- observium - lists.observium.org

Re: [Observium] Unable to access SVN
by Serghei Golipad 23 May '16

23 May '16

Same here, asking for auth and fails. From: observium <observium-bounces(a)observium.org> on behalf of "chott(a)praha1.net" <chott(a)praha1.net> Reply-To: Observium Network Observation System <observium(a)observium.org> Date: Monday, 23 May 2016 at 16:40 To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Unable to access SVN Yes, i have same problem today Tom From: observium [mailto:observium-bounces@observium.org] On Behalf Of Dominik Nowacki Sent: Monday, May 23, 2016 5:36 PM To: observium(a)observium.org Subject: [Observium] Unable to access SVN Hi, We’re unable to access SVN using our valid subscription (unauthorised error, yes username and password is definitely correct) and I don’t see a better place to contact the team about it. How do we get assistance? Thanks! Kind Regards, Dom PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

3 3

Unable to access SVN
by Dominik Nowacki 23 May '16

23 May '16

Hi, We're unable to access SVN using our valid subscription (unauthorised error, yes username and password is definitely correct) and I don't see a better place to contact the team about it. How do we get assistance? Thanks! Kind Regards, Dom

2 1

Alerting debugging
by Dominik Nowacki 23 May '16

23 May '16

Hi All, I was wondering if there is any way of debugging pushover alerts? We have an entry in the alert log about the "Alert notification sent". The message was never delivered (we use Pushover), and the Application info in the Pushover interface doesn't say there was any message attempted. How to debug it? We're on Observium 0.16.5.7823 (stable) Thanks! Kind Regards, Dom

2 1

subscription past_due DOH
by Simon Smith 23 May '16

23 May '16

Hi All our subscription ran out yesterday and we forgot to change our card details so our subscription wasn’t renewed I’ve clicked the modify button on our subscription on the subs page and updated our details now what do i do? how long does it take? the is another button at the bottom of the page saying 'Purchase Subscription' and I’m worried if i do that ill get a new user and pass OR be charged twice also the is no contact information on the Observium website hense why I’m having to email the General list instead Regards Simon

2 5

Smokeping for alerts
by Andrew Colin 23 May '16

23 May '16

Hi Guys Is it possible to use smokeping to do the checks and send alerts vs the normal way? I find smokeping to be more reliable Regards Andrew

2 1

Adding device fail
by Mohd Zainal Abidin Rabani 21 May '16

21 May '16

Hi, Where i can see log that show detail about error/fail? Last time i adding device using ubuntu, no problem. Regards, Mohd Zainal Abidin Rabani Technical Support

2 1

Alert Dependencies
by Spencer Ryan 20 May '16

20 May '16

I've asked about this before but how hard would it be for you guys to implement alert dependencies? The easiest way I can think of doing it would be to simply let us set a "parent" device for anything, and if that device is offline don't send any alerts for downstream devices. For example we have a testlab that has no UPS/Generator power that we monitor about 200 devices, when the building loses power we get those 200 alarms about devices being offline, when in reality there is a single 6500 as the gateway, and if that switch is offline, i know the rest will be. We don't want to disable the offline alarms because we do want to know when individual devices drop out. Thanks! *Spencer Ryan* | Senior Systems Administrator | sryan(a)arbor.net *Arbor Networks* +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com

3 8

Re: [Observium] monitoring fileZilla ftp server on Windows 2008R2 bestpractice ?
by PROST pierrick 20 May '16

20 May '16

I extend my question :) .... generally : - for a Windows 2K server , how can we do service monitoring ? - for web server , how can we run check tcp/udp ports 80 - 8080 over network ? regards ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Which is the best way to monitore à fileZilla ftp server runing on windows Server 2008R2 with observium ? Can I run à check on port 21 from observium poller ? We have just taken the annual support for observium ... nice tools! Regards. Pierrick Prost Service du Système d'Information CNRS Délégation Régionale Rhône Auvergne 2, avenue Albert Einstein - BP61335 69609 VILLEURBANNE CEDEX www.dr7.cnrs.fr<http://www.dr7.cnrs.fr>

