- observium - lists.observium.org

Re: [Observium] Unix-Agent Not Working
by Cameron Murray 15 Apr '16

15 Apr '16

Hi Ron Thanks for the reply however the - was meant to be the _ (was going by memory when i wrote yhe email) and went through those instructions a number of times. When I tried to execute ./bind locally all but blank... Telnetung the server on the port returns alot of data however I could not see anything bind related however not 100% on what it'd going to display. Sent from my Samsung GALAXY S4 on the Telstra mobile network -------- Original message -------- From: Ron Marosko <ron(a)rjr-services.com> Date: 15/04/2016 9:04 pm (GMT+10:00) To: 'Observium Network Observation System' <observium(a)observium.org> Subject: Re: [Observium] Unix-Agent Not Working You should have been following the instructions located here: http://observium.org/docs/unix_agent/ Those are the instructions I follow, and have the unix agent working quite wonderfully. Based on what you described, “placing the Observium-agent and bind application in /usr/lib/Observium-agent/local” it would seem you didn’t follow the correct installation document, as “observium_agent” is to be installed in /usr/bin. You also don’t indicate whether you did the appropriate components with xinetd, that would similarly cause issues. Finally, inside the device properties on your observium server, you need to indicate the telnet port (36602) on the appropriate agent page, as well as enable the unix_agent function on the modules page. It’s really a much better idea to enable that only on a device-by-device basis as opposed to global enablement in the config.php file. Also, it’s worth changing directly to the /usr/lib/observium_agent/local directory and executing each script manually, this will determine if all the dependencies for each script are actually installed. For example, I use the ntpd monitoring script on my servers, and I don’t always have php installed on every server… so when I run the ./ntpd script, it kicks out an error that php isn’t installed. Duh, “apt-get php5-cli”, then I run the ntpd script again, and now I have valid data. I personally use nsd and unbound for authoritative and client lookups respectively instead of bind, so don’t have any experience with that bind script specifically. Maybe also try some of the other information gathering modules (dpkg, hddtemp, raspberrypi, etc., as appropriate) and see if those are also gathering information and being displayed on the server information page. …Ron From: observium [mailto:observium-bounces@observium.org] On Behalf Of Cameron Murray Sent: Thursday, April 14, 2016 11:29 PM To: Observium Network Observation System Subject: [Observium] Unix-Agent Not Working Guys, We’ve installed the Unix-Agent today on a DNS server in the hope of have Observium monitor bind. We’ve followed what documentation we could fine placing the Observium-agent and bind application in /usr/lib/Observium-agent/local and chmod –x all files We’ve tested via telnet on 36602 from the Observium machine and it returns the data however Observium does not report any application after polling the server. We have enabled the unix-agent in the config.php. Tia. Regards, Cameron Murray Senior Communications Manager How am I doing? Please click here<http://www.techpath.com.au/contact-us/feedback/> to rate my work. [cid:]<http://www.techpath.com.au/> P 1300 033 300 F 07 3809 3999 E cameron(a)techpath.com.au<mailto:cameron@techpath.com.au> www.techpath.com.au<http://www.techpath.com.au> Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 [Facebook]<http://www.facebook.com/techpathau> [Twitter]<http://twitter.com/techpathau> [LinkedIn]<http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. -- This message has been scanned for viruses and dangerous content by E.F.A. Project<http://www.efa-project.org>, and is believed to be clean. Click here to report this message as spam.<http://smtp.rjr-services.com/cgi-bin/learn-msg.cgi?id=3F0DC61E27.A7281&toke…>

1 1

graph in the mail alerts
by Sathish.I 15 Apr '16

15 Apr '16

Hello All, I am not able view the graph in the alerts as marked below. Please let us know changes I need to do. Regards, Sathish Ippani NSE Team CtrlS is India's First and Asia's largest Tier 4 Datacenter operating across India, USA, and UAE Follow us on <https://www.linkedin.com/company/ctrls-datacenters-ltd> Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/linkedin.jpg <https://twitter.com/CtrlSDC> Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/twitter.jpg <https://www.facebook.com/CtrlSDatacenters> Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/facebook.jpg Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/devider.jpg Description: Description: Description: Description: Description: Description: Ctrls Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/devider.jpg CtrlS Datacenters Ltd 16,Software Units Layout, Madapur (HitechCity), Hyderabad 500081, Telangana, India Mob: +91 9515600544 Tel : +91 (40) 420430700 Fax : +91 (40) 23116055

4 10

Unix-Agent Not Working
by Cameron Murray 15 Apr '16

15 Apr '16

Guys, We've installed the Unix-Agent today on a DNS server in the hope of have Observium monitor bind. We've followed what documentation we could fine placing the Observium-agent and bind application in /usr/lib/Observium-agent/local and chmod -x all files We've tested via telnet on 36602 from the Observium machine and it returns the data however Observium does not report any application after polling the server. We have enabled the unix-agent in the config.php. Tia. Regards, Cameron Murray Senior Communications Manager How am I doing? Please click here<http://www.techpath.com.au/contact-us/feedback/> to rate my work. [cid:image001.png@01D19723.124ED1E0]<http://www.techpath.com.au/> P 1300 033 300 F 07 3809 3999 E cameron(a)techpath.com.au www.techpath.com.au<http://www.techpath.com.au> Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 [Facebook]<http://www.facebook.com/techpathau> [Twitter]<http://twitter.com/techpathau> [LinkedIn]<http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd.

