- observium - lists.observium.org

[observium] facing problem in email alerting.
by Santanu Mandal 03 Mar '17

03 Mar '17

Hello Guys, I am facing a problem regarding Observium Alerting. Few days ego I have enabled alerts and configured to send to couple of specific email ids. Configured those email Ids in .php file as well as in GUI. Due to some reason I have removed those email Ids to stop sending alerts. Now Observium starts collecting email ids from 'snmp contact' configuration of device and sending alerts to this email id. Please let me know what to configure so that Observium would not be able to send emails to the email id which is configured in snmp contact of network device ? Thanks,

2 1

Traffic Accounting
by Fred Pedrisa 03 Mar '17

03 Mar '17

Hi, guys. I plan to renew my subscription with you, but before doing it, I wanted to make sure, if now we can select "which stream" can be accounted, being : rx, tx or rx+tx, I'm asking this, because we have different ways of billing customer ports and this is a must for us. If this is not present, any chance you could add a switch for this ? It would be great if so. Sincerely, Fred

2 7

Re: [Observium] observium Digest, Vol 80, Issue 3
by Don Maker 03 Mar '17

03 Mar '17

Sorry, but I don't see any attached graphs. I do believe that Cisco memory graphs are working for other people, just not for me. When I go to graphs, system, all I see is processors and device uptime. Not sure where to start troubleshooting and/or correcting this. I should also note that I am using the Turnkey Linux appliance. On Fri, Mar 3, 2017 at 7:00 AM, <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Syslog parsing for NXOS (Markus Bornhauser) > 2. Should I be seeing memory usage graphs on Cisco devices? > (Don Maker) > 3. Re: Should I be seeing memory usage graphs on Cisco devices? > (Lyndon Labuschagne) > 4. Re: Should I be seeing memory usage graphs on Cisco devices? > (Storer, Darren) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 2 Mar 2017 14:20:14 +0100 > From: Markus Bornhauser <kusi.bornhauser(a)gmail.com> > To: observium(a)observium.org > Subject: [Observium] Syslog parsing for NXOS > Message-ID: > <CADRv88-VsDrnd+8XJKWBxGSctpbV_g3Nz1Tf04M+ > kAAgFX3pNw(a)mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > Hi list, > > Sorry if this had been asked before, but I'm unable to browse the > mailing list archives. > > I have set up syslog parsing with Rsyslogd, like documented [1]. The > syslog.php script does receive the logs and saves them in the > database. Parsing logs from both Cisco Catalyst (IOS) and Cisco Nexus > switches, I discovered that the NXOS logs are parsed incorrectly (see > screenshot [2]). > > Does Observium support NXOS logs, or do I have to change something to > make it as perfect as with IOS logs? > > [1] https://observium.org/docs/syslog/#rsyslogd > [2] https://snag.gy/2eDsgH.jpg > > > ------------------------------ > > Message: 2 > Date: Thu, 2 Mar 2017 13:14:17 -0500 > From: Don Maker <don.p.maker(a)gmail.com> > To: observium(a)observium.org > Subject: [Observium] Should I be seeing memory usage graphs on Cisco > devices? > Message-ID: > <CACF+TreB1n9aB8KC5noXBakgWB_qWMGEjGtAL73mXiwHE08guA@mail. > gmail.com> > Content-Type: text/plain; charset="utf-8" > > I have various Cisco devices ( catalyst switches, ios routers, ios-xe, > etc), but none of them are showing any memory usage details in observium. I > was surprised by this as observium did a remarkable job of recognizing and > displaying information for things that most snmp tools do not, Qnap for > example. It does recognize my Cisco devices and reports back on just about > everything, but memory. Other tools I tried, such as Manageengine, PRTG, > etc reported the memory with no issue. So, I'm skeptical that there is > anything wrong with my snmp setup. > > > > I would really love to get memory usage for my Cisco devices. If anyone has > any suggestions, I'm all ears. > > > > Thanks >