2 3

RRD Files - Error Drawing Graph - Before you groan, its limited to OpenBSD and I have an RRDCommand.. ; )
by Andy Lemin 20 May '16

20 May '16

Hi, On Observium commercial, all of our OpenBSD firewalls fail to draw the "Processors" graph on the device Overview page :( However if you go to the "Graphs" tab on the Device page, the "Processors" graphs do draw.. It seems to only be limited to the "Overview" tab on the device page. Our Linux servers, Cisco, HP gear etc are all fine. For both the OpenBSD firewalls and the Linux servers, the Processors graph on the Overview page seems to be based on "Device (ucd_ss_cpu)". But the Processors graph which does work looks to be based on "Device (processor)". So it seems that "Device (ucd_ss_cpu)" is not populated for OpenBSD, where Observium thinks it should be. Here is the RRD Command for a failing one; root@intermap:/opt/observium/rrd/ar1406.live.brandwatch.net# /usr/bin/rrdtool graph /tmp/11MUfpl7O7LSQtoX.png -g -Y --lower-limit 0 --alt-autoscale-max --start 1463587788 --end 1463674188 --width 1152 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DroidSansMono,DejaVuSansMono' --font AXIS:7:'DroidSansMono,DejaVuSansMono' --font-render-mode normal -E COMMENT:' Now Min Max Avg' COMMENT:'\l' CDEF:total= HRULE:0#555555 ERROR: String ends after the = sign on 'CDEF:total=' Here is the RRD Command for a Linux device which works; root@intermap:/opt/observium/rrd/ar1406.live.brandwatch.net# /usr/bin/rrdtool graph /tmp/vskuqlACvSuyBGUW.png -g -Y --lower-limit 0 --alt-autoscale-max --start 1463587973 --end 1463674373 --width 1152 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DroidSansMono,DejaVuSansMono' --font AXIS:7:'DroidSansMono,DejaVuSansMono' --font-render-mode normal -E COMMENT:' Now Min Max Avg' COMMENT:'\l' DEF:ssCpuRawUser=/opt/observium/rrd/ ar1406.live.brandwatch.net/ucd_ssCpuRawUser.rrd:value:AVERAGE DEF:ssCpuRawNice=/opt/observium/rrd/ ar1406.live.brandwatch.net/ucd_ssCpuRawNice.rrd:value:AVERAGE DEF:ssCpuRawSystem=/opt/observium/rrd/ ar1406.live.brandwatch.net/ucd_ssCpuRawSystem.rrd:value:AVERAGE DEF:ssCpuRawWait=/opt/observium/rrd/ ar1406.live.brandwatch.net/ucd_ssCpuRawWait.rrd:value:AVERAGE DEF:ssCpuRawInterrupt=/opt/observium/rrd/ ar1406.live.brandwatch.net/ucd_ssCpuRawInterrupt.rrd:value:AVERAGE DEF:ssCpuRawSoftIRQ=/opt/observium/rrd/ ar1406.live.brandwatch.net/ucd_ssCpuRawSoftIRQ.rrd:value:AVERAGE DEF:ssCpuRawKernel=/opt/observium/rrd/ ar1406.live.brandwatch.net/ucd_ssCpuRawKernel.rrd:value:AVERAGE DEF:ssCpuRawIdle=/opt/observium/rrd/ ar1406.live.brandwatch.net/ucd_ssCpuRawIdle.rrd:value:AVERAGE