2 1

observium as SSH/Telnet Client
by Sathish Kumar Ippani 15 Apr '16

15 Apr '16

Hello, How do I use observium as SSH/Telnet Client. Regards. Sathish

2 3

Alerting on 95th percentile
by Danijel Starman 15 Apr '16

15 Apr '16

Hi, I'm little behind on the versions, is it possible to create an alert based on the 95th percentile values? Thnx! -- *blap*

2 2

(Not)Ignored Ports
by Robert Williams 14 Apr '16

14 Apr '16

Hi, It looks like ignored ports are suddenly being included in the 'Device Status Notifications' for Errors. We have quite a few devices which have 'expected' errors (half-duplex IP-PDUs etc.) so are now being spammed with error'ed ports: They _do_ disappear if I select the device itself to be ignored, but they used to be silenced just by setting the 'Alerts' column to 'No'. Is this an error - or is there now an intentional new variable which I need to set in config.php to ignore them? Cheers guys! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

4 13

Cisco Wireless Controller separate graphs for individual SSID's
by Gumilar Siegfried 14 Apr '16

14 Apr '16

Hi guys, I am using the professional edition of Observium. Everything works fine but I'm stuck at a certain point. Let me explain more exactly. We added a Cisco Wireless Controller (AIR-CT5508-K9) to observium. On this Cisco device there are some SSID's. So in Observium you can see under Cisco WC - Graphs - Wireless ONE GRAPH for the wireless clients traffic (for all SSID's). Is there a way to display the traffic graph separately for individual SSID's? The Wireless Controller delivers the OID's for the SSID's, but the question is how to implement them. Siegfried

1 0

Device discovery not complete
by Sathish Kumar Ippani 14 Apr '16

14 Apr '16

Hello, Sometime Device discovery not completes, not sure what is stopping. Regards, Sathish

1 0

subscription based install not processing update correctly
by Macklin, Jason 14 Apr '16

14 Apr '16

Hi, Processing "svn update" returns: [root@rphuvobservium observium]# svn update Updating '.': At revision 7748. [root@rphuvobservium observium]# pwd /opt/observium discovery.php -u returns: [root@rphuvobservium observium]# ./discovery.php -u ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 0.16.3.7703 http://www.observium.org -- Database is up to date. As you can see this version does not match the version that was just upgraded to. Also, at the webui the version still shows 0.16.3.7703 (stable). The system has even been rebooted since the upgrade to 7748. Is this normal behavior or are we missing something? -- *Jason Macklin* Lead Consultant - Sequencing Solution Center R&D Roche Molecular Systems | 4300 Hacienda Drive | Pleasanton, CA 94588 | USA T: +1 925 730 8458 | M: +1 925 353 7409 | E: *jason.macklin(a)roche.com <jason.macklin(a)roche.com>*

5 6

Monitor IPMI availability
by Vanya Golomehova 13 Apr '16

13 Apr '16

Hello! I'm wondering if there is a way to monitor the presence / availability of the IPMI module in Observium. Most if the servers are SuperMicro. I'm able to poll temperatures, fan speed and etc. through IPMI, but is there a way to receive an alert when IPMI module is not reachable (client often remove the cable to the interface by mistake, or some network issue) the same as I receive alerts for server down, port down. If there is no way, I will appreciate if someone suggest a workaround... -- Regards, Vanya Golomehova Technical support engineer at Extreme Broadband Services

