- observium - lists.observium.org

Error
by Jason Vanlandingham 27 Dec '16

27 Dec '16

First time I've seen this. It showed up once today, and once on 24 Nov. I would expect an error like this to happen every time this ran or not at all. What is this? Executable '/opt/observium/poller-wrapper.py' doesn't belong to any package and ProcessUnpackaged is set to 'no'

3 4

Observium: sensor class question
by David Schrok 27 Dec '16

27 Dec '16

Hi all, Question: Is there a way to map a sensor to another sensor class? Currently I have a sensor that shows up as a temperature sensor which in fact is a humidity sensor. Would be great if I can map the sensor or OID value as humidity. With kind regards, David Disclaimer ( http://www.avans.nl/over-avans/e-mail-disclaimer )

4 5

Re: [Observium] Updates to CentOS7 instructions?
by Max Krabbenhöft 26 Dec '16

26 Dec '16

Had problems with this a few months back too. Used this thread to get rpms working again. https://github.com/repoforge/rpms/issues/375 /Max On Dec 22, 2016 07:47, William Bauer <bbauer(a)scripps.edu> wrote: I'm replacing a poorly performing VM running CentOS6 with a real computer running CentOS7. The two commands (listed below) early on in the CentOS7 instructions appear to be invalid. I'm not super Linux literate as I know more of the BSD and Solaris worlds. Are there replacement sources for these? Here are the ones currently failing (I've tried no more of the instructions). I suppose these could be only temporary failures: rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt rpm -Uvh http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el7.rf.… Any help is appreciated. Bill _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 3

atime necessary?
by William Bauer 24 Dec '16

24 Dec '16

Being a BSD and Solaris guy (ZFS for years!), I brought up my new Observium installation putting mariadb on one ZFS mirror, and Observium on another. One thing that can improve performance is by disabling the atime attribute on a filesystem. Does Observium or mysql/mariadb care about this, or can I safely disable it on either or both filesystems? It won't impact the normal timestamps, just the tracking of the last access time of individual files. Thanks again.

2 1

Re: [Observium] Moving Observium
by Cody Cook 22 Dec '16

22 Dec '16

https://www.digitalocean.com/community/tutorials/how-to- migrate-a-mysql-database-between-two-servers That creates and migrates a database. You will also need to add and give permissions for a user on your new MySQL server. The installation instructions should explain how that's done since it is the same commands. Then update the config file for Observium to match your new setup. This is probably a basic skill you should know outside of using Observium. On Dec 22, 2016 1:15 PM, "William Bauer" <bbauer(a)scripps.edu> wrote: > Are there instructions somewhere for moving Observium? I don't know how > to migrate mysql. I was hoping there are concise Observium instructions, > much like the excellent install page. > ------------------------------ > *From:* Cody Cook > *Sent:* Thu Dec 22 13:07:30 PST 2016 > *To:* Observium Network Observation System > *Subject:* Re: [Observium] Moving Observium > > You'll need to also migrate and redirect your MySQL database too. > > On Dec 22, 2016 12:45 PM, "William Bauer" <bbauer(a)scripps.edu> wrote: > >> So I have my new CentOS7 system ready to go, moving from a CentOS6 VM. I >> thought I'd found it before, but I can't find instructions for moving >> observium to a different system (same x86_64 architecture). I can move the >> RRDs, but isn't there more to it, like migrating mysql data? >> >> I've looked through the documentation. Perhaps I'm just looking for the >> wrong text. Any links someone can point to, or instructions for moving >> from one host to another? >> >> Thanks. >> >> Bill >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > ------------------------------ > NOTE: This message was trained as non-spam. If this is wrong, please > correct the training as soon as possible. > > > > ------------------------------ > > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >

1 0

Updates to CentOS7 instructions?
by William Bauer 22 Dec '16

22 Dec '16

I'm replacing a poorly performing VM running CentOS6 with a real computer running CentOS7. The two commands (listed below) early on in the CentOS7 instructions appear to be invalid. I'm not super Linux literate as I know more of the BSD and Solaris worlds. Are there replacement sources for these? Here are the ones currently failing (I've tried no more of the instructions). I suppose these could be only temporary failures: rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt rpm -Uvh http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el7.rf.… Any help is appreciated. Bill

1 0

Wireless Networks
by Stef Renders 20 Dec '16

20 Dec '16

Hi All, We recently started adding customer's wireless environments in our Observium installation. I'm not sure whether this was ever available, but I can tell that observium is discovering my SSID's since I can see them in the database, however, I don't seem to find any reference to them in the interface. Anyone has an idea how far this was ever implemented ? Our customer is using Ruckus. And it seems only the wifi_wlans table is being populated: Kind regards

2 1

suppress tiles on front page
by Vater, Wolfgang 20 Dec '16

20 Dec '16

Hi there, I created alerts for port errors and discards to be notified if there are more than 25. But on my front page I get a tile for each port with port errors, even if it is only 1 error. Is this customizable? I would like to be able to suppress this for ports where I know this happens but can't do anything about it (because someone else doesn't want to fix their device), or raise the threshold so something higher than 1? Wolfgang Wolfgang Vater | Lead Client Architect | Enterprise Services Unisys Deutschland GmbH | +49 162 255 9338 | wolfgang.vater(a)unisys.com | Philipp-Reis-Str. 2 | 65795 Hattersheim [unisys_logo]<http://www.unisys.com/> Unisys Deutschland GmbH | Geschäftsführer: Sandro Lindner & Dr. Uwe Heckert | Sitz der Gesellschaft: Hattersheim | Amtsgericht: Frankfurt/Main HRB 7929 THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE PROPRIETARY MATERIAL and is thus for use only by the intended recipient. If you received this in error, please contact the sender and delete the e-mail and its attachments from all computers. DIESE E-MAIL IST AUSSCHLIESSLICH FÜR DEN ADRESSATEN BESTIMMT UND KANN VERTRAULICHE INFORMATIONEN ENTHALTEN. Sollten Sie nicht der Adressat dieser Informationen sein, bitten wir Sie, sich mit dem Absender in Verbindung zu setzen und die Informationen von Ihren Endgeräten zu entfernen. [Grey_LI]<http://www.linkedin.com/company/unisys> [Grey_TW] <http://twitter.com/unisyscorp> [Grey_GP] <https://plus.google.com/+UnisysCorp/posts> [Grey_YT] <http://www.youtube.com/theunisyschannel> [Grey_FB] <http://www.facebook.com/unisyscorp> [Grey_Vimeo] <https://vimeo.com/unisys> [Grey_UB] <http://blogs.unisys.com/>

3 4

2 x feature request : Avoiding multiple entries for same devices & subgroups
by Jesper Frank Nemholt 20 Dec '16

20 Dec '16

Hi! 1. Especially with autodiscovery I get the same devices created multiple times as the hostname differ and Observium don't seem to always properly identify that the sysName and SNMP ID is the same. What I end up with is either the same device being in there twice. I also have this issue on some solutions using clustering and internal DNS & DHCP so nodes can have multiple IPs and DNS names and change these over time so the only constant is SNMP sysName and SNMP ID. What I am doing now as a workaround is to disable all but one entry per device when I see these duplicates, but it would be great to either have a better check to avoid this from the very beginning, or potentially to have something like what is present for syslog host mapping to allow a N to 1 mapping of devices like : $config['device']['host_map']['foo.bar'] = 'bar.foo'; // device hostname/sysname $config['device']['host_map']['foo.bar'] = 'foo.foo'; // device hostname/sysname With something like this in config.php I could then delete the duplicate entries and they would not be auto discovered again, and I'd avoid having to disable them. 2. The other thing is that it would be great if it was possible to create subgroups for devices, ports and custom OIDs. When having lots of groups for different areas or lots of custom OIDs it quickly gets crowded and having the ability to organize these in a group hierachy would be great, similar to how locations are grouped by country when using geo-coding. /Jesper

