- observium - lists.observium.org

debian7 interupts raised 10x times
by Nikolay Shopik 07 May '13

07 May '13

Hey anyone upgraded to debian7 and noticed interrupts raised like 10x times? At first I though it server specific issue, but when I upgraded completely different hardware and noticed same thing even w/o booting into new kernel. So we had at one server about 160 and now 1700, and other server 280 now 1800. Also context switches increased 5-6 times from 500 to 3,5K now.

2 2

Re: [Observium] Observium with Hyper-v
by Adam Armstrong 07 May '13

07 May '13

The existence or not of a hypervisor has little to no bearing on the graphing of the networking counters maintained by the OS. You give virtually zero information on exactly what you are trying to do. Adam. Patrick Goldbach <gbachs(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Getting wierd spike graph
by Kristjan Hinn - PERH 07 May '13

07 May '13

Hello, Im having trouble graphing Avaya ERS5530 switches. Graphs generated have very wierd spikes of ~700 Gbps what is impossible. I have other switches drawing graphs just fine. And to get this even more wierder one of my eight Avaya ERS5530 is drawing graphs just fine. Picture of the problematic graph: https://dl.dropboxusercontent.com/u/41978197/observium/xtuum1.JPG Has anyone got any idea what could case this? BR, Kristjan Hinn

2 1

Observium with Hyper-v
by Patrick Goldbach 06 May '13

06 May '13

Has anyone been able to have a hyper-v virtual as a device being monitored by Observium successfully capture the network traffic of the hyper-v virtual? -pg

1 0

Adding MIBs
by Gerry Armstrong 06 May '13

06 May '13

Hi Guys, I am new to Observium and so far have found it to be very interesting and would like to know if it is possible to extend the MIBs that are used to include Mitel equipment. I have the MIBs and have uploaded them to the MIB direectory but am not sure how/if I can include these in the discovery/polling so that I get all the info from our Mitel PBXes available via these MIBs. Regards, Gerry

2 3

Re: [Observium] VRF's on a Cisco 6500 series
by Adam Armstrong 06 May '13

06 May '13

The op is running sup2t, so likely quite different code if you have sup & RSP 720s. Adam. Sander Steffann <sander(a)steffann.nl> wrote: >Hi, > >> Better start complaining to Cisco then; read carfully what Adam is saying. >> >> If VRFs are discovered on 7k6 but not on 6k5, it's not Observium's fault, but buggy IOS... ;) > >Very true. I'll compare the 7600's and 6500's I'm working on for a customer as soon as I get the chance. Unfortunately I'll be traveling for the next three weeks, so don't hold your breath :-) > >Cheers, >Sander > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

5 8

[094-19171955-0416] APC Nobreak Sensor :: Input :: Voltage = 0V without alerts
by noc.rodrigo.araujo＠itmnetworks.com.br 05 May '13

05 May '13

Hello, i have many APC nobreaks monitored by Observium. but, if the Sensor :: Input :: Voltage = 0V i not receive Alert. How i can receive Alerts if the nobreak not receive Voltage on Power Input ? Thanks, Rodrigo Araujo ITMNETWORKS Brazil

4 3

Re: [Observium] Kickstarter project.
by Adam Armstrong 04 May '13

04 May '13

Thanks :) Rachid Zarouali <rzarouali(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Kickstarter project.
by Adam Armstrong 04 May '13

04 May '13

Hi All, As promised, we've launched a Kickstarter project to fund development of up/down & threshold alerting. http://www.kickstarter.com/projects/588464062/observium-alerting If you want it, vote with your wallets, guys! :) Thanks, adam.

10 11

Email Alerts
by Carlos Zurita 03 May '13

03 May '13

Hi, I'm test the tool, in this latest version works email alert, TK

2 1

Re: [Observium] Possible bug with whois?
by Adam Armstrong 03 May '13

03 May '13

Only if you disable selinux :D Laurens Vets <laurens(a)daemon.be> wrote: >Found the issue. We are running Observium on CentOS 6 (Yes, we followed >the RHEL documentation to the letter). The default selinux policy does >not allow whois be run from within Apache. After we fixed this, whois >worked. > >Is RHEL/CentOS still an officially supported OS for Observium? > >On 2013-05-02 20:20, Adam Armstrong wrote: >> I have no idea what's causing this. It works fine for me. >> >> It's the whois process getting all badly behaved, so it looks like >> it's their problem. Perhaps that particular version doesn't like >> being >> run from within PHP without a proper terminal? >> >> Of course, you don't tell us the versions of anything you're running >> at all, so I don't know why I'm even bothering... >> >> adam. >> >> On 2013-05-02 14:51, Laurens Vets wrote: >>> Hello list, >>> When Observium tries to do a whois of an RFC 1918 address, whois >>> goes >>> to 100% CPU and stays there... it doesn't seems to exit. I have to >>> manually kill the whois process. >>> Top output: >>> PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND >>> 4480 apache 20 0 12716 1148 908 R 100.0 0.0 5:06.30 whois >>> Process output: >>> [root@box observium]# ps aux | grep whois >>> apache 4479 0.0 0.0 11332 1164 ? S 13:41 0:00 sh >>> -c >>> /usr/bin/whois 10.250.1.1 | grep -v \% >>> apache 4480 99.8 0.0 12716 1148 ? R 13:41 5:15 >>> /usr/bin/whois 10.250.1.1 >>> root 7325 0.0 0.0 103248 836 pts/1 S+ 13:46 0:00 >>> grep whois >>> [root@box observium]# >>> I suspect that either whois should either timeout or don't lookup >>> RFC >>> 1918 addresses (or multicast or loopback?). Or should I wait longer >>> then 5 minutes? >>> Kind regards, >>> Laurens >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 3

User Access Levels
by John Macleod 03 May '13

03 May '13

Is this documented anywhere or did I not look hard enough? Just looking to add a user with the same viewing abilities as an admin, but unable to make any changes. A level of 1 doesn't allow them to view anything at all. 8 more options to try I guess ;)

2 1

Possible bug with whois?
by Laurens Vets 03 May '13

03 May '13

Hello list, When Observium tries to do a whois of an RFC 1918 address, whois goes to 100% CPU and stays there... it doesn't seems to exit. I have to manually kill the whois process. Top output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 4480 apache 20 0 12716 1148 908 R 100.0 0.0 5:06.30 whois Process output: [root@box observium]# ps aux | grep whois apache 4479 0.0 0.0 11332 1164 ? S 13:41 0:00 sh -c /usr/bin/whois 10.250.1.1 | grep -v \% apache 4480 99.8 0.0 12716 1148 ? R 13:41 5:15 /usr/bin/whois 10.250.1.1 root 7325 0.0 0.0 103248 836 pts/1 S+ 13:46 0:00 grep whois [root@box observium]# I suspect that either whois should either timeout or don't lookup RFC 1918 addresses (or multicast or loopback?). Or should I wait longer then 5 minutes? Kind regards, Laurens

2 2

smokeping integration no more working ?
by Rachid Zarouali 03 May '13

03 May '13

i've tried to integration smokeping graphs with observium. i've followed the documentation and add in my config.php : "$config['smokeping']['dir'] = "/usr/share/smokeping/www/cache";" but i can't see the smokeping tab in my devices. devices in smokeping are working perfectly btw any clues?

3 3

Re: [Observium] VRF's on a Cisco 6500 series
by Adam Armstrong 02 May '13

02 May '13

Tell Cisco. :D Kristoffer Björk <kristoffer.bjork(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 5

Re: [Observium] VRF's on a Cisco 6500 series
by Adam Armstrong 02 May '13

02 May '13

6500? Why, that's a switch! No need for qa'd vrf snmp support there! Muwhahaha. Darius Seroka <dariusjs(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 3

VRF's on a Cisco 6500 series
by Darius Seroka 02 May '13

02 May '13

Hi List, Has anyone got a Cisco 6500 series on observium with VRF's? I've recently been adding some cisco gear to observium and the vrf's don't get picked up. It did pick up VRF's from the pair of ASR1002 -- Regards, Darius

1 0

Re: [Observium] up null up, anyone similar?
by Adam Armstrong 02 May '13

02 May '13

This is usually caused by poor network connectivity or high load on the monitored host. Adam. List User <list(a)redspeedservers.com> wrote: >Anyone else have anything similar to this: > >Date Device Entity Message >04/30/13 10:55 PM bravo eth1 ifOperStatus: -> up >04/30/13 10:55 PM bravo eth1 ifAdminStatus: -> up >04/30/13 10:55 PM bravo eth0 ifOperStatus: -> up >04/30/13 10:55 PM bravo lo ifOperStatus: -> up >04/30/13 10:50 PM bravo eth1 ifOperStatus: up -> NULL >04/30/13 10:50 PM bravo eth1 ifAdminStatus: up -> NULL >04/30/13 10:50 PM bravo eth0 ifOperStatus: up -> NULL >04/30/13 10:50 PM bravo lo ifOperStatus: up -> NULL > >over and over in the event log? Weird part is, we have another server in >here (this is the Linux, and one Windows for now) and it only happens to >the Linux one. >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

up null up, anyone similar?
by List User 01 May '13

01 May '13

Anyone else have anything similar to this: Date Device Entity Message 04/30/13 10:55 PM bravo eth1 ifOperStatus: -> up 04/30/13 10:55 PM bravo eth1 ifAdminStatus: -> up 04/30/13 10:55 PM bravo eth0 ifOperStatus: -> up 04/30/13 10:55 PM bravo lo ifOperStatus: -> up 04/30/13 10:50 PM bravo eth1 ifOperStatus: up -> NULL 04/30/13 10:50 PM bravo eth1 ifAdminStatus: up -> NULL 04/30/13 10:50 PM bravo eth0 ifOperStatus: up -> NULL 04/30/13 10:50 PM bravo lo ifOperStatus: up -> NULL over and over in the event log? Weird part is, we have another server in here (this is the Linux, and one Windows for now) and it only happens to the Linux one.

1 0

Re: [Observium] Can't add first host
by Adam Armstrong 30 Apr '13

30 Apr '13

Don't add hosts via the web interface. Adam. Dan McGurk <prenger745(a)yahoo.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Quick question on Brocade VLAN interfaces
by Aaron Mayfield 30 Apr '13

30 Apr '13

I'm running Brocade CER routers in my network at the moment. VLAN interfaces on Brocade are implemented as ve interfaces. Brocade for some reason decided not to implement interface counters for ve interfaces on the CES/CERs, so of course I don't get any utilization graphs for these interfaces. Is anyone out there running MLX or XMR? Out of morbid curiosity, do the VLAN interface octet/packet counters work on them? Thanks

4 5

Can't add first host
by Dan McGurk 30 Apr '13

30 Apr '13

I have tried twice now to set this up, unsuccessfully. I have followed the walk-through for Debian/ubuntu as best I can but still can't get anything to work. I shouldn't say anything. I DO get the webpage and can log in with the user I set-up in the walk-through via command. When I go to the "Add Device" page I get a webpage error at the bottom. I have copied and pasted it here: Webpage error details User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; Tablet PC 2.0; .NET4.0E) Timestamp: Tue, 30 Apr 2013 19:14:18 UTC Message: Expected identifier, string or number Line: 40 Char: 9 Code: 0 URI: http://xx.xx.233.26/addhost/ Message: Invalid character Line: 455 Char: 1 Code: 0 URI: http://xx.xx.233.26/addhost/ Also, when I go to the main page, underneath Devices and Ports..there is a red graphical rectangle with "Permission Denied x" Any ideas or thoughts would be much appreciated! Dan

1 0

Linux agent port change
by Adam Armstrong 30 Apr '13

30 Apr '13

Hi All, I've just changed the default port for the agent from the check_mk port to a port matching our enterprise id, 36602. There's an example script in scripts/observium_agent_xinetd for xinetd. You can now just use the agent script from scripts/observium_agent. Put it into /usr/bin/observium_agent, as matching the xinetd file. Create a /usr/lib/observium_agent directory and a /usr/lib/observium_agent/local directory. Put the agent scripts you want to run in the local directly. To test it, use "telnet localhost 36602". We're still working on a method of keeping the agent up to date on clients :) For the time being the poller will check both the /new/ port and the original check_mk port, but this will be removed in the future. adam.

1 0

User interface access error
by ColoCenter bv 29 Apr '13

29 Apr '13

Hi all, I give my customers access to observium so they can view the traffic from my switch to their network through their port. This used to work great, but now users can't view their port anymore. I get some access denied errors. Giving access to a device still works, to a single interface not. I don't know since what version this bug exists, my customers don't check their traffic every day. Another issue is that in the "all devices" and "all ports" sections they can see all devices that are being monitored by observium, even if they don't have access to it. A small security issue here. Can these issues be fixed? First one has my priority, second one would be nice. Kind regards, -- Alexander Lantink ColoCenter bv http://www.colocenter.nl info(a)colocenter.nl

2 3

Re: [Observium] User interface access error
by Adam Armstrong 29 Apr '13

29 Apr '13

Hmm. Just recently someone tested this and these issues weren't there. I am thinking of stripping out the complex permissions system altogether. Adam. ColoCenter bv <info(a)colocenter.nl> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] attach specific mibs to a device
by Adam Armstrong 29 Apr '13

29 Apr '13

MIBs are not what you think they are :) Short answer is no. Adam. Rachid Zarouali <rzarouali(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 3

attach specific mibs to a device
by Rachid Zarouali 29 Apr '13

29 Apr '13

Hy all, i have several Aruba IAP-93, i was wondering if i can "attach" a specific mib (which is not the same mib for Aruba Controller) to these devices ? thanks for your help, Regards,

1 0

Re: [Observium] Trend prediction
by Adam Armstrong 28 Apr '13

28 Apr '13

This is all done in rrdtool, so purely graphical initially. It is possible to extract this kind of data from rrdtool in numerical form, but it's quite slow, certainly too slow to do in the poller. Also, I would say in this instance you would set a warning at 75%. Much easier :) Adam. Petr Gregor <gregy(a)gregy.cz> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Cisco IOS VLAN update
by observium＠velder.li 28 Apr '13

28 Apr '13

Hi, the description of vlan's in cisco ios isn't updated. If a desc is changed, i need to change it in the observium db manually. Is there a possibility to automate that? Regards patrick

2 1

Is there a way to change the looks of the graphs - to look like "MRTG" charts?
by Sonny Kupka 28 Apr '13

28 Apr '13

Hello, For whatever reasons - I have people asking if it is possible to change the looks of the graphs - to look like "MRTG" charts. Has anyone changed their graphs|looks.. If so care to share your settings? Thanks, Sonny

2 1

Re: [Observium] Kickstarter project.
by Adam Armstrong 25 Apr '13

25 Apr '13

I just ordered a £5k of 28 year old scotch, that count? Err, I mean, ramen. Adam. Mattias Gyllenvarg <Mattias.Gyllenvarg(a)Bredband2.se> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Integration with Nagions/Smokeping - How does it work?
by Sam Munzani 25 Apr '13

25 Apr '13

Hi, I am new to Observium. Downloaded it last week and got a few devices working on it. Did Rancid plug-in and now all configs show up on Observium. I also added following to config.php and have Nagios3 and Smokeping running independently on the same box. However I don't know how its supposed to show up. Rancid was obvious because of the extra tab that shows up. How does it work with nagios and smoke ping? The documentation on these integration is very light. $config['rrdtool'] = "/usr/bin/rrdtool"; $config['fping'] = "/usr/bin/fping"; #$config['fping6'] = "/usr/bin/fping6"; $config['snmpwalk'] = "/usr/bin/snmpwalk"; $config['snmpget'] = "/usr/bin/snmpget"; $config['snmpbulkwalk'] = "/usr/bin/snmpbulkwalk"; $config['whois'] = "/usr/bin/whois"; $config['ping'] = "/bin/ping"; $config['mtr'] = "/usr/bin/mtr"; $config['nmap'] = "/usr/bin/nmap"; $config['nagios_plugins'] = "/usr/lib/nagios/plugins"; $config['ipmitool'] = "/usr/bin/ipmitool"; $config['smokeping']['dir'] = "/var/lib/smokeping/"; #$config['virsh'] = "/usr/bin/virsh"; Also, does it have an ability to add a few URL monitors? I didn't see a reference in the documentation anywhere. Thanks, Sam

4 4

RRD Command button broken
by Mattias Gyllenvarg 24 Apr '13

24 Apr '13

Hi Adam "RRD command" button is broken, it sends you back too the overview page. PS. Favorite BOFH so far "Shut your whore mouth!" -- *Med Vänliga Hälsningar - Best Regards* *Mattias Gyllenvarg* *Nätutveckling* Bredband2 Tel: +46 406219712

2 1

maybe dumb question about observium itself
by Rachid Zarouali 23 Apr '13

23 Apr '13

Hy all, i'm using observium to monitor my network devices, i've seen there are applications that could be as well monitored. are these applications to be maintained or to be dropped ? i'm evaluating zabbix as well, so just wondering if i should keep both ? feedback appreciated, Regards

4 3

Re: [Observium] maybe dumb question about observium itself
by Adam Armstrong 23 Apr '13

23 Apr '13

To make sure this is the case, agent scripts should have the absolute minimum of code. Where possible, just command output or cat'd files, updating php, perl and python scripts after deployment may prove difficult... :) Adam. Tom Laermans <tom.laermans(a)powersource.cx> wrote: >I'll reiterate what I said on IRC: > >Adam feels the current "application" infrastructure is not how it should be. > >However, yes, applications are not going away, just the way they are >monitored may change. Data collection scripts which we have now will >then be converted to whatever new format we'll be using. In the future. >Not now. No time, bugs and alerting first ;-) > >Tom > >On 23/04/2013 11:20, Adam Armstrong wrote: >> The applications stuff is messy. >> >> At some point we need to properly define how it should all work and >> make some real infrastructure for it, but that requires time and >> resource we don't have at the moment. >> >> So it's subject to change at any moment :) >> >> adam. >> >> On 2013-04-23 11:12, Rachid Zarouali wrote: >>> Hy all, >>> >>> i'm using observium to monitor my network devices, i've seen there are >>> applications that could be as well monitored. >>> >>> are these applications to be maintained or to be dropped ? >>> >>> i'm evaluating zabbix as well, so just wondering if i should keep both ? >>> >>> feedback appreciated, >>> >>> Regards >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] maybe dumb question about observium itself
by Andreas Bergman 23 Apr '13

23 Apr '13

Hi, We're using a combination of Icinga (nagios) and Observium to monitor our network, some things Icinga do really well, and some things Observium do very well. Br Andreas -----Original Message----- From: "Rachid Zarouali" <rzarouali(a)gmail.com> Sent 4/23/2013 12:12:41 PM To: "Observium Network Observation System" <observium(a)observium.org> Subject: [Observium] maybe dumb question about observium itself Hy all, i'm using observium to monitor my network devices, i've seen there are applications that could be as well monitored. are these applications to be maintained or to be dropped ? i'm evaluating zabbix as well, so just wondering if i should keep both ? feedback appreciated, Regards _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Changes made to Devices > Locations
by Adam Armstrong 23 Apr '13

23 Apr '13

Damn right Tom Laermans <tom.laermans(a)powersource.cx> wrote: >On Tue, 2013-04-23 at 11:49 +0400, Nikolay Shopik wrote: >> Maybe just don't use it at all? It such junk anyway. What's wrong with >> good old k9mail >> >> On 4/23/13 10:46 AM, Tom Laermans wrote: >> > >> > Can someone please fix the threading breakage in the android client? :P > >Unfortunately I can't tell Adam what to use - he'll just take my mailing >list access away :P > >Tom > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Changes made to Devices > Locations
by Sonny Kupka 23 Apr '13

23 Apr '13

Hello, Seems there was a change in code which effects - Devices > Locations. I had set each device with a specific sysLocation - and checked override sysLocation in the device settings. This was working as expected, until I ran updates - Now instead of having my defined locations - It now shows countries - Canada, England, Unknown and all my stuff is showing up under unknown. Is there a place to read about configuration changes - I may need to re-adjust - or is this a bug - as override sysLocation is now overwritten by something else? Thanks. Sonny

6 10

Re: [Observium] Changes made to Devices > Locations
by Adam Armstrong 23 Apr '13

23 Apr '13

You would not be stupid enough to try to complain about something not working on an old release, would you? Paul Gear <observium(a)gear.dyndns.org> wrote: >I'm talking about reverting to the old behaviour, not getting >geolocation working. > >On 04/23/2013 02:31 PM, Adam Armstrong wrote: >> There is still work to be done on it. >> >> The geolocation service we are using is a little temperamental, so needs well formatted locations. >> >> Adam. >> >> Paul Gear <observium(a)gear.dyndns.org> wrote: >> >>> On 04/23/2013 02:17 PM, Sonny Kupka wrote: >>>> Tom, >>>> >>>> Worked perfectly. >>>> >>>> Thanks. >>>> Sonny >>>> >>>> >>>> ----- Original Message ----- >>>> From: "Tom Laermans" <tom.laermans(a)powersource.cx> >>>> To: "Observium Network Observation System" <observium(a)observium.org> >>>> Sent: Monday, April 22, 2013 4:18:05 PM >>>> Subject: Re: [Observium] Changes made to Devices > Locations >>>> >>>> Hi Sonny, >>>> >>>> You can override the geolocation and return to the old behaviour by adding >>>> >>>> $config['location_menu_geocoded'] = FALSE; >>>> >>>> to your configuration file. I like it better too ;-) >>>> >>>> Tom >>> Does that feature require a particular svn revision? I'm on 3934 and it >>> doesn't work for me. >>> >>> Or does it require something like rediscovery? >>> >>> Paul >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

