- observium - lists.observium.org

Not able to resolve IP although able to ping and snmpget
by Afif 23 Feb '13

23 Feb '13

Hello, I have a few IP which I am able to get the SNMP and it showing alive but observium not able to resolve. Below are the output: [image: Inline image 2] [image: Inline image 3] Anything else I should check? Please advice. Thanks. Regards, Afif

3 2

Devices rebooted?
by observium＠velder.li 23 Feb '13

23 Feb '13

Hi there just saw that observium says that many devices were rebooted today. But that's not true. See Screenshot. Is that a bug? Regards Patrick

4 18

Ipoman feature request
by ColoCenter bv 22 Feb '13

22 Feb '13

Hi all, It is possible to give a user access to a port on for example a switch. But you can't give them specific access to a sensor. With the ipoman for example i would like to give a user access to a specific sensor, so they can monitor their powerport and their ampere consumption. Would it be possible to implement this in the authentication protocol? -- Alexander Lantink ColoCenter bv http://www.colocenter.nl info(a)colocenter.nl

1 0

Device up/down conditions
by Chris Moody 22 Feb '13

22 Feb '13

Can someone help me understand the algorithm/conditions that will cause a device to be flagged up/down in Observium? Reason I ask is I'm seeing instances where devices will get flagged as 'down' however when I login to the Observium host and manually test via fping/snmpwalk, I get valid responses back. The devices come back a few minutes later. I don't see anything in observium.log aside from poller completion results, so I could use some more info/ideas to help debug why these devices keep going offline intermittently. Cheers, -Chris

2 2

Clean Install
by ServisTURK-İlkay Karadam 22 Feb '13

22 Feb '13

Hi all, Can anyone offer me a clean installation documents. Thanks. Pc. I know the http://www.observium.org/wiki/RHEL_SVN_Installation . Alternatives please.

3 2

test
by Nikolay Shopik 22 Feb '13

22 Feb '13

please ignore

2 1

Feature request
by Mike Richardson 22 Feb '13

22 Feb '13

Hiya, I'd like to make a feature request. It's a slight modification really. In the User Management -> Edit User section you can grant a user access to a device by selecting a device from a drop down box. Would it be possible to change this from a single select to a multi-select box please? We may have to add over a hundred devices to several users. A multi-select would reduce this work from mind-numbing to merely tedious. Thanks, Mike -- Mike Richardson Networks (network(a)manchester.ac.uk) IT Services, University of Manchester *Plain text only please - attachments stripped on arrival*

1 0

RANCID integration
by Florian Hibler 21 Feb '13

21 Feb '13

Hi everyone, just would like to know, if there is already a "just undocumented" RANCID integration for Observium? I found a list point in the docu wiki, so I am just curious about. You guys do a great job, btw! Best regards, Florian

4 3

Graphs stopped working
by Tom Taylor 20 Feb '13

20 Feb '13

Hi there, I was wondering if anyone's got an idea as to why graphs would suddenly stop working? (see attachment) I hadn't updated anything or changed anything, the rrd's all have data in. It's running off Centos 6.2 Any ideas on how to troubleshoot? [cid:18152FC1-6ED1-47C0-8A4D-DC5CBEF4B7BF@mill-ny.com]

2 2

Latency Tab
by Alex Vitola 20 Feb '13

20 Feb '13

how to enable latency tab for a device? http://demo.observium.org/device/device=6/tab=latency/

3 3

ifAlias fix
by Daniel Preussker 20 Feb '13

20 Feb '13

Hi, I came across a design flaw in ifAlias. First of all the flaw: declare -a INTERFACES=($(ip l|grep mtu|cut -d: -f2|sed s/\ //g)) ... INTERFACE=$(echo ${INTERFACES[$INDEX]}|cut -d@ -f1) The Interface INDEX is rarely equal to the indexes of the array. Thus getting all interfaces here is useless, we already get the right Interface ID from SNMPd, so the fix is: #declare -a INTERFACES=($(ip l|grep mtu|cut -d: -f2|sed s/\ //g)) ... #INTERFACE=$(echo ${INTERFACES[$INDEX]}|cut -d@ -f1) INTERFACE=$((ip l | grep "^${ID}: " | cut -d " " -f 2 | sed 's/://g') 2> /dev/null) This way, even when tap* respawns with a new INDEX it will still be mapped to the right Description and Alias. A 2nd bug has been spotted in snmpbulkwalk vs snmpwalk; snmpbulkwalk -QOUs [...] ifAlias leaves out some descriptions but snmpwalk does not, needs further investigation for now I just hacked the snmp.inc.php... Kind Regards, Daniel Preussker [ Security Consultant, Network & Protocol Security and Cryptography [ LPI & Novell Certified Linux Engineer and Researcher [ +49 178 600 96 30 [ Daniel(a)Preussker.Net [ http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x87E736968E490AA1

2 3

Update to stable release 3598.
by Alex Vitola 18 Feb '13

18 Feb '13

This week I made the upgrade to the latest release Observium. I noticed a graph clearer. And not in a legend of what can be.

2 1

BGP Alerts
by Tobias Brunner 18 Feb '13

18 Feb '13

Hi, Observium only logs when a BGP session goes up, but not when a session goes down. Is this a bug or can this be configured somewhere? Cheers, Tobias -- Nine Internet Solutions AG, Albisriederstr. 243a, CH-8047 Zuerich Support +41 44 637 40 40 | Tel +41 44 637 40 00 | Direct +41 44 637 40 13 Skype nine.ch_support

1 1

Clean install - SQL Schema errors
by Ciro Iriarte 17 Feb '13

17 Feb '13

I noticed that there are several errors running the schema creation on a clean/fresh install. Managed to run it without errors after a quick review and posted a patch at http://jira.observium.org/browse/OBSERVIUM-219 Some files even "errored" on the first line so maybe many changes never got to the database in production installations, any ideas about how to check schema "consistency"?. Missing indexes for example would never be noticed in small installations.. Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

1 0

Observium developer meetin
by Adam Armstrong 17 Feb '13

17 Feb '13

Hi Guys, We recorded our most recent dev meeting, and thought some of you might be interested. http://meemsy.com/v/5726 It's probably of particular interest to people who want to use git and/or nginx :) Thanks, adam.

4 3

Re: [Observium] ARP Table empty
by Adam Armstrong 15 Feb '13

15 Feb '13

It requires SNMP contexts, which are a pain. We've been wary of using them because then can cause huge poller delays on devices which don't support them. Adam. Tobias Brunner <tobias.brunner(a)nine.ch> wrote: >Hi, > >Thanks for the answer... > >The "Switchmap"-Project (http://sourceforge.net/projects/switchmap/) is able >to pull out the MAC address table from Cisco switches. It would be really nice >if Observium would be able to do it too, so I don't need to have that many >tools =) >I tried to see how Switchmap is doing it, but I did have some troubles >understanding it =( > >Cheers, >Tobias > >On Friday 15 February 2013 12:05:08 Nikolay Shopik wrote: >> arp table is different, if you want "show mac address-table" Cisco >> doesn't support q-bridge-mib, which is need to show you this kind >> information. >> >> On 15/02/13 11:48, Tobias Brunner wrote: >> > Hi list, >> > >> > The "ARP Table" on all ports is empty (f.e. >> > /device/device=95/tab=port/port=13844/view=arp/), I'm wondering why... >> > Shouldn't there be listed all MAC addresses in the MAC address table >> > ("show >> > mac address-table")? Or is this really just the MAC<->IP table? If yes, >> > are >> > MAC addresses tables saved in the Observium database to see which MAC >> > address is on which switchport? >> > Looking at the "ARP Table" from all Ports (f.e. >> > /device/device=95/tab=ports/view=arp/) there are MAC adresses which >> > belongs to an IP address. >> > >> > All devices are Cisco Switches or Brocade Router. >> > >> > Cheers, >> > Tobias >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >-- >Nine Internet Solutions AG, Albisriederstr. 243a, CH-8047 Zuerich >Support +41 44 637 40 40 | Tel +41 44 637 40 00 | Direct +41 44 637 40 13 >Skype nine.ch_support >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

Graphics in jpg instead of png
by Alex Vitola 15 Feb '13

15 Feb '13

I can generate the graphics in jpg instead of png? att Alex Vitola

4 4

Re: [Observium] ARP Table empty
by Adam Armstrong 15 Feb '13

15 Feb '13

We could use device attributes to disable it if it fails. But that might trigger if the device went down mid-poll :-\ Adam. Tom Laermans <tom.laermans(a)powersource.cx> wrote: >Maybe disable the module globally and then enable for devices which do? > >Or bail out after the first VLAN time out or so? > >Tom > >On 15/02/2013 16:17, Adam Armstrong wrote: >> It requires SNMP contexts, which are a pain. We've been wary of using them because then can cause huge poller delays on devices which don't support them. >> >> Adam. >> >> Tobias Brunner <tobias.brunner(a)nine.ch> wrote: >> >>> Hi, >>> >>> Thanks for the answer... >>> >>> The "Switchmap"-Project (http://sourceforge.net/projects/switchmap/) is able >>> to pull out the MAC address table from Cisco switches. It would be really nice >>> if Observium would be able to do it too, so I don't need to have that many >>> tools =) >>> I tried to see how Switchmap is doing it, but I did have some troubles >>> understanding it =( >>> >>> Cheers, >>> Tobias >>> >>> On Friday 15 February 2013 12:05:08 Nikolay Shopik wrote: >>>> arp table is different, if you want "show mac address-table" Cisco >>>> doesn't support q-bridge-mib, which is need to show you this kind >>>> information. >>>> >>>> On 15/02/13 11:48, Tobias Brunner wrote: >>>>> Hi list, >>>>> >>>>> The "ARP Table" on all ports is empty (f.e. >>>>> /device/device=95/tab=port/port=13844/view=arp/), I'm wondering why... >>>>> Shouldn't there be listed all MAC addresses in the MAC address table >>>>> ("show >>>>> mac address-table")? Or is this really just the MAC<->IP table? If yes, >>>>> are >>>>> MAC addresses tables saved in the Observium database to see which MAC >>>>> address is on which switchport? >>>>> Looking at the "ARP Table" from all Ports (f.e. >>>>> /device/device=95/tab=ports/view=arp/) there are MAC adresses which >>>>> belongs to an IP address. >>>>> >>>>> All devices are Cisco Switches or Brocade Router. >>>>> >>>>> Cheers, >>>>> Tobias >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> -- >>> Nine Internet Solutions AG, Albisriederstr. 243a, CH-8047 Zuerich >>> Support +41 44 637 40 40 | Tel +41 44 637 40 00 | Direct +41 44 637 40 13 >>> Skype nine.ch_support >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

ARP Table empty
by Tobias Brunner 15 Feb '13

15 Feb '13

Hi list, The "ARP Table" on all ports is empty (f.e. /device/device=95/tab=port/port=13844/view=arp/), I'm wondering why... Shouldn't there be listed all MAC addresses in the MAC address table ("show mac address-table")? Or is this really just the MAC<->IP table? If yes, are MAC addresses tables saved in the Observium database to see which MAC address is on which switchport? Looking at the "ARP Table" from all Ports (f.e. /device/device=95/tab=ports/view=arp/) there are MAC adresses which belongs to an IP address. All devices are Cisco Switches or Brocade Router. Cheers, Tobias -- Nine Internet Solutions AG, Albisriederstr. 243a, CH-8047 Zuerich Support +41 44 637 40 40 | Tel +41 44 637 40 00 | Direct +41 44 637 40 13 Skype nine.ch_support

3 4

Integration with NFSEN
by Ariyanto Dewo 14 Feb '13

14 Feb '13

Hi, I’ve been evaluating observium for almost 6 months now and in general I’m really happy J. But I read in the manual that nfsen can be integrated with nfsen data, I’ve followed the manual but still nfsen data not shown in observium. Is there anything I missed? Thanks. Rgds, -dewo-

3 3

Traffic realtime is not wotks
by Денис Хаба ров 14 Feb '13

14 Feb '13

Hi all. I using observium on debian+nginx+php-fpm. Recently I noticed that I do not work schedule traffic realtime. Instead of traffic data says: cannot get data about interface 2 All other data in order. Please tell me what is wrong?

4 4

speed up the poller with poller-wrapper.py
by Job Snijders 14 Feb '13

14 Feb '13

Hi all, Are you not sleeping well because there are gaps in your graphs? Do you feel like your observium poller isn't putting enough effort into its sole task of polling every device and completing that task in less than 5 minutes? Fear not, a dirty script called "poller-wrapper.py" is here! I wrote a small wrapper that has a slightly more modern approach to getting things done. An issue with the multiple poller instances approach[1] is that when a single instance has to poll a few slow devices, that single instance cannot finish its work in time, while the instances that already finished their portion of the work will not 'help' the instance with the slow devices. This wrapper script will create a Queue with all the work that has to be done and launch a number of threads which will take work from the Queue until the queue is empty. This distributes the workload over the instances move evenly, thus improving performance and thus making it more likely to finish all the polling work within 5 minutes. You can easily test what number of threads works well with your environment by running the script a few times manually, here I run the script with 32 threads: root@observium:/opt/observium# python poller-wrapper.py 32 worker Thread-23 finished device 75 in 9 seconds worker Thread-25 finished device 84 in 2 seconds worker Thread-21 finished device 81 in 5 seconds <SNIP> worker Thread-23 finished device 98 in 81 seconds worker Thread-3 finished device 94 in 116 seconds worker Thread-32 finished device 93 in 126 seconds poller-wrapper polled 130 devices in 179 seconds with 32 workers root@observium:/opt/observium# Source: ------- URL: http://noc.as5580.net/~job/observium-poller-wrapper.py.txt Installation: ------------- cd /opt/observium wget http://noc.as5580.net/~job/observium-poller-wrapper.py.txt -O poller-wrapper.py Now open poller-wrapper.py with a text editor to change the database username & password. open /etc/cron.d/observium and replace this line: */5 * * * * root /opt/observium/poller.php -h all >> /dev/null 2>&1 with something like this: */5 * * * * root python /opt/observium/poller-wrapper.py 16 >> /dev/null 2>&1 Kind regards, Job Snijders Atrato IP Networks [1] http://www.observium.org/wiki/Performance_tuning#Multiple_poller_instances

3 3

Re: [Observium] no data in rrds
by Adam Armstrong 14 Feb '13

14 Feb '13

centos 5? Why? :'( Julian Rutz <mail(a)jurutz.com> wrote: >Hello, > >I just did a new installation of observium in our network and I pretty >much like it. > >Unfortunately, I do have the problem, that all graphs are empty while >f.ex. the temperature readings on the device overview page are fine. As >I figured, the RRD files seem the have only "NaN" values: > ><snip> > ><row><v>NaN</v><v>NaN</v><v>NaN</v><v>N >aN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v> >NaN</v></row> > ><row><v>NaN</v><v>NaN</v><v>NaN</v><v>N >aN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v> >NaN</v></row> ></snip> > >I am running Observium 0.13.2.3586 with RRDtool 1.4.7 on >2.6.18-348.1.1.el5.centos.plusPAE. > >Any help is appreciated. Thank you in advance. > >Kind regards, > >Julian >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 5

no data in rrds
by Julian Rutz 14 Feb '13

14 Feb '13

Hello, I just did a new installation of observium in our network and I pretty much like it. Unfortunately, I do have the problem, that all graphs are empty while f.ex. the temperature readings on the device overview page are fine. As I figured, the RRD files seem the have only "NaN" values: <snip>  <row><v>NaN</v><v>NaN</v><v>NaN</v><v>N aN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v> NaN</v></row>  <row><v>NaN</v><v>NaN</v><v>NaN</v><v>N aN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v>NaN</v><v> NaN</v></row> </snip> I am running Observium 0.13.2.3586 with RRDtool 1.4.7 on 2.6.18-348.1.1.el5.centos.plusPAE. Any help is appreciated. Thank you in advance. Kind regards, Julian

1 0

Configuration Step Required
by Ravindra Gupta 14 Feb '13

14 Feb '13

Dear Team, I have installed observium opensource using svn trunk in Linux system, when we have called webpage on url the page display totally blank. Can you provide me installation document for server side as well as client side.

4 4

Re: [Observium] Poller performance
by Adam Armstrong 14 Feb '13

14 Feb '13

Indeed, but I think its feature set is quite irrelevant here, and only likely to slow down rrd writing. Adam. Morgan McLean <wrx230(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Bug
by observium＠velder.li 13 Feb '13

13 Feb '13

Hi there i found a bug on the device page, see attachment. Regards

2 1

Re: [Observium] Filters from the all devices page not working
by Adam Armstrong 13 Feb '13

13 Feb '13

You can put /debug=yes/ on the URL and will see the SQL query :-) Erwin Botas <ebotas(a)criticalcolocation.com> wrote: >Hi, Trying to filter from the "All Devices" page and even that all data fields are shown once you apply the filter no device is shown in the result. > >Any clue? > >Can somebody crosscheck if this is a problem with my installation or a bug? > >Regards, > >Erwin Botas >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Filters from the all devices page not working
by Erwin Botas 13 Feb '13

13 Feb '13

Hi, Trying to filter from the "All Devices" page and even that all data fields are shown once you apply the filter no device is shown in the result. Any clue? Can somebody crosscheck if this is a problem with my installation or a bug? Regards, Erwin Botas

1 0

Install Observium in Windows
by mpat＠oteresearch.gr 13 Feb '13

13 Feb '13

Hello, is there anyway to install observium in Windows machine? Best Regards.

2 1

Re: [Observium] No Such Object available on this agent at this OID
by Tom Laermans 12 Feb '13

12 Feb '13

Hi, What is the issue here? Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Ravindra Gupta" <ravindragupta9(a)gmail.com> To: "Observium Network Observation System" <observium(a)observium.org>, <observium-subscribe(a)observium.org> Subject: [Observium] No Such Object available on this agent at this OID Date: Tue, Feb 12, 2013 14:06 Dear Team, We are facing "No Such Object available on this agent at this OID" issue when we are running "./poller.php -h hostname.com -d".Both the service i.e snmpd or snmptrapd running properly on server side as well as client side. Server Side logs: SQL[SELECT `ifIndex`,`port_id`,`ifDescr` FROM `ports` WHERE `device_id` = '8'] DEBUG: SNMP Auth options = -v2c -c public /usr/bin/snmpbulkwalk -v2c -c public -OQUs -m BRIDGE-MIB -M /opt/observium/mibs udphostname.com:161 dot1dBasePortIfIndex dot1dBasePortIfIndex = No Such Object available on this agent at this OID Remote side (hostname.com) logs: No Such Object available on this agent at this OID [root@hosrname ~]# snmpwalk -v 2c -c public localhost IP-MIB::ipAdEntIfIndex IP-MIB::ipAdEntIfIndex = No Such Object available on this agent at this OID

2 2

No Such Object available on this agent at this OID
by Ravindra Gupta 12 Feb '13

12 Feb '13

Dear Team, We are facing "No Such Object available on this agent at this OID" issue when we are running "./poller.php -h hostname.com -d".Both the service i.e snmpd or snmptrapd running properly on server side as well as client side. Server Side logs: SQL[SELECT `ifIndex`,`port_id`,`ifDescr` FROM `ports` WHERE `device_id` = '8'] DEBUG: SNMP Auth options = -v2c -c public /usr/bin/snmpbulkwalk -v2c -c public -OQUs -m BRIDGE-MIB -M /opt/observium/mibs udphostname.com:161 dot1dBasePortIfIndex dot1dBasePortIfIndex = No Such Object available on this agent at this OID Remote side (*hostname.com*) logs: No Such Object available on this agent at this OID [root@hosrname ~]# snmpwalk -v 2c -c public localhost IP-MIB::ipAdEntIfIndex IP-MIB::ipAdEntIfIndex = No Such Object available on this agent at this OID

1 0

IPMI Temperature
by observium＠velder.li 09 Feb '13

09 Feb '13

Hi there IPMI Temperature check doesn't work anymore on my SuperMicro 5017C-MTF machine (i think since i updated..) Is that a known bug? Regards, Patrick

1 0

Re: [Observium] Optical Monitoring (DOM/DDM) on Brocade Switches
by Adam Armstrong 08 Feb '13

08 Feb '13

I added support for juniper-dom-mib a week or two ago, the sensors go in the same table as the other sensors, and there's also a per-port sensors tab. Cisco enumerate all of their sensors in cisco-entity-sensor-mib, so that has been done for many years :-) Adam Morgan McLean <wrx230(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Optical Monitoring (DOM/DDM) on Brocade Switches
by Matthias Cramer 08 Feb '13

08 Feb '13

Hi All After my mail this morning I could not wait and implemented it. Attached are the 3 necessary file in a tgz archive. I should work on XMR/MLX/CER and probably CSR (probably others). It does deffenetly not work on RX and FWS. I'm in contact with Brocade to find out a solution to do the same on RX switches. @Adam: Would be very nice if you could include it in svn. Regards Matthias -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zürich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250

3 3

Optical Monitoring (DOM/DDM) on Brocade Switches
by Matthias Cramer 08 Feb '13

08 Feb '13

Hi All Has there already been an effort to implement Optical Monitoring for Brocade (or any other Vendor)? Would be relay nice to have some graphs of RX and TX power and the module temperature. Regards Matthias -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zürich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250

1 0

Hosting/server/device donation.
by Adam Armstrong 08 Feb '13

08 Feb '13

Hi All, We've had quite a few offers of hosting recently, so I thought I'd explain why we don't take them and give some suggestions on else people could do instead. Firstly, we don't accept offers of hosting for the websites and repository of the project because we don't want to be beholden to anyone who could change their minds. It would likely cause significant disruption if we were to have the plug pulled on a donated server out of the blue! One of the big problems with writing and maintaining something like Observium is that it's difficult to ensure that everything works after changes. As we refactor code and add new features, support for specific devices sometimes acquires bugs or simply stops working. So one of the things which would be helpful would be access to various kinds of devices to add to the http://demo.observium.org installation both to better advertise the features of Observium as well as making sure bugs are found more quickly. For example, thanks to the SNMP access to a 7200 recently provided by Crosstel, we'll soon fix some bugs that left the Cisco MAC accounting feature broken since we switched to using MySQL memory tables for state. :) Thanks, adam. (also, don't forget to give us all of your cash because we are awesome, ok?)