2 2

Software raid
by Simon Mousey Smith 20 Dec '16

20 Dec '16

Hi All, Daft question, we have a voip server with software raid in (FreePBX) Does Observium monitor the software raid? I see in the Observium_agent script it does ‘cat /proc/mdstat’ But what does it do? I can’t see any graphs or sensors for the raid? Only the md IO graphs? Regards Simon

3 2

trial observium
by ridwanfi 20 Dec '16

20 Dec '16

hi all, has been using observium for few days and we need to test the trial alert or notification, i know you guys don't provide trial license http://observium.observium.narkive.com/Ra0jsd8Z/professional-version-on-tri… hence if i need to buy subscription or contact sales team whom should I wrote to rgds Ridwan

2 1

NET ISO Routing support
by ecmp 20 Dec '16

20 Dec '16

NET ISO Routing support, debain 8 install, Observium CE 0.16.10.8128 Hi, I'm having trouble getting ISIS to work in observium. I apoligize if this has already been a topic in the email archive, but I was unable to view the archive and I couldn't find anything online relating to this. bgp, ospf, eigrp are all show in the edit-->routing section of the webui. Not ISIS. I know under poller discover modules these exist // Poller/Discovery Modules $config['enable_bgp'] = 1; // Enable BGP session collection and display $config['enable_rip'] = 1; // Enable RIP session collection and display $config['enable_ospf'] = 1; // Enable OSPF session collection and display $config['enable_isis'] = 1; // Enable ISIS session collection and display $config['enable_eigrp'] = 1; // Enable EIGRP session collection and display $config['enable_syslog'] = 0; // Enable Syslog $config['enable_vrfs'] = 1; // Enable VRFs $config['enable_sla'] = 1; // Enable SLA/RPM collection and display $config['enable_pseudowires'] = 1; // Enable Pseudowires digging a bit further, I found that uncommenting this section of the file ./includes/config-variables.inc.php would enable this setting on the webui. However isis data is still not collected and does not show up under device>routing. /// ROUTING ////////////////////////////////////////////////////////// $config_sections['routing']['text'] = "Routing"; $setting = 'enable_isis'; $config_variable[$setting]['section'] = "routing"; $config_variable[$setting]['subsection'] = "Protocols"; $config_variable[$setting]['name'] = "ISIS sessions"; $config_variable[$setting]['type'] = "bool"; $config_variable[$setting]['shortdesc'] = "Enable collection and display of ISIS data."; one thing I noticed is the bgp, ospf, and eigrp all have the name set to "<protocol> collection" while rip and isis have the name "<protocol> sessions." Finding these settings without a comment like "/* Unimplemented :)" makes me think that ISIS is supported, however I can't seem to find an existing module to support it within the CE. a quick grep of the observium directories seems to show that isis is lacking a poller module like: ./includes/polling/cisco-eigrp.inc.php ./includes/polling/ospf.inc.php ./includes/discovery/bgp-peers.inc.php grep -r 'isis' . (with a lot of output ommited) ./tests/HtmlIncludesFunctionsTest.php: array('isis', 'IS-IS'), ./includes/config-variables.inc.php:$setting = 'enable_isis'; ./includes/defaults.inc.php:$config['enable_isis'] = 1; // Enable ISIS session collection and display ./includes/definitions.inc.php:$config['routing_types']['isis'] = array('text' => 'ISIS'); Does anyone have ISIS working in observium? If so how? Thanks.

2 3

Problem with MIBs
by Xavier Bonell 16 Dec '16

16 Dec '16

Hello; I recently have installed the Community version of Observium on a CentOS 7 server, to test the functionalities and the configurations that gives; to decide if I it's worth to purchase for the Professional one. My question is about how can I select wich MIBs is going to use to obtain data. Because when I go to Devices -> Select Device -> Properties -> MIBs I find a list of MIBs that are used but not suitable for my device. How can I change it? Entering through the server's folders I have seen that are the MIBs that I need. How can I run it to get the appropiate data? Thanks!

