- observium - lists.observium.org

Observium r7765 - MIBS hwgroup
by chott＠praha1.net 25 Apr '16

25 Apr '16

Hello Today i testing new MIB for HWGroup for PWR devices, but Observium dont recognize Tom

3 6

Port showing DOT1Q in access mode
by chott＠praha1.net 25 Apr '16

25 Apr '16

Hello team, I found this issue, in Cisco Small Business switches Observium shows Ethernet 100Mbps (full) MTU 1500 dot1Q But ports is configure as Access, if i check Cisco 3750G with IOS Observium working fine Tomas

2 1

Re: [Observium] observium Digest, Vol 69, Issue 110
by Müller, Gabriel 25 Apr '16

25 Apr '16

Hi Adam Thanks, indeed, it is looking strange when doing an snmp walk about sensors. Sup will anyway get replaced within the next days due to some other issues. Will check again after it has been replaced, Br Gabriel Today's Topics: 1. Re: Missing Port Sensors in VSS Setup (Adam Armstrong) ---------------------------------------------------------------------- Message: 1 Date: Sun, 24 Apr 2016 21:48:31 +0100 From: Adam Armstrong <adama(a)memetic.org> To: Observium Network Observation System <observium(a)observium.org> Cc: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Missing Port Sensors in VSS Setup Message-ID: <c0194c1b-b1e6-418e-adcc-32204cbc0a9b(a)typeapp.com> Content-Type: text/plain; charset="utf-8" support(a)cisco.com ? Adam. Sent from BlueMail On Apr 24, 2016, 20:35, at 20:35, "Müller, Gabriel" <Gabriel.Mueller(a)awk.ch> wrote: >Hi > >We having a Cisco VSS setup (Catalyst 4506 with Sup8-E). Observium only >displays Sensor Port information of first supervisor. We have SFP+ with >DOM support, displaying a lot of information, unfortunately, Observium >only displays information of SFP+ in first Supervisor. > >Any idea? > >Many thanks, >Br >Gabriel > >________________________________________ > >Gabriel Müller, Senior Consultant >Tel. +41 58 411 95 17 >gabriel.mueller(a)awk.ch > >AWK Group AG, Leutschenbachstrasse 45 >CH-8050 Zürich, www.awk.ch<http://www.awk.ch/> > >[Xing]<https://www.xing.com/company/awk> [Linkedin] ><http://www.linkedin.com/company/awk-group> [Facebook] ><https://www.facebook.com/awkgroup> >________________________________________ > > > >----------------------------------------------------------------------- >- > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20160424/29f246c…> ------------------------------ Subject: Digest Footer _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ------------------------------ End of observium Digest, Vol 69, Issue 110 ******************************************

1 0

location magic
by Rob VanHooren 24 Apr '16

24 Apr '16

DNS LOC records are still a thing. https://en.wikipedia.org/wiki/LOC_record https://www.daftlogic.com/sandbox-google-maps-find-altitude.htm https://www.fcc.gov/media/radio/dms-decimal R. e.g. adam.example.org. IN LOC 55 35 58.449 N 79 38 15.811 W 53m 10m 10m 10m > On Apr 23, 2016, at 11:26, observium-request(a)observium.org wrote: > > It ends up on the canary islands, which is where we put devices we can't find a location for.

2 2

Google Maps
by Alasdair MacLeod 23 Apr '16

23 Apr '16

Hi Guys, On the main dashboard you see a google maps picture. None of my devices are displayed correctly on the map. How do I specify which devices appear where? I assume it’s to do with the Contact field. Thanks guys.

5 9

mounting a new filesystem
by Ross [Eve IT] 23 Apr '16

23 Apr '16

Hi all, Apologies if this has been asked before, or I've missed it in the list; I recently added a new drive to a server, and mounted the new drive to a directory. Edited output. root@tethys:~# df -h Filesystem Size Used Avail Use% Mounted on rootfs 85G 2.4G 79G 3% / /dev/sdb1 148G 2.8G 138G 2% /netflow As you can see in the screenshot below, it shows the root directory ~2.5GB, but not the /netflow dir which is at 2.8GB. [image: Inline image 1] Am I missing something here ? I assume I should be seeing 2 lines, 1 for / and 1 for /netflow as they are different disks. Or if this graph is supposed to represent / in total, it should be over 5GB.. Thanks for your time :) Ross.

