- observium - lists.observium.org

Blank Dashboards
by Andrew Lemin 07 Jan '19

07 Jan '19

Hi. Has anyone else experienced the same issue where after the Observium upgrade (9657) the new dashboard is showing empty transit and peering traffic graphs? Before the upgrade they were showing the traffic data fine, but on the new dashboard based front page, the graphs are empty? I’ve cleared browser cache etc and waited for a while. I have also tried adding a new graph, which involves browsing to the aggregate transit graph and click add to widget etc. But that only creates a mini graph (which does show). The nice front page graphs for Transit, Peering, and Transit and Peering are just white :( [image1.jpeg] The Gap the graph below was from the upgrade maintenance as I also upgraded the distribution with apt upgrade etc. Everything else seems ok Thanks, Andy. Sent from a teeny tiny keyboard, so please excuse typos

7 11

Default Micrograph size?
by Shawn L 07 Jan '19

07 Jan '19

Pre-upgrade (to 19.1.9661) we were able to set a default micrograph size in config.php ie: $config['frontpage']['micrograph_settings']['width'] = 250; $config['frontpage']['micrograph_settings']['height'] = 100; Post upgrade, that value doesn't seem to be used anymore. Is there a way to set the default size of the micro graphs in the config? I know I can use the GUI to edit each individual graph, but I'd like to be able to just do it once and have them all the same size. Unless I'm missing something....

2 1

Map no longer centered or zoomed
by Shawn L 07 Jan '19

07 Jan '19

After taking update 19.1.9657 this weekend, the map on the dashboard still appears, but it's zoomed out to show all of South America and Africa, instead if it's previous value of being sized / zoom-ed to show just our equipment. Is there a way to change / fix this? Shawn

3 3

Version bar is hiding bottom of front page
by Thibault Richard 07 Jan '19

07 Jan '19

Hello, I've just updated to the latest stable version. Thanks ! I've just noticed a weird thing. As you can see on this screenshot, the bar displaying the version number is hiding the bottom of the front page (at the right of the screenshot, aside 70,4 Mbps, you can see the top of a graphic hidden by the version bar) I've tested with different browser Not a big deal but at you least you are now aware Best Regards Thibault

2 2

Discovery updates sensors on every run
by Niklas Larsson 07 Jan '19

07 Jan '19

Hi, replaced a Dell EqualLogic member and since then I get logs of sensor updates every time discovery is running. I can not see any changes though, snipped from attached output: > > Discover sensor: [class: temperature, device: eql.example.com, oid: > .1.3.6.1.4.1.12740.2.1.6.1.3.1.1071562282.2, index: 1.1071562282.2, > type: equallogic, descr: Backplane sensor 0, scale: 1, limits: (1, 2, > 45, 50), CURRENT: 24, , > > SQL[SELECT COUNT(`sensor_id`) FROM `sensors` > WHERE `poller_type`= 'snmp' AND `sensor_class` = > 'temperature' AND `device_id` = '38' AND `sensor_type` = 'equallogic' > AND `sensor_index` = '1.1071562282.2'] > ROWS[1] > SQL RUNTIME[0.00074983s] > > SQL[SELECT * FROM `sensors` WHERE `sensor_class` = 'temperature' AND > `device_id` = '38' AND `sensor_type` = 'equallogic' AND `sensor_index` > = '1.1071562282.2'] > ROWS[1] > SQL RUNTIME[0.00094700s] > Compare float numbers: "50" with "50", epsilon: "0.1", comparision: "0 > < 0.1", numbers: SAME > Compare float numbers: "45" with "45", epsilon: "0.1", comparision: "0 > < 0.1", numbers: SAME > Compare float numbers: "1" with "1", epsilon: "0.1", comparision: "0 < > 0.1", numbers: SAME > Compare float numbers: "2" with "2", epsilon: "0.1", comparision: "0 < > 0.1", numbers: SAME > Compare float numbers: "1" with "1", epsilon: "1.0E-5", comparision: > "0 < 1.0E-5", numbers: SAME > Compare float numbers: "0" with "0", epsilon: "1.0E-5", comparision: > "0 < 1.0E-5", numbers: SAME > > SQL[SELECT `attrib_value` FROM `entity_attribs` WHERE `entity_type` = > 'sensor' AND `entity_id` = '5230' AND `attrib_type` = 'sensor_addition'] > ROWS[0] > SQL RUNTIME[0.00034690s] > > SQL[UPDATE `sensors` set `sensor_mib` ='',`sensor_object` ='' WHERE > `sensor_id` = '5230'] > ROWS[0] > SQL RUNTIME[0.00050497s] > U > SQL[INSERT INTO `eventlog` > (`device_id`,`entity_id`,`entity_type`,`timestamp`,`severity`,`message`) > VALUES ('38','5230','sensor',NOW(),'6','Sensor updated: temperature > equallogic 1.1071562282.2 Backplane sensor 0')] > ROWS[1] > SQL RUNTIME[0.00040412s] What can I do? /niklas

3 5

Coriant G30 Monitoring
by Jay Hanke 06 Jan '19

06 Jan '19

Is anyone monitoring Coriant G30 devices in Observium?

2 3

19.1.9654 Front page map
by Luca Sasdelli 04 Jan '19

04 Jan '19

Hi all, does it exist any way to set a map area to be shown? Here I see a twice planisphere, while our targeted devices just cover the Europe only. Thanks and greets. Luca

1 0

BFD Support
by Klimek, Denis 03 Jan '19

03 Jan '19

Hi all, do you have anything on your roadmap regarding BFD support? CISCO-IETF-BFD-MIB, JUNIPER-BFD-MIB, BFD-STD-MIB etc pp Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

1 0

Help
by thesa1nt＠mail.bg 03 Jan '19

03 Jan '19

Hi, I have Observium CE in my system and so far worked well. Now I added a two printers - Brother MFC-L8690CDW and Brother MFC-L9570CDW. But in "Printer Supplies" observium showed "Unknown" for Toner Cartbridge. After update to the newest version now show "Some Space" ( 1% ) and it isn't correct. Can you help me, please ? ------------------------------------- П.П. Искаш бизнесът ти да е и онлайн? Лесно е! Направи си сайт. В СуперХостинг.БГ пазят място за него! Виж повече на www.superhosting.bg. https://www.superhosting.bg/?utm_source=mail.bg&utm_medium=cpm&utm_content=…

2 1

Best procedure to delete device without losing graphs
by Klimek, Denis 03 Jan '19

03 Jan '19

Hi, is there any best procedure known to keep graphs data for a "Aggregated Graph" build with filters? (Port groups) Example: We have a Port Group called "Transit" which includes all ports labeled as Transit upstreams. Now we replaced the whole router which had a transit upstream. The new router does have it aswell. Now we want to keep the existing data for the Port Group Graph for historical reason, but we also want to delete the device in the database to keep Observium database clean. Currently we also have duplicate IP addresses for the configured IP addresses... on the old device and on the new one. I think if we delete the device we will lose the port label information which is important to build the port groups with the filters. Can someone advise something? Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

3 3

Buildings in Front Page Map
by Philippe Laurent 02 Jan '19

02 Jan '19

What is the recommended method of showing buildings (provided by OpenStreetMap) in the front page map of the Observium interface?

2 5

Starline Busway Monitoring
by David Ross 02 Jan '19

02 Jan '19

Hello! I sent this question yesterday but got no response. Please reply as soon as possible. I've added monitoring to our Starline Busway CPMs (Critical Power Meters) and have added latest MIB to the Observium SNMP MIBs directory. However, I get very little to no monitoring data. Is the Starline MIB not supported by Observium? Please advise; thanks! Regards, *David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross(a)salesforce.com <http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html>

3 5

UBNT Gpon port Ufiber
by chott＠praha1.net 02 Jan '19

02 Jan '19

Hello team, There is new MIB for support UFiber OLT GPon ports, MIB from UBNT side https://drive.google.com/file/d/1F1BYUiLZF_ciGsZIgyMrsGkJTI_royg_/view Can you check version and update in Observium? Now UFiber show only "lo" "eth0" and "br0" Thank you Tom

1 1

help on Active directory authentication (nothing happens)
by Vincent Kwiatkowski 02 Jan '19

02 Jan '19

Hi All, I tried to make observium AD log in working during a few hours without any success, so I ask here for help^^ I took the ad example conf and edited some values. I used same kind of conf in antoher apache vhost, and it works fine. I also tried to find a good debug mode to help me with that, but nothing Is in the logs. I tried "url/debug", "url/debug=yes", I can only see "CACHE DISABLED. Disabled in config", but I don't see any message about failed authentication (after I entered my credentials, nothing happens, I come back to log in page) I also tried what is in this page ( https://docs.observium.org/config_options/#debugging-profiling-settings), but nothing happens in any log file. how can I enabled debug mode to help me with this authentication issue? In my win2k8 AD, the directory tree is as follow: Administrative (at the root) --> "Domain users" (where all the "human" users are) --> "Groups" (where all the groups are) --> "ServiceAccounts" (where the binddn user is) Here is the conf I have : $config['auth_mechanism'] = "ldap"; $config['auth_ldap_binddn'] = "cn=DNrequest,ou=ServiceAccounts,ou=Administrative,dc=example,dc=com"; $config['auth_ldap_bindpw'] = "password"; $config['auth_ldap_attr']['uid'] = "sAMAccountName"; $config['auth_ldap_attr']['uidNumber'] = "objectSid"; $config['auth_ldap_attr']['cn'] = "name"; $config['auth_ldap_attr']['dn'] = "distinguishedname"; $config['auth_ldap_objectclass'] = "person"; $config['auth_ldap_version'] = 3; $config['auth_ldap_server'] = "example.com"; $config['auth_ldap_port'] = 389; $config['auth_ldap_starttls'] = FALSE; $config['auth_ldap_prefix'] = "CN="; $config['auth_ldap_suffix'] = ",OU=Domain users,OU=Administrative,DC=example,DC=com"; $config['auth_ldap_group'] = array("CN=NE.Access,OU=Groups,OU=Administrative,DC=example,DC=com"); $config['auth_ldap_groupbase'] = "OU=Groups,OU=Administrative,DC=example,DC=com"; $config['auth_ldap_groupmembertype'] = "fulldn"; $config['auth_ldap_groupmemberattr'] = "member"; unset($config['auth_ldap_groups']); $config['auth_ldap_groups']['CN=NE.Access,OU=Groups,OU=Administrative,DC=example,DC=com']['level'] = 10; Thanks a lot in advance for you help! Vincent Kwiatkowski Operations&Infrastructure - System Team • Itiviti Production System Engineer Direct: +33 1 44 50 25 45 vincent.kwiatkowski(a)itiviti.com 21 Boulevard Haussmann <https://maps.google.com/?q=21+Boulevard+Haussmann+75009+Paris,+France&entry…> 75009 Paris, France <https://maps.google.com/?q=21+Boulevard+Haussmann+75009+Paris,+France&entry…> Phone: +33 1 49 95 30 00 -- Visit: itiviti.com <https://www.itiviti.com/> / ullink.com <https://www.ullink.com/> » Read the latest news from Itiviti » <http://www.itiviti.com/news/> *The information contained in or attached to this email is strictly confidential. If you are not the intended recipient, please notify us immediately by telephone and return the message to us.* * * *Email communications by definition contain personal information. The ITIVITI group of companies (of which ULLINK forms part) is subject to European data protection regulations. ULLINK’s Privacy Policy is available at www.ullink.com <http://www.ullink.com/>. ULLINK expects the recipient of this email to be compliant with ULLINK’s Privacy Policy and applicable regulations. Please advise us immediately at dataprotection(a)ullink.com <mailto:dataprotection@ullink.com> if you are not compliant with these.*

3 3

Eaton Network Card-MS on Observium Pro
by Tommy Nevtelen 01 Jan '19

01 Jan '19

Having an an issue with observium pro showing less stuff and stuff looking broken after updating the firmware a couple of versions on Eaton Network Card-MS. The interface names look wrong and seeing stuff such as: Output Source Status deleted: xupsOutputSource xupsOutputSource.3.3 Output Source Battery Status Status deleted: xupsBatteryAbmStatus xupsBatteryAbmStatus.3.3 Battery Status Inverter Off Status Alert: ups1.lndo.kambi.com Inverter Off entered ALERT state: No (previous: Yes) According to the changelog there has been a mib change but I'm not sure when that happened. Changelog of the firmware: http://pqlit.eaton.com/ll_download_bylitcode.asp?doc_id=34077 All firmwares http://powerquality.eaton.com/Support/Software-Drivers/Downloads/connectivi… /T **

5 13

Happy New Year and goodbye PHP5!
by Markus Klock 01 Jan '19

01 Jan '19

This is a happy day guys! PHP5 is no longer supported and no security fixes will be made for it any longer. If you have not already thrown it out, now its the time to get on the PHP7-train! (but not PHP7.0 which also is end of support) [image: image.png]

1 0

Re: [Observium] portpercent colors
by Thibault Richard 26 Dec '18

26 Dec '18

Hello, No info about this ? Best Regards Thibault De : Thibault Richard <thibs(a)thibs.com> Envoyé : jeudi 20 décembre 2018 16:43 À : 'Observium' <observium(a)observium.org> Objet : portpercent colors Hello, Im using the (really cool) feature offered by the module portpercent Im using it to have a graphical view of the traffic type on my core switch stack Apparently per defaults there is only 5 different colors On this example, « Core-Firewall » got the same color as Core-ISCSI Is there a way to specify a color per element ? Best Regards Thibault

2 1

LDAP config
by Jason La 20 Dec '18

20 Dec '18

To Observium community, I'm having issue configuring LDAP on the config.php, wasn't able to get it to work. Is it possible someone can share a working config in the config.php for LDAP? Thank you so much in advance. Jason La | Lead Systems Engineer, Portware Infrastructure Portware, A FactSet Company 99 Park Ave, 16th Floor New York, NY 10016 (212) 370 8353 www.factset.com<http://www.factset.com/>

2 1

portpercent colors
by Thibault Richard 20 Dec '18

20 Dec '18

Hello, I'm using the (really cool) feature offered by the module portpercent I'm using it to have a graphical view of the traffic type on my core switch stack Apparently per defaults there is only 5 different colors On this example, < Core-Firewall > got the same color as "Core-ISCSI" Is there a way to specify a color per element ? Best Regards Thibault

1 0

Storage Aggregate Bytes Stacked problem in r9645
by Richard Wigzell 20 Dec '18

20 Dec '18

Hello, We have a number of Groups of type Storage in order to see the Aggregate Bytes Stacked graph for that set of storage, this has been working well but when creating new groups in r9645 (possible before) the graph is blank / will not display. Any suggestions on diagnosing this would be appreciated. [cid:image001.png@01D49675.964A51A0] Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

2 5

Cisco CBQoS - Alert Checks
by Reisner Martin 20 Dec '18

20 Dec '18

Good Morning! Can somebody help me out how to create a Alert Check for Cisco CBQoS Classes? I want to check if a dedicated Cisco CBQoS Class Bandwidth is exceeded. Thank you in advance! With kind regards Martin PS.: Im using Observium Professional 18.10.9472 (16th October 2018).

2 1

Quick filters highlight not working
by Johann Mallet 19 Dec '18

19 Dec '18

Hello, On my "Port" tab in a device page, my "Quick Filters" menu seems be not have highlight when you select one or more options. The menu remains "blank" after pape reload with filter(s) apply. Before : [image: image.png] After select "Hide shutdown" and page reload with filter : [image: image.png] Filter apply and we can see URL with filter parameter: https://domaine.tdld/device/device=13/tab=ports/view=basic/filters=eyJkZWxl… Only visible change : it's when you select "Hide all", menu text change for "Reset all". I use last SVN update. I have try new installation for test, it's the same result. Johann

1 0

Increase polling interval to 10 minutes?
by Gordon Cheng (gocheng) 18 Dec '18

18 Dec '18

I have a few Cisco Nexus switches with over 1k ports/interfaces. Since it takes quite some time for them to finish polling, is there any way we can increase the polling interval from default 5 minutes to say 10 minutes? Can we just increase the interval for these few devices, or we have to increase it for all? Any pointer or documents showing how it can be done? I'm a bit new to Observium. Thanks. - Gordon

4 3

Windows LLDP,LLTD,SNMP Auto-Discovery
by Connary, Scott 15 Dec '18

15 Dec '18

Hello. I am trying to get our environment to be completely auto-discovered. Our Windows 10 boxes will not auto-discover. I have read that this is just something that you have to deal with. Has anyone found a way to make this happen? Thank you.

3 2

Win2019 Server called Win 2016
by ron＠rjr-services.com 15 Dec '18

15 Dec '18

Howdy Adam, et al., So I deployed a couple of Win2019 servers yesterday and of course added them to my monitoring.... and they are being shown as Win 2016 servers. Checked the poller debug of WMI and that's correctly indicating... but I suspect Microsoft's choice to still call it NT 6.3 may be throwing things off. From module system: o sysDescr Hardware: Intel64 Family 6 Model 63 Stepping 2 AT/AT COMPATIBLE - Software: Windows Version 6.3 (Build 17763 Multiprocessor Free) From module os: o OS Poller OS o Hardware Intel x64 o Version Server 2016 (NT 6.3) o Features Multiprocessor From module wmi: WMI Poller: Windows version updated: Server 2019 Standard (10.0.17763) Intel(R) Xeon(R) CPU E5-2643 v3 @ 3.40GHz I'm not even going to try to hack code on this one. ...Ron -- This message has been scanned by E.F.A. Project and is believed to be clean.

2 4

update fail to 9643
by Laszlo Nemeth 14 Dec '18

14 Dec '18

Hello I tried to upgrade from to latest (9643) version. The svn update was fine, but the discovery.php give me this error: ./discovery.php -u PHP Parse error: syntax error, unexpected '[' in /opt/observium/includes/defaults.inc.php on line 383 What i did wrong? :) Thanks Br Laszlo

3 4

Possible pseudowire bug - Backup PSW's classed as DOWN/ALERT, results in broken PW alerting
by Andrew Lemin 14 Dec '18

14 Dec '18

Hi List, Just a quick one to check that I do not need to configure something extra for this to work? We have lots of Pseudowire's configured using IOS-XR, IOS-XE and IOS, and these all show in Observium with the pwID, and the Local and Remote details (so Observium is correctly matching the stanzas across the two endpoints as being the same service) which is awesome :) However when configuring 'Backup' Pseudowire, the standby/backup Pseudowire is shown as 'Down' and 'Alert' in Observium? This is really confusing for support staff who do not understand if down/alert means something is wrong or not, and as such we are currently unable to monitor any pseudowire and have all alerts disabled for them :( The attached image shows an example, of how all the PWs to the secondary device are reported as down and in an alert state! They are all down but in the normal state as standby/backup pseudowires. Below shows the output for the PW states, and it can be seen that a status of 'sec' and 'SB' is provided for Standby/Backup (the Pseudowire is explicitly configured with a 'Backup' path etc) pseudowires. BYF-CGW-2#show xconnect all Legend: XC ST=Xconnect State S1=Segment1 State S2=Segment2 State UP=Up DN=Down AD=Admin Down IA=Inactive SB=Standby HS=Hot Standby RV=Recovering NH=No Hardware XC ST Segment 1 S1 Segment 2 S2 ------+---------------------------------+--+---------------------------------+-- UP pri ac Po20.339:339(Eth VLAN) UP mpls <remote-rt-1-ip>:339 UP IA sec ac Po20.339:339(Eth VLAN) UP mpls <remote-rt-2-ip>:339 SB UP pri ac Po20.341:341(Eth VLAN) UP mpls <remote-rt-1-ip>:341 UP IA sec ac Po20.341:341(Eth VLAN) UP mpls <remote-rt-2-ip>:341 SB UP pri ac Po20.348:348(Eth VLAN) UP mpls <remote-rt-1-ip>:348 UP IA sec ac Po20.348:348(Eth VLAN) UP mpls <remote-rt-2-ip>:348 SB So the question I guess is, do the OIDs show the third status of 'SB' (or the 'XC' and 'ST' states of, 'IA' & 'sec' = Standby/Backup etc) so we can have something like; 'UP' = Green (Up), 'SB' = Amber (Up), 'DN' = Red (Down/Alert)? Without this pseudowire alerting and state monitoring is broken :( As always, Thanks for all your time and effort with Observium Kind regards, Andy.

4 5

Re: [Observium] nut-snmp
by Ron Marosko 13 Dec '18

13 Dec '18

3 2

Host Description in Notifications
by Brian Downey 12 Dec '18

12 Dec '18

Hi All, Has anyone else experienced trouble getting the Description field (Host Properties -> Device Settings) to appear in notifications? Looking at the notification templates there is an "ENTITY_DESCRIPTION" field, but it doesn't seem to get used in our installation; i.e. the alerts simply show "Entity" and then "Condition" skipping it entirely. The descriptions are filled in and show in the Observium interface. As a shot in the dark I tried to customize the template per the README in the template directory & experimented with "DEVICE_DESCRIPTION", but also no bueno. -Brian

1 0

syslog filters
by Arnoldo Vidal Bravo 11 Dec '18

11 Dec '18

Hi, I'm using feature syslog on observium 18.10.9472, but unable it filters for messages. $config['syslog']['filter'][] = '%%10DRV_DEM/5/FAN WARNING(t):- 1 - Info: Fan4 is ERROR now.'; i restarted rsyslog service The syslog read entries on a mysql table. somebody can helpme? -- Saluda cordialmente

2 1

nut-snmp
by Roland Hill 11 Dec '18

11 Dec '18

Hi list, Not a critical thing... Just wondered if anyone had done any config to get the nut-snmp "package" to be discovered in Observium. I'm running Observium CE 18.9.9420. I found a this on the net, https://raymondjdouglas.com/blog/2018/ups-monitoring/ which gave me hope that this would be possible. Many thanks. -- Regards, Roland

1 0

Re: [Observium] Observium not fully updating
by tech＠tempehgirl.com 09 Dec '18

09 Dec '18

? epel-release-latest-6.noarch.rpm ? svn ? remi-release-6.rpm ? observium ? trunk ? html/includes/jpgraph ? includes/discovery/functions.inc.php.orig M includes/discovery/functions.inc.php > What is the output of "svn status" ?> > adam. >> >> On 2018-12-08 16:36:06, tech--- via observium >> wrote: >> >> I'm running Observium on CentOS 6.10. The PHP version on the machine >> is currently 7.0.16. >> >> When I run the "svn update" command it completes correctly. However, >> when I run "discovery.php -u", I get the following error: >> >> PHP Parse error: syntax error, unexpected end of file in >> /opt/observium/includes/discovery/functions.inc.php on line 164 >> >> I tried with both the stable and current versions, but get the same >> results. Thank you for any help. >>

2 2

Observium not fully updating
by tech＠tempehgirl.com 08 Dec '18

08 Dec '18

I'm running Observium on CentOS 6.10. The PHP version on the machine is currently 7.0.16. When I run the "svn update" command it completes correctly. However, when I run "discovery.php -u", I get the following error: PHP Parse error: syntax error, unexpected end of file in /opt/observium/includes/discovery/functions.inc.php on line 164 I tried with both the stable and current versions, but get the same results. Thank you for any help.

2 1

Observium client for windows?
by Connary, Scott 08 Dec '18

08 Dec '18

Observiums biggest weakness is its inability to auto-discover windows. LLDT needs to be integrated into the design. Or being able to piggy back off of Symantec or bigfix for data.

1 0

SVN not updating
by Dash Brousseau 08 Dec '18

08 Dec '18

Past 2 months I cant seem to update my subscription (root@pla01netmon) - /opt/observium ->svn update Updating '.': At revision 9642. (root@pla01netmon) - /opt/observium ->svn update -r 9642 Updating '.': At revision 9642. But on web GUI It states Observium 18.10.9472 (16th October 2018) Dash This message contains information which may be confidential and privileged. Unless you are the intended addressee (or authorized to receive for the intended addressee), you may not use, copy or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by e-mail then delete the message immediately. Francais: http://www.fundserv.com/fr/company/disclaimer<http://www.fundserv.com/francais/legal/disclaimer_email_ib.shtml>

3 4

Observium doesn`t send syslog alerts via email
by Jan Horacek 07 Dec '18

07 Dec '18

Hi guys, I`m experiencing issues when I`m not receiving emails from syslog alerters. I have just a simple alerter which is matching and I`m able to see them in syslog alert log, but emails are not going. I was trying to generate test_alert and email has been delivered. Any tips and tricks? thanks Jan

2 2

wkhtmltopdf
by Eric W. Bates 07 Dec '18

07 Dec '18

I'm trying to generate a report with wkhtmltopdf. This is a command line tool which inputs a URL and outputs a PDF. How do I compose an Observium URL which includes authentication? Everything I try simply renders the "Please log in:" page. -- Clark 159a, MS 46 508/289-3112

2 2

Device status changed to Down due to SNMP timeout
by Ming Wong, CLSA 07 Dec '18

07 Dec '18

Dear Observium, I am running the professional edition of Observium. Due to snmp timeout, some devices are considered to be "down" intermittently. I have tried to tweak the snmp timeout but it still happen. My question is: can I use ping only, and ignore snmp timeout to detect device up/down ? Thanks, Ming The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

2 1

Possibility of disabling a health status
by Patrick Kambach 04 Dec '18

04 Dec '18

Dear Everybody, we have a couple of foundry switches (with only a single power supply) in use and with the "newest" version, we see an alarm under statuses. Is it possible to ignore / disable the health check for e.g. the 2nd power supply? BR, Patrick

2 2

Alert Checkers background not adjusting to Custom OID
by Pieter De Wit 04 Dec '18

04 Dec '18

Hey Guys, More a feature request (?) than anything else but I have noticed that the alert checkers background changes to match the state for "normal" OIDs but for custom OIDs it stays grey ? [image: Screen Shot 2018-12-04 at 10.04.22 AM.png] Thanks, Pieter

3 4

Stacking custom OIDs
by Pieter De Wit 03 Dec '18

03 Dec '18

Hey Guys, Is there a way to make a custom graph that shows various custom OIDs ? Thanks, Pieter

1 0

Dell Compellent DiskFolderSUTotalSpace
by Richard Wigzell 30 Nov '18

30 Nov '18

Hello all, Would it be possible to have the following two OIDs displayed for our Dell Compellent arrays. scDiskFolderSUTotalSpace<http://www.circitor.fr/Mibs/Html/C/COMPELLENT-MIB.php#scDiskFolderSUTotalSp…> 1.3.6.1.4.1.16139.2.32.1.3 Disk Folder Storage Usage total space, in GB OBJECT-TYPE Unsigned32<http://www.circitor.fr/Mibs/Html/S/SNMPv2-SMI.php#Unsigned32> scDiskFolderSUUsedSpace<http://www.circitor.fr/Mibs/Html/C/COMPELLENT-MIB.php#scDiskFolderSUUsedSpa…> 1.3.6.1.4.1.16139.2.32.1.4 Disk Folder Storage Usage used space, in GB OBJECT-TYPE Unsigned32<http://www.circitor.fr/Mibs/Html/S/SNMPv2-SMI.php#Unsigned32> Preferable together on the same graph - to let us know how much space has been used. On our arrays the sub object .2 is the only one to return a value. iso.3.6.1.4.1.16139.2.32.1.4.1 = Gauge32: 0 iso.3.6.1.4.1.16139.2.32.1.4.2 = Gauge32: 43434 iso.3.6.1.4.1.16139.2.32.1.3.1 = Gauge32: 0 iso.3.6.1.4.1.16139.2.32.1.3.2 = Gauge32: 84496 we are doing this with the custom OID function at the moment but it's a bit clunky as it returns in Gb so 82TB comes out as 82k Gb for example, and they are separate graphs. [cid:image001.png@01D488A7.3F599B20] If you need access to a device or more info please let me know as we would be happy to help. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

Support for Starline Busway CPMs
by David Ross 29 Nov '18

29 Nov '18

Hello! I've added monitoring to our Starline Busway CPMs (Critical Power Meters) and have added latest MIB to the Observium SNMP MIBs directory. However, I get very little to no monitoring data. Is the Starline MIB not supported? Please advise; thanks! Regards, *David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross(a)salesforce.com <http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html>

1 0

Poller Time
by hermes.martinez＠pueblobonito.com.mx 29 Nov '18

29 Nov '18

Hi, Does Anyone can help me to change the poller time of 5 min to 10 min, I'm not sure that is this the valor, but I tried change the number 5 to 10 but observium stops draws graphs, Does anybody can tell me how can i do this change, please? */5 * * * * root /opt/observium/poller-wrapper.py 8 >> /dev/null 2>&1 Regards! --- El software de antivirus Avast ha analizado este correo electrónico en busca de virus. https://www.avast.com/antivirus

2 1

Missing customers
by Eric W. Bates 26 Nov '18

26 Nov '18

I've labeled a number of our ports as "Cust: somebody", but not all appear on the Port --> Customers page. All the "Cust" labeled ports are on a pair of Junipers and most of them work, but a few are skipped (4 out of 11 are skipped). With debug enabled on the poller, I can see the 'ifalias' containing the Cust string: ifAlias.519 = Cust: WHRC I can also see various other OID's for interface ID 519: ifDescr.519 = ge-1/0/3 ifType.519 = ethernetCsmacd ifOperStatus.519 = up ifName.519 = ge-1/0/3 etc.. Running version 18.10.9472 (stable) thanks for your time. -- Clark 159a, MS 46 508/289-3112

1 0

Change Custom Locations for All Entities
by Josh Williams 26 Nov '18

26 Nov '18

Hello Everyone, I need to change the custom location string of every device. Does anyone know of an easier way of doing this, other than through the web GUI? I tried changing to location column under the device_locations table but that doesn't work. My assumption is that I would just make changes somewhere in the Observium database but I can't seem to find where the custom location data is stored. Any Ideas?

1 0

Searching Issue using Normal user account
by Andres 26 Nov '18

26 Nov '18

Hi Guys, After updated to the last version, I have a issue when I do a port seach using a Normal Account. In older versions i could seach for an interface port description but not now. I realize that it is only possible if I add Ports individually, but not if I only add devices. Any Suggestions? [image: image.png]

1 0

No neighbours shown for Edgeos Devices
by Henry Möller 22 Nov '18

22 Nov '18

3 4

A general questions on apps vs sniped extend ?
by Jonas Karlsson 22 Nov '18

22 Nov '18

Hi, I am new to observium and I am trying to learn the "system". Last week I developed a "app" that shows some status. The client side was super simple but it was somewhat cumbersome on the serverside (find all files to update and definitions etc). This week I tried to use snmpd extend to display the same information. This was super simple both on the client and on the server side (adda custom oid) and it works with alerts! My question is therefore in what circumstances are the "apps" useful? At least for my simple example I did not find any benefits of apps over using snmpd extend and a custom OID. Specially as configuring an app is more cumbersome (on the server side). -- Jonas Karlsson Senior Research Engineer Karlstad University SE-651 88 Karlstad, Sweden 📞 +46 54 700 15 64 📞 +46 70 672 06 20 💬 karlsson.karl.jonas 🗝 0x88765911B284F3A6

2 1

Observium doesn`t shows cbqos module
by Jan Horacek 21 Nov '18

21 Nov '18

Hi guys, I don`t know what`s happened but observium stopped shows flags like CBQOS and if I search for it I don`t see any port marked as CBQOS. nor IPv4, etc... If I`ll do discovery or poller for module cisco-cbqos I`m receiving data from device, just webinterface doesn`t show them. Do you know where could be an issue and how to fix? Thanks Jan

2 9

db error
by Tim Schmidt 20 Nov '18

20 Nov '18

For some reason, I've started receiving "DB Error 2002: No such file or directory" on my Observium installation. Weird thing was that it was literally right in the middle of using the web interface when the error started popping. I've restarted the VM and checked disk space and all looks good. root@tcgobs /opt/observium# ./discovery.php -h none MIB search path: /opt/observium/mibs Cannot find module (LM-SENSORS-MIB): At line 0 in (none) DB Error 2002: No such file or directory Ran the above command line discovery and got this. Not sure what's going on. Any help would be appreciated. Thanks. Tim

2 1

Alert checkers on apps?
by Jonas Karlsson 20 Nov '18

20 Nov '18

Hi, Sorry for a possible noob question but is it possible to create alerts on values reported by the applications system? -- Jonas Karlsson Senior Research Engineer Karlstad University SE-651 88 Karlstad, Sweden 📞 +46 54 700 15 64 📞 +46 70 672 06 20 💬 karlsson.karl.jonas 🗝 0x88765911B284F3A6

1 0

Dashboards
by David Jesus Maturano Sanchez 19 Nov '18

19 Nov '18

Guys. Should the dashboard functionalityworking right now? When I click in any of them, it simply does’t do anything, and obviously doesn’t show anything. Please kindly let me know. Regards. David.

4 14

Contact for Device Type
by noclab 19 Nov '18

19 Nov '18

Hello, Is it possible to add a contact, to get emails only for specific type devices listed under Power? Thanks in advanced Br José

1 0

Custom Names for Graphs in Custom Dashboards
by Pieter De Wit 16 Nov '18

16 Nov '18

Hi Guys, Would it be possible to rename the graphs in the custom dashboard - We have longish names and only the hostname is visible. *Kind Regards,* *Pieter De Wit*

3 5

Using port group in Alerts
by Thibault Richard 16 Nov '18

16 Nov '18

Hello, I've defined a working group of ports which indeed contains what I want : Unfortunately I cannot use this group in an alert definition because I 'm able to define a DEVICE group but not a PORT group The only solution to achieve my goal is to define alerts with the same criterium as the ones used for my group definition Did I miss something ? Best Regards Thibault

3 7

Overall traffic views empty
by Brandwatch NOC 16 Nov '18

16 Nov '18

Hi, Since the update on Tuesday the overall traffic graphs on our front page are empty i.e. Transit & Peering. I tried updating yesterday but no change. Would appreciate a fix, or a clue to the fix ;-) Version Information *Observium* 18.11.9602 (14th November 2018) *OS* Linux 3.16.0-7-amd64 [amd64] (Debian 8.11) *Apache* 2.4.10 (Debian) *PHP* 5.6.38-0+deb8u1 (OPcache: ENABLED) *Python* 2.7.9 *MySQL* 5.5.60-0+deb8u1 (extension: mysqli 5.5.60) *SNMP* NET-SNMP 5.7.2.1 *RRDtool* 1.6.0 *Fping* 3.10 (IPv4 and IPv6) Regards, *Kevin Gee* Brandwatch | Network Engineer network-admin(a)brandwatch.com <kevin(a)brandwatch.com> New York | San Francisco | *Brighton* | Berlin | Stuttgart Email disclaimer <http://www.google.com/url?q=http://www.brandwatch.com/email-disclaimer/&sa=…> Find out what it’s like to work at Brandwatch <http://www.google.com/url?q=http://www.glassdoor.co.uk/Reviews/Brandwatch-R…>

2 1

Observium stop showing pages
by Jan Horacek 16 Nov '18

16 Nov '18

Hi guys, I really need your help. Observium (latest version) stopped to show all sub pages from day to day. I can login into and I see dashboard. On dashboard I`m able to see all graphs and also weather maps are working fine. However if I try open any device or port to see details I`m getting error Not Found The requested URL /health/metric=current/ was not found on this server. Apache configuration didn`t changed at all. Any ideas ? Thanks Jan

2 2

No "mouse-over" on dashboard elements
by Silvio del Val Hinojal 14 Nov '18

14 Nov '18

Hello, "Mouse-over" function over machine names in dashboard doesn't work, I supposse this is correct by now? It works when I click on a machine name, status, alert or whatever and I pass mouse over any element in the screen, showing a floating window with corresponding statistics. This is to confirm this behaviour is right and I don't have anything misconfigured. Regards, Silvio [cid:image001.png@01D03B1C.E8E96F80]<http://www.pandasecurity.com/spain/> Silvio del Val Systems Engineer - Panda Security This e-mail contains confidential information owned by Panda Security. Any such copy, or use, or distribution or disclosure of its contents is strictly forbidden. Please notify us immediately at our phone number (+34 94 425 11 00) if you receive this e-mail and are not its consignee, and then delete this message from your system without copying it, distributing it, or disclosing its contents P Before printing this message, please make sure it is really necessary

2 3

Error in drawing firewall graph
by pierremarie.cossey＠orange.com 14 Nov '18

14 Nov '18

hello I've just updated in 9600 version to use firewall counters on JunOS. It appears a drawing error with specific message : Could not parse color in ''. Thanks for your help Pierre-Marie COSSEY Envoyé de mon Galaxy S8 Orange [firewall_juniper_draw_error.png] _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you.

