What else did you modify? Ross Ashley <rashley(a)katto.com> wrote: >I set the poller to run from the root crontab. > >Here is the crontab -l > >33 */6 * * * /opt/observium/discovery.php -h all >> /dev/null 2>&1 >*/5 * * * * /opt/observium/discovery.php -h new >> /dev/null 2>&1 >*/5 * * * * /opt/observium/poller-wrapper.php 2 >> /dev/nul > >On 11/08/2013 02:13 PM, Adam Armstrong wrote: >> And what user does the poller run as from cron? >> >> Ross Ashley <rashley(a)katto.com> wrote: >> >>> No. The device data, like OS type and version looks fine but all of the >>> graphs are empty. I ran the poller as root so all the rrds are updated >>> that one time. >>> >>> On 11/08/2013 02:00 PM, Adam Armstrong wrote: >>>> Is it populating any other data? >>>> >>>> The fact that the RRDs are being created means that the poller is >>>> running, at least once. >>>> >>>> adam. >>>> >>>> >>>> On 2013-11-08 18:57, Ross Ashley wrote: >>>>> Yes, I thought of that :-) But I'm getting the same behavior on >>>>> localhost, which led me to believe that I'd screwed something up. >>>>> Permissions seem OK. >>>>> >>>>> On 11/08/2013 01:52 PM, Adam Armstrong wrote: >>>>> You might want to try a less functionally retarded device, to make sure >>>>> everything works, first. >>>>> >>>>> adam. >>>>> >>>>> >>>>> On 2013-11-08 18:51, Ross Ashley wrote: >>>>> I'm trying to setup an airport extreme. I think I've successfully set >>>>> it up both from the command line with add_device.php and from the web >>>>> page, (I deleted it and then added it). The static info for it >>>>> appears but any graphic info doesn't. All the graphs are empty, >>>>> showing Nan >>>>> >>>>> rrdtool dump yields Nan for all data other than static info. Here is a >>>>> portion of what I mean; >>>>> >>>>> <?xml version="1.0" encoding="utf-8"?> >>>>> <!DOCTYPE rrd SYSTEM "http://oss.oetiker.ch/rrdtool/rrdtool.dtd"> >>>>>  >>>>> <rrd> >>>>> <version>0003</version> >>>>> <step>300</step>  >>>>> <lastupdate>1383934188</lastupdate>  >>>>> >>>>> <ds> >>>>> <name> icmpInMsgs </name> >>>>> <type> COUNTER </type> >>>>> <minimal_heartbeat>600</minimal_heartbeat> >>>>> <min>NaN</min> >>>>> <max>1.0000000000e+11</max> >>>>> >>>>>  >>>>> <last_ds>69</last_ds> >>>>> <value>0.0000000000e+00</value> >>>>> <unknown_sec> 288 </unknown_sec> >>>>> </ds> >>>>> >>>>> <ds> >>>>> <name> icmpOutMsgs </name> >>>>> <type> COUNTER </type> >>>>> <minimal_heartbeat>600</minimal_heartbeat> >>>>> <min>NaN</min> >>>>> <max>1.0000000000e+11</max> >>>>> >>>>>  >>>>> <last_ds>31</last_ds> >>>>> <value>0.0000000000e+00</value> >>>>> <unknown_sec> 288 </unknown_sec> >>>>> </ds> >>>>> >>>>> ... >>>>> >>>>> I followed the installation instructions twice :-) but I can't seem to >>>>> get any data to appear. >>>>> >>>>> Can someone give me an idea of something to check? >>>>> >>>>> Thanks. >>>>> >>>>> Ross >>>>> _______________________________________________ >>>>> observium mailing list >>>>> observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>> _______________________________________________ >>>>> observium mailing list >>>>> observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>> >>>>> _______________________________________________ >>>>> observium mailing list >>>>> observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 5

Re: [Observium] Problems populating graphs
by Adam Armstrong 08 Nov '13

08 Nov '13

And what user does the poller run as from cron? Ross Ashley <rashley(a)katto.com> wrote: >No. The device data, like OS type and version looks fine but all of the >graphs are empty. I ran the poller as root so all the rrds are updated >that one time. > >On 11/08/2013 02:00 PM, Adam Armstrong wrote: >> Is it populating any other data? >> >> The fact that the RRDs are being created means that the poller is >> running, at least once. >> >> adam. >> >> >> On 2013-11-08 18:57, Ross Ashley wrote: >>> Yes, I thought of that :-) But I'm getting the same behavior on >>> localhost, which led me to believe that I'd screwed something up. >>> Permissions seem OK. >>> >>> On 11/08/2013 01:52 PM, Adam Armstrong wrote: >>> You might want to try a less functionally retarded device, to make sure >>> everything works, first. >>> >>> adam. >>> >>> >>> On 2013-11-08 18:51, Ross Ashley wrote: >>> I'm trying to setup an airport extreme. I think I've successfully set >>> it up both from the command line with add_device.php and from the web >>> page, (I deleted it and then added it). The static info for it >>> appears but any graphic info doesn't. All the graphs are empty, >>> showing Nan >>> >>> rrdtool dump yields Nan for all data other than static info. Here is a >>> portion of what I mean; >>> >>> <?xml version="1.0" encoding="utf-8"?> >>> <!DOCTYPE rrd SYSTEM "http://oss.oetiker.ch/rrdtool/rrdtool.dtd"> >>>  >>> <rrd> >>> <version>0003</version> >>> <step>300</step>  >>> <lastupdate>1383934188</lastupdate>  >>> >>> <ds> >>> <name> icmpInMsgs </name> >>> <type> COUNTER </type> >>> <minimal_heartbeat>600</minimal_heartbeat> >>> <min>NaN</min> >>> <max>1.0000000000e+11</max> >>> >>>  >>> <last_ds>69</last_ds> >>> <value>0.0000000000e+00</value> >>> <unknown_sec> 288 </unknown_sec> >>> </ds> >>> >>> <ds> >>> <name> icmpOutMsgs </name> >>> <type> COUNTER </type> >>> <minimal_heartbeat>600</minimal_heartbeat> >>> <min>NaN</min> >>> <max>1.0000000000e+11</max> >>> >>>  >>> <last_ds>31</last_ds> >>> <value>0.0000000000e+00</value> >>> <unknown_sec> 288 </unknown_sec> >>> </ds> >>> >>> ... >>> >>> I followed the installation instructions twice :-) but I can't seem to >>> get any data to appear. >>> >>> Can someone give me an idea of something to check? >>> >>> Thanks. >>> >>> Ross >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Problems populating graphs
by Ross Ashley 08 Nov '13

08 Nov '13

I'm trying to setup an airport extreme. I think I've successfully set it up both from the command line with add_device.php and from the web page, (I deleted it and then added it). The static info for it appears but any graphic info doesn't. All the graphs are empty, showing Nan rrdtool dump yields Nan for all data other than static info. Here is a portion of what I mean; <?xml version="1.0" encoding="utf-8"?> <!DOCTYPE rrd SYSTEM "http://oss.oetiker.ch/rrdtool/rrdtool.dtd">  <rrd> <version>0003</version> <step>300</step>  <lastupdate>1383934188</lastupdate>  <ds> <name> icmpInMsgs </name> <type> COUNTER </type> <minimal_heartbeat>600</minimal_heartbeat> <min>NaN</min> <max>1.0000000000e+11</max>  <last_ds>69</last_ds> <value>0.0000000000e+00</value> <unknown_sec> 288 </unknown_sec> </ds> <ds> <name> icmpOutMsgs </name> <type> COUNTER </type> <minimal_heartbeat>600</minimal_heartbeat> <min>NaN</min> <max>1.0000000000e+11</max>  <last_ds>31</last_ds> <value>0.0000000000e+00</value> <unknown_sec> 288 </unknown_sec> </ds> ... I followed the installation instructions twice :-) but I can't seem to get any data to appear. Can someone give me an idea of something to check? Thanks. Ross

2 4

Re: [Observium] Upgrading version to latest
by cbermudez＠tothus.net 07 Nov '13

07 Nov '13

Thank you for you reply xavier. There is manually way to upgrade or I need reinstall onservium and lost all my configuration? Thank you very much Cristian ------Original Message------ From: Xavier Beaudouin To: cbermudez(a)tothus.net Subject: Re: [Observium] Upgrading version to latest Sent: Nov 7, 2013 12:36 PM Hi, > Hi list, I'm using the 0.13.10.4585 version and I'd like upgrade to latest. > I'm not have svn because I don't have a subscription. How can I do? There is 2 ways... First subscribe (pay)... Another use one of the forks. Xavier Enviado desde mi BlackBerry de Movistar (http://www.movistar.com.ar)

4 3

Fw: Upgrading version to latest
by cbermudez＠tothus.net 07 Nov '13

07 Nov '13

Hi list! Could you help me with my question please? Thank you !!! For you effort Cristian ------Original Message------ From: cbermudez(a)tothus.net To: cbermudez(a)tothus.net To: Observium Network Observation System ReplyTo: cbermudez(a)tothus.net Subject: Re: [Observium] Upgrading version to latest Sent: Nov 7, 2013 11:56 AM Hi list! Could you help me with my question please? Thank you !!! For you effort Cristian ------Original Message------ From: cbermudez(a)tothus.net Sender: observium To: observium(a)observium.org ReplyTo: cbermudez(a)tothus.net ReplyTo: Observium Network Observation System Subject: [Observium] Upgrading version to latest Sent: Nov 7, 2013 12:52 AM Hi list, I'm using the 0.13.10.4585 version and I'd like upgrade to latest. I'm not have svn because I don't have a subscription. How can I do? Regards Enviado desde mi BlackBerry de Movistar (http://www.movistar.com.ar) _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium Enviado desde mi BlackBerry de Movistar (http://www.movistar.com.ar) Enviado desde mi BlackBerry de Movistar (http://www.movistar.com.ar)

2 1

Re: [Observium] Upgrading version to latest
by cbermudez＠tothus.net 07 Nov '13

07 Nov '13

Hi list! Could you help me with my question please? Thank you !!! For you effort Cristian ------Original Message------ From: cbermudez(a)tothus.net Sender: observium To: observium(a)observium.org ReplyTo: cbermudez(a)tothus.net ReplyTo: Observium Network Observation System Subject: [Observium] Upgrading version to latest Sent: Nov 7, 2013 12:52 AM Hi list, I'm using the 0.13.10.4585 version and I'd like upgrade to latest. I'm not have svn because I don't have a subscription. How can I do? Regards Enviado desde mi BlackBerry de Movistar (http://www.movistar.com.ar) _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium Enviado desde mi BlackBerry de Movistar (http://www.movistar.com.ar)

1 0

+1 re: bsd
by Rob VanHooren 07 Nov '13

07 Nov '13

+1 (++good) for a maintained BSD port. but draw the line at slowaris or other nasty *nix. there’s a reason AIX is a homonym of “aches”. alternatively, go the IncrediblePBX route, call it “embedded” and pack it into a VM. ideally, both … if embedded BSD is good enough for StatSeeker, pfSense, or FreeNAS; it’s good enough for us! LOL. by some unfathomable logic, packing up something into an OVF container (along with replacing bash with busybox, and tossing phone-home/updates into a cron job) is an acceptable way to avoid the political agony of introducing Obs into some brain-dead enterprise ‘doze-only shops that forbid OpenSores. ps adam — suggest any future “enterprise" license (if any) should be $8,500/year for those types (under $10k tax-in, so you stay at the discretion boundary of 1st-level budget approvers). Plus another 30% for next-business-day email “support” maintenance. Otherwise, they’ll think you’re just kidding. (keep it the Exact Same Thing as the svn version, but it just costs more … because somehow, that makes it legitimate! ) $0.02 R. On Nov 7, 2013, at 1:38, observium-request(a)observium.org wrote: > Regarding FreeBSD, yes, but you know, it's just another BSD "unix", and > very server oriented

3 2

Re: [Observium] list
by Rob VanHooren 07 Nov '13

07 Nov '13

phpBB would be a better UI, and more searchable. (imo) On Nov 7, 2013, at 7:00, observium-request(a)observium.org wrote: > the way it is now is > just fine. > > Tom

2 1

Fwd: Observium bug
by Ata Redeemer 07 Nov '13

07 Nov '13

Hi, I am a technical trainer for users who would want to run observium as their preferred network monitoring tool. To I tried setting observium and this is what the display looks like. I will like to know if this is a bug. I am installing the open source version though. Regards Ata Redeemer -aka ata-linux

2 1

Mailing list: Subs only, or open access?
by Adam Armstrong 07 Nov '13

07 Nov '13

Hi All, Someone mentioned during the "Support Gate" scandal at the weekend that we might consider making the mailing list accessible to subscribers only. Do you guys think this is a good idea? adam.

5 4

ping @ Lixfeld
by Rob VanHooren 07 Nov '13

07 Nov '13

I’ve got the gear if you can come up with space, bandwidth, and electric. pls. contact me off list. maybe we can help Adam out. cheers, R. On Nov 5, 2013, at 3:52, observium-request(a)observium.org wrote: > should really find some large ISP with a lot of old kit and a spare rack > to sponsor something like that, I think. Any volunteers

3 5

Upgrading version to latest
by cbermudez＠tothus.net 06 Nov '13

06 Nov '13

Hi list, I'm using the 0.13.10.4585 version and I'd like upgrade to latest. I'm not have svn because I don't have a subscription. How can I do? Regards Enviado desde mi BlackBerry de Movistar (http://www.movistar.com.ar)

1 0

Observium Displays Login Page After Every Sub-Page Request
by Ron Wingfield 06 Nov '13

06 Nov '13

2 3

Re: [Observium] Graph Gaps - aka I've horked something
by Tom Laermans 06 Nov '13

06 Nov '13

Sure sounds like it doesn't finish in 5min.. because of "I added some devices and..." ... Adam Armstrong <adama(a)memetic.org> wrote: >The ping graph for localhost? > >That is very odd. The ping graph doesn't even use snmp. > >Are you using the poller wrapper or not? > >adam. > >On 2013-11-06 19:53, chip wrote: >> That's what I thought at first as well, then noticed the issue >> happening with monitoring the localhost, including the ping response >> time. Looking at all the graphs, the gaps seem consistent across >> everything so it's like everything works or everything doesn't. I >> would assume that something intermittent would allow some hosts or >> oids to work and some do not. Very odd. My sysadmin skills aren't >> great but I'll keep poking. >> >> Attached is the log for running sudo ./poller.php -d -h localhost | >> tee ~/log4.txt >> >> Thanks for all the effort! >> >> --chip >> >> On Wed, Nov 6, 2013 at 2:29 PM, Adam Armstrong <adama(a)memetic.org> >> wrote: >> >> The fact that you get any data at all suggests that it's not a code >> issue. >> >> The graph looks exactly how i'd expect for something where the snmp >> queries are imtermittently failing, either because of poor network or >> something like a firewall with constrained sessions. >> >> Have you tried running the poller in debug mode and seeing what output >> you get? >> >> adam. >> >> On 2013-11-06 19:12, chip wrote: >> >> Hi all, >> >> Yesterday afternoon I added several devices and since then I'm >> getting gaps in *all* my graphs. Even those for the localhost. I >> upgraded to the latest (commercial) version, just to check, and still >> having issues. I'm not quite sure what to make of this. >> >> I have nfsen and cacti running on the same box and their graphs all >> look ok so it seems something specific to observium. My disk io is a >> bit high but not too bad, cpu is good, ram is fine. See attached >> screen shot for example of gaps. >> >> 8gb of RAM >> Ubuntu 12.04 >> 750gb sata disk (ST3750640NS) >> Intel(R) Xeon(R) CPU X5450 @ 3.00GHz >> >> *couple of notes* >> >> - a few days ago I tweaked some mysql settings >> >> < #table_cache = 64 >> --- >> table_cache = 600 >> 65c65 >> < query_cache_size = 16M >> --- >> query_cache_size = 32M >> >> - Also in order to group some devices together I manually edited the >> observium.device.location column in the db for some of the devices. >> >> Thoughts? Direction? >> >> Thanks all! >> >> --chip >> >> -- >> Just my $.02, your mileage may vary, batteries not included, etc.... >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1] >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1] >> >> -- >> Just my $.02, your mileage may vary, batteries not included, etc.... >> >> Links: >> ------ >> [1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 5

Graph Gaps - aka I've horked something
by chip 06 Nov '13

06 Nov '13

Hi all, Yesterday afternoon I added several devices and since then I'm getting gaps in *all* my graphs. Even those for the localhost. I upgraded to the latest (commercial) version, just to check, and still having issues. I'm not quite sure what to make of this. I have nfsen and cacti running on the same box and their graphs all look ok so it seems something specific to observium. My disk io is a bit high but not too bad, cpu is good, ram is fine. See attached screen shot for example of gaps. 8gb of RAM Ubuntu 12.04 750gb sata disk (ST3750640NS) Intel(R) Xeon(R) CPU X5450 @ 3.00GHz *couple of notes* - a few days ago I tweaked some mysql settings < #table_cache = 64 --- > table_cache = 600 65c65 < query_cache_size = 16M --- > query_cache_size = 32M - Also in order to group some devices together I manually edited the observium.device.location column in the db for some of the devices. Thoughts? Direction? Thanks all! --chip -- Just my $.02, your mileage may vary, batteries not included, etc....

2 5

Disable default maps location
by Jason Lixfeld 06 Nov '13

06 Nov '13

I have a few hundred devices that I will be working on adding sysLocation to. It'll take some time, but until that's done, is there any way to disable the default location for unknown location devices and still be able to see the one the map that do have sysLocation? Seeing all those in the middle of the Atlantic is a little useless to me :) Thanks!

2 1

Re: [Observium] Billing question
by Chris Pelling 06 Nov '13

06 Nov '13

Ah ok bubble bursts :'( Sent from Chris on the move... ----- Reply message ----- From: "Adam Armstrong" <adama(a)memetic.org> To: "Observium Network Observation System" <observium(a)observium.org> Subject: [Observium] Billing question Date: Wed, Nov 6, 2013 17:42 I don't think we'd accept anything for improvement of the billing code. It's so limited in market and complex to maintain that it's probably one of the things which would get moved to a slightly-more-expensive sub fee in the future, should we need to do that. adam. On 2013-11-06 17:36, Chris Pelling wrote: > Ok, I'll bung ?50 into a kitty with some beer tokens too anyone else > want to chip in ? > > Sent from Chris on the move... > > ----- Reply message ----- > From: "Adam Armstrong" <adama(a)memetic.org> > To: "Observium Network Observation System" <observium(a)observium.org> > Subject: [Observium] Billing question > Date: Wed, Nov 6, 2013 17:33 > > > On 2013-11-06 16:43, Chris Pelling wrote: > 'ello all, > > Will there in the future do we know of think be an option for billing > of power ? Just a thought, and worth asking :-) > > > This has been something that we've been looking at for quite a while. > > I don't think there's very much code we could share, so it would be > quite a large chunk of work (not made any easier by every vendor > storing > this information in a different place, and in a different format). > > You are the first person who's asked for it though, until now it was > just something we'd thought of :) > > adam. > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Billing question
by Chris Pelling 06 Nov '13

06 Nov '13

Ok, I'll bung ?50 into a kitty with some beer tokens too anyone else want to chip in ? Sent from Chris on the move... ----- Reply message ----- From: "Adam Armstrong" <adama(a)memetic.org> To: "Observium Network Observation System" <observium(a)observium.org> Subject: [Observium] Billing question Date: Wed, Nov 6, 2013 17:33 On 2013-11-06 16:43, Chris Pelling wrote: > 'ello all, > > Will there in the future do we know of think be an option for billing > of power ? Just a thought, and worth asking :-) > This has been something that we've been looking at for quite a while. I don't think there's very much code we could share, so it would be quite a large chunk of work (not made any easier by every vendor storing this information in a different place, and in a different format). You are the first person who's asked for it though, until now it was just something we'd thought of :) adam. _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] Billing question
by Chris Pelling 06 Nov '13

06 Nov '13

I'll also mention then how about something else that might be useful and that's a domains expiring ticker for this important domains that you simply can't not renew. Me being a domain registrar 9hs nothing tho do with out :-D Sent from Chris on the move... ----- Reply message ----- From: "Adam Armstrong" <adama(a)memetic.org> To: "Observium Network Observation System" <observium(a)observium.org> Subject: [Observium] Billing question Date: Wed, Nov 6, 2013 17:33 On 2013-11-06 16:43, Chris Pelling wrote: > 'ello all, > > Will there in the future do we know of think be an option for billing > of power ? Just a thought, and worth asking :-) > This has been something that we've been looking at for quite a while. I don't think there's very much code we could share, so it would be quite a large chunk of work (not made any easier by every vendor storing this information in a different place, and in a different format). You are the first person who's asked for it though, until now it was just something we'd thought of :) adam. _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Billing question
by Chris Pelling 06 Nov '13

06 Nov '13

'ello all, Will there in the future do we know of think be an option for billing of power ? Just a thought, and worth asking :-) Kind regards, Chris

2 1

Compensating for hostname changes
by Jason Lixfeld 06 Nov '13

06 Nov '13

My company wants to institute a naming convention change and as such, we'd need to update the hostnames in Observium to match. I presume that Observium will not magically update anything if a hostname changes, and I'm sure others have gone through this activity in the past, so I'd like feedback on what's the best way to go about it and any caveats. From my very limited perspective on the matter, I think all I need to do is change the hostnames in the hostname column of the devices table in conjunction with renaming the $observium/rrds/$hostname to match the change. Yes? No? Maybe So? Thanks in advance.

