- observium - lists.observium.org

Changing the name of a device
by Youssef BENGELLOUN - ZAHR 07 Nov '16

07 Nov '16

2 2

Re: [Observium] Check IPsec tunnel status on Juniper SRX firewalls
by Youssef BENGELLOUN - ZAHR 07 Nov '16

07 Nov '16

1 1

Force disable 'Neighbours discovery: LLDP-MIB', ['xdp'] = FLASE; not working
by Andy Lemin 06 Nov '16

06 Nov '16

Hi, How can we _Force_ the disablement of discovering hosts via LLDP/XDP? Normally when running poller.php, with '$config['autodiscovery']['xdp'] = FLASE;' set in config.php, everything is fine. However when running '/opt/observium/discovery.php', it finds a switch, and we have LLDP enabled on our servers and switches for other processes related to the management of servers. However this means that Observium takes over an hour to discover a single Virtual Cassis which has 192 ports, with over 100 active servers (all showing up in the LLDP on the switch). Obviously this is a waste of time, and unnecessarily stressful for the servers being scanned and the Observium server. Why is discovery.php not honouring '$config['autodiscovery']['xdp'] = FLASE;' as set in config.php? Cheers, Andy.

3 3

Device Properties - Ports - Toggle Not Working
by Iwanski, Ed 06 Nov '16

06 Nov '16

I tried looking for mailing list archives but didn't find them online, please let me know where to look if I am mistaken. We are on Observium Professional 0.16.10.8181, stable svn update rev 8201 shown so looks up to date. We are having problems using the toggle or disable for an entire column on the device properties port page. I thought it might be a browser issue but I have tried Chrome, Firefox and IE from different computers with no luck. Currently the button just behaves like the save button and submits the form instead of changing the status on the existing page. Any thoughts on what else I could check would be appreciated.

1 0

SSH versus Ping for device_status
by Dano, Leo 03 Nov '16

03 Nov '16

Hi all, I remember back that ssh wasn't supported, in the later versions has this been implemented? We want Observium to notify is a node loses it's ssh capabilities, versus just icmp Thanks, ----------------------- Leo Dano

1 0

Device Down false positive
by Sebastian Klute 03 Nov '16

03 Nov '16

Hi Tom, well it cannot really be that the device is marked as down by alert. Test conditions are as follows: device_status_type ping device_status equals 0 If I understand it correctly, even if snmp is not reachable the device should NOT be marked as down, because it is pingable. Therefore I do not understand why it is still marked as down. Message: 5 Date: Wed, 2 Nov 2016 20:36:19 +0100 From: Tom Laermans <tom.laermans(a)powersource.cx> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Device Down False positive and snmpget Message-ID: <eff1c872-a32b-fe5f-ecb5-eafe35712ff4(a)powersource.cx> Content-Type: text/plain; charset="utf-8"; Format="flowed" Sebastian, The device was likely down due to ping, first... then, as it became pingable but not snmp-able, there was no change logged in device status (down = down). As to why snmpget is telling you 2 is > 128, I'm not sure... Tom On 02/11/2016 20:05, Sebastian Klute wrote: > Hello folks, > > today I got kinda strange problem. I got a Server up and running fine > but it is still shown as device down. "Device status changed to Down > (ping)" > After some debugging and digging into the workflow of polling and > checking egc. I tried to redo the different checks that could lead to > a device down. > First of all: Is it pingable ? > > root@om:/tmp# /usr/bin/fping -t1000 -t 500 -c 20 -q 84.200.41.226 > 84.2xx.xxx.xxx : xmt/rcv/%loss = 20/20/0%, min/avg/max = > 0.20/0.30/0.43 > > seems good to me - no idea why it should be down by ping. > Is the hostname resolvable? Yes it is. Standart ping with hostname is > working fine. > > So I'll dig further into debug logs and found this > > CMD[/usr/bin/snmpget -v2c -c *** -Pu -OQUst -m SNMPv2-MIB -M > /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp > 'udp':'hostname.example':'161' sysObjectID.0 sysUpTime.0] > > CMD EXITCODE[1] > CMD RUNTIME[6.0283s] > STDOUT[ > > ] > STDERR[ > Timeout: No Response from udp:hostname.example:161. > ] > SNMP STATUS[FALSE] > > I wondered why and did it manualy. > The error is as followed: > > Too many object identifiers specified. Only 128 allowed in one > request. > > > The question is now, what can I do to solve this issue? What about the > false positive device down by ping alert? > > > Additional Info: > > > $data - /opt/observium/poller.php:170 > /opt/observium/includes/alerts.inc.php:61 > ========================================= > array( > [device_status] => string(1) "0" > [device_status_type] => string(4) "snmp" > [device_ping] => string(4) "7.34" > [device_snmp] => int(0) > ) > > Thanks for the help and best regards > Sebastian Klute > > -- > Accelerated IT Services GmbH > Kruppstraße 105 - 60388 Frankfurt - Germany > sk(a)accelerated.de -http://www.accelerated.de/ > Phone: +49 69 - 900 180 41 - Fax: +49 69 - 900 180 90 > > HRB: 60665 - Amtsgericht Ludwigshafen - VatID: DE253684415 > Managing Directors: Nicolaj Kamensek & Ole Krieger > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Accelerated IT Services GmbH Kruppstraße 105 - 60388 Frankfurt - Germany sk(a)accelerated.de - http://www.accelerated.de/ Phone: +49 69 - 900 180 41 - Fax: +49 69 - 900 180 90 HRB: 60665 - Amtsgericht Ludwigshafen - VatID: DE253684415 Managing Directors: Nicolaj Kamensek & Ole Krieger