2 3

Unable to sort rows by the last column for some data types
by Andy Lemin 15 Dec '16

15 Dec '16

Hi, At the risk of embarrassing myself again and making you laugh, for an obvious typo.. ;) And yes I have definitely checked this time I discovered this weekend that it is not possible to view some of the "Heath" charts in a sorted order. For example, Heath -> Temperature -> Click "Value". The rows seem to be sorted randomly for us. Is anyone else seeing this too? The following also all have the same problem 1) Health -> Processor -> Click "Processor" to sort by processor name, results in random sorting 2) Health -> Memory -> Click "Memory" to sort by Memory name, results in random sorting 3) Health -> Memory -> Click "Used" to sort by Used, results in very random sorting 4) Health -> Temperature -> Click "Value" to sort by temp, results in very random sorting 5) Health -> Fanspeed -> Click "Value" to sort by temp, results in very random sorting 6) Health -> Power -> Click "Value", results in random sorting Cheers, Andy.

4 5

Alerts not being sorted chronological manner
by Youssef BENGELLOUN - ZAHR 14 Dec '16

14 Dec '16

1 2

How to remove unwanted ports
by Ivan Biasi 14 Dec '16

14 Dec '16

Hi all is it possible to remove, or hide, from the "Ports" panel of a device the interfaces for which the polling was disabled ? Thanks, regards I. -- ing. Biasi Ivan Area Ingegneria di Rete Direzione Servizi e Reti TRENTINO NETWORK S.R.L. Via G.Pedrotti, 18 – 38121 - TRENTO Tel : (+39) 0461.020222 Fax : (+39) 0461.020201 Email: ivan.biasi(a)trentinonetwork.it Skype: ivanbiasi https://www.linkedin.com/in/ivanbiasi ________________________________________________________________________________ Società soggetta a direzione e coordinamento da parte della Provincia Autonoma di Trento. REG. IMP. C.F. e P. IVA 01904880224 ________________________________________________________________________________ CONFIDENZIALE: Questo messaggio e gli eventuali allegati sono confidenziali e riservati. Se vi è stato recapitato per errore e non siete fra i destinatari elencati, siete pregati di darne immediatamente avviso al mittente. Le informazioni contenute non devono essere mostrate ad altri, nè utilizzate, memorizzate o copiate in qualsiasi forma. CONFIDENTIAL: This e-mail and any attachments to it may be confidential and may contain private and confidential information. If you are not the intended recipient of this email please notify the sender immediately. Moreover, you must not disclose or distribute its contents to anyone nor copy, store or use its contents in any way.

1 0

Power Supply Status Alarm Check
by Sebastian Klute 14 Dec '16

14 Dec '16

Hi there, I'm getting a bit confused while trying to create an alarm checker for power supply. So it's located under Status with physical class powersupply. Using the actual name would be worthless if this changes. What I want to check is the status of the status. Meaning running or not. I would go for status_type "powersupply" and status_event "running". If this is not true then give me an alarm. But I'm very unsure about the status_type and the correct one to check be cause an event could be "OK" or "FAIL" as well. The purpose is to track if any of the power supplys of our switches fails, so you can do an exchange before the whole switch goes offline. Hope anyone can help me with that. Best regards Sebastian Klute -- Accelerated IT Services GmbH Kruppstraße 105 - 60388 Frankfurt - Germany sk(a)accelerated.de - http://www.accelerated.de/ Phone: +49 69 - 900 180 41 - Fax: +49 69 - 900 180 90 HRB: 60665 - Amtsgericht Ludwigshafen - VatID: DE253684415 Managing Directors: Nicolaj Kamensek & Ole Krieger

1 0

Alert not working
by Eduardo Schoedler 13 Dec '16

13 Dec '16

Hi, I'm not understanding why this alert isn't working. [image: Imagem inline 2] BGP Session state: [image: Imagem inline 1] Thank you. Regards, -- Eduardo Schoedler