Re: [Observium] Changes made to Devices > Locations
by Adam Armstrong 23 Apr '13

23 Apr '13

Feel free to consider all bug reports and other complaints ignore from nice on, then. Adam. Paul Gear <observium(a)gear.dyndns.org> wrote: >Where "old release" == "I only do 'svn up' in cron.weekly"? Evidently >so. :-) > >/me updates and tries again > >On 04/23/2013 02:42 PM, Adam Armstrong wrote: >> You would not be stupid enough to try to complain about something not working on an old release, would you? >> >> Paul Gear <observium(a)gear.dyndns.org> wrote: >> >>> I'm talking about reverting to the old behaviour, not getting >>> geolocation working. >>> >>> On 04/23/2013 02:31 PM, Adam Armstrong wrote: >>>> There is still work to be done on it. >>>> >>>> The geolocation service we are using is a little temperamental, so needs well formatted locations. >>>> >>>> Adam. >>>> >>>> Paul Gear <observium(a)gear.dyndns.org> wrote: >>>> >>>>> On 04/23/2013 02:17 PM, Sonny Kupka wrote: >>>>>> Tom, >>>>>> >>>>>> Worked perfectly. >>>>>> >>>>>> Thanks. >>>>>> Sonny >>>>>> >>>>>> >>>>>> ----- Original Message ----- >>>>>> From: "Tom Laermans" <tom.laermans(a)powersource.cx> >>>>>> To: "Observium Network Observation System" <observium(a)observium.org> >>>>>> Sent: Monday, April 22, 2013 4:18:05 PM >>>>>> Subject: Re: [Observium] Changes made to Devices > Locations >>>>>> >>>>>> Hi Sonny, >>>>>> >>>>>> You can override the geolocation and return to the old behaviour by adding >>>>>> >>>>>> $config['location_menu_geocoded'] = FALSE; >>>>>> >>>>>> to your configuration file. I like it better too ;-) >>>>>> >>>>>> Tom >>>>> Does that feature require a particular svn revision? I'm on 3934 and it >>>>> doesn't work for me. >>>>> >>>>> Or does it require something like rediscovery? >>>>> >>>>> Paul >>>>> ... > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Issue with 95th Percentile for Billing
by Poh Yong Hwang 23 Apr '13

23 Apr '13

Hi All, New here. :) I have an issue with the billing of traffic. I want to bill according to 95th percentile but for some reason it is always 0Mbps. It can plot my traffic for incoming and outgoing but it always show 0 for my 95th percentile. Any advise on this? Thanks Poh

2 1

Re: [Observium] Issue with 95th Percentile for Billing
by Adam Armstrong 23 Apr '13

23 Apr '13

You are not running the billing poller. Poh Yong Hwang <yongsan(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Strange timezone behaviour in graphs
by Adam Armstrong 23 Apr '13

23 Apr '13

Still irritating, though. Matt Hucker <matt(a)nrsolutions.com.au> wrote: >Cool. Easy enough to work around. > >Thanks, >Matt > > >On 23/04/2013, at 2:28 PM, Adam Armstrong wrote: > >> Yes. This is down to some funkiness with timezones between client and server. >> >> It has been known for a while. The last attempted fix was reverted because it broke things even more! >> >> Adam. >> >> Matt Hucker <matt(a)nrsolutions.com.au> wrote: >> >>> Hi, >>> >>> I'm not sure what to make of this. When I try to enter custom time ranges in any of the traffic graphs, I get different results depending on which browser I'm using. >>> >>> Results are as follows. I'm in Brisbane (GMT +10). >>> >>> Mac OS X 10.6 >>> >>> Firefox: Observium always converts the time I enter (in local time) to GMT. Therefore my graphs are out by 10 hours. >>> Safari: Won't accept any time info I enter. Always give me the last 24 hours. >>> Chrom: Everything seems to work ok. >>> >>> Windows 7 >>> >>> Internet Explorer: Always gives me the last 24 hours. Same as Safari on OS X >>> Chrome: Everything seems ok. >>> >>> >>> Clicking any of the preset time periods, e.g 6 / 24 / 48 hours, always works ok regardless of which browser/os I'm using. >>> >>> Is this expected behaviour? >>> >>> Cheers, >>> Matt. >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Strange timezone behaviour in graphs
by Adam Armstrong 23 Apr '13

23 Apr '13

Yes. This is down to some funkiness with timezones between client and server. It has been known for a while. The last attempted fix was reverted because it broke things even more! Adam. Matt Hucker <matt(a)nrsolutions.com.au> wrote: >Hi, > >I'm not sure what to make of this. When I try to enter custom time ranges in any of the traffic graphs, I get different results depending on which browser I'm using. > >Results are as follows. I'm in Brisbane (GMT +10). > >Mac OS X 10.6 > >Firefox: Observium always converts the time I enter (in local time) to GMT. Therefore my graphs are out by 10 hours. >Safari: Won't accept any time info I enter. Always give me the last 24 hours. >Chrom: Everything seems to work ok. > >Windows 7 > >Internet Explorer: Always gives me the last 24 hours. Same as Safari on OS X >Chrome: Everything seems ok. > > >Clicking any of the preset time periods, e.g 6 / 24 / 48 hours, always works ok regardless of which browser/os I'm using. > >Is this expected behaviour? > >Cheers, >Matt. >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] Changes made to Devices > Locations
by Adam Armstrong 23 Apr '13

23 Apr '13

There is still work to be done on it. The geolocation service we are using is a little temperamental, so needs well formatted locations. Adam. Paul Gear <observium(a)gear.dyndns.org> wrote: >On 04/23/2013 02:17 PM, Sonny Kupka wrote: >> Tom, >> >> Worked perfectly. >> >> Thanks. >> Sonny >> >> >> ----- Original Message ----- >> From: "Tom Laermans" <tom.laermans(a)powersource.cx> >> To: "Observium Network Observation System" <observium(a)observium.org> >> Sent: Monday, April 22, 2013 4:18:05 PM >> Subject: Re: [Observium] Changes made to Devices > Locations >> >> Hi Sonny, >> >> You can override the geolocation and return to the old behaviour by adding >> >> $config['location_menu_geocoded'] = FALSE; >> >> to your configuration file. I like it better too ;-) >> >> Tom > >Does that feature require a particular svn revision? I'm on 3934 and it >doesn't work for me. > >Or does it require something like rediscovery? > >Paul > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] FW: observium Digest, Vol 33, Issue 45
by Adam Armstrong 23 Apr '13

23 Apr '13

You are not our target market, then. Sam Munzani <smunzani(a)gmail.com> wrote: >> >> >> >>On 2013-04-22 15:32, Sam Munzani wrote: >>> Hi, >>> >>> I deployed Observium over the weekend to try out. Reading through >>> documents, I figured out how to exclude specific interface types. >>> However trying to figure out how to exclude a specific interface? E.g. >>> The list might be Fa0/30, Fa0/37, Gig0/9, Gig0/42. No contiguous >>> interface. >> >>This is contra to the design ethos of Observium, thus there is no simple >>way to do this. >> >>Thanks, >>adam. > >While its a great concept, its not scalable. I have Qty 40 of the Cisco 48 >port switches and not all ports I care about. These are desktop ports and >I care to graph uplink ports only. Even if it does it efficiently, it is >junk data that I would never use. > >What would have been awesome is let Observium discover everything and let >administrators decide what they want to graph. > >Its sad that even though I like the tool, it doesn't fit me because of >this limitation(or so called feature). > >My 2 cents. > >Sam > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

FW: observium Digest, Vol 33, Issue 45
by Sam Munzani 23 Apr '13

23 Apr '13

> > > >On 2013-04-22 15:32, Sam Munzani wrote: >> Hi, >> >> I deployed Observium over the weekend to try out. Reading through >> documents, I figured out how to exclude specific interface types. >> However trying to figure out how to exclude a specific interface? E.g. >> The list might be Fa0/30, Fa0/37, Gig0/9, Gig0/42. No contiguous >> interface. > >This is contra to the design ethos of Observium, thus there is no simple >way to do this. > >Thanks, >adam. While its a great concept, its not scalable. I have Qty 40 of the Cisco 48 port switches and not all ports I care about. These are desktop ports and I care to graph uplink ports only. Even if it does it efficiently, it is junk data that I would never use. What would have been awesome is let Observium discover everything and let administrators decide what they want to graph. Its sad that even though I like the tool, it doesn't fit me because of this limitation(or so called feature). My 2 cents. Sam

2 1

Strange timezone behaviour in graphs
by Matt Hucker 23 Apr '13

23 Apr '13

Hi, I'm not sure what to make of this. When I try to enter custom time ranges in any of the traffic graphs, I get different results depending on which browser I'm using. Results are as follows. I'm in Brisbane (GMT +10). Mac OS X 10.6 Firefox: Observium always converts the time I enter (in local time) to GMT. Therefore my graphs are out by 10 hours. Safari: Won't accept any time info I enter. Always give me the last 24 hours. Chrom: Everything seems to work ok. Windows 7 Internet Explorer: Always gives me the last 24 hours. Same as Safari on OS X Chrome: Everything seems ok. Clicking any of the preset time periods, e.g 6 / 24 / 48 hours, always works ok regardless of which browser/os I'm using. Is this expected behaviour? Cheers, Matt.

1 0

New memory graphs
by David Brodbeck 22 Apr '13

22 Apr '13

Loving the new, more detailed Linux memory graphs. Much more useful now that I can see how much is actual memory use, and how much is cache that will be expunged as needed. -- David Brodbeck System Administrator, Linguistics University of Washington

1 0

How to exclude some network interfaces?
by Sam Munzani 22 Apr '13

22 Apr '13

Hi, I deployed Observium over the weekend to try out. Reading through documents, I figured out how to exclude specific interface types. However trying to figure out how to exclude a specific interface? E.g. The list might be Fa0/30, Fa0/37, Gig0/9, Gig0/42. No contiguous interface. Thanks in advance, Sam

4 3

Observium VMs wrong OS version
by observium＠velder.li 21 Apr '13

21 Apr '13

Hi there In the virtual machine overview (ESXi Host..), the os version is not correct. I added the VM to observium, when squeeze 6.0.6 was installed. Now it is 6.0.7 (since a few weeks) but observium still says 6.0.6. Is that a bug? Regards, Patrick

2 2

IPMI weirdness
by Robert Williams 21 Apr '13

21 Apr '13

Hi All, For a while now it appears that all our devices which also have IPMI cards are seeing every single sensor added and deleted (in that order) on every poll. A relevant snippet from the debug of one device gives: (319ms) Discover sensor: temperature, Array, , 1, ipmi, System Temp, 1 , 1, -7.000, -5.000, 80.000, 85.000, 31.000 , ipmi, , , , SQL[SELECT COUNT(sensor_id) FROM `sensors` WHERE `poller_type`= 'ipmi' AND `sensor_class` = 'temperature' AND `device_id` = '190' AND sensor_type = 'ipmi' AND `sensor_index` = '1'] SQL[INSERT INTO `sensors` (`poller_type`,`sensor_class`,`device_id`,`sensor_oid`,`sensor_index`,`sensor_type`,`sensor_descr`,`sensor_divisor`,`sensor_multiplier`,`sensor_limit`,`sensor_limit_warn`,`sensor_limit_low`,`sensor_limit_low_warn`,`entPhysicalIndex`,`entPhysicalIndex_measured`,`measured_class`,`measured_entity`) VALUES ('ipmi','temperature','190','','1','ipmi','System Temp','1','1','85.000','80.000','-7.000','-5.000','','','','')] ( 223532 inserted ) + SQL[INSERT INTO `eventlog` (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES ('190','NULL','sensor',NOW(),'Sensor Added: temperature ipmi 1 System Temp')] Discover sensor: temperature, Array, , 2, ipmi, Peripheral Temp, 1 , 1, -7.000, -5.000, 80.000, 85.000, 37.000 , ipmi, , , , SQL[SELECT COUNT(sensor_id) FROM `sensors` WHERE `poller_type`= 'ipmi' AND `sensor_class` = 'temperature' AND `device_id` = '190' AND sensor_type = 'ipmi' AND `sensor_index` = '2'] SQL[INSERT INTO `sensors` (`poller_type`,`sensor_class`,`device_id`,`sensor_oid`,`sensor_index`,`sensor_type`,`sensor_descr`,`sensor_divisor`,`sensor_multiplier`,`sensor_limit`,`sensor_limit_warn`,`sensor_limit_low`,`sensor_limit_low_warn`,`entPhysicalIndex`,`entPhysicalIndex_measured`,`measured_class`,`measured_entity`) VALUES ('ipmi','temperature','190','','2','ipmi','Peripheral Temp','1','1','85.000','80.000','-7.000','-5.000','','','','')] ( 223533 inserted ) + SQL[INSERT INTO `eventlog` (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES ('190','NULL','sensor',NOW(),'Sensor Added: temperature ipmi 2 Peripheral Temp')] Discover sensor: fanspeed, Array, , 4, ipmi, FAN, 1 , 1, 450.000, 600.000, 18975.000, 19050.000, 3150.000 , ipmi, , , , <Repeats for all sensors> …(Section cropped)… <Then the removals follow immediately afterwards> SQL[SELECT * FROM sensors AS S, devices AS D WHERE S.sensor_class='voltage' AND S.device_id = D.device_id AND D.device_id = '190' AND S.poller_type = 'ipmi'] - SQL[DELETE FROM `sensors` WHERE `sensor_id` = '223535'] SQL[INSERT INTO `eventlog` (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES ('190','NULL','sensor',NOW(),'Sensor Deleted: voltage ipmi 5 Vcore')] - SQL[DELETE FROM `sensors` WHERE `sensor_id` = '223536'] SQL[INSERT INTO `eventlog` (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES ('190','NULL','sensor',NOW(),'Sensor Deleted: voltage ipmi 6 3.3VCC')] - SQL[DELETE FROM `sensors` WHERE `sensor_id` = '223537'] SQL[INSERT INTO `eventlog` (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES ('190','NULL','sensor',NOW(),'Sensor Deleted: voltage ipmi 7 12V')] - SQL[DELETE FROM `sensors` WHERE `sensor_id` = '223538'] From what I can tell, it’s doing this for all devices with IPMI, regardless of make / model etc. - and it is only doing it to the IPMI sensors, nothing else is affected. Feedback / suggestions welcome! Cheers :) Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

4 4

Re: [Observium] Reset disk storage values on host
by Adam Armstrong 21 Apr '13

21 Apr '13

Output from discovery for that host with -m storage -d Andrew Lynch <lurch89(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] Reset disk storage values on host
by Adam Armstrong 21 Apr '13

21 Apr '13

Run discovery. Andrew Lynch <lurch89(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Reset disk storage values on host
by Andrew Lynch 21 Apr '13

21 Apr '13

I recently changed the disk configuration on one of my monitored hosts. It seems like the discovery engine is pulling the stats incorrectly and applying them to the wrong disks. Is there an easy way (save for removing and re-adding the entire host) to flush the stats of the storage only? I don't care if it has to completely start from scratch. Thanks! -Andy -- Andrew Lynch (KD0IOE) lurch89(a)gmail.com http://andrewrlynch.com "Scientists study the world as it is; engineers create the world that has never been." —Theodore von Kármán WC

1 0

Subifs no longer showing up for Cisco ASR9K/IOS-XR device after upgrade
by Stephen Fulton 21 Apr '13

21 Apr '13

Hi all, I've been using Observium since January, and I've mostly been happy with it. I upgraded to 0.13.4.3934 yesterday, and since then, none of the sub-interfaces on a ASR9K/IOS-XR 4.3.0 router are being collected. Originally I thought it was due to an upgrade error on my part, so I deleted the host and re-added it, but the sub-interfaces are not being seen and data not being collected. Let me know what information is needed, and I'll present it. -- Stephen

1 0

Re: [Observium] IPMI weirdness
by Robert Williams 21 Apr '13

21 Apr '13

Dear Tom, Pretty please? If you get it working again, at the end there will be cake... :) -----Original Message----- From: observium-bounces(a)observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 20 April 2013 21:44 To: Observium Network Observation System Subject: Re: [Observium] IPMI weirdness You need to be extra nice to Tom, as the IPMI stuff is written by him :) adam. On 2013-04-20 21:25, List User wrote: > I posted this earlier (as did a couple of other people) but it was > never fixed. > > On 4/20/2013 6:33 AM, Robert Williams wrote: > > Hi All, > > For a while now it appears that all our devices which also have IPMI > cards are seeing every single sensor added and deleted (in that order) > on every poll. > > A relevant snippet from the debug of one device gives: > > (319ms) Discover sensor: temperature, Array, , 1, ipmi, System Temp, 1 > , 1, -7.000, -5.000, 80.000, 85.000, 31.000 , ipmi, , , , > > SQL[SELECT COUNT(sensor_id) FROM `sensors` WHERE `poller_type`= 'ipmi' > AND `sensor_class` = 'temperature' AND `device_id` = '190' AND > sensor_type = 'ipmi' AND `sensor_index` = '1'] > > SQL[INSERT INTO `sensors` > (`poller_type`,`sensor_class`,`device_id`,`sensor_oid`,`sensor_index`, > `sensor_type`,`sensor_descr`,`sensor_divisor`,`sensor_multiplier`,`sen > sor_limit`,`sensor_limit_warn`,`sensor_limit_low`,`sensor_limit_low_wa > rn`,`entPhysicalIndex`,`entPhysicalIndex_measured`,`measured_class`,`m > easured_entity`) VALUES > ('ipmi','temperature','190','','1','ipmi','System > Temp','1','1','85.000','80.000','-7.000','-5.000','','','','')] ( > 223532 inserted ) > > + > > SQL[INSERT INTO `eventlog` > (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES > ('190','NULL','sensor',NOW(),'Sensor Added: temperature ipmi 1 System > Temp')] Discover sensor: temperature, Array, , 2, ipmi, Peripheral > Temp, 1 , 1, -7.000, -5.000, 80.000, 85.000, 37.000 , ipmi, , , , > > SQL[SELECT COUNT(sensor_id) FROM `sensors` WHERE `poller_type`= 'ipmi' > AND `sensor_class` = 'temperature' AND `device_id` = '190' AND > sensor_type = 'ipmi' AND `sensor_index` = '2'] > > SQL[INSERT INTO `sensors` > (`poller_type`,`sensor_class`,`device_id`,`sensor_oid`,`sensor_index`, > `sensor_type`,`sensor_descr`,`sensor_divisor`,`sensor_multiplier`,`sen > sor_limit`,`sensor_limit_warn`,`sensor_limit_low`,`sensor_limit_low_wa > rn`,`entPhysicalIndex`,`entPhysicalIndex_measured`,`measured_class`,`m > easured_entity`) VALUES > ('ipmi','temperature','190','','2','ipmi','Peripheral > Temp','1','1','85.000','80.000','-7.000','-5.000','','','','')] ( > 223533 inserted ) > > + > > SQL[INSERT INTO `eventlog` > (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES > ('190','NULL','sensor',NOW(),'Sensor Added: temperature ipmi 2 > Peripheral Temp')] Discover sensor: fanspeed, Array, , 4, ipmi, FAN, 1 > , 1, 450.000, 600.000, 18975.000, 19050.000, 3150.000 , ipmi, , , , > > <Repeats for all sensors> > > …(Section cropped)… > > <Then the removals follow immediately afterwards> > > SQL[SELECT * FROM sensors AS S, devices AS D WHERE > S.sensor_class='voltage' AND S.device_id = D.device_id AND D.device_id > = '190' AND S.poller_type = 'ipmi'] - > > SQL[DELETE FROM `sensors` WHERE `sensor_id` = '223535'] > > SQL[INSERT INTO `eventlog` > (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES > ('190','NULL','sensor',NOW(),'Sensor Deleted: voltage ipmi 5 Vcore')] > - > > SQL[DELETE FROM `sensors` WHERE `sensor_id` = '223536'] > > SQL[INSERT INTO `eventlog` > (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES > ('190','NULL','sensor',NOW(),'Sensor Deleted: voltage ipmi 6 3.3VCC')] > - > > SQL[DELETE FROM `sensors` WHERE `sensor_id` = '223537'] > > SQL[INSERT INTO `eventlog` > (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES > ('190','NULL','sensor',NOW(),'Sensor Deleted: voltage ipmi 7 12V')] - > > SQL[DELETE FROM `sensors` WHERE `sensor_id` = '223538'] > > From what I can tell, it's doing this for all devices with IPMI, > regardless of make / model etc. - and it is only doing it to the IPMI > sensors, nothing else is affected. > > Feedback / suggestions welcome! > > Cheers :) > > Robert Williams > Custodian Data Centre > Email: Robert(a)CustodianDC.com > http://www.CustodianDC.com [2] > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1] > > > > Links: > ------ > [1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > [2] http://www.CustodianDC.com > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] observium post from ronbobius@gmail.com requires approval
by Adam Armstrong 20 Apr '13

20 Apr '13

> What I have done with some 'very important' devices is do just that. > Change the cron entry for specific entries to 1 minute. > > Would this break anything Adam? These are smaller Cisco devices with > few interfaces. > It won't do anything, because the RRD won't store more than one data point every 300 seconds. If you changed the RRD databases, they'd stop storing the normal datapoints, because they would be at the wrong resolution. Like I said, it can't currently be done. You could change the entire installation to be 1-minute, change the RRD template and delete all of the existing RRDs, but you wouldn't want to, because that would be a lot of load on your network and on the observium host. Also, your changes would likely be overwritten by a future update, then you'd be stuffed :) adam.