2 2

New front page format
by David Brodbeck 06 Feb '13

06 Feb '13

Just wanted to say that I really like the new front page format. Alerts are displayed much more compactly *and* with more useful information, which is a nice trick. I did turn off the map, though, since everything I monitor is at one site. -- David Brodbeck System Administrator, Linguistics University of Washington

1 0

Re: [Observium] Configuration Step Required
by Adam Armstrong 05 Feb '13

05 Feb '13

The application and Unix agent functionality is current in alpha, and not suitable for general use. If you can't make it work yourself, dont even try :-) Ravindra Gupta <ravindragupta9(a)gmail.com> wrote: >Dear Adam, > >Any application required from client side to lookup the server like >nrpe, nsclient etc. > >On 2/6/13, Ravindra Gupta <ravindragupta9(a)gmail.com> wrote: >> Thanks Adam. >> >> On Tue, Feb 5, 2013 at 11:58 PM, Adam Armstrong <adama(a)memetic.org> wrote: >> >>> SNMP agent configuration is dependent upon the device's os. >>> >>> We don't provide documentation for this, ask your vendor, or read the >>> documentation for net-snmp if you're using Linux. >>> >>> Adam. >>> >>> >>> Ravindra Gupta <ravindragupta9(a)gmail.com> wrote: >>> >>> >>> Dear Adam, >>> >>> can you provide me configuration step or any website url in which totally >>> define i.e how to configured server as well as client to observium. >>> >>> >>> >>> On Tue, Feb 5, 2013 at 10:40 PM, Adam Armstrong <adama(a)memetic.org> >>> wrote: >>> >>>> >>>> If you follow the install guide properly, it will work. >>>> >>>> adam. >>>> >>>> On Tue, 5 Feb 2013 23:17:56 +0530, Ravindra Gupta >>>> <ravindragupta9(a)gmail.com> wrote: >>>> > Dear Team, >>>> > >>>> > I have installed observium opensource using svn trunk in Linux system, >>>> when >>>> > we have called webpage on url the page display totally blank. >>>> > >>>> > Can you provide me installation document for server side as well as >>>> client >>>> > side. >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> >>> >>> >>> >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> >> >> >> -- >> >> >> Thanks & Regards, >> Ravindra Gupta >> Linux Server Admin >> 91-9773596807 >> Skype ID:- ravindragupta9 >> > > >-- > > >Thanks & Regards, >Ravindra Gupta >Linux Server Admin >91-9773596807 >Skype ID:- ravindragupta9 >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Configuration Step Required
by Adam Armstrong 05 Feb '13

05 Feb '13

SNMP agent configuration is dependent upon the device's os. We don't provide documentation for this, ask your vendor, or read the documentation for net-snmp if you're using Linux. Adam. Ravindra Gupta <ravindragupta9(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

Force10 CPU Usage
by Alex Vitola 05 Feb '13

05 Feb '13

High cpu usage (caused by snmp process) in a F10 S4810 is impacting on network performance. Anyone had any similar problem?

2 1

Issues monitoring an SRX cluster
by Jacob Gardiner 01 Feb '13

01 Feb '13

Hi all, Firstly - Cheers Adam et all for the development. I'm looking to see if anybody has had any luck properly monitoring a Juniper SRX cluster. We've got a couple up and running at the moment, in addition to some J-series units that we'll probably replace with another pair of SRXs in the future but we've been running into some issues. Basically when adding the host to observium, everything works a treat as usual. Devices get detected properly, node0 & node1's routing engines get detected properly and we can see two different graphs for each in relation to processor, memory, temperature etc. However when polling the interfaces, we get a zero response for bps. This behavior happens on all interfaces except the lo0.X interfaces and fxpX interfaces. (They show graphs and results). I've run a poll via cmdline with the -d flag and can see that the poller is definitely seeing a 0 response from all of the other interfaces, output looks something like: <paste> SQL[INSERT INTO `ports-state` (`port_id`) VALUES ('2151')] state inserted SQL[UPDATE `ports-state` set `poll_time` ='1359075465',`poll_period` ='153',`ifInOctets` ='',`ifInOctets_rate` ='0',`ifInOctets_delta` ='0',`ifOutOctets` ='',`ifOutOctets_rate` ='0',`ifOutOctets_delta` ='0',`ifInErrors` ='',`ifInErrors_rate` ='0',`ifInErrors_delta` ='0',`ifOutErrors` ='',`ifOutErrors_rate` ='0',`ifOutErrors_delta` ='0',`ifInUcastPkts` ='',`ifInUcastPkts_rate` ='0',`ifInUcastPkts_delta` ='0',`ifOutUcastPkts` ='',`ifOutUcastPkts_rate` ='0',`ifOutUcastPkts_delta` ='0',`ifInOctets_perc` ='0',`ifOutOctets_perc` ='0',`ifOctets_rate` ='0',`ifUcastPkts_rate` ='0',`ifErrors_rate` ='0' WHERE `port_id` = '2151'] 1 updated Port reth0(568) VLAN == ifInOctets (0 B) 0 Bps 153 secs ifOutOctets (0 B) 0 Bps 153 secs ifInErrors (0 B) 0 Bps 153 secs ifOutErrors (0 B) 0 Bps 153 secs ifInUcastPkts (0 B) 0 Bps 153 secs ifOutUcastPkts (0 B) 0 Bps 153 secs bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps)OK u:0.00 s:0.03 r:50.09 </paste> My first impression is that it's the MIB incorrectly polling the device, Can anybody confirm? Cheers, JG

2 4

health graphs missing
by Norman Daniel 31 Jan '13

31 Jan '13

Hi good day, I was wondering why the health graphs are missing for some devices? Regards, cid:5A2BFBA1-C1AC-4588-9E43-ADB44DDC1905 Mr. Norman U. Daniel IT Helpdesk CFJA CALL CENTRE CORPORATION Unit 258, Wellington Building, Plaza Lorenzo Ruiz, Binondo, Metro Manila, 1006 Philippines Phone: +63 2 242 0520 / +61 2 8355 3931 Fax: +63 2 857 2227 / +61 2 8569 0930 Mobile: +63 926 7455617 Email: <mailto:norman.daniel@cfjacallcentre.com> norman.daniel(a)cfjacallcentre.com Skype: cfjacc.ops.norman.daniel Web: <http://www.cfjacallcentre.com/> http://www.cfjacallcentre.com

2 1

[patch] detect more MRV details
by Rob J. Epping 31 Jan '13

31 Jan '13

Hi, I have updated support of MRV devices to include polling support for hardware, serial and version. I also added temperature sensor detection to discovery. Patch is at <http://puther.home.xs4all.nl/observium-mrvld-update.diff> Can this be added? THNX -- GRTNX, RobJE

2 1

Choose Frontpage
by Tobias Brunner 31 Jan '13

31 Jan '13

Hi, in html/pages/front/ I can see many different front pages. How can I choose which one I'd like to see? How is the URL composed? Cheers, Tobias -- Nine Internet Solutions AG, Albisriederstr. 243a, CH-8047 Zuerich Support +41 44 637 40 40 | Tel +41 44 637 40 00 | Direct +41 44 637 40 13 Skype nine.ch_support

6 8

Re: [Observium] /ports internal error
by Adam Armstrong 31 Jan '13

31 Jan '13

Increase the memory limit for php. Tobias Brunner <tobias.brunner(a)nine.ch> wrote: >Hi, > >The page "Ports" (/ports/) just gives me an 500 internal server error. >Is there anything I can you to debug this? > >Cheers, >Tobias > >-- >Nine Internet Solutions AG, Albisriederstr. 243a, CH-8047 Zuerich >Support +41 44 637 40 40 | Tel +41 44 637 40 00 | Direct +41 44 637 40 >13 >Skype nine.ch_support >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] Choose Frontpage
by Adam Armstrong 31 Jan '13

31 Jan '13

Its set by a configuration entry. Its documented on the wiki. Tobias Brunner <tobias.brunner(a)nine.ch> wrote: >Hi, > >in html/pages/front/ I can see many different front pages. How can I >choose which one I'd like to see? How is the URL composed? > >Cheers, >Tobias > >-- >Nine Internet Solutions AG, Albisriederstr. 243a, CH-8047 Zuerich >Support +41 44 637 40 40 | Tel +41 44 637 40 00 | Direct +41 44 637 40 >13 >Skype nine.ch_support >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Globe Frontpage
by Adam Armstrong 31 Jan '13

31 Jan '13

Not at the moment. Up could try using locations that are accurate, so that Google can correctly place them. Michael Cushard <mcc(a)axway.com> wrote: >Hi, > >On the globe.php front page, how are the sites placed on the map? I ask because some of the locations I have are not in the correct corresponding place on the map. Can I set a custom set of coordinates for a location to force it into the correct place on the map? > >Regards, > >Michael > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

/ports internal error
by Tobias Brunner 30 Jan '13

30 Jan '13

Hi, The page "Ports" (/ports/) just gives me an 500 internal server error. Is there anything I can you to debug this? Cheers, Tobias -- Nine Internet Solutions AG, Albisriederstr. 243a, CH-8047 Zuerich Support +41 44 637 40 40 | Tel +41 44 637 40 00 | Direct +41 44 637 40 13 Skype nine.ch_support

1 0

[patch] bugfix in mgeups frequency, voltage and current sensor detection.
by Rob J. Epping 30 Jan '13

30 Jan '13

Hi, On <http://puther.home.xs4all.nl/observium-mgeups-sensors-bugfix.diff> you will find a patch that will detect all frequency, voltage and current sensors on devices with more than 1 phase. Can this be patched? THNX -- GRTNX, RobJE

2 1

apache application error after upgrade
by ColoCenter bv 29 Jan '13

29 Jan '13

After some efforts I got the apache application plugin for observium working for a certain server. I was at first stuck with a missing module of PERL(LWP::Simple) It was working fine till today when i upgraded apache from 2.2.19 to 2.2.23. Not a very big upgrade, but now the apache script of observium is not working anymore. If I execute it manually it produces the following error: [root@server01 agent-local]# perl apache Data fetch failure. Any suggestions what might be causing this or where to look for an answer or more detailed error message and how to solve it? Many thanks, -- Alexander Lantink ColoCenter bv http://www.colocenter.nl info(a)colocenter.nl

2 2

Re: [Observium] Location Bar
by Adam Armstrong 29 Jan '13

29 Jan '13

Don't worry, something better is coming! observium(a)velder.li wrote: >Hi there > >Please bring back the old LocationBar. The new one is not very clear. > >Thx > >Regards, >Patrick > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Location Bar
by observium＠velder.li 29 Jan '13

29 Jan '13

Hi there Please bring back the old LocationBar. The new one is not very clear. Thx Regards, Patrick

1 0

Disable Sensor Alerts
by Adam Summerfield 29 Jan '13

29 Jan '13

We are getting a lot of false alerts from our Arista switches in regards to environmental sensors. I have tried enabling ignore under device settings, however after clicking save the option does not remain selected. I tried to disable alerts adding the following to the config.php but this did not work. $config['alerts']['sensor_classes']['current'] = false; $config['alerts']['sensor_classes']['voltage'] = false; $config['alerts']['sensor_classes']['fanspeed'] = false; $config['alerts']['sensor_classes']['temperature'] = false; Would appreciate any assistance. Regards, Adam

2 1

Re: [Observium] virtualized pfsense cpu monitoring
by Adam Armstrong 26 Jan '13

26 Jan '13

Because that is what bsnmpd reports :-) Stefan Milo <stefan(a)zendata.dk> wrote: >hi > >when i monitor vmware pfsense firewall, cpu usage on cpu0 is about 1% to 4%, and cpu1 cpu2 and cpu3 reports 0% usage. > >any idea why? > >br > >stefan milo >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

virtualized pfsense cpu monitoring
by Stefan Milo 25 Jan '13

25 Jan '13

hi when i monitor vmware pfsense firewall, cpu usage on cpu0 is about 1% to 4%, and cpu1 cpu2 and cpu3 reports 0% usage. any idea why? br stefan milo

1 0

router error
by Norman Daniel 25 Jan '13

25 Jan '13

Still experiencing this, and also experienced lost of connection on internet... 2013-01-25 03:02:08 System Device status changed to Up 2013-01-25 02:27:16 System Device status changed to Down 2013-01-25 01:02:54 System Sensor Warn Low Limit Updated: temperature cisco 1 chassis () 2013-01-25 01:02:54 System Sensor Warn High Limit Updated: temperature cisco 1 chassis () 2013-01-24 19:05:34 System Sensor Added: temperature cisco 1 chassis 2013-01-24 19:05:01 System Memory pool added: type cemp index 1.2 descr 2811 chassis - I/O 2013-01-24 19:05:00 System Memory pool added: type cemp index 1.1 descr 2811 chassis - Processor 2013-01-24 19:04:58 System Memory pool added: type cmp index 2 descr I/O 2013-01-24 19:04:58 System Memory pool added: type cmp index 1 descr Processor 2013-01-24 19:04:49 System Processor added: type cpm index 1 descr Processor 1 Regards, cid:5A2BFBA1-C1AC-4588-9E43-ADB44DDC1905 Mr. Norman U. Daniel IT Helpdesk CFJA CALL CENTRE CORPORATION Unit 258, Wellington Building, Plaza Lorenzo Ruiz, Binondo, Metro Manila, 1006 Philippines Phone: +63 2 242 0520 / +61 2 8355 3931 Fax: +63 2 857 2227 / +61 2 8569 0930 Mobile: +63 926 7455617 Email: <mailto:norman.daniel@cfjacallcentre.com> norman.daniel(a)cfjacallcentre.com Skype: cfjacc.ops.norman.daniel Web: <http://www.cfjacallcentre.com/> http://www.cfjacallcentre.com

2 1

Re: [Observium] [!! SPAM] Re: cisco router problem
by Norman Daniel 25 Jan '13

25 Jan '13

Thanks adam. Still experiencing this, and also experienced lost of connection on internet... 2013-01-25 03:02:08 System Device status changed to Up 2013-01-25 02:27:16 System Device status changed to Down 2013-01-25 01:02:54 System Sensor Warn Low Limit Updated: temperature cisco 1 chassis () 2013-01-25 01:02:54 System Sensor Warn High Limit Updated: temperature cisco 1 chassis () 2013-01-24 19:05:34 System Sensor Added: temperature cisco 1 chassis 2013-01-24 19:05:01 System Memory pool added: type cemp index 1.2 descr 2811 chassis - I/O 2013-01-24 19:05:00 System Memory pool added: type cemp index 1.1 descr 2811 chassis - Processor 2013-01-24 19:04:58 System Memory pool added: type cmp index 2 descr I/O 2013-01-24 19:04:58 System Memory pool added: type cmp index 1 descr Processor 2013-01-24 19:04:49 System Processor added: type cpm index 1 descr Processor 1 Regards, Mr. Norman U. Daniel IT Helpdesk CFJA CALL CENTRE CORPORATION Unit 258, Wellington Building, Plaza Lorenzo Ruiz, Binondo, Metro Manila, 1006 Philippines Phone: +63 2 242 0520 / +61 2 8355 3931 Fax: +63 2 857 2227 / +61 2 8569 0930 Mobile: +63 926 7455617 Email: norman.daniel(a)cfjacallcentre.com Skype: cfjacc.ops.norman.daniel Web: http://www.cfjacallcentre.com -----Original Message----- From: observium-bounces(a)observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Friday, January 25, 2013 9:14 AM To: Observium Network Observation System Subject: [!! SPAM] Re: [Observium] cisco router problem It seems that you have unstable connectivity between your Observium server and this Cisco device. adam. On Fri, 25 Jan 2013 09:52:49 +0800, "Norman Daniel" <norman.daniel(a)cfjacallcentre.com> wrote: > I received this error log from observium. > > > 2013-01-24 14:12:12 > > System > > Device status changed to Up > > > 2013-01-24 13:03:41 > > System > > Sensor Deleted: temperature cisco 1 chassis > > > 2013-01-24 13:01:31 > > System > > Processor removed: type cpm index 1 descr Processor 1 > > > 2013-01-24 12:47:26 > > System > > Device status changed to Down > > > > > > > > > > Regards, > > > > cid:5A2BFBA1-C1AC-4588-9E43-ADB44DDC1905 > > Mr. Norman U. Daniel > > IT Helpdesk > CFJA CALL CENTRE CORPORATION > > Unit 258, Wellington Building, > Plaza Lorenzo Ruiz, > > Binondo, Metro Manila, 1006 > > Philippines > > Phone: +63 2 242 0520 / +61 2 8355 3931 > > Fax: +63 2 857 2227 / +61 2 8569 0930 > > Mobile: +63 926 7455617 > > Email: <mailto:norman.daniel@cfjacallcentre.com> > norman.daniel(a)cfjacallcentre.com > > Skype: cfjacc.ops.norman.daniel > > Web: <http://www.cfjacallcentre.com/> http://www.cfjacallcentre.com _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

cisco router problem
by Norman Daniel 25 Jan '13

25 Jan '13

I received this error log from observium. 2013-01-24 14:12:12 System Device status changed to Up 2013-01-24 13:03:41 System Sensor Deleted: temperature cisco 1 chassis 2013-01-24 13:01:31 System Processor removed: type cpm index 1 descr Processor 1 2013-01-24 12:47:26 System Device status changed to Down Regards, cid:5A2BFBA1-C1AC-4588-9E43-ADB44DDC1905 Mr. Norman U. Daniel IT Helpdesk CFJA CALL CENTRE CORPORATION Unit 258, Wellington Building, Plaza Lorenzo Ruiz, Binondo, Metro Manila, 1006 Philippines Phone: +63 2 242 0520 / +61 2 8355 3931 Fax: +63 2 857 2227 / +61 2 8569 0930 Mobile: +63 926 7455617 Email: <mailto:norman.daniel@cfjacallcentre.com> norman.daniel(a)cfjacallcentre.com Skype: cfjacc.ops.norman.daniel Web: <http://www.cfjacallcentre.com/> http://www.cfjacallcentre.com

2 1

Re: [Observium] Poller performance
by Adam Armstrong 24 Jan '13

24 Jan '13

Observium scales primarily on the number of interfaces you have, as they account for the majority of I/o. 128 switches would be a large install, 128 servers would not. You should try running 2 or 3 pollers if your server's disk is not too heavily loaded. If you are only using one poller then your disk is waiting for SNMP was dating time. Memcached was replaced with mysql memory tables, which you are already using :-) Rrdcached seems to make little difference to me. I have my installs running in a ramdisk, as that removes the i/o bottleneck entirely. Adam. Tobias Brunner <tobias.brunner(a)nine.ch> wrote: >Hi, > >I have some performance troubles with the poller, it takes a bit more than 5 >minutes to finish. There are 128 devices to poll... > >Looking at the "Performance tuning" wiki page and the mailing list, I >implemented the following tweaks: >* Using poller-wrapper from Job Snijders ("Multiple poller instances" was >really bad, polling took about 10 minutes) >* Activated RRDcached > >Putting the RRDs on a Ramdisk is not a solution for me (too less memory). Does >memcache work with the current SVN build? >What other options for performance tuning do I have? One idea was to have >"worker" server which only poll a subset of devices and report the values back >to the master. Is something like that possible? >Which resources need the most I/O? RRD or MySQL? Are there many inserts and >updates to the Database? > >Thanks for all suggestions... > >Cheers, >Tobias > >-- >Nine Internet Solutions AG, Albisriederstr. 243a, CH-8047 Zuerich >Support +41 44 637 40 40 | Tel +41 44 637 40 00 | Direct +41 44 637 40 13 >Skype nine.ch_support >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Poller performance
by Tobias Brunner 24 Jan '13

24 Jan '13

Hi, I have some performance troubles with the poller, it takes a bit more than 5 minutes to finish. There are 128 devices to poll... Looking at the "Performance tuning" wiki page and the mailing list, I implemented the following tweaks: * Using poller-wrapper from Job Snijders ("Multiple poller instances" was really bad, polling took about 10 minutes) * Activated RRDcached Putting the RRDs on a Ramdisk is not a solution for me (too less memory). Does memcache work with the current SVN build? What other options for performance tuning do I have? One idea was to have "worker" server which only poll a subset of devices and report the values back to the master. Is something like that possible? Which resources need the most I/O? RRD or MySQL? Are there many inserts and updates to the Database? Thanks for all suggestions... Cheers, Tobias -- Nine Internet Solutions AG, Albisriederstr. 243a, CH-8047 Zuerich Support +41 44 637 40 40 | Tel +41 44 637 40 00 | Direct +41 44 637 40 13 Skype nine.ch_support

2 1

netsted location menu
by Michael Cushard 22 Jan '13

22 Jan '13

Hi, The nested location menu in build 3528 should help a little with organization. What would the syntax be for the custom location field of an object in order to create a top level location and several sub-level locations underneath it? For instance, something like EU -> FR -> Paris? Regards, Michael

4 5

sysLocation instead of sysContact on Alerts page
by Alex Pressé 21 Jan '13

21 Jan '13

Just a minor thing; on the edit alerts page ( http://observiumserver.mydomain.lan/device/device=1/tab=edit/section=alerts/ ) It says "Override sysLocation" where it should say "Override sysContact". -- Alex Presse "How much net work could a network work if a network could net work?"