4 4

Re: [Observium] ServerTech Sentry3 Graphs & Infeeds
by KELLY, Christopher 06 Nov '13

06 Nov '13

Hey Tom (and anyone else with Sentry3 Rails), Fix for this one was in an earlier message > http://www.mail-archive.com/observium@observium.org/msg00519.html Make sure you have the latest MIB and add the code to sentry3-mib.inc.php in …/observium/includes/discovery/sensors Also, you were right about the graphs Tom – tweaked the cron jobs and all is well! ________________________________ This e-mail is sent by Suncorp Group Limited ABN 66 145 290 124 or one of its related entities "Suncorp". Suncorp may be contacted at Level 18, 36 Wickham Terrace, Brisbane or on 13 11 55 or at suncorp.com.au. The content of this e-mail is the view of the sender or stated author and does not necessarily reflect the view of Suncorp. The content, including attachments, is a confidential communication between Suncorp and the intended recipient. If you are not the intended recipient, any use, interference with, disclosure or copying of this e-mail, including attachments, is unauthorised and expressly prohibited. If you have received this e-mail in error please contact the sender immediately and delete the e-mail and any attachments from your system. 　

2 1

lingering snmp queries?
by David Peall 06 Nov '13

06 Nov '13

Have i set the timeouts incorrectly because these should have stopped? date time : Tue Oct 29 13:39:53 SAST 2013 ps awux returns the following: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 19497 0.0 0.2 23356 2332 ? S 12:41 0:00 /usr/bin/snmpbulkwalk -t 1000 -r 3 -v2c -c -OQUs -m BRIDGE-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp udp:servername:161 dot1dBasePortIfIndex root 20410 0.0 0.0 4400 612 ? S 12:45 0:00 sh -c /usr/bin/snmpbulkwalk -t '1000' -r '3' -v2c -c 'snmpstring'@1 -OQUs -m BRIDGE-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'servername':'161' dot1dBasePortIfIndex 2>/dev/null root 20411 0.0 0.2 23356 2408 ? S 12:45 0:00 /usr/bin/snmpbulkwalk -t 1000 -r 3 -v2c -c -OQUs -m BRIDGE-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp udp:servername:161 dot1dBasePortIfIndex root 24591 0.0 0.0 4400 612 ? S 12:50 0:00 sh -c /usr/bin/snmpbulkwalk -t '1000' -r '3' -v2c -c 'snmpstring'@1 -OQUs -m BRIDGE-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'servername':'161' dot1dBasePortIfIndex 2>/dev/null root 24592 0.0 0.2 23356 2408 ? S 12:50 0:00 /usr/bin/snmpbulkwalk -t 1000 -r 3 -v2c -c -OQUs -m BRIDGE-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp udp:servername:161 dot1dBasePortIfIndex root 24840 0.0 0.0 4400 616 ? S 12:51 0:00 sh -c /usr/bin/snmpbulkwalk -t '1000' -r '3' -v2c -c 'snmpstring'@1 -OQUs -m BRIDGE-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'servername':'161' dot1dBasePortIfIndex 2>/dev/null root 24841 0.0 0.2 23356 2408 ? S 12:51 0:00 /usr/bin/snmpbulkwalk -t 1000 -r 3 -v2c -c -OQUs -m BRIDGE-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp udp:servername:161 dot1dBasePortIfIndex root 25873 0.0 0.0 4400 612 ? S 12:55 0:00 sh -c /usr/bin/snmpbulkwalk -t '1000' -r '3' -v2c -c 'snmpstring'@1 -OQUs -m BRIDGE-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'servername':'161' dot1dBasePortIfIndex 2>/dev/null root 25876 0.0 0.2 23356 2408 ? S 12:55 0:00 /usr/bin/snmpbulkwalk -t 1000 -r 3 -v2c -c -OQUs -m BRIDGE-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp udp:servername:161 dot1dBasePortIfIndex root 26090 0.0 0.0 4400 612 ? S 12:55 0:00 sh -c /usr/bin/snmpbulkwalk -t '1000' -r '3' -v2c -c 'snmpstring'@1 -OQUs -m BRIDGE-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'servername':'161' dot1dBasePortIfIndex 2>/dev/null Thanks — David Peall

2 3

ServerTech Sentry3 Graphs & Infeeds
by KELLY, Christopher 05 Nov '13

05 Nov '13

Hi guys, Hoping someone can point me in the right direction or lend a hand – I have installed Observium CE 0.13.10.4585 to RHEL 6 and have it up and running. Added a couple of power rails, however none of the graphs are populating (no network traffic, uptime or voltage). But, all of the devices added are reporting back their current load and status. [cid:image001.png@01CED48E.68EA1960] [cid:image003.png@01CED48E.68EA1960] [cid:image004.png@01CED48E.68EA1960] Also noticed that Observium is only reporting on 2 of the 4 Current Infeeds (as per 1st screenshot) – is there a way to enable Observium to display the other 4 feeds? [cid:image005.png@01CED48E.68EA1960] Cheers! ________________________________ This e-mail is sent by Suncorp Group Limited ABN 66 145 290 124 or one of its related entities "Suncorp". Suncorp may be contacted at Level 18, 36 Wickham Terrace, Brisbane or on 13 11 55 or at suncorp.com.au. The content of this e-mail is the view of the sender or stated author and does not necessarily reflect the view of Suncorp. The content, including attachments, is a confidential communication between Suncorp and the intended recipient. If you are not the intended recipient, any use, interference with, disclosure or copying of this e-mail, including attachments, is unauthorised and expressly prohibited. If you have received this e-mail in error please contact the sender immediately and delete the e-mail and any attachments from your system. 　

2 1

Upgrade to 4737 broke some graphs
by Chris Pelling 05 Nov '13

05 Nov '13

Hi Guys, Upgraded today using "svn update" to 4737 from 4760 and 2 switch graphs (dell) stopped showing data, cisco, vyatta and one dell unaffected. For example, we have 2 x Dell M6220 stacked blades *a and c* and 1 x Dell M6348 stacked blade switch all in M1000e chassis. a = worked before and after, graph looks aok b = worked before, now stopped c = worked before, now stopped An interesting observation, if I drill down to a port on B, and click realtime, its showing realtime information - so we know that works. Billing also seems unaffected, just the graphs at : /devices/type=network/format=graphs/graph=bits/ stopped for these 2 devices (albeit one is identical to a working device) exactly at the time of upgrade. I confirmed we did do the upgrade as per the wiki : svn update ./discovery.php -h none So now stumped, what can I do to get them back showing the current data (they have the historical few hours before update) and/or what can I run to aid in finding a poss issue ? :-) -- Kind regards, Chris

5 41

Re: [Observium] Alerting...
by Adam Armstrong 05 Nov '13

05 Nov '13

There is a page on the wiki explaining the basics. Its still a bit of a work in progress, but some people already find it useful... Adam. Thomas Raabo - Zitcom A/S <tr(a)zitcom.dk> wrote: >Is there any documentation on the new alerting system? > >Is there a way to turn off all the old alerting stuff and start using the new stuff? > >/Thomas >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Alerting...
by Thomas Raabo - Zitcom A/S 05 Nov '13

05 Nov '13

Is there any documentation on the new alerting system? Is there a way to turn off all the old alerting stuff and start using the new stuff? /Thomas

2 1

Fwd: Regarding developers attitude...
by Doychin Dokov 05 Nov '13

05 Nov '13

Hi all, I would just like to share my experience with the attitude of Adam towards general minor web-interface issue reported by a paying customer (me). I've reported that the OSPF stats look very confusing and provided a screenshot which shows the issue. The inital response I got was "jira is not for general complaining". My answer was: "Where do we do so, then? Now that Observium is paid, we deserve some proper attention to problems, at least.... Not just the close-it-as-fast-as-you-can attitude you have so far.... Also, I'm more than willing to fix it myself by looking at the BGP code, so was jast curios if there is any plan to already rework the OSPF pages, as what is seen on the screenshot is really of no use - and I guess your opinion is the same as well." Which resulted in these comments from Tom Laermans and Adam Armstrong: "I believe you are confused about what exactly it is that you paid for." "You're definitely doing the right thing to make sure we add the features you want..." And then the issue was completely deleted.... So, I'd like to point these things: * why do we get such an attitude against the money kindly "asked" from us? Being a kickstarter supporter for the alerting system, I kind of felt being lied to, since the Observium developers decided that one has to get a license to receive the full functionality which the funding was raised for in the first place... Anyways, I understand the need for more revenue, but not the attitude at all. * this is in no way requesting a new feature. Is just a report, plus marked as of minor importance, which shows a feature already available in Observium being kind-of unusable. This makes me completely not understand the way developers behaved. * i've asked Adam in a personal e-mail what's the reason for this attitude. Since he did not get the guts to reply, I hope he does it here. I'd very much want to know what I've done wrong to provoke such an attitude. * this is not the first time one of the developers would say "idiot" to a (paying) user. So go ahead, shoot me. Thank you for your time and sorry about the need to post this here. Kind regards, - D. ---------- Forwarded message ---------- From: Adam Armstrong (JIRA) <jira(a)observium.org> Date: 2013/11/3 Subject: [OBS-JIRA] (OBSERVIUM-571) OSPF stats are a mess To: dokov(a)silistra.tv Adam Armstrong<http://jira.observium.org/secure/ViewProfile.jspa?name=adama>deleted [image: Bug] OBSERVIUM-571 *OSPF stats are a mess* <http://jira.observium.org/browse/OBSERVIUM-571> This message is automatically generated by JIRA. If you think it was sent incorrectly, please contact your JIRA administrators For more information on JIRA, see: http://www.atlassian.com/software/jira

11 32

Help troubleshooting auto discovery
by Jason Lixfeld 05 Nov '13

05 Nov '13

I added a new box to my network last week, but Observium hasn't seemed to have picked it up yet. I'm trying to troubleshoot it, but short of proving ping, CDP and snmpwalk on the box work fine and manually running the discovery cron job, I'm not sure what else to do in terms of troubleshooting. Can anyone lend a pointer? CentOS 6.3 (Final) Observium 0.13.11.4743 [root@monitor01 observium]# /opt/observium/discovery.php -d -h new DEBUG! Observium v0.13.11.4743 Discovery Schema update disabled by -h new, run with -h none to perform it manually. SQL[SELECT * FROM `devices` WHERE status = 1 AND disabled = 0 AND (`last_discovered` IS NULL OR `last_discovered` = '0000-00-00 00:00:00') ORDER BY device_id DESC] /opt/observium/discovery.php new November 5, 2013, 8:16 - 0 devices discovered in 0.002 secs MySQL: Cell[0/0s] Row[0/0s] Rows[1/0s] Column[0/0s] Update[0/0s] Insert[0/0s] Delete[0/0s] [root@monitor01 observium]# mysql> select hostname from devices where hostname like 'bfr01.905king%'; Empty set (0.00 sec) mysql> RP/0/RSP0/CPU0:bfr01.151FrontStW01.YYZ#sh cdp neigh te0/2/0/14 detail Tue Nov 5 08:09:06.390 EST ------------------------- Device ID: bfr01.905KingStW01.YYZ SysName : bfr01.905KingStW01.YYZ Entry address(es): IPv4 address: * Platform: cisco ASR9K Series, Capabilities: Router Interface: TenGigE0/2/0/14 Port ID (outgoing port): TenGigE0/1/0/0 Holdtime : 166 sec Version : Cisco IOS XR Software, Version 4.3.2[Default] Copyright (c) 2013 by Cisco Systems, Inc. advertisement version: 2 Duplex: full RP/0/RSP0/CPU0:bfr01.151FrontStW01.YYZ# [root@monitor01 observium]# snmpwalk -v2c -c * bfr01.905KingStW01.YYZ sysDescr SNMPv2-MIB::sysDescr.0 = STRING: "Cisco IOS XR Software (Cisco ASR9K Series), Version 4.3.2[Default] Copyright (c) 2013 by Cisco Systems, Inc." [root@monitor01 observium]# ping -c 1 bfr01.905KingStW01.yyz PING bfr01.905KingStW01.yyz (10.219.49.22) 56(84) bytes of data. 64 bytes from bfr01.905KingStW01.YYZ (10.219.49.22): icmp_seq=1 ttl=253 time=0.862 ms --- bfr01.905KingStW01.yyz ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 1ms rtt min/avg/max/mdev = 0.862/0.862/0.862/0.000 ms [root@monitor01 observium]# Thanks in advance, eh! ;)

3 7

Re: [Observium] :-)
by Rob VanHooren 05 Nov '13

05 Nov '13

it’s Canada. Everybody knows everybody. He’s in the next igloo a few streets over. :-P On Nov 5, 2013, at 8:04, observium-request(a)observium.org wrote: > know eachother? :P > > adam.

2 1

Setting up Observium as a Virtual Directory
by Norris Ward 05 Nov '13

05 Nov '13

Hi all, I am trying to setup Observium in a proof of concept environment. When I try to make it a virtual directory on the linnux Debian server, the attached webpage is what I get compared to when i make the web root that of the observium html path. How can I fix this?

3 2

Re: [Observium] Error drawing Graph
by Adam Armstrong 04 Nov '13

04 Nov '13

I monitor devices with 100ms+ latency, so that isn't a problem. More of a problem is badly written SNMP stacks :-( Adam Roman <rromanyak(a)squarespace.com> wrote: >Thanks Adam for your feedback, I'll upgrade observing yo the latest version, if it still doesn't work than I'll just install it locally in the remote data center and see if it works there > >Roman > >Sent from my iPhone > >> On Oct 30, 2013, at 9:11 PM, Adam Armstrong <adama(a)memetic.org> wrote: >> >>> On 2013-10-30 17:44, Roman Romanyak wrote: >>> Hello everyone, >>> I'm having strange issue, and spend a lot of time troubleshooting this >>> without any success. >>> Getting error 'error drawing graph' only for some devices only - >>> EX4200 switches, which are located in the remote datacenter. After I >>> started seeing issue, I install another switch here in local >>> datacenter and added it to observium and its working good. Could be >>> the issue in latency - the delay is about 30ms? >>> discovery and poller scripts run good, the only thing I noticed that >>> for the devices that don't work I in rrd/<device_name>/ files >>> port-###.rrd are missing. The CPU and Memory graphs are working good, >>> only network graphs are having errors. >> >> Make sure you're running the latest version, there were some issues with a change earlier this week. >> >> JunOS is a special little butterfly and needs special attention sometimes... >> >> Latency won't really have that effect, the only thing that is likely to is failing to receive data from the switch, which may be fixed in the latest revisions. >> >> adam. >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

observium just stops after switching to subscription.
by Thomas Raabo - Zitcom A/S 04 Nov '13

04 Nov '13

If i run discovery.php -h none I get no output. The only way I could get it going again was to uncomment this line in common.php if (file_exists($config['install_dir']."/includes/debug/ref.inc.php")) { include($config['install_dir']."/includes/debug/ref.inc.php"); $ref_loaded = TRUE; } Whats my problem? I´am running centos. Thomas

3 8

new feature request
by Rob VanHooren 03 Nov '13

03 Nov '13

Tom/Mike I suggest to implement this new feature for Adam, ASAP: http://www.thewhiskyexchange.com/P-19856.aspx ;-) R. On Nov 3, 2013, at 17:13, observium-request(a)observium.org wrote: > Either read what's come before, or say nothing. > > FUCKING HELL.

4 3

Re: [Observium] observium Digest, Vol 40, Issue 9
by Corey Robertson 03 Nov '13

03 Nov '13

I think the majority of these complaints have come from users who have forgotten this is a grassroots, homegrown effort, which single handedly out performs many other NMS systems albeit paid or free. If you expect answers and resolution to every minute detail which you don't like, put you money where your mouth is. The Observium team has been more than gracious to continue to develop such a great monitoring platform and keep it going while still maintaining the open source ideals. > On Nov 3, 2013, at 4:13 PM, observium-request(a)observium.org wrote: > > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: Fwd: Regarding developers attitude... (Adam Armstrong) > 2. Re: Fwd: Regarding developers attitude... (Adam Armstrong) > 3. Re: Fwd: Regarding developers attitude... (Doychin Dokov) > 4. Re: observium just stops after switching to subscription. > (Tom Laermans) > 5. Re: Fwd: Regarding developers attitude... (Tom Laermans) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 03 Nov 2013 21:43:01 +0000 > From: Adam Armstrong <adama(a)memetic.org> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Fwd: Regarding developers attitude... > Message-ID: <fde9ac9c729e4be8f2eebf3be002bb08(a)memetic.org> > Content-Type: text/plain; charset=UTF-8; format=flowed > > Fuck off, cuntmuppet. > > Either read what's come before, or say nothing. > > FUCKING HELL. > > >> On 2013-11-03 20:52, Tom Henderson wrote: >> Maybe take it offline gents? Of at least off list? http://xkcd.com/438/ >> [1] >> >> A simple "Hi $user, this is covered on the wiki here: $url. Thanks for >> using observium." would be trivial to implement with any email >> templating system. Even "Sorry, $feature is not currently in the >> timeline because of $reasons." would be better than getting in an >> argument. >> >> Cheers >> >> Tom >> >> -- >> >> ------------------------- >> >> If you are not the intended recipient of this email, you must not >> disclose, copy, or distribute any information contained in or attached >> to it, or take any action/inaction based on it. Please contact us >> immediately, and delete this email from your system. Any views or >> opinions presented in this email are solely those of the author and >> not of Pack & Company (NZ) Limited (the "Company"), however any >> intellectual property contained in or attached to this email is the >> property of the Company. Thank you. >> >> Links: >> ------ >> [1] http://xkcd.com/438/ >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > ------------------------------ > > Message: 2 > Date: Sun, 03 Nov 2013 21:44:16 +0000 > From: Adam Armstrong <adama(a)memetic.org> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Fwd: Regarding developers attitude... > Message-ID: <80652049ab831e346e2bec554d8ee638(a)memetic.org> > Content-Type: text/plain; charset=UTF-8; format=flowed > >> On 2013-11-03 21:40, Doychin Dokov wrote: >> As my first message says, I've tried to contact Adam on his personal >> e-mail to get an idea for the reason for this attitude, to no avail. >> >> One more time, I've not requested a new feature or anything else, I >> just reported an already-existing part of observium not looking >> correctly, asked if it's a leftover and planned to be reworked, as the >> similar BGP stats look fine, and even offered to work on it. >> >> There are no $reasons for such $attitude, and it's not the first time >> it happens, so I wanted to know why, and how is this considered >> normal? > > You did none of those things. > > So now i'm going to add liar to the list of reasons why we will no > longer accept any communication from you. > > adam. > > > ------------------------------ > > Message: 3 > Date: Mon, 4 Nov 2013 00:04:59 +0200 > From: Doychin Dokov <dokov(a)silistra.tv> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Fwd: Regarding developers attitude... > Message-ID: > <CALD-xbC4JXP68OFZdJmCcwy-ysN=o3pHjstd=LpujhZADRFGow(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Adam, > > Everyone would have seen with their eyes what I have offered, if you have > not deleted the issue in jira! > > Also, I have pasted my exact reply in my first email, here it is once again: > > "Now that Observium is paid, we deserve some proper attention to problems, > at least.... Not just the close-it-as-fast-as-you-can attitude you have so > far.... > > Also, I'm more than willing to fix it myself by looking at the BGP code, so > was jast curios if there is any plan to already rework the OSPF pages, as > what is seen on the screenshot is really of no use - and I guess your > opinion is the same as well." > > > I'm very much sure you have read it, as you and Tom Laermans have replied > to it that i have no idea what I have paid for.... > > So, naming me a "liar" is completely inappropriate, and is a true > confirmation about your inability to communicate normally with people. You > are digging observium's grave. > > - D. > > > > > 2013/11/3 Doychin Dokov <dokov(a)silistra.tv> > >> As my first message says, I've tried to contact Adam on his personal >> e-mail to get an idea for the reason for this attitude, to no avail. >> >> One more time, I've not requested a new feature or anything else, I just >> reported an already-existing part of observium not looking correctly, asked >> if it's a leftover and planned to be reworked, as the similar BGP stats >> look fine, and even offered to work on it. >> >> There are no $reasons for such $attitude, and it's not the first time it >> happens, so I wanted to know why, and how is this considered normal? >> >> - D. >> >> >> 2013/11/3 Tom Henderson <tom(a)pack.co.nz> >> >>> Maybe take it offline gents? Of at least off list? http://xkcd.com/438/ >>> >>> A simple "Hi $user, this is covered on the wiki here: $url. Thanks for >>> using observium." would be trivial to implement with any email templating >>> system. Even "Sorry, $feature is not currently in the timeline because of >>> $reasons." would be better than getting in an argument. >>> >>> Cheers >>> >>> Tom >>> >>> >>> -- >>> >>> >>> ------------------------------ >>> If you are not the intended recipient of this email, you must not >>> disclose, copy, or distribute any information contained in or attached to >>> it, or take any action/inaction based on it. Please contact us immediately, >>> and delete this email from your system. Any views or opinions presented in >>> this email are solely those of the author and not of Pack & Company (NZ) >>> Limited (the "Company"), however any intellectual property contained in or >>> attached to this email is the property of the Company. Thank you. >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