2 5

Re: [Observium] errors on upgrade
by Jeffrey d'Ambly 13 Apr '16

13 Apr '16

So starting with a 100% new db I’m still getting these errors mysql> CREATE DATABASE observium DEFAULT CHARACTER SET utf8 COLLATE utf8_general_ci; Query OK, 1 row affected (0.00 sec) mysql> GRANT ALL PRIVILEGES ON observium.* TO 'observium'@'localhost' IDENTIFIED BY ‘*******'; Query OK, 0 rows affected (0.00 sec) mysql> exit Bye You have new mail in /var/spool/mail/root [root@sjc-corp-net01 observium]# ./discovery.php -u MySQL Error 1045: Access denied for user 'observium'@'localhost' (using password: YES) [root@sjc-corp-net01 observium]# vi config.php [root@sjc-corp-net01 observium]# ./discovery.php -u ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 0.16.4.7747 http://www.observium.org Install initial database schema ... FALSE. -- Updating database/file schema 000 -> 001 ... (db) done. 001 -> 002 ... (db) done (13 errors). 002 -> 003 ... (db) done (6 errors). 003 -> 004 ... (db) done (22 errors). 004 -> 005 ... (db) done (8 errors). 005 -> 006 ... (db) done (2 errors). 006 -> 007 ... (db) done. 007 -> 008 ... (db) done (1 errors). 008 -> 009 ... (db) done (9 errors). 009 -> 010 ... (db) done (1 errors). 010 -> 011 ... (db) done. 011 -> 012 ... (db) done. 012 -> 013 ... (db) done (1 errors). 013 -> 014 ... (db) done. 014 -> 015 ... (db) done (1 errors). 015 -> 016 ... (db) done (5 errors). 016 -> 017 ... (db) done (1 errors). 017 -> 018 ... (db) done (3 errors). 018 -> 019 ... (db) done. 019 -> 020 ... (db) done (6 errors). 020 -> 021 ... (db) done (3 errors). 021 -> 022 ... (db) done (1 errors). 022 -> 023 ... (db) done (2 errors). 023 -> 024 ... (db) done (2 errors). 024 -> 025 ... (db) done (8 errors). 025 -> 026 ... (db) done. 026 -> 027 ... (db) done (1 errors). 027 -> 028 ... (db) done (8 errors). 028 -> 029 ... (db) done. 029 -> 030 ... (db) done. 030 -> 031 ... (db) done (1 errors). 031 -> 032 ... (db) done (2 errors). 032 -> 033 ... (db) done. 033 -> 034 ... (db) done. 034 -> 035 ... (db) done. 035 -> 036 ... (db) done (1 errors). 036 -> 037 ... (db) done (2 errors). 037 -> 038 ... (db) done (1 errors). 038 -> 039 ... (db) done (1 errors). 039 -> 040 ... (db) done. 040 -> 041 ... (db) done. 041 -> 042 ... (db) done (3 errors). 042 -> 043 ... (db) done (7 errors). 043 -> 044 ... (db) done (2 errors). 044 -> 045 ... (db) done (2 errors). 045 -> 046 ... (db) done. 046 -> 047 ... (db) done. 047 -> 048 ... (db) done (1 errors). 048 -> 049 ... (db) done (1 errors). 049 -> 050 ... (db) done (1 errors). 050 -> 051 ... (db) done. 051 -> 052 ... (db) done (1 errors). 052 -> 053 ... (db) done (1 errors). 053 -> 054 ... (db) done (1 errors). 054 -> 055 ... (db) done (3 errors). 055 -> 056 ... (db) done (1 errors). 056 -> 057 ... (db) done (1 errors). 057 -> 058 ... (db) done (1 errors). 058 -> 059 ... (db) done (2 errors). 059 -> 060 ... (db) done (1 errors). 060 -> 061 ... (db) done (1 errors). 061 -> 062 ... (db) done (1 errors). 062 -> 063 ... (db) done (5 errors). 063 -> 064 ... (db) done (3 errors). 064 -> 065 ... (db) done (2 errors). 065 -> 066 ... (db) done (1 errors). 066 -> 067 ... (db) done (1 errors). 067 -> 068 ... (db) done (2 errors). 068 -> 069 ... (db) done (4 errors). 069 -> 070 ... (db) done (2 errors). 070 -> 071 ... (db) done (1 errors). 071 -> 072 ... (db) done (1 errors). 072 -> 073 ... (db) done. 073 -> 074 ... (php) Updating netscaler service RRDs 074 -> 075 ... (db) done (1 errors). 075 -> 076 ... (db) done (1 errors). 076 -> 077 ... (db) done (3 errors). 077 -> 078 ... (db) done. 078 -> 079 ... (db) done. 079 -> 080 ... (db) done (35 errors). 080 -> 081 ... (db) done (2 errors). 081 -> 082 ... (db) done (9 errors). 082 -> 083 ... (db) done. 083 -> 084 ... (db) done (2 errors). 084 -> 085 ... (db) done (3 errors). 085 -> 086 ... (db) done (1 errors). 086 -> 087 ... (db) done (2 errors). 087 -> 088 ... (db) done (1 errors). 088 -> 089 ... (db) done (5 errors). 089 -> 090 ... (db) done (3 errors). 090 -> 091 ... (db) done (1 errors). 091 -> 092 ... (db) done (1 errors). 092 -> 093 ... (db) done (3 errors). 093 -> 094 ... (db) done (1 errors). 094 -> 095 ... (php) Converting alert serialize() arrays to JSON: 095 -> 096 ... (db) done (1 errors). 096 -> 097 ... (db) done. 097 -> 098 ... (db) done (1 errors). 098 -> 099 ... (db) done (1 errors). 099 -> 100 ... (db) done (1 errors). 100 -> 101 ... (db) done (1 errors). 101 -> 102 ... (db) done (1 errors). 102 -> 103 ... (db) done (1 errors). 103 -> 104 ... (db) done (2 errors). 104 -> 105 ... (db) done. 105 -> 106 ... (db) done (2 errors). 106 -> 107 ... (db) done (1 errors). 107 -> 108 ... (db) done (1 errors). 108 -> 109 ... (db) done (1 errors). 