2 1

Should I be seeing memory usage graphs on Cisco devices?
by Don Maker 03 Mar '17

03 Mar '17

I have various Cisco devices ( catalyst switches, ios routers, ios-xe, etc), but none of them are showing any memory usage details in observium. I was surprised by this as observium did a remarkable job of recognizing and displaying information for things that most snmp tools do not, Qnap for example. It does recognize my Cisco devices and reports back on just about everything, but memory. Other tools I tried, such as Manageengine, PRTG, etc reported the memory with no issue. So, I'm skeptical that there is anything wrong with my snmp setup. I would really love to get memory usage for my Cisco devices. If anyone has any suggestions, I'm all ears. Thanks

3 2

Syslog parsing for NXOS
by Markus Bornhauser 02 Mar '17

02 Mar '17

Hi list, Sorry if this had been asked before, but I'm unable to browse the mailing list archives. I have set up syslog parsing with Rsyslogd, like documented [1]. The syslog.php script does receive the logs and saves them in the database. Parsing logs from both Cisco Catalyst (IOS) and Cisco Nexus switches, I discovered that the NXOS logs are parsed incorrectly (see screenshot [2]). Does Observium support NXOS logs, or do I have to change something to make it as perfect as with IOS logs? [1] https://observium.org/docs/syslog/#rsyslogd [2] https://snag.gy/2eDsgH.jpg

1 0

Help.
by Raimundas Šlepikas 02 Mar '17

02 Mar '17

helo, after update in some devices, we`a mising some Hardware info, in that case, it`s hart to find groupe devives by hw, there some samples before, and after. can u help me in this case Please ;) old fw dedlink sw :) sysObjectID => .1.3.6.1.4.1.171.10.75.15.2 sysDescr => DES-1210-28/ME 6.07.B042 sysContact => version => 6.07.B042 hardware => DES-1210-28/ME features => null location => Kovo-11osios-g-36-Kaunas os => dlink status => 1 with new fw, after update sysObjectID => .1.3.6.1.4.1.171.10.75.15.2 sysDescr => DES-1210-28/ME/B2 sysContact => version => 6.10.B017 hardware => features => null R. -- Best regards, Raimundas mailto:raimis@kis.lt

2 5

Search in device Description feature request
by Richard Wigzell 01 Mar '17

01 Mar '17

Hello, we have a small feature request; would it be possible to search for values in the device Description? ('purpose' column in device table). Preferably from the live search box thing in the top right of the UI? This would be a most useful feature for us. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

SNMP support for blades' internal components (CPU, memory DIMMs, etc.)
by Youssef BENGELLOUN - ZAHR 01 Mar '17

01 Mar '17

3 9

Observium weathermap issue
by Sophanith Chhom 01 Mar '17

01 Mar '17

Hi All, I think weathermap is not part of Observium, but if anyone has the same issue with me please share Since I tried to created a few maps via web using weathermap editor like example1.conf, example2.conf, example3.conf and point it to like /maps/example1.html, /maps/example2.html, /maps/example3.html Then I tried to open each map, but all maps will link to the same content instead (like in the same example3). This is so strange if anyone used to have this issue like me, please share how you can fix it Thanks a lot

1 0

Observium API / CE 0.16.1.7533
by Uwe Freier 28 Feb '17

28 Feb '17

Hello, sorry for a maybe stupid question but I searched the Observium docs and FAQs and tried to search the mailing lists archive but latest was not available because the link to 'observium Archivs' on mailman's web interface leads to a 404. Is there an API to Observium and if is there a doc anywhere? Maybe I'm blind but I cannot find any related information if I inserted 'API' in the search field of the Obeservium docs. Google finds some pages that talk of " $config['api']['enabled'] = 1;" and/or query strings for an api.php - I do not even have an api.php in my observium installation. Some Observium values should be made available through a CRM and an API might be a smooth solution. Any tipps appreciated! Thanks, Uwe

1 0