- observium - lists.observium.org

Netonix support
by Kaiser, Erich 11 Nov '16

11 Nov '16

Also looking for Netonix switch support. Erich Kaiser The Fusion Network erich(a)gotfusion.net Office: 630-621-4804 Cell: 630-777-9291

4 6

Changing logo
by Michael Khalil 11 Nov '16

11 Nov '16

Hello, Is there a way to change the hamster logo on the main page? I am assuming it's a file sitting somewhere i can't figure out where. thanks, -- *Michael Khalil* | System Administrator *CONTROLTEC* 999 Republic Drive, Suite 100, Allen Park, MI 48101 *P* 313.438.5107 *F* 313.982.1305 *www.control-tec.com <http://www.control-tec.com/>* *This e-mail, and any attachments, is intended solely for use by the addressee(s) named above.* *It may contain confidential or proprietary information of Control-Tec LLC, its subsidiaries, affiliates or business partners.* *If you are not the intended recipient of this e-mail or are an unauthorized recipient of the information, you are hereby notified that any dissemination, distribution or copying of this e-mail or any attachments, is strictly prohibited.* *If you have received this e-mail in error, please immediately notify the sender by reply e-mail and permanently delete the original and any copies or printouts.* *Computer viruses can be transmitted via email.* *The recipient should check this e-mail and any attachments for the presence of viruses.* *Control-Tec LLC accepts no liability for any damage caused by any virus transmitted by this e-mail.*

4 5

Observium wrong ports showing as down
by Serghei Golipad 11 Nov '16

11 Nov '16

Hi Guys, Any reason why observium is confusing ports? Gi1/0/42 down down MGMT::abc Gi1/0/44 down down MGMT::def Gi2/0/42 up up MGMT::hij Gi2/0/44 up up MGMT::klm Debug bit: | 10142 | Gi1/0/42 | Ethernet | 100Mbps | 13bps | 112bps | 25.5kB | 223kB | 14.5m | 19.9m | Y | | 10144 | Gi1/0/44 | Ethernet | 100Mbps | 2bps | 101bps | 3.32kB | 201kB | 0 | 5.38m | Y | | 10642 | Gi2/0/42 | Ethernet | 10Mbps | 5.87kbps | 4.41kbps | 11.4MB | 8.59MB | 0.57 | 0.36 | Y | | 10644 | Gi2/0/44 | Ethernet | 10Mbps | 0bps | 6.55kbps | 0B | 12.7MB | 0 | 96.1m | Y | | PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

4 9

packetflux site monitor base /II with temp expansion units
by Möri Andreas 11 Nov '16

11 Nov '16

Bought a packetflux site monitor (base unit II) with 2 temp expansion units (supported by observium)... The site monitor shows all temp probes in the webgui - observium shows only the base unit probes after adding the device... [cid:image001.jpg@01D23BEF.154FF5B0] Any idea how to fix that... add manually ? Andreas Moeri Head of Technology and Operation (CTO) Tel.: +41 (0)32 644 1 822 Mob: +41 (0)79 252 4 364 Fax: +41 (0)32 644 1 161 IM: chmon(a)mathysmedical.com<mailto:chmon@mathysmedical.com> Email: andreas.moeri(a)mathysmedical.com<mailto:andreas.moeri@mathysmedical.com> Mathys AG Bettlach Robert Mathysstr. 5 * Postfach CH-2544 Bettlach * Schweiz Tel.: +41 (0)32 644 1 644 Fax: +41 (0)32 644 1 161 www.mathysmedical.com

1 0

Mimosa support
by Kaiser, Erich 10 Nov '16

10 Nov '16

Will you guys be adding Mimosa Wireless equipment to Observium? Erich Kaiser The Fusion Network erich(a)gotfusion.net Office: 630-621-4804 Cell: 630-777-9291

1 0

adding port to customer group?
by Kaiser, Erich 10 Nov '16

10 Nov '16

How and where do I go to add a port so it shows up in the customer group? Is it something that is done in the database or from backend scripts? Can I combine multiple graphs ? I have been trying to find tutorials on Observium with no luck. Erich Kaiser The Fusion Network erich(a)gotfusion.net Office: 630-621-4804

3 8

Quick filters within device ports view
by Daniel Willcocks 10 Nov '16

10 Nov '16

Hi, Has anyone else got problems when trying to select a quick filter within the Ports tab of a device? When clicking on one filter it seems to select all, hiding all ports. The reset does not release the applied filters, so need to remove part of the URL to get back to unfiltered view. Many Thanks Dan Registered Office: NewVoiceMedia Ltd, NewVoiceMedia House, Jays Close, Basingstoke, Hampshire, RG22 4BS. NewVoiceMedia Registered in England No: 3602868 The information contained in this email, including any attachments, are intended solely for use by the individual or entity to whom it is addressed, and may be confidential. Any views or opinions expressed are solely those of the author and do not necessarily represent those of NewVoiceMedia. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Thank you.