2 2

Alert Conditions - Check Conditions
by Dave Strydom 23 Apr '16

23 Apr '16

Hi, I'm trying to setup an Alert for monitoring Fortigate Sessions. For testing I have a Check Condition of "fortigate_sessions gt 100" The issue I am finding is that the check is matching again percentage and not value. The fortigate has 200 sessions currently, so it should trigger the alert, but it doesn't because it seems to be monitoring percentage and the percentage is constantly 100% How do I check against the value of 200 instead of percentage? Regards, Dave

1 0

Re: [Observium] Adding KB Document to Observium
by Sathish Kumar Ippani 22 Apr '16

22 Apr '16

Is any have any idea?. From: Sathish Kumar Ippani [mailto:sathish.i@ctrls.in] Sent: Monday, April 18, 2016 11:45 AM To: observium(a)observium.org Subject: Adding KB Document to Observium Hello All, Is there any way that I can add a KB Document related to alerts to mail alert. So Engineers will open the document and do troubleshoot the alert. sathish

2 1

Geolocalisation resets after housekeeping
by Pascal Minery 21 Apr '16

21 Apr '16

Hi, After the last observium update, I started to see the following bug : - Manually entered location on devices is automaticaly replaced by it’s snmp value after the daily « /opt/observium/housekeeping.php -ya » trigered by cron. Here some log of a device : 2016-04-20 20:36:59 mgt-ac038.artecad.local Geolocation (GOOGLE) -> [33.697950, -111.986414] United States (Country), Arizona (State), Maricopa (County), Phoenix (City) 2016-04-20 20:36:59 mgt-ac038.artecad.local Location -> 'Expeditions' 2016-04-20 15:49:35 Port 1 Interface changed: [ifSpeed] '1000000000' -> '10000000'; [ifHighSpeed] '1000' -> '10'; [ifLastChange] '2016-04-20 06:57:47' -> '2016-04-20 15:49:33' 2016-04-20 08:27:17 mgt-ac038.artecad.local Geolocation (GOOGLE) -> [47.223503, 7.102975] Switzerland (Country), Canton of Bern (State), Courtelary (County), Tramelan (City) 2016-04-20 08:27:17 mgt-ac038.artecad.local Location -> 'Artecad SA, 2720 Tramelan' For the test, I forced again today the location and executed a housekeeping in a short time after : 2016-04-21 14:42:33 mgt-ac038.artecad.local Geolocation (GOOGLE) -> [33.697950, -111.986414] United States (Country), Arizona (State), Maricopa (County), Phoenix (City) 2016-04-21 14:42:32 mgt-ac038.artecad.local Location -> 'Expeditions' 2016-04-21 13:58:41 mgt-ac038.artecad.local Geolocation (GOOGLE) -> [40.139723, -111.405206] United States (Country), Utah (State), Utah (County), Springville (City) 2016-04-21 13:58:40 mgt-ac038.artecad.local Location -> 'test1' This is a new behaviour since the last update. The manual location should be forced and not modified by the snmp value. Can this be corrected ? Thank you. Cordiales salutations, Pascal Minery [cid:image1cefeb.PNG@85510f60.4ca4db60] Pascal Minery Ingénieur réseau Virtual Computer SA Grand-Rue 75 2720 Tramelan CH - Switzerland Direct +41 32 486 80 83 Tél. +41 32 486 80 80 Fax +41 32 486 80 81 email pascal.minery(a)virtualcomputer.ch<mailto:pascal.minery@virtualcomputer.ch>