2 1

Squash the Hamster!
by Marc Elvery 03 Nov '16

03 Nov '16

No, let's not stand on the hamster, put the PNG could be a lot smaller. Using observium on a site with a slow line, during the login, the hamster takes longer to load than needed. When I throw the PNG into https://tinypng.com/ It shrinks from 359KB -> 67KB. Seems worthwile. Maybe some other PNG's can be shrunken aswell? Greetings, Marc

1 0

Device Down False positive and snmpget
by Sebastian Klute 02 Nov '16

02 Nov '16

Hello folks, today I got kinda strange problem. I got a Server up and running fine but it is still shown as device down. "Device status changed to Down (ping)" After some debugging and digging into the workflow of polling and checking egc. I tried to redo the different checks that could lead to a device down. First of all: Is it pingable ? root@om:/tmp# /usr/bin/fping -t1000 -t 500 -c 20 -q 84.200.41.226 84.2xx.xxx.xxx : xmt/rcv/%loss = 20/20/0%, min/avg/max = 0.20/0.30/0.43 seems good to me - no idea why it should be down by ping. Is the hostname resolvable? Yes it is. Standart ping with hostname is working fine. So I'll dig further into debug logs and found this CMD[/usr/bin/snmpget -v2c -c *** -Pu -OQUst -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'hostname.example':'161' sysObjectID.0 sysUpTime.0] CMD EXITCODE[1] CMD RUNTIME[6.0283s] STDOUT[ ] STDERR[ Timeout: No Response from udp:hostname.example:161. ] SNMP STATUS[FALSE] I wondered why and did it manualy. The error is as followed: Too many object identifiers specified. Only 128 allowed in one request. The question is now, what can I do to solve this issue? What about the false positive device down by ping alert? Additional Info: > $data - /opt/observium/poller.php:170 /opt/observium/includes/alerts.inc.php:61 ========================================= array( [device_status] => string(1) "0" [device_status_type] => string(4) "snmp" [device_ping] => string(4) "7.34" [device_snmp] => int(0) ) Thanks for the help and best regards Sebastian Klute -- Accelerated IT Services GmbH Kruppstraße 105 - 60388 Frankfurt - Germany sk(a)accelerated.de - http://www.accelerated.de/ Phone: +49 69 - 900 180 41 - Fax: +49 69 - 900 180 90 HRB: 60665 - Amtsgericht Ludwigshafen - VatID: DE253684415 Managing Directors: Nicolaj Kamensek & Ole Krieger