1 0

ports mis-ordered
by rich＠quavey.co.uk 10 Nov '16

10 Nov '16

Hi running Observium 0.16.10.8181 (stable) and when you go into a device and click on "Health > Power" the ports are not being listed in order of ports 1,2,3,4,5. They are being ordered in a list like: 1,10,11,12,13.....,29,3,30 Can this be ordered correctly? See attachment thanks Rich

2 1

Small feature request
by Attila Nagy 09 Nov '16

09 Nov '16

Hi all! I ran into this small deficit a few times, but now I decided to report it, maybe it gets the attention of other fellow users and/or of developers. So the small thing that I miss sometimes from the GUI is the display of the IP address of a device. In my opinion this information should definitely be listed on the overview page, but optimally it should also appear in the tooltip that appears when hovering the mouse (let's say after the FQDN in square brackets). And given the fact that a device can have many IP addresses, I would say lets display the one that the devices FQDN resolves to (mostly this is that I am eager to know). Yes-yes, I know, DNS solves most of the problems, but sometimes it is just easier if you know the IP address. Any opinions? Regards, Tylla

12 26

Changing Logo
by Michael Khalil 09 Nov '16

09 Nov '16

Any way you can change the hamster logo? gotta be somewhere in the apache config just can't find it. thanks, -- *Michael Khalil* | System Administrator *CONTROLTEC* 999 Republic Drive, Suite 100, Allen Park, MI 48101 *P* 313.438.5107 *F* 313.982.1305 *www.control-tec.com <http://www.control-tec.com/>* *This e-mail, and any attachments, is intended solely for use by the addressee(s) named above.* *It may contain confidential or proprietary information of Control-Tec LLC, its subsidiaries, affiliates or business partners.* *If you are not the intended recipient of this e-mail or are an unauthorized recipient of the information, you are hereby notified that any dissemination, distribution or copying of this e-mail or any attachments, is strictly prohibited.* *If you have received this e-mail in error, please immediately notify the sender by reply e-mail and permanently delete the original and any copies or printouts.* *Computer viruses can be transmitted via email.* *The recipient should check this e-mail and any attachments for the presence of viruses.* *Control-Tec LLC accepts no liability for any damage caused by any virus transmitted by this e-mail.*

1 0

Alert when the value is in tolerance [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 08 Nov '16

08 Nov '16

(Embedded image moved to file: pic24126.gif) See attached picture. On the far right is the value of the input for a pair of PDUs. the orange numbers in the middle appear to be the tolerance values. Is there some other thing happening that i don't know about. I have about 30 of these and these two are the only ones doing this alert. thanks Peter Hine Senior Technical Support Engineer (Servers) Corporate Services | Federal Court of Australia ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

1 0

WMI for ubuntu 16.04 64bit
by Idzma Zakaria 08 Nov '16

08 Nov '16

Guys, Any of you having problem installing wmi for Ubuntu 16.04?I have a hard time installing it. I need this to able to detect the processor for windows os.I tried googling but seem all only for ubuntu 12 and 14. After installing tried to #wmic ...its show missing ..not found. -- Kind regards, Idzma Zakaria, ICT Senior Executive ---------------------------------------------------------------------------------------------------------- Australian International School Malaysia (AISM) No.22 Jalan Anggerik, The Mines Resort City, 43300 Seri Kembangan, Selangor, Malaysia. *T:* +60 3 8949 5000 *F*: +60 3 8949 5100 *E*: idzmaz(a)aism.edu.my *W*: http://www.aism.edu.my/ *Direct Line*: ---------------------------------------------------------------------------------------------------------- <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

1 2

Syslog Rules
by Kirk Sam (RXW) IT Network Engineer 08 Nov '16

08 Nov '16

Hi All, Has anyone used the syslog rules/alerts yet? I've tried setting up some simple rules to alert if there are particular messages in the syslog but haven't managed to get any to trigger. I've tried making the rules even simpler, for example setting the rule to /port/ (which occurs in the syslog often) and haven't had it trigger either. If I browse to the syslog and use the message search function it does return results. The syslog has been configured and in use for some time - one of my colleagues set it up and followed the syslog integration guide. Is there any further configuration needed for the syslog rules to enable them or something? Many thanks for your help. Regards, Sam