1 0

Re: [Observium] netsted location menu
by Adam Armstrong 20 Jan '13

20 Jan '13

If you write them like an address, seperated by commas, you should be fine with the next version of the menu. Adam. Michael Cushard <mcc(a)axway.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Graph timezone
by Adam Armstrong 19 Jan '13

19 Jan '13

Shut your whore mouth! Tom Laermans <tom.laermans(a)powersource.cx> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Graph timezone
by Adam Armstrong 19 Jan '13

19 Jan '13

Nope, AFAIK there is no way to do this... Calugaru Adrian <calugaru_adrian(a)yahoo.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] Graph timezone
by Tom Laermans 19 Jan '13

19 Jan '13

Of course if you had asked "would it be possible".. right, adam? Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Adam Armstrong" <adama(a)memetic.org> To: "Calugaru Adrian" <calugaru_adrian(a)yahoo.com>, "Observation System" <observium(a)observium.org> Subject: [Observium] Graph timezone Date: Fri, Jan 18, 2013 19:34 Nope :-) Calugaru Adrian <calugaru_adrian(a)yahoo.com> wrote: Hi guys, Is it possible to set different timezones per device and have rrdtool generate graphs using that timezone? Thanks, Adrian

3 2

Bind9
by Ciro Iriarte 18 Jan '13

18 Jan '13

Hi!, is there anyone collecting bind9 stats with Observium? Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

1 1

Re: [Observium] Graph timezone
by Adam Armstrong 18 Jan '13

18 Jan '13

Nope :-) Calugaru Adrian <calugaru_adrian(a)yahoo.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Graph timezone
by Calugaru Adrian 18 Jan '13

18 Jan '13

Hi guys, Is it possible to set different timezones per device and have rrdtool generate graphs using that timezone? Thanks, Adrian

1 0

Re: [Observium] Overview
by Adam Armstrong 18 Jan '13

18 Jan '13

Not applicable to us, we pfsense is one device, we are many. We have per-device access already :-) "Rob J. Epping" <rob.epping(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Overview
by Adam Armstrong 18 Jan '13

18 Jan '13

The front page? It is designed to be customised. We almost totally ignore it in reality, as no one uses it. Which front page are you using? The default one? Adam Summerfield <asummerfield(a)harbourmsp.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 7

Possibility too set Graph Vertical Max too Line-speed
by Mattias Gyllenvarg 16 Jan '13

16 Jan '13

Hi I would like too be able too set the Linespeed as the Max vertical value. Especially as an option under "All ports" This would be handy when reviewing needed upgrades among other things. -- *Med Vänliga Hälsningar - Best Regards* *Mattias Gyllenvarg* *Nätutveckling* Bredband2 Tel: +46 406219712

1 0

Overview
by Adam Summerfield 15 Jan '13

15 Jan '13

Attempting to put this into production with our NOC. When they logon with the user class of "Global Read" they can see the devices but nothing appears on the overview page. If I create the user with class of "Normal" they cannot see anything. Admin class of course works as expected. Regards, Adam

1 0

Postgres monitor script
by Lance Raymond 15 Jan '13

15 Jan '13

Afternoon all, have my apache working nicely, mysql and moving through the list of to-do's. Next is our primary DB which is running postgres. I have that server added, SNMP working, the agent is loaded and I can telnet from the observium server on 6556 port with no issues. Looking at the install http://www.observium.org/wiki/Application/Postgresqlthe only thing left from that section and my notes from mysql is to copy the script from the local observium server (under /opt/observium/scripts/agent-local) to the postgres server and update the config with the user/pass but those files are not there. I also don't see postgres listed in the applications list for the device. Is postgres not supported anymore? -- *e*. lraymond(a)weatherflow.com *c.* 386.561.1509 *f.* 386.409.5178

1 0

Function scope issues?
by Paul Gear 11 Jan '13

11 Jan '13

Hi all, I'm just looking into a couple of nagging problems on my Observium install and i found this: 1. includes/discovery/discovery-protocols.inc.php uses ifNameDescr(), which is defined in includes/rewrites.php (called from includes/functions.php). 2. ifNameDescr() is a wrapper around ifLabel(), which itself is a wrapper around humanize_port() 3. humanize_port() calls humanspeed(), which is defined in html/includes/functions.inc.php This seems to indicate that ifNameDescr/ifLabel/humanize port, when called from discovery functions, will never work. Is this intentional? Or should humanspeed() (and possibly others of its peers within html/includes/functions.inc.php) be moved to includes/rewrites.php? Regards, Paul

3 3

Disable Monitoring of Linux Interfaces
by admin 11 Jan '13

11 Jan '13

Good Evening, I was able to get Observium up and running with no issues, but I do have a bit of an odd situation. I happen to have a server that I wish to monitor that has over 300 PPP interfaces. Observium is attempting to poll them, and its hammering the server hard, and Observium. Is there a way to remove polling of interfaces (or maybe just ppp interfaces) on that server? Thanks!

2 6

Drilling down to specific times in graphs
by Jason Lixfeld 11 Jan '13

11 Jan '13

I'm having a little trouble understanding how the graph drill downs are supposed to work. I select a 6 hour graph of something, From: says 17:44 To: says 23:44. Case 1: I change 17:44 to 16:44 and click Submit, From: says 11:44 To: says 18:44. Case 2: I leave From: at 17:44 but change To: to 18:44 and click Submit, From: says 12:44 To: says 13:44. Am I missing something on how these timeframes are supposed to work?

3 2

Re: [Observium] Apache application monitor problem
by Adam Armstrong 09 Jan '13

09 Jan '13

Observium doesn't hit apache directly. That is done via the agent script. Is it working? Lance Raymond <lraymond(a)weatherflow.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 6

Re: [Observium] Function scope issues?
by Adam Armstrong 09 Jan '13

09 Jan '13

yes :-) Though really the processing should be done at polling time. Its all a mess caused by gradual evolution! Paul Gear <observium(a)gear.dyndns.org> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Apache application monitor problem
by Lance Raymond 09 Jan '13

09 Jan '13

After a successful implement of the mysql module, I now am looking to monitor apache. I will try to give as much on the 1st post as I do now understand how the agents work a bit more (Thanks Adam) so the info and questions are; Unix-agent is installed, enabled, port is open, and I can hit the server-status from the observium server via curl; curl stats.domain.com/server-status <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> <html><head> <title>Apache Status</title> </head><body> <h1>Apache Server Status for stats.domain.com</h1> <dl><dt>Server Version: Apache/2.2.22 (Ubuntu) PHP/5.3.10-1ubuntu3.4 with Suhosin-Patch</dt> <dt>Server Built: Nov 8 2012 21:37:30 </dt></dl><hr /><dl> <dt>Current Time: Wednesday, 09-Jan-2013 04:00:49 UTC</dt> <dt>Restart Time: Tuesday, 08-Jan-2013 20:58:01 UTC</dt> <dt>Parent Server Generation: 3</dt> <dt>Server uptime: 7 hours 2 minutes 47 seconds</dt> <dt>Total accesses: 651 - Total Traffic: 1.7 MB</dt> <dt>CPU Usage: u9.48 s1.89 cu0 cs0 - .0448% CPU load</dt> <dt>.0257 requests/sec - 71 B/second - 2773 B/request</dt> <dt>1 requests currently being processed, 9 idle workers</dt> Using the poller command to test server; ubuntu@websvr1:/opt/observium$ ./poller.php -v -h stats.domain.com Observium Poller v0.12.11.3407 Starting polling run: stats.domain.com 5 linux (unix) Observium UNIX Agent: execution time: 328ms Processes: Sensors: Using UNIX Agent Uptime (2877622) Uptime: 33 days, 7h 20m 22s Hardware: Generic x86 64-bit Version: 3.2.0-31-virtual Features: /usr/bin/distro: No such file or directory Serial: IPMI: Processor Intel Xeon E5507 @ 2.27GHz 1% Mempool Physical memory: 79.6% Mempool Virtual memory: 51.63% Mempool Swap space: 0.01% Storage /: 17% Storage /mnt: 0% Polling Netstats: IP TCP UDP ICMP SNMP HR Stats: Processes Users Polling IP-MIB ipSystemStats ipv4 ipv6 Caching Oids: ifEntry ifXEntry dot3StatsDuplexStatusvalidvalid Port lo(1) HC HC VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Port eth0(2) HC HC VLAN == bps(1.32kbps/4kbps)bytes(4.83kB/14.6kB)pkts(2.2pps/2.2pps) Checking UCD DiskIO MIB: xvda1 xvdb xvda3 OSPF: Processes: Areas: Ports: Neighbours: Entity Physical: Applications: agent uptime netstat_ip netstat_ip_frag netstat_tcp netstat_udp netstat_icmp netstat_icmp_info netstat_snmp netstat_snmp_pkt hr_processes hr_users ucd_cpu ucd_swap_io ucd_io ucd_contexts ucd_interrupts ucd_memory ucd_load ipsystemstats_ipv4 ipsystemstats_ipv4_frag ipsystemstats_ipv6 ipsystemstats_ipv6_frag Polled in 4.680 seconds UPDATED! MySQL: Cell[0/0s] Row[3/0s] Rows[25/0.01s] Column[0/0s] Update[9/0.01s] Insert[5/0.01s] Delete[0/0s] So, it seems the agent is running, apache is reachable by the server with the server-status, just not sure why the graph page is broken. The main graph's all say Error Drawing Graph, and the scoreboard at the bottom just has a few broken image links. -- *e*. lraymond(a)weatherflow.com *c.* 386.561.1509 *f.* 386.409.5178

1 0

Re: [Observium] Adding mysql monitoring
by Adam Armstrong 09 Jan '13

09 Jan '13

The agent is not enabled for that host :-) Lance Raymond <lraymond(a)weatherflow.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 3

Re: [Observium] Adding mysql monitoring
by Adam Armstrong 08 Jan '13

08 Jan '13

I just added apache/mysql agents to a clean install and it worked OK. Run the poller with -d Adam. Lance Raymond <lraymond(a)weatherflow.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Adding mysql monitoring
by Lance Raymond 08 Jan '13

08 Jan '13

Checking out http://www.observium.org/wiki/Application/MySQL#Requirementsand seems pretty straight forward. I have my server running, added that box and see it collecting data now. php5-cli and php-mysql are installed on both the server and mysql server I wish to monitor, but nothing has been added and not sure how to force check, add, etc. Docs are simple enough; I created the user with access on the remote server. Then the steps are simply; *Copy* the mysql script *from scripts/agent-local/* in your observium install to */usr/local/check_mk_agent/local/* (/usr/lib/check_mk_agent/local/ on Debian systems) the *server* you wish to monitor. The remote server is running ubuntu, so I create a folder; /usr/lib/check_mk_agent/local with 2 files; mysql (script) mysql.cnf I can run the script locally and get a lot of data (here is a sample); root@mysql101:/usr/lib/check_mk_agent/local# ./mysql <<<mysql>>> a0:13362926 a1:50929 a2:4796992 a3:287789 So is it something on the server end I need to add/edit? Tnx -- *e*. lraymond(a)weatherflow.com *c.* 386.561.1509 *f.* 386.409.5178

3 5

netdot VM root password
by Ramzi Abdallah 07 Jan '13

07 Jan '13

Hi, What is the default root password for the netdot VM appliance. I need it to setup a static IP to the installation Regards, Ramzi

2 1

all hosts down moved observium to a new server
by Bao Nguyen 04 Jan '13

04 Jan '13

All, I'm kind of hitting a wall here. I moved Observium to a new server today and somehow Observium is unable to "ping" any hosts. sour% ./poller.php -h lab-lightning.sdsc.edu -d Observium Poller v0.13.1.3507 DEBUG! Starting polling run: SQL[SELECT `device_id` FROM `devices` WHERE `disabled` = 0 AND `hostname` LIKE 'lab-lightning.sdsc.edu' ORDER BY `device_id` ASC] ./poller.php lab-lightning.sdsc.edu January 3, 2013, 17:17 - 0 devices polled in 0.001 secs MySQL: Cell[0/0s] Row[0/0s] Rows[1/0s] Column[0/0s] Update[0/0s] Insert[0/0s] Delete[0/0s] However, on the host it self, I can ping or snmpget any devices using the same FQDN name. sour% ping lab-lightning.sdsc.edu PING lab-lightning.sdsc.edu (198.202.79.48) 56(84) bytes of data. 64 bytes from lab-lightning.sdsc.edu (198.202.79.48): icmp_req=1 ttl=253 time=0.728 ms ^C --- lab-lightning.sdsc.edu ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.728/0.728/0.728/0.000 ms sour% snmpwalk -v 2c -c test lab-lightning.sdsc.edu sysName.0 SNMPv2-MIB::sysName.0 = STRING: "lab-lightning.sdsc.edu" thanks, -bn 0216331C

4 3

Re: [Observium] all hosts down moved observium to a new server
by Adam Armstrong 04 Jan '13

04 Jan '13

That hostname doesnt match the database, or that host is disabled. Adam. Bao Nguyen <ngqbao(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Aggrgation, Nagios Check, Graph Caching
by Tobias Brunner 01 Jan '13

01 Jan '13

Hi, After using Observium for some time I have some ideas and questions: * Is it possible to create aggregated graphs? F.e. I'd like to aggregate all uplinks (which are on different routers) into one big graph (all uplinks as a single line, in one graph (overlay). And the traffic aggregated). * This could maybe end up in a Dashboard, which shows me an overview of what's going on in the network. (Aggregated Graphs, Top Ports, Recent Syslog, High Values, ...) * I'd like to check some values collected by Observium with Nagios to generate an Alert (F.e. the temperatures, dBm, ...). This could be a plugin like "check_observium <device> <type> <thresholds>". How can I access the raw data in Observium from outside? Is there something like this available, or does it need to be written? My main concern is to have just one tool which Polls the devices and get the collected data out of it. I don't want to have many tools which are all doing SNMP. One single tool should be enough. * How can I get the graphs out of Observium to display in another tool? * Are there any caching mechanisms for the Graphs? Everytime I hover over a link which creates a Pop-Up the graphs are being generated. What about caching the generated graphs for f.e. 5 minutes? Cheers and thanks a lot for this great tool! Tobias -- Nine Internet Solutions AG, Albisriederstr. 243a, CH-8047 Zuerich Support +41 44 637 40 40 | Tel +41 44 637 40 00 | Direct +41 44 637 40 13 Skype nine.ch_support

2 1

Logstash and Observium
by Tobias Brunner 31 Dec '12

31 Dec '12

Hi everyone, We are using Logstash to collect Syslog messages from our network gear. Here is a way to send the collected messages to Observium: * Define a IOS filter in Logstash filter { ### IOS Grok grok { type => "syslog" pattern => [ "<%{POSINT:syslog_pri}>%{SYSLOGTIMESTAMP:syslog_timestamp} %{SYSLOGHOST:syslog_hostname} %{DATA:cisco_dummyvalue}: %{DATA:cisco_timestamp}: \%%{DATA:cisco_eventcode}: %{GREEDYDATA:syslog_message}" ] add_field => [ "received_at", "%{@timestamp}" ] add_field => [ "received_from", "%{@source_host}" ] } } * Add the following output to logstash: output { pipe { command => "/usr/bin/php /opt/observium/syslog.php" message_format => "%{@source_host}||%{syslog_facility}||%{syslog_severity_code}||%{syslog_severity}||00||%{@timestamp}||%{cisco_dummyvalue}: &{cisco_timestamp}: %%{cisco_eventcode}: %{@message}||cisco" } } As I did not find a way to convert the @timestamp field of Logstash to the needed format, there is one additional line in syslog.php needed: --- syslog.php.orig 2012-12-21 11:28:41.741696532 +0100 +++ syslog.php 2012-12-29 11:58:59.790246786 +0100 @@ -28,6 +28,8 @@ { #logfile($line); list($entry['host'],$entry['facility'],$entry['priority'], $entry['level'], $entry['tag'], $entry['timestamp'], $entry['msg'], $entry['program']) = explode("||", trim($line)); + ## reformat timestamp + $entry['timestamp'] = date("Y-m-d H:i:s",strtotime($entry['timestamp'])); process_syslog($entry, 1); unset($entry); unset($line); $i++; And I was also not able to find a value for the fields "TAG" and "PROGRAM" for the message_format. So I hardcoded them as "OO" and "cisco". This works for me. Cheers, Tobias -- Nine Internet Solutions AG, Albisriederstr. 243a, CH-8047 Zuerich Support +41 44 637 40 40 | Tel +41 44 637 40 00 | Direct +41 44 637 40 13 Skype nine.ch_support

1 0

Re: [Observium] No Devices Shown in New Installation
by Adam Armstrong 29 Dec '12