2 4

Poller wrapper stopped working with Rev 9600
by Andre 14 Nov '18

14 Nov '18

Hi all The poller-wrapper stopped working with Revision 9600. It showed me a problem connecting to database. Reverting to Revision 9599 worked. Best regards Andre

3 10

Alerting on Custom OID
by Pieter De Wit 14 Nov '18

14 Nov '18

Hi Guys, I am trying to build an alert for a value of a custom oid but I seem to be missing something - blame lack of coffee/sleep etc :) The OID is .1.3.6.1.4.1.13400.3.4.4041.1.1.2.1 and I would like to alert when it's below 300. I have created an Alert checker that has a test condition of the following: .1.3.6.1.4.1.13400.3.4.4041.1.1.2.1 lt 300 This doesn't appear to work as it always "OK" the alert even thou the value is +-230. I have even tried "AC Input 1 Voltage" lt 300 without luck. The name comes from the oid_name field in the oids table. How do you create an alert for a custom oid and how do I know what I can alert on, using a custom oid ? *Kind Regards,* *Pieter De Wit*

3 8

Observium updated: 0.SVN.ERROR -> 0.SVN.ERROR
by Jason La 13 Nov '18

13 Nov '18

To all experienced Observium admin, I'm new to Observium and just get the software installed few days ago, I used SVN initially to download and still able to run svn update from the CLI, however, my GUI is not reflect that and keep throwing this SVN.ERROR. Is there anything I miss or any recommendation? Thank you so much in advance. There is a newer revision of Observium available! Version 18.10.9472 (12th November 2018) is 9472 revisions ahead. Version Information Observium 0.SVN.ERROR (1st January 1970) OS Linux 3.10.0-862.14.4.el7.x86_64 [amd64] (RedHat 7.5) Apache 2.4.6 (Red Hat Enterprise Linux) PHP/7.0.32 PHP 7.0.32 (OPcache: ENABLED) Python 2.7.5 MySQL 5.5.60-MariaDB (extension: mysqli 5.5.60-MariaDB) SNMP NET-SNMP 5.7.2 RRDtool 1.6.0 Fping 3.10 (IPv4 only) [cid:image001.png@01D47AD7.745A2890] [cid:image002.png@01D47AD7.745A2890] Jason La | Lead Systems Engineer, Portware Infrastructure Portware, A FactSet Company 99 Park Ave, 16th Floor New York, NY 10016 (212) 370 8353 www.factset.com<http://www.factset.com/>

2 1

Dashboard Oops
by Hamilton, Kent 12 Nov '18

12 Nov '18

Okay, I was playing with the Dashboard this morning (Observium 18.11.9593) and now all I get is "This page isn't working observium.exegy.net didn't send any data." How can I reset things so I get a working Observium back? ________________________________ This e-mail and any documents accompanying it may contain legally privileged and/or confidential information belonging to Exegy, Inc. Such information may be protected from disclosure by law. The information is intended for use by only the addressee. If you are not the intended recipient, you are hereby notified that any disclosure or use of the information is strictly prohibited. If you have received this e-mail in error, please immediately contact the sender by e-mail or phone regarding instructions for return or destruction and do not use or disclose the content to others.

2 1

Re: [Observium] observium Digest, Vol 100, Issue 10
by Pieter Meyer 12 Nov '18

12 Nov '18

Thanks adam I see its resolved in version 9593 Regards Pieter Meyer Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: +27 83 233 6614 map <https://goo.gl/maps/WHe3soT1fHm> | website <http://www.convergedgroup.net/> | company blog <http://www.convergedgroup.net/blog/> | linkedin <http://www.linkedin.com/company/converged-telecoms>

1 0

problem with api
by Rowlands Mark 12 Nov '18

12 Nov '18

Version Information Observium 18.11.9580 (9th November 2018) OS Linux 4.4.0-116-generic [amd64] (Ubuntu 16.04) Apache 2.4.18 (Ubuntu) PHP 7.0.32-0ubuntu0.16.04.1 (OPcache: ENABLED) Python 2.7.12 MySQL 10.3.10-MariaDB-1:10.3.10+maria~xenial-log (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.5.5 (rrdcached 1.5.5: unix:/var/run/rrdcached.sock) Fping 3.13 (IPv4 and IPv6) Trying to add a device :- I have tried the following incantations :- curl -u admin:PASSWORD http://observium.riksbyggen.intra/api/v0/devices/ -H "Content-Type: application/json" -X POST -d '{"hostname":"papp01-exo"}' curl -u admin:PASSWORD http://observium.riksbyggen.intra/api/v0/devices/ -H "Content-Type: application/json" -X POST -d '{"papp01-exo":"localhost"}' curl -u admin:PASSWORD http://observium.riksbyggen.intra/api/v0/devices/ -H "Content-Type: application/json" -X POST -d '{"papp01-exo":"observium.riksbyggen.intra"}' curl -u admin:POSSWORD http://observium.riksbyggen.intra/api/v0/devices/ -H "Content-Type: application/json" -X POST -d '{'papp01-exo':'observium'}' all of which return "Hostname Required"

2 3

Re: [Observium] observium Digest, Vol 100, Issue 7
by Pieter Meyer 12 Nov '18

12 Nov '18

Hi Adam Where would I look for error in the Java console? Regards Pieter Meyer Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: +27 83 233 6614 map <https://goo.gl/maps/WHe3soT1fHm> | website <http://www.convergedgroup.net/> | company blog <http://www.convergedgroup.net/blog/> | linkedin <http://www.linkedin.com/company/converged-telecoms> CAUTION: This email and any attachments may contain information that is confidential and subject to legal privilege. If you are not the intended recipient, you must not read, use, disseminate, distribute or copy this email or any attachments. If you have received this email in error, please notify us immediately and erase this email and any attachments. Thank you. DISCLAIMER: To the maximum extent permitted by law, Converged Group is not liable (including in respect of negligence) for viruses or other defects or for changes made to this email or to any attachments. Before opening or using attachments, check them for viruses and other defects. The information contained in this document is confidential to the addressee and is not the view nor the official policy of Converged Group unless otherwise stated. -----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of observium-request(a)observium.org Sent: Thursday, 08 November 2018 14:00 To: observium(a)observium.org Subject: observium Digest, Vol 100, Issue 7 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: 1024 TB limit on disks when monitored over SNMP...? (Henrik Cednert (Filmlance)) 2. Possibility of disabling a health status (Patrick Kambach) 3. Landing page goes blank if upgraded from 9556 to 9558 (Pieter Meyer) 4. Re: Landing page goes blank if upgraded from 9556 to 9558 (Markus Klock) 5. Re: Landing page goes blank if upgraded from 9556 to 9558 (Pieter Meyer) 6. Re: Landing page goes blank if upgraded from 9556 to 9558 (Adam Armstrong) 7. Re: OS version mismatch in syslog emails (Ben Chase) 8. Neighbours (Christian Eriksson) 9. Re: Neighbours (Adam Armstrong) 10. Re: Neighbours (Adam Armstrong) 11. Re: Neighbours (Adam Armstrong) 12. Re: Neighbours (Christian Eriksson) 13. Re: Neighbours (Adam Armstrong) 14. Re: 1024 TB limit on disks when monitored over SNMP...? (Henrik Cednert (Filmlance)) 15. Re: 1024 TB limit on disks when monitored over SNMP...? (Adam Armstrong) 16. Re: Landing page goes blank if upgraded from 9556 to 9558 (Robert Williams) 17. Re: Landing page goes blank if upgraded from 9556 to 9558 (Adam Armstrong) 18. Contact for Device Type (noclab) 19. Re: Landing page goes blank if upgraded from 9556 to 9558 (Niklas Larsson) 20. Re: Landing page goes blank if upgraded from 9556 to 9558 (Niklas Larsson) 21. Re: Landing page goes blank if upgraded from 9556 to 9558 (Adam Armstrong) 22. Re: Landing page goes blank if upgraded from 9556 to 9558 (Rowlands Mark) 23. Re: Landing page goes blank if upgraded from 9556 to 9558 (Adam Armstrong) ---------------------------------------------------------------------- Message: 1 Date: Wed, 7 Nov 2018 12:26:34 +0000 From: "Henrik Cednert (Filmlance)" <henrik.cednert(a)filmlance.se> To: Observium <observium(a)observium.org> Subject: Re: [Observium] 1024 TB limit on disks when monitored over SNMP...? Message-ID: <984C9B9C-F27F-4352-AAF5-B3B47A6922E1(a)filmlance.se> Content-Type: text/plain; charset="utf-8" Oh my! Oh yeah! Wow! Thanks! =) Indeed I see it now. Some draw error on graph and possible size error. But size is close enough for me. =) Will investigate the draw error. [cid:17280432-131A-4717-A20D-467E62D55BE0@metronome.local] Many thanks!!! -- Henrik Cednert / + 46 704 71 89 54 / CTO / Filmlance Disclaimer, the hideous bs disclaimer at the bottom is forced, sorry. ¯\_(ツ)_/¯ On 7 Nov 2018, at 11:57, Adam Armstrong via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: Hi Henrik, I've made some minor changes to the storage discovery in r9557. These might make this drive appear. It might still have broken sizes though :) adam. On 2018-11-07 09:29:03, Henrik Cednert (Filmlance) via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: Morning Adam I’m not sure that all data reported in dskTable is correct. I assume that there’s some sort of math that happens since I don’t really get all the numbers to add up. dskPercent for sure seems about right, but not sure about Total, Avail and Used. I did update net-snmp to latest that was available (1:5.5-60.el6 ), but no change in behaviour. df | grep ddnnas0 /dev/ddnnas0 1772965855232 979888488448 793077366784 56% /ddnnas0 snmpwalk -v2c -c ddn4ucommunity localhost dskTable | grep .1 UCD-SNMP-MIB::dskIndex.1 = INTEGER: 1 UCD-SNMP-MIB::dskPath.1 = STRING: /ddnnas0 UCD-SNMP-MIB::dskDevice.1 = STRING: /dev/ddnnas0 UCD-SNMP-MIB::dskMinimum.1 = INTEGER: -1 UCD-SNMP-MIB::dskMinPercent.1 = INTEGER: 3 UCD-SNMP-MIB::dskTotal.1 = INTEGER: 2147483647 UCD-SNMP-MIB::dskAvail.1 = INTEGER: 2147483647 UCD-SNMP-MIB::dskUsed.1 = INTEGER: 2147483647 UCD-SNMP-MIB::dskPercent.1 = INTEGER: 55 UCD-SNMP-MIB::dskPercentNode.1 = INTEGER: 3 UCD-SNMP-MIB::dskTotalLow.1 = Gauge32: 3439329280 UCD-SNMP-MIB::dskTotalHigh.1 = Gauge32: 412 UCD-SNMP-MIB::dskAvailLow.1 = Gauge32: 2803367936 UCD-SNMP-MIB::dskAvailHigh.1 = Gauge32: 184 UCD-SNMP-MIB::dskUsedLow.1 = Gauge32: 635961344 UCD-SNMP-MIB::dskUsedHigh.1 = Gauge32: 228 UCD-SNMP-MIB::dskErrorFlag.1 = INTEGER: noError(0) UCD-SNMP-MIB::dskErrorMsg.1 = STRING: Cheers -- Henrik Cednert / + 46 704 71 89 54 / CTO / Filmlance Disclaimer, the hideous bs disclaimer at the bottom is forced, sorry. ¯\_(ツ)_/¯ On 7 Nov 2018, at 08:33, Adam Armstrong via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: Hi Henrik, Can you tell if the data reported in dskTable is correct? We use dskTable to fill in invalid data in hrStorageTable sometimes, but we don't outright collect data from dskTable. I seem to recall this is an issue with ZFS too, and switching to a later version of net-snmp fixes it. There are sadly no 5.8 (or even 5.7) packages for EL6 though (not that I could find!), so you would have to create one. Nothing really depends upon net-snmp, so no real risk in breaking anything! Once upon a time I had 5.6 packages for EL6 floating around from an old requirement, but I seem to have lost them. adam. On 2018-11-06 22:00, Henrik Cednert (Filmlance) via observium wrote: Heya I really wish i was at your level of expertise here Adam, sadly I’m not. =( I googled a bit and walked hrStorageTable and this is the hrStorageDescr from that: HOST-RESOURCES-MIB::hrStorageDescr.1 = STRING: Physical memory HOST-RESOURCES-MIB::hrStorageDescr.3 = STRING: Virtual memory HOST-RESOURCES-MIB::hrStorageDescr.6 = STRING: Memory buffers HOST-RESOURCES-MIB::hrStorageDescr.7 = STRING: Cached memory HOST-RESOURCES-MIB::hrStorageDescr.10 = STRING: Swap space HOST-RESOURCES-MIB::hrStorageDescr.31 = STRING: / HOST-RESOURCES-MIB::hrStorageDescr.35 = STRING: /dev/shm HOST-RESOURCES-MIB::hrStorageDescr.36 = STRING: /boot HOST-RESOURCES-MIB::hrStorageDescr.37 = STRING: /boot-rcvy HOST-RESOURCES-MIB::hrStorageDescr.38 = STRING: /crash HOST-RESOURCES-MIB::hrStorageDescr.39 = STRING: /rcvy HOST-RESOURCES-MIB::hrStorageDescr.40 = STRING: /var HOST-RESOURCES-MIB::hrStorageDescr.41 = STRING: /var-rcvy So no luck there. In diskTable I do see it though: UCD-SNMP-MIB::dskPath.1 = STRING: /ddnnas0 UCD-SNMP-MIB::dskPath.2 = STRING: / So with this, any hints on how to make it work? Or is the first step to update net-snmp? Installed Packages net-snmp.x86_64 1:5.5-54.el6_7.1 @ddn-dvd Cheers and thanks a million -- Henrik Cednert / + 46 704 71 89 54 / CTO / FILMLANCE Disclaimer, the hideous bs disclaimer at the bottom is forced, sorry. ¯\_(ツ)_/¯ On 6 Nov 2018, at 22:53, Adam Armstrong via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: We actually use the HOST-RESOURCES-MIB hrStorage table, not the UCD-MIB dskTable. Have you checked what SNMP is sending? You can walk the hrStorageTable and dskTable to see what is returned. I seem to remember some issue with SNMP not picking up "strange" filesystems. Making sure you're running the very latest net-snmp might help. Adam. On 2018-11-06 21:17, Henrik Cednert (Filmlance) via observium wrote: Hello So I got the ‘go ahead’ from DDN to monitor it directly on the server. Strange thing is, I’ve added the mount point to the /etc/snmpd.conf but it still doesn’t appear in observium. I’ve played with the syscontact just to make sure that the snmpd.conf is actually read properly upon discovery and poll, and it is. But it does not seem to take this string from conf: disk /ddnnas0 80% And that is the actual mount point, as seen from ‘mount’ here: /dev/ddnnas0 on /ddnnas0 type gpfs (rw,relatime,mtime,nfssync,dev=ddnnas0) Am i missing something obvious? If so, please be gentle and throw me with great force, and maybe anger, in the right direction. =) Cheers and thanks -- Henrik Cednert / + 46 704 71 89 54 / CTO / FILMLANCE Disclaimer, the hideous bs disclaimer at the bottom is forced, sorry. ¯\_(ツ)_/¯ On 23 Oct 2018, at 21:32, Chris Neam via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: We monitor our GPFS system directly from the GridScaler and have been able to monitor up to 2.6PB so far. I'd guess it is something with the way Windows is handling it. On Tue, Oct 23, 2018 at 12:54 PM Henrik Cednert (Filmlance) via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: Hello We just expanded a volume on a DDN GPFS system to over 1 PB. I monitor this volume via SNMP via a Windows server. Noticed that I run into a 1024TB cap on the size there though. Trying to understand where this cap is comping from, if it’s the SNMP on windows or something in observium. Anyone that’ve dealt with this? Cheers and thanks -- Henrik Cednert / + 46 704 71 89 54 / CTO / FILMLANCE Disclaimer, the hideous bs disclaimer at the bottom is forced, sorry. ¯\_(ツ)_/¯ DISCLAIMER The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful. _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- CHRIS NEAM US Mobile: +1 (703) 628 7897 [1] E-mail: chris.neam(a)vricon.com<mailto:chris.neam@vricon.com> VRICON Visiting address US: 8280 Greensboro Drive, Suite 850, McLean, VA, 22102, USA Sweden: Bröderna Ugglas gata, 581 88 Linköping, Sweden www.vricon.com<http://www.vricon.com/> [1] [2] This e-mail is private and confidential between the sender and the addressee. In the event of misdirection, the recipient is prohibited from using, copying or disseminating it or any information in it. Please notify the above if any misdirection. <Screen Shot 2018-10-23 at 15.29.23.png>_______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium Links: ------ [1] tel:%2B1%20%28703%29%20628%207897 [2] http://www.vricon.com/ _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium DISCLAIMER The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful. Links: ------ [1] http://www.vricon.com/ _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium Disclaimer The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful. _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

One line change to make Teams notifications look good on phone
by Niklas Larsson 12 Nov '18

12 Nov '18

Hi, adding a summary line/item makes Teams notifications look so much better in lists/phone: Index: includes/alerting/teams.inc.php =================================================================== --- includes/alerting/teams.inc.php (revision 9590) +++ includes/alerting/teams.inc.php (working copy) @@ -19,6 +19,7 @@ // JSON data $data_string = json_encode(array( 'title' => $message_tags['TITLE'], + 'summary' => $message_tags['TITLE'], 'text' => ' ', 'sections' => array( array(

2 1

Status boxes expanding all
by Tomasz Karczewski 10 Nov '18

10 Nov '18

HI, It would be nice status boxes expand after click on „more…” Earlier all status boxes were displayed on frontpage. Tomasz Karczewski Administrator Sieci <mailto:tkarczewski@man.olsztyn.pl> tkarczewski(a)man.olsztyn.pl <http://www.man.olsztyn.pl> http://www.man.olsztyn.pl <http://www.uwm.edu.pl> http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

1 0

Changed 'smtp_host' address in config.php isn't being recognized
by Joe Brouillette 09 Nov '18

09 Nov '18

Hey all, we upgraded our Exchange server and now it has a new address. I changed the old address, xxx.xxx.xxx.102 to the new address, xxx.xxx.xxx.105 in config.php and Observium still sees the old address. Nov 6 12:00:19 Observe postfix/smtp[27371]: connect to 192.168.2.102[192.168.2.102]:25: No route to host The new address was also changed in /etc/postfix/main.cf. I've rebooted the server a couple of times but no joy. I must be missing something really simple here but I don't have a clue what it could be. Is there still another location where I need to change my new Exchange server's address? Thanks, Joe Brouillette IT Specialist Link Transit 509.664.7643 jobee(a)linktransit.com<mailto:jobee@linktransit.com> [EmailFooter]

2 2

Intentionally adding a duplicate device
by Jason Lixfeld 09 Nov '18

09 Nov '18

Hello, Previously I was able to add a duplicate entry for a device. At the time, it seemed like the easiest way to work around IOS-XR not being able to pull BGP session information inside a VRF from the default snmp context. Creating a separate SNMP context on the box for the VRF(s) in question, with a different community for each would let the duplicate entries poll the BGP session info from within whatever VRF that context included. Now, when I try to add a duplicate it fails due to pre-existing sysName, snmpEngineID and entPhysicalSerialNum. Is there a way to add duplicates anymore, or perhaps a different way to collect BGP session info from within VRF (in addition to the global table)? Thanks in advance.

2 2

Cisco Firepower (FTD)
by Benjamin Moore 09 Nov '18

09 Nov '18

I saw a thread back a while regarding Cisco Firepower and Observium. I'm currently testing version 6.3 (testing for 6.4 will begin soon) and would be happy to provide anything needed to get the device fully supported in Observium. Always happy to help!

1 0

Status boxes not configured
by Tomasz Karczewski 09 Nov '18

09 Nov '18

After dashboard changes my device status boxes dissapeared. When i try to add status boxes in new way i see „unconfigured module” How to set up this? Tomasz Karczewski Administrator Sieci <mailto:tkarczewski@man.olsztyn.pl> tkarczewski(a)man.olsztyn.pl <http://www.man.olsztyn.pl> http://www.man.olsztyn.pl <http://www.uwm.edu.pl> http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

5 9

Missing Ports
by Tim Schmidt 09 Nov '18

09 Nov '18

I've got a Peplink Balance 310 that I've put into Observium. It reads the device and picks up processor, memory, etc. For the ports though, it is only picking up 2 wan ports and one lan port. There are another 3 lan ports that it is not picking up. Peplink is a newer product for me so I'm not sure if I'm missing something or what. I'm guessing it's something to do with the EtherLike-MIB that is being used. Any help would be appreciated. Thanks! Tim Schmidt

4 5

New Device AKCP SensorProbe2Plus
by Stefan.Immel＠stroeher.de 09 Nov '18

09 Nov '18

We startet to use a SensorProbe2 Plus from AKCP but unfortunatly it is not yet supported by observium. Anybody out there who uses it too and has it implemented? If not, I'm looking for ways to integrate it but unfortunatly I cannot find the right files to do that. Where are the definitions that contain the mappings from sysObjectID to the right OS and MIBS?

2 1

Landing page goes blank if upgraded from 9556 to 9558
by Pieter Meyer 08 Nov '18

08 Nov '18

Hi Adam Below is my landing page on version 9556 After upgrade to 9558 it is just blank? Regards Pieter Meyer Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: +27 83 233 6614 map <https://goo.gl/maps/WHe3soT1fHm> | website <http://www.convergedgroup.net/> | company blog <http://www.convergedgroup.net/blog/> | linkedin <http://www.linkedin.com/company/converged-telecoms>

6 10

Contact for Device Type
by noclab 08 Nov '18

08 Nov '18

Hello, Is it possible to add a contact, to get emails only for specific type devices listed under Power? Thanks in advanced Br José

1 0

1024 TB limit on disks when monitored over SNMP...?
by Henrik Cednert (Filmlance) 08 Nov '18

08 Nov '18

Hello We just expanded a volume on a DDN GPFS system to over 1 PB. I monitor this volume via SNMP via a Windows server. Noticed that I run into a 1024TB cap on the size there though. Trying to understand where this cap is comping from, if it’s the SNMP on windows or something in observium. Anyone that’ve dealt with this? Cheers and thanks -- Henrik Cednert / + 46 704 71 89 54 / CTO / Filmlance Disclaimer, the hideous bs disclaimer at the bottom is forced, sorry. ¯\_(ツ)_/¯ Disclaimer The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.

4 15

Neighbours
by Christian Eriksson 07 Nov '18

07 Nov '18

Hi Adam https://jira.observium.org/browse/OBS-2809 This seems to have broken something. Not able to filter by device at all now. It show all results regardless Vänliga hälsningar / Best regards, [Advania_Trappa_CMYK] Christian Eriksson System Consultant [cid:image002.png@01D476E4.558EF400]<mailto:christian.eriksson@advania.se>[Advania-Bikupa Facebook]<https://www.facebook.com/advania.se/>[Advania-Bikupa LinkedIn]<https://www.linkedin.com/company/advania-ab/>[Advania-Bikupa Twitter]<https://twitter.com/advania_se> +4641090488<tel:+4641090488> | +46761400400<tel:+46761400400> www.advania.se<http://www.advania.se/> | Stockholm<https://www.google.se/maps/place/Advania+Sverige+AB/@59.3062176,18.0278762,…>

2 5

OS version mismatch in syslog emails
by Ben Chase 07 Nov '18

07 Nov '18

Hi all, I’m getting syslog emails from a particular router (Juniper MX) that reports an older OS version than what is installed. The observium web interface and other email alerts show the correct version as does ’show version’ on the box itself. I’d like to determine if the router is sending bad info or if Observium is reporting old data in this one instance for some reason. Thanks for any help. ---- Version Information Observium 18.11.9556 (6th November 2018) OS Linux 3.10.0-693.21.1.el7.x86_64 [amd64] (CentOS 7) Apache 2.4.6 (CentOS) OpenSSL/1.0.2k-fips mod_fcgid/2.3.9 PHP/7.0.29 PHP 7.0.29 (OPcache: ENABLED) Python 2.7.5 MySQL 5.5.56-MariaDB (extension: mysqli 5.5.56-MariaDB) SNMP NET-SNMP 5.7.2 RRDtool 1.6.0 Fping 3.10 (IPv4 only) -- Ben Chase

2 2

SNMP Centos 7 - Traffic flow
by John Morris 07 Nov '18

07 Nov '18

Hi All, I have multiple centos servers which are collecting data in Observium, but it doesn't show network traffic or sensor information? Any ideas? Thanks John Morris Head of Cloud Services Tel: 01978 858512 Web: www.pacetelecom.co.uk<http://www.pacetelecom.co.uk/> Address: Unit 2 Zenith House, Gresford Industrial Park, Wrexham, LL12 8LX [cid:image001.png@01D41F71.F3E93720]<http://www.pacetelecom.co.uk/refer>

2 1

FW: Changed 'smtp_host' address in config.php isn't being recognized
by Joe Brouillette 06 Nov '18

06 Nov '18

Sigh... It just started working. I guess I didn't wait long enough for something's internal timer to kick over. Thanks, Joe Brouillette IT Specialist Link Transit 509.664.7643 jobee(a)linktransit.com<mailto:jobee@linktransit.com> From: Joe Brouillette Sent: Tuesday, November 6, 2018 12:36 PM To: 'Observium' <observium(a)observium.org> Subject: Changed 'smtp_host' address in config.php isn't being recognized Hey all, we upgraded our Exchange server and now it has a new address. I changed the old address, xxx.xxx.xxx.102 to the new address, xxx.xxx.xxx.105 in config.php and Observium still sees the old address. Nov 6 12:00:19 Observe postfix/smtp[27371]: connect to 192.168.2.102[192.168.2.102]:25: No route to host The new address was also changed in /etc/postfix/main.cf. I've rebooted the server a couple of times but no joy. I must be missing something really simple here but I don't have a clue what it could be. Is there still another location where I need to change my new Exchange server's address? Thanks, Joe Brouillette IT Specialist Link Transit 509.664.7643 jobee(a)linktransit.com<mailto:jobee@linktransit.com> [EmailFooter]

3 2

observium 18.10.9550
by Pieter Meyer 06 Nov '18

06 Nov '18

Hi Adam After upgrading to 18.10.9550 from observium 18.10.9519 we noticed that our map on the landing page stopped working and that rrd graphs stopped updating. We also notice that smokeping rrd graphs was still working, Downgrading to 18.10.9542 fixed the map on the landing page but not the rrd graphs. Downgrading to 18.10.9519 resolved all issues Regards Pieter Meyer Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: +27 83 233 6614 <https://goo.gl/maps/WHe3soT1fHm> map | <http://www.convergedgroup.net/> website | <http://www.convergedgroup.net/blog/> company blog | <http://www.linkedin.com/company/converged-telecoms> linkedin CAUTION: This email and any attachments may contain information that is confidential and subject to legal privilege. If you are not the intended recipient, you must not read, use, disseminate, distribute or copy this email or any attachments. If you have received this email in error, please notify us immediately and erase this email and any attachments. Thank you. DISCLAIMER: To the maximum extent permitted by law, Converged Group is not liable (including in respect of negligence) for viruses or other defects or for changes made to this email or to any attachments. Before opening or using attachments, check them for viruses and other defects. The information contained in this document is confidential to the addressee and is not the view nor the official policy of Converged Group unless otherwise stated.

2 12

device status
by Eric W. Bates 06 Nov '18

06 Nov '18

I've got a device whose status has changed to 0. How does that happen? How do I revert the status (other than obvious SQL change)? -- Clark 159a, MS 46 508/289-3112

2 2

BGP Prefix Count Graphs
by Robert Williams 06 Nov '18

06 Nov '18

Hi, It's only occasional that we use these particular graphs, so I can't say when it stopped working unfortunately :( As far as I can see, every 'Prefix Count' graphs is broken / non-existent for every platform we have (IOS + IOS-XR). <server>/routing/protocol=bgp/view=graphs/graph=prefixes_ipv4unicast/ [cid:image002.png@01D4751F.0680B040] However, all the 'Update Counters' graphs are OK, for exactly the same neighbours: [cid:image004.jpg@01D4751F.0680B040] A quick check of the RRDs in the device folders shows that anything starting with "cbgp-" appears to contain the neighbour and address-family, rather than a 'numeric' name: [cid:image007.png@01D4751E.6EAFF140] So maybe it should be looking at those? Rather than cbgp-3176.rrd for example? We have recently completed a round of IOS-XR upgrades so I'm not entirely confident this is caused by an issue on the Observium side to be honest! Cheers, Robert Williams Custodian Data Centres https://www.CustodianDC.com

2 2

Monitoring Fortinet firewalls
by Scott Kaiser 06 Nov '18

06 Nov '18

3 2

Frontpage map not zoom
by Tomasz Karczewski 05 Nov '18

05 Nov '18

Hi, After update to latest version frontpage map stopped zooming ($config['frontpage']['map']['zoom'] = '8';). Tomasz Karczewski Administrator Sieci <mailto:tkarczewski@man.olsztyn.pl> tkarczewski(a)man.olsztyn.pl <http://www.man.olsztyn.pl> http://www.man.olsztyn.pl <http://www.uwm.edu.pl> http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

3 4

Cisco Firepower Threat Defense, Version 6.2.3.4 (Build 42), ASA Version 9.9(2)15
by David Jesus Maturano Sanchez 05 Nov '18

05 Nov '18

Hello. I just added new Cisco FTD appliance, but there is no information about CPU, Memory, firewall statistics. And this is how the graphics looks like: [cid:image001.png@01D47501.57E9E370] As far as I know, MIBs has not changed. Would you please let me know if would it be supported? Regards. David.

3 3

Linux distro
by Jason Vanlandingham 05 Nov '18

05 Nov '18

I'm building a new box to replace my ancient Observium server. I'm most comfortable with CentOS, but most of the help docs I've seen appear to be geared toward Ubuntu. Is there a great reason to go Ubuntu over CentOS? Or is there another distro that is better for Observium? I stayed away from Ubuntu because I didn't care for the GUI, but I realized I have probably spent less than a hour per year in the GUI of that machine.

3 2

Cisco C6848 cbQoS
by Svensson Fredrik A 05 Nov '18

05 Nov '18

Hello! We are marking traffic with an input policymap, but in Observium all the classes are named / (input) , we have to guess what class is in what graph. Is there a way to fix this? I Guess its a IOS issue, we are on 15.2(2)SY3. Regards Fredrik

2 1

get Inventory via API
by Henry Möller 05 Nov '18

05 Nov '18

Hello, We trying to get information's about the Inventory from Observium. Mainly we trying to get the Serial Number and the Model Number from observium. This works well for a single switch. But it is not working if we have a stacked switch. In this case we get only the serial number of the stack-master. Is there a way to get all the information's that are listed on the inventory via API? [cid:image001.jpg@01D474E6.70D7D4C0] Best Regards Henry Möller ------------------------------------------------------------ Phone: +49 30 520 041 698 Fax: +49 30 520 041 699 Mail: Henry.Moeller(a)pinguin.ag ------------------------------------------------------------ Phone: +49.30.30 36 63 366 Fax: +49.30.30 36 63 367 E-Mail: info(a)pinguin.ag<mailto:info@pinguin.ag> www.pinguin.ag<http://www.pinguin.ag> ------------------------------------------------------------ [cid:pinguin.ag_f1f2f94b-4088-4a1c-afba-e73816a444e1.png] Pinguin AG Hauptstraße 8 | 10827 Berlin | Germany USt-ID: DE240701807 Sitz der Gesellschaft: Berlin-Schöneberg, AG Berlin-Charlottenburg, HRB 101380 B Vorstand: Roland Becker, Aufsichtsratsvorsitzender: Clemens C. Vogelsberg

3 3

fs.com device support
by Pieter Meyer 02 Nov '18

02 Nov '18

HI Adam Can you please add support for devices from fs.com https://www.fs.com/products/72945.html https://www.fs.com/products/29127.html https://www.fs.com/products/73467.html https://www.fs.com/products/29122.html https://www.fs.com/products/29123.html Regards Pieter Meyer

1 0

'rrdcached' Config Issue
by Gordon Cheng (gocheng) 02 Nov '18

02 Nov '18

Hi all, In an attempt to improve the performance (previous email thread with subject Performance Issue - High CPU with 'mysqld'?), I'm trying to use 'rrdcached' on a new setup (version 18.9.9428 (9th September 2018) with the following configuration: === sjc-observium-1:/etc/init.d# cat rrdcached <...snipped...> # Path to the apachectl script, server binary, and short-form for messages. rrdcached=/usr/sbin/rrdcached prog=rrdcached pidfile=/var/run/rrdcached/rrdcached.pid sockfile=/var/run/rrdcached/rrdcached.sock lockfile=/var/lock/subsys/rrdcached RETVAL=0 <...snipped...> - sjc-observium-1:/etc/sysconfig# cat rrdcached <...snipped...> RRDCACHED_USER="apache" OPTIONS="-w 1800 -z 1800 -f 3600 -s apache -l unix:/var/run/rrdcached/rrdcached.sock -j /var/tmp -m 664 -F -b /opt/observium/rrd -B" SOCKPERMS=0660 <...snipped...> - sjc-observium-1:/usr/lib/tmpfiles.d# cat rrdcached.conf d /run/rrdcached - apache apache sjc-observium-1:/usr/lib/tmpfiles.d# - sjc-observium-1:/opt/observium# grep rrd config.php //rrdcached #$config['rrdcached'] = "unix:/var/run/rrdcached/rrdcached.sock"; <<<====== will un-comment once rrdcached is configured and running sjc-observium-1:/opt/observium# - sjc-observium-1:/root# service rrdcached stop Stopping rrdcached (via systemctl): [ OK ] sjc-observium-1:/root# service rrdcached start Starting rrdcached (via systemctl): Job for rrdcached.service failed because a timeout was exceeded. See "systemctl status rrdcached.service" and "journalctl -xe" for details. [FAILED] sjc-observium-1:/root# - sjc-observium-1:/opt/observium# systemctl status rrdcached.service -l ● rrdcached.service - SYSV: rrdcached is a daemon that receives updates to existing rrd files, accumulates them, and writes updates to file Loaded: loaded (/etc/rc.d/init.d/rrdcached; bad; vendor preset: disabled) Active: failed (Result: timeout) since Wed 2018-10-31 16:39:48 PDT; 11min ago Docs: man:systemd-sysv-generator(8) Process: 2449 ExecStart=/etc/rc.d/init.d/rrdcached start (code=exited, status=0/SUCCESS) CGroup: /system.slice/rrdcached.service └─2453 /usr/sbin/rrdcached -w 1800 -z 1800 -f 3600 -s apache -l unix:/var/run/rrdcached/rrdcached.sock -j /var/tmp -m 664 -F -b /opt/observium/rrd -B -p /var/run/rrdcached/rrdcached.pid -l /var/run/rrdcached/rrdcached.sock Oct 31 16:34:51 sjc-observium-1 rrdcached[2453]: queue_thread_main: rrd_update_r (/opt/observium/rrd/aan-oob01/perf-pollermodule-fdb-table.rrd) failed with status -1. (/opt/observium/rrd/aan-oob01/perf-pollermodule-fdb-table.rrd: illegal attempt to update using time 1541024231 when last update time is 1541028534 (minimum one second step)) Oct 31 16:34:51 sjc-observium-1 rrdcached[2453]: queue_thread_main: rrd_update_r (/opt/observium/rrd/aan-oob01/perf-pollermodule-entity-physical.rrd) failed with status -1. (/opt/observium/rrd/aan-oob01/perf-pollermodule-entity-physical.rrd: illegal attempt to update using time 1541024224 when last update time is 1541028525 (minimum one second step)) Oct 31 16:34:51 sjc-observium-1 rrdcached[2453]: queue_thread_main: rrd_update_r (/opt/observium/rrd/aan-oob01/perf-pollermodule-hr-mib.rrd) failed with status -1. (/opt/observium/rrd/aan-oob01/perf-pollermodule-hr-mib.rrd: illegal attempt to update using time 1541024165 when last update time is 1541028466 (minimum one second step)) Oct 31 16:34:51 sjc-observium-1 rrdcached[2453]: queue_thread_main: rrd_update_r (/opt/observium/rrd/aan-oob01/perf-pollermodule-ipSystemStats.rrd) failed with status -1. (/opt/observium/rrd/aan-oob01/perf-pollermodule-ipSystemStats.rrd: illegal attempt to update using time 1541024166 when last update time is 1541028467 (minimum one second step)) Oct 31 16:34:51 sjc-observium-1 rrdcached[2453]: queue_thread_main: rrd_update_r (/opt/observium/rrd/aan-oob01/perf-pollermodule-loadbalancer.rrd) failed with status -1. (/opt/observium/rrd/aan-oob01/perf-pollermodule-loadbalancer.rrd: illegal attempt to update using time 1541024223 when last update time is 1541028524 (minimum one second step)) Oct 31 16:34:51 sjc-observium-1 rrdcached[2453]: queue_thread_main: rrd_update_r (/opt/observium/rrd/aan-oob01/perf-pollermodule-mempools.rrd) failed with status -1. (/opt/observium/rrd/aan-oob01/perf-pollermodule-mempools.rrd: illegal attempt to update using time 1541024147 when last update time is 1541028719 (minimum one second step)) Oct 31 16:39:48 sjc-observium-1 systemd[1]: rrdcached.service start operation timed out. Terminating. Oct 31 16:39:48 sjc-observium-1 systemd[1]: Failed to start SYSV: rrdcached is a daemon that receives updates to existing rrd files, accumulates them, and writes updates to file. Oct 31 16:39:48 sjc-observium-1 systemd[1]: Unit rrdcached.service entered failed state. Oct 31 16:39:48 sjc-observium-1 systemd[1]: rrdcached.service failed. sjc-observium-1:/opt/observium# === Any suggestions or docs/links showing how it can be resolved? Thanks. - Gordon

2 4

Sensor issues since approx November 1st
by Anthony Somerset 02 Nov '18

02 Nov '18

Hi There I’m running a test bed of observium at home seperately of our main installation - i had previously written a very basic observium agent module that polls current power usage for a home monitoring sensor and outputs it, and then a custom polling module that reads this data and basically graphs it as a power sensor under a device (https://gist.github.com/anthonysomerset/3860b7a3b650d8bbbf53faac2d5eeab5 <https://gist.github.com/anthonysomerset/3860b7a3b650d8bbbf53faac2d5eeab5>) the unix-agent is working same as before but since i updated overnight on 1st november the graph has disappeared and my event log is filled up with sensor added events: also under the device itself the sensor is saying deleted around 5 days ago (2018-10-27 00:01:04) this looks like immediately after it updated on that day (looks like last commit on that day was 9517) any thoughts on how i need to fix? Kind regards, Anthony Somerset Somerset Technical Solutions Ltd. www.somersettechsolutions.co.uk Registered in the UK – Company no. 07738444 VAT Registration No: 140 6916 22 T: +44 (0) 33 0088 2751 E: anthony(a)somersettechsolutions.co.uk PGP: 0x7C892BF5

2 2

Observium Syslog issues
by David Rossi 01 Nov '18

01 Nov '18

I have an installation of Observium that has been up and running perfectly for about 18 months. Last Friday I ran updates and now syslog is no longer working. I have found that prior to the upgrade, rsyslog was version 7, now I am at Version 8. In searching I found that a few configuration file changes, I did those, and still a no go. Has anyone else come across this? I am a novice at Linux, and totally at a loss here. I can do a tcpdump and sure enough the syslog messages are hitting the server, but not displayed within Observium. Any help would be appreciated, but, please keep in mind I am a Centos novice. Dave Rossi.