1 0

Minor OSPF page fixes
by Sander Steffann 03 Nov '13

03 Nov '13

So, here are a few minor quick fixes to device/routing/ospf. I hope this lessens the tension here a bit. Index: html/pages/device/routing/ospf.inc.php =================================================================== --- html/pages/device/routing/ospf.inc.php (revision 4732) +++ html/pages/device/routing/ospf.inc.php (working copy) @@ -57,7 +57,7 @@ echo('</tr>'); echo('<tr bgcolor="'.$area_bg.'">'); - echo('<td colspan=7>'); + echo('<td colspan=4>'); echo('<table width=100% border=0 cellpadding=5>'); echo('<tr><th></th><th>Port</th><th>Status</th><th>Port Type</th><th>Port State</th></tr>'); @@ -80,6 +80,9 @@ $port_enabled = '<span style="color: #aaaaaa">disabled</span>'; } + // Fix label + $ospfport['label'] = $ospfport['ifDescr']; + echo('<tr bgcolor="'.$port_bg.'">'); echo(' <td width=15></td>'); echo(' <td><strong>'. generate_port_link($ospfport) . '</strong></td>'); Cheers, Sander

2 1

How to use the new alerting system.
by Thomas Raabo - Zitcom A/S 03 Nov '13

03 Nov '13

I would like to create a 80 % interface utilzation alarm. If the threshold hits 5 times the alert should be generated. Do we have any documentation on the new interface? Thomas

1 0

October Changelog
by Adam Armstrong 02 Nov '13

02 Nov '13

Hi Guys, Here's the condensed version of the changes for October: Also visible at http://www.observium.org/wiki/Changelog#October_2013 Major Improvements and Additions Extensive improvements to sensor display code and definitions. Extensive restructuring to sensor discovery including linking sensors to OSes via MIB simplifying the process of adding new OSes and sensor types. WMI-based poller for retrieving extra data from Windows. Improves CPU/Storage polling and adds Exchange and MSSQL metrics collection. Major rewrite to integrate and expand PowerNet-MIB support for APC devices Allow the use of max-reps on snmpbulkwalk. Vastly improves walking of large tables on supported devices, particularly IOS, Arista and Linux. New Google Maps API-based map complete with point clustering, auto-centring and zooming support to replace the old Google Charts API map Improvements and Additions Support for AVTECH RoomAlert 24E Detection of Toshiba eStudio printers Detection of DIGI USB servers Barracuda NG FW detection Support for airflow sensors. Support for state sensors on SensorProbe / Minkel SRMS. Allow device hostname as a parameter instead of device_id Support for processor and memory on Cisco QFP Collect Dell Service Tag from Dell PowerConnect devices HH3C memory pool and processor polling from HH3C-ENTITY-MIB RADLAN state sensors from RADLAN-HWENVIROMENT MIB Microsens OS and temperature sensors detection Procera detection NetAPP filesystem discovery and polling via the storage system Additional Dell PowerConnect sysObjectIDs Dell-Vendor-MIB sensors Netbotz support Support for two new sensors types; Capacity and Runtime. Primarily used for UPSes and other battery-related devices. Audiocodes Mediant detection Bugfixes Fix Cisco SLA support Some improvements to handling of invalid devices and graph types Improved limits for timeouts/retries on SNMP operations Applications with multiple instances are now accessed via a drop-down Warning if devices have never been polled/discovered now works correctly Fix API to correctly use the authentication system instead of hardcoded database authentication. Correctly use user id in LDAP auth to allow per-device and per-entity permissions Fix Cisco BGP session address formatting Make sure that the RRD directory is correctly renamed when renaming a device Debugging / Troubleshooting Add a page to output the data Observium holds about a port for debugging/troubleshooting purposes.

3 2

Re: [Observium] control device ports via SNMP
by Adam Armstrong 01 Nov '13

01 Nov '13

No, we don't have any features which allow control of the devices at all. Adam. Bogdan Ghita <bvghita(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

control device ports via SNMP
by Bogdan Ghita 01 Nov '13

01 Nov '13

Hello I've been looking through the features of Observium but couldn't find out whether it includes functionality to disable or enable individual ports on a (monitored) switch/router via SNMP. I understand that this lies outside the scope of the software, but I thought I'd ask just in case it's there (or can be enabled optionally) and I missed it. If it isn't, could anybody recommend a management/monitoring software able to provide this? Best regards Bogdan

2 2

Re: [Observium] graphe on pose
by Adam Armstrong 01 Nov '13

01 Nov '13

What version does observium say on the bottom left? Adam. Zoran Lukenic <z.lukenic(a)mediactive.fr> wrote: >I'm on the last version. I install the new server with SVN 2 days ago. >My network is ok. All server are in datacenter with 1G or 10G switches. >I have 2 observium on 2 difrent server and network and I have same problem. >My Centreon, cacti, intermapper do the same thing and my graphs are full. > >The pooler is like you write in your doc: > >more /etc/cron.d/observium >33 */6 * * * root /opt/observium/discovery.php -h all >> /dev/null 2>&1 >* /5 * * * * root /opt/observium/discovery.php -h new /dev/null 2>&1 >* /5 * * * * root /opt/observium/pooler-wrapper.py 1 >> /dev/null 2>&1 > > > > >--- >Zoran Lukenic >z.lukenic(a)mediactive.fr >--- >Groupe Mediactive >3-4-10, cité Paradis 75010 Paris >Tel : +33 1 55 28 80 60 >Fax : +33 1 55 28 80 61 >Support technique : 0 892 494 777 >www.groupe-mediactive.fr >Twitter : @mediactivegroup > > >________________________________________ >De : Adam Armstrong [adama(a)memetic.org] >Date d'envoi : jeudi 31 octobre 2013 05:55 >À : Observium Network Observation System >Objet : Re: [Observium] graphe on pose > >This is most certainly related to network conditions or polling frequency. > >The poller must run every 5 minutes. > >Make sure you are running the latest version (svn update) > >Adam. > >Zoran Lukenic <z.lukenic(a)mediactive.fr> wrote: > >>I didn't know that the screenshot will not be able in the mail. >>So I have problems with all graphs on all devices. My graphs are OK but they have some hole. Some time 30min, some time more. >>I have this same devices on my cacti, behind same firewall and I don't have this problem. >> >>ps: I don't know if I do the right thing for answer. >> >>------------------------------ >> >>Message: 2 >>Date: Wed, 30 Oct 2013 17:34:09 +0000 >>From: Zoran Lukenic <z.lukenic(a)mediactive.fr> >>To: "observium(a)observium.org" <observium(a)observium.org> >>Subject: [Observium] graphe on pose >>Message-ID: >> <286037ABC3D0D74DB5172245EF4597970144239E(a)srv-exchange01.exchange.mediactive.fr> >> >>Content-Type: text/plain; charset="iso-8859-1" >> >>Hello, >> >>I have some problem with my graphe ( cf: screenshot ) >> >>I looked in FAQ and some Mailing Liste archive but I didn't find any one with the same problem. >> >>do you have some idea where to look? >> >> >> >> >> >> >> >> >>--- >>Zoran Lukenic >>z.lukenic(a)mediactive.fr<mailto:z.lukenic@mediactive.fr> >>--- >>Groupe Mediactive >>3-4-10, cit? Paradis 75010 Paris >>Tel : +33 1 55 28 80 60 >>Fax : +33 1 55 28 80 61 >>Support technique : 0 892 494 777 >>www.groupe-mediactive.fr<http://www.groupe-mediactive.fr/> >>Twitter : @mediactivegroup >>[cid:FB003B7F-1839-4401-8DAE-B37B718E4644] >>

5 13

Frontpage map show province with ISO 3166-2
by Florian Znottka 01 Nov '13

01 Nov '13

Hello! Observium works for me like a charm, but I have a problem with the frontpage map: I can't get a province with a region ISO 3166-2 code (e.g. DE-SH) as a full map on the frontpage. Only working configuration is to show the whole country (e.g. DE) which is a bit to big. All co-locations of our servers are too close to each other (20 miles) , so that you can't figure out on the map, which location is which. My config.php so far: $config['frontpage']['map']['resolution'] = "provinces"; $config['frontpage']['map']['region'] = "DE-SH"; $config['frontpage']['map']['dotsize'] = "1"; error-message: Request map does not exist. Is my config file incorrect or does it not work? Or is there another method to zoom in on the map? Thanks for help Kind Regards Florian

4 3

Error drawing Graph
by Roman Romanyak 31 Oct '13

31 Oct '13

Hello everyone, I'm having strange issue, and spend a lot of time troubleshooting this without any success. Getting error 'error drawing graph' only for some devices only - EX4200 switches, which are located in the remote datacenter. After I started seeing issue, I install another switch here in local datacenter and added it to observium and its working good. Could be the issue in latency - the delay is about 30ms? discovery and poller scripts run good, the only thing I noticed that for the devices that don't work I in rrd/<device_name>/ files port-###.rrd are missing. The CPU and Memory graphs are working good, only network graphs are having errors. Thanks, Roman.

3 2

Re: [Observium] graphe on pose
by Adam Armstrong 31 Oct '13

31 Oct '13

This is most certainly related to network conditions or polling frequency. The poller must run every 5 minutes. Make sure you are running the latest version (svn update) Adam. Zoran Lukenic <z.lukenic(a)mediactive.fr> wrote: >I didn't know that the screenshot will not be able in the mail. >So I have problems with all graphs on all devices. My graphs are OK but they have some hole. Some time 30min, some time more. >I have this same devices on my cacti, behind same firewall and I don't have this problem. > >ps: I don't know if I do the right thing for answer. > >------------------------------ > >Message: 2 >Date: Wed, 30 Oct 2013 17:34:09 +0000 >From: Zoran Lukenic <z.lukenic(a)mediactive.fr> >To: "observium(a)observium.org" <observium(a)observium.org> >Subject: [Observium] graphe on pose >Message-ID: > <286037ABC3D0D74DB5172245EF4597970144239E(a)srv-exchange01.exchange.mediactive.fr> > >Content-Type: text/plain; charset="iso-8859-1" > >Hello, > >I have some problem with my graphe ( cf: screenshot ) > >I looked in FAQ and some Mailing Liste archive but I didn't find any one with the same problem. > >do you have some idea where to look? > > > > > > > > >--- >Zoran Lukenic >z.lukenic(a)mediactive.fr<mailto:z.lukenic@mediactive.fr> >--- >Groupe Mediactive >3-4-10, cit? Paradis 75010 Paris >Tel : +33 1 55 28 80 60 >Fax : +33 1 55 28 80 61 >Support technique : 0 892 494 777 >www.groupe-mediactive.fr<http://www.groupe-mediactive.fr/> >Twitter : @mediactivegroup >[cid:FB003B7F-1839-4401-8DAE-B37B718E4644] >

2 1

graphe on pose
by Zoran Lukenic 30 Oct '13

30 Oct '13

I didn't know that the screenshot will not be able in the mail. So I have problems with all graphs on all devices. My graphs are OK but they have some hole. Some time 30min, some time more. I have this same devices on my cacti, behind same firewall and I don't have this problem. ps: I don't know if I do the right thing for answer. ------------------------------ Message: 2 Date: Wed, 30 Oct 2013 17:34:09 +0000 From: Zoran Lukenic <z.lukenic(a)mediactive.fr> To: "observium(a)observium.org" <observium(a)observium.org> Subject: [Observium] graphe on pose Message-ID: <286037ABC3D0D74DB5172245EF4597970144239E(a)srv-exchange01.exchange.mediactive.fr> Content-Type: text/plain; charset="iso-8859-1" Hello, I have some problem with my graphe ( cf: screenshot ) I looked in FAQ and some Mailing Liste archive but I didn't find any one with the same problem. do you have some idea where to look? --- Zoran Lukenic z.lukenic(a)mediactive.fr<mailto:z.lukenic@mediactive.fr> --- Groupe Mediactive 3-4-10, cit? Paradis 75010 Paris Tel : +33 1 55 28 80 60 Fax : +33 1 55 28 80 61 Support technique : 0 892 494 777 www.groupe-mediactive.fr<http://www.groupe-mediactive.fr/> Twitter : @mediactivegroup [cid:FB003B7F-1839-4401-8DAE-B37B718E4644]

1 0

Alerts
by cbermudez＠tothus.net 30 Oct '13

30 Oct '13

Hi List. At present i have installed the latest versión of Observium and i am trying to configure an alert for a temperature sensor of a cisco catalyst and i do not how. On the other hand, i don´t have any alert in the home screen (right upper corner Alerts: 0), it is normal? i have rebooted some devices and disconnect some ports and the alerts still 0, but the emails with alerts are send correctly. Thanks so much. Cristian,

2 2

Cisco asa5510 ipsec tunnels
by cbermudez＠tothus.net 30 Oct '13

30 Oct '13

Hi list!! Configuring my asa device I have encounter a problem with the tunnels ipsecs. When I view the active tunnels on the observium interface, I see not only the actives, I see other tunnels ipsec or remote vpns connections ipsec that is not active really. It seem like the list of active tunnels is not updating. Thank you very much for the help. Cristian Enviado desde mi BlackBerry de Movistar (http://www.movistar.com.ar)

2 1

graphe on pose
by Zoran Lukenic 30 Oct '13

30 Oct '13

Hello, I have some problem with my graphe ( cf: screenshot ) I looked in FAQ and some Mailing Liste archive but I didn't find any one with the same problem. do you have some idea where to look? --- Zoran Lukenic z.lukenic(a)mediactive.fr<mailto:z.lukenic@mediactive.fr> --- Groupe Mediactive 3-4-10, cité Paradis 75010 Paris Tel : +33 1 55 28 80 60 Fax : +33 1 55 28 80 61 Support technique : 0 892 494 777 www.groupe-mediactive.fr<http://www.groupe-mediactive.fr/> Twitter : @mediactivegroup [cid:FB003B7F-1839-4401-8DAE-B37B718E4644]

2 1

traffic from transit/peering ports is not being generated
by Guilherme de Freitas Figueiredo 30 Oct '13

30 Oct '13

Gentlemen, I'm having trouble generating the graphics Transit / Peering, I put the description of the interface as described in the wiki ( http://www.observium.org/wiki/Interface_Description_Parsing), but when I go to the Ports menu -> Transit and Peering he do not show any graph. Below is some information about the descriptions: xe-0/0/0.3664 up up NTT Provider (AS2914) [2Gbps] Would be the case of removing part of [2Gbps]? He returns the following: Total Graph for ports of type: Transit None found. Regards! []s! -- Guilherme de Freitas Figueiredo

3 3

Custom Interface Port Speed
by cbermudez＠tothus.net 30 Oct '13

30 Oct '13

Hi list! I wonder f you could read my message. I´m very excited configuring observium, please anybody can help me with this issue? ------------------------------------------------------------------------ I am cristian from argentina, I have started using observium and I think that is a great tool! I am very happy with him!! I wonder if I could set specific speed value for a port of my router when at present I have connected my 6 Mbps internet connection. Tank you to all Cristian ------------------------------------------------------------------------

5 5

Upgrading to SVN stopped SNMP on my Zhones
by Brian Merrell 29 Oct '13

29 Oct '13

ZNID-GE-2424-NA-0GN- Zhone Indoor Network Interface Device; Release S2.5.073; We're looking at an 8 port zhone as well (better for triple play). I had 40 in that I need to monitor usage for but because of the SNMP issues affected by existing method of usage collection I have to take them out until I know i have a stable new setup for them with this. We have more but don't need to collect stats on all of them as that usually becomes somewhat cost prohibitive.

1 0

Re: [Observium] Upgrading to SVN stopped SNMP on my Zhones
by Adam Armstrong 29 Oct '13

29 Oct '13

Try the latest. It might have been bulkget breaking the SNMP stack. Brian Merrell <bmerrell(a)utopianet.org> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Upgrading to SVN stopped SNMP on my Zhones
by Brian Merrell 29 Oct '13

29 Oct '13

Code where this issue crops up appears to be 4711. 4710 looks like it works but 4711 seems to struggle through the poller process. I'm not sure that it isn't the discovery as I have gotten that exact and I'm still on a learning curve here. That said, 4710 is working right now on my zhones so I'm going keep testing on it.

1 0

Upgrading to SVN stopped SNMP on my Zhones
by Brian Merrell 29 Oct '13

29 Oct '13

Zhone's are being detected as "GENERIC" which is fine for as long as I get my port data. I started using Observium just last week and in the Open Source version and it gathered data fine all weekend for my Zhone switches. Changing over to the SVN and updating seems to be causing my zhones to stop responding to SNMP. Allied and Alcatel devices (which have the MIBS built in) work fine. Is there a specific SVN version that correlates to the Edition Split that I could try and go back too to see if that poller or discovery works better for these devices? Anybody else notice this? I've been looking for a couple hours and don't see much trouble with the poller like this lately.

2 2

Port speed interface
by cbermudez＠tothus.net 29 Oct '13

29 Oct '13

Hi list! I am cristian from argentina, I have started using observium and I think that is a great tool! I am very happy with him!! I wonder if I could set specific speed value for a port of my router when at present I have connected my 6 Mbps internet connection. Tank you to all Cristian

1 0

Frontpage map and jump page.
by Ryan Milton 29 Oct '13

29 Oct '13

Hi, After the update that changed the map, I not only what's in the picture, but when I click on the US marker, it takes me to colocation devices in Amsterdam, not to NYC. I have the paid version, consistently update. There must be something that I need to fix here. Any suggestions? Thanks, Ryan [cid:image003.jpg@01CED3C3.662D95B0] Regards, Ryan Milton MVS Network Manager o: 201-447-1505 x124 c: 862-249-5230 www.mvsusa.com<http://www.mvsusa.com/> [MVS final logo GOOD very small]

5 7

Percentage ratio between two graphs ?
by Will van Gulik 29 Oct '13

29 Oct '13

Hi Everyone, I'd be interested to know if there is a way to get some percentage ratio between two graphs. I was thinking of my transit and peering graphs for instance, but could be between two (or more) other graphs. Any ideas ? Maybe it's something already on the roadmap somewhere ? Regards, Will -- Will van Gulik IP-Max SA will.van.gulik(a)ip-max.net http://www.ip-max.net

1 0

Juniper MX memory issue
by Steve Rossen 29 Oct '13

29 Oct '13

Is anyone else using Observium on the Juniper MX80 platform? I know the MX960 is listed as supported but not the smaller one and we are seeing an odd memory issue that lines up perfectly with when we started polling it with Observium. Attached/linked image shows the last 12 months of memory usage on a MX5. Not sure if it is related to Observium or not so reaching out to see if other are seeing a similar slow memory climb or not. http://i.imgur.com/9PET5L3.png

6 6

pfSense SNMP daemon crashes after update to r4711
by Stefano Cordio 28 Oct '13

28 Oct '13

Hello guys, yesterday I updated my Observium (Centos 6.4) to the r4711 and I noticed that all my pfSense firewalls (5 hosts, two 2.0.3 and three 2.1) became down. On every host, the SNMP daemon was crashed. I tried to restart the daemon on every pfSense, but it crashed again and it seems to me that it crashes during the next cycle of polling (the discovery seems to go fine). Today I tried to update to the r4715 but I'm experiencing the same problem. Has anyone experienced something like that? How can I go deeper? Thanks for any hints, Kind Regards Stefano

4 8

'x' not working anymore in input fields
by Matthias Cramer 28 Oct '13

28 Oct '13

Hi I've noticed this afternoon that I'm no longer able to enter the character 'x' or 'X' in any input field. Pasting the character works but not normal keyboard input. All other characters seam to work as before. A work collogue has the same problem. So I think it's not the browser. The new behaviour seams to be on one of the changes since Thursday. I had a look at them and can't see and thing suspicious. I currently run svn version 4715. Any Idea where to look ... Regards Matthias -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zurich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250

2 2

EX4200/4550 VC - Port Polling ~200 Seconds
by Tyler Christiansen 28 Oct '13

28 Oct '13

Testing Observium, I've noticed that polling an EX4200/4550 with Observium takes about 200 seconds. There are around 300 ports, and I've noticed that Observium polls the logical interfaces as separate from the physical interfaces. I considered disabling logical interface polling, but the logical interfaces are used for a lot of port correlations, etc. Cacti with Spine takes 13 seconds to poll everything in our network, and Cacti with the PHP poller takes maybe 2 minutes to poll everything in our network. Because of Cacti's ability to handle this particular device (even with its PHP poller), I'm pretty convinced that the issue isn't the device. I've checked interface, memory, and CPU utilization on the Observium server as well as the device and the network in-between. Everything is fine. I've also turned Cacti off to ensure there was no strange clash. I also turned polling off for all ports that were in a "down" state and disabled those ports in the switch as well. It almost seems that Observium's poller walks one OID at a time in serial, or otherwise does some ridiculously complex discovery on every poll that it doesn't need to do. Cacti does bulk requests, so it gets around 50 OIDs per request to the switch stack. Is it possible that I'm missing something in the Observium configuration? Thanks! --Tyler

