- observium - lists.observium.org

Observium compatibility as mobile apps
by Idzma Zakaria 16 Mar '17

16 Mar '17

Hi, I just create a mobile apps for observium but the page webview seem not capable for mobile viewing.It just a normal webview ( as seen on normal monitor). Is it can be done as for adaptive web design to suit mobile viewing?Any adjustments to the page itself? An advice really appreciated. Thank you. -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

2 2

alert checkers excluding device types
by Tomasz Karczewski 15 Mar '17

15 Mar '17

Hi, Simple question how to exclude for ex ample device types like servers from alert checkers? J Tomasz Karczewski Administrator Sieci olman tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

2 2

Cisco ASA 9.4(3)6 Remote Access Sessions
by Richard Reitenauer 14 Mar '17

14 Mar '17

I am currently using the latest community edition and looking to go to the professional subscription. With a Cisco ASA 9.4(3)6 and graphing the Remote Access Sessions, I am seeing odd data and it looks like others have had the same issue for a couple years now. I attached a screenshot of what I am seeing. >From Cisco CLI - show vpn-sessiondb anyconnect summary: VPN Session Summary --------------------------------------------------------------------------- Active : Cumulative : Peak Concur : Inactive ---------------------------------------------- AnyConnect Client : 96 : 8582 : 101 : 3 SSL/TLS/DTLS : 96 : 8582 : 101 : 3 >From Observium interface snapshot is attached. Is there any fix for this? Also, can we graph per anyconnect group? Thanks, Rich Reitenauer Sr. Infrastructure Analyst 1 Meridian Blvd, Suite 2C01 Wyomissing, PA 19610 O: 610-373-7999 x1255 rreitenauer(a)ugies.com<mailto:rreitenauer@ugies.com>

1 0

Custom OID
by Canto José 14 Mar '17

14 Mar '17

Hello, I implemented some custom OID (gauge), is it possible to define also Alertchecks on this custom OID? Thanks in advanced Best regards José

1 0

Minor graph problems
by William Bauer 14 Mar '17

14 Mar '17

Ever since I moved our installation from CentOS6 with PHP 5.6 to CentOS7 (7.3) with PHP 7.0, I've noticed that the MRTG, "Graph Maximum" and "Graph Trend" menu items don't do anything. All of them used to work great. Is this enough information to signal to anyone what particular PHP package or PHP configuration entry might have been missed? I'm hoping the combination of these three is a smoking gun that signals "X is missing". Thanks.

2 4

Simple service checks?
by Mark Boyce 13 Mar '17

13 Mar '17

Hi All Very new to observium, so please forgive me if this is a silly question :-) In order to migrate away from nagios we also want to be able to track non-snmp values. For example; - Response time of web sites (is response correct, if so report response time) - SSL Certificate (is cert ok, if so report number of days left) … and similar Very easily scriptable checks, I just can’t work out what to do with them. Ideally I’d like to create a device that doesn’t respond to SNMP checks but gets data from a local script. Is this achievable or am I completely misusing Observium? Simply trying to get everything monitoring from one place :-) Mark

3 5

Export Graph as CSV or Excel file
by Sophanith Chhom 11 Mar '17

11 Mar '17

Dear All, May I know if Observium already had a feature to export as CSV/Excel file from the graph? Thanks,