4 11

Juniper
by Christian Eriksson 01 Nov '18

01 Nov '18

Hi, I have some MX104 routers and now there is a firewall button with some empty graphs. What is the meaning of this? :) [cid:image001.png@01D471D0.1A58CAF0] Regards Christian

2 1

Auto install script
by Scott L. Kaiser 31 Oct '18

31 Oct '18

2 1

New Device AKCP SensorProbe2Plus
by Stefan.Immel＠stroeher.de 31 Oct '18

31 Oct '18

We startet to use a SensorProbe2 Plus from AKCP but unfortunatly it is not yet supported by observium. Anybody out there who uses it too and has it implemented? If not, I'm looking for ways to integrate it but unfortunatly I cannot find the right files to do that. Where are the definitions that contain the mappings from sysObjectID to the right OS and MIBS?

1 0

Support for Dell Storage (Compellent)
by Thomas Stather 31 Oct '18

31 Oct '18

Hi I am using the professional edition of Observium and was wondering, if it supports Dell storage arrays. I am particularly interested in the Dell Compellent series as i have 2 of them in production. I have the official Dell MIBS ()MIB2014.01.29) and im willing to help if not implemented. Thanks in advance :) Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221-486 628 Fax: +49 6221-486 561 ------------------------------------------------------------------------ Max Planck Institute for Medical Research (MPImF) Jahnstrasse 29, 69120 Heidelberg Germany

2 1

Re: [Observium] Performance Issue - High CPU with 'mysqld'?
by Gordon Cheng (gocheng) 31 Oct '18

31 Oct '18

Thanks all. Yes, it's a new set up and a lot of new devices were added about 4 weeks ago. An update here. We just have the number of Cores increased from 4 to 16, and looks like there has been improvement in terms of performance now. But there is a new issue observed. Quite frequently (~1 out of 4 times), Observium is responding HTTP response code 500 with blank page when logging in, or when clicking around after login. Any thoughts or suggestions on this? Here are the logs when it happens: /opt/observium/logs/access_log: 171.68.241.12 - - [30/Oct/2018:21:29:53 -0700] "GET / HTTP/1.1" 500 1728 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.13; rv:63.0) Gecko/20100101 Firefox/63.0" /opt/observium/logs/error_log: [Tue Oct 30 21:29:54.329931 2018] [:error] [pid 21511] [client 171.68.241.12:54771] PHP Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 135168 bytes) in /opt/observium/includes/db/mysqli.inc.php on line 316 [cid:image001.png@01D47099.AD6D0FA0] Thanks. - Gordon From: observium <observium-bounces(a)observium.org> on behalf of Mike Stupalov via observium <observium(a)observium.org> Reply-To: Observium <observium(a)observium.org> Date: Sunday, October 28, 2018 at 4:09 AM To: Observium <observium(a)observium.org> Cc: Mike Stupalov <mike(a)observium.org> Subject: Re: [Observium] Performance Issue - High CPU with 'mysqld'? Simon Mousey Smith via observium wrote on 27/10/2018 23:55: Hi Gordon I think from what I can see from the pics, the 3rd graph along, bottom row It looks like about 3-4 weeks ago its JUMPED UP in the wrapper processing times which means its taking too long to execute on each device or the main server As I see, 4 weeks ago added many new devices. It's not should be big trouble, but seems as need more optimizations, like: - use rrdcached - switch to SSD disks for such number of devices - RRDs and DB must use faster disks, SSD is mandatory for you. Did you change any configs then? Any updates to hardware, software, etc? Have u also tried the latest stable ? 9472 Have u also tried doing /opt/observium/poller.php -h gz-core01 -dd to see where it might be getting stuck? Regards Simon On 26 Oct 2018, at 03:15, Gordon Cheng (gocheng) via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: Thanks Adam. Our pollerlog pages are below. Should we still try to disable fdb-table as suggested? If so, any docs we can follow to disable it? Any other thoughts or suggestions? Thanks. - Gordon <image001.png> <image002.png> <image003.png> From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Adam Armstrong via observium <observium(a)observium.org<mailto:observium@observium.org>> Reply-To: Observium <observium(a)observium.org<mailto:observium@observium.org>> Date: Tuesday, October 23, 2018 at 12:50 PM To: Chris Neam via observium <observium(a)observium.org<mailto:observium@observium.org>> Cc: Adam Armstrong <adama(a)memetic.org<mailto:adama@memetic.org>> Subject: Re: [Observium] Performance Issue - High CPU with 'mysqld'? Hi, You probably (definitely) need more cores and/or more I/O throughput capacity. It's likely that you have multiple overlapping poller_wrapper processes running because they can't finish quickly enough. what do the graphs on this page look like? http://dev.observium.org/pollerlog/ and what are the slowest devices on this : http://dev.observium.org/pollerlog/view=devices/ You may be able to disable a module or two you don't care about that's taking time : http://dev.observium.org/pollerlog/view=modules/ fdb-table is usually a good candidate. adam. On 2018-10-23 19:54:32, Gordon Cheng (gocheng) via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: Hi all, I have a new Observium setup (verion 18.9.9428 (9th September 2018)) with the following VM spec: Cores 4 Memory 64GB HD 500GB CentOS 7 PHP 7.0.31 MySQL 5.5.60-MariaDB and with the following network devices to be monitored: Devices - 634 (total), 597 (up), 37 (down) Ports - 58,032 (total), 27,664 (up), 19,967 (down) Sensors - 47,639 (total), 43,243 (ok), 4,396 (down) Statuses - 5,880 (total), 5,854 (ok), 10 (alert) --- Issue is that we are frequently seeing the following error when connecting on GUI/CLI, with slow response time on GUI/CLI: DB Error 1040: Too many connections And we are seeing gaps (broken graphs) like the following: [cid:image001.png@01D46AC5.2F7A6900] We have tried to bump up the number of 'max_connections' from original 151 to 500 and then 200, but it didn't help: sjc-observium-1:/etc# grep max_conn my.cnf max_connections=200 sjc-observium-1:/etc# And it's observed that the CPU load is heavy with 'mysqld': top - 09:36:17 up 35 days, 18:54, 2 users, load average: 74.18, 89.49, 82.67 Tasks: 665 total, 79 running, 586 sleeping, 0 stopped, 0 zombie %Cpu(s): 62.9 us, 36.9 sy, 0.0 ni, 0.0 id, 0.0 wa, 0.0 hi, 0.2 si, 0.0 st KiB Mem : 65810376 total, 2511836 free, 5989292 used, 57309248 buff/cache KiB Swap: 4193020 total, 4141016 free, 52004 used. 59172312 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 5152 mysql 20 0 2749132 664216<tel:0%202749132%20664216> 9164 S 20.7 1.0 4058:17 mysqld 31879 root 20 0 419676 27564 8264 R 4.2 0.0 0:00.13 php 31769 root 20 0 417212 25532 8336 S 3.6 0.0 0:00.12 php 31933 root 20 0 416868 25116 8148 S 3.2 0.0 0:00.10 php 31935 root 20 0 416736 24700 7832 S 3.2 0.0 0:00.10 php <snip> My 'config.php' is pretty much with default values. --- I'm new to Observium. It'd be greatly appreciated if someone can shed some light how it can be resolved. Thanks. - Gordon _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

2 1

Observium PRO - Last Update
by Serghei Golipad 30 Oct '18

30 Oct '18

Guys, has anyone updated to latest rolling? Now getting the following: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator at [no address given] to inform them of the time this error occurred, and the actions you performed just before this error. More information about this error may be available in the server error log. PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

2 1

Performance Issue - High CPU with 'mysqld'?
by Gordon Cheng (gocheng) 26 Oct '18

26 Oct '18

Hi all, I have a new Observium setup (verion 18.9.9428 (9th September 2018)) with the following VM spec: Cores 4 Memory 64GB HD 500GB CentOS 7 PHP 7.0.31 MySQL 5.5.60-MariaDB and with the following network devices to be monitored: Devices - 634 (total), 597 (up), 37 (down) Ports - 58,032 (total), 27,664 (up), 19,967 (down) Sensors - 47,639 (total), 43,243 (ok), 4,396 (down) Statuses - 5,880 (total), 5,854 (ok), 10 (alert) --- Issue is that we are frequently seeing the following error when connecting on GUI/CLI, with slow response time on GUI/CLI: DB Error 1040: Too many connections And we are seeing gaps (broken graphs) like the following: [cid:image001.png@01D46AC5.2F7A6900] We have tried to bump up the number of 'max_connections' from original 151 to 500 and then 200, but it didn't help: sjc-observium-1:/etc# grep max_conn my.cnf max_connections=200 sjc-observium-1:/etc# And it's observed that the CPU load is heavy with 'mysqld': top - 09:36:17 up 35 days, 18:54, 2 users, load average: 74.18, 89.49, 82.67 Tasks: 665 total, 79 running, 586 sleeping, 0 stopped, 0 zombie %Cpu(s): 62.9 us, 36.9 sy, 0.0 ni, 0.0 id, 0.0 wa, 0.0 hi, 0.2 si, 0.0 st KiB Mem : 65810376 total, 2511836 free, 5989292 used, 57309248 buff/cache KiB Swap: 4193020 total, 4141016 free, 52004 used. 59172312 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 5152 mysql 20 0 2749132 664216 9164 S 20.7 1.0 4058:17 mysqld 31879 root 20 0 419676 27564 8264 R 4.2 0.0 0:00.13 php 31769 root 20 0 417212 25532 8336 S 3.6 0.0 0:00.12 php 31933 root 20 0 416868 25116 8148 S 3.2 0.0 0:00.10 php 31935 root 20 0 416736 24700 7832 S 3.2 0.0 0:00.10 php <snip> My 'config.php' is pretty much with default values. --- I'm new to Observium. It'd be greatly appreciated if someone can shed some light how it can be resolved. Thanks. - Gordon

2 2

DB and Polling issues after upgrading to r9505
by Christopher Smith 25 Oct '18

25 Oct '18

We had many devices not set to the correct location due to https://jira.observium.org/browse/OBS-2767 Updated to r9505 and after doing so we reset the geo location via web interface (device properties -> Geolocation -> Reset GEO location) On any device that this was done to it seems like they do not exist to the poller any longer, none have been polled since the above action was taken. I based this info from the Per Device stats in the Pollerlog section (all of the devices that had their geo location reset were last polled 5+ hours ago, everything else that was not touched are being polled as expected every 5 minutes) I see these errors in the db.log file, they appear to have shown up when the Reset GEO location operation was done on each device: [2018/10/24 14:48:43 -0400] index.php(4115): Failed dbQuery (#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near 'WHERE `location_id` = ?' at line 1), Query: UPDATE `devices_locations` set WHERE `location_id` = ? [2018/10/24 14:49:44 -0400] index.php(9439): Failed dbQuery (#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near 'WHERE `location_id` = ?' at line 1), Query: UPDATE `devices_locations` set WHERE `location_id` = ? [2018/10/24 14:50:23 -0400] index.php(9439): Failed dbQuery (#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near 'WHERE `location_id` = ?' at line 1), Query: UPDATE `devices_locations` set WHERE `location_id` = ? [2018/10/24 14:50:57 -0400] index.php(44932): Failed dbQuery (#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near 'WHERE `location_id` = ?' at line 1), Query: UPDATE `devices_locations` set WHERE `location_id` = ? [2018/10/24 14:51:28 -0400] index.php(25685): Failed dbQuery (#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near 'WHERE `location_id` = ?' at line 1), Query: UPDATE `devices_locations` set WHERE `location_id` = ? [2018/10/24 14:52:29 -0400] index.php(25888): Failed dbQuery (#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near 'WHERE `location_id` = ?' at line 1), Query: UPDATE `devices_locations` set WHERE `location_id` = ? Observium system info: Observium 18.10.9505 (24th October 2018) OS Linux 3.10.0-862.3.3.el7.x86_64 [amd64] (CentOS 7) Apache 2.4.6 (CentOS) OpenSSL/1.0.2k-fips PHP/7.0.31 PHP 7.0.31 (OPcache: ENABLED) Python 2.7.5 MySQL 5.5.56-MariaDB (extension: mysqli 5.5.56-MariaDB) SNMP NET-SNMP 5.7.2 RRDtool 1.6.0 Fping 3.10 (IPv4 only)

2 2

Update - Port descripton changed ( possible bug or ... )
by Sigurður Hannesson 23 Oct '18

23 Oct '18

Hi, just updated Version Information Observium 18.10.9472 (16th October 2018) OS Linux 4.9.0-3-amd64 [amd64] (Debian 9.1) Apache 2.4.25 (Debian) PHP 7.0.19-1 (OPcache: ENABLED) Python 2.7.13 MySQL 10.1.23-MariaDB-9+deb9u1 (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.6.0 Fping 3.15 (IPv4 and IPv6) . Noticed that most of my port groups had 0 ports in them. Looking at the port description they had changed deviceA 1/1/3<http://172.24.41.34/device/device=31/tab=port/port=5230/> \AKRA-3 No1\ instead of AKRA-3 No1 this of course means that all my port groups are not matching the criteria. br., SH

1 0

Redundancy Mode (C2900)
by Robert Williams 22 Oct '18

22 Oct '18

Hi, We've had a few customer devices generate alerts overnight for 'Operational Redundancy Mode' = nonRedundant Example below: It appears to be a newly detected element during a discovery run - but in all (of our) scenarios it is now in alarm as the customers do not have them operating in redundancy mode. As far as I can tell it's not configured at all on them. Obviously I can filter them out from the alert ("Customer - Status Alert") but it would be nice if I could hide them from the main pages (or stop it from being polled at all). Alternatively, does anyone know what element in our device config may be triggering this to show up, so that I can modify the configs to remove it? Thanks! Robert Williams Custodian Data Centres https://www.CustodianDC.com

3 3

Alert Checker for Printer Toner
by Walter Onda 20 Oct '18

20 Oct '18

Hello I spent a long time to make a toner alert when it arrive lower than 2 %, it doesn't matter which color. Is this condition correct? Because some of this printer has just 1% but it shown as "ok". Has maybe somebody an suggestion? Regards and have a nice weekend Walter

2 3

Discovering storage again - every time discovery is run
by Niklas Larsson 18 Oct '18

18 Oct '18

Hi, after r9479 (ish) we get this in the log every time discovery is running: Attached log from: ./discovery.php -d -h gluster02.example.com -m storage storage module is creating the logging. /niklas

3 10

Distinct alerting when several custom OID on the same device
by Thibault Richard 17 Oct '18

17 Oct '18

Hello, I've finally succeed to create alerting on custom OID Unfortunately, I'm now facing another issue I've one device with 2 custom OIDs * The device called "depanne" have 2 custom OID named "mailnotsent" and "checkdbconnection" I 've created one alert with this basic condition Currently if one of the 2 OID got a different value than 0, I receive the alert message "checkdbconnections fails" which correspond to the message I've defined It's OK when "checkdbconnections" fails but not when "mailnotsent' fails In other words, if the OID value for "mailnotsent" is not 0, I'm receiving a non-related message. I would like to create one alert related to one OID As checker condition for a custom OID I can only use a metric and the only available metric is the OID value. I know I cannot filter on the condition So I'm trying to filter thanks to the "association" In the previous version (which is still the documented one) it was possible to specify a device and an entity But as the current version no longer propose us a free field for this, I've tried to filter with several solution like this one It unfortunately doesn't work. How could I specify an alert is only linked to one OID ? Best Regards Thibault

2 7

MIB for FS.COM switches
by Pieter Meyer 16 Oct '18

16 Oct '18

Hi guys How can we add better support for switches from FS.COM Regards Pieter Meyer Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: +27 83 233 6614 <https://goo.gl/maps/WHe3soT1fHm> map | <http://www.convergedgroup.net/> website | <http://www.convergedgroup.net/blog/> company blog | <http://www.linkedin.com/company/converged-telecoms> linkedin CAUTION: This email and any attachments may contain information that is confidential and subject to legal privilege. If you are not the intended recipient, you must not read, use, disseminate, distribute or copy this email or any attachments. If you have received this email in error, please notify us immediately and erase this email and any attachments. Thank you. DISCLAIMER: To the maximum extent permitted by law, Converged Group is not liable (including in respect of negligence) for viruses or other defects or for changes made to this email or to any attachments. Before opening or using attachments, check them for viruses and other defects. The information contained in this document is confidential to the addressee and is not the view nor the official policy of Converged Group unless otherwise stated.

2 1

Stormshield firewalls log
by Luca Sasdelli 16 Oct '18

16 Oct '18

Hello all, we've several Stormshield firewall (FreeBSD-based) to monitor with Observium; most of them send their syslog properly, but with three of them, the syslogs are correctly received on observium server (seen with tcpdump), but not displayed within the respective entries. The hostnames does match the ones used with the device names. The Syslog setup allows unknown host. The syslog messages filters doesn't match any possible string in the incoming logs on mentioned devices. By enabling syslog debug, the observium log writes the correspondent files successfully. What else should I check for this issue? Rev. 18.10.9470 Thanks! Luca

3 4

Citrix Netscaler 12.x
by Adam Armstrong 15 Oct '18

15 Oct '18

Hi Guys, Citrix seem to have broken SNMP in Netscaler 12.x. Best not to try those versions for now if you value your data collection. Adam. ⁣Sent from BlueMail

3 3

RANCiD version labels
by Eric W. Bates 14 Oct '18

14 Oct '18

Just finished adding RANCiD configs to observium and it's quite slick. Thanks for doing that. When displaying config versions, observium uses the git'ish 7-char truncations of the full hash to label those versions. While the time stamps are viewable when hovering the mouse over those links, most of my network team are non-coders and are put off by hex strings (never heard of git). Is there a knob I can tweak in config.php to just change those labels to the time stamp instead? Thanks for your time. -- Clark 159a, MS 46 508/289-3112

1 0

pdf.php
by David Jesus Maturano Sanchez 13 Oct '18

13 Oct '18

Testing this file, I see this message: /opt/observium/html# php pdf.php PHP Fatal error: require_once(): Failed opening required 'includes/tcpdf/config/lang/eng.php' (include_path='/opt/observium/libs/pear:/opt/observium/libs:.:/usr/share/php') in /opt/observium/html/pdf.php on line 27 What do I need to run this? Rergards David.

2 1

Change e-mail address at jira.observium.org
by xomka686 13 Oct '18

13 Oct '18

Hi, I want to change an e-mail used in my account at jira.observium.org, but User Profile page in Jira doesn't allow to do that (in fact, account Summary page is just empty). Can you advice me the right button for e-mail change? -- Best, Sergey

1 0

Observium in LXC Container
by mal＠platinumnetworks.com.au 13 Oct '18

13 Oct '18

Can I run a production Observium install inside a LXC container? Any known issues I should be aware of? Cheers Mal

3 3

n00b question: Implementing a new application but I get no graphs (rrd files)
by Jonas Karlsson 11 Oct '18

11 Oct '18

Hi, I am trying to develop a new application (monroe) by following the instructions here: https://docs.observium.org/developing/add_app/ and are probably doing something stupid but I cannot see where the problem is. In my, updated and working, installation of observium I cannot find the file "includes/definitions/rrdtypes.inc.php" referenced above (I have searched the entire folder tree but with no luck). All the default applications work (ie vmwaretools) so as a "alternative approach" I tried to copy the code of the vmwaretools application and also search for where the vmwaretools have its definition but no luck. My application show up in the WEB UI and the agent works but I get no graphs. When I run ./poller.php manually I get : <snip> ##### Module Start: applications ##### o Applications ioping ...monroe .Cannot create RRD for type monroe - not found in definitions! nginx . nginx statistics vmwaretools . o Module time 0.0247s <snip> So it is missing the definitions but where do I add those ??? I have found a reference for rrdtypes.inc.php in includes/definitions.inc.php but in /includes/definitions/ I only have three files: $ls includes/definitions/ definitions.dat version.inc.php wui.inc.php -- Jonas Karlsson Senior Research Engineer Karlstad University SE-651 88 Karlstad, Sweden 📞 +46 54 700 15 64 📞 +46 70 672 06 20 💬 karlsson.karl.jonas 🗝 0x88765911B284F3A6

3 4

Use ifName instead of IfDescr
by Simon Mousey Smith 10 Oct '18

10 Oct '18

Hi All Im trying to find out if its possible to use IfName instead of ifDescr? TP-Link TL-SG3109 switch For some DUMB reason, all the ifDescr are being discovered as ‘Ethernet Interface’ ifDescr.1 = Ethernet Interface ifDescr.2 = Ethernet Interface ifDescr.3 = Ethernet Interface ifDescr.4 = Ethernet Interface ifDescr.5 = Ethernet Interface ifDescr.6 = Ethernet Interface ifDescr.7 = Ethernet Interface ifDescr.8 = Ethernet Interface ifDescr.9 = Ethernet Interface So when you look down the list on Observium, I have 9 Ethernet Interface (not helpful) I can put descriptions on each port and they get discovered by observium and show underneath the Ethernet Interface (but still not very helpful) I have noticed however tho in the debug output of the poller, ifName are being found as the port numbers as listed on the web interface of the switch! ifName.1 = g1 ifName.2 = g2 ifName.3 = g3 ifName.4 = g4 ifName.5 = g5 ifName.6 = g6 ifName.7 = g7 ifName.8 = g8 ifName.9 = g9 So is it possible to switch them round? Attached is the debug output from the switch if its helpful to anyone :) Regards Simon

3 8

Limited write permissions
by Tom Funken 10 Oct '18

10 Oct '18

Hey Guys, I currently looking for a way to give an employee just "some" access to the system. The main goal is, that he can manage traffic bills but only can see an selected devices group. However, it seems like I'm to stupid for that :D When I create an normal user, I can assign an group to the user, but he just can look and don't edit bills. The only way I can see to give him rights, to create and edits bills is to give him a full admin level.... :( -- Best Regards, Tom Funken Managing Director ------------------------- Srizbi Limited 83 Ducie Street Manchester M1 2JQ United Kingdom Tel.: +44 56-0305 5120 E-Mail.: t.funken(a)srizbi.com

2 1

Submitting MIB's for including into Observium?
by Pieter De Wit 10 Oct '18

10 Oct '18

Hey Guys, What is the process for getting MIBs added to Observium ? (I know adding them to /mibs/ won't work :) ) Thanks ! Pieter

3 4

Re: [Observium] Alerting on custom OID
by Thibault Richard 09 Oct '18

09 Oct '18

Hello Chris, Thanks for your reply. Unfortunately I’ve no success with your proposal I’ve defined my custom OID like this I know it works because if the state change , I see it’s taken into account into Observium I’ve defined my Alert check like this : But it’s still doesn’t work ;-( Adam any tip to help me ? Best Regards Thibault De : Chris Tomkins <christ(a)brandwatch.com> Envoyé : mardi 9 octobre 2018 15:18 À : thibs(a)thibs.com Cc : Observium <observium(a)observium.org> Objet : Re: [Observium] Alerting on custom OID Hi Thibault, See attached, maybe it helps? This is a working setup. Chris On Tue, 9 Oct 2018 at 14:10, Thibault Richard via observium <observium(a)observium.org <mailto:observium@observium.org> > wrote: Hello, Could you please help me to achieve the alert checks I need I ‘ve defined the following custom OID The result ca only be O (means OK) or 1 (means KO) I want to be alerted when the value is 1 I’ve tried a lot of combination including the following : I know the solution is in the condition checker but I don’t know how to define the condition “if the OID value is XX” I’m completely lost Could you please help me ? Best Regards Thibault _______________________________________________ observium mailing list observium(a)observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Chris Tomkins Brandwatch | Senior Network Engineer (Linux/Network) christ(a)brandwatch.com <mailto:christ@brandwatch.com> | (+44) 01273 448 949 @Brandwatch New York | San Francisco | Brighton | Singapore | Berlin | Stuttgart <https://www.brandwatch.com/customer-success/> Discover how organizations are using Brandwatch to create their own success <http://www.brandwatch.com/email-disclaimer/> Email disclaimer <https://lh6.googleusercontent.com/hYprrBP_3HGBddLOgdQ20pgDf_F_7WTho_ILiPxoO…>

2 1

Alerting on custom OID
by Thibault Richard 09 Oct '18

09 Oct '18

Hello, Could you please help me to achieve the alert checks I need I ‘ve defined the following custom OID The result ca only be O (means OK) or 1 (means KO) I want to be alerted when the value is 1 I’ve tried a lot of combination including the following : I know the solution is in the condition checker but I don’t know how to define the condition “if the OID value is XX” I’m completely lost Could you please help me ? Best Regards Thibault

1 0

Stack Switch Alerts
by Zafar Pravaiz 08 Oct '18

08 Oct '18

Dear All, We have many Cisco Stacks, sometimes one of the switch in stack dies and we don’t get any alert. How can I set an alert if any of the stack member stop working or status change. I would highly appreciate your help. Thanks Zafar Pravaiz Senior Network Architect Information Technology Department Tel +971 6 515 2164 Fax +971 6 515 2112 American University of Sharjah PO Box 26666, Sharjah United Arab Emirates http://www.aus.edu <http://www.aus.edu/> zpravaiz(a)aus.edu <mailto:youremail@aus.edu>

3 5

Custom Dashboards
by John Morris 08 Oct '18

08 Oct '18

Hi All, I was wondering if any of you have managed to use the data from Observium to create a nice dashboard? Thanks John Morris Cloud Specialist

2 2

FW: FW: FW: Can't add Devices/Not polling
by mal＠platinumnetworks.com.au 08 Oct '18