7 15

Rancid Integration
by Ryan Milton 27 Oct '13

27 Oct '13

When I include the rancid integration...where should "anything" show up? Is there a chart, graph, or something, or is it the email updates? Regards, Ryan Milton MVS Network Manager o: 201-447-1505 x124 c: 862-249-5230 www.mvsusa.com<http://www.mvsusa.com/> [MVS final logo GOOD very small]

6 11

test plz ignore
by Nikolay Shopik 25 Oct '13

25 Oct '13

3 4

Nan graph
by PUB 24 Oct '13

24 Oct '13

Hello Adam, I have install my new observium from svn trunk, but all my graph display -Nan I have some information into rrd directory, i have recreate it, and after i launch poller, rrd have some files with some data, but, no graph displayed. Poller with debug mod, no more informations. Regards

3 3

RRD, Graphs and Draw Errors
by Moermond, Timothy 24 Oct '13

24 Oct '13

Hi, I recently updated to the subscription model of observium and did a clean install, but did use my old config.php file. I have several pages where the graphs show draw errors. I have tried setting the permissions on the RRD to apache:apache as indicated in the instructions, which did not seem to change the behavior. I then switched it to root:root, which also does not seem to change the behavior. I reviewed the information on RRD and Graph issues from the mailing list archives, unfortunately the couple of items I found to try did not seem to change the issue either. I did remove the ?> tag and the remaining white space at the end of the config.php file. I have attached a screen shot of the current permissions for the RRD directory and a screen of from one of the pieces of equipment showing the draw error. Some graphs appear to draw but do not contain data such as the CPU graphs. I am not sure how to proceed to further isolate what may be wrong. I have verified the path to the RRD directory and Executable on the system and checked that they were good in the config.php file. Thank you, Tim

2 4

Re: [Observium] mini-/micrographs stacked / aggregated?
by Adam Armstrong 23 Oct '13

23 Oct '13

See, no pictures. Also, I do believe that innthis instance it's Paul who needs to convince me to put up with the crappy code his customer asked him to get included. :) I'm the one who knocks! Adam. Peter Childs <pchilds(a)staff.iinet.net.au> wrote: > >Lol > >http://en.wikipedia.org/wiki/How_to_Win_Friends_and_Influence_People > > >On 24/10/13 12:18 PM, "Adam Armstrong" <adama(a)memetic.org> wrote: > >>On 2013-10-24 02:25, Paul Gear wrote: >>> On 10/24/2013 10:15 AM, Adam Armstrong wrote: >>> ... >>> I hope you now have some small amount of understanding about why I >>> didn't want to commit the patch in the first place, and why we tend to >>> view contributions as often more of a burden than a help. >>> >>> An analogy I've often made is that "donating" code to an open source >>> project is like "donating" a child to an orphanage. Thankfully in this >>> case, the original deadbeat dad has come back to clean up the poop. >>> >>> You've been reading Dale Carnegie again, haven't you, Adam? >> >>That is unlikely, unless it has a lot of pictures. >> >>adam. >>_______________________________________________ >>observium mailing list >>observium(a)observium.org >>http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

mini-/micrographs stacked / aggregated?
by Andreas Rüdel 23 Oct '13

23 Oct '13

Greetings Is there a way we can create "aggregated" (or "stacked") mini-/micrographs for the frontpage? using this syntax $config['frontpage']['minigraphs']['ids'] = "19418,port_bits,Dist76-01.AMS4;19496,port_bits,NAME"; or this: $config['frontpage']['micrographs']['RING']['ids'] = "19414,port_bits,NAME;19492,port_bits,NAME2;19439,port_bits,NAME3"; results in several graphs next to each other. what we are after is in "mini" or "micro" what we can do it using "custom" traffic graphs - but they are too big for what we are trying to do... $config['frontpage']['custom_traffic']['ids'] = "19418,19496"; <-- this actually stacks the data into one graph thanks for any pointers! Andreas

5 10

Radius Auth on Win2k8 NPS - malformed message
by Christian Hügel 23 Oct '13

23 Oct '13

Hi, I try to configure observium with radius auth against a (working) win2k8 NPS Server; this failes with the follwing error message on the server: "A malformed RADIUS message was received from client %1. The data is the RADIUS message." http://technet.microsoft.com/en-us/library/cc735403%28v=ws.10%29.aspx Any hints why radius auth doesn´t work in Observium? Chris

4 8

Adduser Fails; Deleteuser Works
by Ron Wingfield 22 Oct '13

22 Oct '13

1 0

Re: [Observium] Random Unicode Characters in BGP Polling / hex2ip
by Mike Stupalov 22 Oct '13

22 Oct '13

On 21.10.2013 15:52, Bastiaan Topper wrote: > Hi Mike, > > Hereby the discovery output. > > In our case it is ASR1001 router with Cisco IOS-XE 15.2(2)S1 (UNIVERSALK9). Another tip, as it looks like a bug in IOS-XE, I suggest you update to the latest stable version. Latest for IOS 15.2 - Release 3.7.4S (asr1001-universalk9.03.07.04.S.152-4.S4.bin) http://www.cisco.com/en/US/docs/routers/asr1000/release/notes/asr1k_rn_rel_… In fixed caveats list there is: https://tools.cisco.com/bugsearch/bug/CSCua40790 > > Regards, > > Bastiaan > > -----Original Message----- > From: Mike Stupalov [mailto:landy2005@gmail.com] > Sent: maandag 21 oktober 2013 13:06 > To: Bastiaan Topper; Observium Network Observation System > Subject: Re: [Observium] Random Unicode Characters in BGP Polling / hex2ip > > On 21.10.2013 14:11, Bastiaan Topper wrote: >> Hi, >> >> >> >> I have kind of the same problem, but this time with Cisco ASR routers. >> As you can see below. >> >> >> >> >> >> I included the poller debug outputs. > > > Ohh, nice. > Thanks for debug outputs! > > Please send also debug out for discovery. > And tell ASR model and OS version. > > >> The correct output (from a Cisco IOS router): >> >> bgpPeerLocalAddr >> >> bgpPeerLocalAddr.149.14.34.41 = 149.14.34.42 >> >> bgpPeerLocalAddr.172.30.253.3 = 172.30.253.66 >> >> bgpPeerLocalAddr.172.30.253.4 = 172.30.253.66 >> >> >> >> The wrong output (from a Cisco ASR router): >> >> cbgpPeer2LocalAddr >> >> cbgpPeer2LocalAddr.20." ..|(..........." = "20 01 06 7C 28 D4 00 00 00 >> 00 00 00 00 00 00 03 " >> >> cbgpPeer2LocalAddr.20." ..|(..........." = "20 01 06 7C 28 D4 00 00 00 >> 00 00 00 00 00 00 03 " >> >> cbgpPeer2LocalAddr.20." ..|(..........3" = "20 01 06 7C 28 D4 00 00 00 >> 00 00 00 00 00 00 03 " >> >> cbgpPeer2LocalAddr.20." ..|(..........4" = "20 01 06 7C 28 D4 00 00 00 >> 00 00 00 00 00 00 03 " >> >> cbgpPeer2LocalAddr.20." ..|(..........e" = "20 01 06 7C 28 D4 00 00 00 >> 00 00 00 00 00 00 03 " >> >> cbgpPeer2LocalAddr.20." ..|(..........f" = "20 01 06 7C 28 D4 00 00 00 >> 00 00 00 00 00 00 03 " >> >> cbgpPeer2LocalAddr.20." ..|(..........g" = "20 01 06 7C 28 D4 00 00 00 >> 00 00 00 00 00 00 03 " >> >> cbgpPeer2LocalAddr.ipv4."172.30.253.1" = "AC 1E FD 03 " >> >> cbgpPeer2LocalAddr.ipv4."172.30.253.4" = "AC 1E FD 03 " >> >> cbgpPeer2LocalAddr.ipv4."172.30.253.33" = "AC 1E FD 03 " >> >> cbgpPeer2LocalAddr.ipv4."172.30.253.34" = "AC 1E FD 03 " >> >> cbgpPeer2LocalAddr.ipv4."172.30.253.65" = "AC 1E FD 03 " >> >> cbgpPeer2LocalAddr.ipv4."172.30.253.66" = "AC 1E FD 03 " >> >> cbgpPeer2LocalAddr.ipv4."172.30.253.67" = "AC 1E FD 03 " >> >> >> >> It looks like Observium is showing the first output correct, but not the >> second. Can this be fixed someway? >> >> >> >> Regards, >> >> Bastiaan >> >> >> >> *From:*Tom Paseka [mailto:tom+lists@cloudflare.com] >> *Sent:* vrijdag 18 oktober 2013 22:47 >> *To:* Mike Stupalov >> *Cc:* Observium Network Observation System >> *Subject:* Re: [Observium] Random Unicode Characters in BGP Polling / hex2ip >> >> >> >> Resolution: >> >> >> >> # echo $LANG >> >> en_GB >> >> # export LANG=en_GB.UTF-8 >> >> >> >> On Fri, Oct 18, 2013 at 12:40 AM, Mike Stupalov <landy2005(a)gmail.com >> <mailto:landy2005@gmail.com>> wrote: >> >> On 18.10.2013 10:24, Tom Paseka wrote: >> > Looks like a bug in snmp on the box - a raw snmpget shows the same >> > weirdness. >> > >> > Sorry for noise! >> >> Anyway, please send an output for debug poller/discovery. >> >> Also note that you need to do snmpget with option -On, >> because net-snmp default tries to translate hex data into string.. >> >> >> > >> > >> > On Thu, Oct 17, 2013 at 11:09 PM, Mike Stupalov >> <landy2005(a)gmail.com <mailto:landy2005@gmail.com> >> >> > <mailto:landy2005@gmail.com <mailto:landy2005@gmail.com>>> wrote: >> > >> > Please pastebin (on send file) for debug polling out: >> > php ./poller.php -d -m bgp-peers -h <your_juniper> > >> /tmp/poller.out >> > >> > also for discovery (if possible): >> > php ./discovery.php -d -m bgp-peers -h <your_juniper> > >> > /tmp/discovery.out >> > >> > -- >> > Mike Stupalov >> > >> >> > Tom Paseka __ 18 октября 2013 г. 5:31:10 написал: >> >> > >> >> <snip> >> >> [jnxBgpM2PeerRemoteAddr] => � |� >> >> [jnxBgpM2PeerLocalAddr] => � }< >> >> <snip> >> >> >> >> Is this well known? >> > >> > >> >> -- >> Mike Stupalov >> >> >> > > -- Mike Stupalov

4 5

Alerting and how to send alert ?
by Xavier Beaudouin 22 Oct '13

22 Oct '13

Hi ! I have looking on the wiki page about alerts, but the only thing I dunno, is... how to send alert to <something/someone>. Any clues ? Regards, Xavier -- Xavier Beaudouin - Senior Network and System Administrator Infrastructure and network director Horizon Software - http://www.hsoftware.com/ 13 rue La Fayette - 75009 PARIS - France Phone: +33 (0)1 4260 9490 Fax: +33 (0)1 44 56 97 01

5 7

Storage alerting
by Sander Steffann 22 Oct '13

22 Oct '13

Hi, I added some alerts for storage some time ago but they don't seem to work (yet?). This is how I created the checker: As you can see 130 checks are created but none of them is checked. Should I just have a bit more patience or does this need some debugging? :-) Cheers, Sander

2 6

Re: [Observium] Random Unicode Characters in BGP Polling / hex2ip
by Bastiaan Topper 22 Oct '13

22 Oct '13

Hi Mike, After your patch, it still isn't completely working. In the first screenshot (18:31) I manually triggered a discovery. The second minute I also manually triggered the poller. In fact 3 things are going wrong. - First the discovery fixes the IP addresses (ipv6) for the missing rows and second the poller removes the IPv6 addresses. - The second column for the IPv6 address still gives strange characters. - Last; the ip addresses (ipv4) are still wrongly formatted. I also included some debug logs again. Hopefully you can fix this. Regards, Bastiaan ________________________________________ Van: Mike Stupalov [landy2005(a)gmail.com] Verzonden: maandag 21 oktober 2013 13:06 Aan: Bastiaan Topper; Observium Network Observation System Onderwerp: Re: [Observium] Random Unicode Characters in BGP Polling / hex2ip On 21.10.2013 14:11, Bastiaan Topper wrote: > Hi, > > > > I have kind of the same problem, but this time with Cisco ASR routers. > As you can see below. > > > > > > I included the poller debug outputs. Ohh, nice. Thanks for debug outputs! Please send also debug out for discovery. And tell ASR model and OS version. > The correct output (from a Cisco IOS router): > > bgpPeerLocalAddr > > bgpPeerLocalAddr.149.14.34.41 = 149.14.34.42 > > bgpPeerLocalAddr.172.30.253.3 = 172.30.253.66 > > bgpPeerLocalAddr.172.30.253.4 = 172.30.253.66 > > > > The wrong output (from a Cisco ASR router): > > cbgpPeer2LocalAddr > > cbgpPeer2LocalAddr.20." ..|(..........." = "20 01 06 7C 28 D4 00 00 00 > 00 00 00 00 00 00 03 " > > cbgpPeer2LocalAddr.20." ..|(..........." = "20 01 06 7C 28 D4 00 00 00 > 00 00 00 00 00 00 03 " > > cbgpPeer2LocalAddr.20." ..|(..........3" = "20 01 06 7C 28 D4 00 00 00 > 00 00 00 00 00 00 03 " > > cbgpPeer2LocalAddr.20." ..|(..........4" = "20 01 06 7C 28 D4 00 00 00 > 00 00 00 00 00 00 03 " > > cbgpPeer2LocalAddr.20." ..|(..........e" = "20 01 06 7C 28 D4 00 00 00 > 00 00 00 00 00 00 03 " > > cbgpPeer2LocalAddr.20." ..|(..........f" = "20 01 06 7C 28 D4 00 00 00 > 00 00 00 00 00 00 03 " > > cbgpPeer2LocalAddr.20." ..|(..........g" = "20 01 06 7C 28 D4 00 00 00 > 00 00 00 00 00 00 03 " > > cbgpPeer2LocalAddr.ipv4."172.30.253.1" = "AC 1E FD 03 " > > cbgpPeer2LocalAddr.ipv4."172.30.253.4" = "AC 1E FD 03 " > > cbgpPeer2LocalAddr.ipv4."172.30.253.33" = "AC 1E FD 03 " > > cbgpPeer2LocalAddr.ipv4."172.30.253.34" = "AC 1E FD 03 " > > cbgpPeer2LocalAddr.ipv4."172.30.253.65" = "AC 1E FD 03 " > > cbgpPeer2LocalAddr.ipv4."172.30.253.66" = "AC 1E FD 03 " > > cbgpPeer2LocalAddr.ipv4."172.30.253.67" = "AC 1E FD 03 " > > > > It looks like Observium is showing the first output correct, but not the > second. Can this be fixed someway? > > > > Regards, > > Bastiaan > > > > *From:*Tom Paseka [mailto:tom+lists@cloudflare.com] > *Sent:* vrijdag 18 oktober 2013 22:47 > *To:* Mike Stupalov > *Cc:* Observium Network Observation System > *Subject:* Re: [Observium] Random Unicode Characters in BGP Polling / hex2ip > > > > Resolution: > > > > # echo $LANG > > en_GB > > # export LANG=en_GB.UTF-8 > > > > On Fri, Oct 18, 2013 at 12:40 AM, Mike Stupalov <landy2005(a)gmail.com > <mailto:landy2005@gmail.com>> wrote: > > On 18.10.2013 10:24, Tom Paseka wrote: > > Looks like a bug in snmp on the box - a raw snmpget shows the same > > weirdness. > > > > Sorry for noise! > > Anyway, please send an output for debug poller/discovery. > > Also note that you need to do snmpget with option -On, > because net-snmp default tries to translate hex data into string.. > > > > > > > > On Thu, Oct 17, 2013 at 11:09 PM, Mike Stupalov > <landy2005(a)gmail.com <mailto:landy2005@gmail.com> > > > <mailto:landy2005@gmail.com <mailto:landy2005@gmail.com>>> wrote: > > > > Please pastebin (on send file) for debug polling out: > > php ./poller.php -d -m bgp-peers -h <your_juniper> > > /tmp/poller.out > > > > also for discovery (if possible): > > php ./discovery.php -d -m bgp-peers -h <your_juniper> > > > /tmp/discovery.out > > > > -- > > Mike Stupalov > > > > > Tom Paseka __ 18 октября 2013 г. 5:31:10 написал: > > > > >> <snip> > >> [jnxBgpM2PeerRemoteAddr] => � |� > >> [jnxBgpM2PeerLocalAddr] => � }< > >> <snip> > >> > >> Is this well known? > > > > > > -- > Mike Stupalov > > > -- Mike Stupalov

2 1

Observium Installation Startup and Configuration -- Perhaps $PATH Problems?
by Ron Wingfield 21 Oct '13

21 Oct '13

5 11

Subscription
by Christian Hügel 21 Oct '13

21 Oct '13

Hi, is there another way to pay for the subscription instead of paypal/visa card? Like invoice with SEPA IBAN/BIC transfer? Cheers, Chris

2 1

Re: [Observium] poller-wrapper.py not working on FreeBSD9.1
by Borja Marcos 21 Oct '13

21 Oct '13

Hello, I 've been using Observium on FreeBSD 9.2 and now 10-BETA1 The most important difference between FreeBSD and some Linux distributions is where stuff is installed. The default installation of Observium uses /usr/bin as the path for many commands (snmp, Python, etc) and FreeBSD keeps a strict separation between the base system and the optional ports/packages. Nothing dramatic, but they belong under /usr/local/bin instead of /usr/bin, /usr/local/lib instead of /usr/lib... This is a list of the paths that should point to /usr/local. Note that Python and PHP are in /usr/local/bin, not /usr/bin (where the Observium files expect to find them). ./discovery.php:#!/usr/bin/env /usr/local/bin/php ./poll-billing.php:#!/usr/bin/env /usr/local/bin/php ./poller.php:#!/usr/bin/env /usr/local/bin/php ./includes/defaults.inc.php:$config['rrdtool'] = "/usr/local/bin/rrdtool"; ./includes/defaults.inc.php:$config['fping'] = "/usr/local/sbin/fping"; ./includes/defaults.inc.php:$config['fping6'] = "/usr/local/sbin/fping6"; ./includes/defaults.inc.php:$config['snmpwalk'] = "/usr/local/bin/snmpwalk"; ./includes/defaults.inc.php:$config['snmpget'] = "/usr/local/bin/snmpget"; ./includes/defaults.inc.php:$config['snmpbulkwalk'] = "/usr/local/bin/snmpbulkwalk"; ./includes/defaults.inc.php:$config['snmptranslate'] = "/usr/local/bin/snmptranslate"; ./includes/defaults.inc.php:$config['mtr'] = "/usr/local/sbin/mtr"; ./includes/defaults.inc.php:$config['nmap'] = "/usr/local/bin/nmap"; ./includes/defaults.inc.php:$config['dot'] = "/usr/local/bin/dot"; ./includes/defaults.inc.php:$config['unflatten'] = "/usr/local/bin/unflatten"; ./includes/defaults.inc.php:$config['neato'] = "/usr/local/bin/neato"; ./includes/defaults.inc.php:$config['sfdp'] = "/usr/local/bin/sfdp"; ./includes/defaults.inc.php:$config['svn'] = "/usr/local/bin/svn"; ./config.php:$config['nfsen_rrds'] = "/usr/local/nfsen/profiles-stat/live/"; ./poller-wrapper.py:#! /usr/bin/env /usr/local/bin/python I know I shouldn't have modified includes/defaults.inc.php, but I did it before I realized I should change it in config.php. Start by checking your paths, make sure that Observium can find Python, PHP, Net-SNMP, etc. Borja.