1 0

libvirt config
by Jesper Frank Nemholt 21 Apr '16

21 Apr '16

Hi! I get this error when enabling libvirt. This is on a CentOS 7 with Qemu : ##### *Module Start: **virtual-machines* ##### Virtual machines: Libvirt VM: Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password). Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password). I have configured the following in config.php : $config['enable_libvirt'] = 1; # Enable Libvirt VM support $config['libvirt_protocols'] = array("qemu+ssh","xen+ssh"); # Mechanisms used, add or remove if not using this on any of your machines. What else is needed ? I assume either username/password or key based access, but does this have to be set for the user running the observium poller/discovery or elsewhere ? /Jesper

2 1

http-auth issue . [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 21 Apr '16

21 Apr '16

I created a dev instance (CE: 0.16.1.7533 ) to investigate the wmi / win2k8 unknown processor issue. This correctly shows the processor but doesn't auto login with " AuthBasicFake guest guest" in the apache conf like the production one does. to setup : cp config.php.default config.php sed -i -e s:USERNAME:observium: -e s:PASSWORD:xxxxx: -e 's:"public":"xxxxxxxxx", "public":' config.php (added fping location and proxy info to config.php) ./discovery.php -u ./adduser.php admin xxxx 10 ./adduser.php guest guest 5 ./add_device.php $HOSTNAME going to https://observium.dev.gov.au, i can login as either guest or admin and see everything correctly. I added "AuthBasicFake guest guest" to the apache config and restarted apache. but it won't login automagically. I edited html/index.php and added the following at line 97 print_vars($_SERVER); this shows me that "AuthBasicFake" is working PHP_AUTH_USER=>guest PHP_AUTH_PW=>guest is there a step that i missed ??? thanks Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine(a)familycourt.gov.au ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

1 1

Observium Geolocation Not as Manual Configuration in Config.php
by Idzma Zakaria 20 Apr '16

20 Apr '16

Hi, I manually config geolocation as below details. // Geocoding Setting $config['geocoding']['enable'] = TRUE; // Enable Geocoding $config['geocoding']['api'] = 'google'; // Which GEO API use ('mapquest', 'google', 'yahoo', 'openstreetmap', 'yandex') $config['geocoding']['api_key'] = 'sjfasdjhfdsjlkfjsdjfaldj'; // API KEY if required $config['geocoding']['default']['lat'] = '13.0731060'; // Default latitude $config['geocoding']['default']['lon'] = '80.1937312'; // Default longitude Why it wont follow my manual configuration in config.php?All my devices are all over the world. Really appreciate if someone can assist me on this. Thank you. -- Kind regards, Idz -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

4 12

problem with overall traffic view
by emilio brambilla 20 Apr '16

20 Apr '16

hello, I found a little problem (maybe not a bug, but I think is not so good). if I use "overall_traffic" aggregation (ie for peering) observium make a graph with stacking the traffic from all the ports with a description starting with a label (ie "peering:"), and it works ok. but if I modify a port (ie dismiss a peering, removing also the "peering:" label from the router interface) observium remove all the pregress traffic the old interface did from the 'peering' graph, so you lose part of the old stats :-( isn't it possible to have the overall_traffic collected in a dedicated rrd, use the sum of labelled interfaces for new data and use the rrd data for the old data in order to have a real historic data even if I change a port? thanks -- bye, emilio

2 1

Unknown Processor Type
by Idzma Zakaria 19 Apr '16

19 Apr '16

Hi , I'm a new user and my version is 0.16.3.7703 (22nd March 2016) Professional.I having problem and also trying to find a solution where after I installed observium on my debian and as a result I got Processor type is Unknown.I tried to look for a solution everwhere but no avail.This seem only happen to windows type OS only.Any advice would be appreciated. -- Kind regards, Idz -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