08 Oct '18

From: Mal Evans Sent: Monday, 8 October 2018 12:12 PM To: 'Observium' <observium(a)observium.org> Subject: RE: [Observium] FW: FW: Can't add Devices/Not polling Cancel that – I restarted the snmpd service and everything started to work again… That’s for your help! From: observium <observium-bounces(a)observium.org <mailto:observium-bounces@observium.org> > On Behalf Of Mal via observium Sent: Monday, 8 October 2018 12:05 PM To: 'Observium' <observium(a)observium.org <mailto:observium@observium.org> > Cc: mal(a)platinumnetworks.com.au <mailto:mal@platinumnetworks.com.au> Subject: Re: [Observium] FW: FW: Can't add Devices/Not polling Thanks Adam – that will be the problem. Is snmpget install as part of the snmpd installation? Or from Observium? I had a problem with SNMP so I uninstalled and reinstalled last week but snmpget wasn’t installed as part of that process. Do I need to reinstall Observium perhaps? Mal From: observium <observium-bounces(a)observium.org <mailto:observium-bounces@observium.org> > On Behalf Of Adam Armstrong via observium Sent: Monday, 8 October 2018 8:58 AM To: Pieter De Wit via observium <observium(a)observium.org <mailto:observium@observium.org> > Cc: Adam Armstrong <adama(a)memetic.org <mailto:adama@memetic.org> > Subject: Re: [Observium] FW: FW: Can't add Devices/Not polling sh: 1: exec: /usr/bin/snmpget: not found You might need to fix this... 😅 Adam. Sent from BlueMail <http://www.bluemail.me/r?b=13688> On 7 Oct 2018, at 23:44, Mal via observium <observium(a)observium.org <mailto:observium@observium.org> > wrote: From: Mal Evans Sent: Monday, 8 October 2018 8:42 AM To: Observium <observium(a)observium.org> Subject: RE: [Observium] FW: Can't add Devices/Not polling Thanks Adam – output below mal@mon:/opt/observium$ sudo ./poller.php -h rtr-slf.qld.pnet.net.au -dd [sudo] password for mal: DEBUG! Load class 'Console_Color2' from '/opt/observium/libs/pear/Console/Color2.php': OK CMD[/usr/bin/svn info /opt/observium] CMD EXITCODE[0] CMD RUNTIME[0.0109s] STDOUT[ Path: . Working Copy Root Path: /opt/observium URL: http://svn.observium.org/svn/observium/trunk Relative URL: ^/observium/trunk Repository Root: http://svn.observium.org/svn Repository UUID: 61d68cd4-352d-0410-923a-c4978735b2b8 Revision: 9449 Node Kind: directory Schedule: normal Last Changed Author: mike Last Changed Rev: 9449 Last Changed Date: 2018-09-30 19:05:07 +1000 (Sun, 30 Sep 2018) ] SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema';] ROWS[1] SQL RUNTIME[0.00045204s] SQL[SELECT @@SESSION.sql_mode;] ROWS[1] SQL RUNTIME[0.00022888s] SQL[SET SESSION `sql_mode` = 'NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION'] ROWS[0] SQL RUNTIME[0.00021482s] DB mode(s) disabled: STRICT_TRANS_TABLES, ONLY_FULL_GROUP_BY SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'current_rev';] ROWS[1] SQL RUNTIME[0.00024605s] SQL[SELECT * FROM `config`] ROWS[15] SQL RUNTIME[0.00034213s] Load class 'Net_IPv6' from '/opt/observium/libs/pear/Net/IPv6.php': OK ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 18.9.9449 http://www.observium.org SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'latest_ver';] ROWS[1] SQL RUNTIME[0.00054002s] SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'latest_rev';] ROWS[1] SQL RUNTIME[0.00022697s] SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'latest_rev_date';] ROWS[1] SQL RUNTIME[0.00023413s] There is a newer revision of Observium available! CMD[date "+%:z"] Wrong process status! Issue in proc_get_status(), see: https://bugs.php.net/bug.php?id=69014 CMD EXITCODE[0] CMD RUNTIME[0.0025s] STDOUT[ +10:00 ] SQL[SELECT TIMEDIFF(NOW(), UTC_TIMESTAMP);] ROWS[1] SQL RUNTIME[0.00035596s] UNIXTIME from DATETIME "time()": LOCAL (2018-10-08 09:40:55), GMT (2018-10-07 22:40:55), TZ (+11:00) Version 18.10.9452 (8th October 2018) is 3 revisions ahead. CMD[/opt/observium/scripts/distro] CMD EXITCODE[0] CMD RUNTIME[0.0139s] STDOUT[ Linux|4.4.0-137-generic|amd64|Ubuntu|16.04|vmware| ] CMD[/usr/bin/env python --version 2>&1] CMD EXITCODE[0] CMD RUNTIME[0.0026s] STDOUT[ Python 2.7.12 ] SQL[SELECT version();] ROWS[1] SQL RUNTIME[0.00035000s] CMD[/usr/bin/rrdtool --version | head -n1] CMD EXITCODE[0] CMD RUNTIME[0.0083s] STDOUT[ RRDtool 1.5.5 Copyright by Tobias Oetiker <tobi(a)oetiker.ch <mailto:tobi@oetiker.ch> > ] CMD[/usr/bin/fping -v 2>&1] CMD EXITCODE[0] CMD RUNTIME[0.0019s] STDOUT[ /usr/bin/fping: Version 3.13 /usr/bin/fping: comments to david(a)schweikert.ch <mailto:david@schweikert.ch> ] CMD[/usr/sbin/apache2 -v | awk '/Server version:/ {print $3}'] CMD EXITCODE[0] CMD RUNTIME[0.0503s] STDOUT[ Apache/2.4.18 ] SQL[SELECT @@SESSION.sql_mode;] ROWS[1] SQL RUNTIME[0.00060105s] SQL[SHOW VARIABLES LIKE 'character_set_connection'] ROWS[1] SQL RUNTIME[0.01740503s] ##### Software versions ##### o OS Linux 4.4.0-137-generic [amd64] (Ubuntu 16.04) o Apache 2.4.18 o PHP 7.0.32-0ubuntu0.16.04.1 (OPcache: DISABLED) o Python 2.7.12 o MySQL 5.7.23-0ubuntu0.16.04.1 (extension: mysqli 5.0.12-dev) o SNMP not found o RRDtool 1.5.5 o Fping 3.13 (IPv4 and IPv6) ##### Memory Limit ##### o PHP Unlimited ##### MySQL mode ##### o MySQL NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION ##### Charset info ##### o PHP UTF-8 o MySQL utf8 ##### Timezones info ##### o Date Monday, 08-Oct-18 09:40:55 AEDT o PHP +11:00 o MySQL +10:00 SQL[SELECT * FROM `alerts_maint` WHERE `maint_start` < '1538952055' AND `maint_end` > '1538952055'] ROWS[0] SQL RUNTIME[0.00051713s] RRD PIPE OPEN[TRUE] ##### Starting polling run at 2018-10-08 09:40:55 ##### SQL[SELECT `device_id` FROM `devices` WHERE `disabled` = 0 AND `hostname` LIKE 'rtr-slf.qld.pnet.net.au' ORDER BY `device_id` ASC] ROWS[1] SQL RUNTIME[0.00057888s] SQL[SELECT * FROM `devices` WHERE `device_id` = '27'] ROWS[1] SQL RUNTIME[0.00041914s] SQL[SELECT * FROM `entity_attribs` WHERE `entity_type` = 'device' AND `entity_id` = '27'] ROWS[1] SQL RUNTIME[0.00042796s] > $device /opt/observium/includes/polling/functions.inc.php:483 array( [device_id] => string(2) "27" [hostname] => string(23) "rtr-slf.qld.pnet.net.au" [sysName] => string(11) "rtr-slf.qld" [snmp_community] => string(12) "PlatinumSNMP" [snmp_authlevel] => null [snmp_authname] => null [snmp_authpass] => null [snmp_authalgo] => null [snmp_cryptopass] => null [snmp_cryptoalgo] => null [snmp_version] => string(3) "v2c" [snmp_port] => string(5) "11164" [snmp_timeout] => null [snmp_retries] => null [snmp_maxrep] => null [ssh_port] => string(2) "22" [agent_version] => null [snmp_transport] => string(3) "udp" [bgpLocalAs] => null [snmpEngineID] => string(22) "800007DB03883FD32FDB21" [sysObjectID] => string(27) ".1.3.6.1.4.1.2011.2.224.133" [sysDescr] => string(176) "Huawei AR169FGW-L Huawei Versatile Routing Platform Software VRP (R) software,Version 5.160 (AR169FGW-L V200R007C00SPCb00) Copyright (C) 2011-2016 Huawei Technologies Co., Ltd" [sysContact] => string(17) "Platinum Networks" [version] => string(5) "5.160" [hardware] => string(0) "" [features] => string(17) "V200R007C00SPCb00" [location] => string(35) "Level 2, 217 George Street Brisbane" [os] => string(3) "vrp" [status] => string(1) "0" [ignore] => string(1) "0" [ignore_until] => null [asset_tag] => null [disabled] => string(1) "0" [uptime] => string(7) "6797935" [last_rebooted] => string(10) "1531299027" [force_discovery] => string(1) "0" [last_polled] => string(19) "2018-09-28 11:08:06" [last_discovered] => string(19) "2018-09-28 06:38:41" [last_alerter] => string(19) "2018-10-08 08:40:22" [last_polled_timetaken] => string(4) "3.23" [last_discovered_timetaken] => string(4) "7.75" [purpose] => null [type] => string(7) "network" [serial] => null [icon] => null [device_state] => string(13597) "a:4:{s:15:"poller_mod_perf";a:27:{s:6:"system";d:0.1202;s:2:"os";d:0.032599999999999997;s:7:"sensors";d:0.025700000000000001;s:6:"status";d:0.00080000000000000004;s:10:"processors";d:0.53269999999999995;s:8:"mempools";d:0.1133;s:7:"storage";d:0.00080000000000000004;s:8:"netstats";d:0.47199999999999998;s:6:"hr-mib";d:0.021999999999999999;s:7:"ucd-mib";d:0.050200000000000002;s:13:"ipSystemStats";d:0.090499999999999997;s:5:"ports";d:1.1046;s:9:"bgp-peers";d:0.021700000000000001;s:15:"printersupplies";d:0.00059999999999999995;s:10:"ucd-diskio";d:0.00059999999999999995;s:4:"wifi";d:0.0016000000000000001;s:10:"p2p-radios";d:0.0011000000000000001;s:4:"ospf";d:0.34749999999999998;s:3:"sla";d:0.0012999999999999999;s:11:"pseudowires";d:0.00080000000000000004;s:14:"mac-accounting";d:0.001;s:12:"loadbalancer";d:0.00069999999999999999;s:15:"entity-physical";d:0.00020000000000000001;s:12:"applications";d:0.00089999999999999998;s:9:"fdb-table";d:0.1444;s:6:"graphs";d:0.00089999999999999998;s:4:"oids";d:0.00089999999999999998;}s:17:"poller_ports_perf";a:1:{s:4:"vlan";d:0.1332399845123291;}s:14:"poller_history";a:288:{i:1538096883;d:3.2341000000000002;i:1538096606;d:6.7492000000000001;i:1538096310;d:3.9961000000000002;i:1538095996;d:3.0249999999999999;i:1538095685;d:3.5903999999999998;i:1538095413;d:3.5851999999999999;i:1538095143;d:3.3856999999999999;i:1538094834;d:3.5752000000000002;i:1538094527;d:3.0781000000000001;i:1538094164;d:3.1539999999999999;i:1538093911;d:4.3428000000000004;i:1538093642;d:3.6230000000000002;i:1538093386;d:3.0167999999999999;i:1538093108;d:4.5301999999999998;i:1538092703;d:2.9601000000000002;i:1538092374;d:3.3117999999999999;i:1538092107;d:3.7368999999999999;i:1538091750;d:2.9855;i:1538091527;d:4.3973000000000004;i:1538091201;d:3.0099999999999998;i:1538090865;d:3.0404;i:1538090624;d:3.4723999999999999;i:1538090317;d:2.9470999999999998;i:1538090040;d:3.1560000000000001;i:1538089693;d:3.6059000000000001;i:1538089357;d:4.6970999999999998;i:1538089111;d:4.0666000000000002;i:1538088809;d:2.9973000000000001;i:1538088453;d:2.9653;i:1538088212;d:3.7945000000000002;i:1538087929;d:3.1436999999999999;i:1538087611;d:3.0897999999999999;i:1538087314;d:3.3374999999999999;i:1538087020;d:2.9289999999999998;i:1538086665;d:2.9698000000000002;i:1538086356;d:3.8460000000000001;i:1538086091;d:4.3402000000000003;i:1538085783;d:4.4097;i:1538085495;d:3.8618999999999999;i:1538085118;d:3.0468000000000002;i:1538084881;d:4.6494999999999997;i:1538084540;d:3.2532000000000001;i:1538084291;d:4.0883000000000003;i:1538083954;d:4.2942;i:1538083707;d:4.2523;i:1538083342;d:2.9864999999999999;i:1538083078;d:3.9192999999999998;i:1538082761;d:3.2778;i:1538082483;d:3.7212999999999998;i:1538082237;d:4.2850999999999999;i:1538081883;d:2.9203000000000001;i:1538081573;d:3.2700999999999998;i:1538081310;d:3.4830000000000001;i:1538080940;d:2.9014000000000002;i:1538080726;d:4.0275999999999996;i:1538080333;d:2.9708999999999999;i:1538080081;d:4.9927000000000001;i:1538079773;d:3.4756;i:1538079454;d:3.5095999999999998;i:1538079143;d:3.6776;i:1538078914;d:3.7774999999999999;i:1538078587;d:4.0484999999999998;i:1538078215;d:3.8601000000000001;i:1538077961;d:4.6565000000000003;i:1538077645;d:3.7262;i:1538077339;d:3.8149000000000002;i:1538077130;d:4.0946999999999996;i:1538076783;d:2.9457;i:1538076499;d:3.6440000000000001;i:1538076176;d:2.9975999999999998;i:1538075873;d:3.4704999999999999;i:1538075515;d:3.3658999999999999;i:1538075299;d:3.8454000000000002;i:1538074988;d:3.0110000000000001;i:1538074668;d:3.5687000000000002;i:1538074343;d:3.6577000000000002;i:1538074043;d:3.9218000000000002;i:1538073762;d:3.9792999999999998;i:1538073522;d:3.5383;i:1538073171;d:3.6278000000000001;i:1538072836;d:3.6461000000000001;i:1538072583;d:4.0179;i:1538072220;d:3.1810999999999998;i:1538071957;d:4.7098000000000004;i:1538071675;d:3.4262000000000001;i:1538071445;d:4.7660999999999998;i:1538071077;d:3.0270000000000001;i:1538070751;d:3.3416999999999999;i:1538070424;d:3.6038999999999999;i:1538070136;d:4.0270999999999999;i:1538069867;d:4.1707999999999998;i:1538069633;d:4.6867999999999999;i:1538069229;d:2.9845000000000002;i:1538068985;d:4.1532999999999998;i:1538068673;d:3.1450999999999998;i:1538068387;d:3.6192000000000002;i:1538068066;d:3.3205;i:1538067737;d:5.0822000000000003;i:1538067474;d:3.9601999999999999;i:1538067121;d:3.0867;i:1538066864;d:4.3624000000000001;i:1538066538;d:3.3744000000000001;i:1538066280;d:4.2998000000000003;i:1538065956;d:4.5049999999999999;i:1538065620;d:4.4577;i:1538065367;d:5.4419000000000004;i:1538065086;d:3.5419999999999998;i:1538064789;d:3.3999999999999999;i:1538064514;d:3.9824000000000002;i:1538064183;d:4.5289999999999999;i:1538063877;d:3.8613;i:1538063551;d:3.3601999999999999;i:1538063274;d:3.4397000000000002;i:1538063006;d:3.194;i:1538062653;d:2.9878;i:1538062370;d:5.0301;i:1538062055;d:3.7035999999999998;i:1538061802;d:3.7561;i:1538061441;d:2.9472999999999998;i:1538061176;d:3.875;i:1538060917;d:3.5076999999999998;i:1538060615;d:3.6699999999999999;i:1538060222;d:3.5133999999999999;i:1538059976;d:4.4635999999999996;i:1538059647;d:3.7187999999999999;i:1538059364;d:4.0709;i:1538059050;d:3.6208999999999998;i:1538058753;d:4.5639000000000003;i:1538058450;d:3.7237;i:1538058178;d:3.6589;i:1538057838;d:3.3045;i:1538057555;d:4.1040000000000001;i:1538057334;d:3.5853000000000002;i:1538056972;d:2.9386999999999999;i:1538056653;d:3.7282999999999999;i:1538056371;d:3.8065000000000002;i:1538056114;d:3.5325000000000002;i:1538055780;d:3.0958000000000001;i:1538055450;d:3.3837000000000002;i:1538055232;d:5.6223999999999998;i:1538054868;d:3.1514000000000002;i:1538054534;d:3.9215;i:1538054284;d:4.5631000000000004;i:1538053995;d:3.4510999999999998;i:1538053662;d:3.2890000000000001;i:1538053379;d:4.8674999999999997;i:1538053080;d:3.8666999999999998;i:1538052750;d:2.9807000000000001;i:1538052479;d:3.6278999999999999;i:1538052131;d:3.1842000000000001;i:1538051868;d:4.3533999999999997;i:1538051588;d:4.8170000000000002;i:1538051267;d:3.5983999999999998;i:1538050956;d:3.4679000000000002;i:1538050679;d:3.7153999999999998;i:1538050374;d:3.6473;i:1538050134;d:3.5888;i:1538049629;d:2.9708000000000001;i:1538049460;d:8.1469000000000005;i:1538049168;d:3.5356999999999998;i:1538048845;d:3.3631000000000002;i:1538048538;d:3.7006999999999999;i:1538048337;d:4.4008000000000003;i:1538048044;d:2.9864000000000002;i:1538047702;d:2.9557000000000002;i:1538047347;d:2.9910000000000001;i:1538047108;d:3.9708999999999999;i:1538046789;d:3.0678000000000001;i:1538046496;d:3.403;i:1538046206;d:4.0400999999999998;i:1538045851;d:3.4628000000000001;i:1538045625;d:4.0418000000000003;i:1538045239;d:2.9009;i:1538044977;d:4.0365000000000002;i:1538044723;d:3.5535000000000001;i:1538044339;d:3.4213;i:1538044062;d:4.3501000000000003;i:1538043803;d:3.8041999999999998;i:1538043510;d:3.0160999999999998;i:1538043150;d:3.0059;i:1538042898;d:3.8214999999999999;i:1538042637;d:4.0918999999999999;i:1538042235;d:2.9893999999999998;i:1538041975;d:4.2956000000000003;i:1538041625;d:3.6320999999999999;i:1538041358;d:4.6371000000000002;i:1538041101;d:4.0105000000000004;i:1538040728;d:4.0038999999999998;i:1538040462;d:4.2099000000000002;i:1538040172;d:3.5746000000000002;i:1538039896;d:3.8418999999999999;i:1538039585;d:3.0783;i:1538039305;d:3.5063;i:1538039039;d:4.0595999999999997;i:1538038639;d:3.1524000000000001;i:1538038355;d:3.8142999999999998;i:1538038083;d:3.8182;i:1538037803;d:3.3988;i:1538037458;d:3.2178;i:1538037175;d:5.2276999999999996;i:1538036910;d:3.9146000000000001;i:1538036585;d:3.056;i:1538036291;d:3.4742000000000002;i:1538035934;d:3.1968999999999999;i:1538035692;d:4.5255999999999998;i:1538035415;d:4.7695999999999996;i:1538035042;d:3.5865999999999998;i:1538034727;d:4.1601999999999997;i:1538034391;d:4.0175999999999998;i:1538034179;d:5.5098000000000003;i:1538033873;d:3.5552999999999999;i:1538033619;d:4.6352000000000002;i:1538033311;d:3.0676999999999999;i:1538032925;d:2.9419;i:1538032673;d:5.1768000000000001;i:1538032408;d:3.3380000000000001;i:1538032066;d:3.0813999999999999;i:1538031831;d:5.1436999999999999;i:1538031518;d:3.1482000000000001;i:1538031214;d:2.9502999999999999;i:1538030925;d:3.1301999999999999;i:1538030587;d:3.1027999999999998;i:1538030254;d:3.6613000000000002;i:1538030088;d:5.9353999999999996;i:1538029651;d:2.9712999999999998;i:1538029430;d:4.0724;i:1538029073;d:3.0114000000000001;i:1538028819;d:4.0864000000000003;i:1538028468;d:3.4072;i:1538028258;d:5.2679999999999998;i:1538027875;d:3.3982999999999999;i:1538027627;d:3.9584999999999999;i:1538027296;d:3.0360999999999998;i:1538027016;d:3.4028999999999998;i:1538026754;d:3.391;i:1538026401;d:3.1278000000000001;i:1538026105;d:3.7959999999999998;i:1538025813;d:3.3414999999999999;i:1538025500;d:3.3069999999999999;i:1538025155;d:3.6038000000000001;i:1538024913;d:4.1936999999999998;i:1538024597;d:4.3296999999999999;i:1538024315;d:3.8589000000000002;i:1538024042;d:3.1970000000000001;i:1538023720;d:2.9822000000000002;i:1538023352;d:3.0276999999999998;i:1538023091;d:4.4111000000000002;i:1538022808;d:5.0712000000000002;i:1538022521;d:3.5150999999999999;i:1538022167;d:3.1518999999999999;i:1538021889;d:3.9045000000000001;i:1538021656;d:3.9718;i:1538021344;d:2.9900000000000002;i:1538021075;d:3.0324;i:1538020728;d:2.9912000000000001;i:1538020414;d:3.0663999999999998;i:1538020108;d:3.4420999999999999;i:1538019840;d:3.4765999999999999;i:1538019573;d:3.0379999999999998;i:1538019168;d:3.0318999999999998;i:1538018911;d:4.5292000000000003;i:1538018588;d:3.0362;i:1538018341;d:4.3705999999999996;i:1538018050;d:3.5909;i:1538017791;d:3.3767999999999998;i:1538017469;d:3.1556000000000002;i:1538017132;d:3.6358000000000001;i:1538016726;d:3.0318999999999998;i:1538016476;d:5.6369999999999996;i:1538016179;d:4.0448000000000004;i:1538015854;d:4.3811999999999998;i:1538015659;d:5.8514999999999997;i:1538015337;d:3.2549000000000001;i:1538014985;d:3.2122000000000002;i:1538014676;d:4.0532000000000004;i:1538014510;d:3.1556999999999999;i:1538014204;d:4.3333000000000004;i:1538013922;d:3.1497000000000002;i:1538013497;d:3.0994999999999999;i:1538013181;d:3.8603999999999998;i:1538012934;d:3.9632999999999998;i:1538012655;d:3.1371000000000002;i:1538012311;d:3.3313000000000001;i:1538011999;d:4.8042999999999996;i:1538011743;d:4.4160000000000004;i:1538011403;d:3.0274000000000001;i:1538011100;d:3.7353000000000001;i:1538010818;d:3.4683999999999999;}s:17:"discovery_history";a:100:{i:1538080714;d:7.7544000000000004;i:1538058954;d:11.8148;i:1538037386;d:7.1657000000000002;i:1538015811;d:7.5838000000000001;i:1537994199;d:7.1746999999999996;i:1537972672;d:7.6186999999999996;i:1537951026;d:9.1906999999999996;i:1537929401;d:8.9390999999999998;i:1537907760;d:6.9756;i:1537886184;d:7.3825000000000003;i:1537864597;d:7.3075000000000001;i:1537843033;d:7.3891;i:1537821394;d:7.5202;i:1537799799;d:7.7005999999999997;i:1537778194;d:8.4852000000000007;i:1537756660;d:8.7713999999999999;i:1537735006;d:7.5862999999999996;i:1537713387;d:8.0109999999999992;i:1537691787;d:7.3535000000000004;i:1537670226;d:7.6965000000000003;i:1537648609;d:8.2081;i:1537626998;d:7.4366000000000003;i:1537605387;d:7.7065999999999999;i:1537583780;d:7.5105000000000004;i:1537562202;d:7.5899000000000001;i:1537540589;d:7.6036000000000001;i:1537518999;d:7.3528000000000002;i:1537497396;d:7.9557000000000002;i:1537475839;d:7.3705999999999996;i:1537454188;d:8.5061999999999998;i:1537432601;d:7.3613;i:1537411004;d:8.2899999999999991;i:1537389392;d:7.4923999999999999;i:1537367772;d:7.7808999999999999;i:1537346241;d:6.9629000000000003;i:1537324683;d:9.3427000000000007;i:1537303013;d:8.5792999999999999;i:1537281409;d:7.9107000000000003;i:1537259778;d:7.6986999999999997;i:1537238203;d:7.5811999999999999;i:1537216594;d:7.4325000000000001;i:1537194987;d:7.5598999999999998;i:1537173376;d:7.1814999999999998;i:1537151822;d:7.3376000000000001;i:1537130177;d:7.5002000000000004;i:1537108585;d:7.2328000000000001;i:1537086974;d:7.5750000000000002;i:1537065377;d:7.2988;i:1537043762;d:7.2800000000000002;i:1537022166;d:7.0979999999999999;i:1537000580;d:7.3391000000000002;i:1536978980;d:7.3795999999999999;i:1536957427;d:7.5382999999999996;i:1536935803;d:8.4991000000000003;i:1536914176;d:7.6386000000000003;i:1536892643;d:7.4509999999999996;i:1536870967;d:7.2976999999999999;i:1536849371;d:7.3731999999999998;i:1536827784;d:7.5589000000000004;i:1536806192;d:7.3960999999999997;i:1536784576;d:7.2220000000000004;i:1536762955;d:7.2169999999999996;i:1536741335;d:6.8833000000000002;i:1536719833;d:7.1026999999999996;i:1536698172;d:7.4108000000000001;i:1536676570;d:7.4114000000000004;i:1536654965;d:7.3682999999999996;i:1536633387;d:7.3731999999999998;i:1536611750;d:7.024;i:1536590174;d:6.8372999999999999;i:1536568541;d:6.9978999999999996;i:1536546983;d:7.0103999999999997;i:1536525376;d:6.8952;i:1536503781;d:7.1639999999999997;i:1536482166;d:7.2619999999999996;i:1536460579;d:6.9081000000000001;i:1536438996;d:7.0580999999999996;i:1536417384;d:7.3914;i:1536395788;d:7.3792;i:1536374186;d:7.5015000000000001;i:1536352570;d:7.0444000000000004;i:1536330988;d:7.1060999999999996;i:1536309359;d:7.4617000000000004;i:1536287808;d:6.9250999999999996;i:1536266167;d:6.8148;i:1536244568;d:6.7591999999999999;i:1536222980;d:7.0377000000000001;i:1536201409;d:6.9621000000000004;i:1536179768;d:7.9686000000000003;i:1536158170;d:7.3461999999999996;i:1536136573;d:7.5946999999999996;i:1536115020;d:7.0101000000000004;i:1536093371;d:7.4097999999999997;i:1536071785;d:7.4455;i:1536050175;d:7.4588999999999999;i:1536028587;d:7.5102000000000002;i:1536006980;d:7.3712999999999997;i:1535985388;d:6.9196;i:1535963759;d:7.6353;i:1535942219;d:7.0571000000000002;}}" [distro] => null [distro_ver] => null [kernel] => null [arch] => null ) > $attribs /opt/observium/includes/polling/functions.inc.php:484 array( [ports_ignored_count] => string(1) "2" ) SQL[SELECT * FROM `observium_processes` WHERE `process_name` = 'poller.php' AND `device_id` = '27'] ROWS[0] SQL RUNTIME[0.00035882s] SQL[INSERT INTO `observium_processes` (`process_pid`,`process_name`,`process_ppid`,`process_uid`,`process_command`,`process_start`,`device_id`) VALUES ('25849','poller.php','25848','0','php ./poller.php -h rtr-slf.qld.pnet.net.au -dd','1538952055','27')] ROWS[1] SQL RUNTIME[0.00412297s] SQL[SELECT * FROM `alert_tests` WHERE 1] ROWS[1] SQL RUNTIME[0.00033402s] Cached 1 alert rules. SQL[SELECT * FROM `alert_table` WHERE `device_id` = '27'] ROWS[0] SQL RUNTIME[0.00038695s] > $alert_rules /opt/observium/includes/polling/functions.inc.php:492 array( [2] => array( [alert_test_id] => string(1) "2" [entity_type] => string(4) "port" [alert_name] => string(17) "AAPT Transit High" [alert_message] => string(29) "The AAPT Transit is over 100M" [alert_assoc] => null [conditions] => array( [0] => array( [metric] => string(15) "ifInOctets_rate" [condition] => string(2) "ge" [value] => string(9) "100000000" ) ) [conditions_warn] => null [and] => string(1) "1" [severity] => string(4) "crit" [delay] => string(1) "0" [alerter] => string(7) "default" [enable] => string(1) "1" [show_frontpage] => string(1) "1" [suppress_recovery] => string(1) "1" [ignore_until] => null ) ) > $alert_table /opt/observium/includes/polling/functions.inc.php:493 array() ##### rtr-slf.qld.pnet.net.au [27] ##### o OS vrp o OS Group huawei o Last poll duration 3.23 seconds o Last Polled 2018-09-28 11:08:06 o SNMP Version v2c CMD[/usr/bin/fping -t 500 -c 1 -q 103.225.70.102 2>&1] CMD EXITCODE[0] CMD RUNTIME[0.0027s] STDOUT[ 103.225.70.102 : xmt/rcv/%loss = 1/1/0%, min/avg/max = 0.53/0.53/0.53 ] CMD[/usr/bin/snmpget -v2c -c 'PlatinumSNMP' -Pu -OQUs -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'rtr-slf.qld.pnet.net.au':'11164' sysObjectID.0 sysUpTime.0] CMD EXITCODE[127] CMD RUNTIME[0.0009s] STDOUT[ ] STDERR[ sh: 1: exec: /usr/bin/snmpget: not found ] SNMP ERROR - device: 27, cmd: snmpget, options: -OQUs, mib: 'SNMPv2-MIB', oid: 'sysObjectID.0 sysUpTime.0', cmd exitcode: 127, snmp error code: #900, reason: 'isSNMPable', runtime: 0.00094199180603027 SNMP ERROR - device: 27, cmd: snmpget, options: -OQUs, mib: 'SNMPv2-MIB', oid: 'sysObjectID.0 sysUpTime.0', cmd exitcode: 127, snmp error code: #900, reason: 'isSNMPable', runtime: 0.00094199180603027 SNMP STATUS[FALSE] o Device status Device is not responding to SNMP requests RRD /opt/observium/rrd/rtr-slf.qld.pnet.net.au/status.rrd already exists - no need to create. RRD CMD[update /opt/observium/rrd/rtr-slf.qld.pnet.net.au/status.rrd N:0] RRD RUNTIME[0.0014s] RRD STDOUT[OK u:0.00 s:0.00 r:0.01] RRD_STATUS[TRUE] RRD /opt/observium/rrd/rtr-slf.qld.pnet.net.au/ping.rrd already exists - no need to create. RRD CMD[update /opt/observium/rrd/rtr-slf.qld.pnet.net.au/ping.rrd N:0.53] RRD RUNTIME[0.0012s] RRD STDOUT[OK u:0.00 s:0.00 r:0.01] RRD_STATUS[TRUE] RRD /opt/observium/rrd/rtr-slf.qld.pnet.net.au/ping_snmp.rrd already exists - no need to create. RRD CMD[update /opt/observium/rrd/rtr-slf.qld.pnet.net.au/ping_snmp.rrd N:U] RRD RUNTIME[0.0012s] RRD STDOUT[OK u:0.01 s:0.00 r:0.01] RRD_STATUS[TRUE] SQL[DELETE FROM `observium_processes` WHERE `process_pid` = '25849' AND `process_name` = 'poller.php' AND `device_id` = '27'] ROWS[1] SQL RUNTIME[0.00302505s] ./poller.php: rtr-slf.qld.pnet.net.au - 1 devices polled in 0.155 secs ##### Completed polling run at 2018-10-08 09:40:55 ##### > $db_stats /opt/observium/poller.php:217 array( [insert] => int(1) [insert_sec] => double(0.00457406) [update] => int(0) [update_sec] => int(0) [delete] => int(1) [delete_sec] => double(0.00324702) [fetchcell] => int(4) [fetchcell_sec] => double(0.0025918483734131) [fetchrow] => int(6) [fetchrow_sec] => double(0.0036671161651611) [fetchrows] => int(8) [fetchrows_sec] => double(0.022239685058594) [fetchcol] => int(0) [fetchcol_sec] => int(0) [total] => int(20) [total_sec] => double(0.036319729597168) ) NOTE, $config['snmp']['hide_auth'] is set to TRUE, snmp community and snmp v3 auth hidden from debug output. o Devices Polled 1 o Poller Time 0.155 secs o Memory usage 12MB (peak: 14MB) o MySQL Usage Insert[1/0.005s] Update[0/0s] Delete[1/0.003s] Cell[4/0.003s] Row[6/0.004s] Rows[8/0.022s] Col[0/0s] (0.036s 23.432%) o RRDTool Usage update[3/0.004s] (0.004s 2.475%) o SNMP Usage snmpget[1/0.001s] (0.001s 0.608%) RRD PIPE CLOSE[TRUE] > $snmp_stats /opt/observium/poller.php:279 array( [snmpget] => array( [count] => int(1) [time] => double(0.00094199180603027) ) ) From: observium <observium-bounces(a)observium.org <mailto:observium-bounces@observium.org> > On Behalf Of Adam Armstrong via observium Sent: Monday, 8 October 2018 8:38 AM To: Mal via observium <observium(a)observium.org <mailto:observium@observium.org> > Cc: Adam Armstrong <adama(a)memetic.org <mailto:adama@memetic.org> > Subject: Re: [Observium] FW: Can't add Devices/Not polling Do: ./poller.php -h <hostname> -dd And show the output. Adam. Sent from BlueMail <http://www.bluemail.me/r?b=13688> On 7 Oct 2018, at 23:33, Mal via observium <observium(a)observium.org <mailto:observium@observium.org> > wrote: From: mal(a)platinumnetworks.com.au <mailto:mal@platinumnetworks.com.au> <mal(a)platinumnetworks.com.au <mailto:mal@platinumnetworks.com.au> > Sent: Thursday, 4 October 2018 8:39 PM To: 'Observium' <observium(a)observium.org <mailto:observium@observium.org> > Subject: Can't add Devices/Not polling Hi all – my Observium installed has just decided to stop polling and reports all devices as down. I also can’t add new devices. I thought it may have been a lack of disk space so today I have updated to the current subscription version, ran the housekeeping script and cleared out as much off the machine as I can but there has been no change. My RRD directory is only about 5 G and I have around 4G free on that drive so it is not obvious to me that there is a lack of available space. I’ve been having trouble with the firewall config on that host so I also disabled the firewall in case it was blocking traffic. I can ping all the devices I am monitoring from this host and I have another SNMP tool monitoring some of the same devices successfully. So I am pretty certain it is the Observium host that is the location of the problem – I’m just not certain about what could be the problem… Below is the error I receive when I try to add a device I have checked the event logs but there are not even any entries in there to reflect that I have even tried to add a device let alone anything that will give me an indication as to what the problem is. Needless to say, after several hours trying to troubleshoot this I would really appreciate any feedback or direction! Thanks in advance Mal _____ observium mailing list observium(a)observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _____ observium mailing list observium(a)observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