109 -> 110 ... (db) done (3 errors). 110 -> 111 ... (db) done. 111 -> 112 ... (db) done. 112 -> 113 ... (db) done. 113 -> 114 ... (db) done (1 errors). 114 -> 115 ... (db) done (1 errors). 115 -> 116 ... (db) done (1 errors). 116 -> 117 ... (db) done. 117 -> 118 ... (db) done (1 errors). 118 -> 119 ... (db) done (19 errors). 119 -> 120 ... (db) done (1 errors). 120 -> 121 ... (db) done. 121 -> 122 ... (db) done (3 errors). 122 -> 123 ... (db) done (4 errors). 123 -> 124 ... (db) done. 124 -> 125 ... (db) done. 125 -> 126 ... (db) done (2 errors). 126 -> 127 ... (php) Converting FDB count RRD ds fdb->value: 127 -> 128 ... (php) Rename old storage RRDs and DB: 128 -> 129 ... (php) Rename old mempools RRDs and DB: 129 -> 130 ... (db) done. 130 -> 131 ... (db) done (1 errors). 131 -> 132 ... (db) done (1 errors). 132 -> 133 ... (db) done. 133 -> 134 ... (db) done (1 errors). 134 -> 135 ... (db) done (1 errors). 135 -> 136 ... (db) done (1 errors). 136 -> 137 ... (db) done. 137 -> 138 ... (db) done. 138 -> 139 ... (db) done (5 errors). 139 -> 140 ... (db) done (1 errors). 140 -> 141 ... (db) done (3 errors). 141 -> 142 ... (db) done (4 errors). 142 -> 143 ... (db) done (2 errors). 143 -> 144 ... (db) done (1 errors). 144 -> 145 ... (db) done. 145 -> 146 ... (db) done (1 errors). 146 -> 147 ... (db) done (1 errors). 147 -> 148 ... (db) done (3 errors). 148 -> 149 ... (db) done (3 errors). 149 -> 150 ... (db) done (7 errors). 150 -> 151 ... (db) done. 151 -> 152 ... (db) done. 152 -> 153 ... (php) 153 -> 154 ... (db) done. 154 -> 155 ... (db) done (1 errors). 155 -> 156 ... (db) done. 156 -> 157 ... (db) done (1 errors). 157 -> 158 ... (db) done (4 errors). 158 -> 159 ... (db) done (1 errors). 159 -> 160 ... (db) done (1 errors). 160 -> 161 ... (db) done. 161 -> 162 ... (db) done. 162 -> 163 ... (db) done (1 errors). 163 -> 164 ... (php) Superseded by update 165 164 -> 165 ... (php) Adding MIN RRA to very old RRD files: * hr_processes: * hr_users: * ucd_contexts: * ucd_load: * ucd_interrupts: 165 -> 166 ... (db) done (1 errors). 166 -> 167 ... (db) done (2 errors). 167 -> 168 ... (db) done. 168 -> 169 ... (db) done (2 errors). 169 -> 170 ... (php) Move old GEO data if exist: 170 -> 171 ... (db) done (1 errors). 171 -> 172 ... (db) done. 172 -> 173 ... (db) done (1 errors). 173 -> 174 ... (db) done (3 errors). 174 -> 175 ... (db) done (2 errors). 175 -> 176 ... (php) Clean incorrect syslog entries: 176 -> 177 ... (php) Clean incorrect manual geolocation: 177 -> 178 ... (db) done (7 errors). 178 -> 179 ... (db) done (2 errors). 179 -> 180 ... (db) done. 180 -> 181 ... (db) done (1 errors). 181 -> 182 ... (db) done. 182 -> 183 ... (db) done. 183 -> 184 ... (db) done (17 errors). 184 -> 185 ... (db) done. 185 -> 186 ... (db) done (10 errors). 186 -> 187 ... (php) 187 -> 188 ... (db) done (2 errors). 188 -> 189 ... (db) done (2 errors). 189 -> 190 ... (db) done (1 errors). 190 -> 191 ... (php) Migrating state sensors to status entries: 191 -> 192 ... (db) done (3 errors). 192 -> 193 ... (db) done (1 errors). 193 -> 194 ... (db) done (1 errors). 194 -> 195 ... (db) done. 195 -> 196 ... (db) done (2 errors). 196 -> 197 ... (db) done (1 errors). 197 -> 198 ... (db) done (1 errors). 198 -> 199 ... (db) done. 199 -> 200 ... (db) done (6 errors). 200 -> 201 ... (db) done (1 errors). 201 -> 202 ... (db) done (7 errors). 202 -> 203 ... (db) done. 203 -> 204 ... (db) done. 204 -> 205 ... (db) done. 205 -> 206 ... (db) done. 206 -> 207 ... (db) done. 207 -> 208 ... (db) done (1 errors). 208 -> 209 ... (db) done (7 errors). 209 -> 210 ... (php) 210 -> 211 ... (db) done (1 errors). 211 -> 212 ... (php) 212 -> 213 ... (db) done (3 errors). 213 -> 214 ... (db) done (1 errors). 214 -> 215 ... (db) done. 215 -> 216 ... (db) done (1 errors). 216 -> 217 ... (db) done. 217 -> 218 ... (db) done. 218 -> 219 ... (db) done. 219 -> 220 ... (db) done (1 errors). 220 -> 221 ... (db) done (1 errors). 221 -> 222 ... (db) done. 222 -> 223 ... (db) done (1 errors). 223 -> 224 ... (db) done. 224 -> 225 ... (db) done (2 errors). 225 -> 226 ... (db) done. 226 -> 227 ... (db) done (2 errors). 227 -> 228 ... (db) done (10 errors). 228 -> 229 ... (db) done. 229 -> 230 ... (db) done (1 errors). 230 -> 231 ... (db) done (1 errors). 231 -> 232 ... (db) done (1 errors). 232 -> 233 ... (db) done (2 errors). 233 -> 234 ... (db) done (1 errors). 234 -> 235 ... (db) done (2 errors). 235 -> 236 ... (db) done. 236 -> 237 ... (db) done. 237 -> 238 ... (db) done. 238 -> 239 ... (db) done (1 errors). 239 -> 240 ... (db) done (1 errors). 240 -> 241 ... (db) done. 241 -> 242 ... (db) done. 242 -> 243 ... (db) done. 243 -> 244 ... (db) done. 244 -> 245 ... (db) done (1 errors). 