1 0

Observium Enterprise/Pro licensing
by Adam Armstrong 20 Apr '13

20 Apr '13

Hi All, At some point in the future it's likely that I'm going to split Observium into free and enterprise/pro variants. Observium has historically been developed as a fairly ad hoc project, with work being done as time permits between work projects. We've often had gaps of 6 months where there has been little work done due to other commitments. As the user-base expands this is going to become less and less viable a way of maintaining the project, and we need to be able to devote more time to keeping on top of bug reports and feature development. To be able to devote more time to the project we need to establish a revenue stream to be able to support it. We'd like comments from you guys about how we should go about splitting, what should be in each version, and what we should charge. We're considering: A hosts/ports-based licensing scheme, where you get a certain number free, and any more than that requires a license. A feature-based licensing scheme, where higher-value features such as load balancers, netapp, mac accounting, vpn tracking, etc require a license. Licensing for customer-access, where allowing customers access to the web interface requires a license. What pricing models do you think would work? Options for the ent/pro version include using the honour system, maintaining a separate password-protected SVN repository or distributing an ioncube-protected version. I would prefer to go the honour system route, but I'm not sure how well that would work. Thanks, adam.

16 29

fisheye
by Crozier, Doug 19 Apr '13

19 Apr '13

Is anyone else having problems getting to http://fisheye.observium.org/changelog/Observium?

3 2

Re: [Observium] polling interval
by Adam Armstrong 19 Apr '13

19 Apr '13

This is not possible with observium. Adam. J Z <jzthegeek(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

polling interval
by J Z 19 Apr '13

19 Apr '13

Long-time user and lurker. Many thanks to Adam and those who volunteer their time on this awesome project. I was wondering if there was a way to modify the polling interval (aside from modifying the crontab entry). I know that there was a lot of work that had to be done to decrease the polling interval from 5 to 1 minutes in Cacti, so I imagine it's not as simple as simply changing the crontab entry for Observium to monitor a switch's traffic utilization every 60 seconds. Has anyone successfully done this? Is there something simple I'm missing to get this to work? Many thanks!

1 0

Re: [Observium] APC UPS and remaining Runtime
by Adam Armstrong 19 Apr '13

19 Apr '13

Hi, We currently have no sensor type to capture this. It is on the list, but as with everything else, no time and no resources. Adam. Chris Blake <chrisrblake93(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

APC UPS and remaining Runtime
by Chris Blake 19 Apr '13

19 Apr '13

Hello, Not sure if I am doing this right (using the mailing list) so please don't kill me if I am. I currently have a APC UPS SMT2200RM2U, and I just recently added it to my Observium panel vi SNMP v2c. I see it logs everything from the current load to battery temp, but I am kind of surprised it does not log Battery Run Time Remaining. I checked in the latest APC powernet.mib file, and there is a function to call this. So, I updated the /opt/observium/mib/apc/powernet.mib to the latest version, but observium still does not log or show the remaining run time, which leads me to believe it is not coded into the script. Just wondering if this is a plan for the future, or am I doing everything wrong? Thanks, Chris B

1 0

Polling Rate on a 3750 Stack
by Michael Sweikata 18 Apr '13

18 Apr '13

Is anyone else having huge response times in their polling of a Cisco 3750 stack? I've increased the number of pollers I have to something close to 17, but my 3750s seem to take forever to respond (anywhere between 200 - 999.99+ seconds). It may be an issue on my 3750s, but my polling intervals on my devices is several hours. I have 2950s and 6509s that don't seem to have any issue responding in a short amount of time (<20 seconds).

6 11

Re: [Observium] missing directories in observium
by Tom Laermans 17 Apr '13

17 Apr '13

Ladies and gentlemen, Adam is practicing for his commercial support idea. How would you rate this response on a scale from 1 to A++ WOULD SVN UP AGAIN? ;-) Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Adam Armstrong" <adama(a)memetic.org> To: "Observium Network Observation System" <observium(a)observium.org> Subject: [Observium] missing directories in observium Date: Wed, Apr 17, 2013 09:14 On Thu, 11 Apr 2013 19:54:09 +0000, LUKE REAGOR <LUKE.REAGOR(a)sville.us> wrote: > I just installed Observium following the instructions on > http://www.observium.org/wiki/Ubuntu_SVN_Installation and it all went on > with no problems. When I go to the url http://localhost I get the logon for > Observium. When I log on, I get the page showing the world map and > everything looks good. However, when I click on any link I get a 404 saying > it doesn't exist. Ex. when I click on Add User, I get a 404 saying > /adduser/ was not found. I look in the filesystem and don't see those > directories in /opt/observium or /opt/observium/html. Did it not get > all the directories and files from the svc? I did that part three times to > make sure. I even look in the svc > (http://www.observium.org/svn/observer/trunk) from a web browser and can't > find those directories. Hi, You're missing mod_rewrite or AllowOverride All on the directory in the Apache configuration. Thanks, adam. _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

missing directories in observium
by LUKE REAGOR 17 Apr '13

17 Apr '13

I just installed Observium following the instructions on http://www.observium.org/wiki/Ubuntu_SVN_Installation and it all went on with no problems. When I go to the url http://localhost I get the logon for Observium. When I log on, I get the page showing the world map and everything looks good. However, when I click on any link I get a 404 saying it doesn't exist. Ex. when I click on Add User, I get a 404 saying /adduser/ was not found. I look in the filesystem and don't see those directories in /opt/observium or /opt/observium/html. Did it not get all the directories and files from the svc? I did that part three times to make sure. I even look in the svc (http://www.observium.org/svn/observer/trunk) from a web browser and can't find those directories. Luke Reagor Network Administrator Stephenville ISD "I am not a teacher only a fellow traveller of whom you asked the way. I pointed ahead ahead of myself as well as of you." -George Bernard Shaw

2 1

Re: [Observium] Observium Enterprise/Pro licensing
by Adam Armstrong 16 Apr '13

16 Apr '13

For the port-based model we would likely exclude virtual ports. It would likely only exist to catch users with 8 vss and 10k ports :-) In terms of support and development, we would likely push all new feature development to the commercial version. Support and feature requests from licensees would be prioritised too. This is already the case for our existing commercial sponsor. Roughly 50% of development work is directly requested features from them. We certainly want to keep the free version usable, and we don't want to separate the code bases, as that would slow progress a lot. I think the balance between keeping everything usable and maintaining a carrot to encourage people to license will be difficult. Pricing is also difficult to decide on. If the majority of users won't pay, it will be higher than if we have more licensees. If every user paid $10, we would probably be fine. I suspect not even 5% will be willing to pay, though. Adam. "Hibler, Florian" <florian.hibler(a)kaiaglobal.com> wrote: >Hi Adam, >thanks for telling the list about your thoughts on commercializing >Observium and giving us the opportunity to talk about the licensing >scheme before you actually decide which way to go. > >I need to agree with Nikolay, that "port-based" shouldn't be the way to >go, as many devices just add tons of virtual ports. For me "host-based" >sounds pretty fair. > >Also I would prefer to use the "honor system" route as well. Keepeing >the source code open makes it still easy for people to contribute to >certain features or customize Observium for their own needs. Once a >product is commercialized you will have piracy, thats what I am pretty >sure of. Although I am pretty sure that this community will honor your >work and what you have done. Observium is a great product and it helps >me with my daily work. > >Can you already outline some pricing you have in mind and/or the >differences between free/pro/enterprise editions? Once there is money >behind that whole thing, what would actually change? How would you deal >with the support, feature requests, etc.? > >Just my 2 cent and hope it was a bit helpful! > >Best regards, >Florian > >-- >Florian Hibler >Chief Technical Officer >eMail: florian.hibler(a)kaiaglobal.com > >Kaia Global Networks Limited >Internet: http://www.kaiaglobal.com >Company No. 08257877 >Registered Office: High Wycombe, UK > >Notice: This transmittal and/or attachments may be privileged or >confidential. If you are not the intended recipient, you are hereby >notified that you have received this transmittal in error; any review, >dissemination, or copying is strictly prohibited. If you received this >transmittal in error, please notify us immediately by reply and >immediately delete this message and all its attachments. Thank you. > >On 4/15/13 24:58, Adam Armstrong wrote: >> >> Hi All, >> >> At some point in the future it's likely that I'm going to split Observium >> into free and enterprise/pro variants. >> >> Observium has historically been developed as a fairly ad hoc project, with >> work being done as time permits between work projects. We've often had gaps >> of 6 months where there has been little work done due to other commitments. >> >> As the user-base expands this is going to become less and less viable a >> way of maintaining the project, and we need to be able to devote more time >> to keeping on top of bug reports and feature development. To be able to >> devote more time to the project we need to establish a revenue stream to be >> able to support it. >> >> We'd like comments from you guys about how we should go about splitting, >> what should be in each version, and what we should charge. >> >> We're considering: >> >> A hosts/ports-based licensing scheme, where you get a certain number free, >> and any more than that requires a license. >> A feature-based licensing scheme, where higher-value features such as load >> balancers, netapp, mac accounting, vpn tracking, etc require a license. >> Licensing for customer-access, where allowing customers access to the web >> interface requires a license. >> >> What pricing models do you think would work? >> >> Options for the ent/pro version include using the honour system, >> maintaining a separate password-protected SVN repository or distributing an >> ioncube-protected version. >> >> I would prefer to go the honour system route, but I'm not sure how well >> that would work. >> >> Thanks, >> adam. >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

7 11

Re: [Observium] Observium Enterprise/Pro licensing
by Adam Armstrong 16 Apr '13

16 Apr '13

Shut up, heretic. Tom Laermans <tom.laermans(a)powersource.cx> wrote: >On Tue, 2013-04-16 at 11:58 +0200, Sebastien Guilbaud wrote: >> >> With regards to "paying members get extra rights and decent >> support", >> this is certainly the goal. BOFH-replies on the mailing list >> will stay >> for the community support though ;> >> >> >> The day Adam answers politely about nginx problems will be the sign of >> severe mental illness :-) >> > >For extra fun, add in PostgreSQL and Ruby. Maybe Lighty? > >Tom > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] webpage showing "device" path not found
by Ben .T.George 16 Apr '13

16 Apr '13

Thanks that solved. by doing some changes in virtualhost's i followed http://www.observium.org/wiki/RHEL_SVN_Installation this for installation. now my 2 servers listing under devices tab. but on the main page i am getting one "permission denied" error message with red background. Also when i click client name top right corner 4 graphs are not loading and the error message showing there is "Draw Error" regards Ben On Tue, Apr 16, 2013 at 9:56 AM, Dermot Williams <dermot(a)deadlocked.org>wrote: > Make sure you've enabled mod_rewrite (per the instructions) and that > there's a file called .htaccess in DocumentRoot. Oh, and that that file > actually has stuff in it. > > Dermot > > > On Tue, Apr 16, 2013 at 7:37 AM, Tom Laermans <tom.laermans(a)powersource.cx > > wrote: > >> Hi Ben. >> >> Again, another mail indicating you did not follow the documentation and >> the installation was not done correctly. >> >> Please reinstall Observium following ALL of the instructions as detailed >> on the web page. >> >> Tom >> >> >> On 16/04/2013 6:39, Ben .T.George wrote: >> >> HI >> >> I installed and configured observium as per the document mentioned on >> wiki . looks like everything is working and i got the web gui.I added 2 >> devices. it's showing 2 devices added and it's up.. But when i click on any >> of the hostname, it's giving the error like "404 the requested URL >> /devices/ was not found on this server >> >> I check on the html directory and the device folder is not there. How to >> fix this isse.? >> >> Thanks & Regards, >> Ben >> >> >> >> _______________________________________________ >> observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >

1 0

webpage showing "device" path not found
by Ben .T.George 16 Apr '13

16 Apr '13

HI I installed and configured observium as per the document mentioned on wiki . looks like everything is working and i got the web gui.I added 2 devices. it's showing 2 devices added and it's up.. But when i click on any of the hostname, it's giving the error like "404 the requested URL /devices/ was not found on this server I check on the html directory and the device folder is not there. How to fix this isse.? Thanks & Regards, Ben

3 2

Re: [Observium] Observium Enterprise/Pro licensing
by Adam Armstrong 15 Apr '13

15 Apr '13

I suppose and important question would be, given a realistic pricing model, how many of you would, in principle, pay for a license, and how many of you would make do with whatever remains free? Adam. Adam Armstrong <adama(a)observium.org> wrote: > >Hi All, > >At some point in the future it's likely that I'm going to split Observium >into free and enterprise/pro variants. > >Observium has historically been developed as a fairly ad hoc project, with >work being done as time permits between work projects. We've often had gaps >of 6 months where there has been little work done due to other commitments. > >As the user-base expands this is going to become less and less viable a >way of maintaining the project, and we need to be able to devote more time >to keeping on top of bug reports and feature development. To be able to >devote more time to the project we need to establish a revenue stream to be >able to support it. > >We'd like comments from you guys about how we should go about splitting, >what should be in each version, and what we should charge. > >We're considering: > >A hosts/ports-based licensing scheme, where you get a certain number free, >and any more than that requires a license. >A feature-based licensing scheme, where higher-value features such as load >balancers, netapp, mac accounting, vpn tracking, etc require a license. >Licensing for customer-access, where allowing customers access to the web >interface requires a license. > >What pricing models do you think would work? > >Options for the ent/pro version include using the honour system, >maintaining a separate password-protected SVN repository or distributing an >ioncube-protected version. > >I would prefer to go the honour system route, but I'm not sure how well >that would work. > >Thanks, >adam. >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

host adding command not completing
by Ben .T.George 15 Apr '13

15 Apr '13

HI i tried to add host , please check the below section: ./addhost.php ben.test.net any v2c Trying community any ... No reply on community any using v2c Could not reach ben.test.net with given SNMP community using v2c Trying community any ... No reply on community any using v2c Could not reach ben.test.net with given SNMP community using v2c Observium v0.13.4.3917 Add Host Tool Usage (SNMPv1/2c): ./addhost.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] Usage (SNMPv3) : Config Defaults : ./addhost.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6] No Auth, No Priv : ./addhost.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6] Auth, No Priv : ./addhost.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6] Auth, Priv : ./addhost.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|dsa] [port] [udp|udp6|tcp|tcp6] Remember to run discovery for the host afterwards. i did this setup on local machine and i want to ad this local machine as host.Is it possible to add like this.? But i am getting the above error message. it's trying to get through snmp. but in my machine snmp is running. please help me to fix this issue Thanks & Regards, Ben

2 2

Re: [Observium] adduser.php giving mysql error
by Ben .T.George 15 Apr '13

15 Apr '13

HI Thanks for the replay. i solved the issue by rerunning the DB table setup script Thanks & Regards, Ben On Sun, Apr 14, 2013 at 1:34 PM, Tom Laermans <tom.laermans(a)powersource.cx>wrote: > You don't have the database tables set up. > > > On 14/04/2013 11:35, Ben .T.George wrote: > > HI > > Thanks for the reply..i changed database variables on config.php file and > the above error got solved. > > now i am getting some other error. > > # ./adduser.php ben redhat 1 > > User ben creation failed ! > > please help me to solve this issue. > > Thanks & Regards, > Ben > > > On Sun, Apr 14, 2013 at 9:55 AM, Tom Laermans < > tom.laermans(a)powersource.cx> wrote: > >> On 14/04/2013 8:52, Kamoltorn Theppunya (Tang) wrote: >> >> >> >> It’s caused of special character in your mysql’s password. >> >> >> >> There have 2 solutions that I have solved. >> >> >> >> 1. Change you mysql password not to use character like &%*)% >> >> 2. If you don’t want to change password try to use single quote in >> password term like this >> >> >> >> ./adduser.php user ‘yourpa$$word’ 1 >> >> >> >> >> I'm having a hard time connecting solution 1 to solution 2 to the actual >> cause. >> >> - Using a different password for your Observium user makes no difference >> for the MySQL connection. >> - Special characters in your MySQL password should be no problem. >> >> The real reason: >> >> // Database config >> $config['db_host'] = "localhost"; >> $config['db_user'] = "USERNAME"; >> $config['db_pass'] = "PASSWORD"; >> $config['db_name'] = "observium"; >> >> You did not configure the database credentials correctly. (and will not >> have a database import through the sql schema updater, as it could not have >> connected to MySQL as well) >> >> Tom >> >> >> >> Best Regards. >> >> >> >> >> >> >> >> *From:* observium-bounces(a)observium.org [ >> mailto:observium-bounces@observium.org <observium-bounces(a)observium.org>] >> *On Behalf Of *Ben .T.George >> *Sent:* Sunday, April 14, 2013 1:35 PM >> *To:* observium(a)observium.org >> *Subject:* [Observium] adduser.php giving mysql error >> >> >> >> HI Mailing List >> >> >> >> i followed http://www.observium.org/wiki/RHEL_SVN_Installation this >> tutorial. >> >> when i run ./adduser.php <username> <password> 1 >> >> i am getting mysql error like below >> >> <h2> observer MySQL Error</h2> Access denied for user 'USERNAME'@'localhosr >> ' (using password: YES) >> >> for me the below mysql table creation and access giving was >> successful. I used below command >> >> mysql -u root -p >> >> <mysql root password> >> >> mysql> CREATE DATABASE observium; >> >> mysql> GRANT ALL PRIVILEGES ON observium.* TO 'observium'@'localhost' >> >> -> IDENTIFIED BY '<observium db password>'; >> >> >> >> Thanks & Regards, >> Ben >> >> >> _______________________________________________ >> observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> > > _______________________________________________ > observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > >

1 0

Re: [Observium] adduser.php giving mysql error
by Adam Armstrong 14 Apr '13

14 Apr '13

localhosr ? "Ben .T.George" <bentech4you(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] adduser.php giving mysql error
by Ben .T.George 14 Apr '13

14 Apr '13

HI Thanks for the reply..i changed database variables on config.php file and the above error got solved. now i am getting some other error. # ./adduser.php ben redhat 1 User ben creation failed ! please help me to solve this issue. Thanks & Regards, Ben On Sun, Apr 14, 2013 at 9:55 AM, Tom Laermans <tom.laermans(a)powersource.cx>wrote: > On 14/04/2013 8:52, Kamoltorn Theppunya (Tang) wrote: > > ** ** > > It’s caused of special character in your mysql’s password.**** > > ** ** > > There have 2 solutions that I have solved. **** > > ** ** > > 1. Change you mysql password not to use character like &%*)% **** > > 2. If you don’t want to change password try to use single quote in > password term like this **** > > ** ** > > ./adduser.php user ‘yourpa$$word’ 1**** > > ** ** > > > I'm having a hard time connecting solution 1 to solution 2 to the actual > cause. > > - Using a different password for your Observium user makes no difference > for the MySQL connection. > - Special characters in your MySQL password should be no problem. > > The real reason: > > // Database config > $config['db_host'] = "localhost"; > $config['db_user'] = "USERNAME"; > $config['db_pass'] = "PASSWORD"; > $config['db_name'] = "observium"; > > You did not configure the database credentials correctly. (and will not > have a database import through the sql schema updater, as it could not have > connected to MySQL as well) > > Tom > > ** ** > > Best Regards.**** > > ** ** > > ** ** > > ** ** > > *From:* observium-bounces(a)observium.org [ > mailto:observium-bounces@observium.org <observium-bounces(a)observium.org>] > *On Behalf Of *Ben .T.George > *Sent:* Sunday, April 14, 2013 1:35 PM > *To:* observium(a)observium.org > *Subject:* [Observium] adduser.php giving mysql error**** > > ** ** > > HI Mailing List > **** > > ** ** > > i followed http://www.observium.org/wiki/RHEL_SVN_Installation this > tutorial.**** > > when i run ./adduser.php <username> <password> 1 **** > > i am getting mysql error like below**** > > <h2> observer MySQL Error</h2> Access denied for user 'USERNAME'@'localhosr > ' (using password: YES) > > **** > > for me the below mysql table creation and access giving was successful. I > used below command**** > > mysql -u root -p**** > > <mysql root password>**** > > mysql> CREATE DATABASE observium;**** > > mysql> GRANT ALL PRIVILEGES ON observium.* TO 'observium'@'localhost'**** > > -> IDENTIFIED BY '<observium db password>';**** > > ** ** > > Thanks & Regards, > Ben**** > > > _______________________________________________ > observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >

2 1

Access denied to fabric graphs
by Robert Williams 14 Apr '13

14 Apr '13

Hi, Got an odd one here, suddenly we are getting access denied to all 6500/7600 fabric graphs on all devices: [cid:image001.png@01CE3697.EBD353E0] When you click on the * graph you get: [cid:image002.png@01CE3697.EBD353E0] From the URL: http://<servername>/graphs/to=1365669262/device=43/mod=1/chan=0/type=c6kxbar_util/from=1365582862/<http://%3cservername%3e/graphs/to=1365669262/device=43/mod=1/chan=0/type=c6kxbar_util/from=1365582862/> We auto SVN update, so I can’t be certain exactly when this broke, but I’m pretty sure it was ok a few days ago. I’m logged in as “admin” and have never changed (or even really looked at) the permissions page, but here is a screenshot in case I’ve failed to add something I’m meant to: [cid:image003.png@01CE3698.81307AD0] Any assistance much appreciated :) Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

1 2

adduser.php giving mysql error
by Ben .T.George 14 Apr '13

14 Apr '13

HI Mailing List i followed http://www.observium.org/wiki/RHEL_SVN_Installation this tutorial. when i run ./adduser.php <username> <password> 1 i am getting mysql error like below <h2> observer MySQL Error</h2> Access denied for user 'USERNAME'@'localhosr ' (using password: YES) for me the below mysql table creation and access giving was successful. I used below command mysql -u root -p <mysql root password> mysql> CREATE DATABASE observium; mysql> GRANT ALL PRIVILEGES ON observium.* TO 'observium'@'localhost' -> IDENTIFIED BY '<observium db password>'; Thanks & Regards, Ben <observium(a)observium.org>

3 3

Alert email nightmare!
by List User 14 Apr '13

14 Apr '13

After a recent update, I have this one device which sends me these alerts, multiple times. I've got around 250x of these over the last 2 days. Observium :: Network Observation and Monitoring Device Rebooted : bravo.redspeedservers.com 4 days, 6h 11m 40s ago. ------------------- Observium :: Network Observation and Monitoring Device:bravo.redspeedservers.com Interface: eth0 Is this a bug or something?