2 5

Re: [Observium] poller-wrapper.py not working on FreeBSD9.1
by Adam Armstrong 21 Oct '13

21 Oct '13

Man, freebsd is so retarded. Adam. Borja Marcos <borjam(a)sarenet.es> wrote: > >On Oct 21, 2013, at 2:08 PM, Tom Laermans wrote: > >> On 21/10/2013 14:02, Borja Marcos wrote: >>> ./discovery.php:#!/usr/bin/env /usr/local/bin/php >>> ./poll-billing.php:#!/usr/bin/env /usr/local/bin/php >>> ./poller.php:#!/usr/bin/env /usr/local/bin/php >>> >> This makes 0 sense. > >If you add the PATH to the crontab, yes, it doesn't make sense. If you don't, FreeBSD has a minimal default PATH offered to >the crontab commands, which doesn't include /usr/local/bin. > > > > > > >Borja. > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

+1 @ eigrp
by Rob VanHooren 21 Oct '13

21 Oct '13

is not on the currently-implemented feature list, but would sure appreciate it too. R. Typogaphical errors courtesy of iPad > On Oct 21, 2013, at 8:06, observium-request(a)observium.org wrote: > > I just wanted to ask if there was any consideration for EIGRP routing tables and stats support in the future? > > Kind Regards > RC

1 0

Re: [Observium] poller-wrapper.py on FreeBSD9.1
by Rutger Bevaart 21 Oct '13

21 Oct '13

> On 21 okt. 2013, at 11:56, observium-request(a)observium.org wrote: > > From: Tom Laermans <tom.laermans(a)powersource.cx> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] poller-wrapper.py not working on FreeBSD? > Message-ID: <5264FA2F.1070908(a)powersource.cx> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > >> On 10/21/2013 11:39 AM, Michiel Klaver wrote: >> When using /etc/crontab file, remove the user column (root). It should be >> something like: >> >> */5 * * * * /opt/observium/poller-wrapper.py > /tmp/poller-wrapper-output 2>&1 > *BZZT* You're not very awake dear... ;) > > Tom I know the basic freebsd cron syntax, the regular poller is working fine. I'll try to do some tracing and get some more debugging. Tips greatly appreciated! Regards, Rutger

1 0

EIGRP Support
by Randy Coburn 21 Oct '13

21 Oct '13

Hi All, I just wanted to ask if there was any consideration for EIGRP routing tables and stats support in the future? Kind Regards RC NewVoiceMedia are proud gold sponsors of Dreamforce. Use our promo code EC13NEWVO to register and save $100: [Dreamforce | Join The Customer Company Revolution | Nov 18-21, 2013 | San Francisco]<http://www.salesforce.com/dreamforce/> www.newvoicemedia.com<http://www.newvoicemedia.com> Click here<http://www.newvoicemedia.com/customers/> to see what our customers think Click here<http://sites.force.com/appexchange/listingDetail?listingId=a0N300000025yAGE…> to see our integration with salesforce.com Follow NewVoiceMedia on Facebook<http://www.facebook.com/pages/NewVoiceMedia/137330659646514?v=wall>, Flickr<http://www.flickr.com/photos/newvoicemedia/>, LinkedIn<http://www.linkedin.com/company/newvoicemedia>, Twitter<https://twitter.com/NewVoiceMedia> Registered Office: NewVoiceMedia Ltd, Belvedere, Basing View, Basingstoke, Hampshire. RG21 4HG. NewVoiceMedia Registered in England No: 3602868 This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of NewVoiceMedia. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error.

1 1

Random Unicode Characters in BGP Polling / hex2ip
by Tom Paseka 21 Oct '13

21 Oct '13

<snip> [jnxBgpM2PeerRemoteAddr] => � |� [jnxBgpM2PeerLocalAddr] => � }< <snip> Is this well known?

5 9

Subscription Observium
by Lützenkirchen, Dominic 21 Oct '13

21 Oct '13

Hello, I would like to order the following article: - 1x Subscription Observium (network monitoring tool) for 1 Year (link: http://www.observium.org/subscribe.php) For this I must input the article in our system. So that I can input the article, I need the following information: -articlenumber -articletext Please give me the required information. Thanks & greetings from Germany. Mit freundlichen Grüßen / Kind regards, Dominic Lützenkirchen | Vertrieb ITZ Informationstechnologie GmbH Heinrich-Held-Straße 16 | 45133 Essen Tel: +49 (0)201 24714-55 | Fax: +49 (0)201 24714-33 | E-Mail: dominic.luetzenkirchen(a)itz-essen.de<mailto:dominic.luetzenkirchen@itz-essen.de> Ein Unternehmen der Bechtle Gruppe Amtsgericht Essen HRB: 10707 | Geschäftsführer: Peter Heinrichs, Thomas Stachorra

1 0

Error while adding localhost. Problem with SNMP
by Gokul Kannan 21 Oct '13

21 Oct '13

Hi All, For some reason, I couldn’t add localhost itself. I guess the problem is with SNMP. Please find the error messages and logs below. Would be great if anyone could help. [root@server observium]# ./add_device.php localhost Obs3rv1um v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Observium v0.13.10.4585 Add Device USAGE: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] add_device.php <hostname> [any|nanp|anp|ap] [v3] [user] [password] [enckey] [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6] EXAMPLE: SNMPv1/2c: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] SNMPv3 : Defaults : add_device.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6] No Auth, No Priv : add_device.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6] Auth, No Priv : add_device.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6] Auth, Priv : add_device.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6] Remember to run discovery for the device afterwards. This is my /etc/sysconfig/snmpd file # snmpd command line options OPTIONS="-Lsd -Lf /dev/null -p /var/run/snmpd.pid -a" This is my /etc/snmp/snmpd.conf file com2sec readonly default 0bs3rv1um group MyROGroup v2c readonly view all included .1 80 access MyROGroup "" any noauth exact all none none syslocation Rack, Room, Building, City, Country [GPSX,Y] syscontact Your Name <your(a)email.address> #Distro Detection extend .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro ~ ~ Whenever I do “service snmpd restart”, I can see the following error message in /var/log/messages Oct 20 14:09:47 server snmpd[10038]: Received TERM or STOP signal... shutting down... Oct 20 14:09:47 server snmpd[10055]: NET-SNMP version 5.5 Appreciate your time and assistance. Thanks, Gokul

6 11

- delete user
by Paolo De Michele 21 Oct '13

21 Oct '13

hi everybody, how I do to remove a user? I have previously used the command: # ./adduser.php username password level how can I fix? thanks in advance - p

2 3

Re: [Observium] observium Digest, Vol 39, Issue 74
by Rutger Bevaart 21 Oct '13

21 Oct '13

On Oct 20, 2013, at 3:48 PM, observium-request(a)observium.org wrote: > What errors or information does it give when you run it on the command > line? > > Kind regards, > > Job Hi Job ;-) No errors are shown in the cron, it merely logs that it has run the command. With regards to the question of "why FreeBSD?", that's personal preference. I'm more comfortable troubleshooting on FreeBSD than on Linux… Is there any way to make poller-wrapper.py produce more logging? (I admit not going through the code). Regards Rutger

5 4

poller-wrapper.py not working on FreeBSD?
by Rutger Bevaart 21 Oct '13

21 Oct '13

I have the following line in my /etc/crontab on FreeBSD9.1: */5 * * * * root /opt/observium/poller-wrapper.py 1 >> /dev/null 2>&1 I can manually run the poller (as root) but all monitored interfaces go to '0'. Somehow it seems that the poller-wrapper is not able to insert the data into the RRDs. root@server:/opt/observium # ./poller-wrapper.py 8 INFO: starting the poller at 1382106842.7 with 8 threads, slowest devices first INFO starting alerter.php for 2 INFO finished alerter.php for 2 INFO: worker Thread-7 finished device 2 in 7 seconds INFO starting alerter.php for 8 INFO finished alerter.php for 8 INFO: worker Thread-6 finished device 8 in 9 seconds INFO starting alerter.php for 7 INFO finished alerter.php for 7 INFO: worker Thread-2 finished device 7 in 10 seconds INFO starting alerter.php for 6 INFO finished alerter.php for 6 INFO: worker Thread-5 finished device 6 in 11 seconds INFO starting alerter.php for 1 INFO finished alerter.php for 1 INFO: worker Thread-4 finished device 1 in 12 seconds INFO starting alerter.php for 4 INFO finished alerter.php for 4 INFO: worker Thread-3 finished device 4 in 14 seconds INFO starting alerter.php for 5 INFO finished alerter.php for 5 INFO: worker Thread-1 finished device 5 in 16 seconds INFO: poller-wrapper polled 7 devices in 16 seconds with 8 workers Also, the regular poller does not work when moved to /etc/crontab, stragely enough it runs just fine from the crontab for user root (edited using 'crontab -e'). Any clues? Any way to verify where it is not working? Regards Rutger

3 2

Re: [Observium] Empty ADSL and SLA rrd
by David George 21 Oct '13

21 Oct '13

Hi All, has anyone ran into the below? is it something that I've configured incorrectly? From: David George Sent: Tuesday, 15 October 2013 8:51 AM To: 'observium(a)observium.org' Subject: Empty ADSL and SLA rrd Morning all, I've just started trailing observium, and it's looking like a great system. Router health and interface counters seems to be logged and graphed correctly, so it's starting to look like a viable alternative to some of the larger closed source systems. I especially like the simplicity of the design which should allow for some additional sensor development down the that I'll submit back. So kudos on the system, I quite like it. Now - onto the issue, and I'm assuming given the size of the user-base this is likely to be configuration, but I've read and re-read the related doco and I'm unable to find anything wrong. I've added a Cisco 877 device, port counters and health are being logged and graphed correctly, but the ip-sla statistics and adsl line statistics are not. The header line includes dsl stats, and those stats appear to update according to the polling schedule, but the graphs do not. Also, the file timestamp is NOT updating on the adsl RRD file. it is however updating on the sla rrd file. rrdtool dump reveals that the rrd file contains no rows that have a value. config file contains $config['enable_ports_adsl'] = 1; # Enable ADSL-LINE-MIB $config['enable_sla'] = 1; Observium CE 0.13.10.4585 Apache 2.2.22 (Ubuntu) PHP 5.3.10-1ubuntu3.8 MySQL 5.5.29-0ubuntu0.12.04.1 RRDtool 1.4.7 [cid:image001.png@01CECE80.E0CDC300] [cid:image002.png@01CECE80.E0CDC300]

1 0

Re: [Observium] poller-wrapper.py not working on FreeBSD9.1
by Rutger Bevaart 20 Oct '13

20 Oct '13

On Oct 19, 2013, at 1:00 PM, observium-request(a)observium.org wrote: > > Hi, > > On 18/10/13 15:35, Rutger Bevaart wrote: >> Any clues? > > I had a simliar issue, but following the documentation I got it working: > > Add cron jobs, create a new file /etc/cron.d/observium with the > following contents: > > Thanks > Marcus Unfortunately that doesn't work on FreeBSD as it does not use a nested cron.d setup. I re-read the docs a zillion times but obviously I must overlook something truly basic. What bothers me is that poller-wrapper.py doesn't work from the command line either, which means I must have something wrong in my install somewhere… Anybody using Observium on FreeBSD willing to share their cron setup? Thanks in advance, Rutger

2 1

Making use of hdarray
by Henri Watson 19 Oct '13

19 Oct '13

Hi all, I've been trying to make use of hdarray (added in http://jira.observium.org/browse/OBSERVIUM-233) but it seems like there's a bit of an issue with the patch: it doesn't contain the actual observium-agent module. The patch seems to have been merged into SVN's devel branch (http://www.observium.org/svn/observer/branches/devel/includes/polling/unix-…, for example) but there's no hdarray module in SVN's devel branch either (see http://www.observium.org/svn/observer/branches/devel/scripts/agent-local/) which should rule out the possibility of it being added in right after. Am I looking in the wrong place or is the hdarray module simply missing? Cheers, Henri Watson

1 0

Re: [Observium] graphics problem
by Adam Armstrong 19 Oct '13

19 Oct '13

You added it to the wrong crontab file because you didn't follow the instructions, despite the giant red box I recently added to make it super clear which file to add it to. Adam. Paolo De Michele <paolo(a)paolodemichele.it> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] graphics problem
by Adam Armstrong 19 Oct '13

19 Oct '13

You have almost certainly added them to the wrong cron file in the wrong format. Follow the instructions. Adam. Paolo De Michele <paolo(a)paolodemichele.it> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

graphics problem
by Paolo De Michele 19 Oct '13

19 Oct '13

Hi, yesterday I installed paul software according to the official documentation. I have successfully added the first servers (. / hostname add_device community versionsnmp). I see the tables of graphics but these are not populated with the actual employment. only yesterday just added the apparatus has plotted a bit. this is a section on the memory (ram) but I have all the same (see attached link: https://www.dropbox.com/s/3xjbnjcp7rsdoat/snapshot3.png) I also, as indicated in the wiki, added the following strings in crontab 33 */6 * * * root /opt/observium/discovery.php -h all >> /dev/null 2>&1 */5 * * * * root /opt/observium/discovery.php -h new >> /dev/null 2>&1 */5 * * * * root /opt/observium/poller-wrapper.py 1 >> /dev/null 2>&1 I reloaded the crond service: /etc/init.d/crond reload what is the problem? how can I solve it? thanks in advance greetings

1 0

Syslog-ng integration
by Randy Coburn 17 Oct '13

17 Oct '13

Hi All, I was wondering if someone could help with the syslog-ng intergration. For some reason not all my switches seem to be getting logs even though the syslogs are getting sent to the observium server. Below is the syslog-ng config. ## Observium Syslog-ng config chain_hostnames(0); keep_hostname(yes); use_dns(no); ## Observium Syslog-ng config ## Observium Syslog-ng config source s_net { udp(ip(0.0.0.0) port(5544)); udp(ip(0.0.0.0) port(514)); }; destination d_observium { program("/opt/observium/syslog.php" template ("$HOST||$FACILITY||$PRIORITY||$LEVEL||$TAG||$YEAR-$MONTH-$DAY $HOUR:$MIN:$SEC||$MSG||$PROGRAM\n") template-escape(yes)); file("/var/log/observium"); }; log { source(s_net); destination(d_observium); }; ## Observium Syslog-ng config As you can see I have a file syslog to show that the logs are coming in. What parameters does observium need to log a syslog message against a device. Randy Coburn NewVoiceMedia are proud gold sponsors of Dreamforce. Use our promo code EC13NEWVO to register and save $100: [Dreamforce | Join The Customer Company Revolution | Nov 18-21, 2013 | San Francisco]<http://www.salesforce.com/dreamforce/> www.newvoicemedia.com<http://www.newvoicemedia.com> Click here<http://www.newvoicemedia.com/customers/> to see what our customers think Click here<http://sites.force.com/appexchange/listingDetail?listingId=a0N300000025yAGE…> to see our integration with salesforce.com Follow NewVoiceMedia on Facebook<http://www.facebook.com/pages/NewVoiceMedia/137330659646514?v=wall>, Flickr<http://www.flickr.com/photos/newvoicemedia/>, LinkedIn<http://www.linkedin.com/company/newvoicemedia>, Twitter<https://twitter.com/NewVoiceMedia> Registered Office: NewVoiceMedia Ltd, Belvedere, Basing View, Basingstoke, Hampshire. RG21 4HG. NewVoiceMedia Registered in England No: 3602868 This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of NewVoiceMedia. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error.

1 0

why is the DNS query rate so high?
by David Newman 17 Oct '13

17 Oct '13

Thanks for clues in troubleshooting a problem with high DNS query rates from Observium. I've been looking at Observium for network monitoring, and really like it so far, except that makes repeated DNS queries at a very high rate. For example, an Observium box monitors an old Cisco 2651XM router in the same physical location. Running a capture on the DNS server, we see the Observium box made over 200 queries for the router's hostname in a 7-second interval. Also, the DNS server correctly responded to every one of these, usually within 20 ms. What would cause so many DNS queries (and apparent non-caching of the responses)? This behavior is thrashing the logs on the DNS servers. This is with Observium Community Edition 0.13.10.4586 running on Debian Wheezy. Thanks again dn

12 25

Ldap ad authentication levels
by F.Reenders＠utwente.nl 17 Oct '13

17 Oct '13

Hi, Is there someone who has the permission levels like 10 for admin working with ad ldap groups? The ad ldap authentication itself is working for me but I get a screen with 0 devices then. If it just doesn't work I can stop trying. Regards, Frederik Reenders

2 6

Latest subscription version and Map issues
by Chris Pelling 17 Oct '13

17 Oct '13

Evening all :-) I have had a quick look at the google page listed in the the doc, and also had a good search of google in general. I have a smallish but problematic issue with the overview page. In the old version (before update) I did not have any issue with this, howver the page defaults to the USA, and well I am in the UK - I have tried playing around with the region setting in the Docs (not a lot is discussed about "what" it actually does, but i have had a good play) to no avail. Google api doc page mentioned setting the region to "England" so I set : [map] => Array ( [region] => England [resolution] => countries [dotsize] => 10 [realworld] => [api] => google-mc [zooms_per_click] => 1 But it still defaults to the USA (middle of) :/ Now the second issue is we have set the device properties > System Location to be "Greenwich View Place, London, UK" which initially showed the devices in the correct place, then after an hour or two, its now 3 miles off to the East :( (and there I was thinking - wow thats good) :) So any help - guidance would be much appreciated :) -- Kind regards, Chris

4 5

Junos health monitoring removed?
by Rutger Bevaart 16 Oct '13

16 Oct '13

Hi, Just a quick question. For some reason my temperature sensors disappeared on Juniper / Junos gear. Observium log shows many of these: Sensor Deleted: temperature junos 9.1.0.0 Routing Engine 0 Running latest version from pro/svn, just updated to 4670 to be sure. Any clues? Regards, Rutger

2 3

Searching in the FDB-Tables
by Wiethoff, Helge 16 Oct '13

16 Oct '13

Hi all :-) When i search for a specific mac-address inside the FDB-Table i get no results with the default search options. Only if i deactivate the Options for Vlan and VLAN names. You can see in the screenshot: https://www.dropbox.com/s/0t18gycxw28ex56/fdb-table.png (equivalent for VLAN names... There is a blank entry selected https://www.dropbox.com/s/nx0dwkldj1vch7c/fdb-tables2.png ). Now my question: Is this the intended behavior? :) How are those default options set? Best regards, Helge ________________________________ Helge Wiethoff Medienzentrum Telefon: +49 (234) 968 8717 Fax: +49 (234) 968 3453 E-Mail: Wiethoff(a)tfh-bochum.de Technische Fachhochschule Georg Agricola für Rohstoff, Energie und Umwelt zu Bochum Staatlich anerkannte Fachhochschule der DMT-Gesellschaft für Lehre und Bildung mbH Herner Straße 45 44787 Bochum http://www.tfh-bochum.de ________________________________ Träger: DMT-Gesellschaft für Lehre und Bildung mbH Sitz der Gesellschaft: Bochum Registergericht: Amtsgericht Bochum Handelsregister: B 4052 Geschäftsführung: Prof. Dr. Jürgen Kretschmann (Vorsitzender) Manfred Freitag

2 2

Re: [Observium] Storage alerts
by BERTRAND Adrien [BPCE Assurances] 16 Oct '13

16 Oct '13

Maybe it's active in the pro version ? Adrien De : BERTRAND Adrien [BPCE Assurances] Envoyé : mardi 15 octobre 2013 10:55 À : 'observium(a)observium.org' Objet : Storage alerts Hi everyone, I'm using the old alerting system for hosts down and it works fine :-) But now I want to use the old or new one to know when my servers have data storage > 90% of their capacity. Is it possible ? And I'm always with the last SVN free version (I'm waiting for my Chief to buy the subscription). Thanks a lot, Adrien

1 0

User Levels
by Jeremy Custenborder 15 Oct '13

15 Oct '13

Excuse me if this is already documented some place. What is the lowest user level that will have read access to everything? Are the levels documented anywhere?