3 6

Re: [Observium] OpsGenie Observium Integration
by Halit Okumuş 09 Dec '16

09 Dec '16

Hi Adam, The current integration was made, months ago, according to your old webhook content. And there are existing, in-use configurations in OpsGenie at the moment. We can't just throw them away and change that, can we? That's why we suggested the webhook content before. I don't care how crappy your payload was, we're just trying to make use of the two products together. Alright, cooling down, we can do a rewrite. We'll make a V2 integration which will make use of the fields you mentioned and deprecate our old one. Can you send an example of that request to http://4kmm916oxm9m.runscope.net ? Cheers, Halit On Mon, Dec 5, 2016 at 3:37 PM, Çağla Arıkan <cagla(a)opsgenie.com> wrote: > > > Begin forwarded message: > > *From: *"Adam Armstrong" <adama(a)memetic.org> > *Subject: **Re: [Observium] OpsGenie Observium Integration* > *Date: *5 December 2016 at 15:33:44 GMT+3 > *To: *"" <observium(a)observium.org> > *Reply-To: *Observium Network Observation System <observium(a)observium.org> > > Oh god. I hate when you start looking through contributed code and realise > it was written by someone who hadn't even bothered to make sure it does > what it's supposed to do. > > At the moment the integration sends this payload : > > $payload = array( > "apiKey" => $endpoint['api_key'], > "message" => $message_tags['TITLE'], > "description" => $message_tags['METRICS'] . PHP_EOL . PHP_EOL . > 'Conditions: '. PHP_EOL . $message_tags['CONDITIONS'], > "alias" => $message_tags['ALERT_ID'], > "entity" => $message_tags['DEVICE_HOSTNAME'], > "source" => php_uname('n'), > "details" => array( > "Alert URL" => $message_tags['ALERT_URL'], > "Duration" => $message_tags['DURATION'], > "Hardware" => $message_tags['DEVICE_HARDWARE'], > "OS" => $message_tags['DEVICE_OS'], > "Location" => $message_tags['DEVICE_LOCATION'], > ), > ); > > We're able to supply these fields from our alerting code : > > 'ALERT_STATE' > 'ALERT_URL' > 'ALERT_ID' > 'ALERT_MESSAGE' > 'CONDITIONS' > 'METRICS' > 'DURATION' > 'ENTITY_LINK' > 'ENTITY_NAME' > 'ENTITY_TYPE' > 'ENTITY_DESCRIPTION' > 'ENTITY_GRAPHS_ARRAY' // Json encoded images array > 'DEVICE_HOSTNAME' > 'DEVICE_LINK' > 'DEVICE_HARDWARE' > 'DEVICE_OS' > 'DEVICE_LOCATION' > 'DEVICE_UPTIME' > > The existing integration doesn't seem to provide the actual entity being > alerted information in a useful manner, so could probably do with being > rewritten itself so we can better match the capabilities of the two > platforms. > > adam. > > On 05/12/2016 12:24:21, Adam Armstrong <adama(a)memetic.org> wrote: > Please don't use the generic webhook crap. There's a reason it's marked as > "(Old)" now. > > I get 400 bad request when using either of those URLs. Our OpsGenie > integration (which was contributed a couple of weeks ago) currently sends : > > {"recipients":"","api_key":"2f79c4d5-7c26-4429-8e5b-6e2b936800cc"} > {"apiKey":"2f79c4d5-7c26-4429-8e5b-6e2b936800cc","message":"RECOVER: [ > omega.memetic.org] [processor] [Average] Processor usage is above > 80%","description":"processor_usage = 40\n\nConditions: > \n","alias":"46864","entity":"omega.memetic.org","source":"o > mega.memetic.org","details":{"Alert URL":"http:\/\/dev.observium.org:80 > \/device\/device=12\/tab=alert\/alert_entry=46864\/","Duration":"1m 26s > (2016-12-05 13:20:00)","Hardware":"Generic x86 [64bit]","OS":"Linux > 3.13.0-96-generic Ubuntu 14.04","Location":"Hetzner, Nuremberg, Germany"}} > > Trying to parse an arbitrary text field is a really bad idea when we can > provide that data in separate fields. > > adam. > > On 05/12/2016 12:18:29, Çağla Arıkan <cagla(a)opsgenie.com> wrote: > When you change the URL, the integration will work properly. To make the > integration work properly, we should get the same payload that you send for > generic webhook integration this can be found below: > > { > "originator": "observium sender", > "body": "ALERT: [localhost] [device] device is down\ndevice_status = 0" > } > > We will fix the documents as you described. > > Thanks, > Çağla Arıkan > > On 5 Dec 2016, at 15:12, Adam Armstrong <adama(a)memetic.org> wrote: > > The description for the "add integration" part of OpsGenie also references > to deprecated generic webhook from Observium. Please don't use that. > > Please rewrite your integration to use the specific OpsGenie integration > we provide. > > adam. > > On 05/12/2016 12:03:49, Çağla Arıkan <cagla(a)opsgenie.com> wrote: > Hi there, > > I am a software engineer at OpsGenie. We have developed an integration > specific to Observium. Thus, we would be very pleased if you can fix your > integration so that it uses /v1/json/observium endpoint rather than > /v1/json/alert endpoint. Observium Integration works similar to generic > Webhook integration but we customised it for Observium. You can check our > Observium Integration document for more information which can be found at > https://www.opsgenie.com/docs/integrations/observium-integration. > > Best Regards, > Çağla Arıkan > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > >

3 3

Router stopped polling via Observium
by Youssef BENGELLOUN - ZAHR 06 Dec '16

06 Dec '16

3 7

Weathermap module for observium
by Youssef BENGELLOUN - ZAHR 06 Dec '16

06 Dec '16

6 9

Question about port desr on Fortigate
by MORDAC, Benoit 06 Dec '16

06 Dec '16

Hi, I'm using the Observium professional edition, and I monitor a lot of things, including some Fortigate firewalls. I have upgraded one of them from FortiOS 5.2.x to 5.4.2 release, After this upgrade, observium don't show interfaces names or description. When calling the discovery.php script we should see the port name. ##### Module Start: ports ##### o Caching OIDs ifDescr ifAlias ifName ifType ifOperStatus o Caching DB 46 ports o Discovering ports .............................................. +---------+---------+----------+----------+----------+-------------+---------+ | ifIndex | ifDescr | ifName | ifAlias | ifType | Oper Status | Ignored | +---------+---------+----------+----------+----------+-------------+---------+ | 1 | ... | port1 | ... | ethernet | up | no | | | | | | Csmacd | | | | 2 | ... | port2 | ... | ethernet | down | no | | | | | | Csmacd | | | | 3 | ... | port3 | ... | ethernet | up | no | | | | | | Csmacd | | | ... But it's not visible in the web UI. Maybe it's possible to force Observium to use ifName instead of ifDescr attribute ? I have made a "svn update" on my observium install, the problem is still present. Thanks for your help. Best Regards,