FW: FW: Can't add Devices/Not polling
by mal＠platinumnetworks.com.au 08 Oct '18

08 Oct '18

From: Mal Evans Sent: Monday, 8 October 2018 8:42 AM To: Observium <observium(a)observium.org> Subject: RE: [Observium] FW: Can't add Devices/Not polling Thanks Adam – output below mal@mon:/opt/observium$ sudo ./poller.php -h rtr-slf.qld.pnet.net.au -dd [sudo] password for mal: DEBUG! Load class 'Console_Color2' from '/opt/observium/libs/pear/Console/Color2.php': OK CMD[/usr/bin/svn info /opt/observium] CMD EXITCODE[0] CMD RUNTIME[0.0109s] STDOUT[ Path: . Working Copy Root Path: /opt/observium URL: http://svn.observium.org/svn/observium/trunk Relative URL: ^/observium/trunk Repository Root: http://svn.observium.org/svn Repository UUID: 61d68cd4-352d-0410-923a-c4978735b2b8 Revision: 9449 Node Kind: directory Schedule: normal Last Changed Author: mike Last Changed Rev: 9449 Last Changed Date: 2018-09-30 19:05:07 +1000 (Sun, 30 Sep 2018) ] SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema';] ROWS[1] SQL RUNTIME[0.00045204s] SQL[SELECT @@SESSION.sql_mode;] ROWS[1] SQL RUNTIME[0.00022888s] SQL[SET SESSION `sql_mode` = 'NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION'] ROWS[0] SQL RUNTIME[0.00021482s] DB mode(s) disabled: STRICT_TRANS_TABLES, ONLY_FULL_GROUP_BY SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'current_rev';] ROWS[1] SQL RUNTIME[0.00024605s] SQL[SELECT * FROM `config`] ROWS[15] SQL RUNTIME[0.00034213s] Load class 'Net_IPv6' from '/opt/observium/libs/pear/Net/IPv6.php': OK ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 18.9.9449 http://www.observium.org SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'latest_ver';] ROWS[1] SQL RUNTIME[0.00054002s] SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'latest_rev';] ROWS[1] SQL RUNTIME[0.00022697s] SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'latest_rev_date';] ROWS[1] SQL RUNTIME[0.00023413s] There is a newer revision of Observium available! CMD[date "+%:z"] Wrong process status! Issue in proc_get_status(), see: https://bugs.php.net/bug.php?id=69014 CMD EXITCODE[0] CMD RUNTIME[0.0025s] STDOUT[ +10:00 ] SQL[SELECT TIMEDIFF(NOW(), UTC_TIMESTAMP);] ROWS[1] SQL RUNTIME[0.00035596s] UNIXTIME from DATETIME "time()": LOCAL (2018-10-08 09:40:55), GMT (2018-10-07 22:40:55), TZ (+11:00) Version 18.10.9452 (8th October 2018) is 3 revisions ahead. CMD[/opt/observium/scripts/distro] CMD EXITCODE[0] CMD RUNTIME[0.0139s] STDOUT[ Linux|4.4.0-137-generic|amd64|Ubuntu|16.04|vmware| ] CMD[/usr/bin/env python --version 2>&1] CMD EXITCODE[0] CMD RUNTIME[0.0026s] STDOUT[ Python 2.7.12 ] SQL[SELECT version();] ROWS[1] SQL RUNTIME[0.00035000s] CMD[/usr/bin/rrdtool --version | head -n1] CMD EXITCODE[0] CMD RUNTIME[0.0083s] STDOUT[ RRDtool 1.5.5 Copyright by Tobias Oetiker <tobi(a)oetiker.ch <mailto:tobi@oetiker.ch> > ] CMD[/usr/bin/fping -v 2>&1] CMD EXITCODE[0] CMD RUNTIME[0.0019s] STDOUT[ /usr/bin/fping: Version 3.13 /usr/bin/fping: comments to david(a)schweikert.ch <mailto:david@schweikert.ch> ] CMD[/usr/sbin/apache2 -v | awk '/Server version:/ {print $3}'] CMD EXITCODE[0] CMD RUNTIME[0.0503s] STDOUT[ Apache/2.4.18 ] SQL[SELECT @@SESSION.sql_mode;] ROWS[1] SQL RUNTIME[0.00060105s] SQL[SHOW VARIABLES LIKE 'character_set_connection'] ROWS[1] SQL RUNTIME[0.01740503s] ##### Software versions ##### o OS Linux 4.4.0-137-generic [amd64] (Ubuntu 16.04) o Apache 2.4.18 o PHP 7.0.32-0ubuntu0.16.04.1 (OPcache: DISABLED) o Python 2.7.12 o MySQL 5.7.23-0ubuntu0.16.04.1 (extension: mysqli 5.0.12-dev) o SNMP not found o RRDtool 1.5.5 o Fping 3.13 (IPv4 and IPv6) ##### Memory Limit ##### o PHP Unlimited ##### MySQL mode ##### o MySQL NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION ##### Charset info ##### o PHP UTF-8 o MySQL utf8 ##### Timezones info ##### o Date Monday, 08-Oct-18 09:40:55 AEDT o PHP +11:00 o MySQL +10:00 SQL[SELECT * FROM `alerts_maint` WHERE `maint_start` < '1538952055' AND `maint_end` > '1538952055'] ROWS[0] SQL RUNTIME[0.00051713s] RRD PIPE OPEN[TRUE] ##### Starting polling run at 2018-10-08 09:40:55 ##### SQL[SELECT `device_id` FROM `devices` WHERE `disabled` = 0 AND `hostname` LIKE 'rtr-slf.qld.pnet.net.au' ORDER BY `device_id` ASC] ROWS[1] SQL RUNTIME[0.00057888s] SQL[SELECT * FROM `devices` WHERE `device_id` = '27'] ROWS[1] SQL RUNTIME[0.00041914s] SQL[SELECT * FROM `entity_attribs` WHERE `entity_type` = 'device' AND `entity_id` = '27'] ROWS[1] SQL RUNTIME[0.00042796s] > $device /opt/observium/includes/polling/functions.inc.php:483 array( [device_id] => string(2) "27" [hostname] => string(23) "rtr-slf.qld.pnet.net.au" [sysName] => string(11) "rtr-slf.qld" [snmp_community] => string(12) "PlatinumSNMP" [snmp_authlevel] => null [snmp_authname] => null [snmp_authpass] => null [snmp_authalgo] => null [snmp_cryptopass] => null [snmp_cryptoalgo] => null [snmp_version] => string(3) "v2c" [snmp_port] => string(5) "11164" [snmp_timeout] => null [snmp_retries] => null [snmp_maxrep] => null [ssh_port] => string(2) "22" [agent_version] => null [snmp_transport] => string(3) "udp" [bgpLocalAs] => null [snmpEngineID] => string(22) "800007DB03883FD32FDB21" [sysObjectID] => string(27) ".1.3.6.1.4.1.2011.2.224.133" [sysDescr] => string(176) "Huawei AR169FGW-L Huawei Versatile Routing Platform Software VRP (R) software,Version 5.160 (AR169FGW-L V200R007C00SPCb00) Copyright (C) 2011-2016 Huawei Technologies Co., Ltd" [sysContact] => string(17) "Platinum Networks" [version] => string(5) "5.160" [hardware] => string(0) "" [features] => string(17) "V200R007C00SPCb00" [location] => string(35) "Level 2, 217 George Street Brisbane" [os] => string(3) "vrp" [status] => string(1) "0" [ignore] => string(1) "0" [ignore_until] => null [asset_tag] => null [disabled] => string(1) "0" [uptime] => string(7) "6797935" [last_rebooted] => string(10) "1531299027" [force_discovery] => string(1) "0" [last_polled] => string(19) "2018-09-28 11:08:06" [last_discovered] => string(19) "2018-09-28 06:38:41" [last_alerter] => string(19) "2018-10-08 08:40:22" [last_polled_timetaken] => string(4) "3.23" [last_discovered_timetaken] => string(4) "7.75" [purpose] => null [type] => string(7) "network" [serial] => null [icon] => null [device_state] => string(13597) "a:4:{s:15:"poller_mod_perf";a:27:{s:6:"system";d:0.1202;s:2:"os";d:0.032599999999999997;s:7:"sensors";d:0.025700000000000001;s:6:"status";d:0.00080000000000000004;s:10:"processors";d:0.53269999999999995;s:8:"mempools";d:0.1133;s:7:"storage";d:0.00080000000000000004;s:8:"netstats";d:0.47199999999999998;s:6:"hr-mib";d:0.021999999999999999;s:7:"ucd-mib";d:0.050200000000000002;s:13:"ipSystemStats";d:0.090499999999999997;s:5:"ports";d:1.1046;s:9:"bgp-peers";d:0.021700000000000001;s:15:"printersupplies";d:0.00059999999999999995;s:10:"ucd-diskio";d:0.00059999999999999995;s:4:"wifi";d:0.0016000000000000001;s:10:"p2p-radios";d:0.0011000000000000001;s:4:"ospf";d:0.34749999999999998;s:3:"sla";d:0.0012999999999999999;s:11:"pseudowires";d:0.00080000000000000004;s:14:"mac-accounting";d:0.001;s:12:"loadbalancer";d:0.00069999999999999999;s:15:"entity-physical";d:0.00020000000000000001;s:12:"applications";d:0.00089999999999999998;s:9:"fdb-table";d:0.1444;s:6:"graphs";d:0.00089999999999999998;s:4:"oids";d:0.00089999999999999998;}s:17:"poller_ports_perf";a:1:{s:4:"vlan";d:0.1332399845123291;}s:14:"poller_history";a:288:{i:1538096883;d:3.2341000000000002;i:1538096606;d:6.7492000000000001;i:1538096310;d:3.9961000000000002;i:1538095996;d:3.0249999999999999;i:1538095685;d:3.5903999999999998;i:1538095413;d:3.5851999999999999;i:1538095143;d:3.3856999999999999;i:1538094834;d:3.5752000000000002;i:1538094527;d:3.0781000000000001;i:1538094164;d:3.1539999999999999;i:1538093911;d:4.3428000000000004;i:1538093642;d:3.6230000000000002;i:1538093386;d:3.0167999999999999;i:1538093108;d:4.5301999999999998;i:1538092703;d:2.9601000000000002;i:1538092374;d:3.3117999999999999;i:1538092107;d:3.7368999999999999;i:1538091750;d:2.9855;i:1538091527;d:4.3973000000000004;i:1538091201;d:3.0099999999999998;i:1538090865;d:3.0404;i:1538090624;d:3.4723999999999999;i:1538090317;d:2.9470999999999998;i:1538090040;d:3.1560000000000001;i:1538089693;d:3.6059000000000001;i:1538089357;d:4.6970999999999998;i:1538089111;d:4.0666000000000002;i:1538088809;d:2.9973000000000001;i:1538088453;d:2.9653;i:1538088212;d:3.7945000000000002;i:1538087929;d:3.1436999999999999;i:1538087611;d:3.0897999999999999;i:1538087314;d:3.3374999999999999;i:1538087020;d:2.9289999999999998;i:1538086665;d:2.9698000000000002;i:1538086356;d:3.8460000000000001;i:1538086091;d:4.3402000000000003;i:1538085783;d:4.4097;i:1538085495;d:3.8618999999999999;i:1538085118;d:3.0468000000000002;i:1538084881;d:4.6494999999999997;i:1538084540;d:3.2532000000000001;i:1538084291;d:4.0883000000000003;i:1538083954;d:4.2942;i:1538083707;d:4.2523;i:1538083342;d:2.9864999999999999;i:1538083078;d:3.9192999999999998;i:1538082761;d:3.2778;i:1538082483;d:3.7212999999999998;i:1538082237;d:4.2850999999999999;i:1538081883;d:2.9203000000000001;i:1538081573;d:3.2700999999999998;i:1538081310;d:3.4830000000000001;i:1538080940;d:2.9014000000000002;i:1538080726;d:4.0275999999999996;i:1538080333;d:2.9708999999999999;i:1538080081;d:4.9927000000000001;i:1538079773;d:3.4756;i:1538079454;d:3.5095999999999998;i:1538079143;d:3.6776;i:1538078914;d:3.7774999999999999;i:1538078587;d:4.0484999999999998;i:1538078215;d:3.8601000000000001;i:1538077961;d:4.6565000000000003;i:1538077645;d:3.7262;i:1538077339;d:3.8149000000000002;i:1538077130;d:4.0946999999999996;i:1538076783;d:2.9457;i:1538076499;d:3.6440000000000001;i:1538076176;d:2.9975999999999998;i:1538075873;d:3.4704999999999999;i:1538075515;d:3.3658999999999999;i:1538075299;d:3.8454000000000002;i:1538074988;d:3.0110000000000001;i:1538074668;d:3.5687000000000002;i:1538074343;d:3.6577000000000002;i:1538074043;d:3.9218000000000002;i:1538073762;d:3.9792999999999998;i:1538073522;d:3.5383;i:1538073171;d:3.6278000000000001;i:1538072836;d:3.6461000000000001;i:1538072583;d:4.0179;i:1538072220;d:3.1810999999999998;i:1538071957;d:4.7098000000000004;i:1538071675;d:3.4262000000000001;i:1538071445;d:4.7660999999999998;i:1538071077;d:3.0270000000000001;i:1538070751;d:3.3416999999999999;i:1538070424;d:3.6038999999999999;i:1538070136;d:4.0270999999999999;i:1538069867;d:4.1707999999999998;i:1538069633;d:4.6867999999999999;i:1538069229;d:2.9845000000000002;i:1538068985;d:4.1532999999999998;i:1538068673;d:3.1450999999999998;i:1538068387;d:3.6192000000000002;i:1538068066;d:3.3205;i:1538067737;d:5.0822000000000003;i:1538067474;d:3.9601999999999999;i:1538067121;d:3.0867;i:1538066864;d:4.3624000000000001;i:1538066538;d:3.3744000000000001;i:1538066280;d:4.2998000000000003;i:1538065956;d:4.5049999999999999;i:1538065620;d:4.4577;i:1538065367;d:5.4419000000000004;i:1538065086;d:3.5419999999999998;i:1538064789;d:3.3999999999999999;i:1538064514;d:3.9824000000000002;i:1538064183;d:4.5289999999999999;i:1538063877;d:3.8613;i:1538063551;d:3.3601999999999999;i:1538063274;d:3.4397000000000002;i:1538063006;d:3.194;i:1538062653;d:2.9878;i:1538062370;d:5.0301;i:1538062055;d:3.7035999999999998;i:1538061802;d:3.7561;i:1538061441;d:2.9472999999999998;i:1538061176;d:3.875;i:1538060917;d:3.5076999999999998;i:1538060615;d:3.6699999999999999;i:1538060222;d:3.5133999999999999;i:1538059976;d:4.4635999999999996;i:1538059647;d:3.7187999999999999;i:1538059364;d:4.0709;i:1538059050;d:3.6208999999999998;i:1538058753;d:4.5639000000000003;i:1538058450;d:3.7237;i:1538058178;d:3.6589;i:1538057838;d:3.3045;i:1538057555;d:4.1040000000000001;i:1538057334;d:3.5853000000000002;i:1538056972;d:2.9386999999999999;i:1538056653;d:3.7282999999999999;i:1538056371;d:3.8065000000000002;i:1538056114;d:3.5325000000000002;i:1538055780;d:3.0958000000000001;i:1538055450;d:3.3837000000000002;i:1538055232;d:5.6223999999999998;i:1538054868;d:3.1514000000000002;i:1538054534;d:3.9215;i:1538054284;d:4.5631000000000004;i:1538053995;d:3.4510999999999998;i:1538053662;d:3.2890000000000001;i:1538053379;d:4.8674999999999997;i:1538053080;d:3.8666999999999998;i:1538052750;d:2.9807000000000001;i:1538052479;d:3.6278999999999999;i:1538052131;d:3.1842000000000001;i:1538051868;d:4.3533999999999997;i:1538051588;d:4.8170000000000002;i:1538051267;d:3.5983999999999998;i:1538050956;d:3.4679000000000002;i:1538050679;d:3.7153999999999998;i:1538050374;d:3.6473;i:1538050134;d:3.5888;i:1538049629;d:2.9708000000000001;i:1538049460;d:8.1469000000000005;i:1538049168;d:3.5356999999999998;i:1538048845;d:3.3631000000000002;i:1538048538;d:3.7006999999999999;i:1538048337;d:4.4008000000000003;i:1538048044;d:2.9864000000000002;i:1538047702;d:2.9557000000000002;i:1538047347;d:2.9910000000000001;i:1538047108;d:3.9708999999999999;i:1538046789;d:3.0678000000000001;i:1538046496;d:3.403;i:1538046206;d:4.0400999999999998;i:1538045851;d:3.4628000000000001;i:1538045625;d:4.0418000000000003;i:1538045239;d:2.9009;i:1538044977;d:4.0365000000000002;i:1538044723;d:3.5535000000000001;i:1538044339;d:3.4213;i:1538044062;d:4.3501000000000003;i:1538043803;d:3.8041999999999998;i:1538043510;d:3.0160999999999998;i:1538043150;d:3.0059;i:1538042898;d:3.8214999999999999;i:1538042637;d:4.0918999999999999;i:1538042235;d:2.9893999999999998;i:1538041975;d:4.2956000000000003;i:1538041625;d:3.6320999999999999;i:1538041358;d:4.6371000000000002;i:1538041101;d:4.0105000000000004;i:1538040728;d:4.0038999999999998;i:1538040462;d:4.2099000000000002;i:1538040172;d:3.5746000000000002;i:1538039896;d:3.8418999999999999;i:1538039585;d:3.0783;i:1538039305;d:3.5063;i:1538039039;d:4.0595999999999997;i:1538038639;d:3.1524000000000001;i:1538038355;d:3.8142999999999998;i:1538038083;d:3.8182;i:1538037803;d:3.3988;i:1538037458;d:3.2178;i:1538037175;d:5.2276999999999996;i:1538036910;d:3.9146000000000001;i:1538036585;d:3.056;i:1538036291;d:3.4742000000000002;i:1538035934;d:3.1968999999999999;i:1538035692;d:4.5255999999999998;i:1538035415;d:4.7695999999999996;i:1538035042;d:3.5865999999999998;i:1538034727;d:4.1601999999999997;i:1538034391;d:4.0175999999999998;i:1538034179;d:5.5098000000000003;i:1538033873;d:3.5552999999999999;i:1538033619;d:4.6352000000000002;i:1538033311;d:3.0676999999999999;i:1538032925;d:2.9419;i:1538032673;d:5.1768000000000001;i:1538032408;d:3.3380000000000001;i:1538032066;d:3.0813999999999999;i:1538031831;d:5.1436999999999999;i:1538031518;d:3.1482000000000001;i:1538031214;d:2.9502999999999999;i:1538030925;d:3.1301999999999999;i:1538030587;d:3.1027999999999998;i:1538030254;d:3.6613000000000002;i:1538030088;d:5.9353999999999996;i:1538029651;d:2.9712999999999998;i:1538029430;d:4.0724;i:1538029073;d:3.0114000000000001;i:1538028819;d:4.0864000000000003;i:1538028468;d:3.4072;i:1538028258;d:5.2679999999999998;i:1538027875;d:3.3982999999999999;i:1538027627;d:3.9584999999999999;i:1538027296;d:3.0360999999999998;i:1538027016;d:3.4028999999999998;i:1538026754;d:3.391;i:1538026401;d:3.1278000000000001;i:1538026105;d:3.7959999999999998;i:1538025813;d:3.3414999999999999;i:1538025500;d:3.3069999999999999;i:1538025155;d:3.6038000000000001;i:1538024913;d:4.1936999999999998;i:1538024597;d:4.3296999999999999;i:1538024315;d:3.8589000000000002;i:1538024042;d:3.1970000000000001;i:1538023720;d:2.9822000000000002;i:1538023352;d:3.0276999999999998;i:1538023091;d:4.4111000000000002;i:1538022808;d:5.0712000000000002;i:1538022521;d:3.5150999999999999;i:1538022167;d:3.1518999999999999;i:1538021889;d:3.9045000000000001;i:1538021656;d:3.9718;i:1538021344;d:2.9900000000000002;i:1538021075;d:3.0324;i:1538020728;d:2.9912000000000001;i:1538020414;d:3.0663999999999998;i:1538020108;d:3.4420999999999999;i:1538019840;d:3.4765999999999999;i:1538019573;d:3.0379999999999998;i:1538019168;d:3.0318999999999998;i:1538018911;d:4.5292000000000003;i:1538018588;d:3.0362;i:1538018341;d:4.3705999999999996;i:1538018050;d:3.5909;i:1538017791;d:3.3767999999999998;i:1538017469;d:3.1556000000000002;i:1538017132;d:3.6358000000000001;i:1538016726;d:3.0318999999999998;i:1538016476;d:5.6369999999999996;i:1538016179;d:4.0448000000000004;i:1538015854;d:4.3811999999999998;i:1538015659;d:5.8514999999999997;i:1538015337;d:3.2549000000000001;i:1538014985;d:3.2122000000000002;i:1538014676;d:4.0532000000000004;i:1538014510;d:3.1556999999999999;i:1538014204;d:4.3333000000000004;i:1538013922;d:3.1497000000000002;i:1538013497;d:3.0994999999999999;i:1538013181;d:3.8603999999999998;i:1538012934;d:3.9632999999999998;i:1538012655;d:3.1371000000000002;i:1538012311;d:3.3313000000000001;i:1538011999;d:4.8042999999999996;i:1538011743;d:4.4160000000000004;i:1538011403;d:3.0274000000000001;i:1538011100;d:3.7353000000000001;i:1538010818;d:3.4683999999999999;}s:17:"discovery_history";a:100:{i:1538080714;d:7.7544000000000004;i:1538058954;d:11.8148;i:1538037386;d:7.1657000000000002;i:1538015811;d:7.5838000000000001;i:1537994199;d:7.1746999999999996;i:1537972672;d:7.6186999999999996;i:1537951026;d:9.1906999999999996;i:1537929401;d:8.9390999999999998;i:1537907760;d:6.9756;i:1537886184;d:7.3825000000000003;i:1537864597;d:7.3075000000000001;i:1537843033;d:7.3891;i:1537821394;d:7.5202;i:1537799799;d:7.7005999999999997;i:1537778194;d:8.4852000000000007;i:1537756660;d:8.7713999999999999;i:1537735006;d:7.5862999999999996;i:1537713387;d:8.0109999999999992;i:1537691787;d:7.3535000000000004;i:1537670226;d:7.6965000000000003;i:1537648609;d:8.2081;i:1537626998;d:7.4366000000000003;i:1537605387;d:7.7065999999999999;i:1537583780;d:7.5105000000000004;i:1537562202;d:7.5899000000000001;i:1537540589;d:7.6036000000000001;i:1537518999;d:7.3528000000000002;i:1537497396;d:7.9557000000000002;i:1537475839;d:7.3705999999999996;i:1537454188;d:8.5061999999999998;i:1537432601;d:7.3613;i:1537411004;d:8.2899999999999991;i:1537389392;d:7.4923999999999999;i:1537367772;d:7.7808999999999999;i:1537346241;d:6.9629000000000003;i:1537324683;d:9.3427000000000007;i:1537303013;d:8.5792999999999999;i:1537281409;d:7.9107000000000003;i:1537259778;d:7.6986999999999997;i:1537238203;d:7.5811999999999999;i:1537216594;d:7.4325000000000001;i:1537194987;d:7.5598999999999998;i:1537173376;d:7.1814999999999998;i:1537151822;d:7.3376000000000001;i:1537130177;d:7.5002000000000004;i:1537108585;d:7.2328000000000001;i:1537086974;d:7.5750000000000002;i:1537065377;d:7.2988;i:1537043762;d:7.2800000000000002;i:1537022166;d:7.0979999999999999;i:1537000580;d:7.3391000000000002;i:1536978980;d:7.3795999999999999;i:1536957427;d:7.5382999999999996;i:1536935803;d:8.4991000000000003;i:1536914176;d:7.6386000000000003;i:1536892643;d:7.4509999999999996;i:1536870967;d:7.2976999999999999;i:1536849371;d:7.3731999999999998;i:1536827784;d:7.5589000000000004;i:1536806192;d:7.3960999999999997;i:1536784576;d:7.2220000000000004;i:1536762955;d:7.2169999999999996;i:1536741335;d:6.8833000000000002;i:1536719833;d:7.1026999999999996;i:1536698172;d:7.4108000000000001;i:1536676570;d:7.4114000000000004;i:1536654965;d:7.3682999999999996;i:1536633387;d:7.3731999999999998;i:1536611750;d:7.024;i:1536590174;d:6.8372999999999999;i:1536568541;d:6.9978999999999996;i:1536546983;d:7.0103999999999997;i:1536525376;d:6.8952;i:1536503781;d:7.1639999999999997;i:1536482166;d:7.2619999999999996;i:1536460579;d:6.9081000000000001;i:1536438996;d:7.0580999999999996;i:1536417384;d:7.3914;i:1536395788;d:7.3792;i:1536374186;d:7.5015000000000001;i:1536352570;d:7.0444000000000004;i:1536330988;d:7.1060999999999996;i:1536309359;d:7.4617000000000004;i:1536287808;d:6.9250999999999996;i:1536266167;d:6.8148;i:1536244568;d:6.7591999999999999;i:1536222980;d:7.0377000000000001;i:1536201409;d:6.9621000000000004;i:1536179768;d:7.9686000000000003;i:1536158170;d:7.3461999999999996;i:1536136573;d:7.5946999999999996;i:1536115020;d:7.0101000000000004;i:1536093371;d:7.4097999999999997;i:1536071785;d:7.4455;i:1536050175;d:7.4588999999999999;i:1536028587;d:7.5102000000000002;i:1536006980;d:7.3712999999999997;i:1535985388;d:6.9196;i:1535963759;d:7.6353;i:1535942219;d:7.0571000000000002;}}" [distro] => null [distro_ver] => null [kernel] => null [arch] => null ) > $attribs /opt/observium/includes/polling/functions.inc.php:484 array( [ports_ignored_count] => string(1) "2" ) SQL[SELECT * FROM `observium_processes` WHERE `process_name` = 'poller.php' AND `device_id` = '27'] ROWS[0] SQL RUNTIME[0.00035882s] SQL[INSERT INTO `observium_processes` (`process_pid`,`process_name`,`process_ppid`,`process_uid`,`process_command`,`process_start`,`device_id`) VALUES ('25849','poller.php','25848','0','php ./poller.php -h rtr-slf.qld.pnet.net.au -dd','1538952055','27')] ROWS[1] SQL RUNTIME[0.00412297s] SQL[SELECT * FROM `alert_tests` WHERE 1] ROWS[1] SQL RUNTIME[0.00033402s] Cached 1 alert rules. SQL[SELECT * FROM `alert_table` WHERE `device_id` = '27'] ROWS[0] SQL RUNTIME[0.00038695s] > $alert_rules /opt/observium/includes/polling/functions.inc.php:492 array( [2] => array( [alert_test_id] => string(1) "2" [entity_type] => string(4) "port" [alert_name] => string(17) "AAPT Transit High" [alert_message] => string(29) "The AAPT Transit is over 100M" [alert_assoc] => null [conditions] => array( [0] => array( [metric] => string(15) "ifInOctets_rate" [condition] => string(2) "ge" [value] => string(9) "100000000" ) ) [conditions_warn] => null [and] => string(1) "1" [severity] => string(4) "crit" [delay] => string(1) "0" [alerter] => string(7) "default" [enable] => string(1) "1" [show_frontpage] => string(1) "1" [suppress_recovery] => string(1) "1" [ignore_until] => null ) ) > $alert_table /opt/observium/includes/polling/functions.inc.php:493 array() ##### rtr-slf.qld.pnet.net.au [27] ##### o OS vrp o OS Group huawei o Last poll duration 3.23 seconds o Last Polled 2018-09-28 11:08:06 o SNMP Version v2c CMD[/usr/bin/fping -t 500 -c 1 -q 103.225.70.102 2>&1] CMD EXITCODE[0] CMD RUNTIME[0.0027s] STDOUT[ 103.225.70.102 : xmt/rcv/%loss = 1/1/0%, min/avg/max = 0.53/0.53/0.53 ] CMD[/usr/bin/snmpget -v2c -c 'PlatinumSNMP' -Pu -OQUs -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'rtr-slf.qld.pnet.net.au':'11164' sysObjectID.0 sysUpTime.0] CMD EXITCODE[127] CMD RUNTIME[0.0009s] STDOUT[ ] STDERR[ sh: 1: exec: /usr/bin/snmpget: not found ] SNMP ERROR - device: 27, cmd: snmpget, options: -OQUs, mib: 'SNMPv2-MIB', oid: 'sysObjectID.0 sysUpTime.0', cmd exitcode: 127, snmp error code: #900, reason: 'isSNMPable', runtime: 0.00094199180603027 SNMP ERROR - device: 27, cmd: snmpget, options: -OQUs, mib: 'SNMPv2-MIB', oid: 'sysObjectID.0 sysUpTime.0', cmd exitcode: 127, snmp error code: #900, reason: 'isSNMPable', runtime: 0.00094199180603027 SNMP STATUS[FALSE] o Device status Device is not responding to SNMP requests RRD /opt/observium/rrd/rtr-slf.qld.pnet.net.au/status.rrd already exists - no need to create. RRD CMD[update /opt/observium/rrd/rtr-slf.qld.pnet.net.au/status.rrd N:0] RRD RUNTIME[0.0014s] RRD STDOUT[OK u:0.00 s:0.00 r:0.01] RRD_STATUS[TRUE] RRD /opt/observium/rrd/rtr-slf.qld.pnet.net.au/ping.rrd already exists - no need to create. RRD CMD[update /opt/observium/rrd/rtr-slf.qld.pnet.net.au/ping.rrd N:0.53] RRD RUNTIME[0.0012s] RRD STDOUT[OK u:0.00 s:0.00 r:0.01] RRD_STATUS[TRUE] RRD /opt/observium/rrd/rtr-slf.qld.pnet.net.au/ping_snmp.rrd already exists - no need to create. RRD CMD[update /opt/observium/rrd/rtr-slf.qld.pnet.net.au/ping_snmp.rrd N:U] RRD RUNTIME[0.0012s] RRD STDOUT[OK u:0.01 s:0.00 r:0.01] RRD_STATUS[TRUE] SQL[DELETE FROM `observium_processes` WHERE `process_pid` = '25849' AND `process_name` = 'poller.php' AND `device_id` = '27'] ROWS[1] SQL RUNTIME[0.00302505s] ./poller.php: rtr-slf.qld.pnet.net.au - 1 devices polled in 0.155 secs ##### Completed polling run at 2018-10-08 09:40:55 ##### > $db_stats /opt/observium/poller.php:217 array( [insert] => int(1) [insert_sec] => double(0.00457406) [update] => int(0) [update_sec] => int(0) [delete] => int(1) [delete_sec] => double(0.00324702) [fetchcell] => int(4) [fetchcell_sec] => double(0.0025918483734131) [fetchrow] => int(6) [fetchrow_sec] => double(0.0036671161651611) [fetchrows] => int(8) [fetchrows_sec] => double(0.022239685058594) [fetchcol] => int(0) [fetchcol_sec] => int(0) [total] => int(20) [total_sec] => double(0.036319729597168) ) NOTE, $config['snmp']['hide_auth'] is set to TRUE, snmp community and snmp v3 auth hidden from debug output. o Devices Polled 1 o Poller Time 0.155 secs o Memory usage 12MB (peak: 14MB) o MySQL Usage Insert[1/0.005s] Update[0/0s] Delete[1/0.003s] Cell[4/0.003s] Row[6/0.004s] Rows[8/0.022s] Col[0/0s] (0.036s 23.432%) o RRDTool Usage update[3/0.004s] (0.004s 2.475%) o SNMP Usage snmpget[1/0.001s] (0.001s 0.608%) RRD PIPE CLOSE[TRUE] > $snmp_stats /opt/observium/poller.php:279 array( [snmpget] => array( [count] => int(1) [time] => double(0.00094199180603027) ) ) From: observium <observium-bounces(a)observium.org <mailto:observium-bounces@observium.org> > On Behalf Of Adam Armstrong via observium Sent: Monday, 8 October 2018 8:38 AM To: Mal via observium <observium(a)observium.org <mailto:observium@observium.org> > Cc: Adam Armstrong <adama(a)memetic.org <mailto:adama@memetic.org> > Subject: Re: [Observium] FW: Can't add Devices/Not polling Do: ./poller.php -h <hostname> -dd And show the output. Adam. Sent from BlueMail <http://www.bluemail.me/r?b=13688> On 7 Oct 2018, at 23:33, Mal via observium <observium(a)observium.org <mailto:observium@observium.org> > wrote: From: mal(a)platinumnetworks.com.au <mailto:mal@platinumnetworks.com.au> <mal(a)platinumnetworks.com.au <mailto:mal@platinumnetworks.com.au> > Sent: Thursday, 4 October 2018 8:39 PM To: 'Observium' <observium(a)observium.org <mailto:observium@observium.org> > Subject: Can't add Devices/Not polling Hi all – my Observium installed has just decided to stop polling and reports all devices as down. I also can’t add new devices. I thought it may have been a lack of disk space so today I have updated to the current subscription version, ran the housekeeping script and cleared out as much off the machine as I can but there has been no change. My RRD directory is only about 5 G and I have around 4G free on that drive so it is not obvious to me that there is a lack of available space. I’ve been having trouble with the firewall config on that host so I also disabled the firewall in case it was blocking traffic. I can ping all the devices I am monitoring from this host and I have another SNMP tool monitoring some of the same devices successfully. So I am pretty certain it is the Observium host that is the location of the problem – I’m just not certain about what could be the problem… Below is the error I receive when I try to add a device I have checked the event logs but there are not even any entries in there to reflect that I have even tried to add a device let alone anything that will give me an indication as to what the problem is. Needless to say, after several hours trying to troubleshoot this I would really appreciate any feedback or direction! Thanks in advance Mal _____ observium mailing list observium(a)observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

Can ifAlias_persist include Ubuntu 18.04 config please
by Pieter De Wit 08 Oct '18

08 Oct '18

Hi Devs, Can ifAlias_persist please be updated to include Ubuntu 18.04's way of config files ? 18.04 now stores files in /etc/network/interfaces.d/* (might be since 17 something) Thanks Pieter

1 0

FW: Can't add Devices/Not polling
by mal＠platinumnetworks.com.au 08 Oct '18

08 Oct '18

From: mal(a)platinumnetworks.com.au <mal(a)platinumnetworks.com.au> Sent: Thursday, 4 October 2018 8:39 PM To: 'Observium' <observium(a)observium.org> Subject: Can't add Devices/Not polling Hi all - my Observium installed has just decided to stop polling and reports all devices as down. I also can't add new devices. I thought it may have been a lack of disk space so today I have updated to the current subscription version, ran the housekeeping script and cleared out as much off the machine as I can but there has been no change. My RRD directory is only about 5 G and I have around 4G free on that drive so it is not obvious to me that there is a lack of available space. I've been having trouble with the firewall config on that host so I also disabled the firewall in case it was blocking traffic. I can ping all the devices I am monitoring from this host and I have another SNMP tool monitoring some of the same devices successfully. So I am pretty certain it is the Observium host that is the location of the problem - I'm just not certain about what could be the problem. Below is the error I receive when I try to add a device I have checked the event logs but there are not even any entries in there to reflect that I have even tried to add a device let alone anything that will give me an indication as to what the problem is. Needless to say, after several hours trying to troubleshoot this I would really appreciate any feedback or direction! Thanks in advance Mal

2 1

test
by Adam Armstrong 05 Oct '18

05 Oct '18

test

3 2

test
by Mike Stupalov 02 Oct '18

02 Oct '18

ignore mail -- Mike Stupalov Observium Limited, http://observium.org

2 1

empty poller wrapper history
by Tomasz Karczewski 02 Oct '18

02 Oct '18

Hi, After update poller wrapper history has stopped drawing poller wrapper history. I attached screen. Thanks for response. Tomasz Karczewski Administrator Sieci <mailto:tkarczewski@man.olsztyn.pl> tkarczewski(a)man.olsztyn.pl <http://www.man.olsztyn.pl> http://www.man.olsztyn.pl <http://www.uwm.edu.pl> http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

3 8

apps
by Arnoldo Vidal Bravo 01 Oct '18

01 Oct '18

hi, i can't do it show apps menu or enable it, please help -- Saluda cordialmente

2 2

make selinux enforcing again
by David Pinkerton 01 Oct '18

01 Oct '18

As Red Hat consultant it makes me sad to see the first instruction to install software is to disable SELinux. It really isn't that hard to learn. My observium installation (on RHEL 7) Assuming Observium is installed in /opt/observium # ensure semange is installed yum install policycoreutils-python # set policy to allow apache to write to observium directories # this could be restricted to read-only on all except rrd & logs. semanage fcontext -a -t httpd_sys_rw_content_t "/opt/observium(/.*)?" # apply policy restorecon -R -v /opt/observium <http://apac.redhat.com/>

5 5

Open Street Map Leaflet
by Pieter De Wit 01 Oct '18

01 Oct '18

Hey Guys, This is a cosmic "issue" but an annoying one for us, I do understand that it won't effect a lot of people. We have systems in Fiji that we monitor and one of them happen to be at location: -16.84368611 -179.96583333 Most of the other systems are located "to the left" which happens to be across the 180 degree mark - or the line where -179.99999 and 179.99999 are next to each other. The problem is the map doesn't like to display this, since it displays either one, depending on where you are zoomed into. The "overview map" also shows the entire world, since the data is spread from 179 -> -179 Is there an easy way to fix this ? Thanks !

1 0

Proposed remote install for install script
by Pieter De Wit 01 Oct '18

01 Oct '18

Hey Tom :) Here is my 10 min hack to this: # diff observium_installscript.sh orig_observium_installscript.sh 9,47d8 < function remoteagentinstall { < echo -e "\nPlease enter the remote host you would to install to:${NC}" < read remote_srv < echo -e "Please enter the username for ${remote_srv}:${NC}" < read remote_user < echo -e "${GREEN}Installing additional packages...${NC}" < ssh -Cl ${remote_user} ${remote_srv} "apt-get -qq install -y xinetd snmpd libwww-perl libsnmp-extension-passpersist-perl" < scp /opt/observium/scripts/observium_agent_xinetd ${remote_user}@ ${remote_srv}:/etc/xinetd.d/observium_agent_xinetd < ssh -Cl ${remote_user} ${remote_srv} "service xinetd restart" < scp /opt/observium/scripts/observium_agent ${remote_user}@ ${remote_srv}:/usr/bin/observium_agent < ssh -Cl ${remote_user} ${remote_srv} "mkdir -p /usr/lib/observium_agent /usr/lib/observium_agent/scripts-available /usr/lib/observium_agent/scripts-enabled" < scp -r /opt/observium/scripts/agent-local/* ${remote_user}@ ${remote_srv}:/usr/lib/observium_agent/scripts-available < ssh -Cl ${remote_user} ${remote_srv} "chmod +x /usr/bin/observium_agent && \ < ln -sf /usr/lib/observium_agent/scripts-available/dmi /usr/lib/observium_agent/scripts-enabled && \ < ln -sf /usr/lib/observium_agent/scripts-available/apache /usr/lib/observium_agent/scripts-enabled && \ < ln -sf /usr/lib/observium_agent/scripts-available/mysql /usr/lib/observium_agent/scripts-enabled" < scp /opt/observium/scripts/distro ${remote_user}@ ${remote_srv}:/usr/bin/distro < ssh -Cl ${remote_user} ${remote_srv} "chmod +x /usr/bin/distro" < scp /opt/observium/scripts/ifAlias_persist ${remote_user}@ ${remote_srv}:/usr/bin/ifAlias_persist < ssh -Cl ${remote_user} ${remote_srv} "chmod +x /usr/bin/ifAlias_persist" < < echo -e "${GREEN}Reconfiguring ${remote_srv} snmpd${NC}" < < snmpcommunity="$(< /dev/urandom tr -dc _A-Z-a-z-0-9 | head -c${1:-15};echo;)" < < echo "agentAddress udp:0.0.0.0:161" > /tmp/snmpd.conf < echo "view all included .1" >> /tmp/snmpd.conf < echo "rocommunity $snmpcommunity" >> /tmp/snmpd.conf < echo "extend .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro" >> /tmp/snmpd.conf < echo "pass_persist .1.3.6.1.2.1.31.1.1.1.18 /usr/bin/ifAlias_persist" >> /tmp/snmpd.conf < scp /tmp/snmpd.conf ${remote_user}@${remote_srv}:/etc/snmp/ < ssh -Cl ${remote_user} ${remote_srv} "service snmpd restart" < < echo -e "${GREEN}Adding ${remote_srv} to Observium${NC}" < /opt/observium/add_device.php ${remote_srv} $snmpcommunity < echo -e "${GREEN}DONE! UNIX-agent is installed and ${remote_srv} is now monitored by Observium${NC}" < < } < 133,134c94 < echo "5. Remotely Install the UNIX-Agent (snmpd-config will be overwritten)" < echo -n "(1-5):" --- > echo -n "(1-4):" 138,141d97 < exit 1 < fi < if [ $observ_ver = 5 ]; then < remoteagentinstall Tested on a single machine - for now :) Cheers !

2 1

Install script for agent to run without /opt/observium
by Pieter De Wit 30 Sep '18

30 Sep '18

Hey Guys, Would it be possible to add the option do an agent only install to the install script? One that doesn't need /opt/observium and installs all the nice /usr/bin/distro etc utils :) The current script bails on : cp: cannot stat '/opt/observium/scripts/observium_agent_xinetd': No such file or directory Thanks !