245 -> 246 ... (db) done. 246 -> 247 ... (db) done (1 errors). 247 -> 248 ... (db) done. 248 -> 249 ... (db) done (1 errors). 249 -> 250 ... (db) done (1 errors). 250 -> 251 ... (db) done. 251 -> 252 ... (db) done (5 errors). 252 -> 253 ... (db) done (1 errors). 253 -> 254 ... (db) done (1 errors). 254 -> 255 ... (db) done. 255 -> 256 ... (php) 256 -> 257 ... (php) 257 -> 258 ... (php) 258 -> 259 ... (db) done. 259 -> 260 ... (php) 260 -> 261 ... (db) done (5 errors). 261 -> 262 ... (php) 262 -> 263 ... (db) done (1 errors). 263 -> 264 ... (db) done (9 errors). 264 -> 265 ... (db) done. 265 -> 266 ... (db) done. 266 -> 267 ... (db) done (1 errors). 267 -> 268 ... (php) 268 -> 269 ... (php) 269 -> 270 ... (db) done. 270 -> 271 ... (db) done (3 errors). 271 -> 272 ... (db) done. 272 -> 273 ... (db) done (1 errors). 273 -> 274 ... (php) -- Done. [root@sjc-corp-net01 observium]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_sjccorpnet01-lv_root 50G 3.9G 43G 9% / tmpfs 127G 0 127G 0% /dev/shm /dev/sda1 477M 68M 384M 15% /boot /dev/mapper/vg_sjccorpnet01-lv_home 359G 282G 60G 83% /home [root@sjc-corp-net01 observium]# From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Adam Armstrong <adama(a)memetic.org<mailto:adama@memetic.org>> Reply-To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Date: Tuesday, April 12, 2016 at 11:48 PM To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Subject: Re: [Observium] errors on upgrade Yes. That looks like everything failed, and your database is probably now not something observium can properly interact with. Adam. Sent from BlueMail<http://www.bluemail.me/r> On Apr 13, 2016, at 07:46, Jeffrey d'Ambly <jeffrey.dambly(a)jasper.com<mailto:jeffrey.dambly@jasper.com>> wrote: Should I be worried about these errors? [root@sjc-corp-net01 observium]# ./discovery.php -u ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 0.16.4.7747 http://www.observium.org -- Updating database/file schema 195 -> 196 ... (db) done. 196 -> 197 ... (db) done. 197 -> 198 ... (db) done. 198 -> 199 ... (db) done. 199 -> 200 ... (db) done. 200 -> 201 ... (db) done. 201 -> 202 ... (db) done (1 errors). 202 -> 203 ... (db) done. 203 -> 204 ... (db) done. 204 -> 205 ... (db) done. 205 -> 206 ... (db) done. 206 -> 207 ... (db) done. 207 -> 208 ... (db) done. 208 -> 209 ... (db) done (4 errors). 209 -> 210 ... (php) 210 -> 211 ... (db) done (5 errors). 211 -> 212 ... (php) 212 -> 213 ... (db) done (11 errors). 213 -> 214 ... (db) done (2 errors). 214 -> 215 ... (db) done (3 errors). 215 -> 216 ... (db) done (1 errors). 216 -> 217 ... (db) done (1 errors). 217 -> 218 ... (db) done (1 errors). 218 -> 219 ... (db) done (1 errors). 219 -> 220 ... (db) done (4 errors). 220 -> 221 ... (db) done (1 errors). 221 -> 222 ... (db) done. 222 -> 223 ... (db) done (1 errors). 223 -> 224 ... (db) done. 224 -> 225 ... (db) done (2 errors). 225 -> 226 ... (db) done. 226 -> 227 ... (db) done (2 errors). 227 -> 228 ... (db) done (10 errors). 228 -> 229 ... (db) done (3 errors). 229 -> 230 ... (db) done (1 errors). 230 -> 231 ... (db) done (1 errors). 231 -> 232 ... (db) done (1 errors). 232 -> 233 ... (db) done (2 errors). 233 -> 234 ... (db) done (1 errors). 234 -> 235 ... (db) done (3 errors). 235 -> 236 ... (db) done (1 errors). 236 -> 237 ... (db) done. 237 -> 238 ... (db) done (1 errors). 238 -> 239 ... (db) done (1 errors). 239 -> 240 ... (db) done (3 errors). 240 -> 241 ... (db) done (1 errors). 241 -> 242 ... (db) done (4 errors). 242 -> 243 ... (db) done (1 errors). 243 -> 244 ... (db) done (6 errors). 244 -> 245 ... (db) done (1 errors). 245 -> 246 ... (db) done (1 errors). 246 -> 247 ... (db) done (2 errors). 247 -> 248 ... (db) done (2 errors). 248 -> 249 ... (db) done (1 errors). 249 -> 250 ... (db) done (1 errors). 250 -> 251 ... (db) done (1 errors). 251 -> 252 ... (db) done (5 errors). 252 -> 253 ... (db) done. 253 -> 254 ... (db) done. 254 -> 255 ... (db) done (2 errors). 255 -> 256 ... (php) 256 -> 257 ... (php) 257 -> 258 ... (php) 258 -> 259 ... (db) done. 259 -> 260 ... (php) 260 -> 261 ... (db) done (6 errors). 261 -> 262 ... (php) 262 -> 263 ... (db) done (1 errors). 263 -> 264 ... (db) done (9 errors). 264 -> 265 ... (db) done (1 errors). 265 -> 266 ... (db) done (2 errors). 266 -> 267 ... (db) done (1 errors). 267 -> 268 ... (php) 268 -> 269 ... (php) 269 -> 270 ... (db) done (1 errors). 270 -> 271 ... (db) done (10 errors). 271 -> 272 ... (db) done (5 errors). 272 -> 273 ... (db) done (2 errors). 273 -> 274 ... (php) -- Done. You have new mail in /var/spool/mail/root [root@sjc-corp-net01 observium]# ________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 3