1 0

Re: [Observium] observium Digest, Vol 80, Issue 9
by Don Maker 10 Mar '17

10 Mar '17

"643m means 0.643 Adam." Thank you for the response, Adam. That makes sense, but numbers like 291.59m do not. Should I just assume that anything with an m is less than zero? On Thu, Mar 9, 2017 at 7:00 AM, <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: question regarding traffic accounting (Adam Armstrong) > 2. Re: question regarding traffic accounting (Michael) > 3. Re: question regarding traffic accounting (Adam Armstrong) > 4. Re: question regarding traffic accounting (Ross [Eve IT]) > 5. Re: question regarding traffic accounting (Adam Armstrong) > 6. Re: question regarding traffic accounting (Adam Armstrong) > 7. Re: Windows Processor Numbers are Odd (Max Krabbenhöft) > 8. SVN Update doesn't seem to update observium (Lorenzo Zafra) > 9. Re: Windows Processor Numbers are Odd (Adam Armstrong) > 10. Re: SVN Update doesn't seem to update observium (Adam Armstrong) > 11. Re: question regarding traffic accounting (Ross [Eve IT]) > 12. Re: question regarding traffic accounting (Ross [Eve IT]) > 13. Help with monitor Tomcat Traffic without Apache (Michael) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 08 Mar 2017 12:06:39 +0000 > From: Adam Armstrong <adama(a)memetic.org> > To: Observium Public Support <observium(a)observium.org> > Subject: Re: [Observium] question regarding traffic accounting > Message-ID: <9574d4e3-a350-4a31-9469-9d255671a64e(a)typeapp.com> > Content-Type: text/plain; charset="utf-8" > > It has to be large to keep the c*nt per square mile density the same as in > normal countries... > > ... > > :D > > ⁣Sent from BlueMail > > On 8 Mar 2017, 10:36, at 10:36, "Ross [Eve IT]" <ross(a)eve-it.net> wrote: > >Thanks for the response, > >It is virtual, we did actually vmotion a few hosts to this server > >including > >the Observium machine. > > > >But I've checked the hypervisor, and its clock is good. > >Also uses NTP, same as the other Hypervisors. > > > >Although good point, I've actually been thinking about that exact same > >thing for logging purposes. UTC across the board as we also span a few > >timezones, Australia is large! > > > > > >On Wed, Mar 8, 2017 at 9:29 PM, Michael <obslist(a)smarsz.com> wrote: > > > >> It's very odd as there's no timezone of UTC+21. > >> > >> Your Observium instance isn't virtual is it? We've encountered > >problems > >> with guests set to obtain their time from the local clock and (on > >ESXi > >> hypervisors) have a massive time jump when vmotioned to a new host as > >they > >> grab their time from that clock. Any inconsistencies between the > >> hypervisors will throw your guests clock big time. All of a sudden, > >your > >> guest has jumped +10 hours (and ntpd will often wet its pants and > >refuse to > >> correct such a huge offset)... > >> > >> We had a similar problem to above when one hypervisor was set to our > >local > >> time (+10/11, same as you) when it was supposed to be set to UTC. In > >our > >> case, we run all of our clocks deliberately in UTC to preserve > >logging > >> integrity etc (you never get duplicated log times during the daylight > >> savings shift). > >> > >> Might not be your issue, but it may help somebody else (and worth > >keeping > >> in mind)! > >> > >> Michael > >> > >> > >> > >> > On 8 Mar 2017, at 8:55 pm, Ross [Eve IT] <ross(a)eve-it.net> wrote: > >> > > >> > Looks correct > >> > > >> > mysql> SELECT TIMEDIFF(NOW(), UTC_TIMESTAMP); > >> > +--------------------------------+ > >> > | TIMEDIFF(NOW(), UTC_TIMESTAMP) | > >> > +--------------------------------+ > >> > | 11:00:00 | > >> > +--------------------------------+ > >> > 1 row in set (0.00 sec) > >> > > >> > mysql> > >> > > >> > mysql> SELECT @@global.time_zone, @@session.time_zone; > >> > +--------------------+---------------------+ > >> > | @@global.time_zone | @@session.time_zone | > >> > +--------------------+---------------------+ > >> > | SYSTEM | SYSTEM | > >> > +--------------------+---------------------+ > >> > 1 row in set (0.00 sec) > >> > > >> > mysql> > >> > > >> > # date > >> > Wednesday 8 March 20:55:17 AEDT 2017 > >> > > >> > > >> > > >> > > >> > On Wed, Mar 8, 2017 at 8:32 PM, Simon Schmitz <schmitz(a)eseven.de> > >wrote: > >> > MySQL Time ? > >> > > >> > Am 08.03.2017 um 15:31 schrieb Ross [Eve IT] <ross(a)eve-it.net>: > >> > > >> >> Tried all that, still no go. > >> >> > >> >> I've set PHP to the right timezone. > >> >> NTP is set and running on all our servers. > >> >> > >> >> Any other ideas ? > >> >> > >> >> > >> >> On Tue, Mar 7, 2017 at 7:45 PM, Sophanith Chhom < > >> sophanith.chhom(a)gmail.com> wrote: > >> >> Try to use single quote? eg: > >> >> > >> >> date.timezone = 'Australia/Melbourne' > >> >> > >> >> Then restart httpd service > >> >> > >> >> On Tue, Mar 7, 2017 at 3:28 PM, Ross [Eve IT] <ross(a)eve-it.net> > >wrote: > >> >> Hi Sam, > >> >> thanks for responding. > >> >> however I already have that set correctly. > >> >> > >> >> [Date] > >> >> ; Defines the default timezone used by the date functions > >> >> ; http://php.net/date.timezone > >> >> date.timezone = Australia/Melbourne > >> >> > >> >> any other ideas ? > >> >> > >> >> > >> >> On Tue, Mar 7, 2017 at 5:40 PM, Sam Hernandez-gill < > >> Sam.Hernandez-gill(a)qvc.com> wrote: > >> >> > >> >> I think that’s usually the php.ini timezone setting when the > >filtered > >> time doesn’t match, check out what you have set there, and match your > >> system’s timezone and restart apache > >> >> > >> >> > >> >> > >> >> From: observium [mailto:observium-bounces@observium.org] On Behalf > >Of > >> Ross [Eve IT] > >> >> Sent: Tuesday, March 07, 2017 1:19 AM > >> >> To: observium(a)observium.org > >> >> Subject: [Observium] question regarding traffic accounting > >> >> > >> >> > >> >> > >> >> Hello all, > >> >> > >> >> > >> >> > >> >> I'm using traffic accounting for multiple interfaces and have > >noticed a > >> strange occurrence. > >> >> > >> >> The graphs seem to be be producing the wrong time in the graphs. > >> >> > >> >> > >> >> > >> >> See attached; > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> If you notice the top right corner, 2017/03/08 03:15:04 > >> >> > >> >> It's Tues 7th here 5:15pm. > >> >> > >> >> > >> >> > >> >> The server clock is synced NTP. > >> >> > >> >> > >> >> > >> >> Is there something I've missed here ? > >> >> > >> >> > >> >> > >> >> Observium 17.3.8420 (rolling) > >> >> > >> >> Debian Wheezy. > >> >> > >> >> > >> >> > >> >> Ross. > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> ---------------------------- > >> >> This message (including any attachments) contains confidential > >> information intended for a specific individual and purpose, and is > >> protected by law. If you are not the intended recipient of this > >e-mail > >> (even if the e-mail address above is yours), (i) you may not use, > >copy or > >> retransmit it, (ii) please delete this message and (iii) please > >notify the > >> sender immediately. Any disclosure, copying, or distribution of this > >> message or the taking of any action based on it, is strictly > >prohibited. > >> >> ---------------------------- > >> >> > >> >> > >> >> > >> >> > >> >> _______________________________________________ > >> >> observium mailing list > >> >> observium(a)observium.org > >> >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >> >> > >> >> > >> >> > >> >> _______________________________________________ > >> >> observium mailing list > >> >> observium(a)observium.org > >> >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >> >> > >> >> > >> >> > >> >> _______________________________________________ > >> >> observium mailing list > >> >> observium(a)observium.org > >> >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >> >> > >> >> > >> >> _______________________________________________ > >> >> observium mailing list > >> >> observium(a)observium.org > >> >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >> > > >> > _______________________________________________ > >> > observium mailing list > >> > observium(a)observium.org > >> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >> > > >> > > >> > _______________________________________________ > >> > observium mailing list > >> > observium(a)observium.org > >> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >> > >> _______________________________________________ > >> observium mailing list > >> observium(a)observium.org > >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >> > > > > > >------------------------------------------------------------------------ > > > >_______________________________________________ > >observium mailing list > >observium(a)observium.org > >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