2 1

Re: [Observium] mac-accounting rolls over at ~100Mbit/s
by Adam Armstrong 11 Apr '13

11 Apr '13

Didnt I already fix this? Mattias Gyllenvarg <Mattias.Gyllenvarg(a)Bredband2.se> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

mac-accounting rolls over at ~100Mbit/s
by Mattias Gyllenvarg 11 Apr '13

11 Apr '13

Dear Adam I was looking at the mac-accounting feature and noticed that it never goes over ~114Mbit/s. Seem to remember that the same thing happend in cacti when using 32bit values. Device is Cisco ASR9010 RSP2. PS. Sweet project, much appreciated. -- *Med Vänliga Hälsningar - Best Regards* *Mattias Gyllenvarg* *Nätutveckling* Bredband2 Tel: +46 406219712

2 2

Re: [Observium] Cisco memory pools not being recorded
by Adam Armstrong 11 Apr '13

11 Apr '13

Already fixed, pay attention! :) Matt Hucker <matt(a)nrsolutions.com.au> wrote: >Is it broken for good, or are there plans to fix it in future? > >Matt. > >On 10/04/2013, at 4:19 PM, Nikolay Shopik wrote: > >> its recent changes broke it when new memory pool added for unix host on summary page >> >> On 10.04.2013, at 9:18, Matt Hucker <matt(a)nrsolutions.com.au> wrote: > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] Mac Address Switch Ports
by Adam Armstrong 11 Apr '13

11 Apr '13

What do you think they should report? Do you know that each port actually has a different Mac? Stefan Milo <stefan(a)zendata.dk> wrote: >they're powerconnects, not force10.... big difference. :) > >i have multiple observium installations with force10 s25n, powerconnect 6224 and lots of different cisco switches. > >on the force10 and powerconnects i see the same as you, with the same mac address on all interfaces. on my cisco devices theres different mac's on the ports. > >so it's either a bug in FTOS and Powerconnect, or it's something deep within observium. > >br > >stefan milo >________________________________________ >Fra: observium-bounces(a)observium.org [observium-bounces(a)observium.org] På vegne af Alex Vitola [alex.vitola(a)gmail.com] >Sendt: 9. april 2013 18:57 >Til: L - Observium >Emne: [Observium] Mac Address Switch Ports > >The same mac address for all port in all devices(dell 6248, force10). It's correct? > > >mysql> use observium; >Database changed >mysql> select device_id,ifDescr,ifPhysAddress from ports where device_id=5 limit 10; >+-----------+------------------------------------------+---------------+ >| device_id | ifDescr | ifPhysAddress | >+-----------+------------------------------------------+---------------+ >| 5 | Unit: 1 Slot: 0 Port: 1 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 2 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 3 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 4 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 5 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 6 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 7 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 8 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 9 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 10 Gigabit - Level | 5c260adb03da | >+-----------+------------------------------------------+---------------+ >10 rows in set (0.00 sec) > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

5 10

Mac Address Switch Ports
by Alex Vitola 09 Apr '13

09 Apr '13

3 2

Re: [Observium] Mac Address Switch Ports
by Adam Armstrong 09 Apr '13

09 Apr '13

This is common on some switch types. :) Tom Laermans <tom.laermans(a)powersource.cx> wrote: >Hi Alex, > >Looks like my Dell 6248s are reporting the same. All other devices have >different ones, it may be a bug in the dell firmware but not in >Observium :) > >Tom > >On Tue, 2013-04-09 at 13:57 -0300, Alex Vitola wrote: >> The same mac address for all port in all devices(dell 6248, force10). >> It's correct? >> >> >> >> >> mysql> use observium; >> Database changed >> mysql> select device_id,ifDescr,ifPhysAddress from ports where >> device_id=5 limit 10; >> +-----------+------------------------------------------+---------------+ >> | device_id | ifDescr | ifPhysAddress >> | >> +-----------+------------------------------------------+---------------+ >> | 5 | Unit: 1 Slot: 0 Port: 1 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 2 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 3 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 4 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 5 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 6 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 7 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 8 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 9 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 10 Gigabit - Level | 5c260adb03da >> | >> +-----------+------------------------------------------+---------------+ >> 10 rows in set (0.00 sec) >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] bug at html/includes/graphs/generic_multi_line.inc.php
by Adam Armstrong 08 Apr '13

08 Apr '13

When I remember... :D Ciro Iriarte <cyruspy(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

bug at html/includes/graphs/generic_multi_line.inc.php
by andres fariña 08 Apr '13

08 Apr '13

Hi all, I´ve found a bug at html/includes/graphs/generic_multi_line.inc.php with wrong order of data shown as Avg, Min, Max at graph. Here is the fix --- /opt/observium-wks/html/includes/graphs/generic_multi_line.inc.php 2013-03-12 15:44:22.000000000 -0300 +++ html/includes/graphs/generic_multi_line.inc.php 2013-04-03 18:03:27.000000000 -0400 @@ -71,9 +71,9 @@ foreach ($rrd_list as $i => $rrd) } if(in_array("lst", $data_show)) { $rrd_optionsb .= " GPRINT:".$id.":LAST:%6.1lf%s"; } + if(in_array("avg", $data_show)) { $rrd_optionsb .= " GPRINT:".$id.":AVERAGE:%6.1lf%s"; } if(in_array("min", $data_show)) { $rrd_optionsb .= " GPRINT:".$id."min:MIN:%6.1lf%s"; } if(in_array("max", $data_show)) { $rrd_optionsb .= " GPRINT:".$id."max:MAX:%6.1lf%s"; } - if(in_array("avg", $data_show)) { $rrd_optionsb .= " GPRINT:".$id.":AVERAGE:%6.1lf%s"; } $rrd_optionsb .= " COMMENT:'\\l'"; $iter++; And the result: Before After Could someone help commiting this? Regards, Edgar

1 0

Pagination issue
by Michael Robbert 08 Apr '13

08 Apr '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I just noticed in our instance of Observium if we load the "Ports -> All ports" page it has a pagination selector at the top, but it appears to be showing all ports on one page rather than the 100 that appears to be the default. This was producing 500 errors until I increased the PHP memory to 1024M. Now it is grinding the browser to a crawl. Should this or could this page load only the first 100 entries by default? We have a similar problem with the inventory page, but it doesn't appear to have pagination enabled. I'd like to request that has an enhancement unless it is supposed to already be there and my instance is just messed up. Thanks, Mike Robbert -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.19 (Darwin) Comment: GPGTools - http://gpgtools.org iQEcBAEBAgAGBQJRXwjlAAoJEFmgPOBxQDtBGcIH+gMhDl6bNdpGytWFwv6jdgYW ZCACXyi3ikvSyY+JM/FtvO94SVeP1htUWdl9bUqQfI8tdKJL9AgkK9KGHmF08KZe Elb4W8TrSxWaodtG0gDO+rFFf+lPRYWsli4AT+rmEhoJ3mpxRDVBEiA/Z/5+h1qd fVPo3Q+yRHBC9HOE3OLC3wcbsIJywxGyS8uEFPW4nPC/Cbt/em1fEVppMi6wsGZZ Sl2S+CZr2Tgf9+L/LmOaAsRDqrvfyqsFiTu22JMj9KRffPNF+y+32C3R27+xTlua hGkJ7I7ArEw1a5GgUwQWC68jqaKcTQXJAtO5EhY8qaL/MCtDQgrrww1SCHefqTs= =oI/I -----END PGP SIGNATURE-----

2 2

Re: [Observium] Graphs don't show
by Adam Armstrong 08 Apr '13

08 Apr '13

Screenshots? Bart Teunis <bteunis(a)a2b-internet.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Graphs don't show
by Bart Teunis 08 Apr '13

08 Apr '13

Hi All, At the moment I have an issue that some of my graphs dont show well and something in the overusage calculation as well. - I see no graph for overusage - I see no correct overusage. According to my system a client is using 2,58 Mbps (1 allowed) and the overusage is 2,58 Mbps as well. Is this a familiar issue ? Regards, Bart Teunis Bart Teunis | A2B Internet BV | +31 299 707 115 ( Office ) | +31 6 57 88 48 47 ( Dutch cell ) | <mailto:bteunis@a2b-internet.com> bteunis(a)a2b-internet.com |

1 0

Observium Session Timeout
by Saulo Zimbaro 08 Apr '13

08 Apr '13

It´s possible to change session timeout ? Prompt me log in screen frequently. thks, -- *Saulo Zimbaro* Mobile ) (+55) 21 9800-0100 *saulozimbaro(a)gmail.com *saulo(a)zimbaro.com

1 0

Re: [Observium] Asterisk SNMP support
by Adam Armstrong 07 Apr '13

07 Apr '13

Yes. Though if you can give me access to your dev install I can fix up the graphs and stuff before I commit it. I can't easily test things I don't have :) Adam Pieter De Wit <pieter(a)insync.za.net> wrote: >On 7/04/2013 21:02, Adam Armstrong wrote: >> I might have remembered wrong. There is as graphs array populated by modules which defines things in the graphs tab. >> >> The ucd modules do this. >> >> The graph defs are a huge section in either defaults.inc.php or definitions.inc.php. >> >> I forget, and not at a computer at the moment :-) >> >> Pieter De Wit <pieter(a)insync.za.net> wrote: >> >> >Hey Adam, > >I finally got the graphs drawn etc. (some of them at least) but the >graphs are showing "device*asterisk_iax2" below the title - any ideas on >what I missed ? > >Also, how would I send you the "patch" just as a SVN diff and attach the >new files ? > >Thanks, > >Pieter >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] Asterisk SNMP support
by Adam Armstrong 07 Apr '13

07 Apr '13

I might have remembered wrong. There is as graphs array populated by modules which defines things in the graphs tab. The ucd modules do this. The graph defs are a huge section in either defaults.inc.php or definitions.inc.php. I forget, and not at a computer at the moment :-) Pieter De Wit <pieter(a)insync.za.net> wrote: >On 7/04/2013 18:48, Adam Armstrong wrote: >> Drop it into an rrd and add in entry into $graps_enabled matching the graph type which will draw it. >> >> You also need a graph type def in definitions. >> >> Adam. >> >> ><snip> > >Hey Adam, > >I'm sorry - but I don't see where I do the definitions and the adding of >entries in graph_enabled (or graphs_enabled - which I can't find :( ) > >Thanks, > >Pieter >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] Asterisk SNMP support
by Adam Armstrong 07 Apr '13

07 Apr '13

Drop it into an rrd and add in entry into $graps_enabled matching the graph type which will draw it. You also need a graph type def in definitions. Adam. Pieter De Wit <pieter(a)insync.za.net> wrote: >On 7/04/2013 09:50, Tom Laermans wrote: >> On 6/04/2013 23:02, Pieter De Wit wrote: >>> <snip> >>> >>> I can give you access to the box via SNMP or a dump of the OID's >>> (it's small) if you want to have a look. >>> >>> I pastebin'ed it: >>> http://pastebin.com/nCyzbV44 >> Are you sure you mean what you say when you say that >> >> > It's not really a hack though, it's enabling SNMP in Asterisk. The >> agent will have to fetch the data from Asterisk and, imho, it's going >> to be more complicated code (Talking to Asterisk via CLI or AMI is a >> pain to get this type of data) >> >> I see pretty much no useful info in their MIB, and this dump confirms it. >> >> Number of active calls seems to be the only graphable output. >> >> Tom >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >Hey Tom, > >Yip - I am sure :) I have written am AMI and it's painful. As for the >enabling SNMP part, there is 4 lines of config to add, 2 to Asterisk and >2 to snmpd.conf. I am happy to maintain the wiki page on this. > >The only thing I want is, as you say, the number of active calls. There >is nothing else in the dump, nor anything else that I can think of that >is useful. > >The way I see this playing out that we will have 12 graphs, one per >channel type of the active number of calls. The other "usefull" info is >the "enabled" features, like transfer, but I am not sure how we going to >display that. For "version 1" I think we stick to the number of channels. > >Now I just need to figure out how to get this into the DB and then I >will work on the poller includes. > >Cheers, > >Pieter >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Asterisk SNMP support
by Pieter De Wit 07 Apr '13

07 Apr '13

Hi Guys, Do you guys know if there is plans to support Asterisk monitoring via SNMP in the near future ? Cheers, Pieter

3 10

pixeled cef screen
by Donald T. Currie 04 Apr '13

04 Apr '13

[cid:image001.png@01CE3127.3C8F8F90] [cid:image002.png@01CE3127.3C8F8F90]

2 1

LDAP Configuration
by Michael Sweikata 02 Apr '13

02 Apr '13

Hey everyone; Answers so far have been wonderful. I've been pouring through the archives trying to find a good example for LDAP Authentication, and I believe I have the authentication portion working correctly, however security permissions in Observium aren't working correctly. If I provide the correct credentials, it lets me through but the main page has no content. If I provide incorrect credentials, it spits me back out to the login page. The structure of the containers is correct, the AD Security Group 'Network Ops' is the group our Network Management team uses, so I want us to have full access (level 10), and is located in (Canonical name): hh.nku.edu/NKU/HH/Groups/Security/Network Ops I've tried it with 'Domain Users' instead of 'Network Ops' but no dice there either. And yes, I have double-checked that my account is a member of the 'Network Ops' group, I didn't get fired today. My level 7 and level 1 groups have been commented out just to try and simplify any issues. My config.php (relevant portions) look like: // Authentication Model #Required LDAP Settings $config['auth_mechanism'] = "ldap"; $config['auth_ldap_version'] = 3; $config['auth_ldap_server'] = "nkuserv1.hh.nku.edu"; $config['auth_ldap_port'] = 389; $config['auth_ldap_starttls'] = "false"; #User Account $config['auth_ldap_prefix'] = "cn="; $config['auth_ldap_suffix'] = ",OU=Faculty_Staff,OU=Users,OU=HH,OU=NKU,DC=hh,DC=nku,DC=edu"; #Required Group Membership $config['auth_ldap_group'] = "cn=Network Ops,OU=Security,OU=Groups,OU=HH,OU=NKU,dc=hh,dc=nku,dc=edu"; $config['auth_ldap_groupbase'] = "ou=Security,ou=Groups,ou=hh,ou=nku,dc=hh,dc=nku,dc=edu"; #Optional LDAP Settings $config['auth_ldap_groups']['Network Ops']['level'] = 10; #$config['auth_ldap_groups']['Domain Admins']['level'] = 7; #$config['auth_ldap_groups']['Lab Admins']['level'] = 1; So, if anyone has any ideas or can help with this, it'd be greatly appreciated.

1 0

Re: [Observium] False "device rebooted" message
by Adam Armstrong 02 Apr '13

02 Apr '13

All counters. But we can't guarantee any of them exist at that point in the poller, or that they were ever greater than zero. Adam. Morgan McLean <wrx230(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] False "device rebooted" message
by Adam Armstrong 02 Apr '13

02 Apr '13

It comes from SNMP. What does the uptime graph show? Stefano Lobrano <stefano.lobrano(a)staff.aruba.it> wrote: >Hello List, >I'm testing observium to monitor network devices in our datacenter, I've >added a range of different devices and it seems all good, but today it >has given me a false notice about a couple of nexus 5000 that are >reported as "rebooted" while the switches are correctly reporting uptime >of more than 600 days... >All the other hosts are reported without errors, apparently. > >I've looked in the mailing list archive and I found similar issues, with >server, but I understand that was something resolved. > >Where does observium takes the info about reboot? > >Observium is installed in a VM: >Observium 0.13.3.3824 >Apache 2.2.22 (Ubuntu) >PHP 5.3.10-1ubuntu3.6 >MySQL 5.5.29-0ubuntu0.12.04.2 >RRDtool 1.4.7 > >Thanks, >Stefano >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 8

observium alert not working
by Abul Bashar Azad 02 Apr '13

02 Apr '13

Hi Observium Team, BDCOM is one of the big ISP and IP Telephony Service provider in Bangladesh I am deploy it in my IP Telephony network. I am follow your documentation step by step. I am add host and view all the graph its working fine. But I can not see any alert message. I am configure it but its not working. Could you please help me how can i get specific alert like my ram memory 75% use, Processor 60% use. I need customised alert to monitor my netwrok device properly . I am wating for your valuable feedback. -- With regards --- Md. Abul Bashar Azad Assistant Manager, IPTSP *BDCOM Online Limited* IP Phone : 09666333666 Cell: +8801818301627

2 2

Re: [Observium] Observium Storage Requirements
by Tom Laermans 01 Apr '13

01 Apr '13

Next to the rrd requirements, you may want to put some pruning in place for the eventlog and syslog tables. Size of storage per device depends on what is monitored on it. But as said in other answers the data files itself do not expand. Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Michael Sweikata" <sweikatam1(a)nku.edu> To: "observium(a)observium.org" <observium(a)observium.org> Subject: [Observium] Observium Storage Requirements Date: Mon, Apr 1, 2013 16:51 Hey everyone; I mentioned in a previous e-mail that we’re rolling out a deployment of Observium, and we absolutely love the product. I know that it’s designed as a historical data gathering tool, but I am concerned about the storage requirements for the system. I have approximately 600 routers and switches on my campus, and eventually would like to get my servers involved (pushing the device count beyond two-thousand), and I’m concerned at the storage requirements for this. I couldn’t find this information anywhere online, so I figured I would check with you guys. Does Observium have any kind of roll-over archiving for device history beyond a certain point, or will it continually just grow the data in the files?

2 1

Re: [Observium] Observium Storage Requirements
by Adam Armstrong 01 Apr '13

01 Apr '13

Observium uses red, which is fixed size round robin database. You can find information about how it works online. Perhaps we should document this too. Data usage for a single host shouldn't grow over time, except event log entries and the like. For an installation of that size you might want to use ssd or solid state ram drives. Spindles just won't survive the I/o load. Adam. Michael Sweikata <sweikatam1(a)nku.edu> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Observium Storage Requirements
by Michael Sweikata 01 Apr '13

01 Apr '13

Hey everyone; I mentioned in a previous e-mail that we're rolling out a deployment of Observium, and we absolutely love the product. I know that it's designed as a historical data gathering tool, but I am concerned about the storage requirements for the system. I have approximately 600 routers and switches on my campus, and eventually would like to get my servers involved (pushing the device count beyond two-thousand), and I'm concerned at the storage requirements for this. I couldn't find this information anywhere online, so I figured I would check with you guys. Does Observium have any kind of roll-over archiving for device history beyond a certain point, or will it continually just grow the data in the files?

2 1

Re: [Observium] only interface counters wrapped
by Adam Armstrong 01 Apr '13

01 Apr '13

Interface counters update much quicker. Probably 500 times quicker than even packets in net stats. But it is perhaps related to old missed data problem. :( Adam Nikolay Shopik <shopik(a)inblock.ru> wrote: >Hey, > >So I just wondering is this normal when some of your counters wrapped >(huge peak) while others are perfectly normal? > >I have device running for 1 years, 103 days, and only interface graph >are wrapped while netstat are just perfectly fine. > >snmpwalk seems report that HC counters supported, device running 12.3 IOS. >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

only interface counters wrapped
by Nikolay Shopik 01 Apr '13

01 Apr '13

Hey, So I just wondering is this normal when some of your counters wrapped (huge peak) while others are perfectly normal? I have device running for 1 years, 103 days, and only interface graph are wrapped while netstat are just perfectly fine. snmpwalk seems report that HC counters supported, device running 12.3 IOS.

1 0

False "device rebooted" message
by Stefano Lobrano 31 Mar '13

31 Mar '13

Hello List, I'm testing observium to monitor network devices in our datacenter, I've added a range of different devices and it seems all good, but today it has given me a false notice about a couple of nexus 5000 that are reported as "rebooted" while the switches are correctly reporting uptime of more than 600 days... All the other hosts are reported without errors, apparently. I've looked in the mailing list archive and I found similar issues, with server, but I understand that was something resolved. Where does observium takes the info about reboot? Observium is installed in a VM: Observium 0.13.3.3824 Apache 2.2.22 (Ubuntu) PHP 5.3.10-1ubuntu3.6 MySQL 5.5.29-0ubuntu0.12.04.2 RRDtool 1.4.7 Thanks, Stefano

3 2

IPMI issues
by List User 31 Mar '13

31 Mar '13

Hey guys, Its me, again. This time I'm wondering what's up with the IPMI feature? I gave my IPMI a hostname in /etc/hosts and set the proper username and password, and it's not showing any data like CPU temperatures.I have a feeling its not even polling anything from the IPMI. I have the Module called ipmi enabled on global and the device itself. The FAQ didn't seem to provide any info related to IPMI usage. Thanks.