errors on upgrade
by Jeffrey d'Ambly 13 Apr '16

13 Apr '16

Should I be worried about these errors? [root@sjc-corp-net01 observium]# ./discovery.php -u ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 0.16.4.7747 http://www.observium.org -- Updating database/file schema 195 -> 196 ... (db) done. 196 -> 197 ... (db) done. 197 -> 198 ... (db) done. 198 -> 199 ... (db) done. 199 -> 200 ... (db) done. 200 -> 201 ... (db) done. 201 -> 202 ... (db) done (1 errors). 202 -> 203 ... (db) done. 203 -> 204 ... (db) done. 204 -> 205 ... (db) done. 205 -> 206 ... (db) done. 206 -> 207 ... (db) done. 207 -> 208 ... (db) done. 208 -> 209 ... (db) done (4 errors). 209 -> 210 ... (php) 210 -> 211 ... (db) done (5 errors). 211 -> 212 ... (php) 212 -> 213 ... (db) done (11 errors). 213 -> 214 ... (db) done (2 errors). 214 -> 215 ... (db) done (3 errors). 215 -> 216 ... (db) done (1 errors). 216 -> 217 ... (db) done (1 errors). 217 -> 218 ... (db) done (1 errors). 218 -> 219 ... (db) done (1 errors). 219 -> 220 ... (db) done (4 errors). 220 -> 221 ... (db) done (1 errors). 221 -> 222 ... (db) done. 222 -> 223 ... (db) done (1 errors). 223 -> 224 ... (db) done. 224 -> 225 ... (db) done (2 errors). 225 -> 226 ... (db) done. 226 -> 227 ... (db) done (2 errors). 227 -> 228 ... (db) done (10 errors). 228 -> 229 ... (db) done (3 errors). 229 -> 230 ... (db) done (1 errors). 230 -> 231 ... (db) done (1 errors). 231 -> 232 ... (db) done (1 errors). 232 -> 233 ... (db) done (2 errors). 233 -> 234 ... (db) done (1 errors). 234 -> 235 ... (db) done (3 errors). 235 -> 236 ... (db) done (1 errors). 236 -> 237 ... (db) done. 237 -> 238 ... (db) done (1 errors). 238 -> 239 ... (db) done (1 errors). 239 -> 240 ... (db) done (3 errors). 240 -> 241 ... (db) done (1 errors). 241 -> 242 ... (db) done (4 errors). 242 -> 243 ... (db) done (1 errors). 243 -> 244 ... (db) done (6 errors). 244 -> 245 ... (db) done (1 errors). 245 -> 246 ... (db) done (1 errors). 246 -> 247 ... (db) done (2 errors). 247 -> 248 ... (db) done (2 errors). 248 -> 249 ... (db) done (1 errors). 249 -> 250 ... (db) done (1 errors). 250 -> 251 ... (db) done (1 errors). 251 -> 252 ... (db) done (5 errors). 252 -> 253 ... (db) done. 253 -> 254 ... (db) done. 254 -> 255 ... (db) done (2 errors). 255 -> 256 ... (php) 256 -> 257 ... (php) 257 -> 258 ... (php) 258 -> 259 ... (db) done. 259 -> 260 ... (php) 260 -> 261 ... (db) done (6 errors). 261 -> 262 ... (php) 262 -> 263 ... (db) done (1 errors). 263 -> 264 ... (db) done (9 errors). 264 -> 265 ... (db) done (1 errors). 265 -> 266 ... (db) done (2 errors). 266 -> 267 ... (db) done (1 errors). 267 -> 268 ... (php) 268 -> 269 ... (php) 269 -> 270 ... (db) done (1 errors). 270 -> 271 ... (db) done (10 errors). 271 -> 272 ... (db) done (5 errors). 272 -> 273 ... (db) done (2 errors). 273 -> 274 ... (php) -- Done. You have new mail in /var/spool/mail/root [root@sjc-corp-net01 observium]#