CDEF:total=ssCpuRawUser,UN,0,ssCpuRawUser,IF,ssCpuRawNice,UN,0,ssCpuRawNice,IF,ssCpuRawSystem,UN,0,ssCpuRawSystem,IF,ssCpuRawWait,UN,0,ssCpuRawWait,IF,ssCpuRawInterrupt,UN,0,ssCpuRawInterrupt,IF,ssCpuRawSoftIRQ,UN,0,ssCpuRawSoftIRQ,IF,ssCpuRawKernel,UN,0,ssCpuRawKernel,IF,ssCpuRawIdle,UN,0,ssCpuRawIdle,IF,+,+,+,+,+,+,+ CDEF:ssCpuRawUser_perc=ssCpuRawUser,total,/,100,* CDEF:ssCpuRawNice_perc=ssCpuRawNice,total,/,100,* CDEF:ssCpuRawSystem_perc=ssCpuRawSystem,total,/,100,* CDEF:ssCpuRawWait_perc=ssCpuRawWait,total,/,100,* CDEF:ssCpuRawInterrupt_perc=ssCpuRawInterrupt,total,/,100,* CDEF:ssCpuRawSoftIRQ_perc=ssCpuRawSoftIRQ,total,/,100,* CDEF:ssCpuRawKernel_perc=ssCpuRawKernel,total,/,100,* CDEF:ssCpuRawIdle_perc=ssCpuRawIdle,total,/,100,* HRULE:0#555555 AREA:ssCpuRawUser_perc#c02020:'User ' GPRINT:ssCpuRawUser_perc:LAST:%5.1lf%% GPRINT:ssCpuRawUser_perc:MIN:%5.1lf%% GPRINT:ssCpuRawUser_perc:MAX:%5.1lf%% GPRINT:ssCpuRawUser_perc:AVERAGE:%5.1lf%%\n AREA:ssCpuRawNice_perc#008f00:'Nice ':STACK GPRINT:ssCpuRawNice_perc:LAST:%5.1lf%% GPRINT:ssCpuRawNice_perc:MIN:%5.1lf%% GPRINT:ssCpuRawNice_perc:MAX:%5.1lf%% GPRINT:ssCpuRawNice_perc:AVERAGE:%5.1lf%%\n AREA:ssCpuRawSystem_perc#ea8f00:'System ':STACK GPRINT:ssCpuRawSystem_perc:LAST:%5.1lf%% GPRINT:ssCpuRawSystem_perc:MIN:%5.1lf%% GPRINT:ssCpuRawSystem_perc:MAX:%5.1lf%% GPRINT:ssCpuRawSystem_perc:AVERAGE:%5.1lf%%\n AREA:ssCpuRawWait_perc#1f78b4:'Wait ':STACK GPRINT:ssCpuRawWait_perc:LAST:%5.1lf%% GPRINT:ssCpuRawWait_perc:MIN:%5.1lf%% GPRINT:ssCpuRawWait_perc:MAX:%5.1lf%% GPRINT:ssCpuRawWait_perc:AVERAGE:%5.1lf%%\n AREA:ssCpuRawInterrupt_perc#a6cee3:'Interrupt ':STACK GPRINT:ssCpuRawInterrupt_perc:LAST:%5.1lf%% GPRINT:ssCpuRawInterrupt_perc:MIN:%5.1lf%% GPRINT:ssCpuRawInterrupt_perc:MAX:%5.1lf%% GPRINT:ssCpuRawInterrupt_perc:AVERAGE:%5.1lf%%\n AREA:ssCpuRawSoftIRQ_perc#b2df8a:'SoftIRQ ':STACK GPRINT:ssCpuRawSoftIRQ_perc:LAST:%5.1lf%% GPRINT:ssCpuRawSoftIRQ_perc:MIN:%5.1lf%% GPRINT:ssCpuRawSoftIRQ_perc:MAX:%5.1lf%% GPRINT:ssCpuRawSoftIRQ_perc:AVERAGE:%5.1lf%%\n AREA:ssCpuRawKernel_perc#fb9a99:'Kernel ':STACK GPRINT:ssCpuRawKernel_perc:LAST:%5.1lf%% GPRINT:ssCpuRawKernel_perc:MIN:%5.1lf%% GPRINT:ssCpuRawKernel_perc:MAX:%5.1lf%% GPRINT:ssCpuRawKernel_perc:AVERAGE:%5.1lf%%\n AREA:ssCpuRawIdle_perc#f5f5e5:'Idle ':STACK GPRINT:ssCpuRawIdle_perc:LAST:%5.1lf%% GPRINT:ssCpuRawIdle_perc:MIN:%5.1lf%% GPRINT:ssCpuRawIdle_perc:MAX:%5.1lf%% GPRINT:ssCpuRawIdle_perc:AVERAGE:%5.1lf%%\n 1233x339 Failing OpenBSD Example; Working Linux Example; Thank you very much for your time, and a great system. The more I use Observium, the more I love it. Cheers, Andy.