3 2

Intel True Scale Fabric Switch 12800 support
by Jesper Frank Nemholt 05 Dec '16

05 Dec '16

Hi! I wonder if anyone are working on adding support for these devices ? They are QLogic (now Intel) InfiniBand switches and are used on most larger Isilon clusters. The OID is enterprises.10222 I've previously monitored Mellanox IB switches like the SX6036 and these have a good integration, but the Intel ones only report on the management interfaces and nothing else....and I prefer not to spend a day adding support myself if someone else already have done most of the work. snmpwalk -v 2c -c public foo.bar system SNMPv2-MIB::sysDescr.0 = STRING: Intel True Scale Fabric Switch 12800-040 (Master) SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.10222.7.1.2 DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (30516852) 3 days, 12:46:08.52 SNMPv2-MIB::sysContact.0 = STRING: SNMPv2-MIB::sysName.0 = STRING: QLogic 12800-040-254 SNMPv2-MIB::sysLocation.0 = STRING: Main Chassis Unit, Slot 254 SNMPv2-MIB::sysServices.0 = INTEGER: 79 SNMPv2-MIB::sysORLastChange.0 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORID.1 = OID: SNMPv2-SMI::mib-2 SNMPv2-MIB::sysORID.2 = OID: SNMPv2-SMI::mib-2.17 SNMPv2-MIB::sysORID.3 = OID: SNMPv2-MIB::snmpMIB SNMPv2-MIB::sysORID.4 = OID: IF-MIB::ifMIB SNMPv2-MIB::sysORID.5 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIB SNMPv2-MIB::sysORID.6 = OID: SNMP-MPD-MIB::snmpMPDMIB SNMPv2-MIB::sysORID.7 = OID: SNMP-TARGET-MIB::snmpTargetMIB SNMPv2-MIB::sysORID.8 = OID: SNMP-NOTIFICATION-MIB::snmpNotificationMIB SNMPv2-MIB::sysORID.9 = OID: SNMPv2-SMI::transmission.7 SNMPv2-MIB::sysORID.10 = OID: SNMPv2-SMI::mib-2.17.6 SNMPv2-MIB::sysORID.11 = OID: SNMPv2-SMI::mib-2.17.7 SNMPv2-MIB::sysORDescr.1 = STRING: RFC 1213 - (AT, IP, ICMP, TCP, UDP groups) SNMPv2-MIB::sysORDescr.2 = STRING: RFC 1493 - BRIDGE-MIB SNMPv2-MIB::sysORDescr.3 = STRING: RFC 1907 - SNMPv2-MIB (SYSTEM, SNMP) SNMPv2-MIB::sysORDescr.4 = STRING: RFC 2233 - IF-MIB (IF) SNMPv2-MIB::sysORDescr.5 = STRING: RFC 2571 - SNMP-FRAMEWORK-MIB SNMPv2-MIB::sysORDescr.6 = STRING: RFC 2572 - SNMP-MPD-MIB SNMPv2-MIB::sysORDescr.7 = STRING: RFC 2573 - SNMP-TARGET-MIB SNMPv2-MIB::sysORDescr.8 = STRING: RFC 2573 - SNMP-NOTIFICATION-MIB SNMPv2-MIB::sysORDescr.9 = STRING: RFC 2665 - EtherLike-MIB SNMPv2-MIB::sysORDescr.10 = STRING: RFC 2674p - P-BRIDGE-MIB SNMPv2-MIB::sysORDescr.11 = STRING: RFC 2674q - Q-BRIDGE-MIB SNMPv2-MIB::sysORUpTime.1 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.2 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.3 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.4 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.5 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.6 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.7 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.8 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.9 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.10 = Timeticks: (1883) 0:00:18.83 SNMPv2-MIB::sysORUpTime.11 = Timeticks: (1883) 0:00:18.83 /Jesper

1 0

OpsGenie Observium Integration
by Çağla Arıkan 05 Dec '16

05 Dec '16

Hi there, I am a software engineer at OpsGenie. We have developed an integration specific to Observium. Thus, we would be very pleased if you can fix your integration so that it uses /v1/json/observium endpoint rather than /v1/json/alert endpoint. Observium Integration works similar to generic Webhook integration but we customised it for Observium. You can check our Observium Integration document for more information which can be found at https://www.opsgenie.com/docs/integrations/observium-integration <https://www.opsgenie.com/docs/integrations/observium-integration>. Best Regards, Çağla Arıkan

2 5

Interface errors Observium Subscription version
by Afzaal Shabbir 03 Dec '16

03 Dec '16

Dear All, Will it be possible for anyone to help me understand about attached error message on Access Points Wifi interfaces, what they mean and how to fix these errors or where to look for answers regarding these errors. Both interface graphs attached. These are graphs unifi access points wifi0 and wifi1 interfaces. There are no error messages on it's physical interface. Thanks, A

1 0