5 10

Re: [Observium] Observium png files
by Adam Armstrong 28 Mar '13

28 Mar '13

PNG files are created in /tmp Dean Kamali <dean.kamali(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Observium png files
by Winston Shaw 28 Mar '13

28 Mar '13

Hello, I can see that png files are being created in the /tmp directory. However the rrdtool graph command is trying to access non-existent png files. The result is no graphs being displayed. Is this related to the strgen function ? Is my system somehow converting the random names of the png files to another name.png ? non-programmer.

2 1

Re: [Observium] Observium png files
by Adam Armstrong 28 Mar '13

28 Mar '13

Nope. The file is deleted after it is accessed, so you never knew it was there. There is a bug which doesn't delete them sometimes, which is why you see them. You probably need to reinstall and follow the install guide properly on a supported platform. Adam. Winston Shaw <wvswinnie(a)excite.com> wrote: >Hello, > >I can see that png files are being created in the /tmp directory. However the >rrdtool graph command is trying to access non-existent png files. The result is >no graphs being displayed. Is this related to the strgen function ? Is my system >somehow converting the random names of the png files to another name.png ? > >non-programmer. > > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Traffic billing
by orznew orznew 28 Mar '13

28 Mar '13

I'm following the instructions listed in this website, http://www.observium.org/wiki/Billing#Configure_a_Bill. Is there anything that I"m actually missing? Thank you. On Wed, Mar 27, 2013 at 7:50 PM, Andreas Bergman <andreas(a)sea-ab.se> wrote: > We're successfully polling both switches and servers and getting the data > we need. > > Switches: Dell Powerconnects > Servers: Dellserver running Ubuntu 12.04 and snmpd. > > /Andreas > > > -----Original Message----- > From: "Niclas Tollgård" <niclas.tollgard(a)apicasystem.com> > Sent 3/27/2013 12:46:15 PM > To: "Observium Network Observation System" <observium(a)observium.org> > Subject: Re: [Observium] Traffic billing > > I have the same problem....but not on all nodes. > > Where I poll switches or routers is works ok. When I poll servers (Debian Linux or VMWare) it doesn't work and my graphs looks the same as the attached picture. > > / Nic > > -----Original Message----- > From: observium-bounces(a)observium.org [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans > Sent: den 27 mars 2013 11:40 > To: observium(a)observium.org > Subject: Re: [Observium] Traffic billing > > Are you running the billing poller? > > On Wed, 2013-03-27 at 17:22 +0800, orznew orznew wrote: > > Hi there, > > > > > > I've configured the traffic billing for my observium and configured > > the bill to bill a port. But the statistics shows 0mbps used. I've > > configured it to monitor the 95th percentile. can I please get some > > help in this? I need to monitor how much I will have to pay my > > upstream for every month. > > > > > > Thank you. > > _______________________________________________ > > observium mailing list > > observium(a)observium.org > > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > _______________________________________________ > observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium > _______________________________________________ > observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > �� > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >

1 0

Re: [Observium] IPMI issues
by Adam Armstrong 28 Mar '13

28 Mar '13

Tom will know, but he'll be asleep now. He does the ipmi code. List User <list(a)redspeedservers.com> wrote: >Hey guys, > >Its me, again. This time I'm wondering what's up with the IPMI feature? >I gave my IPMI a hostname in /etc/hosts and set the proper username and >password, and it's not showing any data like CPU temperatures.I have a >feeling its not even polling anything from the IPMI. I have the Module >called ipmi enabled on global and the device itself. The FAQ didn't seem >to provide any info related to IPMI usage. > >Thanks. >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Issues with port alerts.
by Adam Armstrong 28 Mar '13

28 Mar '13

Hehe. They wanted it as a 6 month stop-gap before their final solution was in place. I suppose they got the final solution in first! They were going to pay 2k. I though that was a little expensive, but it was what they offered :-) Adam. List User <list(a)redspeedservers.com> wrote: >I don't know. I mean you could live without if you have the Ports page >on auto-refresh, but after about 10 ports, it won't fit on the page. I >mean the amount depends on the person doing it and how much he thinks >his/her time is worth. Then there is also the fact, if Peer1 dropped it, >it must of been an extreme toll on their budget... > >. >. > >On 3/27/2013 5:24 PM, Adam Armstrong wrote: >> >> How much is it worth? :) >> >> adam. >> >> >> On Wed, 27 Mar 2013 17:50:47 -0400, List User <list(a)redspeedservers.com> >> wrote: >>> How much would it cost to sponsor its addition? >>> >>> On 3/27/2013 5:38 PM, Adam Armstrong wrote: >>>> Peer1 were going to sponsor its addition, but changed their mind. >>>> >>>> :) >>>> >>>> List User <list(a)redspeedservers.com> wrote: >>>> >>>>> Is there anyway to get his added or anyone who can do it? >>>>> It would be a very headache saving feature for us. >>>>> >>>>> Thank you. >>>>> >>>>> On 3/27/2013 2:48 AM, Adam Armstrong wrote: >>>>>> There is, but not per-port. >>>>>> >>>>>> adam. >>>>>> >>>>>> On Wed, 27 Mar 2013 08:45:17 +0100, Tom Laermans >>>>>> <tom.laermans(a)powersource.cx> wrote: >>>>>>> Are you sure there's no code in place for a % threshold in the >> poller >>>>>>> code? I thought there was... >>>>>>> >>>>>>> Tom >>>>>>> >>>>>>> On 27/03/2013 7:42, Adam Armstrong wrote: >>>>>>>> These UI elements don't function. They were only there as >>>>>>>> placeholders. >>>>>>>> >>>>>>>> I've removed them for now :) >>>>>>>> >>>>>>>> adam. >>>>>>>> >>>>>>>> >>>>>>>> On Tue, 26 Mar 2013 20:09:39 -0400, List User >>>>>> <list(a)redspeedservers.com> >>>>>>>> wrote: >>>>>>>>> Hi there, >>>>>>>>> >>>>>>>>> I am a new user to Observium and seem to be having an issue with >> the >>>>>>>>> options for "Ports" on a device. I currently have 2 devices hooked >>>>>>>>> up, >>>>>>>>> working fine. The problem is when I edit the device and go to edit >>>>>>>>> the >>>>>>>>> Threshold and PPS settings, they never save. I tried both the Save >>>>>>>>> and >>>>>>>>> Save changes button. >>>>>>>>> >>>>>>>>> I used this guide to install Observium >>>>>>>>> (http://www.observium.org/wiki/Ubuntu_SVN_Installation). The only >> I >>>>>>>>> changed was instead of doing addhost in the command line, I did it >>>>>>>>> on >>>>>>>>> the website instead. Other then that, I didn't touch anything >> else. >>>>>> The >>>>>>>>> server is dedicated to Observium and is running Ubuntu 12.10 >>>>>>>>> (32bit). >>>>>>>>> >>>>>>>>> I noticed the FAQ had an entry which seemed related >>>>>>>>> >> (http://www.observium.org/wiki/FAQ#When_submitting_large_forms_such_as_port_…) >>>>>>>>> but I didn't find that error in my PHP error logs. Can anyone >> point >>>>>>>>> me >>>>>>>>> in the right direction? >>>>>>>>> >>>>>>>>> Thank you. >>>>>>>>> >>>>>>>>> PS. Sorry if this was brought up before, I also checked via >> Google, >>>>>> but >>>>>>>>> it didn't show any relevant results. >>>>>>>>> _______________________________________________ >>>>>>>>> observium mailing list >>>>>>>>> observium(a)observium.org >>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>> _______________________________________________ >>>>>>>> observium mailing list >>>>>>>> observium(a)observium.org >>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>> _______________________________________________ >>>>>>> observium mailing list >>>>>>> observium(a)observium.org >>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>> _______________________________________________ >>>>>> observium mailing list >>>>>> observium(a)observium.org >>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>> _______________________________________________ >>>>> observium mailing list >>>>> observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Issues with port alerts.
by Adam Armstrong 28 Mar '13

28 Mar '13

Peer1 were going to sponsor its addition, but changed their mind. :) List User <list(a)redspeedservers.com> wrote: >Is there anyway to get his added or anyone who can do it? >It would be a very headache saving feature for us. > >Thank you. > >On 3/27/2013 2:48 AM, Adam Armstrong wrote: >> There is, but not per-port. >> >> adam. >> >> On Wed, 27 Mar 2013 08:45:17 +0100, Tom Laermans >> <tom.laermans(a)powersource.cx> wrote: >>> Are you sure there's no code in place for a % threshold in the poller >>> code? I thought there was... >>> >>> Tom >>> >>> On 27/03/2013 7:42, Adam Armstrong wrote: >>>> These UI elements don't function. They were only there as placeholders. >>>> >>>> I've removed them for now :) >>>> >>>> adam. >>>> >>>> >>>> On Tue, 26 Mar 2013 20:09:39 -0400, List User >> <list(a)redspeedservers.com> >>>> wrote: >>>>> Hi there, >>>>> >>>>> I am a new user to Observium and seem to be having an issue with the >>>>> options for "Ports" on a device. I currently have 2 devices hooked up, >>>>> working fine. The problem is when I edit the device and go to edit the >>>>> Threshold and PPS settings, they never save. I tried both the Save and >>>>> Save changes button. >>>>> >>>>> I used this guide to install Observium >>>>> (http://www.observium.org/wiki/Ubuntu_SVN_Installation). The only I >>>>> changed was instead of doing addhost in the command line, I did it on >>>>> the website instead. Other then that, I didn't touch anything else. >> The >>>>> server is dedicated to Observium and is running Ubuntu 12.10 (32bit). >>>>> >>>>> I noticed the FAQ had an entry which seemed related >>>>> >> (http://www.observium.org/wiki/FAQ#When_submitting_large_forms_such_as_port_…) >>>>> but I didn't find that error in my PHP error logs. Can anyone point me >>>>> in the right direction? >>>>> >>>>> Thank you. >>>>> >>>>> PS. Sorry if this was brought up before, I also checked via Google, >> but >>>>> it didn't show any relevant results. >>>>> _______________________________________________ >>>>> observium mailing list >>>>> observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 3

Re: [Observium] New install of Observium; fails to add device
by Michael Sweikata 27 Mar '13

27 Mar '13

Sorry for the formatting issue, I had my mailing list set to bulk distributions, which I've changed, so I'm not replying to the latest messages. Okay, I'm not sure what the hell, but once I loaded up the net-snmp-utils it worked fine. So I'm assuming that some of the packages didn't load correctly. I'll re-install all of them just to see what happens. Thanks for the quick response Adam and Dean!

2 2

Issues with port alerts.
by List User 27 Mar '13

27 Mar '13

Hi there, I am a new user to Observium and seem to be having an issue with the options for "Ports" on a device. I currently have 2 devices hooked up, working fine. The problem is when I edit the device and go to edit the Threshold and PPS settings, they never save. I tried both the Save and Save changes button. I used this guide to install Observium (http://www.observium.org/wiki/Ubuntu_SVN_Installation). The only I changed was instead of doing addhost in the command line, I did it on the website instead. Other then that, I didn't touch anything else. The server is dedicated to Observium and is running Ubuntu 12.10 (32bit). I noticed the FAQ had an entry which seemed related (http://www.observium.org/wiki/FAQ#When_submitting_large_forms_such_as_port_…) but I didn't find that error in my PHP error logs. Can anyone point me in the right direction? Thank you. PS. Sorry if this was brought up before, I also checked via Google, but it didn't show any relevant results.

3 4

New install of Observium; fails to add device
by Michael Sweikata 27 Mar '13

27 Mar '13

Hey Everyone; I'm trying out a brand new install of Observium, I really like the product and would love to set it up in my production environment. I have followed the installation guide for Red Hat 6 x64 on a virtual machine, however, when I attempt to add a router (Cisco 6509 using Advanced IP Services 12.2(33)), it fails to add: ./addhost.php routerDNSName observium Trying community observium ... No reply on community observium using v2c Could not reach routerDNSName with given SNMP community using v2c Trying v3 parameters observium/noAuthNoPriv ... No reply on credentials observium/noAuthNoPriv using v3 Could not reach routerDNSName with given SNMP community using v3 Trying community observium ... No reply on community observium using v1 Could not reach routerDNSName with given SNMP community using v1 Trying community observium ... No reply on community observium using v2c Could not reach routerDNSName with given SNMP community using v2c Trying v3 parameters observium/noAuthNoPriv ... No reply on credentials observium/noAuthNoPriv using v3 Could not reach routerDNSName with given SNMP community using v3 Trying community observium ... No reply on community observium using v1 Could not reach routerDNSName with given SNMP community using v1 On the 6509, I have input the commands listed on the wiki: routerName#sh run | i snmp snmp-server community observium RO SNMPv4 snmp-server ifindex persist snmp-server location routerLocation snmp-server contact Michael Sweikata snmp ifmib ifindex persist routerName#sh ip access-list SNMPv4 Standard IP access list SNMPv4 10 permit 10.2.48.130 log The DNS name does resolve correctly, and there are no firewalls or access-restrictions on those two devices talking. I've not worked with SNMP much before, but I can say that this device did run SNMP correctly, as Ciscoworks is able to detect issues, and it is listening on UDP/161. Any help for troubleshooting this would be appreciated.

3 2

Re: [Observium] Traffic billing
by Andreas Bergman 27 Mar '13

27 Mar '13

We're successfully polling both switches and servers and getting the data we need. Switches: Dell Powerconnects Servers: Dellserver running Ubuntu 12.04 and snmpd. /Andreas -----Original Message----- From: "Niclas Tollgård" <niclas.tollgard(a)apicasystem.com> Sent 3/27/2013 12:46:15 PM To: "Observium Network Observation System" <observium(a)observium.org> Subject: Re: [Observium] Traffic billing I have the same problem....but not on all nodes. Where I poll switches or routers is works ok. When I poll servers (Debian Linux or VMWare) it doesn't work and my graphs looks the same as the attached picture. / Nic -----Original Message----- From: observium-bounces(a)observium.org [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: den 27 mars 2013 11:40 To: observium(a)observium.org Subject: Re: [Observium] Traffic billing Are you running the billing poller? On Wed, 2013-03-27 at 17:22 +0800, orznew orznew wrote: > Hi there, > > > I've configured the traffic billing for my observium and configured > the bill to bill a port. But the statistics shows 0mbps used. I've > configured it to monitor the 95th percentile. can I please get some > help in this? I need to monitor how much I will have to pay my > upstream for every month. > > > Thank you. > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ��

1 0

Traffic billing
by orznew orznew 27 Mar '13

27 Mar '13

Hi there, I've configured the traffic billing for my observium and configured the bill to bill a port. But the statistics shows 0mbps used. I've configured it to monitor the 95th percentile. can I please get some help in this? I need to monitor how much I will have to pay my upstream for every month. Thank you.

3 2

Fwd: [Observium-dev] r3775 - observer/trunk/includes/discovery/os
by Paul Gear 27 Mar '13

27 Mar '13

Hi Tom, A few Comware-based HP switches have been detected as ProCurve recently as well. I think it's due to bone-headed changes by HP in the sysDescr string they're returning (because, contrary to your commit message, everything HP Networking must be ProCurve-branded :-). If i grab some snmpwalk results, do you need any particular flags, or is just the content of the string enough? Regards, Paul

2 3

Re: [Observium] Observium and MariaDB support
by Adam Armstrong 27 Mar '13

27 Mar '13

Mariadb is a drop-in replacement for mysql. No special support is required. Adam. Bart Teunis <bteunis(a)a2b-internet.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Observium and MariaDB support
by Bart Teunis 27 Mar '13

27 Mar '13

Hello, It seems that more and more Linux Distros are stepping out on MySQL and replace MySQL with MariaDB. The reason for this is that they dont have a good feeling about the plans that Oracle has with MySQL .. So my question is, is there a roadmap for observium regarding a migration towards MariaDB? Regards, Bart Teunis Bart Teunis | A2B Internet BV | +31 299 707 115 ( Office ) | +31 6 57 88 48 47 ( Dutch cell ) | <mailto:bteunis@a2b-internet.com> bteunis(a)a2b-internet.com |

2 1

Custom graph at observium
by andres fariña 27 Mar '13

27 Mar '13

Hi all, Currently I have many custom applications graphs with Cacti and I really want to use Observium for this. Is there any procedure with a little example to graph from scratch? I will really appreciate. Regards, Andres

4 8

graphs kind of showing
by Dean Kamali 26 Mar '13

26 Mar '13

Wondering if some one could help, the graphs are getting created, but its kind of showing in the UI, please find the attached image for example. Environment (ubuntu 12.4) PHP 5.3.10-1 rrdtool 1.4.7-1 My cron is setup correctly, and its running without any issues. Any ideas what could be wrong? Thanks

2 2

Juniper SSG CPU
by Adam Summerfield 26 Mar '13

26 Mar '13

We constantly see the CPU being removed and added.... 2013-03-26 00:47:51 srdcz2-fw-01 System Processor added: type juniperive index 1 descr CPU Utilization 2013-03-26 00:47:51 srdcz2-fw-01 System Processor added: type screenos index 1 descr Processor 2013-03-26 00:47:49 srdcz1-fw-01 System Processor added: type juniperive index 1 descr CPU Utilization 2013-03-26 00:47:49 srdcz1-fw-01 System Processor added: type screenos index 1 descr Processor 2013-03-26 06:47:56 srdcz2-fw-01 System Processor removed: type juniperive index 1 descr CPU Utilization 2013-03-26 06:47:56 srdcz2-fw-01 System Processor removed: type screenos index 1 descr Processor 2013-03-26 06:47:54 srdcz1-fw-01 System Processor removed: type juniperive index 1 descr CPU Utilization 2013-03-26 06:47:54 srdcz1-fw-01 System Processor removed: type screenos index 1 descr Processor I have tried modifying SNMP timeouts and retries and have had no success... [timeout] => 10 [retries] => 5 Regards, Adam

1 1

browsable archives and (sub)domains in hostnames
by Andreas Rüdel 25 Mar '13

25 Mar '13

Hi, Observium 1) I wonder: is there a searchable version of the mailing list archives somewhere? 2) I need some hint where I can change the behaviour of observium to cut avay domains after the first dot - we used subdomains to segment our hardware so now all devices are called the same on the overview screen. (alarms / events) Example: switch1.site1.country1 switch1.site2.country1 switch1.site1.country2 and so on.. (I know it's boring but we ran out of elven names at one point...) ;) on the overview page they would all be called "switch1" when I go to "devices" everything is just fine can this be changed somewhere? could not find in config.php and don't dare editing the other files thanks! Andreas

9 12

[patch] Add Support for Gnodal devices
by james.adams＠stfc.ac.uk 22 Mar '13

22 Mar '13

Hi Adam et al, The attached tarball contains initial support for Gnodal switches, enjoy! Cheers, James -- Scanned by iCritical.

1 0

Observium Virtual Machines wrong OS Version
by observium＠velder.li 22 Mar '13

22 Mar '13

Hi there In the virtual machine overview (ESXi Host..), the os version is not correct. I added the VM to observium, when squeeze 6.0.6 was installed. Now it is 6.0.7 (since a few weeks) but observium still says 6.0.6. Is that a bug? Regards, Patrick

1 0

DELL metered PDU - supported? in planning?
by Mihai - Cristian Satmarean 21 Mar '13

21 Mar '13

Hi, I always like to write to this list because I get answers. Thank you! I would like to ask if Dell Metered PDU's are supported or planned to be supported: PDU Identification Attribute Value Model DELL Part Number 09FG8 Serial Number CN-009FG8-75166-31F-0005-A02 Firmware Version 01.02.0011 Web/SNMP Card Identification Attribute Value Firmware Version DELL DPI 01.04.0041 Serial Number 111210312380017 MAC Address B8-AC-6F-FC-F9-C9 NMC Up-Time 44 days 19 hours 11 mins 16.49 secs. Best!