4 8

Re: [Observium] observium Digest, Vol 69, Issue 74
by David Everitt 19 Apr '16

19 Apr '16

The includes/definitions/os.inc.php file has a do not edit disclaimer at the top. Is there a file I can make changes to to add the 'remote access' options? I may have edited the file anyway and the options propagated appropriately to the devices. Will these changes be reverted during a svn up? Thank you On Sun, Apr 17, 2016 at 7:48 PM, <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > Today's Topics: > > 1. Re: add ssh option to device (Adam Armstrong) > 2. F5 / CPU Metric (Michael Ebbels) > 3. Re: Zhone MXK Support on Observium (ChanTy) > 4. Re: F5 / CPU Metric (Adam Armstrong) > > > ---------- Forwarded message ---------- > From: Adam Armstrong <adama(a)memetic.org> > To: Observium Network Observation System <observium(a)observium.org> > Cc: Observium Network Observation System <observium(a)observium.org> > Date: Fri, 15 Apr 2016 19:01:58 +0100 > Subject: Re: [Observium] add ssh option to device > > Hi, > > These are set on a per-OS basis in the is definitions. > > Adam. > > Sent from BlueMail <http://www.bluemail.me/r> > > On Apr 15, 2016, at 17:57, David Everitt <deveritt(a)gprep.com> wrote: >> >> We have the option to connect to some devices via the options shown in >> the screenshot below: >> [image: Inline image 1] >> However, our switches (Force10) don't have those options. As shown below. >> [image: Inline image 2] >> Is there a way to add those options to devices that need them? >> >> Thank you, >> >> ------------------------------ >> >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> > > ---------- Forwarded message ---------- > From: Michael Ebbels <michael.ebbels(a)equatetechnologies.com.au> > To: observium(a)observium.org > Cc: > Date: Mon, 18 Apr 2016 11:28:31 +1000 > Subject: [Observium] F5 / CPU Metric > Hi All, > > Receiving the follow error from a monitored F5 hardware appliance. > > The CPU usage reported is way out, anyone come across this or similar > issue? > > See below. > > ALERT <observium(a)observium.org>Modify > <http://pdcbigipmgt01.ch4.com.au/device/device=3/tab=alert/alert_entry=340/> > *Alert*Processor usage is now greater than 80% for three subsequent tests. > *Entity*TMM 0.6 Processor > <http://pdcbigipmgt01.ch4.com.au/device/device=3/tab=health/metric=processor/> > *Conditions*processor_usage greater 80 (4294967295)*Metrics*processor_usage > = 4294967295 > > -- > Michael > > > ---------- Forwarded message ---------- > From: ChanTy <ty.chan(a)corp.mekongnet.com.kh> > To: Observium Network Observation System <observium(a)observium.org> > Cc: > Date: Mon, 18 Apr 2016 08:43:10 +0700 > Subject: Re: [Observium] Zhone MXK Support on Observium > > Hi Adam, > > > > If I need to do custom development, how long does it take and cost ? > > > > Regards, > > chanty > > > > *From: *observium <observium-bounces(a)observium.org> on behalf of Adam > Armstrong <adama(a)memetic.org> > *Reply-To: *Observium Network Observation System <observium(a)observium.org> > *Date: *Monday, April 11, 2016 at 3:27 PM > *To: *Observium Network Observation System <observium(a)observium.org> > *Subject: *Re: [Observium] Zhone MXK Support on Observium > > > > MIBs don't do what you think they do. > > Please read the FAQ. > > Adam. > > Sent from BlueMail <http://www.bluemail.me/r> > > On Apr 11, 2016, at 09:24, ChanTy <ty.chan(a)corp.mekongnet.com.kh> wrote: > > Hi Adam, > > > > How to fix it? Since we already have MIB in the directory? > > > > Regards, > > chanty > > > > *From: *observium <observium-bounces(a)observium.org> on behalf of Adam > Armstrong <adama(a)memetic.org> > *Reply-To: *Observium Network Observatio n System <observium(a)observium.org > > > *Date: *Monday, April 11, 2016 at 3:07 PM > *To: *Observium Network Observation System <observium(a)observium.org> > *Subject: *Re: [Observium] Zhone MXK Support on Observium > > > > If the device wasn't detected as anything, we don't have support for it. > > I think we have specific detection for some Zhone, but perhaps not that > device. > > Adam. > > Sent from BlueMail <http://www.bluemail.me/r> > > On Apr 11, 2016, at 08:36, ChanTy <ty.chan(a)corp.mekongnet.com.kh> wrote: > > Hi , > > > > I see ZHONE directory in /opt/observium/mibs/zhone. I added Zhone MKX to > Observium but it seems that Observium did not recognize the OS type. > > How to specify the type of OS ? then Observium can use Zhone MIB to query > data ? > > > > Regards, > > chanty > > > > *From: *observium <observium-bounces(a)observium.org> on behalf of Ty Chan < > ty.chan(a)corp.mekongnet.com.kh> > *Reply-To: *Observium Network Observation System <observium(a)observium.org> > *Date: *Friday, April 8, 2016 at 12:07 PM > *To: *Observium Network Observation System <observium(a)observium.org> > *Subject: *[Observium] Zhone MXK Support on Observium > > > > Hi > > > > Does Observium support Zhone (http://www.zhone.com) ? > > > > Thanks, > > chanty > > _______________________________________________ observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > ------------------------------ > > > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > _______________________________________________ observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > ------------------------------ > > > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > _______________________________________________ observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > ---------- Forwarded message ---------- > From: Adam Armstrong <adama(a)memetic.org> > To: Observium Network Observation System <observium(a)observium.org> > Cc: Observium Network Observation System <observium(a)observium.org> > Date: Mon, 18 Apr 2016 03:48:09 +0100 > Subject: Re: [Observium] F5 / CPU Metric > > Your device seems to be returning an invalid number :) > > It'll likely fix itself when it next reboots, or gets a firmware update. > > Adam. > > Sent from BlueMail <http://www.bluemail.me/r> > > On Apr 18, 2016, at 02:28, Michael Ebbels < > michael.ebbels(a)equatetechnologies.com.au> wrote: >> >> Hi All, >> >> Receiving the follow error from a monitored F5 hardware appliance. >> >> The CPU usage reported is way out, anyone come across this or similar >> issue? >> >> See below. >> >> ALERT <observium(a)observium.org>Modify >> <http://pdcbigipmgt01.ch4.com.au/device/device=3/tab=alert/alert_entry=340/> >> *Alert*Processor usage is now greater than 80% for three subsequent >> tests.*Entity*TMM 0.6 Processor >> <http://pdcbigipmgt01.ch4.com.au/device/device=3/tab=health/metric=processor/> >> *Conditions*processor_usage greater 80 (4294967295)*Metrics*processor_usage >> = 4294967295 >> > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >

1 0

Printer toner alert
by Attila Nagy 19 Apr '16

19 Apr '16

Hi All! I'm fairly new with the alerts, so don't hit me too hard. :) I'm trying to create an alert checker for some printers, it should send an alert when the toner level is below 5%. The associations seem OK, at least my Device Match rule "|type equals printer|" (with an "*" entity match) yields all the printers in Observium. But the condition rule seems suspect to me. Based on the documentation and the examples I wrote: |"supply_value lt 5%" |but it shows everything OK on all printers, despite of having at least 3 printers with 1% toner cartridge. Could you help me, what am I doing wrong, or what's missing? Btw: I'm using the latest CE version. Should I include some more information? Regards, Tylla

3 12

Customizing Recent Events
by Sandor Kocsis 18 Apr '16

18 Apr '16

Dear all, I’d like to put a filter on “Recent Events” section of the dashboard, but I could not find any information regarding that. Now the section is too chatty, for example I see lots of these messages: Et140/1/48 Interface changed: [ifDuplex] '' -> ‘unknown’ or Et141/1/39 Interface changed: [ifDuplex] '' -> 'fullDuplex' But what I’d like to see is when an interface goes up and down, and hide not important messages if possible. Sandor

1 0

Adding KB Document to Observium
by Sathish Kumar Ippani 18 Apr '16

18 Apr '16

Hello All, Is there any way that I can add a KB Document related to alerts to mail alert. So Engineers will open the document and do troubleshoot the alert. sathish