4 4

Deleting device problems!
by Svensson Fredrik A 07 Nov '16

07 Nov '16

Hi there! When we are deleting a device we struggle with the time it takes, I have done a debug and this seems to be the problem: SQL[DELETE FROM `devices_perftimes` WHERE `device_id` = '593'] ROWS[-1] SQL RUNTIME[97.04324698s] ERROR[Error in query: (The total number of locks exceeds the lock table size) 1206] Can you help me with what I can do to fix this problem? This also take some time: SQL[DELETE FROM `alert_log` WHERE `device_id` = '593'] ROWS[11480] SQL RUNTIME[15.23252392s] Regards Fredrik -----Ursprungligt meddelande----- Från: observium [mailto:observium-bounces@observium.org] För greg lambert Skickat: den 25 oktober 2016 09:41 Till: Observium Network Observation System <observium(a)observium.org> Ämne: [Observium] Acme Packet SBC 3820 Good Day, I just loaded my SBC into observium - it doesn not graph the voice utilization. I was hoping to use it to graph voice channel useage etc. Is there any suggested way to get this graphed? Regards, Greg _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

5 12

Add New Mibs for Huawei Storage
by Jean CARUSO 07 Nov '16

07 Nov '16

Hi, What is the process to integrate the MIBs manufacturer Huawei in Observium? I have the mib files Thank you for your help Regards Jean Caruso Ce message peut contenir des informations confidentielles, couvertes par le secret professionnel ou réservées exclusivement à leur destinataire. Toute lecture, utilisation, diffusion ou divulgation sans autorisation expresse est rigoureusement interdite. Si vous n'en êtes pas le destinataire, merci de prendre contact avec l'expéditeur et de détruire ce message. This email may contain material that is confidential, privileged and/or attorney work product for the sole use of the intended recipient. Any review, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.

2 3

Re: [Observium] CheckPoint alert creation problem
by Moerman, Maarten 07 Nov '16

07 Nov '16

Have you selected the right entity type when adding an alert-checker? It needs to be of type “sensor” , it doesn’t work when you leave it on “device” Maarten From: observium <observium-bounces(a)observium.org> on behalf of Laszlo Nemeth <laszlo.nemeth(a)emarsys.com> Reply-To: Observium Network Observation System <observium(a)observium.org> Date: Friday, October 28, 2016 at 3:37 PM To: Observium Network Observation System <observium(a)observium.org> Subject: [Observium] CheckPoint alert creation problem Hello, I have a CheckPoint 2205 device. It is supported by Observium, so we love it :D I would like to create an alert for it’s fan speed. I do a normal alert like our other looks like: Device: hostname match *cpfw01* Entity match: sensor_class equals fanspeed Test condition: sensor_value greater 3000 With this settings if i push a Rebuild, it shows 0 entities. How can i check what is wrong? I tried to change the fanspeed to temperature, but the problem is similar, 0 entities after rebuild. I attached a picture about the graphs of the device. Hmm... if i run a „rebuild” there are see lot of devices but there is no any „FW” devices however we have more whit this FW prefix. May be this is the problem? It looks like this list doesn’t show all of our devices. Thanks Br Laszlo

4 8

Changing the name of a device
by Youssef BENGELLOUN - ZAHR 07 Nov '16

07 Nov '16

2 2

Re: [Observium] Check IPsec tunnel status on Juniper SRX firewalls
by Youssef BENGELLOUN - ZAHR 07 Nov '16

07 Nov '16

1 1

Force disable 'Neighbours discovery: LLDP-MIB', ['xdp'] = FLASE; not working
by Andy Lemin 06 Nov '16

06 Nov '16

Hi, How can we _Force_ the disablement of discovering hosts via LLDP/XDP? Normally when running poller.php, with '$config['autodiscovery']['xdp'] = FLASE;' set in config.php, everything is fine. However when running '/opt/observium/discovery.php', it finds a switch, and we have LLDP enabled on our servers and switches for other processes related to the management of servers. However this means that Observium takes over an hour to discover a single Virtual Cassis which has 192 ports, with over 100 active servers (all showing up in the LLDP on the switch). Obviously this is a waste of time, and unnecessarily stressful for the servers being scanned and the Observium server. Why is discovery.php not honouring '$config['autodiscovery']['xdp'] = FLASE;' as set in config.php? Cheers, Andy.