3 2

Observium Network Discovery
by Rizwan azher 21 Mar '13

21 Mar '13

Hi All, - How actually network discovery works for observium ? I mean do I have to just enable SNMP with same community and same Snmp version on all my devices so that observium can discover my whole networkor I jus have to add of single device name in config.apt and whole network will be autoatically discovered?..... and does observium also show me the whole map for my network ( connectivity b/w my devices)? and most important do i need to make any device as Seed device for my network ? from which it will automatically penetrate to whole network...Further more after discovering of my device can i filter those graphs so that I can only plot useful or main graphs - Can I also make groups to those graphs I mean is it possible that I can make a separate tab for my roters and the \n separate tab for switches etc. Thanks Rizwan

2 1

VMware ESXi hosts missing information
by Matt Hucker 21 Mar '13

21 Mar '13

Hi all, I'm using Observium r3791 to monitor a few VMware ESXi 5.1 hosts along with a mix of servers and network gear. All seems to be running well, except for the ESX hosts. When Observium polls the ESX hosts it seems to be missing a lot of information due to missing MIBs: My /etc/snmp/snmpd.conf has the mibdirs line as per the installation instructions. mibdirs /opt/observium/mibs It seems if I copy all of the mibs from the /opt/observium/mibs directory to /usr/share/mibs, then the poller seems to run OK. No more missing module errors. Is this expected behaviour? Partial debug poller output below: Observium Poller v0.13.3.3784 DEBUG! Starting polling run: SQL[SELECT `device_id` FROM `devices` WHERE `disabled` = 0 AND `hostname` LIKE 'esx01%' ORDER BY `device_id` ASC] SQL[SELECT * FROM `devices` WHERE `device_id` = '11'] SQL[SELECT * FROM devices_attribs WHERE `device_id` = '11'] esx01.prod.nrhosted.com 11 vmware DEBUG: SNMP Auth options = -v2c -c esx01 /usr/bin/snmpget -v2c -c esx01 -Oqv -m SNMPv2-MIB -M /opt/observium/mibs udp:esx01.prod.nrhosted.com:161 sysObjectID.0 SNMPv2-SMI::enterprises.6876.4.1 RRD[update /opt/observium/rrd/esx01.prod.nrhosted.com/status.rrd N:1] OK u:0.01 s:0.00 r:0.07 RRD[update /opt/observium/rrd/esx01.prod.nrhosted.com/ping.rrd N:1.08] OK u:0.02 s:0.00 r:0.07 RRD[update /opt/observium/rrd/esx01.prod.nrhosted.com/ping_snmp.rrd N:46.31] DEBUG: SNMP Auth options = -v2c -c esx01 /usr/bin/snmpget -v2c -c esx01 -OQUs -m +VMWARE-ROOT-MIB:VMWARE-SYSTEM-MIB -M +/opt/observium/mibs/vmware udp:esx01.prod.nrhosted.com:161 VMWARE-SYSTEM-MIB::vmwProdName.0 VMWARE-SYSTEM-MIB::vmwProdVersion.0 VMWARE-SYSTEM-MIB::vmwProdBuild.0 MIB search path: /root/.snmp/mibs:/usr/share/mibs/site:/usr/share/snmp/mibs:/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/netsnmp:/opt/observium/mibs/vmware The first call to snmpget has the correct MIB path (/opt/observium/mibs), but the 2nd call to snmpget seems to only include the /opt/observium/mibs/vmware (leaving out /opt/observium/mibs) Consequently I get a lot of errors such as these: Cannot find module (SNMPv2-TC): At line 10 in /usr/share/mibs/netsnmp/UCD-DLMOD-MIB Cannot find module (SNMPv2-SMI): At line 34 in /usr/share/mibs/netsnmp/UCD-SNMP-MIB Cannot find module (SNMPv2-TC): At line 37 in /usr/share/mibs/netsnmp/UCD-SNMP-MIB Did not find 'enterprises' in module #-1 (/usr/share/mibs/netsnmp/UCD-SNMP-MIB) Did not find 'DisplayString' in module #-1 (/usr/share/mibs/netsnmp/UCD-SNMP-MIB) Did not find 'TruthValue' in module #-1 (/usr/share/mibs/netsnmp/UCD-SNMP-MIB) -- Cheers, Matt.

3 3

Observium r3779
by Laurens Vets 20 Mar '13

20 Mar '13

Hello, Quick question about the new interface. All 'toolbars' now seem to have an arrow. When I hover over them, should that normally open a list?

1 1

zfs file system size wrong listed
by Mihai - Cristian Satmarean 20 Mar '13

20 Mar '13

Hi all, I have a zfs filesystem on OpenIndiana that is 25 TB and occupancy is around 90%. Observium correctly recognizes most of the OpenIndiana features, but the size of this filesystem is reported around 1.5 Tb. Is there something I can do to fix it? Thank you!

4 13

new device if possible
by Mihai - Cristian Satmarean 19 Mar '13

19 Mar '13

Hi, we have this clima for servers *Stulz GmbH Klimatechnik WIB 8000* Operating System Generic Device Contact local admin Location aircondition what should we do to have it in the Observium. Observium seems cooler and cooler for us. Thanks !

2 1

Re: [Observium] Fwd: [Observium-dev] r3775 - observer/trunk/includes/discovery/os
by Adam Armstrong 19 Mar '13

19 Mar '13

All future HP kit is comware. I.e. descended from h3c kit they bought. Of course it all gets the pro curve brand even if they share nothing in common. Tom Laermans <tom.laermans(a)powersource.cx> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Huawei Neighbours
by Ciro Iriarte 18 Mar '13

18 Mar '13

Hi!, is there any project to improve Huawei network gear support?, currently there is some useful info that's missing, for example the neighbours view that we have with Cisco/CDP Huawei supports LLDP but that info is no available currently (rev3745). Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

3 4

Re: [Observium] Plz need suppor ...
by Adam Armstrong 17 Mar '13

17 Mar '13

Stop spamming. You have disqualified yourself from any assistance fronts de team by spamming this list, the bugtracker/code-reviewer and my blog. Most of these are things you could work out by your self. Being impatient and acting like an entitled douche has not helped you. Adam. Rizwan Tw1 <riz.tw1(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Plz need suppor ...
by Rizwan Tw1 17 Mar '13

17 Mar '13

Hi all, Can any one please confirm about the mentioned below detials are supported over observium . - Interface monitoring ( All ypes of pors as STM's, FE , GE , XGE , etc - device statisics (CPU, Memory , etc ) - IPSLA MIB support - QOS/COS support - RRD suuport - Format of files relaed to data of graphs - VPN/neighbour prefix details - Status of Routing protocols -How much of Hardware requirement will be needed for monitoring of about 50 Routers along with 150 L3/L2 switches considering polling time for about 5 min. As an average routers have about 20 ports nd L3 switches with about 40 ports eachs, nd layer switches have 25 ports. - How actually network discovery works for observium ? I mean do I have to just enable SNMP with same community and same Snmp version on all my devices so that observium can discover my whole network and does observium also show me the whole map for my network ( connectivity b/w my devices) and most important do i need to make any device as Seed device for my network ? from which it will automatically penetrate to whole network...Further more after discovering of my device can i filter those graphs so that I can only plot useful or main graphs - Can I also make groups to those graphs I mean is it possible that I can make a separate tab for my roters and the \n separate tab for switches etc. Thanks Muhammad Rizwan Azher

1 0

Help | Observium support
by Rizwan Tw1 17 Mar '13

17 Mar '13

Hi all, Can any one please confirm about the mentioned below detials are supported over observium . - Interface monitoring ( All ypes of pors as STM's, FE , GE , XGE , etc - device statisics (CPU, Memory , etc ) - IPSLA MIB support - QOS/COS support - RRD suuport - Format of files relaed to data of graphs - VPN/neighbour prefix details - Status of Routing protocols How much of Hardware requirement will be needed for monitoring of about 50 Routers along with 150 L3/L2 switches considering polling time for about 5 min. As an average routers have about 20 ports nd L3 switches with about 40 ports eachs, nd layer switches have 25 ports. Thanks Muhammad Rizwan Azher

2 3

Application Stats
by Ciro Iriarte 16 Mar '13

16 Mar '13

Hi!, what's the state of application data collection?. I had stats for mysql and apache on my original install, but after it's reincarnation the application collection doesn't seem to work any more, was that moved to the unix agent? We would like to include application counters to observium and most of them are custom developments. Today we have cacti installs everywhere, but having all that info in one place would be great. Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

1 0

Re: [Observium] browsable archives and (sub)domains in hostnames
by Adam Armstrong 16 Mar '13

16 Mar '13

I would fire you guys so hard.... :-) Adam. Sander Steffann <sander(a)steffann.nl> wrote: >Hi, > >> Including domain.tld is a little overkill, no? > >Oh, for displaying in Observium: certainly! > >> Maybe a config option to strip the words to the right of x number of dots so folks can decide if they want to add domain.tld or just device.pop.whatever.whatever? >> >> For me, I have device.rack.site.city.domain.tld so my requirements would be different than just device.site.domain.tld. > >That's a very hierarchical name :-) >Sander > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] can anyone tell me what is this?
by Adam Armstrong 16 Mar '13

16 Mar '13

I had 100 centos boxes to maintain last year and wrote it. I have never used sles, so it would be unmaintainable. Adam. Ciro Iriarte <cyruspy(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] can anyone tell me what is this?
by Adam Armstrong 16 Mar '13

16 Mar '13

Read the redhat installation instructions properly, this is trivially obvious. You did not follow them properly. You thought you knew better. This has resulted in you looking foolish. Adam. ilkay.karadam(a)servisturk.com.tr wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] can anyone tell me what is this?
by Adam Armstrong 16 Mar '13

16 Mar '13

Interesting way to talk to someone who's code you run without reading first... ilkay.karadam(a)servisturk.com.tr wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] can anyone tell me what is this?
by Adam Armstrong 16 Mar '13

16 Mar '13

Better for you, perhaps. Our policy is not to spoon feed information we have already provided in the install documentation. If you are not capable of following it, you should not be using observium. We only have limited time to work on the project and do not believe supporting lazy users is an efficient use of that time. Adam. ilkay.karadam(a)servisturk.com.tr wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] can anyone tell me what is this?
by ilkay.karadam＠servisturk.com.tr 16 Mar '13

16 Mar '13

1 0

Re: [Observium] can anyone tell me what is this?
by ilkay.karadam＠servisturk.com.tr 16 Mar '13

16 Mar '13

1 0

Poller performance
by Ciro Iriarte 16 Mar '13

16 Mar '13

Hi!, I've been running Observium on SLES11 for almost a year. This was on a 8 vCPU + 2GB RAM VMware guest with a 30GB RRD footprint. After adding about 320 new hosts (all of them, network gear) the RRD database went to 130GB and the little machine got peaks of 3k IOPS. The I/O wait was rather hi and the machine would suddently stop responding (Hypervisor stats showed 0% CPU usage). So, I've migrated the installation to a physical machine running Solaris 11 (I know, it's not supported) and without any tunning (mysql/zfs are candidates) I'm seeing polling of 41 devices in about an hour. Is this usual/expected? -- ./poller.php 0/24 February 13, 2013, 18:27 - 27 devices polled in 4048. secs ./poller.php 7/24 February 13, 2013, 18:27 - 27 devices polled in 4075. secs ./poller.php 0/24 February 13, 2013, 18:28 - 27 devices polled in 3803. secs ./poller.php 22/24 February 13, 2013, 18:28 - 27 devices polled in 4404. secs ./poller.php 3/24 February 13, 2013, 18:28 - 28 devices polled in 4417. secs -- IOPS climbed to 5k, comments? Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

6 17

Re: [Observium] can anyone tell me what is this?
by ilkay.karadam＠servisturk.com.tr 16 Mar '13

16 Mar '13

2 1

can anyone tell me what is this?
by ilkay.karadam＠servisturk.com.tr 16 Mar '13

16 Mar '13

2 1

Re: [Observium] Postgres Support (Corey Robertson)
by Corey Robertson 16 Mar '13

16 Mar '13

I'm with Morgan. I honestly look forward to these gems :) thanks for the whit Adama On Mar 15, 2013, at 11:00 PM, observium-request(a)observium.org wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: Postgres Support (Adam Armstrong) > 2. Re: browsable archives and (sub)domains in hostnames > (Morgan McLean) > 3. Re: Smokeping Integration (Paul Gear) > 4. Re: Postgres Support (Ciro Iriarte) > 5. Re: Poller performance (Ciro Iriarte) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 15 Mar 2013 22:00:51 +0000 > From: Adam Armstrong <adama(a)memetic.org> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Postgres Support > Message-ID: <7f31733976f14ca39580a76d9a74a178@localhost> > Content-Type: text/plain; charset=UTF-8 > > > my stupid webmail client wouldn't let me put an inline image :( > > On Fri, 15 Mar 2013 15:53:34 -0700, Morgan McLean <wrx230(a)gmail.com> > wrote: >> Half the time, I come to this list for entertainment. Today, it has >> delivered. >> >> Thanks! >> Morgan >> >> >> On Fri, Mar 15, 2013 at 3:31 PM, R00T SHELL >> <denizenofearth(a)gmail.com>wrote: >> >>> Thanks everyone. >>> >>> On Fri, Mar 15, 2013 at 5:54 PM, Tom Laermans >>> <tom.laermans(a)powersource.cx >>>> wrote: >>> >>>> On 15/03/2013 21:31, R00T SHELL wrote: >>>> >>>> Hi Everyone, >>>> >>>> Instead of MySQL as the backend data store, is Postgres an option here >>>> please? >>>> >>>> Thanks! >>>> >>>> >>>> [image: Futurama Fry - not sure if serious or just trolling] >>>> >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > ------------------------------ > > Message: 2 > Date: Fri, 15 Mar 2013 16:47:29 -0700 > From: Morgan McLean <wrx230(a)gmail.com> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] browsable archives and (sub)domains in > hostnames > Message-ID: > <CAPiLEQf1ezSgj+Z_0MVS3Qvz+E1r4T=oiZOpjvnEZKkFyMjC_A(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Make it a config option and submit it as a patch! > > > On Fri, Mar 15, 2013 at 6:21 AM, Andreas R?del < > observium(a)blueeyedcreature.net> wrote: > >> thanks so much! >> >> works >> >> >> Andreas >> >> >> >> On 15 March 2013 12:29, Michiel Klaver <michiel(a)klaver.it> wrote: >> >>> At 15-03-2013 09:59, Andreas R?del wrote: >>>> Hi, Observium >>>> >>>> 2) I need some hint where I can change the behaviour of observium to cut >>>> avay domains after the first dot - we used subdomains to segment our >>>> hardware so now all devices are called the same on the overview screen. >>>> (alarms / events) >>>> >>>> Example: >>>> switch1.site1.country1 >>>> switch1.site2.country1 >>>> switch1.site1.country2 >>>> and so on.. >>>> (I know it's boring but we ran out of elven names at one point...) ;) >>>> >>>> on the overview page they would all be called "switch1" >>>> when I go to "devices" everything is just fine >>>> >>>> can this be changed somewhere? could not find in config.php and don't >>> dare >>>> editing the other files >>> >>> >>> It's not changeable as config option, but located here: >>> /opt/observium/includes/common.php >>> >>> Search for line 149: >>> function shorthost($hostname, $len=12) >>> >>> And change 12 to 30, or something that fit's your needs... >>> >>> >>> THIS IS A QUICK HACK, COULD BREAK SVN, NO SUPPORT. >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > -- > Thanks, > Morgan >

1 0

Postgres Support
by R00T SHELL 16 Mar '13

16 Mar '13

Hi Everyone, Instead of MySQL as the backend data store, is Postgres an option here please? Thanks!

5 6

Smokeping Integration
by Tim Calvin 16 Mar '13

16 Mar '13

Trying to get some assistance on integrating Smokeping into Observium. Unable to get the ping tab to appear under my devices. I have read the documentation and seem to have everything in order. Not sure if it is just the way I have the devices named or something else. Smokeping's html files are located at: /var/www/smokeping/ I have edited Observium's config.php to include the following: $config['smokeping']['dir'] = "/var/www/smokeping/"; Observium is using identical hostnames to the ones from the Smokeping config snippet below. I can access the Smokeping webpage and can verify it is working properly. Am I missing something? + dlls-asr9k_tlsn_net host = dlls-asr9k.tlsn.net + sant-asr9k_tlsn_net host = sant-asr9k.tlsn.net + mdld-asr9k_tlsn_net host = mdld-asr9k.tlsn.net Thanks in advance. Tim

2 1

the netscaler graphing is amazing
by Stefan Milo 15 Mar '13

15 Mar '13

i just wanted to say thank you for an amazing product. im graphing cisco, force10, pfsense, citrix netscalers you name it... everything always looks amazing, clean and simple. i just donated (small donation, but everything counts i guess) to your project as my way of saying thank you. br stefan milo

1 0

Verifying timeouts
by Bryan Socha 15 Mar '13

15 Mar '13

We've been using observium for well over a year now and extrememly happy with it. We have devices all over the world and recently started to see some strange reboot, high cpu loads and device up/down messages when the devices appear to be ok I recently noticed it seems to be the ones further away. I noticed the log really doesn't specify anything specific and my php skills are not up to snuff so I was wondering how would one go about verifying if we are seeing timeouts on the polling to know the best way to rectify the situation we are experiencing. Can someone verify is say the timeout of a cpu poll would actually how max cpu load? Thanks, Bryan

1 0

solarflare SFN5162F nic not showing on graph
by Mihai - Cristian Satmarean 14 Mar '13

14 Mar '13

*Hi, Solarflare* SFN5162F Dual Port Card is not graphed at all OS openindiana 148 Driver 3.0.5 is something known? Best!

2 2

Re: [Observium] dell force10 s4810 mib and dell m1000e blade chassis
by Adam Armstrong 14 Mar '13

14 Mar '13

Oh. You don't need to do much to update. It's documented on the wiki. svn up ./discovery.php -h new And it'll be updated. Mihai - Cristian Satmarean <mihai.satmarean(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

addhost.php
by Ravindra Gupta 13 Mar '13

13 Mar '13

Hi Team, Can we use IP address instance of Hostname ./addhost.php test.observium.inpublic v2c Can we use below IP address on addhost.php. ./addhost.php 10.0.0.25 public v2c

2 1

snmp custom oid graphing
by Tsvetan Blagoev 12 Mar '13

12 Mar '13

Hello ! First of all, thank you for the gr8 product and keep up the good work :) I am using observium in a small infrastructure (ESXi servers and linux appliances with snmp enabled) and I am facing two problems: -monitoring ESXi performance metrics - those are not exposed via snmp, so I have installed VMware CIM binaries to query the host machines. However, I am not aware how to pass data to observium afterwards and get a performance graph. -graphing data from a custom snmp OID ( snmp exec or extend) Thanks in advance! Best Regards, TSVETAN BLAGOEV QA Engineer, Axway Business Park Sofia Mladost 4, Build. 11B, Fl. 2 1766 Sofia tblagoev(a)axway.com<mailto:tblagoev@axway.com> - http://www.axway.com P Before printing, think about the environment.

3 3

Re: [Observium] pfsense device id not working in v.3716
by Adam Armstrong 12 Mar '13

12 Mar '13

Remember, always svn up before posting, else you might look silly. Mike Stupalov <landy2005(a)gmail.com> wrote: >On 03/12/2013 01:04 PM, Stefan Milo wrote: >> i recently did an upgrade from version 3476 to version 3716. >> >> today i added a new pfsense device to my install, but the device id isn't recognized. >> >> i confirmed the error on a different install of observium with the same version. >> >> see attached screenshot. >> >> is it a bug, or is it just me? :) > > >Please use latest revision. This bug fixed in r3732. > >> >> br >> >> stefan milo >> >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > > >-- >Mike Stupalov > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

pfsense device id not working in v.3716
by Stefan Milo 12 Mar '13

12 Mar '13

i recently did an upgrade from version 3476 to version 3716. today i added a new pfsense device to my install, but the device id isn't recognized. i confirmed the error on a different install of observium with the same version. see attached screenshot. is it a bug, or is it just me? :) br stefan milo

2 1

All graphs not plotting
by orznew orznew 12 Mar '13

12 Mar '13

Hi All, I've added a Dlink DES and a HP Procurve switch in my observium. Observium can lean about my used and unused port, but the graphs doesn't plot. Anything to be done to plot? Thank you.

2 2

Re: [Observium] Minimum Hardware Requirments
by Adam Armstrong 11 Mar '13

11 Mar '13

Requirements depend upon scale. From single CPU VM to 24 core server with raided ssds. Rizwan Tw1 <riz.tw1(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Minimum Hardware Requirments
by Tom Laermans 11 Mar '13

11 Mar '13

Hi Muhammad, Based on the information you provided: a dedicated server running ubuntu 12.10 with a cpu, memory and a hard drive. Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Rizwan Tw1" <riz.tw1(a)gmail.com> To: <observium(a)observium.org> Subject: [Observium] Minimum Hardware Requirments Date: Mon, Mar 11, 2013 11:44 Hi All, I am employed in an ISP. Currently my company is looking for possible evaluation of Observium as NMS for our Metro and MPLS setup. Please share the minimum hardware requirements for the installation ASAP. Thanks Regards Muhammad Rizwan Azher

1 0

Minimum Hardware Requirments
by Rizwan Tw1 11 Mar '13

11 Mar '13

Hi All, I am employed in an ISP. Currently my company is looking for possible evaluation of Observium as NMS for our Metro and MPLS setup. Please share the minimum hardware requirements for the installation ASAP. Thanks Regards Muhammad Rizwan Azher

1 0

Adding MIB
by Johnathan Lee 11 Mar '13

11 Mar '13

Hi Guys, I'm new to Observium and I've got BTI Systems MIB Files and I would like to add it to the system. How do I go and add the MIB files? Regards, John

2 1

Custom Logo with latest SVN
by Andrew Lynch 10 Mar '13

10 Mar '13

Long time listener, first time caller. I've been enjoying the SVN updates including the visual redesign. I was wondering if there is a new config option to set the logo on the new header bar. My config has the old one in place, but the redesigned bar is obviously smaller than the logo. Thanks for all the great work! I use Observium at home for all my servers. -Andy -- Andrew Lynch (KD0IOE) lurch89(a)gmail.com http://andrewrlynch.com "Scientists study the world as it is; engineers create the world that has never been." —Theodore von Kármán

1 0

Freeradius app patch
by Nikos Hasiotis 09 Mar '13

09 Mar '13

Hi, I did some work for adding support for freeradius. You may find the patch at the following url: http://master.math.upatras.gr/~hasiotis/freeradius-app.diff It's working but It may need improvement on the way graphs are rendered. Please feel free to add to observium if you like it. Thanks -- Nikos

3 2

SysUptime issue
by Mike Richardson 09 Mar '13

09 Mar '13

Hiya, We've noticed that Observium is reporting that devices have rebooted even though they haven't. It's happening at the 496 day mark and so we're assuming that this is related to the 32bit SysUptime counter limitation. I noticed though that there is a section of code which says: // Use snmpEngineTime (68 year rollover) to cross-reference for false // positives in device rebooting due to sysUpTime rollover issues so I presume this ought not be happening. I can appreciate that this is a difficult one to test. Or rather, it's easy to test but has a *really* long debug cycle :-) We're currently running 0.13.2.3559. Here's the output from a device which observium recently reported as having rebooted: SNMP-FRAMEWORK-MIB::snmpEngineTime.0 = INTEGER: 43016530 DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (6689166) 18:34:51.66 If you want any more information just ask. Given the number of devices we have with uptimes around 496 days we can probably do a test every few days. Thanks, Mike -- Mike Richardson Networks (network(a)manchester.ac.uk) IT Services, University of Manchester *Plain text only please - attachments stripped on arrival*

4 13

Poller debugging
by Jason Lixfeld 07 Mar '13

07 Mar '13

Hi, I've checked around for some docs on this subject but I'm coming up empty. Not sure if I'm looking in the wrong spot or if they just don't exist. I'm noticing the odd gap in all graphs for a particular device, and only that device. The two gaps in the last 24 hours seem to have lasted about 15 and 30 minutes, respectively. This is the first time I've seen these gaps on this device, but I did upgrade the code on this box last week. I'm convinced it's a software issue on the router I'm polling, but I need some ammo for the vendor. To that end, I'd like to enable some debugging that will show what the poller is reporting (or not reporting) when it hits this device. My hope is to catch something useful in the debugs that I can bring to the vendor. Any hits appreciated. Thanks!