2 3

How I did it (?)
by Luca Sasdelli 29 Sep '18

29 Sep '18

Hi all, I've got some multi-WAN firewall checks from outside, and although Observium refuses an already existing SNMP SysName by adding a secondary WAN link, I've got one that has three WANs on the same firewall, without claiming anything. Does it exist a way to add an already existing SysName device, with a different name (and IP)? Thanks! Luca

1 0

remote syslog
by Arnoldo Vidal Bravo 28 Sep '18

28 Sep '18

hi. where i can config a remote storage of syslogs? -- Saluda cordialmente

1 0

Alerting on customer OID
by John Morris 28 Sep '18

28 Sep '18

Hello all Im after some help, I have created custom oid, and these are working and displaying info. I am trying to get the alerts to check the status of the oid. Ive added a custom oid checker Under association, I am selecting device, and the ip of the device. It then shows all the custom oid for the device. I have then tried by adding AND Custom OID numberical oid equals (The oid) [cid:image001.png@01D45723.A78685B0] But then it doesn’t list the custom oid, and shows no associations. Basically it is checking an SBC and if the status is 2, then its active, and if it shows 3 it is in standby. I want to create an alert that if the value changes from 2 to 3 it sends an alert. What am I doing wrong? Many Thanks John Morris Cloud Specialist

3 4

Not able to add checker
by Shekhar Basnet 28 Sep '18

28 Sep '18

Hello, I am trying unsuccessfully to add a checker. I just cannot find a submit button in the add checker page. Am I doing this incorrectly? I have attached a screenshot of the add checker page. My Observium CE version: 18.9.9413 (2nd September 2018) My permission level: THIS USER HAS FULL ADMINISTRATIVE ACCESS Thanks, Shekhar -- DISCLAIMER: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized use or disclosure is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. IRS CIRCULAR 230 DISCLOSURE: Any U.S. tax advice contained in this communication (including any attachments) is not intended or written to be used, and cannot be used, for the purpose of (i) avoiding penalties under the Internal Revenue Code or (ii) promoting, marketing or recommending to another party any transaction or matter addressed herein.(FR08-i203d)

3 3

Customize Graphs on Observium
by Kaustubh Parthasarthy, CLSA 27 Sep '18

27 Sep '18

Hi Team, We were trying to do some customizations on the graphs that generate from Observium. We did find that the graph.php and graph-realtime.php are the 2 scripts which get referenced for plotting graphs. We need to know, how these 2 graphs are being referenced ? Kaustubh Parthasarthy Analyst, Production Management Group D +91 20 6646 8625 | M +91 989 284 4625 | T +91 20 6646 8888 4/F, C-Wing, Panchshil Tech Park-1, Yerawada, Pune 411006, India [:1. Social Media Icons:CLSA_Social Media Icons_linkedin.png]<https://hk.linkedin.com/company/clsa>[:1. Social Media Icons:CLSA_Social Media Icons_twitter.png]<https://twitter.com/clsainsights?lang=en>[:1. Social Media Icons:CLSA_Social Media Icons_youtube.png]<https://www.youtube.com/channel/UC0qWp_lLnOcRYmBlCNQgZKA>[:1. Social Media Icons:CLSA_Social Media Icons_facebook.png]<https://www.facebook.com/clsacommunity/> clsa.com<https://www.clsa.com/> Insights. Liquidity. Capital. [CLSA_RGB]<https://www.clsa.com/member> A CITIC Securities Company The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

4 4

How to set customOID to use 1024 instead of 1000
by Simon Mousey Smith 27 Sep '18

27 Sep '18

Hi All Im trying to find out if its possible to change the conversion rate being used in the CustomOID ? When I SNMPGET a value from our storage system its returning a value and observium is then doing the conversion wrong… This is the reply I received from there support team after hours of me trying to work out why observium was showing 416.5GB and they was showing 387.9GB The command you are using shows result in bytes. At the same time "vstorage stat" command shows result in Gibibites not Gigabytes. Just for reference: 1 Gibibyte = 230 Byte = 1,073,741,824 Byte 1 Gigabyte = 109 Byte = 1,000,000,000 Byte #snmpget -v2c -cpublic 10.10.10.254 .1.3.6.1.4.1.8072.161.1.1.3.0 NET-SNMP-MIB::netSnmp.161.1.1.3.0 = Counter64: 416509057132 Here are output from your cluster: vstorage -c hestor stat | head -n 10 connected to MDS#11 Cluster 'hestor': healthy Space: [OK] allocatable 636.0GB (+2.28TB unlicensed) of 3.74TB, free 636.0GB of 1TB MDS nodes: 7 of 7, epoch uptime: 2d 22h, cluster version: 126 CS nodes: 7 of 7 (7 avail, 0 inactive, 0 offline), storage version: 126 License: [Error] License not loaded, capacity limited to 1024Gb Replication: 1 norm, 1 limit Chunks: [OK] 1767 (100%) healthy, 0 (0%) standby, 0 (0%) degraded, 0 (0%) urgent, 0 (0%) blocked, 0 (0%) pending, 0 (0%) offline, 0 (0%) replicating, 0 (0%) overcommitted, 0 (0%) deleting, 0 (0%) void FS: 387.9GB in 541 files, 541 inodes, 235 file maps, 1767 chunks, 3621 chunk replicas 416509057132/(1024*3) = 387.9 GB which is exactly the same as in "stats" Just for reference: 1 Gibibyte = 230 Byte = 1,073,741,824 Byte 1 Gigabyte = 109 Byte = 1,000,000,000 Byte Regards Simon

4 6

Issues Updating SVN
by Bill Brigden 27 Sep '18

27 Sep '18

Hi, Does anyone else have issues updating? Svn up is giving a domain error - taking a look the hostname svn.observium.org doesn't appear to resolve. Using a basic tool to view the DNS: https://mxtoolbox.com/SuperTool.aspx?action=dns%3aobservium.org&run=toolpage it suggests a number of issues with the glue as well. Cheers,

1 0

Palo Alto Firewall.
by Zafar Pravaiz 27 Sep '18

27 Sep '18

Greetings, I just noticed, after upgrading my PA-5050 palo alto firewall to 8.0.x observium does not show firewall stats, I have another pair PA-5050 on version 7.1.x it only shows Global protect tunnel graph. is there is change ? or I am missing something? Thanks Zafar Pravaiz Senior Network Architect Information Technology Department Tel +971 6 515 2164 Fax +971 6 515 2112 American University of Sharjah PO Box 26666, Sharjah United Arab Emirates http://www.aus.edu <http://www.aus.edu/> zpravaiz(a)aus.edu <mailto:youremail@aus.edu>

2 1

Re: [Observium] Observium Graphs
by Kaustubh Parthasarthy, CLSA 26 Sep '18

26 Sep '18

Hi Team, Can you please assist Regards Kaustubh From: Kaustubh Parthasarthy, CLSA Sent: Tuesday, September 25, 2018 10:27 AM To: Observium Cc: Shivani Shinde, CLSA Subject: Observium Graphs Hi Team, We were looking to find some information on the graphs which observium generates. Could someone please let us know or point us to the right path in the observium database from where we can get info on how the graphs are displayed ? What metrics are used ? etc What is the path where this info is stored ? Regards Kaustubh Parthasarthy Analyst, Production Management Group D +91 20 6646 8625 | M +91 989 284 4625 | T +91 20 6646 8888 4/F, C-Wing, Panchshil Tech Park-1, Yerawada, Pune 411006, India [:1. Social Media Icons:CLSA_Social Media Icons_linkedin.png]<https://hk.linkedin.com/company/clsa>[:1. Social Media Icons:CLSA_Social Media Icons_twitter.png]<https://twitter.com/clsainsights?lang=en>[:1. Social Media Icons:CLSA_Social Media Icons_youtube.png]<https://www.youtube.com/channel/UC0qWp_lLnOcRYmBlCNQgZKA>[:1. Social Media Icons:CLSA_Social Media Icons_facebook.png]<https://www.facebook.com/clsacommunity/> clsa.com<https://www.clsa.com/> Insights. Liquidity. Capital. [CLSA_RGB]<https://www.clsa.com/member> A CITIC Securities Company The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

1 0

Problem with Syslog in Observium
by Paulo Zanette Duzzioni 25 Sep '18

25 Sep '18

HI, I am having problem with Syslog in Observium. Like This: https://jira.observium.org/browse/OBS-2690 Solution shown was install version r9262 ( "Syslog messages parsing improved in r9262.") ("Version r9262 works perfect."). My Observium is Observium CE 18.9.9420 (5th September 2018) How can I solve this problem with syslog? Can someone help me? -- Atenciosamente, Paulo -- Esta mensagem é de uso exclusivo dos citados e contém informação confidencial da Betha Sistemas, sendo seu sigilo protegido por lei e passível de monitoramento. É desautorizada a utilização para outros fins. Caso não seja o destinatário, estão proibidas a leitura, divulgação ou cópia. Neste caso, favor notificar o remetente e apagar esta mensagem.

2 1

Observium Graphs
by Kaustubh Parthasarthy, CLSA 25 Sep '18

25 Sep '18

Hi Team, We were looking to find some information on the graphs which observium generates. Could someone please let us know or point us to the right path in the observium database from where we can get info on how the graphs are displayed ? What metrics are used ? etc What is the path where this info is stored ? Regards Kaustubh Parthasarthy Analyst, Production Management Group D +91 20 6646 8625 | M +91 989 284 4625 | T +91 20 6646 8888 4/F, C-Wing, Panchshil Tech Park-1, Yerawada, Pune 411006, India [:1. Social Media Icons:CLSA_Social Media Icons_linkedin.png]<https://hk.linkedin.com/company/clsa>[:1. Social Media Icons:CLSA_Social Media Icons_twitter.png]<https://twitter.com/clsainsights?lang=en>[:1. Social Media Icons:CLSA_Social Media Icons_youtube.png]<https://www.youtube.com/channel/UC0qWp_lLnOcRYmBlCNQgZKA>[:1. Social Media Icons:CLSA_Social Media Icons_facebook.png]<https://www.facebook.com/clsacommunity/> clsa.com<https://www.clsa.com/> Insights. Liquidity. Capital. [CLSA_RGB]<https://www.clsa.com/member> A CITIC Securities Company The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

1 0

Fwd: Problem with Syslog in Observium
by Paulo Zanette Duzzioni 24 Sep '18

24 Sep '18

Hi, I was able to solve the problem by setting the file's permission. "Enable store RAW syslog lines into logs/debug.log file. Make sure that logs dir and debug.log file have write permission for your syslog server user. For example in Ubuntu rsyslog uses user syslog, add write permission for it: sudo chmod o+w ".$config['log_dir']."/debug.log"; Thanks. Regards, Paulo ---------- Forwarded message --------- From: Paulo Zanette Duzzioni <paulo.duzzioni(a)betha.com.br> Date: sex, 21 de set de 2018 às 09:41 Subject: Problem with Syslog in Observium To: <observium(a)observium.org> I am having problem with Syslog in Observium. Like This: https://jira.observium.org/browse/OBS-2690 Solution shown was install version r9262 ( "Syslog messages parsing improved in r9262.") ("Version r9262 works perfect."). My Observium is Observium CE 18.9.9420 (5th September 2018) How can I solve this problem with syslog? Can someone help me? -- Atenciosamente, Paulo Zanette Duzzioni Analista de Infraestrutura Tecnologia da Informação - TI (48) 3431 0733 - Ramal 4510 Service Desk TI - Ramal 4000 -- Atenciosamente, Paulo Zanette Duzzioni Analista de Infraestrutura Tecnologia da Informação - TI (48) 3431 0733 - Ramal 4510 Service Desk TI - Ramal 4000 -- Esta mensagem é de uso exclusivo dos citados e contém informação confidencial da Betha Sistemas, sendo seu sigilo protegido por lei e passível de monitoramento. É desautorizada a utilização para outros fins. Caso não seja o destinatário, estão proibidas a leitura, divulgação ou cópia. Neste caso, favor notificar o remetente e apagar esta mensagem.

1 0

Custom math function on data of a custom OID
by Peter De Wit 24 Sep '18

24 Sep '18

Hi Guys, We are getting data from the custom OID's and I would like to run a math function on this data before putting it into the DB (some of them are Voltages that need to be divide by 100 to be useful) Here is the patch for what I current do - which is very hacky and not nice: Index: includes/polling/oids.inc.php =================================================================== --- includes/polling/oids.inc.php (revision 9443) +++ includes/polling/oids.inc.php (working copy) @@ -25,6 +25,7 @@ if (is_numeric($value)) { + $value=$value/100; $update_oid = array(); // Init! $update_oid['raw_value'] = $value; $update_oid['timestamp'] = time(); I would like to know, how can I modify the Custom OID "page" to allow 2 fields into the DB: * A drop down that will allow the user to select the math operator or N/A * A value to apply with the math operator I imaging that something like "/" will be loaded into the first field and 100 into the second. Any other suggestions/comments ? Thanks, Pieter

2 2

Re: [Observium] Observium unable to plot graph for device discovered.
by Kaustubh Parthasarthy, CLSA 24 Sep '18

24 Sep '18

The device is discovered but still the graphs are not getting generated: Its been more than 20 mins since the discovery is complete [cid:image002.png@01D45401.BF97BCC0] Can someone assist ? Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Kaustubh Parthasarthy, CLSA Sent: Monday, September 24, 2018 12:16 PM To: Observium Subject: Re: [Observium] Observium unable to discover the device Got the issue. The SNMP community was public in the observium settings. Changed it to as per the device and then was able to discover the device. Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Kaustubh Parthasarthy, CLSA Sent: Monday, September 24, 2018 12:03 PM To: Observium Subject: Re: [Observium] Observium unable to discover the device Hi Markus, I am able to ping the device from Observium: [cid:image003.png@01D45401.BF97BCC0] Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Markus Klock Sent: Monday, September 24, 2018 11:51 AM To: Observium Network Observation System Subject: Re: [Observium] Observium unable to discover the device Are you sure the Observium-server is able to ping the device? This error message means that Observium was not able to get an ICMP-response from the device. Try adding the device from Observium CLI with debug output. /Markus Den mån 24 sep. 2018 kl 08:11 skrev Kaustubh Parthasarthy, CLSA <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>>: Hi Team, I am trying to add a device ZNEQLP206. I have added Observium’s IP and community string on the server’s SNMP file. I can ping the observium server from the device I want to discover and also on the reverse way. But when I try to discover the device I get the following error: [cid:image001.png@01D453FB.79EA9360] The device is not discovering. What can be the issue ? Kaustubh Parthasarthy Analyst, Production Management Group D +91 20 6646 8625 | M +91 989 284 4625 | T +91 20 6646 8888 4/F, C-Wing, Panchshil Tech Park-1, Yerawada, Pune 411006, India [:1. Social Media Icons:CLSA_Social Media Icons_linkedin.png]<https://hk.linkedin.com/company/clsa>[:1. Social Media Icons:CLSA_Social Media Icons_twitter.png]<https://twitter.com/clsainsights?lang=en>[:1. Social Media Icons:CLSA_Social Media Icons_youtube.png]<https://www.youtube.com/channel/UC0qWp_lLnOcRYmBlCNQgZKA>[:1. Social Media Icons:CLSA_Social Media Icons_facebook.png]<https://www.facebook.com/clsacommunity/> clsa.com<https://www.clsa.com/> Insights. Liquidity. Capital. [CLSA_RGB]<https://www.clsa.com/member> A CITIC Securities Company The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment. _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment. The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment. The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

1 0

Observium unable to discover the device
by Kaustubh Parthasarthy, CLSA 24 Sep '18

24 Sep '18

Hi Team, I am trying to add a device ZNEQLP206. I have added Observium's IP and community string on the server's SNMP file. I can ping the observium server from the device I want to discover and also on the reverse way. But when I try to discover the device I get the following error: [cid:image001.png@01D453FB.79EA9360] The device is not discovering. What can be the issue ? Kaustubh Parthasarthy Analyst, Production Management Group D +91 20 6646 8625 | M +91 989 284 4625 | T +91 20 6646 8888 4/F, C-Wing, Panchshil Tech Park-1, Yerawada, Pune 411006, India [:1. Social Media Icons:CLSA_Social Media Icons_linkedin.png]<https://hk.linkedin.com/company/clsa>[:1. Social Media Icons:CLSA_Social Media Icons_twitter.png]<https://twitter.com/clsainsights?lang=en>[:1. Social Media Icons:CLSA_Social Media Icons_youtube.png]<https://www.youtube.com/channel/UC0qWp_lLnOcRYmBlCNQgZKA>[:1. Social Media Icons:CLSA_Social Media Icons_facebook.png]<https://www.facebook.com/clsacommunity/> clsa.com<https://www.clsa.com/> Insights. Liquidity. Capital. [CLSA_RGB]<https://www.clsa.com/member> A CITIC Securities Company The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

2 3

Tracking Interface Flaps in JunOS via ifJnxCarrierTrans (Carrier Transitions)
by Bri Kaszycki 22 Sep '18

22 Sep '18

Hello Observium! We use the subscription edition of Observium, and are wondering if there is a way to track interface flaps over time and alert on them if they breach a certain threshold - similar to what is done with interface errors. JunOS does expose this data through ifJnxCarrierTrans, so tracking it would be feasible however I don't see any entity that currently captures this counter. Can anyone point us in the right direction for how to accomplish this, or is this something we could add as a feature request? Thanks for all the hard work guys, -bri

3 3

Clickatell SMS alerts
by Christian Schmit 21 Sep '18

21 Sep '18

Hi, We are running observium professional edition v.18.9.9428. We want to activate SMS alerting using the Clickatell transport however I cannot find where to enter the Clickatell login and password credentials in observium. I can only enter the recipient phone number and the clickatell API key but no login and password for clicktell. thanks, Chris

3 4

Re: [Observium] snmpbulkwalk vs snmpwalk
by Mike Stupalov 21 Sep '18

21 Sep '18

dlink... who still use this shit. Trouble in (not responded/empty ifDescr): /usr/bin/snmpbulkwalk -t '5' -v2c -c 'public' -Pu -OQUs -m IF-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'dlink.rbs':'161' ifDescr Timeout: No Response from udp:dlink.rbs:161 ifName also empty.. no ways for naming ports. Not sure that this is snmpbulkwalk trouble, try to add in config.php: $config['os']['dlink']['snmp']['nobulk'] = TRUE; Simon Mousey Smith wrote on 19.09.18 17:30: > Attached if full debug log -dd > > > > > > Simon > >> On 18 Sep 2018, at 18:20, Mike Stupalov <mike(a)observium.org >> <mailto:mike@observium.org>> wrote: >> >> pls attach full poller debug (with separate_walk enabled). >> >> Simon Mousey Smith wrote on 18/09/2018 14:04: >>> including: includes/polling/ports.inc.php >>> ##### Module Start: ports ##### >>> >>> SQL[SELECT * FROM `ports` WHERE `device_id` = '50'] >>> SQL RUNTIME[0.00044799s] >>> >>> SQL[SELECT * FROM `entity_attribs` WHERE `device_id` = '50' AND >>> `entity_type` IN ('port')] >>> SQL RUNTIME[0.00025511s] >>> o Caching Oids Used separate data tables snmpwalk and per >>> port snmpget. >>> ifDescr >>> CMD[/usr/bin/snmpbulkwalk -t '5' -v2c -c *** -Pu -OQUs -m IF-MIB -M >>> /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp >>> 'udp':'dlink.rbs':'161' ifDescr] >>> >>> When I switch the separate_walk on, it is still using the snmpbulkwalk >>> >>> I also found this too in the debug debug output >>> >>> ^[[1;44;96m > $attribs^[[0m^[[44;36m >>> /opt/observium/includes/polling/functions.inc.php:484 ^[[0m >>> array( >>> [enable_ports_separate_walk] => string(1) "1" >>> [ports_ignored_count] => string(2) "24" >>> ) >>> >>> Regards >>> >>> Simon >>> >>>> On 18 Sep 2018, at 11:45, Markus Klock <markus(a)best-practice.se >>>> <mailto:markus@best-practice.se>> wrote: >>>> >>>> You can try to go to the device in Observium, properties>modules >>>> and to the right click Enable on separate_walk module. >>>> This will make Observium poll the device with multiple snmpget's >>>> instead of bulkwalk, might be slower polling but should atleast work. >>>> >>>> /Markus >>>> >>>> Den tis 18 sep. 2018 kl 12:27 skrev Simon Mousey Smith >>>> <simonsmith5521(a)gmail.com <mailto:simonsmith5521@gmail.com>>: >>>> >>>> Hi, >>>> >>>> Yes the device is running the latest for its model (from 2016) >>>> however ive even tried there beta (from 2017) and still same >>>> results >>>> >>>> Nothing really must I can do then im guessing? >>>> >>>> Regards >>>> >>>> Simon >>>> >>>>> On 17 Sep 2018, at 18:07, Adam Armstrong <adama(a)memetic.org >>>>> <mailto:adama@memetic.org>> wrote: >>>>> >>>>> They use different SNMP commands. Poor SNMP stacks sometimes >>>>> shit themselves on bulkwalk, especially with high max-rep >>>>> (-Cr) values. >>>>> >>>>> bulkwalk uses GETBULK, which retrieves multiple values in one >>>>> go, reducing time taken to collect the table. >>>>> >>>>> root@zeta:/home/observium/dev# time snmpwalk -v2c -c public >>>>> c1800-a ifTable >> /dev/null >>>>> real 0m16.896s >>>>> user 0m0.016s >>>>> sys 0m0.004s >>>>> >>>>> root@zeta:/home/observium/dev# time snmpbulkwalk -v2c -c >>>>> public c1800-a ifTable >> /dev/null >>>>> real 0m1.708s >>>>> user 0m0.012s >>>>> sys 0m0.000s >>>>> >>>>> root@zeta:/home/observium/dev# time snmpbulkwalk -Cr100 -v2c >>>>> -c public c1800-a ifTable >> /dev/null >>>>> real 0m1.375s >>>>> user 0m0.008s >>>>> sys 0m0.000s >>>>> >>>>> Is this device running the latest firmware? Often these bugs >>>>> appear and disappear between versions. >>>>> >>>>> (incidentally, you can usually spot a shit SNMP stack when >>>>> they include the vendor and/or model name in ifDescr, hah!) >>>>> >>>>> adam. >>>>>> >>>>>> On 2018-09-17 12:29:05, Simon Mousey Smith >>>>>> <simonsmith5521(a)gmail.com <mailto:simonsmith5521@gmail.com>> >>>>>> wrote: >>>>>> >>>>>> Hi, >>>>>> >>>>>> What is the difference between ‘snmpbulkwalk’ and ‘snmpwalk’ ? >>>>>> >>>>>> I have an issue with a D-Link DGS-1100-24 and the ports of SNMP >>>>>> >>>>>> When I manually run the snmpbulkwalk that observium uses, it >>>>>> times out from getting the ifEntry details >>>>>> >>>>>> However if I run snmpwalk, it walks without any issues? >>>>>> >>>>>> Can I change observium to use snmpwalk for this device and >>>>>> the ports? >>>>>> >>>>>> root@observium:~# /usr/bin/snmpbulkwalk -t '5' -v2c -c public >>>>>> -Pu -OQUs -m IF-MIB -M >>>>>> /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp >>>>>> 'udp':'dlink.rbs':'161' ifEntry >>>>>> ifIndex.1 = 1 >>>>>> ifIndex.2 = 2 >>>>>> ifIndex.3 = 3 >>>>>> ifIndex.4 = 4 >>>>>> ifIndex.5 = 5 >>>>>> ifIndex.6 = 6 >>>>>> ifIndex.7 = 7 >>>>>> ifIndex.8 = 8 >>>>>> ifIndex.9 = 9 >>>>>> ifIndex.10 = 10 >>>>>> ifIndex.11 = 11 >>>>>> ifIndex.12 = 12 >>>>>> ifIndex.13 = 13 >>>>>> ifIndex.14 = 14 >>>>>> ifIndex.15 = 15 >>>>>> ifIndex.16 = 16 >>>>>> ifIndex.17 = 17 >>>>>> ifIndex.18 = 18 >>>>>> ifIndex.19 = 19 >>>>>> ifIndex.20 = 20 >>>>>> ifIndex.21 = 21 >>>>>> ifIndex.22 = 22 >>>>>> ifIndex.23 = 23 >>>>>> ifIndex.24 = 24 >>>>>> ifDescr.1 = D-Link Corporation DGS-1100-24 1.01.018 Port 1 >>>>>> ifDescr.2 = D-Link Corporation DGS-1100-24 1.01.018 Port 2 >>>>>> ifDescr.3 = D-Link Corporation DGS-1100-24 1.01.018 Port 3 >>>>>> ifDescr.4 = D-Link Corporation DGS-1100-24 1.01.018 Port 4 >>>>>> ifDescr.5 = D-Link Corporation DGS-1100-24 1.01.018 Port 5 >>>>>> ifDescr.6 = D-Link Corporation DGS-1100-24 1.01.018 Port 6 >>>>>> Timeout: No Response from udp:dlink.rbs:161 >>>>>> >>>>>> root@observium:~# /usr/bin/snmpwalk -t '5' -v2c -c public -Pu >>>>>> -OQUs -m IF-MIB -M >>>>>> /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp >>>>>> 'udp':'dlink.rbs':'161' ifEntry >>>>>> ifIndex.1 = 1 >>>>>> ifIndex.2 = 2 >>>>>> ifIndex.3 = 3 >>>>>> ifIndex.4 = 4 >>>>>> ifIndex.5 = 5 >>>>>> ifIndex.6 = 6 >>>>>> ifIndex.7 = 7 >>>>>> ifIndex.8 = 8 >>>>>> ifIndex.9 = 9 >>>>>> ifIndex.10 = 10 >>>>>> ifIndex.11 = 11 >>>>>> ifIndex.12 = 12 >>>>>> ifIndex.13 = 13 >>>>>> ifIndex.14 = 14 >>>>>> ifIndex.15 = 15 >>>>>> ifIndex.16 = 16 >>>>>> ifIndex.17 = 17 >>>>>> ifIndex.18 = 18 >>>>>> ifIndex.19 = 19 >>>>>> ifIndex.20 = 20 >>>>>> ifIndex.21 = 21 >>>>>> ifIndex.22 = 22 >>>>>> ifIndex.23 = 23 >>>>>> ifIndex.24 = 24 >>>>>> ifDescr.1 = D-Link Corporation DGS-1100-24 1.01.018 Port 1 >>>>>> ifDescr.2 = D-Link Corporation DGS-1100-24 1.01.018 Port 2 >>>>>> ifDescr.3 = D-Link Corporation DGS-1100-24 1.01.018 Port 3 >>>>>> ifDescr.4 = D-Link Corporation DGS-1100-24 1.01.018 Port 4 >>>>>> ifDescr.5 = D-Link Corporation DGS-1100-24 1.01.018 Port 5 >>>>>> ifDescr.6 = D-Link Corporation DGS-1100-24 1.01.018 Port 6 >>>>>> ifDescr.7 = D-Link Corporation DGS-1100-24 1.01.018 Port 7 >>>>>> ifDescr.8 = D-Link Corporation DGS-1100-24 1.01.018 Port 8 >>>>>> ifDescr.9 = D-Link Corporation DGS-1100-24 1.01.018 Port 9 >>>>>> ifDescr.10 = D-Link Corporation DGS-1100-24 1.01.018 Port 10 >>>>>> ifDescr.11 = D-Link Corporation DGS-1100-24 1.01.018 Port 11 >>>>>> ifDescr.12 = D-Link Corporation DGS-1100-24 1.01.018 Port 12 >>>>>> ifDescr.13 = D-Link Corporation DGS-1100-24 1.01.018 Port 13 >>>>>> ifDescr.14 = D-Link Corporation DGS-1100-24 1.01.018 Port 14 >>>>>> ifDescr.15 = D-Link Corporation DGS-1100-24 1.01.018 Port 15 >>>>>> ifDescr.16 = D-Link Corporation DGS-1100-24 1.01.018 Port 16 >>>>>> ifDescr.17 = D-Link Corporation DGS-1100-24 1.01.018 Port 17 >>>>>> ifDescr.18 = D-Link Corporation DGS-1100-24 1.01.018 Port 18 >>>>>> ifDescr.19 = D-Link Corporation DGS-1100-24 1.01.018 Port 19 >>>>>> ifDescr.20 = D-Link Corporation DGS-1100-24 1.01.018 Port 20 >>>>>> ifDescr.21 = D-Link Corporation DGS-1100-24 1.01.018 Port 21 >>>>>> ifDescr.22 = D-Link Corporation DGS-1100-24 1.01.018 Port 22 >>>>>> ifDescr.23 = D-Link Corporation DGS-1100-24 1.01.018 Port 23 >>>>>> ifDescr.24 = D-Link Corporation DGS-1100-24 1.01.018 Port 24 >>>>>> ifType.1 = ethernetCsmacd >>>>>> ifType.2 = ethernetCsmacd >>>>>> ifType.3 = ethernetCsmacd >>>>>> ifType.4 = ethernetCsmacd >>>>>> ifType.5 = ethernetCsmacd >>>>>> ifType.6 = ethernetCsmacd >>>>>> ifType.7 = ethernetCsmacd >>>>>> ifType.8 = ethernetCsmacd >>>>>> ifType.9 = ethernetCsmacd >>>>>> ifType.10 = ethernetCsmacd >>>>>> ifType.11 = ethernetCsmacd >>>>>> ifType.12 = ethernetCsmacd >>>>>> ifType.13 = ethernetCsmacd >>>>>> ifType.14 = ethernetCsmacd >>>>>> ifType.15 = ethernetCsmacd >>>>>> ifType.16 = ethernetCsmacd >>>>>> ifType.17 = ethernetCsmacd >>>>>> ifType.18 = ethernetCsmacd >>>>>> ifType.19 = ethernetCsmacd >>>>>> ifType.20 = ethernetCsmacd >>>>>> ifType.21 = ethernetCsmacd >>>>>> ifType.22 = ethernetCsmacd >>>>>> ifType.23 = ethernetCsmacd >>>>>> ifType.24 = ethernetCsmacd >>>>>> ifMtu.1 = 1522 >>>>>> ifMtu.2 = 1522 >>>>>> ifMtu.3 = 1522 >>>>>> ifMtu.4 = 1522 >>>>>> ifMtu.5 = 1522 >>>>>> ifMtu.6 = 1522 >>>>>> ifMtu.7 = 1522 >>>>>> ifMtu.8 = 1522 >>>>>> ifMtu.9 = 1522 >>>>>> ifMtu.10 = 1522 >>>>>> ifMtu.11 = 1522 >>>>>> ifMtu.12 = 1522 >>>>>> ifMtu.13 = 1522 >>>>>> ifMtu.14 = 1522 >>>>>> ifMtu.15 = 1522 >>>>>> ifMtu.16 = 1522 >>>>>> ifMtu.17 = 1522 >>>>>> ifMtu.18 = 1522 >>>>>> ifMtu.19 = 1522 >>>>>> ifMtu.20 = 1522 >>>>>> ifMtu.21 = 1522 >>>>>> ifMtu.22 = 1522 >>>>>> ifMtu.23 = 1522 >>>>>> ifMtu.24 = 1522 >>>>>> ifSpeed.1 = 100000000 >>>>>> ifSpeed.2 = 0 >>>>>> ifSpeed.3 = 0 >>>>>> ifSpeed.4 = 0 >>>>>> ifSpeed.5 = 0 >>>>>> ifSpeed.6 = 0 >>>>>> ifSpeed.7 = 0 >>>>>> ifSpeed.8 = 0 >>>>>> ifSpeed.9 = 0 >>>>>> ifSpeed.10 = 0 >>>>>> ifSpeed.11 = 0 >>>>>> ifSpeed.12 = 0 >>>>>> ifSpeed.13 = 0 >>>>>> ifSpeed.14 = 0 >>>>>> ifSpeed.15 = 0 >>>>>> ifSpeed.16 = 0 >>>>>> ifSpeed.17 = 0 >>>>>> ifSpeed.18 = 0 >>>>>> ifSpeed.19 = 0 >>>>>> ifSpeed.20 = 0 >>>>>> ifSpeed.21 = 0 >>>>>> ifSpeed.22 = 0 >>>>>> ifSpeed.23 = 0 >>>>>> ifSpeed.24 = 0 >>>>>> ifPhysAddress.1 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.2 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.3 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.4 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.5 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.6 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.7 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.8 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.9 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.10 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.11 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.12 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.13 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.14 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.15 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.16 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.17 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.18 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.19 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.20 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.21 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.22 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.23 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.24 = ec:22:80:40:3c:6 >>>>>> ifAdminStatus.1 = up >>>>>> ifAdminStatus.2 = up >>>>>> ifAdminStatus.3 = up >>>>>> ifAdminStatus.4 = up >>>>>> ifAdminStatus.5 = up >>>>>> ifAdminStatus.6 = up >>>>>> ifAdminStatus.7 = up >>>>>> ifAdminStatus.8 = up >>>>>> ifAdminStatus.9 = up >>>>>> ifAdminStatus.10 = up >>>>>> ifAdminStatus.11 = up >>>>>> ifAdminStatus.12 = up >>>>>> ifAdminStatus.13 = up >>>>>> ifAdminStatus.14 = up >>>>>> ifAdminStatus.15 = up >>>>>> ifAdminStatus.16 = up >>>>>> ifAdminStatus.17 = up >>>>>> ifAdminStatus.18 = up >>>>>> ifAdminStatus.19 = up >>>>>> ifAdminStatus.20 = up >>>>>> ifAdminStatus.21 = up >>>>>> ifAdminStatus.22 = up >>>>>> ifAdminStatus.23 = up >>>>>> ifAdminStatus.24 = up >>>>>> ifOperStatus.1 = up >>>>>> ifOperStatus.2 = down >>>>>> ifOperStatus.3 = down >>>>>> ifOperStatus.4 = down >>>>>> ifOperStatus.5 = down >>>>>> ifOperStatus.6 = down >>>>>> ifOperStatus.7 = down >>>>>> ifOperStatus.8 = down >>>>>> ifOperStatus.9 = down >>>>>> ifOperStatus.10 = down >>>>>> ifOperStatus.11 = down >>>>>> ifOperStatus.12 = down >>>>>> ifOperStatus.13 = down >>>>>> ifOperStatus.14 = down >>>>>> ifOperStatus.15 = down >>>>>> ifOperStatus.16 = down >>>>>> ifOperStatus.17 = down >>>>>> ifOperStatus.18 = down >>>>>> ifOperStatus.19 = down >>>>>> ifOperStatus.20 = down >>>>>> ifOperStatus.21 = down >>>>>> ifOperStatus.22 = down >>>>>> ifOperStatus.23 = down >>>>>> ifOperStatus.24 = down >>>>>> ifLastChange.1 = 0:0:00:00.00 >>>>>> ifLastChange.2 = 0:0:00:00.00 >>>>>> ifLastChange.3 = 0:0:00:00.00 >>>>>> ifLastChange.4 = 0:0:00:00.00 >>>>>> ifLastChange.5 = 0:0:00:00.00 >>>>>> ifLastChange.6 = 0:0:00:00.00 >>>>>> ifLastChange.7 = 0:0:00:00.00 >>>>>> ifLastChange.8 = 0:0:00:00.00 >>>>>> ifLastChange.9 = 0:0:00:00.00 >>>>>> ifLastChange.10 = 0:0:00:00.00 >>>>>> ifLastChange.11 = 0:0:00:00.00 >>>>>> ifLastChange.12 = 0:0:00:00.00 >>>>>> ifLastChange.13 = 0:0:00:00.00 >>>>>> ifLastChange.14 = 0:0:00:00.00 >>>>>> ifLastChange.15 = 0:0:00:00.00 >>>>>> ifLastChange.16 = 0:0:00:00.00 >>>>>> ifLastChange.17 = 0:0:00:00.00 >>>>>> ifLastChange.18 = 0:0:00:00.00 >>>>>> ifLastChange.19 = 0:0:00:00.00 >>>>>> ifLastChange.20 = 0:0:00:00.00 >>>>>> ifLastChange.21 = 0:0:00:00.00 >>>>>> ifLastChange.22 = 0:0:00:00.00 >>>>>> ifLastChange.23 = 0:0:00:00.00 >>>>>> ifLastChange.24 = 0:0:00:00.00 >>>>>> ifInOctets.1 = 2260563 >>>>>> ifInOctets.2 = 0 >>>>>> ifInOctets.3 = 0 >>>>>> ifInOctets.4 = 0 >>>>>> ifInOctets.5 = 0 >>>>>> ifInOctets.6 = 0 >>>>>> ifInOctets.7 = 0 >>>>>> ifInOctets.8 = 75140 >>>>>> ifInOctets.9 = 0 >>>>>> ifInOctets.10 = 0 >>>>>> ifInOctets.11 = 0 >>>>>> ifInOctets.12 = 0 >>>>>> ifInOctets.13 = 0 >>>>>> ifInOctets.14 = 0 >>>>>> ifInOctets.15 = 0 >>>>>> ifInOctets.16 = 0 >>>>>> ifInOctets.17 = 179128 >>>>>> ifInOctets.18 = 0 >>>>>> ifInOctets.19 = 0 >>>>>> ifInOctets.20 = 0 >>>>>> ifInOctets.21 = 0 >>>>>> ifInOctets.22 = 0 >>>>>> ifInOctets.23 = 0 >>>>>> ifInOctets.24 = 0 >>>>>> ifInUcastPkts.1 = 10964 >>>>>> ifInUcastPkts.2 = 0 >>>>>> ifInUcastPkts.3 = 0 >>>>>> ifInUcastPkts.4 = 0 >>>>>> ifInUcastPkts.5 = 0 >>>>>> ifInUcastPkts.6 = 0 >>>>>> ifInUcastPkts.7 = 0 >>>>>> ifInUcastPkts.8 = 167 >>>>>> ifInUcastPkts.9 = 0 >>>>>> ifInUcastPkts.10 = 0 >>>>>> ifInUcastPkts.11 = 0 >>>>>> ifInUcastPkts.12 = 0 >>>>>> ifInUcastPkts.13 = 0 >>>>>> ifInUcastPkts.14 = 0 >>>>>> ifInUcastPkts.15 = 0 >>>>>> ifInUcastPkts.16 = 0 >>>>>> ifInUcastPkts.17 = 353 >>>>>> ifInUcastPkts.18 = 0 >>>>>> ifInUcastPkts.19 = 0 >>>>>> ifInUcastPkts.20 = 0 >>>>>> ifInUcastPkts.21 = 0 >>>>>> ifInUcastPkts.22 = 0 >>>>>> ifInUcastPkts.23 = 0 >>>>>> ifInUcastPkts.24 = 0 >>>>>> ifInNUcastPkts.1 = 9051 >>>>>> ifInNUcastPkts.2 = 0 >>>>>> ifInNUcastPkts.3 = 0 >>>>>> ifInNUcastPkts.4 = 0 >>>>>> ifInNUcastPkts.5 = 0 >>>>>> ifInNUcastPkts.6 = 0 >>>>>> ifInNUcastPkts.7 = 0 >>>>>> ifInNUcastPkts.8 = 587 >>>>>> ifInNUcastPkts.9 = 0 >>>>>> ifInNUcastPkts.10 = 0 >>>>>> ifInNUcastPkts.11 = 0 >>>>>> ifInNUcastPkts.12 = 0 >>>>>> ifInNUcastPkts.13 = 0 >>>>>> ifInNUcastPkts.14 = 0 >>>>>> ifInNUcastPkts.15 = 0 >>>>>> ifInNUcastPkts.16 = 0 >>>>>> ifInNUcastPkts.17 = 182 >>>>>> ifInNUcastPkts.18 = 0 >>>>>> ifInNUcastPkts.19 = 0 >>>>>> ifInNUcastPkts.20 = 0 >>>>>> ifInNUcastPkts.21 = 0 >>>>>> ifInNUcastPkts.22 = 0 >>>>>> ifInNUcastPkts.23 = 0 >>>>>> ifInNUcastPkts.24 = 0 >>>>>> ifInDiscards.1 = 0 >>>>>> ifInDiscards.2 = 0 >>>>>> ifInDiscards.3 = 0 >>>>>> ifInDiscards.4 = 0 >>>>>> ifInDiscards.5 = 0 >>>>>> ifInDiscards.6 = 0 >>>>>> ifInDiscards.7 = 0 >>>>>> ifInDiscards.8 = 0 >>>>>> ifInDiscards.9 = 0 >>>>>> ifInDiscards.10 = 0 >>>>>> ifInDiscards.11 = 0 >>>>>> ifInDiscards.12 = 0 >>>>>> ifInDiscards.13 = 0 >>>>>> ifInDiscards.14 = 0 >>>>>> ifInDiscards.15 = 0 >>>>>> ifInDiscards.16 = 0 >>>>>> ifInDiscards.17 = 0 >>>>>> ifInDiscards.18 = 0 >>>>>> ifInDiscards.19 = 0 >>>>>> ifInDiscards.20 = 0 >>>>>> ifInDiscards.21 = 0 >>>>>> ifInDiscards.22 = 0 >>>>>> ifInDiscards.23 = 0 >>>>>> ifInDiscards.24 = 0 >>>>>> ifInErrors.1 = 0 >>>>>> ifInErrors.2 = 0 >>>>>> ifInErrors.3 = 0 >>>>>> ifInErrors.4 = 0 >>>>>> ifInErrors.5 = 0 >>>>>> ifInErrors.6 = 0 >>>>>> ifInErrors.7 = 0 >>>>>> ifInErrors.8 = 0 >>>>>> ifInErrors.9 = 0 >>>>>> ifInErrors.10 = 0 >>>>>> ifInErrors.11 = 0 >>>>>> ifInErrors.12 = 0 >>>>>> ifInErrors.13 = 0 >>>>>> ifInErrors.14 = 0 >>>>>> ifInErrors.15 = 0 >>>>>> ifInErrors.16 = 0 >>>>>> ifInErrors.17 = 0 >>>>>> ifInErrors.18 = 0 >>>>>> ifInErrors.19 = 0 >>>>>> ifInErrors.20 = 0 >>>>>> ifInErrors.21 = 0 >>>>>> ifInErrors.22 = 0 >>>>>> ifInErrors.23 = 0 >>>>>> ifInErrors.24 = 0 >>>>>> ifInUnknownProtos.1 = 0 >>>>>> ifInUnknownProtos.2 = 0 >>>>>> ifInUnknownProtos.3 = 0 >>>>>> ifInUnknownProtos.4 = 0 >>>>>> ifInUnknownProtos.5 = 0 >>>>>> ifInUnknownProtos.6 = 0 >>>>>> ifInUnknownProtos.7 = 0 >>>>>> ifInUnknownProtos.8 = 0 >>>>>> ifInUnknownProtos.9 = 0 >>>>>> ifInUnknownProtos.10 = 0 >>>>>> ifInUnknownProtos.11 = 0 >>>>>> ifInUnknownProtos.12 = 0 >>>>>> ifInUnknownProtos.13 = 0 >>>>>> ifInUnknownProtos.14 = 0 >>>>>> ifInUnknownProtos.15 = 0 >>>>>> ifInUnknownProtos.16 = 0 >>>>>> ifInUnknownProtos.17 = 0 >>>>>> ifInUnknownProtos.18 = 0 >>>>>> ifInUnknownProtos.19 = 0 >>>>>> ifInUnknownProtos.20 = 0 >>>>>> ifInUnknownProtos.21 = 0 >>>>>> ifInUnknownProtos.22 = 0 >>>>>> ifInUnknownProtos.23 = 0 >>>>>> ifInUnknownProtos.24 = 0 >>>>>> ifOutOctets.1 = 2033497 >>>>>> ifOutOctets.2 = 0 >>>>>> ifOutOctets.3 = 0 >>>>>> ifOutOctets.4 = 0 >>>>>> ifOutOctets.5 = 0 >>>>>> ifOutOctets.6 = 0 >>>>>> ifOutOctets.7 = 0 >>>>>> ifOutOctets.8 = 0 >>>>>> ifOutOctets.9 = 0 >>>>>> ifOutOctets.10 = 0 >>>>>> ifOutOctets.11 = 0 >>>>>> ifOutOctets.12 = 0 >>>>>> ifOutOctets.13 = 0 >>>>>> ifOutOctets.14 = 0 >>>>>> ifOutOctets.15 = 0 >>>>>> ifOutOctets.16 = 0 >>>>>> ifOutOctets.17 = 265264 >>>>>> ifOutOctets.18 = 0 >>>>>> ifOutOctets.19 = 0 >>>>>> ifOutOctets.20 = 0 >>>>>> ifOutOctets.21 = 0 >>>>>> ifOutOctets.22 = 0 >>>>>> ifOutOctets.23 = 0 >>>>>> ifOutOctets.24 = 0 >>>>>> ifOutUcastPkts.1 = 10212 >>>>>> ifOutUcastPkts.2 = 0 >>>>>> ifOutUcastPkts.3 = 0 >>>>>> ifOutUcastPkts.4 = 0 >>>>>> ifOutUcastPkts.5 = 0 >>>>>> ifOutUcastPkts.6 = 0 >>>>>> ifOutUcastPkts.7 = 0 >>>>>> ifOutUcastPkts.8 = 0 >>>>>> ifOutUcastPkts.9 = 0 >>>>>> ifOutUcastPkts.10 = 0 >>>>>> ifOutUcastPkts.11 = 0 >>>>>> ifOutUcastPkts.12 = 0 >>>>>> ifOutUcastPkts.13 = 0 >>>>>> ifOutUcastPkts.14 = 0 >>>>>> ifOutUcastPkts.15 = 0 >>>>>> ifOutUcastPkts.16 = 0 >>>>>> ifOutUcastPkts.17 = 308 >>>>>> ifOutUcastPkts.18 = 0 >>>>>> ifOutUcastPkts.19 = 0 >>>>>> ifOutUcastPkts.20 = 0 >>>>>> ifOutUcastPkts.21 = 0 >>>>>> ifOutUcastPkts.22 = 0 >>>>>> ifOutUcastPkts.23 = 0 >>>>>> ifOutUcastPkts.24 = 0 >>>>>> ifOutNUcastPkts.1 = 8 >>>>>> ifOutNUcastPkts.2 = 0 >>>>>> ifOutNUcastPkts.3 = 0 >>>>>> ifOutNUcastPkts.4 = 0 >>>>>> ifOutNUcastPkts.5 = 0 >>>>>> ifOutNUcastPkts.6 = 0 >>>>>> ifOutNUcastPkts.7 = 0 >>>>>> ifOutNUcastPkts.8 = 0 >>>>>> ifOutNUcastPkts.9 = 0 >>>>>> ifOutNUcastPkts.10 = 0 >>>>>> ifOutNUcastPkts.11 = 0 >>>>>> ifOutNUcastPkts.12 = 0 >>>>>> ifOutNUcastPkts.13 = 0 >>>>>> ifOutNUcastPkts.14 = 0 >>>>>> ifOutNUcastPkts.15 = 0 >>>>>> ifOutNUcastPkts.16 = 0 >>>>>> ifOutNUcastPkts.17 = 5 >>>>>> ifOutNUcastPkts.18 = 0 >>>>>> ifOutNUcastPkts.19 = 0 >>>>>> ifOutNUcastPkts.20 = 0 >>>>>> ifOutNUcastPkts.21 = 0 >>>>>> ifOutNUcastPkts.22 = 0 >>>>>> ifOutNUcastPkts.23 = 0 >>>>>> ifOutNUcastPkts.24 = 0 >>>>>> ifOutDiscards.1 = 0 >>>>>> ifOutDiscards.2 = 0 >>>>>> ifOutDiscards.3 = 0 >>>>>> ifOutDiscards.4 = 0 >>>>>> ifOutDiscards.5 = 0 >>>>>> ifOutDiscards.6 = 0 >>>>>> ifOutDiscards.7 = 0 >>>>>> ifOutDiscards.8 = 0 >>>>>> ifOutDiscards.9 = 0 >>>>>> ifOutDiscards.10 = 0 >>>>>> ifOutDiscards.11 = 0 >>>>>> ifOutDiscards.12 = 0 >>>>>> ifOutDiscards.13 = 0 >>>>>> ifOutDiscards.14 = 0 >>>>>> ifOutDiscards.15 = 0 >>>>>> ifOutDiscards.16 = 0 >>>>>> ifOutDiscards.17 = 0 >>>>>> ifOutDiscards.18 = 0 >>>>>> ifOutDiscards.19 = 0 >>>>>> ifOutDiscards.20 = 0 >>>>>> ifOutDiscards.21 = 0 >>>>>> ifOutDiscards.22 = 0 >>>>>> ifOutDiscards.23 = 0 >>>>>> ifOutDiscards.24 = 0 >>>>>> ifOutErrors.1 = 0 >>>>>> ifOutErrors.2 = 0 >>>>>> ifOutErrors.3 = 0 >>>>>> ifOutErrors.4 = 0 >>>>>> ifOutErrors.5 = 0 >>>>>> ifOutErrors.6 = 0 >>>>>> ifOutErrors.7 = 0 >>>>>> ifOutErrors.8 = 0 >>>>>> ifOutErrors.9 = 0 >>>>>> ifOutErrors.10 = 0 >>>>>> ifOutErrors.11 = 0 >>>>>> ifOutErrors.12 = 0 >>>>>> ifOutErrors.13 = 0 >>>>>> ifOutErrors.14 = 0 >>>>>> ifOutErrors.15 = 0 >>>>>> ifOutErrors.16 = 0 >>>>>> ifOutErrors.17 = 0 >>>>>> ifOutErrors.18 = 0 >>>>>> ifOutErrors.19 = 0 >>>>>> ifOutErrors.20 = 0 >>>>>> ifOutErrors.21 = 0 >>>>>> ifOutErrors.22 = 0 >>>>>> ifOutErrors.23 = 0 >>>>>> ifOutErrors.24 = 0 >>>>>> ifOutQLen.1 = 0 >>>>>> ifOutQLen.2 = 0 >>>>>> ifOutQLen.3 = 0 >>>>>> ifOutQLen.4 = 0 >>>>>> ifOutQLen.5 = 0 >>>>>> ifOutQLen.6 = 0 >>>>>> ifOutQLen.7 = 0 >>>>>> ifOutQLen.8 = 0 >>>>>> ifOutQLen.9 = 0 >>>>>> ifOutQLen.10 = 0 >>>>>> ifOutQLen.11 = 0 >>>>>> ifOutQLen.12 = 0 >>>>>> ifOutQLen.13 = 0 >>>>>> ifOutQLen.14 = 0 >>>>>> ifOutQLen.15 = 0 >>>>>> ifOutQLen.16 = 0 >>>>>> ifOutQLen.17 = 0 >>>>>> ifOutQLen.18 = 0 >>>>>> ifOutQLen.19 = 0 >>>>>> ifOutQLen.20 = 0 >>>>>> ifOutQLen.21 = 0 >>>>>> ifOutQLen.22 = 0 >>>>>> ifOutQLen.23 = 0 >>>>>> ifOutQLen.24 = 0 >>>>>> ifSpecific.1 = zeroDotZero >>>>>> ifSpecific.2 = zeroDotZero >>>>>> ifSpecific.3 = zeroDotZero >>>>>> ifSpecific.4 = zeroDotZero >>>>>> ifSpecific.5 = zeroDotZero >>>>>> ifSpecific.6 = zeroDotZero >>>>>> ifSpecific.7 = zeroDotZero >>>>>> ifSpecific.8 = zeroDotZero >>>>>> ifSpecific.9 = zeroDotZero >>>>>> ifSpecific.10 = zeroDotZero >>>>>> ifSpecific.11 = zeroDotZero >>>>>> ifSpecific.12 = zeroDotZero >>>>>> ifSpecific.13 = zeroDotZero >>>>>> ifSpecific.14 = zeroDotZero >>>>>> ifSpecific.15 = zeroDotZero >>>>>> ifSpecific.16 = zeroDotZero >>>>>> ifSpecific.17 = zeroDotZero >>>>>> ifSpecific.18 = zeroDotZero >>>>>> ifSpecific.19 = zeroDotZero >>>>>> ifSpecific.20 = zeroDotZero >>>>>> ifSpecific.21 = zeroDotZero >>>>>> ifSpecific.22 = zeroDotZero >>>>>> ifSpecific.23 = zeroDotZero >>>>>> ifSpecific.24 = zeroDotZero >>>>>> root@observium:~# >>>>>> >>>>>> Regards >>>>>> >>>>>> Simon >>>>>> _______________________________________________ >>>>>> observium mailing list >>>>>> observium(a)observium.org <mailto:observium@observium.org> >>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>> _______________________________________________ >>>>> observium mailing list >>>>> observium(a)observium.org <mailto:observium@observium.org> >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org <mailto:observium@observium.org> >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org <mailto:observium@observium.org> >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> -- >> Mike Stupalov >> Observium Limited, http://observium.org >> > -- Mike Stupalov Observium Limited, http://observium.org