3 3

SVN Update doesn't seem to update observium
by Lorenzo Zafra 10 Mar '17

10 Mar '17

Hello All, I submitted a patch and it was commited in r8368, but when I run svn update to r8428 I dont get any of the changes. Anyone know whats wrong? We are running the subscription edition, if that matters. I checked to see if I would get the patch when creating a new copy of observium through [svn co ... ] and yes it worked fine. -- [image: Edmonton_sig_RGB_S.jpg] Lorenzo Zafra COMMUNICATIONS ENGINEERING STUDENT ENGINEERING & MAINTENANCE CITY OPERATIONS | EDMONTON TRANSIT 7 <(780)%20442-5021>80-944-0419 OFFICE 7 <(780)%20668-1302>80-885-3696 MOBILE l <matthew.dyck(a)edmonton.ca>orenzo.zafra(a)edmonton.ca City of Edmonton D.L. MacDonald Transit Yards ROW Building 13304 - 50A Street Edmonton AB T5A 4P6 All information contained in this email post is proprietary to the City of Edmonton, confidential and intended only for the addressed recipient. If you have received this post in error, please disregard the contents, inform the sender of the misdirection, and remove it from your system. The copying, dissemination or distribution of this email, if misdirected, is strictly prohibited.

2 4

question regarding traffic accounting
by Ross [Eve IT] 09 Mar '17

09 Mar '17

Hello all, I'm using traffic accounting for multiple interfaces and have noticed a strange occurrence. The graphs seem to be be producing the wrong time in the graphs. See attached; [image: Inline image 1] If you notice the top right corner, 2017/03/08 03:15:04 It's Tues 7th here 5:15pm. The server clock is synced NTP. Is there something I've missed here ? Observium 17.3.8420 (rolling) Debian Wheezy. Ross.

7 25