3 3

Device Properties - Ports - Toggle Not Working
by Iwanski, Ed 06 Nov '16

06 Nov '16

I tried looking for mailing list archives but didn't find them online, please let me know where to look if I am mistaken. We are on Observium Professional 0.16.10.8181, stable svn update rev 8201 shown so looks up to date. We are having problems using the toggle or disable for an entire column on the device properties port page. I thought it might be a browser issue but I have tried Chrome, Firefox and IE from different computers with no luck. Currently the button just behaves like the save button and submits the form instead of changing the status on the existing page. Any thoughts on what else I could check would be appreciated.

1 0

SSH versus Ping for device_status
by Dano, Leo 03 Nov '16

03 Nov '16

Hi all, I remember back that ssh wasn't supported, in the later versions has this been implemented? We want Observium to notify is a node loses it's ssh capabilities, versus just icmp Thanks, ----------------------- Leo Dano

1 0

Device Down false positive
by Sebastian Klute 03 Nov '16

03 Nov '16

Hi Tom, well it cannot really be that the device is marked as down by alert. Test conditions are as follows: device_status_type ping device_status equals 0 If I understand it correctly, even if snmp is not reachable the device should NOT be marked as down, because it is pingable. Therefore I do not understand why it is still marked as down. Message: 5 Date: Wed, 2 Nov 2016 20:36:19 +0100 From: Tom Laermans <tom.laermans(a)powersource.cx> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Device Down False positive and snmpget Message-ID: <eff1c872-a32b-fe5f-ecb5-eafe35712ff4(a)powersource.cx> Content-Type: text/plain; charset="utf-8"; Format="flowed" Sebastian, The device was likely down due to ping, first... then, as it became pingable but not snmp-able, there was no change logged in device status (down = down). As to why snmpget is telling you 2 is > 128, I'm not sure... Tom On 02/11/2016 20:05, Sebastian Klute wrote: > Hello folks, > > today I got kinda strange problem. I got a Server up and running fine > but it is still shown as device down. "Device status changed to Down > (ping)" > After some debugging and digging into the workflow of polling and > checking egc. I tried to redo the different checks that could lead to > a device down. > First of all: Is it pingable ? > > root@om:/tmp# /usr/bin/fping -t1000 -t 500 -c 20 -q 84.200.41.226 > 84.2xx.xxx.xxx : xmt/rcv/%loss = 20/20/0%, min/avg/max = > 0.20/0.30/0.43 > > seems good to me - no idea why it should be down by ping. > Is the hostname resolvable? Yes it is. Standart ping with hostname is > working fine. > > So I'll dig further into debug logs and found this > > CMD[/usr/bin/snmpget -v2c -c *** -Pu -OQUst -m SNMPv2-MIB -M > /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp > 'udp':'hostname.example':'161' sysObjectID.0 sysUpTime.0] > > CMD EXITCODE[1] > CMD RUNTIME[6.0283s] > STDOUT[ > > ] > STDERR[ > Timeout: No Response from udp:hostname.example:161. > ] > SNMP STATUS[FALSE] > > I wondered why and did it manualy. > The error is as followed: > > Too many object identifiers specified. Only 128 allowed in one > request. > > > The question is now, what can I do to solve this issue? What about the > false positive device down by ping alert? > > > Additional Info: > > > $data - /opt/observium/poller.php:170 > /opt/observium/includes/alerts.inc.php:61 > ========================================= > array( > [device_status] => string(1) "0" > [device_status_type] => string(4) "snmp" > [device_ping] => string(4) "7.34" > [device_snmp] => int(0) > ) > > Thanks for the help and best regards > Sebastian Klute > > -- > Accelerated IT Services GmbH > Kruppstraße 105 - 60388 Frankfurt - Germany > sk(a)accelerated.de -http://www.accelerated.de/ > Phone: +49 69 - 900 180 41 - Fax: +49 69 - 900 180 90 > > HRB: 60665 - Amtsgericht Ludwigshafen - VatID: DE253684415 > Managing Directors: Nicolaj Kamensek & Ole Krieger > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Accelerated IT Services GmbH Kruppstraße 105 - 60388 Frankfurt - Germany sk(a)accelerated.de - http://www.accelerated.de/ Phone: +49 69 - 900 180 41 - Fax: +49 69 - 900 180 90 HRB: 60665 - Amtsgericht Ludwigshafen - VatID: DE253684415 Managing Directors: Nicolaj Kamensek & Ole Krieger