1 0

inventory api not work
by Keyman 15 Oct '13

15 Oct '13

hi, all i enable API like this: // Simple Observium API Settings $config['api']['enabled'] = 1; $config['api']['module']['inventory'] = 1; and then i use http://x.x.x.x/api.php?username=admin&password=admin&module=inventory&devic… to export data, but retured : {"login":{"success":{"code":"101","msg":"User authentification succeeded"}},"data":[]} the device id is right, i can find inventory data from url http://x.x.x.x/device/device=4/tab=entphysical/ what's wrong about this ? thanks for your answer. yuan

1 0

Storage alerts
by BERTRAND Adrien [BPCE Assurances] 15 Oct '13

15 Oct '13

Hi everyone, I'm using the old alerting system for hosts down and it works fine :-) But now I want to use the old or new one to know when my servers have data storage > 90% of their capacity. Is it possible ? And I'm always with the last SVN free version (I'm waiting for my Chief to buy the subscription). Thanks a lot, Adrien

1 0

Geolocation through proxy
by Christian Hügel 15 Oct '13

15 Oct '13

Hi, is there a way to use the geolocation feature through a proxy with authentication? Our network policy doesn´t admint anonymous access through the proxy. Thx. Chris

2 2

Empty ADSL and SLA rrd
by David George 14 Oct '13

14 Oct '13

Morning all, I've just started trailing observium, and it's looking like a great system. Router health and interface counters seems to be logged and graphed correctly, so it's starting to look like a viable alternative to some of the larger closed source systems. I especially like the simplicity of the design which should allow for some additional sensor development down the that I'll submit back. So kudos on the system, I quite like it. Now - onto the issue, and I'm assuming given the size of the user-base this is likely to be configuration, but I've read and re-read the related doco and I'm unable to find anything wrong. I've added a Cisco 877 device, port counters and health are being logged and graphed correctly, but the ip-sla statistics and adsl line statistics are not. The header line includes dsl stats, and those stats appear to update according to the polling schedule, but the graphs do not. Also, the file timestamp is NOT updating on the adsl RRD file. it is however updating on the sla rrd file. rrdtool dump reveals that the rrd file contains no rows that have a value. config file contains $config['enable_ports_adsl'] = 1; # Enable ADSL-LINE-MIB $config['enable_sla'] = 1; Observium CE 0.13.10.4585 Apache 2.2.22 (Ubuntu) PHP 5.3.10-1ubuntu3.8 MySQL 5.5.29-0ubuntu0.12.04.1 RRDtool 1.4.7 [cid:image001.png@01CEC983.247047C0] [cid:image002.png@01CEC983.247047C0]

1 0

Did the config setting mibdir get removed?
by Jeremy Custenborder 14 Oct '13

14 Oct '13

Guys, We used mibdir heavily in our environment. After updating I see everything is going back to the default /opt/observium/mibs. What can we do to correct this? Has the setting changed? J

2 3

Error during polling: ERROR: unknown option 's'
by Jeremy Custenborder 14 Oct '13

14 Oct '13

Have any of you run into this before? I'm running centos 6.4. ERROR: unknown option 's' ERROR: unknown option 's' ERROR: unknown option 's' Module [ unix-agent ] disabled globally. Using SNMP Agent sysUpTime (4488767 seconds) ERROR: unknown option 's' Uptime: 51 days, 22h 52m 47s Module time: 5.0179s Hardware: cisco2811 Version: 15.1(4)M6 Features: ADVSECURITYK9 Serial: Asset: Module time: 1.0249sIPMI: Module time: 0.0087sSensors: Checking (snmp) temperature chassis ERROR: unknown option 's' 26 C Checking alerts Module time: 1.0116sProcessor Processor 1 ERROR: unknown option 's' 1% Checking alerts Module time: 1.025sMempool Processor: 25.95% ERROR: unknown option 's' Checking alerts Mempool I/O: 60.08% ERROR: unknown option 's' Checking alerts Mempool 2811 chassis - Processor: 25.95% ERROR: unknown option 's' Checking alerts Mempool 2811 chassis - I/O: 60.08% ERROR: unknown option 's' Checking alerts Module time: 8.8415sModule time: 0.0025sPolling Netstats: IPERROR: unknown option 's' TCPERROR: unknown option 's' UDPERROR: unknown option 's' ICMPERROR: unknown option 's' SNMPERROR: unknown option 's'

2 2

CE: Broken detailed Collectd charts
by Frank Ortmann 14 Oct '13

14 Oct '13

Hi I installed the community edition at the time of the split and have come across an issue with the detailed charts. When I click on the Collectd tab I see the various charts as expected. See the attached screenshot. However, when I then click on one of the charts to see more detail, I get the broken image icon. I would expect to see something like the following: I am doing something wrong, or is this a bug? Thanks, Frank

1 0

Test of List Posting
by Ron Wingfield 14 Oct '13

14 Oct '13

4 4

poller performance
by F.Reenders＠utwente.nl 14 Oct '13

14 Oct '13

Hi, I'm having problems with the performance of the poller. We have 200 switches and almost 16000 ports included and the poller is having trouble getting them checked in 5 minutes. With 20 threads it's working with a load of 15. When I add more threads it takes longer to get the data from switches. With less threads it also doesn't check all switches in 5 minutes. I'm using new fast hardware. I've implemented all the performance tuning tips on the observium site. I also disabled the checking of fbd-table, arp-table and mac-accounting. When I debug the poller the ports check takes the longest. About 90 % of the total time. 1 switch takes about 8 to 10 seconds now. Is there a way to speed it up? Maybe I can extend the check cycle time to 10 minutes? Distributed poller instances? Regards, Frederik Reenders | ICTS Operation Centre | University of Twente | ICT Service Centre | ICTS Server Operation | P.O.Box 217, 7500 AE Enschede The Netherlands | Drienerlolaan 5, 7522 NB Enschede | Campus building: Spiegel, room 416 | T: +31 53 489 2653/6723 | f.reenders(a)utwente.nl | www.utwente.nl/icts/en/

8 25

Brocade FastIron SX 1600, IronWare Version 07.0.01cT3e1
by Danilo Marques de Gouveia 13 Oct '13

13 Oct '13

Hello guys, I'm testing Observium in the company that I work, it's working great, however we realize that Observium is not getting the processors and memory utilization from ours FastIron SX family, which includes SX 800 and SX 1600. The Brocade MLX family that we use are working fine and we are able to get proc and memory, I guess that it's a MIB problem but I couldn't find it on google. Does anyone has this switches been monitored by observium? Below is the version info from observium: *Observium CE*0.13.10.4585 *Apache*2.2.16 (Debian) *PHP*5.3.3-7+squeeze17 * MySQL*5.1.66-0+squeeze1 *RRDtool*1.4.3 Thanks in advance, -- Danilo Marques de Gouveia

4 6

monitoring SFP interfaces on Juniper EX3300
by Rodrigo Augusto 12 Oct '13

12 Oct '13

Hi folks! Does anyone have any idea what I have to do to monitoring my 10GB interfaces on juniper ex3300?! On my MX observium monitoring normally ut on my ex3300 cant see DBM page. What I have to do to solve this?! Rodrigo Augusto Gestor de T.I. Grupo Connectoway http://www.connectoway.com.br <http://www.connectoway.com.br/> http://www.1telecom.com.br <http://www.1telecom.com.br/> * rodrigo(a)connectoway.com.br <mailto:rodrigo@connectoway.com.br> ( (81) 3366-7376 ( (81) 8184-3646 ( INOC-DBA 52965*100

1 0

Re: [Observium] [Observium-dev] r4545 - in observer/branches/devel/html/pages/device: . overview
by Paul Gear 12 Oct '13

12 Oct '13

On 10/10/2013 06:29 AM, Adam Armstrong wrote: > On 2013-09-28 03:12, Paul Gear wrote: >> On 09/26/2013 03:25 PM, observium-commits(a)observium.org wrote: >> Author: adama >> Date: 2013-09-26 07:25:19 +0200 (Thu, 26 Sep 2013) >> New Revision: 4545 >> >> Added: >> observer/branches/devel/html/pages/device/overview/processors-unix.inc.php >> >> Modified: >> observer/branches/devel/html/pages/device/overview.inc.php >> Log: >> more useful processor overview for unix hosts >> >> IMO, ucd_cpu (a.k.a. detailed processor) would be a better processor >> overview for Unix hosts; at least it includes a breakdown of the >> usage. Even better would be finding one that includes iowait time >> (I'm not sure if net-snmp exposes this). > > We don't read observium-dev, it's just svn spam. you need to > cross-post these to observium :> > > We could probably pull io-wait from the agent. P.S. It also should be called utilisation, not load. Load & utilisation are two separate figures and mixing their names is confusing. Paul

1 0

Devices not visible from drop down for user level less than 5
by Andrej K 12 Oct '13

12 Oct '13

Hi to all of you, I have found following problem,Normal user can`t see devices on map, also devices are not shown from upper drop down menu. Same with ports. Any ideas ? Thank you all. I use R4586 Andrej Kolakovic

1 0

Moving to the Subscription Edition on CentOS
by Stefano Cordio 12 Oct '13

12 Oct '13

Hello guys, I'd like to inform you that on my CentOS 6.4 I followed the steps for moving the installation (http://www.observium.org/wiki/Edition_Split#How_do_I_move_to_the_Subscripti on_Edition.3F), but I also had to move the logs folder: mv observium-old/logs observium otherwise the Apache startup gave that error on /var/log/httpd/error_log: (2)No such file or directory: httpd: could not open error log file /opt/observium/logs/error_log. Unable to open logs Kind Regards, Stefano

1 0

Power meter error graphs
by Ryan Milton 12 Oct '13

12 Oct '13

I have a number of power meters from tripplite and obviously they don't have network statistics for traffic. So, I get the attached errors for the ports graphs on the overview page and when I click on the ports, where it takes you to the graphs of all the traffic. I want to be able to disable the display of this, since everything else is correct. Is there an element in code somewhere that I can just comment that out or something? Regards, Ryan Milton MVS Network Manager o: 201-447-1505 x124 c: 862-249-5230 www.mvsusa.com<http://www.mvsusa.com/> [MVS final logo GOOD very small]

3 9

Wrong data in CPU Load graph
by Christian Hügel 11 Oct '13

11 Oct '13

Hi, the graphs for the CPU load of a linux server are not accurate. The CPU shows in vSphere client a load of 40-50% but in observium all 4 cores are permanently at 90%. Does anybody know why this happens? Thx Chris

4 10

URL Tracking
by Ryan Milton 11 Oct '13

11 Oct '13

I have been enjoying my Observium installation quite a lot, and I love the nice graphs of traffic and ports. Given that this level of detail can be pulled from the devices, is there anyone/anyway who have been able to use that info to create a URL tracker that could show to what URL's a source IP is going? I'd love to be able to integrate something like that into Observium. Regards, Ryan Milton MVS Network Manager o: 201-447-1505 x124 c: 862-249-5230 www.mvsusa.com<http://www.mvsusa.com/> [MVS final logo GOOD very small]

3 2

Ping Timeouts
by James Bensley 11 Oct '13

11 Oct '13

Howdy all, I'm getting lots of emails for a few devices that have basic ADSL connectivity. Pings from the Observium box have a high RTT and timeout (I guess). Said emails have the following subject; Device Down: device.network.net (ping) Device Up: device.network.net I am getting these emails 5 minutes apart. Each time the poller runs the host is either back up again or going down again. This is happening for a few devices with congested ADSL connections (which is a separate issue in itself!). I have tried to raise the the timeout options in the config, thus; $config['ping']['timeout'] = 3000; # timeout in ms $config['ping']['retries'] = 6; # how many times to retry the query When I am on the server pinging the devices that cause these alerts, the ping is never higher than 1500ms. Perhaps when the poller runs the delay is higher (although I haven't seen this behavious when running pings for 30+ mins). I did raise it to 6000ms but this didn't stop the alerts either. It seems to me that Observium isn't honoring those values. Has anyone had any problems with these settings before? The default timeout is 500ms which I wanted to raise anyway, but I'm not sure this is having any effect. Cheers, James.

3 3

Re: [Observium] Subs Activation?
by Adam Armstrong 11 Oct '13

11 Oct '13

There is a set of commands on the edition_split page linked from the blue message and from the main web site. You just move the old version, checkout the new one and move over your rrds and config.php. Adam. Terry Sweetser <terry+observium(a)skymesh.net.au> wrote: >How does one activate a subscription and remove the friendly blue >message from the SVN build? > >-- >http://about.me/terry.sweetser > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

inventory api not work
by Keyman 11 Oct '13

11 Oct '13

hi, all i enable API like this: // Simple Observium API Settings $config['api']['enabled'] = 1; $config['api']['module']['inventory'] = 1; and then i use http://x.x.x.x/api.php?username=admin&password=admin&module=inventory&devic… to export data, but retured : {"login":{"success":{"code":"101","msg":"User authentification succeeded"}},"data":[]} the device id is right, i can find inventory data from url http://x.x.x.x/device/device=4/tab=entphysical/ what's wrong about this ? thanks for your answer. yuan

1 0

Re: [Observium] Wrong data in CPU Load graph
by Tom Laermans 11 Oct '13

11 Oct '13

Hi, Have you asked vmware too? Have you checked in the monitored machines what their usage is? Either way we report what the device's snmp stack reports. Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Christian Hügel" <christian.huegel(a)stonebyte.de> To: <observium(a)observium.org> Subject: [Observium] Wrong data in CPU Load graph Date: Fri, Oct 11, 2013 09:01 Hi, the graphs for the CPU load of a linux server are not accurate. The CPU shows in vSphere client a load of 40-50% but in observium all 4 cores are permanently at 90%. Does anybody know why this happens? Thx Chris _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Subs Activation?
by Tom Laermans 11 Oct '13

11 Oct '13

Hi. If you read the friendly blue message carefully, you'll find all you need to know. Should you choose not to, surely the project webpage will tell you the same... Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Terry Sweetser" <terry+observium(a)skymesh.net.au> To: "Observium Network Observation System" <observium(a)observium.org> Subject: [Observium] Subs Activation? Date: Fri, Oct 11, 2013 07:50 How does one activate a subscription and remove the friendly blue message from the SVN build? -- http://about.me/terry.sweetser _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Observium Installation Startup and Configuration -- Perhaps $PATH Problems?
by Tom Laermans 11 Oct '13

11 Oct '13

You're confusing a filesystem subdirectory with an http subdirectory, everything after that is moot. Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Ron Wingfield" <Ron.Wingfield(a)Archaxis.net> To: "Observium Network Observation System" <observium(a)observium.org> Subject: [Observium] Observium Installation Startup and Configuration -- Perhaps $PATH Problems? Date: Fri, Oct 11, 2013 05:32 Good evening Adam and all: Yes, I'm aware of the subdirectory caveat and I've installed in /opt/observium as advertised (/opt is in the root directory). I have been able to login, once I found that the password is MD5 encrypted and I changed the value in the users table element, password. (Have to use phpMyAdmin.) Regardless, my questions are with regard to the value for the base_url and the various *_dir values. See the following: Default directories (as per ./observium/config.php) // Location $config['install_dir'] = "/opt/observium/"; // moot considering the following: Default directories (as per ./observium/includes/default.inc.php) $config['install_dir'] = "/opt/observium"; #$config['html_dir'] = $config['install_dir'] . "/html"; #$config['rrd_dir'] = $config['install_dir'] . "/rrd"; #$config['log_file'] = $config['install_dir'] . "/observium.log"; #$config['temp_dir'] = "/tmp"; Un-commenting the (previous) last four instructions seems to make no difference . . .? // This should *only* be set if you want to *force* a particular hostname/port // It will prevent the web interface being usable form any other hostname // $config['base_url'] = "http://observium.company.com"; $config['base_url'] = ""; // Without this set to something (including a NULL value), // the index.php page will not render properly. (Noted by RTW) If the logout option is selected per the following associated code, <li><a href="logout/" title="Logout"><i class="oicon-door-open-out"></i> Logout</a></li> The system complains that: “The requested URL /index.php/logout// was not found on this server.” This seems logical because the href=”logout/” construct is apparently poorly formed. It suggests that there is a relative directory named logout, and nothing is specified as an object. Perhaps there is some concatenation problem. The same is true for other menu options, e.g.: <a href="logout/ . . .etc <a href="settings/ . . .etc <a href="preferences/ . . .etc <a href="about/ . . .etc . . .all fail. I suspect some path issues. Can someone tell me where/what object (PHP script?) executes the logout procedure? In other words, where is the <li><a href="logout/" title="Logout"><i class="oicon-door-open-out"></i> Logout</a></li> list element construct created? Finally, in order to get the "home page" (the one with the world map) to render following successful login, the following was necessary: RE: /opt/observium/html/pages/logon.inc.php Changed url to relative reference (removed “/” before “image”) to enable display of image:  <div class="well" style="padding: 50px; background-image: url('images/login-hamster-large.png'); background-position: ...etc. BTW, think of me as someone in "userland" that is PHP capable. Thanks for any suggestions; in the mean time, I'll revisit my Apache2.2 httpd configurations for possible path problems. I think that with a little "jump start" help, I can port this to FreeBSD. OTTF, Ron W. Adam Armstrong wrote: Observium doesn't work from a subdirectory. Also, FreeBSD is not really supported, as non[e] of the development team use it, and Observium relies a little more heavily on userland than most PHP applications. adam.

1 0

Subs Activation?
by Terry Sweetser 11 Oct '13

11 Oct '13

How does one activate a subscription and remove the friendly blue message from the SVN build? -- http://about.me/terry.sweetser

1 0

MIB requests
by Robbie Wright 10 Oct '13

10 Oct '13

Just throwing an idea out there, but for devices that are not currently supported, but have published MIB's, could we put some type of voting system out there, ala http://ideascale.com or something similar? Help guide Adam and Tom a bit in the development so they know where the interest is and possibly get some donations for the popular ideas/devices? Robbie Wright Siuslaw Broadband <http://siuslawbroadband.com> 541-902-5101 **For support issues, please email support(a)siuslawbroadband.com.**

3 4

Multiple year subscription
by Jeremy Custenborder 10 Oct '13

10 Oct '13

Hey All, Is there an easy way for me to pay upfront for a multiple year subscription? I have a client that would like to have a multiple year subscription but it's a bit of a pain for them to use PayPal. I would like to pay for 5 or so years ahead of time? J

2 2

Perf_time tables
by Jeremy Custenborder 10 Oct '13

10 Oct '13

Are the perf_times and devices_perftimes used for anything other than diagnostics at the moment? These tables are the significant majority of the data in our database. I truncated them once to free up some space. Is this something that I could do on a regular basis? perf_times => 2013-09-20 04:00:02 to 2013-10-10 17:23:21 generated 25,476,751 rows devices_perftimes => 2013-09-20 20:45:02 to 2013-10-10 17:40:21 generated 24,536,885 rows

2 1

Routing - CEF - Eastergg?
by Christian Hügel 10 Oct '13

10 Oct '13

Hi, whats the joke with "pot smoking" image in CEF? :) :) Check attachement. Chris

2 1

Mailing alert for hosts down
by BERTRAND Adrien [BPCE Assurances] 10 Oct '13

10 Oct '13

Good afternoon everyone, I'm a security administrator from a French insurance company and me and my collegues are interested in your powerful monitoring tool. I've tested it recently and was amazed by the pretty easy installation of such an intuitive software :-) I've also discovered your splitting editions and your intentions for the future and agree with that. The pricing is correct in front of all the work you (all the devs) have done. The only things I would to know to convince my chief that it's the tool we need, is : do you have a roadmap for the alerting module ? Because, if I've correctly understood, you have done a successful Kickstarter campaign to implement the alerting module, but from my last tests (one of the last free SVN edition, something like r4400) the alerting module wasn't really enabled, even after changing the config.php and setting the mailing alerts (with the right SMTP relay, recipient, etc...). Another question is, when (or how if I've done it wrong ...) do you plan to enable mail alerts for hosts down ? I didn't search in all your archives (only the last months) but I'm sorry if the questions was already asked ... and I'm sorry for my rough English ... Thank you in advance for your answer(s), Adrien Bertrand Information security administrator BPCE Assurances

7 15

Re: [Observium] Custom device types
by Adam Armstrong 10 Oct '13

10 Oct '13

You probably don't want to change any of that... What are you trying to accomplish? Adam. Robbie Wright <robbie(a)siuslawbroadband.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 6

Client \ Server Observium
by Randy Coburn 09 Oct '13

09 Oct '13

Hi All, I was wondering if there was a way to get a copy of Observium to be a collector and then somehow send that data to a display server. Our issue is that we would like to collect the stats as close to the devices as possible and then transport them over to the central server where we can view them all. If this is as easy as doing some mysql scripting then we should be ok to get it done. However a push in the right direction would be welcome. NewVoiceMedia are proud gold sponsors of Dreamforce. Use our promo code EC13NEWVO to register and save $100: [Dreamforce | Join The Customer Company Revolution | Nov 18-21, 2013 | San Francisco]<http://www.salesforce.com/dreamforce/> www.newvoicemedia.com<http://www.newvoicemedia.com> Click here<http://www.newvoicemedia.com/customers/> to see what our customers think Click here<http://sites.force.com/appexchange/listingDetail?listingId=a0N300000025yAGE…> to see our integration with salesforce.com Follow NewVoiceMedia on Facebook<http://www.facebook.com/pages/NewVoiceMedia/137330659646514?v=wall>, Flickr<http://www.flickr.com/photos/newvoicemedia/>, LinkedIn<http://www.linkedin.com/company/newvoicemedia>, Twitter<https://twitter.com/NewVoiceMedia> Registered Office: NewVoiceMedia Ltd, Belvedere, Basing View, Basingstoke, Hampshire. RG21 4HG. NewVoiceMedia Registered in England No: 3602868 This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of NewVoiceMedia. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error.

2 1

Observium Community / Professional
by Adam Armstrong 09 Oct '13

09 Oct '13

Hi Guys, As we talked about in April, to sustain development we need to develop a revenue stream. The temporary solution in April was the Kickstarter, which funded 6 months of development for the alerting system. To fund development after that, we've decided to try a relatively inexpensive subscription scheme. http://www.observium.org/Edition_Split The intention is to provide enough for free to keep the people who wouldn't ever pay happy, and try to keep the price low enough that everyone else can pay without worrying too much about it. We've set the subscription at £100/year. If you were a Kickstarter supporter, you'll get a free subscription for a while, because we're nice like that. Comments? :) adam.

