- observium - lists.observium.org

Subdirectory
by churnd dnruhc 30 Apr '12

30 Apr '12

Is it possible to use observium on a webserver as a subdirectory, i.e. https://server/observium? I'm a small shop that's part of a bigger organization & I don't have access to DNS to create a subdomain. Apologies if this has been answered already. I did a quick search & saw a similar question asked, but the thread didn't seem to contain an answer I could see. TIA

7 8

Re: [Observium] Ironware CPU Patch
by Adam Armstrong 30 Apr '12

30 Apr '12

The old one is also hundredths. The only kid which gives while units is one of the new ones. Adam. -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. Matthias Cramer <matthias.cramer(a)iway.ch> wrote: Hi Adam On 30/04/12 15:29, Adam Armstrong wrote: > The newer OIDs come from a newer version of the MIB. > > Incidentally, 1300 / 100 is 13. If it was displaying 0.13, then there is some maths failure within the polling code (or discovery is storing the wrong settings in the database). True, I noticed that. Observium seams to do everything right for this OID, but it is not getting this oid, it is getting the "old" one. And there I get real percents back. Attached is a Screenshot of that MIB part. The real question is in my opinion, how to get the new OID to work. The Processor discovery as it is now can in my opinion only detect the old one. Regards Matthias -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zürich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250 _____________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

Ironware CPU Patch
by Matthias Cramer 30 Apr '12

30 Apr '12

Hi The scale of the discovered CPU's on Ironware based geer is off by factor 100. This patch will fix that. Tested on Brocade XMR4000 Regards Matthias Index: includes/discovery/processors/ironware.inc.php =================================================================== --- includes/discovery/processors/ironware.inc.php (revision 3098) +++ includes/discovery/processors/ironware.inc.php (working copy) @@ -15,11 +15,11 @@ { $usage_oid = ".1.3.6.1.4.1.1991.1.1.2.11.1.1.6." . $index; $usage = $entry['snAgentCpuUtil100thPercent']; - $precision = 100; + $precision = 1; } elseif ($entry['snAgentCpuUtilValue']) { $usage_oid = ".1.3.6.1.4.1.1991.1.1.2.11.1.1.4." . $index; $usage = $entry['snAgentCpuUtilValue']; - $precision = 100; + $precision = 1; } list($slot, $instance, $interval) = explode(".", $index); -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zürich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250

3 5

Web links
by Mark Murphy 28 Apr '12

28 Apr '12

I have installed the software and I get the login page bur every link I click on after that gives a 404 error. This is a Ubuntu server and the default web is only the monitoring software. I made the updates according to the install instructions.

2 1

No VLANs tab / Cisco 2960S / 0.12.4.3087
by Adam Armstrong 27 Apr '12

27 Apr '12

Aha. This is because we check for 1,2 and two, three for vtp version. This will be fixed later today, i'm just rewriting the discovery module to be more sane. adam. On 2012-04-27 07:15, Damien BASTIE wrote: > One result : > > SNMPv2-SMI::enterprises.9.9.46.1.1.1.0 = INTEGER: 3 > > ________________________________________ > De : Adam Armstrong [adama(a)memetic.org] > Date d'envoi : vendredi 27 avril 2012 00:25 > À : Damien BASTIE > Objet : Re: RE : [Observium] No VLANs tab / Cisco 2960S / 0.12.4.3087 > > and : > > > > .1.3.6.1.4.1.9.9.46.1.1.1.0 > > > > adam. >

1 0

No VLANs tab / Cisco 2960S / 0.12.4.3087
by Damien BASTIE 26 Apr '12

26 Apr '12

Hi, I am testing Observium for the first time I have no VLANs tab for a stack Cisco 2960S, it is normal ? Cisco 2960 S / cat29xxStack / C2960S-UNIVERSALK9-M / Cisco IOS 12.2(55)SE2 (UNIVERSALK9) If i can send any debug no problem ! Regards, Damien

5 10

data missing on BGP IPv4 prefixes graphs
by Dario Calamai 23 Apr '12

23 Apr '12

Hello! there are an "Error Drawing Graph" on BGP IPv4 Prefixes page graphs. (/routing/protocol=bgp/type=all/graph=prefixes_ipv4unicast/view=graphs/) I don't know if this error appears in last update... little question about mail notification: do you have disabled the notification of DOWN of a BGP Peer? it works when peering is going UP or FLAP only! many thanks! dario -- http://www.playnet.it phone +39 055 3226622 - fax +39 055 3226444 Brain Technology s.p.a. - AS 13284 http://www.linkedin.com/in/dariocalamai