3 6

monitoring fileZilla ftp server on Windows 2008R2 bestpractice ?
by PROST pierrick 20 May '16

20 May '16

Hi Everyone, Which is the best way to monitore à fileZilla ftp server runing on windows Server 2008R2 with observium ? Can I run à check on port 21 from observium poller ? We have just taken the annual support for observium ... nice tools! Regards. Pierrick Prost Service du Système d'Information CNRS Délégation Régionale Rhône Auvergne 2, avenue Albert Einstein - BP61335 69609 VILLEURBANNE CEDEX www.dr7.cnrs.fr<http://www.dr7.cnrs.fr>

1 0

Package not available
by Mohd Zainal Abidin Rabani 20 May '16

20 May '16

Hi, I saw some package not available on centos 6.7 when install using yum. Any workaround for this issue? No package php-posix.x86_64 available. No package php-mcrypt.x86_64 available. No package vixie-cron.x86_64 available. No package fping.x86_64 available. Regards, Mohd Zainal Abidin Rabani Technical Support

1 0

Ownership
by Mohd Zainal Abidin Rabani 20 May '16

20 May '16

Hi, Is this correct ownership? [root@observium observium]# ll total 204 -rwxrwxr-x 1 1000 1000 8432 Jan 15 16:37 add_device.php -rwxrwxr-x 1 1000 1000 1890 Jan 15 16:37 adduser.php -rwxrwxr-x 1 1000 1000 3629 Jan 15 16:37 alerter.php -rwxrwxr-x 1 1000 1000 943 Jan 15 16:37 alerts.php -rwxrwxr-x 1 1000 1000 1571 Jan 15 16:37 check-errors.php -rwxrwxr-x 1 1000 1000 2548 Jan 15 16:37 check-services.php -rw-r--r-- 1 root root 1001 May 19 18:17 config.php -rw-rw-r-- 1 1000 1000 998 Dec 17 13:17 config.php.default -rw-rw-r-- 1 1000 1000 466 Jan 15 16:37 config_to_json.php -rwxrwxr-x 1 1000 1000 1272 Jan 15 16:37 delete_device.php -rwxrwxr-x 1 1000 1000 7994 Jan 16 00:03 discovery.php -rwxrwxr-x 1 1000 1000 4042 Jan 15 16:37 housekeeping.php drwxrwxr-x 10 1000 1000 4096 May 4 20:38 html drwxrwxr-x 14 1000 1000 4096 Jan 26 22:35 includes -rw-rw-r-- 1 1000 1000 165 Oct 4 2015 INSTALL -rwxrwxr-x 1 1000 1000 10750 Jan 15 16:37 irc.php drwxrwxr-x 7 1000 1000 4096 Jan 15 16:37 libs -rw-rw-r-- 1 1000 1000 2323 Jan 26 22:35 LICENSE.COMMUNITY drwxr-xr-x 2 root root 4096 May 20 09:32 logs drwxrwxr-x 156 1000 1000 24576 Jan 20 00:01 mibs -rwxrwxr-x 1 1000 1000 7236 Jan 15 16:37 poller.php -rwxrwxr-x 1 1000 1000 14763 Oct 4 2015 poller-wrapper.py -rw-rw-r-- 1 1000 1000 990 Oct 4 2015 README -rwxrwxr-x 1 1000 1000 1670 Jan 15 16:37 rename_device.php drwxr-xr-x 2 apache apache 4096 May 19 18:19 rrd drwxrwxr-x 4 1000 1000 4096 Jan 26 17:21 scripts -rw-rw-r-- 1 1000 1000 29 Oct 4 2015 snmp.conf.example -rw-rw-r-- 1 1000 1000 385 Oct 4 2015 snmpd.conf.example -rwxrwxr-x 1 1000 1000 1033 Jan 15 16:37 snmptrap.php -rwxrwxr-x 1 1000 1000 1468 Jan 15 16:37 syslog.php drwxrwxr-x 5 1000 1000 4096 Oct 4 2015 templates -rwxrwxr-x 1 1000 1000 1818 Jan 15 16:37 test_alert.php drwxrwxr-x 4 1000 1000 4096 Jan 15 16:37 tests drwxrwxr-x 2 1000 1000 12288 Jan 16 22:05 update OS: Centos 6.7 Final x86_64. Regards, Mohd Zainal Abidin Rabani Technical Support