11 15

poller-wrapper.py error
by Christian Hügel 09 Oct '13

09 Oct '13

Hi, just installed observium on a new host. Everything seems to be fine except that no RRD graphs are shown. I tried to run the poller-wrapper from the CLI and I get this error: /opt/observium/poller-wrapper.py File "/opt/observium/poller-wrapper.py", line 96 with open(config_file) as f: pass ^ SyntaxError: invalid syntax Any hints? Thanks Chris ------------------- OpenPGP: 0x1F814CFD Threema: ZKZ2WZR7

4 6

Memory Usage: what is there displayed?
by Wiethoff, Helge 09 Oct '13

09 Oct '13

Hi all, i have a little problem with the Memory-Usage-Graph. I hope it wasn't discussed already: What is displayed there? :-) It says: "Used: -2.0GB" As you can see in the attached memory_usage.png X-AS01:/etc/pam.d # free -h total used free shared buffers cached Mem: 4,9G 4,6G 292M 0B 68M 4,1G -/+ buffers/cache: 399M 4,5G Swap: 743M 115M 628M I guess observium is a bit confused because i have a ramdisk? tmpfs on /mnt/ramdisk type tmpfs (rw,relatime,size=4194304k) Is this a observium-Problem or is it a misconfigured by myself? Thanks and regards, Helge ________________________________ Helge Wiethoff Medienzentrum Telefon: +49 (234) 968 8717 Fax: +49 (234) 968 3453 E-Mail: Wiethoff(a)tfh-bochum.de Technische Fachhochschule Georg Agricola für Rohstoff, Energie und Umwelt zu Bochum Staatlich anerkannte Fachhochschule der DMT-Gesellschaft für Lehre und Bildung mbH Herner Straße 45 44787 Bochum http://www.tfh-bochum.de ________________________________ Träger: DMT-Gesellschaft für Lehre und Bildung mbH Sitz der Gesellschaft: Bochum Registergericht: Amtsgericht Bochum Handelsregister: B 4052 Geschäftsführung: Prof. Dr. Jürgen Kretschmann (Vorsitzender) Manfred Freitag

3 3

Port groups under device
by Christian Hügel 09 Oct '13

09 Oct '13

Hi, i wonder if its possible to group port types (eg. all 10GigE) of a specific device. We have some core switches that have lots of modules with a huge amount of ports. If I click to see the graphs of that device it takes way to long while it loads all of the ports of that device. Like: switch1 ------> Module 1 ------> Module 2 ------> PortChannels ------> TenGig ------> VLANs switch2 etc. It would be much faster/easier to go directly to the desired module/port group. Thanks Chris.

4 6

Monitoring an NFS share?
by kevin＠techdaddies.com 09 Oct '13

09 Oct '13

We have our backup storage mounted as an NFS share on our devices. We want to monitor each of these shares individually from the servers themselves (Not from the backup server, as that machine is not under our control). I am loving Observium so far but cannot figure out how we can accomplish this task. Disk monitoring is already in place so this doesn't seem like too much of a reach as the mounted share shows up in df -h output. Any tips would be appreciated.

2 1

Custom device types
by Robbie Wright 07 Oct '13

07 Oct '13

Has anyone done anything to customize the device types? I poked around in the config file and it does look like each type has its own array of variables that go with it. Robbie Wright Siuslaw Broadband <http://siuslawbroadband.com> 541-902-5101 **For support issues, please email support(a)siuslawbroadband.com.**

1 0

Re: [Observium] arp ip dnsname
by Rob VanHooren 07 Oct '13

07 Oct '13

+1 hack in all of switchmap.pl so I can take it out of cron :-) --- am just curious, is it possible to get the ARP / NDP Table to show the IP addresses associated with the ports instead of just the VLAN ID? Is this possible to configure, or just not with what info the Cisco switches are providing? Sorry if this is explained somewhere, just didn't seem to find anything related to this.

1 0

ARP/NDP Table Question
by Andrew Hunstiger 07 Oct '13

07 Oct '13

I am just curious, is it possible to get the ARP / NDP Table to show the IP addresses associated with the ports instead of just the VLAN ID? Is this possible to configure, or just not with what info the Cisco switches are providing? Sorry if this is explained somewhere, just didn't seem to find anything related to this. Example: [cid:image001.png@01CEC365.1F2191D0] Thanks, --Andrew --------------------------------------------------- Confidentiality Notice: This electronic mail transmission is confidential, may be privileged and should be read or retained only by the intended recipient. If you have received this transmission in error, please immediately notify the sender and delete it from your system.

2 1

Storage and Temperatures/Voltages/Fans gone missing
by Niklas Larsson 07 Oct '13

07 Oct '13

Hi, after som updates (now on the latest public SVN) I have lost temperatures on my SuperMicro boxes. And on some the storage as well. Log from ./discovery.php -d -h box01.example.com: https://gist.github.com/pnlarsson/2d207c05a47cc4de1361 Temperatures/Voltages/Fans: They all went to 0 around 2013-07-10 (Voltage -12V above threshold: 0 V (> -10.729 V)). And deleted 2013-08-25 (Sensor Deleted: voltage supermicro 9 CPU1 Vcore). I can get the temperatures/voltage/fans from cli with sd2 and from smtp with: [root@observium observium]# snmpwalk -v2c -c 'SuperDuperPassword' box01.example.com .1.3.6.1.4.1.10876 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.1 = STRING: "Fan1 Fan Speed" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.2 = STRING: "Fan2 Fan Speed" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.3 = STRING: "Fan3 Fan Speed" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.4 = STRING: "Fan4 Fan Speed" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.5 = STRING: "Fan5 Fan Speed" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.6 = STRING: "Fan6 Fan Speed" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.7 = STRING: "Fan7 Fan Speed" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.8 = STRING: "Fan8 Fan Speed" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.9 = STRING: "CPU1 Vcore Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.10 = STRING: "CPU2 Vcore Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.11 = STRING: "CPU1 DIMM Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.12 = STRING: "CPU2 DIMM Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.13 = STRING: "+5V Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.14 = STRING: "+5VSB Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.15 = STRING: "+12V Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.16 = STRING: "-12V Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.17 = STRING: "+3.3V Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.18 = STRING: "+3.3Vsb Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.19 = STRING: "VBAT Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.20 = STRING: "CPU1 Temperature" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.21 = STRING: "CPU2 Temperature" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.22 = STRING: "System Temperature" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.23 = STRING: "Chassis Intrusion" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.24 = STRING: "Power Supply Failure" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.25 = STRING: "DIMM Temperature" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.1 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.2 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.3 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.4 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.5 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.6 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.7 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.8 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.9 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.10 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.11 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.12 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.13 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.14 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.15 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.16 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.17 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.18 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.19 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.20 = INTEGER: 2 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.21 = INTEGER: 2 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.22 = INTEGER: 2 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.23 = INTEGER: 3 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.24 = INTEGER: 3 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.25 = INTEGER: 3 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.1 = INTEGER: 8437 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.2 = INTEGER: 8437 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.3 = INTEGER: 8437 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.4 = INTEGER: 8437 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.5 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.6 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.7 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.8 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.9 = INTEGER: 1072 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.10 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.11 = INTEGER: 1368 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.12 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.13 = INTEGER: 5120 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.14 = INTEGER: 5120 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.15 = INTEGER: 12286 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.16 = INTEGER: -11891 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.17 = INTEGER: 3264 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.18 = INTEGER: 3288 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.19 = INTEGER: 3216 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.20 = INTEGER: 27 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.21 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.22 = INTEGER: 19 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.23 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.24 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.4.25 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.5.9 = INTEGER: 1488 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.5.10 = INTEGER: 1488 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.5.11 = INTEGER: 1648 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.5.12 = INTEGER: 1648 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.5.13 = INTEGER: 5504 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.5.14 = INTEGER: 5504 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.5.15 = INTEGER: 13187 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.5.16 = INTEGER: -10729 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.5.17 = INTEGER: 3648 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.5.18 = INTEGER: 3648 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.5.19 = INTEGER: 3648 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.5.20 = INTEGER: 95 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.5.21 = INTEGER: 95 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.5.22 = INTEGER: 75 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.6.1 = INTEGER: 715 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.6.2 = INTEGER: 715 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.6.3 = INTEGER: 715 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.6.4 = INTEGER: 715 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.6.5 = INTEGER: 715 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.6.6 = INTEGER: 715 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.6.7 = INTEGER: 715 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.6.8 = INTEGER: 715 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.6.9 = INTEGER: 600 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.6.10 = INTEGER: 600 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.6.11 = INTEGER: 1352 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.6.12 = INTEGER: 1352 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.6.13 = INTEGER: 4512 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.6.14 = INTEGER: 4512 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.6.15 = INTEGER: 10803 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.6.16 = INTEGER: -13246 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.6.17 = INTEGER: 2952 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.6.18 = INTEGER: 2952 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.6.19 = INTEGER: 2952 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.1 = INTEGER: 84375 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.2 = INTEGER: 84375 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.3 = INTEGER: 84375 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.4 = INTEGER: 84375 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.5 = INTEGER: 84375 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.6 = INTEGER: 84375 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.7 = INTEGER: 84375 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.8 = INTEGER: 84375 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.9 = INTEGER: 2040 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.10 = INTEGER: 2040 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.11 = INTEGER: 2040 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.12 = INTEGER: 2040 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.13 = INTEGER: 8160 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.14 = INTEGER: 8160 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.15 = INTEGER: 13504 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.16 = INTEGER: 1854 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.17 = INTEGER: 6120 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.18 = INTEGER: 6120 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.19 = INTEGER: 6120 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.20 = INTEGER: 127 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.21 = INTEGER: 127 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.22 = INTEGER: 127 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.23 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.24 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.7.25 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.1 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.2 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.3 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.4 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.5 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.6 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.7 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.8 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.9 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.10 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.11 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.12 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.13 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.14 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.15 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.16 = INTEGER: -47513 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.17 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.18 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.19 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.20 = INTEGER: 4294967169 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.21 = INTEGER: 4294967169 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.22 = INTEGER: 4294967169 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.23 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.24 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.8.25 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.9.1 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.9.2 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.9.3 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.9.4 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.9.5 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.9.6 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.9.7 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.9.8 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.1 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.2 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.3 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.4 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.5 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.6 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.7 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.8 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.9 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.10 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.11 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.12 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.13 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.14 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.15 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.16 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.17 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.18 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.19 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.20 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.21 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.22 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.23 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.24 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.10.25 = INTEGER: 1 but if fails after a while with snmpbulkwalk: [root@observium observium]# snmpbulkwalk -v2c -c 'SuperDuperPassword' box01.example.com .1.3.6.1.4.1.10876 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.1 = STRING: "Fan1 Fan Speed" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.2 = STRING: "Fan2 Fan Speed" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.3 = STRING: "Fan3 Fan Speed" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.4 = STRING: "Fan4 Fan Speed" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.5 = STRING: "Fan5 Fan Speed" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.6 = STRING: "Fan6 Fan Speed" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.7 = STRING: "Fan7 Fan Speed" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.8 = STRING: "Fan8 Fan Speed" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.9 = STRING: "CPU1 Vcore Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.10 = STRING: "CPU2 Vcore Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.11 = STRING: "CPU1 DIMM Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.12 = STRING: "CPU2 DIMM Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.13 = STRING: "+5V Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.14 = STRING: "+5VSB Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.15 = STRING: "+12V Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.16 = STRING: "-12V Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.17 = STRING: "+3.3V Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.18 = STRING: "+3.3Vsb Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.19 = STRING: "VBAT Voltage" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.20 = STRING: "CPU1 Temperature" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.21 = STRING: "CPU2 Temperature" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.22 = STRING: "System Temperature" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.23 = STRING: "Chassis Intrusion" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.24 = STRING: "Power Supply Failure" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.2.25 = STRING: "DIMM Temperature" SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.1 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.2 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.3 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.4 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.5 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.6 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.7 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.8 = INTEGER: 0 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.9 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.10 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.11 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.12 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.13 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.14 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.15 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.16 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.17 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.18 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.19 = INTEGER: 1 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.20 = INTEGER: 2 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.21 = INTEGER: 2 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.22 = INTEGER: 2 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.23 = INTEGER: 3 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.24 = INTEGER: 3 SNMPv2-SMI::enterprises.10876.2.1.1.1.1.3.25 = INTEGER: 3 Timeout: No Response from box01.example.com Storage: SNMP is returning storage and I'm using the linux/unix agent as well and it's echoing: <<<df>>> /dev/md0 ext4 468688256 3227188 441653076 1% / <<<mounts>>> /dev/md0 / ext4 rw,relatime,barrier=1,data=ordered 0 0 but the graphs are not there any more. Can't find anything in the event logs either concerning storage. /niklas

4 6

Ramsay in da haus!
by Rob VanHooren 07 Oct '13

07 Oct '13

aye, the Gordon Ramsay of network monitoring. :-D (f**king donkey… ) On 2013-10-07, at 7:00 AM, observium-request(a)observium.org wrote: > But hey, if this is the bullshit we get for continuing to release an > Open Source version, maybe we'll stop doing that...

1 0

login page: mention observium or not?
by Adam Armstrong 06 Oct '13

06 Oct '13

Hi Guys, Straw poll: Should we mention Observium on the login page or not? I've historically avoided it because dumb security auditors are easily placated by security through obscurity. adam.

2 1

Re: [Observium] Observium Community / Professional
by Adam Armstrong 06 Oct '13

06 Oct '13

Win... Rar... I don't even. Leslie-Alexandre DENIS <infoslad(a)gmail.com> wrote: >As for me the tar.gz provided at >http://www.observium.org/observium-community-latest.tar.gz is corrupted >(opened with WinRAR). Don't think it's on me, just saying. > >Regards >Le 06/10/2013 17:55, Adam Armstrong a écrit : >> They were already on the Ubuntu/Debian guide, I've added them to the >> RHEL/Centos/etc guide. >> >> I think there is some scope for merging the guides, actually... >> >> adam. >> >> >> On 2013-10-06 16:39, Jared Beaulieu wrote: >>> Does the install page need to be updated with a link to the tar file >>> for the Open Source edition? >>> >>> - Jared >>> >>> ------------------------- >>> FROM: Adam Armstrong <adama(a)memetic.org> >>> TO: observium(a)observium.org >>> SENT: Friday, October 4, 2013 11:48 AM >>> SUBJECT: [Observium] Observium Community / Professional >>> >>> Hi Guys, >>> >>> As we talked about in April, to sustain development we need to develop a >>> revenue stream. >>> >>> The temporary solution in April was the Kickstarter, which funded 6 >>> months of development for the alerting system. To fund development after >>> that, we've decided to try a relatively inexpensive subscription scheme. >>> >>> http://www.observium.org/Edition_Split [1] >>> >>> The intention is to provide enough for free to keep the people who >>> wouldn't ever pay happy, and try to keep the price low enough that >>> everyone else can pay without worrying too much about it. >>> >>> We've set the subscription at £100/year. If you were a Kickstarter >>> supporter, you'll get a free subscription for a while, because we're >>> nice like that. >>> >>> Comments? :) >>> >>> adam. >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [2] >>> >>> >>> >>> Links: >>> ------ >>> [1] http://www.observium.org/Edition_Split >>> [2] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

sign up for pro service
by Zach Underwood 06 Oct '13

06 Oct '13

I am backer of $100 on kickstarter, how do I get a log on for the pro version of svn. -- Zach Underwood (RHCE,RHCSA,RHCT,UACA) My website <http://zachunderwood.me> My photos <http://zunder1990.openphoto.me>

3 4

boo! re: mkpasswd
by Rob VanHooren 06 Oct '13

06 Oct '13

boo! md5 is deprecated. (read: cracked) http://tools.ietf.org/html/rfc6151 sha1 is likely to suffer the same fate. able to use at least sha256 ? R. On 2013-10-06, at 7:00 AM, observium-request(a)observium.org wrote: > Send me a password hash from 'mkpasswd -5' and a username and I'll add > you to the user list. > > Thanks, > adam.

2 1

Re: [Observium] Observium Community / Professional
by Gerwin Krist 05 Oct '13

05 Oct '13

Hi, I understand the change. And personally I think the price is oke, but I don't hope it will sky-rocket in the near feature. For us the MOST important thing is the Alerting (eg. IF up/down) part. But right now it's very limited and not working very well for us. Make it more less-complicated would be nice :-D When we can use it as reliable monitoring platform too, we are in! One other part: also support RHEL/CENTOS. It's an widely used enterprise OS and can't be ignored imho. - Gerwin

1 0

No Auth - adding new graph_type
by Micah Young 04 Oct '13

04 Oct '13

Hi, So I'm adding a new graph type and new sub-type but even as an administrator, it shows up as the pinked out No-Auth image. Did I miss a step? Mike Y. ________________________________ ARDEN A Global Company Celebrating over 48 years of making your life more comfortable! This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. This OUTBOUND E-mail and Document(s) has been scanned by an Antivirus Server.

1 0

Bug in SLA addition?
by Eric Stewart 04 Oct '13

04 Oct '13

Putting together a test box on CentOS 6.4 today to get a feel for it. If it works for us (though there are some hurdles), we'll look at it as a long term replacement to our largely homegrown MRTG installation. One of the many things I was happy to find that Observium is doing out of the box is Cisco IP SLA graphing. However, I'm running into an issue. The rrds are not being created and the graphs are empty. I set up config.php to enable_sla, and taking a clue from something I came across in the archives, I ran: ./poller.php -d -h <hostname> In the debug, a couple of things show up: SLA 121: jitter IP SLA SVC to Villages Low Priority... RRD[/usr/bin/rrdtool create /usr/local/apps/observium/rrd/<hostname>/sla-121.rrd \ DS:rtt:GAUGE:600:0:300000 --step 300 RRA:AVERAGE:0.5:1:2016 RRA:AVERAGE:0.5:6:2976 RRA:AVERAGE:0.5:24:1440 RRA:AVERAGE:0.5:288:1440 RRA:MIN:0.5:6:1440 RRA:MIN:0.5:96:360 RRA:MIN:0.5:288:1440 RRA:MAX:0.5:6:1440 RRA:MAX:0.5:96:360 RRA:MAX:0.5:288:1440 ] ERROR: can't parse argument ' DS:rtt:GAUGE:600:0:300000' 17ms at 2013-10-03 11:11:59RRD[cmd[update /usr/local/apps/observium/rrd/<hostname>/sla-121.rrd 1380813119:17] stdout[ERROR: opening '/usr/local/apps/observium/rrd/<hostname>/sla-121.rrd': No such file or directory] stderr[]] SLA 130: jitter IP SLA SVC to Mote High Priority... RRD[/usr/bin/rrdtool create /usr/local/apps/observium/rrd/<hostname>/sla-130.rrd \ DS:rtt:GAUGE:600:0:300000 --step 300 RRA:AVERAGE:0.5:1:2016 RRA:AVERAGE:0.5:6:2976 RRA:AVERAGE:0.5:24:1440 RRA:AVERAGE:0.5:288:1440 RRA:MIN:0.5:6:1440 RRA:MIN:0.5:96:360 RRA:MIN:0.5:288:1440 RRA:MAX:0.5:6:1440 RRA:MAX:0.5:96:360 RRA:MAX:0.5:288:1440 ] ERROR: can't parse argument ' DS:rtt:GAUGE:600:0:300000' 10ms at 2013-10-03 11:12:03RRD[cmd[update /usr/local/apps/observium/rrd/<hostname>/sla-130.rrd 1380813123:10] stdout[ERROR: opening '/usr/local/apps/observium/rrd/<hostname>/sla-130.rrd': No such file or directory] stderr[]] So obviously there's an "ERROR" there about parsing one of the arguments fed to the file creation. Any ideas? -- Eric Stewart - Network Administrator - eric(a)usf.edu University of South Florida, Information Technology

3 5

Running observium on multiple hosts
by Eric Stewart 03 Oct '13

03 Oct '13

I'm looking for some feedback/ideas on how others may have implemented Observium in a multi-site capacity. We are currently using MRTG to provide our data collection and graphing. While Observium isn't a perfect replacement for us, it goes a long way towards replacing much of what MRTG does. Our current setup involves a large university campus. We have core, distribution, and access layers, and at the distribution layers we've implemented monitoring systems for packet capture and (you guessed it) MRTG. This allows for: - Data collection to continue even if a distribution layer site is isolated from the core - Prevents data collection bandwidth from impacting the core Our MRTG data presentation is largely homegrown, and how we go about it isn't important. What I'm looking for are suggestions on how one might take a multi-server setup and allow someone to search or navigate to a given building or switch without having to guess as to which distribution site it's out of. Ideas rattling around my head right now involve: - Coding up the search function so that it not only searches the local site, but also all of the other servers - Coming up with some static page that indicates that a given building is off of a given installation - this one I don't like so much So I'm wondering if this is something someone else has put time and effort into and has a viable solution. -- Eric Stewart - Network Administrator - eric(a)usf.edu University of South Florida, Information Technology

1 0

Device Alerts
by James Bensley 02 Oct '13

02 Oct '13

Hi everyone, On the main front page of Observium (the Overview/dashboard), the device alerts table never seems to empty. I guess it works on a maximum number of entries scheme, new alerts are displayed at the top as they occur and old ones are dropped off the bottom. It looks like we always have problems on our NOC display. Is it possible to remove items from the list, clear them off somehow? Many thanks, James.

4 5

Re: [Observium] bgp idle
by Rob VanHooren 02 Oct '13

02 Oct '13

shut the neighbor and it'll go away within 5min when the remote is ready, unshut that neighbor. R. Sent from my iPhone On Oct 2, 2013, at 14:32, observium-request(a)observium.org wrote: >> hen that remote peer is >> ready, they will re-establish the peering session, until I don't need >> to know the session is idle :)

2 1

Need help with 2 minor issues
by Wes Zastrow 02 Oct '13

02 Oct '13

I'm having difficulty with 2 settings: I've added: $config['frontpage']['map']['dotsize'] = 5; This is not changing the size of the dot. I've also added: $config['title_image'] = "images/my-logo.png"; This is not changing the logo on the top left of the web interface. Your help is greatly appreciated, thanks! ~Wes CONFIDENTIALITY NOTICE: This electronic message transmission contains information from assure360, which may be confidential. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the content of this information is prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the original message and any attachment without reading or saving in any manner.