2 1

Adding an OS
by David Snowdon 13 Apr '16

13 Apr '16

Dear Observium, My apologies if this is not posted to the right place— this question must have been covered many times but the archives of this list don’t seem to be accessible. I am looking for how to add an OS for our devices ( https://www.metamako.com ). I found this documentation ( http://www.observium.org/docs/developing/add_os/ <http://www.observium.org/docs/developing/add_os/> ) but it seems to be out of date, since there doesn’t appear to be an includes/definitions/os.inc.php file. There’s a definitions.dat file, but this is a binary. Any assistance would be much appreciated. Do I need to be paid up for the subscription edition to make contributions? This seems backward as we would be able to promote Observium for use by our customers. Cheers, David Snowdon CTO, Metamako

2 1

More sensor issues with Dell equipment
by Martin 12 Apr '16

12 Apr '16

More sensor issues with Dell equipment: (S4810) SFP receive power reading returns only 0's (In cli reasonable values are shown), but I guess I have to yell at Dell for this one... CMD[/usr/bin/snmpbulkwalk -v2c -c *** -Pu -OQUs -m F10-S-SERIES-CHASSIS-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/force10 'udp':'***':'161' chSysPortXfpRecvPower] EXITCODE[0] CMD RUNTIME[0.0695s] STDOUT[ chSysPortXfpRecvPower.1.0 = .00 chSysPortXfpRecvPower.1.1 = .00 chSysPortXfpRecvPower.1.2 = .00 chSysPortXfpRecvPower.1.3 = .00 ... chSysPortXfpRecvPower.1.47 = .00 chSysPortXfpRecvPower.1.48 = .00 chSysPortXfpRecvPower.1.49 = .00 chSysPortXfpRecvPower.1.53 = .00 chSysPortXfpRecvPower.1.57 = .00 chSysPortXfpRecvPower.1.61 = .00 Same for chSysPortXfpTxPower. Anyone seen reasonable values for these variables in SNMP? Regards, Martin

1 0

Issue wih temperature reporting from Dell 7000 series switch
by Ric Davis 12 Apr '16

12 Apr '16

Hi All There's a small problem with temperature reporting from the Dell 7000 (specifically 7048 in this case) switch. The device page reports the stack unit internal temperature multiple times (I'd estimate >100), none of which look correct: I've copied and pasted the top and bottom of the reports, to show the way three of them read 0. The current firmware version is 5.1.8.2 - It was also present on the previous version of switch firmware we were running (from memory something like 5.1.0.1). I'd presume this is the result of the Dell SNMP response, but is there any kind of a workaround available? The devices web interface does report at least plausible temperature values, so it's unlikely to be a failing sensor. This is on the current CE, but was also present on the previous CE. The device event log has "3h 46m 57s Sensor deleted: temperature fastpath-boxservices-private-mib boxServicesStackTempSensorTemperature.1.1604 Stack Unit Internal Temperature 3h 46m 57s Sensor deleted: temperature fastpath-boxservices-private-mib boxServicesStackTempSensorTemperature.1.1603 Stack Unit Internal Temperature 3h 46m 57s Sensor deleted: temperature fastpath-boxservices-private-mib boxServicesStackTempSensorTemperature.1.1602 Stack Unit Internal Temperature 3h 46m 57s Sensor deleted: temperature fastpath-boxservices-private-mib boxServicesStackTempSensorTemperature.1.1601 Stack Unit Internal Temperature 3h 46m 57s Sensor deleted: temperature fastpath-boxservices-private-mib boxServicesStackTempSensorTemperature.1.1600 Stack Unit Internal Temperature 3h 46m 57s Sensor deleted: temperature fastpath-boxservices-private-mib boxServicesStackTempSensorTemperature.1.1599 Stack Unit Internal Temperature 3h 46m 57s Stack Unit Internal Temperature <http://observium/device/device=11/tab=health/metric=temperature/id=17570/> Sensor added: temperature fastpath-boxservices-private-mib boxServicesStackTempSensorTemperature.1.1772 Stack Unit Internal Temperature 3h 46m 57s Stack Unit Internal Temperature <http://observium/device/device=11/tab=health/metric=temperature/id=17569/> Sensor added: temperature fastpath-boxservices-private-mib boxServicesStackTempSensorTemperature.1.1771 Stack Unit Internal Temperature 3h 46m 57s Stack Unit Internal Temperature <http://observium/device/device=11/tab=health/metric=temperature/id=17568/> Sensor added: temperature fastpath-boxservices-private-mib boxServicesStackTempSensorTemperature.1.1770 Stack Unit Internal Temperature 3h 46m 57s Stack Unit Internal Temperature <http://observium/device/device=11/tab=health/metric=temperature/id=17567/> Sensor added: temperature fastpath-boxservices-private-mib boxServicesStackTempSensorTemperature.1.1769 Stack Unit Internal Temperature 3h 46m 57s Stack Unit Internal Temperature <http://observium/device/device=11/tab=health/metric=temperature/id=17566/> Sensor added: temperature fastpath-boxservices-private-mib boxServicesStackTempSensorTemperature.1.1768 Stack Unit Internal Temperature 3h 46m 57s Stack Unit Internal Temperature <http://observium/device/device=11/tab=health/metric=temperature/id=17565/> Sensor added: temperature fastpath-boxservices-private-mib boxServicesStackTempSensorTemperature.1.1767 Stack Unit Internal Temperature [image: Inline images 1] [image: Inline images 2] -- Ric