29 Dec '12

lol :-) Mark Kamichoff <prox(a)prolixium.com> wrote: >On Mon, Dec 24, 2012 at 11:28:26PM -0600, Adam Armstrong wrote: >> It might be something that's changed recently, with adding sorting. >> >> Interesting that it claims you have zero devices/ports in the header too. > >I had a few minutes to look into this, today. After adding debugging >print statements to devices.inc.php and then looking to see why all >devices were failing devices_permitted, I discovered the problem: > >mysql> SELECT * FROM users; >+---------+----------+------------------------------------+----------+-------+-------+-------+-------------------+ >| user_id | username | password | realname | email | descr | level | can_modify_passwd | >+---------+----------+------------------------------------+----------+-------+-------+-------+-------------------+ >| 1 | prox | (removed) | | | | 0 | 1 | > >I thought this was interesting, so I went back to the original terminal >capture of my installation, and saw this: > >(atlantis:20:31)# /opt/observium/adduser.php prox (removed) prox(a)prolixium.com >User prox added successfully >(atlantis:20:32)# > >Whoops! It looks like I failed to specify a user level but continued to >add arguments afterwards. My e-mail address didn't appear in the MySQL >DB (see above) and my privilege level defaulted to 0. I haven't looked >through the adduser.php code, but I suspect that it tried to interpret >my e-mail address as an integer: > >(atlantis:11:12)# ./adduser.php >Add User Tool >Usage: ./adduser.php <username> <password> <level 1-10> [email] > >I'm finally up and running and can see some pretty graphs that have >accumulated over the last few days ;) > >- Mark > >> >> adam. >> >> On 24/12/2012 22:29, Mark Kamichoff wrote: >> >Hi Adam - >> > >> >On Mon, Dec 24, 2012 at 07:09:42PM -0600, Adam Armstrong wrote: >> >>Put /debug/ on the end of the URL. >> >Well, that certainly produced some extra information. I think it boils >> >down to something happening between the MySQL query and getting the >> >output to the web UI. Here's what /devices/debug gives me: >> > >> >o http://www.prolixium.com/share/observium-devices-debug.pdf >> >o http://www.prolixium.com/share/observium-devices-debug.html >> > >> >I can run some of those queries directly on the MySQL command line and >> >get results consistent with what should be displayed by the web UI: >> > >> >mysql> SELECT COUNT(port_id) FROM `ports` WHERE `ifOperStatus` = 'down' AND `ifAdminStatus` = 'up' AND `ignore` = '0'; >> >+----------------+ >> >| COUNT(port_id) | >> >+----------------+ >> >| 13 | >> >+----------------+ >> >1 row in set (0.00 sec) >> > >> >mysql> SELECT * FROM `devices` WHERE 1 ORDER BY hostname \G >> >*************************** 1. row *************************** >> > device_id: 3 >> > hostname: dax >> > sysName: dax.prolixium.com >> > community: <omitted> >> >[..output trimmed, but three devices are shown..] >> > >> >There are some errors that may be important, although PHP flags them as >> >warnings: >> > >> >Warning: sort() expects parameter 1 to be array, null given in /opt/observium/html/includes/functions.inc.php on line 738 >> > >> >Warning: Invalid argument supplied for foreach() in /opt/observium/html/pages/devices.inc.php on line 120 >> > >> >The queries directly above these PHP messages in the debug output result >> >in no rows returned: >> > >> >mysql> SELECT D.device_id,location FROM devices AS D, devices_perms AS P WHERE D.device_id = P.device_id AND P.user_id = '1' GROUP BY location ORDER BY location; >> >Empty set (0.00 sec) >> > >> >mysql> SELECT attrib_type,attrib_value,device_id FROM devices_attribs WHERE attrib_type LIKE 'override_sysLocation%' ORDER BY attrib_type; >> >Empty set (0.00 sec) >> > >> >In the meantime, I'm going to add a few more random devices and see if I >> >can get one to display correctly.. >> > >> >Thanks! >> > >> >- Mark >> > >> >>Mark Kamichoff <prox(a)prolixium.com> wrote: >> >> >> >>>Hi - >> >>> >> >>>Warning: Here's another one of the "I installed it but it doesn't work!" >> >>>e-mails. >> >>> >> >>>I recently setup Observium (SVN from Dec 23, 2012) on a Debian >> >>>testing/unstable x86_64-based host. I followed all of the instructions >> >>>with the exception of the installation of libvirt packages (I don't >> >>>appear to have a need for it) and although I appear to have successfully >> >>>added devices, none of them show up in the web UI. >> >>> >> >>>The three devices I've added are the following: >> >>> >> >>>o Juniper SRX100 >> >>>o FreeBSD x86_64 Host >> >>>o Linux x86_64 Host >> >>> >> >>>According to observium.log the cron jobs are running fine and the >> >>>devices are being polled: >> >>> >> >>>(atlantis:16:44)# tail -n 8 observium.log >> >>>/opt/observium/poller.php all December 24, 2012, 16:25 - 3 devices polled in 21.97 secs >> >>>/opt/observium/discovery.php new December 24, 2012, 16:30 - 0 devices discovered in 0.001 secs >> >>>/opt/observium/poller.php all December 24, 2012, 16:30 - 3 devices polled in 21.46 secs >> >>>/opt/observium/discovery.php new December 24, 2012, 16:35 - 0 devices discovered in 0.002 secs >> >>>/opt/observium/poller.php all December 24, 2012, 16:35 - 3 devices polled in 21.41 secs >> >>>/opt/observium/discovery.php new December 24, 2012, 16:40 - 0 devices discovered in 0.002 secs >> >>>/opt/observium/poller.php all December 24, 2012, 16:40 - 3 devices polled in 21.97 secs >> >>>/opt/observium/discovery.php new December 24, 2012, 16:45 - 0 devices discovered in 0.000 secs >> >>> >> >>>I'm not sure exactly what check-errors.php does (maybe it just checks >> >>>the RRDs), but it seems to indicate that there aren't any glaring >> >>>issues: >> >>> >> >>>(atlantis:16:45)# ./check-errors.php >> >>>Checked 80 interfaces >> >>>0 interfaces with errors over the past 5 minutes. >> >>> >> >>>I even looked in the MySQL DB and the `devices` table seems to be >> >>>populated correctly. >> >>> >> >>>The problem is that the web UI doesn't show any devices: >> >>> >> >>>http://www.prolixium.com/share/screens/observium-devices.png >> >>> >> >>>However, if I navigate to System -> About Observium, the statistics >> >>>table shows devices, interfaces, CPUs, etc.: >> >>> >> >>>http://www.prolixium.com/share/screens/observium-stats.png >> >>> >> >>>I've got to be missing something obvious. I thought the user I created >> >>>might not have sufficient privileges, but I created the user "prox" with >> >>>privilege level 10. >> >>> >> >>>The only thing that did not go 100% as expected was the DB schema load. >> >>>The instructions indicated that errors in the SQL revisions /up to/ 006 >> >>>will be expected, but I saw two errors past revision 006: >> >>> >> >>>(atlantis:18:06)# php includes/sql-schema/update.php >> >>>-- Updating database schema >> >>>000 -> 001 ... done. >> >>>001 -> 002 ... done. >> >>>002 -> 003 ... done. >> >>>003 -> 004 ... done. >> >>>004 -> 005 ... done. >> >>>005 -> 006 ... done. >> >>>006 -> 007 ... done (1 errors). >> >>>007 -> 008 ... done. >> >>>[..snip..] >> >>>031 -> 032 ... done. >> >>>032 -> 033 ... done (2 errors). >> >>>033 -> 034 ... done. >> >>>[..snip..] >> >>>039 -> 040 ... done. >> >>>-- Done >> >>> >> >>>I'm not sure if this is minor or something to be concerned about. Here >> >>>is some package information: >> >>> >> >>>mysql-server-5.5 5.5.24+dfsg-9 >> >>>libapache2-mod-php5 5.4.4-10 >> >>>apache2-mpm-prefork 2.2.22-12 >> >>> >> >>>There appear to be no PHP errors in the Apache error log I setup for the >> >>>Observium virtual host. >> >>> >> >>>Is there anything else I should check? >> >>> >> >>>Oh, I'm using Google Chrome 23.0.1271.101 on MacOS 10.8 (at the moment, >> >>>at least). >> >>> >> >>>Thanks! >> >>> >> >>>- Mark >> >>> >> >>>-- >> >>>Mark Kamichoff >> >>>prox(a)prolixium.com >> >>>http://www.prolixium.com/ >> >>> >> >>>_______________________________________________ >> >>>observium mailing list >> >>>observium(a)observium.org >> >>>http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >>_______________________________________________ >> >>observium mailing list >> >>observium(a)observium.org >> >>http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> > >> > >> >_______________________________________________ >> >observium mailing list >> >observium(a)observium.org >> >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > >-- >Mark Kamichoff >prox(a)prolixium.com >http://www.prolixium.com/ >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] No Devices Shown in New Installation
by Adam Armstrong 29 Dec '12

29 Dec '12

Put /debug/ on the end of the URL. Mark Kamichoff <prox(a)prolixium.com> wrote: >Hi - > >Warning: Here's another one of the "I installed it but it doesn't work!" >e-mails. > >I recently setup Observium (SVN from Dec 23, 2012) on a Debian >testing/unstable x86_64-based host. I followed all of the instructions >with the exception of the installation of libvirt packages (I don't >appear to have a need for it) and although I appear to have successfully >added devices, none of them show up in the web UI. > >The three devices I've added are the following: > >o Juniper SRX100 >o FreeBSD x86_64 Host >o Linux x86_64 Host > >According to observium.log the cron jobs are running fine and the >devices are being polled: > >(atlantis:16:44)# tail -n 8 observium.log >/opt/observium/poller.php all December 24, 2012, 16:25 - 3 devices polled in 21.97 secs >/opt/observium/discovery.php new December 24, 2012, 16:30 - 0 devices discovered in 0.001 secs >/opt/observium/poller.php all December 24, 2012, 16:30 - 3 devices polled in 21.46 secs >/opt/observium/discovery.php new December 24, 2012, 16:35 - 0 devices discovered in 0.002 secs >/opt/observium/poller.php all December 24, 2012, 16:35 - 3 devices polled in 21.41 secs >/opt/observium/discovery.php new December 24, 2012, 16:40 - 0 devices discovered in 0.002 secs >/opt/observium/poller.php all December 24, 2012, 16:40 - 3 devices polled in 21.97 secs >/opt/observium/discovery.php new December 24, 2012, 16:45 - 0 devices discovered in 0.000 secs > >I'm not sure exactly what check-errors.php does (maybe it just checks >the RRDs), but it seems to indicate that there aren't any glaring >issues: > >(atlantis:16:45)# ./check-errors.php >Checked 80 interfaces >0 interfaces with errors over the past 5 minutes. > >I even looked in the MySQL DB and the `devices` table seems to be >populated correctly. > >The problem is that the web UI doesn't show any devices: > >http://www.prolixium.com/share/screens/observium-devices.png > >However, if I navigate to System -> About Observium, the statistics >table shows devices, interfaces, CPUs, etc.: > >http://www.prolixium.com/share/screens/observium-stats.png > >I've got to be missing something obvious. I thought the user I created >might not have sufficient privileges, but I created the user "prox" with >privilege level 10. > >The only thing that did not go 100% as expected was the DB schema load. >The instructions indicated that errors in the SQL revisions /up to/ 006 >will be expected, but I saw two errors past revision 006: > >(atlantis:18:06)# php includes/sql-schema/update.php >-- Updating database schema >000 -> 001 ... done. >001 -> 002 ... done. >002 -> 003 ... done. >003 -> 004 ... done. >004 -> 005 ... done. >005 -> 006 ... done. >006 -> 007 ... done (1 errors). >007 -> 008 ... done. >[..snip..] >031 -> 032 ... done. >032 -> 033 ... done (2 errors). >033 -> 034 ... done. >[..snip..] >039 -> 040 ... done. >-- Done > >I'm not sure if this is minor or something to be concerned about. Here >is some package information: > >mysql-server-5.5 5.5.24+dfsg-9 >libapache2-mod-php5 5.4.4-10 >apache2-mpm-prefork 2.2.22-12 > >There appear to be no PHP errors in the Apache error log I setup for the >Observium virtual host. > >Is there anything else I should check? > >Oh, I'm using Google Chrome 23.0.1271.101 on MacOS 10.8 (at the moment, >at least). > >Thanks! > >- Mark > >-- >Mark Kamichoff >prox(a)prolixium.com >http://www.prolixium.com/ > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 3

Re: [Observium] APC UPS Current Sensor
by Michael F. Kisser 27 Dec '12

27 Dec '12

Tom, Thanks for the reply. I did get more into the UPS's and they all show "Load Power % of Watts" Only the RT shows Load Current and also all show runtime remaining. Thanks, Mike ---------------------------------------------------------------------- Message: 1 Date: Wed, 26 Dec 2012 19:08:29 +0000 From: "Michael F. Kisser" <mike.kisser(a)railstream.biz> To: "observium(a)observium.org" <observium(a)observium.org> Subject: [Observium] APC UPS Current Sensor Message-ID: <7863F40C09BE9941A578A8AC4AB48DE056EEA8BA(a)RSSERV02.railstream.local> Content-Type: text/plain; charset="us-ascii" Hello all, I have the fallowing UPS's With APC 9617 Management cards Smart-UPS 1000 600.3.D Does not report Current draw Smart-UPS RT 2000 XL 801.3.D Everything works SMART-UPS 2200 80.11.D Does not report Current draw Everything else is reporting just not the draw on the other UPS's I have updated to APC Management Module AOS v3.7.3 / App v3.7.2 Can I Upgrade the Firmware on the UPS its self? Still Only the 2000 XL reports Current If I could ask it would be nice to see the Runtime on the UPS. Any sugestions on how to fix the current for the 1000 & 2200 UPS's I know there older UPS's but they work very well and was looking at getting more 1000's down the road but if I have to go with a newer UPS to get this to work that's ok to. Thanks, Mike

1 0

APC UPS Current Sensor
by Michael F. Kisser 26 Dec '12

26 Dec '12

Hello all, I have the fallowing UPS's With APC 9617 Management cards Smart-UPS 1000 600.3.D Does not report Current draw Smart-UPS RT 2000 XL 801.3.D Everything works SMART-UPS 2200 80.11.D Does not report Current draw Everything else is reporting just not the draw on the other UPS's I have updated to APC Management Module AOS v3.7.3 / App v3.7.2 Can I Upgrade the Firmware on the UPS its self? Still Only the 2000 XL reports Current If I could ask it would be nice to see the Runtime on the UPS. Any sugestions on how to fix the current for the 1000 & 2200 UPS's I know there older UPS's but they work very well and was looking at getting more 1000's down the road but if I have to go with a newer UPS to get this to work that's ok to. Thanks, Mike

2 1

Re: [Observium] Graphics
by Tom Laermans 25 Dec '12

25 Dec '12

Be sure to check the faq page as well for common problems, and when that doesnt help, perhaps google for efficient ways of asking for help :/ Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Nikolay Shopik" <shopik(a)inblock.ru> To: "Observium Network Observation System" <observium(a)observium.org> Subject: [Observium] Graphics Date: Tue, Dec 25, 2012 12:27 Sure, there no need to google, everything is here http://observium.org/wiki/Installation just follow it and you'll be fine. On 25/12/12 15:07, ServisTURK - İlkay Karadam wrote: > Hi All, > > > > İ m newbie at observium. İ installed the observium and its working ok but > graphics doesn t work. İ earched the issue at the google but i didn t find > anything. Can anyone has check list or like that or how can i check what s > wrong my installation... thx. > > > > Saygılarımla > > > > İlkay Karadam > > ServisTURK Bilgi Teknolojileri San ve Tic Ltd Şti > > Ahmediye M. Halk C. Ekşi İş Merkezi No:35/4 > > Üsküdar/İstanbul > > Tel. 0216 530 36 84 Gsm. 0555 205 45 45 > > > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Graphics
by ServisTURK - İlkay Karadam 25 Dec '12

25 Dec '12

Hi All, İ m newbie at observium. İ installed the observium and its working ok but graphics doesn t work. İ earched the issue at the google but i didn t find anything. Can anyone has check list or like that or how can i check what s wrong my installation... thx. Saygılarımla İlkay Karadam ServisTURK Bilgi Teknolojileri San ve Tic Ltd Şti Ahmediye M. Halk C. Ekşi İş Merkezi No:35/4 Üsküdar/İstanbul Tel. 0216 530 36 84 Gsm. 0555 205 45 45

2 1

Re: [Observium] No Devices Shown in New Installation
by Adam Armstrong 25 Dec '12

25 Dec '12

Wtf oO Mark Kamichoff <prox(a)prolixium.com> wrote: >Hi - > >Warning: Here's another one of the "I installed it but it doesn't work!" >e-mails. > >I recently setup Observium (SVN from Dec 23, 2012) on a Debian >testing/unstable x86_64-based host. I followed all of the instructions >with the exception of the installation of libvirt packages (I don't >appear to have a need for it) and although I appear to have successfully >added devices, none of them show up in the web UI. > >The three devices I've added are the following: > >o Juniper SRX100 >o FreeBSD x86_64 Host >o Linux x86_64 Host > >According to observium.log the cron jobs are running fine and the >devices are being polled: > >(atlantis:16:44)# tail -n 8 observium.log >/opt/observium/poller.php all December 24, 2012, 16:25 - 3 devices polled in 21.97 secs >/opt/observium/discovery.php new December 24, 2012, 16:30 - 0 devices discovered in 0.001 secs >/opt/observium/poller.php all December 24, 2012, 16:30 - 3 devices polled in 21.46 secs >/opt/observium/discovery.php new December 24, 2012, 16:35 - 0 devices discovered in 0.002 secs >/opt/observium/poller.php all December 24, 2012, 16:35 - 3 devices polled in 21.41 secs >/opt/observium/discovery.php new December 24, 2012, 16:40 - 0 devices discovered in 0.002 secs >/opt/observium/poller.php all December 24, 2012, 16:40 - 3 devices polled in 21.97 secs >/opt/observium/discovery.php new December 24, 2012, 16:45 - 0 devices discovered in 0.000 secs > >I'm not sure exactly what check-errors.php does (maybe it just checks >the RRDs), but it seems to indicate that there aren't any glaring >issues: > >(atlantis:16:45)# ./check-errors.php >Checked 80 interfaces >0 interfaces with errors over the past 5 minutes. > >I even looked in the MySQL DB and the `devices` table seems to be >populated correctly. > >The problem is that the web UI doesn't show any devices: > >http://www.prolixium.com/share/screens/observium-devices.png > >However, if I navigate to System -> About Observium, the statistics >table shows devices, interfaces, CPUs, etc.: > >http://www.prolixium.com/share/screens/observium-stats.png > >I've got to be missing something obvious. I thought the user I created >might not have sufficient privileges, but I created the user "prox" with >privilege level 10. > >The only thing that did not go 100% as expected was the DB schema load. >The instructions indicated that errors in the SQL revisions /up to/ 006 >will be expected, but I saw two errors past revision 006: > >(atlantis:18:06)# php includes/sql-schema/update.php >-- Updating database schema >000 -> 001 ... done. >001 -> 002 ... done. >002 -> 003 ... done. >003 -> 004 ... done. >004 -> 005 ... done. >005 -> 006 ... done. >006 -> 007 ... done (1 errors). >007 -> 008 ... done. >[..snip..] >031 -> 032 ... done. >032 -> 033 ... done (2 errors). >033 -> 034 ... done. >[..snip..] >039 -> 040 ... done. >-- Done > >I'm not sure if this is minor or something to be concerned about. Here >is some package information: > >mysql-server-5.5 5.5.24+dfsg-9 >libapache2-mod-php5 5.4.4-10 >apache2-mpm-prefork 2.2.22-12 > >There appear to be no PHP errors in the Apache error log I setup for the >Observium virtual host. > >Is there anything else I should check? > >Oh, I'm using Google Chrome 23.0.1271.101 on MacOS 10.8 (at the moment, >at least). > >Thanks! > >- Mark > >-- >Mark Kamichoff >prox(a)prolixium.com >http://www.prolixium.com/ > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

No Devices Shown in New Installation
by Mark Kamichoff 24 Dec '12

24 Dec '12

Hi - Warning: Here's another one of the "I installed it but it doesn't work!" e-mails. I recently setup Observium (SVN from Dec 23, 2012) on a Debian testing/unstable x86_64-based host. I followed all of the instructions with the exception of the installation of libvirt packages (I don't appear to have a need for it) and although I appear to have successfully added devices, none of them show up in the web UI. The three devices I've added are the following: o Juniper SRX100 o FreeBSD x86_64 Host o Linux x86_64 Host According to observium.log the cron jobs are running fine and the devices are being polled: (atlantis:16:44)# tail -n 8 observium.log /opt/observium/poller.php all December 24, 2012, 16:25 - 3 devices polled in 21.97 secs /opt/observium/discovery.php new December 24, 2012, 16:30 - 0 devices discovered in 0.001 secs /opt/observium/poller.php all December 24, 2012, 16:30 - 3 devices polled in 21.46 secs /opt/observium/discovery.php new December 24, 2012, 16:35 - 0 devices discovered in 0.002 secs /opt/observium/poller.php all December 24, 2012, 16:35 - 3 devices polled in 21.41 secs /opt/observium/discovery.php new December 24, 2012, 16:40 - 0 devices discovered in 0.002 secs /opt/observium/poller.php all December 24, 2012, 16:40 - 3 devices polled in 21.97 secs /opt/observium/discovery.php new December 24, 2012, 16:45 - 0 devices discovered in 0.000 secs I'm not sure exactly what check-errors.php does (maybe it just checks the RRDs), but it seems to indicate that there aren't any glaring issues: (atlantis:16:45)# ./check-errors.php Checked 80 interfaces 0 interfaces with errors over the past 5 minutes. I even looked in the MySQL DB and the `devices` table seems to be populated correctly. The problem is that the web UI doesn't show any devices: http://www.prolixium.com/share/screens/observium-devices.png However, if I navigate to System -> About Observium, the statistics table shows devices, interfaces, CPUs, etc.: http://www.prolixium.com/share/screens/observium-stats.png I've got to be missing something obvious. I thought the user I created might not have sufficient privileges, but I created the user "prox" with privilege level 10. The only thing that did not go 100% as expected was the DB schema load. The instructions indicated that errors in the SQL revisions /up to/ 006 will be expected, but I saw two errors past revision 006: (atlantis:18:06)# php includes/sql-schema/update.php -- Updating database schema 000 -> 001 ... done. 001 -> 002 ... done. 002 -> 003 ... done. 003 -> 004 ... done. 004 -> 005 ... done. 005 -> 006 ... done. 006 -> 007 ... done (1 errors). 007 -> 008 ... done. [..snip..] 031 -> 032 ... done. 032 -> 033 ... done (2 errors). 033 -> 034 ... done. [..snip..] 039 -> 040 ... done. -- Done I'm not sure if this is minor or something to be concerned about. Here is some package information: mysql-server-5.5 5.5.24+dfsg-9 libapache2-mod-php5 5.4.4-10 apache2-mpm-prefork 2.2.22-12 There appear to be no PHP errors in the Apache error log I setup for the Observium virtual host. Is there anything else I should check? Oh, I'm using Google Chrome 23.0.1271.101 on MacOS 10.8 (at the moment, at least). Thanks! - Mark -- Mark Kamichoff prox(a)prolixium.com http://www.prolixium.com/

1 0

Cisco MPLS networks with pseudowires
by Adam Armstrong 24 Dec '12

24 Dec '12

All, I'm looking at rewriting the Cisco pseudowire code, as it basically doesn't work properly at all. Do any of you have a small network using pseudowires (MPLS and/or L2TPv3) you don't mind giving SNMP access to, or a bunch of spare lab routers you could spare for a while to put up a test network? Only Cisco is really relevant at the moment, as the MIBs for doing this are vendor specific! :( Thanks, adam.

