- observium - lists.observium.org

NetFlow Recommendation
by Oludayo Oyediran 20 Dec '17

20 Dec '17

Afternoon All, We recently purchased Observium after a recommendation from our Network Engineer, what Netflow software would you recommend to use alongside Observium? If you know any Open Source ones, that'd be awesome. I came across Nfsen but it's a tad too old. Also I have Observium talking to 6 out of 8 of my routers and SNMP is turned on on all of them. If you require any info please let me know. There are 7 Cisco x 1 Juniper routers and the affected routers are Cisco. Regards, Oludayo Oyediran I IT Operations Officer e ooyediran(a)jjoconnor.com.au<mailto:ooyediran@jjoconnor.com.au> t 03 5382 1727 423 Western Highway | Horsham Victoria 3402 www.oconnorscaseih.com.au<http://www.oconnorscaseih.com.au/> This communication may contain confidential or copyright information of JJ O'Connor & Sons Pty Ltd (ABN 33 005 242 142). If you are not an intended recipient, you must not keep, forward, copy, use, save or rely on this communication, and any such action is unauthorised and prohibited. If you have received this communication in error, please reply to this email to notify the sender of its incorrect delivery, and then delete both it and your reply. -- Message protected by MailGuard: e-mail anti-virus, anti-spam and content filtering. http://www.mailguard.com.au

5 4

Syslog Alerts
by Peter Derissen 20 Dec '17

20 Dec '17

Hello, Im trying to set up some syslog alerts in observium. 1 want to have 3 up and 3 down alerts. Any Idea? /ifOperStatus down/ works just fine. /ifOperStatus down(2), ifName ae/ Not working /ifOperStatus down(2), ifName xe/ Not working /ifOperStatus down(2), ifName ge/ Not working Gr Peter ******** IMPORTANT NOTICE ******** This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system. Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof. Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01.

2 3

Multi year history
by Attila Nagy 19 Dec '17

19 Dec '17

Hi everyone! I was wondering about whether there is a recommended/approved/tested/tolerated way or plan of creating multi-year history (RRD data)? To reformulate it, changing the day/week/month/year history into something like day/week/month/year/10years... It's not a show-stopper, but sometimes there is demand to show or analyze historical data for more than 1 year in the past. Regards, Tylla

3 7

Re: [Observium] Aggregate graphs are limited to 349 ports
by Markus Klock 18 Dec '17

18 Dec '17

Hi, this is possible by making a port group. There is No limit there I Think /Markus Den 18 dec. 2017 20:31 skrev "Richard Wigzell" <richard.wigzell(a)it.ox.ac.uk >: Hello, is this configurable? We would like to be able to see aggragte throughput for a number of our networks but the port count for the selection is more than 349. [image: cid:image001.jpg@01CE9215.D39244B0] <https://www.it.ox.ac.uk/> *Richard Wigzell* Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN *T:* 01865 616282 www.it.ox.ac.uk _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Aggregate graphs are limited to 349 ports
by Richard Wigzell 18 Dec '17

18 Dec '17

Hello, is this configurable? We would like to be able to see aggragte throughput for a number of our networks but the port count for the selection is more than 349. [cid:image001.png@01D37836.9C729B40] [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

"Access to outside localnet is blocked "
by Edvinas K 18 Dec '17

18 Dec '17

Hello, >From 11/30 in observium.log i started to see these messages: "[2017/12/13 10:14:05 +0000] alerter.php(9571): get_http_request() exit with timeout. Access to outside localnet is blocked by firewall or network problems. Check proxy settings. [2017/12/13 11:33:16 +0000] discovery.php(24209): get_http_request() exit with timeout. Access to outside localnet is blocked by firewall or network problems. Check proxy settings." what could cause that ? Thanks

2 1

[QUESTION] Alerting Different Group and Devices
by San Rollheiser 16 Dec '17

16 Dec '17

Hi, i have a problem with the Alerts, in the first case i dont recieve the emails alerts, after the update my alerts never send to my email. But before the update the emails alerting work fine... But my principal problem is the alerting notifications via email or slack or sms to differents groups and devices... Ex: I have 3 clients this clients have 50 devices each one... I need send only the alerts related for each clients devices not for all devices. This is possible? Thx. BR Santiago

4 5

Multiple AD authentication
by Richard Wigzell 15 Dec '17

15 Dec '17

Hi, is it possible to configure Observium to authenticate against multiple Active Directorys? We have Pro and would like users from two ADs to be able to use it. Regards Rw

3 2

UNIX Agent graph history
by Attila Nagy 14 Dec '17

14 Dec '17

Hi everyone! We are using the CE version (17.9.0) so ignore my e-mail if this is already solved in the Pro edition. We started to configure the UNIX agent on a few of our machines and we saw that all the pop-up graphs in the Apps overviews are only showing the last 24 hours. Is this on purpose? Isn't there some possibility to make these graphs show the usual way (day, week, month, year)? Regards, Tylla

2 2

Netonix MIB
by Travis Garrison 14 Dec '17

14 Dec '17

We noticed in the changelog that Netonix MIB was added. We have a Netonix switch but it was discovered as a generic device. We looked at the MIB list but we do not see the Netonix MIB in the list. Do we need to do anything special? Netonix WS-8-150-AC Observium 17.11.8942 (rolling) Thank you Travis

5 9