2 1

Help needed with unix-agent
by Gaurav Chaturvedi 19 May '16

19 May '16

Hello, I have installed ubuntu on virtual machine, configured bind and unix-agent successfully, in observium were able to see the application "bind" and all the graphs related to bind were displayed. After few days, I made a copy of vmware virtual machine (on which bind was running), added it to observium (with new IP), telnet to 36605 shows the output related to bind but observium showing that no application is running on the new virtual machine. so, 2 queries: 1) what am i missing? 2) How to debug step by step Regards Gaurav

4 6

Getting error
by Mohd Zainal Abidin Rabani 19 May '16

19 May '16

Hi, I'm getting error when try access detail about my swicth. I already add device from CLI. I want to see detail in webUI. This error get from ubuntu 16.04 LTS. Refer attachment. Now i try to install using centos 6. I want to see if same error come out. Regards, Mohd Zainal Abidin Rabani Technical Support ModernOne Data Solutions Sdn. Bhd. [ Dedicated Server | VPS | Co-Location | Hosting ] [ Managed Service | System Integration | Domain ] W : www.nocser.net FB: http://www.facebook.com/nocser Twitter: @nocsertech Skype: zabidin5417

2 1

Re: [Observium] Missed Allowed Value in CDR/95th Percentile
by ChanTy 18 May '16

18 May '16

Any comment ? From: observium <observium-bounces(a)observium.org> on behalf of Ty Chan <ty.chan(a)corp.mekongnet.com.kh> Reply-To: Observium Network Observation System <observium(a)observium.org> Date: Monday, May 16, 2016 at 10:52 AM To: Observium Network Observation System <observium(a)observium.org> Subject: [Observium] Missed Allowed Value in CDR/95th Percentile Hi, Allowed value is usually missed from Billing report as below: any comment? Regards, chanty _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Juniper logical interface confuse
by Eduardo Schoedler 18 May '16

18 May '16

I think Observium is confusing interfaces. Just now I reactivated a logical unit in juniper (xe-0/0/1.1698) and Observium thinks is ae0.3550. In event log: 2016-05-17 19:36:27 ae0.3550 IP address added: 2804:x:x:x:x:x:x:x/126 2016-05-17 19:36:27 ae0.3550 IP address added: 177.x.x.x/30 2016-05-17 19:36:24 ae0.3550 Interface DELETED mark removed [image: Imagem inline 1] In Juniper: login@rtr> show interfaces snmp-index 544 *Logical interface xe-0/0/1.1698 *(Index 332) (*SNMP ifIndex 544*) Description: VLAN-xxxxxxxxxxxxxxx Flags: Up SNMP-Traps 0x0 VLAN-Tag [ 0x8100.1698 ] Encapsulation: ENET2 Input packets : 490 Output packets: 4075 Protocol inet, MTU: 1500 Flags: Sendbcast-pkt-to-re, User-MTU, Sample-input Addresses, Flags: Is-Preferred Is-Primary Destination: 177.x.x.x/30, Local: 177.x.x.x, Broadcast: 177.x.x.x Protocol inet6, MTU: 1500 Flags: User-MTU, Sample-input Addresses, Flags: Is-Preferred Is-Primary Destination: 2804:x:x:x:x:x:x:x/126, Local: 2804:x:x:x:x:x:x:x I will send in private the discovery to Mike and Adam. Thank you! -- Eduardo Schoedler