3 3

Call to undefined function mb_strtolower()
by Simon Smith 02 Nov '16

02 Nov '16

Hi All not sure if its me or my setup setup new server, Ubuntu 16.04, 2 core, 4gb ram, 40gb hdd, LXC container I’m getting the following error when I’m running the poller.php PHP Fatal error: Uncaught Error: Call to undefined function mb_strtolower() in /opt/observium/libs/ref.inc.php:968 Stack trace: #0 /opt/observium/libs/ref.inc.php(993): ref::getBacktrace() #1 /opt/observium/libs/ref.inc.php(81): ref::getInputExpressions(Array) #2 /opt/observium/includes/common.inc.php(706): rt(Array) #3 /opt/observium/includes/polling/system.inc.php(213): print_vars(Array) #4 /opt/observium/includes/polling/functions.inc.php(693): include('/opt/observium/...') #5 /opt/observium/poller.php(170): poll_device(Array, Array) #6 {main} thrown in /opt/observium/libs/ref.inc.php on line 968 Fatal error: Uncaught Error: Call to undefined function mb_strtolower() in /opt/observium/libs/ref.inc.php:968 Stack trace: #0 /opt/observium/libs/ref.inc.php(993): ref::getBacktrace() #1 /opt/observium/libs/ref.inc.php(81): ref::getInputExpressions(Array) #2 /opt/observium/includes/common.inc.php(706): rt(Array) #3 /opt/observium/includes/polling/system.inc.php(213): print_vars(Array) #4 /opt/observium/includes/polling/functions.inc.php(693): include('/opt/observium/...') #5 /opt/observium/poller.php(170): poll_device(Array, Array) #6 {main} thrown in /opt/observium/libs/ref.inc.php on line 968 anybody seen these errors before? regards Simon

2 2

Systems no longer show up
by Macklin, Jason 01 Nov '16

01 Nov '16

Good day everyone! We are no longer seeing anything via the webui. I suspect it is due to a loss of network connectivity over the weekend. Seeing the following in the db.log now: Failed dbQuery (#2006 - MySQL server has gone away) Initial investigation seems to suggest that the client has become disconnected from the mariadb server (they are the same system) and so I'm wondering if there is an easy recovery method. Restarting services has not worked and the server has been rebooted. Still no change. Any help is greatly appreciated! Cheers, Jason -- *Jason Macklin* Lead Consultant - Sequencing Solution Center R&D Roche Molecular Systems | 4300 Hacienda Drive | Pleasanton, CA 94588 | USA T: +1 925 730 8458 | M: +1 925 353 7409 | E: *jason.macklin(a)roche.com <jason.macklin(a)roche.com>*

2 4

unsubscribe
by Justin Smith 01 Nov '16

01 Nov '16

1 0

Changing content of email alerts
by Boyard Engels 31 Oct '16

31 Oct '16

Team, I want to change the content of the alerts that are sent out, what is the easiest way to achieve that? bo

2 1

Re: [Observium] Reset License
by ron＠rjr-services.com 31 Oct '16

31 Oct '16

Back up and restore your SQL database... Get Outlook for Android On Mon, Oct 31, 2016 at 7:25 AM -0600, "Erwin Heringa" <erwin.heringa(a)sidn.nl> wrote: -- This message has been scanned by E.F.A. Project and is believed to be clean.

5 5

Reset License
by Andrew Colin 31 Oct '16

31 Oct '16

I am in the process of migrating to a new server I am running the enterprise edition, How do I reset my svn code?

7 10

BGP Mikrotik
by Andrew Colin 31 Oct '16

31 Oct '16

Hi Guys Is there a mib available to pull BGP stats from a mikrotik yet?