1 0

Re: [Observium] Device Alerts
by Adam Armstrong 02 Oct '13

02 Oct '13

That page is how it is, you cant remove things from it because its showing state. Rebooted information goes away after 24 hours. Its actually showing you devices with uptime below 24 hours. Adam. James Bensley <jwbensley(a)gmail.com> wrote: >Hi Tom, > >Thanks for the response. > >I don't think I was very clear before, so I will try to be clearer now; > >Here is a screen shot of the device alerts pane at present ; >http://i.imgur.com/SNpEPXD.png > >My first query is how long will those "device rebooted" notifications >be there? OK, some devices where rebooted, I have seen this and am >thankful for this, I have also acted upon this information, now I do >not need to see that information anymore, especially 10 hours after it >occurred and I've dealt with it. Now do you see why I would like to be >able to "clear off" alerts? > >Also looking at that screen shot, you will see some idle BGP sessions. >One if those is long term (in relation to BGP timers, it will be down >for a week or so), so I don't want that alert there for the next week, >again I'd like to be able to clear it off. When that remote peer is >ready, they will re-establish the peering session, until I don't need >to know the session is idle :) > >Any help you can provide is greatly appreciated. > >Many thanks, >James. >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

separate diskio graphs for different devices
by Mihai - Cristian Satmarean 02 Oct '13

02 Oct '13

Hi all, is it possible to have a separate graph for each entity in the DiskIO? Scenario is that we try to monitor ZFS server and there are over 200 Filesystems that are shown on top of each other making the graph impossible to use. Thanks!

2 2

Graphs broken after update
by Evgeniy Movlyan 01 Oct '13

01 Oct '13

Hi to all. My observium worked perfect for about a month. But yesterday i made an update (to rev. 4572): #cd /opt/observium #svn update #./discovery.php -h none After that i have next problem: - in servers overview tab all graphs ok - when i'm clicking for example on Memory Usage graph, all is ok. I can see graph for last 24 hours - but when i'm clicking on Show legend/Graph previous/etc there is no graph Thanks for your help, and sorry for my english. -- Regards, Evgenii Movlian

2 1

Re: [Observium] Cisco 4900M temperature sensors not displayed
by Adam Armstrong 30 Sep '13

30 Sep '13

Sounds like typical Cisco bugs. You should probably verify that your device is populating the correct MIBs before you moan at us. Adam. Sidney Boumendil <sidney.boumendil(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

Adding a custom OID ?
by Mihai Tanasescu 30 Sep '13

30 Sep '13

Hello, I'm a newbie with Observium having just installed it, but now a question has popped up in my head that I could not find a clear answer to by googling. I have a couple of Linux hosts for which I also added in the net-snmpd conf a counter for the number of imapd & others processes. How could I add to a small part of the existing graphed servers, this OID ? (or where should I look in the conf ?) I was thinking maybe defining a new template (if this is the working principle) and adding there these OIDs also for the discovery phase. Can someone advise me at least where to start my question with ? I'm a bit confused at the moment. Thanks, Mihai

3 2

How to use removespikes.php?
by Alex Pressé 27 Sep '13

27 Sep '13

If I try to use removespokes.php, I always get the error FATAL: File '' does not exist. root@CORPLNMS01:/opt/observium/rrd/phlinfrtr01# ../../scripts/removespikes.php -R port-10.rrd FATAL: File '' does not exist. The same named perl script runs but doesn't remove 1gbit spikes on 2mbit links... -- Alex Presse "How much net work could a network work if a network could net work?"

2 3

Aggregate Graphing?
by Luis Quintana 27 Sep '13

27 Sep '13

I was looking at the graphing off of the main page, where you select All Devices, then Bits, and had a quick question about this. I assume this is an aggregate of all interfaces being displayed. What I am curious to know is if the graphs show interfaces that are "technically" duplicates? For example, a straight interface on a juniper device can be ge-1/0/0, but because there is a unit attached to the interface, sort of like a sub-interface, ge-1/0/0.0 shows up as well. The problem here is, its the same statistics for both of the interfaces, in this example. So, if the aggregate graph is looking at all interfaces and includes both in the aggregate graph, well than the aggregate is not correct? Not sure if I explained it correctly, and if not, please let me know. What i am getting at is, it seems as though there is duplicate information being aggregated so the graphs is not accurate, from what it looks like. Thoughts?

2 2

Cisco ASA per VPN-tunnel traffic
by Pekka.Panula＠sofor.fi 27 Sep '13

27 Sep '13

Hi Could use Cisco ASA per VPN tunnel traffic stats. I think its available thru SNMP ? So my Observium does not show them, so its not currently collecting info per vpn-tunnel ? Regards, Pekka Panula

2 1

Re: [Observium] Weird Patterns on Screen in Routing section under CEF?
by Tom Laermans 26 Sep '13

26 Sep '13

We havent found a way to visualize cef so we just display the magic inside your router's memory right now. Enjoy.... Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Luis Quintana" <sla07(a)earthlink.net> To: "Observium Network Observation System" <observium(a)observium.org> Subject: [Observium] Weird Patterns on Screen in Routing section under CEF? Date: Thu, Sep 26, 2013 19:16 So, am I the only one that has seen this? Like watching scrambled tv. Not sure what thats about but i only see it when i clicked on the CEF tab under the Routing section. Very trippy hah!

2 1

Weird Patterns on Screen in Routing section under CEF?
by Luis Quintana 26 Sep '13

26 Sep '13

So, am I the only one that has seen this? Like watching scrambled tv. Not sure what thats about but i only see it when i clicked on the CEF tab under the Routing section. Very trippy hah!

1 0

Problems after sync to 4532
by Andrew Hunstiger 26 Sep '13

26 Sep '13

Sorry if this is the wrong channel to send this to. Not sure what happened, but after syncing to the latest version the web portal seems to be broken. Checking the logs the poller is still working, I just can't access the web page any more. Checking the error logs the only two events that keep popping up when I try to load the page are: [Wed Sep 25 09:29:53 2013] [error] [client xxx.xxx.xxx.xxx] PHP Parse error: syntax error, unexpected T_SL in /opt/observium/html/index.php on line 212 [Wed Sep 25 09:52:04 2013] [error] [client xxx.xxx.xxx.xxx] PHP Parse error: syntax error, unexpected T_SL in /opt/observium/html/index.php on line 215 Line 212 points to the start of what I pasted in below. The only part that stood out to me (I honestly have no idea what I am doing, just trying to troubleshoot) is what I highlighted below: { // Warn about lack of mcrypt unless told not to. <<<<<<< .mine <<<<<<< .mine <<<<<<< .mine if($config['login_remember_me'] = FALSE && (!function_exists('mcrypt_decrypt') || !function_exists('mcrypt_encrypt'))) ======= if($config['login_remember_me'] == TRUE && (!function_exists('mcrypt_decrypt') || !function_exists('mcrypt_encrypt'))) ======= if($config['login_remember_me'] = TRUE && (!function_exists('mcrypt_decrypt') || !function_exists('mcrypt_encrypt'))) ======= if($config['login_remember_me'] == TRUE && (!function_exists('mcrypt_decrypt') || !function_exists('mcrypt_encrypt'))) >>>>>>> .r4532 >>>>>>> .r4471 >>>>>>> .r4532 { print_error('Observium now requires mcrypt to be installed for use by the "remember me" function. Please install the php5-mcrypt package on Ubuntu/Debian or the php-mcrypt package on RHEL/Centos. Alternatively, you can disable this $ } // Authenticated. Print a page. if (isset($vars['page']) && !strstr("..", $vars['page']) && is_file("pages/" . $vars['page'] . ".inc.php")) { include("pages/" . $vars['page'] . ".inc.php"); } else { if (isset($config['front_page']) && is_file($config['front_page'])) { include($config['front_page']); } else { include("pages/front/default.php"); } } } } Once I commented those lines out, the page was able to load without any problems. // <<<<<<< .mine // <<<<<<< .mine // <<<<<<< .mine if($config['login_remember_me'] = FALSE && (!function_exists('mcrypt_decrypt') || !function_exists('mcrypt_encrypt'))) // ======= if($config['login_remember_me'] == TRUE && (!function_exists('mcrypt_decrypt') || !function_exists('mcrypt_encrypt'))) // ======= if($config['login_remember_me'] = TRUE && (!function_exists('mcrypt_decrypt') || !function_exists('mcrypt_encrypt'))) // ======= if($config['login_remember_me'] == TRUE && (!function_exists('mcrypt_decrypt') || !function_exists('mcrypt_encrypt'))) // >>>>>>> .r4532 // >>>>>>> .r4471 // >>>>>>> .r4532 Also, once I did the sync, there was an error (wish I wrote it down first) when running the "./discovery.php -h none" command. I had to follow the following article to fix the problem: http://stackoverflow.com/questions/16677558/startup-unable-to-load-dynamic-… Andrew [Description: Description: Description: email_web address] Andrew Hunstiger - Network Administrator I 1500 N. Greenville Ave., Suite 500 Richardson, TX 75081 Phone: 972.866.3545 Fax: 972.866.3301 Email: Andrew.Hunstiger(a)argodata.com<mailto:Andrew.Hunstiger@argodata.com> --------------------------------------------------- Confidentiality Notice: This electronic mail transmission is confidential, may be privileged and should be read or retained only by the intended recipient. If you have received this transmission in error, please immediately notify the sender and delete it from your system.

5 6

Re: [Observium] notify
by Rob VanHooren 26 Sep '13

26 Sep '13

on that note, when considering thresholds in the alert system, one desirable feature may be to trigger on 'zero' as well as some upper bound. i.e., my demarc might be just fine, but if somebody stops sending me traffic on a provisioned link, release the hounds! (because they'll blame my link anyway) R. On 2013-09-26, at 7:00 AM, observium-request(a)observium.org wrote: >> Is there a way to configure Observium to notify us when there is >> packet loss to any of the configured devices? > > Nope. > > adam.

1 0

packet loss
by Joshua Elson 25 Sep '13

25 Sep '13

Is there a way to configure Observium to notify us when there is packet loss to any of the configured devices? ________________________________ This electronic mail (including any attachments) may contain information that is privileged, confidential, and/or otherwise protected from disclosure to anyone other than its intended recipient(s). Any dissemination or use of this electronic mail or its contents (including any attachments) by persons other than the intended recipient(s) is strictly prohibited. If you have received this message in error, please notify us immediately by reply e-mail so that we may correct our internal records. Please then delete the original message (including any attachments) in its entirety.

2 1

port charts are broke
by Zach Underwood 25 Sep '13

25 Sep '13

version=4534 os=centos 6.4 64bit The error "[Wed Sep 25 15:10:26 2013] [error] [client 192.168.128.151] File does not exist: /opt/observium/html/graphs, referer: http://192.168.128.240/graphs/type=port_bits/to=1380136072/id=1533/from=138… " Here is a screenshot [image: Inline image 1] -- Zach Underwood (RHCE,RHCSA,RHCT,UACA) My website <http://zachunderwood.me> My photos <http://zunder1990.openphoto.me>

6 8

Re: [Observium] Interface description, auto-add to billing?
by Adam Armstrong 25 Sep '13

25 Sep '13

Oh man. This is an ancient historical feature from like 2009 that I think broke in 2009 :) The enabling/disabling option is still in the config. But it won't work. Adam Luis Quintana <sla07(a)earthlink.net> wrote: >I could have sworn I had seen something where I can enable an auto-add feature in order for ports to be automatically added, into the billing piece, with a particular pattern in the port description. Is this something that is available or will be available? i cant seem to find it again for some reason and I remember even seeing the pattern that was given, which would need to change in my particular instance. Any ideas on this one? >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Interface description, auto-add to billing?
by Luis Quintana 25 Sep '13

25 Sep '13

I could have sworn I had seen something where I can enable an auto-add feature in order for ports to be automatically added, into the billing piece, with a particular pattern in the port description. Is this something that is available or will be available? i cant seem to find it again for some reason and I remember even seeing the pattern that was given, which would need to change in my particular instance. Any ideas on this one?

1 0

SQL query instead of port detail
by Wolfgang Eitel 25 Sep '13

25 Sep '13

hi. I just installed another instance ob observium. While my first one is working like a charm (installed 6 weeks ago) this one has a strange behaviour. For example: When I click on a device and then click on the showed graph I do net get the port details with more detailed RRD graph (where you can changes the range with time and date). Instead only a SQL query is showed :( Any ideas what causes the issue? best, Wolfgang

2 2

Polling Intervals
by Robbie Wright 24 Sep '13

24 Sep '13

So we're relatively new to Observium and hacking out way through getting it integrated and tested in our environment. One common thing (that we can't find in the faq's or documentation) other tools use is the ability to change polling intervals. On our edge firewall, we might want one minute queries while on SAN volumes we might want 30 minute disk checks. Is there any way to adjust that per device/device type/globally? Robbie Wright Siuslaw Broadband <http://siuslawbroadband.com> 541-902-5101 **For support issues, please email support(a)siuslawbroadband.com.**

2 2

Disable auto adding ports on Mikrotik PPPoE Server
by Petar Janev 24 Sep '13

24 Sep '13

Hi I have two Mikrotik PPPoE Servers added to Observium and it constantly adding new ports as users get connected with PPPoE ports, and then deleted as user disconnects. After some time a lot of ports appear in Deleted Port, that I need to manually delete them, and also disk space grows as new rrd's gets created. I tried adding "bad_if" in config file but without success, because this interfaces don't have description. Also is there any way to permanently delete this previously added port from database and rrd folder. Thanks, Petar Janev

4 9

macsuck CAM tables?
by Joel Krauska 24 Sep '13

24 Sep '13

I would love to see a Mac Address forwarding table grab in observium for L2 devices. Maybe it's already there, but I couldn't find it. In NetDisco, this feature is implemented using the 'macsuck' tool. *http://www.netdisco.org/readme.html#glossary* I've implemented it before in sloppy perl using the Bridge mib. * http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a008… * The gist for collection is: - determine the list of active vlans - for each vlan get a list of mac addresses per 'bridge port' - lookup a translation of bridgeport to ifindex If you correlate this data with a global ARP table and DNS, you get a killer feature. "Lookup the switch port where a given host was last seen. (and hopefully where it still is)" Because this can be a pretty dynamic dataset, you'll also probably want to maintain the list by putting a last seen datestamp and rolling out old entries. I think I've found a few hints at some development interest in the past about this sort of feature. Has it gotten any traction? Cheers, Joel

1 0

LLDP not working
by Zach Underwood 24 Sep '13

24 Sep '13

version=4524 Has something happened to the LLDP code. I noticed that LLDP mapping is no longer working. -- Zach Underwood (RHCE,RHCSA,RHCT,UACA) My website <http://zachunderwood.me> My photos <http://zunder1990.openphoto.me>

2 1

Alerts
by Jason Lixfeld 21 Sep '13

21 Sep '13

Adam, I know it's early, since it's just been committed, but are we allowed to ask about the alerts stuff yet, after having poked around a bit, or is it preferred we wait until the documentation is released? Thanks! (...and great work, by the way, guys!)

2 5

cisco chassis temperature sensors gone
by Nikolay Shopik 20 Sep '13

20 Sep '13

Hey, I've just noticed, we have no longer have chasis temperature senors on any Cisco 3560 switches, while it still shows temperature from SFP modules. Debug discovery snmpwalk shows sensor name only, no entSensorValue. Was it polled other way before? Evenlog says its gone like months ago, on march of this year :)

1 0

Unable to override sysLocation
by Colin Anderson 19 Sep '13

19 Sep '13

Hi, I recently updated and now when I check the box to Override sysLocation on the Device Properties, it does not un-greyout (tm) the Custom Location field on the web page to let me type anything in. Can anyone confirm if this is a bug? I'm on 4497. Thanks, Colin Anderson

3 2

graphs: broken images
by Micah Young 18 Sep '13

18 Sep '13

Hi, Firstly, the process to add graphs is a nice and simple one, so thanks for that. I'm trying to add graphs with different configurations and variable names, and I think I've gotten somewhere, however I'm getting a broken graphs image. I've checked for extra whitespace and have not found any. Neither do I end the files with "?>"; Any idea what the problem might be? Thanks, Mike Y. PS: after running for some time, I get an error reported by the RRDTool but no specifics. Attached is image of the broken graphs. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Zach Underwood Sent: Saturday, September 14, 2013 6:02 PM To: Observium Network Observation System Subject: Re: [Observium] eventlog is broke I have just updated to 4493 and it is working again thanks. On Sat, Sep 14, 2013 at 5:51 PM, Adam Armstrong <adama(a)memetic.org<mailto:adama@memetic.org>> wrote: Should be fixed now. It was a <? tag in a definitions file. CentOS's php.ini disables short open tags. :) adam. On 2013-09-14 20:52, Zach Underwood wrote: Yes I am running on Centos 6.4 x64 On Sat, Sep 14, 2013 at 3:51 PM, Adam Armstrong <adama(a)memetic.org<mailto:adama@memetic.org>> wrote: Centos, perchance? Looks like mod_rewrite is not picking up rules from .htaccess anymore. Odd. No one has touched .htaccess for years. Adam. Zach Underwood <zunder1990(a)gmail.com<mailto:zunder1990@gmail.com>> wrote: I was looking in /opt/observium/logs/error_log and I found this in the log. [Sat Sep 14 15:34:49 2013] [error] [client 10.90.0.107] File does not exist: /opt/observium/html/overview, referer: http://192.168.128.240/overview/ [1] On Sat, Sep 14, 2013 at 3:45 PM, Adam Armstrong <adama(a)memetic.org<mailto:adama@memetic.org>> wrote: Broken, broken, broken, broken. Grammaarrggghhhhhhhhhhh. Zach Underwood <zunder1990(a)gmail.com<mailto:zunder1990@gmail.com>> wrote: After looking at some logs, I updated September 12, 2013, 13:00 EST then again September 14, 2013, 13:32 EST. After the update today it was broke. On Sat, Sep 14, 2013 at 3:33 PM, Adam Armstrong <adama(a)memetic.org<mailto:adama@memetic.org>> wrote: Finding which revision broke it would be helpful :-) Nothing has obviously changed recently which should break it. Adam. Zach Underwood <zunder1990(a)gmail.com<mailto:zunder1990@gmail.com>> wrote: I am not sure if it is CSS. After more looking, all pages are broken. The only page that is working is the home page. Before today the last version I was running was from the past 7 days. I can send more screenshots if needed. On Sat, Sep 14, 2013 at 3:17 PM, Adam Armstrong <adama(a)memetic.org<mailto:adama@memetic.org>> wrote: I note that he didn't specify what he updated from :) Anyways, I've tested it on demo, and it seems to work fine. adam. On 2013-09-14 20:12, Tom Laermans wrote: 4492 didn't touch css, so why do you think so? :o Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Zach Underwood" <zunder1990(a)gmail.com<mailto:zunder1990@gmail.com>> To: "Observium Network Observation System" <observium(a)observium.org<mailto:observium@observium.org>> Subject: [Observium] eventlog is broke Date: Sat, Sep 14, 2013 19:48 It looks like the CSS may be broke after I updated to 4492. I have attached a screenshot -- Zach Underwood (RHCE,RHCSA,RHCT) My website [1] My photos [2] Links: ------ [1] http://zachunderwood.me [2] [2] http://zunder1990.openphoto.me [3] _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [4] _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [4] -- Zach Underwood (RHCE,RHCSA,RHCT) My website [2] My photos [3] ------------------------- observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [4] -- Sent from my Android device with K-9 Mail. Please excuse my brevity. _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [4] -- Zach Underwood (RHCE,RHCSA,RHCT) My website [2] My photos [3] ------------------------- observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [4] -- Sent from my Android device with K-9 Mail. Please excuse my brevity. _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [4] -- Zach Underwood (RHCE,RHCSA,RHCT) My website [2] My photos [3] ------------------------- observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [4] -- Sent from my Android device with K-9 Mail. Please excuse my brevity. _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [4] -- Zach Underwood (RHCE,RHCSA,RHCT) My website [2] My photos [3] Links: ------ [1] http://192.168.128.240/overview/ [2] http://zachunderwood.me [3] http://zunder1990.openphoto.me [4] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Zach Underwood (RHCE,RHCSA,RHCT) My website<http://zachunderwood.me> My photos<http://zunder1990.openphoto.me> ________________________________ ARDEN A Global Company Celebrating over 48 years of making your life more comfortable! This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. This OUTBOUND E-mail and Document(s) has been scanned by an Antivirus Server.

2 3

Re: [Observium] eventlog is broke
by Tom Laermans 14 Sep '13

14 Sep '13

4492 didn't touch css, so why do you think so? :o Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Zach Underwood" <zunder1990(a)gmail.com> To: "Observium Network Observation System" <observium(a)observium.org> Subject: [Observium] eventlog is broke Date: Sat, Sep 14, 2013 19:48 It looks like the CSS may be broke after I updated to 4492. I have attached a screenshot -- Zach Underwood (RHCE,RHCSA,RHCT) My website My photos

4 12