1 0

Brocade VDX Switch
by ffuentes 18 May '16

18 May '16

Hello Team, We just moved from Extreme to Brocade and found out that Observium does not detect properly the VDX Switch stack. It just has the logo with a "?". Any ideas if the VDX line from brocade will be add it to the Professional Version? Regards, -- Fernando Fuentes Supervisor & Senior Systems Administrator Email: ffuentes(a)aasteel.com American Alloy Steel, Inc. Houston, Texas Website: http://www.aasteel.com Phone: 713-744-4222 Fax: 713-300-5688

4 13

DPKG version listing order
by Alex Winder ( M5i Limited ) 17 May '16

17 May '16

Hi all, We've recently added the DPKG agent to some of our Debian hosts so that we can keep on top of what's up-to-date and what isn't. So far it's been quite helpful, except I have one small niggle with it, the way that it lists the version orders of the packages. See below: The nginx version on the above are listed in the order of: 1.8.0 1.8.1 1.9.11 1.9.12 1.9.14 1.9.15 1.9.5 1.9.9 Where if they were listed in version order they would be listed: 1.8.0 1.8.1 1.9.5 1.9.9 1.9.11 1.9.12 1.9.14 1.9.15 Is there anyway that this can be worked around, or is there any plan to implement a fix? Thanks, Alex.

2 1

Re: [Observium] Citrix Netscaler vServer
by Richard Wigzell 16 May '16

16 May '16

Thank you all for the replies and screenshots; they have been most helpful. I have one more question regarding the custom OID monitor, has anyone used this to capture BPDU counters? Specific use case: We cannot currently send syslog messages from all our network devices to the Observium host and would be looking to use BPDU counters as an indication that a spanning-tree event had occurred. I would also be interested to hear what others have done regarding spanning-tree alerts etc. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/> From: observium [mailto:observium-bounces@observium.org] On Behalf Of Moerman, Maarten Sent: 13 May 2016 14:29 To: Observium Network Observation System Subject: Re: [Observium] Citrix Netscaler vServer Hi, See a LB vserver pool, and the vserver stats below: Vserver lists all services, and aggregated stats of the pool itself Service has: bits, packets, connections, requests, ttfb & surgecount There’s also more tcp stuff & ssl stuff in other tabs Maarten From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Adam Armstrong <adama(a)memetic.org<mailto:adama@memetic.org>> Reply-To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Date: Friday, May 13, 2016 at 1:39 PM To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Subject: Re: [Observium] Citrix Netscaler vServer Hi, We don't really have a trial beyond CE (which effectively is the trial), but if you guys have Netscalers, the 150 quid is certainly super cheap for the amount of data we collect from them. Our Netscaler support is developed in conjunction with eBay to monitor their load balancer platform, so it's one of the more actively developed parts of our code. If you ask nicely, perhaps someone will be able to generate some screenshots or something :D Adam. Sent from BlueMail<http://www.bluemail.me/r> On May 13, 2016, at 11:57, Richard Wigzell <richard.wigzell(a)it.ox.ac.uk<mailto:richard.wigzell@it.ox.ac.uk>> wrote: Thank you all for the replies. Is it possible to trial the subscription edition? We would be interested to see this functionality as well as the custom OID monitor. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/> From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 09 May 2016 14:19 To: Observium Network Observation System Subject: Re: [Observium] Citrix Netscaler vServer CE does not support netscaler, you need a subscription for that. Adam. Sent from BlueMail<http://www.bluemail.me/r> On May 9, 2016, at 15:14, prost pierrick <pierrick.prost(a)cnrs.fr<mailto:pierrick.prost@cnrs.fr>> wrote: Hello, Have you tried a SNMP WALK on your equipment ? De : observium [mailto:observium-bounces@observium.org] De la part de Richard Wigzell Envoyé : lundi 9 mai 2016 14:51 À : 'observium(a)observium.org<mailto:'observium(a)observium.org>' Objet : [Observium] Citrix Netscaler vServer Hello, we have a Citrix Netscaler (x2 HA) that we monitor but there is no Loadbalancer Tab on the device page. So we are unable to see vServers info etc. Have ensured that the SNMP view is FULL as opposed to Read only on the device themselves. Both nodes are running Citrix Netscaler NS10.5 (Build 57.7.nc) Running CE 0.16.1.7533 (26th January 2016). Am I correct in thinking that I should be able to see vServer info? If so some suggestions to resolve this would be welcome. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/> ________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Missed Allowed Value in CDR/95th Percentile
by ChanTy 16 May '16