2 2

problem with Sentry3-MIB, 3 phase CDU's
by Darrell Budic 21 Apr '12

21 Apr '12

Hi, Running Observium 0.11.12.2749 on SL5 for this issue. Updated to 3069 and still has the same issues. But anyway: Noticed my Sentry CDU's were not picking up current or voltage information, tracked it down to a issue with the MIB. Not sure if it's the MIB in general or my version of the snmp utilities, but the discovery module complains it can't find the MIB when run in debug mode. Turns out my snmpget doesn't like the whitespace before the "Sentry3-MIB DEFINITIONS ::= BEGIN" line. I removed the whitespace and discovered the sensors. Then I noticed I had 3 phase CDU's, and the discovery code for the Sentrys only deals with 1 phase units. Here's the diffs of my hack to enable detection of all 3 phases. I think this will work on single phase units as well, although it will probably take a little longer as it scans for the nonexistent phases. I have no single phase units to test it on, however, so YMMV. 16c16,20 < $infeed_oids = snmp_walk($device, "infeedID.$towers.1", "-Osqn", "Sentry3-MIB"); --- > # These PDUs may have > 1 infeed for 3 phase systems > $phase=1; > while ($phase <= 3) { > > $infeed_oids = snmp_walk($device, "infeedID.$towers.$phase", "-Osqn", "Sentry3-MIB"); 31c35 < $infeed_oid = "1.3.6.1.4.1.1718.3.2.2.1.7." . $towers . ".1"; --- > $infeed_oid = "1.3.6.1.4.1.1718.3.2.2.1.7." . $towers . "." . $phase; 33c37 < $descr_string = snmp_get($device,"infeedID.$towers.$infeed_index", "-Ovq", "Sentry3-MIB"); --- > $descr_string = snmp_get($device,"infeedID.$towers.$phase", "-Ovq", "Sentry3-MIB"); 37,38c41,42 < $high_warn_limit = snmp_get($device,"infeedLoadHighThresh.$towers.$infeed_index", "-Ovq", "Sentry3-MIB"); < $high_limit = snmp_get($device,"infeedCapacity.$towers.$infeed_index", "-Ovq", "Sentry3-MIB"); --- > $high_warn_limit = snmp_get($device,"infeedLoadHighThresh.$towers.$phase", "-Ovq", "Sentry3-MIB"); > $high_limit = snmp_get($device,"infeedCapacity.$towers.$phase", "-Ovq", "Sentry3-MIB"); 42c46 < discover_sensor($valid['sensor'], 'current', $device, $infeed_oid, $towers, 'sentry3', $descr, $divisor, $multiplier, $low_limit, $low_warn_limit, $high_warn_limit, $high_limit, $current); --- > discover_sensor($valid['sensor'], 'current', $device, $infeed_oid, "$towers.$phase" , 'sentry3', $descr, $divisor, $multiplier, $low_limit, $low_warn_limit, $high_warn_limit, $high_limit, $current); 48c52 < $outlet_oids = snmp_walk($device, "outletLoadValue.$towers.1", "-Osqn", "Sentry3-MIB"); --- > $outlet_oids = snmp_walk($device, "outletLoadValue.$towers.$phase", "-Osqn", "Sentry3-MIB"); 61c65 < $outletsuffix = "$towers.$infeed_index.$outlet_index"; --- > $outletsuffix = "$towers.$phase.$outlet_index"; 103a108,109 > $phase++; > } //if($phase) Hope it helps someone :) Thanks for the nice work! -Darrell

1 0

Data collection stopped
by Chris Stone 19 Apr '12

19 Apr '12

Data collection stopped today - running build 3060 - was working fine with that for awhile, so not sure what happened. Running poller manually I get the error: dot3StatsDuplexStatus/usr/bin/snmpbulkwalk -v2c -c public -OQUs -m EtherLike-MIB -M /opt/observium/mibs udp:axis-core-01.axint.net:161 dot3StatsDuplexStatus dot3StatsDuplexStatus = No Such Object available on this agent at this OID SQL[SELECT COUNT(*) FROM `ports` WHERE `device_id` = '1' AND `ifType` = 'adsl'] /usr/bin/snmpbulkwalk -v2c -c public -OQUs -m Q-BRIDGE-MIB -M /opt/observium/mibs udp:axis-core-01.axint.net:161 dot1qPortVlanTable dot1qPortVlanTable = No Such Object available on this agent at this OID /usr/bin/snmpbulkwalk -O QUs -v2c -c public -M /opt/observium/mibs -m Q-BRIDGE-MIB udp:axis-core-01.axint.net:161 dot1qVlanCurrentEgressPorts 2>/dev/null dot1qVlanCurrentEgressPorts = No Such Object available on this agent at this OID /usr/bin/snmpbulkwalk -v2c -c public -OQUs -m Q-BRIDGE-MIB -M /opt/observium/mibs udp:axis-core-01.axint.net:161 dot1dBasePortIfIndex dot1dBasePortIfIndex = No Such Object available on this agent at this OID SQL[SELECT * FROM `ports` WHERE `device_id` = '1'] Port lo(1) PHP Fatal error: Call to a member function get() on a non-object in /opt/observium/includes/polling/ports.inc.php on line 168 Fatal error: Call to a member function get() on a non-object in /opt/observium/includes/polling/ports.inc.php on line 168 Suggestions? Anyone else seeing this? Oh, this is PHP 5.3.10 and Observium build 3060. -- Chris Stone AxisInternet, Inc. www.axint.net

2 5

I/O wait
by Ciro Iriarte 19 Apr '12

19 Apr '12

Hi!, I noticed just today that observium doesn't graph i/o wait time from CPU usage. Only user/nice/system/idle, i/o wait is not provided by SNMP or it's just missing in Observium? Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

6 17