3 2

syslog date error
by Stefan Milo 24 Dec '12

24 Dec '12

Hi I've got syslog working like a charm... My devices are logging to my observium installation and the /syslog page are displaying everything nicely. But today something weird happened. The time is now 11:18 on december the 20th. But on the syslog page it says: Recent Syslog Messages 20th Dec 23:59:55 fw10 FILTERDNS : host_dns: failed looking up "CBB": hostname nor servname provided, or not known If i take a look in the database, the last syslog message is this one: 7 1 4 4 filterdns: 2012-12-20 11:15:03 FILTERDNS host_dns: failed looking up "TMP": hostname nor s... 1987 What's going on? :) BR Stefan Milo

2 3

esxi 5.1 cpu graph not working properly
by Stefan Milo 23 Dec '12

23 Dec '12

Hi I am having some issues with the CPU graph in my home lab with a small server running esxi 5.1 with a dual core amd cpu. I have attached a screenshot of the problem. The graph in observium seems to be following a path of its own. Even when doing som cpu burn tests, nothing happens. Any ideas? BR Stefan Milo Happy holidays

2 2

IPSEC tunnel count continuously increments
by Alex Pressé 20 Dec '12

20 Dec '12

I've built a DMVPN test network with one hub and one spoke and upon monitoring them, I notice the graph for IPSEC Active Tunnels (/graphs/type=device_cipsec_flow_tunnels) increments by one every hour - only on the spoke router, not on the hub. So I'm wondering where Observium is grabbing that piece of data from? Which SNMP OID? If I do a "show crypto eli" on the spoke, I have 2 active sessions (Observium now reports 66), and 12 on the hub (Observium reports 5). Any ideas? Thanks! -- Alex Presse "How much net work could a network work if a network could net work?"

3 4

Traffic Billing and Vlan
by Alex Vitola 18 Dec '12

18 Dec '12

it is possible to deploy traffic billing per vlan?

2 1

syslog log stor
by Vinoth Jijan 18 Dec '12

18 Dec '12

Hi Can we store the syslog of the network device in centralize log server using observium. If yes could you please share the configuration steps. Thanks in advance Kind Regards Vinoth Jijan .V Engineer - NOC Operations Phone: +91 9884942108 || http:// www.locuz.com

2 1

All Ports Pagination
by Matthias Cramer 17 Dec '12

17 Dec '12

Hi All I've noticed, that when I go to Ports->All Ports, all Ports are displayed instead of the first 100. When clicking Next or so, then the pagination works. Is this a bug or a feature ? Anyone has the same behaviour ? Regards Matthias -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zürich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250

3 2

SAN stats?
by Morgan McLean 15 Dec '12

15 Dec '12

Any potential plans to handle SAN stats? Luns, throughput, usage, iops, etc? No use in your environment? ;) -- Thanks, Morgan

2 1

voice monitoring anyone intersted?
by Nikolay Shopik 14 Dec '12

14 Dec '12

So just wondering is anyone interested in voice monitoring stuff to get added into observium? Lets say DIAL-CONTROL-MIB which allow you to know how much calls your current device processing + some success/failure/errors rate. Anyone using voice gateways here on looking forward for these features?

4 7

Re: [Observium] voice monitoring anyone intersted?
by Adam Armstrong 14 Dec '12

14 Dec '12

As if those output useful stats! :) Chris Stone <axisml(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Help request - Apache and Observium
by Adam Armstrong 14 Dec '12

14 Dec '12

you need to make sure mod_rewrite is enabled. You likely missed as step in the install guide. Adam Sairina Ingolma <sairina_s(a)centrum.cz> wrote: >Hello, >I'm student of Faculty of Applied Sciences (University of West Bohemia - Czech Republic) and I'm doing semester project about Observium. > I tried to instal and use this program. But when I intalled it on Debian I had problem. Main webpage of this program working but when I choose any item in menu then it show me "page not found". >For example: when I choose Overview than show me: > >Not Found > >The request URL/overview/ was not found on this server. >--- >Apache/2.2.16 (Debian) Server at localhost Port 80 > > >I found on some forum that I need to add line: >'AllowEncodedSlashes On' > >in Virtual host, but that isn't work. > > > >Please help. > >THX >Barbora S. > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Help request - Apache and Observium
by Sairina Ingolma 14 Dec '12

14 Dec '12

Hello, I'm student of Faculty of Applied Sciences (University of West Bohemia - Czech Republic) and I'm doing semester project about Observium. I tried to instal and use this program. But when I intalled it on Debian I had problem. Main webpage of this program working but when I choose any item in menu then it show me "page not found". For example: when I choose Overview than show me: Not Found The request URL/overview/ was not found on this server. --- Apache/2.2.16 (Debian) Server at localhost Port 80 I found on some forum that I need to add line: 'AllowEncodedSlashes On' in Virtual host, but that isn't work. Please help. THX Barbora S.

2 1

Temperature says 0 on ProCurve 82xx switch
by Mark Nellemann 14 Dec '12

14 Dec '12

Hi, Observium reads temperature as zero '0' from my HP ProCurve 8206zl switch. It's working fine on my 2900 switches. Any ideas on what I can do to get it working? /Mark

4 6

popup overview graph set positioning
by christopher barry 14 Dec '12

14 Dec '12

Greetings, Nice looking application. Playing with the demo now, and noticing that when I hover over a link (e.g. postman.memetic.org on URL http://demo.observium.org/devices/type=server/) it produces a slick overview popup. Unfortunately, much of the popup is below the edge of my browser, and moving my mouse makes the popup go away. I'm using chrome on debian wheezy, and I was wondering if this was the reason, or if the popup is just pinned to the mouse location. Seems like having the popup auto-adjust position to ensure it stays on the page would be a good optimization. It's also possible there is a workaround/preference I am unaware of (played with it for all of 10 minutes so far). -C

6 14

Cleaner look
by Maarten De Wispelaere 13 Dec '12

13 Dec '12

Hi everybody, Not sure who's responsible for the new, cleaner look - but I have to say: good work ! Thanks, Maarten

3 5

Lost graphs?
by Crozier, Doug 13 Dec '12

13 Dec '12

I just upgraded from 3472 t0 3488 and now the graphs are no longer displayed. Thanks Doug

4 7

Billing
by Adam Summerfield 13 Dec '12

13 Dec '12

One last issue, With latest version if you add two ports to a bill the description for the first entry shows under the second item and the description for the second item is not seen. If you have more than 2 interfaces in the bill - then the interface description information is offset by one and you don't see the last description. [cid:image001.png@01CDD91B.43A7FEC0] Regards, Adam

2 3

HTTP Error 500
by Adam Summerfield 13 Dec '12

13 Dec '12

We have just created a new virtal server for Obserium and are getting the following error when attempting to go the following URL... http://observium.harbour/ports/ HTTP Error 500 (Internal Server Error): An unexpected condition was encountered while the server was attempting to fulfil the request. Would appreciate any advice? Regards, Adam

3 7

Alert Question
by Lance Raymond 12 Dec '12

12 Dec '12

Sorry if this comes as a double post, as I sent it out, then was prompted to confirm my email to the list. If so, disregard (or answer since I haven't seen one yet) ;) So I have nagios running smooth for one company and working with another was introduced to observium. Interface is excellent, but I have 2 questions. 1. Alerts. I had a dev box hit around 97% disk space with no notice. So there is an alerts tab, but I don't see how to configure alerts, thresholds, etc. Looking at the wiki ( http://observium.org/wiki/Configuration_Options#Simple_API_Settings) I do see some things, but no simple [add alert] type thing, so is there something I can read, etc. as I continue to play? 2. Search header. The one I was shown before I did the install had the company logo (I see where to change that, colors, etc.) but they had the searchbar just not there (and I can see why). I can click the [hide] but I would like to completely remove it, but don't see where/how to accomplish. Again, sorry if this is a double, but I just saw my first one come through, so I know i'm in the loop. Tnx -- *e*. lraymond(a)weatherflow.com *c.* 386.561.1509 *f.* 386.409.5178

5 11

Re: [Observium] Out of curiosity, how big is everyones installation?
by Jukka Kosonen 12 Dec '12

12 Dec '12

Devices 480 (479 up 1 down 0 ignored 0 disabled ) Ports 20983 (11539 up 9019 down 0 ignored 425 shutdown ) Server is dual cpu (4 cores/cpu), 24GB RAM and 4x146GB 15k rpm disks in RAID10

1 0

Chrome issue with 6k Crossbar
by Robert Williams 11 Dec '12

11 Dec '12

Hi, There seems to be an issue with ‘Normal’ view and the Catalyst 6k Crossbar graph images in Chrome (latest 23.0.1271.95 m) It’s fine in Widescreen view and it’s also fine in Internet Explorer. Normal View: Widescreen View: Our SVN auto-updates so this has probably come with one of the most recent versions. No urgency at all and no feedback needed - just reporting it so it can be tweaked when convenient :) Cheers! Robert Williams Custodian DataCentre email: Robert(a)CustodianDC.com

1 0

Re: [Observium] Problems with setting up bills in rev0.12.12.3474
by Adam Armstrong 09 Dec '12

09 Dec '12

hmmm. I just tested this a few days ago on chrome. Which browser? Daniel Preussker <daniel(a)preussker.net> wrote: >Hi, > >it seems the JavaScript bugs when adding a bill, whenever I click on "Add Port" it redirects me back to "/#addport", displaying my log-overview. >Also adding a bill from the view of a port wont work either, even though I open "/bills/view=add/port=27/", the port is not added to the created bill. > >Is this a known "feauture"? >I remember having to add bills and services raw into the SQL, I dont mind doing so but I cant seem to find the wiki-entry for it again... > > >Cheers, > >Daniel Preussker > >[ Security Consultant, Network & Protocol Security and Cryptography >[ LPI & Novell Certified Linux Engineer and Researcher >[ +49 178 600 96 30 >[ Daniel(a)Preussker.Net >[ http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x87E736968E490AA1 > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 5

Problems with setting up bills in rev0.12.12.3474
by Daniel Preussker 08 Dec '12

08 Dec '12

Hi, it seems the JavaScript bugs when adding a bill, whenever I click on "Add Port" it redirects me back to "/#addport", displaying my log-overview. Also adding a bill from the view of a port wont work either, even though I open "/bills/view=add/port=27/", the port is not added to the created bill. Is this a known "feauture"? I remember having to add bills and services raw into the SQL, I dont mind doing so but I cant seem to find the wiki-entry for it again... Cheers, Daniel Preussker [ Security Consultant, Network & Protocol Security and Cryptography [ LPI & Novell Certified Linux Engineer and Researcher [ +49 178 600 96 30 [ Daniel(a)Preussker.Net [ http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x87E736968E490AA1

1 0

Moving an interface from one device to another and having the graph follow
by Jason Lixfeld 07 Dec '12

07 Dec '12

I just moved a transit link from router 1 to router 2. I cleared the old interface on router 1 and copied it to router 2. When I went back to my Observium graphs, the aggregate graphs picked up the interface in the transit aggregate graph, but all the old data was lost. I guess this doesn't really surprise me, although it might be kinda cool to have Observium automagically move the graph to the new interface if the new interface description matches, but that might be a little problematic if there was ever a case where a dedupe was required on interface descriptions, so I digress.. Is there a way to get that old data back somehow? Thanks in advance.

7 23

Re: [Observium] future of Service Monitoring & Discovery
by Daniel Preussker 06 Dec '12

06 Dec '12

Hi Tom, I've been afraid you would say something like that. Lets just hope there'll be a replacement in future... About Nagios, I've been on nagios for quite a while now and just switched back to Observium once again. I definitely prefer Observium over Nagios to be honest, after all I always ended up with Observium in the end ;) However, I could imagine an NMap integration into Observium for probing Ports and Services; Since Observium already knows which ports are open, it should be possible to wrap NMap in a shell-script and let it execute along service-polling for probing and service analysis. Cheers, Daniel Preussker [ Security Consultant, Network & Protocol Security and Cryptography [ LPI & Novell Certified Linux Engineer and Researcher [ +49 178 600 96 30 [ Daniel(a)Preussker.Net [ http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x87E736968E490AA1

1 0

future of Service Monitoring & Discovery
by Daniel Preussker 06 Dec '12

06 Dec '12

Hello Obversium-List, I've read on the wiki (http://observium.org/wiki/Services) that Services are going to be removed in future. Will there be a replacement without extra software on the clients? Alternatively, whats the most efficient way of monitoring TCP/UDP Port states when Services are being removed? Thanks and Kind regards from snow-white germany, Daniel Preussker [ Security Consultant, Network & Protocol Security and Cryptography [ LPI & Novell Certified Linux Engineer and Researcher [ +49 178 600 96 30 [ Daniel(a)Preussker.Net [ http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x87E736968E490AA1

2 1

Out of curiosity, how big is everyones installation?
by Morgan McLean 04 Dec '12

04 Dec '12

Just curious what the average size of an observium installation is among the users on the email list. I have ~150 devices with ~6000 ports across three sites. Anybody else? Morgan

23 37

Wrong VLAN port member info
by Zafar Pravaiz 04 Dec '12

04 Dec '12

HI All There is something wrong on VLAN info page. I see incorrect no of port in a VLAN in observium while on switch its different. Please see the attachment. Am i missing something ? Thanks -- *Zafar Pravaiz *IT Senior Systems Engineer Information Technology Department AUS /> <span style='font-size:10.0pt;font-family:Times;mso-bidi-font-family: Tel +971 6 515 2164 Fax +971 6515 2112 American University of Sharjah PO Box 26666, Sharjah United Arab Emirates http://www.aus.edu <http://www.aus.edu/> zpravaiz(a)aus.edu <mailto:youremail@aus.edu>

4 5

Transparent background
by Mike 29 Nov '12

29 Nov '12

Hello. After the recent commits, all popup graphs are displayed with a transparent background. It is not pretty. Thanks -- Mike Stupalov

4 3

Missing info
by Mike Richardson 29 Nov '12

29 Nov '12

Hiya, We're just started using Observium and are quite impressed. We've added a few of our devices - just the key ones. What were seeing is that for the devices they are missing some of the data. For example the following tabs are missing - Health, VLANs, Map and Inventory. The environment panels are missing (Processors, Memory etc.) The poller is running successfully and the port information is being populated and graphs are draw correctly. What we're not doing is running the Discover command. AFAICT it will add to Observium devices it finds from CDP as a matter of course. We don't want that to happen. My uneducated guess is that the discover command is also picking up some of the information we're missing. (I've run the command briefly then killed it when I realised what it was doing, and some of the devices are populated with Health, VLANs etc.) If I'm right, is there a way to gather the above information about the devices already present but not add any more? I've got: $config['dp_autocreate'] = false; ## Autodiscover unknown hosts seen via discovery protocols in the config but discover still seems to add new devices. If I'm wrong then could someone set me straight please? Thanks, Mike -- Mike Richardson Networks (network(a)manchester.ac.uk) IT Services, University of Manchester *Plain text only please - attachments stripped on arrival*

3 4

Re: [Observium] 404 page problem on fresh installation
by Rompetechos rompetechos 28 Nov '12

28 Nov '12

I think, that may be other thing, because mod_rewrite is enabled and the directory of installation has the AllowOverride Option. Any more sugestion? Thanks for the help

2 1

Re: [Observium] can't get syslog working
by Tom Laermans 27 Nov '12

27 Nov '12

Hi, Did you follow the documentation on the website? The fact that you "tried with 2 different daemons" leads me to believe that you didn't... Tom Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Stefan Milo" <stefan(a)zendata.dk> To: "observium(a)observium.org" <observium(a)observium.org> Subject: [Observium] can't get syslog working Date: Mon, Nov 26, 2012 17:40 Hi I'm having a hard time getting syslog to work. I've enabled the syslog menu in config.php by inserting "$config['enable_syslog'] = 1;" Ive tried using both rsyslog and syslog-ng. But the syslog menu in observium is just blank? The syslog server is working and receiving info on udp port 514. 2012 Nov 26 17:35:36 10.0.0.33 Address=10.0.0.253 This is a test message generated by Kiwi SyslogGen Any advice? BR Stefan Milo Noobie Observium User _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 15

404 page problem on fresh installation
by Rompetechos rompetechos 27 Nov '12

27 Nov '12

I have a fresh installation of Observium on Centos 6 64 bits. I can see the main page without problems, but when a i try to click on any page, devices, locations, etc i get a 404 code. The installation is on a dedicate vhost, any idea of what can be wrong?. Thanks in advanced

2 1

question about arista devices
by Maarten Kruyswijk 27 Nov '12

27 Nov '12

Hi we have added a couple of arista devices to observium. But we are missing a few things. Ospf neighbours are not showing. The routing tab on the device page is not showing And the config tab is not coming up on the device page. Are we doing something wrong? Or is it something we can easily fix? Kind regards, maarten

3 8

30 minute poll issue
by Robert Williams 26 Nov '12

26 Nov '12

Hi Guys, Got a weird issue which has just started, seemingly by itself but I imagine there was a cause (I just don't know it yet!). In short, every 30 minute the poller decides that approximately a third of all devices (92 in total) are 'Offline'. They then magically recover on the next poller interval. The devices are not offline, and the Observium host does not loose connectivity (I've tested with numerous pings etc. during this predictable failure period). Interestingly, the host on which Observium runs does record these interesting CPU and RAM metrics during that particular polling run: [cid:image001.png@01CDCBDF.93DC5B50] [cid:image002.png@01CDCBDF.93DC5B50] Now, I'm guessing that there is maybe a more substantial 'discovery' run or similar every 30 minutes. For some reason, this more intensive run seems to be resulting in a load of devices going allegedly offline. The problem started on Friday around 11pm and has repeated like clockwork since. We are running the latest SVN. I'm a bit uncertain where to start with this one as although it's predictable I can't really see anything which would cause it to happen. Pointers for diagnosing further very welcome :) Cheers as always! Robert Williams Custodian DataCentre email: Robert(a)CustodianDC.com