2 1

Disabling alerts during maintenance
by Erdem HAKI 20 Sep '18

20 Sep '18

Hello, What is the best/easy way disabling all alerts during the maintenance window if we don't want to get tons of alerts? Best

2 1

Adding device support...
by Ron Marosko 19 Sep '18

19 Sep '18

Howdy Mike/Adam, I opened a new ticket 2775 to add some additional device support (patches included), and discovered that an older ticket 2517 (patch included also) is still open too. Any possibility to get those merged into the rolling release? Regards, Ron -- Ron Marosko, Jr. . . . . . . . . . . . . . . . . . . . . . . . . . . CCIE No. 4526 (R/S), NN5DX Senior Network Engineer RJR Services, Inc. 1108 West Dickinson Blvd, Suite A Fort Stockton, TX 79735 USA o: +1 432 336 5600 x115 c: +1 432 290 6344 e: <mailto:ron@rjr-services.com> ron(a)rjr-services.com pgp pubkey: <http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x778B3B0258AB8B5C> 0x58AB8B5C "To know me is to fly with me." -- This message has been scanned by E.F.A. Project and is believed to be clean.

1 0

check disk I/O on windows
by Andi Felani 18 Sep '18

18 Sep '18

hi all, how to check disk I/O on windows ? anybody can help me?

2 1

snmpbulkwalk vs snmpwalk
by Simon Mousey Smith 18 Sep '18

18 Sep '18

Hi, What is the difference between ‘snmpbulkwalk’ and ‘snmpwalk’ ? I have an issue with a D-Link DGS-1100-24 and the ports of SNMP When I manually run the snmpbulkwalk that observium uses, it times out from getting the ifEntry details However if I run snmpwalk, it walks without any issues? Can I change observium to use snmpwalk for this device and the ports? root@observium:~# /usr/bin/snmpbulkwalk -t '5' -v2c -c public -Pu -OQUs -m IF-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'dlink.rbs':'161' ifEntry ifIndex.1 = 1 ifIndex.2 = 2 ifIndex.3 = 3 ifIndex.4 = 4 ifIndex.5 = 5 ifIndex.6 = 6 ifIndex.7 = 7 ifIndex.8 = 8 ifIndex.9 = 9 ifIndex.10 = 10 ifIndex.11 = 11 ifIndex.12 = 12 ifIndex.13 = 13 ifIndex.14 = 14 ifIndex.15 = 15 ifIndex.16 = 16 ifIndex.17 = 17 ifIndex.18 = 18 ifIndex.19 = 19 ifIndex.20 = 20 ifIndex.21 = 21 ifIndex.22 = 22 ifIndex.23 = 23 ifIndex.24 = 24 ifDescr.1 = D-Link Corporation DGS-1100-24 1.01.018 Port 1 ifDescr.2 = D-Link Corporation DGS-1100-24 1.01.018 Port 2 ifDescr.3 = D-Link Corporation DGS-1100-24 1.01.018 Port 3 ifDescr.4 = D-Link Corporation DGS-1100-24 1.01.018 Port 4 ifDescr.5 = D-Link Corporation DGS-1100-24 1.01.018 Port 5 ifDescr.6 = D-Link Corporation DGS-1100-24 1.01.018 Port 6 Timeout: No Response from udp:dlink.rbs:161 root@observium:~# /usr/bin/snmpwalk -t '5' -v2c -c public -Pu -OQUs -m IF-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'dlink.rbs':'161' ifEntry ifIndex.1 = 1 ifIndex.2 = 2 ifIndex.3 = 3 ifIndex.4 = 4 ifIndex.5 = 5 ifIndex.6 = 6 ifIndex.7 = 7 ifIndex.8 = 8 ifIndex.9 = 9 ifIndex.10 = 10 ifIndex.11 = 11 ifIndex.12 = 12 ifIndex.13 = 13 ifIndex.14 = 14 ifIndex.15 = 15 ifIndex.16 = 16 ifIndex.17 = 17 ifIndex.18 = 18 ifIndex.19 = 19 ifIndex.20 = 20 ifIndex.21 = 21 ifIndex.22 = 22 ifIndex.23 = 23 ifIndex.24 = 24 ifDescr.1 = D-Link Corporation DGS-1100-24 1.01.018 Port 1 ifDescr.2 = D-Link Corporation DGS-1100-24 1.01.018 Port 2 ifDescr.3 = D-Link Corporation DGS-1100-24 1.01.018 Port 3 ifDescr.4 = D-Link Corporation DGS-1100-24 1.01.018 Port 4 ifDescr.5 = D-Link Corporation DGS-1100-24 1.01.018 Port 5 ifDescr.6 = D-Link Corporation DGS-1100-24 1.01.018 Port 6 ifDescr.7 = D-Link Corporation DGS-1100-24 1.01.018 Port 7 ifDescr.8 = D-Link Corporation DGS-1100-24 1.01.018 Port 8 ifDescr.9 = D-Link Corporation DGS-1100-24 1.01.018 Port 9 ifDescr.10 = D-Link Corporation DGS-1100-24 1.01.018 Port 10 ifDescr.11 = D-Link Corporation DGS-1100-24 1.01.018 Port 11 ifDescr.12 = D-Link Corporation DGS-1100-24 1.01.018 Port 12 ifDescr.13 = D-Link Corporation DGS-1100-24 1.01.018 Port 13 ifDescr.14 = D-Link Corporation DGS-1100-24 1.01.018 Port 14 ifDescr.15 = D-Link Corporation DGS-1100-24 1.01.018 Port 15 ifDescr.16 = D-Link Corporation DGS-1100-24 1.01.018 Port 16 ifDescr.17 = D-Link Corporation DGS-1100-24 1.01.018 Port 17 ifDescr.18 = D-Link Corporation DGS-1100-24 1.01.018 Port 18 ifDescr.19 = D-Link Corporation DGS-1100-24 1.01.018 Port 19 ifDescr.20 = D-Link Corporation DGS-1100-24 1.01.018 Port 20 ifDescr.21 = D-Link Corporation DGS-1100-24 1.01.018 Port 21 ifDescr.22 = D-Link Corporation DGS-1100-24 1.01.018 Port 22 ifDescr.23 = D-Link Corporation DGS-1100-24 1.01.018 Port 23 ifDescr.24 = D-Link Corporation DGS-1100-24 1.01.018 Port 24 ifType.1 = ethernetCsmacd ifType.2 = ethernetCsmacd ifType.3 = ethernetCsmacd ifType.4 = ethernetCsmacd ifType.5 = ethernetCsmacd ifType.6 = ethernetCsmacd ifType.7 = ethernetCsmacd ifType.8 = ethernetCsmacd ifType.9 = ethernetCsmacd ifType.10 = ethernetCsmacd ifType.11 = ethernetCsmacd ifType.12 = ethernetCsmacd ifType.13 = ethernetCsmacd ifType.14 = ethernetCsmacd ifType.15 = ethernetCsmacd ifType.16 = ethernetCsmacd ifType.17 = ethernetCsmacd ifType.18 = ethernetCsmacd ifType.19 = ethernetCsmacd ifType.20 = ethernetCsmacd ifType.21 = ethernetCsmacd ifType.22 = ethernetCsmacd ifType.23 = ethernetCsmacd ifType.24 = ethernetCsmacd ifMtu.1 = 1522 ifMtu.2 = 1522 ifMtu.3 = 1522 ifMtu.4 = 1522 ifMtu.5 = 1522 ifMtu.6 = 1522 ifMtu.7 = 1522 ifMtu.8 = 1522 ifMtu.9 = 1522 ifMtu.10 = 1522 ifMtu.11 = 1522 ifMtu.12 = 1522 ifMtu.13 = 1522 ifMtu.14 = 1522 ifMtu.15 = 1522 ifMtu.16 = 1522 ifMtu.17 = 1522 ifMtu.18 = 1522 ifMtu.19 = 1522 ifMtu.20 = 1522 ifMtu.21 = 1522 ifMtu.22 = 1522 ifMtu.23 = 1522 ifMtu.24 = 1522 ifSpeed.1 = 100000000 ifSpeed.2 = 0 ifSpeed.3 = 0 ifSpeed.4 = 0 ifSpeed.5 = 0 ifSpeed.6 = 0 ifSpeed.7 = 0 ifSpeed.8 = 0 ifSpeed.9 = 0 ifSpeed.10 = 0 ifSpeed.11 = 0 ifSpeed.12 = 0 ifSpeed.13 = 0 ifSpeed.14 = 0 ifSpeed.15 = 0 ifSpeed.16 = 0 ifSpeed.17 = 0 ifSpeed.18 = 0 ifSpeed.19 = 0 ifSpeed.20 = 0 ifSpeed.21 = 0 ifSpeed.22 = 0 ifSpeed.23 = 0 ifSpeed.24 = 0 ifPhysAddress.1 = ec:22:80:40:3c:6 ifPhysAddress.2 = ec:22:80:40:3c:6 ifPhysAddress.3 = ec:22:80:40:3c:6 ifPhysAddress.4 = ec:22:80:40:3c:6 ifPhysAddress.5 = ec:22:80:40:3c:6 ifPhysAddress.6 = ec:22:80:40:3c:6 ifPhysAddress.7 = ec:22:80:40:3c:6 ifPhysAddress.8 = ec:22:80:40:3c:6 ifPhysAddress.9 = ec:22:80:40:3c:6 ifPhysAddress.10 = ec:22:80:40:3c:6 ifPhysAddress.11 = ec:22:80:40:3c:6 ifPhysAddress.12 = ec:22:80:40:3c:6 ifPhysAddress.13 = ec:22:80:40:3c:6 ifPhysAddress.14 = ec:22:80:40:3c:6 ifPhysAddress.15 = ec:22:80:40:3c:6 ifPhysAddress.16 = ec:22:80:40:3c:6 ifPhysAddress.17 = ec:22:80:40:3c:6 ifPhysAddress.18 = ec:22:80:40:3c:6 ifPhysAddress.19 = ec:22:80:40:3c:6 ifPhysAddress.20 = ec:22:80:40:3c:6 ifPhysAddress.21 = ec:22:80:40:3c:6 ifPhysAddress.22 = ec:22:80:40:3c:6 ifPhysAddress.23 = ec:22:80:40:3c:6 ifPhysAddress.24 = ec:22:80:40:3c:6 ifAdminStatus.1 = up ifAdminStatus.2 = up ifAdminStatus.3 = up ifAdminStatus.4 = up ifAdminStatus.5 = up ifAdminStatus.6 = up ifAdminStatus.7 = up ifAdminStatus.8 = up ifAdminStatus.9 = up ifAdminStatus.10 = up ifAdminStatus.11 = up ifAdminStatus.12 = up ifAdminStatus.13 = up ifAdminStatus.14 = up ifAdminStatus.15 = up ifAdminStatus.16 = up ifAdminStatus.17 = up ifAdminStatus.18 = up ifAdminStatus.19 = up ifAdminStatus.20 = up ifAdminStatus.21 = up ifAdminStatus.22 = up ifAdminStatus.23 = up ifAdminStatus.24 = up ifOperStatus.1 = up ifOperStatus.2 = down ifOperStatus.3 = down ifOperStatus.4 = down ifOperStatus.5 = down ifOperStatus.6 = down ifOperStatus.7 = down ifOperStatus.8 = down ifOperStatus.9 = down ifOperStatus.10 = down ifOperStatus.11 = down ifOperStatus.12 = down ifOperStatus.13 = down ifOperStatus.14 = down ifOperStatus.15 = down ifOperStatus.16 = down ifOperStatus.17 = down ifOperStatus.18 = down ifOperStatus.19 = down ifOperStatus.20 = down ifOperStatus.21 = down ifOperStatus.22 = down ifOperStatus.23 = down ifOperStatus.24 = down ifLastChange.1 = 0:0:00:00.00 ifLastChange.2 = 0:0:00:00.00 ifLastChange.3 = 0:0:00:00.00 ifLastChange.4 = 0:0:00:00.00 ifLastChange.5 = 0:0:00:00.00 ifLastChange.6 = 0:0:00:00.00 ifLastChange.7 = 0:0:00:00.00 ifLastChange.8 = 0:0:00:00.00 ifLastChange.9 = 0:0:00:00.00 ifLastChange.10 = 0:0:00:00.00 ifLastChange.11 = 0:0:00:00.00 ifLastChange.12 = 0:0:00:00.00 ifLastChange.13 = 0:0:00:00.00 ifLastChange.14 = 0:0:00:00.00 ifLastChange.15 = 0:0:00:00.00 ifLastChange.16 = 0:0:00:00.00 ifLastChange.17 = 0:0:00:00.00 ifLastChange.18 = 0:0:00:00.00 ifLastChange.19 = 0:0:00:00.00 ifLastChange.20 = 0:0:00:00.00 ifLastChange.21 = 0:0:00:00.00 ifLastChange.22 = 0:0:00:00.00 ifLastChange.23 = 0:0:00:00.00 ifLastChange.24 = 0:0:00:00.00 ifInOctets.1 = 2260563 ifInOctets.2 = 0 ifInOctets.3 = 0 ifInOctets.4 = 0 ifInOctets.5 = 0 ifInOctets.6 = 0 ifInOctets.7 = 0 ifInOctets.8 = 75140 ifInOctets.9 = 0 ifInOctets.10 = 0 ifInOctets.11 = 0 ifInOctets.12 = 0 ifInOctets.13 = 0 ifInOctets.14 = 0 ifInOctets.15 = 0 ifInOctets.16 = 0 ifInOctets.17 = 179128 ifInOctets.18 = 0 ifInOctets.19 = 0 ifInOctets.20 = 0 ifInOctets.21 = 0 ifInOctets.22 = 0 ifInOctets.23 = 0 ifInOctets.24 = 0 ifInUcastPkts.1 = 10964 ifInUcastPkts.2 = 0 ifInUcastPkts.3 = 0 ifInUcastPkts.4 = 0 ifInUcastPkts.5 = 0 ifInUcastPkts.6 = 0 ifInUcastPkts.7 = 0 ifInUcastPkts.8 = 167 ifInUcastPkts.9 = 0 ifInUcastPkts.10 = 0 ifInUcastPkts.11 = 0 ifInUcastPkts.12 = 0 ifInUcastPkts.13 = 0 ifInUcastPkts.14 = 0 ifInUcastPkts.15 = 0 ifInUcastPkts.16 = 0 ifInUcastPkts.17 = 353 ifInUcastPkts.18 = 0 ifInUcastPkts.19 = 0 ifInUcastPkts.20 = 0 ifInUcastPkts.21 = 0 ifInUcastPkts.22 = 0 ifInUcastPkts.23 = 0 ifInUcastPkts.24 = 0 ifInNUcastPkts.1 = 9051 ifInNUcastPkts.2 = 0 ifInNUcastPkts.3 = 0 ifInNUcastPkts.4 = 0 ifInNUcastPkts.5 = 0 ifInNUcastPkts.6 = 0 ifInNUcastPkts.7 = 0 ifInNUcastPkts.8 = 587 ifInNUcastPkts.9 = 0 ifInNUcastPkts.10 = 0 ifInNUcastPkts.11 = 0 ifInNUcastPkts.12 = 0 ifInNUcastPkts.13 = 0 ifInNUcastPkts.14 = 0 ifInNUcastPkts.15 = 0 ifInNUcastPkts.16 = 0 ifInNUcastPkts.17 = 182 ifInNUcastPkts.18 = 0 ifInNUcastPkts.19 = 0 ifInNUcastPkts.20 = 0 ifInNUcastPkts.21 = 0 ifInNUcastPkts.22 = 0 ifInNUcastPkts.23 = 0 ifInNUcastPkts.24 = 0 ifInDiscards.1 = 0 ifInDiscards.2 = 0 ifInDiscards.3 = 0 ifInDiscards.4 = 0 ifInDiscards.5 = 0 ifInDiscards.6 = 0 ifInDiscards.7 = 0 ifInDiscards.8 = 0 ifInDiscards.9 = 0 ifInDiscards.10 = 0 ifInDiscards.11 = 0 ifInDiscards.12 = 0 ifInDiscards.13 = 0 ifInDiscards.14 = 0 ifInDiscards.15 = 0 ifInDiscards.16 = 0 ifInDiscards.17 = 0 ifInDiscards.18 = 0 ifInDiscards.19 = 0 ifInDiscards.20 = 0 ifInDiscards.21 = 0 ifInDiscards.22 = 0 ifInDiscards.23 = 0 ifInDiscards.24 = 0 ifInErrors.1 = 0 ifInErrors.2 = 0 ifInErrors.3 = 0 ifInErrors.4 = 0 ifInErrors.5 = 0 ifInErrors.6 = 0 ifInErrors.7 = 0 ifInErrors.8 = 0 ifInErrors.9 = 0 ifInErrors.10 = 0 ifInErrors.11 = 0 ifInErrors.12 = 0 ifInErrors.13 = 0 ifInErrors.14 = 0 ifInErrors.15 = 0 ifInErrors.16 = 0 ifInErrors.17 = 0 ifInErrors.18 = 0 ifInErrors.19 = 0 ifInErrors.20 = 0 ifInErrors.21 = 0 ifInErrors.22 = 0 ifInErrors.23 = 0 ifInErrors.24 = 0 ifInUnknownProtos.1 = 0 ifInUnknownProtos.2 = 0 ifInUnknownProtos.3 = 0 ifInUnknownProtos.4 = 0 ifInUnknownProtos.5 = 0 ifInUnknownProtos.6 = 0 ifInUnknownProtos.7 = 0 ifInUnknownProtos.8 = 0 ifInUnknownProtos.9 = 0 ifInUnknownProtos.10 = 0 ifInUnknownProtos.11 = 0 ifInUnknownProtos.12 = 0 ifInUnknownProtos.13 = 0 ifInUnknownProtos.14 = 0 ifInUnknownProtos.15 = 0 ifInUnknownProtos.16 = 0 ifInUnknownProtos.17 = 0 ifInUnknownProtos.18 = 0 ifInUnknownProtos.19 = 0 ifInUnknownProtos.20 = 0 ifInUnknownProtos.21 = 0 ifInUnknownProtos.22 = 0 ifInUnknownProtos.23 = 0 ifInUnknownProtos.24 = 0 ifOutOctets.1 = 2033497 ifOutOctets.2 = 0 ifOutOctets.3 = 0 ifOutOctets.4 = 0 ifOutOctets.5 = 0 ifOutOctets.6 = 0 ifOutOctets.7 = 0 ifOutOctets.8 = 0 ifOutOctets.9 = 0 ifOutOctets.10 = 0 ifOutOctets.11 = 0 ifOutOctets.12 = 0 ifOutOctets.13 = 0 ifOutOctets.14 = 0 ifOutOctets.15 = 0 ifOutOctets.16 = 0 ifOutOctets.17 = 265264 ifOutOctets.18 = 0 ifOutOctets.19 = 0 ifOutOctets.20 = 0 ifOutOctets.21 = 0 ifOutOctets.22 = 0 ifOutOctets.23 = 0 ifOutOctets.24 = 0 ifOutUcastPkts.1 = 10212 ifOutUcastPkts.2 = 0 ifOutUcastPkts.3 = 0 ifOutUcastPkts.4 = 0 ifOutUcastPkts.5 = 0 ifOutUcastPkts.6 = 0 ifOutUcastPkts.7 = 0 ifOutUcastPkts.8 = 0 ifOutUcastPkts.9 = 0 ifOutUcastPkts.10 = 0 ifOutUcastPkts.11 = 0 ifOutUcastPkts.12 = 0 ifOutUcastPkts.13 = 0 ifOutUcastPkts.14 = 0 ifOutUcastPkts.15 = 0 ifOutUcastPkts.16 = 0 ifOutUcastPkts.17 = 308 ifOutUcastPkts.18 = 0 ifOutUcastPkts.19 = 0 ifOutUcastPkts.20 = 0 ifOutUcastPkts.21 = 0 ifOutUcastPkts.22 = 0 ifOutUcastPkts.23 = 0 ifOutUcastPkts.24 = 0 ifOutNUcastPkts.1 = 8 ifOutNUcastPkts.2 = 0 ifOutNUcastPkts.3 = 0 ifOutNUcastPkts.4 = 0 ifOutNUcastPkts.5 = 0 ifOutNUcastPkts.6 = 0 ifOutNUcastPkts.7 = 0 ifOutNUcastPkts.8 = 0 ifOutNUcastPkts.9 = 0 ifOutNUcastPkts.10 = 0 ifOutNUcastPkts.11 = 0 ifOutNUcastPkts.12 = 0 ifOutNUcastPkts.13 = 0 ifOutNUcastPkts.14 = 0 ifOutNUcastPkts.15 = 0 ifOutNUcastPkts.16 = 0 ifOutNUcastPkts.17 = 5 ifOutNUcastPkts.18 = 0 ifOutNUcastPkts.19 = 0 ifOutNUcastPkts.20 = 0 ifOutNUcastPkts.21 = 0 ifOutNUcastPkts.22 = 0 ifOutNUcastPkts.23 = 0 ifOutNUcastPkts.24 = 0 ifOutDiscards.1 = 0 ifOutDiscards.2 = 0 ifOutDiscards.3 = 0 ifOutDiscards.4 = 0 ifOutDiscards.5 = 0 ifOutDiscards.6 = 0 ifOutDiscards.7 = 0 ifOutDiscards.8 = 0 ifOutDiscards.9 = 0 ifOutDiscards.10 = 0 ifOutDiscards.11 = 0 ifOutDiscards.12 = 0 ifOutDiscards.13 = 0 ifOutDiscards.14 = 0 ifOutDiscards.15 = 0 ifOutDiscards.16 = 0 ifOutDiscards.17 = 0 ifOutDiscards.18 = 0 ifOutDiscards.19 = 0 ifOutDiscards.20 = 0 ifOutDiscards.21 = 0 ifOutDiscards.22 = 0 ifOutDiscards.23 = 0 ifOutDiscards.24 = 0 ifOutErrors.1 = 0 ifOutErrors.2 = 0 ifOutErrors.3 = 0 ifOutErrors.4 = 0 ifOutErrors.5 = 0 ifOutErrors.6 = 0 ifOutErrors.7 = 0 ifOutErrors.8 = 0 ifOutErrors.9 = 0 ifOutErrors.10 = 0 ifOutErrors.11 = 0 ifOutErrors.12 = 0 ifOutErrors.13 = 0 ifOutErrors.14 = 0 ifOutErrors.15 = 0 ifOutErrors.16 = 0 ifOutErrors.17 = 0 ifOutErrors.18 = 0 ifOutErrors.19 = 0 ifOutErrors.20 = 0 ifOutErrors.21 = 0 ifOutErrors.22 = 0 ifOutErrors.23 = 0 ifOutErrors.24 = 0 ifOutQLen.1 = 0 ifOutQLen.2 = 0 ifOutQLen.3 = 0 ifOutQLen.4 = 0 ifOutQLen.5 = 0 ifOutQLen.6 = 0 ifOutQLen.7 = 0 ifOutQLen.8 = 0 ifOutQLen.9 = 0 ifOutQLen.10 = 0 ifOutQLen.11 = 0 ifOutQLen.12 = 0 ifOutQLen.13 = 0 ifOutQLen.14 = 0 ifOutQLen.15 = 0 ifOutQLen.16 = 0 ifOutQLen.17 = 0 ifOutQLen.18 = 0 ifOutQLen.19 = 0 ifOutQLen.20 = 0 ifOutQLen.21 = 0 ifOutQLen.22 = 0 ifOutQLen.23 = 0 ifOutQLen.24 = 0 ifSpecific.1 = zeroDotZero ifSpecific.2 = zeroDotZero ifSpecific.3 = zeroDotZero ifSpecific.4 = zeroDotZero ifSpecific.5 = zeroDotZero ifSpecific.6 = zeroDotZero ifSpecific.7 = zeroDotZero ifSpecific.8 = zeroDotZero ifSpecific.9 = zeroDotZero ifSpecific.10 = zeroDotZero ifSpecific.11 = zeroDotZero ifSpecific.12 = zeroDotZero ifSpecific.13 = zeroDotZero ifSpecific.14 = zeroDotZero ifSpecific.15 = zeroDotZero ifSpecific.16 = zeroDotZero ifSpecific.17 = zeroDotZero ifSpecific.18 = zeroDotZero ifSpecific.19 = zeroDotZero ifSpecific.20 = zeroDotZero ifSpecific.21 = zeroDotZero ifSpecific.22 = zeroDotZero ifSpecific.23 = zeroDotZero ifSpecific.24 = zeroDotZero root@observium:~# Regards Simon

4 6

Observium poller is becoming slow
by Ming Wong, CLSA 18 Sep '18

18 Sep '18

Hi, The polling time for each device is becoming long when more and more devices added to Observium. From the poller debug output most of the time is spent on SQL update. For a network switch, each port will trigger a SQL update. Is it possible for Observium to poll all ports first, and then have a single SQL update statement covering all ports ? Any advice in enhancing the polling speed or database performance ? Thanks and regards, Ming The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

4 5

Cisco 3850 Stack
by Jacek.Dabrowski＠selgros.pl 17 Sep '18

17 Sep '18

Hello, Does anyone know why Observium cannot see stacking information from Cisco Cat 3850? In Catalyst 3750 and 9300 everything is fine. In Device Cisco- 3850 MIBs, CISCO-STACKWISE-MIB not exist !!! OiD showing correct information [cid:image003.png@01D44E66.F0517D10] >From 3850 [cid:image001.png@01D44E66.7CD631F0] >From 9300 [cid:image002.png@01D44E66.7CD631F0] Pozdrawiam Jacek Dąbrowski

2 4

unknown processor type
by Andi Felani 17 Sep '18

17 Sep '18

hi, this is the first time i know about observium last week i already install on debian 9 all device running well like cisco switch, cisco air, printer etc when i try monitoring windows that unknown processor type

5 11

problem in graphics of more than 1000 devices
by Wilbert Martínez López 17 Sep '18

17 Sep '18

hello can you please support me with the following situation I have, I installed Obervium in a virtual machine with 8 Gb of RAM and 8 cores, which have an Intel Xeon processor E5-1620 v3 at 3.50 Ghz, hard drive of 200 GB, has installed a version of Ubuntu 16.04.5 with Observium version CE17.9.0 when it had 30 devices added works well in terms of graphics, but when we added more antennas in total 1085 at the time it has become slow and also the graphics shows incomplete of any element, cpu, memory, ports, etc, the devices aggregates are radios of ubiquiti and mikrotik, I attach the images where it shows the commented of the graphics graph a month from a port graph to 6 hours a port the same situation occurs with the graphics of memory, processor, memory or any ports of all devices Wilbert.