2 3

Run Alerts Checks
by Kevin Wormington 11 Apr '16

11 Apr '16

Hi, Is it possible to run the alert checks outside of the normal poll cycle? I have a simple perl script that receives SNMP traps and calls the snmptrap.php observium script and the interface is correctly marked down/up but the alert does not happen until the next poll cycle. Thanks, Kevin

2 1

Radwin 2000c as p2p-radios
by Luiz Gustavo Fernandes 11 Apr '16

11 Apr '16

I'm trying to monitor Radwin 2000c radios, but I'm having some difficulties, could someone tell me which files are needed for the Observium identify as p2p-radios? I've done to identify the OS, and set as $ type = "p2p-radios" Tks

1 0

APC PDU alert question
by Laszlo Nemeth 11 Apr '16

11 Apr '16

Hello I have some APC PDU with two lines of plugs. The name of the first row of plugs are: "Bank 1" and the second row's name is Bank 2. The two banks have a summarized current value, this is the "Bank Total". I would like to create an alert for the Bank 1 and Bank 2 (if the current ge 7 send an alert) but not for Bank Total. Device Entity Status Checked Changed Alerted pdu05 Bank 2 OK 2m 40s 14m 34s Never pdu05 Bank 1 OK 2m 40s 14m 34s Never pdu05 Bank Total OK 2m 40s 14m 35s Never pdu06 Bank 2 OK 2m 52s 14m 26s Never pdu06 Bank 1 OK 2m 52s 14m 26s Never pdu06 Bank Total OK 2m 52s 14m 26s Never If I add an alert where “Check conditions” is "sensor_value ge 7” and Associations “Device Match” is “hostname match pdu0*” it will be true for the Bank Total Entity too. There is any solution for alerting only for the Bank 1 and Bank2? Thanks Laszlo

2 1

Issues getting the unix-agent to work
by Lewis E. Bogan 10 Apr '16

10 Apr '16

After setting up my target host per instructions, I get this error: [2016/04/10 04:26:47 +0000] poller.php(6436): UNIX-AGENT: Connection on tcp://gitserver:33602 failed. ERROR: 111 Connection refused Selinux is disabled, firewall is disabled. I tried searching the mailing list archives but all I get is a 'not found' error. My server is running on CentOs7. I also tried Ubuntu14. My clients vary from Fedora, Centos7, and Ubuntu. I appreciate any and all assistance offered. Lewis

2 2

Syslog timestamps
by Jason Vanlandingham 09 Apr '16

09 Apr '16

When I look at a device's page, the syslog entries shown below are odd... Things that just happened will say "5h 20s". Hovering the mouse pointer over them shows the correct time on the entry. The Observium server and client I'm on both have the correct time. Are those time marks done using GMT? (I'm on Central DST, so that would make sense.) Can that be changed?

1 0

Help with Alert Check
by Eduardo Schoedler 08 Apr '16

08 Apr '16

Hi, I'm unable to make an alert checker work. As you can see, red alarm was triggered 1h12m ago. [image: Imagem inline 1] But the checker was not triggered: [image: Imagem inline 2] What I'm doing wrong? Thank you. Regards, -- Eduardo Schoedler

2 2

Zhone MXK Support on Observium
by ChanTy 08 Apr '16

08 Apr '16

Hi Does Observium support Zhone (http://www.zhone.com) ? Thanks, chanty

1 0

snmp.conf change for r7728 and up on Debian/Ubuntu
by Tom Laermans 07 Apr '16

07 Apr '16

Hi all, Due to a MIB move, if you svn up to the latest release, you might encounter silly output from the SNMP library in PHP. This is the case if you have the php5-snmp module installed, and have added our mib directory to /etc/snmp/snmp.conf. To fix this, replace: mibdirs /opt/observium/mibs by mibdirs /opt/observium/mibs:/opt/observium/mibs/net-snmp I've updated the install docs to reflect this. Tom

1 0

Fwd: Front Page incorrectly displaying ports - Subscription Edition
by Serghei Golipad 07 Apr '16

07 Apr '16

Hi Guys, No-one has responded to me so far, I have 5 ports DOWN yet main page is displaying 37 of them are: [cid:F145DDEA-98D9-4D97-AAC7-3A23EC58D7D8] [cid:F5C88FDC-C740-49AF-BCFC-47830781078A] Any ideas? Thank you PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

2 6

No Auth_Mechanisms defined to add user
by David Shirk 06 Apr '16

06 Apr '16

All, So I followed the install process to a T, and it was going very well until I hit this: ./adduser.php <my username> <my Password> 10Observium CE 0.16.1.7533Add User ERROR: no valid auth_mechanism defined. I am running Debian 7 VM, and all dependencies are there. $config['auth_mechanism] = "mysql"; is in the config.php Anyone else run into this before?

1 0