16 May '16

Hi, Allowed value is usually missed from Billing report as below: any comment? Regards, chanty

1 0

VMware polling broken?
by Ron Marosko 15 May '16

15 May '16

Hi guys, I think something got broken in polling of ESXI servers… not sure where exactly, but on or about 4 May, the “Operating System” section changed from the full build information to “Operating system VMware (build-)”. In “showtech” it looks like it’s this line: features=>build- Or am I smoking a green leafy substance? ….Ron -- This message has been scanned by E.F.A. Project and is believed to be clean.

1 0

Alert on high availability status change on Checkpoint
by Robin Cook 13 May '16

13 May '16

Hello, We have a few checkpoint firewalls and I am looking to generate email alerts when the HA status changes from OK to critical. The Observium logs look a bit like this when it occurs: 2016-05-12 16:58:30 High Availability (standby) Status Alert: cpnew02 High Availability (standby) entered ALERT state: CRITICAL (previous: OK) 2016-05-12 16:58:28 cpfw04 Features -> ClusterXL inactive or machine is down 2016-05-11 10:30:04 High Availability (standby) Status updated: checkpoint-ha-state haStatCode.0 High Availability (standby) 2016-05-11 10:28:03 High Availability (standby) Status Ok: cpnew02 High Availability (down) entered OK state: OK (previous: CRITICAL) Does anyone have any advice on how to build the alert checker for this? The high Availability icon looks to be a traffic lights one while the devices themselves show as the normal device icon - so I think they may be discovered as separate entities. I am also a bit unsure on how to filter to the OS "Check Point GAiA R77.45 (standby)" so for now have just been using device type firewall. Many thanks, Robin -------------------------------------------------------------------------------------------------------------------------------------------------- This message is for the designated recipient(s) only and may contain privileged, proprietary, and/or confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the email by you is prohibited. Any views or opinions expressed are solely those of the author and do not necessarily represent those of MDSL. -------------------------------------------------------------------------------------------------------------------------------------------------- Registered Information MARKET DATA SERVICES LIMITED, FLOOR 2 BUILDING 4, CENTURY PLACE, LAMBERTS ROAD, TUNBRIDGE WELLS, KENT, TN2 3EH, UNITED KINGDOM Company No: 03031342 | VAT Reg. No.: GB624962327

2 1

(no subject)
by Andy Lemin 13 May '16

13 May '16

Haha, Yea I'm not brave enough to cut myself on bleeding edge ;) Just "Stable" here as its prod.. Thanks for being so quick! On Fri, May 13, 2016 at 2:46 PM, Adam Armstrong <adama(a)memetic.org> wrote: > That was done 10 minutes ago... > > Unless you're all confused and running stable! :DDD > > adam. > > On 13/05/2016 14:43:03, Andy Lemin <andy(a)brandwatch.com> wrote: > Haha, damn hipster hidden pages.. Haha ;) > > Thanks Adam, I have added "$config['web_enable_showtech'] = 1;" to my > config.php > > I will await the code update :) > > Thanks, Andy. > > On Fri, May 13, 2016 at 2:31 PM, Adam Armstrong <adama(a)memetic.org> wrote: > >> I've added this to the device "cog" menu, when enabled in the config >> (web_enable_showtech = true in config.php, or Web UI -> General -> Enable >> 'show tech' option in web-config editor) >> >> adam. >> >> On 13/05/2016 14:17:23, Adam Armstrong <adama(a)memetic.org> wrote: >> Shh. You're not supposed to know that tab exists! :P >> >> adam. >> >> On 13/05/2016 14:15:17, Andy Lemin <andy(a)brandwatch.com> wrote: >> Hi, >> >> Does anyone know how to unhide the "showtech" tab for all the devices? >> >> For example, go to somewhere like; >> https://observium/device/device=17/tab=ports/ >> >> And change the "ports" for "showtech". >> >> http://observium/device/device=<device_id>/tab=showtech/ >> >> This page is useful, and would be nice to have the button on >> the device page instead of having to remember a URL hack, when debugging >> missing data or problems monitoring devices etc (esp when using rancid and >> smokeping like we do). >> >> Hoping their is a secret config.php switch :) >> >> Thanks, Andy. >> _______________________________________________ observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> > _______________________________________________ observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >

1 0

Unhide the hidden showtech tab
by Andy Lemin 13 May '16

13 May '16

Hi, Does anyone know how to unhide the "showtech" tab for all the devices? For example, go to somewhere like; https://observium/device/device=17/tab=ports/ And change the "ports" for "showtech". http://observium/device/device=<device_id>/tab=showtech/ This page is useful, and would be nice to have the button on the device page instead of having to remember a URL hack, when debugging missing data or problems monitoring devices etc (esp when using rancid and smokeping like we do). Hoping their is a secret config.php switch :) Thanks, Andy.

2 4

Re: [Observium] Citrix Netscaler vServer
by Moerman, Maarten 13 May '16

13 May '16

Hi, See a LB vserver pool, and the vserver stats below: Vserver lists all services, and aggregated stats of the pool itself Service has: bits, packets, connections, requests, ttfb & surgecount There’s also more tcp stuff & ssl stuff in other tabs Maarten [cid:389CB59F-C0E4-4CE5-9B5B-3F1307456575][cid:F9A6342F-F0EE-4362-A4FE-4CF6889949F4] From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Adam Armstrong <adama(a)memetic.org<mailto:adama@memetic.org>> Reply-To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Date: Friday, May 13, 2016 at 1:39 PM To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Subject: Re: [Observium] Citrix Netscaler vServer Hi, We don't really have a trial beyond CE (which effectively is the trial), but if you guys have Netscalers, the 150 quid is certainly super cheap for the amount of data we collect from them. Our Netscaler support is developed in conjunction with eBay to monitor their load balancer platform, so it's one of the more actively developed parts of our code. If you ask nicely, perhaps someone will be able to generate some screenshots or something :D Adam. Sent from BlueMail<http://www.bluemail.me/r> On May 13, 2016, at 11:57, Richard Wigzell <richard.wigzell(a)it.ox.ac.uk<mailto:richard.wigzell@it.ox.ac.uk>> wrote: Thank you all for the replies. Is it possible to trial the subscription edition? We would be interested to see this functionality as well as the custom OID monitor. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/> From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 09 May 2016 14:19 To: Observium Network Observation System Subject: Re: [Observium] Citrix Netscaler vServer CE does not support netscaler, you need a subscription for that. Adam. Sent from BlueMail<http://www.bluemail.me/r> On May 9, 2016, at 15:14, prost pierrick <pierrick.prost(a)cnrs.fr<mailto:pierrick.prost@cnrs.fr>> wrote: Hello, Have you tried a SNMP WALK on your equipment ? De : observium [mailto:observium-bounces@observium.org] De la part de Richard Wigzell Envoyé : lundi 9 mai 2016 14:51 À : 'observium(a)observium.org<mailto:'observium(a)observium.org>' Objet : [Observium] Citrix Netscaler vServer Hello, we have a Citrix Netscaler (x2 HA) that we monitor but there is no Loadbalancer Tab on the device page. So we are unable to see vServers info etc. Have ensured that the SNMP view is FULL as opposed to Read only on the device themselves. Both nodes are running Citrix Netscaler NS10.5 (Build 57.7.nc) Running CE 0.16.1.7533 (26th January 2016). Am I correct in thinking that I should be able to see vServer info? If so some suggestions to resolve this would be welcome. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Networks, Security and Server Specialist IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/> ________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0