1 0

Re: [Observium] Zhone MXK Support on Observium
by ChanTy 18 Apr '16

18 Apr '16

Hi , I see ZHONE directory in /opt/observium/mibs/zhone. I added Zhone MKX to Observium but it seems that Observium did not recognize the OS type. How to specify the type of OS ? then Observium can use Zhone MIB to query data ? Regards, chanty From: observium <observium-bounces(a)observium.org> on behalf of Ty Chan <ty.chan(a)corp.mekongnet.com.kh> Reply-To: Observium Network Observation System <observium(a)observium.org> Date: Friday, April 8, 2016 at 12:07 PM To: Observium Network Observation System <observium(a)observium.org> Subject: [Observium] Zhone MXK Support on Observium Hi Does Observium support Zhone (http://www.zhone.com) ? Thanks, chanty _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 5

F5 / CPU Metric
by Michael Ebbels 18 Apr '16

18 Apr '16

Hi All, Receiving the follow error from a monitored F5 hardware appliance. The CPU usage reported is way out, anyone come across this or similar issue? See below. ALERT <observium(a)observium.org>Modify <http://pdcbigipmgt01.ch4.com.au/device/device=3/tab=alert/alert_entry=340/> *Alert*Processor usage is now greater than 80% for three subsequent tests. *Entity*TMM 0.6 Processor <http://pdcbigipmgt01.ch4.com.au/device/device=3/tab=health/metric=processor/> *Conditions*processor_usage greater 80 (4294967295)*Metrics*processor_usage = 4294967295 -- Michael

2 1

Is the site down?
by Matthew Andersen 17 Apr '16

17 Apr '16

Can't seem to get to http://www.observium.org. DNS can't be resolved.

2 1

Observium offline
by simonsmith5521＠gmail.com 16 Apr '16

16 Apr '16

Hi All I can't seem to access observium.org or the svn Repo? Is anyone else having an issue? Regards Simon Sent from my iPhone

1 0

Cannot add a device
by Артем А. Усов 16 Apr '16

16 Apr '16

Hello! I have installed new instance of observium with the official instruction on Debian 7.8 x64 Observium version is CE 0.16.1.7533. Tried to add a device via web-interface, result is: Could not resolve 192.168.0.2 And I can not add any device at all. In console: root@observium:/opt/observium# ./add_device.php 192.168.0.2 test v2c Observium CE 0.16.1.7533 Add Device(s) Try to add 192.168.0.2: Could not resolve 192.168.0.2. Devices failed: 1. ... root@observium:/opt/observium# fping 192.168.0.2 192.168.0.2 is alive root@observium:/opt/observium# snmpget -v2c -c test 192.168.0.2 sysDescr.0 SNMPv2-MIB::sysDescr.0 = STRING: Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 12.2(55)SE5, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2012 by Cisco Systems, Inc. Compiled Thu 09-Feb-12 19:22 by prod_rel_team root@observium:/opt/observium# What's the problem??? Can anyone help with this annoying thing?

2 1

add ssh option to device
by David Everitt 15 Apr '16

15 Apr '16

We have the option to connect to some devices via the options shown in the screenshot below: [image: Inline image 1] However, our switches (Force10) don't have those options. As shown below. [image: Inline image 2] Is there a way to add those options to devices that need them? Thank you,

2 1

SNMP MIB-Exclude
by Sathish Kumar Ippani 15 Apr '16

15 Apr '16

I want to exclude MIB for pCidrRouteTable && inetCidrRoute. But I am not able to find the file snmpd.conf Please suggest. #cd /etc/snmp/ root@observium /etc/snmp# ll total 12 drwxr-xr-x 2 root root 4096 Sep 3 2015 ./ drwxr-xr-x 103 root root 4096 Apr 13 12:28 ../ -rw-r--r-- 1 root root 28 Sep 3 2015 snmp.conf root@observium /etc/snmp#

2 1