2 4

Alerting. Could I check the Status
by Lee Byatt 29 Oct '16

29 Oct '16

Good evening guys, Could I kindly check out the status of the Mail alerts on the SVN version please? Are they supported and do they work as I have an alert cheker on my setup but they not getting to my inbox. I have a config like this in the config.php $config['email_backend'] = 'sendmail'; // Mail backend. Allowed: "mail" (PHP's built-in), "sendmail", "smtp". $config['email_from'] = '"Observium Network Monitor"<observium@MYDOMAIN>'; // Mail from. Default: "OBSERVIUM Network Monito$ $config['email_sendmail_path'] = '/usr/sbin/sendmail'; // The location of the sendmail program. $config['email_smtp_host'] = 'MYRELAY; // Outgoing SMTP server name. $config['email_smtp_port'] = 25; // The port to connect. $config['email_smtp_timeout'] = 10; // SMTP connection timeout in seconds. $config['email_smtp_secure'] = NULL; // Enable encryption. Use 'tls' or 'ssl' $config['email_smtp_auth'] = FALSE; // Whether or not to use SMTP authentication. $config['email_smtp_username'] = NULL; // SMTP username. $config['email_smtp_password'] = NULL; // Password for SMTP authentication. // Alerting Settings $config['alerts']['email']['default'] = 'me; // Default alert recipient $config['alerts']['email']['default_only'] = TRUE; // Only use default recipient $config['alerts']['email']['enable'] = TRUE; // Enable email alerts $config['alerts']['bgp']['whitelist'] = NULL; // Populate as an array() with ASNs to alert on. $config['alerts']['port']['ifdown'] = TRUE; // Generate alerts for ports that go down $config['alerts']['port']['ifdown_types'] = array('core', 'transit', 'peering'); // Generate alerts for ports that go down $config['alerts']['interval'] = 86400; // How frequently to re-send a notification for a continuing alert condition // In seconds. Default is 1 day. I have this setup running in parallel with Nagios and would like to turn this off very soon. Thanks Lee Visit http://www.excellgroup.com/solutions/ to learn about our Voice, Cloud / Data, Network, Mobile and Business Centres solutions. Contact Us: http://www.excellgroup.com/contact/ This email is subject to Excell’s Email Terms & Conditions which can be found at http://www.excellgroup.com/legal-and-terms/email-terms-conditions/

2 1

CheckPoint alert creation problem
by Laszlo Nemeth 28 Oct '16

28 Oct '16

Hello, I have a CheckPoint 2205 device. It is supported by Observium, so we love it :D I would like to create an alert for it’s fan speed. I do a normal alert like our other looks like: Device: hostname match *cpfw01* Entity match: sensor_class equals fanspeed Test condition: sensor_value greater 3000 With this settings if i push a Rebuild, it shows 0 entities. How can i check what is wrong? I tried to change the fanspeed to temperature, but the problem is similar, 0 entities after rebuild. I attached a picture about the graphs of the device. Hmm... if i run a „rebuild” there are see lot of devices but there is no any „FW” devices however we have more whit this FW prefix. May be this is the problem? It looks like this list doesn’t show all of our devices. Thanks Br Laszlo

1 0

Acme Packet SBC 3820
by greg lambert 28 Oct '16

28 Oct '16

Good Day, I just loaded my SBC into observium - it doesn not graph the voice utilization. I was hoping to use it to graph voice channel useage etc. Is there any suggested way to get this graphed? Regards, Greg

2 1

Mailing List Archives
by Richard Savage 27 Oct '16

27 Oct '16

Hi Just wondered if there is any progress in getting the mailing list archives fixed? I think it would help a lot in reducing the amount of questions that are the same on the mailing list as there is no history. Just a thought? Thanks Rich

1 0

Port Discards Graphs
by Vater, Wolfgang 27 Oct '16

27 Oct '16

Hi, I would like to get a graph on the ports for discards. I created an alert for that and I see I get data for discards tx and rx. But how can I see a graph for that? Wolfgang

2 2

ignore mount regex for freenas storage points
by Simon Smith 27 Oct '16

27 Oct '16

Hi All observium is picking up on the jails running on our freenas cube they are also picking up on a few storage points that are always full 100% of the time and I’m trying to exclude them from showing them $config['ignore_mount_regexp'][] is what i need to do (i think?) but I’m not 100% sure what the regex should be? below are sample of the storage point names /mnt/Drive1/Jails/observium/dev /mnt/Drive1/Jails/plex/proc /compact/linux/prox /dev/fd any help would be lovely community! regards Simon

1 0

Alerts for IPSec Tunnels
by Jesper Grahn 27 Oct '16

27 Oct '16

Hi, is there a way to create Alert checks for IPSec Tunnels? And how do you set a Tunnel Name for a IPSec Tunnel on a Cisco 5505? /Jesper

5 4

Transceiver alerts checkers
by Youssef BENGELLOUN - ZAHR 27 Oct '16

27 Oct '16

3 4

Fallback authentication
by Youssef BENGELLOUN - ZAHR 26 Oct '16

26 Oct '16

4 9

Disable alert reminders being sent
by Oliver Baker 26 Oct '16

26 Oct '16

Hi there, I'd like to set up Observium's alerts so that we only receive 1 alert email, and no more are sent even if the alert condition persists. I've set the following in config.php but I am not sure if it will give the desired effect: $config['alerts']['interval'] = 0; Is this the correct way to achieve this? Are there any further steps that need to be taken? Many thanks Oliver Baker

4 4