3 12

Re: [Observium] 30 minute poll issue
by Tom Laermans 26 Nov '12

26 Nov '12

The poller doesnt run 'out of time', no hosts are ever skipped. The poller simply runs to completion. If it takes longer than 5 minutes, it simply starts a new one while the other is still running, which may blow up your system in the longer run. Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Robert Williams" <Robert(a)CustodianDC.com> To: "'Observium Network Observation System'" <observium(a)observium.org> Subject: [Observium] 30 minute poll issue Date: Mon, Nov 26, 2012 21:09 Hi – yes it is indeed virtualised, the host is a Dell R710 - 12 Cores @ 2.4GHz / 16GB according to ESX. It’s running on an enterprise grade Kingston SSD, along with Cacti. The host is fairly low-load (it only runs a few monitoring systems and a couple of virtual routers). CPU and network load on the physical host for today are: It has a 1GB NIC and I’ve already checked but over the last 4 hours it hasn’t dropped a single ICMP ping to any of the 4 targets I’ve been continuously polling directly from the Observium VM. Three of the targets were repeatedly showing as down, until I suspended a few hosts on the total devices list. For what it’s worth, the other monitoring instance on there (Cacti) has about 7,000 data sources and isn’t missing a single one. It is on a one-minute polling interval and takes between 10 and 12 seconds to complete. Observium has also been flawless up until now. Interestingly, at 19:10 I moved to the poller-wrapper and re-enabled the hosts that I had disabled. Now CPU usage during each poll is approx 2x and the duration of the polling event is now about 45 seconds according to the wrapper. Since that change, I’ve not had a host go down? It could be coincidence, so I’m going to leave it overnight without making any other changes and see if by the morning it has started doing it again. Out of curiosity - is it possible, with a single poller instance (i.e. what I had before) that should a host respond correctly to the first SNMP get / ping, but then take a very long time to respond to the rest of the polls (say 5 seconds per OID), that it could delay the polling process enough for it to run out of time before hitting all the targets? Thus declare the rest it missed as ‘down’ because it never got around to them? I only ask because if this is possible then it could explain why adding more hosts could lead to this as there are a couple which I know are particularly slow to respond. Specifically they are hardware-integrated SNMP modules on systems which run tiny ARM chips and linux 2.4.21-rmk1. They are _slow_ to get their answers back, especially if two systems are concurrently polling them. If it isn’t possible, then that’s obviously off the mark, but the fact that the wrapper (appears) to have resolved it makes me wonder enough to ask :) Cheers! Robert Williams Custodian DataCentre email: Robert(a)CustodianDC.com From: observium-bounces(a)observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 26 November 2012 19:49 To: Observium Network Observation System Subject: Re: [Observium] 30 minute poll issue Almost all recent changes have been web-interface related. We did change the loop around the rrdtool binary, but that shouldn't affect polling. Detecting up/down doesn't really have any prerequisites. It does an ICMP ping and a UDP snmpget. If either of those fail to return, and the host isn't already down, it changes the value in the database to down and skips the rest of the poll. There is nothing really code-related that could cause the effects you're seeing, only the return packets failing to reach the PHP process in time. This kind of thing isn't even observed on very, very heavily loaded systems. Is this a virtualised system? adam. On 26/11/2012 13:27, Robert Williams wrote:Hi, well any ignoring you think I’m doing is certainly not the case – you said to check for other cron jobs and I did. There aren’t any (literally, this system has only Observium on it). I also checked for any processes running at the point of the ‘host down’ events as was also suggested; the only one is the poller / php process itself. Which takes more CPU on every 6th poll, but nothing more interesting than that. If there were other suggestions then I’m really sorry I’ve obviously missed them (which is quite likely as I’ve noticed before some postings from this list have been dropped by our filtering system). Either way, I’m certainly not ignoring you, I think it would be a bit stupid to ignore any advice from the creator of the product which you are having trouble with :) Always suspect the last change you made broke it – so since there were five or six hosts added last week my initial suspicion was maybe the poller was running out of time. The higher number hosts failing, in order, suggested to me that (assuming it polls them in numerical order) again maybe it is running out of time before completing. This was slightly confirmed by removing hosts at random and suddenly the problem went away. I’m just trying to fault-find at the same time as asking for pointers and I’m happy to check anything that anyone on here may suggest. Incidentally I’m just deploying Job’s poller-wrapper script which I’ve been meaning to do for a while but never got around to it. I’ll know in 30 minutes or so if it’s helped at all and I’ll let you know. In the meantime, please do let me know if I’ve missed or ignored something, as I’ve most certainly not intended to – cheers! Robert WilliamsCustodian DataCentreemail: Robert(a)CustodianDC.com From: observium-bounces(a)observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 26 November 2012 18:59 To: Observium Network Observation System Subject: Re: [Observium] 30 minute poll issue You're looking in completely the wrong place, and you've totally ignored everything i've said, so I give up. have fun. On 26/11/2012 12:24, Robert Williams wrote:Right – I’ve disabled a few of the recent additions and each time I disable one the number of hosts which are ‘down’ decreases. Now, with 3 hosts disabled I only have 2 hosts which are failing. Also, the hosts which fail are always numbered sequentially and are always high-numbered, say above host ID 90. Is it possible the poller is simply running out of time? Can the time be extended? Either way, why only on exactly every 6 polls / 30 minutes? Weird… Robert WilliamsCustodian DataCentreemail: Robert(a)CustodianDC.com From: observium-bounces(a)observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 26 November 2012 16:58 To: Observium Network Observation System Subject: Re: [Observium] 30 minute poll issue Btw, when one single installation out of thousands starts doing something like this, it's almost never related to the code, and almost always related to the system it's installed on. adam. On 26/11/2012 10:38, Robert Williams wrote:Hi – no other cron jobs on that box, it’s purely running Observium and the only jobs are the poller itself and a selection of jobs which run at weekly or daily intervals for various system functions. There is also a weekly SVN pull for Observium :) As a test we have removed the most recently added device to see if that helps, but I could do with some way of recording what is happening on that particular poll. It’s like clockwork but I can’t see anything that would cause that on the network side, and everything definitely responds (from the Observium console) 100% during the poll itself. Cheers! Robert WilliamsCustodian DataCentreemail: Robert(a)CustodianDC.com From: observium-bounces(a)observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 26 November 2012 16:07 To: Observium Network Observation System Subject: Re: [Observium] 30 minute poll issue Look for other, newly added cron jobs. Discovery is only run once every 6 hours. It's pretty difficult to make the poller believe that something is offline without network issues, as all it does to decide is a ping and an snmp get. adam. On 26/11/2012 08:14, Robert Williams wrote:Hi Guys, Got a weird issue which has just started, seemingly by itself but I imagine there was a cause (I just don’t know it yet!). In short, every 30 minute the poller decides that approximately a third of all devices (92 in total) are ‘Offline’. They then magically recover on the next poller interval. The devices are not offline, and the Observium host does not loose connectivity (I’ve tested with numerous pings etc. during this predictable failure period). Interestingly, the host on which Observium runs does record these interesting CPU and RAM metrics during that particular polling run: Now, I’m guessing that there is maybe a more substantial ‘discovery’ run or similar every 30 minutes. For some reason, this more intensive run seems to be resulting in a load of devices going allegedly offline. The problem started on Friday around 11pm and has repeated like clockwork since. We are running the latest SVN. I’m a bit uncertain where to start with this one as although it’s predictable I can’t really see anything which would cause it to happen. Pointers for diagnosing further very welcome J Cheers as always! Robert WilliamsCustodian DataCentreemail: Robert(a)CustodianDC.com _______________________________________________observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

can't get syslog working
by Stefan Milo 26 Nov '12

26 Nov '12

Hi I'm having a hard time getting syslog to work. I've enabled the syslog menu in config.php by inserting "$config['enable_syslog'] = 1;" Ive tried using both rsyslog and syslog-ng. But the syslog menu in observium is just blank? The syslog server is working and receiving info on udp port 514. 2012 Nov 26 17:35:36 10.0.0.33 Address=10.0.0.253 This is a test message generated by Kiwi SyslogGen Any advice? BR Stefan Milo Noobie Observium User

1 0

adding ATM0 port
by Norman Daniel 26 Nov '12

26 Nov '12

I have an 878 router with SHDSL interface, it shows ATM0 in inventory but no statistics or port discovered.

3 2

Observium stopped graphing and not showing anything on "ports" Tab
by Timo Ament 21 Nov '12

21 Nov '12

Hey Guys, I'm fairly new to Observium. This monday my observium installation suddenly stopped populating the Graphs and when on the Page of a device selecting the POrts-Tab the site is now empty. Do you have a hint where to check? Regards Timo

2 1

upgrading ios cause new sensors oid appear
by Nikolay Shopik 19 Nov '12

19 Nov '12

Hi, So we just upgraded one our cisco7201 device from 15.0(1)M3 to 15.1(3)S4, and all sensors data disappear, after while it rediscover some of them but using different(?) OID. At least what I see is, old RRD files still exist but no longer updated, here is example new files: mempool-cemp-4.1.rrd mempool-cemp-4.2.rrd mempool-cemp-4.3.rrd and old mempool-cemp-3.1.rrd mempool-cemp-3.2.rrd mempool-cemp-3.3.rrd Temperature sensors move into different MIB? because old files was: sensor-temperature-cisco-entity-sensor-19.rrd sensor-temperature-cisco-entity-sensor-18.rrd sensor-temperature-cisco-entity-sensor-17.rrd and new: sensor-temperature-cisco-2.rrd sensor-temperature-cisco-3.rrd sensor-temperature-cisco-1.rrd All voltage sensors now gone, which is kinda weird, but probably is some kind cisco weirdness or just move them to other MIB. Is this some kind Cisco MIB(OID) mess we have here or something else?

2 3

Switch 4510G 48-Port
by Alex Vitola 19 Nov '12

19 Nov '12

Currently I have two Switch 4510G 48-Port Software Version 5.20 Release 2202P18, and is not generated graphics of Memory, CPU and Temperature. I saw that this switch is not officially supported. As I understand I need to make this switch model files in the directories: / opt / observium / includes / discovery / temperature / opt / observium / includes / discovery / processors / opt / observium / includes / discovery / mempools Is this correct? Somebody use this model?

3 3

VMware VM's vanished
by Robert Williams 17 Nov '12

17 Nov '12

Hi all, I recently added all our ESXi hosts to Observium, previously they were only in our other systems. I was pleased to see all the VMs appear on it (this didn't work last time I tried about a year ago, which is why they weren't in Observium). However, about an hour later I checked up on them and they have all disappeared; well, sort of: [cid:image001.png@01CDC4B4.8D572B70] All of this 'was' correct (honest) when I first added them. The same is true for all the hosts I've added, although they do all have the correct number of 'blank' entries though? Attached is the slightly cleaned-up output from a debug run on one of the ESX hosts. Any thoughts welcome :) Cheers, Robert Williams Custodian DataCentre email: Robert(a)CustodianDC.com

2 2

A couple of questions on port details
by Aaron Mayfield 16 Nov '12

16 Nov '12

1. I notice that with the Real time graph running on a port, quite often the graph will calculate a negative number resulting in gaps in the graphs. Has anyone else experienced this? Is it expected? 2. The Arp Table output for my ports are blank. Does this feature work for you? If so, does anyone have this working with Arista switches?

5 8

Suggestion: All Ports
by Mattias Gyllenvarg 16 Nov '12

16 Nov '12

Hi As our installation is getting heavy and I have seen more and more use for the "Ports/All Ports" page. I becomes clear that the page should not load anything but the search bar until you actually klick the search button. Saves me some minutes of waiting everyday. -- *Med Vänliga Hälsningar - Best Regards* *Mattias Gyllenvarg* *Nätutveckling* Bredband2 Tel: +46 406219712

5 11

Alerting Contrib?
by Storer, Darren 15 Nov '12

15 Nov '12

Hi, I recently had a very good experience setting up Observium with in a mixed switch, router and server environment; everything was so much slicker than Nagios. Despite the inclusion of "Alerting" tabs, I was assured on the IRC channel that there is no alerting functionality with Obs at this time. Has anyone produced their own addon/scripts/strategy for basic alerting? Best regards Darren

4 6

6500 Fabric Ingress/Egress scale
by Robert Williams 11 Nov '12

11 Nov '12

Hi Guys, Firstly, apologies for the screen-shots / attachments, but they are required to demonstrate the oddness... I think there is a scaling issue on (or I'm not understanding) the Fabric load bars for the Catalyst 6k. In short, the load bars (to the right of the mini-graph) always seem to show zero, or near zero, even though load is not zero. Example below or attached (or missing, depending on how this list handles images :)) [cid:image003.png@01CDBF49.C8C03550] All bars are showing 2% Ingress and 1% Egress. Below is a zoomed in version of the graphic for Slot 1 Fabric 0: [cid:image002.png@01CDBF48.A37B26C0] This shows ingress is 4% and egress is 2% right now. Load is quite low at the moment so it's not an excellent example I agree - but I can honestly say that even when it's high the most I see on those bars is 2%. So, am I being stupid (quite possible) and these bars mean something else or is there some sort of issue with them or their maths? We have 11 of these chassis, and I've checked them all. They all either show zero or are reading 1 or 2% despite having much higher real loads. Such as this one: [cid:image001.png@01CDBF49.E3BFD450] Maybe if anyone else can check their bars and let me know if it's just me? Cheers! Robert Williams Custodian DataCentre email: Robert(a)CustodianDC.com

4 9

Important: alert mails disabled by default
by Tom Laermans 10 Nov '12

10 Nov '12

Hi, This is a notification about an important change! In some cases, Observium sends out alert emails upon events. While we always advised to disable these as they are mostly rubbish, they were, until now, enabled by default. They are now disabled, since revision 3406. This means that when you update you will no longer receive the alert emails. If you want to keep receiving these alerts after you svn up to r3406 or higher, add this to your config.php: $config['alerts']['email']['enable'] = TRUE Hopefully we'll have a decent threshold/event/alert system soon; ideas about this are very welcome in our IRC channel. Tom

1 0

Maps.php
by Dermot Williams 09 Nov '12

09 Nov '12

Hi, Quick question (the answer to which is possibly 'nothing') but - what is map.php supposed to do? - Dermot

5 15

scaling towards >100GE LAGs
by Job Snijders 09 Nov '12

09 Nov '12

Hi all, I was facing some issues with observium and 16x10GE LAGs, where RRD would flip the finger on me. I propose we let the RRDs accept up to a terabit/sec instead of the current 100gigabit/sec limit. In a year or so we can up it again. :-) (or make it a configurable option!) BTW: If you currently have ports which go over 100GE you need to use 'rrdtool dump' -> edit xml file and change "1.2500000000e+10" to "1.2500000000e+11" and then use 'rrdtool restore' to get the XML back into RRD format. root@observium:/opt/observium# diff includes/polling/ports.inc.php.orig includes/polling/ports.inc.php 339,353c339,353 < DS:INOCTETS:DERIVE:600:0:12500000000 \ < DS:OUTOCTETS:DERIVE:600:0:12500000000 \ < DS:INERRORS:DERIVE:600:0:12500000000 \ < DS:OUTERRORS:DERIVE:600:0:12500000000 \ < DS:INUCASTPKTS:DERIVE:600:0:12500000000 \ < DS:OUTUCASTPKTS:DERIVE:600:0:12500000000 \ < DS:INNUCASTPKTS:DERIVE:600:0:12500000000 \ < DS:OUTNUCASTPKTS:DERIVE:600:0:12500000000 \ < DS:INDISCARDS:DERIVE:600:0:12500000000 \ < DS:OUTDISCARDS:DERIVE:600:0:12500000000 \ < DS:INUNKNOWNPROTOS:DERIVE:600:0:12500000000 \ < DS:INBROADCASTPKTS:DERIVE:600:0:12500000000 \ < DS:OUTBROADCASTPKTS:DERIVE:600:0:12500000000 \ < DS:INMULTICASTPKTS:DERIVE:600:0:12500000000 \ < DS:OUTMULTICASTPKTS:DERIVE:600:0:12500000000 ".$config['rrd_rra']); --- > DS:INOCTETS:DERIVE:600:0:125000000000 \ > DS:OUTOCTETS:DERIVE:600:0:125000000000 \ > DS:INERRORS:DERIVE:600:0:125000000000 \ > DS:OUTERRORS:DERIVE:600:0:125000000000 \ > DS:INUCASTPKTS:DERIVE:600:0:125000000000 \ > DS:OUTUCASTPKTS:DERIVE:600:0:125000000000 \ > DS:INNUCASTPKTS:DERIVE:600:0:125000000000 \ > DS:OUTNUCASTPKTS:DERIVE:600:0:125000000000 \ > DS:INDISCARDS:DERIVE:600:0:125000000000 \ > DS:OUTDISCARDS:DERIVE:600:0:125000000000 \ > DS:INUNKNOWNPROTOS:DERIVE:600:0:125000000000 \ > DS:INBROADCASTPKTS:DERIVE:600:0:125000000000 \ > DS:OUTBROADCASTPKTS:DERIVE:600:0:125000000000 \ > DS:INMULTICASTPKTS:DERIVE:600:0:125000000000 \ > DS:OUTMULTICASTPKTS:DERIVE:600:0:125000000000 ".$config['rrd_rra']); root@observium:/opt/observium# Kind regards, Job Snijders -- AS5580 - Atrato IP Networks

2 2

Re: [Observium] observium Digest, Vol 28, Issue 7
by Joshua Lebo 08 Nov '12

08 Nov '12

77 Devices with 2686 ports. > On Nov 7, 2012, at 1:07 AM, Morgan McLean wrote: > > > Just curious what the average size of an observium installation is among > the users on the email list. > > > > I have ~150 devices with ~6000 ports across three sites. Anybody else? > > > > Morgan > > _______________________________________________ > > observium mailing list > > observium(a)observium.org > > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >

2 1

Re: [Observium] Out of curiosity, how big is everyones installation?
by Steve Costaras 07 Nov '12

07 Nov '12

would be possible, but would much rather have that as a php or other plugin to the gui so it can happen all on the same screen/time of object creation/deletion. It avoids having people who do NOT have unix skills needing to get into the os for simple day/day operation (which here is adding/removing devices). This though is secondary to grouping for large deployments. I'm only dealing with one small site currently, but we numerous soho and other locations around the world and ancillary sites/DC's. using dns name doesn't work when there are hundreds/thousands of devices of the same types (takes /way/ to long to find what you're looking for or to focus on only certain logical groupings of devices. community strings don't work as there is no central authority to control what goes into that field (not all devices are controlled by us, but we're tasked to monitor/trend/troublehsoot). >-----Original Message----- >From: Tom Laermans [mailto:tom.laermans@powersource.cx] >Sent: Wednesday, November 7, 2012 07:07 AM >To: observium(a)observium.org >Subject: Re: [Observium] Out of curiosity, how big is everyones installation? > >Indeed - smokeping integration in Observium will never(*) write into >other config files; just like we won't add devices to rancid, etc. >Scripting against mysql -e "SELECT hostname FROM devices" output is easy >though. > >(*) right to change reserved > >On 7/11/2012 14:04, Jason Lixfeld wrote: >> Why not write a script to pull the hostnames out of the database at some internal into the smokeping config file? >> >> -- >> >> Sent from my mobile device >> >> >> On 2012-11-07, at 8:00 AM, "Steve Costaras" <stevecs(a)chaven.com> wrote: >> >>>> -----Original Message----- >>>> From: Mattias Gyllenvarg [mailto:Mattias.Gyllenvarg@Bredband2.se] >>>> Only our Core/Dist devices are in Observium >>>> >>>> Devices 183 ( 177 up 1 down 2 ignored 3 disabled ) >>>> Ports 9019 ( 4222 up 179 down 542 ignored 3957 shutdown ) >>>> >>>> Access devices (1500 more) may be added if there had been a good way too >>>> categorize. >>> Still testing/playing here with only 80 devices 4077 ports, but the above sentiments are shared, we have several thousand more devices as well, but without a grouping/categorization system as well as some tighter integration w/ smokeping (so by adding the device in the gui it creates/adds it in the smokeping configuration) don't see this really continuing. >>> >>> Also starting to look at Reconnoiter and other tools. >>> >>> >>> >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

1 0

Re: [Observium] Out of curiosity, how big is everyones installation?
by Steve Costaras 07 Nov '12

07 Nov '12

>-----Original Message----- >From: Mattias Gyllenvarg [mailto:Mattias.Gyllenvarg@Bredband2.se] >Only our Core/Dist devices are in Observium > >Devices 183 ( 177 up 1 down 2 ignored 3 disabled ) >Ports 9019 ( 4222 up 179 down 542 ignored 3957 shutdown ) > >Access devices (1500 more) may be added if there had been a good way too >categorize. > Still testing/playing here with only 80 devices 4077 ports, but the above sentiments are shared, we have several thousand more devices as well, but without a grouping/categorization system as well as some tighter integration w/ smokeping (so by adding the device in the gui it creates/adds it in the smokeping configuration) don't see this really continuing. Also starting to look at Reconnoiter and other tools.

3 2

Re: [Observium] observium Digest, Vol 28, Issue 5
by Dan Nelson 07 Nov '12

07 Nov '12

1 Virtual Server, 67 Devices, 1265 Ports running great. Thanks Dan Nelson Nutraceutical Corporation Network Administrator 801-334-3702

1 0

Procedure to add a MIB file for a device already monitored by Observium
by Charles Nadeau 01 Nov '12

01 Nov '12

Hello, I put a MIB file in /opt/observium/mibs/ for a device whose interfaces I already monitor with SNMP. In order to have Observium uses the MIB to monitor all its components do I just run "/opt/observium/discovery.php -h new" again or do I have to modify "config.php" then run "/opt/observium/discovery.php -h new"? Thanks! Charles -- Charles Nadeau Ph.D. http://charlesnadeau.blogspot.com/

3 2

Re: [Observium] observium Digest, Vol 28, Issue 1
by Charles Nadeau 01 Nov '12

01 Nov '12

On Thu, Nov 1, 2012 at 8:00 PM, <observium-request(a)observium.org> wrote: > Date: Thu, 01 Nov 2012 12:43:25 +0400 > From: Nikolay Shopik <shopik(a)inblock.ru> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Procedure to add a MIB file for a device > already monitored by Observium > Message-ID: <5092362D.9000403(a)inblock.ru> > Content-Type: text/plain; charset=UTF-8 > > Nope, > > MIB just describe these counters it won't add support to observium. > Patch is need to add support of new device/mib Can you tell me where and what to add, I could give it a go then share it if I am successful. Thanks! Charles

2 1

IP SLA
by John Macleod 30 Oct '12

30 Oct '12

I have setup two devices with IP SLA, however I am not getting anything in Observium. One is a Cisco 877W 12.4(24)T6, the other is a Cisco 2901 15.1(4)M3. I verified that the IP SLA module is enabled, I must be missing something?