2 2

Platform change on existing device
by Florian Hibler 07 Mar '13

07 Mar '13

Hi everyone, we just replaced one of our core routers and therefore changed platform from Cisco to Juniper. Whilst the interfaces got discovered correctly, Observium does not detect the change of the device/platform itself. Also the full discovery, which runs every few hours did not notice. Is there a way to rediscover a device without deleting it or will there be any feature like "platform change detected" during the full discover in future? Thanks and best regards, Florian -- Florian Hibler Chief Technical Officer eMail: florian.hibler(a)kaiaglobal.com Kaia Global Networks Limited Internet: http://www.kaiaglobal.com Company No. 08257877 Registered Office: High Wycombe, UK Notice: This transmittal and/or attachments may be privileged or confidential. If you are not the intended recipient, you are hereby notified that you have received this transmittal in error; any review, dissemination, or copying is strictly prohibited. If you received this transmittal in error, please notify us immediately by reply and immediately delete this message and all its attachments. Thank you.

3 3

Re: [Observium] Memory requirements
by Adam Armstrong 07 Mar '13

07 Mar '13

It depends how big your installation is :-) Like all things, you need to scale your own installation. We now do more caching instead of repeated lookups, requiring more ram on large installs. Adam. Ciro Iriarte <cyruspy(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

Re: [Observium] Collect / Graph / Bill IP
by Andreas Bergman 07 Mar '13

07 Mar '13

The Netflow collection i get, but is there any way to integrate the collection results with Observium? Andreas -----Original Message----- From: "Nikolay Shopik" <shopik(a)inblock.ru> Sent 3/7/2013 3:23:01 PM To: "Observium Network Observation System" <observium(a)observium.org> Subject: Re: [Observium] Collect / Graph / Bill IP Well use netflow then. Observium doesn't collect netflow if this is what you asking On 07.03.2013, at 13:46, "Andreas Bergman" <andreas(a)sea-ab.se> wrote: > Hi all, > > Is it possible to collect and bill traffic data per IP instead of per Physical port? Via NetFlow/sFlow or similar? > > Br > Andreas > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ��

3 2

Juniper BGP Prefix Graphing Issue
by Joe Wooller 07 Mar '13

07 Mar '13

Hey Guys, I have just started using Observium, so far I think it's great! (Good work) I have however stumbled across an issue with BGP Prefixes on my Juniper J2320. When I do a debug on discovery.php and poller.php (after adding the host) it appears that it is extracting the correct information for jnxBgpM2PrefixInPrefixesAccepted and jnxBgpM2PrefixInPrefixesRejected for both IPv4 and IPv6, however it only seems to graph the prefixes from only 1 of my peers (they have 2 ipv4 and 1 ipv6 session with me) so I am seeing graphs for these 3, but not any others. In the debug information I am also only seeing an update for the graphs that are working. (Obviously) SQL[UPDATE `bgpPeers_cbgp` set `AcceptedPrefixes` ='58',`DeniedPrefixes` ='0',`PrefixAdminLimit` ='',`PrefixThreshold` ='',`PrefixClearThreshold` ='',`AdvertisedPrefixes` ='3103',`SuppressedPrefixes` ='',`WithdrawnPrefixes` ='' WHERE `device_id` = '7' AND bgpPeerIdentifier = 'x.x.x.x' AND afi = 'ipv4' AND safi = 'unicast'] RRD[/usr/bin/rrdtool create /opt/observium/rrd/rs1/cbgp-x.x.x.x.ipv4.unicast.rrd DS:AcceptedPrefixes:GAUGE:600:U:100000000000 \ DS:DeniedPrefixes:GAUGE:600:U:100000000000 \ DS:AdvertisedPrefixes:GAUGE:600:U:100000000000 \ DS:SuppressedPrefixes:GAUGE:600:U:100000000000 \ DS:WithdrawnPrefixes:GAUGE:600:U:100000000000 RRA:AVERAGE:0.5:1:2016 RRA:AVERAGE:0.5:6:1440 RRA:AVERAGE:0.5:24:1440 RRA:AVERAGE:0.5:288:1440 RRA:MIN:0.5:1:720 RRA:MIN:0.5:6:1440 RRA:MIN:0.5:24:775 RRA:MIN:0.5:288:797 RRA:MAX:0.5:1:720 RRA:MAX:0.5:6:1440 RRA:MAX:0.5:24:775 RRA:MAX:0.5:288:797 RRA:LAST:0.5:1:1440 ] OK u:0.00 s:0.01 r:14.58 RRD[update /opt/observium/rrd/rs1/cbgp-x.x.x.x.ipv4.unicast.rrd N:58:0:3103::] I see this for all 3 sessions the peer has, but for none of the others. I am not sure where to start debugging this further. Any help would be greatly appreciated? Cheers Joe

3 3

Collect / Graph / Bill IP
by Andreas Bergman 07 Mar '13

07 Mar '13

Hi all, Is it possible to collect and bill traffic data per IP instead of per Physical port? Via NetFlow/sFlow or similar? Br Andreas

2 1

Got permission denied on IE
by Ariyanto Dewo 07 Mar '13

07 Mar '13

Hi all, I don't know whether Observium support IE or not, but when I run it in IE I got permission denied as shown below: All the menus are functioning normally. I already dig the log file but nothing related to this message. Can I assume this message safely to ignore? Rgds, -dewo-

1 0

Traffic bills
by Mattias Gyllenvarg 07 Mar '13

07 Mar '13

Hi Adam About the traffic Bills. After a month is billing period is completed will the data be preserved even if interfaces are added/removed from the billing? The reason I ask is that it is a hassle too keep track of aggregated usage of things like Peering/Infrastructure/Transit as you constantly upgrade and move things around. So, perhaps a snapshot could be taken at certain points too keep this data? Pipedream? -- *Med Vänliga Hälsningar - Best Regards* *Mattias Gyllenvarg* *Nätutveckling* Bredband2 Tel: +46 406219712

1 0

Re: [Observium] Memory requirements
by Adam Armstrong 06 Mar '13

06 Mar '13

These are warnings you can ignore them. They should be disabled in the php config. Ciro Iriarte <cyruspy(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Memory requirements
by Ciro Iriarte 06 Mar '13

06 Mar '13

Hi!, is it possible that there's some new memory requirements introduced with the last UI changes?. I can only make the main page load with PHP parameter memory_limit = 512M, before that it was working with 96M. Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

1 1

Dell PowerConnect 6224 not updating "Uptime"
by Stefan Milo 06 Mar '13

06 Mar '13

i was asked to add a couple of dell powerconnect iscsi switches to observium (Observium 0.12.12.3476) last night... but the "uptime" field doesn't seem to update on observium. >From my webinterface: ------------------------------------------------------------------------------- Hardware Dell PowerConnect 6224 Operating System Dell PowerConnect 3.3.5.5 (Dell Ethernet Switch) Uptime 5m 54s <--- this number doesn't change...? ------------------------------------------------------------------------------- when polling the device from my observium box: ------------------------------------------------------------------------------- root@observium00:/opt/observium# ./poller.php -h iscsi01.d2 Observium Poller v0.12.12.3476 Starting polling run: iscsi01.d2 10 powerconnect Module [ unix-agent ] disabled globally. Using SNMP Agent Uptime (0:1:32:49.00) Uptime: 1h 32m 49s <--- uptime on the box is correct...? Hardware: Dell PowerConnect 6224 Version: 3.3.5.5 Features: Dell Ethernet Switch -------------------------------------------------------------------------------

1 0

Aruba feature request
by Mike Richardson 05 Mar '13

05 Mar '13

What would be handy for us is to have graphs of not just the number of clients on our Aruba M3 controllers, but the number of .1x clients and the number of captive portal clients. This could either be separate graphs or combined with the 'number of clients' graphs. Don't mind really. The OID for .1x clients is .1.3.6.1.4.1.14823.2.2.1.4.1.4.1.0 and for CP clients is .1.3.6.1.4.1.14823.2.2.1.4.1.4.3.0 Thanks, Mike -- Mike Richardson Networks (network(a)manchester.ac.uk) IT Services, University of Manchester *Plain text only please - attachments stripped on arrival*

5 4

observium.org down?
by Julian Rutz 05 Mar '13

05 Mar '13

Hello, Is observium.org down? It gives me only "Http/1.1 Service Unavailable". Cheers, Julian

1 0

Discovery of large stack causes hardware to become unresponsive
by Patrick Zaloum 05 Mar '13

05 Mar '13

Hello I are testing Observium in a new environment after previous success stories elsewhere. We have noted that when we run device discovery on a stack of 5 Cat3750 (12.2-50-SE1) the "device" becomes unresponsive to any other queries / pings / ssh for approximately 5-6 minutes (during the discovery cycle). Once the discovery is complete, the poller, pings, and other operations return to normal. Note that traffic flow does not appear to be affected across the switch. Total ports on the stack are 278 (no argument that it is a large number of ports to poll from a single device). Regular polling of the device does not appear to have any consequences, it is specific to the discovery module. Does anyone have any insight into this? Thanks Patrick

4 5

Re: [Observium] Graphs stopped working
by Tom Taylor 04 Mar '13

04 Mar '13

It's definitely getting data, but not drawing the graphs. [cid:DC1FB0AD-5669-4C3A-9092-6F2E5B63F45F@mill-ny.com] On Feb 20, 2013, at 2:23 PM, Tom Taylor <taylor(a)themill.com<mailto:taylor@themill.com>> wrote: That worked fine, got results out of it: | 109add5bb619 | 16|16 (16|16) | learned 1 | 10bf48777e67 | 37|37 (37|37) | learned 1 | 1803732a0dba | A1|49 (49|49) | learned 1 | 18037340b783 | A1|49 (49|49) | learned It popped them into the DB SQL[INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('1','1','8','00e081df7140','learned')] + And nope, no SELINUX I'm stumped. On Feb 20, 2013, at 12:38 PM, Adam Armstrong <adama(a)memetic.org<mailto:adama@memetic.org>> wrote: run the poller on a single host with debugging enabled : ./poller.php -h <host> -d Did your selinux enable itself? adam. On Wed, 20 Feb 2013 18:01:15 +0000, Tom Taylor <taylor(a)themill.com<mailto:taylor@themill.com>> wrote: Hi there, I was wondering if anyone's got an idea as to why graphs would suddenly stop working? (see attachment) I hadn't updated anything or changed anything, the rrd's all have data in. It's running off Centos 6.2 Any ideas on how to troubleshoot? [cid:18152FC1-6ED1-47C0-8A4D-DC5CBEF4B7BF@mill-ny.com<mailto:DC5CBEF4B7BF@mill-ny.com>] _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 6

Re: [Observium] Discovery of large stack causes hardware to become unresponsive
by Tom Laermans 04 Mar '13

04 Mar '13

Hi Patrick. That's surely not supposed to happen. It's quite a number of ports, but certainly nothing that should be an issue, i poll larger stacks and people poll devices with thousands of interfaces. I would try to check with the -d switch and see which queries lock it up, then report this to cisco as that's simply unacceptable. If you know what causes it and you don't happen to need that info, you could disable that discovery module for those devices. That should help you out while cisco will treat your issue with utmost urgency and does the needful *cough* Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Patrick Zaloum" <pzaloum(a)gmail.com> To: <observium(a)observium.org> Subject: [Observium] Discovery of large stack causes hardware to become unresponsive Date: Mon, Mar 4, 2013 16:02 HelloI are testing Observium in a new environment after previous success stories elsewhere. We have noted that when we run device discovery on a stack of 5 Cat3750 (12.2-50-SE1) the "device" becomes unresponsive to any other queries / pings / ssh for approximately 5-6 minutes (during the discovery cycle). Once the discovery is complete, the poller, pings, and other operations return to normal. Note that traffic flow does not appear to be affected across the switch. Total ports on the stack are 278 (no argument that it is a large number of ports to poll from a single device). Regular polling of the device does not appear to have any consequences, it is specific to the discovery module. Does anyone have any insight into this? ThanksPatrick

1 0

Re: [Observium] Web UI doesn't show
by Adam Armstrong 04 Mar '13

04 Mar '13

This is lack of mod_rewrite. It is documented in the install guide and in the FAQ. Adam. orznew orznew <orznew(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

Re: [Observium] Web UI doesn't show
by Tom Laermans 04 Mar '13

04 Mar '13

Hi, The commad apache2ctl -s (if i recall correctly) shows you all vhost definitions and which file they're defined in. That should help. Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "orznew orznew" <orznew(a)gmail.com> To: "Observium Network Observation System" <observium(a)observium.org> Subject: [Observium] Web UI doesn't show Date: Fri, Mar 1, 2013 08:04 Hi Adam, Thanks a lot. Guess need to dig in a lot more to confirm. On Fri, Mar 1, 2013 at 2:02 PM, Adam Armstrong <adama(a)memetic.org> wrote: I'm not sure. /etc/apache2/htdocs is not a standard path for any Linux distro I know of, so something has been changed. You'll need to work out what that is :) adam. On Fri, 1 Mar 2013 12:26:48 +0800, orznew orznew <orznew(a)gmail.com> wrote: > Hi Adam, > > I'm quite new to Apache2. Can I know if there is any specific file for me > to configure the pointing? > > Thank you. > > On Fri, Mar 1, 2013 at 11:29 AM, Adam Armstrong <adama(a)memetic.org> wrote: > >> >> You have an existing default site configuration which is pointing at >> /etc/apache2/htdocs. >> >> adam. >> >> On Fri, 1 Mar 2013 10:06:54 +0800, orznew orznew <orznew(a)gmail.com> >> wrote: >> > Dear All, >> > >> > I need some help for installing observium in Ubuntu 12.04. I've >> > followed >> > the manual in the website for the installation and everything went >> smooth >> > until I actually want to deploy the web UI. I've managed to add in the >> > device and had paste the code listed in the page to >> > /etc/apache2/sites-available/default. But when I access the website, it >> > shows nothing but error message saying that nothing has been found. >> > I've >> > checked my apache2 error log and it says "File does not exist: >> > /etc/apache2/htdocs". I have another website in the server as well, >> > does >> it >> > have a problem with something else hosted in it? Below is the result I >> get >> > from apache2 -V: >> > apache2 -V >> > Server version: Apache/2.2.22 (Ubuntu) >> > Server built: Nov 8 2012 21:37:36 >> > Server's Module Magic Number: 20051115:30 >> > Server loaded: APR 1.4.6, APR-Util 1.3.12 >> > Compiled using: APR 1.4.6, APR-Util 1.3.12 >> > Architecture: 64-bit >> > Server MPM: ITK >> > threaded: no >> > forked: yes (variable process count) >> > Server compiled with.... >> > -D APACHE_MPM_DIR="server/mpm/experimental/itk" >> > -D APR_HAS_SENDFILE >> > -D APR_HAS_MMAP >> > -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) >> > -D APR_USE_SYSVSEM_SERIALIZE >> > -D APR_USE_PTHREAD_SERIALIZE >> > -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT >> > -D APR_HAS_OTHER_CHILD >> > -D AP_HAVE_RELIABLE_PIPED_LOGS >> > -D DYNAMIC_MODULE_LIMIT=128 >> > -D HTTPD_ROOT="/etc/apache2" >> > -D SUEXEC_BIN="/usr/lib/apache2/suexec" >> > -D DEFAULT_PIDLOG="/var/run/apache2.pid" >> > -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" >> > -D DEFAULT_LOCKFILE="/var/run/apache2/accept.lock" >> > -D DEFAULT_ERRORLOG="logs/error_log" >> > -D AP_TYPES_CONFIG_FILE="mime.types" >> > -D SERVER_CONFIG_FILE="apache2.conf" >> > >> > >> > Any help is very much appreaciated. >> > >> > Thank you. >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] The table 'ports-state' is full
by Adam Armstrong 02 Mar '13

02 Mar '13

You need to increase php memory then :-) With 10k ports its probably running out of memory there too. Adam. Ciro Iriarte <cyruspy(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

The table 'ports-state' is full
by Ciro Iriarte 01 Mar '13

01 Mar '13

Hi!, does anybody recognized this error?, comments?. Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

2 3

Web UI doesn't show
by orznew orznew 01 Mar '13

01 Mar '13

Dear All, I need some help for installing observium in Ubuntu 12.04. I've followed the manual in the website for the installation and everything went smooth until I actually want to deploy the web UI. I've managed to add in the device and had paste the code listed in the page to /etc/apache2/sites-available/default. But when I access the website, it shows nothing but error message saying that nothing has been found. I've checked my apache2 error log and it says "File does not exist: /etc/apache2/htdocs". I have another website in the server as well, does it have a problem with something else hosted in it? Below is the result I get from apache2 -V: apache2 -V Server version: Apache/2.2.22 (Ubuntu) Server built: Nov 8 2012 21:37:36 Server's Module Magic Number: 20051115:30 Server loaded: APR 1.4.6, APR-Util 1.3.12 Compiled using: APR 1.4.6, APR-Util 1.3.12 Architecture: 64-bit Server MPM: ITK threaded: no forked: yes (variable process count) Server compiled with.... -D APACHE_MPM_DIR="server/mpm/experimental/itk" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=128 -D HTTPD_ROOT="/etc/apache2" -D SUEXEC_BIN="/usr/lib/apache2/suexec" -D DEFAULT_PIDLOG="/var/run/apache2.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_LOCKFILE="/var/run/apache2/accept.lock" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="mime.types" -D SERVER_CONFIG_FILE="apache2.conf" Any help is very much appreaciated. Thank you.

2 4

Hide Device Alerts header
by Maarten De Wispelaere 28 Feb '13

28 Feb '13

Hey, As a cosmetic improvement to the overview page: might be interesting to hide the "device alerts" title & table header, when no such alerts are active ? Nothing critical of course, but seems like an improvement to me ? BTW : new style = LOVE IT :) Thanks for all the good work Regards, Maarten De Wispelaere

1 0

RANCID config data
by Aaron Mayfield 28 Feb '13

28 Feb '13

Just svn upped to latest version, and now RANCID tab doesn't show config. Has anyone else seen this issue? I just checked the config on a device before I updated and everything was working properly. Now all my devices still show the config tab, but no actual config data: [cid:image001.jpg@01CE14F1.5C0469B0] Anyone else had this issue or is it something local to my system? Thanks

3 4

Interface down warning
by Adam Summerfield 27 Feb '13

27 Feb '13

Appears that in version 3668 that disabling this warning is no longer working? $config['warn']['ifdown'] = false; Regards, Adam

2 2

[patch] postfix graphs
by Dennis Kruyt 27 Feb '13

27 Feb '13

Hi, We added postfix mailqueue and spam/virus total stats trough check_mk, see for files https://dl.dropbox.com/u/578333/postfix-observium.tgz best regards, Dennis Kruyt,-

2 1

More interface modernisation
by Adam Armstrong 26 Feb '13

26 Feb '13

Afternoon All, We're doing more work on the interface at the moment, trying to shrink down the header and updating the icons and style : http://alpha.memetic.org/~adama/snaps/v3qpy738r4.png Comments? Thanks, adam.