9 20

snmpget on multiple OID fails on Eaton UPS
by Mailing Lists 14 Sep '18

14 Sep '18

We have around 22 Eaton UPS devices currently monitored on Observium and I have been investigating today why about 25% of them refuse to return a syslocation. It seems that the devices just don't reliably return snmpget when multiple OID are queried at once, at least for these objects. Specifically, when taking the following command from the poller debug and running it manually: /usr/bin/snmpget -t '4' -r '2' -v3 -l 'authPriv' -n '' -x 'DES' -X 'removed' -a 'MD5' -A 'removed' -u 'observium' -Pu -OQUs -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'device':'161' sysUpTime.0 sysLocation.0 sysContact.0 sysName.0 The request times out even when increasing the timeout. When reducing the number of OID queried to 3 or less the device seems to respond: /usr/bin/snmpget -t '4' -r '2' -v3 -l 'authPriv' -n '' -x 'DES' -X 'removed' -a 'MD5' -A 'removed' -u 'observium' -Pu -OQUs -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'device':'161' sysUpTime.0 sysLocation.0 sysContact.0 sysUpTime.0 = 0:0:31:01.19 sysLocation.0 = location sysContact.0 = user(a)example.com /usr/bin/snmpget -t '4' -r '2' -v3 -l 'authPriv' -n '' -x 'DES' -X 'removed' -a 'MD5' -A 'removed' -u 'observium' -Pu -OQUs -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'device':'161' sysLocation.0 sysContact.0 sysName.0 sysLocation.0 = location sysContact.0 = user(a)example.com sysName.0 = device Is there a way to configure the behaviour to reduce the number of simultaneous OID requested to make this work reliably? Thanks, Tim C

4 15

Bills API
by MKS 14 Sep '18

14 Sep '18

Hello Has these been any requests of added more functions to the bill API? (create/update, delete, etc) Can I expect that this will be add in a near term future (e.g. this year) or does this have to be a professional services job to get this feature? Regards MKS

1 0

731 Revisions behind
by Thomas Steffensen 11 Sep '18

11 Sep '18

Hi, I am currently running: Version Information Observium CE 0.16.10.8128 (6th October 2016) OS Linux 3.2.0-4-amd64 [amd64] (Debian 7.11) Apache 2.2.22 (Debian) PHP 5.4.45-0+deb7u11 Python 2.7.3 MySQL 5.5.58-0+deb7u1 (extension: mysqli 5.5.58) SNMP NET-SNMP 5.4.3 RRDtool 1.4.7 And I would really like to upgrade to version 17.9.8859 which is 731 revisions ahead. However, being 2 years behind on updates I admit that I am having a little bit of an issue with the consequences of this. Is there any best practices I should follow or are there revisions that I should upgrade to first before going to the latest? Med venligst hilsen, Thomas Steffensen Network Administrator Parknet | Esromgade 15, opgang 1, 5. sal | 2200 København N | Phone +45 3690 6000 Mobil +45 4265 0504 | www.parknet.dk<http://www.parknet.dk/>

2 1

Juniper firewall MIB
by pierremarie.cossey＠orange.com 11 Sep '18

11 Sep '18

Hello Did you plan to implement JUNIPER-FIREWALL-MIB in next versions ? Thx for your answer Regards PM Envoyé de mon Galaxy S8 Orange _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you.

3 3

Re: [Observium] TP-Link switches freeze with new Observium CE
by Mike Stupalov 10 Sep '18

10 Sep '18

Hrm, on all my tested TP-Link switches this feature improved polling speed. That why separate_walk feature for this os enabled. But such problems are certainly unacceptable, I will disable that for os. Anyway, if you have not so many devices, goto device edit page -> Modules -> disable 'separate_walk' option. > Attila Nagy <mailto:tylla_at_memetic.org@tylla.hu> > 7 September 2018 at 19:31 > Hi List! > > Firstly our appreciations go to the team for the new CE version. > Thanks a lot! > > Now the somewhat bitter part: we updated yesterday evening to the > latest CE version and today morning we were confronted with the > problem that a few Tp-Link switches have frozen. To be more precise, > only the management part was frozen, so the switch was degraded to a > dumb non-manageable switch. After reboot the switches return to full > function only to freeze again on next SNMP poll. > > The switches in question are all T1600G-28TS or T1600G-28PS > (poor-man's manageable gigabit switches :-)) > There is no newer firmware update available for them. > They worked perfectly with the previous CE version up until the update. > > We have other Tp-Link switches which are not affected by the same > problem: TL-SG2424, TL-SG2216, TL-SG2008. > > > We tried to narrow down the problem, and it seems that discovery works > as it should, the freeze enacts during the polling, more exactly when > the ports module runs. Looking at the debug log the following command > produces the freeze: > /usr/bin/snmpget -v2c -c 'public' -Pu -OQUs -m IF-MIB -M > /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp > 'udp':'switch-test':'161' ifInMulticastPkts.1 ifOutMulticastPkts.1 > ifInBroadcastPkts.1 ifOutBroadcastPkts.1 ifHCInOctets.1 > ifHCOutOctets.1 ifHCInUcastPkts.1 ifHCOutUcastPkts.1 > ifHCInMulticastPkts.1 ifHCOutMulticastPkts.1 ifHCInBroadcastPkts.1 > ifHCOutBroadcastPkts.1 ifInOctets.1 ifOutOctets.1 ifInUcastPkts.1 > ifOutUcastPkts.1 ifInNUcastPkts.1 ifOutNUcastPkts.1 ifInDiscards.1 > ifOutDiscards.1 ifInErrors.1 ifOutErrors.1 ifInUnknownProtos.1 ifMtu.1 > ifSpeed.1 ifPhysAddress.1 ifAdminStatus.1 ifLastChange.1 > ifPromiscuousMode.1 ifConnectorPresent.1 > > From here onward there is no SNMP response from the switch, the SYS > LED stops blinking and is frozen in whichever state it was, and there > is no network connectivity to the switch (does not respond to ping and > the management interface is inaccessible). The dumb switch hardware > was still working for some time, but this was inconsistent, some > switches have frozen to a complete halt some time after, while others > were still working as dumb switches. As these are under constant load > we didn't had the time to more thoroughly investigate on them, we > restored their functionality and disabled them in Observium. > We have one extra hardware that we can put online for testing if needed. > > > My questions would be: > - Should I include a full debug log or the above info is enough? > - Has anyone met the same problem/has a solution to it? > - Can we know what was changed on the above command line, so maybe as > a workaround we can disable that single feature? > - I suspect this is a firmware issue, but I am not sure (that's why > I'm asking here first, here I have way bigger chances to receive > meaningful answers compared to Tp-Link's support), maybe somebody can > help me narrow down the firmware bug if it is really one. > > Thank you guys in advance. > > Best regards, > Tylla > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov https://stupalov.com -- Mike Stupalov Observium Limited, http://observium.org

4 4

Observium site blank after logging in
by Stallings, Breisch 10 Sep '18

10 Sep '18

I've acquired an Observium implementation, which worked perfectly fine a few months ago. Nothing that I know of has changed over the past few months. Now we can get to the login screen as usual. As soon as you enter your credentials and login, the very next screen is completely blank and nothing appears. We've rebooted the box several times. Today I upgraded to the latest release - 9431. I'm not very proficient working through Linux troubleshooting, which is was the base OS is. Has anyone else seen this issue and possibly how to troubleshoot/resolve it? Thank You. ****************************************************************************************** This message may contain confidential or proprietary information intended only for the use of the addressee(s) named above or may contain information that is legally privileged. If you are not the intended addressee, or the person responsible for delivering it to the intended addressee, you are hereby notified that reading, disseminating, distributing or copying this message is strictly prohibited. If you have received this message by mistake, please immediately notify us by replying to the message and delete the original message and any copies immediately thereafter. Thank you. ****************************************************************************************** CLLD

2 1

bng_active_sessions not graphed anymore
by Klimek, Denis 10 Sep '18

10 Sep '18

Hi, can someone help me to debug the graphing of "bng_active_sessions"? Which module is responsible etc pp? I noticed that Observium stopped graphing it for every Cisco ASR device for already 2 weeks. Based on our logfiles there was no update at that time. Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

2 1

Add UPS-MIB to Mikrotik discovery
by Kaiser, Erich 09 Sep '18

09 Sep '18

Any chance you can add the UPS-MIB to the mikrotik discovery? A lot of guys are using the mikrotik to monitor UPS via USB/serial. Sincerely, Erich Kaiser The Fusion Network erich(a)gotfusion.net Office: 815-570-3101

2 3

Re: [Observium] Devices not being discovered
by Michael 08 Sep '18

08 Sep '18

The answer is in the CLI output when you tried adding the device there. ==== # ./add_device.php jr01 home v2c 161 udp Observium CE 18.9.9420 Add Device(s) Try to add jr01: Trying v2c community *** [0] ... No reply on given community *** using v2c. Could not reach jr01 with given SNMP parameters using v2c. Devices failed: 1. ==== Your device is not answering your SNMP queries. I'd start by checking the following: - wrong community string - wrong dns/hosts entry - snmpd on the target not listening/bound correctly for remote v2c queries - local firewall on target device Cheers, Michael > On 8 Sep 2018, at 1:17 pm, Michael <michael(a)smarsz.com> wrote: > > The answer is in the CLI output when you tried adding the device there. > > > ==== > # ./add_device.php jr01 home v2c 161 udp > Observium CE 18.9.9420 > Add Device(s) > > Try to add jr01: > Trying v2c community *** [0] ... > No reply on given community *** using v2c. > Could not reach jr01 with given SNMP parameters using v2c. > Devices failed: 1. > ==== > > > Your device is not answering your SNMP queries. I'd start by checking the following: > > - wrong community string > - wrong dns/hosts entry > - snmpd on the target not listening/bound correctly for remote v2c queries > - local firewall on target device > > > Cheers, > > Michael > > > > > > > > >> On 8 Sep 2018, at 10:42 am, Adam Armstrong <adama(a)memetic.org> wrote: >> >> No, I mean that poller run was pointless because how are you going to poll something which isn't even in observium? >> >> Adam. >> >> Sent from BlueMail >> On 8 Sep 2018, at 01:01, Roland Hill <roland.lists(a)hillnet.co.nz> wrote: >> On Fri, 07 Sep 2018 or thereabouts, Adam Armstrong came forth with: >> >> You do not have any devices in the database called "jr01". >> >> I deleted jr01 yesterday thinking that re-adding it might magically fix >> whatever the issue is. >> >> jr01 exists, can be founf on the network and has snmp running. >> >> ==== >> # fping jr01 >> jr01 is alive >> >> # systemctl status snmpd >> ● snmpd.service - Simple Network Management Protocol (SNMP) Daemon. >> Loaded: loaded (/lib/systemd/system/snmpd.service; enabled; vendor preset: enabled) >> Active: active (running) since Fri 2018-09-07 17:59:00 NZST; 17h ago >> Process: 1118 ExecStartPre=/bin/mkdir -p /var/run/agentx (code=exited, status=0/SUCCESS) >> Main PID: 1121 (snmpd) >> Tasks: 1 (limit: 4915) >> CGroup: /system.slice/snmpd.service >> └─1121 /usr/sbin/snmpd -Lsd -Lf /dev/null -u Debian-snmp -g Debian-snmp -I -smux mteTrigger mteTriggerConf -f >> >> >> # ps aux | grep snmpd >> Debian-+ 1121 0.0 0.1 65024 11364 ? Ss Sep07 0:44 /usr/sbin/snmpd -Lsd -Lf /dev/null -u Debian-snmp -g Debian-snmp -I -smux mteTrigger mteTriggerConf -f >> >> ==== >> >> Adding the device jr01 from the command line fails: >> >> ==== >> # ./add_device.php jr01 home v2c 161 udp >> Observium CE 18.9.9420 >> Add Device(s) >> >> Try to add jr01: >> Trying v2c community *** [0] ... >> No reply on given community *** using v2c. >> Could not reach jr01 with given SNMP parameters using v2c. >> Devices failed: 1. >> ==== >> >> I'm out of idea's but will go back to first principles and walk the >> install guide again just in case I have overlooked anything. jr01 has >> previously been discovered okay, but maybe I changed something and don't >> remember. >> >> I appreciate your help Adam. >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

3 3

Devices not being discovered
by Roland Hill 08 Sep '18

08 Sep '18

Hi all, I've been running the CE version of Observium for a few years now, always upgrading as the new releases come out. Earlier this year my server hosting Observium updated to Ubuntu 18.04 and php7x. As previously raised on list, this was incompatible with the previous CE version. No problem, I waited it out. Now my issue. Since upgrading to the latest CE version, 5 out of my 7 devices (home network) are no longer being discovered. I can confirm DNS is working. I've debugged as much as I can, including reinstalling snmpd on the Ubuntu boxes. The devices which are staying down are my Ubuntu boxes and Unifi AP and Secure gateway. Any direction on debugging would be greatly appreciated. -- Regards, Roland

2 11

TP-Link switches freeze with new Observium CE
by Attila Nagy 07 Sep '18

07 Sep '18

Hi List! Firstly our appreciations go to the team for the new CE version. Thanks a lot! Now the somewhat bitter part: we updated yesterday evening to the latest CE version and today morning we were confronted with the problem that a few Tp-Link switches have frozen. To be more precise, only the management part was frozen, so the switch was degraded to a dumb non-manageable switch. After reboot the switches return to full function only to freeze again on next SNMP poll. The switches in question are all T1600G-28TS or T1600G-28PS (poor-man's manageable gigabit switches :-)) There is no newer firmware update available for them. They worked perfectly with the previous CE version up until the update. We have other Tp-Link switches which are not affected by the same problem: TL-SG2424, TL-SG2216, TL-SG2008. We tried to narrow down the problem, and it seems that discovery works as it should, the freeze enacts during the polling, more exactly when the ports module runs. Looking at the debug log the following command produces the freeze: /usr/bin/snmpget -v2c -c 'public' -Pu -OQUs -m IF-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'switch-test':'161' ifInMulticastPkts.1 ifOutMulticastPkts.1 ifInBroadcastPkts.1 ifOutBroadcastPkts.1 ifHCInOctets.1 ifHCOutOctets.1 ifHCInUcastPkts.1 ifHCOutUcastPkts.1 ifHCInMulticastPkts.1 ifHCOutMulticastPkts.1 ifHCInBroadcastPkts.1 ifHCOutBroadcastPkts.1 ifInOctets.1 ifOutOctets.1 ifInUcastPkts.1 ifOutUcastPkts.1 ifInNUcastPkts.1 ifOutNUcastPkts.1 ifInDiscards.1 ifOutDiscards.1 ifInErrors.1 ifOutErrors.1 ifInUnknownProtos.1 ifMtu.1 ifSpeed.1 ifPhysAddress.1 ifAdminStatus.1 ifLastChange.1 ifPromiscuousMode.1 ifConnectorPresent.1 From here onward there is no SNMP response from the switch, the SYS LED stops blinking and is frozen in whichever state it was, and there is no network connectivity to the switch (does not respond to ping and the management interface is inaccessible). The dumb switch hardware was still working for some time, but this was inconsistent, some switches have frozen to a complete halt some time after, while others were still working as dumb switches. As these are under constant load we didn't had the time to more thoroughly investigate on them, we restored their functionality and disabled them in Observium. We have one extra hardware that we can put online for testing if needed. My questions would be: - Should I include a full debug log or the above info is enough? - Has anyone met the same problem/has a solution to it? - Can we know what was changed on the above command line, so maybe as a workaround we can disable that single feature? - I suspect this is a firmware issue, but I am not sure (that's why I'm asking here first, here I have way bigger chances to receive meaningful answers compared to Tp-Link's support), maybe somebody can help me narrow down the firmware bug if it is really one. Thank you guys in advance. Best regards, Tylla

2 1

Power Outage
by Ricardo Franco Cantero 06 Sep '18

06 Sep '18

Hi, What would be the best way to measure for a power outage? I see that there is a sensor for voltage. Would a Min Warn value trigger it on time to send a alert? Met vriendelijke groet, Ricardo Franco Cantero

3 2

Alert my customers
by Ricardo Franco Cantero 05 Sep '18

05 Sep '18

Hi, We monitor our clients through Observium. I wanted to know how I can add individual alert contacts so when a connection of a customer goes down, it sends an alert to us but also directly to the client who's affected. Met vriendelijke groet, Ricardo Franco Cantero

2 1

Association Ruleset
by Ricardo Franco Cantero 05 Sep '18

05 Sep '18

Hi, When I add an alert checker, now I need to add an Association Ruleset. It didn't used to ask for one and I can't seem to find the option to select all, like with the * How do I achieve this? Met vriendelijke groet, Ricardo Franco Cantero

2 1

BGP prefixes graphs not in menus anymore.
by Erwin Botas 05 Sep '18

05 Sep '18

Hi, I’m using professional version and in the latest version, I lost the option to visualize the BGP prefixes, anybody has the same issue? On the poller logs the information is still there. Regards, Erwin Erwin Botas Gerente infraestructura [http://www.criticalcolocation.com/firma/logo.jpg] Tel.: +506 2010-5050 • Cel.: +506 8982-4885 • Fax.: +506 2223-7055 San José, CR • www.criticalcolocation.com [http://www.criticalcolocation.com/firma/line.jpg] NOTA DE CONFIDENCIALIDAD: "La información contenida en este mensaje y sus adjuntos es estrictamente confidencial y se dirige exclusivamente a su destinatario. Si usted no es el destinatario indicado, cualquier divulgación, copia, distribución o uso del contenido de este documento es prohibido y será sancionado de acuerdo con la ley. Si recibió este mensaje por error, debe notificarlo de inmediato al remitente y destruirlo".

3 4

New Observium CE 18.9
by Adam Armstrong 05 Sep '18

05 Sep '18

We've just released the new version of Observium CE, 18.9. This release is based on SVN revision 9411 and includes 552 separate commits covering ~50k changed lines of code since the previous release. The new release can be downloaded from http://www.observium.org and upgrade instructions are at http://www.observium.org/docs/updating/#upgrade-to-latest-major-release Changelogs are : https://docs.observium.org/changelog/ http://www.observium.org/svn.log Thanks, adam.

7 15

How do you configure Internet traffic Today
by Thomas Steffensen 04 Sep '18

04 Sep '18

Hi, I am not sure if this is the right forum but I need some help with basic settings in Observium. I admit I have very little experience with Observium but a great deal with Solarwinds and The Dude (Mikrotik). On my main dashboard window I have a tab saying Internet Traffic Today. This monitors ports to the internet. However, we have replaced some border router and therefor I need to change which ports are being monitored and I can't seem to figure out where I change this? Can I do this in GUI? [cid:image001.png@01D43E26.016A2580] Med venligst hilsen, Thomas Steffensen Network Administrator Parknet | Esromgade 15, opgang 1, 5. sal | 2200 København N | Phone +45 3690 6000 Mobil +45 4265 0504 | www.parknet.dk<http://www.parknet.dk/>

4 19

Application Alert Checker
by Samuel Werneck 04 Sep '18

04 Sep '18

Hi, I have a server running the unix agent and the postgresql module. Is it possible to create an alert checker based on the postgresql app data? Something like... if the "connection count" is below X, than generate an alert Thanks, -- Samuel Werneck

1 0

status_type
by Jacek.Dabrowski＠selgros.pl 01 Sep '18

01 Sep '18

Hello, I trying to create a list of recent battery replacements based on poller module status [cid:image002.jpg@01D4422F.F8DAC510] I create alert check: [cid:image007.jpg@01D4422F.F8DAC510] But checker catches all Status Indicators, what am I doing wrong ? [cid:image008.jpg@01D4422F.F8DAC510] Pozdrawiam Jacek Dąbrowski

2 3

Custom ODI's
by Pieter De Wit 31 Aug '18

31 Aug '18

Hey Guys, 3 quick questions re Custom ODI’s * Can they be bulk imported ? If not, can this be a feature ? Snmpwalk from “here” down and ask for all the details :) * Can I devide the value by 10 and display that ? * Can I monitor text outputs ? - Just display the value, no graphing ? Thanks, Pieter

1 0

APC ATS - continued
by Jacek.Dabrowski＠selgros.pl 31 Aug '18

31 Aug '18

Hello, I am coming back with the topic of APC ATS, maybe someone will help. The subject of the correct voltage after the discovery, the value is correct, when pooler finish working the value disappears. As I noticed during the discovery, is viewed source in PowerNet-MIB in debug mode , the pooler process in debug is searched in SNMPv2-MIB !!! Is it some bug ? Details in the attachments. Regards Jacek Dąbrowski

3 10

sorting columns in group view?
by Steve Costaras 31 Aug '18

31 Aug '18

Hello- We are running on the stable release chain of observium 18.8.9403 and use groups a lot. I am trying to find out how, or if it's not possible to request the ability to sort via the columns when viewing the group(s). For example in the attached to be able to sort alphanumerically the hostname column; device; or OS; etc. And to set a default 'sort' (say via hostname)? Is this possible? Thanks, Steve

1 0

Subgroups under Custom OIDs just like Devices -> Locations
by Silvio del Val Hinojal 31 Aug '18

31 Aug '18

Hello, Would it be very difficult to have subgroups under "Custom OIDs" menu so that I would navigate in web to Home -> Custom OIDs -> <Group of Custom OIDs> -> Custom OIDs ? I don't know if have explained correctly. I only would like to organize my Custom OIDs in groups in menu bar in the web, just like "Devices -> Locations" do, that there are one subgroup for each location. If it's a lot of work for an small improvement, forget about it. I currently group my Custom OIDs by name. Regards, Silvio [cid:image001.png@01D03B1C.E8E96F80]<http://www.pandasecurity.com/spain/> Silvio del Val Systems Engineer - Panda Security +34 944 343 728 silvio.delval(a)pandasecurity.com<mailto:silvio.delval@pandasecurity.com> pandasecurity.com<http://www.pandasecurity.com/> This e-mail contains confidential information owned by Panda Security. Any such copy, or use, or distribution or disclosure of its contents is strictly forbidden. Please notify us immediately at our phone number (+34 94 425 11 00) if you receive this e-mail and are not its consignee, and then delete this message from your system without copying it, distributing it, or disclosing its contents P Before printing this message, please make sure it is really necessary

1 0

Localization
by Luca Sasdelli 30 Aug '18

30 Aug '18

Hi, our customers are almost all non-english speaking, therefore I'd like to offer them a localized interface. is it planned some localization for Observium? Could we contribute in some way to italian translation? Best Luca

4 4

HP Procurve - dot1q and OSFP
by Christian Eriksson 29 Aug '18

29 Aug '18

Hi, 1. dot1Q All interfaces whether they be untagged or tagged, are marked as dot1q in the UI I have attached a debug of a device from the modules "ports" and "vlan"(debug.txt). Also a show vlan <id>(showvlan.txt) to prove that they really are untagged ;) 1. OSPF A lot of devices with no OSPF configuration have a routing button with OSPF in the UI(see attached file OSPF.png). Debug file is also attached(ospf_debug.txt) Output from show command [cid:image001.png@01D43FC7.747651A0] If you think I should open a JIRA case instead, i'll do it Running 18.8.9405 Regards Christian

1 0

Location mass edit
by Luca Sasdelli 29 Aug '18

29 Aug '18

Hi all, should I change the location of a whole 42U-rack equipments to a new one, does it exist any tool to do it in a single-shot? Or should I operate on the db? (or to uniquely name the racks, but this is another affair) Thanks Luca

3 4

ifIndex IPv4 addresses
by Christian Eriksson 29 Aug '18

29 Aug '18

Hi, I think this used to work before? IPv4 address tab doesn't show the interface name anymore, but instead ifIndex value. Under details I can see the ifName and IPv4 address correlation Running 18.8.9403 Vänliga hälsningar / Best regards, [Advania_Trappa_CMYK] Christian Eriksson System Consultant [cid:image003.png@01D43F94.18030DB0]<mailto:christian.eriksson@advania.se>[Advania-Bikupa Facebook]<https://www.facebook.com/advania.se/>[Advania-Bikupa LinkedIn]<https://www.linkedin.com/company/advania-ab/>[Advania-Bikupa Twitter]<https://twitter.com/advania_se> +4641090488<tel:+4641090488> | +46761400400<tel:+46761400400> www.advania.se<http://www.advania.se/> | Stockholm<https://www.google.se/maps/place/Advania+Sverige+AB/@59.3062176,18.0278762,…>

3 5

ifindex instead of ports
by Tomasz Karczewski 29 Aug '18

29 Aug '18

I noticed that i see ifindex instead of ports in ip address search page. When i manually discovered devices i see logs: Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. So i'm reporting. Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

2 1

Polling times grew a lot upgrading to 18.8.9403 from 18.7.9337
by Silvio del Val Hinojal 29 Aug '18

29 Aug '18

Hello, This morning I upgraded our Observium Pro machines from prior version 18.7.9337 to last 18.8.9403 and, since then, polling times growed by almost 3 or 4 times: [cid:image003.jpg@01D43ED6.AFE37570] I upgraded using "svn update" in our polling machines and "discovery.php -u" to upgrade DB schema. I even tried to activate "$config['snmp']['max-rep'] = TRUE;" with no luck. What should I change to fix this times? Regards, Silvio [cid:image001.png@01D03B1C.E8E96F80]<http://www.pandasecurity.com/spain/> Silvio del Val Systems Engineer - Panda Security +34 944 343 728 silvio.delval(a)pandasecurity.com<mailto:silvio.delval@pandasecurity.com> pandasecurity.com<http://www.pandasecurity.com/> This e-mail contains confidential information owned by Panda Security. Any such copy, or use, or distribution or disclosure of its contents is strictly forbidden. Please notify us immediately at our phone number (+34 94 425 11 00) if you receive this e-mail and are not its consignee, and then delete this message from your system without copying it, distributing it, or disclosing its contents P Before printing this message, please make sure it is really necessary

5 7

Get more information on Dashboard for Process consumption
by Kaustubh Parthasarthy, CLSA 29 Aug '18

29 Aug '18

I have been using observium for few months now. I wanted some info from the graphs that observium spins off. Following is the graphs for running process consumption: [cid:image001.png@01D43EAC.03C3D610] Can I get something like top 10 process graphs? Let me give you an example, I sometimes get requests from folks asking, "Ok my memory utilization on a server ABC was 90% on this particular day. Can we get list of processes consuming high memory on that particular day ? " So as per this, can I customize the graph to get process level info ? Kaustubh Parthasarthy Analyst, Production Management Group D +91 20 6646 8625 | M +91 989 284 4625 | T +91 20 6646 8888 4/F, C-Wing, Panchshil Tech Park-1, Yerawada, Pune 411006, India [:1. Social Media Icons:CLSA_Social Media Icons_linkedin.png]<https://hk.linkedin.com/company/clsa>[:1. Social Media Icons:CLSA_Social Media Icons_twitter.png]<https://twitter.com/clsainsights?lang=en>[:1. Social Media Icons:CLSA_Social Media Icons_youtube.png]<https://www.youtube.com/channel/UC0qWp_lLnOcRYmBlCNQgZKA>[:1. Social Media Icons:CLSA_Social Media Icons_facebook.png]<https://www.facebook.com/clsacommunity/> clsa.com<https://www.clsa.com/> Insights. Liquidity. Capital. [CLSA_RGB]<https://www.clsa.com/member> A CITIC Securities Company The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

6 17

Observium Database
by Kaustubh Parthasarthy, CLSA 29 Aug '18

29 Aug '18

Hi Team, I have implemented observium in my environment. I wanted to look at some background scripts etc which gets the performance data like CPU, memory etc. For that I like to check the MYSQL database. Can someone please guide me if there is a way I can get access to the DB and have a look and also where the scripts are stored ? Regards Kaustubh Kaustubh Parthasarthy Analyst, Production Management Group D +91 20 6646 8625 | M +91 989 284 4625 | T +91 20 6646 8888 4/F, C-Wing, Panchshil Tech Park-1, Yerawada, Pune 411006, India [:1. Social Media Icons:CLSA_Social Media Icons_linkedin.png]<https://hk.linkedin.com/company/clsa>[:1. Social Media Icons:CLSA_Social Media Icons_twitter.png]<https://twitter.com/clsainsights?lang=en>[:1. Social Media Icons:CLSA_Social Media Icons_youtube.png]<https://www.youtube.com/channel/UC0qWp_lLnOcRYmBlCNQgZKA>[:1. Social Media Icons:CLSA_Social Media Icons_facebook.png]<https://www.facebook.com/clsacommunity/> clsa.com<https://www.clsa.com/> Insights. Liquidity. Capital. [CLSA_RGB]<https://www.clsa.com/member> A CITIC Securities Company The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

3 3

Dashboards
by Cederlund Tobias 27 Aug '18

27 Aug '18

Hi (...threw the to the list yesterday, but it didn't came through...) A few months ago I noticed the appearance of a "Default Dashboard" under Overview in the menu. There's also a nice "Add to Dashboard" button on graph-pages to add the graph to a dashboard. This seems like a fantastic feature but right now there only the "Default Dashboard". Is it possible add more dashboards? ...and if so, how? I also haven't seen any documentation of this very nice feature. Is there any? We're on 18.8.9355 Best regards, Tobias

4 4

UPS autodiscovery
by Eric W. Bates 24 Aug '18

24 Aug '18

What flavor UPS'en do folks find work best with Observium? The brand I'm using now doesn't support lldp or cdp and I haven't been able to collect anything. -- Clark 159a, MS 46 508/289-3112

3 4

Re: [Observium] Static routes
by Mike Stupalov 23 Aug '18

23 Aug '18

This is huge.. NO, really very huge tables. Discovery can fetch this table more than 10-20-30 mins. I already was test with such ability, many devices just did stop respond after try to fetch this table. > Klimek, Denis <mailto:DKlimek@Stadtwerke-Norderstedt.de> > 23 August 2018 at 13:55 > > Hi, > > what is your opinion about extracting also the static configured > routes from the device? > > Possible SNMP OID would be .1.3.6.1.2.1.4.24.7 > > We have the case that multiple prefixes are staticly configured and > that we are able to fetch them in the Observium database for 3^rd > party purposes that we built around. > > I know that pulling the routes from a device with a BGP full route > takes a lot of time, but maybe it can be implemented into the > discovery module instead of the poller. > > A way to ignore BGP or to exclude everything except static is not > known so far…. From my side. > > Mit freundlichem Gruß > > Stadtwerke Norderstedt > > *Denis Klimek* > > Professional Network Engineer > > IP-Systemtechnik > > Tel: 040 / 521 04 – 1049 > > Mobil: 0151 / 652 219 06 > > dklimek(a)stadtwerke-norderstedt.de > <mailto:dklimek@stadtwerke-norderstedt.de> > > www.stadtwerke-norderstedt.de <http://www.stadtwerke-norderstedt.de/> > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

2 1

Dashboards
by Cederlund Tobias 23 Aug '18

23 Aug '18

Hi A few months ago I noticed the appearance of a "Default Dashboard" under Overview in the menu. There's also a nice "Add to Dashboard" button on graph-pages to add the graph to a dashboard. This seems like a fantastic feature but right now there only the "Default Dashboard". Is it possible add more dashboards? ...and if so, how? I also haven't seen any documentation of this very nice feature. Are there any? Med vänlig hälsning Tobias Cederlund Systemspecialist Driftstöd Länsstyrelsernas IT-avdelning 351 86 VÄXJÖ Besök: Kungsgatan 8, Växjö 010 - 224 44 61 (+46 10 - 224 44 61) 070 - 524 85 57 (+46 70 - 524 85 57) tobias.cederlund(a)lansstyrelsen.se<mailto:tobias.cederlund@lansstyrelsen.se> www.lansstyrelsen.se/vastragotaland<http://www.lansstyrelsen.se/vastragotaland>

1 0

Hardware showing as generic not openvz
by Simon Mousey Smith 23 Aug '18

23 Aug '18

Hi All Im trying to work out if im being stupid or something isnt right? Some machines we monitor are showing the hardware as 'OpenVZ Containers' but others are being found as 'Generic x86' I have installed the distro script on all the machines and im using the latest version 2.0 script Output from one of the machines which is an openvz container - Linux|4.4.0|amd64|Ubuntu|16.04||openvz Am I missing something? Regards Simon

2 2

Static routes
by Klimek, Denis 23 Aug '18

23 Aug '18

Hi, what is your opinion about extracting also the static configured routes from the device? Possible SNMP OID would be .1.3.6.1.2.1.4.24.7 We have the case that multiple prefixes are staticly configured and that we are able to fetch them in the Observium database for 3rd party purposes that we built around. I know that pulling the routes from a device with a BGP full route takes a lot of time, but maybe it can be implemented into the discovery module instead of the poller. A way to ignore BGP or to exclude everything except static is not known so far.... From my side. Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

1 0

Ricoh private MIB
by Mike Stupalov 22 Aug '18

22 Aug '18

Someone can get RicohPrivateMIB from an restricted vendor area? RICOH places in open access only PDF file with mib description. > Mike Stupalov <mailto:mike@observium.org> > 22 August 2018 at 09:39 > Haha, new words for learn: zaebis', pizdetc > > I did not plan on writing it.. but a small insomnia :D > Mike Stupalov <mailto:mike@observium.org> > 22 August 2018 at 03:01 > Hi, > > do not post here links to an *nms urls/issues ;) > > Ricoh is very hidden vendor.. No ways for fetch latest private MIB. > > But I was added toner/ink discovery for Ricoh in r9379 :P > -- Mike Stupalov Observium Limited, http://observium.org

2 1

Custom OID Metric Conditions (now with 100% more attachment)
by Brandwatch NOC 22 Aug '18

22 Aug '18

Hi, The attached image shows some custom OIDs I have set up to monitor Juniper QFX VCP link status. These work fine and I see the custom graphs (gauges where state 1 = link up, state 0 = link down). The last bit I need to figure out is how to alert on them. I think I'm 90% of the way there. You can see the custom OIDs in the top browser window. In the bottom browser window, I'm unsure how to refer to the custom OIDs in the "conditions" bit. Any help gratefully accepted - I've got this far without bothering anyone but I've fallen at the last hurdle. Thanks! Chris -- Chris Tomkins Brandwatch | Senior Network Engineer (Linux/Network) christ(a)brandwatch.com | (+44) 01273 448 949 @Brandwatch New York | San Francisco | Brighton | Singapore | Berlin | Stuttgart Discover how organizations are using Brandwatch to create their own success <https://www.brandwatch.com/customer-success/> Email disclaimer <http://www.brandwatch.com/email-disclaimer/> [image: bw-signature logo.png]

1 0