6 16

fresh installation, no login screen
by Elad Eyal (Ubiqam) 29 Oct '12

29 Oct '12

I've followed the installation instructions to the letter, and while I can get to the observium webpage, I can see observium logo and the text "Big Graphs | Widescreen | Not logged in!" on the top right of the page, I can't see anything else. Furthermore, when I look at the HTML source of the page delivered, it ends with " Not logged in!" and not with </HTML> as I would expect. The machine is a brand new Amazon EC3 VM running Ubuntu 12.04.1 LTS. I'd appriciate any help. I don't see anything of interest in the apache logs. The same client (browser) works OK for the live demo. thanks Elad

4 4

Custom port descriptinos
by Michael Cushard 26 Oct '12

26 Oct '12

Hi, I see that the ability to add custom port descriptins is available, but I cannot find any instructions to how to actually do it. What is the procedure for adding custom port descriptions? Regards, Michael Cushard

1 0

Device Traffic Graph
by Bruno Galeppe 25 Oct '12

25 Oct '12

Hi, I set up several devices on Obervium, no problem so far, except for the Traffic Graphs which remain empty. For example : http://img4.hostingpics.net/pics/168961data.jpg The RRD file exist, but the data always return 0.00 How can I debug that ? Is there an snmpwalk command to help understand the problem ? Regards,

4 21

Various questions (BGP/Discovery/Pseudowires/Hostname truncating)
by Jason Lixfeld 22 Oct '12

22 Oct '12

First off, let me say thanks to the developers of Observium. This piece of code is one of the most amazing pieces of code I have used for my network monitoring purposes to date. I have a few questions that I'm hoping someone can answer - BGP: ---- I have a few eBGP speakers that live inside a VRF. Observium picks up the VRFs just fine, but the routing tab for the device only seems to show the BGP sessions that exist in the global (non-VRF) table. Is it possible to show the BGP sessions that exist inside a VRF? Pseudowires: ------------ I see lots of data inside the pseudowires table on the observium database, but I don't see any of that inside the pseudowires tab from within a device where I know pseudowires are configured. These pseudowires exist on IOS boxes, IOS-XR boxes and IOS-XE boxes. I do see a few. Observium > Ports > Pseudowires shows me 11 pseuowires. 6 of them are duplicates of one another while 5 are unique. The database shows hundreds. While looking through a ./discovery.php -d I ran against one of our XR boxes, I did see this: Cisco Pseudowires : SQL[SELECT * FROM `pseudowires` WHERE `device_id` = '1'] DEBUG: SNMP Auth options = -v2c -c ************ /usr/bin/snmpbulkwalk -v2c -c ************ -OQUs -m CISCO-IETF-PW-MPLS-MIB -M /opt/observium/mibs udp:router:161 cpwVcID cpwVcID = No Such Instance currently exists at this OID DEBUG: SNMP Auth options = -v2c -c ************ /usr/bin/snmpbulkwalk -v2c -c ************ -OQUs -m CISCO-IETF-PW-MPLS-MIB -M /opt/observium/mibs udp:router:161 cpwVcName cpwVcName = No Such Instance currently exists at this OID DEBUG: SNMP Auth options = -v2c -c ************ /usr/bin/snmpbulkwalk -v2c -c ************ -OQUs -m CISCO-IETF-PW-MPLS-MIB -M /opt/observium/mibs udp:router:161 cpwVcType cpwVcType = No Such Instance currently exists at this OID DEBUG: SNMP Auth options = -v2c -c ************ /usr/bin/snmpbulkwalk -v2c -c ************ -OQUs -m CISCO-IETF-PW-MPLS-MIB -M /opt/observium/mibs udp:router:161 cpwVcPsnType cpwVcPsnType = No Such Instance currently exists at this OID DEBUG: SNMP Auth options = -v2c -c ************ /usr/bin/snmpbulkwalk -v2c -c ************ -OQUs -m CISCO-IETF-PW-MPLS-MIB -M /opt/observium/mibs udp:router:161 cpwVcDescr cpwVcDescr = No Such Instance currently exists at this OID DEBUG: SNMP Auth options = -v2c -c ************ /usr/bin/snmpbulkwalk -v2c -c ************ -OQUs -m CISCO-IETF-PW-MPLS-MIB -M /opt/observium/mibs udp:router:161 cpwVcMplsPeerLdpID cpwVcMplsPeerLdpID = No Such Instance currently exists at this OID That seems to show that pseudowire support for XR isn't there yet? Is that on the road map, by chance? Discovery: ---------- There are a couple of devices that aren't getting discovered for some reason. The IP that their hostname resolves to is within the 'nets' arrays configured inside config.php and I have other SNMP devices that reach those boxes, so I know the SNMP side is sound. Likewise, I can see the device in question in the CDP table of an adjacent device, so I know that part is working as well. I've looked at a ./discovery -d of an adjacent device hoping to see a clue about why the device is being skipped, but nothing is striking out at me. Hostname truncating: -------------------- We name our devices <device><device_number>.<pop>.<city>.domain.tld. In the devices view, it shows the full device name no problem. In the VRF view, for example, however, it shows only <device><device_number>, truncating the pop and city portions. If anyone has any insight or guidance on these issues, I'd be grateful! Thanks in advance.

2 3

Unable to get non-MySQL Auth working - 500 error
by Chris Moody 19 Oct '12

19 Oct '12

Hello. First off, let me say that this project is AWESOME!!! I am blown away at how comprehensive the graphing is across our network gear. Bravo. That said, I need a hand in figuring out why I cannot seem to get any auth-method other than mysql to work. If I so much as toggle to any other auth-method (ldap or http-auth), I immediately get a 500 'Internal Error' when I try to hit the Observium login page. I'm ultimately trying to get auth to the application to be handled via LDAP, but I can do it via either the observium-ldap component or via http-auth combined with mod_authz_ldap... makes me no difference. I've had some success w. mod_authz_ldap in that I can get authentication to actually pass for a user account (I am able to bypass the login promptsuccessfully), but as soon as I auth, I hit the dreaded 500. I'm not able to find anything in any http logs regarding what might be possibly throwing the 500. lsof lists any open filehandles for httpd, so I've checked every possible file that logs could be directed to, but no cluesthus far. This particular box is a RHEL5 running Observium 0.12.10.3396 Any ideas are welcome. Cheers, -Chris

2 1

unix agent polling broken in 3397 - likely a couple of versions before too
by Chris Stone 18 Oct '12

18 Oct '12

No data for servers using the unix agent for a couple of weeks now. Have Observium build 3397 installed. Just had a chance to do some troubleshooting... Running poller update on a specific server in debug mode reveals the apparent problem: ======================================================================================= including: includes/polling/unix_agent.inc.php PHP Warning: include(includes/polling/unix_agent.inc.php): failed to open stream: No such file or directory in /opt/observium/includes/polling/functions.inc.php on line 192 Warning: include(includes/polling/unix_agent.inc.php): failed to open stream: No such file or directory in /opt/observium/includes/polling/functions.inc.php on line 192 PHP Warning: include(): Failed opening 'includes/polling/unix_agent.inc.php' for inclusion (include_path='.:/usr/share/pear:/usr/share/php') in /opt/observium/includes/polling/functions.inc.php on line 192 Warning: include(): Failed opening 'includes/polling/unix_agent.inc.php' for inclusion (include_path='.:/usr/share/pear:/usr/share/php') in /opt/observium/includes/polling/functions.inc.php on line 192 ======================================================================================= Fixed (worked around) by running: ln -s /opt/observium/includes/polling/unix-agent.inc.php /opt/observium/includes/polling/unix_agent.inc.php Added to Jira as well: http://jira.observium.org/browse/OBSERVIUM-154 Chris -- Chris Stone AxisInternet, Inc. www.axint.net

2 4

Backing Up Observium
by Mahomed Hussein 18 Oct '12

18 Oct '12

Hi I need to ensure our install of Observium is fully backed up and I'd rather not backup the entire VM. Could you please confirm if all I need to backup are: * /opt/observium directory * Observium database * /etc/apache2/sites-enabled/000-default What I'd like to achieve from the backups is to spin up a new VM instance, run through the install steps to get the required components installed, then restore the files so that Observium then just runs as it was at the point of the last backup. I have tried checking the FAQ and a search of the mailing list but I couldn't find any specific instructions. Any help will be greatly appreciated. Thanks in advance. Kind regards, Mahomed Hussein Custodian DataCentre email: Mahomed(a)CustodianDC.com

10 23

Port Utilization Alerts
by Adam Blackington 18 Oct '12

18 Oct '12

Observium folk, Anyway I can configure alerting based on utilization? For example, if I want to receive an email if a port hits 75% port utilization. --Adam Blackington

3 2

HIgh CPU on ASR
by Roza 17 Oct '12

17 Oct '12

After adding ASR 1002 (used as PPPOE termination) to Observium, CPU on ASR raised to 90%, and stayed that way, untill I blocked it (after 30 minutes). Normal CPU is aroiund 10%. Is this a normal? Don't think so.... ASR1002 has cca 5000 connected users. iRoza

4 4

Cisco CUCM Support
by John Macleod 13 Oct '12

13 Oct '12

Has anyone looked into fully supporting the Cisco UCM stuff? It looks like it is mainly a mix of Cisco CCM and Cisco/HP/IBM hardware mibs depending on what platform it is on. I specifically have UCM5xx series, the SMB PBX in a box - CME variant and the larger full Unified Communications Manager 5000 systems, running the linux-derived UCM apps on Cisco branded UCS, IBM or HP hardware. I did find this: http://smbitsolutions.wordpress.com/2011/05/02/2-may-2011-1341/ I do have a system I could expose for testing if someone is up for this? I have the same request for Cisco CUBE (SIP-SIP) gateway support, which looks like it is just a mib on the relevant supported hardware. I believe it is the same mib for standard SIP monitoring on other Cisco platforms, but I could be wrong. At the moment the UCM 5000 shows as a generic server, with standard net-snmp type support, and the CUBE devices just show as routers. I currently use a Cacti install alongside my Observium systems for the sole purpose of monitoring the above. Would be nice to stick to one. Thanks, John

1 0

Observium behind proxy
by Max León 10 Oct '12

10 Oct '12

Hello, I need to publish an observium instance to the DMZ. The simplest approach is by proxy using Nginx. I have the configuration set, well I think, problem is that on authentication it loops on the login, any idea why this might be? Thank you. Max Atentamente, Max León

3 3

vlan ids nor port member not updated ??
by Rachid Zarouali 08 Oct '12

08 Oct '12

Hy all, i'm using observium since 2 weeks now, i found a strange behavior. it can detect vlan defined in a switch at first, but it doesn't update them (removed or added vlans) nor update vlan port member. is there anything wrong with my observium deployment ? switch: D-Link DGS-3120 and D-Link DES-1210 any clues truely appreciated, i can't figure out what is going wrong :( Regards, Xinity

2 3

web site and svn down
by Chris Stone 06 Oct '12

06 Oct '12

Problems with web site and svn? Not able to access either from the US this morning... [root@axis-noc opt]# mtr --report --report-cycles=10 www.observium.org HOST: axis-noc.axint.net Loss% Snt Last Avg Best Wrst StDev 1.|-- ai-core.axint.net 0.0% 10 1.4 1.0 0.5 2.9 0.7 2.|-- fa0-2.na01.b009854-0.den0 0.0% 10 1.3 1.2 0.7 1.6 0.3 3.|-- vl3509.mag02.den01.atlas. 0.0% 10 2.7 23.6 0.6 81.8 36.0 4.|-- te7-4.ccr01.den01.atlas.c 0.0% 10 1.4 52.6 0.7 174.7 63.0 5.|-- te0-2-0-7.mpd21.mci01.atl 0.0% 10 13.3 13.7 12.6 16.0 1.1 6.|-- te0-2-0-5.ccr21.dfw01.atl 0.0% 10 23.8 23.5 22.6 24.9 0.7 7.|-- te2-1.ccr01.dfw03.atlas.c 20.0% 10 23.5 86.3 23.5 178.2 62.5 8.|-- teleglobe.dfw03.atlas.cog 0.0% 10 24.4 23.7 22.5 25.2 1.1 9.|-- dal-2-6k.tx.us 0.0% 10 23.5 26.1 23.2 34.0 3.7 10.|-- dal-1-6k.tx.us 0.0% 10 23.5 23.8 23.4 24.2 0.3 11.|-- nwk-1-6k.nj.us 30.0% 10 98.8 61.2 53.7 98.8 16.7 12.|-- ??? 100.0 10 0.0 0.0 0.0 0.0 0.0 13.|-- rbx-g1-a9.fr.eu 0.0% 10 127.6 136.8 127.4 211.8 26.4 14.|-- vss-5a-6k.fr.eu 0.0% 10 127.6 139.8 127.6 201.4 25.8 | `|-- 178.33.100.30 15.|-- ??? 100.0 10 0.0 0.0 0.0 0.0 0.0 -- Chris Stone AxisInternet, Inc. www.axint.net

6 6

Watchguard Support
by John Macleod 05 Oct '12

05 Oct '12

I see that there is a some type of discovery entries for the "firebox" however there is no firebox include file. I have two Watchguard Firebox XTM810 devices that I would like to monitor. Am I missing something, or is there a reason they are not present? Thanks, John

1 0

Re: [Observium] SSD for better performance
by Adam Armstrong 05 Oct '12

05 Oct '12

Its the android mail client. It has no config options. Might switch to something else. Adam. Tom Laermans <tom.laermans(a)powersource.cx> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 6

custom graph questions, almost done
by Mark Chaney 05 Oct '12

05 Oct '12

So I am not sure if this belongs on the dev list as I am not really doing core dev work and I am not currently subscribed to it. I will definitely contribute my work back to you guys though (if you wanted it). Its for graphing md3000i performance data (stupid thing isnt accessible through snmp, so its basically data attached to the management host). Anyway, I have been following the following example: http://www.observium.org/wiki/Developing/NewGraph and I am not sure about few things. 1) What are the following values for? Specifically the Pages/pages part. I understand that it cycles through the stats that i have setup, but I am not sure about the words Pages/pages. foreach ($stats as $stat) { $i++; $rrd_list[$i]['filename'] = $rrd_filename; $rrd_list[$i]['descr'] = "Pages " . ucfirst($stat); $rrd_list[$i]['ds'] = "pages" . ucfirst($stat); } 2) Now that I have the agent script created and the rest of the scripts in the tutorial, how am I supposed to activate it for a host? I am assuming it should probably be "activated" within the applications list? If so, I am guessing there is logic missing in that example tutorial on how to add it to the list of application options? 3) Is creating a diff and reapplying after every upgrade really the recommended method? Its to bad all the definitions are in a single file or else that might be a little easier to manage. 4) Any idea what type of logic i should be using to figuring out the proper numbers for the rrd graph settigns in this code section? rrdtool_create($rrd_filename, "--step 300 \ DS:pagesShared:GAUGE:600:0:125000000000 \ DS:pagesSharing:GAUGE:600:0:125000000000 \ DS:pagesUnshared:GAUGE:600:0:125000000000 ".$config['rrd_rra']); 5) What format should the agent script output be in? I am guessing it should be one per line? Right now my output is like so: <<md3000i>> total_io=3158.0 read_percentage=27.9 cache_hit_percentage=93.2 current_kbps=22475.2 current_iops=631.6 6) Last question: Is there any way to have certain agent scripts to be polled at slower intervals? This check takes about 5 seconds and is probably a resource hog on the management host since the script has to run a stupid java cli app. The management server in this case is the same host as the observium system, so I wouldnt have a problem not using the agent and just doing a cron if that was somehow an option. Thanks for you help. I know I had a lot of detailed questions. I sincerely appreciate the help. -Mark (MACScr)

1 0

unix-agent scripts conflicting with check_mk
by Mark Chaney 02 Oct '12

02 Oct '12

I cant seem to use any of the unix-agent scripts with check_mk as it ruins all the check_mk local script results. Basically any existing scripts start giving an error in the check_mk gui and state "Check output not found in local checks". If I reinventory the host, none of the scripts show up at all. As soon as i remove the observium local agent scripts from the check_mk local folder and I reinvetory the host, everything is fine again. I am unfortunately not sure what our options are though. The only thing I can think of is to somehow serialize the data so that it shows up on one line for each script, then is parsed back out by observium once it receives it. That way we easily ignore them within our main.mk files. Can't really do that now because of how there are so many lines for each result (apache/mysql for example). Thoughts? Im quite surprised this hasn't already been an issue. I am running check_mk 1.2.0p3 and observium 0.12.9.3385. - MACscr

1 0

Re: [Observium] Links not working
by Will McDermott 29 Sep '12

29 Sep '12

Awesome, that works. Thank you! Just for historical reasons: I changed Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all to Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all --Will >>> Tom Laermans 09/28/12 5:20 PM >>> Hi, You don't have allowoverride set up [as detailed in the install guide, but probably in a part that you didn't need due to no vhost], so .htaccess doesn't take effect, ergo no rewrite rules even though the module is loaded. Tom On 29/09/2012 1:29, Will McDermott wrote: > Thank you for your quick response! > > I double checked mod_rewrite and it looks like it's running: > > root@mon:/etc/apache2/mods-available# a2enmod rewrite > Module rewrite already enabled > > Also I have ovservium running in the root. I do not have a domain name associated with the server, Is that a problem? > > --Will > > >>>> Mark Chaney 09/28/12 4:16 PM >>> > You probably dont have mod_rewrite enabled. Also note that observium > has to run within the root directory of a domain or subdomain. > > On 2012-09-28 18:06, Will McDermott wrote: >> Hello, >> >> I just installed Observium from SVN on Ubuntu Ubuntu 10.04.4 LTS. I >> fallowed the Ubuntu installation guide. Observium comes up but when I >> log in. But when I click any of the links at the top they say "Not >> found" and give a invalid URL. For example when I click Devices> Add >> Devices it sends me to server.com/addhost/ which doesn't exist, >> because in the addhost directory is in a subdirectory called "pages." >> Did I miss something during the install? I have tried it a couple >> times, and reinstalled the server. >> >> Thanks! >> >> --Will >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Links not working
by Will McDermott 29 Sep '12

29 Sep '12

Thank you for your quick response! I double checked mod_rewrite and it looks like it's running: root@mon:/etc/apache2/mods-available# a2enmod rewrite Module rewrite already enabled Also I have ovservium running in the root. I do not have a domain name associated with the server, Is that a problem? --Will >>> Mark Chaney 09/28/12 4:16 PM >>> You probably dont have mod_rewrite enabled. Also note that observium has to run within the root directory of a domain or subdomain. On 2012-09-28 18:06, Will McDermott wrote: > Hello, > > I just installed Observium from SVN on Ubuntu Ubuntu 10.04.4 LTS. I > fallowed the Ubuntu installation guide. Observium comes up but when I > log in. But when I click any of the links at the top they say "Not > found" and give a invalid URL. For example when I click Devices> Add > Devices it sends me to server.com/addhost/ which doesn't exist, > because in the addhost directory is in a subdirectory called "pages." > Did I miss something during the install? I have tried it a couple > times, and reinstalled the server. > > Thanks! > > --Will > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Links not working
by Will McDermott 29 Sep '12

29 Sep '12

Hello, I just installed Observium from SVN on Ubuntu Ubuntu 10.04.4 LTS. I fallowed the Ubuntu installation guide. Observium comes up but when I log in. But when I click any of the links at the top they say "Not found" and give a invalid URL. For example when I click Devices> Add Devices it sends me to server.com/addhost/ which doesn't exist, because in the addhost directory is in a subdirectory called "pages." Did I miss something during the install? I have tried it a couple times, and reinstalled the server. Thanks! --Will

2 1

Re: [Observium] How to add linux server?
by Adam Armstrong 26 Sep '12

26 Sep '12

Documentation or features, its a simple choice. Andrey Lebedev <alg(a)condensa.ru> wrote: >On 2012-09-25 23:41:31 +0100, Tom Laermans said: > >> On 26/09/2012 0:38, Andrey Lebedev wrote: >>> >>> Tell us how you found it? >>> >>> http://www.observium.org/wiki/Documentation - nothing >>> http://www.observium.org/wiki/Main_Page - link to Professional Services >>> http://www.observium.org/wiki/Main_Page -> search -> word "Services" >>> -> appropriate page >>> >>> But. Thanks! >>> I'm find it. >> The last one, indeed. It's not linked anywhere because it's deprecated, >> unsupported and buggy. >> >> Tom >Annoying. But I think I can cope without this feature. >Once again I want to say - this is a good product, but it is not very >good documentation. >However - it's "as is". >Thank all for your help. And clarifications. > >Andrey > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 4

Re: [Observium] How to add linux server?
by Adam Armstrong 26 Sep '12

26 Sep '12

Services are deprecated. The code is still there because it would take time to remove. Do not use it. We have plans to implement better alerting in the future, but there is always a shortage of time. Adam. Andrey Lebedev <alg(a)condensa.ru> wrote: >On 2012-09-25 23:05:51 +0100, John Broome said: > >> I prefer my car, but that doesn't mean I'm going to use it to open a >> can of beans. I use the tool that's designed to do what I want, >> reliably. And if the creators of the software say it's not meant to >> be used for service monitoring I'm going to take their word for it. > >Hmm ... interesting that the author wanted to say a demo of their >product. Maybe this is a joke? >http://demo.observium.org/device/device=34/tab=services/ >http://demo.observium.org/device/device=7/tab=services/ >http://demo.observium.org/device/device=6/tab=services/ >http://demo.observium.org/ >kermit >Service Down >ssh > >It's no "service monitoring"? >Ok. :) > > > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] How to add linux server?
by Adam Armstrong 26 Sep '12

26 Sep '12

I think you misunderstand Occam's razor. We do not do up/down monitoring, no more than cacti or Mrtg do. Adam. Andrey Lebedev <alg(a)condensa.ru> wrote: >On 2012-09-25 21:45:12 +0100, Paul Cupis said: > >> "Observium is not intended to replace an up/down alerting system, but >> rather to complement it with an easy to manage, intuitive representation >> of historical and current performance statistics, configuration >> visualisation and syslog capture." > >Do not see any logic. >http://en.wikipedia.org/wiki/Occam's_razor >IMHO. > >But observium is preferd for me (over nagios or zabbix). > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

How to add linux server?
by Andrey Lebedev 26 Sep '12

26 Sep '12

Hi all, Sorry. 1) Offtopic. I unfortunately do not get your answers via mail. And look at them through http://postman.memetic.org/pipermail/observium/2012-September/thread.html How do I reply to this thread - but do not start a new topic every time? I have long lost touch (and forgotten) how to use mailing lists - last it was 10 years ago. 2) For monitoring unix servers use snmp? I do not understand a bit - but then why in wiki talk about the unix- agent. I saw that to unix-agent in any way no related to snmp. In my look this product have a lot of undocumented features that are unclear how they work. Regards, Andrey

4 13

How to add linux server?
by Andrey Lebedev 24 Sep '12

24 Sep '12

Hi all! Sorry for the newbie question. I just Installed Observium. Connected to many snmpv3 network devices - Cisco, Extreme, Juniper ... I'm fine. I'm happy with everything. Now I want to connect my first Linux server. But I find no documentation - how? I installed check_mk_agent on linux. root@monitoring:/opt/observium# telnet x.x.x.60 6556 | head Trying x.x.x.60... Connected to x.x.x.60. Escape character is '^]'. <<<check_mk>>> Version: 1.2.0p2 AgentOS: linux PluginsDirectory: /usr/lib/check_mk_agent/plugins LocalDirectory: /usr/lib/check_mk_agent/local AgentDirectory: /etc/check_mk OnlyFrom: 127.0.0.1 x.x.x.61 I do not know what to do next? Thank you for your help. Regards, Andrey

3 2

How to add linux server?
by Andrey Lebedev 24 Sep '12

24 Sep '12

+screenshot Only snmp devices: http://s11.postimage.org/6izs930cj/Picture_478.png

1 0

How to add linux server?
by Andrey Lebedev 24 Sep '12

24 Sep '12

Hello Paul , Thanks for the help, but I do not understand what you are saying (about web-interface). I do not have anything on the screen. I send the link to screenshot. http://s12.postimage.org/oddm5vdbx/Picture_477.png root@monitoring:/opt/observium# cat config.php | tail -f $config['poller_modules']['unix-agent'] = 1; ?> root@monitoring:/opt/observium# /etc/init.d/apache2 restart * Restarting web server apache2 ... waiting ...done.