7 17

scan only specific OID
by noruni at gmail 26 Feb '13

26 Feb '13

Hello there on a bras, there a a lot of virtual-interfaces which disapear when session is off (pppoe, dhcp etc...) is it possible to configure scripts or poller to scan only specific known physical interfaces only? Thanks for any solution. Noru

3 2

Fwd: Observium 0.13.2.3623 has been released [Freecode]
by Alex Vitola 25 Feb '13

25 Feb '13

what changes were made in relation to the Force10? att Alex Vitola > ---------- Forwarded message ---------- > From: Freecode <noreply(a)freecode.com> > Date: 2013/2/22 > Subject: Observium 0.13.2.3623 has been released [Freecode] > To: alex.vitola(a)gmail.com > > > Dear Observium follower, > > aarmstrong just announced version 0.13.2.3623 of Observium on Freecode. > > The release notes for this version are as follows: > > There is a new replacement front-page dashboard with a pretty geographical map > to visualize device status. There are fixes to netscaler support, further > migration of the GUI to bootstrap, the addition of polling support for > JUNIPER-DOM-MIB DOM sensors, and improved Force10 support. > > Project description: > > Observium is an autodiscovering network monitoring system focused primarily on > Cisco and Linux networks but includes support for a wide range of network > hardware and operating systems. Observium has grown out of a lack of easy to use > NMSes. It is intended to provide a more navigable interface to the health and > performance of your network. Its design goals include collecting as much > historical data about devices as possible, being completely autodiscovered with > little or no manual intervention, and having a very intuitive interface. > > Detailed history and release notes are available here: > > http://freecode.com/projects/observium#release_352481 > > If you want to unfollow this project, please log in to: > > http://freecode.com/account/subscriptions > > Best regards, > Freecode > > -- > This email was sent to alex.vitola(a)gmail.com. > > Geeknet, Inc. | 594 Howard Street, Suite 300 | San Francisco, CA 94105 > Privacy Policy: http://geek.net/privacy-statement -- Atenciosamente, Roberto Bertó roberto.berto(a)corp.tehospedo.com.br Desenvolve Soluções de Internet Ltda Rua Marechal Floriano Peixoto, 185/6º andar - Centro Porto Alegre/RS - CEP 90020-061 http://www.Desenvolve.com.br 51 9666-1509 | 51 3301-1420 LinkedIn | Twitter

2 2

Re: [Observium] Not able to resolve IP although able to ping and snmpget
by Afif 24 Feb '13

24 Feb '13

Adam, Daniel, Thanks you. It does make sense now. It's working fine. Regards, Afif On Sat, Feb 23, 2013 at 7:57 PM, <observium-request(a)observium.org> wrote: > > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: Not able to resolve IP although able to ping and snmpget > (Daniel Preussker) > 2. Re: Not able to resolve IP although able to ping and snmpget > (Adam Armstrong) > 3. Re: Devices rebooted? (observium(a)velder.li) > 4. Re: Devices rebooted? (Wouter Prins) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 23 Feb 2013 08:19:18 +0100 > From: Daniel Preussker <daniel(a)preussker.net> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Not able to resolve IP although able to ping > and snmpget > Message-ID: <7B2F7DE4-A290-4417-B645-DC474AA14C59(a)preussker.net> > Content-Type: text/plain; charset="us-ascii" > > Hi, > > you have to provide Hostnames, not IPs. > > > > Regards, > > Daniel Preussker > > [ Security Consultant, Network & Protocol Security and Cryptography > [ LPI & Novell Certified Linux Engineer and Researcher > [ +49 178 600 96 30 > [ Daniel(a)Preussker.Net > [ http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x87E736968E490AA1 > > On 23.02.2013, at 08:13, Afif wrote: > > > Hello, > > > > I have a few IP which I am able to get the SNMP and it showing alive but observium not able to resolve. Below are the output: > > > > > > <image.png> > > > > <image.png> > > Anything else I should check? Please advice. Thanks. > > > > Regards, > > Afif > > _______________________________________________ > > observium mailing list > > observium(a)observium.org > > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >

1 0

Re: [Observium] Devices rebooted?
by Adam Armstrong 24 Feb '13

24 Feb '13

Mike, Unix hosts prefer to use uptime from the agent array populated by the unix-agent module. If this exists, it should override all :-) Mike Stupalov <landy2005(a)gmail.com> wrote: >Hi guys, > > please update to last revision. > >I think the reason a small correction uptime for some devices (mostly >network), where preferred SNMP-FRAMEWORK-MIB::snmpEngineTime.0 But for >unix boxes preferred used HOST-RESOURCES-MIB::hrSystemUptime.0 >I returned to the old behavior, but with some improvements. > >On Sat, Feb 23, 2013 at 4:48 PM, Wouter Prins <wp(a)null0.nl> wrote: >> Seeing the same thing here, I just svn-ed to 3631 and observium eventlog >> says most linux boxes rebooted, while they didn't. :) >> >> >> On 23 February 2013 13:38, <observium(a)velder.li> wrote: >>> >>> Problem solved with restoring snapshot from 20.02.2013. From 21 on the >>> problem is appearing >>> >>> >>> >>> Am 23.02.2013 02:55, schrieb Adam Armstrong: >>> >>>> But thus far it appears not to be happening to anyone else. >>>> >>>> Adam. >>>> >>>> observium(a)velder.li wrote: >>>> >>>>> It appears on different hardware/software.. For now i reverted to >>>>> backup from 19.02.2013 (daily incremental). We will see... >>>>> >>>>> >>>>> >>>>> Am 23.02.2013 01:22, schrieb Adam Armstrong: >>>>>> >>>>>> I can't replicate it and I can't see why it's happening, unless your >>>>>> agent >>>>>> is randomly becoming unreachable. >>>>>> >>>>>> Also, no one else is reporting the problem. >>>>>> >>>>>> adam. >>>>>> >>>>>> >>>>>> On Sat, 23 Feb 2013 02:09:01 +0100, observium(a)velder.li wrote: >>>>>>> >>>>>>> Unfourtinately, i don't have additional infos in the logfile :( Do >>>>>>> you >>>>>>> need more infos from somewhere else? >>>>>>> >>>>>>> Regards, >>>>>>> Patrick >>>>>>> >>>>>>> >>>>>>> Am 23.02.2013 01:15, schrieb Adam Armstrong: >>>>>>>> >>>>>>>> Very helpful debugging. Thanks. >>>>>>>> >>>>>>>> On Sat, 23 Feb 2013 01:59:35 +0100, observium(a)velder.li wrote: >>>>>>>>> >>>>>>>>> Still """rebooting""". Few days ago, i hadn't that problem :( >>>>>>>>> Think >>>>>>>>> it's because svn update.. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Am 22.02.2013 21:05, schrieb Adam Armstrong: >>>>>>>>>> >>>>>>>>>> svn up. I've added logging for unix agent connection failures to >>>>>>>>>> the >>>>>>>>>> observium.log >>>>>>>>>> >>>>>>>>>> root@alpha:/home/observium/demo# grep agent observium.log >>>>>>>>>> Connection to UNIX agent on alpha.memetic.org:6556 failed. ERROR: >>>>>>>>>> 111 >>>>>>>>>> Connection refused >>>>>>>>>> Connection to UNIX agent on alpha.memetic.org:6556 failed. ERROR: >>>>>>>>>> 111 >>>>>>>>>> Connection refused >>>>>>>>>> Connection to UNIX agent on alpha.memetic.org:6556 failed. ERROR: >>>>>>>>>> 111 >>>>>>>>>> Connection refused >>>>>>>>>> root@alpha:/home/observium/demo# >>>>>>>>>> >>>>>>>>>> Could do with some timestamps too, maybe. :) >>>>>>>>>> >>>>>>>>>> adam. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Fri, 22 Feb 2013 21:53:41 +0100, observium(a)velder.li wrote: >>>>>>>>>>> >>>>>>>>>>> See uptime on Observium Host: >>>>>>>>>>> root@admin:~# uptime >>>>>>>>>>> 21:51:48 up 60 days, 21:27, 1 user, load average: 0.00, >>>>>>>>>>> 0.00, >>>>>>>>>>> 0.00 >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Uptime of "accesspoint" >>>>>>>>>>> root@accesspoint:~# uptime >>>>>>>>>>> 21:52:17 up 12 days, 42 min, load average: 0.03, 0.03, 0.04 >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Uptime uf "ns3" >>>>>>>>>>> root@ns3:~# uptime >>>>>>>>>>> 21:52:37 up 64 days, 7:39, 1 user, load average: 0.00, >>>>>>>>>>> 0.00, >>>>>>>>>>> 0.00 >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> "accesspoint" is about 5km from the observium host, site to site >>>>>>>>>>> vpn.. >>>>>>>>>>> ns3 directly over internet, 6400km. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Am 22.02.2013 20:58, schrieb Adam Armstrong: >>>>>>>>>>>> >>>>>>>>>>>> that uptime comes from /proc/uptime, i think it's quite >>>>>>>>>>>> reliable: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>> >>>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> http://demo.observium.org/graphs/type=device_uptime/device=6/to=1361566071/… >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Is it possible that your agent is failing to connect? Is the >>>>>>>>>>>> host >>>>>>>>>>>> in >>>>>>>>>>>> question far away from the observium server? >>>>>>>>>>>> >>>>>>>>>>>> adam. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Fri, 22 Feb 2013 21:34:18 +0100, observium(a)velder.li wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> Hi Adam >>>>>>>>>>>>> >>>>>>>>>>>>> www-data@admin:~/observium.mydomain.ch$ ./poller.php -h 6 -m >>>>>>>>>>>>> unix-agent,system -d| grep uptime >>>>>>>>>>>>> RRD[update >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> /var/www/observium.mydomain.ch/rrd/admin.mydomain.ch/uptime.rrd >>>>>>>>>>>>> N:5183936] Uptime: 59 days, 23h 58m 56s >>>>>>>>>>>>> [uptime] => 5183936 >>>>>>>>>>>>> SQL[UPDATE `devices` set `uptime` ='5183936',`last_polled` >>>>>>>>>>>>> =NOW(),`last_polled_timetaken` ='0.053' WHERE `device_id` = >>>>>>>>>>>>> '6'] >>>>>>>>>>>>> UPDATED! >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Am 22.02.2013 20:37, schrieb Adam Armstrong: >>>>>>>>>>>>>> >>>>>>>>>>>>>> For example: >>>>>>>>>>>>>> >>>>>>>>>>>>>> root@alpha:/home/observium/demo# ./poller.php -h 6 -m >>>>>>>>>>>>>> unix-agent,system -d >>>>>>>>>>>>>> | grep uptime >>>>>>>>>>>>>> (root,7688,836,0.0) grep --color=auto uptime >>>>>>>>>>>>>> [uptime] => 20405260.06 64091168.44 >>>>>>>>>>>>>> RRD[update >>>>>>>>>>>>>> /mnt/ramdisk/observium_demo/alpha.memetic.org/uptime.rrd >>>>>>>>>>>>>> N:20405260] Uptime: 236 days, 4h 7m 40s >>>>>>>>>>>>>> [uptime] => 20405260 >>>>>>>>>>>>>> SQL[UPDATE `devices` set `uptime` ='20405260',`last_polled` >>>>>>>>>>>>>> =NOW(),`last_polled_timetaken` ='0.483' WHERE `device_id` = >>>>>>>>>>>>>> '6'] >>>>>>>>>>>>>> UPDATED! >>>>>>>>>>>>>> root@alpha:/home/observium/demo# >>>>>>>>>>>>>> >>>>>>>>>>>>>> adam. >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Fri, 22 Feb 2013 21:23:54 +0100, observium(a)velder.li >>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> No, it's on multiple devices, and snmpd is running since >>>>>>>>>>>>>>> last >>>>>>>>>>>>>>> reboot. >>>>>>>>>>>>>>> Poller has different values than Graph, "uptime" on system, >>>>>>>>>>>>>>> devices >>>>>>>>>>>>>>> page >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>>> ;) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Am 22.02.2013 21:20, schrieb Mark Chaney: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Its just probably stupid snmpd restarting or saying that >>>>>>>>>>>>>>>> they >>>>>>>>>>>>>>>> did. >>>>>>>>>>>>>>>> Nothing you can really do about that. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On 2013-02-22 14:09, observium(a)velder.li wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Hi there >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> just saw that observium says that many devices were >>>>>>>>>>>>>>>>> rebooted >>>>>>>>>>>>>>>>> today. >>>>>>>>>>>>>>>>> But that's not true. See Screenshot. Is that a bug? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Regards >>>>>>>>>>>>>>>>> Patrick >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>>> observium mailing list >>>>>>>>>>>>>>>>> observium(a)observium.org >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>> observium mailing list >>>>>>>>>>>>>>>> observium(a)observium.org >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>> observium mailing list >>>>>>>>>>>>>>> observium(a)observium.org >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>>>>>>>> >>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>> observium mailing list >>>>>>>>>>>>>> observium(a)observium.org >>>>>>>>>>>>>> >>>>>>>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>>>>>>> >>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>> observium mailing list >>>>>>>>>>>>> observium(a)observium.org >>>>>>>>>>>>> >>>>>>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>>>>>> >>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> observium mailing list >>>>>>>>>>>> observium(a)observium.org >>>>>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>>>>> >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> observium mailing list >>>>>>>>>>> observium(a)observium.org >>>>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> observium mailing list >>>>>>>>>> observium(a)observium.org >>>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> observium mailing list >>>>>>>> observium(a)observium.org >>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>> >>>>>>> _______________________________________________ >>>>>>> observium mailing list >>>>>>> observium(a)observium.org >>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>> >>>>>> _______________________________________________ >>>>>> observium mailing list >>>>>> observium(a)observium.org >>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>> >>>>> _______________________________________________ >>>>> observium mailing list >>>>> observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> >> >> -- >> Wouter Prins >> wp(a)null0.nl >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > > > >-- >Майк. >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

Re: [Observium] Devices rebooted?
by Adam Armstrong 23 Feb '13

23 Feb '13

But thus far it appears not to be happening to anyone else. Adam. observium(a)velder.li wrote: >It appears on different hardware/software.. For now i reverted to >backup from 19.02.2013 (daily incremental). We will see... > > > >Am 23.02.2013 01:22, schrieb Adam Armstrong: >> I can't replicate it and I can't see why it's happening, unless your >> agent >> is randomly becoming unreachable. >> >> Also, no one else is reporting the problem. >> >> adam. >> >> >> On Sat, 23 Feb 2013 02:09:01 +0100, observium(a)velder.li wrote: >>> Unfourtinately, i don't have additional infos in the logfile :( Do >>> you >>> need more infos from somewhere else? >>> >>> Regards, >>> Patrick >>> >>> >>> Am 23.02.2013 01:15, schrieb Adam Armstrong: >>>> Very helpful debugging. Thanks. >>>> >>>> On Sat, 23 Feb 2013 01:59:35 +0100, observium(a)velder.li wrote: >>>>> Still """rebooting""". Few days ago, i hadn't that problem :( >>>>> Think >>>>> it's because svn update.. >>>>> >>>>> >>>>> >>>>> Am 22.02.2013 21:05, schrieb Adam Armstrong: >>>>>> svn up. I've added logging for unix agent connection failures to >>>>>> the >>>>>> observium.log >>>>>> >>>>>> root@alpha:/home/observium/demo# grep agent observium.log >>>>>> Connection to UNIX agent on alpha.memetic.org:6556 failed. ERROR: >>>>>> 111 >>>>>> Connection refused >>>>>> Connection to UNIX agent on alpha.memetic.org:6556 failed. ERROR: >>>>>> 111 >>>>>> Connection refused >>>>>> Connection to UNIX agent on alpha.memetic.org:6556 failed. ERROR: >>>>>> 111 >>>>>> Connection refused >>>>>> root@alpha:/home/observium/demo# >>>>>> >>>>>> Could do with some timestamps too, maybe. :) >>>>>> >>>>>> adam. >>>>>> >>>>>> >>>>>> On Fri, 22 Feb 2013 21:53:41 +0100, observium(a)velder.li wrote: >>>>>>> See uptime on Observium Host: >>>>>>> root@admin:~# uptime >>>>>>> 21:51:48 up 60 days, 21:27, 1 user, load average: 0.00, >>>>>>> 0.00, >>>>>>> 0.00 >>>>>>> >>>>>>> >>>>>>> Uptime of "accesspoint" >>>>>>> root@accesspoint:~# uptime >>>>>>> 21:52:17 up 12 days, 42 min, load average: 0.03, 0.03, 0.04 >>>>>>> >>>>>>> >>>>>>> Uptime uf "ns3" >>>>>>> root@ns3:~# uptime >>>>>>> 21:52:37 up 64 days, 7:39, 1 user, load average: 0.00, >>>>>>> 0.00, >>>>>>> 0.00 >>>>>>> >>>>>>> >>>>>>> "accesspoint" is about 5km from the observium host, site to site >>>>>>> vpn.. >>>>>>> ns3 directly over internet, 6400km. >>>>>>> >>>>>>> >>>>>>> >>>>>>> Am 22.02.2013 20:58, schrieb Adam Armstrong: >>>>>>>> that uptime comes from /proc/uptime, i think it's quite >>>>>>>> reliable: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>> >>>>>> >>>> >>>> >> >> http://demo.observium.org/graphs/type=device_uptime/device=6/to=1361566071/… >>>>>>>> >>>>>>>> Is it possible that your agent is failing to connect? Is the >>>>>>>> host >>>>>>>> in >>>>>>>> question far away from the observium server? >>>>>>>> >>>>>>>> adam. >>>>>>>> >>>>>>>> >>>>>>>> On Fri, 22 Feb 2013 21:34:18 +0100, observium(a)velder.li wrote: >>>>>>>>> Hi Adam >>>>>>>>> >>>>>>>>> www-data@admin:~/observium.mydomain.ch$ ./poller.php -h 6 -m >>>>>>>>> unix-agent,system -d| grep uptime >>>>>>>>> RRD[update >>>>>>>>> >>>>>>>>> /var/www/observium.mydomain.ch/rrd/admin.mydomain.ch/uptime.rrd >>>>>>>>> N:5183936] Uptime: 59 days, 23h 58m 56s >>>>>>>>> [uptime] => 5183936 >>>>>>>>> SQL[UPDATE `devices` set `uptime` ='5183936',`last_polled` >>>>>>>>> =NOW(),`last_polled_timetaken` ='0.053' WHERE `device_id` = >>>>>>>>> '6'] >>>>>>>>> UPDATED! >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Am 22.02.2013 20:37, schrieb Adam Armstrong: >>>>>>>>>> For example: >>>>>>>>>> >>>>>>>>>> root@alpha:/home/observium/demo# ./poller.php -h 6 -m >>>>>>>>>> unix-agent,system -d >>>>>>>>>> | grep uptime >>>>>>>>>> (root,7688,836,0.0) grep --color=auto uptime >>>>>>>>>> [uptime] => 20405260.06 64091168.44 >>>>>>>>>> RRD[update >>>>>>>>>> /mnt/ramdisk/observium_demo/alpha.memetic.org/uptime.rrd >>>>>>>>>> N:20405260] Uptime: 236 days, 4h 7m 40s >>>>>>>>>> [uptime] => 20405260 >>>>>>>>>> SQL[UPDATE `devices` set `uptime` ='20405260',`last_polled` >>>>>>>>>> =NOW(),`last_polled_timetaken` ='0.483' WHERE `device_id` = >>>>>>>>>> '6'] >>>>>>>>>> UPDATED! >>>>>>>>>> root@alpha:/home/observium/demo# >>>>>>>>>> >>>>>>>>>> adam. >>>>>>>>>> >>>>>>>>>> On Fri, 22 Feb 2013 21:23:54 +0100, observium(a)velder.li >>>>>>>>>> wrote: >>>>>>>>>>> No, it's on multiple devices, and snmpd is running since >>>>>>>>>>> last >>>>>>>>>>> reboot. >>>>>>>>>>> Poller has different values than Graph, "uptime" on system, >>>>>>>>>>> devices >>>>>>>>>>> page >>>>>>>>>> >>>>>>>>>>> ;) >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Am 22.02.2013 21:20, schrieb Mark Chaney: >>>>>>>>>>>> Its just probably stupid snmpd restarting or saying that >>>>>>>>>>>> they >>>>>>>>>>>> did. >>>>>>>>>>>> Nothing you can really do about that. >>>>>>>>>>>> >>>>>>>>>>>> On 2013-02-22 14:09, observium(a)velder.li wrote: >>>>>>>>>>>>> Hi there >>>>>>>>>>>>> >>>>>>>>>>>>> just saw that observium says that many devices were >>>>>>>>>>>>> rebooted >>>>>>>>>>>>> today. >>>>>>>>>>>>> But that's not true. See Screenshot. Is that a bug? >>>>>>>>>>>>> >>>>>>>>>>>>> Regards >>>>>>>>>>>>> Patrick >>>>>>>>>>>>> >>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>> observium mailing list >>>>>>>>>>>>> observium(a)observium.org >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> observium mailing list >>>>>>>>>>>> observium(a)observium.org >>>>>>>>>>>> >>>>>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> observium mailing list >>>>>>>>>>> observium(a)observium.org >>>>>>>>>>> >>>>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>>>> _______________________________________________ >>>>>>>>>> observium mailing list >>>>>>>>>> observium(a)observium.org >>>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>>> _______________________________________________ >>>>>>>>> observium mailing list >>>>>>>>> observium(a)observium.org >>>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>>> _______________________________________________ >>>>>>>> observium mailing list >>>>>>>> observium(a)observium.org >>>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>>> _______________________________________________ >>>>>>> observium mailing list >>>>>>> observium(a)observium.org >>>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>> _______________________________________________ >>>>>> observium mailing list >>>>>> observium(a)observium.org >>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 3