2 1

Squash the Hamster!
by Marc Elvery 03 Nov '16

03 Nov '16

No, let's not stand on the hamster, put the PNG could be a lot smaller. Using observium on a site with a slow line, during the login, the hamster takes longer to load than needed. When I throw the PNG into https://tinypng.com/ It shrinks from 359KB -> 67KB. Seems worthwile. Maybe some other PNG's can be shrunken aswell? Greetings, Marc

1 0

Device Down False positive and snmpget
by Sebastian Klute 02 Nov '16

02 Nov '16

Hello folks, today I got kinda strange problem. I got a Server up and running fine but it is still shown as device down. "Device status changed to Down (ping)" After some debugging and digging into the workflow of polling and checking egc. I tried to redo the different checks that could lead to a device down. First of all: Is it pingable ? root@om:/tmp# /usr/bin/fping -t1000 -t 500 -c 20 -q 84.200.41.226 84.2xx.xxx.xxx : xmt/rcv/%loss = 20/20/0%, min/avg/max = 0.20/0.30/0.43 seems good to me - no idea why it should be down by ping. Is the hostname resolvable? Yes it is. Standart ping with hostname is working fine. So I'll dig further into debug logs and found this CMD[/usr/bin/snmpget -v2c -c *** -Pu -OQUst -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'hostname.example':'161' sysObjectID.0 sysUpTime.0] CMD EXITCODE[1] CMD RUNTIME[6.0283s] STDOUT[ ] STDERR[ Timeout: No Response from udp:hostname.example:161. ] SNMP STATUS[FALSE] I wondered why and did it manualy. The error is as followed: Too many object identifiers specified. Only 128 allowed in one request. The question is now, what can I do to solve this issue? What about the false positive device down by ping alert? Additional Info: > $data - /opt/observium/poller.php:170 /opt/observium/includes/alerts.inc.php:61 ========================================= array( [device_status] => string(1) "0" [device_status_type] => string(4) "snmp" [device_ping] => string(4) "7.34" [device_snmp] => int(0) ) Thanks for the help and best regards Sebastian Klute -- Accelerated IT Services GmbH Kruppstraße 105 - 60388 Frankfurt - Germany sk(a)accelerated.de - http://www.accelerated.de/ Phone: +49 69 - 900 180 41 - Fax: +49 69 - 900 180 90 HRB: 60665 - Amtsgericht Ludwigshafen - VatID: DE253684415 Managing Directors: Nicolaj Kamensek & Ole Krieger

3 3

Call to undefined function mb_strtolower()
by Simon Smith 02 Nov '16

02 Nov '16

Hi All not sure if its me or my setup setup new server, Ubuntu 16.04, 2 core, 4gb ram, 40gb hdd, LXC container I’m getting the following error when I’m running the poller.php PHP Fatal error: Uncaught Error: Call to undefined function mb_strtolower() in /opt/observium/libs/ref.inc.php:968 Stack trace: #0 /opt/observium/libs/ref.inc.php(993): ref::getBacktrace() #1 /opt/observium/libs/ref.inc.php(81): ref::getInputExpressions(Array) #2 /opt/observium/includes/common.inc.php(706): rt(Array) #3 /opt/observium/includes/polling/system.inc.php(213): print_vars(Array) #4 /opt/observium/includes/polling/functions.inc.php(693): include('/opt/observium/...') #5 /opt/observium/poller.php(170): poll_device(Array, Array) #6 {main} thrown in /opt/observium/libs/ref.inc.php on line 968 Fatal error: Uncaught Error: Call to undefined function mb_strtolower() in /opt/observium/libs/ref.inc.php:968 Stack trace: #0 /opt/observium/libs/ref.inc.php(993): ref::getBacktrace() #1 /opt/observium/libs/ref.inc.php(81): ref::getInputExpressions(Array) #2 /opt/observium/includes/common.inc.php(706): rt(Array) #3 /opt/observium/includes/polling/system.inc.php(213): print_vars(Array) #4 /opt/observium/includes/polling/functions.inc.php(693): include('/opt/observium/...') #5 /opt/observium/poller.php(170): poll_device(Array, Array) #6 {main} thrown in /opt/observium/libs/ref.inc.php on line 968 anybody seen these errors before? regards Simon

2 2