1 0

Re: [Observium] SSD for better performance
by Adam Armstrong 19 Sep '12

19 Sep '12

The maths and specs suggest a modern SSD should survive observium workload for quite a while, but I'm still worried about the random failure rate and the likelyhood that individual cells get worn out. In general SSDs are such a strange tech, there's almost no way to really improve them except with fancy controller hacks, the flash itself is a dead end tech. Good luck :-) Adam Cushard Michael <mcc(a)us.axway.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

Re: [Observium] SSD for better performance
by Adam Armstrong 19 Sep '12

19 Sep '12

I would recommend dumping the data to a real disk occasionally, as observium/rrd-style workloads are pretty hard on flash-based storage. I have SSDs in my workstations, but I'm not sure if I'd trust them in a server quite yet. Please report back if/when it breaks :-) Adam. Cushard Michael <mcc(a)us.axway.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

Re: [Observium] port ignore partly fails on large number of ports
by Adam Armstrong 19 Sep '12

19 Sep '12

Haha. Glad it works :-) We should add that to the docs somewhere! Adam. Maarten De Wispelaere <maarten.dewispelaere(a)intec.ugent.be> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 3

port ignore partly fails on large number of ports
by Maarten De Wispelaere 19 Sep '12

19 Sep '12

Hi, I recently discovered the following : When trying to set "Ignore" status on switches with large number of ports (eg. force10 e1200 or c300 chassis), the setting doesn't get saved for some of the ports. More specific, at the end of the list. This is what I did : Toggle all -> removed the toggle from the mgmt interface -> then save What happens: Most ports get "ignored" status, part of them don't After getting the status, they again have a 'not-ignored-status' (checkbox not checked). If I check them again & press save -> same issue. Seems like the checkboxes only get processed to a certain number of items ? Does this sound familiar ? Thanks in advance, Maarten De Wispelaere Department of Information Technology Internet Based Communication Networks and Services (IBCN) Ghent University - IBBT Gaston Crommenlaan 8 Bus 201, B-9050 Gent, Belgium E-mail: maarten.dewispelaere(a)intec.UGent.be Tel. +32 (0)9 33 14979 Fax +32 (0)9 33 14899

5 5

Accurate Graphs in Billing are probably not so accurate
by Matthias Cramer 19 Sep '12

19 Sep '12

Hi I've noticed two things in the "Accurate" graphs in the Billing part: 1. Are Interface counter overflows or equipment reboot) probably not catched? - I see very high spikes (200 Gbps and more) on a 1G interface sometimes in sometimes out, but not at the same time. the quick graphs are ok 2. If I monitore more tha one interface for billing (Unfotunately one of the is down) the accurate graps are at leaset 1000 times to high... Atached some graphs... I runn lates svn (0.12.9.3378). Any ideas ? Regards Matthias -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zürich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250

2 1

Eaton Powerware UPS
by Aaron Maurer 17 Sep '12

17 Sep '12

Hi all, First time poster here. We use observium here at our office and think it is a great program. We were interested in having observium read SNMP information from our Powerware 9130 UPS's. Currently observium can't identify them. We were wondering if there was any interest in the community to write a snmp module to read from the Powerwares. The documentation for the SNMP values is posted in the PDF files which I can provide. If there is positive interest for anyone on helping take this on I can also provide SNMP walks of my Eatons. Here is a snippet of the first few lines of SNMP information: SNMPv2-MIB::sysDescr.0 = STRING: Powerware 9130 3000 SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.705.1 DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (2144221738) 248 days, 4:10:17.38 Thank you, Aaron Maurer Diversified Business Systems Inc. Office: 440-942-6961 Fax: 440-942-5819 amaurer(a)dbsinet.com http://www.dbsinet.com

1 0

Re: [Observium] Checkpoint Firewall Support?
by Steve Costaras 04 Sep '12

04 Sep '12

Doing some more digging here, it appears UCD-SNMP-MIB values for ssCpuUser (system & idle) are being populated correctly from checkpoint utm/splat deployments. But other items like interrupts, etc are working. The cpu values appear to be stored in the checkpoint enterprise mib: -- CHECKPOINT-MIB::multiProcIndex.1.0 = INTEGER: 1 CHECKPOINT-MIB::multiProcIndex.2.0 = INTEGER: 2 CHECKPOINT-MIB::multiProcUserTime.1.0 = INTEGER: 0 CHECKPOINT-MIB::multiProcUserTime.2.0 = INTEGER: 1 CHECKPOINT-MIB::multiProcSystemTime.1.0 = INTEGER: 100 CHECKPOINT-MIB::multiProcSystemTime.2.0 = INTEGER: 2 CHECKPOINT-MIB::multiProcIdleTime.1.0 = INTEGER: 0 CHECKPOINT-MIB::multiProcIdleTime.2.0 = INTEGER: 97 CHECKPOINT-MIB::multiProcUsage.1.0 = INTEGER: 100 CHECKPOINT-MIB::multiProcUsage.2.0 = INTEGER: 3 -- Found the current version of the mib as well as a checkpoint 32x32 graphic that can be added to the project (attached) in case someone has more time to play with it than I do. I'm still trying to wrap my head around the coding here to update this for first, base OS (per-cpu) utilization, then expand on it to something similar to the ASA firewall tab. Also it appears that the vendor has an issue with the netsnmp package supplied with the default media 5.0.9) but they do have an update package (5.3.1). This at least provides for cpu enumeration but still no stats (per above).

2 1

Re: [Observium] Strange graph
by Adam Armstrong 04 Sep '12

04 Sep '12

This is probably because the device frequently returns invalid data. A common problem with tacked systems like the 3750 and VSS. Adam. Nicolas COULIN <nicolas.coulin(a)kleegroup.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Strange graph
by Nicolas COULIN 04 Sep '12

04 Sep '12

Hi, Graphs for my stack was not correct. I have 4 swtich in stack. And observium return values very strange. 500Go by interface.... :/ Cisco IOS Software, C3750 Software (C3750-IPBASEK9-M), Version 15.0(2)SE, I have the last svn update on centos 6.2 I test to delete the host, delete rrd directory, and add my host. But the problem come back. I don't understand why. Thanks [Logo Kleegroup] Klee Group is a great place to work - Il fait bon travailler ? Klee Group

1 0

No more graphs after upgrade
by Max Leon 03 Sep '12

03 Sep '12

Hello, I have a problem I had revision 3049, due to a small problem displaying the heath status of the drives I updated to HEAD and immediatly run ./discovery.php -h new. All functionality seems to be there but I have no new graphs, any ideas on how to troubleshoot/fix this problem? Thank you. Max Leon

2 2

Re: [Observium] [Patch] Collectd v5 Apache fix
by Adam Armstrong 03 Sep '12

03 Sep '12

Please to be not distributing broken patches. Adam. Chris Bennett <chris(a)ceegeebee.com> wrote: >Hi Tom, > >> I presume this breaks users who still use collectd <5? > >Yep, treat the email & bug submission as a report of the problem and >ignore the patch, to fix this properly. I'm just putting it out into >the public so others might find this when they are troubleshooting the >same problem :) > >Regards, > >Chris >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

[Patch] Collectd v5 Apache fix
by Chris Bennett 03 Sep '12

03 Sep '12

Hi there, I noticed collectd graphing of Apache graphs is broken after Collectd released version 5 of their software. The data source name has changed from 'value' to 'count'. See attached patch. I've also filed a bug report with the patch: http://jira.observium.org/browse/OBSERVIUM-122 Regards, Chris

2 2

Observirum Graphs ere empty
by Nicolas COULIN 27 Aug '12

27 Aug '12

Hi, I have install Observium since few days, and all my graphs are empty. Rrd files are present on folder. I don't understand why. I use centos 6.2. Thanks. [Logo Kleegroup] Klee Group is a great place to work - Il fait bon travailler ? Klee Group

5 7

Re: [Observium] Observirum Graphs ere empty
by Adam Armstrong 27 Aug '12

27 Aug '12

Tom Laermans <tom.laermans(a)powersource.cx> wrote: >Hi, > >You probably didn't do it right. > >Unfortunately, "my graphs are empty" doesn't gives us a lot of >information. > >Tom > >On Mon, 2012-08-27 at 09:57 +0000, Nicolas COULIN wrote: >> Hi, >> >> >> >> I have install Observium since few days, and all my graphs are empty. >> >> >> >> Rrd files are present on folder. >> >> >> >> I don’t understand why. >> >> I use centos 6.2. >> >> >> >> Thanks. >> >> >> >> Logo Kleegroup >> Klee Group is a great place to work – Il fait bon travailler à Klee >> Group >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

openBSD
by Miguel Alejandro González 26 Aug '12

26 Aug '12

Hello Can I monitor a machine with OpenBSD with Observium??? Regards!

2 1

Help with vmware
by Pavel Ondřej 22 Aug '12

22 Aug '12

Hello, Can you help me please? How can I connect observium to ESXI5 Thank you for greet program. Pavel

1 0

Re: [Observium] Checkpoint Firewall Support?
by Steve Costaras 16 Aug '12

16 Aug '12

I do have some older nokia systems (IP380's, IP530's, and I think an IP740) laying around somewhere, but most of the new systems are using Secure Platform (R65, R70, R71, R75) versions and/or UTM's (basically the same thing, they all RedHat Enterprise v5.4 9(2.6.18 kernel) slimmed down with an extra checkpoint mib tree for items outside the base OS). We also have some provider-1 deployments (management station) but that I would consider future if anything. If you know enough about handling the observium code itself I can try helping on the checkpoint side. I have some systems here to test against as well. Steve >-----Original Message----- >From: Rob J. Epping [mailto:rob.epping@gmail.com] >Sent: Thursday, August 16, 2012 04:17 AM >To: stevecs(a)chaven.com, 'Observium Network Observation System' >Subject: Re: [Observium] Checkpoint Firewall Support? > >Hi, > >On Mon, Aug 13, 2012 at 11:14 PM, Steve Costaras <stevecs(a)chaven.com> wrote: >> >> I'm just starting to look at observium for some monitoring. I see that it supports cisco based firewalls (ASA/PIX) but it does not currently support checkpoint. >> >> Checkpoint mainly runs on top of redhat linux. I'm able to get the general linux stats but not the firewall specific stats (connections/vpn/etc) similar to what's available with the cisco asa support. >> >> Basically, I'm asking if anyone has managed to get this to work. Or barring that, any information as to how to add support? > >I have some patches to submit. But these are for Nokia IP-platform with IPSO. > >Anything particular that interests you? >-- >GRTNX, >RobJE >

1 0

solaris 10 / net-snmp not getting cpu stats
by Steve Costaras 16 Aug '12

16 Aug '12

Still testing with various devices here, found an interesting issue. I have a M3000 sun box with solaris 10 on it, which gets added fine and most of the graphs appear to be eyeball correct, however am NOT stats for cpu utilization. The sun box is using net-snmp (included w/ solaris 10)(not the older sun snmpd daemon) which was the default with older systems. doing a manual walk I DO get stats: $ snmpwalk -v2c -c XXXX XXXXX 1.3.6.1.4.1.2021.11 iso.3.6.1.4.1.2021.11.1.0 = INTEGER: 1 iso.3.6.1.4.1.2021.11.2.0 = STRING: "systemStats" iso.3.6.1.4.1.2021.11.3.0 = INTEGER: 0 iso.3.6.1.4.1.2021.11.4.0 = INTEGER: 0 iso.3.6.1.4.1.2021.11.5.0 = INTEGER: 0 iso.3.6.1.4.1.2021.11.6.0 = INTEGER: 0 iso.3.6.1.4.1.2021.11.7.0 = INTEGER: 507 iso.3.6.1.4.1.2021.11.8.0 = INTEGER: 259 iso.3.6.1.4.1.2021.11.9.0 = INTEGER: 1 iso.3.6.1.4.1.2021.11.10.0 = INTEGER: 0 iso.3.6.1.4.1.2021.11.11.0 = INTEGER: 99 iso.3.6.1.4.1.2021.11.50.0 = Counter32: 1190528 iso.3.6.1.4.1.2021.11.52.0 = Counter32: 330481 iso.3.6.1.4.1.2021.11.53.0 = Counter32: 136097671 iso.3.6.1.4.1.2021.11.54.0 = Counter32: 0 iso.3.6.1.4.1.2021.11.55.0 = Counter32: 330481 iso.3.6.1.4.1.2021.11.57.0 = Counter32: 0 iso.3.6.1.4.1.2021.11.58.0 = Counter32: 0 iso.3.6.1.4.1.2021.11.59.0 = Counter32: 898868894 iso.3.6.1.4.1.2021.11.60.0 = Counter32: 736460424 so it is showing ticks. but I don't see that mib tree being referenced by doing a poller debug at all? is the solaris support only for perhaps the old snmp (solaris) version which has the entries in a different tree?

1 0

Re: [Observium] Switchmap integration
by Adam Armstrong 15 Aug '12

15 Aug '12

:-D Nikolay Shopik <shopik(a)inblock.ru> wrote: >Adam, just use two words - world domination > >On 15.08.2012 21:37, Adam Armstrong wrote: >> Almost everything that switchmap and netdisco does is on our long-term >> wish list, it's just a matter of finding time and resources to develop >> it all. >> >> We also would prefer to use our own code to generate the configs and >> "smokeping" stats too, as integration is a little one way and suboptimal >> to configure. >> >> adam. >> >> >> On 15/08/2012 17:59, Cushard Michael wrote: >>> Hi, >>> >>> Netdisco does have move features and is an all-around more complete >>> solution, but for me personally it was overkill. Switchmap is just a >>> few simple scripts you schedule and it pulls all the data into csv >>> files, then creates simple html files based on the csv data and has a >>> script for seaching through all the generated pages. It's pretty fast >>> as well. I can do roughly 10000 ports in under 30 minutes with it over >>> some pretty terrible WAN links. I currently have a Switchmap link in >>> our Observium installation as a custom menu item, but tighter >>> integration (of something) would obviously be better. >>> >>> Regards, >>> >>> Michael >>> -----Original Message----- >>> From: observium-bounces(a)observium.org >>> [mailto:observium-bounces@observium.org] On Behalf Of Michael Robbert >>> Sent: Wednesday, August 15, 2012 8:35 AM >>> To: observium(a)observium.org >>> Subject: Re: [Observium] Switchmap integration >>> >> Michael, >> How does Switchmap compare to Netdisco and/or SNMPInfo (The set of >> libraries that Netdisco uses)? Netdisco stores its data in a database >> that could be queried. We use Netdisco and I might be convinced to >> take a look at this kind of integration. I am not a core developer for >> either project so I can't say anything about its acceptance in the >> code base. I do think that it would have to be a plug-in of some type >> not a core feature. Both Swiitchmap and Netdisco are mostly Perl while >> Observium is mostly PHP. I see them as being separate projects, but >> Observium could have a configuration telling it to look at another >> database for more info to display. >> As a side note I'm surprised that I've never heard of Switchmap >> before. We work often with the Network engineers at NCAR/UCAR that >> wrote it. They manage the consortium that is our connection to the >> internet. >> >> Mike Robbert >> >> >> On 8/14/12 9:39 PM, Cushard Michael wrote: >>>>> Hi, >>>>> >>>>> Switchmap (http://sourceforge.net/projects/switchmap) is a most >>>>> excellent little utility written in perl. It goes out to all your >>>>> configured switches utilizing SNMP and pulls all the ARP and MAC >>>>> tables from them, and builds static HTML pages for each switch with >>>>> tables that list port number, speed, duplex, CDP neighbor >>>>> information, MAC address(es), IP address(es), and the fqdn(s) of >>>>> the device(s) seen on the ports at the time of polling. It also >>>>> provides a rudimentary search function that lets you search through >>>>> all the hosts to find which switch port across all your switches a >>>>> particular host was last seen on. This is very handy when you have >>>>> a large number of switches and ports and you need to go "hunting". >>>>> >>>>> >>>>> Now I may be having a UTS moment here, and if I am please correct >>>>> me, but while Observium seems to have something similar, it doesn't >>>>> appear to go to the depth that Switchmap does to actually tell you >>>>> what host(s) are actually connected to what switch ports by >>>>> utilizing the switches ARP and MAC tables. >>>>> >>>>> What would make Observium - and Switchmap - even better would be if >>>>> there was integration between the two, similar to the SmokePing or >>>>> RANCID integration. Switchmap stores all its polled data for each >>>>> switch in separate CSV files, there doesn't seem to be anything >>>>> mysterious going on as far as data storage is concerned. What would >>>>> it take to make a "Switchmap" tab in Observium under a device that >>>>> lists this data, similar to the way RANCID has a "config" tab and >>>>> SmokePing has a "Ping" tab that is integrated into Observium? >>>>> >>>>> Regards, >>>>> >>>>> Michael >>>>> >>>>> _______________________________________________ observium mailing >>>>> list observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Missing TenGigabit interfaces on Cisco WC-C4900M
by Adam Armstrong 14 Aug '12

14 Aug '12

Interfaces are polled via IF-MIB. Almost every device is identical for that. Either you switch is not exposing these interfaces in snmp or they are being filtered. Try running discovery in debug for that host. Adam. Per Jorgensen <pej(a)combox.dk> wrote: >Hi all > >First of all thank to the team of developer for making this program, and making it better and better everyday, >love the look and ease of use. > >But I have run into a problem with a Tengigabit ethernet device I newly added into my Observium v. 0.12.8.3360. >it seems that every thing get detected alright, except all the TenGigabitEthernet, interfaces dont show up >anywhere in Observium, all other interfaces on that device gets detectet allright, and I can see the >interfaces in the ports tab on the device, but not the TenGengigabit interfaces. btw: the device is a >Cisco WS-C4900M > >Is that because Cisco WS-C4900M is not a supported device , or should I do some config changes to get >TenGigabitEthernet to work ? > >if the WC-C4900M is not supported, how can I then contribute with information on the device , and help to >then this device supported ? > >Best Regards >Per Jorgensen >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1